TY - THES A1 - Grochowska, Marta T1 - Ökonomische, soziale und räumliche Folgen der saisonalen Arbeitsmigration im Herkunftsgebiet : am Beispiel der Region Konin (Polen) T1 - Economic, social and spatial consequences of seasonal migration in the place of origin – case study : Konin (Poland) N2 - Die vorliegende Arbeit basiert auf Forschungen in den Jahren 2007-2009. Sie betrachtet die saisonale Arbeitsmigration aus der polnischen Region Konin, wo die Arbeitsmigration aus ökonomischen Gründen, wie auch in ähnlich strukturierten Gebieten Polens, eine lange Tradition hat, die bis ins 19. Jahrhundert zurückgeht. Sie wird die saisonale Migration ins Ausland mit den ökonomischen, sozialen und räumlichen Auswirkungen aus der Perspektive des Einzelnen und seiner unmittelbaren Umgebung, aber auch der Gesellschaft und Herkunftsgebiet der Migranten betrachtet. N2 - Mobility for economic reasons is treated in science primarily from the perspective of permanent resettlement. However, other varieties of migration are more and more often studied. This paper deals with the seasonal migration for economic reasons, which is an important area of migration undertaken for economic reasons. Seasonal migration, which leads to crossing the country borders, in the literature is called the Transnational Migration. Unlike international migration, which is usually connected with a permanent settling in the target area, the concept of Transnational migration describes the situation, in which migrants return to their place of origin and do not give it up as their main residence, but every time they travel to another country to get employed. As a research area of this work, the Konin region was chosen, because - in comparison with other regions in Poland - the phenomenon of a very high level of seasonal migration was observed there. Seasonal labor migration is a long tradition that goes back to 19. century here and in other Polish regions with similar structure. From the results of conducted in 2007−2009 research, some general facts can be drawn. Due to the seasonal work abroad, a seasonal migrant can increase their and their family’s standard of living. If the cost of living in the place of seasonal work is higher than in the place of origin, the profit of such visits is obviously higher if the family of a seasonal worker remains in the place of origin. This leads to the geographic division bet389 ween the place of working and place of permanent residence. Higher wages can be determined at the level of benefits to both personal and societal level. On the other hand, both forprofit workers and society in dealing with this phenomenon, costs cannot be ignored. This paper considers the pros and cons of seasonal paid work, both from the perspective of individuals and their surroundings, and the consequences for society and region of origin of the employee. This paper is considering economic, social and spatial consequences, each time at the macro and micro levels. The study was based primarily on interviews with several respondents and experts in the subject of Polish and German migrations for profit. T3 - Potsdamer Geographische Forschungen - 29 KW - saisonale Arbeitsmigration KW - transnationale Migration KW - Transnationalismus KW - Polen KW - Region Konin KW - Sachsengängerei KW - seasonal labor migration KW - transnational migration KW - transnationalism KW - Poland KW - Konin region KW - Sachsengängerei Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-49649 SN - 978-3-86956-137-0 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - THES A1 - Althaus, Tilmann T1 - Zur Geochemie der Edelgase ultramafischer Mantelxenolithe und Alkalibasalte der Persani-Berge, Transsilvanien, Rumänien Y1 - 1999 CY - Potsdam ER - TY - THES A1 - Nada, Wael Mohamed Abdel-Rahman T1 - Wood compost process engineering, properties and its impact on extreme soil characteristics N2 - The landfilling of biodegradable waste is proven to contribute to environmental degradation. Much wood and lumber is discharged as waste from the cleared fields. These woody wastes are subsequently disposed of by burning. However, it would be preferable to dispose of them without combustion to avoid the release of carbon dioxide, one of the critical greenhouse gases. Instead of burning these woody wastes, we should recycle them as future resources. One solution to this problem is to make compost from the waste. Compost use in agriculture is increasing as both an alternative to landfilling for the management of biodegradable waste, as well as means of increasing or preserving soil organic matter. This research aimed to contribute to the identification of a system for managing the production and utilization of wood waste (Quercus rubra and Pinus sylvestris) compost for sustainable agriculture, with particular regards to carbon dioxide produced from both compost and combustion of wood. Compost of wood was implemented in two consecutive trials. The first was carried out in greenhouse experiment in 4 liter pot of Quercus rubra and Pinus sylvestris (QR and PS) moisted by compost and tap water and infected by tiger worm (Eisenia fetida, EF) and European night crawlers (Dendrobaena veneta, DV) at different mixed ratios with lake mud (LM). The second was conducted in greenhouse experiment in 40 liter pot of the successful wood and worm from the first compost trial (QR and EF respectively). The tested wood (QR) was mixed separately by lake mud and horse manure and irrigated