TY - THES A1 - Ellenbeck, Saskia T1 - Zwischen Modellierung und Stakeholderbeteiligung - Wissensproduktion in der Energiewendeforschung N2 - Die Dekarbonisierung des Energiesystems ist Teil der international im Rahmen des Pariser Klimaabkommens beschlossenen CO2-Minderungsstrategie zur Bekämpfung des Klimawandels. Nach den Verhandlungen und Beschlüssen der Klimaziele stehen politische Entscheider weltweit nun vor der Frage, wie sie diese erreichen können. Dies produziert eine hohe politische Nachfrage nach Wissen um die direkten und indirekten Effekte verschiedener Instrumente und potentiellen Entwicklungspfade einer Energiewende. Dieser gesellschaftliche Bedarf an wissenschaftlichen Antworten zu Lösungsoptionen wurde im Rahmen einer Klimafolgenforschung, genauer einer Klimapolitikfolgenforschung, aufgenommen. Der relativ neue Zweig einer Energiewendeforschung hat sich weltweit entwickelt, steht dabei allerdings vor der doppelten Herausforderung: Erstens befindet sich das Objekt der Forschung nicht im luftleeren Raum, sondern innerhalb ökonomischer, sozialer und politischer Zusammenhänge, hier gesellschaftliche Einbettung genannt. Denn die Frage, wie die Energiewende erreicht werden kann, wird auch außerhalb der Wissenschaft debattiert und stellt damit ein Aushandlungsfeld unterschiedlicher Interessen und Narrative dar. Zweitens befindet sich das zu untersuchende Objekt in der Zukunft, hier unter dem Terminus des strukturellen Nicht-Wissens zusammengefasst. Diese beiden Bedingungen führen dazu, dass konventionelle Methoden der empirischen Sozialforschung nicht greifen und eine Öffnung und Transformation der Wissenschaft in Hinblick auf neue Methoden vonnöten ist (Nowotny 2001, Ravetz 2006, Schneidewind 2013). In dieser Arbeit untersuche ich zwei Möglichkeiten, wie mit der Herausforderung, Wissen unter der Bedingung des strukturellen Nicht-Wissens und der gesellschaftlichen Einbettung zu produzieren, in der Energiewendeforschung umgegangen wird. Einerseits wird dies durch die Einbeziehung von Stakeholdern, also nicht-wissenschaftlicher Akteure, in den Forschungsprozess getan. Andererseits ist die Nutzung von komplexen ökonometrischen Modellen zur Berechnung von Implikationen und energiewirtschaftlichen Entwicklungspfaden zu einem zentralen Mittel der Wissensgenerierung in der Energiewendeforschung avanciert. Damit wird der als Problem verstandenen strukturellen Bedingung des Nicht-Wissens insofern begegnet, als dass die Ergebnisse von Stakeholder-Involvement und von Modellierungsarbeiten zweifelsohne neues Wissen zur Verfügung stellen. Uneinigkeit besteht jedoch darin, worüber dieses Wissen etwas aussagt: Sind es Interessen oder legitime Perspektiven, die Stakeholder in den Forschungsprozess einbringen und sind Modelle vereinfachte Darstellungen der Welt oder sind sie Ausdruck der Vorstellung des Modellierers? KW - Wissenssoziologie KW - Modellierung KW - Energiesysteme KW - Stakeholder Y1 - 2023 ER - TY - THES A1 - Kooten, Willemijn Sarah Maria Theresia van T1 - Structural inheritance of the Salta Rift basin and its control on exhumation patterns of the Eastern Cordillera between 23 and 24°S T1 - Strukturelle Vererbung des Salta Riftbeckens und deren Einfluss auf die Heraushebungsmuster der Östlichen Kordillere zwischen 23 und 24°S N2 - The deformation style of mountain belts is greatly influenced by the upper plate architecture created during preceding deformation phases. The Mesozoic Salta Rift extensional phase has created a dominant structural and lithological framework that controls Cenozoic deformation and exhumation patterns in the Central Andes. Studying the nature of these pre-existing anisotropies is a key to understanding the spatiotemporal distribution of exhumation and its controlling factors. The Eastern Cordillera in particular, has a structural grain that is in part controlled by Salta Rift structures and their orientation relative to Andean shortening. As a result, there are areas in which Andean deformation prevails and areas where the influence of the Salta Rift is the main control on deformation patterns. Between 23 and 24°S, lithological and structural heterogeneities imposed by the Lomas de Olmedo sub-basin (Salta Rift basin) affect the development of the Eastern Cordillera fold-and-thrust belt. The inverted northern margin of the sub-basin now forms the southern boundary of the intermontane Cianzo basin. The former western margin of the sub-basin is located at the confluence of the Subandean Zone, the Santa Barbara System and the Eastern Cordillera. Here, the Salta Rift basin architecture is responsible for the distribution of these morphotectonic provinces. In this study we use a multi-method approach consisting of low-temperature (U-Th-Sm)/He and apatite fission track thermochronology, detrital geochronology, structural and sedimentological analyses to investigate the Mesozoic structural inheritance of the Lomas de Olmedo sub-basin and Cenozoic exhumation patterns. Characterization of the extension-related Tacurú Group as an intermediate succession between Paleozoic basement and the syn-rift infill of the Lomas de Olmedo sub-basin reveals a Jurassic maximum depositional age. Zircon (U-Th-Sm)/He cooling ages record a pre-Cretaceous onset of exhumation for the rift shoulders in the northern part of the sub-basin, whereas the western shoulder shows a more recent onset (140–115 Ma). Variations in the sedimentary thickness of syn- and post-rift strata document the evolution of accommodation space in the sub-basin. While the thickness of syn-rift strata increases rapidly toward the northern basin margin, the post-rift strata thickness decreases toward the margin and forms a condensed section on the rift shoulder. Inversion of Salta Rift structures commenced between the late Oligocene and Miocene (24–15 Ma) in the ranges surrounding the Cianzo basin. The eastern and western limbs of the Cianzo syncline, located in the hanging wall of the basin-bounding Hornocal fault, show diachronous exhumation. At the same time, western fault blocks of Tilcara Range, south of the Cianzo basin, began exhuming in the late Oligocene to early Miocene (26–16 Ma). Eastward propagation to the frontal thrust and to the Paleozoic strata east of the Tilcara Range occurred in the middle Miocene (22–10 Ma) and the late Miocene–early Pliocene (10–4 Ma), respectively. N2 - Der Deformationsstil von Gebirgsgürteln wird stark von der Architektur der oberen Platte beeinflusst, die während vorheriger Verformungsphasen entstanden ist. Die mesozoische Salta Rift Extensionsphase hat einen strukturellen und lithologischen Rahmen geschaffen, der die känozoischen Heraushebungsmuster in den Zentralanden kontrolliert. Die Charakterisierung dieser Anisotropien ist daher entscheidend, um die räumlich-zeitliche Verteilung der Heraushebung und ihrer kontrollierenden Faktoren zu verstehen. Insbesondere die Östliche Kordillere weist einen strukturellen Rahmen auf, der teilweise von Salta Rift-Strukturen und ihrer Orientierung in Bezug auf die Verkürzung im Zuge der Gebirgsbildung der Anden kontrolliert wird. Dadurch wurden Gebiete geschaffen, in denen die jüngere Anden-Deformation überwiegt, und Gebiete, in denen der Einfluss des Salta Rifts die Deformationsmuster prägt. Zwischen 23 und 24°S beeinflussen lithologische und strukturelle Heterogenitäten des Lomas de Olmedo Beckens (Teil des Salta Rift Beckens) die Entwicklung des Faltengürtels der Östlichen Kordillere. Der invertierte nördliche Rand des Beckens bildet dabei die südliche Grenze des Cianzo Beckens, welches während der andinen Orogenese angelegt wurde. Der ehemalige westliche Rand des Lomas de Olmedo Beckens befindet sich am Übergang der Subandinen Zone, des Santa Barbara Systems und der Östlichen Kordillere. Hier ist die Architektur des Salta Rift-Beckens für die räumliche Verteilung dieser morphotektonischen Provinzen verantwortlich. In dieser Studie verwenden wir einen multi-methodischen Ansatz, bestehend aus Niedertemperatur (U-Th-Sm)/He und Apatit Spaltspur Thermochronologie, detritische Geochronologie sowie strukturelle und sedimentologische Analyse, um das mesozoische strukturelle Erbe des Lomas de Olmedo Beckens und die känozoischen Heraushebungsmuster zu untersuchen. Die mit Extension verbundene Tacurú-Gruppe bildet eine Einheit, die dem paläozoischen Grundgebirge und der syn-rift Auffüllung des Lomas de Olmedo Beckens zwischengeschaltet ist. Sie hat ein Jurassisches maximales Ablagerungsalter. Zirkon (U-Th-Sm)/He Abkühlungsalter zeigen einen präkretazischen Beginn der Heraushebung für die Riftschulter im nördlichen Teil des Beckens, während die westliche Schulter einen jüngeren Beginn aufweist (140–115 Ma). Variationen in der stratigraphischen Mächtigkeit von Syn- und Postrift-Gesteinen dokumentieren die Entwicklung des Akommodationsraums. Während die Mächtigkeit der Synrift-Gesteine zum nördlichen Beckenrand hin zunimmt, schwindet die Mächtigkeit der Postrift-Gesteine in Richtung des Beckenrandes und bildet dort eine kondensierte Abfolge. Die Inversion der Salta Rift Strukturen begann im Cianzo Becken zwischen dem späten Oligozän und Miozän (24–15 Ma) mit einer diachronen Heraushebung des östlichen und westlichen Schenkels der Cianzo Synklinale, welche sich im Hangenden der Hornocal Störung befindet. Gleichzeitig begann im Tilcara Gebirge, südlich des Cianzo Beckens, im späten Oligozän bis frühen Miozän (26–16 Ma) die Heraushebung westlicher Störungsblöcke. Die ostwärtige Ausbreitung zur frontalen Überschiebung erfolgte im mittleren Miozän (22–10 Ma) und zum San Lucas Block im späten Miozän bis frühen Pliozän (10–4 Ma). KW - Argentina KW - Argentinien KW - thermochronology KW - Thermochronologie KW - exhumation KW - structural inheritance KW - thermal modeling KW - Eastern Cordillera KW - östliche Kordillere KW - Modellierung KW - Salta Rift KW - Salta Rift Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-617983 ER - TY - THES A1 - Malem-Shinitski, Noa T1 - Bayesian inference and modeling for point processes with applications from neuronal activity to scene viewing T1 - Bayessche Inferenz und Modellierung für Punktprozesse mit Anwendungen von neuronaler Aktivität bis Szenenbetrachtung N2 - Point processes are a common methodology to model sets of events. From earthquakes to social media posts, from the arrival times of neuronal spikes to the timing of crimes, from stock prices to disease spreading -- these phenomena can be reduced to the occurrences of events concentrated in points. Often, these events happen one after the other defining a time--series. Models of point processes can be used to deepen our understanding of such events and for classification and prediction. Such models include an underlying random process that generates the events. This work uses Bayesian methodology to infer the underlying generative process from observed data. Our contribution is twofold -- we develop new models and new inference methods for these processes. We propose a model that extends the family of point processes where the occurrence of an event depends on the previous events. This family is known as Hawkes processes. Whereas in most existing models of such processes, past events are assumed to have only an excitatory effect on future events, we focus on the newly developed nonlinear Hawkes process, where past events could have excitatory and inhibitory effects. After defining the model, we present its inference method and apply it to data from different fields, among others, to neuronal activity. The second model described in the thesis concerns a specific instance of point processes --- the decision process underlying human gaze control. This process results in a series of fixated locations in an image. We developed a new model to describe this process, motivated by the known Exploration--Exploitation dilemma. Alongside the model, we present a Bayesian inference algorithm to infer the model parameters. Remaining in the realm of human scene viewing, we identify the lack of best practices for Bayesian inference in this field. We survey four popular algorithms and compare their performances for parameter inference in two scan path models. The novel models and inference algorithms presented in this dissertation enrich the understanding of point process data and allow us to uncover meaningful insights. N2 - Punktprozesse sind eine gängige Methode zur Modellierung von Ereignismengen. Von Erdbeben bis zu Social-Media-Posts, von den neuronalen Spikes bis zum Zeitpunkt von Verbrechen, von Aktienkursen bis zur Ausbreitung von Krankheiten - diese Phänomene lassen sich auf das Auftreten von Ereignissen reduzieren, die in Punkten konzentriert sind. Häufig treten diese Ereignisse nacheinander auf und bilden eine Zeitreihe. Modelle von Punktprozessen können verwendet werden, um unser Verständnis solcher Ereignisse für Klassifizierung und Vorhersage zu vertiefen. Solche Modelle umfassen einen zugrunde liegenden Zufallsprozess, der die Ereignisse erzeugt. In dieser Arbeit wird die Bayes'sche Methodik verwendet, um den zugrunde liegenden generativen Prozess aus den beobachteten Daten abzuleiten. Wir leisten einen doppelten Beitrag: Wir entwickeln neue Modelle und neue Inferenzmethoden für diese Prozesse. Wir schlagen ein Modell vor, das die Familie der Punktprozesse erweitert, bei denen das Auftreten eines Ereignisses von den vorherigen Ereignissen abhängt. Diese Familie ist als Hawkes-Prozesse bekannt. Während in den meisten bestehenden Modellen solcher Prozesse davon ausgegangen wird, dass vergangene Ereignisse nur eine exzitatorische Wirkung auf zukünftige Ereignisse haben, konzentrieren wir uns auf den neu entwickelten nichtlinearen Hawkes-Prozess, bei dem vergangene Ereignisse exzitatorische und hemmende Wirkungen haben können. Nach der Definition des Modells stellen wir seine Inferenzmethode vor und wenden sie auf Daten aus verschiedenen Bereichen an, unter anderem auf die neuronale Aktivität. Das zweite Modell, das in dieser Arbeit beschrieben wird, betrifft einen speziellen Fall von Punktprozessen - den Entscheidungsprozess, der der menschlichen Blicksteuerung zugrunde liegt. Dieser Prozess führt zu einer Reihe von fixierten Positionen in einem Bild. Wir haben ein neues Modell entwickelt, um diesen Prozess zu beschreiben, motiviert durch das bekannte Exploration-Exploitation-Dilemma. Neben dem Modell stellen wir einen Bayes'schen Inferenzalgorithmus vor, um die Modellparameter abzuleiten. Wir bleiben auf dem Gebiet der menschlichen Szenenbetrachtung und stellen fest, dass es in diesem Bereich keine bewährten Verfahren für die Bayes'sche Inferenz gibt. Wir geben einen Überblick über vier gängige Algorithmen und vergleichen ihre Leistungen bei der Ableitung von Parametern für zwei Scanpfadmodelle. Die in dieser Dissertation vorgestellten neuen Modelle und Inferenzalgorithmen bereichern das Verständnis von Punktprozessdaten und ermöglichen es uns, sinnvolle Erkenntnisse zu gewinnen. KW - Bayesian inference KW - point process KW - statistical machine learning KW - sampling KW - modeling KW - Bayessche Inferenz KW - Modellierung KW - Punktprozess KW - Stichprobenentnahme aus einem statistischen Modell KW - statistisches maschinelles Lernen Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-614952 ER - TY - THES A1 - Stoltnow, Malte T1 - Magmatic-hydrothermal processes along the porphyry to epithermal transition T1 - Magmatisch-hydrothermale Prozesse entlang des porphyrisch-epithermalen Übergangs N2 - Magmatic-hydrothermal systems form a variety of ore deposits at different proximities to upper-crustal hydrous magma chambers, ranging from greisenization in the roof zone of the intrusion, porphyry mineralization at intermediate depths to epithermal vein deposits near the surface. The physical transport processes and chemical precipitation mechanisms vary between deposit types and are often still debated. The majority of magmatic-hydrothermal ore deposits are located along the Pacific Ring of Fire, whose eastern part is characterized by the Mesozoic to Cenozoic orogenic belts of the western North and South Americas, namely the American Cordillera. Major magmatic-hydrothermal ore deposits along the American Cordillera include (i) porphyry Cu(-Mo-Au) deposits (along the western cordilleras of Mexico, the western U.S., Canada, Chile, Peru, and Argentina); (ii) Climax- (and sub−) type Mo deposits (Colorado Mineral Belt and northern New Mexico); and (iii) porphyry and IS-type epithermal Sn(-W-Ag) deposits of the Central Andean Tin Belt (Bolivia, Peru and northern Argentina). The individual studies presented in this thesis primarily focus on the formation of different styles of mineralization located at different proximities to the intrusion in magmatic-hydrothermal systems along the American Cordillera. This includes (i) two individual geochemical studies on the Sweet Home Mine in the Colorado Mineral Belt (potential endmember of peripheral Climax-type mineralization); (ii) one numerical modeling study setup in a generic porphyry Cu-environment; and (iii) a numerical modeling study on the Central Andean Tin Belt-type Pirquitas Mine in NW Argentina. Microthermometric data of fluid inclusions trapped in greisen quartz and fluorite from the Sweet Home Mine (Detroit City Portal) suggest that the early-stage mineralization precipitated from low- to medium-salinity (1.5-11.5 wt.