TY - JOUR A1 - Zehm, Daniel A1 - Laschewsky, André A1 - Liang, Hua A1 - Rabe, Jürgen P. T1 - Straightforward access to amphiphilic dual bottle brushes by combining RAFT, ATRP, and NMP polymerization in one sequence JF - Macromolecules : a publication of the American Chemical Society N2 - Molecular brush diblock copolymers were synthesized by the orthogonal overlay of the RAFT (reversible addition-fragmentation chain transfer), the ATRP (atom transfer radical polymerization), and the NMP (nitroxide-mediated polymerization) techniques. This unique combination enabled the synthesis of the complex amphiphilic polymers without the need of postpolymerization modifications, using a diblock copolymer intermediate made from two selectively addressable inimers and applying a sequence of four controlled free radical polymerization steps in total. The resulting polymers are composed of a thermosensitive poly(N-isopropylacrylamide) brush as hydrophilic block and a polystyrene brush as hydrophobic block, thus translating the structure of the established amphiphilic diblock copolymers known as macro surfactants to the higher size level of "giant surfactants". The dual molecular brushes and the aggregates formed on ultra flat solid substrates were visualized by scanning force microscopy (SFM). Y1 - 2011 U6 - https://doi.org/10.1021/ma2015613 SN - 0024-9297 VL - 44 IS - 24 SP - 9635 EP - 9641 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Zehm, Daniel A1 - Laschewsky, André A1 - Heunemann, Peggy A1 - Gradzielski, Michael A1 - Prevost, Sylvain A1 - Liang, Hua A1 - Rabe, Jürgen P. A1 - Lutz, Jean-Francois T1 - Synthesis and self-assembly of amphiphilic semi-brush and dual brush block copolymers in solution and on surfaces JF - Polymer Chemistry N2 - The combination of two techniques of controlled free radical polymerization, namely the reversible addition fragmentation chain transfer (RAFT) and the atom transfer radical polymerization (ATRP) techniques, together with the use of a macromonomer allowed the synthesis of symmetrical triblock copolymers, designed as amphiphilic dual brushes. One type of brush was made of poly(n-butyl acrylate) as soft hydrophobic block, i.e. characterized by a low glass transition temperature, while the other one was made of hydrophilic poly(ethylene glycol) (PEG). The new triblock polymers represent "giant surfactants" according to their molecular architecture. The hydrophobic and hydrophilic blocks microphase separate in the bulk. In aqueous solution, they aggregate into globular micellar aggregates, their size being determined by the length of the stretched polymer molecules. As determined by the combination of various scattering techniques for the dual brush copolymer, a rather compact structure is formed, which is dominated by the large hydrophobic poly(n-butyl acrylate) block. The aggregation number for the dual brush is about 10 times larger than for the "semi-brush" precursor copolymer, due to the packing requirements for the much bulkier hydrophobic core. On mica surfaces the triblock copolymers adsorb with worm-like backbones and stretched out side chains. Y1 - 2011 U6 - https://doi.org/10.1039/c0py00200c SN - 1759-9954 VL - 2 IS - 1 SP - 137 EP - 147 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Zaupa, Alessandro A1 - Neffe, Axel T. A1 - Pierce, Benjamin F. A1 - Lendlein, Andreas A1 - Hofmann, Dieter T1 - A molecular dynamic analysis of gelatin as an amorphous material Prediction of mechanical properties of gelatin systems JF - The international journal of artificial organs N2 - Biomaterials are used in regenerative medicine for induced autoregeneration and tissue engineering. This is often challenging, however, due to difficulties in tailoring and controlling the respective material properties. Since functionalization is expected to offer better control, in this study gelatin chains were modified with physically interacting groups based on tyrosine with the aim of causing the formation of physical crosslinks. This method permits application-specific properties like swelling and better tailoring of mechanical properties. The design of the crosslink strategy was supported by molecular dynamic (MD) simulations of amorphous bulk models for gelatin and functionalized gelatins at different water contents (0.8 and 25 wt.-%). The results permitted predictions to be formulated about the expected crosslink density and its influence on equilibrium swelling behavior and on elastic material properties. The models of pure gelatin were used to validate the strategy by comparison between simulated and experimental data such as density, backbone conformation angle distribution, and X-ray scattering spectra. A key result of the simulations was the prediction that increasing the number of aromatic functions attached to the gelatin chain leads to an increase in the number of physical netpoints observed in the simulated bulk packing models. By comparison with the Flory-Rehner model, this suggested reduced equilibrium swelling of the functionalized materials in water, a prediction that was subsequently confirmed by our experimental work. The reduction and control of the equilibrium degree of swelling in water is a key criterion for the applicability of functionalized gelatins when used, for example, as matrices for induced autoregeneration of tissues. KW - Physical Network KW - Biopolymer material KW - Molecular modeling KW - Gelatin Y1 - 2011 U6 - https://doi.org/10.5301/IJAO.2010.6083 SN - 0391-3988 VL - 34 IS - 2 SP - 139 EP - 151 PB - Wichtig CY - Milano ER - TY - JOUR A1 - Yuan, Jiayin A1 - ten Brummelhuis, Niels A1 - Junginger, Mathias A1 - Xie, Zailai A1 - Lu, Yan A1 - Taubert, Andreas A1 - Schlaad, Helmut T1 - Diversified applications of chemically modified 1,2-Polybutadiene JF - Macromolecular rapid communications N2 - Commercially available 1,2-PB was transformed into a well-defined reactive intermediate by quantitative bromination. The brominated polymer was used as a polyfunctional macroinitiator for the cationic ring-opening polymerization of 2-ethyl-2-oxazoline to yield a water-soluble brush polymer. Nucleophilic substitution of bromide by 1-methyl imidazole resulted in the formation of polyelectrolyte copolymers consisting of mixed units of imidazolium, bromo, and double bond. These copolymers, which were soluble in water without forming aggregates, were used as stabilizers in the heterophase polymerization of styrene and were also studied for their ionic conducting properties. KW - emulsion polymerization KW - polybutadiene KW - polyelectrolytes KW - polymer modification KW - ring-opening polymerization Y1 - 2011 U6 - https://doi.org/10.1002/marc.201100254 SN - 1022-1336 VL - 32 IS - 15 SP - 1157 EP - 1162 PB - Wiley-Blackwell CY - Malden ER - TY - JOUR A1 - Yin, Jian A1 - Linker, Torsten T1 - Stereoselective diversity-oriented syntheses of functionalized saccharides from bicyclic carbohydrate 1,2-lactones JF - Tetrahedron N2 - Bicyclic carbohydrate 1,2-lactones have been synthesized in only two steps and high yields by saponification and subsequent cyclization from known malonate addition products to glycals. The gluco-configured lactone serves as an important precursor for diversity-oriented syntheses. Thus, stereoselective opening of the lactone ring was realized with various nucleophiles in the presence of Sc(OTf)(3). This enabled the introduction of different substituents at the anomeric position, to afford a broad variety of 1-functionalized carbohydrates. On the other hand, stereoselective alpha-substitution of the gluco-configured lactone with different electrophiles and subsequent ring opening gives a collection of 2-functionalized saccharides. More than 30 products have been isolated in analytically pure form, and their configurations were unequivocally established by various NMR methods. Thus, carbohydrate 1,2-lactones are attractive precursors for the stereoselective synthesis of diverse saccharides. KW - Carbohydrates KW - Lactones KW - Glycosides KW - Molecular diversity KW - Synthetic methods Y1 - 2011 U6 - https://doi.org/10.1016/j.tet.2011.01.069 SN - 0040-4020 VL - 67 IS - 13 SP - 2447 EP - 2461 PB - Elsevier CY - Oxford ER - TY - JOUR A1 - Yarman, Aysu A1 - Nagel, Thomas A1 - Gajovic-Eichelmann, Nenad A1 - Fischer, Anna A1 - Wollenberger, Ursula A1 - Scheller, Frieder W. T1 - Bioelectrocatalysis by Microperoxidase-11 in a Multilayer Architecture of Chitosan Embedded Gold Nanoparticles JF - Electroanalysis : an international journal devoted to fundamental and practical aspects of electroanalysis N2 - We report on the redox behaviour of the microperoxidase-11 (MP-11) which has been electrostatically immobilized in a matrix of chitosan-embedded gold nanoparticles on the surface of a glassy carbon electrode. MP-11 contains a covalently bound heme c as the redox active group that exchanges electrons with the electrode via the gold nanoparticles. Electroactive surface concentration of MP-11 at high scan rate is between 350+/-50 pmol cm(-2), which reflects a multilayer process. The formal potential (E degrees') of MP-11 in the gold nanoparticles-chitosan film was estimated to be -(267.7+/-2.9) mV at pH 7.0. The heterogeneous electron transfer rate constant (k(s)) starts at 1.21 s(-1) and levels off at 6.45 s(-1) in the scan rate range from 0.1 to 2.0 V s(-1). Oxidation and reduction of MP-11 by hydrogen peroxide and superoxide, respectively have been coupled to the direct electron transfer of MP-11. KW - Microperoxidase KW - Direct electron transfer KW - Nanoparticles KW - Hydrogen peroxide KW - Superoxide KW - Bioelectrocatalysis Y1 - 2011 U6 - https://doi.org/10.1002/elan.201000535 SN - 1040-0397 VL - 23 IS - 3 SP - 611 EP - 618 PB - Wiley-Blackwell CY - Malden ER - TY - JOUR A1 - Xie, Zai-Lai A1 - White, Robin J. A1 - Weber, Jens A1 - Taubert, Andreas A1 - Titirici, Magdalena M. T1 - Hierarchical porous carbonaceous materials via ionothermal carbonization of carbohydrates JF - Journal of materials chemistry N2 - We report on the ionothermal synthesis of porous carbon materials from a variety of carbohydrate precursors (i.e. D-glucose, D-fructose, D-xylose, and starch) using 1-butyl-3-methylimidazolium tetrachloroferrate(III), [Bmim][FeCl(4)] as a reusable solvent and catalyst. The carbon materials derived from these different carbohydrates are similar in terms of particle size and chemical composition, possessing relatively high surface areas from 44 to 155 m(2) g(-1) after ionothermal processing, which can be significantly increased to > 350 m(2) g(-1) by further thermal treatment (e. g. post-carbonization at 750 degrees C). CO(2) and N(2) sorption analysis, combined with Hg intrusion porosimetry, reveals a promising hierarchical pore structuring to these carbon materials. The ionic liquid [Bmim][FeCl(4)] has a triple role: it acts as both a soft template to generate the characterized pore structuring, solvent and as a catalyst resulting in enhanced ionothermal carbon yields. Importantly from a process point of view, the ionic liquid can be successfully recovered and reused. The current work shows that ionothermal synthesis has the potential to be an effective, low cost, and green reusable synthetic route towards sustainable porous carbon materials. Y1 - 2011 U6 - https://doi.org/10.1039/c1jm00013f SN - 0959-9428 VL - 21 IS - 20 SP - 7434 EP - 7442 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Xie, Zai-Lai A1 - Taubert, Andreas T1 - Thermomorphic behavior of the ionic liquids [C(4)mim][FeCl4] and [C(12)mim][FeCl4] JF - ChemPhysChem : a European journal of chemical physics and physical chemistry N2 - The iron-containing ionic liquids 1-butyl-3-methylimidazolium tetrachloroferrate(III) [C(4)mim][FeCl4] and 1-dodecyl-3-methylimidazolium tetrachloroferrate(III) [C(12)mim][FeCl4] exhibit a thermally induced demixing with water (thermomorphism). The phase separation temperature varies with IL weight fraction in water and can be tuned between 100 degrees C and room temperature. The reversible lower critical solution temperature (LCST) is only observed at IL weight fractions below ca. 35% in water. UV/Vis, IR, and Raman spectroscopy along with elemental analysis prove that the yellow-brown liquid phase recovered after phase separation is the starting IL [C(4)mim][FeCl4] and [C(12)mim][FeCl4], respectively. Photometry and ICP-OES show that about 40% of iron remains in the water phase upon phase separation. Although the process is thus not very efficient at the moment, the current approach is the first example of an LCST behavior of a metal-containing IL and therefore, although still inefficient, a prototype for catalyst removal or metal extraction. KW - imidazolium KW - ionic liquids KW - phase transitions KW - Raman spectroscopy KW - thermomorphism Y1 - 2011 U6 - https://doi.org/10.1002/cphc.201000808 SN - 1439-4235 VL - 12 IS - 2 SP - 364 EP - 368 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Wischerhoff, Erik A1 - Badi, Nezha A1 - Laschewsky, André A1 - Lutz, Jean-Francois ED - Börner, Hans Gerhard ED - Lutz, JF T1 - Smart polymer surfaces concepts and applications in biosciences JF - Advances in polymer science = Fortschritte der Hochpolymeren-Forschung JF - Advances in Polymer Science N2 - Stimuli-responsive macromolecules (i.e., pH-, thermo-, photo-, chemo-, and bioresponsive polymers) have gained exponential importance in materials science, nanotechnology, and biotechnology during the last two decades. This chapter describes the usefulness of this class of polymer for preparing smart surfaces (e.g., modified planar surfaces, particles surfaces, and surfaces of three-dimensional scaffolds). Some efficient pathways for connecting these macromolecules to inorganic, polymer, or biological substrates are described. In addition, some emerging bioapplications of smart polymer surfaces (e.g., antifouling surfaces, cell engineering, protein chromatography, tissue engineering, biochips, and bioassays) are critically discussed. KW - Antifouling surfaces KW - Bioactive surfaces KW - Biocompatible polymers KW - Bioseparation KW - Cell engineering KW - Polymer-modified surfaces KW - Stimuli-responsive polymers Y1 - 2011 SN - 978-3-642-20154-7 U6 - https://doi.org/10.1007/12_2010_88 SN - 0065-3195 VL - 240 IS - 1 SP - 1 EP - 33 PB - Springer CY - Berlin ER - TY - JOUR A1 - Wirth, Jonas A1 - Monturet, Serge A1 - Klamroth, Tillmann A1 - Saalfrank, Peter T1 - Adsorption and (photo-) electrochemical splitting of water on rutile ruthenium dioxide JF - epl : a letters journal exploring the frontiers of physics N2 - In this work, the adsorption and splitting of the water molecule by light and/or an external potential is investigated in the frame of (photo-) electrochemical cells using a rutile ruthenium dioxide anode. With the help of periodic density functional calculations, the adsorbed structures of H(2)O and some radicals involved in the splitting process (O, OH, OOH) are obtained and compared with the available experimental results. On the basis of these electronic-structure calculations, we use a method to calculate the stability of the reaction intermediates and conclude on the thermodynamical possibility of the water splitting reaction at the surface. We demonstrate that a moderate overpotential of 0.64 V is required for the reaction to take place at the RuO(2)(110) surface. Y1 - 2011 U6 - https://doi.org/10.1209/0295-5075/93/68001 SN - 0295-5075 VL - 93 IS - 6 PB - EDP Sciences CY - Mulhouse ER - TY - JOUR A1 - Wessig, Pablo A1 - Wawrzinek, Robert A1 - Moellnitz, Kristian A1 - Feldbusch, Elvira A1 - Schilde, Uwe T1 - A new class of fluorescent dyes based on 1,3-benzodioxole and [1,3]-dioxolo[4.5-f]benzodioxole JF - Tetrahedron letters N2 - We report on synthesis and photophysical properties of a new class of fluorescent dyes. They are characterized by large Stokes-shifts, long fluorescence lifetimes in organic solvents and a pronounced dependency of the fluorescence lifetime on the solvent polarity. Also worthy of note is the high bleaching stability. To provide access to biochemical and medical applications a series of derivatives were prepared, which exhibit specific reactivity towards different biologically relevant functional groups (carboxylic acids, amines, maleimides, N-hydroxysuccinimide esters). Furthermore, two alkynes were prepared, which could be used in 'Click' chemistry. KW - Fluorescent dyes KW - Fluorescence lifetime KW - Large Stokes-shifts KW - Heterocycles Y1 - 2011 U6 - https://doi.org/10.1016/j.tetlet.2011.09.058 SN - 0040-4039 VL - 52 IS - 46 SP - 6192 EP - 6195 PB - Elsevier CY - Oxford ER - TY - JOUR A1 - Wessig, Pablo A1 - Pick, Charlotte A1 - Schilde, Uwe T1 - First example of an atropselective dehydro-Diels-Alder (ADDA) reaction JF - Tetrahedron letters N2 - A new concept of a stereoselective synthesis of axially chiral biaryls, formed in the course of the dehydro-Diels-Alder (DDA) reaction, has been disclosed. It is based on asymmetric induction of the newly formed chirality axis by a chirality center, which is present in the two synthesized DDA reactants. Depending on the different length of the linkers joining the alkyne moieties the DDA reaction may be triggered photochemically or thermally, where only the thermal variant was stereoselective. KW - Cycloaddition KW - Atropselecrivity KW - Biaryls KW - Alkynes KW - Photochemistry Y1 - 2011 U6 - https://doi.org/10.1016/j.tetlet.2011.06.024 SN - 0040-4039 VL - 52 IS - 32 SP - 4221 EP - 4223 PB - Elsevier CY - Oxford ER - TY - JOUR A1 - Wessig, Pablo A1 - Pick, Charlotte T1 - Photochemical synthesis and properties of axially chiral naphthylpyridines JF - Journal of photochemistry and photobiology : A, Chemistry N2 - Five alkynyl pyridines were prepared and cyclized to naphthylpyridines as the main products in the course of a Photo-Dehydro-Diels-Alder reaction. Four of the final products are axially chiral and the determination of the rotational barrier by DFT calculations, dynamic NMR and H PLC experiments is demonstrated. (C) 2011 Elsevier B.V. All rights reserved. KW - Photochemistry KW - Axial chirality KW - Photo-Dehydro-Diels-Alder reaction KW - Dynamic NMR KW - Dynamic HPLC KW - Molecular modeling Y1 - 2011 U6 - https://doi.org/10.1016/j.jphotochem.2011.06.006 SN - 1010-6030 VL - 222 IS - 1 SP - 263 EP - 265 PB - Elsevier CY - Lausanne ER - TY - JOUR A1 - Wessig, Pablo A1 - Möllnitz, Kristian A1 - Kelling, Alexandra A1 - Schilde, Uwe T1 - Crystal structure of 1r,2c,3c,4t,5t,6t-1,2,3,4,5,6-hexakis-trimethylsilanyloxy-cyclohexane, C24H60O6Si6 JF - Zeitschrift für Kristallographie : international journal for structural, physical and chemical aspects of crystalline materials ; New crystal structures N2 - C24H60O6Si6, triclinic, P (1) over bar (no. 2), a = 11.307(2) angstrom, b = 12.159(2) angstrom, = 16.576(2) angstrom, alpha = 109.47(1)degrees, beta = 94.64(1)degrees, gamma = 111.65(1)degrees, V = 1942.3 angstrom(3), Z = 2, R-gt(F) = 0.043, wR(ref)(F-2) = 0.118, T = 210 K. Y1 - 2011 U6 - https://doi.org/10.1524/ncrs.2011.0105 SN - 1433-7266 VL - 226 IS - 2 SP - 228 EP - 230 PB - De Gruyter Oldenbourg CY - München ER - TY - JOUR A1 - Wessig, Pablo A1 - Matthes, Annika A1 - Pick, Charlotte T1 - The photo-dehydro-Diels-Alder (PDDA) reaction JF - Organic & biomolecular chemistry : an international journal of synthetic, physical and biomolecular organic chemistry N2 - The photo-dehydro-Diels-Alder (PDDA) reaction is a valuable extension of the classical Diels-Alder (DA) reaction. The PDDA reaction differs from the DA reaction by the replacement of one of the C-C-double bonds of the diene moiety by a C-C triple bond and by the photochemical triggering of the reaction. This entails that, in contrast to the DA reaction, the PDDA reaction proceeds according to a multistage mechanism with biradicals and cycloallenes as intermediates. The PDDA reaction provides access to a considerable variety of compound classes. For example, 1-phenylnaphthlenes, 1,1'-binaphthyls, N-heterocyclic biaryls, and naphthalenophanes could be obtained by this reaction. Y1 - 2011 U6 - https://doi.org/10.1039/c1ob06066j SN - 1477-0520 VL - 9 IS - 22 SP - 7599 EP - 7605 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Wessig, Pablo A1 - Matthes, Annika T1 - Preparation of Strained Axially Chiral (1,5)Naphthalenophanes by Photo-dehydro-Diels-Alder Reaction JF - Journal of the American Chemical Society N2 - The preparation of 10 (1,5)naphthalenophanes (10a-j) by photo-dehydro-Diels-Alder (PDDA) reaction is described. Owing to hindered rotation around the biaryl axis, compounds 10 are axially chiral and the separation of enantiomers by chiral HPLC was demonstrated in three cases (10a,b,e). The absolute configuration of the isolated enantiomers could be unambiguously determined by comparison of calculated and measured circular dichroism (CD) spectra. Furthermore, we analyzed ring strain phenomena of (1,5)naphthalenophanes 10. Depending on the length of the linker units, one can distinguish three classes of naphthalenophanes. Compounds 10a-c are highly strained (E-STR = 7-31 kcal/mol), and the strain is caused by small bond angles in the linker unit and deformation of the naphthalene moiety. Another type of strain is observed if the linker unit becomes relatively long (10g,h) originating from transannular interactions and is comparable with the well-known strain of medium sized rings. The naphthalenophanes 10d-f with a linker length of 10-14 atoms are only marginally strained. To clearly discriminate the different sources of strain, we defined two geometrical parameters (average central dihedral angle delta(C) and naphthalene thickness D-N) and demonstrated that they are well-suited to indicate naphthalene deformation of our naphthalenophanes 10 as well as of ten model naphthalenophanes (I-X) with different linker lengths and linking positions. Y1 - 2011 U6 - https://doi.org/10.1021/ja109118m SN - 0002-7863 VL - 133 IS - 8 SP - 2642 EP - 2650 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Wellert, Stefan A1 - Tiersch, Brigitte A1 - Koetz, Joachim A1 - Richardt, Andre A1 - Lapp, Alain A1 - Holderer, Olaf A1 - Gaeb, Juergen A1 - Blum, Marc-Michael A1 - Schulreich, Christoph A1 - Stehle, Ralf A1 - Hellweg, Thomas T1 - The DFPase from Loligo vulgaris in sugar surfactant-based bicontinuous microemulsions structure, dynamics, and enzyme activity JF - European biophysics journal : with biophysics letters ; an international journal of biophysics N2 - The enzyme diisopropyl fluorophosphatase (DFPase) from the squid Loligo vulgaris is of great interest because of its ability to catalyze the hydrolysis of highly toxic organophosphates. In this work, the enzyme structure in solution (native state) was studied by use of different scattering methods. The results are compared with those from hydrodynamic model calculations based on the DFPase crystal structure. Bicontinuous microemulsions made of sugar surfactants are discussed as host systems for the DFPase. The microemulsion remains stable in the presence of the enzyme, which is shown by means of scattering experiments. Moreover, activity assays reveal that the DFPase still has high activity in this complex reaction medium. To complement the scattering experiments cryo-SEM was also employed to study the microemulsion structure. KW - Dynamic light scattering KW - Neutron spin echo KW - Microemulsion KW - Enzyme catalysis KW - SANS KW - Protein structure Y1 - 2011 U6 - https://doi.org/10.1007/s00249-011-0689-0 SN - 0175-7571 VL - 40 IS - 6 SP - 761 EP - 774 PB - Springer CY - New York ER - TY - THES A1 - Weiß, Jan T1 - Synthesis and self-assembly of multiple thermoresponsive amphiphilic block copolymers T1 - Synthese und Selbstorganisation von mehrfach thermisch schaltbaren amphiphilen Blockcopolymeren N2 - In the present thesis, the self-assembly of multi thermoresponsive