by compost and tap water. The final product, successful wood compost (QR) produced from the first trial (4 liter pot) was utilized in different mixed ratios with coal mine tailings (tertiary sand) in greenhouse pot trial to study his effects on improving soil physical and chemical properties and some plant growth parameters of RSM 7.2.1 grass. The wood compost produced from the second compost experiment (40 liter pot) and other artificial component named Arkadolith® were used as soil amelioration in field experiments of different selected sites with extremely unsuitable characteristics (tertiary and quaternary sand in Lusatia lignite region, Germany). The soil in each site was sowed by RSM 7.2.1 and autochthonous grasses. Also, some vermicompost samples were selected to study its thermal stability which compared with a soil sample (Niedermoorgleys) by using thermogravimetric analysis technique. Further investigation was achieved to evaluate the effect of charcoal as a source of carbon on vermicompost stability. Moreover some selected vermicompost samples were used to examine its microstructure under scanning electron microscope which compared also with the same soil used in thermal analysis. The obtained results under all studied experiments can be arranged as follow: First compost trial, Cumulative amount of carbon dioxide produced during composting period was lower than that evolved by combustion of wood. The results showed composting of wood can reduce the emitted CO2 up to 50 % when compared with the amount of CO2 produced from combustion of wood. The effect of different studied factors on different studied parameters show that, QR wood compost have more responsive to decomposition processes and humification rate in comparison with PS wood compost. Under different infection worms, Eisenia fetida (EF) was better than Dendrobaena veneta (DV) in biodegradation rate. Compost water has had a better impact of tap water in all studied decomposition parameters. For example, The compost content of OM and total OC was decreased with the increase of the decomposition period in the treatments of compost water and EF worm, where this decrease was higher at mixed ratio of 1:3 (wood: mud, w/w). The total content of N in the final products takes reversible trend regarding to OM and C content. The high content of N was found in QR wood compost moisted by compost water and infected by EF worm. The content of both macro-and micro-nutrients was clearly positive affected by the studied factors. The content of these nutrients in QR wood compost was higher than that found in the compost of PS wood. Second compost trial, The observed data show that, the amount of CO2 produced by composting was lower than that evolved by combustion of wood. Composting of wood reduced CO2 emission up to 40 % of the combustion wood CO2. Cumulative amount of CO2 produced from wood compost treated by horse manure was higher than that fount in the other treated by LM. The compost of wood treated by horse manure has had a high decomposition rate in comparison with that treated by lake mud. The treatments left without worms during all composting period and moisted by compost water have a responsive effects but it was lower than that infected by worms. Total and available contents of N, P, K, Mg, Zn, and Cu in the compost treated by HM were higher than that found in compost treated by LM. The other nutrients (Ca, Fe, Cu, and Mn) take reversible trend, which it was higher in LM than HM treatments. Thermal and microstructure analysis, The selected vermicompost samples from both first and second compost experiments showed, up to 200° C temperature the mass loss was due to free water and bound water (It was in vermicompost samples higher than soil sample). Mass loss from 200 to 550° C is due to easily oxidizable organic forms and it was higher in vermicompost than soil. In this stage the soil OM seems to be more stable than vermicompost which can be explained by a more intensive bond between the organic and inorganic components. At higher temperatures (T> 550° C) no significant detectable was appeared of soil organic matter. In contrast, the vermicompost treatments showed a high proportion of stable groups, especially aromatic compounds. These statements seem to be importance particularly for the practical application of the wood compost in terms of their long-term effect in the soil. The application of charcoal, showed no additional stabilizing effect of vermicompost. Also, the data show that, vermicompost structure characterized with high homogeneity and ratio of surface area to volume compared to those in soil structure. First plant trials (greenhouse), Different compost mixed ratios had positive impact on different extreme soil physiochemical properties. At the end of experiment (42 days) compost increased soil water holding capacity, decreased soil bulk and particle density and increased total porosity. The used wood compost modified soil buffering capacity and soil acidity. The availability of soil macro and micro nutrients were increased after adding wood compost. The wood compost had a positive effect in some growth parameters like fresh and dry matter yield of the selected grass. High dry matter yield and nutrients uptake was achieved with higher rates of compost application (25.0% > 12.5% > 3.0% > 0.0 %, w/w). Second plant trials (field experiment), Regarding to the effect of wood compost (QR) and Arkadolith® component on tertiary