% equiv. NaCl), CO2-bearing fluids at temperatures between 360 and 415°C and at depths of at least 3.5 km. Stable isotope and noble gas isotope data indicate that greisen formation and base metal mineralization at the Sweet Home Mine was related to fluids of different origins. Early magmatic fluids were the principal source for mantle-derived volatiles (CO2, H2S/SO2, noble gases), which subsequently mixed with significant amounts of heated meteoric water. Mixing of magmatic fluids with meteoric water is constrained by δ2Hw-δ18Ow relationships of fluid inclusions. The deep hydrothermal mineralization at the Sweet Home Mine shows features similar to deep hydrothermal vein mineralization at Climax-type Mo deposits or on their periphery. This suggests that fluid migration and the deposition of ore and gangue minerals in the Sweet Home Mine was triggered by a deep-seated magmatic intrusion. The second study on the Sweet Home Mine presents Re-Os molybdenite ages of 65.86±0.30 Ma from a Mo-mineralized major normal fault, namely the Contact Structure, and multimineral Rb-Sr isochron ages of 26.26±0.38 Ma and 25.3±3.0 Ma from gangue minerals in greisen assemblages. The age data imply that mineralization at the Sweet Home Mine formed in two separate events: Late Cretaceous (Laramide-related) and Oligocene (Rio Grande Rift-related). Thus, the age of Mo mineralization at the Sweet Home Mine clearly predates that of the Oligocene Climax-type deposits elsewhere in the Colorado Mineral Belt. The Re-Os and Rb-Sr ages also constrain the age of the latest deformation along the Contact Structure to between 62.77±0.50 Ma and 26.26±0.38 Ma, which was employed and/or crosscut by Late Cretaceous and Oligocene fluids. Along the Contact Structure Late Cretaceous molybdenite is spatially associated with Oligocene minerals in the same vein system, a feature that precludes molybdenite recrystallization or reprecipitation by Oligocene ore fluids. Ore precipitation in porphyry copper systems is generally characterized by metal zoning (Cu-Mo to Zn-Pb-Ag), which is suggested to be variably related to solubility decreases during fluid cooling, fluid-rock interactions, partitioning during fluid phase separation and mixing with external fluids. The numerical modeling study setup in a generic porphyry Cu-environment presents new advances of a numerical process model by considering published constraints on the temperature- and salinity-dependent solubility of Cu, Pb and Zn in the ore fluid. This study investigates the roles of vapor-brine separation, halite saturation, initial metal contents, fluid mixing, and remobilization as first-order controls of the physical hydrology on ore formation. The results show that the magmatic vapor and brine phases ascend with different residence times but as miscible fluid mixtures, with salinity increases generating metal-undersaturated bulk fluids. The release rates of magmatic fluids affect the location of the thermohaline fronts, leading to contrasting mechanisms for ore precipitation: higher rates result in halite saturation without significant metal zoning, lower rates produce zoned ore shells due to mixing with meteoric water. Varying metal contents can affect the order of the final metal precipitation sequence. Redissolution of precipitated metals results in zoned ore shell patterns in more peripheral locations and also decouples halite saturation from ore precipitation. The epithermal Pirquitas Sn-Ag-Pb-Zn mine in NW Argentina is hosted in a domain of metamorphosed sediments without geological evidence for volcanic activity within a distance of about 10 km from the deposit. However, recent geochemical studies of ore-stage fluid inclusions indicate a significant contribution of magmatic volatiles. This study tested different formation models by applying an existing numerical process model for porphyry-epithermal systems with a magmatic intrusion located either at a distance of about 10 km underneath the nearest active volcano or hidden underneath the deposit. The results show that the migration of the ore fluid over a 10-km distance results in metal precipitation by cooling before the deposit site is reached. In contrast, simulations with a hidden magmatic intrusion beneath the Pirquitas deposit are in line with field observations, which include mineralized hydrothermal breccias in the deposit area. N2 - Magmatisch-hydrothermale Systeme bilden eine Vielzahl von Erzlagerstätten in unterschiedlicher Entfernung zu wasserhaltigen Magmakammern in der oberen Erdkruste, von der Greisenbildung in der Dachzone der Intrusion über die Porphyrmineralisierung in mittleren Tiefen bis hin zu epithermalen Ganglagerstätten nahe der Erdoberfläche. Die physikalischen Transportprozesse und chemischen Ausfällungsmechanismen variieren zwischen den verschiedenen Lagerstättentypen und werden immer noch häufig diskutiert. Die meisten magmatisch-hydrothermalen Erzlagerstätten befinden sich entlang des Pazifischen Feuerrings, dessen östlicher Teil durch die mesozoischen bis känozoischen orogenen Gürtel des westlichen Nord- und Südamerikas, zusammen die Amerikanische Kordillere, vertreten ist. Zu den wichtigsten magmatisch-hydrothermalen Erzlagerstätten entlang der Amerikanischen Kordillere gehören (i) Cu(-Mo-Au)-Porphyrlagerstätten (entlang der westlichen Kordilleren Mexikos, der westlichen USA, Kanadas, Chiles, Perus und Argentiniens); (ii) Mo-Lagerstätten vom Climax- (und Sub-)Typ (Colorado Mineral Belt und nördliches New Mexico); und (iii) porphyrische und epithermale Sn(-W-Ag)-Lagerstätten vom IS-Typ des Zentralandinen-Zinngürtels (Bolivien, Peru und Nordargentinien). Die einzelnen Studien dieser Arbeit konzentrieren sich in erster Linie auf die Bildung verschiedener Vererzungsstypen, die sich in unterschiedlicher Entfernung zur Intrusion in magmatisch-hydrothermalen Systemen entlang der amerikanischen Kordillere befinden. Dazu gehören (i) zwei geochemische Einzelstudien über die Sweet Home-Mine im Colorado Mineral Belt (potenzielles Endglied der peripheren Mineralisierung des Climax-Typs); (ii) eine numerische Modellierungsstudie in einem generischen Cu-Porphyr-Setup; und (iii) eine numerische Modellierungsstudie über die Pirquitas-Mine des Zentralandinen-Zinn-Typs in Nordwest-Argentinien. Mikrothermometrische Daten von Fluideinschlüssen, die in Greisenquarz und -fluorit aus der Sweet Home-Mine (Detroit City Portal) eingeschlossen sind, deuten darauf hin, dass die Mineralisierung im Frühstadium aus CO2-haltigen Fluiden mit niedrigem bis mittlerem Salzgehalt (1,5-11,5 Gew.-% NaCl-Äquivalent) bei Temperaturen zwischen 360 und 415 °C und in einer Tiefe von mindestens 3,5 km ausgefällt wurde. Daten zu stabilen Isotopen und Edelgasisotopen zeigen, dass die Greisenbildung und die Buntmetallvererzung in der Sweet Home-Mine mit Fluiden unterschiedlichen Ursprungs in Verbindung stehen. Frühe magmatische Fluide waren die Hauptquelle für aus dem Mantel stammende Volatile (CO2, H2S/SO2, Edelgase), die sich anschließend mit erheblichen Mengen erhitzten meteorischen Wassers vermischten. Die Vermischung von magmatischen Fluiden mit meteorischem Wasser wird durch die Zusammenhänge von δ2Hw-δ18Ow der Fluideinschlüsse belegt. Die tiefe hydrothermale Vererzung in der Sweet Home-Mine weist ähnliche Merkmale auf wie die tiefe hydrothermale Gangvererzung in Mo-Lagerstätten vom Climax-Typ oder in deren Peripherie. Dies deutet darauf hin, dass die Fluidmigration und die Ausfällung von Erz und Gangmineralen in der Sweet Home-Mine durch eine tief sitzende magmatische Intrusion angeregt wurde. Die zweite Studie über die Sweet Home Mine präsentiert ein Re-Os-Molybdänit-Alter von 65,86±0,30 Ma aus einer Mo-vererzten Abschiebung, namentlich der Contact Structure, und ein multimineralisches Rb-Sr-Isochronen-Alter von 26,26±0,38 Ma und 25,3±3,0 Ma von Gangmineralen in Greisenvergesellschaftungen. Die Altersdaten deuten darauf hin, dass die Vererzungen in der Sweet Home Mine während zweier separater Ereignisse entstand: In der späten Kreidezeit (im Zusammenhang mit der Laramidischen Orogenese) und im Oligozän (im Zusammenhang mit dem Rio Grande Rift). Das Alter der Mo-Vererzung in der Sweet Home Mine liegt demnach eindeutig vor dem der oligozänen Climax-Lagerstätten anderswo im Colorado Mineral Belt. Die Re-Os- und Rb-Sr-Alter grenzen auch das Alter der jüngsten Deformation entlang der Contact Structure, die von spätkreidezeitlichen und oligozänen Fluiden genutzt und/oder geschnitten wurde, auf 62,77±0,50 Ma und 26,26±0,38 Ma ein. Entlang der Contact Structure ist spätkreidezeitlicher Molybdänit räumlich mit Mineralen aus dem Oligozän in demselben Gangsystem vergesellschaftet, was eine Rekristallisierung oder Ausfällung von Molybdänit durch oligozäne Fluide ausschließt. Die Erzausfällung in porphyrischen Kupfersystemen ist im Allgemeinen durch eine Metallzonierung (Cu-Mo bis Zn-Pb-Ag) gekennzeichnet, die vermutlich mit der Abnahme der Löslichkeit während der Fluidabkühlung, den Wechselwirkungen zwischen Fluid und Gestein, der Partitionierung während der Phasenseparation des Fluids und der Mischung mit externen Fluiden in Zusammenhang steht. Die numerische Modellierung, die in einer generischen Porphyr-Cu-Umgebung durchgeführt wurde, stellt neue Fortschritte eines numerischen Prozessmodells dar, indem sie veröffentlichte Randbedingungen für die temperatur- und salinitätsabhängige Löslichkeit von Cu, Pb und Zn im Erzfluid berücksichtigt. Diese Studie untersucht die Rolle der Dampf-Sole-Separation, der Halitsättigung, des anfänglichen Metallgehalts, der Fluidmischung und der Remobilisierung als Einflussfaktoren erster Ordnung der physikalischen Hydrologie auf die Erzbildung. Die Ergebnisse zeigen, dass die magmatischen Dampf- und Solephasen mit unterschiedlichen Verweilzeiten, aber als mischbare Fluide aufsteigen, wobei eine Erhöhung des Salzgehalts zu einem metall-ungesättigten Gesamtfluid führt. Die Freisetzungsraten der magmatischen Fluide wirken sich auf die Lage der thermohalinen Fronten aus, was zu widersprüchlichen Mechanismen für die Erzausfällung führt: Höhere Raten führen zu einer Halitsättigung ohne signifikante Metallzonierung, niedrigere Raten erzeugen zonierte Erzschalen aufgrund der Mischung mit meteorischem Wasser. Unterschiedliche Metallgehalte können sich auf die Reihenfolge der endgültigen Metallausfällung auswirken. Die Wiederauflösung bereits ausgefällter Metalle führt zu zonierten Erzschalenmustern in periphereren Bereichen und entkoppelt auch die Halitsättigung von der Erzausfällung. Die epithermale Pirquitas Sn-Ag-Pb-Zn-Mine im Nordwesten Argentiniens befindet sich in einem Bereich metamorphisierter Sedimente ohne geologische Hinweise auf vulkanische Aktivitäten in einer Entfernung von etwa 10 km zur Lagerstätte. Jüngste geochemische Untersuchungen von Fluideinschlüssen im Erzstadium deuten jedoch auf einen bedeutenden Beitrag von magmatischen Volatilen hin. In dieser Studie wurden verschiedene Entstehungsmodelle getestet, indem ein bestehendes numerisches Prozessmodell für porphyrisch-epithermale Systeme mit einer magmatischen Intrusion angewandt wurde, die sich entweder in einer Entfernung von etwa 10 km unterhalb des nächstgelegenen aktiven Vulkans oder verborgen unterhalb der Lagerstätte befindet. Die Ergebnisse zeigen, dass die Migration der Erzflüssigkeit über eine Entfernung von 10 km zu einer Metallausfällung durch Abkühlung führt, bevor die Lagerstätte erreicht wird. Im Gegensatz dazu stimmen die Simulationen mit einer verborgenen magmatischen Intrusion unter der Pirquitas-Lagerstätte mit den Feldbeobachtungen überein, die mineralisierte hydrothermale Brekzien im Lagerstättenbereich umfassen. KW - magmatic KW - hydrothermal KW - ore KW - deposits KW - copper KW - lead KW - zinc KW - molybdenum KW - numerical KW - modeling KW - Sweet KW - Home KW - Pirquitas KW - Colorado KW - Argentina KW - Argentinien KW - Colorado KW - Home KW - Pirquitas KW - Sweet KW - Kupfer KW - Lagerstätte KW - hydrothermal KW - Blei KW - magmatisch KW - Modellierung KW - Molybdän KW - numerisch KW - Erz KW - Zink Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-611402 ER - TY - THES A1 - Bäckemo, Johan Dag Valentin T1 - Digital tools and bioinspiration for the implementation in science and medicine T1 - Digitale Werkzeuge und Bioinspiration für die Umsetzung in der Wissenschaft und der Medizin N2 - Diese Doktorarbeit untersucht anhand dreier Beispiele, wie digitale Werkzeuge wie Programmierung, Modellierung, 3D-Konstruktions-Werkzeuge und additive Fertigung in Verbindung mit einer auf Biomimetik basierenden Design\-strategie zu neuen Analysemethoden und Produkten führen können, die in Wissenschaft und Medizin Anwendung finden. Das Verfahren der Funkenerosion (EDM) wird häufig angewandt, um harte Metalle zu verformen oder zu formen, die mit normalen Maschinen nur schwer zu bearbeiten sind. In dieser Arbeit wird eine neuartige Krümmungsanalysemethode als Alternative zur Rauheitsanalyse vorgestellt. Um besser zu verstehen, wie sich die Oberfläche während der Bearbeitungszeit des EDM-Prozesses verändert, wurde außerdem ein digitales Schlagmodell erstellt, das auf einem ursprünglich flachen Substrat Krater auf Erhebungen erzeugte. Es wurde festgestellt, dass ein Substrat bei etwa 10.000 Stößen ein Gleichgewicht erreicht. Die vorgeschlagene Krümmungsanalysemethode hat das Potenzial, bei der Entwicklung neuer Zellkultursubstrate für die Stammzellenforschung eingesetzt zu werden. Zwei Arten, die in dieser Arbeit aufgrund ihrer interessanten Mechanismen analysiert wurden, sind die Venusfliegenfalle und der Bandwurm. Die Venusfliegenfalle kann ihr Maul mit einer erstaunlichen Geschwindigkeit schließen. Der Schließmechanismus kann für die Wissenschaft interessant sein und ist ein Beispiel für ein so genanntes mechanisch bi-stabiles System - es gibt zwei stabile Zustände. Der Bandwurm ist bei Säugetieren meist im unteren Darm zu finden und heftet sich mit seinen Saugnäpfen an die Darmwände. Wenn der Bandwurm eine geeignete Stelle gefunden hat, stößt er seine Haken aus und heftet sich dauerhaft an die Wand. Diese Funktion könnte in der minimalinvasiven Medizin genutzt werden, um eine bessere Kontrolle der Implantate