TY - JOUR A1 - Villatoro Leal, José Andrés A1 - Zühlke, Martin A1 - Riebe, Daniel A1 - Beitz, Toralf A1 - Weber, Marcus A1 - Löhmannsröben, Hans-Gerd T1 - Sub-ambient pressure IR-MALDI ion mobility spectrometer for the determination of low and high field mobilities JF - Analytical and bioanalytical chemistry : a merger of Fresenius' journal of analytical chemistry, Analusis and Quimica analitica N2 - A new ion mobility (IM) spectrometer, enabling mobility measurements in the pressure range between 5 and 500 mbar and in the reduced field strength range E/N of 5-90 Td, was developed and characterized. Reduced mobility (K-0) values were studied under low E/N (constant value) as well as high E/N (deviation from low field K-0) for a series of molecular ions in nitrogen. Infrared matrix-assisted laser desorption ionization (IR-MALDI) was used in two configurations: a source working at atmospheric pressure (AP) and, for the first time, an IR-MALDI source working with a liquid (aqueous) matrix at sub-ambient/reduced pressure (RP). The influence of RP on IR-MALDI was examined and new insights into the dispersion process were gained. This enabled the optimization of the IM spectrometer for best analytical performance. While ion desolvation is less efficient at RP, the transport of ions is more efficient, leading to intensity enhancement and an increased number of oligomer ions. When deciding between AP and RP IR-MALDI, a trade-off between intensity and resolving power has to be considered. Here, the low field mobility of peptide ions was first measured and compared with reference values from ESI-IM spectrometry (at AP) as well as collision cross sections obtained from molecular dynamics simulations. The second application was the determination of the reduced mobility of various substituted ammonium ions as a function of E/N in nitrogen. The mobility is constant up to a threshold at high E/N. Beyond this threshold, mobility increases were observed. This behavior can be explained by the loss of hydrated water molecules. KW - ion mobility spectrometry KW - IR-MALDI KW - high field mobility KW - dub-ambient KW - pressure KW - peptides Y1 - 2020 U6 - https://doi.org/10.1007/s00216-020-02735-0 SN - 1618-2642 SN - 1618-2650 VL - 412 IS - 22 SP - 5247 EP - 5260 PB - Springer CY - Heidelberg ER - TY - JOUR A1 - Fandrich, Artur A1 - Buller, Jens A1 - Memczak, Henry A1 - Stoecklein, W. A1 - Hinrichs, K. A1 - Wischerhoff, E. A1 - Schulz, B. A1 - Laschewsky, André A1 - Lisdat, Fred T1 - Responsive Polymer-Electrode Interface-Study of its Thermo- and pH-Sensitivity and the Influence of Peptide Coupling JF - Electrochimica acta : the journal of the International Society of Electrochemistry (ISE) N2 - This study introduces a thermally responsive, polymer-based electrode system. The key component is a surface-attached, temperature-responsive poly(oligoethylene glycol) methacrylate (poly(OEGMA)) type polymer bearing photoreactive benzophenone and carboxy groups containing side chains. The responsive behavior of the polymer in aqueous media has been investigated by turbidimetry measurements. Polymer films are formed on gold substrates by means of the photoreactive 2(dicyclohexylphosphino)benzophenone (DPBP) through photocrosslinking. The electrochemical behavior of the resulting polymer-substrate interface has been investigated in buffered [Fe(CN)6](3-)/[Fe (CN)6](4-)solutions at room temperature and under temperature variation by cyclic voltammetry (CV). The CV experiments show that with increasing temperature structural changes of the polymer layer occur, which alter the output of the electrochemical measurement. Repeated heating/cooling cycles analyzed by CV measurements and pH changes analyzed by quartz crystal microbalance with dissipation monitoring (QCM-D) reveal the reversible nature of the restructuring process. The immobilized films are further modified by covalent coupling of two small biomolecules - a hydrophobic peptide and a more hydrophilic one. These attached components influence the hydrophobicity of the layer in a different way the resulting change of the temperature-caused behavior has been studied by CV indicating a different state of the polymer after coupling of the hydrophobic peptide. KW - Stimuli-responsive materials KW - electroanalysis KW - modified electrode KW - bioreceptors KW - peptides KW - surface modification KW - cyclic voltammetry KW - IR ellipsometry KW - quartz crystal microbalance Y1 - 2017 U6 - https://doi.org/10.1016/j.electacta.2017.01.080 SN - 0013-4686 SN - 1873-3859 VL - 229 SP - 325 EP - 333 PB - Elsevier CY - Oxford ER - TY - JOUR A1 - Wolff, Martin A1 - Gast, Klaus A1 - Evers, Andreas A1 - Kurz, Michael A1 - Pfeiffer-Marek, Stefania A1 - Schüler, Anja A1 - Seckler, Robert A1 - Thalhammer, Anja T1 - A Conserved Hydrophobic Moiety and Helix-Helix Interactions Drive the Self-Assembly of the Incretin Analog Exendin-4 JF - Biomolecules N2 - Exendin-4 is a pharmaceutical peptide used in the control of insulin secretion. Structural information on exendin-4 and related peptides especially on the level of quaternary structure is scarce. We present the first published association equilibria of exendin-4 directly measured by static and dynamic light scattering. We show that exendin-4 oligomerization is pH dependent and that these oligomers are of low compactness. We relate our experimental results to a structural hypothesis to describe molecular details of exendin-4 oligomers. Discussion of the validity of this hypothesis is based on NMR, circular dichroism and fluorescence spectroscopy, and light scattering data on exendin-4 and a set of exendin-4 derived peptides. The essential forces driving oligomerization of exendin-4 are helix–helix interactions and interactions of a conserved hydrophobic moiety. Our structural hypothesis suggests that key interactions of exendin-4 monomers in the experimentally supported trimer take place between a defined helical segment and a hydrophobic triangle constituted by the Phe22 residues of the three monomeric subunits. Our data rationalize that Val19 might function as an anchor in the N-terminus of the interacting helix-region and that Trp25 is partially shielded in the oligomer by C-terminal amino acids of the same monomer. Our structural hypothesis suggests that the Trp25 residues do not interact with each other, but with C-terminal Pro residues of their own monomers. KW - biophysics KW - diabetes KW - peptides KW - oligomerization KW - conformational change KW - molecular modeling KW - static and dynamic light scattering KW - spectroscopy Y1 - 2021 U6 - https://doi.org/10.3390/biom11091305 SN - 2218-273X VL - 11 IS - 9 PB - MDPI CY - Basel ER - TY - GEN A1 - Wolff, Martin A1 - Gast, Klaus A1 - Evers, Andreas A1 - Kurz, Michael A1 - Pfeiffer-Marek, Stefania A1 - Schüler, Anja A1 - Seckler, Robert A1 - Thalhammer, Anja T1 - A Conserved Hydrophobic Moiety and Helix-Helix Interactions Drive the Self-Assembly of the Incretin Analog Exendin-4 T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Exendin-4 is a pharmaceutical peptide used in the control of insulin secretion. Structural information on exendin-4 and related peptides especially on the level of quaternary structure is scarce. We present the first published association equilibria of exendin-4 directly measured by static and dynamic light scattering. We show that exendin-4 oligomerization is pH dependent and that these oligomers are of low compactness. We relate our experimental results to a structural hypothesis to describe molecular details of exendin-4 oligomers. Discussion of the validity of this hypothesis is based on NMR, circular dichroism and fluorescence spectroscopy, and light scattering data on exendin-4 and a set of exendin-4 derived peptides. The essential forces driving oligomerization of exendin-4 are helix–helix interactions and interactions of a conserved hydrophobic moiety. Our structural hypothesis suggests that key interactions of exendin-4 monomers in the experimentally supported trimer take place between a defined helical segment and a hydrophobic triangle constituted by the Phe22 residues of the three monomeric subunits. Our data rationalize that Val19 might function as an anchor in the N-terminus of the interacting helix-region and that Trp25 is partially shielded in the oligomer by C-terminal amino acids of the same monomer. Our structural hypothesis suggests that the Trp25 residues do not interact with each other, but with C-terminal Pro residues of their own monomers. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1161 KW - biophysics KW - diabetes KW - peptides KW - oligomerization KW - conformational change KW - molecular modeling KW - static and dynamic light scattering KW - spectroscopy Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-522081 SN - 1866-8372 IS - 9 ER - TY - GEN A1 - Eggert, Kai A1 - Rawel, Harshadrai Manilal A1 - Pawelzik, Elke T1 - In vitro degradation of wheat gluten fractions by Fusarium graminearum proteases T2 - Postprints der Universität Potsdam : Mathematisch Naturwissenschaftliche Reihe N2 - Fusarium spp. infection of cereal grain is a common problem, which leads to a dramatic loss of grain quality. The aim of the present study was to investigate the effect of Fusarium infection on the wheat storage protein gluten and its fractions, the gliadins and glutenins, in an in vitro model system. Gluten proteins were digested by F. graminearum proteases for 2, 4, 8 and 24 h, separated by Osborne fractionation and characterised by chromatographic (RP-HPLC) and electrophoretic analysis (SDS-Page). Gluten digestion by F. graminearum proteases showed in comparison with gliadins a preference for the glutenins whereas the HMW subfraction was at most affected. In comparison with a untreated control, the HMW subfraction was degraded of about 97% after 4 h incubation with Fusarium proteases. Separate digestion of gliadin and glutenin underlined the preference for HMW-GS. Analogue to the observed change in the gluten composition, the yield of the proteins extracted changed. A higher amount of glutenin fragments was found in the gliadin extraction solution after digestion and could mask a gliadin destruction at the same time. This observation can contribute to explain the frequently reported reduced glutenin amount parallel to an increase in gliadin quantity after Fusarium infection in grains. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 877 KW - gluten KW - gliadin and glutenin fractions KW - peptides KW - serine and trypsin protease Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-435102 SN - 1866-8372 IS - 877 SP - 697 EP - 705 ER - TY - JOUR A1 - Reyna-González, Emmanuel A1 - Schmid, Bianca A1 - Petras, Daniel A1 - Süssmuth, Roderich D. A1 - Dittmann, Elke T1 - Leader Peptide-Free In Vitro Reconstitution of Microviridin Biosynthesis Enables Design of Synthetic Protease-Targeted Libraries JF - Angewandte Chemie : a journal of the Gesellschaft Deutscher Chemiker ; International edition N2 - Microviridins are a family of ribosomally synthesized and post-translationally modified peptides with a highly unusual architecture featuring non-canonical lactone as well as lactam rings. Individual variants specifically inhibit different types of serine proteases. Here we have established an efficient in vitro reconstitution approach based on two ATP-grasp ligases that were constitutively activated using covalently attached leader peptides and a GNAT-type N-acetyltransferase. The method facilitates the efficient in vitro one-pot transformation of microviridin core peptides to mature microviridins. The engineering potential of the chemo-enzymatic technology was demonstrated for two synthetic peptide libraries that were used to screen and optimize microviridin variants targeting the serine proteases trypsin and subtilisin. Successive analysis of intermediates revealed distinct structure-activity relationships for respective target proteases. KW - biosynthesis KW - cyanobacteria KW - microviridins KW - natural products KW - peptides Y1 - 2016 U6 - https://doi.org/10.1002/anie.201604345 SN - 1433-7851 SN - 1521-3773 VL - 55 SP - 9398 EP - 9401 PB - Wiley-VCH CY - Weinheim ER - TY - THES A1 - López García, Patricia T1 - Coiled coils as mechanical building blocks T1 - Coiled Coils als mechanische Bausteine N2 - The natural abundance of Coiled Coil (CC) motifs in cytoskeleton and extracellular matrix proteins suggests that CCs play an important role as passive (structural) and active (regulatory) mechanical building blocks. CCs are self-assembled superhelical structures consisting of 2-7 α-helices. Self-assembly is driven by hydrophobic and ionic interactions, while the helix propensity of the individual helices contributes additional stability to the structure. As a direct result of this simple sequence-structure relationship, CCs serve as templates for protein design and sequences with a pre-defined thermodynamic stability have been synthesized de novo. Despite this quickly increasing knowledge and the vast number of possible CC applications, the mechanical function of CCs has been largely overlooked and little is known about how different CC design parameters determine the