TY - GEN A1 - Wessig, Pablo A1 - John, Leonard A1 - Sperlich, Eric A1 - Kelling, Alexandra T1 - Sulfur tuning of [1,3]-dioxolo[4.5-f]benzodioxole (DBD) fluorescent dyes T2 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - The replacement of oxygen by sulfur atoms of [1,3]-dioxolo[4.5-f]benzodioxole (DBD) fluorescent dyes is an efficient way to adjust the photophysical properties (sulfur tuning). While previously developed S-4-DBD dyes exhibit considerably red-shifted absorption and emission wavelength, the heavy atom effect of four sulfur atoms cause low fluorescence quantum yields and short fluorescence lifetimes. Herein, we demonstrate that the replacement of less than four sulfur atoms (S-1-DBD, 1,2-S-2-DBD, and 1,4-S-2-DBD dyes) permits a fine-tuning of the photophysical properties. In some cases, a similar influence on the wavelength without the detrimental effect on the quantum yields and lifetimes is observed. Furthermore, the synthetic accessibility of S-1- and S-2-DBD dyes is improved, compared with S-4-DBD dyes. For coupling with biomolecules a series of reactive derivatives of the new dyes were developed (azides, OSu esters, alkynes, maleimides). T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1381 KW - fluorescent dyes KW - heterocycles KW - photophysics KW - stokes shift KW - sulfur Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-566241 SN - 1866-8372 IS - 3 ER - TY - JOUR A1 - Haubitz, Toni A1 - John, Leonard A1 - Freyse, Daniel A1 - Wessig, Pablo A1 - Kumke, Michael Uwe T1 - Investigating the Sulfur "Twist" on the Photophysics of DBD Dyes JF - The journal of physical chemistry : A, Molecules, spectroscopy, kinetics, environment & general theory N2 - The so-called DBD ([1,3]dioxolo[4,5-f][1,3]benzodioxole) dyes are a new class of fluorescent dyes, with tunable photophysical properties like absorption, fluorescence lifetime, and Stokes shift. With the development of sulfur based DBDs, this dye class is extended even further for possible applications in spectroscopy and microscopy. In this paper we are investigating the basic photophysical properties and their implications for future applications for S-4-DBD as well as O-4-DBD. On the basis of time-resolved laser fluorescence spectroscopy, transient absorption spectroscopy, and UV/vis-spectroscopy, we determined the rate constants of the radiative and nonradiative deactivation processes as well as the energy of respective electronic states involved in the electronic deactivation of S-4-DBD and of O-4-DBD. For S-4-DBD we unraveled the triplet formation with intersystem crossing quantum yields of up to 80%. By TD-DFT calculations we estimated a triplet energy of around 13500-14700 cm(-1) depending on the DBD dye and solvent. Through solvent dependent measurements, we found quadrupole moments in the range of 2 B. Y1 - 2020 U6 - https://doi.org/10.1021/acs.jpca.0c01880 SN - 1089-5639 SN - 1520-5215 VL - 124 IS - 22 SP - 4345 EP - 4353 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Wessig, Pablo A1 - John, Leonard A1 - Sperlich, Eric A1 - Kelling, Alexandra T1 - Sulfur tuning of [1,3]-dioxolo[4.5-f]benzodioxole (DBD) fluorescent dyes JF - European journal of organic chemistry N2 - The replacement of oxygen by sulfur atoms of [1,3]-dioxolo[4.5-f]benzodioxole (DBD) fluorescent dyes is an efficient way to adjust the photophysical properties (sulfur tuning). While previously developed S-4-DBD dyes exhibit considerably red-shifted absorption and emission wavelength, the heavy atom effect of four sulfur atoms cause low fluorescence quantum yields and short fluorescence lifetimes. Herein, we demonstrate that the replacement of less than four sulfur atoms (S-1-DBD, 1,2-S-2-DBD, and 1,4-S-2-DBD dyes) permits a fine-tuning of the photophysical properties. In some cases, a similar influence on the wavelength without the detrimental effect on the