während des Implantationsprozesses zu ermöglichen. Für beide Projekte wurde ein mathematisches Modell, das so genannte Chained Beam Constraint Model (CBCM), verwendet, um das nichtlineare Biegeverhalten zu modellieren und somit vorherzusagen, welche Strukturen ein mechanisch bi-stabiles Verhalten aufweisen könnten. Daraufhin konnten zwei Prototypen mit einem 3D-Drucker gedruckt und durch Experimente veranschaulicht werden, dass sie beide ein bi-stabiles Verhalten aufweisen. Diese Arbeit verdeutlicht das hohe Anwendungspotenzial für neue Analysenmethoden in der Wissenschaft und für neue Medizinprodukte in der minimalinvasiven Medizin. N2 - Biomimicry is the art of mimicking nature to overcome a particular technical or scientific challenge. The approach studies how evolution has found solutions to the most complex problems in nature. This makes it a powerful method for science. In combination with the rapid development of manufacturing and information technologies into the digital age, structures and material that were before thought to be unrealizable can now be created with simple sketch and the touch of a button. This doctoral thesis had as its primary goal to investigate how digital tools, such as programming, modelling, 3D-Design tools and 3D-Printing, with the help from biomimicry, could lead to new analysis methods in science and new medical devices in medicine. The Electrical Discharge Machining (EDM) process is applied commonly to deform or mold hard metals that are difficult to work using normal machinery. A workpiece submerged in an electrolyte is deformed while being in close vicinity to an electrode. When high voltage is put between the workpiece and the electrode it will cause sparks that create cavitations on the substrate which in turn removes material and is flushed away by the electrolyte. Usually, such surfaces are analysed based on roughness, in this work another method using a novel curvature analysis method is presented as an alternative. In addition, to better understand how the surface changes during process time of the EDM process, a digital impact model was created which created craters on ridges on an originally flat substrate. These substrates were then analysed using the curvature analysis method at different processing times of the modelling. It was found that a substrate reaches an equilibrium at around 10000 impacts. The proposed curvature analysis method has potential to be used in the design of new cell culture substrates for stem cell. The Venus flytrap can shut its jaws at an amazing speed. The shutting mechanism may be interesting to use in science and is an example of a so-called mechanical bi-stable system – there are two stable states. In this work two truncated pyramid structures were modelled using a non-linear mechanical model called the Chained Beam Constraint Model (CBCM). The structure with a slope angle of 30 degrees is not bi-stable and the structure with a slope angle of 45 degrees is bi-stable. Developing this idea further by using PEVA, which has a shape-memory effect, the structure which is not bi-stable could be programmed to be bi-stable and then turned off again. This could be used as an energy storage system. Another species which has interesting mechanism is the tapeworm. Some species of this animal has a crown of hooks and suckers located on its side. The parasite commonly is found in mammals in the lower intestine and attaches to the walls by using its suckers. When the tapeworm has found a suitable spot, it ejects its hooks and permanently attaches to the wall. This function could be used in minimally invasive medicine to have better control of implants during the implantation process. By using the CBCM model and a 3D-printer capable of tuning how hard or soft a printed part is, a design strategy was developed to investigate how one could create a device that mimics the tapeworm. In the end a prototype was created which was able attach to a pork loin at an under pressure of 20 kPa and to ejects its hooks at an under pressure of 50 kPa or above. These three projects is an exhibit of how digital tools and biomimicry can be used together to come up with applicable solutions in science and in medicine. KW - bioinspiration KW - non-linear mechanics KW - modelling KW - shape-memory KW - additive manufacturing KW - Bioinspiration KW - nichtlineare Mechanik KW - Modellierung KW - Formgedächtnis KW - additive Fertigung Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-571458 ER - TY - THES A1 - Kath, Nadja Jeanette T1 - Functional traits determine biomass dynamics, coexistence and energetics in plankton food webs N2 - Plankton food webs are the basis of marine and limnetic ecosystems. Especially aquatic ecosystems of high biodiversity provide important ecosystem services for humankind as providers of food, coastal protection, climate regulation, and tourism. Understanding the dynamics of biomass and coexistence in these food webs is a first step to understanding the ecosystems. It also lays the foundation for the development of management strategies for the maintenance of the marine and freshwater biodiversity despite anthropogenic influences. Natural food webs are highly complex, and thus often equally complex methods are needed to analyse and understand them well. Models can help to do so as they depict simplified parts of reality. In the attempt to get a broader understanding of the complex food webs, diverse methods are used to investigate different questions. In my first project, we compared the energetics of a food chain in two versions of an allometric trophic network model. In particular, we solved the problem of unrealistically high trophic transfer efficiencies (up to 70%) by accounting for both basal respiration and activity respiration, which decreased the trophic transfer efficiency to realistic values of ≤30%. Next in my second project I turned to plankton food webs and especially phytoplankton traits. Investigating a long-term data set from Lake Constance we found evidence for a trade-off between defence and growth rate in this natural phytoplankton community. I continued working with this data set in my third project focusing on ciliates, the main grazer of phytoplankton in spring. Boosted regression trees revealed that temperature and predators have the highest influence on net growth rates of ciliates. We finally investigated in my fourth project a food web model inspired by ciliates to explore the coexistence of plastic competitors and to study the new concept of maladaptive switching, which revealed some drawbacks of plasticity: faster adaptation led to higher maladaptive switching towards undefended phenotypes which reduced autotroph biomass and coexistence and increased consumer biomass. It became obvious that even well-established models should be critically questioned as it is important not to forget reality on the way to a simplistic model. The results showed furthermore that long-term data sets are necessary as they can help to disentangle complex natural processes. Last, one should keep in mind that the interplay between models and experiments/ field data can deliver fruitful insights about our complex world. N2 - Plankton-Nahrungsnetze sind die Grundlage mariner und limnischer Ökosysteme. Besonders die aquatischen Ökosysteme mit hoher Biodiversität erbringen wichtige Ökosystemdienstleistungen für uns Menschen wie beispielsweise die Bereitstellung von Nahrung, Küstenschutz, Klimaregulation sowie Tourismus. Die Dynamiken und die Koexistenz der Arten in diesen Ökosystemen zu verstehen, ist ein erster Schritt für die Entwicklung von Möglichkeiten zum Schutz ihrer Biodiversität. Aufgrund der hohen Komplexität natürlicher Nahrungsnetze braucht es oft ebenso komplexe Methoden um sie zu analysieren und zu verstehen. Modelle können dabei unterstützen, da sie Teile der Realität vereinfacht abbilden. In meiner Dissertation arbeitete ich mit verschiedenen Nahrungsnetzmodellen, um die Dynamiken in Nahrungsnetzen zu verstehen. In meinem ersten Projekt haben wir die Energieflüsse einer Nahrungskette in zwei Versionen eines allometrisch skalierten Nahrungsnetzmodells untersucht. Wenn nur die klassische basale Respiration einbezogen wird, steigt die trophische Transfereffizienz auf bis zu unrealistische 70 %. Durch die Einbeziehung der aktivitätsbezogenen Respiration sank die trophische Transfereffizienz auf realistische Werte von maximal 30 %. Danach wandte ich mich in meinem zweiten Projekt Plankton-Nahrungsnetzen und den Eigenschaften des Phytoplanktons zu. Bei der Untersuchung eines Langzeitdatensatzes von 21 Jahren aus dem Bodensee fanden wir einen Beweis für einen Trade-off zwischen Verteidigung und Wachstumsrate in einer natürlichen Phytoplankton-gemeinschaft. In diesem Datensatz konzentrierte ich mich anschließend in meinem dritten Projket auf Ciliaten, welche die wichtigsten Fraßfeinde von Phytoplankton im Frühjahr darstellen. Die Methode der boosted regression trees zeigte, dass Temperatur und Räuber den größten Einfluss auf die Nettowachstumsraten der Ciliaten haben. Schließlich nutzten wir in meinem vierten Projekt ein von Ciliaten inspiriertes Nahrungsnetzmodell, um die Koexistenz von Konkurrenten mit veränderlichen Eigenschaften und das neue Konzept des maladaptive switching zu untersuchen, welches Nachteile der Plastizität zeigt: höhere Wechselraten zwischen den Phänotypen führten zu höherem maladaptive switching in Richtung der unverteidigten Phänotypen, was die Biomasse und Koexistenz der Autotrophen reduziert und die Biomasse des Konsumenten erhöht. Es wurde offensichtlich, dass auch etablierte Modelle kritisch hinterfragt werden müssen, da es wichtig ist, die Realität auf dem Weg zu einem einfachen Modell nicht zu vergessen. Meine Ergebnisse zeigten des Weiteren, wie wichtig Langzeitdatensätze sind, da sie helfen können, komplexe natürliche Prozesse zu beleuchten. Dieses Wechselspiel zwischen Modellen und Daten aus Experimenten oder Felduntersuchungen kann fruchtbare Ergebnisse liefern und zu einem größeren Verständnis unserer komplexen Welt beitragen. KW - functional traits KW - plankton food web KW - coexistence KW - modelling KW - Modellierung KW - Planktonnahrungsnetz KW - Koexistenz Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-551239 ER - TY - THES A1 - Rodriguez Piceda, Constanza T1 - Thermomechanical state of the southern Central Andes T1 - Thermomechanischer Zustand der südlichen Zentral Anden BT - implications for active deformation patterns in the transition from flat to steep subduction BT - Implikationen für aktive Deformationsmuster beim Übergang von flacher zu steiler Subduktion N2 - The Andes are a ~7000 km long N-S trending mountain range developed along the South American western continental margin. Driven by the subduction of the oceanic Nazca plate beneath the continental South American plate, the formation of the northern and central parts of the orogen is a type case for a non-collisional orogeny. In the southern Central Andes (SCA, 29°S-39°S), the oceanic plate changes the subduction angle between 33°S and 35°S from almost horizontal (< 5° dip) in the north to a steeper angle (~30° dip) in the south. This sector of the Andes also displays remarkable along- and across- strike variations of the tectonic deformation patterns. These include a systematic decrease of topographic elevation, of crustal shortening and foreland and orogenic width, as well as an alternation of the foreland deformation style between thick-skinned and thin-skinned recorded along- and across the strike of the subduction zone. Moreover, the SCA are a very seismically active region. The continental plate is characterized by a relatively shallow seismicity (< 30 km depth) which is mainly focussed at the transition from the orogen to the lowland areas of the foreland and the forearc; in contrast, deeper seismicity occurs below the interiors of the northern foreland. Additionally, frequent seismicity is also recorded in the shallow parts of the oceanic plate and in a sector of the flat slab segment between 31°S and 33°S. The observed spatial heterogeneity in tectonic and seismic deformation in the SCA has been attributed to multiple causes, including variations in sediment thickness, the presence of inherited structures and changes in the subduction angle of the oceanic slab. However, there is no study that inquired the relationship between the long-term rheological configuration of the SCA and the spatial deformation patterns. Moreover, the effects of the density and thickness configuration of the continental plate and of variations in the slab dip angle in the rheological state of the lithosphere have been not thoroughly investigated yet. Since rheology depends on composition, pressure and temperature, a detailed characterization of the compositional, structural and thermal fields of the lithosphere is needed. Therefore, by using multiple geophysical approaches and data sources, I constructed the following 3D models of the SCA lithosphere: (i) a seismically-constrained structural and density model that was tested against the gravity field; (ii) a thermal model integrating the conversion of mantle shear-wave velocities to temperature with steady-state conductive calculations in the uppermost lithosphere (< 50 km depth), validated by temperature and heat-flow measurements; and (iii) a rheological model of the long-term lithospheric strength using as input the previously-generated models. The results of this dissertation indicate that the present-day thermal and rheological fields of the SCA are controlled by different mechanisms at different depths. At shallow depths (< 50 km), the thermomechanical field is modulated by the heterogeneous composition of the continental lithosphere. The overprint of the oceanic slab is detectable where the oceanic plate is shallow (< 85 km depth) and the radiogenic crust is thin, resulting in overall lower temperatures and higher strength compared to regions where the slab is steep and the radiogenic crust is thick. At depths > 50 km, largest temperatures variations occur where the descending slab is detected, which implies that the deep thermal field is mainly affected by the slab dip geometry. The outcomes of this thesis suggests that long-term thermomechanical state of the lithosphere influences the spatial distribution of seismic deformation. Most of the seismicity within the continental plate occurs above the modelled transition from brittle to ductile conditions. Additionally, there is a spatial correlation between the location of these events and the transition from the mechanically strong domains of the forearc and foreland to the weak domain of the orogen. In contrast, seismicity within the oceanic plate is also detected where long-term ductile conditions are expected. I therefore analysed the possible influence of additional mechanisms triggering these earthquakes, including the compaction of sediments in the subduction interface and dehydration reactions in the slab. To that aim, I carried out a qualitative analysis of the state of hydration in the mantle using the ratio between compressional- and shear-wave velocity (vp/vs ratio) from a previous seismic tomography. The results from this analysis indicate that the majority of the seismicity spatially correlates with hydrated areas of the slab and overlying continental mantle, with the exception of the cluster within the flat slab segment. In this region, earthquakes are likely triggered by flexural processes where the slab changes from a flat to a steep subduction angle. First-order variations in the observed tectonic patterns also seem to be influenced by the thermomechanical configuration of the lithosphere. The mechanically strong domains of the