and quaternary sand, at the end of grown season (6 month) most soil and plant characteristics of tertiary sand were improved and it was better than that in quaternary sand. This trend reveals to, physical and chemical properties of tertiary sand was better than that in quaternary sand, like organic matter content, CEC, WHC, TOC, available nutrients. In the both sites, the effects of different type of soil conditioners arranged as follow: the treatments treated with wood compost is the better followed by the other treated with both wood compost and Arkadolith. Wood compost increased soil pH, CEC, soil buffering capacity, OM content, and soil WHC in comparison with Arkadolith which make a small improvement of these properties in both sites. Finally, Different growth parameters (height, covering, fresh and dry matter yield) of the used grasses were clearly positive affected by wood compost, with the highest production inherent to the treatments treated by the high amount of wood compost. N2 - Entsprechend der Zielstellung wurden zunächst verschiedene Varianten der Kompostierung von Holzsubstanz getestet, um eine optimale Technologie, die auch für Entwicklungsländer realisierbar ist, herauszufinden. Hierzu sind in Pflanztöpfe Holzspäne (Woodchips) von zwei verschieden Holzarten (Laub- und Nadelholz) gefüllt und mit verschiedenen natürlichen Stickstoffquellen gemischt worden. Diese Ansätze wurden regelmäßig mit Kompostwasser appliziert. Nach vier Wochen sind zwei verschiedene Wurmarten (Dendrobaena veneta und Eisenia fetida) hinzugegeben worden. Die Feuchthaltung erfolgte ab diesem Zeitpunkt durch Frischwasser. Die qualitativ beste Versuchsvariante ist im nächsten Schritt mit weiteren natürlichen Stickstoffquellen, die in Entwicklungsländern zur Verfügung gestellt werden könnten, getestet worden. Von allen Kompostvarianten sind im Labor eine Vielzahl von bodenphysikalischen (z.B. Dichte, Wasserhaltekapazität) und bodenchemischen Zustandsgrößen (z.B. Elektrische Leitfähigkeit, Totalgehalte biophiler Elemente, Bodenreaktion, organische Substanzgehalte, Kationenaustauschkapazität) bestimmt worden. Die Wiederum qualitativ beste Mischung ist in einer weiteren Versuchsreihe in verschiedenen Mengenverhältnissen mit tertiärerem Abraumsand des Braunkohlebergbaus gemischt worden. In diese Versuchsmischungen wurde die Grasmischung RSM 7.2.1 eingesät und regelmäßig bewässert sowie die Wuchshöhe gemessen. Nach 42 Tagen wurden das Gras geerntet und die biometrischen Parameter, die Nährstoffgehalte (pflanzenverfügbare Fraktionen), die Bodenreaktion, die effektive bzw. potentielle Kationenaustauschkapazität sowie die Pufferkapazitäten der Mischsubstrate bestimmt. Die nächsten Versuchsvarianten sind als Feldversuche in der Niederlausitz durchgeführt worden. Für ihre Realisierung wurde als weiterer Zuschlagsstoff Arkadolith® zugemischt. Die Plotflächen sind sowohl auf Abraumsanden des Tertiärs als auch Quartärs angelegt worden. In jeweils eine Subvariante ist RSM 7.2.1, in die andere eine autochthone Grasmischung eingesät worden. Diese Experimente wurden nach 6 Monaten beendet, die Bestimmung aller Parameter erfolgte in gleicher Weise wie bei den Gewächshausversuchen. Auf Basis aller Versuchsreihen konnten die besten Kompostqualitäten und ihre optimalen Herstellungsvarianten ermittelt werden. Eine weitere Aufgabe war es zu untersuchen, wie im Vergleich zur Verbrennung von Holzmasse die CO2-Emission in die Atmosphäre durch Holzkompostierung verringert werden kann. Hierzu wurde während der verschiedenen Kompostierungsvarianten die CO2-Freisetzung gemessen. Im Vergleich dazu ist jeweils die gleiche Masse an Holzsubstanz verbrannt worden. Die Ergebnisse zeigten, dass im Vergleich zu der thermischen Verwertung von Holsubstanz die CO2-Emission bis zu 50 % verringert werden kann. Dem Boden kann darüber hinaus energiereiche organische Substanz zugeführt werden, die eine Entwicklung der Bodenorganismen ermöglicht. Ein weiteres Experiment zielte darauf ab, die Stabilität der Holzkomposte zu bestimmen. Darüber hinaus sollte untersucht werden, ob durch die Zufuhr von pyrogenem Kohlenstoff eine Vergrößerung der Stabilität zu erreichen ist. Diese Untersuchungen wurden mit Hilfe der Thermogravimetrie vorgenommen. Alle wichtigen Kompostierungsvarianten sind sowohl mit verschiedenen Zusatzmengen als auch ohne Zusatz von pyrogenem Kohlenstoff vermessen worden. Als Vergleichssubstanz diente der Oberboden eines Niedermoorgleys, der naturgemäß einen relativ hohen Anteil an organischer Substanz aufweist. Die Ergebnisse zeigten, dass im Bereich niedriger Temperaturen die Wasserbindung im Naturboden fester ist. In der Fraktion der oxidierbaren organischen Substanz, im mittleren Temperaturbereich gemessen, ist die natürliche Bodensubstanz ebenfalls stabiler, was auf eine intensivere Bindung zwischen den organischen und anorganischen Bestandteilen, also auf stabilere organisch-mineralische Komplexe, schlussfolgern lässt. Im Bereich höherer Temperaturen (T> 550° C) waren im Naturboden keine nennenswerten organischen Bestandteile mehr nachweisbar. Hingegen wiesen die Kompostvarianten einen hohen Anteil stabiler Fraktionen, vor allem aromatische Verbindungen, auf. Diese Aussagen erscheinen vor allem für die praktische Anwendung der Holzkomposte in Hinblick auf ihre Langzeitwirkung bedeutsam. Der Zusatz von pyrogenem Kohlenstoff zeigte keine zusätzliche Stabilisierungswirkung. T2 - Holzkompostverfahrenstechnik, Eigenschaften und ihre