TY - GEN A1 - Varykhalov, Andrei A1 - Freyse, Friedrich A1 - Aguilera, Irene A1 - Battiato, Marco A1 - Krivenkov, Maxim A1 - Marchenko, Dmitry A1 - Bihlmayer, Gustav A1 - Blugel, Stefan A1 - Rader, Oliver A1 - Sanchez-Barriga, Jaime T1 - Effective mass enhancement and ultrafast electron dynamics of Au(111) surface state coupled to a quantum well T2 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - We show that, although the equilibrium band dispersion of the Shockley-type surface state of two-dimensional Au(111) quantum films grown on W(110) does not deviate from the expected free-electron-like behavior, its nonequilibrium energy-momentum dispersion probed by time- and angle-resolved photoemission exhibits a remarkable kink above the Fermi level due to a significant enhancement of the effective mass. The kink is pronounced for certain thicknesses of the Au quantum well and vanishes in the very thin limit. We identify the kink as induced by the coupling between the Au(111) surface state and emergent quantum-well states which probe directly the buried gold-tungsten interface. The signatures of the coupling are further revealed by our time-resolved measurements which show that surface state and quantum-well states thermalize together behaving as dynamically locked electron populations. In particular, relaxation of hot carriers following laser excitation is similar for both surface state and quantum-well states and much slower than expected for a bulk metallic system. The influence of quantum confinement on the interplay between elementary scattering processes of the electrons at the surface and ultrafast carrier transport in the direction perpendicular to the surface is shown to be the reason for the slow electron dynamics. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1354 KW - AG KW - films Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-549892 SN - 1866-8372 IS - 1 ER - TY - GEN A1 - Machatschek, Rainhard Gabriel A1 - Schöne, Anne-Christin A1 - Raschdorf, Elisa A1 - Ihlenburg, Ramona A1 - Schulz, Burkhard A1 - Lendlein, Andreas T1 - Interfacial properties of morpholine-2,5-dione-based oligodepsipeptides and multiblock copolymers T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Oligodepsipeptides (ODPs) with alternating amide and ester bonds prepared by ring-opening polymerization of morpholine-2,5-dione derivatives are promising matrices for drug delivery systems and building blocks for multifunctional biomaterials. Here, we elucidate the behavior of three telechelic ODPs and one multiblock copolymer containing ODP blocks at the air-water interface. Surprisingly, whereas the oligomers and multiblock copolymers crystallize in bulk, no crystallization is observed at the air-water interface. Furthermore, polarization modulation infrared reflection absorption spectroscopy is used to elucidate hydrogen bonding and secondary structures in ODP monolayers. The results will direct the development of the next ODP-based biomaterial generation with tailored properties for highly sophisticated applications. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1106 KW - block-copolymer KW - enzymatic degradation KW - poly(ester amide)s KW - controlled-release KW - films KW - nanocarriers Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-469755 SN - 1866-8372 IS - 1106 SP - 170 EP - 180 ER - TY - GEN A1 - Schaal, Frederik A1 - Rutloh, Michael A1 - Weidenfeld, Susanne A1 - Stumpe, Joachim A1 - Michler, Peter A1 - Pruss, Christof A1 - Osten, Wolfgang T1 - Optically addressed modulator for tunable spatial polarization control T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - We present an optically addressed non-pixelated spatial light modulator. The system is based on reversible photoalignment of a LC cell using a red light sensitive novel azobenzene photoalignment layer. It is an electrode-free device that manipulates the liquid crystal orientation and consequently the polarization via light without artifacts caused by electrodes. The capability to miniaturize the spatial light modulator allows the integration into a microscope objective. This includes a miniaturized 200 channel optical addressing system based on a VCSEL array and hybrid refractive-diffractive beam shapers. As an application example, the utilization as a microscope objective integrated analog phase contrast modulator is shown. (C) 2018 Optical Society of America under the terms of the OSA Open Access