forearc and foreland, due to their resistance to deformation, display smaller amounts of shortening than the relatively weak orogenic domain. In addition, the structural and thermomechanical characteristics modelled in this dissertation confirm previous analyses from geodynamic models pointing to the control of the observed heterogeneities in the orogen and foreland deformation style. These characteristics include the lithospheric and crustal thickness, the presence of weak sediments and the variations in gravitational potential energy. Specific conditions occur in the cold and strong northern foreland, which is characterized by active seismicity and thick-skinned structures, although the modelled crustal strength exceeds the typical values of externally-applied tectonic stresses. The additional mechanisms that could explain the strain localization in a region that should resist deformation are: (i) increased tectonic forces coming from the steepening of the slab and (ii) enhanced weakening along inherited structures from pre-Andean deformation events. Finally, the thermomechanical conditions of this sector of the foreland could be a key factor influencing the preservation of the flat subduction angle at these latitudes of the SCA. N2 - Die Anden sind eine ~7000 km lange N-S-verlaufende Hochgebirgskette, die entlang des westlichen südamerikanischen Kontinentalrandes entstanden ist. Aufgrund der Subduktion der ozeanischen Nazca-Platte unter die kontinentale südamerikanische Platte ist die Bildung des nördlichen und zentralen Teils des Gebirges typisch für eine nicht-kollisionale Orogenese. In den südlichen Zentralanden (SZA, 29-39° S) verändert sich der Subduktionswinkel der ozeanischen Platte zwischen 33 ° S und 35 ° S von fast horizontal (< 5° Einfallen) im Norden zu einem steileren Winkel (~ 30 ° Einfallen) im Süden. Begleitet wird dieser Trend von systematischen, Süd-gerichteten Abnahmen der topographischen Erhebung, der Krusteneinengung und der Vorland- und Orogenbreite, sowie von Variationen im Deformationsstil des Vorlandes, wo die Einengung des Deckgebirges in unterschiedlichem Maße von einer entsprechenden Deformation des Grundgebirges begleitet wird. . Darüber hinaus sind die SZA eine seismisch sehr aktive Region. Die Kontinentalplatte zeichnet sich durch eine relativ flache Seismizität (< 30 km Tiefe) aus, die sich hauptsächlich auf die Übergänge vom Orogen zu den Vorlandbereichen konzentriert; im Gegensatz dazu tritt tiefere Seismizität in den zentralen Bereichen des nördlichen Vorlandes auf. Darüber hinaus ist häufig auftretende Seismizität auch in den flachen Teilen der ozeanischen Platte und im Plattensegment mit flach einfallender Subduktion zwischen 31 ° S und 33 ° S festzustellen. Die beobachtete räumliche Heterogenität der tektonischen und seismischen Deformation in den SZA wurde auf mehrere Ursachen zurückgeführt, darunter Schwankungen der Sedimentmächtigkeit, das Vorhandensein vererbter Strukturen und Veränderungen des Subduktionswinkels der ozeanischen Platte. Es gibt jedoch bislang keine Studie, die den Zusammenhang zwischen der langfristigen rheologischen Konfiguration der SZA und den räumlichen Deformationsmustern untersucht hat. Darüber hinaus wurden die Auswirkungen der Dichte- und Mächtigkeitsvariationen in der kontinentalen Oberplatte und der verschiedenen Subduktionswinkel auf den rheologischen Zustand der Lithosphäre noch nicht grundlegend untersucht. Da die Rheologie von der Gesteinsart, dem Druck und der Temperatur abhängt, ist eine detaillierte Charakterisierung der Zusammensetzung, Struktur und des thermischen Feldes der Lithosphäre erforderlich. Daher habe ich unter Verwendung kombinierter Modellierungsansätze und geophysikalischer Daten die folgenden 3D Modelle für die Lithosphäre der SZA konstruiert: (i) ein auf seismischen Daten basierendes Struktur- und Dichtemodell, das anhand des beobachteten Schwerefeldes validiert wurde; (ii) ein thermisches Modell, das die Umwandlung von Mantelscherwellengeschwindigkeiten in Temperaturen mit Berechnungen des konduktiven Wärmetransports für stationäre Bedingungen in der obersten Lithosphäre (<50 km Tiefe) integriert und durch Temperatur- und Wärmeflussmessungen validiert wurde; und (iii) ein rheologisches Modell der langfristig bedingten Lithosphärenfestigkeit, das auf den zuvor erzeugten Modellen gründet. Die Ergebnisse dieser Dissertation zeigen, dass die thermischen und rheologischen Bedingungen in den heutigen SZA durch verschiedene Mechanismen in unterschiedlichen Tiefen gesteuert werden. In flachen Tiefen (< 50 km) wird das thermomechanische Feld durch die heterogene Zusammensetzung der kontinentalen Lithosphäre differenziert. Eine Überprägung durch die ozeanische Platte ist dort nachweisbar, wo die ozeanische Platte flach (< 85 km tief) und die radiogene Kruste dünn ist, was insgesamt zu niedrigeren Temperaturen und einer höheren Festigkeit im Vergleich zu Bereichen führt, in denen die Platte steil einfällt und die radiogene Kruste dick ist. In Tiefen > 50 km treten die größten Temperaturschwankungen dort auf, wo die subduzierten Platte nachgewiesen wurde, was bedeutet, dass das tiefe thermische Feld den Subduktionswinkel gesteuert wird. Die Ergebnisse dieser Doktorarbeit legen nahe, dass der langfristige thermomechanische Zustand der Lithosphäre die räumliche Verteilung rezenter Seismizität beeinflusst. Der größte Anteil innerhalb der Kontinentalplatte registrierter Erdbebentätigkeit tritt oberhalb des modellierten Übergangs von spröden zu duktilen Bedingungen auf. Außerdem besteht eine räumliche Korrelation zwischen Erdbebenclustern und den Übergängen von den mechanisch rigideren Vorlandbereichen (Forearc und Foreland) zum mechanisch schwächeren Orogen. Demgegenüber wird vermehrte Seismizität innerhalb der ozeanischen Platte auch dort nachgewiesen, wo entsprechend der Modellierung langfristig duktile Bedingungen erwartet werden. Ich habe daher den möglichen Einfluss zusätzlicher Mechanismen untersucht, die ein Auslösen dieser Erdbeben begünstigen könnten, darunter die Kompaktion von Sedimenten an der Subduktionsgrenzfläche und Dehydrationsreaktionen innerhalb der Platte. Dazu habe ich eine qualitative Analyse des Hydratationszustandes des Mantels unter Verwendung des Verhältnisses zwischen Kompressions- und Scherwellengeschwindigkeit (Vp/Vs-Verhältnis aus einemseismischen Tomographiemodell) durchgeführt. Die Ergebnisse dieser Analyse zeigen, dass der Großteil der Seismizität räumlich mit hydratisierten Bereichen in der subduzierten Platte und im darüber liegenden kontinentalen Mantel korreliert, mit Ausnahme eines Erdbebenclusters, das innerhalb des flachen Plattensegments auftritt. In diesem Bereich wechselt die subduzierte Platte von einem flachen in einen steilen Subduktionswinkel und Erdbeben werden wahrscheinlich durch Biegevorgänge in der Platte ausgelöst. Auch die wichtigsten Variationen in den beobachteten tektonischen Mustern scheinen durch die thermomechanische Konfiguration der Lithosphäre beeinflusst zu sein. Die mechanisch starken Bereiche von Forearc und Foreland zeigen aufgrund ihrer Verformungsbeständigkeit geringere Verkürzungsraten als der relativ schwache Bereich des Orogens. Darüber hinaus bestätigen die in dieser Dissertation modellierten strukturellen und thermomechanischen Eigenschaften der Lithosphäre auch frühere Analysen geodynamischer Simulationen, denen zufolge der Deformationsstil im Orogen- und Vorlandbereich jeweils von Variationen in der Lithosphären- und Krustendicke, im Vorhandensein schwacher Sedimente und in der gravitativen potentiellen Energie kontrolliert wird. Eine Sonderstellung nimmt der nordöstliche Vorlandbereich der SZA ein, wo eine verstärkte Seismizität und eine das Deck-und Grundgebirge erfassende Deformation zu beobachten sind, obwohl die modellierte Krustenfestigkeit dort Werte übersteigt, die für die in diesem Gebiet anzunehmenden tektonischen Spannungen typisch wären. . Mechanismen zur Lokalisierung verstärkter Deformation in einem Gebiet beitragen können, das nach den vorliegenden Modellen einer tektonischen Verformung widerstehen sollte, sind: (i) erhöhte tektonische Kräfte durch ein steileres Abtauchen der Platte und (ii) Schwächezonen in der Kruste, die auf prä-andine Deformationsereignisse zurückgehen. Schließlich könnten die thermomechanischen Bedingungen in diesem Teil des Vorlands einchlüsselfaktor für die Erhaltung des flachen Subduktionswinkels in diesen Breiten der SZA sein. KW - Andes KW - Anden KW - subduction KW - Subduktion KW - lithosphere KW - Lithosphäre KW - earthquakes KW - Erdbeben KW - modelling KW - Modellierung Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-549275 ER - TY - THES A1 - Hübner, Andrea T1 - Ein multityper Verzweigungsprozess als Modell zur Untersuchung der Ausbreitung von Covid-19 T1 - Modeling the spread of Covid-19 using a multitype branching process N2 - Im Zuge der Covid-19 Pandemie werden zwei Werte täglich diskutiert: Die zuletzt gemeldete Zahl der neu Infizierten und die sogenannte Reproduktionsrate. Sie gibt wieder, wie viele weitere Menschen ein an Corona erkranktes Individuum im Durchschnitt ansteckt. Für die Schätzung dieses Wertes gibt es viele Möglichkeiten - auch das Robert Koch-Institut gibt in seinem täglichen Situationsbericht stets zwei R-Werte an: Einen 4-Tage-R-Wert und einen weniger schwankenden 7-Tage-R-Wert. Diese Arbeit soll eine weitere Möglichkeit vorstellen, einige Aspekte der Pandemie zu modellieren und die Reproduktionsrate zu schätzen. In der ersten Hälfte der Arbeit werden die mathematischen Grundlagen vorgestellt, die man für die Modellierung benötigt. Hierbei wird davon ausgegangen, dass der Leser bereits ein Basisverständnis von stochastischen Prozessen hat. Im Abschnitt Grundlagen werden Verzweigungsprozesse mit einigen Beispielen eingeführt und die Ergebnisse aus diesem Themengebiet, die für diese Arbeit wichtig sind, präsentiert. Dabei gehen wir zuerst auf einfache Verzweigungsprozesse ein und erweitern diese dann auf Verzweigungsprozesse mit mehreren Typen. Um die Notation zu erleichtern, beschränken wir uns auf zwei Typen. Das Prinzip lässt sich aber auf eine beliebige Anzahl von Typen erweitern. Vor allem soll die Wichtigkeit des Parameters λ herausgestellt werden. Dieser Wert kann als durchschnittliche Zahl von Nachfahren eines Individuums interpretiert werden und bestimmt die Dynamik des Prozesses über einen längeren Zeitraum. In der Anwendung auf die Pandemie hat der Parameter λ die gleiche Rolle wie die Reproduktionsrate R. In der zweiten Hälfte dieser Arbeit stellen wir eine Anwendung der Theorie über Multitype Verzweigungsprozesse vor. Professor Yanev und seine Mitarbeiter modellieren in ihrer Veröffentlichung Branching stochastic processes as models of Covid-19 epidemic development die Ausbreitung des Corona Virus' über einen Verzweigungsprozess mit zwei Typen. Wir werden dieses Modell diskutieren und Schätzer daraus ableiten: Ziel ist es, die Reproduktionsrate zu ermitteln. Außerdem analysieren wir die Möglichkeiten, die Dunkelziffer (die Zahl nicht gemeldeter Krankheitsfälle) zu schätzen. Wir wenden die Schätzer auf die Zahlen von Deutschland an und werten diese schließlich aus. N2 - During the Covid-19 pandemic, the discussion about the situation has been dominated by two numbers: the number of daily new infected individuals and the reproduction rate. The latter is the average number of people, one infected individual will infect with the disease. Because the number of registered infected individuals is generally not equal to the actual number of people who carry the Corona virus, many facts about the pandemic have to be estimated and can not be known for certain. Since the reproduction rate is an important parameter to signify the course of the Pandemic, many ways to estimate it have been developed. The Institute of Robert Koch in Germany uses two reproduction rates R in their daily reports: The 4-days-R-value and the less fluctuating 7-days-Rvalue. This master thesis will develop another model to estimate the R-value and other interesting aspects of the pandemic. The first part of this thesis is dedicated to the mathematical foundations needed to understand the model. The reader is expected to already have basic understanding of stochastic processes. In the section Grundlagen we will discuss branching processes and present the results of their theory that are important for our work. We start by introducing simple branching processes and expand the results to multitype branching processes. In service of a simpler notation we will only consider twotype branching processes, but the results can be used for any number of types. The importance of the parameter λ shall be stressed. It can be seen as the average number of descendants of one individual and dictates the dynamic of the process over a long period of time. Applied to the modeling of the pandemic, λ plays the same role as the reproduction rate R. In the second part of this thesis will present an application of the previously developed theory about multitype branching processes. Prof. Yanev and his colleagues modeled in their publication Branching stochastic processes as models of Covid-19 epidemic development the spreading of the Corona virus by using a branching process with two types. We will discuss this model and deduce estimators from it. We want to estimate the reproduction rate and find a way to determine the number of not registered infected individuals. The estimators will be applied to the data from Germany and we will discuss the results. KW - Covid-19 KW - Corona KW - Reproduktionsrate KW - Verzweigungsprozess KW - Modellierung KW - Covid-19 KW - corona virus KW - reproduction rate KW - branching process KW - modeling Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-509225 ER - TY - THES A1 - Grum, Marcus T1 - Construction of a concept of neuronal modeling N2 - The business problem of having inefficient processes, imprecise process analyses, and simulations as well as non-transparent artificial neuronal network models can be overcome by an easy-to-use modeling concept. With the aim of developing a flexible and efficient approach to modeling, simulating, and optimizing processes, this paper proposes a flexible Concept of Neuronal Modeling (CoNM). The modeling concept, which is described by the modeling language designed and its mathematical formulation and is connected to a technical substantiation, is based on a collection of novel sub-artifacts. As these have been implemented as a computational model, the set of CoNM tools carries out novel kinds of Neuronal Process Modeling (NPM), Neuronal Process Simulations (NPS), and Neuronal Process Optimizations (NPO). The efficacy of the designed artifacts was demonstrated rigorously by means of six experiments and a simulator of real industrial production processes. N2 - Die vorliegende Arbeit addressiert das Geschäftsproblem von ineffizienten Prozessen, unpräzisen Prozessanalysen und -simulationen sowie untransparenten künstlichen neuronalen Netzwerken, indem ein Modellierungskonzept zum Neuronalen Modellieren konstruiert wird. Dieses neuartige Konzept des Neuronalen Modellierens (CoNM) fungiert als flexibler und effizienter Ansatz zum Modellieren, Simulieren und Optimieren von Prozessen mit Hilfe von neuronalen Netzwerken und wird mittels einer Modellierungssprache, dessen mathematischen Formalisierung und technischen Substanziierung sowie einer Sammlung von neuartigen Subartefakten beschrieben. In der Verwendung derer Implementierung als CoNM-Werkzeuge können somit neue Arten einer Neuronalen-Prozess-Modellierung (NPM), Neuronalen-Prozess-Simulation (NPS) sowie Neuronalen-Prozess-Optimierung (NPO) realisiert werden. Die Wirksamkeit der erstellten Artefakte wurde anhand von sechs