TY - JOUR A1 - Feld, Christian A1 - Mechie, James A1 - Hübscher, Christian A1 - Hall, Jeremy A1 - Nicolaides, Stelios A1 - Gurbuz, Cemil A1 - Bauer, Klaus A1 - Louden, Keith A1 - Weber, Michael T1 - Crustal structure of the eratosthenes seamount, cyprus and S. Turkey from an amphibian wide-angle seismic profile JF - Tectonophysics : international journal of geotectonics and the geology and physics of the interior of the earth N2 - In 2010, project CoCoCo (incipient COntinent-COntinent COllision) recorded a 650 km long amphibian N-S wide-angle seismic profile, extending from the Anatolian plateau across southern Turkey and Cyprus to just south of the Eratosthenes Seamount (ESM). The aim of the project is to reveal the impact of the transition from subduction to continent-continent collision of Africa with Anatolia. Arrival picking, finite-differences ray-tracing and inversion of the offshore and on-offshore data produced a tomographic model across southern Cyprus, the accretionary wedge and the ESM. The main features of this model are (1) crustal P-velocities predominantly lower than 6.5 km/s beneath the ESM, (2) crustal thickness between 28 and 37 km, (3) an upper crustal reflection at 5 km depth beneath the ESM, (4) the likely presence of oceanic crust south of the ESM and a transform margin north of it and (5) a 12 km thick ophiolite sequence on Cyprus. Land shots on Turkey, also recorded on Cyprus, gravity data and geological and previous seismic investigations allow to derive a layered velocity model beneath Anatolia and the northern part of Cyprus. The main features of this model are (1) Moho depths of 38–45 km beneath the Anatolian plateau, (2) an upper and lower crust with large lateral changes in velocity and thickness, (3) a north-dipping subducting plate below Cyprus with a steepening of the dip-angle of the plate at about 45 km depth. Thus, the wide-angle seismic and gravity data provide detailed insights into the 2-D geometry and velocity structures associated with the Cyprus Arc collision zone. Finally, integrated analysis of the geophysics and geology allows a comprehensive interpretation of the crustal structure related to the collision process. KW - Controlled source seismology KW - Subduction zone processes KW - Continental margins: convergent KW - Crustal structure KW - Europe KW - Gravity anomalies and Earth structure Y1 - 2017 U6 - https://doi.org/10.1016/j.tecto.2017.02.003 SN - 0040-1951 SN - 1879-3266 VL - 700 SP - 32 EP - 59 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Hendriyana, Andri A1 - Bauer, Klaus A1 - Muksin, Umar A1 - Weber, Michael T1 - AIC-based diffraction stacking for local earthquake locations at the Sumatran Fault (Indonesia) JF - Geophysical journal international N2 - We present a new workflow for the localization of seismic events which is based on a diffraction stacking approach. In order to address the effects from complex source radiation patterns, we suggest to compute diffraction stacking from a characteristic function (CF) instead of stacking the original waveform data. A new CF, which is called in the following mAIC (modified from Akaike Information Criterion) is proposed. We demonstrate that both P- and S-wave onsets can be detected accurately. To avoid cross-talk between P and S waves due to inaccurate velocity models, we separate the P and S waves from the mAIC function by making use of polarization attributes. Then, the final image function is represented by the largest eigenvalue as a result of the covariance analysis between P-and S-image functions. Results from synthetic experiments show that the proposed diffraction stacking provides reliable results. The workflow of the diffraction stacking method was finally applied to local earthquake data from Sumatra, Indonesia. Recordings from a temporary network of 42 stations deployed for nine months around the Tarutung pull-apart basin were analysed. The seismic event locations resulting from the diffraction stacking method align along a segment of the Sumatran Fault. A more complex distribution of seismicity is imaged within and around the Tarutung basin. Two lineaments striking N-S were found in the centre of the Tarutung basin which support independent results from structural geology. KW - Time-series analysis KW - Body waves KW - Computational seismology KW - Earthquake source observations KW - Seismicity and tectonics Y1 - 2018 U6 - https://doi.org/10.1093/gji/ggy045 SN - 0956-540X SN - 1365-246X VL - 213 IS - 2 SP - 952 EP - 962 PB - Oxford Univ. Press CY - Oxford ER - TY - JOUR A1 - Ryberg, Trond A1 - Haberland, Christian A1 - Haberlau, Thomas A1 - Weber, Michael H. A1 - Bauer, Klaus A1 - Behrmann, Jan H. A1 - Jokat, Wilfried T1 - Crustal structure of northwest Namibia: Evidence for plume-rift-continent