block copolymers in dilute aqueous solution was investigated by a combination of turbidimetry, dynamic light scattering, TEM measurements, NMR as well as fluorescence spectroscopy. The successive conversion of such block copolymers from a hydrophilic into a hydrophobic state includes intermediate amphiphilic states with a variable hydrophilic-to-lipophilic balance. As a result, the self-organization is not following an all-or-none principle but a multistep aggregation in dilute solution was observed. The synthesis of double thermoresponsive diblock copolymers as well as triple thermoresponsive triblock copolymers was realized using twofold-TMS labeled RAFT agents which provide direct information about the average molar mass as well as residual end group functionality from a routine proton NMR spectrum. First a set of double thermosensitive diblock copolymers poly(N-n-propylacrylamide)-b-poly(N-ethylacrylamide) was synthesized which differed only in the relative size of the two blocks. Depending on the relative block lengths, different aggregation pathways were found. Furthermore, the complementary TMS-labeled end groups served as NMR-probes for the self-assembly of these diblock copolymers in dilute solution. Reversible, temperature sensitive peak splitting of the TMS-signals in NMR spectroscopy was indicative for the formation of mixed star-/flower-like micelles in some cases. Moreover, triple thermoresponsive triblock copolymers from poly(N-n-propylacrylamide) (A), poly(methoxydiethylene glycol acrylate) (B) and poly(N-ethylacrylamide) (C) were obtained from sequential RAFT polymerization in all possible block sequences (ABC, BAC, ACB). Their self-organization behavior in dilute aqueous solution was found to be rather complex and dependent on the positioning of the different blocks within the terpolymers. Especially the localization of the low-LCST block (A) had a large influence on the aggregation behavior. Above the first cloud point, aggregates were only observed when the A block was located at one terminus. Once placed in the middle, unimolecular micelles were observed which showed aggregation only above the second phase transition temperature of the B block. Carrier abilities of such triple thermosensitive triblock copolymers tested in fluorescence spectroscopy, using the solvatochromic dye Nile Red, suggested that the hydrophobic probe is less efficiently incorporated by the polymer with the BAC sequence as compared to ABC or ACB polymers above the first phase transition temperature. In addition, due to the problem of increasing loss of end group functionality during the subsequent polymerization steps, a novel concept for the one-step synthesis of multi thermoresponsive block copolymers was developed. This allowed to synthesize double thermoresponsive di- and triblock copolymers in a single polymerization step. The copolymerization of different N-substituted maleimides with a thermosensitive styrene derivative (4-vinylbenzyl methoxytetrakis(oxyethylene) ether) led to alternating copolymers with variable LCST. Consequently, an excess of this styrene-based monomer allowed the synthesis of double thermoresponsive tapered block copolymers in a single polymerization step. N2 - Die Selbstorganisation von mehrfach thermisch schaltbaren Blockcopolymeren in verdünnter wässriger Lösung wurde mittels Trübungsphotometer, dynamischer Lichtstreuung, TEM Messungen, NMR sowie Fluoreszenzspektroskopie untersucht. Die schrittweise Überführung eines hydrophilen in ein hydrophobes Blockcopolymer beinhaltet ein oder mehr amphiphile Zwischenstufen mit einstellbarem hydrophilen zu lipophilen Anteil (HLB). Dies führt dazu, dass die Selbstorganisation solcher Polymere in Lösung nicht nur einem Alles-oder-nichts-Prinzip folgt sondern ein mehrstufiges Aggregationsverhalten beobachtet wird. Die Synthese von doppelt thermisch schaltbaren Diblockcopolymeren und dreifach thermisch schaltbaren Triblockcopolymeren wurde durch sequenzielle RAFT Polymerisation realisiert. Dazu wurden zweifach TMS-markierte RAFT Agentien verwendet, welche die Bestimmung der molaren Masse sowie der verbliebenen Endgruppenfunktionalität direkt aus einem Protonen NMR Spektrum erlauben. Mit diesen RAFT Agentien wurde zunächst eine Serie von doppelt thermisch schaltbaren Diblockcopolymeren aus Poly(N-n-propylacrylamid)-b-Poly(N-ethylacrylamid), welche sich lediglich durch die relativen Blocklängen unterscheiden, hergestellt. In Abhängigkeit von der relativen Blocklänge wurde ein unterschiedliches Aggregationsverhalten der Diblockcopolymere in verdünnter wässriger Lösung beobachtet. Des Weiteren wirken die komplementär TMS-markierten Endgruppen als NMR-Sonden während der schrittweisen Aggregation dieser Polymere. Reversible, temperaturabhängige Peakaufspaltung der TMS-Signale in der NMR Spektroskopie spricht für eine Aggregation in gemischte stern-/blumenartige Mizellen, in denen ein Teil der hydrophoben Endgruppen in den hyrophoben Kern zurückfaltet. Obendrein wurden dreifach thermisch schaltbare Triblockcopolymere aus Poly(N-n-propylacrylamid) (A), Poly(methoxydiethylen glycol acrylat) (B) und Poly(N-ethylacrylamid) (C) in allen möglichen Blocksequenzen (ABC, BAC, ACB) durch schrittweisen Aufbau mittels RAFT Polymerisation erhalten. Das Aggregationsverhalten dieser Polymere in verdünnter wässriger Lösung war relativ komplex und hing stark von der Position der einzelnen Blöcke in den Triblockcopolymeren ab. Besonders die Position des Blocks mit der niedrigsten LCST (A) war ausschlaggebend für die resultierenden Aggregate. So wurde oberhalb der ersten Phasenübergangstemperatur nur Aggregation der Triblockcopolymere beobachtet, wenn der A Block an einem der beiden Enden der Polymere lokalisiert war. Wurde der A Block hingegen in der Mitte der Polymere positioniert, entstanden unimere Mizellen zwischen der ersten und zweiten Phasenübergangstemperatur, welche erst aggregierten, nachdem der zweite Block (B) seinen Phasenübergang durchlief. Die Transportereigenschaften dieser Triblockcopolymere wurden mittels Fluoreszenzspektroskopie getestet. Dazu wurde die Einlagerung eines hydrophoben, solvatochromen Fluoreszenzfarbstoffes, Nilrot, in Abhängigkeit der Temperatur untersucht. Im Gegensatz zu den Polymeren mit der Blocksequenz ABC oder ACB, zeigten die Polymere mit der Sequenz BAC eine verminderte Aufnahmefähigkeit des hydrophoben Farbstoffes oberhalb des ersten Phasenübergangs, was auf die fehlende Aggregation und die damit verbundenen relativ kleinen hydrophoben Domänen der unimolekularen Mizellen zwischen der ersten und zweiten Phasenübergangstemperatur zurückzuführen ist. Aufgrund des zunehmenden Verlustes von funktionellen Endgruppen während der RAFT Synthese von Triblockcopolymeren wurde ein neuartiges Konzept zur Einschrittsynthese von mehrfach schaltbaren Blockcopolymeren entwickelt. Dieses erlaubt die Synthese von mehrfach schaltbaren Diblock- und Triblockcopoylmeren in einem einzelnen Reaktionsschritt. Die Copolymeriation von verschiedenen N-substituierten Maleimiden mit einem thermisch schaltbaren Styrolderivat (4-Vinylbenzylmethoxytetrakis(oxyethylene) ether) ergab alternierende Copolymere mit variabler LCST. Die Verwendung eines Überschusses dieses styrolbasierten Monomers erlaubt ferner die Synthese von Gradientenblockcopolymeren in einem einzelnen Polymerisationsschritt. KW - Selbstorganisation KW - Blockcopolymer KW - RAFT KW - temperaturschaltbar KW - Mizelle KW - self-assembly KW - block copolymer KW - RAFT KW - thermoresponsive KW - micelle Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-53360 ER - TY - JOUR A1 - Weiss, Jan A1 - Laschewsky, André T1 - Temperature-induced self-assembly of triple-responsive triblock copolymers in aqueous solutions JF - Langmuir N2 - A series of triple-thermoresponsive triblock copolymers from poly(N-n-propylacrylamide) (PNPAM, A), poly(methoxydiethylene glycol acrylate) (PMDEGA, B), and poly(N-ethylacrylamide) (PNEAM, C) was synthesized by sequential reversible addition-fragmentation chain transfer polymerizations. Polymers of differing block sequences, ABC, BAC, and ACB, with increasing phase transition temperatures in the order A < B < C were prepared. Their aggregation behavior in dilute aqueous solution was investigated using dynamic light scattering, turbidimetry, and NMR spectroscopy. The self-organization of such polymers was found to dependent strongly on the block sequence. While polymers with a terminal low-LCST (lower critical solution temperature) block undergo aggregation above the first phase transition temperature at 20-25 degrees C, triblock copolymers with the low-LCST block in the middle show aggregation only above the second phase transition. The collapse of the middle block is not sufficient to induce aggregation but produces instead stable, unimolecular micelles with a collapsed middle block, as supported by NMR and fluorescence probe data. Continued heating of all copolymers led to two additional thermal transitions at 40-55 and 70-80 degrees C, which could be correlated to the phase transitions of the B and C blocks, respectively. All polymers show a high tendency for cluster formation, once aggregation is induced. The carrier abilities of the triple responsive triblock copolymers for hydrophobic agents were probed with the solvatochromic fluorescence dye Nile Red. With passing through the first thermal transition, the block copolymers are capable of solubilizing Nile Red. In the case of block copolymers with sequences ABC or ACB, which bear the low-LCST block at one terminus, notable amounts of dye are solubilized already at this stage. In contrast, the hydrophobic probe is much less efficiently incorporated by the BAC triblock copolymer, which forms unimolecular micelles. Only after the collapse of the B block, when reaching the second phase transition at about 45 degrees C, does aggregation occur and solubilization becomes efficient. In the case of ABC and ACB polymers, the hydrophobic probe seems to partition between the originally collapsed A chains and the additional hydrophobic chains formed after the collapse of the less hydrophobic B block. Y1 - 2011 U6 - https://doi.org/10.1021/la200115p SN - 0743-7463 VL - 27 IS - 8 SP - 4465 EP - 4473 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Weiss, Jan A1 - Böttcher, Christoph A1 - Laschewsky, André T1 - Self-assembly of double thermoresponsive block copolymers end-capped with complementary trimethylsilyl groups JF - Soft matter N2 - A set of double thermoresponsive diblock copolymers poly(N-n-propylacrylamide)-block-poly(N-ethylacrylamide) (PNPAM-b-PNEAM) was synthesised by sequential reversible addition-fragmentation chain transfer (RAFT) polymerisations. Using a twofold trimethylsilyl (TMS)-labeled RAFT-agent, the relative size of the two blocks was varied. While soluble as unimers below 15 degrees C, all copolymers exhibited thermally induced two-step self-assembly in water, due to distinct lower critical solution temperature (LCST) phase transitions of PNPAM (around 20 degrees C) and PNEAM (around 70 degrees C). Their temperature-dependent self-organisation in dilute aqueous solution was studied by turbidimetry, dynamic light scattering, transmission electron microscopy, and (1)H NMR spectroscopy. The copolymers show distinct, two-step self-organisation behaviour with respect to transition temperatures, aggregate type and size, which can be correlated to the relative lengths of the low and high LCST blocks. For polymers having short blocks with low LCST, the first thermal transition induces the formation of individual micelles. Further heating above the second thermal transition results reversibly either in a shrink of the micelle size or in aggregation of the micelles, with hydrodynamic diameters below 250 nm. In contrast in the case of polymers having a long block with low LCST, the first thermal transition already leads to clusters of micelles, while the second thermal transition makes the clusters shrink. Noteworthy, the twofold TMS-labeled end groups report not only on the molar masses of the polymers, but can simultaneously serve as NMR-probes for the self-assembly process. The signal of the TMS-aryl end group displays a reversible temperature dependent, two-step splitting that is indicative of the self-organisation of the block copolymers. Y1 - 2011 U6 - https://doi.org/10.1039/c0sm00531b SN - 1744-683X VL - 7 IS - 2 SP - 483 EP - 492 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Weigel, A. A1 - Dobryakov, A. A1 - Klaumünzer, Bastian A1 - Sajadi, M. A1 - Saalfrank, Peter A1 - Ernsting, N. P. T1 - Femtosecond stimulated raman spectroscopy of flavin after optical excitation JF - The journal of physical chemistry : B, Condensed matter, materials, surfaces, interfaces & biophysical chemistry N2 - In blue-light photoreceptors using flavin (BLUF), the signaling state is formed already within several 100 ps after illumination, with only small changes of the absorption spectrum. The accompanying structural evolution can, in principle, be monitored by femtosecond stimulated Raman spectroscopy (FSRS). The method is used here to characterize the excited-state properties of riboflavin and flavin adenine dinucleotide in polar solvents. Raman modes are observed in the range 90-1800 cm(-1) for the electronic ground state S-0 and upon excitation to the S-1 state, and modes >1000 cm(-1) of both states are assigned with the help of quantum-chemical calculations. Line shapes are shown to depend sensitively on resonance conditions. They are affected by wavepacket motion in any of the participating electronic states, resulting in complex amplitude modulation of the stimulated Raman spectra. Wavepackets in S-1 can be marked, and thus isolated, by stimulated-emission pumping with the picosecond Raman pulses. Excited-state absorption spectra are obtained from a quantitative comparison of broadband transient fluorescence and absorption. In this way, the resonance conditions for FSRS are determined. Early differences of the emission spectrum depend on excess vibrational energy, and solvation is seen as dynamic Stokes shift of the emission band. The ne state is evidenced only through changes of emission oscillator strength during solvation. S-1 quenching by adenine is seen with all methods in terms of dynamics, not by spectral intermediates. Y1 - 2011 U6 - https://doi.org/10.1021/jp1117129 SN - 1520-6106 VL - 115 IS - 13 SP - 3656 EP - 3680 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Weber, Nancy A1 - Tiersch, Brigitte A1 - Unterlass, Miriam M. A1 - Heilig, Anneliese A1 - Tauer, Klaus T1 - "Schizomorphic" Emulsion Copolymerization Particles JF - Macromolecular rapid communications N2 - Cryo-electron microscopy, atomic force microscopy, and light microscopy investigations provide experimental evidence that amphiphilic emulsion copolymerization particles change their morphology in dependence on concentration. The shape of the particles is spherical at solids content above 1%, but it changes to rod-like, ring-like, and web-like structures at lower concentrations. In addition, the shape and morphology of these particles at low concentrations are not fixed but very flexible and vary with time between spheres, flexible pearlnecklace structures, and stretched rods. KW - amphiphilic particles KW - emulsion polymerization KW - morphology Y1 - 2011 U6 - https://doi.org/10.1002/marc.201100491 SN - 1022-1336 VL - 32 IS - 23 SP - 1925 EP - 1929 PB - Wiley-Blackwell CY - Malden ER - TY - THES A1 - Weber, Nancy T1 - Die Synthese "schizomorpher" Copolymer - Latexteilchen Y1 - 2011 CY - Potsdam ER - TY - CHAP A1 - Vukicevic, Radovan A1 - Schreiber, Ulrike A1 - Beuermann, Sabine T1 - Azide-terminated poly(vinylidene fluoride) as building block for nanocomposite materials and block copolymers T2 - Abstracts of papers : joint conference / The Chemical Institute of Cananda, CIC, American Chemical Society, ACS Y1 - 2011 SN - 0065-7727 VL - 242 IS - 16 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Vukicevic, Radovan A1 - Beuermann, Sabine T1 - Fullerenes decorated with poly(vinylidene fluoride) JF - Macromolecules : a publication of the American Chemical Society N2 - Fullerenes decorated with poly(vinylidene fluoride) (PVDF) were synthesized in a three-step procedure: Iodine transfer polymerization of vinylidene fluoride with C(6)F(12)I(2) as the chain transfer agent was carried out in supercritical carbon dioxide to synthesize iodine-terminated PVDF, which was subsequently transformed to azide-terminated polymer. Finally, azide-terminated PVDF chains were attached to a fullerene core under microwave irradiation at 160 degrees C in 1.5 h. The materials were characterized by NMR, FT-IR, UV/vis, GPC, elemental analysis, and DSC. On average, 4-5 PVDF chains are attached to one C(60) moiety. FT-IR spectra and DSC measurements indicate that the polymer end groups strongly affect the crystallinity of the material. For PVDF with azide end groups and PVDF attached to fullerenes the fraction of the beta polymorph is dominant while alpha polymorphs are almost absent. Y1 - 2011 U6 - https://doi.org/10.1021/ma102754c SN - 0024-9297 VL - 44 IS - 8 SP - 2597 EP - 2603 PB - American Chemical Society CY - Washington ER - TY - THES A1 - Vukicevic, Radovan T1 - Iodine- and azide-terminated poly(vinylidene fluoride) as a building block for the preparation of hybrid materials and block copolymers Y1 - 2011 CY - Potsdam ER - TY - JOUR A1 - Vijayakrishnan, Balakumar A1 - Issaree, Arisara A1 - Corilo, Yuri E. A1 - Ferreira, Christina Ramires A1 - Eberlin, Marcos N. A1 - Peter, Martin G. T1 - MSn of the six isomers of (GlcN)(2)(GlcNAc)(2) aminoglucan tetrasaccharides (diacetylchitotetraoses) rules of fragmentation for the sodiated molecules and application to sequence analysis of hetero-chitooligosaccharides JF - Carbohydrate polymers : an international journal devoted to scientific and technological aspects of industrially important polysaccharides N2 - The six possible isomers of di-N-acetylchitotetraoses [AADD, ADDA, ADAD, DADA, DAAD, and DDAA, where D stands for 2-amino-2-deoxy-3-D-glucose (GlcN) and A for 2-acetamido-2-deoxy-beta-D-glucose (GlcNAc)] were analyzed by ESI(+)-MSn. Collision induced dissociation via MSn experiments were performed for the sodiated molecules of m/z 769 [M+Na](+) for each isomer, and fragments were generated mainly by glycosidic bond and cross-ring cleavages. Rules of fragmentation were then established. A reducing end D residue yields the (O.2)A(4) cross-ring [M-59+Na](+) fragment of m/z 710 as the most abundant, whereas isomers containing a reducing end A prefer to lose water to form the [M-18+Na](+) ion of m/z 751, as well as abundant (O.2)A(4) cross-ring [M-101+Na](+) fragments of m/z 668 and B-3 [M-221+Na](+) ions of m/z 548. MS3 of C- and Y-type ions shows analogous fragmentation behaviour that allows identification of the reducing end next-neighbour residue. Due to gas-phase anchimeric assistance, B-type cleavage between the glycosidic oxygen and the anomeric carbon atom is favoured when the glycon is an A residue. Relative ion abundances are generally in the order B >> C > Y, but may vary depending on the next neighbour towards the non-reducing end. These fragmentation rules were used for partial sequence analysis of hetero-chitooligosaccharides of the composition D(2)A(3), D(3)A(3), D(2)A(4), D(4)A(3), and D(3)A(4). KW - Chitosan KW - Fragmentation KW - Oligosaccharides KW - Sequence analysis KW - Tandem mass spectrometry Y1 - 2011 U6 - https://doi.org/10.1016/j.carbpol.2010.04.041 SN - 0144-8617 VL - 84 IS - 2 SP - 713 EP - 726 PB - Elsevier CY - Oxford ER - TY - JOUR A1 - Vidadala, Srinivasa Rao A1 - Pimpalpalle, Tukaram M. A1 - Linker, Torsten A1 - Hotha, Srinivas T1 - Gold-Catalyzed reactions of 2-C-Branched carbohydrates mild glycosidations and selective anomerizations JF - European journal of organic chemistry N2 - 2-C-branched methyl glycosides react with various alcohols under gold catalysis to transglycosylated products. The method is applicable for the convenient synthesis of disaccharides. Without nucleophile a selective anomerization occurs, giving first access to alpha-configured 2-C-nitromethyl glycosides. The results are interesting for the mechanism of gold-catalyzed glycosidations. KW - Anomerization KW - Carbohydrates KW - Glycosidation KW - Gold KW - Synthetic methods Y1 - 2011 U6 - https://doi.org/10.1002/ejoc.201100134 SN - 1434-193X IS - 13 SP - 2426 EP - 2430 PB - Wiley-Blackwell CY - Malden ER - TY - THES A1 - Valverde Serrano, Clara T1 - Self-assembly behavior in hydrophilic block copolymers T1 - Selbstorganisation von hydrophilen Blockcopolymeren N2 - Block copolymers are receiving increasing attention in the literature. Reports on amphiphilic block copolymers have now established the basis of their self-assembly behavior: aggregate sizes, morphologies and stability can be explained from the absolute and relative block lengths, the nature of the blocks, the architecture and also solvent selectiveness. In water, self-assembly of amphiphilic block copolymers is assumed to be driven by the hydrophobic. The motivation of this thesis is to study the influence on the self-assembly in water of A b B type block copolymers (with A hydrophilic) of the variation of the hydrophilicity of B from non-soluble (hydrophobic) to totally soluble (hydrophilic). Glucose-modified polybutadiene-block-poly(N-isopropylacrylamide) copolymers were prepared and their self-assembly behavior in water studied. The copolymers formed vesicles with an asymmetric membrane with a glycosylated exterior and poly(N-isopropylacrylamide) on the inside. Above the low critical solution temperature (LCST) of poly(N-isopropylacrylamide), the structure collapsed into micelles with a hydrophobic PNIPAM core and glycosylated exterior. This collapse was found to be reversible. As a result, the structures showed a temperature-dependent interaction with L-lectin proteins and were shown to be able to encapsulate organic molecules. Several families of double hydrophilic block copolymers (DHBC) were prepared. The blocks of these copolymers were biopolymers or polymer chimeras used in aqueous two-phase partition systems. Copolymers based on dextran and poly(ethylene glycol) blocks were able to form aggregates in water. Dex6500-b-PEG5500 copolymer spontaneously formed vesicles with PEG as the “less hydrophilic” barrier and dextran as the solubilizing block. The aggregates were found to be insensitive to the polymer's architecture and concentration (in the dilute range) and only mildly sensitive to temperature. Variation of the block length, yielded different morphologies. A longer PEG chain seemed to promote more curved aggregates following the inverse trend usually observed in amphiphilic block copolymers. A shorter dextran promoted vesicular structures as usually observed for the amphiphilic counterparts. The linking function was shown to have an influence of the morphology but not on the self-assembly capability in itself. The vesicles formed by dex6500-b-PEG5500 showed slow kinetics of clustering in the presence of Con A lectin. In addition both dex6500-b-PEG5500 and its crosslinked derivative were able to encapsulate fluorescent dyes. Two additional dextran-based copolymers were synthesized, dextran-b-poly(vinyl alcohol) and dextran-b-poly(vinyl pyrrolidone). The study of their self-assembly allowed to conclude that aqueous two-phase systems (ATPS) is a valid source of inspiration to conceive DHBCs capable of self-assembling. In the second part the principle was extended to polypeptide systems with the synthesis of a poly(N-hydroxyethylglutamine)-block-poly(ethylene glycol) copolymer. The copolymer that had been previously reported to have emulsifying properties was able to form vesicles by direct dissolution of the solid in