TY - THES A1 - Schumacher, Soeren T1 - Saccharide recognition : boronic acids as receptors in polymeric networks T1 - Zuckererkennung in polymeren Netzwerken mittels Boronsäuren als Rezeptoren N2 - In this thesis entitled “Saccharide Recognition - Boronic acids as Receptors in Polymeric Networks” different aspects of boronic acid synthesis, their analysis and incorporation or attachment to different polymeric networks and characterisation thereof were investigated. The following key aspects were considered: • Provision of a variety of different characterised arylboronic acids and benzoboroxoles • Attachment of certain derivatives to nanoparticles and the characterisation of saccharide binding by means of isothermal titration calorimetry and displacement assay (ARS) to enhance the association constant to saccharides at pH 7.4 • Enhancement of selectivity in polymeric systems by means of molecular imprinting using fructose as template and a polymerisable benzoboroxole as functional monomer for the recognition at pH 7.4 (Joined by a diploma thesis of F. Grüneberger) • Development of biomimetic saccharide structures and the development of saccharide (especially glucose and fructose) binding MIPs by using these structures as template molecules. In the first part of the thesis different arylboronic acid derivatives were synthesised and their binding to glucose or fructose was investigated by means of isothermal titration calorimetry (ITC). It could be derived, which is in parallel to the literature, that derivatives bearing a methylhydroxyl-group in ortho-position to the boron (benzoboroxole) exhibit in most cases a two-fold higher association constant compared to the corresponding phenylboronic acid derivative. To gain a deeper understanding NMR spectroscopy and mass spectrometry with the benzoboroxole and glucose or fructose was performed. It could be shown that the exchange rate in terms of NMR time scale is quite slow since in titration experiments new peaks appeared. Via mass spectrometry of a mixture between benzoboroxole and glucose or fructose, different binding stoichiometries could be detected showing that the binding of saccharides is comparable with their binding to phenylboronic acid. In addition, the use of Alizarin Red S as an electrochemical reporter was described for the first time to monitor the saccharide binding to arylboronic acids not only with spectroscopy. Here, the redox behaviour and the displacement were recorded by cyclic voltammograms. In the second part different applications of boronic acids in polymeric networks were investigated. The attachment of benzoboroxoles to nanoparticles was investigated and monitored by means of isothermal titration calorimetry and a colourimetric assay with Alizarin Red S as the report dye. The investigations by isothermal titration calorimetry compared the fructose binding of arylboronic acids and benzoboroxoles coupled to these nanoparticles and “free” in solution. It could be shown that the attached derivatives showed a higher binding constant due to an increasing entropy term. This states for possible multivalent binding combined with a higher water release. Since ITC could not characterise the binding of glucose to these nanoparticles due to experimental restrictions the glucose binding at pH 7.4 was shown with ARS. Here, the displacement of ARS by fructose and also glucose could be followed and consequently these nanoparticles can be used for saccharide determination. Within this investigation also the temperature stability of these nanoparticles was examined and after normal sterilisation procedures (121°C, 20 min.) the binding behaviour was still unchanged. To target the selectivity of the used polymeric networks, molecular imprinting was used as a technique for creating artificial binding pockets on a molecular scale. As functional monomer 3-methacrylamidobenzoboroxole was introduced for the recognition of fructose. In comparison to polymers prepared with vinylphenylboronic acid the benzoboroxole containing polymer had a stronger binding at pH 7.4 which was shown for the first time. In addition, another imprinted polymer was synthesised especially for the recognition of glucose and fructose employing biomimetic saccharide analogues as template molecule. The advantage to use the saccharide analogues is the defined template-functional monomer complex during the polymerisation which is not the case, for example, for glucose-boronic acid interaction. The biomimetic character was proven through structural superimposition of crystal structures of the analogues with already described crystal structures of boronic acid esters of glucose and fructose. A molecularly imprinted polymer was synthesised with vinylphenylboronic acid as the functional monomer to show that both glucose and