TY - THES A1 - Federico, Stefania T1 - Synthetic peptides derived from decorin as building blocks for biomaterials based on supramolecular interactions T1 - Synthetische Peptide Basierend auf Decorin als Bausteine für Supramolekulare Biomaterialien N2 - In this work, the development of a new molecular building block, based on synthetic peptides derived from decorin, is presented. These peptides represent a promising basis for the design of polymer-based biomaterials that mimic the ECM on a molecular level and exploit specific biological recognition for technical applications. Multiple sequence alignments of the internal repeats of decorin that formed the inner and outer surface of the arch-shaped protein were used to develop consensus sequences. These sequences contained conserved sequence motifs that are likely to be related to structural and functional features of the protein. Peptides representative for the consensus sequences were synthesized by microwave-assisted solid phase peptide synthesis and purified by RP-HPLC, with purities higher than 95 mol%. After confirming the desired masses by MALDI-TOF-MS, the primary structure of each peptide was investigated by 1H and 2D NMR, from which a full assignment of the chemical shifts was obtained. The characterization of the peptides conformation in solution was performed by CD spectroscopy, which demonstrated that using TFE, the peptides from the outer surface of decorin show a high propensity to fold into helical structures as observed in the original protein. To the contrary, the peptides from the inner surface did not show propensity to form stable secondary structure. The investigation of the binding capability of the peptides to Collagen I was performed by surface plasmon resonance analyses, from which all but one of the peptides representing the inner surface of decorin showed binding affinity to collagen with values of dissociation constant between 2•10-7 M and 2.3•10-4 M. On the other hand, the peptides representative for the outer surface of decorin did not show any significant interaction to collagen. This information was then used to develop experimental demonstration for the binding capabilities of the peptides from the inner surface of decorin to collagen even when used in more complicated situations close to possible appications. With this purpose, the peptide (LRELHLNNN) which showed the highest binding affinity to collagen (2•10-7 M) was functionalized with an N-terminal triple bond in order to obtain a peptide dimer via copper(I)-catalyzed cycloaddition reaction with 4,4'-diazidostilbene-2,2'-disulfonic acid. Rheological measurements showed that the presence of the peptide dimer was able to enhance the elastic modulus (G') of a collagen gel from ~ 600 Pa (collagen alone) to ~ 2700 Pa (collagen and peptide dimer). Moreover, it was shown that the mechanical properties of a collagen gel can be tailored by using different molar ratios of peptide dimer respect to collagen. The same peptide, functionalized with the triple bond, was used to obtain a peptide-dye conjugate by coupling it with N-(5'-azidopentanoyl)-5-aminofluorescein. An aqueous solution (5 vol% methanol) of the peptide dye conjugate was injected into a collagen and a hyaluronic acid (HA) gel and images of fluorescence detection showed that the diffusion of the peptide was slower in the collagen gel compared to the HA gel. The third experimental demonstration was gained using the peptide (LSELRLHNN) which showed the lower binding affinity (2.3•10-4 M) to collagen. This peptide was grafted to hyaluronic acid via EDC-chemistry, with a degree of functionalization of 7 ± 2 mol% as calculated by 1H-NMR. The grafting was further confirmed by FTIR and TGA measurements, which showed that the onset of decomposition for the HA-g-peptide decreased by 10 °C compared to the native HA. Rheological measurements showed that the elastic modulus of a system based on collagen and HA-g-peptide increased by almost two order of magnitude (G' = 200 Pa) compared to a system based on collagen and HA (G' = 0.9 Pa). Overall, this study showed that the synthetic peptides, which were identified from decorin, can be applied as potential building blocks for biomimetic materials that function via biological recognition. N2 - In dieser Arbeit wird das Design, die Synthese und Analyse neuer molekularer Bausteine für Biomaterialien basierend auf synthetischen, von Decorin abgeleiteten Peptiden beschrieben. Diese Peptide sind deshalb als Baustein für polymer-basierte Biomaterialien von besonderem Interesse, da sie die extrazelluläre Matrix (ECM) auf molekularer Ebene nachempfinden und spezifische, biologische wichtige Interaktionen für technische Anwendungen nutzbar machen. Das Alignment multipler Sequenzen der internen Repeats von Decorin, die jeweils die innere bzw. äußere Seite des sichelförmigen Decorins bilden, wurde genutzt, um Konsensus-Sequenzen zu definieren. Diese Sequenzen beinhalten stark konservierte Sequenzmotive, die wahrscheinlich wichtig für Struktur und Funktion des Proteins sind. Ausgewählte Peptide, die repräsentativ für die Konsensus-Sequenzen sind, wurden dann mittels Mikrowellen unterstützter Festphasensynthese synthetisiert und mit RP-HPLC aufgereinigt, so dass Peptide mit Reinheiten ≥ 95 mol% erhalten wurden. Die Peptide wurden per MALDI-TOF-MS sowie 1D und 2D NMR Spektroskopie charakterisiert, wobei die Zuordnung der chemischen Verschiebungen zu einzelnen Protonen und Kohlenstoffen aus den 2D NMR Experimenten erfolgte. In Lösung wurden die Peptide zudem mit CD Spektroskopie untersucht, wobei gezeigt werden konnte, dass nur Peptide, die von der äußeren Seite des Decorins abgeleitet wurden, sich durch Zugabe von 2,2,2-Trifluorethanol zu α-Helices falten. Diese Faltung ist auch in der Röntgenstruktur bei den korrespondierenden Abschnitten zu finden. Im Gegensatz dazu zeigten Peptide, die von der inneren Seite des Decorins abgeleitet wurden, keine stabilen Sekundärstrukturen in Lösung (β-Faltblattstruktur in der Röntgenstruktur). Bindungsstudien der Peptide zu Kollagen I wurden mit Oberflächenplasmonenresonanz durchgeführt, wobei gezeigt werden konnte, dass alle bis auf ein Peptid, die von der innneren Seite abgeleitet wurden, an Kollagen mit Dissoziationskonstanten von 2•10-7 M bis 2.3•10-4 M binden, während Peptide, die für die äußere Seite von Decorin repräsentativ sind, keine Bindung an Kollagen I zeigten. Diese Information wurde genutzt, um experimentelle Demonstrationsobjekte dieser Interaktion in komplexeren, einer späteren Anwendung näheren Situation, zu entwickeln. Dazu wurde das Peptide LRELHLNNN, welches die stärkste Bindung zu Kollagen I zeigte (KD = 2•10-7 M), N-terminal mit einer Alkinbindung funktionalisiert, so dass durch Kupfer (I) katalysierte Reaktion mit 4,4'-Diazidostilben-2,2'-disulfonsäure ein Peptid-Dimer erhalten werden konnte. Rheologische Untersuchungen zeigten, dass durch Zugabe des Peptid-Dimers der Elastizitätsmodul G' von Kollagen-Gelen von ~ 600 Pa (nur Kollagen) auf ~ 2700 Pa (Kollagen und Peptide-Dimer) gesteigert werden konnte. Darüber hinaus konnte gezeigt werden, dass die Veränderung der mechanischen Eigenschaften der Gele durch Veränderung des Kollagen:Peptid-Dimer Verhältnisses angepasst werden konnten. Das gleiche, mit einer Alkin-Bindung funktionaliserte Peptid wurde dann zur Darstellung eines Peptid-Fluorescein Konjugats genutzt, indem es mit N-(5'-azidopentanoyl)-5-aminofluorescein umgesetzt wurde. Eine wässrige Lösung des Peptid-Farbstoff-Konjugats wurde dann in Kollagen- bzw. Hyaluronsäuregele injiziert. Die Diffusion des Peptid-Farbstoff-Konjugats war in Kollagengelen im Vergleich zu Hyaluronsäuregelen deutlich verlangsamt. Das dritte Demonstrationsobjekt wurde erhalten, indem das Peptid LSELRLHNN, welches die geringste Bindung an Kollagen zeigte (KD = 2.3•10-4 M), auf Hyaluronsäure (HA) gegrafted wurde. Die Reaktion wurde durch Carbodiimid-mediierte Kupplung erreicht, und ein Funktionalisierungsgrad von 7 ± 2 mol% wurde durch Integration der 1H-NMR Spektren bestimmt. Das erfolgreiche Grafting wurde durch FTIR- und TGA-Untersuchungen bestätigt. In letzteren wurde gezeigt, dass der thermische Abbau durch das Grafting bei etwas niedrigeren Temperaturen beginnt als der Abbau reiner Hyaluronsäure (ΔT = 10 °C). Rheologische Untersuchungen zeigten, dass ein System aus Kollagen und HA-g-Peptid ein um zwei Größenordnungen höheren Elastizitätsmodul G' hat (G' = 200 Pa) als Systeme, die aus einer physikalischen Mischung von Kollagen und HA bestehen (G' = 0.9 Pa). Zusammenfassend konnte gezeigt werden, dass die Peptide, die von Decorin abgeleitet wurden, als Kollagen-bindende Bausteine für biomimetische Materialien genutzt werden können. KW - Decorin KW - Peptide KW - Supramolekularen Wechselwirkungen KW - Kollagen KW - Physikalische Vernetzung KW - Decorin KW - Peptides KW - Supramolecular Interactions KW - Collagen KW - Physical Crosslinking Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-59661 ER - TY - THES A1 - Geßner, André T1 - Neuartige Lanthanoid-dotierte mikro- und mesoporöse Feststoffe : Charakterisierung von Ion-Wirt-Wechselwirkungen, Speziesverteilung und Lumineszenzeigenschaften mittels zeitaufgelöster Lumineszenzspektroskopie T1 - Novel lanthanide doped micro- and mesoporous solids : characterization of ion-host-interactions, species distribution and luminescence properties using time-resolved luminescence spectroscopy N2 - Poröse Sol-Gel-Materialien finden in vielen Bereichen Anwendung bzw. sind Gegenstand der aktuellen Forschung. Zu diesen Bereichen zählen sowohl klassische Anwendungen, wie z. B. die Verwendung als Katalysator, Molekularsieb oder Trockenmittel, als auch nichtklassische Anwendungen, wie z. B. der Einsatz als Kontrastmittel in der Magnet-Resonanz-Tomographie oder in Form von dünnen Zeolithfilmen als Isolatoren in Mikrochips. Auch für den Einsatz in der Photonik werden poröse Materialien in Betracht gezogen, wie die Entwicklung des Zeolith-Farbstoff-Lasers zeigt. Mikroporöse Zeolithe können generell über einfache Ionenaustauschreaktionen mit Lanthanoidionen in lumineszente Materialien umgewandelt werden. Neben der Erzeugung eines lumineszenten Materials, dessen Lumineszenzeigenschaften charakterisiert werden müssen, bietet die Nutzung von Lanthanoidionen die Möglichkeit diese Ionen als Sonde zur Charakterisierung der Ion-Wirt-Wechselwirkungen zu funktionalisieren, was z. B. in Bezug auf die Anwendung als Katalysator von großer Bedeutung ist. Dabei werden die einzigartigen Lumineszenzeigenschaften der Lanthanoidionen, in diesem Fall von Europium(III) und Terbium(III), genutzt. In dieser Arbeit wurden Lanthanoid-dotierte mikroporöse Zeolithe, mikroporös-mesoporöse Hybridmaterialien und mesoporöse Silikate hinsichtlich ihrer Lumineszenzeigenschaften und ihrer Wechselwirkung des Wirtsmaterials mit den Lanthanoidionen mittels zeitaufgelöster Lumineszenzspektroskopie untersucht. Zeitaufgelöste Emissionsspektren (TRES) liefern dabei sowohl Informationen in der Wellenlängen- als auch in der Zeitdomäne. Erstmalig wurden die TRES mittels einer umfangreichen Auswertemethodik behandelt. Neben der Anpassung des Abklingverhaltens mit einer diskreten Zahl von Exponentialfunktionen, wurden unterstützend auch Abklingzeitverteilungsanalysen durchgeführt. Zeitaufgelöste flächennormierte Emissionsspektren (TRANES), eine Erweiterung der normalen TRES, konnten erstmals zur Bestimmung der Zahl der emittierenden Lanthanoidspezies in porösen Materialien genutzt werden. Durch die Berechnung der Decayassoziierten Spektren (DAS) konnten den Lanthanoidspezies die entsprechenden Lumineszenzspektren zugeordnet werden. Zusätzlich konnte, speziell im Fall der Europium-Lumineszenz, durch Kombination von zeitlicher und spektraler Information das zeitabhängige Asymmetrieverhältnis R und die spektrale Evolution des 5D0-7F0-Übergangs mit der Zeit t untersucht und somit wesentliche Informationen über die Verteilung der Europiumionen im Wirtsmaterial erhalten werden. Über die Abklingzeit und das Asymmetrieverhältnis R konnten Rückschlüsse auf die Zahl der OH-Oszillatoren in der ersten Koordinationssphäre und die Symmetrie der Koordinationsumgebung gezogen werden. Für die mikroporösen und mikroporös-mesoporösen Materialien wurden verschiedene Lanthanoidspezies, im Regelfall zwei, gefunden, welche entsprechend der beschriebenen Methoden charakterisiert wurden. Diese Lanthanoidspezies konnten Positionen in den Materialien zugeordnet werden, die sich im tief Inneren des Porensystems oder auf bzw. nahe der äußeren Oberfläche oder in den Mesoporen befinden. Erstere Spezies ist aufgrund ihrer Position im Material gut vor Feuchtigkeitseinflüssen geschützt, was sich deutlich in entsprechend langen Lumineszenzabklingzeiten äußert. Zusätzlich ist diese Europiumspezies durch unsymmetrische Koordinationsumgebung charakterisiert, was auf einen signifikanten Anteil an Koordination der Lanthanoidionen durch die Sauerstoffatome im Wirtsgitter zurückzuführen ist. Ionen, die sich nahe oder auf der äußeren Oberfläche befinden, sind dagegen für Feuchtigkeit zugänglicher, was in kürzeren Lumineszenzabklingzeiten und einer symmetrischeren Koordinationsumgebung resultiert. Der Anteil von Wassermolekülen in der ersten Koordinationssphäre ist hier deutlich größer, als bei den Ionen, die sich tiefer im Porensystem befinden und entspricht in vielen Fällen der Koordinationszahl eines vollständig hydratisierten Lanthanoidions. Auch der Einfluss von Oberflächenmodifikationen auf die Speziesverteilung und das Verhalten der Materialien gegenüber Feuchtigkeit wurde untersucht. Dabei gelang es den Einfluss der Feuchtigkeit auf die Lumineszenzeigenschaften und die Speziesverteilung durch die Oberflächenmodifikation zu verringern und die Lumineszenzeigenschaften teilweise zu konservieren. Im Fall der mesoporösen Silikamonolithe wurde auch eine heterogene Verteilung der Lanthanoidionen im Porensystem gefunden. Hier wechselwirkt ein Teil der Ionen mit der Porenwand, während sich die restlichen Ionen in der wäßrigen Phase innerhalb des Porensystems aufhalten. Das Aufbringen von Oberflächenmodifikationen führte zu einer Wechselwirkung der Ionen mit diesen Oberflächenmodifikationen, was sich in Abhängigkeit von der Oberflächenbeladung in den enstprechenden Lumineszenzeigenschaften niederschlug. N2 - Porous sol-gel materials are suitable for many applications and subject to ongoing research activities. This includes classical applications, e.g. as catalyst, molecular sieve or drying agent, as well as non-classical applications, e.g. as contrast agent in magnetic resonance tomography or in the form of thin zeolite films as isolators in microchips. The interest in porous materials also covers photonic applications as shown by the development of the zeolite-dye-microlaser. Zeolites, which belong to the subfamily of microporous materials, can be converted into luminescent materials using simple ion-exchange procedures. In addition to the creation of a luminescent material, which luminescence properties have to be characterized, the incorporation of lanthanide ions offers the possibility to use these ions as a luminescent probe for the characterization of the ion-host interactions. This is particularly interesting concerning the application of porous materials as catalysts. Therefor, the unique luminescence properties of the lanthanide ions europium(III) and terbium(III) are used. In this work lanthanide-doped microporous zeolites, microporous-mesoporous hybrid materials and mesoporous silicates were investigeted regarding their luminescence properties and the ion-host-interactions using time-resolved luminescence spectroscopy. Thereby, time-resolved emission spectra (TRES) provide information in the wavelength and time domain. For the analysis of the TRES a broad set of analytic methods was applied and thus a corresponding “toolbox“ developed. Fitting of the luminescence decays was performed with a discrete number of exponentials and supported by luminescence decay times distributions. Time-resolved area normalized emission spectra (TRANES), an advancement of TRES, could be used for the determination of the number of emissive lanthanide species in porous materials for the first time. Calculation of the decay-associated spectra (DAS) allowed the correlation of spectral information with luminescence decay times and thus delivered the luminescence spectra of the different europium species. For europium(III) we could use in addition the time-dependent asymmetry ratio and spectral evolution of the 5D0-7F0-transition with time to obtain further information about the distribution of the lanthanide ions in the host material. Luminescence decay times and spectra allowed conclusions on the number of OH-oscillators in and the symmetry of the first coordination sphere. For the microporous and microporous-mesoporous materials were found different lanthanide species, which were characterized by the above mentioned methods. These lanthanide species can be found on different positions in the host material. One position is located deep in the pore system. Here, lanthanide ions are hardly accessible for water and mainly coordinated by framework oxygens. This results in long luminescence decay times and distorted coordination spheres. The second position can be found near or on the outer surface or in the mesopores. Lanthanide ions located here, are easily accessible for water and thus show shorter luminescence decay times and a more symmetrical coordination sphere, which is mostly made up by water molecules. Another investigated aspect was the influence of surface modifications on the luminescence behavior of the lanthanide ions inside the material. Here we could show, that surface modifications hydrophobize the material and thus are able to protect the lanthanide ions from water, which is important for the conservation of the luminescence properties. Concerning the mesoporous silicates, again a heterogeneous distribution of the lanthanide ions in the pore system was found. A part of the lanthanide ions interacts with the pore wall, while the other part is located in the aqueous phase inside the pores. Surface modification led to a interaction of the lanthanide ions with the modification. This was reflected in the luminescence properties depending on the structure of the modification and the surface loading. KW - Lanthanoide KW - Lumineszenz KW - Zeolithe KW - TRES KW - TRANES KW - Lanthanides KW - Luminescence KW - Zeolites KW - TRES KW - TRANES Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-52371 ER - TY - THES A1 - Weiß, Jan T1 - Synthesis and self-assembly of multiple thermoresponsive amphiphilic block copolymers T1 - Synthese und Selbstorganisation von mehrfach thermisch schaltbaren amphiphilen Blockcopolymeren N2 - In the present thesis, the self-assembly of multi thermoresponsive block copolymers in dilute aqueous solution was investigated by a combination of turbidimetry, dynamic light scattering, TEM measurements, NMR as well as fluorescence spectroscopy. The successive conversion of such block copolymers from a hydrophilic into a hydrophobic state includes intermediate amphiphilic states with a variable hydrophilic-to-lipophilic balance. As a result, the self-organization is not following an all-or-none principle but a multistep aggregation in dilute solution was observed. The synthesis of double thermoresponsive diblock copolymers as well as triple thermoresponsive triblock copolymers was realized using twofold-TMS labeled RAFT agents which provide direct information about the average molar mass as well as residual end group functionality from a routine proton NMR spectrum. First a set of double thermosensitive diblock copolymers poly(N-n-propylacrylamide)-b-poly(N-ethylacrylamide) was synthesized which differed only in the relative size of the two blocks. Depending on the relative block lengths, different aggregation pathways were found. Furthermore, the complementary TMS-labeled end groups served as NMR-probes for the self-assembly of these diblock copolymers in dilute solution. Reversible, temperature sensitive peak splitting of the TMS-signals in NMR spectroscopy was indicative for the formation of mixed star-/flower-like micelles in some cases. Moreover, triple thermoresponsive triblock copolymers from poly(N-n-propylacrylamide) (A), poly(methoxydiethylene glycol acrylate) (B) and poly(N-ethylacrylamide) (C) were obtained from sequential RAFT polymerization in all possible block sequences (ABC, BAC, ACB). Their self-organization behavior in dilute aqueous solution was found to be rather complex and dependent on the positioning of the different blocks within the terpolymers. Especially the localization of the low-LCST block (A) had a large influence on the aggregation behavior. Above the first cloud point, aggregates were only observed when the A block was located at one terminus. Once placed in the middle, unimolecular micelles were observed which showed aggregation only above the second phase transition temperature of the B block. Carrier abilities of such triple thermosensitive triblock copolymers tested in fluorescence spectroscopy, using the solvatochromic dye Nile Red, suggested that the hydrophobic probe is less efficiently incorporated by the polymer with the BAC sequence as compared to ABC or ACB polymers above the first phase transition temperature. In addition, due to the problem of increasing loss of end group functionality during the subsequent polymerization steps, a novel concept for the one-step synthesis of multi thermoresponsive block copolymers was developed. This allowed to synthesize double thermoresponsive di- and triblock copolymers in a single polymerization step. The copolymerization of different N-substituted maleimides with a thermosensitive styrene derivative (4-vinylbenzyl methoxytetrakis(oxyethylene) ether) led to alternating copolymers with variable LCST. Consequently, an excess of this styrene-based monomer allowed the synthesis of double thermoresponsive tapered block copolymers in a single polymerization step. N2 - Die Selbstorganisation von mehrfach thermisch schaltbaren Blockcopolymeren in verdünnter wässriger Lösung wurde mittels Trübungsphotometer, dynamischer Lichtstreuung, TEM Messungen, NMR sowie Fluoreszenzspektroskopie untersucht. Die schrittweise Überführung eines hydrophilen in ein hydrophobes Blockcopolymer beinhaltet ein oder mehr amphiphile Zwischenstufen mit einstellbarem hydrophilen zu lipophilen Anteil (HLB). Dies führt dazu, dass die Selbstorganisation solcher Polymere in Lösung nicht nur einem Alles-oder-nichts-Prinzip folgt sondern ein mehrstufiges Aggregationsverhalten beobachtet wird. Die Synthese von doppelt thermisch schaltbaren Diblockcopolymeren und dreifach thermisch schaltbaren Triblockcopolymeren wurde durch sequenzielle RAFT Polymerisation realisiert. Dazu wurden zweifach TMS-markierte RAFT Agentien verwendet, welche die Bestimmung der molaren Masse sowie der verbliebenen Endgruppenfunktionalität direkt aus einem Protonen NMR Spektrum erlauben. Mit diesen RAFT Agentien wurde zunächst eine Serie von doppelt thermisch schaltbaren Diblockcopolymeren aus Poly(N-n-propylacrylamid)-b-Poly(N-ethylacrylamid), welche sich lediglich durch die relativen Blocklängen unterscheiden, hergestellt. In Abhängigkeit von der relativen Blocklänge wurde ein unterschiedliches Aggregationsverhalten der Diblockcopolymere in verdünnter wässriger Lösung beobachtet. Des Weiteren wirken die komplementär TMS-markierten Endgruppen als NMR-Sonden während der schrittweisen Aggregation dieser Polymere. Reversible, temperaturabhängige Peakaufspaltung der TMS-Signale in der NMR Spektroskopie spricht für eine Aggregation in gemischte stern-/blumenartige Mizellen, in denen ein Teil der hydrophoben Endgruppen in den hyrophoben Kern zurückfaltet. Obendrein wurden dreifach thermisch schaltbare Triblockcopolymere aus Poly(N-n-propylacrylamid) (A), Poly(methoxydiethylen glycol acrylat) (B) und Poly(N-ethylacrylamid) (C) in allen möglichen Blocksequenzen (ABC, BAC, ACB) durch schrittweisen Aufbau mittels RAFT Polymerisation erhalten. Das Aggregationsverhalten dieser Polymere in verdünnter wässriger Lösung war relativ komplex und hing stark von der Position der einzelnen Blöcke in den Triblockcopolymeren ab. Besonders