interaction JF - Geology N2 - The causes for the formation of large igneous provinces and hotspot trails are still a matter of considerable dispute. Seismic tomography and other studies suggest that hot mantle material rising from the core-mantle boundary (CMB) might play a significant role in the formation of such hotspot trails. An important area to verify this concept is the South Atlantic region, with hotspot trails that spatially coincide with one of the largest low-velocity regions at the CMB, the African large low shear-wave velocity province. The Walvis Ridge started to form during the separation of the South American and African continents at ca. 130 Ma as a consequence of Gondwana breakup. Here, we present the first deep-seismic sounding images of the crustal structure from the landfall area of the Walvis Ridge at the Namibian coast to constrain processes of plume-lithosphere interaction and the formation of continental flood basalts (Parana and Etendeka continental flood basalts) and associated intrusive rocks. Our study identified a narrow region (<100 km) of high-seismic-velocity anomalies in the middle and lower crust, which we interpret as a massive mafic intrusion into the northern Namibian continental crust. Seismic crustal reflection imaging shows a flat Moho as well as reflectors connecting the high-velocity body with shallow crustal structures that we speculate to mark potential feeder channels of the Etendeka continental flood basalt. We suggest that the observed massive but localized mafic intrusion into the lower crust results from similar-sized variations in the lithosphere (i.e., lithosphere thickness or preexisting structures). Y1 - 2015 U6 - https://doi.org/10.1130/G36768.1 SN - 0091-7613 SN - 1943-2682 VL - 43 IS - 8 SP - 739 EP - 742 PB - American Institute of Physics CY - Boulder ER - TY - JOUR A1 - Muksin, Umar A1 - Haberland, Christian A1 - Nukman, Mochamad A1 - Bauer, Klaus A1 - Weber, Michael H. T1 - Detailed fault structure of the Tarutung Pull-Apart Basin in Sumatra, Indonesia, derived from local earthquake data JF - Journal of Asian earth sciences N2 - The Tarutung Basin is located at a right step-over in the northern central segment of the dextral strike-slip Sumatran Fault System (SFS). Details of the fault structure along the Tarutung Basin are derived from the relocations of seismicity as well as from focal mechanism and structural geology. The seismicity distribution derived by a 3D inversion for hypocenter relocation is clustered according to a fault-like seismicity distribution. The seismicity is relocated with a double-difference technique (HYPODD) involving the waveform cross-correlations. We used 46,904 and 3191 arrival differences obtained from catalogue data and cross-correlation analysis, respectively. Focal mechanisms of events were analyzed by applying a grid search method (HASH code). Although there is no significant shift of the hypocenters (10.8 m in average) and centroids (167 m in average), the application of the double difference relocation sharpens the earthquake distribution. The earthquake lineation reflects the fault system, the extensional duplex fault system, and the negative flower structure within the Tarutung Basin. The focal mechanisms of events at the edge of the basin are dominantly of strike-slip type representing the dextral strike-slip Sumatran Fault System. The almost north south striking normal fault events along extensional zones beneath the basin correlate with the maximum principal stress direction which is the direction of the Indo-Australian plate motion. The extensional zones form an en-echelon pattern indicated by the presence of strike-slip faults striking NE SW to NW SE events. The detailed characteristics of the fault system derived from the seismological study are also corroborated by structural geology at the surface. (C) 2014 Elsevier Ltd. All rights reserved. KW - Focal mechanism KW - Seismicity KW - Structural geology KW - Extensional duplex KW - Flower structure KW - Sumatran fault KW - Pull-Apart Basin Y1 - 2014 U6 - https://doi.org/10.1016/j.jseaes.2014.09.009 SN - 1367-9120 SN - 1878-5786 VL - 96 SP - 123 EP - 131 PB - Elsevier CY - Oxford ER - TY - JOUR A1 - Weber, Michael H. A1 - Helwig, S. L. A1 - Bauer, Klaus A1 - Haberland, Christian A1 - Koch, Olaf A1 - Ryberg, T. A1 - Maercklin, N. A1 - Ritter, O. A1 - Schulze, A. T1 - Near-surface properties of an active fault derived by joint interpretation of different geophysical methods - the Arava/Araba Fault in the Middle East JF - Near surface geophysics N2 - The motion of tectonic plates is accommodated at fault zones. One of the unanswered questions about fault zones relates to the role they play in controlling shallow and local hydrology. This study focuses on the Arava/Araba