fructose are able to bind to the polymer which was predicted by the structural similarity of the analogues. The major scientific contributions of this thesis are • the determination of binding constants for some, not yet reported saccharide – boronic acid / benzoboroxole pairs, • the use of ARS as electrochemical reporter for saccharide detection, • the thermodynamic characterisation of a saccharide binding nanoparticle system containing benzoboroxole and functioning at pH 7.4, • the use of a polymerisable benzoboroxole as functional monomer for saccharide recognition in neutral, aqueous environments • and the synthesis and utilisation of biomimetic saccharide analogues as template molecules especially for the development of a glucose binding MIP. N2 - Die vorliegende Arbeit beschäftigte sich mit der Synthese verschiedener Boronsäurederivate und deren Charakterisierung und Anbindung oder Einbau in polymeren Netzwerken. Die synthetisierten Polymere werden charakterisiert bezüglich ihrer Morphologie und besonders hinsichtlich ihrer Saccharidbindung. Im Wesentlichen wurden die folgenden Aspekte bearbeitet: • Bereitstellung einer Reihe von verschiedenen Arylboronsäuren und Benzoboroxolderivaten • Modifizierung von Nanopartikeln mit verschiedenen Derivaten aus der Bibliothek mit dem Ziel die Bindingkonstanten zu Monosacchariden bei pH 7.4. zu erhöhen. Dabei werden isothermale Titrationskalorimetrie und ein spektroskopischer Verdrängungsassay (Alizarin Rot S) zum Bindungsnachweis verwendet. • Erhöhung der Selektivität von Polymeren mittels molekularen Prägens von Fruktose als Matrizenmolekül. Durch den Einsatz eines polymerisierbaren Benzoboroxolderivatives konnte die Anbindung bei pH 7.4 stattfinden (Dieser Teil der Arbeit wurde durch eine Diplomarbeit von F. Grüneberger unterstützt). • Entwicklung von biomimetischen saccharidanalogen Strukturen, die als Matrizenmoleküle während des molekularen Prägens eingesetzt werden, um ein Polymer für die Anbindung von Monosacchariden wie etwa Fruktose oder Glukose zu generieren. Im ersten Teil der Arbeit wurde die Synthese und Charakterisierung von verschiedenen Boronsäurederivaten beschrieben. Die Charakterisierung der Bindungskonstanten wurde mittels isothermaler Titrationskalorimetrie durchgeführt. Dabei konnte im Einklang mit der Literatur gezeigt werden, dass Derivative, die zusätzlich mit einer Methylhydroxygruppe in ortho-Position zum Bor (Benzoboroxol) derivatisiert sind, eine meist zweifach höhere Bindungskonstante als gleich substituierte Arylboronsäurederivate aufweisen. Durch 1H-NMR-Spektroskopie und Massenspektrometrie mit Benzoboroxol und Glukose oder Fruktose konnten die Bindung weiter charakterisiert werden. Dabei zeigten die Ergebnisse der 1H-NMR-Spektroskopie, dass die Bindung bezogen auf NMR-Zeitskalen recht langsam stattfindet, da es zu einer Verbreiterung der Peaks kommt. Die Ergebnisse der Massenspektrometrie zeigen, dass hinsichtlich der Stöchiometrie der Binding verschiedene Komplexe möglich sind, was in ähnlicher Weise für Phenylboronsäure schon gezeigt wurde. Zusätzlich wurde in diesem Teil der Arbeit wurde die Elektrochemie von Alizarin Rot S untersucht, um den Farbstoff, der spektroskopisch schon für den Bindungsnachweis zwischen einem Boronsäurederivat und verschiedenen Zuckern beschrieben ist, auch elektrochemisch zu nutzen. Im zweiten Teil der Arbeit wurden verschiedene Anwendungen von den charakterisierten Boronsäuren in polymeren Netzwerken beschrieben. Dabei wurde zunächst ein Polystyrollatex mit Benzoboroxol modifiziert und die Bindung von Glukose oder Fruktose mittels isothermaler Titrationskalorimetrie und einem spektroskopischen Farbassay untersucht. Die Untersuchungen mittels isothermaler Titrationskalorimetrie (ITC) wurden vergleichend zu frei in Lösung befindlichem Benzoboroxol durchgeführt. Es wurde eine höhere Bindungskonstante für die modifizierten Nanopartikel ermittelt, was auf die Erhöhung der Entropie im System zurückzuführen ist. Dies kann durch eine mutivalente Bindung und einer einhergehenden erhöhten Wasserfreisetzung erklärt werden. Da es nicht möglich war, die Glukosebindung mittels ITC zu verfolgen, wurde zusätzlich ein spektroskopischer Assay bei pH 7.4. durchgeführt. Bei diesem wird die Bindung von Fruktose oder Glukose durch Freisetzung von Alizarin Rot S verfolgt. In diesem Zusammenhang konnte auch gezeigt werden, dass die Nanopartikel nach Sterilisation bei 121°C für 20 Minuten eine vergleichbare Bindung des Farbstoffes zeigen, was die Temperaturstabilität der Partikel unterstreicht. Da in diesem System die Bindung von Zuckern abhängig von der Affinität der Zucker zu den Boronsäuren bestimmt wird, wurden molekular geprägte Polymere synthetisiert, die eine Selektivität für bestimmte Zucker zeigen. Als Funktionsmonomer wurde 3-Methacrylamidobenzboroxol