Auswirkungen auf die extremen Bodeneigenschaften KW - Holzkompost KW - Kohlendioxid KW - Eisenia fetida KW - Dendrobaena veneta KW - Kohlengrubenabraum KW - wood compost KW - carbon dioxide KW - Eisenia fetida KW - Dendrobaena veneta KW - coal mine waste Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-51046 ER - TY - THES A1 - Siegmund, Nicole T1 - Wind driven soil particle uptake Quantifying drivers of wind erosion across the particle size spectrum T1 - Partikelaufwirbelung durch Wind - Über die Quantifizierung von Winderosion über das ganze Partikel-Größenspektrum N2 - Among the multitude of geomorphological processes, aeolian shaping processes are of special character, Pedogenic dust is one of the most important sources of atmospheric aerosols and therefore regarded as a key player for atmospheric processes. Soil dust emissions, being complex in composition and properties, influence atmospheric processes and air quality and has impacts on other ecosystems. In this because even though their immediate impact can be considered low (exceptions exist), their constant and large-scale force makes them a powerful player in the earth system. dissertation, we unravel a novel scientific understanding of this complex system based on a holistic dataset acquired during a series of field experiments on arable land in La Pampa, Argentina. The field experiments as well as the generated data provide information about topography, various soil parameters, the atmospheric dynamics in the very lower atmosphere (4m height) as well as measurements regarding aeolian particle movement across a wide range of particle size classes between 0.2μm up to the coarse sand. The investigations focus on three topics: (a) the effects of low-scale landscape structures on aeolian transport processes of the coarse particle fraction, (b) the horizontal and vertical fluxes of the very fine particles and (c) the impact of wind gusts on particle emissions. Among other considerations presented in this thesis, it could in particular be shown, that even though the small-scale topology does have a clear impact on erosion and deposition patterns, also physical soil parameters need to be taken into account for a robust statistical modelling of the latter. Furthermore, specifically the vertical fluxes of particulate matter have different characteristics for the particle size classes. Finally, a novel statistical measure was introduced to quantify the impact of wind gusts on the particle uptake and its application on the provided data set. The aforementioned measure shows significantly increased particle concentrations during points in time defined as gust event. With its holistic approach, this thesis further contributes to the fundamental understanding of how atmosphere and pedosphere are intertwined and affect each other. N2 - Unter der Vielzahl geomorphologischer Prozesse nehmen äolische Formgebungsprozesse eine besondere Stellung ein, denn obwohl ihre unmittelbaren Auswirkungen als gering einzuschätzen sind (Ausnahmen existieren), sind sie aufgrund ihrer konstanten und großen Kraft ein mächtiger Akteur im Erdsystem. Pedogener Staub ist eine der wichtigsten Quellen atmosphärischer Aerosole und kann daher als Schlüsselfaktor für atmosphärische Prozesse angesehen werden. Bodenstaubemissionen, die in Zusammensetzung und Eigenschaften komplex sind, beeinflussen atmosphärische Prozesse und Luftqualität und haben Auswirkungen auf andere Ökosysteme. Um zum wissenschaftlichen Verständnis dieses komplexen Systems beizutragen, dokumentiert diese Arbeit eine Reihe von Veröffentlichungen, die alle auf einem ganzheitlichen Datensatz basieren, die während einer Reihe von Feldexperimenten auf Ackerland in La Pampa, Argentinien, gewonnen wurden. Die Feldexperimente sowie die generierten Daten liefern Informationen über Topographie, verschiedene Bodenparameter, die atmosphärische Dynamik in der unteren Atmosphäre (4 m Höhe) sowie Messungen zur äolischen Partikelbewegung über einen weiten Bereich von Partikelgrößenklassen zwischen 0,2μm und groben Sand. Die Untersuchungen konzentrieren sich auf drei Themen: Die Auswirkungen kleinräumiger Landschaftsstrukturen auf äolische Transportprozesse der groben Partikelfraktion, die horizontalen und vertikalen Strömungen der sehr feinen Partikel und der Einfluss von Windböen auf die Partikelemissionen. Neben anderen in dieser Arbeit vorgestellten Überlegungen konnte insbesondere gezeigt werden, dass, obwohl die kleinräumige Topologie einen deutlichen Einfluss auf Erosions- und Ablagerungsmuster hat, auch physikalische Bodenparameter für eine robuste statistische Modellierung berücksichtigt werden müssen. Darüber hinaus weisen speziell die vertikalen Feinstaubflüsse unterschiedliche Eigenschaften für die Partikelgrößenklassen auf. Schließlich wurde ein neuartiges statistisches Maß eingeführt, um den Einfluss von Windböen auf die Partikelkonzentration der Luft zu quantifizieren, und seine Anwendung auf den bereitgestellten Datensatz zeigt signifikant erhöhte Partikelkonzentrationen zu Zeitpunkten, die als Böen definiert wurden. Mit ihrem ganzheitlichen Ansatz trägt diese Arbeit weiter zum grundlegenden Verständnis bei, wie Atmosphäre und Pedosphäre miteinander verflochten sind und sich gegenseitig beeinflussen. KW - Winderosion KW - winderosion KW - PM10, PM2, PM1 KW - Horizontal flux KW - horizontaler Fluss KW - Vertical flux KW - vertikaler Fluss KW - Argentina KW - Argentinien KW - wind gusts KW - Windböen Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-574897 ER - TY - THES A1 - Fuchs, Sven T1 - Well-log based determination of rock thermal conductivity in the North German Basin T1 - Bestimmung der Gesteinswärmeleitfähigkeit aus geophysikalischen Bohrlochmessungen im Norddeutschen Becken N2 - In sedimentary basins, rock thermal conductivity can vary both laterally and vertically, thus altering the basin’s thermal structure locally and regionally. Knowledge of the thermal conductivity of geological formations and its spatial variations is essential, not only for quantifying basin evolution and hydrocarbon maturation processes, but also for understanding geothermal conditions in a geological setting. In conjunction with the temperature gradient, thermal conductivity represents the basic input parameter for the determination of the heat-flow density; which, in turn, is applied as a major input parameter in thermal modeling at different scales. Drill-core samples, which are necessary to determine thermal properties by laboratory measurements, are rarely available and often limited to previously explored reservoir formations. Thus, thermal conductivities of Mesozoic rocks in the North German Basin (NGB) are largely unknown. In contrast, geophysical borehole measurements are often available for the entire drilled sequence. Therefore, prediction equations to determine thermal conductivity based on well-log data are desirable. In this study rock thermal conductivity was investigated on different scales by (1) providing thermal-conductivity measurements on Mesozoic rocks, (2) evaluating and improving commonly applied mixing models which were used to estimate matrix and pore-filled rock thermal conductivities, and (3) developing new well-log based equations to predict thermal conductivity in boreholes without core control. Laboratory measurements are performed on sedimentary rock of major geothermal reservoirs in the Northeast German Basin (NEGB) (Aalenian, Rhaethian-Liassic, Stuttgart Fm., and Middle Buntsandstein). Samples are obtained from eight deep geothermal wells that approach depths of up to 2,500 m. Bulk thermal conductivities of Mesozoic sandstones range between 2.1 and 3.9 W/(m∙K), while matrix thermal conductivity ranges between 3.4 and 7.4 W/(m∙K). Local heat flow for the Stralsund location averages 76 mW/m², which is in good agreement to values reported previously for the NEGB. For the first time, in-situ bulk thermal conductivity is indirectly calculated for entire borehole profiles in the NEGB using the determined surface heat flow and measured temperature data. Average bulk thermal conductivity, derived for geological formations within the Mesozoic section, ranges between 1.5 and 3.1 W/(m∙K). The measurement of both dry- and water-saturated thermal conductivities allow further evaluation of different two-component mixing models which are often applied in geothermal calculations (e.g., arithmetic mean, geometric mean, harmonic mean, Hashin-Shtrikman mean, and effective-medium theory mean). It is found that the geometric-mean model shows the best correlation between calculated and measured bulk thermal conductivity. However, by applying new model-dependent correction, equations the quality of fit could be significantly improved and the error diffusion of each model reduced. The ‘corrected’ geometric mean provides the most satisfying results and constitutes a universally applicable model for sedimentary rocks. Furthermore, lithotype-specific and model-independent conversion equations are developed permitting a calculation of water-saturated thermal conductivity from dry-measured thermal conductivity and porosity within an error range of 5 to 10%. The limited availability of core samples and the expensive core-based laboratory measurements make it worthwhile to use petrophysical well logs to determine thermal conductivity for sedimentary rocks. The approach followed in this study is based on the detailed analyses of the relationships between thermal conductivity of rock-forming minerals, which are most abundant in sedimentary rocks, and the properties measured by standard logging tools. By using multivariate statistics separately for clastic, carbonate and evaporite rocks, the findings from these analyses allow the development of prediction equations from large artificial data sets that predict matrix thermal conductivity within an error of 4 to 11%. These equations are validated successfully on a comprehensive subsurface data set from the NGB. In comparison to the application of earlier published approaches formation-dependent developed for certain areas, the new developed equations show a significant error reduction of up to 50%. These results are used to infer rock thermal conductivity for entire borehole profiles. By inversion of corrected in-situ thermal-conductivity profiles, temperature profiles are calculated and compared to measured high-precision temperature logs. The resulting uncertainty in temperature prediction averages < 5%, which reveals the excellent temperature prediction capabilities using the presented approach. In conclusion, data and methods are provided to achieve a much more detailed parameterization of thermal models. N2 - Die thermische Modellierung des geologischen Untergrundes ist ein wichtiges Werkzeug bei der Erkundung und Bewertung tiefliegender Ressourcen sedimentärer Becken (e.g., Kohlenwasserstoffe, Wärme). Die laterale und vertikale Temperaturverteilung im