water. Last, a series of thermoresponsive copolymers were prepared, dextran-b-PNIPAMm. These polymers formed aggregates below the LCST. Their structure could not be unambiguously elucidated but seemed to correspond to vesicles. Above the LCST, the collapse of the PNIPAM chains induced the formation of stable objects of several hundreds of nanometers in radius that evolved with increasing temperature. The cooling of these solution below LCST restored the initial aggregates. This self-assembly of DHBC outside any stimuli of pH, ionic strength, or temperature has only rarely been described in the literature. This work constituted the first formal attempt to frame the phenomenon. Two reasons were accounted for the self-assembly of such systems: incompatibility of the polymer pairs forming the two blocks (enthalpic) and a considerable solubility difference (enthalpic and entropic). The entropic contribution to the positive Gibbs free energy of mixing is believed to arise from the same loss of conformational entropy that is responsible for “the hydrophobic effect” but driven by a competition for water of the two blocks. In that sense this phenomenon should be described as the “hydrophilic effect”. N2 - Blockcopolymere erfahren ein stetig wachsendes Interesse, was an der steigenden Anzahl an Publikationen zu diesem Thema erkennbar ist. Zahlreiche Studien zu amphiphilen Blockcopolymeren haben dabei einige grundlegende Erkenntnisse über deren chemisches und physikalisches Verhalten, vor allem über die Selbstorganisation, hervorgebracht. So können die Größe, die verschiedenen Morphologien und auch die Stabilität der gebildeten Aggregate anhand der relativen und absoluten Blocklängen, die chemischen Struktur der Blöcke, der molekularen Architektur und der Eigenschaften des verwendeten Lösungsmittel erklärt werden. Im speziellen Fall des Wassers als Lösungsmittel bist die Selbstorganisation amphiphiler Blockcopolymere durch den hydrophoben Effekt bedingt. Dieser Arbeit liegt das Interesse an der Selbstorganisation in wässrigem Medium von Blockcopolymeren des Typs A-b-B mit A als hydrophilem Block und B als Block mit variierender Hydrophilie bzw. Hydrophpobie von unlöslich bis vollständig löslich zugrunde. Durch Variation dieser Eigenschaften von Block B soll dessen Einfluss auf das Selbstorganisationsverhalten untersucht werden. Dazu wurden mit Glucose modifizierte Polybutadien-block-Poly(N-Isopropylacrylamid)-Copolymere hergestellt und deren Selbstorganisation in Wasser untersucht. Die Copolymere bilden Vesikel mit einer asymmetrischen Membran, wobei im äußeren Bereich glycolysierte Gruppen und im inneren Bereich Poly(N-Isopropylacrylamid) (PNIPAM) vorliegen. Beim Überschreiten der low critical solution temperature (LCST) kollabiert die vesikuläre Struktur unter Bildung von Mizellen mit einem hydrophoben PNIPAM-Mizellinneren und nach außen gerichteten glycolysierten Blöcken. Diese strukturelle Umwandlung ist reversibel. Die Strukturen zeigten außerdem eine temperaturabhängige Wechselwirkung mit L-Lectin-Proteinen und die Möglichkeit zur Einkapselung organischer Moleküle konnte belegt werden. Des weiteren wurden verschiedene Gruppen von Blockcopolymeren mit zwei hydrophilen Blöcken synthetisiert (double hydrophilic block copolymers – DHBC). Die Blöcke dieser Systeme waren entweder Biopolymere oder Polymerchimäre, die in wässrigen Zwei-Phasen-Trennverfahren eingesetzt werden. Polymere, die auf Dextran- und Poly(ethylenglycol)-Blöcken basieren, zeigen Aggregatbildung in wässriger Phase. Dex6500-b-PEG5500 bildet spontan Vesikel mit PEG als „weniger hydrophilem“ Bestandteil und Dextran als löslichem Block. Die Bildung dieser Vesikel zeigte keine Emfpindlichkeit gegenüber einer Veränderung der Polymerarchitektur und der Konzentration, und nur eine geringe Sensitivität gegenüber Temperaturänderungen. Veränderungen der Blocklängen dagegen beeinflussten die Selbstorganisation und führten zu unterschiedlichen Morphologien. Längere PEG-Blöcke bevorzugten dabei die Bildung eher gekrümmter Aggregate, entgegen dem Trend, der gewöhnlicherweise für amphiphile Blockcopolymere beobachtet wird. Die Verkürzung des Dextran-Blocks fördert die Ausbildung vesikulärer Strukturen, was dem Verhalten der amphiphilen Gegenspieler der DHBC-Systeme entspricht. Die funktionelle Gruppe zur Verbindung der beiden Blöcke hat zwar einen Einfluss auf die Morphologie der gebildeten Aggregate, nicht jedoch auf die eigentliche Fähigkeit der Systeme zur Selbstorganisation. Die Dex6500-b-PEG5500-Vesikel wiesen zudem eine langsame Bildungskinetik in Gegenwart von Con-A-Lectin auf. Des Weiteren waren sowohl Dex6500-b-PEG5500 als auch das quervernetzte Derivate dieses Copolymers in der Lage, Fluoreszenzfarbstoffe einzulagern. Um zu zeigen, dass wässrige Zwei-Phasen-Systeme (aqueous two phase systems – ATPS) eine belastbare Grundlage für die Untersuchung und Entwicklung selbstorganisierender DHBC-Systeme sind, wurden weitere Dextran-basierte Copolymere synthetsisiert: Dextran-b-Poly(vinylalokohol) und Detran-b-Poly(vinylpyrrolidon). In einem zweiten Teil dieser Arbeit wurde das zuvor erarbeitete Prinzip auf auf Polypeptidsysteme ausgeweitet. Dazu wurde ein Poly(N-Hydroxyethylglutamin)-block-Poly(ethylenglycol)-Copolymer hergestellt. Dieses Copolymer, dessen emulgierenden Eigenschaften bereits bekannt waren, wies unmittelbar nach Lösung des Feststoffes in Wasser Vesikelbildung auf. In einem dritten Teil der Studie wurden thermoresponsive Copolymere hergestellt und untersucht: Dextran-b-PNIPAMm. Unterhalb der LCST konnte die Bildung von Aggregaten nachgewiesen werden, deren Struktur nicht zweifelsfrei entschlüsselt werden konnte, wobei jedoch zahlreiche Hinweise auf eine vesikuläre Struktur hindeuten. Oberhalb der LCST wurde durch die Kollabierung der PNIPAM-Ketten die Bildung stabiler Strukturen mit Radien von mehreren hundert Nanometern induziert, deren weitere Entwicklung durch eine weitere Temperaturerhöhung gefördert werden konnte. Durch Rückkühlung in den Temperaturebereich unterhalb der LCST konnten die zuvor beobachteten Aggregate reversibel zurückgebildet werden. Das Selbstorganisationsverhalten von DHBC, unabhängig vom Einfluss des pH-Werts, der Ionenstärke oder der Temperatur are bisher nur in sehr geringem Umfang Gegenstand wissenschaftlicher Veröffentlichungen. Diese Arbeit stellt damit den ersten umfassenden Beitrag zur systematischen Erarbeitung dieses Phänomens dar. Es konnten dabei zwei Ursachen für die beobachteten Selbstorganisationseffekte bestimmt werden: die Inkompatibilität der beiden Polymerblöcke (enthalpischer Effekt) und der Unterschied in deren Löslichkeit (enthalpische und entropische Effekte). Der entropische Beitrag zur positiven Gibbs’schen Freien Mischungsenergie wird dem selben Verlust konformativer Entropie zugeordnet, der auch für den hydrophoben Effekt verantwortlich ist, allerdings angetrieben durch einen Wettbewerb der beiden Polymerblöcke um das Wasser. In diesem Sinne kann man das beobachtete Phänomen als „hydrophilen Effekt“ bezeichnen. KW - Selbstorganisation KW - Blockcopolymere KW - hydrophil KW - self-assembly KW - copolymers KW - hydrophilic Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-54163 ER - TY - JOUR A1 - Utecht, Manuel Martin A1 - Klamroth, Tillmann A1 - Saalfrank, Peter T1 - Optical absorption and excitonic coupling in azobenzenes forming self-assembled monolayers a study based on density functional theory JF - Physical chemistry, chemical physics : a journal of European Chemical Societies N2 - Based on the analysis of optical absorption spectra, it has recently been speculated that the excitonic coupling between individual azobenzene-functionalized alkanethiols arranged in a self-assembled monolayer (SAM) on a gold surface could be strong enough to hinder collective trans-cis isomerization-on top of steric hindrance [Gahl et al., J. Am. Chem. Soc., 2010, 132, 1831]. Using models of SAMs of increasing complexity (dimer, linear N-mers, and two-dimensionally arranged N-mers) and density functional theory on the (TD-) B3LYP/6-31G* level, we determine optical absorption spectra, the nature and magnitude of excitonic couplings, and the corresponding spectral shifts. It is found that at inter-monomer distances of about 20 angstrom and above, TD-B3LYP excitation frequencies (and signal intensities) can be well described by the frequently used point-dipole approximation. Further, calculated blue shifts in optical absorption spectra account for the experimental observations made for azobenzene/gold SAMs, and hint to the fact that they can indeed be responsible for reduced switching probability in densely packed self-assembled structures. Y1 - 2011 U6 - https://doi.org/10.1039/c1cp22793a SN - 1463-9076 VL - 13 IS - 48 SP - 21608 EP - 21614 PB - Royal Society of Chemistry CY - Cambridge ER - TY - THES A1 - Unterlass, Miriam Margarethe T1 - From monomer salts and their tectonic crystals to aromatic polyimides : development of neoteric synthesis routes Y1 - 2011 CY - Potsdam ER - TY - GEN A1 - Troll, K. A1 - Kulkarni, Amit A1 - Wang, W. A1 - Darko, C. A1 - Koumba, A. M. Bivigou A1 - Laschewsky, André A1 - Müller-Buschbaum, Peter A1 - Papadakis, Christine M. T1 - The collapse transition of poly(styrene-b-(N-isopropyl acrylamide)) diblock copolymers in aqueous solution and in thin films T2 - Colloid and polymer science : official journal of the Kolloid-Gesellschaft Y1 - 2011 U6 - https://doi.org/10.1007/s00396-010-2344-1 SN - 0303-402X VL - 289 IS - 2 SP - 227 EP - 227 PB - Springer CY - New York ER - TY - JOUR A1 - Tremblay, Jean Christophe A1 - Klinkusch, Stefan A1 - Klamroth, Tillmann A1 - Saalfrank, Peter T1 - Dissipative many-electron dynamics of ionizing systems JF - The journal of chemical physics : bridges a gap between journals of physics and journals of chemistr N2 - In this paper, we perform many-electron dynamics using the time-dependent configuration-interaction method in its reduced density matrix formulation (rho-TDCI). Dissipation is treated implicitly using the Lindblad formalism. To include the effect of ionization on the state-resolved dynamics, we extend a recently introduced heuristic model for ionizing states to the rho-TDCI method, which leads to a reduced density matrix evolution that is not norm-preserving. We apply the new method to the laser-driven excitation of H(2) in a strongly dissipative environment, for which the state-resolve lifetimes are tuned to a few femtoseconds, typical for dynamics of adsorbate at metallic surfaces. Further testing is made on the laser-induced intramolecular charge transfer in a quinone derivative as a model for a molecular switch. A modified scheme to treat ionizing states is proposed to reduce the computational burden associated with the density matrix propagation, and it is thoroughly tested and compared to the results obtained with the former model. The new approach scales favorably (similar to N(2)) with the number of configurations N used to represent the reduced density matrix in the rho-TDCI method, as compared to a N(3) scaling for the model in its original form. Y1 - 2011 U6 - https://doi.org/10.1063/1.3532410 SN - 0021-9606 VL - 134 IS - 4 PB - American Institute of Physics CY - Melville ER - TY - JOUR A1 - Tremblay, Jean Christophe T1 - Laser control of molecular excitations in stochastic dissipative media JF - The journal of chemical physics : bridges a gap between journals of physics and journals of chemistr N2 - In the present work, ideas for controlling photochemical reactions in dissipative environments using shaped laser pulses are presented. New time-local control algorithms for the stochastic Schrodinger equation are introduced and compared to their reduced density matrix analog. The numerical schemes rely on time-dependent targets for guiding the reaction along a preferred path. The methods are tested on the vibrational control of adsorbates at metallic surfaces and on the ultrafast electron dynamics in a strong dissipative medium. The selective excitation of the specific states is achieved with improved yield when using the new algorithms. Both methods exhibit similar convergence behavior and results compare well with those obtained using local optimal control for the reduced density matrix. The favorable scaling of the methods allows to tackle larger systems and to control photochemical reactions in dissipative media of molecules with many more degrees of freedom. Y1 - 2011 U6 - https://doi.org/10.1063/1.3587093 SN - 0021-9606 VL - 134 IS - 17 PB - American Institute of Physics CY - Melville ER - TY - JOUR A1 - Tiseanu, Carmen A1 - Parvulescu, Vasile I. A1 - Boutonnet, Magali A1 - Cojocaru, Bogdan A1 - Primus, Philipp A. A1 - Teodorescu, Cristian M. A1 - Solans, Conchita A1 - Sanchez Dominguez, Margarita T1 - Surface versus volume effects in luminescent ceria nanocrystals synthesized by an oil-in-water microemulsion method JF - Physical chemistry, chemical physics : a journal of European Chemical Societies N2 - Pure and europium (Eu3+) doped cerium dioxide (CeO2) nanocrystals have been synthesized by a novel oil-in-water microemulsion reaction method under soft conditions. In-situ X-ray diffraction and RAMAN spectroscopy, high-resolution transmission electron microscopy, UV/Vis diffuse-reflectance and Fourier transform infrared spectroscopy as well as time-resolved photoluminescence spectroscopy were used to characterize the nanaocrystals. The as-synthesized powders are nanocrystalline and have a narrow size distribution centered on 3 nm and high surface area of similar to 250 m(2) g(-1). Only a small fraction of the europium ions substitutes for the bulk, cubic Ce4+ sites in the europium-doped ceria nanocrystals. Upon calcination up to 1000 degrees C, a remarkable high surface area of similar to 120 m(2) g (-1) is preserved whereas an enrichment of the surface Ce4+ relative to Ce3+ ions and relative strong europium emission with a lifetime of similar to 1.8 ms and FWHM as narrow as 10 cm(-1) are measured. Under excitation into the UV and visible spectral range, the europium doped ceria nanocrystals display a variable emission spanning the orange-red wavelengths. The tunable emission is explained by the heterogeneous distribution of the europium dopants within the ceria nanocrystals coupled with the progressive diffusion of the europium ions from the surface to the inner ceria sites and the selective participation of the ceria host to the emission sensitization. Effects of the bulk-doping and impregnation with europium on the ceria host structure and optical properties are also discussed. Y1 - 2011 U6 - https://doi.org/10.1039/c1cp21135h SN - 1463-9076 VL - 13 IS - 38 SP - 17135 EP - 17145 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Thuenemann, Andreas F. A1 - Klobes, Peter A1 - Wieland, Christoph A1 - Bruzzano, Stefano T1 - On the nanostructure of micrometer-sized cellulose beads JF - Analytical & bioanalytical chemistry N2 - The analysis of the porosity of materials is an important and challenging field in analytical chemistry. The gas adsorption and mercury intrusion methods are the most established techniques for quantification of specific surface areas, but unfortunately, dry materials are mandatory for their applicability. All porous materials that contain water and other solvents in their functional state must be dried before analysis. In this process, care has to be taken since the removal of solvent bears the risk of an incalculable alteration of the pore structure, especially for soft materials. In the present paper, we report on the use of small-angle X-ray scattering (SAXS) as an alternative analysis method for the investigation of the micro and mesopores within cellulose beads in their native, i.e., water-swollen state; in this context, they represent a typical soft material. We show that even gentle removal of the bound water reduces the specific surface area dramatically from 161 to 109 m(2) g(-1) in cellulose bead sample type MT50 and from 417 to 220 m(2) g(-1) in MT100. Simulation of the SAXS curves with a bimodal pore size distribution model reveals that the smallest pores with radii up to 10 nm are greatly affected by drying, whereas pores with sizes in the range of 10 to 70 nm are barely affected. The SAXS results were compared with Brunauer-Emmett-Teller results from nitrogen sorption measurements and with mercury intrusion experiments. KW - Small-angle X-ray scattering KW - Cellulose KW - Mesopores KW - Micropores KW - Porosimetry Y1 - 2011 U6 - https://doi.org/10.1007/s00216-011-5176-z SN - 1618-2642 VL - 401 IS - 4 SP - 1101 EP - 1108 PB - Springer CY - Heidelberg ER - TY - JOUR A1 - Thiel, Kerstin A1 - Klamroth, Tillmann A1 - Strauch, Peter A1 - Taubert, Andreas T1 - On the interaction of ascorbic acid and the tetrachlorocuprate ion [CuCl4](2-) in CuCl nanoplatelet formation from an ionic liquid precursor (ILP) JF - Physical chemistry, chemical physics : a journal of European Chemical Societies N2 - The formation of CuCl nanoplatelets from the ionic liquid precursor (ILP) butylpyridinium tetrachlorocuprate [C4Py](2)[CuCl4] using ascorbic acid as a reducing agent was investigated. In particular, electron paramagnetic resonance (EPR) spectroscopy was used to evaluate the interaction between ascorbic acid and the Cu(II) ion before reduction to Cu(I). EPR spectroscopy suggests that the [CuCl4](2-) ion in the neat IL is a distorted tetrahedron, consistent with DFT calculations. Addition of ascorbic acid leads to the removal of one chloride from the [CuCl4](2-) anion, as shown by DFT and the loss of symmetry by EPR. DFT furthermore suggests that the most stable adduct is formed when only one hydroxyl group of the ascorbic acid coordinates to the Cu(II) ion. Y1 - 2011 U6 - https://doi.org/10.1039/c1cp20648f SN - 1463-9076 VL - 13 IS - 30 SP - 13537 EP - 13543 PB - Royal Society of Chemistry CY - Cambridge ER - TY - THES A1 - ten Brummelhuis, Niels T1 - Self-assembly of cross-linked polymer micelles into complex higher-order aggregates T1 - Selbstorganisation von vernetzten Polymermizellen zu Komplexen Aggregaten mit höherer Ordnung N2 - The creation of complex polymer structures has been one of the major research topics over the last couple of decades. This work deals with the synthesis of (block co-)polymers, the creation of complex and stimuli-responsive aggregates by self-assembly, and the cross-linking of these structures. Also the higher-order self-assembly of the aggregates is investigated. The formation of poly-2-oxazoline based micelles in aqueous solution and their simultaneous functionalization and cross-linking using thiol-yne chemistry is e.g. presented. By introducing pH responsive thiols in the core of the micelles the influence of charged groups in the core of micelles on the entire structure can be studied. The charging of these groups leads to a swelling of the core and a decrease in the local concentration of the corona forming block (poly(2-ethyl-2-oxazoline)). This decrease in concentration yields a shift in the cloud point temperature to higher temperatures for this Type I thermoresponsive polymer. When the swelling of the core is prohibited, e.g. by the introduction of sufficient amounts of salt, this behavior disappears. Similar structures can be prepared using complex coacervate core micelles (C3Ms) built through the interaction of weakly acidic and basic polymer blocks. The advantage of these structures is that two different stabilizing blocks can be incorporated, which allows for more diverse and complex structures and behavior of the micelles. Using block copolymers with either a polyanionic or a polycationic block C3Ms could be created with a corona which contains two different soluble nonionic polymers, which either have a mixed corona or a Janus type corona, depending on the polymers that were chosen. Using NHS and EDC the micelles could easily be cross-linked by the formation of amide bonds in the core of the micelles. The higher-order self-assembly behavior of these core cross-linked complex coacervate core micelles (C5Ms) was studied. Due to the cross-linking the micelles are stabilized towards changes in pH and ionic strength, but polymer chains are also no longer able to rearrange. For C5Ms with a mixed corona likely network structures were formed upon the collapse of the thermoresponsive poly(N-isopropylacrylamide) (PNIPAAm), whereas for Janus type C5Ms well defined spherical aggregates of micelles could be obtained, depending on the pH of the solution. Furthermore it could be shown that Janus micelles can adsorb onto inorganic nanoparticles such as colloidal silica (through a selective interaction between PEO and the silica surface) or gold nanoparticles (by the binding of thiol end-groups). Asymmetric aggregates were also formed using the streptavidin-biotin binding motive. This is achieved by using three out of the four binding sites of streptavidin for the binding of one three-arm star polymer, end-functionalized with biotin groups. A homopolymer with one biotin end-group can be used to occupy the last position. This binding of two different polymers makes it possible to create asymmetric complexes. This phase separation is theoretically independent of the kind of polymer since the structure of the protein is the driving force, not the intrinsic phase separation between polymers. Besides Janus structures also specific cross-linking can be achieved by using other mixing ratios. N2 - In den letzten Jahrzehnten war die Herstellung von komplizierten Polymerstrukturen ein wichtiges Forschungsthema für Polymerchemiker. Diese Arbeit behandelt die Synthese von (Blockco-)Polymere, die Herstellung von komplexen und stimulus-responsiven Aggregaten (Mizellen) durch Selbstorganisation, sowie die Vernetzung dieser Strukturen. Auch die Anordnung dieser Mizellen zu Aggregaten mit höherer Ordnung wurde untersucht. Zum Beispiel wird die Bildung von Poly(2-oxazolin) basierter Mizellen in wässriger Lösung und die gleichzeitige Funktionalisierung und Vernetzung dieser Mizellen mittels Thiol-In-Chemie beschrieben. Durch die Einführung von pH-responsiven Gruppen in den Kern der Mizellen konnte der Einfluss von geladenen Gruppen im Kern auf das gesamte Aggregat untersucht werden. Das Einführen von Ladung führt zum Quellen des Mizellkerns und damit zu einer niedrigeren lokalen Konzentration von wasserlöslichem Poly(2-ethyl-2-oxazolin) (PEtOx). Diese niedrigere Konzentration ergibt eine Verschiebung des Trübungspunkt dieses Typ I thermoresponsiven Polymers zu höheren Temperaturen. Wenn die Ausdehnung des Kerns nicht erfolgt, z.B. in Anwesenheit einer hohen Salzkonzentration, findet dieser Effekt nicht statt. Ähnliche Strukturen können mithilfe von Mizellen mit komplexen Koazervatkern (English: Complex Coacervate Core Micelles, C3Ms) durch die Interaktion zwischen Polymeren mit negativ und positiv geladenen Blöcken hergestellt werden. Der Vorteil dieser Strukturen ist, dass zwei verschiedene stabilisierende Polymerblöcke in einem Aggregat vereint werden können, was zur Bildung einer Vielzahl noch komplizierterer Strukturen und zu mehr Responsivität führen kann. Mithilfe von Blockcopolymeren, bestehend aus jeweils einen polyionischen Block und einem neutralen Block (z.B. PEtOx, PEO oder poly(N-isopropylacrylamid) (PNIPAAm)), konnten C3Ms hergestellt werden, in denen zwei neutrale Polymere vereint wurden. Es konnte gezeigt werden, dass diese Polymere sowohl gemischt als auch phasensepariert vorliegen können (letzteres ergibt Janus Mizellen), abhängig welche Polymere gewählt werden. Durch Vernetzung im Kern konnten die Mizellen stabilisiert und fixiert werden (C5Ms). Die Selbstanordnung dieser vernetzten Mizellen zu größeren Aggregaten wurde untersucht. Wenn eine Lösung mit vernetzten Mizellen über den Trübungspunkt von PNIPAAm erhitzt wurde, bildeten sich Netzwerke aus Mizellen mit einer