Experimenten demonstriert sowie in einem Simulator in realen Produktionsprozessen gezeigt. T2 - Konzept des Neuronalen Modellierens KW - Deep Learning KW - Artificial Neuronal Network KW - Explainability KW - Interpretability KW - Business Process KW - Simulation KW - Optimization KW - Knowledge Management KW - Process Management KW - Modeling KW - Process KW - Knowledge KW - Learning KW - Enterprise Architecture KW - Industry 4.0 KW - Künstliche Neuronale Netzwerke KW - Erklärbarkeit KW - Interpretierbarkeit KW - Geschäftsprozess KW - Simulation KW - Optimierung KW - Wissensmanagement KW - Prozessmanagement KW - Modellierung KW - Prozess KW - Wissen KW - Lernen KW - Enterprise Architecture KW - Industrie 4.0 Y1 - 2021 ER - TY - THES A1 - Dehne, Julian T1 - Möglichkeiten und Limitationen der medialen Unterstützung forschenden Lernens N2 - Forschendes Lernen und die digitale Transformation sind zwei der wichtigsten Einflüsse auf die Entwicklung der Hochschuldidaktik im deutschprachigen Raum. Während das forschende Lernen als normative Theorie das sollen beschreibt, geben die digitalen Werkzeuge, alte wie neue, das können in vielen Bereichen vor. In der vorliegenden Arbeit wird ein Prozessmodell aufgestellt, was den Versuch unternimmt, das forschende Lernen hinsichtlich interaktiver, gruppenbasierter Prozesse zu systematisieren. Basierend auf dem entwickelten Modell wurde ein Softwareprototyp implementiert, der den gesamten Forschungsprozess begleiten kann. Dabei werden Gruppenformation, Feedback- und Reflexionsprozesse und das Peer Assessment mit Bildungstechnologien unterstützt. Die Entwicklungen wurden in einem qualitativen Experiment eingesetzt, um Systemwissen über die Möglichkeiten und Grenzen der digitalen Unterstützung von forschendem Lernen zu gewinnen. N2 - Research-based learning and digital transformation are two of the most important influences on the development of pedagogies of universities in German-speaking countries. While research-based learning as a normative theory explains the should, the digital tools, both old and new, provide the can in many areas. In the present work, a process model was developed, which captures research-based learning with regard to interactive, group-based processes. Based on this model a software prototype was implemented that can accompany the entire research process. Thereby group formation, feedback and reflection processes and peer assessment are supported with educational technology. The developed software was used in a qualitative experiment to gain knowledge about the possibilities and limits of digital support for research-based learning. T2 - Limits and chances of supporting inquiry-based learning with digital media KW - Forschendes Lernen KW - Digitale Medien KW - Modellierung KW - Bildungstechnologien KW - Educational Technologies KW - Digital Media KW - Inquiry-based learning KW - Modelling Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-497894 ER - TY - THES A1 - Senftleben, Robin T1 - Earth's magnetic field over the last 1000 years N2 - To investigate the reliability and stability of spherical harmonic models based on archeo/-paleomagnetic data, 2000 Geomagnetic models were calculated. All models are based on the same data set but with randomized uncertainties. Comparison of these models to the geomagnetic field model gufm1 showed that large scale magnetic field structures up to spherical harmonic degree 4 are stable throughout all models. Through a ranking of all models by comparing the dipole coefficients to gufm1 more realistic uncertainty estimates were derived than the authors of the data provide. The derived uncertainty estimates were used in further modelling, which combines archeo/-paleomagnetic and historical data. The huge difference in data count, accuracy and coverage of these two very different data sources made it necessary to introduce a time dependent spatial damping, which was constructed to constrain the spatial complexity of the model. Finally 501 models were calculated by considering that each data point is a Gaussian random variable, whose mean is the original value and whose standard deviation is its uncertainty. The final model arhimag1k is calculated by taking the mean of the 501 sets of Gauss coefficients. arhimag1k fits different dependent and independent data sets well. It shows an early reverse flux patch at the core-mantle boundary between 1000 AD and 1200 AD at the location of the South Atlantic Anomaly today. Another interesting feature is a high latitude flux patch over Greenland between 1200 and 1400 AD. The dipole moment shows a constant behaviour between 1600 and 1840 AD. In the second part of the thesis 4 new paleointensities from 4 different flows of the island Fogo, which is part of Cape Verde, are presented. The data is fitted well by arhimag1k with the exception of the value at 1663 of 28.3 microtesla, which is approximately 10 microtesla lower than the model suggest. N2 - Um die Stabilität und Zuverlässigkeit von sphärisch harmonischen Erdmagnetfeldmodellen, die auf paleomagnetischen und archeomagnetischen Daten basieren zu untersuchen wurden 2000 Erdmagnetfeldmodelle berechnet. Jedes dieser Modelle berechnet sich aus Daten, die mit zufälligen Unsicherheiten in die Inversion eingehen. Ein Vergleich dieser Modelle zum historischen Erdmagnetfeldmodell gufm1 zeigt, dass großflächige magnetische Strukturen bis zum sphärischen harmonischen Grad 4 stabil in allen Modellen sind. Ein Ranking der 2000 Modelle wurde verwendet, um realistischere Fehlerabschätzungen der Daten zu bekommen, als die, die von den Autoren angebeben werden. Diese Fehlerabschätzungen werden für die weitere Modellierung benutzt, welche historische und paleo-/archeomagnetiche Daten kombiniert. Der große Unterschied in der Anzahl der Daten und der räumlichen Verteilung dieser sehr verschiedenen Datenquellen machte es notwendig, eine zeitabhängige räumliche Dämpfung einzuführen. Diese ist so konstruiert, dass die räumlich Komplexität des Modelles in einem bestimmten Zeitintervall festgelegt wird. 501 Modelle wurde berechnet, indem jeder Datenpunkt als gaußsche Zufallsvariable gesehen wird mit dem Originalwert als Mittelwert und die Fehlerabschätzung als Standardabweichung. Das finale Modell arhimag1k berechnet sich aus dem Mittelwert der Gaußkoeffizienten aller 501 Modelle. arhimag1k fittet verschiedene abhängige und unabhängige Datensätze gut. Es zeigt eine frühe Anomaly an der Kern-Mantel Grenze zwischen 1000 und 1200 AD an der Lokation, wo auch die heutige Südatlantische Anomaly liegt. Eine andere interessante Auffälligkeit ist eine starke radiale Magnetfeldkomponente an der Kern-Mantel Grenze zwischen 1200 und 1400 AD über Grönland. Das Dipolmoment zeigt ein konstantes Verhalten von 1600 bis 1840 AD. Im zweiten Teil der Arbeit werden 4 neue Paleointensitäten der Insel Fogo, welches Teil von Kap Verde ist, presentiert. Diese neuen Daten werden gut von dem Modell arhimag1k gefittet, außer der Wert von 1663 AD mit 28.3 mikrotesla , welcher etwa 10 mikrotesla niedriger ist, als das Modell zeigt. T2 - Erdmagnetfeld der letzten 1000 Jahre KW - Earth's magnetic field KW - archeomagnetism KW - paleomagnetism KW - modelling KW - spherical harmonics KW - Erdmagnetfeld KW - Archäomagnetismus KW - Paläomagnetismus KW - Modellierung KW - Kugelflächenfunktionen Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-473150 ER - TY - THES A1 - Brune, Sascha T1 - Modelling continental rift dynamics T1 - Modellierung kontinentaler Riftdynamik N2 - Continental rift systems open up unique possibilities to study the geodynamic system of our planet: geodynamic localization processes are imprinted in the morphology of the rift by governing the time-dependent activity of faults, the topographic evolution of the rift or by controlling whether a rift is symmetric or asymmetric. Since lithospheric necking localizes strain towards the rift centre, deformation structures of previous rift phases are often well preserved and passive margins, the end product of continental rifting, retain key information about the tectonic history from rift inception to continental rupture. Current understanding of continental rift evolution is based on combining observations from active rifts with data collected at rifted margins. Connecting these isolated data sets is often accomplished in a conceptual way and leaves room for subjective interpretation. Geodynamic forward models, however, have the potential to link individual data sets in a quantitative manner, using additional constraints from rock mechanics and rheology, which allows to transcend previous conceptual models of rift evolution. By quantifying geodynamic processes within continental rifts, numerical modelling allows key insight to tectonic processes that operate also in other plate boundary settings, such as mid ocean ridges, collisional mountain chains or subduction zones. In this thesis, I combine numerical, plate-tectonic, analytical, and analogue modelling approaches, whereas numerical thermomechanical modelling constitutes the primary tool. This method advanced rapidly during the last two decades owing to dedicated software development and the availability of massively parallel computer facilities. Nevertheless, only recently the geodynamical modelling community was able to capture 3D lithospheric-scale rift dynamics from onset of extension to final continental rupture. The first chapter of this thesis provides a broad introduction to continental rifting, a summary of the applied rift modelling methods and a short overview of previews studies. The following chapters, which constitute the main part of this thesis feature studies on plate boundary dynamics in two and three dimension followed by global scale analyses (Fig. 1). Chapter II focuses on 2D geodynamic modelling of rifted margin formation. It highlights the formation of wide areas of hyperextended crustal slivers via rift migration as a key process that affected many rifted margins worldwide. This chapter also contains a study of rift velocity evolution, showing that rift strength loss and extension velocity are linked through a dynamic feed-back. This process results in abrupt accelerations of the involved plates during rifting illustrating for the first time that rift dynamics plays a role in changing global-scale plate motions. Since rift velocity affects key processes like faulting, melting and lower crustal flow, this study also implies that the slow-fast velocity evolution should be imprinted in rifted margin structures. Chapter III relies on 3D Cartesian rift models in order to investigate various aspects of rift obliquity. Oblique rifting occurs if the extension direction is not orthogonal to the rift trend. Using 3D lithospheric-scale models from rift initialisation to breakup I could isolate a characteristic evolution of dominant fault orientations. Further work in Chapter III addresses the impact of rift obliquity on the strength of the rift system. We illustrate that oblique rifting is mechanically preferred over orthogonal rifting, because the brittle yielding requires a lower tectonic force. This mechanism elucidates rift competition during South Atlantic rifting, where the more oblique Equatorial Atlantic Rift proceeded to breakup while the simultaneously active but less oblique West African rift system became a failed rift. Finally this Chapter also investigates the impact of a previous rift phase on current tectonic activity in the linkage area of the Kenyan with Ethiopian rift. We show that the along strike changes in rift style are not caused by changes in crustal rheology. Instead the rift linkage pattern in this area can be explained when accounting for the thinned crust and lithosphere of a Mesozoic rift event. Chapter IV investigates rifting from the global perspective. A first study extends the oblique rift topic of the previous chapter to global scale by investigating the frequency of oblique rifting during the last 230 million years. We find that approximately 70% of all ocean-forming rift segments involved an oblique component of extension where obliquities exceed 20°. This highlights the relevance of 3D approaches in modelling, surveying, and interpretation of many rifted margins. In a final study, we propose a link between continental rift activity, diffuse CO2 degassing and Mesozoic/Cenozoic climate changes. We used recent CO2 flux measurements in continental rifts to estimate worldwide rift-related CO2 release, which we based on the global extent of rifts through time. The first-order correlation to paleo-atmospheric CO2 proxy data suggests that rifts constitute a major element of the global carbon cycle. N2 - Kontinentale Grabensysteme eröffnen einzigartige Einsichten in das geodynamische System unseres Planeten: Geodynamische Lokalisierungs-prozesse prägen die Morphologie von Riftsystemen, indem sie die zeitabhängige Aktivität von Störungen, die topographische Entwicklung des Rifts oder dessen Symmetrieentwicklung kontrollieren. Da die Verformung oft in Richtung des Riftzentrums lokalisiert, sind die Deformationsstrukturen früherer Riftphasen meist gut erhalten und passive Ränder, die Endprodukte kontinentalen Riftings, beinhalten wichtige Informationen über die tektonische Geschichte vom Riftbeginn bis zum kontinentalen Zerbrechen. Unser gegenwärtiges Verständnis der Riftentwicklung basiert auf der Kombination von Beobachtungen in aktiven Rifts mit Informationen, die an passiven Kontinental-rändern gesammelt wurden. Die Einbindung dieser isolierten Datensätze erfolgt oft konzeptionell und lässt Raum für subjektive Interpretationen. Geodynamische Vorwärtsmodelle haben jedoch das Potenzial, einzelne Datensätze quantitativ zu verknüpfen, wobei zusätzliche Informationen aus der Gesteinsmechanik und Rheologie verwendet werden, die es ermöglichen, frühere konzeptionelle Riftmodelle weiter zu entwickeln. In dieser Arbeit kombiniere ich numerische, plattentektonische, analytische und analoge Modellierungsansätze, wobei die numerische thermomechanische Modellierung das primäre Werkzeug darstellt. Diese Methode hat sich in den letzten zwei Jahrzehnten aufgrund dedizierter Softwareentwicklung und der Verfügbarkeit von massiv parallelisierten Supercomputern sehr schnell entwickelt. Dennoch gelang es der geodynamischen Modellierungsgemeinschaft erst vor kurzem, die dreidimensionale lithosphärenskalige Riftentwicklung vom Beginn der Dehnung bis zum endgültigen Zerbrechen eines Kontinents zu erfassen. Meine Habilitationsschrift beinhaltet eine Einführung in kontinentale Rifttektonik, eine Zusammenfassung der angewendeten Modellierungsmethoden und einen kurzen Überblick über Vorstudien. In dem Hauptteil dieser Arbeit werden Untersuchungen auf Plattenrandskala in zwei und drei Dimensionen durchgeführt, gefolgt von globalen Analysen der Riftentwicklung. Dabei beschreibe ich die Bildung extrem ausgedehnter kontinentaler Kruste, die an vielen gerifteten Kontinentalrändern beobachtet wurde, die Rückkopplung zwischen Riftdynamik und Plattenbewegungen, der Wirkung von Riftschrägheit und tektonischer Vererbung auf die Riftarchitektur sowie den Einfluss von Riftsystemen auf CO2-Entgasung in Bezug auf die paläoklimatische Entwicklung der Erde seit dem Zerbrechen Pangäas. KW - rifting KW - modelling KW - plate tectonics KW - geodynamics KW - Grabenbruch KW - Modellierung KW - Plattentektonik KW - Geodynamik Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-432364 ER - TY - THES A1 - Raatz, Michael T1 - Strategies within predator-prey interactions – from individuals to ecosystems T1 - Strategien in Räuber-Beute Interaktionen – vom Individuum bis zum Ökosystem N2 - Predator-prey interactions provide central links in food webs. These interaction are directly or indirectly