Untergrund wird, neben der Wärmestromdichte und der radiogenen Wärmeproduktion, hauptsächlich durch die Wärmeleitfähigkeit (WLF) der abgelagerten Gesteinsschichten bestimmt. Diese Parameter stellen die wesentlichen Eingangsgrößen für thermische Modelle dar. Die vorliegende Dissertation befasst sich mit der Bestimmung der Gesteins-WLF auf verschiedenen Skalen. Dies umfasst (1) laborative WLF-Messungen an mesozoischen Bohrkernproben, (2) die Evaluierung und Verbesserung der Prognosefähigkeit von Mischgesetzten zur Berechnung von Matrix- und Gesamt-WLF sedimentärer Gesteine, sowie (3) die Entwicklung neuer Prognosegleichungen unter Nutzung bohrlochgeophysikalischer Messungen und multivariater Analysemethoden im NGB. Im Nordostdeutschen Becken (NEGB) wurden für die wichtigsten geothermischen Reservoire des Mesozoikums (Aalen, Rhät-Lias-Komplex, Stuttgart Formation, Mittlerer Buntsandstein) Bohrkerne geothermischer Tiefbohrungen (bis 2.500 m Tiefe) auf Ihre thermischen und petrophysikalischen Eigenschaften hin untersucht. Die WLF mesozoischer Sandsteine schwankt im Mittel zwischen 2,1 und 3,9 W/(m∙K), die WLF der Gesteinsmatrix hingegen im Mittel zwischen 3,4 und 7,4 W/(m∙K). Neu berechnete Werte zur Oberflächenwärmestromdichte (e.g., 76 mW/m², Stralsund) stehen im Einklang mit den Ergebnissen früherer Studien im NEGB. Erstmals im NDB wurde für das mesozoisch/känozoischen Intervall am Standort Stralsund ein in-situ WLF-Profil berechnet. In-situ Formations-WLF, für als potentielle Modelschichten interessante, stratigraphische Intervalle, variieren im Mittel zwischen 1,5 und 3,1 W/(m∙K) und bilden eine gute Grundlage für kleinskalige (lokale) thermische Modelle. Auf Grund der in aller Regel nur eingeschränkt verfügbaren Bohrkernproben sowie des hohen laborativen Aufwandes zur Bestimmung der WLF waren alternative Methoden gesucht. Die Auswertung petrophysikalischer Bohrlochmessungen mittels mathematischer-statistischer Methoden stellt einen lang genutzten und erprobten Ansatz dar, welcher in seiner Anwendbarkeit jedoch auf die aufgeschlossenen Gesteinsbereiche (Genese, Geologie, Stratigraphie, etc.) beschränkt ist. Daher wurde ein leicht modifizierter Ansatz entwickelt. Die thermophysikalischen Eigenschaften der 15 wichtigsten gesteinsbildenden Minerale (in Sedimentgesteinen) wurden statistisch analysiert und aus variablen Mischungen dieser Basisminerale ein umfangreicher, synthetischer Datensatz generiert. Dieser wurde mittels multivariater Statistik bearbeitet, in dessen Ergebnis Regressionsgleichungen zur Prognose der Matrix-WLF für drei Gesteinsgruppen (klastisch, karbonatisch, evaporitisch) abgeleitet wurden. In einem zweiten Schritt wurden für ein Echtdatenset (laborativ gemessene WLF und Standardbohrlochmessungen) empirische Prognosegleichungen für die Berechnung der Gesamt-WLF entwickelt. Die berechneten WLF zeigen im Vergleich zu gemessenen WLF Fehler zwischen 5% und 11%. Die Anwendung neu entwickelter, sowie in der Literatur publizierter Verfahren auf den NGB-Datensatz zeigt, dass mit den neu aufgestellten Gleichungen stets der geringste Prognosefehler erreicht wird. Die Inversion neu berechneter WLF-Profile erlaubt die Ableitung synthetischer Temperaturprofile, deren Vergleich zu gemessenen Gesteinstemperaturen in einen mittleren Fehler von < 5% resultiert. Im Rahmen geothermischer Berechnungen werden zur Umrechnung zwischen Matrix- und Gesamt-WLF häufig Zwei-Komponenten-Mischmodelle genutzt (Arithmetisches Mittel, Harmonische Mittel, Geometrisches Mittel, Hashin-Shtrikman Mittel, Effektives-Medium Mittel). Ein umfangreicher Datensatz aus trocken- und gesättigt-gemessenen WLF und Porosität erlaubt die Evaluierung dieser Modelle hinsichtlich Ihrer Prognosefähigkeit. Diese variiert für die untersuchten Modelle stark (Fehler: 5 – 53%), wobei das geometrische Mittel die größte, quantitativ aber weiterhin unbefriedigende Übereinstimmungen zeigt. Die Entwicklung und Anwendung mischmodelspezifischer Korrekturgleichungen führt zu deutlich reduzierten Fehlern. Das korrigierte geometrische Mittel zeigt dabei, bei deutlich reduzierter Fehlerstreubreite, erneut die größte Übereinstimmung zwischen berechneten und gemessenen Werten und scheint ein universell anwendbares Mischmodel für sedimentäre Gesteine zu sein. Die Entwicklung modelunabhängiger, gesteinstypbezogener Konvertierungsgleichungen ermöglicht die Abschätzung der wassergesättigten Gesamt-WLF aus trocken-gemessener WLF und Porosität mit einem mittleren Fehler < 9%. Die präsentierten Daten und die neu entwickelten Methoden erlauben künftig eine detailliertere und präzisere Parametrisierung thermischer Modelle sedimentärer Becken. KW - Wärmeleitfähigkeit KW - Temperaturfeld KW - Nordostdeutsches Becken KW - Bohrlochmessungen KW - Multivariate Analyse KW - Thermal-conductivity KW - Well-log analysis KW - Northeast German Basin KW - temperature field analysis KW - Multivariate statistic Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-67801 ER - TY - THES A1 - Endres, Christoph T1 - Warvenchronologie und Radiokarbondatierungen an holozänen und spätglazialen Sedimenten des Meerfelder Maares, Eifel Y1 - 1997 CY - Potsdam ER - TY - THES A1 - Ruch, Joël T1 - Volcano deformation analysis in the Lazufre area (central Andes) using geodetic and geological observations T1 - Vulkan Deformationsanalyse im Bereich Lazufre (Zentral-Anden) mit geodätischen und geologischen Beobachtungen N2 - Large-scale volcanic deformation recently detected by radar