quantum yields and lifetimes is observed. Furthermore, the synthetic accessibility of S-1- and S-2-DBD dyes is improved, compared with S-4-DBD dyes. For coupling with biomolecules a series of reactive derivatives of the new dyes were developed (azides, OSu esters, alkynes, maleimides). KW - fluorescent dyes KW - heterocycles KW - photophysics KW - stokes shift KW - sulfur Y1 - 2020 U6 - https://doi.org/10.1002/ejoc.202001418 SN - 1434-193X SN - 1099-0690 VL - 2021 IS - 3 SP - 499 EP - 511 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Wessig, Pablo A1 - John, Leonard A1 - Mertens, Monique T1 - Extending the Class of [1,3]-Dioxolo[4.5-f]benzodioxole (DBD) Fluorescent Dyes JF - European journal of organic chemistry N2 - Synthetic routes to a collection of new fluorescent dyes are described, which are based on the [1,3]-dioxolo[4.5-f]benzodioxole (DBD) core. By introducing different electron withdrawing groups in 4- and 8-position of the DBD moiety the emission wavelength could be adjusted over a large spectral range from blue to orange light. KW - Functional organic materials KW - Fluorescence KW - DBD dyes KW - Large Stokes shifts KW - Aryllithium compounds KW - Heterocycles Y1 - 2018 U6 - https://doi.org/10.1002/ejoc.201800002 SN - 1434-193X SN - 1099-0690 VL - 2018 IS - 14 SP - 1674 EP - 1681 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Büchner, Dörthe A1 - John, Leonard A1 - Mertens, Monique A1 - Wessig, Pablo T1 - Detection of dsDNA with [1,3]Dioxolo[4,5-f]benzodioxol (DBD) Dyes JF - Chemistry - a European journal N2 - DBD fluorescent dyes have proven to be useful in numerous applications. To widen the range of biological applications, we propose three different types of DBD molecules that have been modified in such a way that DNA interaction becomes probable. After the successful synthesis of all three compounds, we tested their fluorescent properties and their DNA binding abilities. Two of the three probes exhibit an interaction with dsDNA with subsequent fluorescence enhancement. The determined binding constants of the two new DNA dyes are comparable to other minorgroove-binding dyes. Their large Stokes shifts and their long fluorescent lifetimes are outstanding features of these dyes. KW - DNA recognition KW - dyes/pigments KW - fluorescent probes KW - heterocycles KW - scatchard plot Y1 - 2018 U6 - https://doi.org/10.1002/chem.201804057 SN - 0947-6539 SN - 1521-3765 VL - 24 IS - 60 SP - 16183 EP - 16190 PB - Wiley-VCH CY - Weinheim ER - TY - THES A1 - John, Leonard T1 - Neuartige DBD-Fluoreszenzfarbstoffe T1 - Novel DBD-fluorescent dyes BT - Synthese, Untersuchungen und Anwendungen BT - synthesis, investigations and applications N2 - Zusammenfassung zur Dissertation „Neuartige DBD-Fluoreszenzfarbstoffe: Synthese, Untersuchungen und Anwendungen“ von Leonard John In dieser Arbeit konnten auf Basis der etablierten [1,3]-Dioxolo[4,5-f][1,3]benzodioxol (DBD) Fluoreszenzfarbstoffe zwei neue Konzepte zur Darstellung unsymmetrisch funktionalisierter DBD-Fluorophore entwickelt werden. Die Variation der elektronenziehenden Reste führte zu einer Erweiterung des Farbspektrums an DBD-Fluorophoren, wobei alle weiteren spektroskopischen Parameter (Fluoreszenzlebenszeit, -quantenausbeute und STOKES-Verschiebung) unverändert hohe Werte aufweisen. Neben der Variation der elektronenziehenden Reste wurde das "pi"-System des DBD-Farbstoffs mit der Einführung von Stilben-, und Tolan-Derivaten vergrößert. Stilben-Derivate zeigten ähnlich gute spektroskopische Eigenschaften wie die bereits etablierten DBD-Farbstoffe. Fluorophore mit langwelliger Emission sind auf Grund der großen Gewebe-Eindringtiefe besonders interessant für biologische Anwendungen. Da der langwelligste Vertreter der O4-DBD-Farbstoffe in polaren Medien nur schwer löslich ist, wurde ein Weg zur Einführung löslichkeitsvermittelnder Gruppen gesucht. Hierbei