die Position des Blocks mit der niedrigsten LCST (A) war ausschlaggebend für die resultierenden Aggregate. So wurde oberhalb der ersten Phasenübergangstemperatur nur Aggregation der Triblockcopolymere beobachtet, wenn der A Block an einem der beiden Enden der Polymere lokalisiert war. Wurde der A Block hingegen in der Mitte der Polymere positioniert, entstanden unimere Mizellen zwischen der ersten und zweiten Phasenübergangstemperatur, welche erst aggregierten, nachdem der zweite Block (B) seinen Phasenübergang durchlief. Die Transportereigenschaften dieser Triblockcopolymere wurden mittels Fluoreszenzspektroskopie getestet. Dazu wurde die Einlagerung eines hydrophoben, solvatochromen Fluoreszenzfarbstoffes, Nilrot, in Abhängigkeit der Temperatur untersucht. Im Gegensatz zu den Polymeren mit der Blocksequenz ABC oder ACB, zeigten die Polymere mit der Sequenz BAC eine verminderte Aufnahmefähigkeit des hydrophoben Farbstoffes oberhalb des ersten Phasenübergangs, was auf die fehlende Aggregation und die damit verbundenen relativ kleinen hydrophoben Domänen der unimolekularen Mizellen zwischen der ersten und zweiten Phasenübergangstemperatur zurückzuführen ist. Aufgrund des zunehmenden Verlustes von funktionellen Endgruppen während der RAFT Synthese von Triblockcopolymeren wurde ein neuartiges Konzept zur Einschrittsynthese von mehrfach schaltbaren Blockcopolymeren entwickelt. Dieses erlaubt die Synthese von mehrfach schaltbaren Diblock- und Triblockcopoylmeren in einem einzelnen Reaktionsschritt. Die Copolymeriation von verschiedenen N-substituierten Maleimiden mit einem thermisch schaltbaren Styrolderivat (4-Vinylbenzylmethoxytetrakis(oxyethylene) ether) ergab alternierende Copolymere mit variabler LCST. Die Verwendung eines Überschusses dieses styrolbasierten Monomers erlaubt ferner die Synthese von Gradientenblockcopolymeren in einem einzelnen Polymerisationsschritt. KW - Selbstorganisation KW - Blockcopolymer KW - RAFT KW - temperaturschaltbar KW - Mizelle KW - self-assembly KW - block copolymer KW - RAFT KW - thermoresponsive KW - micelle Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-53360 ER - TY - JOUR A1 - Bressel, Katharina A1 - Prevost, Sylvain A1 - Appavou, Marie-Sousai A1 - Tiersch, Brigitte A1 - Koetz, Joachim A1 - Gradzielski, Michael T1 - Phase behaviour and structure of zwitanionic mixtures of perfluorocarboxylates and tetradecyldimethylamine oxide-dependence on chain length of the perfluoro surfactant JF - Soft matter N2 - Phase behaviour and the mesoscopic structure of zwitanionic surfactant mixtures based on the zwitterionic tetradecyldimethylamine oxide (TDMAO) and anionic lithium perfluoroalkyl carboxylates have been investigated for various chain lengths of the perfluoro surfactant with an emphasis on spontaneously forming vesicles. These mixtures were studied at a constant total concentration of 50 mM and characterised by means of dynamic light scattering (DLS), electric conductivity, small-angle neutron scattering (SANS), viscosity, and cryo-scanning electron microscopy (Cryo-SEM). No vesicles are formed for relatively short perfluoro surfactants. The extension of the vesicle phase becomes substantially larger with increasing chain length of the perfluoro surfactant, while at the same time the size of these vesicles increases. Head group interactions in these systems play a central role in the ability to form vesicles, as already protonating 10 mol% of the TDMAO largely enhances the propensity for vesicle formation. The range of vesicle formation in the phase diagram is not only substantially enlarged but also extends to shorter perfluoro surfactants, where without protonation no vesicles would be formed. The size and polydispersity of the vesicles are related to the chain length of the perfluoro surfactant, the vesicles becoming smaller and more monodisperse with increasing perfluoro surfactant chain length. The ability of the mixed systems to form well-defined unilamellar vesicles accordingly can be controlled by the length of the alkyl chain of the perfluorinated surfactant and depends strongly on the charge conditions, which can be tuned easily by pH-variation. Y1 - 2011 U6 - https://doi.org/10.1039/c1sm05618b SN - 1744-683X VL - 7 IS - 23 SP - 11232 EP - 11242 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Wellert, Stefan A1 - Tiersch, Brigitte A1 - Koetz, Joachim A1 - Richardt, Andre A1 - Lapp, Alain A1 - Holderer, Olaf A1 - Gaeb, Juergen A1 - Blum, Marc-Michael A1 - Schulreich, Christoph A1 - Stehle, Ralf A1 - Hellweg, Thomas T1 - The DFPase from Loligo vulgaris in sugar surfactant-based bicontinuous microemulsions structure, dynamics, and enzyme activity JF - European biophysics journal : with biophysics letters ; an international journal of biophysics N2 - The enzyme diisopropyl fluorophosphatase (DFPase) from the squid Loligo vulgaris is of great interest because of its ability to catalyze the hydrolysis of highly toxic organophosphates. In this work, the enzyme structure in solution (native state) was studied by use of different scattering methods. The results are compared with those from hydrodynamic model calculations based on the DFPase crystal structure. Bicontinuous microemulsions made of sugar surfactants are discussed as host systems for the DFPase. The microemulsion remains stable in the presence of the enzyme, which is shown by means of scattering experiments. Moreover, activity assays reveal that the DFPase still has high activity in this complex reaction medium. To complement the scattering experiments cryo-SEM was also employed to study the microemulsion structure. KW - Dynamic light scattering KW - Neutron spin echo KW - Microemulsion KW - Enzyme catalysis KW - SANS KW - Protein structure Y1 - 2011 U6 - https://doi.org/10.1007/s00249-011-0689-0 SN - 0175-7571 VL - 40 IS - 6 SP - 761 EP - 774 PB - Springer CY - New York ER - TY - JOUR A1 - Weber, Nancy A1 - Tiersch, Brigitte A1 - Unterlass, Miriam M. A1 - Heilig, Anneliese A1 - Tauer, Klaus T1 - "Schizomorphic" Emulsion Copolymerization Particles JF - Macromolecular rapid communications N2 - Cryo-electron microscopy, atomic force microscopy, and light microscopy investigations provide experimental evidence that amphiphilic emulsion copolymerization particles change their morphology in dependence on concentration. The shape of the particles is spherical at solids content above 1%, but it changes to rod-like, ring-like, and web-like structures at lower concentrations. In addition, the shape and morphology of these particles at low concentrations are not fixed but very flexible and vary with time between spheres, flexible pearlnecklace structures, and stretched rods. KW - amphiphilic particles KW - emulsion polymerization KW - morphology Y1 - 2011 U6 - https://doi.org/10.1002/marc.201100491 SN - 1022-1336 VL - 32 IS - 23 SP - 1925 EP - 1929 PB - Wiley-Blackwell CY - Malden ER - TY - JOUR A1 - Koeth, Anja A1 - Appelhans, Dietmar A1 - Robertson, Daniela A1 - Tiersch, Brigitte A1 - Koetz, Joachim T1 - Use of weakly cationic dendritic glycopolymer for morphological transformation of phospholipid vesicles into tube-like networks JF - Soft matter N2 - Using cationic polyelectrolytes with different molecular architectures, only hyperbranched poly(ethyleneimine) with maltose shell is suited to tailor the morphological transformation of anionic vesicles into tube-like networks. The interaction features of those materials partly mimic biological features of tubular proteins in nature. Y1 - 2011 U6 - https://doi.org/10.1039/c1sm06439h SN - 1744-683X VL - 7 IS - 22 SP - 10581 EP - 10584 PB - Royal Society of Chemistry CY - Cambridge ER - TY - THES A1 - Pfeifer, Sebastian T1 - Neue Ansätze zur Monomersequenzkontrolle in synthetischen Polymeren T1 - New approaches for monomer sequence control in synthetic polymers N2 - Von der Natur geschaffene Polymere faszinieren Polymerforscher durch ihre spezielle auf eine bestimmte Aufgabe ausgerichtete Funktionalität. Diese ergibt sich aus ihrer Bausteinabfolge uber die Ausbildung von Uberstrukturen. Dazu zählen zum Beispiel Proteine (Eiweiße), aus deren Gestalt sich wichtige Eigenschaften ergeben. Diese Struktureigenschaftsbeziehung gilt ebenso für funktionelle synthetische Makromoleküle. Demzufolge kann die Kontrolle der Monomersequenz in Polymeren bedeutend für die resultierende Form des Polymermoleküls sein. Obwohl die Synthese von synthetischen Polymeren mit der Komplexität und der Größe von Proteinen in absehbarer Zeit wahrscheinlich nicht gelingen wird, können wir von der Natur lernen, um neuartige Polymermaterialien mit definierten Strukturen (Sequenzen) zu synthetisieren. Deshalb ist die Entwicklung neuer und besserer Techniken zur Strukturkontrolle von großem Interesse für die Synthese von Makromolekülen, die perfekt auf ihre Funktion zugeschnitten sind. Im Gegensatz zu der Anzahl fortgeschrittener Synthesestrategien zum Design aus- gefallener Polymerarchitekturen – wie zum Beispiel Sterne oder baumartige Polymere (Dendrimere) – gibt es vergleichsweise wenig Ansätze zur echten Sequenzkontrolle in synthetischen Polymeren. Diese Arbeit stellt zwei unterschiedliche Techniken vor, mit denen die Monomersequenz innerhalb eines Polymers kontrolliert werden kann. Gerade bei den großtechnisch bedeutsamen radikalischen Polymerisationen ist die Sequenzkontrolle schwierig, weil die chemischen Bausteine (Monomere) sehr reaktiv sind. Im ersten Teil dieser Arbeit werden die Eigenschaften zweier Monomere (Styrol und N-substituiertes Maleinimid) geschickt ausgenutzt, um in eine Styrolkette definierte und lokal scharf abgegrenzte Funktionssequenzen einzubauen. Uber eine kontrollierte radikalische Polymerisationsmethode (ATRP) wurden in einer Ein-Topf-Synthese über das N-substituierte Maleinimid chemische Funktionen an einer beliebigen Stelle der Polystyrolkette eingebaut. Es gelang ebenfalls, vier unterschiedliche Funktionen in einer vorgegebenen Sequenz in die Polymerkette einzubauen. Diese Technik wurde an zwanzig verschiedenen N-substituierten Maleinimiden getestet, die meisten konnten erfolgreich in die Polymerkette integriert werden. In dem zweiten in dieser Arbeit vorgestellten Ansatz zur Sequenzkontrolle, wurde der schrittweise Aufbau eines Oligomers aus hydrophoben und hydrophilen Segmenten (ω-Alkin-Carbonsäure bzw. α-Amin-ω-Azid-Oligoethylenglycol) an einem löslichen Polymerträger durchgeführt. Das Oligomer konnte durch die geschickte Auswahl der Verknüpfungsreaktionen ohne Schutzgruppenstrategie synthetisiert werden. Der lösliche Polymerträger aus Polystyrol wurde mittels ATRP selbst synthetisiert. Dazu wurde ein Startreagenz (Initiator) entwickelt, das in der Mitte einen säurelabilen Linker, auf der einen Seite die initiierende Einheit und auf der anderen die Ankergruppe für die Anbindung des ersten Segments trägt. Der lösliche Polymerträger ermöglichte einerseits die schrittweise Synthese in Lösung. Andererseits konnten überschüssige Reagenzien und Nebenprodukte zwischen den Reaktionsschritten durch Fällung in einem Nicht-Lösungsmittel einfach abgetrennt werden. Der Linker ermöglichte die Abtrennung des Oligomers aus jeweils drei hydrophoben und hydrophilen Einheiten nach der Synthese. N2 - Polymer scientists are impressed by polymers created by nature. This is caused by their structure which is aimed to fulfill very special functions. The structure is primary built by sequential covalent linking of building units. Secondly, supramolecular aggregation leads to three-dimensional alignment. The sequence of the building blocks has a high influence on the higher molecular arrangement. Proteins are only one example for supramolecular structures which have special functions because of their supramolecular arrangement. This structure-property relationship is also possible for synthetic polymers. For this reason the control of monomer sequences in synthtic polymers is just as important for the resulting structure of a synthetic polymer molecule. Even though the synthesis of polymers with complex strucures and sizes as in nature is impossible in near future. But the development of new and better techniques for sequence control in synthetic polymers is of high importance to create well defined macromolecular structures which are tailor-made for their function. In contrast to a lot of advanced synthethis strategies for the design of complex polymer architechtures (e.g. brushes, stars, or dendrimers) their are less approaches for a monomer sequence control in synthetic polymers. This work presents two different techniques for controlling the monomer sequence inside a polymer. Especially in technologically significant radical polymerization it is difficult to control the monomer sequence because radical species are very reactive and the addition of a monomer to the radical function is not selective. The first approach makes use of the properties of two monomers (styrene and N-substituted maleimides) to add chemical funtions locally inside a polystyrene chain. By addition of N-functionalized maleimides during the polymerization of styrene chemical functions could be added at any desired position inside the polystyrene chain. This technique was tested on 20 different N-substituted maleimides. Most of them were incorporated successfully into the polymer chain. The second monomer sequence control approach is a stepwise synthesis of an oligomer made of short alternating hydrophobic and hydrophilic segments on a soluble polymer support. Two building blocks were used: ω-alkyne carboxylic acid (A-B) and α-amine-ω-azide oligoethylene glycol (C-D). The linking of the segments was done by applying two very efficient chemical reactions, namely 1,3-dipolar cycloaddition of terminal alkynes (A) and azides (D) and amidification of carboxylic acids (B) with primary amines (C). These two reactions proceed chemoselectively in an ABCD multifunctional mixture without a protection chemistry strategy. The polystyrene support was synthesized by atom transfer radical polymerization (ATRP) in the presence of an azido-functionalized ATRP initiator containing a labile p-alkoxybenzyl ester linker. Depending on the choise of solvent, the soluble polymer support was used in solution during the coupling reactions or was precipitated for an easy removal of excessive reagents and by-products. The acid-labile linker could be cleaved by trifluoroacetic acid treatment to obtain a hydrophilic/hydrophobic block copolymer. KW - ATRP KW - Copolymerisation KW - Flüssigphasensynthese KW - WANG-Linker KW - Klick-Chemie KW - ATRP KW - copolymerization KW - liquid phase synthesis KW - WANG-linker KW - click chemistry Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-51385 ER - TY - THES A1 - Valverde Serrano, Clara T1 - Self-assembly behavior in hydrophilic block copolymers T1 - Selbstorganisation von hydrophilen Blockcopolymeren N2 - Block copolymers are receiving increasing attention in the literature. Reports on amphiphilic block copolymers have now established the basis of their self-assembly behavior: aggregate sizes, morphologies and stability can be explained from the absolute and relative block lengths, the nature of the blocks, the architecture and also solvent selectiveness. In water, self-assembly of amphiphilic block copolymers is assumed to be driven by the hydrophobic. The motivation of this thesis is to study the influence on the self-assembly in water of A b B type block copolymers (with A hydrophilic) of the variation of the hydrophilicity of B from non-soluble (hydrophobic) to totally soluble (hydrophilic). Glucose-modified polybutadiene-block-poly(N-isopropylacrylamide) copolymers were prepared and their self-assembly behavior in water studied. The copolymers formed vesicles with an asymmetric membrane with a glycosylated exterior and poly(N-isopropylacrylamide) on the inside. Above the low critical solution temperature (LCST) of poly(N-isopropylacrylamide), the structure collapsed into micelles with a hydrophobic PNIPAM core and glycosylated exterior. This collapse was found to be reversible. As a result, the structures showed a temperature-dependent interaction with L-lectin proteins and were shown to be able to encapsulate organic molecules. Several families of double hydrophilic block copolymers (DHBC) were prepared. The blocks of these copolymers were biopolymers or polymer chimeras used in aqueous two-phase partition systems. Copolymers based on dextran and poly(ethylene glycol) blocks were able to form aggregates in water. Dex6500-b-PEG5500 copolymer spontaneously formed vesicles with PEG as the “less hydrophilic” barrier and dextran as the solubilizing block. The aggregates were found to be insensitive to the polymer's architecture and concentration (in the dilute range) and only mildly sensitive to temperature. Variation of the block length, yielded different morphologies. A longer PEG chain seemed to promote more curved aggregates following the inverse trend usually observed in amphiphilic block copolymers. A shorter dextran promoted vesicular structures as usually observed for the amphiphilic counterparts. The linking function was shown to have an influence of the morphology but not on the self-assembly capability in itself. The vesicles formed by dex6500-b-PEG5500 showed slow kinetics of clustering in the presence of Con A lectin. In addition both dex6500-b-PEG5500 and its crosslinked derivative were able to encapsulate fluorescent dyes. Two additional dextran-based copolymers were synthesized, dextran-b-poly(vinyl alcohol) and dextran-b-poly(vinyl pyrrolidone). The study of their self-assembly allowed to conclude that aqueous two-phase systems (ATPS) is a valid source of inspiration to conceive DHBCs capable of self-assembling. In the second part the principle was extended to polypeptide systems with the synthesis of a poly(N-hydroxyethylglutamine)-block-poly(ethylene glycol) copolymer. The copolymer that had been previously reported to have emulsifying properties was able to form vesicles by direct dissolution of the solid in water. Last, a series of thermoresponsive copolymers were prepared, dextran-b-PNIPAMm. These polymers formed aggregates below the LCST. Their structure could not be unambiguously elucidated but seemed to correspond to vesicles. Above the LCST, the collapse of the PNIPAM chains induced the formation of stable objects of several hundreds of nanometers in radius that evolved with increasing temperature. The cooling of these solution below LCST restored the initial aggregates. This self-assembly of DHBC outside any stimuli of pH, ionic strength, or temperature has only rarely been described in the literature. This work constituted the first formal attempt to frame the phenomenon. Two reasons were accounted for the self-assembly of such systems: incompatibility of the polymer pairs forming the two blocks (enthalpic) and a considerable solubility difference (enthalpic and entropic). The entropic contribution to the positive Gibbs free energy of mixing is believed to arise from the same loss of conformational entropy that is responsible for “the hydrophobic effect” but driven by a competition for water of the two blocks. In that sense this phenomenon should be described as the “hydrophilic effect”. N2 - Blockcopolymere erfahren ein stetig wachsendes Interesse, was an der steigenden Anzahl an Publikationen zu diesem Thema erkennbar ist. Zahlreiche Studien zu amphiphilen Blockcopolymeren haben dabei einige grundlegende Erkenntnisse über deren chemisches und physikalisches Verhalten, vor allem über die Selbstorganisation, hervorgebracht. So können die Größe, die verschiedenen Morphologien und auch die Stabilität der gebildeten Aggregate anhand der relativen und absoluten Blocklängen, die chemischen Struktur der Blöcke, der molekularen Architektur und der Eigenschaften des verwendeten Lösungsmittel erklärt werden. Im speziellen Fall des Wassers als Lösungsmittel bist die Selbstorganisation amphiphiler Blockcopolymere durch den hydrophoben Effekt bedingt. Dieser Arbeit liegt das Interesse an der Selbstorganisation in wässrigem Medium von Blockcopolymeren des Typs A-b-B mit A als hydrophilem Block und B als Block mit variierender Hydrophilie bzw. Hydrophpobie von unlöslich bis vollständig löslich zugrunde. Durch Variation dieser Eigenschaften von Block B soll dessen Einfluss auf das Selbstorganisationsverhalten untersucht werden. Dazu wurden mit Glucose modifizierte Polybutadien-block-Poly(N-Isopropylacrylamid)-Copolymere hergestellt und deren Selbstorganisation in Wasser untersucht. Die Copolymere bilden Vesikel mit einer asymmetrischen Membran, wobei im äußeren Bereich glycolysierte Gruppen und im inneren Bereich Poly(N-Isopropylacrylamid) (PNIPAM) vorliegen. Beim Überschreiten der low critical solution temperature (LCST) kollabiert die vesikuläre Struktur unter Bildung von Mizellen mit einem hydrophoben PNIPAM-Mizellinneren und nach außen gerichteten glycolysierten Blöcken. Diese strukturelle Umwandlung ist reversibel. Die Strukturen zeigten außerdem eine temperaturabhängige Wechselwirkung mit L-Lectin-Proteinen und die Möglichkeit zur Einkapselung organischer Moleküle konnte belegt werden. Des weiteren wurden verschiedene Gruppen von Blockcopolymeren mit zwei hydrophilen Blöcken synthetisiert (double hydrophilic block copolymers – DHBC). Die Blöcke dieser Systeme waren entweder Biopolymere oder Polymerchimäre, die in wässrigen Zwei-Phasen-Trennverfahren eingesetzt werden. Polymere, die auf Dextran- und Poly(ethylenglycol)-Blöcken basieren, zeigen Aggregatbildung in wässriger Phase. Dex6500-b-PEG5500 bildet spontan Vesikel mit PEG als „weniger hydrophilem“ Bestandteil und Dextran als löslichem Block. Die Bildung dieser Vesikel zeigte keine Emfpindlichkeit gegenüber einer Veränderung der Polymerarchitektur und der Konzentration, und nur eine geringe Sensitivität gegenüber Temperaturänderungen. Veränderungen der Blocklängen dagegen beeinflussten die Selbstorganisation und führten zu unterschiedlichen Morphologien. Längere PEG-Blöcke bevorzugten dabei die Bildung eher gekrümmter Aggregate, entgegen dem Trend, der gewöhnlicherweise für amphiphile Blockcopolymere beobachtet wird. Die Verkürzung des Dextran-Blocks fördert die Ausbildung vesikulärer Strukturen, was dem Verhalten der amphiphilen Gegenspieler der DHBC-Systeme entspricht. Die funktionelle Gruppe zur Verbindung der beiden Blöcke hat zwar einen Einfluss auf die Morphologie der gebildeten Aggregate, nicht jedoch auf die eigentliche Fähigkeit der Systeme zur Selbstorganisation. Die Dex6500-b-PEG5500-Vesikel wiesen zudem eine langsame Bildungskinetik in Gegenwart von Con-A-Lectin auf. Des Weiteren waren sowohl Dex6500-b-PEG5500 als auch das quervernetzte Derivate dieses Copolymers in der Lage, Fluoreszenzfarbstoffe einzulagern. Um zu zeigen, dass wässrige Zwei-Phasen-Systeme (aqueous two phase systems – ATPS) eine belastbare Grundlage für die Untersuchung und Entwicklung selbstorganisierender DHBC-Systeme sind, wurden weitere Dextran-basierte Copolymere synthetsisiert: Dextran-b-Poly(vinylalokohol) und Detran-b-Poly(vinylpyrrolidon). In einem zweiten Teil dieser Arbeit wurde das zuvor erarbeitete Prinzip auf auf Polypeptidsysteme ausgeweitet. Dazu wurde ein Poly(N-Hydroxyethylglutamin)-block-Poly(ethylenglycol)-Copolymer hergestellt. Dieses Copolymer, dessen emulgierenden Eigenschaften bereits bekannt waren, wies unmittelbar nach Lösung des Feststoffes in Wasser Vesikelbildung auf. In einem dritten Teil der Studie wurden thermoresponsive Copolymere hergestellt und untersucht: Dextran-b-PNIPAMm. Unterhalb der LCST konnte die Bildung von Aggregaten nachgewiesen werden, deren Struktur nicht zweifelsfrei entschlüsselt werden konnte, wobei jedoch zahlreiche Hinweise auf eine vesikuläre Struktur hindeuten. Oberhalb der LCST wurde durch die Kollabierung der PNIPAM-Ketten die Bildung stabiler Strukturen mit Radien von mehreren hundert Nanometern induziert, deren weitere Entwicklung durch eine weitere Temperaturerhöhung gefördert werden konnte. Durch Rückkühlung in den Temperaturebereich unterhalb der LCST konnten die zuvor beobachteten Aggregate reversibel zurückgebildet werden. Das Selbstorganisationsverhalten von DHBC, unabhängig vom Einfluss des pH-Werts, der Ionenstärke oder der Temperatur are bisher nur in sehr geringem Umfang Gegenstand wissenschaftlicher