impacted by a number of factors. These factors range from physiological characteristics of individual organisms, over specifics of their interaction to impacts of the environment. They may generate the potential for the application of different strategies by predators and prey. Within this thesis, I modelled predator-prey interactions and investigated a broad range of different factors driving the application of certain strategies, that affect the individuals or their populations. In doing so, I focused on phytoplankton-zooplankton systems as established model systems of predator-prey interactions. At the level of predator physiology I proposed, and partly confirmed, adaptations to fluctuating availability of co-limiting nutrients as beneficial strategies. These may allow to store ingested nutrients or to regulate the effort put into nutrient assimilation. We found that these two strategies are beneficial at different fluctuation frequencies of the nutrients, but may positively interact at intermediate frequencies. The corresponding experiments supported our model results. We found that the temporal structure of nutrient fluctuations indeed has strong effects on the juvenile somatic growth rate of {\itshape Daphnia}. Predator colimitation by energy and essential biochemical nutrients gave rise to another physiological strategy. High-quality prey species may render themselves indispensable in a scenario of predator-mediated coexistence by being the only source of essential biochemical nutrients, such as cholesterol. Thereby, the high-quality prey may even compensate for a lacking defense and ensure its persistence in competition with other more defended prey species. We found a similar effect in a model where algae and bacteria compete for nutrients. Now, being the only source of a compound that is required by the competitor (bacteria) prevented the competitive exclusion of the algae. In this case, the essential compounds were the organic carbon provided by the algae. Here again, being indispensable served as a prey strategy that ensured its coexistence. The latter scenario also gave rise to the application of the two metabolic strategies of autotrophy and heterotrophy by algae and bacteria, respectively. We found that their coexistence allowed the recycling of resources in a microbial loop that would otherwise be lost. Instead, these resources were made available to higher trophic levels, increasing the trophic transfer efficiency in food webs. The predation process comprises the next higher level of factors shaping the predator-prey interaction, besides these factors that originated from the functioning or composition of individuals. Here, I focused on defensive mechanisms and investigated multiple scenarios of static or adaptive combinations of prey defense and predator offense. I confirmed and extended earlier reports on the coexistence-promoting effects of partially lower palatability of the prey community. When bacteria and algae are coexisting, a higher palatability of bacteria may increase the average predator biomass, with the side effect of making the population dynamics more regular. This may facilitate experimental investigations and interpretations. If defense and offense are adaptive, this allows organisms to maximize their growth rate. Besides this fitness-enhancing effect, I found that co-adaptation may provide the predator-prey system with the flexibility to buffer external perturbations. On top of these rather internal factors, environmental drivers also affect predator-prey interactions. I showed that environmental nutrient fluctuations may create a spatio-temporal resource heterogeneity that selects for different predator strategies. I hypothesized that this might favour either storage or acclimation specialists, depending on the frequency of the environmental fluctuations. We found that many of these factors promote the coexistence of different strategies and may therefore support and sustain biodiversity. Thus, they might be relevant for the maintenance of crucial ecosystem functions that also affect us humans. Besides this, the richness of factors that impact predator-prey interactions might explain why so many species, especially in the planktonic regime, are able to coexist. N2 - Organismen interagieren miteinander und mit ihrer Umwelt. Innerhalb dieses Netzwerks von Interaktionen sind Fraßbeziehungen zwischen Räubern und ihrer Beute von zentraler Bedeutung. Sie werden auf verschiedenen Ebenen von unterschiedlichen Faktoren beeinflusst, was zur Ausprägung von diversen Strategien von Räuber oder Beute führen kann. Diese Faktoren und die Strategien die sie hervor bringen sind Gegenstand dieser Doktorarbeit. In mehreren Modellierungsstudien habe ich vielseitige Faktoren untersucht, die sich dem Aufbau einzelner Organismen, Verteidigungs- und Angriffsmechanismen sowie Umwelteinflüssen zuordnen lassen. Dabei konzentrierte ich mich auf ein etabliertes Modellsystem zur Erforschung von Räuber-Beute-Dynamiken und untersuchte die Fraßbeziehung zwischen Phytoplankton als Beute und Zooplankton als Räuber. Ich fand heraus, dass die Bereitstellung von essentiellen Ressourcen für Konkurrenten oder Räuber eine Strategie sein kann, mit der Beutearten sich vor dem Aussterben schützen können. Auch die direkte Verteidigung gegen den Räuber ist eine häufige Strategie zur Verringerung des Fraßdrucks und kann ebenfalls Koexistenz fördern. Für anpassungsfähige Verteidigung der Beute und Angriffsstärke des Räubers konnte ich zeigen, dass dies sowohl die Fitness erhöhen, als auch die Robustheit der Räuber-Beute-Dynamiken gegen äußere Störungen erhöhen kann. Weiterhin fand ich heraus, dass physiologische Anpassungsmechanismen wie Speicherung oder anpassungsfähige Aufnahme von Nährstoffen die Wachstumsrate des Räubers verbessern können, wenn die Qualität der verfügbaren Beute in der Umwelt des Räubers fluktuiert. Viele der Strategien, die ich in dieser Arbeit herausgestellt habe, können die Koexistenz von verschiedenen Arten fördern und damit zu erhöhter Biodiversität beitragen, welche wiederum entscheidend ist für die Stabilität von Ökosystemen und deren Nutzbarkeit. KW - predator-prey KW - biodiversity KW - modelling KW - Räuber-Beute KW - Biodiversität KW - Modellierung Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-426587 ER - TY - THES A1 - Höllerer, Reinhard T1 - Modellierung und Optimierung von Bürgerdiensten am Beispiel der Stadt Landshut T1 - Modeling and optimization of civil services on the example of the city of Landshut N2 - Die Projektierung und Abwicklung sowie die statische und dynamische Analyse von Geschäftsprozessen im Bereich des Verwaltens und Regierens auf kommunaler, Länder- wie auch Bundesebene mit Hilfe von Informations- und Kommunikationstechniken beschäftigen Politiker und Strategen für Informationstechnologie ebenso wie die Öffentlichkeit seit Langem. Der hieraus entstandene Begriff E-Government wurde in der Folge aus den unterschiedlichsten technischen, politischen und semantischen Blickrichtungen beleuchtet. Die vorliegende Arbeit konzentriert sich dabei auf zwei Schwerpunktthemen: • Das erste Schwerpunktthema behandelt den Entwurf eines hierarchischen Architekturmodells, für welches sieben hierarchische Schichten identifiziert werden können. Diese erscheinen notwendig, aber auch hinreichend, um den allgemeinen Fall zu beschreiben. Den Hintergrund hierfür liefert die langjährige Prozess- und Verwaltungserfahrung als Leiter der EDV-Abteilung der Stadtverwaltung Landshut, eine kreisfreie Stadt mit rund 69.000 Einwohnern im Nordosten von München. Sie steht als Repräsentant für viele Verwaltungsvorgänge in der Bundesrepublik Deutschland und ist dennoch als Analyseobjekt in der Gesamtkomplexität und Prozessquantität überschaubar. Somit können aus der Analyse sämtlicher Kernabläufe statische und dynamische Strukturen extrahiert und abstrakt modelliert werden. Die Schwerpunkte liegen in der Darstellung der vorhandenen Bedienabläufe in einer Kommune. Die Transformation der Bedienanforderung in einem hierarchischen System, die Darstellung der Kontroll- und der Operationszustände in allen Schichten wie auch die Strategie der Fehlererkennung und Fehlerbehebung schaffen eine transparente Basis für umfassende Restrukturierungen und Optimierungen. Für die Modellierung wurde FMC-eCS eingesetzt, eine am Hasso-Plattner-Institut für Softwaresystemtechnik GmbH (HPI) im Fachgebiet Kommunikationssysteme entwickelte Methodik zur Modellierung zustandsdiskreter Systeme unter Berücksichtigung möglicher Inkonsistenzen (Betreuer: Prof. Dr.-Ing. Werner Zorn [ZW07a, ZW07b]). • Das zweite Schwerpunktthema widmet sich der quantitativen Modellierung und Optimierung von E-Government-Bediensystemen, welche am Beispiel des Bürgerbüros der Stadt Landshut im Zeitraum 2008 bis 2015 durchgeführt wurden. Dies erfolgt auf Basis einer kontinuierlichen Betriebsdatenerfassung mit aufwendiger Vorverarbeitung zur Extrahierung mathematisch beschreibbarer Wahrscheinlichkeitsverteilungen. Der hieraus entwickelte Dienstplan wurde hinsichtlich der erzielbaren Optimierungen im dauerhaften Echteinsatz verifiziert. [ZW07a] Zorn, Werner: «FMC-QE A New Approach in Quantitative Modeling», Vortrag anlässlich: MSV'07- The 2007 International Conference on Modeling, Simulation and Visualization Methods WorldComp2007, Las Vegas, 28.6.2007. [ZW07b] Zorn, Werner: «FMC-QE, A New Approach in Quantitative Modeling», Veröffentlichung, Hasso-Plattner-Institut für Softwaresystemtechnik an der Universität Potsdam, 28.6.2007. N2 - The project development and implementation as well as the static and dynamic analysis of business processes in the context of administration and governance on a municipal, federal state or national level by information and communication technology, has concerned the media along with politicians and strategists for information technology as well as the general public for a long time. The here-from defined term of E-Government has been examined as the focal point of discussion from most diverse technical, political and semantic perspectives. The present work focuses on two main topics: • The first main topic approaches the development of a hierarchical architecture model for which seven hierarchical layers can be identified. These seem to be necessary as well as sufficient to describe the general case. The background is provided by the long-term processual and administrative experience as head of the IT department at the municipality of Landshut, an independent city with 69.000 inhabitants located in the north-east of Munich. It is representative of many administrative processes in the Federal Republic of Germany, but nonetheless still manageable concerning its complexity and quantity of processes. Therefore, static and dynamic structures can be extracted from the analysis of all core workflows and modelled abstractly. The emphases lie on the description of the existing operating procedures in a municipality. The transformation of the operating requirements in a hierarchical system, the modeling of the control and operational states within all layers, as well as the strategy of error recognition and troubleshooting create a transparent basis for extensive restructuring and optimisation. For modeling was used FMC-eCS, a methodology for the description of state discrete systems, developed at the Hasso-Plattner-Institute for Software Systems Engineering (HPI) in the subject area of communication systems. Furthermore inconsistent system statuses are taken into consideration (advisor: Prof. Dr.-Ing. Werner Zorn [ZW02, …, ZW10]). • The second main topic focuses on the quantitative modeling and optimisation of the E-Government process chain at Landshut´s Citizens Advice Bureau (2008 up to 2015). This is based on a continuous data acquisition with sophisticated pre-processing to extract mathematically describable probability distributions. The derivation of a duty roster for actual application and a quality control conclusively verify the developed stochastic method. KW - E-Government KW - Modellierung KW - Optimierung KW - eGovernment KW - modeling KW - optimization Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-425986 ER - TY - THES A1 - Fuhrmann, Saskia T1 - Physiologically-based pharmacokinetic and mechanism-based pharmacodynamic modelling of monoclonal antibodies with a focus on tumour targeting T1 - Physiologie-basierte pharmakokinetische und mechanistische pharmakodynamische Modellierung von monoklonalen Antikörpern mit Fokus auf zielgerichtete Tumortherapie N2 - Monoclonal antibodies (mAbs) are an innovative group of drugs with increasing clinical importance in oncology, combining high specificity with generally low toxicity. There are, however, numerous challenges associated with the development of mAbs as therapeutics. Mechanistic understanding of factors that govern the pharmacokinetics (PK) of mAbs is critical for drug development and the optimisation of effective therapies; in particular, adequate dosing strategies can improve patient quality life and lower drug cost. Physiologically-based PK (PBPK) models offer a physiological and mechanistic framework, which is of advantage in the context of animal to human extrapolation. Unlike for small molecule drugs, however, there is no consensus on how to model mAb disposition in a PBPK context. Current PBPK models for mAb PK hugely vary in their representation of physiology and parameterisation. Their complexity poses a challenge for their applications, e.g., translating knowledge from animal species to humans. In this thesis, we developed and validated a consensus PBPK model for mAb disposition taking into account recent insights into mAb distribution (antibody biodistribution coefficients and interstitial immunoglobulin G (IgG) pharmacokinetics) to predict tissue PK across several pre-clinical species and humans based on plasma data only. The model allows to a priori predict target-independent (unspecific) mAb disposition processes as well as mAb disposition in concentration ranges, for which the unspecific clearance (CL) dominates target-mediated CL processes. This is often the case for mAb therapies at steady state dosing. The consensus PBPK model was then used and refined to address two important problems: 1) Immunodeficient mice are crucial models to evaluate mAb efficacy in cancer therapy. Protection from elimination by binding to the neonatal Fc receptor is known to be a major pathway influencing the unspecific CL of both, endogenous and therapeutic IgG. The concentration of endogenous IgG, however, is reduced in immunodeficient mouse models, and this effect on unspecific mAb CL is unknown, yet of great importance for the extrapolation to human in the context of mAb cancer therapy. 