fiel die Wahl auf eine Carbonsäure-Gruppe zur Steigerung der Hydrophilie. Eine von vier untersuchten Methoden erwies sich als zielführend, sodass das gewünschte Molekül isoliert werden konnte. Eine erhöhte Wasserlöslichkeit wurde allerdings nicht beobachtet. Zur Erforschung von Fettstoffwechselkrankheiten wie der ALZHEIMER-Krankheit werden fluoreszenzmarkierte Lipide benötigt. Um unterschiedliche Bereiche einer Membran zu untersuchen, war das Ziel, den Fluorophor an unterschiedlichen Stellen innerhalb der Fettsäure zu lokalisieren. Hierbei sollte die Gesamtkettenlänge des DBD-Lipids einer C18-Kette, analog der Stearinsäure, entsprechen. Durch die stufenweise Einführung der Reste gelang es, drei DBD-Lipide herzustellen, wobei sich der Fluorophor an unterschiedlichen Positionen innerhalb der Kette befindet. Die photophysikalischen Eigenschaften der Lipide weichen nur marginal von denen der reinen Fluorophore ab. Eine Einlagerung in giant unilamellar vesicles (GUVs) konnte für zwei Derivate beobachtet werden, wobei keine domänenspezifisch war. Ein weiteres Ziel dieser Arbeit war es, die vier Sauerstoffatome im DBD-Grundkörper stufenweise durch Schwefelatome zu ersetzen und die Ringgrößen des DBD-Fluorophors zu variieren. Für die Ringgröße zeigte der 1,2-S2-DBD mit jeweils zwei Fünfringen die besten spektroskopischen Eigenschaften. Durch die Synthese von zwei weiteren schwefelhaltigen DBD-Grundkörpern (S1- und 1,4-S2-DBD) konnten insgesamt drei neue Farbstoffklassen zugänglich gemacht werden. Für alle neuen Chromophore wurden elektronenziehende Reste (Aldehyd, Acyl, Ester, Carboxy) eingeführt und die jeweiligen Derivate spektroskopisch untersucht. Mit steigender Anzahl an Schwefel-Atomen im Grundkörper zeigt sich eine bathochrome Verschiebung der Emission, wobei die Werte für die Fluoreszenzlebenszeit- und -quantenausbeute abnehmen. Die optimalen spektroskopischen Eigenschaften aus langwelliger Emission, hoher Fluoreszenzlebenszeit und -quantenausbeute zeigt das 1,4-S2-Dialdehyd-Derivat. Für die S1- und 1,2-S2-Dialdehyd- Derivate wurden Konzepte entwickelt, um bioreaktive Reste (Alkin, HOSu, Maleimid) einzuführen und die Fluorophore in biologischen Systemen anwenden zu können. N2 - Abstract for the Dissertation „Neuartige DBD-Fluoreszenzfarbstoffe: Synthese, Untersuchungen und Anwendungen“ by Leonard John In this work, two new concepts for the preparation of asymmetrically functionalized DBD fluorophores were developed based on the established [1,3]dioxolo[4,5-f][1,3]benzodioxole (DBD) fluorescent dyes. Variation of the electron-withdrawing groups led to an expansion of the color spectrum of DBD fluorophores, with all other spectroscopic parameters (fluorescence lifetime, quantum yield, and STOKES- shift) showing unchanged high values. In addition to the variation of electron-withdrawing groups, the "pi"-system of the DBD dye was enlarged with the introduction of stilbene, and tolane derivatives. Stilbene derivatives showed similar good spectroscopic properties as the already established DBD dyes. Fluorophores with long wavelength emission are particularly interesting for biological applications due to their large tissue penetration depth. Since the longest wavelength representative of the O4-DBD dyes is poorly soluble in polar media, a way to introduce solubility-mediating groups was sought. Here, the choice fell on a carboxylic acid group to increase hydrophilicity. One of four methods investigated proved to be effective, so that the desired molecule could be isolated. However, increased water solubility was not observed. Fluorescently labeled lipids are needed to study lipid metabolism diseases such as ALZHEIMER disease. In order to study different areas of a membrane, the goal was to localize the fluorophore at different sites within the fatty acid. Here, the total chain length of the DBD lipid should