Veröffentlichungen. Diese Arbeit stellt damit den ersten umfassenden Beitrag zur systematischen Erarbeitung dieses Phänomens dar. Es konnten dabei zwei Ursachen für die beobachteten Selbstorganisationseffekte bestimmt werden: die Inkompatibilität der beiden Polymerblöcke (enthalpischer Effekt) und der Unterschied in deren Löslichkeit (enthalpische und entropische Effekte). Der entropische Beitrag zur positiven Gibbs’schen Freien Mischungsenergie wird dem selben Verlust konformativer Entropie zugeordnet, der auch für den hydrophoben Effekt verantwortlich ist, allerdings angetrieben durch einen Wettbewerb der beiden Polymerblöcke um das Wasser. In diesem Sinne kann man das beobachtete Phänomen als „hydrophilen Effekt“ bezeichnen. KW - Selbstorganisation KW - Blockcopolymere KW - hydrophil KW - self-assembly KW - copolymers KW - hydrophilic Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-54163 ER - TY - THES A1 - Jiang, Yuan T1 - Precursor phases in non-classical crystallization N2 - The main objective of this thesis is to understand molecular crystallization as a multistep process with or without polymeric additives, including transient liquid-liquid phase separation, nanocrystal nucleation within the dense phase, and subsequent nanocrystal self-assembly or self-organization in sequence. The thesis starts with a quaternary model system, containing DL-Glutamic acid (Glu), polyethyleneimine (PEI), water, and EtOH, for the understanding of multistep precipitation of Glu with PEI as an additive. The experiments were performed by mixing Glu-PEI aqueous solution with a non-solvent EtOH. First, the phase diagram of the quaternary system is determined, obtaining precipitate, coacervates, or homogeneous mixtures by varying Glu/PEI w/w and water/EtOH v/v. Coacervation is observed to occur over a wide range of Glu/PEI with various volumes. The composition of coacervates is conveniently characterized by nuclear magnetic resonance spectroscopy. The observed coacervates are thermodynamically stable phases rich in solute, which is different from metastable polymer-induced liquid precursors. The combination of atomic force microscopy, small angle scattering, and ξ-potential measurements confirms the coexistence of monomers and Glu/PEI complexes and the aggregation of complexes in Glu-PEI-water systems. This suggests that there might be a direct structural transformation between the Glu-PEI complexes in aqueous solution and the metastable liquid precursors in a water-EtOH mixture. The multistep mechanism of Glu precipitation with PEI as an additive is investigated thereafter. The combination of stopped flow and small angle scattering demonstrates that the initially formed liquid precursors pass through an alteration of growth and coalescence. Combined with results from optical microscopy and scanning electron microscopy, the nucleation of nanoplatelets happens within each liquid precursor droplet, and nanoplatelets reorient themselves and self-organize into a radial orientation in the crystalline microspheres. The recipe was then extended to the precipitation of organics in other oppositely charged amino acid-polyelectrolyte systems. After the success in preparing hierarchical microspheres in solution, the similar recipe can be extended to the preparation of patterned thin films on substrate. By dipping a quaternary DL-Lys·HCl (Lys)–polyacrylic acid (PAA)–water–EtOH dispersion on a hydrophilic slide, the fast evaporation process of the volatile solvent EtOH is responsible for the homogeneous nucleation of NPs. Then, the following complete evaporation causes the mesocrystallization of a continuous spherulitic thin film along the receding line of the liquid, which again transforms into a mesocrystalline thin film. Furthermore, annealing is used to optimize the property of mesocrystalline thin films. As evaporation is a non-equilibrium process, it can be used to tune the kinetics of crystallization. Therefore, hierarchical or periodical thin films are obtainable by starting the evaporation from microspheres recrystallization, obtaining mesocrystalline thin films with 4 hierarchy levels. The results reveal that evaporation provides an easy but effective way for the formation of patterned structures via the positioning of NPs after their fast nucleation, resulting in different kinds of patterns by controlling the concentration of NPs, solvent evaporation rate, and other physical forces. Non-classical crystallization is not limited to crystallizations with polymeric additives. We also observed the nucleation and growth of a new molecular layer on the growing DL-Glu·H2O crystals from a supersaturated mother liquor by using an in-situ atomic force microscopy (AFM), where the nucleation and growth of a molecular layer proceed via amorphous nanoparticle (NP) attachment and relaxation process before the observation of the growth of a newly formed molecular layer. NP attachment to the crystal surface is too fast to observe by using in-situ AFM. The height shrinkage of NPs, combined to the structural transformation from 3D amorphous NPs to 2D crystalline layer, is observed during the relaxation process. The nucleation and growth of a newly formed molecular layer from NP relaxation is contradictory to the classical nucleation theory, which hypothesizes that nuclei show the same crystallographic properties as a bulk crystal. The formation of a molecular layer by NP attachment and relaxation rather than attachment of single molecules provides a different picture from the currently held classical nucleation and growth theory regarding the growth of single crystals from solution. N2 - Das Hauptziel dieser Arbeit ist das Verständnis der molekularen Kristallisation, sowohl mit als auch ohne polymere Additive, als einen mehrstufigen Prozess. Dieser beinhaltet eine transiente flüssig-flüssig Phasentrennung, die Nukleation von Nanokristallen in der dichten flüssigen Precursor-Phase so wie eine anschließende nanokristalline Selbstorganisation. Die Arbeit beginnt mit Untersuchungen an einem quaternären Modelsystem bestehend aus DL-Glutamat (Glu), Polyethylenimin (PEI), Wasser und Ethanol. Das Phasendiagramm dieses quaternären Systems wird durch Variation der Glu/PEI w/w und Wasser/EtOH v/v Verhältnisse bestimmt, wobei Präzpitat aus polymerinduzierten flüssigen Precursor, Koazervate oder homogene Mischungen erhalten werden Das thermodynamisch stabile Koazervat kann als Referenz für das Verständnis von flüssigen Precursorn angesehen werden, welche in der Natur metastabil und transient sind. Der mehrstufige Mechanismus der Glu-Präzipitation mit PEI als Additiv wird dann mittels Neutronen Kleinwinkelstreuung untersucht. Dies zeigt, dass die ursprünglich gebildeten flüssigen Precursor noch vor der Nukleation von Nanokristallen einen Wechsel von Wachstum und Koaleszenz durchlaufen. Die Ergebnisse aus optischer- und Eletronenmikroskopie zeigen, dass sowohl die flüssigen Precursor Superstrukturen ausbilden als auch, dass die Nukleation von Nanoplättchen in jedem einzelnen Precursor Tropfen von statten geht. Dies geschieht noch bevor sich die Nanoplättchen selbst in einer radialen Orientierung ausrichten. Diese Studie liefert die Kinetik der Präzipitation von organischen Stoffen in Gegenwart von polymeren Additiven. Eine ähnliche Vorgehensweise wie für die Herstellung von Mikrokügelchen kann für die Darstellung von gemusterten Filmen angewandt werden. Die homogene Nukleation von Nanopartikeln (NPs) findet während der Verdampfung einer quarternären DL-Lys·HCl-Polyacrylsäure-Wasser-Ethanol Dispersion auf einer hydrophilen Oberfläche statt. Die darauffolgende vollständige Verdampfung löst die Mesokristallisation eines kontinuierlichen sphärolithischen dünnen Films aus, welcher sich wiederum in einen mesokristallinen dünnen Film umwandelt. Mesokristalline Filme mit 4 Hierarchiestufen bzw. auch periodische Filme werden durch die Verdampfung der Mikrokügelchen-Dispersion erhalten. Die Ergebnisse zeigen, dass die Verdampfung eine einfache aber effektive Methode zur Herstellung von verschieden gemusterten hierarchischen Filmen darstellt. Nicht-klassische Kristallisation wird auch in der Abwesenheit von polymeren Additiven beobachtet. Wir verfolgen mittels Rasterkraftmikroskop (AFM) die Nukleation und das Wachstum einer neuen molekularen Schicht auf wachsenden DL-Glu·H2O Kristallen aus übersättigter Mutterlauge. Die Bildung einer neuen molekularen Schicht verläuft durch die Anlagerung von amorphen Nanopartikeln. Das Schrumpfen der NPs zusammen mit der strukturellen Änderung von dreidimensionalen NPs zu 2D Schichten wird während dieses Relaxationsprozesses beobachtet. Schließlich kommt es zu der Ausbildung einer neuen molekularen Schicht. Die Bildung einer molekularen Schicht durch die Anlagerung von Nanopartikeln aus der Lösung und die darauffolgende Relaxation liefert ein abweichendes Bild zu der bisher gängigen klassischen Theorie des Kristallwachstums. T2 - Vorstufenphasen in nichtklassischer Kristallisation KW - Mesokristall KW - Vorstufe KW - Kristallisation KW - mesocrystal KW - precursor KW - crystallization Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-52460 ER - TY - THES A1 - Kraupner, Alexander T1 - Neuartige Synthese magnetischer Nanostrukturen: Metallcarbide und Metallnitride der Übergangsmetalle Fe/Co/Ni T1 - Novel synthesis of magnetic nanostructures: metal carbides and metal nitrides of transition metals Fe/Co/Ni N2 - Magnetische Nanopartikel bieten ein großes Potential, da sie einerseits die Eigenschaften ihrer Bulk-Materialien besitzen und anderseits, auf Grund ihrer Größe, über komplett unterschiedliche magnetische Eigenschaften verfügen können; Superparamagnetismus ist eine dieser Eigenschaften. Die meisten etablierten Anwendungen magnetischer Nanopartikel basieren heutzutage auf Eisenoxiden. Diese bieten gute magnetische Eigenschaften, sind chemisch relativ stabil, ungiftig und lassen sich auf vielen Synthesewegen relativ einfach herstellen. Die magnetischen Eigenschaften der Eisenoxide sind materialabhängig aber begrenzt, weshalb nach anderen Verbindungen mit besseren Eigenschaften gesucht werden muss. Eisencarbid (Fe3C) kann eine dieser Verbindungen sein. Dieses besitzt vergleichbare positive Eigenschaften wie Eisenoxid, jedoch viel bessere magnetische Eigenschaften, speziell eine höhere Sättigungsmagnetisierung. Bis jetzt wurde Fe3C hauptsächlich in Gasphasenabscheidungsprozessen synthetisiert oder als Nebenprodukt bei der Synthese von Kohlenstoffstrukturen gefunden. Eine Methode, mit der gezielt Fe3C-Nanopartikel und andere Metallcarbide synthetisiert werden können, ist die „Harnstoff-Glas-Route“. Neben den Metallcarbiden können mit dieser Methode auch die entsprechenden Metallnitride synthetisiert werden, was die breite Anwendbarkeit der Methode unterstreicht. Die „Harnstoff-Glas-Route“ ist eine Kombination eines Sol-Gel-Prozesses mit einer anschließenden carbothermalen Reduktion/Nitridierung bei höheren Temperaturen. Sie bietet den Vorteil einer einfachen und schnellen Synthese verschiedener Metallcarbide/nitride. Der Schwerpunkt in dieser Arbeit lag auf der Synthese von Eisencarbiden/nitriden, aber auch Nickel und Kobalt wurden betrachtet. Durch die Variation der Syntheseparameter konnten verschiedene Eisencarbid/nitrid Nanostrukturen synthetisiert werden. Fe3C-Nanopartikel im Größenbereich von d = 5 – 10 nm konnten, durch die Verwendung von Eisenchlorid, hergestellt werden. Die Nanopartikel weisen durch ihre geringe Größe superparamagnetische Eigenschaften auf und besitzen, im Vergleich zu Eisenoxid Nanopartikeln im gleichen Größenbereich, eine höhere Sättigungsmagnetisierung. Diese konnten in fortführenden Experimenten erfolgreich in ionischen Flüssigkeiten und durch ein Polymer-Coating, im wässrigen Medium, dispergiert werden. Desweiteren wurde durch ein Templatieren mit kolloidalem Silika eine mesoporöse Fe3C-Nanostruktur hergestellt. Diese konnte erfolgreich in der katalytischen Spaltung von Ammoniak getestet werden. Mit der Verwendung von Eisenacetylacetonat konnten neben Fe3C-Nanopartikeln, nur durch Variation der Reaktionsparameter, auch Fe7C3- und Fe3N-Nanopartikel synthetisiert werden. Speziell für die Fe3C-Nanopartikel konnte die Sättigungsmagnetisierung, im Vergleich zu den mit Eisenchlorid synthetisierten Nanopartikeln, nochmals erhöht werden. Versuche mit Nickelacetat führten zu Nickelnitrid (Ni3N) Nanokristallen. Eine zusätzliche metallische Nickelphase führte zu einer Selbstorganisation der Partikel in Scheiben-ähnliche Überstrukturen. Mittels Kobaltacetat konnten, in Sphären aggregierte, metallische Kobalt Nanopartikel synthetisiert werden. Kobaltcarbid/nitrid war mit den gegebenen Syntheseparametern nicht zugänglich. N2 - Magnetic nanoparticles offer a great potential, because they exhibit on the one hand the properties of their bulk materials and on the other hand, because of their size, completely different magnetic properties. The most established applications of magnetic nanoparticles are based on iron oxide. These oxides have good magnetic properties, they are chemical relatively stable, non toxic and easy to prepare. But the magnetic properties are limited. Therefore, we need new materials with improved magnetic properties. Iron carbide (Fe3C) could be one of these materials. Up to now, Fe3C was mainly synthesized in chemical vapor deposition processes (CVD) or was found as side product in the synthesis of carbon structures. A method for the systematical synthesis of metal carbides is the “Urea-Glass-Route”. In addition to the synthesis of metal carbides, this method allows to synthesize metal nitrides, which shows the broad practicability. The “Urea-Glass-Route” is a combination of a sol-gel process with following carbothermal reduction/nitridation at higher temperatures. The method is fast and simple and it is possible to synthesis different metal carbides/nitrides. The main topic of this work is the synthesis of iron carbide/nitride, but also cobalt and nickel is examined. By varying the synthesis parameters, different iron carbide/nitride nanostructures could be synthesized. With the use of iron chloride, Fe3C nanoparticles, in the size range of d = 5 – 10 nm, could be produced. Because of their small size, the particles show superparamagnetism and compared to iron oxide particles (in the same size range) a higher saturation magnetization. In following experiments, the particles could be successfully dispersed in an ionic liquid and with a polymer coating in aqueous medium. Furthermore, via templating with colloidal silica a mesoporous Fe3C structure could be synthesized. The material could be successfully tested in the catalytic ammonia decomposition. By changing the iron source to iron acetylacetonate, Fe7C3 and Fe3N nanoparticles, in addition to Fe3C, could be also synthesized. With nickel acetate it was possible to synthesize nickel nitride (Ni3N) nano crystals. An additional metallic nickel phase in the sample leads to a self organization to disk-like superlattice. Via cobalt acetate, in spheres aggregated, metallic cobalt nanoparticles could be synthesized. Cobalt carbide or nitride was not accessible under these synthesis parameters. KW - Carbide KW - Nitride KW - Eisen KW - Magnetismus KW - Nanopartikel KW - carbides KW - nitrides KW - iron KW - magnetism KW - nanoparticles Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-52314 ER - TY - THES A1 - Kopetzki, Daniel T1 - Exploring hydrothermal reactions : from prebiotic synthesis to green chemistry T1 - Hydrothermalreaktionen : von präbiotischer Synthese zu nachhaltiger Chemie N2 - In this thesis chemical reactions under hydrothermal conditions were explored, whereby emphasis was put on green chemistry. Water at high temperature and pressure acts as a benign solvent. Motivation to work under hydrothermal conditions was well-founded in the tunability of physicochemical properties with temperature, e.g. of dielectric constant, density or ion product, which often resulted in surprising reactivity. Another cornerstone was the implementation of the principles of green chemistry. Besides the use of water as solvent, this included the employment of a sustainable feedstock and the sensible use of resources by minimizing waste and harmful intermediates and additives. To evaluate the feasibility of hydrothermal conditions for chemical synthesis, exemplary reactions were performed. These were carried out in a continuous flow reactor, allowing for precise control of reaction conditions and kinetics measurements. In most experiments a temperature of 200 °C in combination with a pressure of 100 bar was chosen. In some cases the temperature was even raised to 300 °C. Water in this subcritical range can also be found in nature at hydrothermal vents on the ocean floor. On the primitive earth, environments with such conditions were however present in larger numbers. Therefore we tested whether biologically important carbohydrates could be formed at high temperature from the simple, probably prebiotic precursor formaldehyde. Indeed, this formose reaction could be carried out successfully, although the yield was lower compared to the counterpart reaction under ambient conditions. However, striking differences regarding selectivity and necessary catalysts were observed. At moderate temperatures bases and catalytically active cations like Ca2+ are necessary and the main products are hexoses and pentoses, which accumulate due to their higher stability. In contrast, in high-temperature water no catalyst was necessary but a slightly alkaline solution was sufficient. Hexoses were only formed in negligible amounts, whereas pentoses and the shorter carbohydrates accounted for the major fraction. Amongst the pentoses there was some preference for the formation of ribose. Even deoxy sugars could be detected in traces. The observation that catalysts can be avoided was successfully transferred to another reaction. In a green chemistry approach platform chemicals must be produced from sustainable resources. Carbohydrates can for instance be employed as a basis. They can be transformed to levulinic acid and formic acid, which can both react via a transfer hydrogenation to the green solvent and biofuel gamma-valerolactone. This second reaction usually requires catalysis by Ru or Pd, which are neither sustainable nor low-priced. Under hydrothermal conditions these heavy metals could be avoided and replaced by cheap salts, taking advantage of the temperature dependence of the acid dissociation constant. Simple sulfate was recognized as a temperature switchable base. With this additive high yield could be achieved by simultaneous prevention of waste. In contrast to conventional bases, which create salt upon neutralization, a temperature switchable base becomes neutral again when cooled down and thus can be reused. This adds another sustainable feature to the high atom economy of the presented hydrothermal synthesis. In a last study complex decomposition pathways of biomass were investigated. Gas chromatography in conjunction with mass spectroscopy has proven to be a powerful tool for the identification of unknowns. It was observed that several acids were formed when carbohydrates were treated with bases at high temperature. This procedure was also applied to digest wood. Afterwards it was possible to fermentate the solution and a good yield of methane was obtained. This has to be regarded in the light of the fact that wood practically cannot be used as a feedstock in a biogas factory. Thus the hydrothermal pretreatment is an efficient means to employ such materials as well. Also the reaction network of the hydrothermal decomposition of glycine was investigated using isotope-labeled compounds as comparison for the unambiguous identification of unknowns. This refined analysis allowed the identification of several new molecules and pathways, not yet described in literature. In summary several advantages could be taken from synthesis in high-temperature water. Many catalysts, absolutely necessary under ambient conditions, could either be completely avoided or replaced by cheap, sustainable alternatives. In this respect water is not only a green solvent, but helps to prevent waste and preserves resources. N2 - In dieser Arbeit wurden chemische Reaktionen unter Hydrothermalbedingungen untersucht. Darunter versteht man Wasser als Reaktionsmedium, welches eine Temperatur über 100 °C aufweist. Der flüssige Zustand wird dabei durch erhöhten Druck aufrecht erhalten. Typischerweise wurden die Reaktionen bei 200 °C und einem Druck von 100 bar durchgeführt, also dem 100-fachen des Normaldrucks. Dieses System kann man auch mit einem Dampfdrucktopf vergleichen, wobei durch die erhöhten Temperaturen chemische Reaktionen sehr schnell ablaufen und überraschende Reaktivität auftritt. Die Motivation, Wasser als Lösemittel zu benutzen, ist auch in seiner Umweltfreundlichkeit gegenüber klassischen organischen Lösemitteln begründet. Da solche Hydrothermalbedingungen auf der frühen Erde häufiger anzutreffen waren, wurde untersucht, ob wichtige Biomoleküle bei solch hoher Temperatur gebildet werden können. In der Tat konnten Zucker aus der sehr einfachen Verbindung Formaldehyd synthetisiert werden. Hierzu war lediglich eine leicht basische Lösung nötig und keine der bei moderaten Temperaturen essentiellen Katalysatoren. Zucker stellen zudem den größten Teil der pflanzlichen Biomasse dar und können daher als Grundlage für eine nachhaltige Chemie dienen. Sie können relativ einfach zu Lävulin- und Ameisensäure umgesetzt werden. Aus diesen wiederum kann die wichtige Basischemikalie gamma-Valerolacton hergestellt werden. Der Schlüsselschritt, die Reduktion von Lävulinsäure, erforderte bisher die Zuhilfenahme seltener Edelmetalle wie Ruthenium. Es konnte nun gezeigt werden, dass unter Hydrothermalbedingungen diese Rolle von einfachen Salzen, z. B. Natriumsulfat, übernommen werden kann. Hierbei macht man sich zunutze, dass sie nur bei hoher Temperatur basisch wirken, nicht aber wenn die Lösung wieder abgekühlt ist. Neben Kohlenhydraten besteht Biomasse auch aus Aminosäuren, von denen Glycin die einfachste darstellt. Unter Abspaltung von CO2 können aus ihnen synthetisch wichtige Amine hergestellt werden. Diese Reaktion findet unter Hydrothermalbedingungen statt, daneben treten jedoch noch andere Produkte auf. Unbekannte Verbindungen wurden mittels Massenspektroskopie identifiziert, wobei die Masse des Moleküls und bestimmter Molekülfragmente bestimmt wurde. Dies erlaubte es, bisher noch unbekannte Reaktionswege aufzuklären. Zusammenfassend lässt sich sagen, dass Wasser unter Hydrothermalbedingungen eine interessante Alternative zu organischen Lösemitteln darstellt. Desweiteren können bestimmte Katalysatoren, die bei moderaten Temperaturen nötig sind, entweder vollständig eingespart oder ersetzt werden. In dieser Hinsicht ist Wasser nicht nur ein umweltfreundliches Lösemittel, sondern trägt dazu bei, Abfall zu vermeiden und Ressourcen zu schonen. KW - hydrothermal KW - Formose KW - Valerolacton KW - Lävulinsäure KW - hydrothermal KW - formose KW - valerolactone KW - levulinic acid Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-52581 ER - TY - THES A1 - Kubo, Shiori T1 - Nanostructured carbohydrate-derived carbonaceous materials T1 - Nanostrukturierte kohlenstoffbasierte Materialien aus Kohlenhydraten N2 - Nanoporous carbon materials are widely used in industry as adsorbents or catalyst supports, whilst becoming increasingly critical to the developing fields of energy storage / generation or separation technologies. In this thesis, the combined use of carbohydrate hydrothermal carbonisation (HTC) and templating strategies is demonstrated as an efficient route to nanostructured carbonaceous materials. HTC is an aqueous-phase, low-temperature (e.g. 130 – 200 °C) carbonisation, which proceeds via dehydration / poly-condensation of carbon precursors (e.g. carbohydrates and their derivatives), allowing facile access to highly functional carbonaceous materials. Whilst possessing utile, modifiable surface functional groups (e.g. -OH and -C=O-containing moieties), materials synthesised via HTC typically present limited accessible surface area or pore volume. Therefore, this thesis focuses on the development of fabrication routes