gemischten Korona, während Janus Mizellen sich zu wohldefinierten Aggregaten höherer Ordnung anordneten. Weiterhin konnte gezeigt werden, dass Janus Mizellen sich auf der Oberfläche von anorganischen Nanopartikeln anlagern können; z.B. durch die selektive Wechselwirkung zwischen PEO und Silica oder durch die Adsorption von Thiolgruppen auf Gold-Nanopartikeln. Asymmetrische Aggregate konnten auch mithilfe des Streptavidin-Biotin Komplexes erhalten werden. Durch das Binden der Biotin-Endgruppen eines dreiarmigen Sternpolymeren an eine Streptavidin-Einheit und anschließende Belegung der verbliebenen Bindungsstelle mit der Biotin-gruppe eines Homopolymers, können sehr spezifisch zwei verschiedene Polymere in einem Janus Aggregat vereint werden. Auch die Vernetzung des Streptavidins kann erzielt werden, indem andere Mischverhältnisse gewählt werden. KW - Polymerchemie KW - Selbstorganisation KW - Mizellen KW - Janus KW - Vernetzung KW - Polymer chemistry KW - self-assembly KW - micelles KW - Janus KW - cross-linking Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-52320 ER - TY - THES A1 - Tan, Irene T1 - Towards greener stationary phases : thermoresponsive and carbonaceous chromatographic supports T1 - Zu grüner Separation : thermoresponsive und kohlenstoffhaltige chromatographische Trägermaterialien N2 - Polymers which are sensitive towards external physical, chemical and electrical stimuli are termed as ‘intelligent materials’ and are widely used in medical and engineering applications. Presently, polymers which can undergo a physical change when heat is applied at a certain temperature (cloud point) in water are well-studied for this property in areas of separation chemistry, gene and drug delivery and as surface modifiers. One example of such a polymer is the poly (N-isopropylacrylamide) PNIPAAM, where it is dissolved well in water below 32 oC, while by increasing the temperature further leads to its precipitation. In this work, an alternative polymer poly (2-(2-methoxy ethoxy)ethyl methacrylate-co- oligo(ethylene glycol) methacrylate) (P(MEO2MA-co-OEGMA)) is studied due to its biocompatibility and the ability to vary its cloud points in water. When a layer of temperature responsive polymer was attached to a single continuous porous piece of silica-based material known as a monolith, the thermoresponsive characteristic was transferred to the column surfaces. The hybrid material was demonstrated to act as a simple temperature ‘switch’ in the separation of a mixture of five steroids under water. Different analytes were observed to be separated under varying column temperatures. Furthermore, more complex biochemical compounds such as proteins were also tested for separation. The importance of this work is attributed to separation processes utilizing environmentally friendly conditions, since harsh chemical environments conventionally used to resolve biocompounds could cause their biological activities to be rendered inactive. N2 - Polymere, welche empfindlich gegenüber externen physikalischen, chemischen und elektrischen Einflüssen sind, werden „intelligente Materialien“ genannt. Diese werden weitverbreitet in medizinischen und technischen Anwendungen eingesetzt. Auf diesem Gebiet ausführlich erforschte Materialien sind Polymere, welche durch Hitze bei einer bestimmten Temperatur (Trübungspunkt) eine physikalische Veränderung eingehen können, genannt thermoresponsive Polymere. Eingesetzt werden diese z.B. in chromatographischen Trennverfahren, in Gen- und Wirkstofftransport Vorgängen und zur Oberflächenmodifikation. Ein Beispiel für so ein Polymer ist das poly(N-isopropylacrylamide) PNIPAAM, welches unter 32 °C in Wasser gelöst vorliegt und mit Erhöhung der Temperatur als Niederschlag ausfällt. In dieser Arbeit wurde ein alternatives Polymer, das poly(2-(2-methoxyethoxy)ethylmethacrylate-co-oligo(ethyleneglycol) methacrylate) (P(MEO2MA-co-OEGMA)), untersucht, in Bezug auf Biokompatibilität und der Änderung des Trübungspunktes in Wasser. Wenn eine Schicht eines temperaturempfindlichen Polymers auf einen Monolithen (einteiliger, poröser und auf Silika-basierendes Material) aufgebracht wird, werden die thermoresponsiven Eigenschaften auf die Oberfläche dieses Monolithen übertragen. Der Monolith dient hier als Säule in einer HPLC-Anlage. Es wurde gezeigt, dass das Hybrid-Material als einfacher „Temperaturschalter“ in der Trennung von fünf verschiedenen Steroiden in Wasser agieren kann. Untersucht wurde die Separation verschiedener Analyten mit dem Variieren der Säulentemperatur. Zusätzlich wurden mehr komplexe biochemische Stoffe, wie Proteine, getestet. Die Bedeutung dieser Arbeit ist zurückzuführen auf Separationsprozesse, welche umweltfreundlichen Bedingungen nutzen, da die rauen chemischen Bedingungen in konventionellen Separationsprozessen die biologische Inaktivität der Verbindungen zur Folge haben können. Der zweite Teil der Arbeit beschäftigte sich mit der Entwicklung eines alternativen Trägermaterials als Ersatz zu den Silika-basierende Trennungssäulen. Kohlenstoffmaterialien sind aufgrund ihrer ausgezeichneten mechanischen Härte und chemischen Stabilität eine vielversprechend Alternative. Die Synthese von Kohlenstoffkugeln als Trägermaterial kann als „grüner“ Prozess in meiner Arbeit angesehen werden, da milde Synthesebedingungen in purem Wasser verwendet wurden. Die Leistungsfähigkeit des Materials wurde mit einer Serie von Separationsreaktionen gezeigt. KW - thermoresponsive KW - poly(N-isopropylacrylamide) KW - oligo(ethyleneglycol) KW - Monolith KW - Chromatographie KW - thermoresponsive KW - poly(N-isopropyl acrylamide) KW - oligo(ethylene glycol) KW - monolith KW - chromatography Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-53130 ER - TY - JOUR A1 - Stojanovic, Milovan A1 - Markovic, Rade A1 - Kleinpeter, Erich A1 - Baranac-Stojanovic, Marija T1 - endo-Mode cyclizations of vinylogous N-acyliminium ions as a route to the synthesis of condensed thiazolidines Y1 - 2011 SN - 0040-4020 ER - TY - JOUR A1 - Stojanovic, Milovan A1 - Markovic, Rade A1 - Kleinpeter, Erich A1 - Baranac-Stojanovic, Marija T1 - Endo-Mode cyclizations of vinylogous N-acyliminium ions as a route to the synthesis of condensed thiazolidines JF - Tetrahedron N2 - endo-Mode cyclizations of vinylogous N-acyliminium ions incorporating heteroatom-based nucleophiles have been examined as a route to the synthesis of condensed thiazolidines. The scope of these reactions and stereochemical outcome are discussed and explained using quantum chemical calculations. KW - Vinylogous N-acyliminium ion KW - endo-Mode cyclization KW - Condensed thiazolidines KW - Quantum chemical calculations Y1 - 2011 U6 - https://doi.org/10.1016/j.tet.2011.10.011 SN - 0040-4020 VL - 67 IS - 49 SP - 9541 EP - 9554 PB - Elsevier CY - Oxford ER - TY - JOUR A1 - Skrabania, Katja A1 - Miasnikova, Anna A1 - Bivigou Koumba, Achille Mayelle A1 - Zehm, Daniel A1 - Laschewsky, André T1 - Examining the UV-vis absorption of RAFT chain transfer agents and their use for polymer analysis JF - Polymer Chemistry N2 - The absorption characteristics of a large set of thiocarbonyl based chain transfer agents (CTAs) were studied by UV-vis spectroscopy in order to identify appropriate conditions for exploiting their absorbance bands in end-group analysis of polymers prepared by reversible addition-fragmentation chain transfer (RAFT) polymerisation. Substitution pattern and solvent polarity were found to affect notably the wavelengths and intensities of the pi-pi*- and n-pi*-transition of the thiocarbonyl bond of dithioester and trithiocarbonate RAFT agents. Therefore, it is advisable to refer in end group analysis to the spectral parameters of low molar mass analogues of the active polymer chain ends, rather than to rely on the specific RAFT agent engaged in the polymerisation. When using appropriate conditions, the quantification of the thiocarbonyl end-groups via the pi-pi* band of the thiocarbonyl moiety around 300-310 nm allows a facile, sensitive and surprisingly precise estimation of the number average molar mass of the polymers produced, without the need of particular end group labels. Moreover, when additional methods for absolute molar mass determination can be applied, the quantification of the thiocarbonyl end-groups by UV-spectroscopy provides a good estimate of the degree of active end group for a given polymer sample. Y1 - 2011 U6 - https://doi.org/10.1039/c1py00173f SN - 1759-9954 VL - 2 IS - 9 SP - 2074 EP - 2083 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Shkilnyy, Andriy A1 - Schöne, Stefanie A1 - Rumplasch, Claudia A1 - Uhlmann, Annett A1 - Hedderich, Annett A1 - Günter, Christina A1 - Taubert, Andreas T1 - Calcium phosphate mineralization with linear poly(ethylene imine) a time-resolved study JF - Colloid and polymer science : official journal of the Kolloid-Gesellschaft N2 - We have earlier shown that linear poly(ethylene imine) (LPEI) is an efficient growth modifier for calcium phosphate mineralization from aqueous solution (Shkilnyy et al., Langmuir, 2008, 24 (5), 2102). The current study addresses the growth process and the reason why LPEI is such an effective additive. To that end, the solution pH and the calcium and phosphate concentrations were monitored vs. reaction time using potentiometric, complexometric, and photometric methods. The phase transformations in the precipitates and particle morphogenesis were analyzed by X-ray diffraction and transmission electron microscopy, respectively. All measurements reveal steep decreases of the pH, calcium, and phosphate concentrations along with a rapid precipitation of brushite nanoparticles early on in the reaction. Brushite transforms into hydroxyapatite (HAP) within the first 2 h, which is much faster than what is reported, for example, for calcium phosphate precipitated with poly(acrylic acid). We propose that poly(ethylene imine) acts as a proton acceptor (weak buffer), which accelerates the transformation from brushite to HAP by taking up the protons that are released from the calcium phosphate precipitate during the phase transformation. KW - Calcium phosphate KW - Polyethylene imine KW - Mineralization KW - Kinetics Y1 - 2011 U6 - https://doi.org/10.1007/s00396-011-2403-2 SN - 0303-402X VL - 289 IS - 8 SP - 881 EP - 888 PB - Springer CY - New York ER - TY - JOUR A1 - Shainyan, Bagrat A. A1 - Suslova, Elena N. A1 - Kleinpeter, Erich T1 - Conformational analysis of N-phenyl- and N-trifyl-4,4-dimethyl-4-silathiane 1-sulfimides JF - Journal of physical organic chemistry N2 - N-Substituted 4,4-dimethyl-4-silathiane 1-sulfimides Me2Si(sic)S=NSO2R [R- Ph (1), CF3 (2)] were studied experimentally by variable temperature dynamic NMR spectroscopy. Low temperature 13 C NMR spectra of the two compounds revealed the frozen ring inversion process and approximately equal content of the axial and equatorial conformers. Calculations of the 4-silathiane derivatives 1, 2 and the model compound [R Me (3)] as well as their carbon analogs, the similarly N-substituted (sic)S=NSO2R thiane 1-sulfimides [R = Ph (4), CF3 (5), Me (6)] at the DFT/B3LYP/6-311G(d, p) level in the gas phase and in chloroform solution using the PCM model at the same level of theory showed a strong dependence of the relative stability of the conformer on the solvent. The electronegative trifluoromethyl group increases the relative stability of the axial conformer. KW - 4-silathianes KW - conformational analysis KW - dynamic NMR KW - quantum chemical calculations KW - sulfimides Y1 - 2011 U6 - https://doi.org/10.1002/poc.1811 SN - 0894-3230 VL - 24 IS - 8 SP - 698 EP - 704 PB - Wiley-Blackwell CY - Malden ER - TY - JOUR A1 - Senge, Mathias O. A1 - Ryppa, Claudia A1 - Fazekas, Marijana A1 - Zawadzka, Monika A1 - Dahms, Katja T1 - 5,10-A2B2-Type meso-Substituted PorphyrinsuA Unique Class of Porphyrins with a Realigned Dipole Moment JF - Chemistry - a European journal N2 - Current applications in porphyrin chemistry require the use of unsymmetrically substituted porphyrins. Many current industrial interests in optics and biomedicine require systems with either pushpull (electron-donating and -withdrawing groups) or amphiphilic systems (hydrophobic and hydrophilic groups). In this context we present the class of 5,10-A2B2-type porphyrins for which two different substituents are positioned in diagonally opposite meso positions. Thus, the intramolecular dipole moment in these tetrapyrroles is positioned along a beta-beta vector passing through two pyrrole rings. This is opposite to the situation of the frequently used 5,15-A2BC porphyrins for which the dipole moment is oriented along a mesomeso axis. We have elaborated syntheses of the 5,10-A2B2 porphyrins by using transition-metal-catalyzed transformations of 5,10-A2 porphyrins or direct substitutions reactions thereof; this gives the target molecules in 2277% overall yields. The compounds exhibit interesting structural, spectroscopic, and optical features and can serve as building blocks for new porphyrin arrays and applications. KW - macrocycles KW - nitrogen heterocycles KW - nonlinear optics KW - porphyrinoids KW - tetrapyrroles Y1 - 2011 U6 - https://doi.org/10.1002/chem.201101934 SN - 0947-6539 VL - 17 IS - 48 SP - 13562 EP - 13573 PB - Wiley-VCH CY - Weinheim ER - TY - THES A1 - Schwadtke, Ulrike T1 - Synthese und Charakterisierung von partiell fluorierten Blockcopolymeren Y1 - 2011 CY - Potsdam ER - TY - THES A1 - Schumacher, Soeren T1 - Saccharide recognition : boronic acids as receptors in polymeric networks T1 - Zuckererkennung in polymeren Netzwerken mittels Boronsäuren als Rezeptoren N2 - In this thesis entitled “Saccharide Recognition - Boronic acids as Receptors in Polymeric Networks” different aspects of boronic acid synthesis, their analysis and incorporation or attachment to different polymeric networks and characterisation thereof were investigated. The following key aspects were considered: • Provision of a variety of different characterised arylboronic acids and benzoboroxoles • Attachment of certain derivatives to nanoparticles and the characterisation of saccharide binding by means of isothermal titration calorimetry and displacement assay (ARS) to enhance the association constant to saccharides at pH 7.4 • Enhancement of selectivity in polymeric systems by means of molecular imprinting using fructose as template and a polymerisable benzoboroxole as functional monomer for the recognition at pH 7.4 (Joined by a diploma thesis of F. Grüneberger) • Development of biomimetic saccharide structures and the development of saccharide (especially glucose and fructose) binding MIPs by using these structures as template molecules. In the first part of the thesis different arylboronic acid derivatives were synthesised and their binding to glucose or fructose was investigated by means of isothermal titration calorimetry (ITC). It could be derived, which is in parallel to the literature, that derivatives bearing a methylhydroxyl-group in ortho-position to the boron (benzoboroxole) exhibit in most cases a two-fold higher association constant compared to the corresponding phenylboronic acid derivative. To gain a deeper understanding NMR spectroscopy and mass spectrometry with the benzoboroxole and glucose or fructose was performed. It could be shown that the exchange rate in terms of NMR time scale is quite slow since in titration experiments new peaks appeared. Via mass spectrometry of a mixture between benzoboroxole and glucose or fructose, different binding stoichiometries could be detected showing that the binding of saccharides is comparable with their binding to phenylboronic acid. In addition, the use of Alizarin Red S as an electrochemical reporter was described for the first time to monitor the saccharide binding to arylboronic acids not only with spectroscopy. Here, the redox behaviour and the displacement were recorded by cyclic voltammograms. In the second part different applications of boronic acids in polymeric networks were investigated. The attachment of benzoboroxoles to nanoparticles was investigated and monitored by means of isothermal titration calorimetry and a colourimetric assay with Alizarin Red S as the report dye. The investigations by isothermal titration calorimetry compared the fructose binding of arylboronic acids and benzoboroxoles coupled to these nanoparticles and “free” in solution. It could be shown that the attached derivatives showed a higher binding constant due to an increasing entropy term. This states for possible multivalent binding combined with a higher water release. Since ITC could not characterise the binding of glucose to these nanoparticles due to experimental restrictions the glucose binding at pH 7.4 was shown with ARS. Here, the displacement of ARS by fructose and also glucose could be followed and consequently these nanoparticles can be used for saccharide determination. Within this investigation also the temperature stability of these nanoparticles was examined and after normal sterilisation procedures (121°C, 20 min.) the binding behaviour was still unchanged. To target the selectivity of the used polymeric networks, molecular imprinting was used as a technique for creating artificial binding pockets on a molecular scale. As functional monomer 3-methacrylamidobenzoboroxole was introduced for the recognition of fructose. In comparison to polymers prepared with vinylphenylboronic acid the benzoboroxole containing polymer had a stronger binding at pH 7.4 which was shown for the first time. In addition, another imprinted polymer was synthesised especially for the recognition of glucose and fructose employing biomimetic saccharide analogues as template molecule. The advantage to use the saccharide analogues is the defined template-functional monomer complex during the polymerisation which is not the case, for example, for glucose-boronic acid interaction. The biomimetic character was proven through structural superimposition of crystal structures of the analogues with already described crystal structures of boronic acid esters of glucose and fructose. A molecularly imprinted polymer was synthesised with vinylphenylboronic acid as the functional monomer to show that both glucose and fructose are able to bind to the polymer which was predicted by the structural similarity of the analogues. The major scientific contributions of this thesis are • the determination of binding constants for some, not yet reported saccharide – boronic acid / benzoboroxole pairs, • the use of ARS as electrochemical reporter for saccharide detection, • the thermodynamic characterisation of a saccharide binding nanoparticle system containing benzoboroxole and functioning at pH 7.4, • the use of a polymerisable benzoboroxole as functional monomer for saccharide recognition in neutral, aqueous environments • and the synthesis and utilisation of biomimetic saccharide analogues as template molecules especially for the development of a glucose binding MIP. N2 - Die vorliegende Arbeit beschäftigte sich mit der Synthese verschiedener Boronsäurederivate und deren Charakterisierung und Anbindung oder Einbau in polymeren Netzwerken. Die synthetisierten Polymere werden charakterisiert bezüglich ihrer Morphologie und besonders hinsichtlich ihrer Saccharidbindung. Im Wesentlichen wurden die folgenden Aspekte bearbeitet: • Bereitstellung einer Reihe von verschiedenen Arylboronsäuren und Benzoboroxolderivaten • Modifizierung von Nanopartikeln mit verschiedenen Derivaten aus der Bibliothek mit dem Ziel die Bindingkonstanten zu Monosacchariden bei pH 7.4. zu erhöhen. Dabei werden isothermale Titrationskalorimetrie und ein spektroskopischer Verdrängungsassay (Alizarin Rot S) zum Bindungsnachweis verwendet. • Erhöhung der Selektivität von Polymeren mittels molekularen Prägens von Fruktose als Matrizenmolekül. Durch den Einsatz eines polymerisierbaren Benzoboroxolderivatives konnte die Anbindung bei pH 7.4 stattfinden (Dieser Teil der Arbeit wurde durch eine Diplomarbeit von F. Grüneberger unterstützt). • Entwicklung von biomimetischen saccharidanalogen Strukturen, die als Matrizenmoleküle während des molekularen Prägens eingesetzt werden, um ein Polymer für die Anbindung von Monosacchariden wie etwa Fruktose oder Glukose zu generieren. Im ersten Teil der Arbeit wurde die Synthese und Charakterisierung von verschiedenen Boronsäurederivaten beschrieben. Die Charakterisierung der Bindungskonstanten wurde mittels isothermaler Titrationskalorimetrie durchgeführt. Dabei konnte im Einklang mit der Literatur gezeigt werden, dass Derivative, die zusätzlich mit einer Methylhydroxygruppe in ortho-Position zum Bor (Benzoboroxol) derivatisiert sind, eine meist zweifach höhere Bindungskonstante als gleich substituierte Arylboronsäurederivate aufweisen. Durch 1H-NMR-Spektroskopie und Massenspektrometrie mit Benzoboroxol und Glukose oder Fruktose konnten die Bindung weiter charakterisiert werden. Dabei zeigten die Ergebnisse der 1H-NMR-Spektroskopie, dass die Bindung bezogen auf NMR-Zeitskalen recht langsam stattfindet, da es zu einer Verbreiterung der Peaks kommt. Die Ergebnisse der Massenspektrometrie zeigen, dass hinsichtlich der Stöchiometrie der Binding verschiedene Komplexe möglich sind, was in ähnlicher Weise für Phenylboronsäure schon gezeigt wurde. Zusätzlich wurde in diesem Teil der Arbeit wurde die Elektrochemie von Alizarin Rot S untersucht, um den Farbstoff, der spektroskopisch schon für den Bindungsnachweis zwischen einem Boronsäurederivat und verschiedenen Zuckern beschrieben ist, auch elektrochemisch zu nutzen. Im zweiten Teil der Arbeit wurden verschiedene Anwendungen von den charakterisierten Boronsäuren in polymeren Netzwerken beschrieben. Dabei wurde zunächst ein Polystyrollatex mit Benzoboroxol modifiziert und die Bindung von Glukose oder Fruktose mittels isothermaler Titrationskalorimetrie und einem spektroskopischen Farbassay untersucht. Die Untersuchungen mittels isothermaler Titrationskalorimetrie (ITC) wurden vergleichend zu frei in Lösung befindlichem Benzoboroxol durchgeführt. Es wurde eine höhere Bindungskonstante für die modifizierten Nanopartikel ermittelt, was auf die Erhöhung der Entropie im System zurückzuführen ist. Dies kann durch eine mutivalente Bindung und einer einhergehenden erhöhten Wasserfreisetzung erklärt werden. Da es nicht möglich war, die Glukosebindung mittels ITC zu verfolgen, wurde zusätzlich ein spektroskopischer Assay bei pH 7.4. durchgeführt. Bei diesem wird die Bindung von Fruktose oder Glukose durch Freisetzung von Alizarin Rot S verfolgt. In diesem Zusammenhang konnte auch gezeigt werden, dass die Nanopartikel nach Sterilisation bei 121°C für 20 Minuten eine vergleichbare Bindung des Farbstoffes zeigen, was die Temperaturstabilität der Partikel unterstreicht. Da in diesem System die Bindung von Zuckern abhängig von der Affinität der Zucker zu den Boronsäuren bestimmt wird, wurden molekular geprägte Polymere synthetisiert, die eine Selektivität für bestimmte Zucker zeigen. Als Funktionsmonomer wurde 3-Methacrylamidobenzboroxol verwendet. Im Vergleich zu Polymeren, die mit 3-Vinylphenylboronsäure als literaturbekanntes Funktionsmonomer synthetisiert worden sind, zeigt sich bei pH 7.4 eine höhere Bindung von Fruktose an Benzoboroxolpolymere. In einem anderen geprägten Polymer wurden biomimetische (zuckeranaloge) Substanzen als Matrizenmolekül verwendet. Der Vorteil dieser Substanz ist die Bildung eines definierten Boronsäureesters, der als Templat-Funktionsmonomerkomplexes einpolymerisiert wird. Im Gegensatz dazu weist beispielsweise ein Boronsäureester der Glukose keine definierte Struktur auf. Der biomimetische Charakter wurde durch strukturelle Überlagerung mit schon publizierten Kristallstrukturen von Boronsäureestern von Glukose und Fruktose gezeigt. Das zugehörige molekular geprägte Polymer wurde mit Vinylphenylboronsäure