correspond to a C18 chain, analogous to stearic acid. By introducing the residues stepwise, it was possible to prepare three DBD lipids with the fluorophore located at different positions within the chain. The photophysical properties of the lipids differ only marginally from those of the pure fluorophores. Incorporation into giant unilamellar vesicles (GUVs) was observed for two derivatives, although none was domain specific. Another goal of this work was to gradually replace the four oxygen atoms in the DBD parent with sulfur atoms and to vary the ring sizes of the DBD fluorophore. For the ring size, the 1,2-S2-DBD with two five-membered rings each showed the best spectroscopic properties. The synthesis of two additional sulfur-containing DBD precursors (S1- and 1,4-S2-DBD) made a total of three new dye classes accessible. Electron-withdrawing residues (aldehyde, acyl, ester, carboxy) were introduced for all new chromophores and the respective derivatives were investigated spectroscopically. As the number of sulfur atoms in the parent compound increases, a bathochromic shift in emission is seen, with decreasing values for fluorescence lifetime and quantum yield. The optimal spectroscopic properties of long wavelength emission, high fluorescence lifetime and quantum yield are exhibited by the 1,4-S2-dialdehyde derivative. For the S1- and 1,2-S2-dialdehyde derivatives, concepts were developed to introduce bioreactive residues (alkyne, HOSu, maleimide) and to apply the fluorophores in biological systems. KW - Organische Chemie KW - Fluoreszenzfarbstoffe KW - DBD-Farbstoffe KW - Schwefel KW - sulfur KW - DBD-dyes KW - fluorescent dyes KW - organic chemistry Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-510487 ER - TY - JOUR A1 - López de Guereñu, Anna A1 - Bastian, Philipp A1 - Wessig, Pablo A1 - John, Leonard A1 - Kumke, Michael Uwe T1 - Energy Transfer between Tm-Doped Upconverting Nanoparticles and a Small Organic Dye with Large Stokes Shift JF - Biosensors : open access journal N2 - Lanthanide-doped upconverting nanoparticles (UCNP) are being extensively studied for bioapplications due to their unique photoluminescence properties and low toxicity. Interest in RET applications involving UCNP is also increasing, but due to factors such as large sizes, ion emission distributions within the particles, and complicated energy transfer processes within the UCNP, there are still many questions to be answered. In this study, four types of core and core-shell NaYF4-based UCNP co-doped with Yb3+ and Tm3+ as sensitizer and activator, respectively, were investigated as donors for the Methyl 5-(8-decanoylbenzo[1,2-d:4,5-d ']bis([1,3]dioxole)-4-yl)-5-oxopentanoate (DBD-6) dye. The possibility of resonance energy transfer (RET) between UCNP and the DBD-6 attached to their surface was demonstrated based on the comparison of luminescence intensities, band ratios, and decay kinetics. The architecture of UCNP influenced both the luminescence properties and the energy transfer to the dye: UCNP with an inert shell were the brightest, but their RET efficiency was the lowest (17%). Nanoparticles with Tm3+ only in the shell have revealed the highest RET efficiencies (up to 51%) despite the compromised luminescence due to surface quenching. KW - resonance energy transfer KW - DBD dye KW - core shell UCNP KW - time-resolved luminescence Y1 - 2019 U6 - https://doi.org/10.3390/bios9010009 SN - 2079-6374 VL - 9 IS - 1 PB - MDPI CY - Basel ER - TY - GEN A1 - Schwarze, Thomas A1 - Riemer, Janine A1 - Müller, Holger A1 - John, Leonard A1 - Holdt, Hans‐Jürgen A1 - Wessig, Pablo T1 - Na+ Selective Fluorescent Tools Based on Fluorescence Intensity Enhancements, Lifetime Changes, and on a Ratiometric Response T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Over the years, we developed highly selective fluorescent probes for K+ in water, which