to HTC materials which present enhanced textural properties and well-defined porosity. In the first discussed synthesis, a combined hard templating / HTC route was investigated using a range of sacrificial inorganic templates (e.g. mesoporous silica beads and macroporous alumina membranes (AAO)). Via pore impregnation of mesoporous silica beads with a biomass-derived carbon source (e.g. 2-furaldehyde) and subsequent HTC at 180 oC, an inorganic / carbonaceous hybrid material was produced. Removal of the template component by acid etching revealed the replication of the silica into mesoporous carbonaceous spheres (particle size ~ 5 μm), representing the inverse morphological structure of the original inorganic body. Surface analysis (e.g. FTIR) indicated a material decorated with hydrophilic (oxygenated) functional groups. Further thermal treatment at increasingly elevated temperatures (e.g. at 350, 550, 750 oC) under inert atmosphere allowed manipulation of functionalities from polar hydrophilic to increasingly non-polar / hydrophobic structural motifs (e.g. extension of the aromatic / pseudo-graphitic nature), thus demonstrating a process capable of simultaneous control of nanostructure and surface / bulk chemistry. As an extension of this approach, carbonaceous tubular nanostructures with controlled surface functionality were synthesised by the nanocasting of uniform, linear macropores of an AAO template (~ 200 nm). In this example, material porosity could be controlled, showing increasingly microporous tube wall features as post carbonisation temperature increased. Additionally, by taking advantage of modifiable surface groups, the introduction of useful polymeric moieties (i.e. grafting of thermoresponsive poly(N-isopropylacrylamide)) was also demonstrated, potentially enabling application of these interesting tubular structures in the fields of biotechnology (e.g. enzyme immobilization) and medicine (e.g. as drug micro-containers). Complimentary to these hard templating routes, a combined HTC / soft templating route for the direct synthesis of ordered porous carbonaceous materials was also developed. After selection of structural directing agents and optimisation of synthesis composition, the F127 triblock copolymer (i.e. ethylene oxide (EO)106 propylene oxide (PO)70 ethylene oxide (EO)106) / D-Fructose system was extensively studied. D-Fructose was found to be a useful carbon precursor as the HTC process could be performed at 130 oC, thus allowing access to stable micellular phase. Thermolytic template removal from the synthesised ordered copolymer / carbon composite yielded functional cuboctahedron single crystalline-like particles (~ 5 μm) with well ordered pore structure of a near perfect cubic Im3m symmetry. N2 sorption analysis revealed a predominantly microporous carbonaceous material (i.e. Type I isotherm, SBET = 257 m2g-1, 79 % microporosity) possessing a pore size of ca. 0.9 nm. The addition of a simple pore swelling additive (e.g. trimethylbenzene (TMB)) to this system was found to direct pore size into the mesopore size domain (i.e. Type IV isotherm, SBET = 116 m2g-1, 60 % mesoporosity) generating pore size of ca. 4 nm. It is proposed that in both cases as HTC proceeds to generate a polyfuran-like network, the organised block copolymer micellular phase is essentially “templated”, either via hydrogen bonding between hydrophilic poly(EO) moiety and the carbohydrate or via hydrophobic interaction between hydrophobic poly(PO) moiety and forming polyfuran-like network, whilst the additive TMB presumably interact with poly(PO) moieties, thus swelling the hydrophobic region expanding the micelle template size further into the mesopore range. N2 - Nanoporöse kohlenstoffbasierte Materialien sind in der Industrie als Adsorbentien und Katalysatorträger weit verbreitet und gewinnen im aufstrebenden Bereich der Energiespeicherung/erzeugung und für Trennverfahren an wachsender Bedeutung. In der vorliegenden Arbeit wird gezeigt, dass die Kombination aus hydrothermaler Karbonisierung von Zuckern (HTC) mit Templatierungsstrategien einen effizienten Weg zu nanostrukturierten kohlenstoffbasierten Materialien darstellt. HTC ist ein in Wasser und bei niedrigen Temperaturen (130 - 200 °C) durchgeführter Karbonisierungsprozess, bei dem Zucker und deren Derivate einen einfachen Zugang zu hochfunktionalisierten Materialien erlauben. Obwohl diese sauerstoffhaltige Funktionalitäten auf der Oberfläche besitzen, an welche andere chemische Gruppen gebunden werden könnten, was die Verwendung für Trennverfahren und in der verzögerten Wirkstofffreisetzung ermöglichen sollte, ist die mittels HTC hergestellte Kohle für solche Anwendungen nicht porös genug. Das Ziel dieser Arbeit ist es daher, Methoden zu entwickeln, um wohldefinierte Poren in solchen Materialien zu erzeugen. Hierbei führte unter anderem der Einsatz von anorganischen formgebenden mesoporösen Silikapartikeln und makroporösen Aluminiumoxid-Membranen zum Erfolg. Durch Zugabe einer Kohlenstoffquelle (z. B. 2-Furfural), HTC und anschließender Entfernung des Templats konnten poröse kohlenstoffbasierte Partikel und röhrenförmige Nanostrukturen hergestellt werden. Gleichzeitig konnte durch eine zusätzliche Nachbehandlung bei hoher Temperatur (350-750 °C) auch noch die Oberflächenfunktionalität hin zu aromatischen Systemen verschoben werden. Analog zur Formgebung durch anorganische Template konnte mit sog. Soft-Templaten, z. B. PEO-PPO-PEO Blockcopolymeren, eine funktionelle poröse Struktur induziert werden. Hierbei machte man sich die Ausbildung geordneter Mizellen mit der Kohlenstoffquelle D-Fructose zu Nutze. Das erhaltene Material wies hochgeordnete Mikroporen mit einem Durchmesser von ca. 0,9 nm auf. Dieser konnte desweiteren durch Zugabe von Quell-Additiven (z. B. Trimethylbenzol) auf 4 nm in den mesoporösen Bereich vergrößert werden. Zusammenfassend lässt sich sagen, dass beide untersuchten Synthesewege nanostrukturierte kohlenstoffbasierte Materialien mit vielfältiger Oberflächenchemie liefern, und das mittels einer bei relativ niedriger Temperatur in Wasser ablaufenden Reaktion und einer billigen, nachhaltigen Kohlenstoffquelle. Die so hergestellten Produkte eröffnen vielseitige Anwendungsmöglichkeiten, z. B. zur Molekültrennung in der Flüssigchromatographie, in der Energiespeicherung als Anodenmaterial in Li-Ionen Akkus oder Superkondensatoren, oder als Trägermaterial für die gezielte Pharmakotherapie. KW - Nanostruktur KW - Kohlenstoff KW - Kohlenhydrate KW - Templating KW - hydrothermale Carbonisierung KW - Nanostructure KW - Carbon KW - Carbohydrate KW - Templating KW - Hydrothermal carbonisation Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-53157 ER - TY - THES A1 - Tan, Irene T1 - Towards greener stationary phases : thermoresponsive and carbonaceous chromatographic supports T1 - Zu grüner Separation : thermoresponsive und kohlenstoffhaltige chromatographische Trägermaterialien N2 - Polymers which are sensitive towards external physical, chemical and electrical stimuli are termed as ‘intelligent materials’ and are widely used in medical and engineering applications. Presently, polymers which can undergo a physical change when heat is applied at a certain temperature (cloud point) in water are well-studied for this property in areas of separation chemistry, gene and drug delivery and as surface modifiers. One example of such a polymer is the poly (N-isopropylacrylamide) PNIPAAM, where it is dissolved well in water below 32 oC, while by increasing the temperature further leads to its precipitation. In this work, an alternative polymer poly (2-(2-methoxy ethoxy)ethyl methacrylate-co- oligo(ethylene glycol) methacrylate) (P(MEO2MA-co-OEGMA)) is studied due to its biocompatibility and the ability to vary its cloud points in water. When a layer of temperature responsive polymer was attached to a single continuous porous piece of silica-based material known as a monolith, the thermoresponsive characteristic was transferred to the column surfaces. The hybrid material was demonstrated to act as a simple temperature ‘switch’ in the separation of a mixture of five steroids under water. Different analytes were observed to be separated under varying column temperatures. Furthermore, more complex biochemical compounds such as proteins were also tested for separation. The importance of this work is attributed to separation processes utilizing environmentally friendly conditions, since harsh chemical environments conventionally used to resolve biocompounds could cause their biological activities to be rendered inactive. N2 - Polymere, welche empfindlich gegenüber externen physikalischen, chemischen und elektrischen Einflüssen sind, werden „intelligente Materialien“ genannt. Diese werden weitverbreitet in medizinischen und technischen Anwendungen eingesetzt. Auf diesem Gebiet ausführlich erforschte Materialien sind Polymere, welche durch Hitze bei einer bestimmten Temperatur (Trübungspunkt) eine physikalische Veränderung eingehen können, genannt thermoresponsive Polymere. Eingesetzt werden diese z.B. in chromatographischen Trennverfahren, in Gen- und Wirkstofftransport Vorgängen und zur Oberflächenmodifikation. Ein Beispiel für so ein Polymer ist das poly(N-isopropylacrylamide) PNIPAAM, welches unter 32 °C in Wasser gelöst vorliegt und mit Erhöhung der Temperatur als Niederschlag ausfällt. In dieser Arbeit wurde ein alternatives Polymer, das poly(2-(2-methoxyethoxy)ethylmethacrylate-co-oligo(ethyleneglycol) methacrylate) (P(MEO2MA-co-OEGMA)), untersucht, in Bezug auf Biokompatibilität und der Änderung des Trübungspunktes in Wasser. Wenn eine Schicht eines temperaturempfindlichen Polymers auf einen Monolithen (einteiliger, poröser und auf Silika-basierendes Material) aufgebracht wird, werden die thermoresponsiven Eigenschaften auf die Oberfläche dieses Monolithen übertragen. Der Monolith dient hier als Säule in einer HPLC-Anlage. Es wurde gezeigt, dass das Hybrid-Material als einfacher „Temperaturschalter“ in der Trennung von fünf verschiedenen Steroiden in Wasser agieren kann. Untersucht wurde die Separation verschiedener Analyten mit dem Variieren der Säulentemperatur. Zusätzlich wurden mehr komplexe biochemische Stoffe, wie Proteine, getestet. Die Bedeutung dieser Arbeit ist zurückzuführen auf Separationsprozesse, welche umweltfreundlichen Bedingungen nutzen, da die rauen chemischen Bedingungen in konventionellen Separationsprozessen die biologische Inaktivität der Verbindungen zur Folge haben können. Der zweite Teil der Arbeit beschäftigte sich mit der Entwicklung eines alternativen Trägermaterials als Ersatz zu den Silika-basierende Trennungssäulen. Kohlenstoffmaterialien sind aufgrund ihrer ausgezeichneten mechanischen Härte und chemischen Stabilität eine vielversprechend Alternative. Die Synthese von Kohlenstoffkugeln als Trägermaterial kann als „grüner“ Prozess in meiner Arbeit angesehen werden, da milde Synthesebedingungen in purem Wasser verwendet wurden. Die Leistungsfähigkeit des Materials wurde mit einer Serie von Separationsreaktionen gezeigt. KW - thermoresponsive KW - poly(N-isopropylacrylamide) KW - oligo(ethyleneglycol) KW - Monolith KW - Chromatographie KW - thermoresponsive KW - poly(N-isopropyl acrylamide) KW - oligo(ethylene glycol) KW - monolith KW - chromatography Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-53130 ER - TY - THES A1 - Popovic, Jelena T1 - Novel lithium iron phosphate materials for lithium-ion batteries T1 - Neuartige Lithium-Eisen-Phosphat-Materialien für Lithium-Ionen-Batterien N2 - Conventional energy sources are diminishing and non-renewable, take million years to form and cause environmental degradation. In the 21st century, we have to aim at achieving sustainable, environmentally friendly and cheap energy supply by employing renewable energy technologies associated with portable energy storage devices. Lithium-ion batteries can repeatedly generate clean energy from stored materials and convert reversely electric into chemical energy. The performance of lithium-ion batteries depends intimately on the properties of their materials. Presently used battery electrodes are expensive to be produced; they offer limited energy storage possibility and are unsafe to be used in larger dimensions restraining the diversity of application, especially in hybrid electric vehicles (HEVs) and electric vehicles (EVs). This thesis presents a major progress in the development of LiFePO4 as a cathode material for lithium-ion batteries. Using simple procedure, a completely novel morphology has been synthesized (mesocrystals of LiFePO4) and excellent electrochemical behavior was recorded (nanostructured LiFePO4). The newly developed reactions for synthesis of LiFePO4 are single-step processes and are taking place in an autoclave at significantly lower temperature (200 deg. C) compared to the conventional solid-state method (multi-step and up to 800 deg. C). The use of inexpensive environmentally benign precursors offers a green manufacturing approach for a large scale production. These newly developed experimental procedures can also be extended to other phospho-olivine materials, such as LiCoPO4 and LiMnPO4. The material with the best electrochemical behavior (nanostructured LiFePO4 with carbon coating) was able to delive a stable 94% of the theoretically known capacity. N2 - Konventionelle Energiequellen sind weder nachwachsend und daher nachhaltig nutzbar, noch weiterhin langfristig verfügbar. Sie benötigen Millionen von Jahren um gebildet zu werden und verursachen in ihrer Nutzung negative Umwelteinflüsse wie starke Treibhausgasemissionen. Im 21sten Jahrhundert ist es unser Ziel nachhaltige und umweltfreundliche, sowie möglichst preisgünstige Energiequellen zu erschließen und nutzen. Neuartige Technologien assoziiert mit transportablen Energiespeichersystemen spielen dabei in unserer mobilen Welt eine große Rolle. Li-Ionen Batterien sind in der Lage wiederholt Energie aus entsprechenden Prozessen nutzbar zu machen, indem sie reversibel chemische in elektrische Energie umwandeln. Die Leistung von Li-Ionen Batterien hängen sehr stark von den verwendeten Funktionsmaterialien ab. Aktuell verwendete Elektrodenmaterialien haben hohe Produktionskosten, verfügen über limitierte Energiespeichekapazitäten und sind teilweise gefährlich in der Nutzung für größere Bauteile. Dies beschränkt die Anwendungsmöglichkeiten der Technologie insbesondere im Gebiet der hybriden Fahrzeugantriebe. Die vorliegende Dissertation beschreibt bedeutende Fortschritte in der Entwicklung von LiFePO4 als Kathodenmaterial für Li-Ionen Batterien. Mithilfe einfacher Syntheseprozeduren konnten eine vollkommen neue Morphologie (mesokristallines LiFePo4) sowie ein nanostrukturiertes Material mit exzellenten elektrochemischen Eigenschaften hergestellt werden. Die neu entwickelten Verfahren zur Synthese von LiFePo4 sind einschrittig und bei signifikant niedrigeren Temperaturen im Vergleich zu konventionellen Methoden. Die Verwendung von preisgünstigen und umweltfreundlichen Ausgangsstoffen stellt einen grünen Herstellungsweg für die large scale Synthese dar. Mittels des neuen Synthesekonzepts konnte meso- und nanostrukturiertes LiFe PO4 generiert werden. Die Methode ist allerdings auch auf andere phospho-olivin Materialien (LiCoPO4, LiMnPO4) anwendbar. Batterietests der besten Materialien (nanostrukturiertes LiFePO4 mit Kohlenstoffnanobeschichtung) ergeben eine mögliche Energiespeicherung von 94%. KW - Li-Ionen-Akkus KW - Kathode KW - LiFePO4 KW - Mesokristalle KW - Nanopartikel KW - Li-ion batteries KW - cathode KW - LiFePO4 KW - mesocrystals KW - nanoparticles Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-54591 ER - TY - THES A1 - ten Brummelhuis, Niels T1 - Self-assembly of cross-linked polymer micelles into complex higher-order aggregates T1 - Selbstorganisation von vernetzten Polymermizellen zu Komplexen Aggregaten mit höherer Ordnung N2 - The creation of complex polymer structures has been one of the major research topics over the last couple of decades. This work deals with the synthesis of (block co-)polymers, the creation of complex and stimuli-responsive aggregates by self-assembly, and the cross-linking of these structures. Also the higher-order self-assembly of the aggregates is investigated. The formation of poly-2-oxazoline based micelles in aqueous solution and their simultaneous functionalization and cross-linking using thiol-yne chemistry is e.g. presented. By introducing pH responsive thiols in the core of the micelles the influence of charged groups in the core of micelles on the entire structure can be studied. The charging of these groups leads to a swelling of the core and a decrease in the local concentration of the corona forming block (poly(2-ethyl-2-oxazoline)). This decrease in concentration yields a shift in the cloud point temperature to higher temperatures for this Type I thermoresponsive polymer. When the swelling of the core is prohibited, e.g. by the introduction of sufficient amounts of salt, this behavior disappears. Similar structures can be prepared using complex coacervate core micelles (C3Ms) built through the interaction of weakly acidic and basic polymer blocks. The advantage of these structures is that two different stabilizing blocks can be incorporated, which allows for more diverse and complex structures and behavior of the micelles. Using block copolymers with either a polyanionic or a polycationic block C3Ms could be created with a corona which contains two different soluble nonionic polymers, which either have a mixed corona or a Janus type corona, depending on the polymers that were chosen. Using NHS and EDC the micelles could easily be cross-linked by the formation of amide bonds in the core of the micelles. The higher-order self-assembly behavior of these core cross-linked complex coacervate core micelles (C5Ms) was studied. Due to the cross-linking the micelles are stabilized towards changes in pH and ionic strength, but polymer chains are also no longer able to rearrange. For C5Ms with a mixed corona likely network structures were formed upon the collapse of the thermoresponsive poly(N-isopropylacrylamide) (PNIPAAm), whereas for Janus type C5Ms well defined spherical aggregates of micelles could be obtained, depending on the pH of the solution. Furthermore it could be shown that Janus micelles can adsorb onto inorganic nanoparticles such as colloidal silica (through a selective interaction between PEO and the silica surface) or gold nanoparticles (by the binding of thiol end-groups). Asymmetric aggregates were also formed using the streptavidin-biotin binding motive. This is achieved by using three out of the four binding sites of streptavidin for the binding of one three-arm star polymer, end-functionalized with biotin groups. A homopolymer with one biotin end-group can be used to occupy the last position. This binding of two different polymers makes it possible to create asymmetric complexes. This phase separation is theoretically independent of the kind of polymer since the structure of the protein is the driving force, not the intrinsic phase separation between polymers. Besides Janus structures also specific cross-linking can be achieved by using other mixing ratios. N2 - In den letzten Jahrzehnten war die Herstellung von komplizierten Polymerstrukturen ein wichtiges Forschungsthema für Polymerchemiker. Diese Arbeit behandelt die Synthese von (Blockco-)Polymere, die Herstellung von komplexen und stimulus-responsiven Aggregaten (Mizellen) durch Selbstorganisation, sowie die Vernetzung dieser Strukturen. Auch die Anordnung dieser Mizellen zu Aggregaten mit höherer Ordnung wurde untersucht. Zum Beispiel wird die Bildung von Poly(2-oxazolin) basierter Mizellen in wässriger Lösung und die gleichzeitige Funktionalisierung und Vernetzung dieser Mizellen mittels Thiol-In-Chemie beschrieben. Durch die Einführung von pH-responsiven Gruppen in den Kern der Mizellen konnte der Einfluss von geladenen Gruppen im Kern auf das gesamte Aggregat untersucht werden. Das Einführen von Ladung führt zum Quellen des Mizellkerns und damit zu einer niedrigeren lokalen Konzentration von wasserlöslichem Poly(2-ethyl-2-oxazolin) (PEtOx). Diese niedrigere Konzentration ergibt eine Verschiebung des Trübungspunkt dieses Typ I thermoresponsiven Polymers zu höheren Temperaturen. Wenn die Ausdehnung des Kerns nicht erfolgt, z.B. in Anwesenheit einer hohen Salzkonzentration, findet dieser Effekt nicht statt. Ähnliche Strukturen können mithilfe von Mizellen mit komplexen Koazervatkern (English: Complex Coacervate Core Micelles, C3Ms) durch die Interaktion zwischen Polymeren mit negativ und positiv geladenen Blöcken hergestellt werden. Der Vorteil dieser Strukturen ist, dass zwei verschiedene stabilisierende Polymerblöcke in einem Aggregat vereint werden können, was zur Bildung einer Vielzahl noch komplizierterer Strukturen und zu mehr Responsivität führen kann. Mithilfe von Blockcopolymeren, bestehend aus jeweils einen polyionischen Block und einem neutralen Block (z.B. PEtOx, PEO oder poly(N-isopropylacrylamid) (PNIPAAm)), konnten C3Ms hergestellt werden, in denen zwei neutrale Polymere vereint wurden. Es konnte gezeigt werden, dass diese Polymere sowohl gemischt als auch phasensepariert vorliegen können (letzteres ergibt Janus Mizellen), abhängig welche Polymere gewählt werden. Durch Vernetzung im Kern konnten die Mizellen stabilisiert und fixiert werden (C5Ms). Die Selbstanordnung dieser vernetzten Mizellen zu größeren Aggregaten wurde untersucht. Wenn eine Lösung mit vernetzten Mizellen über den Trübungspunkt von PNIPAAm erhitzt wurde, bildeten sich Netzwerke aus Mizellen mit einer gemischten Korona, während Janus Mizellen sich zu wohldefinierten Aggregaten höherer Ordnung anordneten. Weiterhin konnte gezeigt werden, dass Janus Mizellen sich auf der Oberfläche von anorganischen Nanopartikeln anlagern können; z.B. durch die selektive Wechselwirkung zwischen PEO und Silica oder durch die Adsorption von Thiolgruppen auf Gold-Nanopartikeln. Asymmetrische Aggregate konnten auch mithilfe des Streptavidin-Biotin Komplexes erhalten werden. Durch das Binden der Biotin-Endgruppen eines dreiarmigen Sternpolymeren an eine Streptavidin-Einheit und anschließende Belegung der verbliebenen Bindungsstelle mit der Biotin-gruppe eines Homopolymers, können sehr spezifisch zwei verschiedene Polymere in einem Janus Aggregat vereint werden. Auch die Vernetzung des Streptavidins kann erzielt werden, indem andere Mischverhältnisse gewählt werden. KW - Polymerchemie KW - Selbstorganisation KW - Mizellen KW - Janus KW - Vernetzung KW - Polymer chemistry KW - self-assembly KW - micelles KW - Janus KW - cross-linking Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-52320 ER - TY - THES A1 - Fellinger, Tim-Patrick T1 - Hydrothermal and ionothermal carbon structures T1 - Hydrothermale und ionothermale Kohlenstoffstrukturen BT - from carbon negative materials to energy applications N2 - The needs for sustainable energy generation, but also a sustainable chemistry display the basic motivation of the current thesis. By different single investigated cases, which are all related to the element carbon, the work can be devided into two major topics. At first, the sustainable synthesis of “useful” carbon materials employing the process of hydrothermal carbonisation (HC) is described. In the second part, the synthesis of heteroatom - containing carbon materials for electrochemical and fuel cell applications employing ionic liquid precursors is presented. On base of a thorough review of the literature on hydrothermolysis and hydrothermal carbonisation of sugars in addition to the chemistry of hydroxymethylfurfural, mechanistic considerations of the formation of hydrothermal carbon are proposed. On the base of these reaction schemes, the mineral borax, is introduced as an additive for the hydrothermal carbonisation of glucose. It was found to be a highly active catalyst, resulting in decreased reaction times and increased carbon yields. The chemical impact of borax, in the following is exploited for the modification of the micro- and nanostructure of hydrothermal carbon. From the borax - mediated aggregation of those primary species, widely applicable, low density, pure hydrothermal carbon aerogels