Publishing Agreement T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1001 KW - nematic liquid crystals KW - command surfaces KW - light modulator KW - alignment KW - films KW - polymer Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-446263 SN - 1866-8372 IS - 1001 SP - 28119 EP - 28130 ER - TY - GEN A1 - Feldmann, David A1 - Maduar, Salim R. A1 - Santer, Mark A1 - Lomadze, Nino A1 - Vinogradova, Olga I. A1 - Santer, Svetlana T1 - Manipulation of small particles at solid liquid interface BT - light driven diffusioosmosis N2 - The strong adhesion of sub-micron sized particles to surfaces is a nuisance, both for removing contaminating colloids from surfaces and for conscious manipulation of particles to create and test novel micro/nano-scale assemblies. The obvious idea of using detergents to ease these processes suffers from a lack of control: the action of any conventional surface-modifying agent is immediate and global. With photosensitive azobenzene containing surfactants we overcome these limitations. Such photo-soaps contain optical switches (azobenzene molecules), which upon illumination with light of appropriate wavelength undergo reversible trans-cis photo-isomerization resulting in a subsequent change of the physico-chemical molecular properties. In this work we show that when a spatial gradient in the composition of trans- and cis- isomers is created near a solid-liquid interface, a substantial hydrodynamic flow can be initiated, the spatial extent of which can be set, e.g., by the shape of a laser spot. We propose the concept of light induced diffusioosmosis driving the flow, which can remove, gather or pattern a particle assembly at a solid-liquid interface. In other words, in addition to providing a soap we implement selectivity: particles are mobilized and moved at the time of illumination, and only across the illuminated area. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 293 KW - azobenzene KW - brushes KW - films KW - genomic DNA conformation KW - gradients KW - optical manipulation KW - photocontrol KW - photosensitive surfactants KW - tracking KW - transport Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-100338 ER - TY - THES A1 - Winkler, Henning T1 - Synthese von thermoplastisch verarbeitbaren Fettsäure-Acylderivaten der Stärke und Proteine T1 - Synthesis of thermoplastic processable fatty acid acyl derivatives of starch and proteins N2 - In den vergangenen Jahren wurden stetig wachsende Produktionskapazitäten von Biokunststoffen aus nachwachsenden Rohstoffe nverzeichnet. Trotz großer Produktionskapazitäten und einem geeigneten Eigenschaftsprofil findet Stärke nur als hydrophile, mit Weichmachern verarbeitete thermoplastische Stärke (TPS) in Form von Blends mit z. B. Polyestern Anwendung. Gleiches gilt für Kunststoffe auf Proteinbasis. Die vorliegende Arbeit hat die Entwicklung von Biokunststoffen auf Stärkebasis zum Ziel, welche ohne externe Weichmacher thermoplastisch verarbeitbar und hydrophob sind sowie ein mechanisches Eigenschaftsprofil aufweisen, welches ein Potenzial zur Herstellung von Materialien für eine Anwendung als Verpackungsmittel bietet. Um die Rohstoffbasis für Biokunststoffe zu erweitern, soll das erarbeitete Konzept auf zwei industriell verfügbare Proteintypen, Zein und Molkenproteinisolat (WPI), übertragen werden. Als geeignete Materialklasse wurden Fettsäureester der Stärke herausgearbeitet. Zunächst fand ein Vergleich der Säurechlorid-Veresterung und der Umesterung von Fettsäurevinylestern statt, woraus letztere als geeignetere Methode hervorging. Durch Variation der Reaktionsparameter konnte diese optimiert und auf eine Serie der Fettsäurevinylester von Butanoat bis Stearat für DS-Werte bis zu 2,2-2,6 angewandt werden. Möglich war somit eine systematische Studie unter Variation der veresterten Fettsäure sowie des Substitutionsgrades (DS). Sämtliche Produkte mit einem DS ab 1,5 wiesen eine ausgprägte Löslichkeit in organischen Lösungsmitteln auf wodurch sowohl die Aufnahme von NMR-Spektren als auch Molmassenbestimmung mittels Größenausschlusschromatographie mit gekoppelter Mehrwinkel-Laserlichtstreuung (GPC-MALLS) möglich waren. Durch dynamische Lichtstreuung (DLS) wurde das Löslichkeitsverhalten veranschaulicht. Sämtliche Produkte konnten zu Filmen verarbeitet werden, wobei Materialien mit DS 1,5-1,7 hohe Zugfestigkeiten (bis zu 42 MPa) und Elastizitätsmodule (bis 1390 MPa) aufwiesen. Insbesondere Stärkehexanoat