show K+-induced fluorescence intensity enhancements, lifetime changes, or a ratiometric behavior at two emission wavelengths (cf. Scheme 1, K1-K4). In this paper, we introduce selective fluorescent probes for Na+ in water, which also show Na+ induced signal changes, which are analyzed by diverse fluorescence techniques. Initially, we synthesized the fluorescent probes 2, 4, 5, 6 and 10 for a fluorescence analysis by intensity enhancements at one wavelength by varying the Na+ responsive ionophore unit and the fluorophore moiety to adjust different K-d values for an intra- or extracellular Na+ analysis. Thus, we found that 2, 4 and 5 are Na+ selective fluorescent tools, which are able to measure physiologically important Na+ levels at wavelengths higher than 500 nm. Secondly, we developed the fluorescent probes 7 and 8 to analyze precise Na+ levels by fluorescence lifetime changes. Herein, only 8 (K-d=106 mm) is a capable fluorescent tool to measure Na+ levels in blood samples by lifetime changes. Finally, the fluorescent probe 9 was designed to show a Na+ induced ratiometric fluorescence behavior at two emission wavelengths. As desired, 9 (K-d=78 mm) showed a ratiometric fluorescence response towards Na+ ions and is a suitable tool to measure physiologically relevant Na+ levels by the intensity change of two emission wavelengths at 404 nm and 492 nm. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1136 KW - crown compounds KW - fluorescence lifetime KW - fluorescent probes KW - ratiometric KW - sodium Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-437482 SN - 1866-8372 IS - 1136 ER - TY - JOUR A1 - Haubitz, Toni A1 - John, Leonard A1 - Wessig, Pablo A1 - Kumke, Michael Uwe T1 - Photophysics of Acyl- and Ester-DBD Dyes BT - Quadrupole-Induced Solvent Relaxation Investigated by Transient Absorption Spectroscopy JF - the journal of physical chemistry : A, Molecules, spectroscopy, kinetics, environment & general theory N2 - A new generation of wavelength-tunable, fluorescent dyes, so-called DBD ([1,3]dioxolo[4,5-f][1,3]benzodioxole) dyes, were developed a few years ago, and they showed great potential as probes, for example, for fluorescence microscopy. However, their photophysics is not fully explored and leaves open questions regarding their large fluorescence Stokes shifts and sensitivity to solvent conditions of differently substituted DBD dyes. To improve the understanding of the influence of the substitution pattern of the DBD dyes on their respective photophysics, transient absorption spectroscopy (TAS) was used, that is, a pump-probe experiment on the femtosecond timescale. TAS allows measurements of excited states, ground state recovery, solvent relaxation, and fluorescence properties on time scales of up to several nanoseconds. Two different DBD dye samples were investigated: aryl- and ester-substituted DBD dyes. Experiments were carried out in solvents with different polarities using different excitation energies and at different viscosities. Based on the experimental data and theoretical calculations, we were able to determine the conformational changes of the molecule due to electronic excitation and were able to investigate solvent relaxation processes for both types of DBD dyes. By generalizing the theory for quadrupole-induced solvent relaxation developed by Togashi et al., we derived quadrupole moments of both molecules in the ground and excited state. Our data showed differences in the binding of polar solvent molecules to the dyes depending on the substituent on the DBD dye. In the case of water as the solvent, an additional efficient quenching process in the electronically excited state was revealed, which was indicated by the observation of solvated electrons in the TAS signals. Y1 - 2019 U6 - https://doi.org/10.1021/acs.jpca.9b02973 SN - 1089-5639 VL - 123 IS - 22 SP - 4717 EP - 4726 