2) The distribution of mAbs into solid tumours is of great interest. To comprehensively investigate mAb distribution within tumour tissue and its implications for therapeutic efficacy, we extended the consensus PBPK model by a detailed tumour distribution model incorporating a cell-level model for mAb-target interaction. We studied the impact of variations in tumour microenvironment on therapeutic efficacy and explored the plausibility of different mechanisms of action in mAb cancer therapy. The mathematical findings and observed phenomena shed new light on therapeutic utility and dosing regimens in mAb cancer treatment. N2 - Monoklonale Antikörper (mAK) stellen durch ihre hohe Spezifität und geringe Toxizität eine innovative Arzneistoffklasse mit großer klinischer Bedeutung in der Krebstherapie dar. Es gibt jedoch eine Vielzahl an Herausforderungen, die mit der Entwicklung von mAK als Krebstherapeutika verbunden sind. Mechanistisches Verständnis der Pharmakokinetik (PK) von mAK ist wichtig für die Arzneimittelentwicklung sowie für die Therapieoptimierung. Adäquate Dosierungsstrategien können die Lebensqualität der Patienten erhöhen und die Gesundheitskosten senken. Physiologie-basierte PK (PBPK) Modelle bieten einen physiologischen und mechanistischen Rahmen für die Extrapolation von Tiermodellen auf den Menschen. Im Gegensatz zu kleinen chemischen Molekülen besteht für die PBPK Modellierung von mAK kein Konsens: Aktuelle Modelle unterscheiden sich stark hinsichtlich Physiologie und deren Parameterisierung. Die Komplexität dieser Modelle stellt eine große Herausforderung für ihre Anwendung dar. In der vorliegenden Arbeit entwickelten und validierten wir ein Konsens-PBPK-Modell für die mAK Disposition. Dabei wurden aktuelle Erkenntnisse zur mAK Verteilung berücksichtigt, um basierend auf Plasmadaten Vorhersagen für die PK im Gewebe verschiedener präklinischer sowie klinischer Spezies zu treffen. Das Modell erlaubt a priori Vorhersagen für die unspezifische (target-unabhängige) mAK Disposition als auch für die mAK Disposition in einem Konzentrationsbereich, für den die unspezifische Clearance (CL) die target-abhängige CL dominiert. Dies ist oft der Fall für mAK Therapien bei Steady-state-Dosierung. Anschließend wurde das Konsens-PBPK-Modell genutzt und verfeinert, um zwei wichtige Aspekte näher zu untersuchen: 1) Immundefiziente Mäuse sind wichtige Tiermodelle für die Evaluierung der mAK Wirksamkeit in der Tumortherapie. Die Bindung von Antikörpern an den neonatalen Fc Rezeptor schützt diese vor dem Abbau und beeinflusst somit maßgeblich die unspezifische CL von endogenen sowie therapeutischen Antikörpern. Die Konzentration von endogenem IgG in immundefizienten Mäusen ist reduziert. Dieser Effekt auf die unspezifische mAK CL ist unbekannt, jedoch wichtig für die Extrapolation auf den Menschen in der mAK Tumortherapie. 2) Die Verteilung von mAK innerhalb eines soliden Tumors ist von großer Bedeutung. Für die umfassende Untersuchung der mAK Verteilung innerhalb des Tumorgewebes wurde das Konsens-PBPK-Modell um ein detailliertes Tumor-Verteilungsmodell, welches die mAK-Target Interaktion auf Zellebene berücksichtigt, erweitert. Wir untersuchten den Einfluss von Variationen in der Tumor-Mikroumgebung auf die klinische Wirksamkeit von mAK und untersuchten die Plausibilität verschiedener Wirkmechanismen in der mAK Tumortherapie. Die mathematischen Ergebnisse sowie beobachteten Phänomene werfen ein neues Licht auf den therapeutischen Nutzen sowie Dosierungsschemata in der mAK Krebstherapie. KW - PBPK KW - monoclonal antibodies KW - modelling KW - PBPK KW - monoklonale Antikörper KW - Modellierung Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-418861 ER - TY - THES A1 - Schröder, Sarah T1 - Modelling surface evolution coupled with tectonics T1 - Modellierung von Oberflächenprozessen gekoppelt mit Tektonik BT - A case study for the Pamir BT - Eine Fallstudie zum Pamir N2 - This study presents the development of 1D and 2D Surface Evolution Codes (SECs) and their coupling to any lithospheric-scale (thermo-)mechanical code with a quadrilateral structured surface mesh. Both SECs involve diffusion as approach for hillslope processes and the stream power law to reflect riverbed incision. The 1D SEC settles sediment that was produced by fluvial incision in the appropriate minimum, while the supply-limited 2D SEC DANSER uses a fast filling algorithm to model sedimantation. It is based on a cellular automaton. A slope-dependent factor in the sediment flux extends the diffusion equation to nonlinear diffusion. The discharge accumulation is achieved with the D8-algorithm and an improved drainage accumulation routine. Lateral incision enhances the incision's modelling. Following empirical laws, it incises channels of several cells width. The coupling method enables different temporal and spatial resolutions of the SEC and the thermo-mechanical code. It transfers vertical as well as horizontal displacements to the surface model. A weighted smoothing of the 3D surface displacements is implemented. The smoothed displacement vectors transmit the deformation by bilinear interpolation to the surface model. These interpolation methods ensure mass conservation in both directions and prevent the two surfaces from drifting apart. The presented applications refer to the evolution of the Pamir orogen. A calibration of DANSER's parameters with geomorphological data and a DEM as initial topography highlights the advantage of lateral incision. Preserving the channel width and reflecting incision peaks in narrow channels, this closes the huge gap between current orogen-scale incision models and observed topographies. River capturing models in a system of fault-bounded block rotations reaffirm the importance of the lateral incision routine for capturing events with channel initiation. The models show a low probability of river capturings with large deflection angles. While the probability of river capturing is directly depending on the uplift rate, the erodibility inside of a dip-slip fault speeds up headward erosion along the fault: The model's capturing speed increases within a fault. Coupling DANSER with the thermo-mechanical code SLIM 3D emphasizes the versatility of the SEC. While DANSER has minor influence on the lithospheric evolution of an indenter model, the brittle surface deformation is strongly affected by its sedimentation, widening a basin in between two forming orogens and also the southern part of the southern orogen to south, east and west. N2 - Im Rahmen dieser Studie werden 1D und 2D Erosionsmodelle im Gebirgsmaßstab implementiert und mit Modellen für tektonische Deformation gekoppelt. Die Kopplungsmethode erlaubt unterschiedlich räumliche und zeitliche Auflösungen im tektonischen und im Erosionsmodell. Es werden sowohl vertikale als auch horizontale Bewegungen zwischen den Modellen transferiert. Darüber hinaus enthält die Kopplungsmethode ein Glättungsverfahren, um eventuelle Instabilitäten des tektonischen Modelles zu kompensieren. Beide Erosionsmodelle beziehen Hangerosion, Flusseinschneidung und Sedimentation ein. Der 1D Code nutzt Hack's Law, um die Wassermengen zu berechnen. Er garantiert Massenerhaltung, indem er Sedimente in Senken speichert. Das 2D Erosionsmodell DANSER basiert auf einem zellulären Automaten. Ein zusätzlicher steigungsabhängiger Faktor erweitert lineare zu nichtlinearer Diffusion. Wassermengen werden mit Hilfe des D8-Algorithmus und einer veränderten Form von O'Callaghans (1984) Algorithmus akkumuliert. Laterale Einschneidung, berechnet durch einen neuen Verteilungs-Algorithmus, verbessert die Modellierung von Flusssystemen. Flüsse sind dabei repräsentiert durch eine unterschiedliche Anzahl an Zellen orthogonal zur Fließrichtung. Ihre Breite wird nach empirischen Gesetzen ermittelt. Die präsentierten Anwendungen dienen der Studie des Pamirgebirges. Zunächst werden die Modellparameter anhand von Einschneidungs- und Erosionsraten sowie Sedimentdurchflüssen kalibriert. Ein digitales Höhenmodell dient als Anfangstopographie und zur Extraktion von Flussprofilen. Laterale Einschneidung zeigt eine deutliche Verbesserung zu bisher vorhandenen Modellen. Sie ermöglicht die Erhaltung der Flussbreite und zeigt hohe Einschneidungsraten in engen Flusspassagen. Modelle von Flussanzapfungen in einem System paralleler Verwerfungen bestätigen die Wichtigkeit von lateraler Einschneidung für Flussanzapfungsmodelle, die Hangerosion einbeziehen. Während die Modelle eine geringe Wahrscheinlichkeit von Flussanzapfungen mit hohem Ablenkungswinkel zeigen, belegen sie auch, dass deren (allgemeine) Wahrscheinlichkeit direkt von der Hebungsrate der Verwerfungen abhängt. Die Erodibilität beschleunigt lediglich die Geschwindigkeit von Flussanzapfungen. Ein Modell, das die Codes SLIM 3D und DANSER koppelt, dokumentiert die vielseitige Verwendbarkeit des neuen Codes: Es zeigt einen geringen Einfluss von Oberflächenprozessen auf die Lithosphärendeformation, während die Sedimentationsroutine erheblich auf spröde Oberflächendeformationen einwirkt. Das Modell legt nahe, dass Sedimentation ein zwischen zwei entstehenden Gebirgen gelegenes Becken weitet. Außerdem weitet sich der südlich von der interkontinentalen Kollisionszone gelegene Teil des Gebirge-Models ebenfalls durch Sedimentation. KW - erosion KW - coupling KW - SEC KW - surface evolution KW - thermo-mechanics KW - surface processes KW - DANSER KW - Pamir KW - Tien-Shan KW - Tian-Shan KW - tectonics KW - modelling KW - modeling KW - numerical model KW - simulation KW - surface KW - fluvial incision KW - hillslope diffusion KW - finite differences KW - finite elements KW - Eulerian grid KW - DANSER KW - DANSER KW - Erosion KW - Modellierung KW - Tektonik KW - Koppelung KW - SEC KW - numerische Modellierung KW - Oberflächenprozesse KW - Pamir KW - Tien-Shan KW - Tian-Shan KW - Tiefendeformation KW - Software KW - Simulation KW - Oberfläche KW - fluviale Einschneidung KW - Hangerosion KW - finite Differenzen KW - finite Elemente KW - Eulerische Gitter Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-90385 ER - TY - THES A1 - Lischke, Betty T1 - Food web regulation under different forcing regimes in shallow lakes T1 - Nahrungsnetzregulation unter verschiedenen Einflussfaktoren in Flachseen BT - synthesis and modelling BT - Synthese und Modellierung N2 - The standing stock and production of organismal biomass depends strongly on the organisms’ biotic environment, which arises from trophic and non-trophic interactions among them. The trophic interactions between the different groups of organisms form the food web of an ecosystem, with the autotrophic and bacterial production at the basis and potentially several levels of consumers on top of the producers. Feeding interactions can regulate communities either by severe grazing pressure or by shortage of resources or prey production, termed top-down and bottom-up control, respectively. The limitations of all communities conglomerate in the food web regulation, which is subject to abiotic and biotic forcing regimes arising from external and internal constraints. This dissertation presents the effects of alterations in two abiotic, external forcing regimes, terrestrial matter input and long-lasting low temperatures in winter. Diverse methodological approaches, a complex ecosystem model study and the analysis of two whole-lake measurements, were performed to investigate effects for the food web regulation and the resulting consequences at the species, community and ecosystem scale. Thus, all types of organisms, autotrophs and heterotrophs, at all trophic levels were investigated to gain a comprehensive overview of the effects of the two mentioned altered forcing regimes. In addition, an extensive evaluation of the trophic interactions and resulting carbon fluxes along the pelagic and benthic food web was performed to display the efficiencies of the trophic energy transfer within the food webs. All studies were conducted in shallow lakes, which is worldwide the most abundant type of lakes. The specific morphology of shallow lakes allows that the benthic production contributes substantially to the whole-lake production. Further, as shallow lakes are often small they are especially sensitive to both, changes in the input of terrestrial organic matter and the atmospheric temperature. Another characteristic of shallow lakes is their appearance in alternative stable states. They are either in a clear-water or turbid state, where macrophytes and phytoplankton dominate, respectively. Both states can stabilize themselves through various mechanisms. These two alternative states and stabilizing mechanisms are integrated in the complex ecosystem model PCLake, which was used to investigate the effects of the enhanced terrestrial particulate organic matter (t-POM) input to lakes. The food web regulation was altered by three distinct pathways: (1) Zoobenthos received more food, increased in biomass which favored benthivorous fish and those reduced the available light due to bioturbation. (2) Zooplankton substituted autochthonous organic matter in their diet by suspended t-POM, thus the autochthonous organic matter remaining in the water reduced its transparency. (3) T-POM suspended into the water and reduced directly the available light. As macrophytes are more light-sensitive than phytoplankton they suffered the most from the lower transparency. Consequently, the resilience of the clear-water state was reduced by enhanced t-POM inputs, which makes the turbid state more likely at a given nutrient concentration. In two subsequent winters long-lasting low temperatures and a concurrent long duration of ice coverage was observed which resulted in low overall adult fish biomasses in the two study lakes – Schulzensee and Gollinsee, characterized by having and not having submerged macrophytes, respectively. Before the partial winterkill of fish Schulzensee allowed for a higher proportion of piscivorous fish than Gollinsee. However, the partial winterkill of fish aligned both communities as piscivorous fish are more sensitive to low oxygen concentrations. Young of the year fish benefitted extremely from the absence of adult fish due to lower predation pressure. Therefore, they could exert a strong top-down control on crustaceans, which restructured the entire zooplankton community leading to low crustacean biomasses and a community composition characterized by copepodites and nauplii. As a result, ciliates were released from top-down control, increased to high biomasses compared to lakes of various trophic states and depths and dominated the zooplankton community. While being very abundant in the study lakes and having the highest weight specific grazing rates among the zooplankton, ciliates exerted potentially a strong top-down control on small phytoplankton and particle-attached bacteria. This resulted in a higher proportion of large phytoplankton compared to other lakes. Additionally, the phytoplankton community was evenly distributed presumably due to the numerous fast growing and highly specific ciliate grazers. Although, the pelagic food web was completely restructured after the subsequent partial winterkills of fish, both lakes were resistant to effects of this forcing regime at the ecosystem scale. The consistently high predation pressure on phytoplankton prevented that Schulzensee switched from the clear-water to the turbid state. Further mechanisms, which potentially stabilized the clear-water state, were allelopathic effects by macrophytes and nutrient limitation in summer. The pelagic autotrophic and bacterial production was an order of magnitude more efficient transferred to animal consumers than the respective benthic production, despite the alterations of the food web structure after the partial winterkill of fish. Thus, the compiled mass-balanced whole-lake food webs suggested that the benthic bacterial and autotrophic production, which exceeded those of the pelagic habitat, was not used by animal consumers. This holds even true if the food quality, additional consumers such as ciliates, benthic protozoa and meiobenthos, the pelagic-benthic link and the potential oxygen limitation of macrobenthos were considered. Therefore, low benthic efficiencies suggest that lakes are primarily pelagic systems at least at the animal consumer level. Overall, this dissertation gives insights into the regulation of organism groups in the pelagic and benthic habitat at each trophic level under two different forcing regimes and displays the efficiency of the carbon transfer in both habitats. The results underline that the alterations of external forcing regimes affect all hierarchical level including the ecosystem. N2 - Die Produktion neuer Organismenbiomasse bildet die