mechanical stability of CCs. Once available, this knowledge will open up new applications for CCs as nanomechanical building blocks, e.g. in biomaterials and nanobiotechnology. With the goal of shedding light on the sequence-structure-mechanics relationship of CCs, a well-characterized heterodimeric CC was utilized as a model system. The sequence of this model system was systematically modified to investigate how different design parameters affect the CC response when the force is applied to opposing termini in a shear geometry or separated in a zipper-like fashion from the same termini (unzip geometry). The force was applied using an atomic force microscope set-up and dynamic single-molecule force spectroscopy was performed to determine the rupture forces and energy landscape properties of the CC heterodimers under study. Using force as a denaturant, CC chain separation is initiated by helix uncoiling from the force application points. In the shear geometry, this allows uncoiling-assisted sliding parallel to the force vector or dissociation perpendicular to the force vector. Both competing processes involve the opening of stabilizing hydrophobic (and ionic) interactions. Also in the unzip geometry, helix uncoiling precedes the rupture of hydrophobic contacts. In a first series of experiments, the focus was placed on canonical modifications in the hydrophobic core and the helix propensity. Using the shear geometry, it was shown that both a reduced core packing and helix propensity lower the thermodynamic and mechanical stability of the CC; however, with different effects on the energy landscape of the system. A less tightly packed hydrophobic core increases the distance to the transition state, with only a small effect on the barrier height. This originates from a more dynamic and less tightly packed core, which provides more degrees of freedom to respond to the applied force in the direction of the force vector. In contrast, a reduced helix propensity decreases both the distance to the transition state and the barrier height. The helices are ‘easier’ to unfold and the remaining structure is less thermodynamically stable so that dissociation perpendicular to the force axis can occur at smaller deformations. Having elucidated how canonical sequence modifications influence CC mechanics, the pulling geometry was investigated in the next step. Using one and the same sequence, the force application points were exchanged and two different shear and one unzipping geometry were compared. It was shown that the pulling geometry determines the mechanical stability of the CC. Different rupture forces were observed in the different shear as well as in the unzipping geometries, suggesting that chain separation follows different pathways on the energy landscape. Whereas the difference between CC shearing and unzipping was anticipated and has also been observed for other biological structures, the observed difference for the two shear geometries was less expected. It can be explained with the structural asymmetry of the CC heterodimer. It is proposed that the direction of the α-helices, the different local helix propensities and the position of a polar asparagine in the hydrophobic core are responsible for the observed difference in the chain separation pathways. In combination, these factors are considered to influence the interplay between processes parallel and perpendicular to the force axis. To obtain more detailed insights into the role of helix stability, helical turns were reinforced locally using artificial constraints in the form of covalent and dynamic ‘staples’. A covalent staple bridges to adjacent helical turns, thus protecting them against uncoiling. The staple was inserted directly at the point of force application in one helix or in the same terminus of the other helix, which did not experience the force directly. It was shown that preventing helix uncoiling at the point of force application reduces the distance to the transition state while slightly increasing the barrier height. This confirms that helix uncoiling is critically important for CC chain separation. When inserted into the second helix, this stabilizing effect is transferred across the hydrophobic core and protects the force-loaded turns against uncoiling. If both helices were stapled, no additional increase in mechanical stability was observed. When replacing the covalent