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Schwarze, Thomas A1 - Riemer, Janine A1 - Müller, Holger A1 - John, Leonard A1 - Holdt, Hans-Jürgen A1 - Wessig, Pablo T1 - Na+ Selective Fluorescent Tools Based on Fluorescence Intensity Enhancements, Lifetime Changes, and on a Ratiometric Response JF - Chemistry - a European journal N2 - Over the years, we developed highly selective fluorescent probes for K+ in water, which show K+-induced fluorescence intensity enhancements, lifetime changes, or a ratiometric behavior at two emission wavelengths (cf. Scheme 1, K1-K4). In this paper, we introduce selective fluorescent probes for Na+ in water, which also show Na+ induced signal changes, which are analyzed by diverse fluorescence techniques. Initially, we synthesized the fluorescent probes 2, 4, 5, 6 and 10 for a fluorescence analysis by intensity enhancements at one wavelength by varying the Na+ responsive ionophore unit and the fluorophore moiety to adjust different K-d values for an intra- or extracellular Na+ analysis. Thus, we found that 2, 4 and 5 are Na+ selective fluorescent tools, which are able to measure physiologically important Na+ levels at wavelengths higher than 500 nm. Secondly, we developed the fluorescent probes 7 and 8 to analyze precise Na+ levels by fluorescence lifetime changes. Herein, only 8 (K-d=106 mm) is a capable fluorescent tool to measure Na+ levels in blood samples by lifetime changes. Finally, the fluorescent probe 9 was designed to show a Na+ induced ratiometric fluorescence behavior at two emission wavelengths. As desired, 9 (K-d=78 mm) showed a ratiometric fluorescence response towards Na+ ions and is a suitable tool to measure physiologically relevant Na+ levels by the intensity change of two emission wavelengths at 404 nm and 492 nm. KW - crown compounds KW - fluorescence lifetime KW - fluorescent probes KW - ratiometric KW - sodium Y1 - 2019 U6 - https://doi.org/10.1002/chem.201902536 SN - 0947-6539 SN - 1521-3765 VL - 25 IS - 53 SP - 12412 EP - 12422 PB - Wiley-VCH CY - Weinheim ER - TY - GEN A1 - López de Guereñu, Anna A1 - Bastian, Philipp A1 - Wessig, Pablo A1 - John, Leonard A1 - Kumke, Michael Uwe T1 - Energy transfer between tm-doped upconverting nanoparticles and a small organic dye with large stokes shift T2 - Postprints der Universität Potsdam : Mathematisch Naturwissenschaftliche Reihe N2 - Lanthanide-doped upconverting nanoparticles (UCNP) are being extensively studied for bioapplications due to their unique photoluminescence properties and low toxicity. Interest in RET applications involving UCNP is also increasing, but due to factors such as large sizes, ion emission distributions within the particles, and complicated energy transfer processes within the UCNP, there are still many questions to be answered. In this study, four types of core and core-shell NaYF4-based UCNP co-doped with Yb3+ and Tm3+ as sensitizer and activator, respectively, were investigated as donors for the Methyl 5-(8-decanoylbenzo[1,2-d:4,5-d ']bis([1,3]dioxole)-4-yl)-5-oxopentanoate (DBD-6) dye. The possibility of resonance energy transfer (RET) between UCNP and the DBD-6 attached to their surface was demonstrated based on the comparison of luminescence intensities, band ratios, and decay kinetics. The architecture of UCNP influenced both the luminescence properties and the energy transfer to the dye: UCNP with an inert shell were the brightest, but their RET efficiency was the lowest (17%). Nanoparticles with Tm3+ only in the shell have revealed the highest RET efficiencies (up to 51%) despite the compromised luminescence due to surface quenching. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 961 KW - resonance energy transfer KW - DBD dye KW - core shell UCNP KW - time-resolved luminescence Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-472240 SN - 1866-8372 IS - 961 ER -