Grundlage allen Lebens und hängt von zahlreichen Faktoren, wie den trophischen Interaktionen, ab. Diese limitieren Organismengemeinschaften entweder durch starken Fraß oder begrenzte Ressourcenverfügbarkeit, genannt top-down beziehungsweise bottom-up Kontrolle. Die Nahrungsnetzregulation umfasst die trophischen Interaktionen des Nahrungsnetzes. In dieser Dissertation wurde die Beeinflussung der Nahrungsnetzregulation durch die externen, abiotischen Einflussfaktoren (1) erhöhter Eintrag terrestrischen Kohlenstoffs und (2) lang anhaltende niedrige Temperaturen im Winter in Flachseen untersucht. Flachseen sind aufgrund ihrer Morphometrie sensitiv gegenüber diesen Einflussfaktoren, durch einen erheblichen Anteil benthischer Produktion an der Gesamtseeproduktion gekennzeichnet und treten im trüben oder klaren Zustand auf. Der erhöhte Eintrag terrestrischen Kohlenstoffs in Flachseen verringerte die Resilienz des klaren, Makrophyten dominierten Sees. Unter Nutzung eines komplexen Ökosystemmodells konnten verschiedene Wirkmechanismen dargestellt werden, die jeweils die Lichtverfügbarkeit für Makrophyten reduzierten. Dabei wirkte der zusätzliche terrestrische Kohlenstoff als Nahrungszuschuss für bottom-up kontrollierte benthische Konsumenten, wohingegen top-down kontrollierte pelagische Konsumenten autochthone Nahrungsquellen durch terrestrischen Kohlenstoff ersetzten. Niedrige Temperaturen im Winter verursachten lang anhaltende Eisbedeckung und somit ein Sauerstoffdefizit in beiden Untersuchungsseen. Dies führte zu einem Fischsterben, bei welchem der Anteil piscivorer Fische des Makrophyten dominierten Sees überproportional stark abnahm. Die Fischgemeinschaft beider Seen wurde ähnlicher und war insgesamt von 0+ Fischen gekennzeichnet, welche eine starke top-down Kontrolle auf die Crustaceen ausübten, was diese dezimierte und Ciliaten vom Fraßdruck befreite. Die Zooplanktongemeinschaft wurde von Ciliaten dominiert, welche durch hohe Fraßraten den Biomasseaufbau von Teilen des Phytoplanktons und den Bakterien limitierten. Die energetische Weitergabeeffizienz der pelagischen autotrophen und bakteriellen Produktion zu tierischen Konsumenten war trotz des erheblichen Einflusses des Fischsterbens um ein zehnfaches höher als im benthischen Nahrungsnetz, wie die Synthese von umfangreichen Messungen in Ganzseenexperimenten auf allen trophischen Ebenen zeigte. Die benthischen Konsumenten scheinen weder bottom-up, noch top-down und nur zum Teil Habitat limitiert zu sein, womit ihre Regulation noch unklar bleibt. Die untersuchten Einflussfaktoren wirkten regulierend auf der Art-, Gemeinschafts- und Ökosystemebene. Beide Seen waren resistent gegenüber der drastischen Nahrungsnetzrestrukturierung nach dem Fischsterben, wohingegen der Eintrag terrestrischen Kohlenstoffs die Resilienz des Makrophyten dominierten Zustands verringerte. Dies verdeutlicht die weitreichenden Folgen externer Einflussfaktoren und zeigt, dass methodisch diverse Analysen der Nahrungsnetzregulation entscheidend zum Verständnis der ablaufenden Prozesse beitragen. KW - lake food web KW - complex model KW - ciliates KW - benthic food web KW - allochthonous matter KW - particulate organic matter KW - plankton KW - winter fish kill KW - trophic transfer efficiency KW - bistability KW - Nahrungsnetz KW - Bistabilität KW - allochthoner Eintrag KW - Flachseen KW - Ciliaten KW - Phytoplankton KW - Zooplankton KW - benthische Nahrungskette KW - pelagische Nahrungskette KW - trophische Transfereffizienz KW - Winterfischsterben KW - Modellierung KW - Ökosystem Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-89149 ER - TY - BOOK A1 - Wätzoldt, Sebastian A1 - Giese, Holger T1 - Modeling collaborations in self-adaptive systems of systems BT - terms, characteristics, requirements, and scenarios N2 - An increasing demand on functionality and flexibility leads to an integration of beforehand isolated system solutions building a so-called System of Systems (SoS). Furthermore, the overall SoS should be adaptive to react on changing requirements and environmental conditions. Due SoS are composed of different independent systems that may join or leave the overall SoS at arbitrary point in times, the SoS structure varies during the systems lifetime and the overall SoS behavior emerges from the capabilities of the contained subsystems. In such complex system ensembles new demands of understanding the interaction among subsystems, the coupling of shared system knowledge and the influence of local adaptation strategies to the overall resulting system behavior arise. In this report, we formulate research questions with the focus of modeling interactions between system parts inside a SoS. Furthermore, we define our notion of important system types and terms by retrieving the current state of the art from literature. Having a common understanding of SoS, we discuss a set of typical SoS characteristics and derive general requirements for a collaboration modeling language. Additionally, we retrieve a broad spectrum of real scenarios and frameworks from literature and discuss how these scenarios cope with different characteristics of SoS. Finally, we discuss the state of the art for existing modeling languages that cope with collaborations for different system types such as SoS. N2 - Steigende Anforderungen zum Funktionsumfang und der Flexibilität von Systemen führt zur Integration von zuvor isolierten Systemlösungen zu sogenannten System of Systems (SoS). Weiterhin sollten solche SoS adaptive Eigenschaften aufweisen, die es ihm ermöglichen auf sich ändernde Anforderungen und Umwelteinflüsse zu reagieren. Weil SoS aus unterschiedlichen, unabhängigen Subsystemen zusammengesetzt sind, die wiederum das übergeordnete SoS zu beliebigen Zeitpunkten erweitern oder verlassen können, ist das SoS durch eine variable Systemstruktur gekennzeichnet. Weiterhin definieren sich der Funktionsumfang des SoS und dessen Potenzial aus den enthaltenen Subsystemen. Solche komplexen Systemzusammenstellungen erfordern neue Untersuchungstechniken, um die Interaktion der einzelnen Subsysteme, die Kopplung von geteilten Daten und den Einfluss von lokalen Adaptionsstrategien auf das Gesamtsystem besser verstehen zu können. In diesem Bericht formulieren wir aktuelle Forschungsfragen mit dem Fokus auf der Modellierung von Interaktionen zwischen verschiedenen Systemteilen innerhalt eines SoS. Weiterhin definieren wir wichtige Systemtypen und Begriffe aus diesem Bereich durch das Zusammentragen aktueller Literatur. Nachdem wir ein gemeinsames Verständnis über SoS geschaffen haben, leiten wir typische SoS Eigenschaften und allgemeine Anforderungen für eine Modellierungssprache für Kollaborationen ab. Zusätzlich führen wir eine Literaturstudie durch, in der wir ein breites Spektrum von realen Szenarios und existierenden Frameworks zusammentragen, an denen wir die aufgezeigten SoS Eigenschaften diskutieren. Abschließend beschreiben wir den Stand der Wissenschaft bezüglich existierender Modellierungssprachen, die sich mit Kollaborationen in verschiedenen Arten von Systemen, wie SoS, beschäftigen. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 96 KW - modeling KW - collaboration KW - system of systems KW - cyber-physical systems KW - feedback loops KW - adaptive systems KW - Modellierung KW - Kollaborationen KW - System of Systems KW - Cyber-Physical Systems KW - Feedback Loops KW - adaptive Systeme Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-73036 SN - 978-3-86956-324-4 SN - 1613-5652 SN - 2191-1665 IS - 96 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - THES A1 - Becker, Basil T1 - Architectural modelling and verification of open service-oriented systems of systems T1 - Architekturmodellierung und Verifikation von offenen und service-orientierten Systems of Systems N2 - Systems of Systems (SoS) have received a lot of attention recently. In this thesis we will focus on SoS that are built atop the techniques of Service-Oriented Architectures and thus combine the benefits and challenges of both paradigms. For this thesis we will understand SoS as ensembles of single autonomous systems that are integrated to a larger system, the SoS. The interesting fact about these systems is that the previously isolated systems are still maintained, improved and developed on their own. Structural dynamics is an issue in SoS, as at every point in time systems can join and leave the ensemble. This and the fact that the cooperation among the constituent systems is not necessarily observable means that we will consider these systems as open systems. Of course, the system has a clear boundary at each point in time, but this can only be identified by halting the complete SoS. However, halting a system of that size is practically impossible. Often SoS are combinations of software systems and physical systems. Hence a failure in the software system can have a serious physical impact what makes an SoS of this kind easily a safety-critical system. The contribution of this thesis is a modelling approach that extends OMG's SoaML and basically relies on collaborations and roles as an abstraction layer above the components. This will allow us to describe SoS at an architectural level. We will also give a formal semantics for our modelling approach which employs hybrid graph-transformation systems. The modelling approach is accompanied by a modular verification scheme that will be able to cope with the complexity constraints implied by the SoS' structural dynamics and size. Building such autonomous systems as SoS without evolution at the architectural level --- i. e. adding and removing of components and services --- is inadequate. Therefore our approach directly supports the modelling and verification of evolution. N2 - Systems of Systems (SoS) sind ein seit längerem bekanntes Konzept, das jedoch in letzter Zeit vermehrt Aufmerksamkeit erhielt. Das Hauptaugenmerk dieser Arbeit wird auf SoS liegen, die mit Hilfe von Techniken aus Service-Orientierten Architekturen erstellt werden. Somit vereinen die hier betrachteten SoS die Vorteile und Herausforderungen beider Paradigmen. SoS können definiert werden als Zusammenschlüsse einzelner, autonomer Systeme, die zu einem größeren System integriert werden. In diesem Zusammenhang interessant ist, dass die ehemals isolierten Systeme nach wie vor isoliert voneinander weiterentwickelt und gewartet werden. Desweiteren kommt der Strukturdynamik innerhalb des SoS eine beachtliche Bedeutung zu, da jederzeit Systeme dem SoS beitreten und es verlassen können. Zusammen mit der Tatsache, dass die Kooperationen zwischen den konstituierenden Systemen nicht immer beobachtbar sind, führt dies dazu, dass wir diese Systeme als offene Systeme bezeichnen. Wobei das System natürlich jederzeit eine klar definierte Grenze besitzt, diese aber nur durch ein Anhalten des Systems zu bestimmen ist. Dies jedoch ist, von einer praktischen Perspektive aus betrachtet, unmöglich. Häufig stellen SoS eine Kombination aus Softwaresystemen und pyhsikalischen Systemen dar mit der Folge, dass ein Fehler in der Software eine SoS schnell eine immense physikalische Wirkung entwickeln kann. Von daher fallen SoS leicht in die Klasse der sicherheitskritischen Systeme. In dieser Arbeit werden wir einen Modellierungsansatz vorstellen, der die Sprache SoaML der OMG erweitert. Die grundlegenden Konzepte dieses Ansatzes sind die Modellierung mit Kollaborationen und Rollen als Abstraktionsebene über Komponenten. Der vorgestellte Ansatz erlaubt es uns SoS auf einer architekturellen Ebene zu betrachten. Die formale Semantik unseres Modellierungsansatzes ist durch hybride Graphtransformationssysteme gegeben. Abgestimmt auf die Modellierung werden wir ebenfalls ein Verfahren zu Verifikation von SoS vorstellen, welches trotz der inhärenten Komplexität von SoS, diese zu verifizieren. Die Modellierung und Verifikation von Evolution wird von unserem Ansatz direkt unterstützt. KW - Modellierung KW - Verifikation KW - Evolution KW - Systems of Systems KW - Service-orientierte Systeme KW - modelling KW - verification KW - evolution KW - systems of systems KW - service-oriented systems Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-70158 ER - TY - BOOK A1 - Giese, Holger A1 - Becker, Basil T1 - Modeling and verifying dynamic evolving service-oriented architectures N2 - The service-oriented architecture supports the dynamic assembly and runtime reconfiguration of complex open IT landscapes by means of runtime binding of service contracts, launching of new components and termination of outdated ones. Furthermore, the evolution of these IT landscapes is not restricted to exchanging components with other ones using the same service contracts, as new services contracts can be added as well. However, current approaches for modeling and verification of service-oriented architectures do not support these important capabilities to their full extend.In this report we present an extension of the current OMG proposal for service modeling with UML - SoaML - which overcomes these limitations. It permits modeling services and their service contracts at different levels of abstraction, provides a formal semantics for all modeling concepts, and enables verifying critical properties. Our compositional and incremental verification approach allows for complex properties including communication parameters and time and covers besides the dynamic binding of service contracts and the replacement of components also the evolution of the systems by means of new service contracts. The modeling as well as verification capabilities of the presented approach are demonstrated by means of a supply chain example and the verification results of a first prototype are shown. N2 - Service-Orientierte Architekturen erlauben die dynamische Zusammensetzung und Rekonfiguration komplexer, offener IT Landschaften durch Bindung von Service Contracts zur Laufzeit, starten neuer Komponenten und beenden von veralteten. Die Evolution dieser Systeme ist nicht auf den Austausch von Komponenten-Implementierungen bei Beibehaltung der Service-Contracts beschränkt, sondern das Hinzufügen neuer Service-Contracts wird ebenfalls unterstützt. Aktuelle Ansätze zur Modellierung und Verifikation Service-Orientierter Architekturen unterstützen diese wichtigen Eigenschaften, wenn überhaupt, nur unvollständig. In diesem Bericht stellen wir eine Erweiterung des aktuellen OMG Vorschlags zur Service Modellierung mit UML - SoaML - vor, die diese Einschränkungen aufhebt. Unser Ansatz erlaubt die Modellierung von Service Contracts auf verschiedenen Abstraktionsniveaus, besitzt eine fundierte formale Semantik für alle eingeführten Modellierungskonzepte und erlaubt die Verifikation kritischer Eigenschaften. Unser kompositionaler und inkrementeller Verifikationsansatz erlaubt die Verifikation komplexer Eigenschaften einschließlich Kommunikationsparameter und Zeit und deckt neben der dynamischen Bindung von Service Contracts sowie dem Austausch von Komponenten auch die Evolution des gesamten Systems durch das Hinzufügen neuer Service Contracts ab. Die Modellierungs- als auch die Verifikationsfähigkeiten unseres vorgestellten Ansatzes werden durch ein Anwendungsbeispiel aus dem Bereich des Lieferkettenmanagements veranschaulicht. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 75 KW - Service-Orientierte Architekturen KW - Verifikation KW - Contracts KW - Evolution KW - Unbegrenzter Zustandsraum KW - Invarianten KW - Modellierung KW - SoaML KW - Service-Oriented Architecture KW - Verification KW - Contracts KW - Evolution KW - Infinite State KW - Invariants KW - Modeling KW - SoaML KW - Runtime Binding Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-65112 SN - 978-3-86956-246-9 PB - Universitätsverlag Potsdam CY - Potsdam ER -