synthetisiert und zeigt eine Bindung von Glukose und Fruktose, was durch die Strukturüberlagerungen vorhergesagt wurde. Zusammenfassend sind die wesentlichen wissenschaftlichen Ergebnisse: • Bindungskostanten von neuen Zucker-Benzoboroxolpaaren, • Eignung von ARS als elektrochemische Nachweissubstanz der Saccharidbindung • Die thermodynamische Charakterisierung der Bindung von Fruktose oder Glukose an Nanopartikel, die Benzoboroxol - modifziert sind und so bei pH 7.4 Zucker binden können • Einsatz von Benzoboroxol als Funktionsmonomer • die Synthese und Nutzung von biomimetischen zuckeranalogen Matrizenmolekülen für die Entwicklung von molekular geprägten Polymeren für die Glukosebindung. KW - Zuckererkennung KW - Glucose KW - physiolgischer pH KW - Boronsäure KW - Benzoboroxol KW - Saccharide Recognition KW - Glucose KW - physiological pH KW - boronic acid KW - benzoboroxole Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-52869 ER - TY - CHAP A1 - Schreiber, Ulrike A1 - Vukicevic, Radovan A1 - Beuermann, Sabine T1 - Block copolymers of poly(vinylidene fluoride) obtained via 1,3 dipolar cycloaddition T2 - Abstracts of papers : joint conference / The Chemical Institute of Cananda, CIC, American Chemical Society, ACS Y1 - 2011 SN - 0065-7727 VL - 242 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Schreiber, Ulrike A1 - Hosemann, Benjamin A1 - Beuermann, Sabine T1 - 1H,1H,2H,2H-Perfluorodecyl-Acrylate-Containing block copolymers from ARGET ATRP JF - Macromolecular chemistry and physics N2 - Block copolymers of 1H,1H,2H,2H-perfluorodecyl acrylate (AC8) were obtained from ARGET ATRP. To obtain block copolymers of low dispersity the PAC8 block was synthesized in anisole with a CuBr(2)/PMDETA catalyst in the presence of tin(II) 2-ethylhexanoate as a reducing agent. The PAC8 block was subsequently used as macroinitiator for copolymerization with butyl and tert-butyl acrylate carried out in scCO(2). To achieve catalyst solubility in CO(2) two fluorinated ligands were employed. The formation of block copolymers was confirmed by size exclusion chromatography and DSC. KW - atom transfer radical polymerization (ATRP) KW - block copolymers KW - fluoropolymers KW - supercritical carbon dioxide Y1 - 2011 U6 - https://doi.org/10.1002/macp.201000307 SN - 1022-1352 VL - 212 IS - 2 SP - 168 EP - 179 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Schmidt, Bernd A1 - Staude, Lucia A1 - Kelling, Alexandra A1 - Schilde, Uwe T1 - A Cross-Metathesis-Conjugate addition route to enantiopure gamma-Butyrolactams and gamma-Lactones from a C-2-Symmetric Precursor JF - European journal of organic chemistry N2 - A protected derivative of (3R, 4R)-hexa-1,5-diene-3,4-diol, a conveniently accessible C-2-symmetric building block, undergoes single or double cross metathesis with methyl acryl-ate. The cross metathesis products are amenable to stereoselective conjugate addition reactions and can be converted into either gamma-butyrolactones or gamma-lactams. KW - Lactams KW - Lactones KW - Oxygen heterocycles KW - Metathesis KW - Desymmetrization Y1 - 2011 U6 - https://doi.org/10.1002/ejoc.201001528 SN - 1434-193X IS - 9 SP - 1721 EP - 1727 PB - Wiley-Blackwell CY - Malden ER - TY - JOUR A1 - Schmidt, Bernd A1 - Krehl, Stefan T1 - A single precatalyst tandem RCM-allylic oxidation sequence JF - Chemical communications N2 - Ring closing metathesis of allyloxy styrenes and a subsequent Ru-catalyzed allylic oxidation can be combined to a tandem sequence that makes coumarins accessible using less active but more conveniently available first generation catalysts. Y1 - 2011 U6 - https://doi.org/10.1039/c1cc11347j SN - 1359-7345 VL - 47 IS - 20 SP - 5879 EP - 5881 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Schmidt, Bernd A1 - Hölter, Frank T1 - Suzuki-Miyaura cross coupling reactions with Phenoldiazonium salts JF - Organic & biomolecular chemistry : an international journal of synthetic, physical and biomolecular organic chemistry N2 - The Suzuki-Miyaura coupling of phenol diazonium salts and aryl trifluoroborates yields 4-hydroxybiaryls in a protecting group-free synthesis. Y1 - 2011 U6 - https://doi.org/10.1039/c1ob05256j SN - 1477-0520 VL - 9 IS - 13 SP - 4914 EP - 4920 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Schmidt, Bernd A1 - Geissler, Diana T1 - Olefin-Metathesis-Based Synthesis of Furans by an RCM/Deprotonation/Phosphorylation Sequence and Their Diels-Alder Reactions JF - European journal of organic chemistry N2 - Butenolides, obtained by ring-closing metathesis (RCM) of acrylates, undergo quantitative deprotonation with amide bases. Trapping of the resulting anions with electrophiles, for example, chlorophosphates, give furans. Subsequent DielsAlder reaction and acid-catalysed rearrangement of the resulting oxabicyclonorbornadienes give substituted benzenes. KW - Lactones KW - Metathesis KW - Ruthenium KW - Oxygen heterocycles KW - Metalation Y1 - 2011 U6 - https://doi.org/10.1002/ejoc.201101078 SN - 1434-193X IS - 35 SP - 7140 EP - 7147 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Schmidt, Bernd A1 - Geissler, Diana T1 - Ru- and Pd-Catalysed Synthesis of 2-Arylfurans by One-Flask Heck Arylation/Oxidation JF - European journal of organic chemistry N2 - 2,5-Disubstituted furans were synthesized by one-flask Heck arylation/oxidation sequences. The starting materials are 2-substituted 2,3-dihydrofurans, conveniently available by RCM/isomerization sequences, and arenediazonium salts. These react in ligand-free Heck reactions to afford 2,5-disub-stituted 2,5-dihydrofurans, which are oxidized to the corresponding furans without isolation or intermediate workup. The oxidation is conveniently achieved with chloranil or DDQ, depending on the substrate. KW - Diazonium salts KW - Palladium KW - C-C coupling KW - Heck coupling KW - Furans KW - Oxidation KW - Oxygen heterocycles Y1 - 2011 U6 - https://doi.org/10.1002/ejoc.201100549 SN - 1434-193X IS - 25 SP - 4814 EP - 4822 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Schmidt, Bernd A1 - Berger, René A1 - Kelling, Alexandra A1 - Schilde, Uwe T1 - Pd-Catalyzed [2+2+1] coupling of alkynes and arenes phenol diazonium salts as mechanistic trapdoors JF - Chemistry - a European journal N2 - Alkynes and phenol diazonium salts undergo a Pd-catalyzed [2+2+1] cyclization reaction to spiro[4,5]decatetraene-7-ones. This structure was confirmed for one example by X-ray single-crystal structure analysis. The reaction is believed to proceed through oxidative addition of the phenol diazonium cation to Pd(0), subsequent insertion of two alkynes, followed by irreversible spirocyclization. KW - alkynes KW - diazo compounds KW - palladium KW - phenols KW - spirocycles Y1 - 2011 U6 - https://doi.org/10.1002/chem.201100609 SN - 0947-6539 VL - 17 IS - 25 SP - 7032 EP - 7040 PB - Wiley-Blackwell CY - Malden ER - TY - THES A1 - Schenk, Anna Sophia T1 - On the structure of bio-inspired calcite-polymer hybrid crystal : hierarchical levels from the micrometer- to the †ngström-scale Y1 - 2011 CY - Potsdam ER - TY - THES A1 - Schaal, Janina T1 - Synthese und Photochemie von photoaktivierbaren Biomolekülen T1 - Synthesis and photochemistry of photoactivate biomolecules N2 - Mechanistische und kinetische Untersuchungen von komplexen zellulären Prozessen in situ sind in den vergangenen Jahren durch den Einsatz photoaktivierbarer Biomoleküle, sogenannter caged Verbindungen, möglich geworden. Bei den caged Verbindungen handelt es sich um photolabile inaktive Derivate von biologisch aktiven Molekülen, aus denen durch ultraviolettes Licht mit Hilfe einer photochemischen Reaktion die natürliche, biologisch aktive Substanz schnell freigesetzt werden kann. Im Rahmen der vorliegenden Arbeit wurden caged Verbindungen von den Neurotransmittern Octopamin und Dopamin, dem Octopamin-Antagonist Epinastin, den Proteinsyntheseinhibitoren Emetin und Anisomycin, dem Protonophor CCCP und dem Riechstoff Bourgeonal hergestellt. Zur Synthese dieser caged Verbindungen wurden sowohl bekannte als auch verschiedene im Rahmen dieser Arbeit neu entwickelte photolabile Schutzgruppen mit einem (Cumarin-4-yl)methyl- bzw. einem 2-Nitrobenzyl-Gerüst eingesetzt. Entsprechende Syntheseverfahren wurden erarbeitet. Anschließend erfolgte eine umfassende physikalisch-chemische sowie photochemische Charakterisierung der erhaltenen caged Verbindungen. Dabei wurde besonders auf gute Löslichkeit in Wasser bei physiologischer Ionenstärke, schnelle und effiziente Photoreaktivität, hohe Extinktion bei Wellenlängen von 350-430 nm und gute solvolytische Stabilität bei geringer Toxizität der freigesetzten Schutzgruppe geachtet. Ein Schwerpunkt bei der photochemischen Charakterisierung bildeten die Untersuchungen zur Quantifizierung der 2-Photonen-Anregung, uncaging action cross-sections, der Cumarinylmethyl-caged Verbindungen, aufgrund ihrer Bedeutung für die Photofreisetzung von Biomolekülen, da die gleichzeitige Absorption von 2 IR-Photonen eine höhere dreidimensionale Auflösung und eine wesentlich tiefere Gewebepenetration erlaubt. Mit Hilfe von Kooperationspartnern wurden zeitaufgelösten Fluoreszenz- und IR-Messungen an verschiedenen (Cumarin-4-yl)methoxycarbonyl-caged Modellverbindungen durchgeführt, mit denen die Geschwindigkeitskonstanten k1 und kdecarb des Photolysemechanismus ermittelt wurde. Am Ende folgten die Anwendungserprobungen ausgewählter caged Verbindungen in einem Translationsassay bzw. in Zelluntersuchungen. N2 - In the last years mechanistic and kinetic in situ studies of complex cellular processes become possible by employing photoactivate Biomolecules, also called caged compounds, as a tool for these studies. Caged compounds are photolabile inactive derivates of biologic active molecules which are fast laid off the nature biologic active molecule by a photochemical reaction which was triggered by UV-light. In the present dissertation caged compounds of the neurotransmitters octopamine and dopamine, of the octopamine antagonist epinastine, of the proteine synthesis inhibitors emetine and anisomycine, of the ionophore CCCP and of the odorus substance Bourgeonal are synthesized. As precursors for the synthesis of that caged compounds some reported and several in these work newly developed photolabile protecting groups with (coumarin-4-yl)methyl- or 2-nitrobenzyl-scaffold were used. Corresponding Synthesis were designed. Afterwards the received caged compounds were global physical-chemical and photochemical characterised. In favour it was specifically valued for highly water solubility at pH 7,2, fast and efficient photo reactivity, high extinctions at wavelength 350-430 nm, well solvolytic stability and less toxicity of the redundant protecting groups. One key aspect of photochemical characterisation were the studies of uncaging action cross-sections of the coumarinylmethyl-caged molecules, because of their relevance for the photorelease of biomolecules in tissues. The simultaneous absorption of 2 IR-photons allowed highly three-dimensional release and a essentially deeper penetration in tissues. With the aid of co-operation partners were time-released fluorescence- and IR- measurements with several (coumarin-4-yl)methoxycarbonyl-caged molecules realised and therefore the rate constant k1 und kdecarb of the photolyse mechanismus were determined. At the end of the dissertation the achieved caged compounds were testet in translation assays and several cell cultures. KW - organische Chemie KW - caged Verbindungen KW - Cumarin KW - Nitrobenzyl KW - Neurotransmitter KW - organic chemistry KW - caged compounds KW - coumarine KW - nitrobenzyl KW - neurotransmitter Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-57929 ER - TY - JOUR A1 - Riebe, Daniel A1 - Zühlke, Martin A1 - Zenichowski, Karl A1 - Beitz, Toralf A1 - Dosche, Carsten A1 - Löhmannsröben, Hans-Gerd T1 - Characterization of rhodamine 6G release in electrospray ionization by means of spatially resolved fluorescence spectroscopy JF - Zeitschrift für physikalische Chemie : international journal of research in physical chemistry and chemical physics N2 - In the present work, the density distribution of rhodamine 6G ions (R6G) in the gas phase and the droplets of an electrospray plume was studied by spatial and spectral imaging. The intention is to contribute to the fundamental understanding of the release mechanism of gaseous R6G in the electrospray ionization (ESI) process. Furthermore, the influence of ESI-parameters on the release efficiency of R6G, e. g. solvent flow, R6G and salt concentration were examined via direct fluorescence imaging of R6G. A solvent-shift of the fluorescence maximum,lambda(max) = 555 nm in methanolic solution and lambda(max) = 505 nm in gas phase, allows the discrimination between solvated and gaseous R6G. Two experimental setups were used for our measurements. In the first experiment, the R6G fluorescence and the light scattered from the spray plume were imaged in two spatial dimensions using a tunable wavelength filter. The second experiment was designed for obtaining 1-dimensional spatially resolved emission spectra of the spray. Here, the intensity distribution of solvated and gaseous R6G as well as scattered light (lambda = 355 nm) were measured simultaneously. The results show the distribution of gaseous R6G in the plane, orthogonal to the ESI capillary, decreasing slightly towards the spray center and showing maxima at the cone margins. The distribution of gaseous R6G confirms the preferred release of gaseous ions from nano-droplets, indicating the ion evaporation model (IEM) to be the dominating release mechanism. Up to now, only a few fluorescence spectra of ionic compounds in the gas phase were published because the measurement of emission spectra of mass-selected ions in an ion trap is experimentally challenging. The fluorescence spectrum of gaseous lucigenin at atmospheric pressure is reported for the first time. This spectrum of lucigenin in the gas phase exhibits a blue shift of about Delta lambda = 10 nm in comparison to the corresponding spectrum in methanol. KW - Fluorescence KW - Electrospray Ionization KW - Rhodamine 6G KW - Gaseous Ions KW - Lucigenin Y1 - 2011 U6 - https://doi.org/10.1524/zpch.2011.0149 SN - 0942-9352 VL - 225 IS - 9-10 SP - 1055 EP - 1072 PB - De Gruyter Oldenbourg CY - München ER - TY - JOUR A1 - Reznichenko, Alexander L. A1 - Emge, Thomas J. A1 - Audoersch, Stephan A1 - Klauber, Eric G. A1 - Hultzsch, Kai C. A1 - Schmidt, Bernd T1 - Group 5 metal binaphtholate complexes for catalytic asymmetric hydroaminoalkylation and hydroamination/cyclization JF - Organometallics N2 - 3,3'-Silylated binaphtholate tantalum and niobium complexes were shown to be efficient catalysts for the asymmetric hydroaminoalkylation of N-methylaniline derivatives and N-benzylmethylamine with simple alkenes in enantioselectivities of up to 80% ee. No hydroaminoalkylation was observed with aminoalkenes; rather, exclusive asymmetric hydroamination/cyclization took place in up to 81% ee. Y1 - 2011 U6 - https://doi.org/10.1021/om1011006 SN - 0276-7333 VL - 30 IS - 5 SP - 921 EP - 924 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Radziuk, Darya A1 - Skirtach, Andre A1 - Gessner, Andre A1 - Kumke, Michael Uwe A1 - Zhang, Wei A1 - Möhwald, Helmuth A1 - Shchukin, Dmitry T1 - Ultrasonic Approach for Formation of Erbium Oxide Nanoparticles with Variable Geometries JF - Langmuir N2 - Ultrasound (20 kHz, 29 W. cm(-2)) is employed to form three types of erbium oxide nanoparticles in the presence of multiwalled carbon nanotubes as a template material in water. The nanoparticles are (i) erbium carboxioxide nanoparticles deposited on the external walls of multiwalled carbon nanotubes and Er(2)O(3) in the bulk with (ii) hexagonal and (iii) spherical geometries. Each type of ultrasonically formed nanoparticle reveals Er(3+) photoluminescence from crystal lattice. The main advantage of the erbium carboxioxide nanoparticles on the carbon nanotubes is the electromagnetic emission in the visible region, which is new and not examined up to the present date. On the other hand, the photoluminescence of hexagonal erbium oxide nanoparticles is long-lived (mu s) and enables the higher energy transition ((4)S(3/2)-(4)I(15/2)), which is not observed for spherical nanoparticles. Our work is unique because it combines for the first time spectroscopy of Er(3+) electronic transitions in the host crystal lattices of nanoparticles with the geometry established by ultrasound in aqueous solution of carbon nanotubes employed as a template material. The work can be of great interest for "green" chemistry synthesis of photoluminescent nanoparticles in water. Y1 - 2011 U6 - https://doi.org/10.1021/la203622u SN - 0743-7463 VL - 27 IS - 23 SP - 14472 EP - 14480 PB - American Chemical Society CY - Washington ER - TY - CHAP A1 - Prokop, A. A1 - Zadolinnaya, S. A1 - Abduvaliev, A. A1 - Frias, C. A1 - Hagenow, K. A1 - Voigt, A. A1 - Tatarskiy, V. T1 - Novel copper complexes with potent/synergistic antitumor activity in vivo and promising clinical activity T2 - Journal of clinical oncology Y1 - 2011 SN - 0732-183X SN - 1527-7755 VL - 29 IS - 15 PB - American Society of Clinical Oncology CY - Alexandria ER - TY - JOUR A1 - Prieto, Susana A1 - Shkilnyy, Andriy A1 - Rumplasch, Claudia A1 - Ribeiro, Artur A1 - Javier Arias, F. A1 - Carlos Rodriguez-Cabello, Jose A1 - Taubert, Andreas T1 - Biomimetic calcium phosphate mineralization with multifunctional elastin-like recombinamers JF - Biomacromolecules : an interdisciplinary journal focused at the interface of polymer science and the biological sciences N2 - Biomimetic hybrid materials based on a polymeric and an inorganic component such as calcium phosphate are potentially useful for bone repair. The current study reports on a new approach toward biomimetic hybrid materials using a set of recombinamers (recombinant protein materials obtained from a synthetic gene) as crystallization additive for calcium phosphate. The recombinamers contain elements from elastin, an elastic structural protein, and statherin, a salivary protein. Via genetic engineering, the basic elastin sequence was modified with the SN(A)15 domain of statherin, whose interaction with calcium phosphate is well-established. These new materials retain the biocompatibility, "smart" nature, and desired mechanical behavior of the elastin-like recombinamer (ELR) family. Mineralization in simulated body fluid (SBF) in the presence of these recombinamers reveals surprising differences. Two of the polymers inhibit calcium phosphate deposition (although they contain the statherin segment). In contrast, the third polymer, which has a triblock structure, efficiently controls the calcium phosphate formation, yielding spherical hydroxyapatite (HAP) nanoparticles with diameters from 1 to 3 nm after 1 week in SBF at 37 degrees C. However, at lower temperatures, no precipitation is observed with any of the polymers. The data thus suggest that the molecular design of ELRs containing statherin segments and the selection of an appropriate polymer structure are key parameters to obtain functional materials for the development of intelligent systems for hard tissue engineering and subsequent in vivo applications. Y1 - 2011 U6 - https://doi.org/10.1021/bm200287c SN - 1525-7797 VL - 12 IS - 5 SP - 1480 EP - 1486 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Prevost, Sylvain A1 - Wattebled, Laurent A1 - Laschewsky, André A1 - Gradzielski, Michael T1 - Formation of monodisperse charged vesicles in mixtures of cationic gemini surfactants and anionic SDS JF - Langmuir N2 - The aggregation behavior of catanionics formed by the mixture of cationic geminis derived from dodecyltrimethylammonium chloride (DTAC) and anionic sodium dodecylsulfate (SDS) was studied by means of phase studies and comprehensive small-angle neutron scattering (SANS) experiments at 25 degrees C and 50 mM overall concentration. The results are compared to those for the previously studied SDS + DTAC system. Various gemini spacers of different natures and geometries were used, but all of them had similar lengths: an ethoxy bridge, a double bond, and an aromatic ring binding the two DTACs in three different substitutions (ortho, meta, and para). SANS and SAXS data analysis indicates that the spacer has no large effect on the spheroidal micelles of pure surfactants formed at low concentration in water; however, specific effects appear with the addition of electrolytes. Microstructures formed in the catanionic mixtures are rather strongly dependent on the nature of the spacer. The most important finding is that for the hydrophilic, flexible ethoxy bridge, monodisperse vesicles with a fixed anionic/cationic charge ratio (depending only on the surfactant in excess) are formed. Furthermore, the composition of these vesicles shows that strongly charged aggregates are formed. This study therefore provides new opportunities for developing tailor-made gemini surfactants that allow for the fine tuning of catanionic structures. Y1 - 2011 U6 - https://doi.org/10.1021/la103976p SN - 0743-7463 VL - 27 IS - 2 SP - 582 EP - 591 PB - American Chemical Society CY - Washington ER - TY - THES A1 - Popovic, Jelena T1 - Novel lithium iron phosphate materials for lithium-ion batteries T1 - Neuartige Lithium-Eisen-Phosphat-Materialien für Lithium-Ionen-Batterien N2 - Conventional energy sources are diminishing and non-renewable, take million years to form and cause environmental degradation. In the 21st century, we have to aim at achieving sustainable, environmentally friendly and cheap energy supply by employing renewable energy technologies associated with portable energy storage devices. Lithium-ion batteries can repeatedly generate clean energy from stored materials and convert reversely electric into chemical energy. The performance of lithium-ion batteries depends intimately on the properties of their materials. Presently used battery electrodes are expensive to be produced; they offer limited energy storage possibility and are unsafe to be used in larger dimensions restraining the diversity of application, especially in hybrid electric vehicles (HEVs) and electric vehicles (EVs). This thesis presents a major progress in the development of LiFePO4 as a cathode material for lithium-ion batteries. Using simple procedure, a completely novel morphology has been synthesized (mesocrystals of LiFePO4) and excellent electrochemical behavior was recorded (nanostructured LiFePO4). The newly developed reactions for synthesis of LiFePO4 are single-step processes and are taking place in an autoclave at significantly lower temperature (200 deg. C) compared to the conventional solid-state method (multi-step and up to 800 deg. C). The use of inexpensive environmentally benign precursors offers a green manufacturing approach for a large scale production. These newly developed experimental procedures can also be extended to other phospho-olivine materials, such as LiCoPO4 and LiMnPO4. The material with the best electrochemical behavior (nanostructured LiFePO4 with carbon coating) was able to delive a stable 94% of the theoretically known capacity. N2 - Konventionelle Energiequellen sind weder nachwachsend und daher nachhaltig nutzbar, noch weiterhin langfristig verfügbar. Sie benötigen Millionen von Jahren um gebildet zu werden und verursachen in ihrer Nutzung negative Umwelteinflüsse wie starke Treibhausgasemissionen. Im 21sten Jahrhundert ist es unser Ziel nachhaltige und umweltfreundliche, sowie möglichst preisgünstige Energiequellen zu erschließen und nutzen. Neuartige Technologien assoziiert mit transportablen Energiespeichersystemen spielen dabei in unserer mobilen Welt eine große Rolle. Li-Ionen Batterien sind in der Lage wiederholt Energie aus entsprechenden Prozessen nutzbar zu machen, indem sie reversibel chemische