with high porosities and specific surface areas are produced. To conclude the first section of the thesis, a short series of experiments is carried out, for the purpose of demonstrating the applicability of the HC model to “real” biowaste i.e. watermelon waste as feedstock for the production of useful materials. In part two cyano - containing ionic liquids are employed as precursors for the synthesis of high - performance, heteroatom - containing carbon materials. By varying the ionic liquid precursor and the carbonisation conditions, it was possible to design highly active non - metal electrocatalyst for the reduction of oxygen. In the direct reduction of oxygen to water (like used in polymer electrolyte fuel cells), compared to commercial platinum catalysts, astonishing activities are observed. In another example the selective and very cost efficient electrochemical synthesis of hydrogen peroxide is presented. In a last example the synthesis of graphitic boron carbon nitrides from the ionic liquid 1 - Ethyl - 3 - methylimidazolium - tetracyanoborate is investigated in detail. Due to the employment of unreactive salts as a new tool to generate high surface area these materials were first time shown to be another class of non - precious metal oxygen reduction electrocatalyst. N2 - Die Notwendigkeit einer nachhaltigen Energiewirtschaft, sowie der nachhaltigen Chemie stellen die Motivation der vorgelegten Arbeit. Auf Grundlage separater Untersuchungen, die jeweils in engem Bezug zum Element Kohlenstoff stehen, kann die Arbeit in zwei Themenfelder geordnet werden. Der erste Teil behandelt die nachhaltige Herstellung nützlicher Kohlenmaterialien mit Hilfe des Verfahrens der hydrothermalen Carbonisierung. Im zweiten Teil wird die Synthese von Bor und Stickstoff angereicherten Kohlen aus ionischen Flüssigkeiten für elektrochemische Anwendungen abgehandelt. Insbesondere geht es um die Anwendung in Wasserstoff-Brennstoffzellen. Als Ergebnis einer sorgfältigen Literatur¬zusammenfassung der Bereiche Hydrothermolyse, hydrothermale Carbonisierung und Chemie des Hydroxymethylfurfurals wird ein chemisch-mechanistisches Modell zur Entstehung der Hydrothemalkohle vorgestellt. Auf der Basis dieses Modells wird ein neues Additiv zur hydrothermalen Carbonisierung von Zuckern vorgestellt. Die Verwendung des einfachen Additivs, genauer Borax, erlaubt eine wesentlich verkürzte und zu niedrigeren Temperaturen hin verschobene Prozessführung mit höheren Ausbeuten. Anhand des mechanistischen Modells wird ein Einfluss auf die Reaktion von Zuckern mit der reaktiven Kohlenvorstufe (Hydroxymethylfurfural) identifiziert. Die chemische Wirkung des Minerals Borax in der hydrothermalen Carbonisierung wird im Folgenden zur Herstellung vielfältig anwendbarer, hochporöser Kohlen mit einstellbarer Partikelgröße genutzt. Zum Abschluss des ersten Teils ist in einer Serie einfacher Experimente die Anwendbarkeit des mechanischen Modells auf die Verwendung „echter“ Biomasse in Form von Wassermelonenabfall gezeigt. Im zweiten Teil werden verschiedene cyano-haltige ionische Flüssigkeiten zur ionothermalen Synthese von Hochleistungskohlen verwendet. Durch Variation der ionischen Flüssigkeiten und Verwendung unterschiedlicher Synthesebedingungen wird die Herstellung hochaktiver, metallfreier Katalysatoren für die elektrochemische Reduktion von Sauerstoff erreicht. In der direkten Reduktion von Sauerstoff zu Wasser (wie sie in Brennstoffzellen Anwendung findet) werden, verglichen zu konventionellen Platin-basierten elektrochemischen Katalysatoren, erstaunliche Aktivitäten erreicht. In einem anderen Beispiel wird die selektive Herstellung von Wasserstoffperoxid zu sehr geringen Kosten vorgestellt. Abschließend wird anhand der Verwendung der ionischen Flüssigkeit 1-Ethyl-3-methylimidazolium-tetracyanoborat eine detaillierte Betrachtung zur Herstellung von graphitischem Borcarbonitrid vorgestellt. Unter Verwendung unreaktiver Salze, als einfaches Werkzeug zur Einführung großer inneren Oberflächen wird erstmals die elektrokatalytische Aktivität eines solchen Materials in der elektrochemischen Sauerstoffreduktion gezeigt. KW - Hydrothermalkohle KW - ionische Flüssigkeiten KW - poröse Materialien KW - Elektrokatalyse KW - hydrothermal carbon KW - ionic liquids KW - porous materials KW - electrocatalysis Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-57825 ER - TY - JOUR A1 - Kita-Tokarczyk, Katarzyna A1 - Junginger, Mathias A1 - Belegrinou, Serena A1 - Taubert, Andreas ED - Muller, AHE ED - Borisov, O T1 - Amphiphilic polymers at interfaces JF - Advances in polymer science JF - Advances in Polymer Science N2 - Self-assembly phenomena in block copolymer systems are attracting considerable interest from the scientific community and industry alike. Particularly interesting is the behavior of amphiphilic copolymers, which can self-organize into nanoscale-sized objects such as micelles, vesicles, or tubes in solution, and which form well-defined assemblies at interfaces such as air-liquid, air-solid, or liquid-solid. Depending on the polymer chemistry and architecture, various types of organization at interfaces can be expected, and further exploited for applications in nanotechnology, electronics, and biomedical sciences. In this article, we discuss the formation and characterization of Langmuir monolayers from various amphiphilic block copolymers, including chargeable and thus pH-responsivematerials. Solid-supported polymer films are reviewed in the context of alteration of surface properties by ultrathin polymer layers and the possibilities for application in tissue engineering, sensors and biomaterials. Finally, we focus on how organic and polymer monolayers influence the growth of inorganic materials. This is a truly biomimetic approach since Nature uses soft interfaces to control the nucleation, growth, and morphology of biominerals such as calcium phosphate, calcium carbonate, and silica. KW - Amphiphilic polymers KW - Langmuir monolayers KW - Polymers on surfaces KW - Bio-inspired mineralization Y1 - 2011 SN - 978-3-642-22297-9 U6 - https://doi.org/10.1007/12_2010_58 SN - 0065-3195 VL - 242 IS - 1 SP - 151 EP - 201 PB - Springer CY - Berlin ER - TY - THES A1 - Unterlass, Miriam Margarethe T1 - From monomer salts and their tectonic crystals to aromatic polyimides : development of neoteric synthesis routes Y1 - 2011 CY - Potsdam ER - TY - THES A1 - Schwadtke, Ulrike T1 - Synthese und Charakterisierung von partiell fluorierten Blockcopolymeren Y1 - 2011 CY - Potsdam ER - TY - THES A1 - Früh, Johannes T1 - Structural change of polyelectrolyte multilayers under mechanical stress Y1 - 2011 CY - Potsdam ER - TY - THES A1 - Berger, René T1 - Die Deacetylierungs- Diazotierungs- Kupplungssequenz : Synthese von Aryldiazoniumtetrafluoroboraten aus Acetaniliden und deren in situ-Umsetzung mit Alken, Alkinen und Kaliumorganifluoroboraten Y1 - 2011 CY - Potsdam ER - TY - GEN A1 - Füchsel, Gernot T1 - Elektronengetriebene Reaktionen auf Oberflächen : die Dynamik der femtosekundenlaserinduzierten Desorption von H2/D2 von Ru(001) Y1 - 2011 CY - Potsdam ER - TY - THES A1 - Jelicic, Aleksandra T1 - Combining polymethacrylates and ionic liquids : a way to create and understand Y1 - 2011 CY - Potsdam ER - TY - THES A1 - Berg, John K. T1 - Size-dependent wetting behavior of organic molecules on solid surfaces Y1 - 2011 CY - Potsdam ER - TY - THES A1 - Dittrich, Matthias T1 - Physical-chemical characterisation of new lipids designed for non-viral gene transfection Y1 - 2011 CY - Potsdam ER - TY - THES A1 - Weber, Nancy T1 - Die Synthese "schizomorpher" Copolymer - Latexteilchen Y1 - 2011 CY - Potsdam ER - TY - THES A1 - Bramborg, Andrea T1 - Regioselektive Synthese von Alkylarenen durch ipso-substitution aromatischer Carbonsäuren Y1 - 2011 CY - Potsdam ER - TY - THES A1 - Schenk, Anna Sophia T1 - On the structure of bio-inspired calcite-polymer hybrid crystal : hierarchical levels from the micrometer- to the †ngström-scale Y1 - 2011 CY - Potsdam ER - TY - THES A1 - Geißler, Diana T1 - Synthese funktionalisierter Furane durch Acrylatmethese und Übergangsmetall-katalysierte C-C- Verknüpfungsreaktionen Y1 - 2011 CY - Potsdam ER - TY - THES A1 - Kramer, Markus T1 - NMR-spektroskopische Untersuchungen an potentiellen Chitinaseinhibitoren im freien und protein-gebunden Zustand Y1 - 2011 CY - Potsdam ER - TY - THES A1 - Köth, Anja T1 - Form- und Größenkontrollierte Synthese von Gold Nanopartikeln mit Maltose-modifiziertem Poly(ethylenimin) Y1 - 2011 CY - Potsdam ER - TY - THES A1 - Fechner, Mabya T1 - Synthetische Polyampholyte als pH-sensitive Komponente in selbstorganisierten Systemen zur Nanostrukturierung von Materialien Y1 - 2011 CY - Potsdam ER - TY - THES A1 - Hörnke, Maria T1 - ß-Sheet formation of amyloidogenic model peptides at hydrophobic-hydrophilic interfaces BT - ß-Sheet formation of amyloidogenic model peptides at hydrophobic-hydrophilic interfaces Y1 - 2011 CY - Potsdam ER - TY - THES A1 - Hölter, Frank T1 - Synthese phenologischer Diazoniumsalze und ihre Anwendung in Palladium-kristalisierten Kupplungsreaktionen Y1 - 2011 CY - Potsdam ER - TY - THES A1 - Hass, Roland T1 - Angewandte Photonendichtewellen Spektroskopie Y1 - 2011 CY - Potsdam ER - TY - THES A1 - Vukicevic, Radovan T1 - Iodine- and azide-terminated poly(vinylidene fluoride) as a building block for the preparation of hybrid materials and block copolymers Y1 - 2011 CY - Potsdam ER - TY - JOUR A1 - Jelicic, Aleksandra A1 - Yasin, Muttaqin A1 - Beuermann, Sabine T1 - Toward the description and prediction of solvent induced variations in Methacrylate Propagation Rate Coefficients on the basis of Solvatochromic Parameters JF - Macromolecular reaction engineering N2 - Benzyl methacrylate (BzMA) propagation rate coefficients, k(p), were determined in ionic liquids and common organic solvents via pulsed-laser polymerizations with subsequent polymer analysis by size-exclusion chromatography (PLP-SEC). The aim of the work is to gain a deeper understanding of the solvent influence on k(p) and to develop a general correlation between solvent-induced variations in k(p) and solvent properties. Applying a linear solvation energy relationship (LSER), which correlates k(p) to solvent solvatochromic parameters, suggests that dipolarity/polarizability determines the solvent influence on k(p). To compare the solvent influence on BzMA k(p) with data for methyl methacrylate, hydroxypropyl methacrylate, and 2-ethoxyethyl methacrylate normalized k(p) data were treated by a single LSER, providing a universal treatment of the solvent influence on the propagation kinetics of the four monomers. Further, the predictive capabilities of this universal correlation were tested with additional monomers from the methacrylate family. KW - ionic liquid KW - kinetics (polym.) KW - radical polymerization KW - solvent influence Y1 - 2011 U6 - https://doi.org/10.1002/mren.201000058 SN - 1862-832X VL - 5 IS - 5-6 SP - 232 EP - 242 PB - Wiley-Blackwell CY - Malden ER - TY - JOUR A1 - Kolocouris, Antonios A1 - Zervos, Nikolaos A1 - De Proft, Frank A1 - Koch, Andreas T1 - Improper Hydrogen Bonded Cyclohexane C-H-ax center dot center dot center dot Y-ax Contacts theoretical predictions and experimental Evidence from H-1 NMR Spectroscopy of Suitable Axial Cyclohexane Models JF - The journal of organic chemistry N2 - C-H-ax center dot center dot center dot Y-ax are a textbook prototype of steric hindrance in organic chemistry. The nature of these contacts is investigated in this work. MP2/6-31+G(d,p) calculations predicted the presence of improper hydrogen bonded C-H-ax center dot center dot center dot Y-ax of different strength in substituted cyclohexane rings. To support the theoretical predictions with experimental evidence, several synthetic 2-substituted adamantane analogues (1-24) with suitable improper H-bonded C-H-ax center dot center dot center dot Y-ax contacts of different strength were used as models of a substituted cyclohexane ring. The H-1 NMR signal separation, Delta delta(gamma-CH2), within the cyclohexane ring gamma-CH(2)s is raised when the MP2/6-31+G(d,p) calculated parameters, reflecting the strength of the H-bonded C-H-ax center dot center dot center dot Y-ax contact, are increased. In molecules with enhanced improper H-bonded contacts C-H-ax center dot center dot center dot Y-ax, like those having sterically crowded contacts (Y-ax = t-Bu) or contacts including considerable electrostatic attractions (Y-ax = O-C or O=C) the calculated DFT steric energies of the gamma-axial hydrogens are considerably reduced reflecting their electron cloud compression. The results suggest that the proton H-ax electron cloud compression, caused by the C-H-ax center dot center dot center dot Y-ax contacts, and the resulting increase in Delta delta(gamma-CH2) value can be effected not just from van der Waals spheres compression, but more generally from electrostatic attraction forces and van der Waals repulsion, both of which are improper H-bonding components. Y1 - 2011 U6 - https://doi.org/10.1021/jo102353f SN - 0022-3263 VL - 76 IS - 11 SP - 4432 EP - 4443 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Schmidt, Bernd A1 - Berger, René A1 - Kelling, Alexandra A1 - Schilde, Uwe T1 - Pd-Catalyzed [2+2+1] coupling of alkynes and arenes phenol diazonium salts as mechanistic trapdoors JF - Chemistry - a European journal N2 - Alkynes and phenol diazonium salts undergo a Pd-catalyzed [2+2+1] cyclization reaction to spiro[4,5]decatetraene-7-ones. This structure was confirmed for one example by X-ray single-crystal structure analysis. The reaction is believed to proceed through oxidative addition of the phenol diazonium cation to Pd(0), subsequent insertion of two alkynes, followed by irreversible spirocyclization. KW - alkynes KW - diazo compounds KW - palladium KW - phenols KW - spirocycles Y1 - 2011 U6 - https://doi.org/10.1002/chem.201100609 SN - 0947-6539 VL - 17 IS - 25 SP - 7032 EP - 7040 PB - Wiley-Blackwell CY - Malden ER - TY - JOUR A1 - Antoniou, Stella A1 - Pashalidis, Ioannis A1 - Gessner, Andre A1 - Kumke, Michael Uwe T1 - Spectroscopic investigations on the effect of humic acid on the formation and solubility of secondary solid phases of Ln(2)(CO3)(3) JF - Journal of rare earths N2 - The formation of secondary Ln(III) solid phases (e.g., Nd-2(CO3)(3) and Sm-2(CO3)(3)) was studied as a function of the humic acid concentration in 0.1 mol/L NaClO4 aqueous solution in the neutral pH range (5-6.5). The solid phases under investigation were prepared by alkaline precipitation under 100% CO2 atmosphere and characterized by attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), X-ray diffraction (XRD), time-resolved laser fluorescence spectroscopy (TRLFS), diffuse reflectance ultraviolet-visible (DR-UV-Vis), Raman spectroscopy, and solubility measurements. The spectroscopic data obtained indicated that Nd-2(CO3)(3) and Sm-2(CO3)(3) were stable and remained the solubility limiting solid phases even in the presence of increased humic acid concentration (0.5 g/L) in solution. Upon base addition in the Ln(III)-HA system, decomplexation of the previously formed Ln(III)-humate complexes and precipitation of two distinct phases occurred, the inorganic (Ln(2)(CO3)(3)) and the organic phase (HA), which was adsorbed on the particle surface of the former. Nevertheless, humic acid affected the particle size of the solid phases. Increasing humic acid concentration resulted in decreasing crystallite size of the Nd-2(CO3)(3) and increasing crystallite size of the Sm-2(CO3)(3) solid phase, and affected inversely the solubility of the solid phases. However, this impact on the solid phase properties was expected to be of minor relevance regarding the chemical behavior and migration of trivalent lanthanides and actinides in the geosphere. KW - lanthanide ions KW - humic acid KW - solid phase KW - solubility KW - Raman KW - TRLFS KW - DR-UV-Vis KW - rare earths Y1 - 2011 U6 - https://doi.org/10.1016/S1002-0721(10)60490-5 SN - 1002-0721 VL - 29 IS - 6 SP - 516 EP - 521 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Baranac-Stojanovic, Marija A1 - Keinpeter, Erich T1 - Quantification of the aromaticity of 2-Alkylidenethiazolines subjected to push-pull activity JF - The journal of organic chemistry N2 - Through-space NMR shieldings (TSNMRSs) of a series of 2-alkylidenethiazolines subjected to push-pull activity have been calculated by the GIAO method employing the nucleus-independent chemical shift (NICS) concept and visualized as iso-chemical-shielding surfaces (ICSSs). The ICSSs were applied to quantify and visualize the degree of aromaticity of the studied compounds, which has been shown to be in excellent correlation with the push-pull behavior, quantified by the quotient (pi*/pi) method. Dissection of the absolute magnetic shielding values into individual contributions of bonds and lone pairs by the natural chemical shielding-natural bond orbital (NCS-NBO) analysis has revealed unexpected details. Y1 - 2011 U6 - https://doi.org/10.1021/jo200294f SN - 0022-3263 VL - 76 IS - 10 SP - 3861 EP - 3871 PB - American Chemical Society CY - Washington ER - TY - CHAP A1 - Prokop, A. A1 - Zadolinnaya, S. A1 - Abduvaliev, A. A1 - Frias, C. A1 - Hagenow, K. A1 - Voigt, A. A1 - Tatarskiy, V. T1 - Novel copper complexes with potent/synergistic antitumor activity in vivo and promising clinical activity T2 - Journal of clinical oncology Y1 - 2011 SN - 0732-183X SN - 1527-7755 VL - 29 IS - 15 PB - American Society of Clinical Oncology CY - Alexandria ER - TY - JOUR A1 - Poghosyan, Armen H. A1 - Arsenyan, Levon H. A1 - Gharabekyan, Hrant H. A1 - Falkenhagen, Sandra A1 - Koetz, Joachim A1 - Shahinyan, Aram A. T1 - Molecular dynamics simulations of inverse sodium dodecyl sulfate (SDS) micelles in a mixed toluene/pentanol solvent in the absence and presence of poly(diallyldimethylammonium chloride) (PDADMAC) JF - Journal of colloid and interface science N2 - We have performed a 15 ns molecular dynamics simulation of inverse sodium dodecyl sulfate (SDS) micelles in a mixed toluene/pentanol solvent in the absence and presence of a cationic polyelectrolyte, i.e. poly(diallyldimethylammonium chloride) (PDADMAC). The NAMD code and CHARMM force field were used. During the simulation time, the radii of SOS inverse micelles changed and the radii of the water droplets have been calculated. The behavior of SDS hydrocarbon chains has been characterized by calculating the orientation order parameter and the chain average length. The water droplet properties (water flow, water molecules displacement) have been examined. In summary the MD simulations indicate a more rigid and ordered surfactant film due to the formation of a polyelectrolyte palisade layer in full agreement with the experimental findings, e.g. the viscosity increase and shift of the percolation boundary. KW - Surfactant micelles KW - Molecular dynamics simulations KW - SDS Y1 - 2011 U6 - https://doi.org/10.1016/j.jcis.2011.01.091 SN - 0021-9797 VL - 358 IS - 1 SP - 175 EP - 181 PB - Elsevier CY - San Diego ER - TY - JOUR A1 - Kafka, Stanislav A1 - Hauke, Sylvia A1 - Salcinovic, Arjana A1 - Soidinsalo, Otto A1 - Urankar, Damijana A1 - Kosmrlj, Janez T1 - Copper(I)-Catalyzed [3+2] Cycloaddition of 3-Azidoquinoline-2,4(1H,3H)-diones with terminal alkynes JF - Molecules N2 - 3-Azidoquinoline-2,4(1H,3H)-diones 1, which are readily available from 4-hydroxyquinolin-2(1H)-ones 4 via 3-chloroquinoline-2,4(1H, 3H)-diones 5, afford, in copper(I)-catalyzed [3 + 2] cycloaddition reaction with terminal acetylenes, 1,4-disubstituted 1,2,3-triazoles 3 in moderate to excellent yields. The structures of compounds 3 were confirmed by (1)H and (13)C-NMR spectroscopy, combustion analyses and mass spectrometry. KW - cycloaddition KW - azides KW - quinoline-2,4(1H,3H)-diones KW - terminal alkynes KW - 1,2,3-triazoles Y1 - 2011 U6 - https://doi.org/10.3390/molecules16054070 SN - 1420-3049 VL - 16 IS - 5 SP - 4070 EP - 4081 PB - MDPI CY - Basel ER - TY - JOUR A1 - Adamovich, Sergey N. A1 - Mirskova, Anna N. A1 - Mirskov, Rudolf G. A1 - Schilde, Uwe T1 - Synthesis and crystal structure of 1,4,10,13-tetraoxa-7,16-diazoniumcyclo-octadecane bis(4-chloro-2-methyl-phenoxyacetate) JF - Chemistry central journal N2 - The title compound was prepared by the reaction of 1,4,10,13-tetraoxa-7,16-diazacyclo-octadecane with 4-chloro-2-methyl-phenoxyacetic acid in a ratio of 1:2. The structure has been proved by the data of elemental analysis, IR spectroscopy, NMR ((1)H, (13)C) technique and by X-ray diffraction analysis. Intermolecular hydrogen bonds between the azonium protons and oxygen atoms of the carboxylate groups were found. Immunoactive properties of the title compound have been screened. The compound has the ability to suppress spontaneous and Con A-stimulated cell proliferation in vitro and therefore can be considered as immunodepressant. Y1 - 2011 U6 - https://doi.org/10.1186/1752-153X-5-23 SN - 1752-153X VL - 5 IS - 17 PB - BioMed Central CY - London ER - TY - JOUR A1 - Tremblay, Jean Christophe T1 - Laser control of molecular excitations in stochastic dissipative media JF - The journal of chemical physics : bridges a gap between journals of physics and journals of chemistr N2 - In the present work, ideas for controlling photochemical reactions in dissipative environments using shaped laser pulses are presented. New time-local control algorithms for the stochastic Schrodinger equation are introduced and compared to their reduced density matrix analog. The numerical schemes rely on time-dependent targets for guiding the reaction along a preferred path. The methods are tested on the vibrational control of adsorbates at metallic surfaces and on the ultrafast electron dynamics in a strong dissipative medium. The selective excitation of the specific states is achieved with improved yield when using the new algorithms. Both methods exhibit similar convergence behavior and results compare well with those obtained using local optimal control for the reduced density matrix. The favorable scaling of the methods allows to tackle larger systems and to control photochemical reactions in dissipative media of molecules with many more degrees of freedom. Y1 - 2011 U6 - https://doi.org/10.1063/1.3587093 SN - 0021-9606 VL - 134 IS - 17 PB - American Institute of Physics CY - Melville ER - TY - JOUR A1 - Fechner, Mabya A1 - Koetz, Joachim T1 - Polyampholyte-Surfactant film tuning in reverse microemulsions JF - Langmuir N2 - The pH-dependent influence of two different strongly alternating copolymers [poly(N,N'-diallyl-N,N'-dimethylammonium-alt-N-phenylmaleamic carboxylate) (PalPh) and poly(N,N'-diallyl-N,a-dimethylammonium-alt-3,5-bis(carboxyphenyl) maleamic carboxylate) (PalPhBisCarb)] based on N,N'-diallyl-N, -dimethylarnmonium chloride and maleamic acid derivatives on the phase behavior of a water-in-oil (w/o) microemulsion system made from toluene pentanol (1:1) and sodium dodecyl sulfate was investigated. It was shown that the optically dear phase range can be extended after incorporation of these copolymers, leading to an increased water solubilization capacity. Additionally, the required amount of surfactant to establish a clear w/o microemulsion depends on the pH value, which means the hydrophobicity of the copolymers. Conductivity measurements show that droplet droplet interactions in the w/o microemulsion are decreased at acidic but increased at alkaline pH in the presence of the copolymers. From differenctial scanning calorimetry measurements one can further conclude that these results are in agreement with a change of the position of the copolymer in the interfacial region of the surfactant film. The more hydrophobic PalPh can be directly incorporated into the surfactant film, whereas the phenyl groups of PalPhBisCarb flip into the water core by increasing the pH value. Y1 - 2011 U6 - https://doi.org/10.1021/la200791k SN - 0743-7463 VL - 27 IS - 9 SP - 5316 EP - 5323 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Dudek, Melanie A1 - Clegg, Jack K. A1 - Glasson, Christopher R. K. A1 - Kelly, Norman A1 - Gloe, Kerstin A1 - Gloe, Karsten A1 - Kelling, Alexandra A1 - Buschmann, Hans-Jürgen A1 - Jolliffe, Katrina A. A1 - Lindoy, Leonard F. A1 - Meehan, George V. T1 - Interaction of Copper(II) with Ditopic Pyridyl-beta-diketone Ligands dimeric, framework, and metallogel structures JF - Crystal growth & design : integrating the fields of crystal engineering and crystal growth for the synthesis and applications of new materials N2 - The interaction of Cu(II) with three beta-diketone ligands of type R(1)C(O)CH(2)C(O)R(2) (where R(1) = 2-, 3-, or 4-pyridyl and R(2) = C(6)H(5), respectively), HL(1)-HL(3), along with the X-ray structures and the pK(a) values of each ligand, are reported. HL(1) yields a dimeric complex of type [Cu(L(1))(2)](2). In this structure, two deprotonated HL(1) ligands coordinate in a trans planar fashion around each Cu(II) center, one oxygen from each CuL(2) unit bridges to an axial site of the second complex unit such that both Cu(II) centers attain equivalent five-coordinate square pyramidal geometries. The two-substituted pyridyl groups in this complex do not coordinate, perhaps reflecting steric factors associated with the closeness of the pyridyl nitrogen to the attached (conjugated) beta-diketonato backbone of each ligand. The remaining two Cu(II) species, derived from HL(2) and HL(3), are both coordination polymers of type [Cu(L)(2)](n) in which the terminal pyridine group of each ligand is intermolecularly linked to an adjacent copper center to generate the respective infinite structures. HL(2) was also demonstrated to form a fibrous metallogel when reacted with CuCl(2) in an acetonitrile/water mixture under defined conditions. Y1 - 2011 U6 - https://doi.org/10.1021/cg101629w SN - 1528-7483 VL - 11 IS - 5 SP - 1697 EP - 1704 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Lahn, Mattes A1 - Dosche, Carsten A1 - Hille, Carsten T1 - Two-photon microscopy and fluorescence lifetime imaging reveal stimulus-induced intracellular Na+ and Cl- changes in cockroach salivary acinar cells JF - American journal of physiology : Cell physiology N2 - Lahn M, Dosche C, Hille C. Two-photon microscopy and fluorescence lifetime imaging reveal stimulus-induced intracellular Na+ and Cl- changes in cockroach salivary acinar cells. Am J Physiol Cell Physiol 300: C1323-C1336, 2011. First published February 23, 2011; doi: 10.1152/ajpcell.00320.2010.