verwendet. Im Vergleich zu Polymeren, die mit 3-Vinylphenylboronsäure als literaturbekanntes Funktionsmonomer synthetisiert worden sind, zeigt sich bei pH 7.4 eine höhere Bindung von Fruktose an Benzoboroxolpolymere. In einem anderen geprägten Polymer wurden biomimetische (zuckeranaloge) Substanzen als Matrizenmolekül verwendet. Der Vorteil dieser Substanz ist die Bildung eines definierten Boronsäureesters, der als Templat-Funktionsmonomerkomplexes einpolymerisiert wird. Im Gegensatz dazu weist beispielsweise ein Boronsäureester der Glukose keine definierte Struktur auf. Der biomimetische Charakter wurde durch strukturelle Überlagerung mit schon publizierten Kristallstrukturen von Boronsäureestern von Glukose und Fruktose gezeigt. Das zugehörige molekular geprägte Polymer wurde mit Vinylphenylboronsäure synthetisiert und zeigt eine Bindung von Glukose und Fruktose, was durch die Strukturüberlagerungen vorhergesagt wurde. Zusammenfassend sind die wesentlichen wissenschaftlichen Ergebnisse: • Bindungskostanten von neuen Zucker-Benzoboroxolpaaren, • Eignung von ARS als elektrochemische Nachweissubstanz der Saccharidbindung • Die thermodynamische Charakterisierung der Bindung von Fruktose oder Glukose an Nanopartikel, die Benzoboroxol - modifziert sind und so bei pH 7.4 Zucker binden können • Einsatz von Benzoboroxol als Funktionsmonomer • die Synthese und Nutzung von biomimetischen zuckeranalogen Matrizenmolekülen für die Entwicklung von molekular geprägten Polymeren für die Glukosebindung. KW - Zuckererkennung KW - Glucose KW - physiolgischer pH KW - Boronsäure KW - Benzoboroxol KW - Saccharide Recognition KW - Glucose KW - physiological pH KW - boronic acid KW - benzoboroxole Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-52869 ER - TY - JOUR A1 - Scheller, Frieder W. A1 - Yarman, Aysu A1 - Bachmann, Till A1 - Hirsch, Thomas A1 - Kubick, Stefan A1 - Renneberg, Reinhard A1 - Schumacher, Soeren A1 - Wollenberger, Ursula A1 - Teller, Carsten A1 - Bier, Frank Fabian ED - Gu, MB ED - Kim, HS T1 - Future of biosensors: a personal view JF - Advances in biochemical engineering, biotechnology JF - Advances in Biochemical Engineering-Biotechnology N2 - Biosensors representing the technological counterpart of living senses have found routine application in amperometric enzyme electrodes for decentralized blood glucose measurement, interaction analysis by surface plasmon resonance in drug development, and to some extent DNA chips for expression analysis and enzyme polymorphisms. These technologies have already reached a highly advanced level and need minor improvement at most. The dream of the "100-dollar' personal genome may come true in the next few years provided that the technological hurdles of nanopore technology or of polymerase-based single molecule sequencing can be overcome. Tailor-made recognition elements for biosensors including membrane-bound enzymes and receptors will be prepared by cell-free protein synthesis. As alternatives for biological recognition elements, molecularly imprinted polymers (MIPs) have been created. They have the potential to substitute antibodies in biosensors and biochips for the measurement of low-molecular-weight substances, proteins, viruses, and living cells. They are more stable than proteins and can be produced in large amounts by chemical synthesis. Integration of nanomaterials, especially of graphene, could lead to new miniaturized biosensors with high sensitivity and ultrafast response. In the future individual therapy will include genetic profiling of isoenzymes and polymorphic forms of drug-metabolizing enzymes especially of the cytochrome P450 family. For defining the pharmacokinetics including the clearance of a given genotype enzyme electrodes will be a useful tool. For decentralized online patient control or the integration into everyday "consumables' such as drinking water, foods, hygienic articles, clothing, or for control of air conditioners in buildings and cars and swimming pools, a new generation of "autonomous' biosensors will emerge. KW - Biosensors KW - Molecularly imprinted polymers KW - Personalized medicine Y1 - 2014 SN - 978-3-642-54143-8; 978-3-642-54142-1 U6 - https://doi.org/10.1007/10_2013_251 SN - 0724-6145 VL - 140 SP - 1 EP - 28 PB - Springer CY - Berlin ER - TY - INPR A1 - Baret, Jean-Christophe A1 - Belder, Detlev A1 - Bier, Frank Fabian A1 - Cao, Jialan A1 - Gruschke, Oliver A1 - Hardt, Steffen A1 - Kirschbaum, Michael A1 - Koehler, J. Michael A1 - Schumacher, Soeren A1 - Urban, G. A. A1 - Viefhues, Martina T1 - Contributors to the 10th Anniversary Germany issue T2 - LAB on a chip : miniaturisation for chemistry and biology Y1 - 2012 U6 - https://doi.org/10.1039/c1lc90139g SN - 1473-0197 VL - 12 IS - 3 SP - 419 EP - 421 PB - Royal Society of Chemistry CY - Cambridge ER -