in elektrische Energie umwandeln. Die Leistung von Li-Ionen Batterien hängen sehr stark von den verwendeten Funktionsmaterialien ab. Aktuell verwendete Elektrodenmaterialien haben hohe Produktionskosten, verfügen über limitierte Energiespeichekapazitäten und sind teilweise gefährlich in der Nutzung für größere Bauteile. Dies beschränkt die Anwendungsmöglichkeiten der Technologie insbesondere im Gebiet der hybriden Fahrzeugantriebe. Die vorliegende Dissertation beschreibt bedeutende Fortschritte in der Entwicklung von LiFePO4 als Kathodenmaterial für Li-Ionen Batterien. Mithilfe einfacher Syntheseprozeduren konnten eine vollkommen neue Morphologie (mesokristallines LiFePo4) sowie ein nanostrukturiertes Material mit exzellenten elektrochemischen Eigenschaften hergestellt werden. Die neu entwickelten Verfahren zur Synthese von LiFePo4 sind einschrittig und bei signifikant niedrigeren Temperaturen im Vergleich zu konventionellen Methoden. Die Verwendung von preisgünstigen und umweltfreundlichen Ausgangsstoffen stellt einen grünen Herstellungsweg für die large scale Synthese dar. Mittels des neuen Synthesekonzepts konnte meso- und nanostrukturiertes LiFe PO4 generiert werden. Die Methode ist allerdings auch auf andere phospho-olivin Materialien (LiCoPO4, LiMnPO4) anwendbar. Batterietests der besten Materialien (nanostrukturiertes LiFePO4 mit Kohlenstoffnanobeschichtung) ergeben eine mögliche Energiespeicherung von 94%. KW - Li-Ionen-Akkus KW - Kathode KW - LiFePO4 KW - Mesokristalle KW - Nanopartikel KW - Li-ion batteries KW - cathode KW - LiFePO4 KW - mesocrystals KW - nanoparticles Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-54591 ER - TY - JOUR A1 - Poghosyan, Armen H. A1 - Arsenyan, Levon H. A1 - Gharabekyan, Hrant H. A1 - Falkenhagen, Sandra A1 - Koetz, Joachim A1 - Shahinyan, Aram A. T1 - Molecular dynamics simulations of inverse sodium dodecyl sulfate (SDS) micelles in a mixed toluene/pentanol solvent in the absence and presence of poly(diallyldimethylammonium chloride) (PDADMAC) JF - Journal of colloid and interface science N2 - We have performed a 15 ns molecular dynamics simulation of inverse sodium dodecyl sulfate (SDS) micelles in a mixed toluene/pentanol solvent in the absence and presence of a cationic polyelectrolyte, i.e. poly(diallyldimethylammonium chloride) (PDADMAC). The NAMD code and CHARMM force field were used. During the simulation time, the radii of SOS inverse micelles changed and the radii of the water droplets have been calculated. The behavior of SDS hydrocarbon chains has been characterized by calculating the orientation order parameter and the chain average length. The water droplet properties (water flow, water molecules displacement) have been examined. In summary the MD simulations indicate a more rigid and ordered surfactant film due to the formation of a polyelectrolyte palisade layer in full agreement with the experimental findings, e.g. the viscosity increase and shift of the percolation boundary. KW - Surfactant micelles KW - Molecular dynamics simulations KW - SDS Y1 - 2011 U6 - https://doi.org/10.1016/j.jcis.2011.01.091 SN - 0021-9797 VL - 358 IS - 1 SP - 175 EP - 181 PB - Elsevier CY - San Diego ER - TY - JOUR A1 - Pimpalpalle, Tukaram M. A1 - Vidadala, Srinivasa Rao A1 - Hotha, Srinivas A1 - Linker, Torsten T1 - Lewis acid-catalyzed stereoselective lactonization and subsequent glycosidation of 2-C-malonyl carbohydrates JF - Chemical communications N2 - Gold(III) bromide is a suitable catalyst for the stereoselective cyclization of 2-C-malonyl carbohydrates to the anomeric center under retention of one ester group. Reopening of the lactones with alcohols in the presence of TMSOTf affords allyl, propargyl and benzyl glycosides with high alpha-selectivity. Y1 - 2011 U6 - https://doi.org/10.1039/c1cc13425f SN - 1359-7345 VL - 47 IS - 37 SP - 10434 EP - 10436 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Piluso, Susanna A1 - Hiebl, Bernhard A1 - Gorb, Stanislav N. A1 - Kovalev, Alexander A1 - Lendlein, Andreas A1 - Neffe, Axel T. T1 - Hyaluronic acid-based hydrogels crosslinked by copper-catalyzed azide-alkyne cycloaddition with tailorable mechanical properties JF - The international journal of artificial organs N2 - Biopolymers of the extracellular matrix are attractive starting materials for providing degradable and biocompatible biomaterials. In this study, hyaluronic acid-based hydrogels with tunable mechanical properties were prepared by the use of copper-catalyzed azide-alkyne cycloaddition (known as "click chemistry"). Alkyne-functionalized hyaluronic acid was crosslinked with linkers having two terminal azide functionalities, varying crosslinker density as well as the lengths and rigidity of the linker molecules. By variation of the crosslinker density and crosslinker type, hydrogels with elastic moduli in the range of 0.5-4 kPa were prepared. The washed materials contained a maximum of 6.8 mg copper per kg dry weight and the eluate of the gel crosslinked with diazidostilbene did not show toxic effects on L929 cells. The hyaluronic acid-based hydrogels have potential as biomaterials for cell culture or soft tissue regeneration applications. KW - Biomaterial KW - Hydrogel KW - Hyaluronic acid KW - Microindentation KW - Rheology Y1 - 2011 U6 - https://doi.org/10.5301/IJAO.2011.6394 SN - 0391-3988 VL - 34 IS - 2 SP - 192 EP - 197 PB - Wichtig CY - Milano ER - TY - JOUR A1 - Pihlaja, Kalevi A1 - Sinkkonen, Jari A1 - Stajer, Geza A1 - Koch, Andreas A1 - Kleinpeter, Erich T1 - 1-Oxo-1,3-dithiolanes - synthesis and stereochemistry JF - Magnetic resonance in chemistry N2 - 1-Oxo-1,3-dithiolane (4) and its cis- and trans-2-methyl (5,6), -4-methyl (7,8) and -5-methyl (9,10) derivatives were prepared by oxidizing the corresponding 1,3-dithiolanes (1-3) with NaIO(4) in water. The oxides were purified and their isomers separated using thin layer chromatography. The structural characterization was carried out with (1)H and (13)C NMR spectroscopy and molecular modelling. The sulfoxides 4-6 and 8-10 attain two S(1) type envelopes (sometimes slightly distorted) the S=O(ax) envelope greatly dominating. Cis-4-methyl-1-oxo-1,3-dithiolane is a special case exhibiting both two closely related S=O(ax) (30 and 27%) as well as S=O(eq) (21 and 22%) forms [S(1) and C(4) envelopes, respectively]. The relative energies of these conformations, the values of (1)H-(1)H coupling constants and (1)H and (13)C chemical shifts were estimated by computational methods and they support well the conclusions based on the experimental data. KW - NMR KW - (1)H NMR KW - (13)C NMR KW - sulfur heterocycles KW - conformational analysis KW - computational chemistry Y1 - 2011 U6 - https://doi.org/10.1002/mrc.2764 SN - 0749-1581 VL - 49 IS - 7 SP - 443 EP - 449 PB - Wiley-Blackwell CY - Malden ER - TY - THES A1 - Pfeifer, Sebastian T1 - Neue Ansätze zur Monomersequenzkontrolle in synthetischen Polymeren T1 - New approaches for monomer sequence control in synthetic polymers N2 - Von der Natur geschaffene Polymere faszinieren Polymerforscher durch ihre spezielle auf eine bestimmte Aufgabe ausgerichtete Funktionalität. Diese ergibt sich aus ihrer Bausteinabfolge uber die Ausbildung von Uberstrukturen. Dazu zählen zum Beispiel Proteine (Eiweiße), aus deren Gestalt sich wichtige Eigenschaften ergeben. Diese Struktureigenschaftsbeziehung gilt ebenso für funktionelle synthetische Makromoleküle. Demzufolge kann die Kontrolle der Monomersequenz in Polymeren bedeutend für die resultierende Form des Polymermoleküls sein. Obwohl die Synthese von synthetischen Polymeren mit der Komplexität und der Größe von Proteinen in absehbarer Zeit wahrscheinlich nicht gelingen wird, können wir von der Natur lernen, um neuartige Polymermaterialien mit definierten Strukturen (Sequenzen) zu synthetisieren. Deshalb ist die Entwicklung neuer und besserer Techniken zur Strukturkontrolle von großem Interesse für die Synthese von Makromolekülen, die perfekt auf ihre Funktion zugeschnitten sind. Im Gegensatz zu der Anzahl fortgeschrittener Synthesestrategien zum Design aus- gefallener Polymerarchitekturen – wie zum Beispiel Sterne oder baumartige Polymere (Dendrimere) – gibt es vergleichsweise wenig Ansätze zur echten Sequenzkontrolle in synthetischen Polymeren. Diese Arbeit stellt zwei unterschiedliche Techniken vor, mit denen die Monomersequenz innerhalb eines Polymers kontrolliert werden kann. Gerade bei den großtechnisch bedeutsamen radikalischen Polymerisationen ist die Sequenzkontrolle schwierig, weil die chemischen Bausteine (Monomere) sehr reaktiv sind. Im ersten Teil dieser Arbeit werden die Eigenschaften zweier Monomere (Styrol und N-substituiertes Maleinimid) geschickt ausgenutzt, um in eine Styrolkette definierte und lokal scharf abgegrenzte Funktionssequenzen einzubauen. Uber eine kontrollierte radikalische Polymerisationsmethode (ATRP) wurden in einer Ein-Topf-Synthese über das N-substituierte Maleinimid chemische Funktionen an einer beliebigen Stelle der Polystyrolkette eingebaut. Es gelang ebenfalls, vier unterschiedliche Funktionen in einer vorgegebenen Sequenz in die Polymerkette einzubauen. Diese Technik wurde an zwanzig verschiedenen N-substituierten Maleinimiden getestet, die meisten konnten erfolgreich in die Polymerkette integriert werden. In dem zweiten in dieser Arbeit vorgestellten Ansatz zur Sequenzkontrolle, wurde der schrittweise Aufbau eines Oligomers aus hydrophoben und hydrophilen Segmenten (ω-Alkin-Carbonsäure bzw. α-Amin-ω-Azid-Oligoethylenglycol) an einem löslichen Polymerträger durchgeführt. Das Oligomer konnte durch die geschickte Auswahl der Verknüpfungsreaktionen ohne Schutzgruppenstrategie synthetisiert werden. Der lösliche Polymerträger aus Polystyrol wurde mittels ATRP selbst synthetisiert. Dazu wurde ein Startreagenz (Initiator) entwickelt, das in der Mitte einen säurelabilen Linker, auf der einen Seite die initiierende Einheit und auf der anderen die Ankergruppe für die Anbindung des ersten Segments trägt. Der lösliche Polymerträger ermöglichte einerseits die schrittweise Synthese in Lösung. Andererseits konnten überschüssige Reagenzien und Nebenprodukte zwischen den Reaktionsschritten durch Fällung in einem Nicht-Lösungsmittel einfach abgetrennt werden. Der Linker ermöglichte die Abtrennung des Oligomers aus jeweils drei hydrophoben und hydrophilen Einheiten nach der Synthese. N2 - Polymer scientists are impressed by polymers created by nature. This is caused by their structure which is aimed to fulfill very special functions. The structure is primary built by sequential covalent linking of building units. Secondly, supramolecular aggregation leads to three-dimensional alignment. The sequence of the building blocks has a high influence on the higher molecular arrangement. Proteins are only one example for supramolecular structures which have special functions because of their supramolecular arrangement. This structure-property relationship is also possible for synthetic polymers. For this reason the control of monomer sequences in synthtic polymers is just as important for the resulting structure of a synthetic polymer molecule. Even though the synthesis of polymers with complex strucures and sizes as in nature is impossible in near future. But the development of new and better techniques for sequence control in synthetic polymers is of high importance to create well defined macromolecular structures which are tailor-made for their function. In contrast to a lot of advanced synthethis strategies for the design of complex polymer architechtures (e.g. brushes, stars, or dendrimers) their are less approaches for a monomer sequence control in synthetic polymers. This work presents two different techniques for controlling the monomer sequence inside a polymer. Especially in technologically significant radical polymerization it is difficult to control the monomer sequence because radical species are very reactive and the addition of a monomer to the radical function is not selective. The first approach makes use of the properties of two monomers (styrene and N-substituted maleimides) to add chemical funtions locally inside a polystyrene chain. By addition of N-functionalized maleimides during the polymerization of styrene chemical functions could be added at any desired position inside the polystyrene chain. This technique was tested on 20 different N-substituted maleimides. Most of them were incorporated successfully into the polymer chain. The second monomer sequence control approach is a stepwise synthesis of an oligomer made of short alternating hydrophobic and hydrophilic segments on a soluble polymer support. Two building blocks were used: ω-alkyne carboxylic acid (A-B) and α-amine-ω-azide oligoethylene glycol (C-D). The linking of the segments was done by applying two very efficient chemical reactions, namely 1,3-dipolar cycloaddition of terminal alkynes (A) and azides (D) and amidification of carboxylic acids (B) with primary amines (C). These two reactions proceed chemoselectively in an ABCD multifunctional mixture without a protection chemistry strategy. The polystyrene support was synthesized by atom transfer radical polymerization (ATRP) in the presence of an azido-functionalized ATRP initiator containing a labile p-alkoxybenzyl ester linker. Depending on the choise of solvent, the soluble polymer support was used in solution during the coupling reactions or was precipitated for an easy removal of excessive reagents and by-products. The acid-labile linker could be cleaved by trifluoroacetic acid treatment to obtain a hydrophilic/hydrophobic block copolymer. KW - ATRP KW - Copolymerisation KW - Flüssigphasensynthese KW - WANG-Linker KW - Klick-Chemie KW - ATRP KW - copolymerization KW - liquid phase synthesis KW - WANG-linker KW - click chemistry Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-51385 ER - TY - JOUR A1 - Nikolaus, Jörg A1 - Czapla, Sylvia A1 - Möllnitz, Kristian A1 - Höfer, Chris T. A1 - Herrmann, Andreas A1 - Wessig, Pablo A1 - Müller, Peter T1 - New molecular rods - Characterization of their interaction with membranes JF - Biochimica et biophysica acta : Biomembranes N2 - Molecular rods are synthetical molecules consisting of a hydrophobic backbone which are functionalized with varying terminal groups. Here, we report on the interaction of a recently described new class of molecular rods with lipid and biological membranes. In order to characterize this interaction, different fluorescently labeled rods were synthesized allowing for the application of fluorescence spectroscopy and microscopy based approaches. Our data show that the rods are incorporated into membranes with a perpendicular orientation to the membrane surface and enrich preferentially in liquid-disordered lipid domains. These characteristics underline that rods can be applied as stable membrane-associated anchors for functionalizing membrane surfaces. KW - Molecular rod KW - Phospholipid KW - Lipid domain KW - Spiro compound Y1 - 2011 U6 - https://doi.org/10.1016/j.bbamem.2011.08.008 SN - 0005-2736 VL - 1808 IS - 12 SP - 2781 EP - 2788 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Neuvonen, Kari A1 - Neuvonen, Helmi A1 - Koch, Andreas A1 - Kleinpeter, Erich T1 - NBO analysis of polar and steric effect using the axial-equatorial equilibrium of cyclohexyl acetates as a probe JF - Computational and theoretical chemistry N2 - The proportion of the axial conformer increases in the ax reversible arrow eq equilibrium of cyclohexyl acetates (RCOOC(6)H(11), R reversible arrow Me, Et, iPr, tBu, CH(2)Cl, CHCl(2), CO(3). CH(2)Br, CHBr(2), CBr(3)) with the increasing size of the acyloxy substitution. The nature of this unexpected steric substituent effect, which is opposite to general stereochemical concepts, was studied by means of ab kiln MO method, accompanied by NBO and isodesmic calculations. NBO parameters seem to be good descriptors for quantitative prediction of the experimental Delta G degrees value of the title conformational equilibrium. The origin and propagation of the substituent effect of the polar substitutions (CH(2)Cl, CHCl(2), CCl(3), CH(2)Br, CHBr(2), CBr(3)) differ, however, from those of the pure alkyl (Me, Et, iPr, tBu) substitutions. The Delta G degrees value of the polar derivatives depends on the qC8 charges, on the occupation of the sigma(center dot)(C1-07) orbital and on the hyperconjugative pi(center dot)(c=O) -> sigma(center dot)(C10-X) and sigma(center dot)(C10-X) -> pi(center dot)(c=O) interactions. The substituent sensitivity of these NBC parameters for the two conformers differ to the effect that the ax reversible arrow eq equilibrium is shifted to the left side with increasing electron withdrawing character of the acyloxy group. The Delta G degrees values of the alkyl derivatives are interpreted in terms of the calculated dipole moments. The destabilization in the non-polar medium (the experimental Delta G degrees values used were measured in CD(2)Cl(2)) due to the enhanced dipolar character is more prominent in the case of the equatorial alkyl conformers. As the consequence, the ax reversible arrow eq equilibrium is shifted to the left despite the increasing size of the R group when going from Me to tBu substitution. KW - Substituent effects KW - Ab initio MO computations KW - Conformational equilibria KW - Cyclohexyl esters KW - NBO analysis Y1 - 2011 U6 - https://doi.org/10.1016/j.comptc.2010.12.033 SN - 2210-271X VL - 964 IS - 1-3 SP - 234 EP - 242 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Neumann, Mike A1 - Noeske, Robert A1 - Bach, Grete A1 - Glaubauf, Thomas A1 - Bartoszek, Michael A1 - Strauch, Peter T1 - A procedure for rapid determination of the silicon content in plant materials JF - Zeitschrift für Naturforschung : B, Chemical sciences N2 - An efficient, reliable and low-cost procedure to determine the silicon content in plant material is presented which allows to monitor the agricultural aspects like growth and yield. The presented procedure consists of a hydrochloric acid pre-treatment and a subsequent thermal oxidation. The method is compared to other processes like dissolution in hydrofluoric acid combined with ICP OES, energy-dispersive X-ray fluorescence spectroscopy (EDXRF) or aqua regia treatment. KW - Silica Determination KW - Silicon Content KW - Plant Material Y1 - 2011 SN - 0932-0776 VL - 66 IS - 3 SP - 289 EP - 294 PB - De Gruyter CY - Tübingen ER - TY - CHAP A1 - Neffe, Axel T. A1 - Zaupa, Alessandro A1 - Lendlein, Andreas T1 - Physical crosslinking of gelatin a supramolecular approach tobiomaterial T2 - The international journal of artificial organs Y1 - 2011 SN - 0391-3988 VL - 34 IS - 8 SP - 656 EP - 656 PB - Wichtig CY - Milano ER - TY - JOUR A1 - Möller, Eleonore A1 - Beuermann, Sabine T1 - Homogeneous phase copolymerizations of vinylidene fluoride and hexafluoropropene in supercritical carbon dioxide JF - Macromolecular reaction engineering N2 - Copolymerizations of vinylidene fluoride (VDF) and hexafluoropropene (HFP) were carried out in homogeneous phase with supercritical carbon dioxide up to complete VDF conversion using conventional peroxide initiators. The HFP monomer feed ratios, f(HFP), were varied between 0.65 and 0.20. Depending on f(HFP) amorphous or semi-crystalline copolymers were obtained. f(HFP) also determines the minimum pressure required to allow for homogeneous phase reactions. For example, HFP-rich copolymerizations in 70 wt.-% CO(2) at 100 degrees C require a pressure of around 500 bar. Further, bulk copolymerizations in homogenous phase were feasible for f(HFP) 0.65 at 900 bar up to complete VDF conversion. Copolymerizations in the presence of perfluorinated hexyl iodide carried out at 75 degrees C gave access to low dispersity polymers. Due to homogeneous phase conditions the use of any surfactants or fluorinated cosolvent is avoided. KW - copolymerization KW - hexafluoropropene KW - phase behavior KW - supercritical CO(2) KW - vinylidene fluoride Y1 - 2011 U6 - https://doi.org/10.1002/mren.201000031 SN - 1862-832X VL - 5 IS - 1 SP - 8 EP - 21 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Mutlu, Hatice A1 - de Espinosa, Lucas Montero A1 - Meier, Michael A. R. T1 - Acyclic diene metathesis a versatile tool for the construction of defined polymer architectures JF - Chemical Society reviews N2 - Two decades have passed since the metathesis polymerisation of alpha,omega-dienes was successfully demonstrated by the group of Wagener and the term acyclic diene metathesis (ADMET) polymerisation was coined. Since then, the advances of metathesis chemistry have allowed to expand the scope of this versatile polymerisation reaction that nowadays finds applications in different fields, such as polymer, material, or medicinal chemistry. This critical review provides an insight into the historical aspects of ADMET and a detailed overview of the work done to date applying this versatile polymerisation reaction (221 references). Y1 - 2011 U6 - https://doi.org/10.1039/b924852h SN - 0306-0012 VL - 40 IS - 3 SP - 1404 EP - 1445 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Moskalik, Mikail Yu. A1 - Shainyan, Bagrat A. A1 - Schilde, Uwe T1 - Reaction of trifluoromethanesulfonamide with alkenes and cycloocta-1,5-diene under oxidative conditions direct assembly of 9-heterobicyclo[4.2.1]nonanes JF - Russian journal of organic chemistry N2 - Reactions of trifluoromethanesulfonamide with alpha-methylstyrene, 2-methylpent-1-ene, and cycloocta-1,5-diene in the system t-BuOCl-NaI were studied. In the reaction with alpha-methylstyrene 1-iodo-2-phenylpropan-2-ol was the only isolated product. The reaction with 2-methylpent-1-ene gave a mixture of N,N'-(2-methylpentane-1,2-diyl)bis(trifluoromethanesulfonamide), trifluoro-N-(2-hydroxy-2-methylpentyl)-methanesulfonamide, and N,N'-[oxybis(2-methylpentan-2,1-diyl)]bis(trifluoromethanesulfonamide). Trifluoromethanesulfonamide reacted with cycloocta-1,5-diene to produce a mixture of 2,5-diiodo-9-(trifluoromethylsulfonyl)-9-azabicyclo[4.2.1]nonane and 2,5-diiodo-9-oxabicyclo[4.2.1]nonane; this reaction may be regarded as the first example of direct assembly of bicyclononane skeleton. Y1 - 2011 U6 - https://doi.org/10.1134/S1070428011090016 SN - 1070-4280 VL - 47 IS - 9 SP - 1271 EP - 1277 PB - Pleiades Publ. CY - New York ER - TY - JOUR A1 - Mengibar, M. A1 - Ganan, M. A1 - Miralles, B. A1 - Carrascosa, A. V. A1 - Martinez-Rodriguez, Adolfo J. A1 - Peter, Martin G. A1 - Heras, A. T1 - Antibacterial activity of products of depolymerization of chitosans with lysozyme and chitosanase against Campylobacter jejuni JF - Carbohydrate polymers : an international journal devoted to scientific and technological aspects of industrially important polysaccharides N2 - Chitosan has several biological properties useful for the food industry, but the most attractive is its potential use as a food preservative of natural origin due to its antimicrobial activity against a wide range of food-borne microorganisms. Among food-borne pathogens, Campylobacter jejuni and related species are recognised as the most common causes of bacterial food-borne diarrhoeal disease throughout the world. Recently, it has been demonstrated that campylobacters are highly sensitive to chitosan. Even though chitosan is known to have important functional activities, poor solubility makes them difficult to use in food and biomedical applications. Unlike chitosan, the low viscosity and good solubility of chitosan oligosaccharides (COS) make them especially attractive in an important number of useful applications. In the present work, the effect of different COS on C. jejuni was investigated. Variables such as the physicochemical characteristics of chitosan and the enzyme used in COS preparation were studied. The COS had been fractioned using ultrafiltration membranes and each fraction was characterized regarding