-The intracellular ion homeostasis in cockroach salivary acinar cells during salivation is not satisfactorily understood. This is mainly due to technical problems regarding strong tissue autofluorescence and ineffective ion concentration quantification. For minimizing these problems, we describe the successful application of two-photon (2P) microscopy partly in combination with fluorescence lifetime imaging microscopy (FLIM) to record intracellular Na+ and Cl- concentrations ([Na+](i), [Cl-](i)) in cockroach salivary acinar cells. Quantitative 2P-FLIM Cl- measurements with the dye N-(ethoxycarbonylmethyl)-6-methoxy-quinolinium bromide indicate that the resting [Cl-](i) is 1.6 times above the Cl- electrochemical equilibrium but is not influenced by pharmacological inhibition of the Na+-K+-2Cl(-) cotransporter (NKCC) and anion exchanger using bumetanide and 4,4'-diisothiocyanatodihydrostilbene-2,2'-disulfonic acid disodium salt. In contrast, rapid Cl- reuptake after extracellular Cl- removal is almost totally NKCC mediated both in the absence and presence of dopamine. However, in physiological saline [Cl-](i) does not change during dopamine stimulation although dopamine stimulates fluid secretion in these glands. On the other hand, dopamine causes a decrease in the sodium-binding benzofuran isophthalate tetra-ammonium salt (SBFI) fluorescence and an increase in the Sodium Green fluorescence after 2P excitation. This opposite behavior of both dyes suggests a dopamine-induced [Na+](i) rise in the acinar cells, which is supported by the determined 2P-action cross sections of SBFI. The [Na+](i) rise is Cl- dependent and inhibited by bumetanide. The Ca2+-ionophore ionomycin also causes a bumetanide-sensitive [Na+](i) rise. We propose that a Ca2+-mediated NKCC activity in acinar peripheral cells attributable to dopamine stimulation serves for basolateral Na+ uptake during saliva secretion and that the concomitantly transported Cl- is recycled back to the bath. KW - epithelial ion transport KW - Na+-K+-2Cl(-) cotransporter KW - MQAE KW - SBFI KW - 2P cross section Y1 - 2011 U6 - https://doi.org/10.1152/ajpcell.00320.2010 SN - 0363-6143 VL - 300 IS - 6 SP - C1323 EP - C1336 PB - American Chemical Society CY - Bethesda ER - TY - JOUR A1 - Cockburn, Robert A. A1 - Siegmann, Rebekka A1 - Payne, Kevin A. A1 - Beuermann, Sabine A1 - McKenna, Timothy F. L. A1 - Hutchinson, Robin A. T1 - Free Radical Copolymerization Kinetics of gamma-Methyl-alpha-methylene-gamma-butyrolactone (MeMBL) JF - Biomacromolecules : an interdisciplinary journal focused at the interface of polymer science and the biological sciences N2 - The propagation kinetics and copolymerization behavior of the biorenewable monomer gamma-methyl-alpha-methylene-gamma-butyrolactone (MeMBL) are studied using the Pulsed laser polymerization (PLP)/size exclusion chromatography (SEC) technique. The propagation rate coefficent for MeMBL is 15% higher than that of its structural analogue, methyl methacrylate (MMA), with a similar activation energy of 21.8 kJ . mol(-1). When compared to MMA, MeMBL is preferentially incorporated into copolymers when reacted with styrene (ST), MMA, and n-butyl acrylate (BA); the monomer reactivity ratios fit from bulk MeMBL/ST, MeMBL/MMA, and MeMBL/BA copolymerizations are r(MeMBL) = 0.80 +/- 0.04 and r(ST) = 0.34 +/- 0.04, r(MeMBL), = 3.0 +/- 0.3 and r(MMA) = 0.33 +/- 0.01, and r(MeMBL) = 7.0 +/- 2.0 and r(BA) = 0.16 +/- 0.03, respectively. In all cases, no significant variation with temperature was found between 50 and 90 degrees C. The implicit penultimate unit effect (IPUE) model was found to adequately fit the composition-averaged copolymerization propagation rate coefficient, k(p,cop), for the three systems. Y1 - 2011 U6 - https://doi.org/10.1021/bm200400s SN - 1525-7797 VL - 12 IS - 6 SP - 2319 EP - 2326 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Wessig, Pablo A1 - Pick, Charlotte T1 - Photochemical synthesis and properties of axially chiral naphthylpyridines JF - Journal of photochemistry and photobiology : A, Chemistry N2 - Five alkynyl pyridines were prepared and cyclized to naphthylpyridines as the main products in the course of a Photo-Dehydro-Diels-Alder reaction. Four of the final products are axially chiral and the determination of the rotational barrier by DFT calculations, dynamic NMR and H PLC experiments is demonstrated. (C) 2011 Elsevier B.V. All rights reserved. KW - Photochemistry KW - Axial chirality KW - Photo-Dehydro-Diels-Alder reaction KW - Dynamic NMR KW - Dynamic HPLC KW - Molecular modeling Y1 - 2011 U6 - https://doi.org/10.1016/j.jphotochem.2011.06.006 SN - 1010-6030 VL - 222 IS - 1 SP - 263 EP - 265 PB - Elsevier CY - Lausanne ER - TY - JOUR A1 - Kozlevcar, Bojan A1 - Gamez, Patrick A1 - de Gelder, Rene A1 - Jaglicic, Zvonko A1 - Strauch, Peter A1 - Kitanovski, Nives A1 - Reedijk, Jan T1 - Counterion and solvent effects on the primary coordination sphere of copper(II) Bis(3,5-dimethylpyrazol-1-yl)acetic acid coordination compounds JF - European journal of inorganic chemistry : a journal of ChemPubSoc Europe N2 - Four copper(II) coordination compounds with the neutral ligand bis(3,5-dimethylpyrazol-1-yl)acetic acid (Hbdmpza, C(12)H(16)N(4)O(2)) and its anionic form (bdmpza(-)), namely [Cu(Hbdmpza)(2)](HSO(4))(2) (1), [Cu(Hbdmpza)(2)]Cl(2) (2), [Cu(bdmpza)(2)](CH(3)COOH)(H(2)O) (3), and [Cu(bdmpza)(2)][Cu(2)(O(2)CCH(3))(4)] (4) have been synthesized starting from different metal salts. All the compounds have been fully characterized by physical and analytical methods. In addition, a single-crystal XRD analysis revealed the 3D structure of 1, which exhibits tridentate, vicinal N,N,O-coordination of two symmetry-related Hbdmpza ligands in an elongated octahedral arrangement with four equatorial nitrogen atoms and two axial oxygen atoms. The neutral carboxylic moiety acts as a hydrogen-bond donor to a HSO(4)(-) counterion. The two hydrogensulfates form a unique hydrogen-bonded pair (HSO(4)(-))(2) with very short O center dot center dot center dot O distances (2.59 angstrom) bridged between adjacent [Cu(HL)(2)](2+) coordination units. Also a short O center dot center dot center dot O contact (2.54 angstrom) is present between the C-OH and an 0 of a hydrogensulfate. A characteristic IR C=O vibration is observed at 1700 cm(-1) for 1 and 2, whereas the v(as)(O(2)C) vibration is present at 1650 cm(-1) for 3 and 4. These IR data strongly suggest the presence of Hbdmpza ligands in 1 and 2 and the deprotonated form bdmpza- in 3 and 4. A mononuclear coordination unit [CuL(2)], as proven for 1 by X-ray diffraction, is also proposed for the other compounds 2-4. In compound 4, an additional dinuclear [Cu(2)(O(2)CCH(3))(4)] neutral coordination unit is present, as deduced from the vibration bands v(as)(O(2)C) at 1600 cm(-1) and v(s)(O(2)C) at 1420 cm(-1), which are typical of a carboxylate function, and from the two-species analysis of the chi(M)T(T) curve of the magnetic susceptibility data (2J = -322 cm(-1)). Also, the EPR spectra recorded at different temperatures agree with this structure. KW - Copper KW - Coordination modes KW - Hydrogen bonds KW - Counterions KW - Solvent effects Y1 - 2011 U6 - https://doi.org/10.1002/ejic.201100410 SN - 1434-1948 IS - 24 SP - 3650 EP - 3655 PB - Wiley-Blackwell CY - Malden ER - TY - JOUR A1 - Radziuk, Darya A1 - Skirtach, Andre A1 - Gessner, Andre A1 - Kumke, Michael Uwe A1 - Zhang, Wei A1 - Möhwald, Helmuth A1 - Shchukin, Dmitry T1 - Ultrasonic Approach for Formation of Erbium Oxide Nanoparticles with Variable Geometries JF - Langmuir N2 - Ultrasound (20 kHz, 29 W. cm(-2)) is employed to form three types of erbium oxide nanoparticles in the presence of multiwalled carbon nanotubes as a template material in water. The nanoparticles are (i) erbium carboxioxide nanoparticles deposited on the external walls of multiwalled carbon nanotubes and Er(2)O(3) in the bulk with (ii) hexagonal and (iii) spherical geometries. Each type of ultrasonically formed nanoparticle reveals Er(3+) photoluminescence from crystal lattice. The main advantage of the erbium carboxioxide nanoparticles on the carbon nanotubes is the electromagnetic emission in the visible region, which is new and not examined up to the present date. On the other hand, the photoluminescence of hexagonal erbium oxide nanoparticles is long-lived (mu s) and enables the higher energy transition ((4)S(3/2)-(4)I(15/2)), which is not observed for spherical nanoparticles. Our work is unique because it combines for the first time spectroscopy of Er(3+) electronic transitions in the host crystal lattices of nanoparticles with the geometry established by ultrasound in aqueous solution of carbon nanotubes employed as a template material. The work can be of great interest for "green" chemistry synthesis of photoluminescent nanoparticles in water. Y1 - 2011 U6 - https://doi.org/10.1021/la203622u SN - 0743-7463 VL - 27 IS - 23 SP - 14472 EP - 14480 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Wessig, Pablo A1 - Wawrzinek, Robert A1 - Moellnitz, Kristian A1 - Feldbusch, Elvira A1 - Schilde, Uwe T1 - A new class of fluorescent dyes based on 1,3-benzodioxole and [1,3]-dioxolo[4.5-f]benzodioxole JF - Tetrahedron letters N2 - We report on synthesis and photophysical properties of a new class of fluorescent dyes. They are characterized by large Stokes-shifts, long fluorescence lifetimes in organic solvents and a pronounced dependency of the fluorescence lifetime on the solvent polarity. Also worthy of note is the high bleaching stability. To provide access to biochemical and medical applications a series of derivatives were prepared, which exhibit specific reactivity towards different biologically relevant functional groups (carboxylic acids, amines, maleimides, N-hydroxysuccinimide esters). Furthermore, two alkynes were prepared, which could be used in 'Click' chemistry. KW - Fluorescent dyes KW - Fluorescence lifetime KW - Large Stokes-shifts KW - Heterocycles Y1 - 2011 U6 - https://doi.org/10.1016/j.tetlet.2011.09.058 SN - 0040-4039 VL - 52 IS - 46 SP - 6192 EP - 6195 PB - Elsevier CY - Oxford ER - TY - JOUR A1 - Schmidt, Bernd A1 - Geissler, Diana T1 - Olefin-Metathesis-Based Synthesis of Furans by an RCM/Deprotonation/Phosphorylation Sequence and Their Diels-Alder Reactions JF - European journal of organic chemistry N2 - Butenolides, obtained by ring-closing metathesis (RCM) of acrylates, undergo quantitative deprotonation with amide bases. Trapping of the resulting anions with electrophiles, for example, chlorophosphates, give furans. Subsequent DielsAlder reaction and acid-catalysed rearrangement of the resulting oxabicyclonorbornadienes give substituted benzenes. KW - Lactones KW - Metathesis KW - Ruthenium KW - Oxygen heterocycles KW - Metalation Y1 - 2011 U6 - https://doi.org/10.1002/ejoc.201101078 SN - 1434-193X IS - 35 SP - 7140 EP - 7147 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Fechner, Mabya A1 - Koetz, Joachim T1 - Potentiometric behavior of Polyampholytes based on N,N'-diallyl-N,N'-dimethylammonium chloride and maleamic acid derivatives JF - Macromolecular chemistry and physics N2 - Strongly alternating copolymers (PalH, PalPh, PalPhBisCarb) composed of N,N'-diallyl-N,N'-dimethyl-ammonium chloride (DADMAC) and maleamic acid derivatives (MAD) are synthesized by a water-based free radical copolymerization using 4,4-azobis(4-cyanovaleric acid) (V501) as the initiator. The structure of the copolymers is verified by 1H-NMR, elemental analysis, and thermogravimetric measurements, and the physicochemical properties are investigated by viscometric and potentiometric techniques. Potentiometric titration curves show that the acidity of the carboxylic groups strongly depends on the degree of dissociation and the ionic strength. Since all copolymers behave as polycations at low degree of dissociation, a transition from an extended chain to a coil conformation can be identified by reaching the isoelectric point (IEP). KW - acidity constants KW - radical polymerization KW - polyampholytes KW - viscosity KW - conformational transitions Y1 - 2011 U6 - https://doi.org/10.1002/macp.201100532 SN - 1022-1352 VL - 212 IS - 24 SP - 2691 EP - 2699 PB - Wiley-Blackwell CY - Malden ER - TY - JOUR A1 - Kristen-Hochrein, Nora A1 - Laschewsky, André A1 - Miller, Reinhard A1 - von Klitzing, Regine T1 - Stability of foam Films of oppositely charged polyelectrolyte/surfactant mixtures - effect of isoelectric point JF - The journal of physical chemistry : B, Condensed matter, materials, surfaces, interfaces & biophysical chemistry N2 - In the present paper, the influence of the surfactant concentration and the degree of charge of a polymer on foam film properties of oppositely charged polyelectrolyte/surfactant mixtures has been investigated. To verify the assumption that the position of the isoelectric point (IEP) does not change the character of the foam film stabilities, the position of the IEP of the polyelectrolyte/surfactant mixtures has been shifted in two different ways. Within the first series of experiments, the foam. film properties were studied using a fixed surfactant concentration of 3 x 10(-5) M in the mixture. Due to the low surfactant concentration, this is a rather dilute system. In the second approach, a copolymer of nonionic and ionic monomer units was Used to lower the charge density of the polymer. This gave rise to additional interactions between the polyelectrolyte and the surfactant, which makes the description of the foam film behavior more complex. In both systems, the same characteristics of the foam film stabilities were found: The foam film stability is reduced toward the IEP of the system, followed by a destabilization around the IEP., At polyelectrolyte concentrations above the IEP, foam films are very stable. However, the concentration range where unstable films were formed was rather broad, and the mechanisms leading to the destabilization had different origins. The results were compared with former findings on PAMPS/C(14)TAB mixtures with an IEP of 10(-4)M.(1) Y1 - 2011 U6 - https://doi.org/10.1021/jp206964k SN - 1520-6106 VL - 115 IS - 49 SP - 14475 EP - 14483 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Kröner, Dominik A1 - Krüger, Hartmut A1 - Thesen, Manuel W. T1 - Electronic structure calculations for Hole-Transporting Triphenylamine Derivatives in Polymer Light-Emitting Diodes JF - Macromolecular theory and simulations N2 - Hole-transporting polymers based on polyethene-triphenylamine derivatives are investigated with respect to their UV/Vis spectra. Two substituents, N-phenyl-1-naphthylamine and carbazole, are examined as their respective polymer light-emitting diodes (PLEDs) show very different luminous efficiencies. In order to identify the origin of these phenomena electronic structure calculations based on TD-DFT were performed using monomer models of the hole-transporting polymers. In experiment these hole-transporting polymers show very specific differences in their absorption and emission (fluorescence and phosphorescence) spectra. The analysis of the simulated absorption and emission spectra, the MOs as well as the ground and excited state geometries give explanations for the different optical performances of the corresponding PLEDs. KW - charge transport KW - luminescence KW - organic light-emitting diodes KW - polystyrenes KW - quantum chemistry Y1 - 2011 U6 - https://doi.org/10.1002/mats.201100016 SN - 1022-1344 VL - 20 IS - 9 SP - 790 EP - 805 PB - Wiley-Blackwell CY - Malden ER - TY - JOUR A1 - Nikolaus, Jörg A1 - Czapla, Sylvia A1 - Möllnitz, Kristian A1 - Höfer, Chris T. A1 - Herrmann, Andreas A1 - Wessig, Pablo A1 - Müller, Peter T1 - New molecular rods - Characterization of their interaction with membranes JF - Biochimica et biophysica acta : Biomembranes N2 - Molecular rods are synthetical molecules consisting of a hydrophobic backbone which are functionalized with varying terminal groups. Here, we report on the interaction of a recently described new class of molecular rods with lipid and biological membranes. In order to characterize this interaction, different fluorescently labeled rods were synthesized allowing for the application of fluorescence spectroscopy and microscopy based approaches. Our data show that the rods are incorporated into membranes with a perpendicular orientation to the membrane surface and enrich preferentially in liquid-disordered lipid domains. These characteristics underline that rods can be applied as stable membrane-associated anchors for functionalizing membrane surfaces. KW - Molecular rod KW - Phospholipid KW - Lipid domain KW - Spiro compound Y1 - 2011 U6 - https://doi.org/10.1016/j.bbamem.2011.08.008 SN - 0005-2736 VL - 1808 IS - 12 SP - 2781 EP - 2788 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Zehm, Daniel A1 - Laschewsky, André A1 - Liang, Hua A1 - Rabe, Jürgen P. T1 - Straightforward access to amphiphilic dual bottle brushes by combining RAFT, ATRP, and NMP polymerization in one sequence JF - Macromolecules : a publication of the American Chemical Society N2 - Molecular brush diblock copolymers were synthesized by the orthogonal overlay of the RAFT (reversible addition-fragmentation chain transfer), the ATRP (atom transfer radical polymerization), and the NMP (nitroxide-mediated polymerization) techniques. This unique combination enabled the synthesis of the complex amphiphilic polymers without the need of postpolymerization modifications, using a diblock copolymer intermediate made from two selectively addressable inimers and applying a sequence of four controlled free radical polymerization steps in total. The resulting polymers are composed of a thermosensitive poly(N-isopropylacrylamide) brush as hydrophilic block and a polystyrene brush as hydrophobic block, thus translating the structure of the established amphiphilic diblock copolymers known as macro surfactants to the higher size level of "giant surfactants". The dual molecular brushes and the aggregates formed on ultra flat solid substrates were visualized by scanning force microscopy (SFM). Y1 - 2011 U6 - https://doi.org/10.1021/ma2015613 SN - 0024-9297 VL - 44 IS - 24 SP - 9635 EP - 9641 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Kröner, Dominik T1 - Chiral distinction by ultrashort laser pulses electron wavepacket dynamics incorporating magnetic interactions JF - The journal of physical chemistry : A, Molecules, spectroscopy, kinetics, environment & general theory N2 - The qualitative and quantitative distinction of enantiomers is one of the key issues in chemical analysis. In the last years, circular dichroism (CD) has been combined with laser ionization mass spectrometry (LIMS), applying resonance enhanced multiphoton ionization (REMPI) with ultrashort laser pulses. We present theoretical investigations on the CD in the populations of the first electronic excited state of the REMPI process, caused by the interaction of 3-methylcyclopentanone with either left or right circular polarized fs-laser pulses. For this we performed multistate laser driven many electron dynamics based on ab initio electronic structure calculations, namely, TD-CIS(D)/6-311++(2d,2p). For a theoretical description of these experiments, a complete description of the field-dipole correlation is mandatory, including both electric field electric dipole and magnetic field magnetic dipole interactions. The effect of various pulse parameters on the CD are analyzed and compared with experimental results to gain further understanding of the key elements for an optimal distinction of enantiomers. Y1 - 2011 U6 - https://doi.org/10.1021/jp207270s SN - 1089-5639 VL - 115 IS - 50 SP - 14510 EP - 14518 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Fudickar, Werner A1 - Linker, Torsten T1 - Reversible Photooxygenation of Alkynylanthracenes chemical generation of singlet oxygen under very mild conditions JF - Chemistry - a European journal KW - anthracenes KW - oxidation KW - peroxides KW - reversibility KW - singlet oxygen Y1 - 2011 U6 - https://doi.org/10.1002/chem.201102230 SN - 0947-6539 VL - 17 IS - 49 SP - 13661 EP - 13664 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Bland-Hawthorn, Joss A1 - Ellis, S. C. A1 - Leon-Saval, S. G. A1 - Haynes, R. A1 - Roth, Martin M. A1 - Löhmannsröben, Hans-Gerd A1 - Horton, A. J. A1 - Cuby, J. -G. A1 - Birks, T. A. A1 - Lawrence, J. S. A1 - Gillingham, P. A1 - Ryder, S. D. A1 - Trinh, C. T1 - A complex multi-notch astronomical filter to suppress the bright infrared sky JF - Nature Communications N2 - A long-standing and profound problem in astronomy is the difficulty in obtaining deep near-infrared observations due to the extreme brightness and variability of the night sky at these wavelengths. A solution to this problem is crucial if we are to obtain the deepest possible observations of the early Universe, as redshifted starlight from distant galaxies appears at these wavelengths. The atmospheric emission between 1,000 and 1,800 nm arises almost entirely from a forest of extremely bright, very narrow hydroxyl emission lines that varies on timescales of minutes. The astronomical community has long envisaged the prospect of selectively removing these lines, while retaining high throughput between them. Here we demonstrate such a filter for the first time, presenting results from the first on-sky tests. Its use on current 8 m telescopes and future 30 m telescopes will open up many new research avenues in the years to come. Y1 - 2011 U6 - https://doi.org/10.1038/ncomms1584 SN - 2041-1723 VL - 2 IS - 50 PB - Nature Publ. Group CY - London ER - TY - JOUR A1 - Yin, Jian A1 - Linker, Torsten T1 - Stereoselective diversity-oriented syntheses of functionalized saccharides from bicyclic carbohydrate 1,2-lactones JF - Tetrahedron N2 - Bicyclic carbohydrate 1,2-lactones have been synthesized in only two steps and high yields by saponification and subsequent cyclization from known malonate addition products to glycals. The gluco-configured lactone serves as an important precursor for diversity-oriented