staple with a dynamic metal-coordination bond, a smaller decrease in the distance to the transition was observed, suggesting that the staple opens up while the CC is under load. Using fluorinated amino acids as another type of non-natural modification, it was investigated how the enhanced hydrophobicity and the altered packing at the interface influences CC mechanics. The fluorinated amino acid was inserted into one central heptad of one or both α-helices. It was shown that this substitution destabilized the CC thermodynamically and mechanically. Specifically, the barrier height was decreased and the distance to the transition state increased. This suggests that a possible stabilizing effect of the increased hydrophobicity is overruled by a disturbed packing, which originates from a bad fit of the fluorinated amino acid into the local environment. This in turn increases the flexibility at the interface, as also observed for the hydrophobic core substitution described above. In combination, this confirms that the arrangement of the hydrophobic side chains is an additional crucial factor determining the mechanical stability of CCs. In conclusion, this work shows that knowledge of the thermodynamic stability alone is not sufficient to predict the mechanical stability of CCs. It is the interplay between helix propensity and hydrophobic core packing that defines the sequence-structure-mechanics relationship. In combination, both parameters determine the relative contribution of processes parallel and perpendicular to the force axis, i.e. helix uncoiling and uncoiling-assisted sliding as well as dissociation. This new mechanistic knowledge provides insight into the mechanical function of CCs in tissues and opens up the road for designing CCs with pre-defined mechanical properties. The library of mechanically characterized CCs developed in this work is a powerful starting point for a wide spectrum of applications, ranging from molecular force sensors to mechanosensitive crosslinks in protein nanostructures and synthetic extracellular matrix mimics. N2 - Das „Coiled Coil“ (CC) Faltungsmotiv ist Bestandteil vieler Proteine im Zytoskelett und der extrazellulären Matrix. Es kann daher davon ausgegangen werden, dass CCs essentielle mechanische Bausteine darstellen, die sowohl passive (strukturelle) als auch aktive (regulatorische) Aufgaben erfüllen. CCs bestehen aus 2-7 α-helikalen Untereinheiten, die eine superhelikale Struktur formen. Die Faltung und Stabilität der Superhelix wird durch hydrophobe und ionische Wechselwirkungen bestimmt, sowie durch die Helixpropensität der einzelnen Aminosäuren. Auf der Grundlage dieser gut verstandenen Struktur-Funktionsbeziehungen werden CCs häufig als Vorlage für das de novo Proteindesign genutzt. Trotz stetig wachsender wissenschaftlicher Erkenntnisse und der mannigfaltigen Anwendungsmöglichkeiten von CCs, ist ihre mechanische Funktion noch weitestgehend unerforscht. Insbesondere ist der Zusammenhang zwischen der Aminosäuresequenz und der mechanischen Stabilität kaum bekannt. Dieses Wissen ist jedoch essentiell für die Anwendung von CCs als nanomechanische Bausteine. Um die mechanischen Struktur-Funktionsbeziehungen von CCs zu beleuchten, wurde ein gut charakterisiertes CC-Heterodimer als Modellsystem genutzt. Dessen Sequenz wurde systematisch modifiziert, um den Einfluss verschiedener Strukturparameter auf die mechanische Stabilität des CCs zu untersuchen. Mittels Rasterkraftmikroskop-basierter Einzelmolekülkraftspektroskopie wurden die Kraftangriffspunkte so platziert, dass das CC entweder geschert oder wie ein Reißverschluss geöffnet wurde („Unzip“-Geometrie). Dabei wurde die Kraft bestimmt, die zur Separation der beiden Helices benötigt wird. Diese sogenannte Abrisskraft wurde bei verschiedenen Ladungsraten gemessen, um Rückschlüsse auf die Energielandschaft der CCs zu ziehen. Die anliegende Kraft führt zunächst zur Entfaltung der Helix-Enden an den Kraftangriffspunkten. Diese partielle Entfaltung ermöglicht in der Scher-Geometrie zwei Mechanismen, die letztlich zur Separation der Helices führen: die Verschiebung der Helices entlang des Kraftvektors und die Dissoziation senkrecht zur angelegten Kraft. Auch in der „Unzip“-Geometrie geht die teilweise Entfaltung der Dissoziation voraus. Zunächst wurde der Einfluss von hydrophoben Wechselwirkungen im Kern des CCs sowie der Helixpropensität systematisch untersucht. In