interferometry (InSAR) provides new information and thus new scientific challenges for understanding volcano-tectonic activity and magmatic systems. The destabilization of such a system at depth noticeably affects the surrounding environment through magma injection, ground displacement and volcanic eruptions. To determine the spatiotemporal evolution of the Lazufre volcanic area located in the central Andes, we combined short-term ground displacement acquired by InSAR with long-term geological observations. Ground displacement was first detected using InSAR in 1997. By 2008, this displacement affected 1800 km2 of the surface, an area comparable in size to the deformation observed at caldera systems. The original displacement was followed in 2000 by a second, small-scale, neighbouring deformation located on the Lastarria volcano. We performed a detailed analysis of the volcanic structures at Lazufre and found relationships with the volcano deformations observed with InSAR. We infer that these observations are both likely to be the surface expression of a long-lived magmatic system evolving at depth. It is not yet clear whether Lazufre may trigger larger unrest or volcanic eruptions; however, the second deformation detected at Lastarria and the clear increase of the large-scale deformation rate make this an area of particular interest for closer continuous monitoring. N2 - Vulkanische Deformationen in großem Maßstab, die mittels InSAR gemessen wurden, liefern neue Informationen und dadurch einen neuen Blickwinkel auf vulkan-tektonische Aktivitäten und das Verständnis von langlebigen, magmatischen Systemen. Die Destabilisierung eines solchen Systems in der Tiefe beeinflusst dauerhaft die Oberfläche durch Versatz des Bodens, magmatische Einflüsse und vulkanische Unruhen. Mit der Kombination aus kleinräumigem Bodenversatz gemessen mittels InSAR, numerischer Modellierung und langfristigen geologischen Beobachtungen, analysieren wir die Gegend um den Vulkan Lazufre in den Zentralanden, um die raumzeitliche Entwicklung der Region zu bestimmen. Bodenversatz wurde hierbei im Jahr 1997 mittels Radar-Interferrometrie (InSAR) gemessen, was eine Fläche von 1800 km² ausmacht, vergleichbar mit der Größe der Deformation des Kraters. Im Jahr 2000 wurde zusätzlich eine kleinräumige Deformation am Nachbarvulkan Lastarria entdeckt. Wir sehen räumliche als auch zeitliche Verbindungen zwischen der Deformation des Vulkans und vulkanischen Strukturen innerhalb der betroffenen Gegend. Wir folgern daraus, dass diese Beobachtungen der Ausdruck eines langlebigen, magmatischen Systems in der Tiefe an der Oberfläche sind. Es ist noch nicht klar, ob Lazufre größere vulkanische Unruhen, wie zum Beispiel Eruptionen auslösen könnte, aber die Deformation am Vulkan Lastarria und ein Anstieg der großräumigen Deformationsrate, machen diese Region interessant für eine zukünftige, kontinuierliche Überwachung. KW - Vulkan Verformung KW - InSAR KW - zentralen Anden KW - Spannungsfeld KW - volcano deformation KW - InSAR KW - central Andes KW - stress field Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-47361 ER - TY - THES A1 - Zali, Zahra T1 - Volcanic tremor analysis based on advanced signal processing concepts including music information retrieval (MIR) strategies N2 - Volcanoes are one of the Earth’s most dynamic zones and responsible for many changes in our planet. Volcano seismology aims to provide an understanding of the physical processes in volcanic systems and anticipate the style and timing of eruptions by analyzing the seismic records. Volcanic tremor signals are usually observed in the seismic records before or during volcanic eruptions. Their analysis contributes to evaluate the evolving volcanic activity and potentially predict eruptions. Years of continuous seismic monitoring now provide useful information for operational eruption forecasting. The continuously growing amount of seismic recordings, however, poses a challenge for analysis, information extraction, and interpretation, to support timely decision making during volcanic crises. Furthermore, the complexity of eruption processes and precursory activities makes the analysis challenging. A challenge in studying seismic signals of volcanic origin is the coexistence of transient signal swarms and long-lasting volcanic tremor signals. Separating transient events from volcanic tremors can, therefore, contribute to improving our understanding of the underlying physical processes. Some similar issues (data reduction, source separation, extraction, and classification) are addressed in the context of music information retrieval (MIR). The signal characteristics of acoustic and seismic recordings comprise a number of similarities. This thesis is going beyond classical signal analysis techniques usually employed in seismology by exploiting similarities of seismic and acoustic signals and building the information retrieval strategy on the expertise developed in the field of MIR. First, inspired by the idea of harmonic–percussive separation (HPS) in musical signal processing, I have developed a method to extract harmonic volcanic tremor signals and to detect transient events from seismic recordings. This provides a clean tremor signal suitable for tremor investigation along with a characteristic function suitable for earthquake detection. Second, using HPS algorithms, I have developed a noise reduction technique for seismic signals. This method is especially useful for