syntheses. Thus, stereoselective opening of the lactone ring was realized with various nucleophiles in the presence of Sc(OTf)(3). This enabled the introduction of different substituents at the anomeric position, to afford a broad variety of 1-functionalized carbohydrates. On the other hand, stereoselective alpha-substitution of the gluco-configured lactone with different electrophiles and subsequent ring opening gives a collection of 2-functionalized saccharides. More than 30 products have been isolated in analytically pure form, and their configurations were unequivocally established by various NMR methods. Thus, carbohydrate 1,2-lactones are attractive precursors for the stereoselective synthesis of diverse saccharides. KW - Carbohydrates KW - Lactones KW - Glycosides KW - Molecular diversity KW - Synthetic methods Y1 - 2011 U6 - https://doi.org/10.1016/j.tet.2011.01.069 SN - 0040-4020 VL - 67 IS - 13 SP - 2447 EP - 2461 PB - Elsevier CY - Oxford ER - TY - JOUR A1 - Vidadala, Srinivasa Rao A1 - Pimpalpalle, Tukaram M. A1 - Linker, Torsten A1 - Hotha, Srinivas T1 - Gold-Catalyzed reactions of 2-C-Branched carbohydrates mild glycosidations and selective anomerizations JF - European journal of organic chemistry N2 - 2-C-branched methyl glycosides react with various alcohols under gold catalysis to transglycosylated products. The method is applicable for the convenient synthesis of disaccharides. Without nucleophile a selective anomerization occurs, giving first access to alpha-configured 2-C-nitromethyl glycosides. The results are interesting for the mechanism of gold-catalyzed glycosidations. KW - Anomerization KW - Carbohydrates KW - Glycosidation KW - Gold KW - Synthetic methods Y1 - 2011 U6 - https://doi.org/10.1002/ejoc.201100134 SN - 1434-193X IS - 13 SP - 2426 EP - 2430 PB - Wiley-Blackwell CY - Malden ER - TY - JOUR A1 - Vukicevic, Radovan A1 - Beuermann, Sabine T1 - Fullerenes decorated with poly(vinylidene fluoride) JF - Macromolecules : a publication of the American Chemical Society N2 - Fullerenes decorated with poly(vinylidene fluoride) (PVDF) were synthesized in a three-step procedure: Iodine transfer polymerization of vinylidene fluoride with C(6)F(12)I(2) as the chain transfer agent was carried out in supercritical carbon dioxide to synthesize iodine-terminated PVDF, which was subsequently transformed to azide-terminated polymer. Finally, azide-terminated PVDF chains were attached to a fullerene core under microwave irradiation at 160 degrees C in 1.5 h. The materials were characterized by NMR, FT-IR, UV/vis, GPC, elemental analysis, and DSC. On average, 4-5 PVDF chains are attached to one C(60) moiety. FT-IR spectra and DSC measurements indicate that the polymer end groups strongly affect the crystallinity of the material. For PVDF with azide end groups and PVDF attached to fullerenes the fraction of the beta polymorph is dominant while alpha polymorphs are almost absent. Y1 - 2011 U6 - https://doi.org/10.1021/ma102754c SN - 0024-9297 VL - 44 IS - 8 SP - 2597 EP - 2603 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Weiss, Jan A1 - Laschewsky, André T1 - Temperature-induced self-assembly of triple-responsive triblock copolymers in aqueous solutions JF - Langmuir N2 - A series of triple-thermoresponsive triblock copolymers from poly(N-n-propylacrylamide) (PNPAM, A), poly(methoxydiethylene glycol acrylate) (PMDEGA, B), and poly(N-ethylacrylamide) (PNEAM, C) was synthesized by sequential reversible addition-fragmentation chain transfer polymerizations. Polymers of differing block sequences, ABC, BAC, and ACB, with increasing phase transition temperatures in the order A < B < C were prepared. Their aggregation behavior in dilute aqueous solution was investigated using dynamic light scattering, turbidimetry, and NMR spectroscopy. The self-organization of such polymers was found to dependent strongly on the block sequence. While polymers with a terminal low-LCST (lower critical solution temperature) block undergo aggregation above the first phase transition temperature at 20-25 degrees C, triblock copolymers with the low-LCST block in the middle show aggregation only above the second phase transition. The collapse of the middle block is not sufficient to induce aggregation but produces instead stable, unimolecular micelles with a collapsed middle block, as supported by NMR and fluorescence probe data. Continued heating of all copolymers led to two additional thermal transitions at 40-55 and 70-80 degrees C, which could be correlated to the phase transitions of the B and C blocks, respectively. All polymers show a high tendency for cluster formation, once aggregation is induced. The carrier abilities of the triple responsive triblock copolymers for hydrophobic agents were probed with the solvatochromic fluorescence dye Nile Red. With passing through the first thermal transition, the block copolymers are capable of solubilizing Nile Red. In the case of block copolymers with sequences ABC or ACB, which bear the low-LCST block at one terminus, notable amounts of dye are solubilized already at this stage. In contrast, the hydrophobic probe is much less efficiently incorporated by the BAC triblock copolymer, which forms unimolecular micelles. Only after the collapse of the B block, when reaching the second phase transition at about 45 degrees C, does aggregation occur and solubilization becomes efficient. In the case of ABC and ACB polymers, the hydrophobic probe seems to partition between the originally collapsed A chains and the additional hydrophobic chains formed after the collapse of the less hydrophobic B block. Y1 - 2011 U6 - https://doi.org/10.1021/la200115p SN - 0743-7463 VL - 27 IS - 8 SP - 4465 EP - 4473 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Idzik, Krzysztof Ryszard A1 - Cywinski, Piotr J. A1 - Cranfield, Charles G. A1 - Mohr, Gerhard J. A1 - Beckert, Rainer T1 - Molecular recognition of the antiretroviral drug abacavir towards the development of a novel carbazole-based fluorosensor JF - Journal of fluorescence N2 - Due to their optical and electro-conductive attributes, carbazole derivatives are interesting materials for a large range of biosensor applications. In this study, we present the synthesis routes and fluorescence evaluation of newly designed carbazole fluorosensors that, by modification with uracil, have a special affinity for antiretroviral drugs via either Watson-Crick or Hoogsteen base pairing. To an N-octylcarbazole-uracil compound, four different groups were attached, namely thiophene, furane, ethylenedioxythiophene, and another uracil; yielding four different derivatives. Photophysical properties of these newly obtained derivatives are described, as are their interactions with the reverse transcriptase inhibitors such as abacavir, zidovudine, lamivudine and didanosine. The influence of each analyte on biosensor fluorescence was assessed on the basis of the Stern-Volmer equation and represented by Stern-Volmer constants. Consequently we have demonstrated that these structures based on carbazole, with a uracil group, may be successfully incorporated into alternative carbazole derivatives to form biosensors for the molecular recognition of antiretroviral drugs. KW - HIV KW - HAART KW - Antiretroviral drugs KW - Carbazole KW - Base pairing KW - Fluorescence spectroscopy Y1 - 2011 U6 - https://doi.org/10.1007/s10895-010-0798-7 SN - 1053-0509 SN - 1573-4994 VL - 21 IS - 3 SP - 1195 EP - 1204 PB - Springer CY - New York ER - TY - JOUR A1 - Reznichenko, Alexander L. A1 - Emge, Thomas J. A1 - Audoersch, Stephan A1 - Klauber, Eric G. A1 - Hultzsch, Kai C. A1 - Schmidt, Bernd T1 - Group 5 metal binaphtholate complexes for catalytic asymmetric hydroaminoalkylation and hydroamination/cyclization JF - Organometallics N2 - 3,3'-Silylated binaphtholate tantalum and niobium complexes were shown to be efficient catalysts for the asymmetric hydroaminoalkylation of N-methylaniline derivatives and N-benzylmethylamine with simple alkenes in enantioselectivities of up to 80% ee. No hydroaminoalkylation was observed with aminoalkenes; rather, exclusive asymmetric hydroamination/cyclization took place in up to 81% ee. Y1 - 2011 U6 - https://doi.org/10.1021/om1011006 SN - 0276-7333 VL - 30 IS - 5 SP - 921 EP - 924 PB - American Chemical Society CY - Washington ER - TY - CHAP A1 - Vukicevic, Radovan A1 - Schreiber, Ulrike A1 - Beuermann, Sabine T1 - Azide-terminated poly(vinylidene fluoride) as building block for nanocomposite materials and block copolymers T2 - Abstracts of papers : joint conference / The Chemical Institute of Cananda, CIC, American Chemical Society, ACS Y1 - 2011 SN - 0065-7727 VL - 242 IS - 16 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Thuenemann, Andreas F. A1 - Klobes, Peter A1 - Wieland, Christoph A1 - Bruzzano, Stefano T1 - On the nanostructure of micrometer-sized cellulose beads JF - Analytical & bioanalytical chemistry N2 - The analysis of the porosity of materials is an important and challenging field in analytical chemistry. The gas adsorption and mercury intrusion methods are the most established techniques for quantification of specific surface areas, but unfortunately, dry materials are mandatory for their applicability. All porous materials that contain water and other solvents in their functional state must be dried before analysis. In this process, care has to be taken since the removal of solvent bears the risk of an incalculable alteration of the pore structure, especially for soft materials. In the present paper, we report on the use of small-angle X-ray scattering (SAXS) as an alternative analysis method for the investigation of the micro and mesopores within cellulose beads in their native, i.e., water-swollen state; in this context, they represent a typical soft material. We show that even gentle removal of the bound water reduces the specific surface area dramatically from 161 to 109 m(2) g(-1) in cellulose bead sample type MT50 and from 417 to 220 m(2) g(-1) in MT100. Simulation of the SAXS curves with a bimodal pore size distribution model reveals that the smallest pores with radii up to 10 nm are greatly affected by drying, whereas pores with sizes in the range of 10 to 70 nm are barely affected. The SAXS results were compared with Brunauer-Emmett-Teller results from nitrogen sorption measurements and with mercury intrusion experiments. KW - Small-angle X-ray scattering KW - Cellulose KW - Mesopores KW - Micropores KW - Porosimetry Y1 - 2011 U6 - https://doi.org/10.1007/s00216-011-5176-z SN - 1618-2642 VL - 401 IS - 4 SP - 1101 EP - 1108 PB - Springer CY - Heidelberg ER - TY - JOUR A1 - Moskalik, Mikail Yu. A1 - Shainyan, Bagrat A. A1 - Schilde, Uwe T1 - Reaction of trifluoromethanesulfonamide with alkenes and cycloocta-1,5-diene under oxidative conditions direct assembly of 9-heterobicyclo[4.2.1]nonanes JF - Russian journal of organic chemistry N2 - Reactions of trifluoromethanesulfonamide with alpha-methylstyrene, 2-methylpent-1-ene, and cycloocta-1,5-diene in the system t-BuOCl-NaI were studied. In the reaction with alpha-methylstyrene 1-iodo-2-phenylpropan-2-ol was the only isolated product. The reaction with 2-methylpent-1-ene gave a mixture of N,N'-(2-methylpentane-1,2-diyl)bis(trifluoromethanesulfonamide), trifluoro-N-(2-hydroxy-2-methylpentyl)-methanesulfonamide, and N,N'-[oxybis(2-methylpentan-2,1-diyl)]bis(trifluoromethanesulfonamide). Trifluoromethanesulfonamide reacted with cycloocta-1,5-diene to produce a mixture of 2,5-diiodo-9-(trifluoromethylsulfonyl)-9-azabicyclo[4.2.1]nonane and 2,5-diiodo-9-oxabicyclo[4.2.1]nonane; this reaction may be regarded as the first example of direct assembly of bicyclononane skeleton. Y1 - 2011 U6 - https://doi.org/10.1134/S1070428011090016 SN - 1070-4280 VL - 47 IS - 9 SP - 1271 EP - 1277 PB - Pleiades Publ. CY - New York ER - TY - JOUR A1 - Kreye, Oliver A1 - Toth, Tommy A1 - Meier, Michael A. R. T1 - Copolymers derived from rapeseed derivatives via ADMET and thiol-ene addition JF - European polymer journal N2 - Novel (co)polymers were synthesized from substances obtained from rapeseed via ADMET and thiol-ene additions. alpha,omega-Dienes derived from oleic and erucic acid were copolymerized with a ferulic acid derivative, a representative phenolic acid (p-hydroxycinnamic acid) present, for instance, in rapeseed cake. Copolymers with different ratios of these monomers were prepared via two different routes (ADMET and thiol-ene) and studied in detail. Both monomer and polymer synthesis were optimized in order to achieve high yielding synthetic procedures that meet the requirements of green chemistry. Some thermal properties of the resulting copolymer series were then studied and correlated to the co-monomer composition. KW - Rapeseed oil KW - Rapeseed cake KW - p-Hydroxycinnamic acids KW - alpha,omega-Dienes KW - ADMET polymerization KW - Thiol-ene addition Y1 - 2011 U6 - https://doi.org/10.1016/j.eurpolymj.2011.06.012 SN - 0014-3057 VL - 47 IS - 9 SP - 1804 EP - 1816 PB - Elsevier CY - Oxford ER - TY - JOUR A1 - Kienzler, Andrea A1 - Flehr, Roman A1 - Kramer, Rolf A. A1 - Gehne, Soeren A1 - Kumke, Michael Uwe A1 - Bannwarth, Willi T1 - Novel Three-Color FRET Tool Box for Advanced Protein and DNA Analysis JF - Bioconjugate chemistry N2 - We report on a new three-color FRET system which we were able to verify in peptides as well as in synthetic DNA. All three chromophores could be introduced by a building block approach avoiding postsynthetic labeling. Additional features are robustness, matching spectroscopic properties, high-energy transfer, and sensitivity. The system was investigated in detail on a set of peptides as well as an array of tailored oligonucleotides. The detailed analysis of the experimental data and comparison with theoretical considerations were in excellent agreement. It is shown that in the case of polypeptides specific interaction with the fluorescence probes has to be considered. In contrast with DNA, the fluorescence probes did not show any indications of such interactions. The novel three-color FRET toolbox revealed the potential for applications studying fundamental processes of three interacting molecules in life science applications. Y1 - 2011 U6 - https://doi.org/10.1021/bc2002659 SN - 1043-1802 VL - 22 IS - 9 SP - 1852 EP - 1863 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Wessig, Pablo A1 - Pick, Charlotte A1 - Schilde, Uwe T1 - First example of an atropselective dehydro-Diels-Alder (ADDA) reaction JF - Tetrahedron letters N2 - A new concept of a stereoselective synthesis of axially chiral biaryls, formed in the course of the dehydro-Diels-Alder (DDA) reaction, has been disclosed. It is based on asymmetric induction of the newly formed chirality axis by a chirality center, which is present in the two synthesized DDA reactants. Depending on the different length of the linkers joining the alkyne moieties the DDA reaction may be triggered photochemically or thermally, where only the thermal variant was stereoselective. KW - Cycloaddition KW - Atropselecrivity KW - Biaryls KW - Alkynes KW - Photochemistry Y1 - 2011 U6 - https://doi.org/10.1016/j.tetlet.2011.06.024 SN - 0040-4039 VL - 52 IS - 32 SP - 4221 EP - 4223 PB - Elsevier CY - Oxford ER - TY - CHAP A1 - Schreiber, Ulrike A1 - Vukicevic, Radovan A1 - Beuermann, Sabine T1 - Block copolymers of poly(vinylidene fluoride) obtained via 1,3 dipolar cycloaddition T2 - Abstracts of papers : joint conference / The Chemical Institute of Cananda, CIC, American Chemical Society, ACS Y1 - 2011 SN - 0065-7727 VL - 242 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Schmidt, Bernd A1 - Geissler, Diana T1 - Ru- and Pd-Catalysed Synthesis of 2-Arylfurans by One-Flask Heck Arylation/Oxidation JF - European journal of organic chemistry N2 - 2,5-Disubstituted furans were synthesized by one-flask Heck arylation/oxidation sequences. The starting materials are 2-substituted 2,3-dihydrofurans, conveniently available by RCM/isomerization sequences, and arenediazonium salts. These react in ligand-free Heck reactions to afford 2,5-disub-stituted 2,5-dihydrofurans, which are oxidized to the corresponding furans without isolation or intermediate workup. The oxidation is conveniently achieved with chloranil or DDQ, depending on the substrate. KW - Diazonium salts KW - Palladium KW - C-C coupling KW - Heck coupling KW - Furans KW - Oxidation KW - Oxygen heterocycles Y1 - 2011 U6 - https://doi.org/10.1002/ejoc.201100549 SN - 1434-193X IS - 25 SP - 4814 EP - 4822 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Schmidt, Bernd A1 - Staude, Lucia A1 - Kelling, Alexandra A1 - Schilde, Uwe T1 - A Cross-Metathesis-Conjugate addition route to enantiopure gamma-Butyrolactams and gamma-Lactones from a C-2-Symmetric Precursor JF - European journal of organic chemistry N2 - A protected derivative of (3R, 4R)-hexa-1,5-diene-3,4-diol, a conveniently accessible C-2-symmetric building block, undergoes single or double cross metathesis with methyl acryl-ate. The cross metathesis products are amenable to stereoselective conjugate addition reactions and can be converted into either gamma-butyrolactones or gamma-lactams. KW - Lactams KW - Lactones KW - Oxygen heterocycles KW - Metathesis KW - Desymmetrization Y1 - 2011 U6 - https://doi.org/10.1002/ejoc.201001528 SN - 1434-193X IS - 9 SP - 1721 EP - 1727 PB - Wiley-Blackwell CY - Malden ER - TY - JOUR A1 - Vijayakrishnan, Balakumar A1 - Issaree, Arisara A1 - Corilo, Yuri E. A1 - Ferreira, Christina Ramires A1 - Eberlin, Marcos N. A1 - Peter, Martin G. T1 - MSn of the six isomers of (GlcN)(2)(GlcNAc)(2) aminoglucan tetrasaccharides (diacetylchitotetraoses) rules of fragmentation for the sodiated molecules and application to sequence analysis of hetero-chitooligosaccharides JF - Carbohydrate polymers : an international journal devoted to scientific and technological aspects of industrially important polysaccharides N2 - The six possible isomers of di-N-acetylchitotetraoses [AADD, ADDA, ADAD, DADA, DAAD, and DDAA, where D stands for 2-amino-2-deoxy-3-D-glucose (GlcN) and A for 2-acetamido-2-deoxy-beta-D-glucose (GlcNAc)] were analyzed by ESI(+)-MSn. Collision induced dissociation via MSn experiments were performed for the sodiated molecules of m/z 769 [M+Na](+) for each isomer, and fragments were generated mainly by glycosidic bond and cross-ring cleavages. Rules of fragmentation were then established. A reducing end D residue yields the (O.2)A(4) cross-ring [M-59+Na](+) fragment of m/z 710 as the most abundant, whereas isomers containing a reducing end A prefer to lose water to form the [M-18+Na](+) ion of m/z 751, as well as abundant (O.2)A(4) cross-ring [M-101+Na](+) fragments of m/z 668 and B-3 [M-221+Na](+) ions of m/z 548. MS3 of C- and Y-type ions shows analogous fragmentation behaviour that allows identification of the reducing end next-neighbour residue. Due to gas-phase anchimeric assistance, B-type cleavage between the glycosidic oxygen and the anomeric carbon atom is favoured when the glycon is an A residue. Relative ion abundances are generally in the order B >> C > Y, but may vary depending on the next neighbour towards the non-reducing end. These fragmentation rules were used for partial sequence analysis of hetero-chitooligosaccharides of the composition D(2)A(3), D(3)A(3), D(2)A(4), D(4)A(3), and D(3)A(4). KW - Chitosan KW - Fragmentation KW - Oligosaccharides KW - Sequence analysis KW - Tandem mass spectrometry Y1 - 2011 U6 - https://doi.org/10.1016/j.carbpol.2010.04.041 SN - 0144-8617 VL - 84 IS - 2 SP - 713 EP - 726 PB - Elsevier CY - Oxford ER - TY - JOUR A1 - Mengibar, M. A1 - Ganan, M. A1 - Miralles, B. A1 - Carrascosa, A. V. A1 - Martinez-Rodriguez, Adolfo J. A1 - Peter, Martin G. A1 - Heras, A. T1 - Antibacterial activity of products of depolymerization of chitosans with lysozyme and chitosanase against Campylobacter jejuni JF - Carbohydrate polymers : an international journal devoted to scientific and technological aspects of industrially important polysaccharides N2 - Chitosan has several biological properties useful for the food industry, but the most attractive is its potential use as a food preservative of natural origin due to its antimicrobial activity against a wide range of food-borne microorganisms. Among food-borne pathogens, Campylobacter jejuni and related species are recognised as the most common causes of bacterial food-borne diarrhoeal disease throughout the world. Recently, it has been demonstrated that campylobacters are highly sensitive to chitosan. Even though chitosan is known to have important functional activities, poor solubility makes them difficult to use in food and biomedical applications. Unlike chitosan, the low viscosity and good solubility of chitosan oligosaccharides (COS) make them especially attractive in an important number of useful applications. In the present work, the effect of different COS on C. jejuni was investigated. Variables such as the physicochemical characteristics of chitosan and the enzyme used in COS preparation were studied. The COS had been fractioned using ultrafiltration membranes and each fraction was characterized regarding its FA and molecular weight distribution. It has been demonstrated that the biological properties of COS on Campylobacter depend on the composition of the fraction analysed. COS prepared by enzymatic hydrolysis with chitosanase were more active against Campylobacter that lysozyme-derived COS, and this behaviour seems to be related with the acetylation of the chains. On the other hand. the 10-30 kDa fraction was the most active COS fraction, independently of the enzyme used for the hydrolysis. These results have shown that COS could be useful as antimicrobial in the control of C. jejuni. KW - Campylobacter jejuni KW - Chitooligosaccharides KW - Chitosanase KW - Lysozyme KW - Depolymerization Y1 - 2011 U6 - https://doi.org/10.1016/j.carbpol.2010.04.042 SN - 0144-8617 VL - 84 IS - 2 SP - 844 EP - 848 PB - Elsevier CY - Oxford ER - TY - JOUR A1 - Wessig, Pablo A1 - Matthes, Annika T1 - Preparation of Strained Axially Chiral (1,5)Naphthalenophanes by Photo-dehydro-Diels-Alder Reaction JF - Journal of the American Chemical Society N2 - The preparation of 10 (1,5)naphthalenophanes (10a-j) by photo-dehydro-Diels-Alder (PDDA) reaction is described. Owing to hindered rotation around the biaryl axis, compounds 10 are axially chiral and the separation of enantiomers by chiral HPLC was demonstrated in three cases (10a,b,e). The absolute configuration of the isolated enantiomers could be unambiguously determined by comparison of calculated and measured circular dichroism (CD) spectra. Furthermore, we analyzed ring strain phenomena of (1,5)naphthalenophanes 10. Depending on the length of the linker units, one can distinguish three classes of naphthalenophanes. Compounds 10a-c are highly strained (E-STR = 7-31 kcal/mol), and the strain is caused by small bond angles in the linker unit and deformation of the naphthalene moiety. Another type of strain is observed if the linker unit becomes relatively long (10g,h) originating from transannular interactions and is comparable with the well-known strain of medium sized rings. The naphthalenophanes 10d-f with a linker length of 10-14 atoms are only marginally strained. To clearly discriminate the different sources of strain, we defined two geometrical parameters (average central dihedral angle delta(C) and naphthalene thickness D-N) and demonstrated that they are well-suited to indicate naphthalene deformation of our naphthalenophanes 10 as well as of ten model naphthalenophanes (I-X) with different linker lengths and linking positions. Y1 - 2011 U6 - https://doi.org/10.1021/ja109118m SN - 0002-7863 VL - 133 IS - 8 SP - 2642 EP - 2650 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Neumann, Mike A1 - Noeske, Robert A1 - Bach, Grete A1 - Glaubauf, Thomas A1 - Bartoszek, Michael A1 - Strauch, Peter T1 - A procedure for rapid determination of the silicon content in plant materials JF - Zeitschrift für Naturforschung : B, Chemical sciences N2 - An efficient, reliable and low-cost procedure to determine the silicon content in plant material is presented which allows to monitor the agricultural aspects like growth and yield. The presented procedure consists of a hydrochloric acid