TY - JOUR A1 - Chen, Lu A1 - Yan, Runyu A1 - Oschatz, Martin A1 - Jiang, Lei A1 - Antonietti, Markus A1 - Xiao, Kai T1 - Ultrathin 2D graphitic carbon nitride on metal films BT - underpotential sodium deposition in adlayers for sodium-ion batteries JF - Angewandte Chemie : a journal of the Gesellschaft Deutscher Chemiker ; International edition N2 - Efficient and low-cost anode materials for the sodium-ion battery are highly desired to enable more economic energy storage. Effects on an ultrathin carbon nitride film deposited on a copper metal electrode are presented. The combination of effects show an unusually high capacity to store sodium metal. The g-C3N4 film is as thin as 10 nm and can be fabricated by an efficient, facile, and general chemical-vapor deposition method. A high reversible capacity of formally up to 51 Ah g(-1) indicates that the Na is not only stored in the carbon nitride as such, but that carbon nitride activates also the metal for reversible Na-deposition, while forming at the same time an solid electrolyte interface layer avoiding direct contact of the metallic phase with the liquid electrolyte. KW - 2D films KW - carbon nitride KW - chemical vapor deposition KW - sodium-ion KW - batteries KW - underpotential deposition Y1 - 2020 U6 - https://doi.org/10.1002/anie.202000314 SN - 1433-7851 SN - 1521-3773 VL - 59 IS - 23 SP - 9067 EP - 9073 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Xie, Dongjiu A1 - Mei, Shilin A1 - Xu, Yaolin A1 - Quan, Ting A1 - Haerk, Eneli A1 - Kochovski, Zdravko A1 - Lu, Yan T1 - Efficient sulfur host based on yolk-shell iron oxide/sulfide-carbon nanospindles for lithium-sulfur batteries JF - ChemSusChem : chemistry, sustainability, energy, materials N2 - Numerous nanostructured materials have been reported as efficient sulfur hosts to suppress the problematic "shuttling" of lithium polysulfides (LiPSs) in lithium-sulfur (Li-S) batteries. However, direct comparison of these materials in their efficiency of suppressing LiPSs shuttling is challenging, owing to the structural and morphological differences between individual materials. This study introduces a simple route to synthesize a series of sulfur host materials with the same yolk-shell nanospindle morphology but tunable compositions (Fe3O4, FeS, or FeS2), which allows for a systematic investigation into the specific effect of chemical composition on the electrochemical performances of Li-S batteries. Among them, the S/FeS2-C electrode exhibits the best performance and delivers an initial capacity of 877.6 mAh g(-1) at 0.5 C with a retention ratio of 86.7 % after 350 cycles. This approach can also be extended to the optimization of materials for other functionalities and applications. KW - batteries KW - electrode materials KW - lithium sulfides KW - yolk-shell KW - nanostructures Y1 - 2021 U6 - https://doi.org/10.1002/cssc.202002731 SN - 1864-5631 SN - 1864-564X VL - 14 IS - 5 SP - 1404 EP - 1413 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Xie, Dongjiu A1 - Xu, Yaolin A1 - Wang, Yonglei A1 - Pan, Xuefeng A1 - Härk, Eneli A1 - Kochovski, Zdravko A1 - Eljarrat, Alberto A1 - Müller, Johannes A1 - Koch, Christoph T. A1 - Yuan, Jiayin A1 - Lu, Yan T1 - Poly(ionic liquid) nanovesicle-templated carbon nanocapsules functionalized with uniform iron nitride nanoparticles as catalytic sulfur host for Li-S batteries JF - ACS nano N2 - Poly(ionic liquid)s (PIL) are common precursors for heteroatom-doped carbon materials. Despite a relatively higher carbonization yield, the PIL-to-carbon conversion process faces challenges in preserving morphological and structural motifs on the nanoscale. Assisted by a thin polydopamine coating route and ion exchange, imidazoliumbased PIL nanovesicles were successfully applied in morphology-maintaining carbonization to prepare carbon composite nanocapsules. Extending this strategy further to their composites, we demonstrate the synthesis of carbon composite nanocapsules functionalized with iron nitride nanoparticles of an ultrafine, uniform size of 3-5 nm (termed "FexN@C "). Due to its unique nanostructure, the sulfur-loaded FexN@C electrode was tested to efficiently mitigate the notorious shuttle effect of lithium polysulfides (LiPSs) in Li-S batteries. The cavity of the carbon nanocapsules was spotted to better the loading content of sulfur. The well-dispersed iron nitride nanoparticles effectively catalyze the conversion of LiPSs to Li2S, owing to their high electronic conductivity and strong binding power to LiPSs. Benefiting from this well-crafted composite nanostructure, the constructed FexN@C/S cathode demonstrated a fairly high discharge capacity of 1085 mAh g(-1) at 0.5 C initially, and a remaining value of 930 mAh g(-1 )after 200 cycles. In addition, it exhibits an excellent rate capability with a high initial discharge capacity of 889.8 mAh g(-1) at 2 C. This facile PIL-to-nanocarbon synthetic approach is applicable for the exquisite design of complex hybrid carbon nanostructures with potential use in electrochemical energy storage and conversion. KW - poly(ionic liquid)s KW - nanovesicles KW - sulfur host KW - iron nitride KW - Li-S KW - batteries Y1 - 2022 U6 - https://doi.org/10.1021/acsnano.2c01992 SN - 1936-0851 SN - 1936-086X VL - 16 IS - 7 SP - 10554 EP - 10565 PB - American Chemical Society CY - Washington ER -