der verwendeten Scher-Geometrie führten entsprechende Aminosäuremodifikationen zu einer Änderung der Abrisskraft des CCs, wobei spezifische Unterschiede in der Energielandschaft festzustellen sind. Weniger dicht gepackte hydrophobe Wechselwirkungen verlängern hauptsächlich den Abstand zum Übergangszustand, da sie die Freiheitsgrade des Entfaltungspfades erhöhen. Eine verringerte Helixpropensität verringert sowohl die Aktivierungsenergie als auch den Abstand zum Übergangszustand. Die niedrige thermodynamische Stabilität dieser Modifikation führt dazu, dass weniger Kraft angewandt werden muss, um die Dissoziation der Helices senkrecht zum Kraftvektor zu erreichen. Mit diesem Wissen über den Einfluss der Helixpropensität und der hydrophoben Wechselwirkungen, wurde anschließend die mechanische Entfaltung in zwei verschiedenen Scher-Geometrien, sowie der „Unzip“-Geometrie untersucht. Dazu wurde jeweils die gleiche Sequenz verwendet, wobei nur die Kraftangriffspunkte modifiziert wurden. Die Ergebnisse zeigen, dass die Positionierung der Kraftangriffspunkte essentiell für die gemessene mechanische Stabilität des CC ist. Wie auch in anderen biologischen Strukturen zu beobachten, besteht ein Unterschied zwischen Scher- und „Unzip“-Geometrie. Jedoch weist das CC auch in den beiden Scher-Geometrien Unterschiede in der Stabilität auf. Dies ist auf eine Asymmetrie der ansonsten hochrepetitiven Sequenz zurückzuführen. Die Rolle der Helixstabilität wurde durch die lokale Stabilisierung von Helixwindungen mit kovalenten und dynamischen molekularen Klammern genauer erforscht. Die Klammern verknüpfen zwei benachbarte Windungen und stabilisieren diese so gegen die mechanische Entfaltung. Die kovalente Klammer wurde entweder direkt am Kraftangriffspunkt eingefügt oder in der Partnerhelix, an der die Kraft nicht direkt angreift. Es wurde gezeigt, dass die Klammern die mechanische Stabilität des CCs erhöhen. Dem liegen eine Verringerung des Abstands zum Übergangszustand und eine leichte Erhöhung der Energiebarriere zu Grunde. Helix-stabilisierende Effekte können durch die hydrophoben Wechselwirkungen auf die Partnerhelix übertragen werden. Das Klammern beider Helices führte nicht zu einer weiteren Erhöhung der mechanischen Stabilität. Bei Einfügen einer dynamischen Klammer direkt am Kraftangriffspunkt fällt die Verringerung des Abstands zum Übergangszustand kleiner aus. Dies ist auf das Öffnen der reversiblen Klammer bei Krafteinwirkung zurückzuführen. Auch die Rolle der hydrophoben Wechselwirkungen wurde unter Verwendung einer nicht-natürlichen Modifikation detaillierter untersucht. Dazu wurde eine fluorinierte Aminosäure im zentralen Teil des CCs eingebaut. Die fluorinierte Aminosäure ist hydrophober als die Ursprüngliche und verändert die Packung der Seitenketten im hydrophoben Kern. Die Anwesenheit der fluorinierten Aminosäure in einer der beiden Helices führte zu einer Erniedrigung der Aktivierungsenergie sowie zu einer gleichzeitigen Erhöhung des Abstandes zum Übergangszustand. Dies zeigt, dass die fluorinierte Aminosäure in erster Linie die Packung der hydrophoben Aminosäuren stört, während der Einfluss des hydrophoben Effekts ehr gering ist. Die fluorinierte Aminosäure kann nicht gut in die lokale Umgebung der anderen Aminosäuren integriert werden und zeigt so, dass die Anordnung und Wechselwirkung der hydrophoben Aminosäuren im Kern essentiell für die mechanische Stabilität von CCs ist. Zusammenfassend zeigt diese Arbeit, dass allein auf Grundlage der thermodynamischen Stabilität nicht auf die mechanische Stabilität von CCs geschlossen werden kann. Das Zusammenspiel zwischen Helixstabilität und hydrophoben Wechselwirkungen ist maßgebend um die Zusammenhänge zwischen Sequenz, Struktur und mechanischer Stabilität von CCs zu verstehen. Beide Faktoren tragen zu den Entfaltungsmechanismen parallel und senkrecht zur Kraftrichtung bei. Diese neuen mechanistischen Einblicke in die sequenzabhängige mechanische Stabilität von CCs ermöglichen die Entwicklung von CCs mit maßgeschneiderten mechanischen Eigenschaften. Die hier charakterisierte CC-Bibliothek ist ein hervorragender Ausgangspunkt für ein breites Spektrum an potentiellen Anwendungen, von molekularen Kraftsensoren bis zu mechanosensitiven Bausteinen für Proteinnanostrukturen und künstlichen extrazellulären Matrices. KW - biochemistry KW - peptides KW - coiled coils KW - mechanics KW - single-molecule force