pre-treatment and a subsequent thermal oxidation. The method is compared to other processes like dissolution in hydrofluoric acid combined with ICP OES, energy-dispersive X-ray fluorescence spectroscopy (EDXRF) or aqua regia treatment. KW - Silica Determination KW - Silicon Content KW - Plant Material Y1 - 2011 SN - 0932-0776 VL - 66 IS - 3 SP - 289 EP - 294 PB - De Gruyter CY - Tübingen ER - TY - JOUR A1 - Kreye, Oliver A1 - Toth, Tommy A1 - Meier, Michael A. R. T1 - Introducing multicomponent reactions to polymer science passerini reactions of renewable monomers JF - Journal of the American Chemical Society N2 - Combination of the Passerini three component-reaction (3CR) and olefin metathesis led to the formation of poly[1-(alkyl carbamoyl)alkyl alkanoates], a new class of polyesters with amide moieties in their side chain, from renewable resources. Two different approaches were studied and compared to each other. First, monomers were synthesized by the Passerini-3CR and then polymerized via acyclic diene metathesis. Alternatively, bifunctional monomers were synthesized by self-metathesis and then polymerized by Passerini-3CR. Both approaches led to the formation of high-molecular-weight polymers. Moreover, Passerini-3CRs were shown to be a versatile grafting-onto method. The results clearly demonstrate that the Passerini-3CR offers an interesting new access to monomers and polymers and thus broadens the synthetic portfolio of polymer science. Y1 - 2011 U6 - https://doi.org/10.1021/ja1113003 SN - 0002-7863 VL - 133 IS - 6 SP - 1790 EP - 1792 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Huber, Christian A1 - Klamroth, Tillmann T1 - Explicitly time-dependent coupled cluster singles doubles calculations of laser-driven many-electron dynamics JF - The journal of chemical physics : bridges a gap between journals of physics and journals of chemistr N2 - We report explicitly time-dependent coupled cluster singles doubles (TD-CCSD) calculations, which simulate the laser-driven correlated many-electron dynamics in molecular systems. Small molecules, i.e., HF, H(2)O, NH(3), and CH(4), are treated mostly with polarized valence double zeta basis sets. We determine the coupled cluster ground states by imaginary time propagation for these molecules. Excited state energies are obtained from the Fourier transform of the time-dependent dipole moment after an ultrashort, broadband laser excitation. The time-dependent expectation values are calculated from the complex cluster amplitudes using the corresponding configuration interaction singles doubles wave functions. Also resonant laser excitations of these excited states are simulated, in order to explore the limits for the numerical stability of our current TD-CCSD implementation, which uses time-independent molecular orbitals to form excited configurations. Y1 - 2011 U6 - https://doi.org/10.1063/1.3530807 SN - 0021-9606 VL - 134 IS - 5 PB - American Institute of Physics CY - Melville ER - TY - JOUR A1 - Havelius, Kajsa G. V. A1 - Reschke, Stefan A1 - Horn, Sebastian A1 - Doerlng, Alexander A1 - Niks, Dimitri A1 - Hille, Russ A1 - Schulzke, Carola A1 - Leimkühler, Silke A1 - Haumann, Michael T1 - Structure of the molybdenum site in YedY, a sulfite oxidase homologue from escherichia coli JF - Inorganic chemistry N2 - YedY from Escherichia coil is a new member of the sulfite oxidase family of molybdenum cofactor (Moco)-containing oxidoreductases. We investigated the atomic structure of the molybdenum site in YedY by X-ray absorption spectroscopy, in comparison to human sulfite oxidase (hSO) and to a Mo(IV) model complex. The K-edge energy was indicative of Mo(V) in YedY, in agreement with X- and Q-band electron paramagnetic resonance results, whereas the hSO protein contained Mo(VI). In YedY and hSO, molybdenum is coordinated by two sulfur ligands from the molybdopterin ligand of the Moco, one thiolate sulfur of a cysteine (average Mo-S bond length of similar to 2.4 angstrom), and one (axial) oxo ligand (Mo=O, similar to 1.7 angstrom). hSO contained a second oxo group at Mo as expected, but in YedY, two species in about a 1:1 ratio were found at the active site, corresponding to an equatorial Mo-OH bond (similar to 2.1 angstrom) or possibly to a shorter M-O(-) bond. Yet another oxygen (or nitrogen) at a similar to 2.6 angstrom distance to Mo in YedY was identified, which could originate from a water molecule in the substrate binding cavity or from an amino acid residue close to the molybdenum site, i.e., Glu104, that is replaced by a glycine in hSO, or Asn45. The addition of the poor substrate dimethyl sulfoxide to YedY left the molybdenum coordination unchanged at high pH. In contrast, we found indications that the better substrate trimethylamine N-oxide and the substrate analogue acetone were bound at a similar to 2.6 angstrom distance to the molybdenum, presumably replacing the equatorial oxygen ligand. These findings were used to interpret the recent crystal structure of YedY and bear implications for its catalytic mechanism. Y1 - 2011 U6 - https://doi.org/10.1021/ic101291j SN - 0020-1669 VL - 50 IS - 3 SP - 741 EP - 748 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Yarman, Aysu A1 - Nagel, Thomas A1 - Gajovic-Eichelmann, Nenad A1 - Fischer, Anna A1 - Wollenberger, Ursula A1 - Scheller, Frieder W. T1 - Bioelectrocatalysis by Microperoxidase-11 in a Multilayer Architecture of Chitosan Embedded Gold Nanoparticles JF - Electroanalysis : an international journal devoted to fundamental and practical aspects of electroanalysis N2 - We report on the redox behaviour of the microperoxidase-11 (MP-11) which has been electrostatically immobilized in a matrix of chitosan-embedded gold nanoparticles on the surface of a glassy carbon electrode. MP-11 contains a covalently bound heme c as the redox active group that exchanges electrons with the electrode via the gold nanoparticles. Electroactive surface concentration of MP-11 at high scan rate is between 350+/-50 pmol cm(-2), which reflects a multilayer process. The formal potential (E degrees') of MP-11 in the gold nanoparticles-chitosan film was estimated to be -(267.7+/-2.9) mV at pH 7.0. The heterogeneous electron transfer rate constant (k(s)) starts at 1.21 s(-1) and levels off at 6.45 s(-1) in the scan rate range from 0.1 to 2.0 V s(-1). Oxidation and reduction of MP-11 by hydrogen peroxide and superoxide, respectively have been coupled to the direct electron transfer of MP-11. KW - Microperoxidase KW - Direct electron transfer KW - Nanoparticles KW - Hydrogen peroxide KW - Superoxide KW - Bioelectrocatalysis Y1 - 2011 U6 - https://doi.org/10.1002/elan.201000535 SN - 1040-0397 VL - 23 IS - 3 SP - 611 EP - 618 PB - Wiley-Blackwell CY - Malden ER - TY - JOUR A1 - Kreye, Oliver A1 - Toth, Tommy A1 - Meier, Michael A. R. T1 - Poly-alpha,beta-unsaturated aldehydes derived from castor oil via ADMET polymerization JF - European journal of lipid science and technology N2 - 10-Undecenal, derived by pyrolysis and reduction from castor oil, was almost quantitatively transformed into the corresponding aldol condensation product under basic conditions. This alpha,omega-diene monomer was polymerized using acyclic diene metathesis (ADMET) polymerization. In a catalyst screening, four of nine different ruthenium-based metathesis catalysts showed good reactivity under neat conditions at 80 degrees C in the presence of 1,4-benzoquinone and polymers with molecular weights up to 11 kDa were formed. Furthermore, the (1)H NMR spectra showed that the metathesis catalysts tolerate the alpha,beta-unsaturated aldehyde function and due to the addition of benzoquinone, the degree of double bond isomerization was low. Further experiments investigating reduced catalyst amounts (down to 0.2 mol%) and the temperature dependence of these ADMET polymerizations gave also satisfying results for the formation of poly-alpha,beta-unsaturated aldehydes. Moreover, ADMET polymerizations with different amounts of methyl 10-undecenoate as chain-stopper were performed and the integrals of the corresponding (1)H NMR spectra allowed the determination of an absolute degree of polymerization. Finally, a reduction of a poly-alpha,beta-unsaturated aldehyde with sodium borohydride was accomplished. The resulting poly-(allyl alcohol) could be a useful compound in the generation of polymer networks like polyesters, polyurethanes, and polycarbonates and thus be of high interest in materials research. KW - ADMET KW - Aldol condensation KW - Castor oil KW - Poly(allyl alcohol)s KW - Poly-alpha,beta-unsaturated aldehydes Y1 - 2011 U6 - https://doi.org/10.1002/ejlt.201000108 SN - 1438-7697 VL - 113 IS - 1 SP - 31 EP - 38 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Biermann, Ursula A1 - Meier, Michael A. R. A1 - Butte, Werner A1 - Metzger, Jürgen O. T1 - Cross-metathesis of unsaturated triglycerides with methyl acrylate synthesis of a dimeric metathesis product JF - European journal of lipid science and technology N2 - Highly functionalized dimeric triglycerides, such as compound 2, are obtained as minor products besides branched macromolecules from the acyclic triene metathesis (ATMET) polymerization of unsaturated triglycerides such as glyceryl triundec-10-enoate 1 and methyl acrylate (MA) in the presence of the second generation Hoveyda-Grubbs catalyst. The formed amount of interesting products of lower molecular weight during the ATMET reaction depends on the ratio of MA and triglyceride, reaction time, and temperature. We isolated the dimeric metathesis product 2 and synthesized the respective partially hydrogenated dimer 3 regioselectivly in a seven step reaction sequence starting from 10-undecenoic acid 7 and glycerol. Product 3 was unambiguously characterized by (13)C and (1)H NMR and MS as well as the further intermediate products of the seven step reaction including 10,11 bromo-undecanoic acid 8, the respective brominated 1,3-diglyceride 9, the brominated 1,3-triglyceride 6, and the self-metathesis products 4 and 5 which were isolated and purified. KW - Highly functionalized dimeric triglycerides KW - Olefin self- and cross-metathesis KW - Renewable resources Y1 - 2011 U6 - https://doi.org/10.1002/ejlt.201000109 SN - 1438-7697 VL - 113 IS - 1 SP - 39 EP - 45 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Schmidt, Bernd A1 - Hölter, Frank T1 - Suzuki-Miyaura cross coupling reactions with Phenoldiazonium salts JF - Organic & biomolecular chemistry : an international journal of synthetic, physical and biomolecular organic chemistry N2 - The Suzuki-Miyaura coupling of phenol diazonium salts and aryl trifluoroborates yields 4-hydroxybiaryls in a protecting group-free synthesis. Y1 - 2011 U6 - https://doi.org/10.1039/c1ob05256j SN - 1477-0520 VL - 9 IS - 13 SP - 4914 EP - 4920 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Wessig, Pablo A1 - Matthes, Annika A1 - Pick, Charlotte T1 - The photo-dehydro-Diels-Alder (PDDA) reaction JF - Organic & biomolecular chemistry : an international journal of synthetic, physical and biomolecular organic chemistry N2 - The photo-dehydro-Diels-Alder (PDDA) reaction is a valuable extension of the classical Diels-Alder (DA) reaction. The PDDA reaction differs from the DA reaction by the replacement of one of the C-C-double bonds of the diene moiety by a C-C triple bond and by the photochemical triggering of the reaction. This entails that, in contrast to the DA reaction, the PDDA reaction proceeds according to a multistage mechanism with biradicals and cycloallenes as intermediates. The PDDA reaction provides access to a considerable variety of compound classes. For example, 1-phenylnaphthlenes, 1,1'-binaphthyls, N-heterocyclic biaryls, and naphthalenophanes could be obtained by this reaction. Y1 - 2011 U6 - https://doi.org/10.1039/c1ob06066j SN - 1477-0520 VL - 9 IS - 22 SP - 7599 EP - 7605 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Wischerhoff, Erik A1 - Badi, Nezha A1 - Laschewsky, André A1 - Lutz, Jean-Francois ED - Börner, Hans Gerhard ED - Lutz, JF T1 - Smart polymer surfaces concepts and applications in biosciences JF - Advances in polymer science = Fortschritte der Hochpolymeren-Forschung JF - Advances in Polymer Science N2 - Stimuli-responsive macromolecules (i.e., pH-, thermo-, photo-, chemo-, and bioresponsive polymers) have gained exponential importance in materials science, nanotechnology, and biotechnology during the last two decades. This chapter describes the usefulness of this class of polymer for preparing smart surfaces (e.g., modified planar surfaces, particles surfaces, and surfaces of three-dimensional scaffolds). Some efficient pathways for connecting these macromolecules to inorganic, polymer, or biological substrates are described. In addition, some emerging bioapplications of smart polymer surfaces (e.g., antifouling surfaces, cell engineering, protein chromatography, tissue engineering, biochips, and bioassays) are critically discussed. KW - Antifouling surfaces KW - Bioactive surfaces KW - Biocompatible polymers KW - Bioseparation KW - Cell engineering KW - Polymer-modified surfaces KW - Stimuli-responsive polymers Y1 - 2011 SN - 978-3-642-20154-7 U6 - https://doi.org/10.1007/12_2010_88 SN - 0065-3195 VL - 240 IS - 1 SP - 1 EP - 33 PB - Springer CY - Berlin ER - TY - JOUR A1 - Horsch, Philipp A1 - Urbasch, Gunter A1 - Weitzel, Karl-Michael A1 - Kroener, Dominik T1 - Circular dichroism in ion yields employing femtosecond laser ionization-the role of laser pulse duration JF - Physical chemistry, chemical physics : a journal of European Chemical Societies N2 - The circular dichroism (CD) induced by femtosecond laser pulse excitation of 3-methylcyclopentanone has been investigated by means of experiment and theory as a function of the laser pulse duration. In the experiment the CD in ion yields is measured by femtosecond laser ionization via a one-photon resonant excited state. In the theoretical part the CD is calculated by solving laser driven quantum electron dynamics for the same resonant excitation based on ab initio electronic structure calculations employing a complete description of the electric field-electric dipole and magnetic field-magnetic dipole interactions. Both the experimentally measured CD in ion yields and the calculated CD in excited state populations exhibit a marked increase of the CD for pulse duration increasing from 50 fs to about 200 fs. Beyond 200 fs pulse duration the CD levels off. The combination of experimental and theoretical evidences indicates that the CD decreases with increasing laser intensity connected to the increased coupling between the excited states. Y1 - 2011 U6 - https://doi.org/10.1039/c0cp01903h SN - 1463-9076 VL - 13 IS - 6 SP - 2378 EP - 2386 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Dodoo, S. A1 - Steitz, R. A1 - Laschewsky, André A1 - von Klitzing, Regine T1 - Effect of ionic strength and type of ions on the structure of water swollen polyelectrolyte multilayers JF - Physical chemistry, chemical physics : a journal of European Chemical Societies N2 - This study addresses the effect of ionic strength and type of ions on the structure and water content of polyelectrolyte multilayers. Polyelectrolyte multilayers of poly(sodium-4-styrene sulfonate) (PSS) and poly(diallyl dimethyl ammonium chloride) (PDADMAC) prepared at different NaF, NaCl and NaBr concentrations have been investigated by neutron reflectometry against vacuum, H2O and D2O. Both thickness and water content of the multilayers increase with increasing ionic strength and increasing ion size. Two types of water were identified, "void water" which fills the voids of the multilayers and does not contribute to swelling but to a change in scattering length density and "swelling water" which directly contributes to swelling of the multilayers. The amount of void water decreases with increasing salt concentration and anion radius while the amount of swelling water increases with salt concentration and anion radius. This is interpreted as a denser structure in the dry state and larger ability to swell in water (sponge) for multilayers prepared from high ionic strengths and/or salt solution of large anions. No exchange of hydration water or replacement of H by D was detected even after eight hours incubation time in water of opposing isotopic composition. Y1 - 2011 U6 - https://doi.org/10.1039/c0cp01357a SN - 1463-9076 VL - 13 IS - 21 SP - 10318 EP - 10325 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Tiseanu, Carmen A1 - Parvulescu, Vasile I. A1 - Boutonnet, Magali A1 - Cojocaru, Bogdan A1 - Primus, Philipp A. A1 - Teodorescu, Cristian M. A1 - Solans, Conchita A1 - Sanchez Dominguez, Margarita T1 - Surface versus volume effects in luminescent ceria nanocrystals synthesized by an oil-in-water microemulsion method JF - Physical chemistry, chemical physics : a journal of European Chemical Societies N2 - Pure and europium (Eu3+) doped cerium dioxide (CeO2) nanocrystals have been synthesized by a novel oil-in-water microemulsion reaction method under soft conditions. In-situ X-ray diffraction and RAMAN spectroscopy, high-resolution transmission electron microscopy, UV/Vis diffuse-reflectance and Fourier transform infrared spectroscopy as well as time-resolved photoluminescence spectroscopy were used to characterize the nanaocrystals. The as-synthesized powders are nanocrystalline and have a narrow size distribution centered on 3 nm and high surface area of similar to 250 m(2) g(-1). Only a small fraction of the europium ions substitutes for the bulk, cubic Ce4+ sites in the europium-doped ceria nanocrystals. Upon calcination up to 1000 degrees C, a remarkable high surface area of similar to 120 m(2) g (-1) is preserved whereas an enrichment of the surface Ce4+ relative to Ce3+ ions and relative strong europium emission with a lifetime of similar to 1.8 ms and FWHM as narrow as 10 cm(-1) are measured. Under excitation into the UV and visible spectral range, the europium doped ceria nanocrystals display a variable emission spanning the orange-red wavelengths. The tunable emission is explained by the heterogeneous distribution of the europium dopants within the ceria nanocrystals coupled with the progressive diffusion of the europium ions from the surface to the inner ceria sites and the selective participation of the ceria host to the emission sensitization. Effects of the bulk-doping and impregnation with europium on the ceria host structure and optical properties are also discussed. Y1 - 2011 U6 - https://doi.org/10.1039/c1cp21135h SN - 1463-9076 VL - 13 IS - 38 SP - 17135 EP - 17145 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Schmidt, Bernd A1 - Krehl, Stefan T1 - A single precatalyst tandem RCM-allylic oxidation sequence JF - Chemical communications N2 - Ring closing metathesis of allyloxy styrenes and a subsequent Ru-catalyzed allylic oxidation can be combined to a tandem sequence that makes coumarins accessible using less active but more conveniently available first generation catalysts. Y1 - 2011 U6 - https://doi.org/10.1039/c1cc11347j SN - 1359-7345 VL - 47 IS - 20 SP - 5879 EP - 5881 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Pimpalpalle, Tukaram M. A1 - Vidadala, Srinivasa Rao A1 - Hotha, Srinivas A1 - Linker, Torsten T1 - Lewis acid-catalyzed stereoselective lactonization and subsequent glycosidation of 2-C-malonyl carbohydrates JF - Chemical communications N2 - Gold(III) bromide is a suitable catalyst for the stereoselective cyclization of 2-C-malonyl carbohydrates to the anomeric center under retention of one ester group. Reopening of the lactones with alcohols in the presence of TMSOTf affords allyl, propargyl and benzyl glycosides with high alpha-selectivity. Y1 - 2011 U6 - https://doi.org/10.1039/c1cc13425f SN - 1359-7345 VL - 47 IS - 37 SP - 10434 EP - 10436 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Mutlu, Hatice A1 - de Espinosa, Lucas Montero A1 - Meier, Michael A. R. T1 - Acyclic diene metathesis a versatile tool for the construction of defined polymer architectures JF - Chemical Society reviews N2 - Two decades have passed since the metathesis polymerisation of alpha,omega-dienes was successfully demonstrated by the group of Wagener and the term acyclic diene metathesis (ADMET) polymerisation was coined. Since then, the advances of metathesis chemistry have allowed to expand the scope of this versatile polymerisation reaction that nowadays finds applications in different fields, such as polymer, material, or medicinal chemistry. This critical review provides an insight into the historical aspects of ADMET and a detailed overview of the work done to date applying this versatile polymerisation reaction (221 references). Y1 - 2011 U6 - https://doi.org/10.1039/b924852h SN - 0306-0012 VL - 40 IS - 3 SP - 1404 EP - 1445 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Licausi, Francesco A1 - Giorgi, Federico Manuel A1 - Schmaelzlin, Elmar A1 - Usadel, Björn A1 - Perata, Pierdomenico A1 - van Dongen, Joost Thomas A1 - Geigenberger, Peter T1 - HRE-Type Genes are regulated by Growth-Related Changes in internal Oxygen Concentrations During the normal development of Potato (Solanum tuberosum) Tubers JF - Plant & cell physiology N2 - The occurrence of hypoxic conditions in plants not only represents a stress condition but is also associated with the normal development and growth of many organs, leading to adaptive changes in metabolism and growth to prevent internal anoxia. Internal oxygen concentrations decrease inside growing potato tubers, due to their active metabolism and increased resistance to gas diffusion as tubers grow. In the present work, we identified three hypoxia-responsive ERF (StHRE) genes whose expression is regulated by the gradual decrease in oxygen tensions that occur when potato tubers grow larger. Increasing the external oxygen concentration counteracted the modification of StHRE expression during tuber growth, supporting the idea that the actual oxygen levels inside the organs, rather than development itself, are responsible for the regulation of StHRE genes. We identified several sugar metabolism-related genes co-regulated with StHRE genes during tuber development and possibly involved in starch accumulation. All together, our data suggest a possible role for low oxygen in the regulation of sugar metabolism in the potato tuber, similar to what happens in storage tissues during seed development. KW - Co-expression KW - ERF KW - Hypoxia KW - Potato KW - Solanum tuberosum KW - Tuber Y1 - 2011 U6 - https://doi.org/10.1093/pcp/pcr128 SN - 0032-0781 VL - 52 IS - 11 SP - 1957 EP - 1972 PB - Oxford Univ. Press CY - Oxford ER - TY - JOUR A1 - Senge, Mathias O. A1 - Ryppa, Claudia A1 - Fazekas, Marijana A1 - Zawadzka, Monika A1 - Dahms, Katja T1 - 5,10-A2B2-Type meso-Substituted PorphyrinsuA Unique Class of Porphyrins with a Realigned Dipole Moment JF - Chemistry - a European journal N2 - Current applications in porphyrin chemistry require the use of unsymmetrically substituted porphyrins. Many current industrial interests in optics and biomedicine require systems with either pushpull (electron-donating and -withdrawing groups) or amphiphilic systems (hydrophobic and hydrophilic groups). In this context we present the class of 5,10-A2B2-type porphyrins for which two different substituents are positioned in diagonally opposite meso positions. Thus, the intramolecular dipole moment in these tetrapyrroles is positioned along a beta-beta vector passing through two pyrrole rings. This is opposite to the situation of the frequently used 5,15-A2BC porphyrins for which the dipole moment is oriented along a mesomeso axis. We have elaborated syntheses of the 5,10-A2B2 porphyrins by using transition-metal-catalyzed transformations of 5,10-A2 porphyrins or direct substitutions reactions thereof; this gives the target molecules in 2277% overall yields. The compounds exhibit interesting structural, spectroscopic, and optical features and can serve as building blocks for new porphyrin arrays and applications. KW - macrocycles KW - nitrogen heterocycles KW - nonlinear optics KW - porphyrinoids KW - tetrapyrroles Y1 - 2011 U6 - https://doi.org/10.1002/chem.201101934 SN - 0947-6539 VL - 17 IS - 48 SP - 13562 EP - 13573 PB - Wiley-VCH CY - Weinheim ER -