Fault (AF) zone, the southern portion of the Dead Sea Transform (DST) in the Middle East. We combine seismic and electromagnetic methods (EM) to image the geometry and map the petro-physical properties and water occurrence in the top 100 m of this active fault. For three profiles, P-velocity and resistivity images were derived independently. Using a neural network cluster analysis three classes with similar P-velocity and resistivities could then be determined from these images. These classes correspond to spatial domains of specific material and wetness. The first class occurs primarily east of the fault consisting of 'wet' sand (dunes) and brecciated sediments, whereas the second class composed of similar material located west of the fault is 'dry'. The third class lies at depth below ca. 50 m and is composed of highly deformed and weathered Precambrian rocks that constitute the multi-branch fault zone of the AF at this location. The combination of two independent measurements like seismics and EM linked by a stringent mathematical approach has thus shown the potential to delineate the interplay of lithology and water near active faults. Y1 - 2012 U6 - https://doi.org/10.3997/1873-0604.2012031 SN - 1569-4445 VL - 10 IS - 5 SP - 381 EP - 390 PB - European Association of Geoscientists & Engineers CY - Houten ER - TY - JOUR A1 - Muksin, Umar A1 - Haberland, Christian A1 - Bauer, Klaus A1 - Weber, Michael H. T1 - Three-dimensional upper crustal structure of the geothermal system in Tarutung (North Sumatra, Indonesia) revealed by seismic attenuation tomography JF - Geophysical journal international N2 - The geothermal potential in Tarutung is controlled by both the Sumatra Fault system and young arc volcanism. In this study we use the spatial distribution of seismic attenuation, calculated from local earthquake recordings, to image the 3-D seismic attenuation of the area and relate it with the temperature anomalies and the fluid distribution of the subsurface. A temporary seismic network of 42 stations was deployed around Tarutung and Sarulla (south of Tarutung) for a period of 10 months starting in 2011 May. Within this period, the network recorded 2586 local events. A high-quality subset of 229 events recorded by at least 10 stations was used for the attenuation inversion (tomography). Path-average attenuation (t(p)*) was calculated by using a spectral inversion method. The spread function, the contour lines of the model resolution matrix and the recovery test results show that our 3-D attenuation model (Q(p)) has good resolution around the Tarutung Basin and along the Sarulla graben. High attenuation (low Q(p)) related to the geothermal system is found in the northeast of the Tarutung Basin suggesting fluid pathways from below the Sumatra Fault. The upper part of the studied geothermal system in the Tarutung district seems to be mainly controlled by the fault structure rather than by magmatic activities. In the southwest of the Tarutung Basin, the high attenuation zone is associated with the Martimbang volcano. In the Sarulla region, a low-Q(p) anomaly is found along the graben within the vicinity of the Hopong caldera. KW - Seismicity and tectonics KW - Body waves KW - Seismic attenuation KW - Seismic tomography Y1 - 2013 U6 - https://doi.org/10.1093/gji/ggt383 SN - 0956-540X SN - 1365-246X VL - 195 IS - 3 SP - 2037 EP - 2049 PB - Oxford Univ. Press CY - Oxford ER - TY - JOUR A1 - Bauer, Klaus A1 - Moeck, Inga A1 - Norden, Ben A1 - Schulze, Alexander A1 - Weber, Michael H. A1 - Wirth, Holger T1 - Tomographic P wave velocity and vertical velocity gradient structure across the geothermal site Groß Schoenebeck (NE German Basin) : relationship to lithology, salt tectonics, and thermal regime N2 - Seismic wide-angle data were collected along a 40-km-long profile centered at the geothermal research well GrSk 3/90 in the Northeast German Basin. Tomographic inversion of travel time data provided a velocity and a vertical velocity gradient model, indicative of Cenozoic to Pre-Permian sediments. Wide-angle reflections are modeled and interpreted as top Zechstein and top Pre-Permian. Changes in velocity gradients are interpreted as the transition from mechanical to chemical compaction at 2-3 km depth, and localized salt structures are imaged, suggesting a previously unknown salt pillow in the southern part of the seismic profile. The Zechstein salt shows decreased velocities in the adjacent salt pillows compared to the salt lows, which is confirmed by sonic log data. This decrease in velocity could be explained by the mobilization of less dense salt, which moved and formed the salt pillows, whereas the denser salt remained in place at the salt lows. We interpret a narrow subvertical low-velocity zone under the salt pillow