spectroscopy KW - Biochemie KW - Peptide KW - Coiled coils KW - mechanische Stabilität KW - Einzelmolekülkraftspektroskopie Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-429568 ER - TY - JOUR A1 - Haralampiev, Ivan A1 - Mertens, Monique A1 - Schwarzer, Roland A1 - Herrmann, Andreas A1 - Volkmer, Rudolf A1 - Wessig, Pablo A1 - Mueller, Peter T1 - Recruitment of SH-Containing peptides to lipid and biological membranes through the use of a palmitic acid functionalized with a Maleimide Group JF - Angewandte Chemie : a journal of the Gesellschaft Deutscher Chemiker ; International edition N2 - This study presents a novel and easily applicable approach to recruit sulfhydryl-containing biomolecules to membranes by using a palmitic acid which is functionalized with a maleimide group. Notably, this strategy can also be employed with preformed (biological) membranes. The applicability of the assay is demonstrated by characterizing the binding of a Rhodamine-labeled peptide to lipid and cellular membranes using methods of fluorescence spectroscopy, lifetime measurement, and microscopy. Our approach offers new possibilities for preparing biologically active liposomes and manipulating living cells. KW - liposomes KW - maleimide KW - membranes KW - palmitic acid KW - palmitoylation KW - peptides Y1 - 2015 U6 - https://doi.org/10.1002/anie.201408089 SN - 1433-7851 SN - 1521-3773 VL - 54 IS - 1 SP - 323 EP - 326 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Secker, Christian A1 - Brosnan, Sarah M. A1 - Luxenhofer, Robert A1 - Schlaad, Helmut T1 - Poly(alpha-Peptoid)s Revisited: Synthesis, Properties, and Use as Biomaterial JF - Macromolecular bioscience N2 - Polypeptoids have been of great interest in the polymer science community since the early half of the last century; however, they had been basically forgotten materials until the last decades in which they have enjoyed an exciting revival. In this mini-review, we focus on the recent developments in polypeptoid chemistry, with particular focus on polymers synthesized by the ring-opening polymerization (ROP) of amino acid N-carboxyanhydrides (NCAs). Specifically, we will review traditional monomer synthesis (such as Leuchs, Katchalski, and Kricheldorf) and recent advances in polymerization methods to yield both linear, cyclic, and functional polymers, solution and bulk thermal properties, and preliminary results on the use of polypeptoids as biomaterials (i.e immunogenicity, biodistribution, degradability, and drug delivery). KW - amino acid N-carboxyanhydride (NCA) KW - biomaterials KW - peptides KW - properties KW - ring-opening polymerization Y1 - 2015 U6 - https://doi.org/10.1002/mabi.201500023 SN - 1616-5187 SN - 1616-5195 VL - 15 IS - 7 SP - 881 EP - 891 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Federico, Stefania A1 - Pierce, Benjamin F. A1 - Piluso, Susanna A1 - Wischke, Christian A1 - Lendlein, Andreas A1 - Neffe, Axel T. T1 - Design of Decorin-Based Peptides That Bind to CollagenI and their Potential as Adhesion Moieties in Biomaterials JF - Angewandte Chemie : a journal of the Gesellschaft Deutscher Chemiker ; International edition N2 - Mimicking the binding epitopes of protein-protein interactions by using small peptides is important for generating modular biomimetic systems. A strategy is described for the design of such bioactive peptides without accessible structural data for the targeted interaction, and the effect of incorporating such adhesion peptides in complex biomaterial systems is demonstrated. The highly repetitive structure of decorin was analyzed to identify peptides that are representative of the inner and outer surface, and it was shown that only peptides based on the inner surface of decorin bind to collagen. The peptide with the highest binding affinity for collagenI, LHERHLNNN, served to slow down the diffusion of a conjugated dye in a collagen gel, while its dimer could physically crosslink collagen, thereby enhancing the elastic modulus of the gel by one order of magnitude. These results show the potential of the identified peptides for the design of biomaterials for applications in regenerative medicine. KW - biomaterials KW - collagen KW - gels KW - peptides KW - protein-protein interactions Y1 - 2015 U6 - https://doi.org/10.1002/anie.201505227 SN - 1433-7851 SN - 1521-3773 VL - 54 IS - 37 SP - 10980 EP - 10984 PB - Wiley-VCH CY - Weinheim ER -