mit DS <2 sowie Stärkebutanoat mit DS >2 hatten ein mechanisches Eigenschaftsprofil, welches insbesondere in Bezug auf die Festigkeit/Steifigkeit vergleichbar mit Verpackungsmaterialien wie Polyethylen war (Zugfestigkeit: 15-32 MPa, E-Modul: 300-1300 MPa). Zugfestigkeit und Elastizitätsmodul nahmen mit steigender Kettenlänge der veresterten Fettsäure ab. Ester längerkettiger Fettsäuren (C16-C18) waren spröde. Über Weitwinkel-Röntgenstreuung (WAXS) und Infrarotspektroskopie (ATR-FTIR) konnte der Verlauf der Festigkeiten mit einer zunehmenden Distanz der Stärke im Material begründet werden. Es konnten von DS und Kettenlänge abhängige Glasübergänge detektiert werden, die kristallinen Strukturen der langkettigen Fettsäuren zeigten einen Schmelzpeak. Die Hydrophobie der Filme wurde anhand von Kontaktwinkeln >95° gegen Wasser dargestellt. Blends mit biobasierten Polyterpenen sowie den in der Arbeit hergestellten Zein-Acylderivaten ermöglichten eine weitere Verbesserung der Zugfestigkeit bzw. des Elastizitätsmoduls hochsubstituierter Produkte. Eine thermoplastische Verarbeitung mittels Spritzgießen war sowohl für Produkte mit hohem als auch mittlerem DS-Wert ohne jeglichen Zusatz von Weichmachern möglich. Es entstanden homogene, transparente Prüfstäbe. Untersuchungen der Härte ergaben auch hier für Stärkehexanoat und –butanoat mit Polyethylen vergleichbare Werte. Ausgewählte Produkte wurden zu Fasern nach dem Schmelzspinnverfahren verarbeitet. Hierbei wurden insbesondere für hochsubstituierte Derivate homogenen Fasern erstellt, welche im Vergleich zur Gießfolie signifikant höhere Zugfestigkeiten aufwiesen. Stärkeester mit mittlerem DS ließen sich ebenfalls verarbeiten. Zunächst wurden für eine Übertragung des Konzeptes auf die Proteine Zein und WPI verschiedene Synthesemethoden verglichen. Die Veresterung mit Säurechloriden ergab hierbei die höchsten Werte. Im Hinblick auf eine gute Löslichkeit in organischen Lösungsmitteln wurde für WPI die Veresterung mit carbonyldiimidazol (CDI)-aktivierten Fettsäuren in DMSO und für Zein die Veresterung mit Säu-rechloriden in Pyridin bevorzugt. Es stellte sich heraus, dass acyliertes WPI zwar hydrophob, jedoch ohne Weichmacher nicht thermoplastisch verarbeitet werden konnte. Die Erstellung von Gießfolien führte zu Sprödbruchverhalten. Unter Zugabe der biobasierten Ölsäure wurde die Anwendung von acyliertem WPI als thermoplastischer Filler z. B. in Blends mit Stärkeestern dargestellt. Im Gegensatz hierzu zeigte acyliertes Zein Glasübergänge <100 °C bei ausreichender Stabilität (150-200 °C). Zeinoleat konnte ohne Weichmacher zu einer transparenten Gießfolie verarbeitet werden. Sämtliche Derivate erwiesen sich als ausgeprägt hydrophob. Zeinoleat konnte über das Schmelzspinnverfahren zu thermoplastischen Fasern verarbeitet werden. N2 - In recent years, a steadily growing production capacity of bioplastic based on renewable resources was noticed. Despite its huge production capacities and an appropriate property profile (ubiquitous occurrence, easy extraction), starch is only applied in addition of plasticizers in a hydrophilic, thermoplastic form in blends with e. g. polyesters. The same applies to bioplastics based on proteins. The actual study has the aim to develop starch-based bioplastics, which are hydrophobic, thermoplastic without the addition of any plasticizer and have mechanical properties to be a suitable alternative material in the area of food packaging. To obtain a variation of the raw materials for bioplastics, the concept shall be applied to two types of industrial available proteins, whey protein isolate (WPI) and Zein. Fatty acid esters of starch came out to be a suitable class of materials. Initially, the methods of esterifying acid chlorides and the transesterification of fatty acid vinyl esters were compared with the latter being more appropriate. Reaction parameters of this method were optimized and it was applied to a complete series of vinyl ester reagents (butanoate to stearate), leading to degree of substitution (DS)-values up to 2.2-2.6. With that, a systematic study of the variation of the fatty acid ester chain as well as the DS became possible. It came out that all products with a DS >1.5 showed a well-marked solubility in organic solvents, whereby solution NMR-studies as well as measurements of the molecular weight distributions by using size exclusion chroma-tography with multi-angle laser light scattering (SEC-MALLS) were