at GrSk 3/ 90 as a fault in the deep Permian to Pre-Permian. This WNW-ESE trending fault influenced the location of the salt tectonics and led to the formation of a fault-bounded graben in the Rotliegend sandstones with optimal mechanical conditions for geothermal production. Thermal modeling showed that salt pillows are related to chimney effects, a decrease in temperature, and increasing velocity. The assumed variations in salt lithology, density, and strain must thus be even higher to compensate for the temperature effect. Y1 - 2010 UR - http://www.agu.org/journals/jb/ U6 - https://doi.org/10.1029/2009jb006895 SN - 0148-0227 ER - TY - JOUR A1 - Weber, Michael H. A1 - Abu-Ayyash, Khalil A1 - Abueladas, Abdel-Rahman A1 - Agnon, Amotz A1 - Alasonati-Tašárová, Zuzana A1 - Al-Zubi, Hashim A1 - Babeyko, Andrey A1 - Bartov, Yuval A1 - Bauer, Klaus A1 - Becken, Michael A1 - Bedrosian, Paul A. A1 - Ben-Avraham, Zvi A1 - Bock, Günter A1 - Bohnhoff, Marco A1 - Bribach, Jens A1 - Dulski, Peter A1 - Ebbing, Joerg A1 - El-Kelani, Radwan J. A1 - Foerster, Andrea A1 - Förster, Hans-Jürgen A1 - Frieslander, Uri A1 - Garfunkel, Zvi A1 - Götze, Hans-Jürgen A1 - Haak, Volker A1 - Haberland, Christian A1 - Hassouneh, Mohammed A1 - Helwig, Stefan L. A1 - Hofstetter, Alfons A1 - Hoffmann-Rothe, Arne A1 - Jaeckel, Karl-Heinz A1 - Janssen, Christoph A1 - Jaser, Darweesh A1 - Kesten, Dagmar A1 - Khatib, Mohammed Ghiath A1 - Kind, Rainer A1 - Koch, Olaf A1 - Koulakov, Ivan A1 - Laske, Maria Gabi A1 - Maercklin, Nils T1 - Anatomy of the Dead Sea transform from lithospheric to microscopic scale N2 - Fault zones are the locations where motion of tectonic plates, often associated with earthquakes, is accommodated. Despite a rapid increase in the understanding of faults in the last decades, our knowledge of their geometry, petrophysical properties, and controlling processes remains incomplete. The central questions addressed here in our study of the Dead Sea Transform (DST) in the Middle East are as follows: (1) What are the structure and kinematics of a large fault zone? (2) What controls its structure and kinematics? (3) How does the DST compare to other plate boundary fault zones? The DST has accommodated a total of 105 km of left-lateral transform motion between the African and Arabian plates since early Miocene (similar to 20 Ma). The DST segment between the Dead Sea and the Red Sea, called the Arava/Araba Fault (AF), is studied here using a multidisciplinary and multiscale approach from the mu m to the plate tectonic scale. We observe that under the DST a narrow, subvertical zone cuts through crust and lithosphere. First, from west to east the crustal thickness increases smoothly from 26 to 39 km, and a subhorizontal lower crustal reflector is detected east of the AF. Second, several faults exist in the upper crust in a 40 km wide zone centered on the AF, but none have kilometer-size zones of decreased seismic velocities or zones of high electrical conductivities in the upper crust expected for large damage zones. Third, the AF is the main branch of the DST system, even though it has accommodated only a part (up to 60 km) of the overall 105 km of sinistral plate motion. Fourth, the AF acts as a barrier to fluids to a depth of 4 km, and the lithology changes abruptly across it. Fifth, in the top few hundred meters of the AF a locally transpressional regime is observed in a 100-300 m wide zone of deformed and displaced material, bordered by subparallel faults forming a positive flower structure. Other segments of the AF have a transtensional character with small pull-aparts along them. The damage zones of the individual faults are only 5-20 m wide at this depth range. Sixth, two areas on the AF show mesoscale to microscale faulting and veining in limestone sequences with faulting depths between 2 and 5 km. Seventh, fluids in the AF are carried downward into the fault zone. Only a minor fraction of fluids is derived from ascending hydrothermal fluids. However, we found that on the kilometer scale the AF does not act as an important fluid conduit. Most of these findings are corroborated using thermomechanical modeling where shear deformation in the upper crust is localized in one or two major faults; at larger depth, shear deformation occurs in a 20-40 km wide zone with a mechanically weak decoupling zone extending subvertically through the entire lithosphere. Y1 - 2009 UR - http://www.agu.org/journals/rg/ U6 - https://doi.org/10.1029/2008rg000264 SN - 8755-1209 ER - TY - THES A1 - Bauer, Klaus T1 - Charakterisierung eines vulkanisch geprägten passiven Kontinentalrandes mit seismischen Verfahren am Beispiel Namibias Y1 - 2000 UR - http://www.gfz-potsdam.de/bib/pub/str0102/0102.pdf UR - https://nbn-resolving.org/urn:nbn:de:kobv:b103-010123 ER -