denoising ocean bottom seismometers, which are highly contaminated by noise. The advantage of this method compared to other denoising techniques is that it doesn’t introduce distortion to the broadband earthquake waveforms, which makes it reliable for different applications in passive seismological analysis. Third, to address the challenge of extracting information from high-dimensional data and investigating the complex eruptive phases, I have developed an advanced machine learning model that results in a comprehensive signal processing scheme for volcanic tremors. Using this method seismic signatures of major eruptive phases can be automatically detected. This helps to provide a chronology of the volcanic system. Also, this model is capable to detect weak precursory volcanic tremors prior to the eruption, which could be used as an indicator of imminent eruptive activity. The extracted patterns of seismicity and their temporal variations finally provide an explanation for the transition mechanism between eruptive phases. N2 - Vulkane gehören zu den dynamischsten Zonen der Erde und sind für viele Veränderungen auf unserem Planeten verantwortlich. Die Vulkanseismologie zielt darauf ab, physikalischen Prozesse in Vulkansystemen besser zu verstehen und die Art und den Zeitpunkt von Eruptionen durch die Analyse der seismischen Aufzeichnungen vorherzusagen. Die Signale vulkanischer Tremore werden normalerweise vor oder während Vulkanausbrüchen beobachtet und müssen überwacht werden, um die vulkanische Aktivität zu bewerten. Die Untersuchung vulkanischer Tremore ist ein wichtiger Teil der Vulkanüberwachung, die darauf abzielt, Anzeichen für das Erwachen oder Wiedererwachen von Vulkanen zu erkennen und möglicherweise Ausbrüche vorherzusagen. Mehrere Dekaden kontinuierlicher seismischer Überwachung liefern nützliche Informationen für die operative Eruptionsvorhersage. Die ständig wachsende Menge an seismischen Aufzeichnungen stellt jedoch eine Herausforderung für die Analyse, Informationsextraktion und Interpretation für die zeitnahe Entscheidungsfindung während Vulkankrisen dar. Darüber hinaus erschweren die Komplexität der Eruptionsprozesse und Vorläuferaktivitäten die Analyse. Eine Herausforderung bei der Untersuchung seismischer Signale vulkanischen Ursprungs ist die Koexistenz von transienten Signalschwärmen und lang anhaltenden vulkanischen Tremoren. Die Trennung dieser beiden Signaltypen kann daher dazu beitragen, unser Verständnis der zugrunde liegenden physikalischen Prozesse zu verbessern. Einige ähnliche Probleme (Datenreduktion, Quellentrennung, Extraktion und Klassifizierung) werden im Zusammenhang mit Music Information Retrieval (MIR, dt. Etwa Musik-Informationsabruf) behandelt. Die Signaleigenschaften von akustischen und seismischen Aufzeichnungen weisen eine Reihe von Gemeinsamkeiten auf. Ich gehe über die klassischen Signalanalysetechniken hinaus, die normalerweise in der Seismologie verwendet werden, indem ich die Ähnlichkeiten von seismischen und akustischen Signalen und das Fachwissen aus dem Gebiet der MIR zur Informationsgewinnung nutze. Inspiriert von der Idee der harmonisch-perkussiven Trennung (HPS) in der musikalischen Signalverarbeitung habe ich eine Methode entwickelt, mit der harmonische vulkanische Erschütterungssignale extrahiert und transiente Ereignisse aus seismischen Aufzeichnungen erkannt werden können. Dies liefert ein sauberes Tremorsignal für die Tremoruntersuchung, sowie eine charakteristischen Funktion, die für die Erdbebenerkennung geeignet ist. Weiterhin habe ich unter Verwendung von HPS-Algorithmen eine Rauschunterdrückungstechnik für seismische Signale entwickelt. Diese kann zum Beispiel verwendet werden, um klarere Signale an Meeresbodenseismometern zu erhalten, die sonst durch zu starkes Rauschen überdeckt sind. Der Vorteil dieser Methode im Vergleich zu anderen Denoising-Techniken besteht darin, dass sie keine Verzerrung in der Breitbandantwort der Erdbebenwellen einführt, was sie für verschiedene Anwendungen in der passiven seismologischen Analyse zuverlässiger macht. Um Informationen aus hochdimensionalen Daten zu extrahieren und komplexe Eruptionsphasen zu untersuchen, habe ich ein fortschrittliches maschinelles Lernmodell entwickelt, aus dem ein umfassendes Signalverarbeitungsschema für vulkanische Erschütterungen abgeleitet werden kann. Mit dieser Methode können automatisch seismische Signaturen größerer Eruptionsphasen identifizieren werden. Dies ist nützlich, um die Chronologie eines Vulkansystems zu verstehen. Außerdem ist dieses Modell in der Lage, schwache vulkanische Vorläuferbeben zu erkennen, die als Indikator für bevorstehende Eruptionsaktivität verwendet werden könnten. Basierend auf den extrahierten Seismizitätsmustern und ihren zeitlichen Variationen liefere ich eine Erklärung für den Übergangsmechanismus zwischen verschiedenen Eruptionsphasen. KW - seismic signal processing KW - machine learning KW - volcano seismology KW - music information retrieval KW - noise reduction Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-610866 ER - TY - THES A1 - Hinrichsen, Arne T1 - Vergleichend-ökologische Untersuchung über Konversionsgebiete in Brandenburg als Lebensraum solitärer Wespen (Hymenoptera Aculeata) mit besonderer Berücksichtigung der Sukzessionsfolgen Y1 - 1999 CY - Potsdam ER - TY - THES A1 - Niemeyer, Bastian T1 - Vegetation reconstruction and assessment of plant diversity at the treeline ecotone in northern Siberia Y1 - 2016 ER -