possible. The different solution behavior was studied by dynamic light scattering (DLS). All soluble products could be formed into films via casting, where materials with a DS of 1.5-1.7 showed the highest values concerning tensile strength (up to 42 MPa) and Youngs modulus (up to 1390 MPa). Especially starch hexanoate with DS <2 and starch butanoate with a DS >2 revealed mechanical properties which are comparable to usually applied polymers for food packaging, e. g. polyethylene (tensile strength: 15-20 MPa, E-Mod: 300-1300 MPa). Tensile strength and Youngs modulus were reduced with increasing length of the esterified fatty acid. Wide-angle X-Ray scattering (WAXS) and infrared spectroscopy (ATR-FTIR) explained this tendency by an increasing intermolecular distance of the starch in the material. Glassy transitions of the materials were detected and showed a dependency on the type of esterified fatty acid and the DS. The crystalline structures of the esterified long-chain fatty acids revealed a melting peak. All films came out to be hydrophobic with contact angles against water >95°. The tensile strength and the Youngs modulus of the highly substituted products could be further improved by blending them with biobased polyterpenes as well as the acylated Zein. A thermoplastic processing without the use of any plasticizer additives was possible for products with a medium and high DS. Homogeneous, transparent testing specimens were obtained. The specific mechanical values were comparable with the casted films, although the highest values for the tensile strength and the elongation were lower. Investigations of the hardness showed comparable values to polyethylene. Selected samples were further processed to fibers by melt spinning. Especially starch esters with high DS revealed homogeneous fibers with a significant increase in the tensile strength compared to the film or testing specimen. Even fatty acid starch esters with a medium DS were processed by the melt-spinning, but their higher glassy transition lead to a reduced softening behavior. To transfer this concept to the class of proteins, different methods of synthesis were studied in the first step, which differed in their amount of acylation. The acylation using fatty acid chlorides lead to highest values. With regard to a well-marked organic solvent solubility, in the case of WPI the acylation with carbonyldiimidazol (CDI)-activated fatty acid was established. For Zein, the acid chloride acylation in pyridine gave the desired results. It came out the fatty acid acylated soluble WPI could not be thermoplastic processed without additional plasticizers. By using biobased oleic acid as additive, the potential of acylated WPI as a thermoplastic filler in blends with e. g. fatty acid esters of starch was shown. In contrast, fatty acid acyl derivatives of Zein revealed well marked glassy transitions <100 °C with an adequate thermal stability. While Zeinoleate could be formed into transparent films via solvent casting without any plasticizer additives, low amounts of tall oil enabled film-forming in the case of acyl derivatives with shorter fatty acids as well. All derivatives revealed a well-marked hydrophobicity. Finally, Zeinoleate was thermoplastically processed into fibers by melt-spinning without any further additives. KW - Stärke KW - Proteine KW - thermoplastisch KW - Gießfolien KW - Fasern KW - starch KW - proteins KW - thermoplastic KW - films KW - casted-films KW - fibres Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-71089 ER - TY - GEN A1 - Anton, Peter A1 - Laschewsky, André A1 - Ward, M. D. T1 - Solubilization control by redox-switching of polysoaps N2 - Reversible changes in the self-organization of polysoaps may be induced by controlling their charge numbers via covalently bound redox moieties. This is illustrated with two viologen polysoaps, which in response to an electrochemical stimulus, change their solubility and aggregation in water, leading from homogeneously dissolved and aggregated molecules to collapsed ones and vice verse. Using the electrochemical quartz crystal microbalance (EQCM), it could be shown that the reversibility of this process is better than 95% in 16 cycles. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - paper 084 KW - Quartz Crystal KW - microbalance KW - films KW - Electrochemistry KW - viologen Y1 - 1995 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-17336 ER -