its FA and molecular weight distribution. It has been demonstrated that the biological properties of COS on Campylobacter depend on the composition of the fraction analysed. COS prepared by enzymatic hydrolysis with chitosanase were more active against Campylobacter that lysozyme-derived COS, and this behaviour seems to be related with the acetylation of the chains. On the other hand. the 10-30 kDa fraction was the most active COS fraction, independently of the enzyme used for the hydrolysis. These results have shown that COS could be useful as antimicrobial in the control of C. jejuni. KW - Campylobacter jejuni KW - Chitooligosaccharides KW - Chitosanase KW - Lysozyme KW - Depolymerization Y1 - 2011 U6 - https://doi.org/10.1016/j.carbpol.2010.04.042 SN - 0144-8617 VL - 84 IS - 2 SP - 844 EP - 848 PB - Elsevier CY - Oxford ER - TY - JOUR A1 - Marsat, Jean-Noel A1 - Heydenreich, Matthias A1 - Kleinpeter, Erich A1 - Berlepsch, Hans V. A1 - Boettcher, Christoph A1 - Laschewsky, André T1 - Self-Assembly into multicompartment micelles and selective solubilization by Hydrophilic-Lipophilic-Fluorophilic block copolymers JF - Macromolecules : a publication of the American Chemical Society N2 - Amphiphilic linear ternary block copolymers (ABC) were synthesized in three consecutive steps by the reversible addition fragmentation chain transfer (RAFT) method. Using oligo(ethylene oxide) monomethyl ether acrylate, benzyl acrylate, and 1H,1H-perfluorobutyl acrylate monomers, the triblock copolymers consist of a hydrophilic (A), a lipophilic (B), and a fluorophilic (C) block. The block sequence of the triphilic copolymers was varied systematically to provide all possible variations: ABC, ACB, and BAC. All blocks have glass transition temperatures below 0 degrees C. Self-assembly into spherical micellar aggregates was observed in aqueous solution, where hydrophobic cores undergo local phase separation into various ultrastructures as shown by cryogenic transmission electron microscopy (cryo-TEM). Selective solubilization of substantial quantities of hydrocarbon and fluorocarbon low molar mass compounds by the lipophilic and fluorophilic block, respectively, is demonstrated. Y1 - 2011 U6 - https://doi.org/10.1021/ma200032j SN - 0024-9297 VL - 44 IS - 7 SP - 2092 EP - 2105 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Marquardt, Dorothea A1 - Xie, Zailai A1 - Taubert, Andreas A1 - Thomann, Ralf A1 - Janiak, Christoph T1 - Microwave synthesis and inherent stabilization of metal nanoparticles in 1-methyl-3-(3-carboxyethyl)-imidazolium tetrafluoroborate JF - Dalton transactions : a journal of inorganic chemistry, including bioinorganic, organometallic, and solid-state chemistry N2 - The synthesis of Co-NPs and Mn-NPs by microwave-induced decomposition of the metal carbonyls Co-2(CO)(8) and Mn-2(CO)(10), respectively, yields smaller and better separated particles in the functionalized IL 1-methyl-3-(3-carboxyethyl)-imidazolium tetrafluoroborate [EmimCO(2)H][BF4] (1.6 +/- 0.3 nm and 4.3 +/- 1.0 nm, respectively) than in the non-functionalized IL 1-n-butyl-3-methylimidazolium tetrafluoroborate [Bmim][BF4]. The particles are stable in the absence of capping ligands (surfactants) for more than six months although some variation in particle size could be observed by TEM. Y1 - 2011 U6 - https://doi.org/10.1039/c1dt10795j SN - 1477-9226 VL - 40 IS - 33 SP - 8290 EP - 8293 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Mantion, Alexandre A1 - Graf, Philipp A1 - Florea, Ileana A1 - Haase, Andrea A1 - Thuenemann, Andreas F. A1 - Masic, Admir A1 - Ersen, Ovidiu A1 - Rabu, Pierre A1 - Meier, Wolfgang P. A1 - Luch, Andreas A1 - Taubert, Andreas T1 - Biomimetic synthesis of chiral erbium-doped silver/peptide/silica core-shell nanoparticles (ESPN) JF - Nanoscale N2 - Peptide-modified silver nanoparticles have been coated with an erbium-doped silica layer using a method inspired by silica biomineralization. Electron microscopy and small-angle X-ray scattering confirm the presence of an Ag/peptide core and silica shell. The erbium is present as small Er(2)O(3) particles in and on the silica shell. Raman, IR, UV-Vis, and circular dichroism spectroscopies show that the peptide is still present after shell formation and the nanoparticles conserve a chiral plasmon resonance. Magnetic measurements find a paramagnetic behavior. In vitro tests using a macrophage cell line model show that the resulting multicomponent nanoparticles have a low toxicity for macrophages, even on partial dissolution of the silica shell. Y1 - 2011 U6 - https://doi.org/10.1039/c1nr10930h SN - 2040-3364 VL - 3 IS - 12 SP - 5168 EP - 5179 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Löbbicke, Ruben A1 - Chanana, Munish A1 - Schlaad, Helmut A1 - Pilz-Allen, Christine A1 - Günter, Christina A1 - Möhwald, Helmuth A1 - Taubert, Andreas T1 - Polymer Brush Controlled Bioinspired Calcium Phosphate Mineralization and Bone Cell Growth JF - Biomacromolecules : an interdisciplinary journal focused at the interface of polymer science and the biological sciences N2 - Polymer brushes on thiol-modified gold surfaces were synthesized by using terminal thiol groups for the surface initiated free radical polymerization of methacrylic acid and dimethylaminotheyl methacrylate, respectively. Atomic force microscopy shows that the resulting poly(methacrylic acid (PMAA) and poly(dimethylaminothyl methacrylate) (PDM- AEMA) brushes are homogeneous. Contact angle measurements show that the brushes are pH responsive and can reversibly be protonated and deprotonated. Mineralization of the brushes with calcium phosphate at different pH yields homogeneously mineralized surfaces, and preosteoblastic cells proliferate-on be number of living cells on the mineralized hybrid surface is ca. 3 times (P corresponding nonmineralized brushes. Y1 - 2011 U6 - https://doi.org/10.1021/bm200991b SN - 1525-7797 VL - 12 IS - 10 SP - 3753 EP - 3760 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Luo, Ying A1 - Utecht, Manuel Martin A1 - Dokic, Jadranka A1 - Korchak, Sergey A1 - Vieth, Hans-Martin A1 - Haag, Rainer A1 - Saalfrank, Peter T1 - Cis-trans isomerisation of substituted aromatic imines a comparative experimental and theoretical study JF - ChemPhysChem : a European journal of chemical physics and physical chemistry N2 - The cis-trans isomerisation of N-benzylideneaniline (NBA) and derivatives containing a central C=N bond has been investigated experimentally and theoretically. Eight different NBA molecules in three different solvents were irradiated to enforce a photochemical trans (hv) -> cis isomerisation and the kinetics of the thermal backreaction cis (Delta)-> trans were determined by NMR spectroscopy measurements in the temperature range between 193 and 288 K. Theoretical calculations using density functional theory and Eyring transition-state theory were carried out for 12 different NBA species in the gas phase and three different solvents to compute thermal isomerisation rates of the thermal back reaction. While the computed absolute rates are too large, they reveal and explain experimental trends. Time-dependent density functional theory provides optical spectra for vertical transitions and excitation energy differences between trans and cis forms. Together with isomerisation rates, the latter can be used to identify "optimal switches" with good photochromicity and reasonable thermal stability. KW - density functional calculations KW - imines KW - isomerization KW - photochemistry KW - thermochemistry Y1 - 2011 U6 - https://doi.org/10.1002/cphc.201100179 SN - 1439-4235 VL - 12 IS - 12 SP - 2311 EP - 2321 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Licausi, Francesco A1 - Giorgi, Federico Manuel A1 - Schmaelzlin, Elmar A1 - Usadel, Björn A1 - Perata, Pierdomenico A1 - van Dongen, Joost Thomas A1 - Geigenberger, Peter T1 - HRE-Type Genes are regulated by Growth-Related Changes in internal Oxygen Concentrations During the normal development of Potato (Solanum tuberosum) Tubers JF - Plant & cell physiology N2 - The occurrence of hypoxic conditions in plants not only represents a stress condition but is also associated with the normal development and growth of many organs, leading to adaptive changes in metabolism and growth to prevent internal anoxia. Internal oxygen concentrations decrease inside growing potato tubers, due to their active metabolism and increased resistance to gas diffusion as tubers grow. In the present work, we identified three hypoxia-responsive ERF (StHRE) genes whose expression is regulated by the gradual decrease in oxygen tensions that occur when potato tubers grow larger. Increasing the external oxygen concentration counteracted the modification of StHRE expression during tuber growth, supporting the idea that the actual oxygen levels inside the organs, rather than development itself, are responsible for the regulation of StHRE genes. We identified several sugar metabolism-related genes co-regulated with StHRE genes during tuber development and possibly involved in starch accumulation. All together, our data suggest a possible role for low oxygen in the regulation of sugar metabolism in the potato tuber, similar to what happens in storage tissues during seed development. KW - Co-expression KW - ERF KW - Hypoxia KW - Potato KW - Solanum tuberosum KW - Tuber Y1 - 2011 U6 - https://doi.org/10.1093/pcp/pcr128 SN - 0032-0781 VL - 52 IS - 11 SP - 1957 EP - 1972 PB - Oxford Univ. Press CY - Oxford ER - TY - JOUR A1 - Lahn, Mattes A1 - Dosche, Carsten A1 - Hille, Carsten T1 - Two-photon microscopy and fluorescence lifetime imaging reveal stimulus-induced intracellular Na+ and Cl- changes in cockroach salivary acinar cells JF - American journal of physiology : Cell physiology N2 - Lahn M, Dosche C, Hille C. Two-photon microscopy and fluorescence lifetime imaging reveal stimulus-induced intracellular Na+ and Cl- changes in cockroach salivary acinar cells. Am J Physiol Cell Physiol 300: C1323-C1336, 2011. First published February 23, 2011; doi: 10.1152/ajpcell.00320.2010.-The intracellular ion homeostasis in cockroach salivary acinar cells during salivation is not satisfactorily understood. This is mainly due to technical problems regarding strong tissue autofluorescence and ineffective ion concentration quantification. For minimizing these problems, we describe the successful application of two-photon (2P) microscopy partly in combination with fluorescence lifetime imaging microscopy (FLIM) to record intracellular Na+ and Cl- concentrations ([Na+](i), [Cl-](i)) in cockroach salivary acinar cells. Quantitative 2P-FLIM Cl- measurements with the dye N-(ethoxycarbonylmethyl)-6-methoxy-quinolinium bromide indicate that the resting [Cl-](i) is 1.6 times above the Cl- electrochemical equilibrium but is not influenced by pharmacological inhibition of the Na+-K+-2Cl(-) cotransporter (NKCC) and anion exchanger using bumetanide and 4,4'-diisothiocyanatodihydrostilbene-2,2'-disulfonic acid disodium salt. In contrast, rapid Cl- reuptake after extracellular Cl- removal is almost totally NKCC mediated both in the absence and presence of dopamine. However, in physiological saline [Cl-](i) does not change during dopamine stimulation although dopamine stimulates fluid secretion in these glands. On the other hand, dopamine causes a decrease in the sodium-binding benzofuran isophthalate tetra-ammonium salt (SBFI) fluorescence and an increase in the Sodium Green fluorescence after 2P excitation. This opposite behavior of both dyes suggests a dopamine-induced [Na+](i) rise in the acinar cells, which is supported by the determined 2P-action cross sections of SBFI. The [Na+](i) rise is Cl- dependent and inhibited by bumetanide. The Ca2+-ionophore ionomycin also causes a bumetanide-sensitive [Na+](i) rise. We propose that a Ca2+-mediated NKCC activity in acinar peripheral cells attributable to dopamine stimulation serves for basolateral Na+ uptake during saliva secretion and that the concomitantly transported Cl- is recycled back to the bath. KW - epithelial ion transport KW - Na+-K+-2Cl(-) cotransporter KW - MQAE KW - SBFI KW - 2P cross section Y1 - 2011 U6 - https://doi.org/10.1152/ajpcell.00320.2010 SN - 0363-6143 VL - 300 IS - 6 SP - C1323 EP - C1336 PB - American Chemical Society CY - Bethesda ER - TY - THES A1 - Köth, Anja T1 - Form- und Größenkontrollierte Synthese von Gold Nanopartikeln mit Maltose-modifiziertem Poly(ethylenimin) Y1 - 2011 CY - Potsdam ER - TY - JOUR A1 - Köpf, Michael H. A1 - Harder, Heiko A1 - Reiche, Jürgen A1 - Santer, Svetlana T1 - Impact of temperature on the LB patterning of DPPC on Mica JF - Langmuir N2 - The influence of the subphase temperature on the stripe pattern formation during Langmuir-Blodgett transfer (LB patterning) is investigated in a combined experimental and theoretical study. According to our experiments on the LB transfer of dipalmitoylphosphatidylcholine (DPPC) on planar mica substrates, even small temperature changes between 21.5 and 24.5 degrees C lead to significant changes in the monolayer patterns. For a constant surface pressure and dipper speed, the width of the stripes and the overall spatial period of the patterns increase with increasing subphase temperature. Because the stripe patterns are ascribed to alternating monolayer domains in the liquid-expanded and the liquid-condensed phases, the working regime for the formation of stripes is found to depend strongly on the respective surface pressure-area isotherm. These experimental findings are in accordance with the results of a theoretical investigation based on a model that takes hydrodynamics and the monolayer thermodynamics into account. Y1 - 2011 U6 - https://doi.org/10.1021/la202728t SN - 0743-7463 VL - 27 IS - 20 SP - 12354 EP - 12360 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Kupstat, Annette A1 - Kumke, Michael Uwe A1 - Hildebrandt, Niko T1 - Toward sensitive, quantitative point-of-care testing (POCT) of protein markers miniaturization of a homogeneous time-resolved fluoroimmunoassay for prostate-specific antigen detection JF - The analyst : the analytical journal of the Royal Society of Chemistry N2 - Point-of-care testing (POCT) systems which allow for a sensitive, quantitative detection of protein markers are extremely useful for the early detection and therapy progress monitoring of cancer. However, currently commercially available POCT devices are mainly limited to the qualitative detection of protein markers. In this study we demonstrate the successive miniaturization of a sensitive and fast assay for the quantitative detection of prostate-specific antigen (PSA) using a well established and clinically approved homogeneous time-resolved fluoroimmunoassay technology (TRACE (R)) on a commercial plate-reader system (KRYPTOR (R)). Regarding the initial requirements for the development of POCT devices we applied a 30-fold assay volume reduction (150 mu L to 5 mu L) to achieve a reasonable lab-on-a-chip volume and a 24-fold and 120-fold excitation pulse energy reduction to achieve reasonable pulse energies for low-cost miniature excitation sources. Due to highly efficient optimization of key POCT parameters our miniaturized PSA assay achieved a 30% increased sensitivity and a 2-fold improved limit of detection compared to the standard plate-reader method. Our results demonstrate the successful implementation of key parameters for a significant miniaturization and for cost reduction in the clinically approved KRYPTOR (R) platform for protein detection. The technological alterations required are easy-to-implement and can be immediately adapted for more than 30 diagnostic protein markers already available for the KRYPTOR (R) platform. These features strongly recommend our assay format to be utilized in innovative, sensitive, quantitative POCT of protein markers. Y1 - 2011 U6 - https://doi.org/10.1039/c0an00684j SN - 0003-2654 VL - 136 IS - 5 SP - 1029 EP - 1035 PB - Royal Society of Chemistry CY - Cambridge ER - TY - THES A1 - Kubo, Shiori T1 - Nanostructured carbohydrate-derived carbonaceous materials T1 - Nanostrukturierte kohlenstoffbasierte Materialien aus Kohlenhydraten N2 - Nanoporous carbon materials are widely used in industry as adsorbents or catalyst supports, whilst becoming increasingly critical to the developing fields of energy storage / generation or separation technologies. In this thesis, the combined use of carbohydrate hydrothermal carbonisation (HTC) and templating strategies is demonstrated as an efficient route to nanostructured carbonaceous materials. HTC is an aqueous-phase, low-temperature (e.g. 130 – 200 °C) carbonisation, which proceeds via dehydration / poly-condensation of carbon precursors (e.g. carbohydrates and their derivatives), allowing facile access to highly functional carbonaceous materials. Whilst possessing utile, modifiable surface functional groups (e.g. -OH and -C=O-containing moieties), materials synthesised via HTC typically present limited accessible surface area or pore volume. Therefore, this thesis focuses on the development of fabrication routes to HTC materials which present enhanced textural properties and well-defined porosity. In the first discussed synthesis, a combined hard templating / HTC route was investigated using a range of sacrificial inorganic templates (e.g. mesoporous silica beads and macroporous alumina membranes (AAO)). Via pore impregnation of mesoporous silica beads with a biomass-derived carbon source (e.g. 2-furaldehyde) and subsequent HTC at 180 oC, an inorganic / carbonaceous hybrid material was produced. Removal of the template component by acid etching revealed the replication of the silica into mesoporous carbonaceous spheres (particle size ~ 5 μm), representing the inverse morphological structure of the original inorganic body. Surface analysis (e.g. FTIR) indicated a material decorated with hydrophilic (oxygenated) functional groups. Further thermal treatment at increasingly elevated temperatures (e.g. at 350, 550, 750 oC) under inert atmosphere allowed manipulation of functionalities from polar hydrophilic to increasingly non-polar / hydrophobic structural motifs (e.g. extension of the aromatic / pseudo-graphitic nature), thus demonstrating a process capable of simultaneous control of nanostructure and surface / bulk chemistry. As an extension of this approach, carbonaceous tubular nanostructures with controlled surface functionality were synthesised by the nanocasting of uniform, linear macropores of an AAO template (~ 200 nm). In this example, material porosity could be controlled, showing increasingly microporous tube wall features as post carbonisation temperature increased. Additionally, by taking advantage of modifiable surface groups, the introduction of useful polymeric moieties (i.e. grafting of thermoresponsive poly(N-isopropylacrylamide)) was also demonstrated, potentially enabling application of these interesting tubular structures in the fields of biotechnology (e.g. enzyme immobilization) and medicine (e.g. as drug micro-containers). Complimentary to these hard templating routes, a combined HTC / soft templating route for the direct synthesis of ordered porous carbonaceous materials was also developed. After selection of structural directing agents and optimisation of synthesis composition, the F127 triblock copolymer (i.e. ethylene oxide (EO)106 propylene oxide (PO)70 ethylene oxide (EO)106) / D-Fructose system was extensively studied. D-Fructose was found to be a useful carbon precursor as the HTC process could be performed at 130 oC, thus allowing access to stable micellular phase. Thermolytic template removal from the synthesised ordered copolymer / carbon composite yielded functional cuboctahedron single crystalline-like particles (~ 5 μm) with well ordered pore structure of a near perfect cubic Im3m symmetry. N2 sorption analysis revealed a predominantly microporous carbonaceous material (i.e. Type I isotherm, SBET = 257 m2g-1, 79 % microporosity) possessing a pore size of ca. 0.9 nm. The addition of a simple pore swelling additive (e.g. trimethylbenzene (TMB)) to this system was found to direct pore size into the mesopore size domain (i.e. Type IV isotherm, SBET = 116 m2g-1, 60 % mesoporosity) generating pore size of ca. 4 nm. It is proposed that in both cases as HTC proceeds to generate a polyfuran-like network, the organised block copolymer micellular phase is essentially “templated”, either via hydrogen bonding between hydrophilic poly(EO) moiety and the carbohydrate or via hydrophobic interaction between hydrophobic poly(PO) moiety and forming polyfuran-like network, whilst the additive TMB presumably interact with poly(PO) moieties, thus swelling the hydrophobic region expanding the micelle template size further into the mesopore range. N2 - Nanoporöse kohlenstoffbasierte Materialien sind in der Industrie als Adsorbentien und Katalysatorträger weit verbreitet und gewinnen im aufstrebenden Bereich der Energiespeicherung/erzeugung und für Trennverfahren an wachsender Bedeutung. In der vorliegenden Arbeit wird gezeigt, dass die Kombination aus hydrothermaler Karbonisierung von Zuckern (HTC) mit Templatierungsstrategien einen effizienten Weg zu nanostrukturierten kohlenstoffbasierten Materialien darstellt. HTC ist ein in Wasser und bei niedrigen Temperaturen (130 - 200 °C) durchgeführter Karbonisierungsprozess, bei dem Zucker und deren Derivate einen einfachen Zugang zu hochfunktionalisierten Materialien erlauben. Obwohl diese sauerstoffhaltige Funktionalitäten auf der Oberfläche besitzen, an welche andere chemische Gruppen gebunden werden könnten, was die Verwendung für Trennverfahren und in der verzögerten Wirkstofffreisetzung ermöglichen sollte, ist die mittels HTC hergestellte Kohle für solche Anwendungen nicht porös genug. Das Ziel dieser Arbeit ist es daher, Methoden zu entwickeln, um wohldefinierte Poren in solchen Materialien zu erzeugen. Hierbei führte unter anderem der Einsatz von anorganischen formgebenden mesoporösen Silikapartikeln und makroporösen Aluminiumoxid-Membranen zum Erfolg. Durch Zugabe einer Kohlenstoffquelle (z. B. 2-Furfural), HTC und anschließender Entfernung des Templats konnten poröse kohlenstoffbasierte Partikel und röhrenförmige Nanostrukturen hergestellt werden. Gleichzeitig konnte durch eine zusätzliche Nachbehandlung bei hoher Temperatur (350-750 °C) auch noch die Oberflächenfunktionalität hin zu aromatischen Systemen verschoben werden. Analog zur Formgebung durch anorganische Template konnte mit sog. Soft-Templaten, z. B. PEO-PPO-PEO Blockcopolymeren, eine funktionelle poröse Struktur induziert werden. Hierbei machte man sich die Ausbildung geordneter Mizellen mit der Kohlenstoffquelle D-Fructose zu Nutze. Das erhaltene Material wies hochgeordnete Mikroporen mit einem Durchmesser von ca. 0,9 nm auf. Dieser konnte desweiteren durch Zugabe von Quell-Additiven (z. B. Trimethylbenzol) auf 4 nm in den mesoporösen Bereich vergrößert werden. Zusammenfassend lässt sich sagen, dass beide untersuchten Synthesewege nanostrukturierte kohlenstoffbasierte Materialien mit vielfältiger Oberflächenchemie liefern, und das mittels einer bei relativ niedriger Temperatur in Wasser ablaufenden Reaktion und einer billigen, nachhaltigen Kohlenstoffquelle. Die so hergestellten Produkte eröffnen vielseitige Anwendungsmöglichkeiten, z. B. zur Molekültrennung in der Flüssigchromatographie, in der Energiespeicherung als Anodenmaterial in Li-Ionen Akkus oder Superkondensatoren, oder als Trägermaterial für die gezielte Pharmakotherapie. KW - Nanostruktur KW - Kohlenstoff KW - Kohlenhydrate KW - Templating KW - hydrothermale Carbonisierung KW - Nanostructure KW - Carbon KW - Carbohydrate KW - Templating KW - Hydrothermal carbonisation Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-53157 ER - TY - JOUR A1 - Kröner, Dominik A1 - Krüger, Hartmut A1 - Thesen, Manuel W. T1 - Electronic structure calculations for Hole-Transporting Triphenylamine Derivatives in Polymer Light-Emitting Diodes JF - Macromolecular theory and simulations N2 - Hole-transporting polymers based on polyethene-triphenylamine derivatives are investigated with respect to their UV/Vis spectra. Two substituents, N-phenyl-1-naphthylamine and carbazole, are examined as their respective polymer light-emitting diodes (PLEDs) show very different luminous efficiencies. In order to identify the origin of these phenomena electronic structure calculations based on TD-DFT were performed using monomer models of the hole-transporting polymers. In experiment these hole-transporting polymers show very specific differences in their absorption and emission (fluorescence and phosphorescence) spectra. The analysis of the simulated absorption and emission spectra, the MOs as well as the ground and excited state geometries give explanations for the different optical performances of the corresponding PLEDs. KW - charge transport KW - luminescence KW - organic light-emitting diodes KW - polystyrenes KW - quantum chemistry Y1 - 2011 U6 - https://doi.org/10.1002/mats.201100016 SN - 1022-1344 VL - 20 IS - 9 SP - 790 EP - 805 PB - Wiley-Blackwell CY - Malden ER - TY - JOUR A1 - Kröner, Dominik A1 - Ehlert, Christopher A1 - Saalfrank, Peter A1 - Holländer, Andreas T1 - Ab initio calculations for XPS chemical shifts of poly(vinyl-trifluoroacetate) using trimer models JF - Surface science N2 - X-ray photoelectron spectra (XPS) of the polymer poly(vinyl-trifluoroacetate) show C(1s) binding energy shifts which are unusual because they are influenced by atoms which are several bonds away from the probed atom. In this work, the influence of the trifluoroacetate substituent on the 1s ionization potential of the carbon atoms of the polyethylene chain is investigated theoretically using mono-substituted, diad and triad models of trimers representing the polymer. Carbon 1s ionization energies are calculated by the Hartree-Fock theory employing Koopmans' theorem. The influence of the configuration and conformation of the functional groups as well as the degree of substitution are found to be important determinants of XPS spectra. It is further found that the 1s binding energy correlates in a linear fashion, with the total electrostatic potential at the position of the probe atom, and depends not only on nearest neighbor effects. This may have implications for the interpretation of high-resolution XP spectra. KW - Ab initio quantum chemical methods and calculations KW - X-ray photoelectron spectroscopy KW - Insulating films Y1 - 2011 U6 - https://doi.org/10.1016/j.susc.2011.05.021 SN - 0039-6028 VL - 605 IS - 15-16 SP - 1516 EP - 1524 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Kröner, Dominik T1 - Chiral distinction by ultrashort laser pulses electron wavepacket dynamics incorporating magnetic interactions JF - The journal of physical chemistry : A, Molecules, spectroscopy, kinetics, environment & general theory N2 - The qualitative and quantitative distinction of enantiomers is one of the key issues in chemical analysis. In the last years, circular dichroism (CD) has been combined with laser ionization mass spectrometry (LIMS), applying resonance enhanced multiphoton ionization (REMPI) with ultrashort laser pulses. We present theoretical investigations on the CD in the populations of the first electronic excited state of the REMPI process, caused by the interaction of 3-methylcyclopentanone with either left or right circular polarized fs-laser pulses. For this we performed multistate laser driven many electron dynamics based on ab initio electronic structure calculations, namely, TD-CIS(D)/6-311++(2d,2p). For a theoretical description of these experiments, a complete description of the field-dipole correlation is mandatory, including both electric field electric dipole and magnetic field magnetic dipole interactions. The effect of various pulse parameters on the CD are analyzed and compared with experimental results to gain further understanding of the key elements for an optimal distinction of enantiomers. Y1 - 2011 U6 - https://doi.org/10.1021/jp207270s SN - 1089-5639 VL - 115 IS - 50 SP - 14510 EP - 14518 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Kristen-Hochrein, Nora A1 - Laschewsky, André A1 - Miller, Reinhard A1 - von Klitzing, Regine T1 - Stability of foam Films of oppositely charged polyelectrolyte/surfactant mixtures - effect of isoelectric point JF - The journal of physical chemistry : B, Condensed matter, materials, surfaces, interfaces & biophysical chemistry N2 - In the present paper, the influence of the surfactant concentration and the degree of charge of a polymer on foam film properties of oppositely charged polyelectrolyte/surfactant mixtures has been investigated. To verify the assumption that the position of the isoelectric point (IEP) does not change the character of the foam film stabilities, the position of the IEP of the polyelectrolyte/surfactant mixtures has been shifted in two different ways. Within the first series of experiments, the foam. film properties were studied using a fixed surfactant concentration of 3 x 10(-5) M in the mixture. Due to the low surfactant concentration, this is a rather dilute system. In the second approach, a copolymer of nonionic and ionic monomer units was Used to lower the charge density of the polymer. This gave rise to additional interactions between the polyelectrolyte and the surfactant, which makes the description of the foam film behavior more complex. In both systems, the same characteristics of the foam film stabilities were found: The foam film stability is reduced toward the IEP of the system, followed by a destabilization around the IEP., At polyelectrolyte concentrations above the IEP, foam films are very stable. However, the concentration range where unstable films were formed was rather broad, and the mechanisms leading to the destabilization had different origins. The results were compared with former findings on PAMPS/C(14)TAB mixtures with an IEP of 10(-4)M.(1) Y1 - 2011 U6 - https://doi.org/10.1021/jp206964k SN - 1520-6106 VL - 115 IS - 49 SP - 14475 EP - 14483 PB - American Chemical Society CY - Washington ER - TY - THES A1 - Kristen, Juliane Ute T1 - Amphiphilic BAB-triblock copolymers bearing fluorocarbon groups : synthesis and self-organization in aqueous media T1 - Amphiphile BAB-Triblockcopolymere mit Fluorcarbon-Gruppen : Synthese und Selbstorganisation in wässrigen Medien N2 - In this work new fluorinated and non-fluorinated mono- and bifunctional trithiocarbonates of the structure Z-C(=S)-S-R and Z-C(=S)-S-R-S-C(=S)-Z were synthesized for the use as chain transfer agents (CTAs) in the RAFT-process. All newly synthesized CTAs were tested for their efficiency to moderate the free radical polymerization process by polymerizing styrene (M3). Besides characterization of the homopolymers by GPC measurements, end- group analysis of the synthesized block copolymers via 1H-, 19F-NMR, and in some cases also UV-vis spectroscopy, were performed attaching suitable fluorinated moieties to the Z- and/or R-groups of the CTAs. Symmetric triblock copolymers of type BAB and non-symmetric fluorine end- capped polymers were accessible using the RAFT process in just two or one polymerization step. In particular, the RAFT-process enabled the controlled polymerization of hydrophilic monomers such as N-isopropylacrylamide (NIPAM) (M1) as well as N-acryloylpyrrolidine (NAP) (M2) for the A-blocks and of the hydrophobic monomers styrene (M3), 2-fluorostyrene (M4), 3-fluorostyrene (M5), 4-fluorostyrene (M6) and 2,3,4,5,6-pentafluorostyrene (M7) for the B-blocks. The properties of the BAB-triblock copolymers were investigated in dilute, concentrated and highly concentrated aqueous solutions using DLS, turbidimetry, 1H- and 19F-NMR, rheology, determination of the CMC, foam height- and surface tension measurements and microscopy. Furthermore, their ability to stabilize emulsions and microemulsions and the wetting behaviour of their aqueous solutions on different substrates was investigated. The behaviour of the fluorine end-functionalized polymers to form micelles was studied applying DLS measurements in diluted organic solution. All investigated BAB-triblock copolymers were able to form micelles and show surface activity at room temperature in dilute aqueous solution. The aqueous solutions displayed moderate foam formation. With different types and concentrations of oils, the formation of emulsions could be detected using a light microscope. A boosting effect in microemulsions could not be found adding BAB-triblock copolymers. At elevated polymer concentrations, the formation of hydrogels was proved applying rheology measurements. N2 - Im Rahmen dieser Arbeit wurden neue fluorierte und unfluorierte mono- und bifunktionelle Trithiocarbonate der Typen Z-C(=S)-S-R und Z-C(=S)-S-R-S-C(=S)-Z zur Anwendung als CTAs (chain- transfer agents) im RAFT-Polymerisationsverfahren hergestellt. Alle CTAs wurden erfolgreich auf ihre Effizienz zur Steuerung des radikalischen Polymerisationsverfahrens hin durch Polymerisation von Styrol (M3) getestet. Neben GPC-Messungen wurden Endgruppenanalysen der synthetisierten Blockcopolymere mittels 1H-, 19F-NMR und in manchen Fällen auch UV-Vis Spektroskopie durchgeführt. Dazu wurden die Z- und/oder R-Gruppen der CTAs mit geeigneten fluorierten Gruppen versehen. Durch Anwendung des RAFT Verfahrens konnten symmetrische Triblockcopolymere vom Typ BAB bzw. mit einer Fluoralkylgruppe endgecappte unsymmetrische Polymere in nur zwei bzw. einem Polymerisationsschritt hergestellt werden. Das RAFT- Polymerisationsverfahren ermöglicht sowohl die Polymerisation hydrophiler Monomere wie N-Isopropylacrylamid (NIPAM) (M1) oder N-Acryloylpyrrolidin (NAP) (M2) für die A-Blöcke als auch der hydropoben Monomere Styrol (M3), 2-Fluorostyrol (M4), 3-Fluorostyrol (M5), 4- Fluorostyrol (M6) und 2,3,4,5,6- Pentafluorostyrol (M7) für die B-Blöcke. Die Eigenschaften der Blockcopolymere in verdünnten, konzentrierten und hochkonzentrierten wässrigen Lösungen wurden mittels DLS, Trübungsphotometrie, 1H- und 19F-NMR, Rheologie, CMC- sowie Schaumhöhen- und Oberflächenspannungsmessungen und Lichtmikroskopie untersucht. Weiterhin wurden ihre Eigenschaften als Emulgatoren und in Mikroemulsion untersucht. Das Micellbildungsverhalten der hydrophob endfunktionalisierten Polymere wurde mittels DLS Messungen in verdünnter organischer Lösung untersucht. Alle untersuchten BAB-Triblöcke bildeten Micellen und zeigten Oberflächenaktivität bei Raumtemperatur in verdünnter, wässriger Lösung. Weiterhin zeigen die wässrigen Lösungen der Polymere mäßige Schaumbildung. Mit verschiedenen Öltypen und Ölkonzentrationen wurden Emulsionen bzw. Mikroemulsionen gebildet. In Mikroemulsion wurde durch Zugabe von BAB-Triblockopolymeren kein Boosting-Effekt erzielt werden. Bei Untersuchung höherer Polymerkonzentrationen wurde die Bildung von Hydrogelen mittels rheologischer Messungen nachgewiesen. Verschiedene Substrate konnten benetzt werden. Die hydrophob endgecappten Polymere bilden in verdünnter organischer Lösung Micellen, die mittels DLS untersucht wurden, und zeigen somit Tensidverhalten in nichtwässriger Lösung. KW - Fluorierte Blockcopolymere KW - RAFT KW - Rheologie KW - Tenside KW - Gele KW - wässrige Systeme KW - thermisch schaltbare Polymere KW - fluorinated Blockcopolymers KW - RAFT-Polymerisation KW - rheology KW - surfactants KW - gels KW - aqueous systems KW - thermosensitive polymers Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-61782 ER - TY - JOUR A1 - Kreye, Oliver A1 - Toth, Tommy A1 - Meier, Michael A. R. T1 - Copolymers derived from rapeseed derivatives via ADMET and thiol-ene addition JF - European polymer journal N2 - Novel (co)polymers were synthesized from substances obtained from rapeseed via ADMET and thiol-ene additions. alpha,omega-Dienes derived from oleic and erucic acid were copolymerized with a ferulic acid derivative, a representative phenolic acid (p-hydroxycinnamic acid) present, for instance, in rapeseed cake. Copolymers with different ratios of these monomers were prepared via two different routes (ADMET and thiol-ene) and studied in detail. Both monomer and polymer synthesis were optimized in order to achieve high yielding synthetic procedures that meet the requirements of green chemistry. Some thermal properties of the resulting copolymer series were then studied and correlated to the co-monomer composition. KW - Rapeseed oil KW - Rapeseed cake KW - p-Hydroxycinnamic acids KW - alpha,omega-Dienes KW - ADMET polymerization KW - Thiol-ene addition Y1 - 2011 U6 - https://doi.org/10.1016/j.eurpolymj.2011.06.012 SN - 0014-3057 VL - 47 IS - 9 SP - 1804 EP - 1816 PB - Elsevier CY - Oxford ER - TY - JOUR A1 - Kreye, Oliver A1 - Toth, Tommy A1 - Meier, Michael A. R. T1 - Introducing multicomponent reactions to polymer science passerini reactions of renewable monomers JF - Journal of the American Chemical Society N2 - Combination of the Passerini three component-reaction (3CR) and olefin metathesis led to the formation of poly[1-(alkyl carbamoyl)alkyl alkanoates], a new class of polyesters with amide moieties in their side chain, from renewable resources. Two different approaches were studied and compared to each other. First, monomers were synthesized by the Passerini-3CR and then polymerized via acyclic diene metathesis. Alternatively, bifunctional monomers were synthesized by self-metathesis and then polymerized by Passerini-3CR. Both approaches led to the formation of high-molecular-weight polymers. Moreover, Passerini-3CRs were shown to be a versatile grafting-onto method. The results clearly demonstrate that the Passerini-3CR offers an interesting new access to monomers and polymers and thus broadens the synthetic portfolio of polymer science. Y1 - 2011 U6 - https://doi.org/10.1021/ja1113003 SN - 0002-7863 VL - 133 IS - 6 SP - 1790 EP - 1792 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Kreye, Oliver A1 - Toth, Tommy A1 - Meier, Michael A. R. T1 - Poly-alpha,beta-unsaturated aldehydes derived from castor oil via ADMET polymerization JF - European journal of lipid science and technology N2 - 10-Undecenal, derived by pyrolysis and reduction from castor oil, was almost quantitatively transformed into the corresponding aldol condensation product under basic conditions. This alpha,omega-diene monomer was polymerized using acyclic diene metathesis (ADMET) polymerization. In a catalyst screening, four of nine different ruthenium-based metathesis catalysts showed good reactivity under neat conditions at 80 degrees C in the presence of 1,4-benzoquinone and polymers with molecular weights up to 11 kDa were formed. Furthermore, the (1)H NMR spectra showed that the metathesis catalysts tolerate the alpha,beta-unsaturated aldehyde function and due to the addition of benzoquinone, the degree of double bond isomerization was low. Further experiments investigating reduced catalyst amounts (down to 0.2 mol%) and the temperature dependence of these ADMET polymerizations gave also satisfying results for the formation of poly-alpha,beta-unsaturated aldehydes. Moreover, ADMET polymerizations with different amounts of methyl 10-undecenoate as chain-stopper were performed and the integrals of the corresponding (1)H NMR spectra allowed the determination of an absolute degree of polymerization. Finally, a reduction of a poly-alpha,beta-unsaturated aldehyde with sodium borohydride was accomplished. The resulting poly-(allyl alcohol) could be a useful compound in the generation of polymer networks like polyesters, polyurethanes, and polycarbonates and thus be of high interest in materials research. KW - ADMET KW - Aldol condensation KW - Castor oil KW - Poly(allyl alcohol)s KW - Poly-alpha,beta-unsaturated aldehydes Y1 - 2011 U6 - https://doi.org/10.1002/ejlt.201000108 SN - 1438-7697 VL - 113 IS - 1 SP - 31 EP - 38 PB - Wiley-VCH CY - Weinheim ER - TY - THES A1 - Kraupner, Alexander T1 - Neuartige Synthese magnetischer Nanostrukturen: Metallcarbide und Metallnitride der Übergangsmetalle Fe/Co/Ni T1 - Novel synthesis of magnetic nanostructures: metal carbides and metal nitrides of transition metals Fe/Co/Ni N2 - Magnetische Nanopartikel bieten ein großes Potential, da sie einerseits die Eigenschaften ihrer Bulk-Materialien besitzen und anderseits, auf Grund ihrer Größe, über komplett unterschiedliche magnetische Eigenschaften verfügen können; Superparamagnetismus ist eine dieser Eigenschaften. Die meisten etablierten Anwendungen magnetischer Nanopartikel basieren heutzutage auf Eisenoxiden. Diese bieten gute magnetische Eigenschaften, sind chemisch relativ stabil, ungiftig und lassen sich auf vielen Synthesewegen relativ einfach herstellen. Die magnetischen Eigenschaften der Eisenoxide sind materialabhängig aber begrenzt, weshalb nach anderen Verbindungen mit besseren Eigenschaften gesucht werden muss. Eisencarbid (Fe3C) kann eine dieser Verbindungen sein. Dieses besitzt vergleichbare positive Eigenschaften wie Eisenoxid, jedoch viel bessere magnetische Eigenschaften, speziell eine höhere Sättigungsmagnetisierung. Bis jetzt wurde Fe3C hauptsächlich in Gasphasenabscheidungsprozessen synthetisiert oder als Nebenprodukt bei der Synthese von Kohlenstoffstrukturen gefunden. Eine Methode, mit der gezielt Fe3C-Nanopartikel und andere Metallcarbide synthetisiert werden können, ist die „Harnstoff-Glas-Route“. Neben den Metallcarbiden können mit dieser Methode auch die entsprechenden Metallnitride synthetisiert werden, was die breite Anwendbarkeit der Methode unterstreicht. Die „Harnstoff-Glas-Route“ ist eine Kombination eines Sol-Gel-Prozesses mit einer anschließenden carbothermalen Reduktion/Nitridierung bei höheren Temperaturen. Sie bietet den Vorteil einer einfachen und schnellen Synthese verschiedener Metallcarbide/nitride. Der Schwerpunkt in dieser Arbeit lag auf der Synthese von Eisencarbiden/nitriden, aber auch Nickel und Kobalt wurden betrachtet. Durch die Variation der Syntheseparameter konnten verschiedene Eisencarbid/nitrid Nanostrukturen synthetisiert werden. Fe3C-Nanopartikel im Größenbereich von d = 5 – 10 nm konnten, durch die Verwendung von Eisenchlorid, hergestellt werden. Die Nanopartikel weisen durch ihre geringe Größe superparamagnetische Eigenschaften auf und besitzen, im Vergleich zu Eisenoxid Nanopartikeln im gleichen Größenbereich, eine höhere Sättigungsmagnetisierung. Diese konnten in fortführenden Experimenten erfolgreich in ionischen Flüssigkeiten und durch ein Polymer-Coating, im wässrigen Medium, dispergiert werden. Desweiteren wurde durch ein Templatieren mit kolloidalem Silika eine mesoporöse Fe3C-Nanostruktur hergestellt. Diese konnte erfolgreich in der katalytischen Spaltung von Ammoniak getestet werden. Mit der Verwendung von Eisenacetylacetonat konnten neben Fe3C-Nanopartikeln, nur durch Variation der Reaktionsparameter, auch Fe7C3- und Fe3N-Nanopartikel synthetisiert werden. Speziell für die Fe3C-Nanopartikel konnte die Sättigungsmagnetisierung, im Vergleich zu den mit Eisenchlorid synthetisierten Nanopartikeln, nochmals erhöht werden. Versuche mit Nickelacetat führten zu Nickelnitrid (Ni3N) Nanokristallen. Eine zusätzliche metallische Nickelphase führte zu einer Selbstorganisation der Partikel in Scheiben-ähnliche Überstrukturen. Mittels Kobaltacetat konnten, in Sphären aggregierte, metallische Kobalt Nanopartikel synthetisiert werden. Kobaltcarbid/nitrid war mit den gegebenen Syntheseparametern nicht zugänglich. N2 - Magnetic nanoparticles offer a great potential, because they exhibit on the one hand the properties of their bulk materials and on the other hand, because of their size, completely different magnetic properties. The most established applications of magnetic nanoparticles are based on iron oxide. These oxides have good magnetic properties, they are chemical relatively stable, non toxic and easy to prepare. But the magnetic properties are limited. Therefore, we need new materials with improved magnetic properties. Iron carbide (Fe3C) could be one of these materials. Up to now, Fe3C was mainly synthesized in chemical vapor deposition processes (CVD) or was found as side product in the synthesis of carbon structures. A method for the systematical synthesis of metal carbides is the “Urea-Glass-Route”. In addition to the synthesis of metal carbides, this method allows to synthesize metal nitrides, which shows the broad practicability. The “Urea-Glass-Route” is a combination of a sol-gel process with following carbothermal reduction/nitridation at higher temperatures. The method is fast and simple and it is possible to synthesis different metal carbides/nitrides. The main topic of this work is the synthesis of iron carbide/nitride, but also cobalt and nickel is examined. By varying the synthesis parameters, different iron carbide/nitride nanostructures could be synthesized. With the use of iron chloride, Fe3C nanoparticles, in the size range of d = 5 – 10 nm, could be produced. Because of their small size, the particles show superparamagnetism and compared to iron oxide particles (in the same size range) a higher saturation magnetization. In following experiments, the particles could be successfully dispersed in an ionic liquid and with a polymer coating in aqueous medium. Furthermore, via templating with colloidal silica a mesoporous Fe3C structure could be synthesized. The material could be successfully tested in the catalytic ammonia decomposition. By changing the iron source to iron acetylacetonate, Fe7C3 and Fe3N nanoparticles, in addition to Fe3C, could be also synthesized. With nickel acetate it was possible to synthesize nickel nitride (Ni3N) nano crystals. An additional metallic nickel phase in the sample leads to a self organization to disk-like superlattice. Via cobalt acetate, in spheres aggregated, metallic cobalt nanoparticles could be synthesized. Cobalt carbide or nitride was not accessible under these synthesis parameters. KW - Carbide KW - Nitride KW - Eisen KW - Magnetismus KW - Nanopartikel KW - carbides KW - nitrides KW - iron KW - magnetism KW - nanoparticles Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-52314 ER - TY - GEN A1 - Kramer, Markus A1 - Kleinpeter, Erich T1 - A conformational study of N-acetyl glucosamine derivatives utilizing residual dipolar couplings (vol 212, pg 174, 2011) T2 - Journal of magnetic resonance Y1 - 2011 U6 - https://doi.org/10.1016/j.jmr.2011.09.017 SN - 1090-7807 VL - 213 IS - 1 SP - 210 EP - 211 PB - Elsevier CY - San Diego ER - TY - JOUR A1 - Kramer, Markus A1 - Kleinpeter, Erich T1 - A conformational study of N-acetyl glucosamine derivatives utilizing residual dipolar couplings JF - Journal of magnetic resonance N2 - The conformational analyses of six non-rigid N-acetyl glucosamine (NAG) derivatives employing residual dipolar couplings (RDCs) and NOEs together with molecular dynamics (MD) simulations are presented. Due to internal dynamics we had to consider different conformer ratios existing in solution. The good quality of the correlation between theoretically and experimentally obtained RDCs show the correctness of the calculated conformers even if the ratios derived from the MD simulations do not exactly meet the experimental data. If possible, the results were compared to former published data and commented. KW - NMR KW - Residual dipolar couplings KW - Molecular dynamics KW - N-acetyl glucosamine derivatives KW - Carbohydrates Y1 - 2011 U6 - https://doi.org/10.1016/j.jmr.2011.06.029 SN - 1090-7807 VL - 212 IS - 1 SP - 174 EP - 185 PB - Elsevier CY - San Diego ER - TY - THES A1 - Kramer, Markus T1 - NMR-spektroskopische Untersuchungen an potentiellen Chitinaseinhibitoren im freien und protein-gebunden Zustand Y1 - 2011 CY - Potsdam ER -