TY - JOUR A1 - Oran, Rona A1 - Weiss, Benjamin P. A1 - Santacruz-Pich, Maria De Soria A1 - Jun, Insoo A1 - Lawrence, David J. A1 - Polanskey, Carol A. A1 - Ratliff, J. Martin A1 - Raymond, Carol A. A1 - Ream, Jodie B. A1 - Russell, Christopher T. A1 - Shprits, Yuri Y. A1 - Zuber, Maria T. A1 - Elkins-Tanton, Linda T. T1 - Maximum energies of trapped particles around magnetized planets and small bodies JF - Geophysical research letters N2 - Energetic charged particles trapped in planetary radiation belts are hazardous to spacecraft. Planned missions to iron-rich asteroids with possible strong remanent magnetic fields require an assessment of trapped particles energies. Using laboratory measurements of iron meteorites, we estimate the largest possible asteroid magnetic moment. Although weak compared to moments of planetary dynamos, the small body size may yield strong surface fields. We use hybrid simulations to confirm the formation of a magnetosphere with an extended quasi-dipolar region. However, the short length scale of the field implies that energetic particle motion would be nonadiabatic, making existing radiation belt theories not applicable. Our idealized particle simulations demonstrate that chaotic motions lead to particle loss at lower energies than those predicted by adiabatic theory, which may explain the energies of transiently trapped particles observed at Mercury, Ganymede, and Earth. However, even the most magnetized asteroids are unlikely to stably trap hazardous particles. KW - asteroid magnetospheres KW - (16) Psyche KW - Psyche mission KW - energetic KW - particles KW - chaotic motion KW - hybrid simulations Y1 - 2022 U6 - https://doi.org/10.1029/2021GL097014 SN - 0094-8276 SN - 1944-8007 VL - 49 IS - 13 PB - American Geophysical Union CY - Washington ER - TY - JOUR A1 - Oskinova, Lida A1 - Schaerer, Daniel T1 - Ionization of He II in star-forming galaxies by X-rays from cluster winds and superbubbles JF - Astronomy and astrophysics : an international weekly journal N2 - The nature of the sources powering nebular He II emission in star-forming galaxies remains debated, and various types of objects have been considered, including Wolf-Rayet stars, X-ray binaries, and Population III stars. Modern X-ray observations show the ubiquitous presence of hot gas filling star-forming galaxies. We use a collisional ionization plasma code to compute the specific He II ionizing flux produced by hot gas and show that if its temperature is not too high (less than or similar to 2.5 MK), then the observed levels of soft diffuse X-ray radiation could explain He II ionization in galaxies. To gain a physical understanding of this result, we propose a model that combines the hydrodynamics of cluster winds and hot superbubbles with observed populations of young massive clusters in galaxies. We find that in low-metallicity galaxies, the temperature of hot gas is lower and the production rate of He II ionizing photons is higher compared to high-metallicity galaxies. The reason is that the slower stellar winds of massive stars in lower-metallicity galaxies input less mechanical energy in the ambient medium. Furthermore, we show that ensembles of star clusters up to similar to 10-20 Myr old in galaxies can produce enough soft X-rays to induce nebular He II emission. We discuss observations of the template low-metallicity galaxy I Zw 18 and suggest that the He II nebula in this galaxy is powered by a hot superbubble. Finally, appreciating the complex nature of stellar feedback, we suggest that soft X-rays from hot superbubbles are among the dominant sources of He II ionizing flux in low-metallicity star-forming galaxies. KW - galaxies KW - ISM KW - high-redshift KW - bubbles KW - X-rays Y1 - 2022 U6 - https://doi.org/10.1051/0004-6361/202142520 SN - 0004-6361 SN - 1432-0746 VL - 661 PB - EDP Sciences CY - Les Ulis ER - TY - JOUR A1 - Oster, Simon A1 - Fritsch, Tobias A1 - Ulbricht, Alexander A1 - Mohr, Gunther A1 - Bruno, Giovanni A1 - Maierhofer, Christiane A1 - Altenburg, Simon T1 - On the registration of thermographic in situ monitoring data and computed tomography reference data in the scope of defect prediction in laser powder bed fusion JF - Metals : open access journal N2 - The detection of internal irregularities is crucial for quality assessment in metal-based additive manufacturing (AM) technologies such as laser powder bed fusion (L-PBF). The utilization of in-process thermography as an in situ monitoring tool in combination with post-process X-ray micro computed tomography (XCT) as a reference technique has shown great potential for this aim. Due to the small irregularity dimensions, a precise registration of the datasets is necessary as a requirement for correlation. In this study, the registration of thermography and XCT reference datasets of a cylindric specimen containing keyhole pores is carried out for the development of a porosity prediction model. The considered datasets show variations in shape, data type and dimensionality, especially due to shrinkage and material elevation effects present in the manufactured part. Since the resulting deformations are challenging for registration, a novel preprocessing methodology is introduced that involves an adaptive volume adjustment algorithm which is based on the porosity distribution in the specimen. Thus, the implementation of a simple three-dimensional image-to-image registration is enabled. The results demonstrate the influence of the part deformation on the resulting porosity location and the importance of registration in terms of irregularity prediction. KW - selective laser melting (SLM) KW - laser powder bed fusion (L-PBF) KW - additive KW - manufacturing (AM) KW - process monitoring KW - infrared thermography KW - X-ray KW - micro computed tomography (XCT) KW - defect detection KW - image registration Y1 - 2022 U6 - https://doi.org/10.3390/met12060947 SN - 2075-4701 VL - 12 IS - 6 PB - MDPI CY - Basel ER - TY - JOUR A1 - Padash, Amin A1 - Aghion, Erez A1 - Schulz, Alexander A1 - Barkai, Eli A1 - Chechkin, Aleksei V. A1 - Metzler, Ralf A1 - Kantz, Holger T1 - Local equilibrium properties of ultraslow diffusion in the Sinai model JF - New journal of physics N2 - We perform numerical studies of a thermally driven, overdamped particle in a random quenched force field, known as the Sinai model. We compare the unbounded motion on an infinite 1-dimensional domain to the motion in bounded domains with reflecting boundaries and show that the unbounded motion is at every time close to the equilibrium state of a finite system of growing size. This is due to time scale separation: inside wells of the random potential, there is relatively fast equilibration, while the motion across major potential barriers is ultraslow. Quantities studied by us are the time dependent mean squared displacement, the time dependent mean energy of an ensemble of particles, and the time dependent entropy of the probability distribution. Using a very fast numerical algorithm, we can explore times up top 10(17) steps and thereby also study finite-time crossover phenomena. KW - Sinai diffusion KW - clustering KW - local equilibrium Y1 - 2022 U6 - https://doi.org/10.1088/1367-2630/ac7df8 SN - 1367-2630 VL - 24 IS - 7 PB - IOP Publishing CY - Bristol ER - TY - JOUR A1 - Padash, Amin A1 - Sandev, Trifce A1 - Kantz, Holger A1 - Metzler, Ralf A1 - Chechkin, Aleksei T1 - Asymmetric Levy flights are more efficient in random search JF - Fractal and fractional N2 - We study the first-arrival (first-hitting) dynamics and efficiency of a one-dimensional random search model performing asymmetric Levy flights by leveraging the Fokker-Planck equation with a delta-sink and an asymmetric space-fractional derivative operator with stable index alpha and asymmetry (skewness) parameter beta. We find exact analytical results for the probability density of first-arrival times and the search efficiency, and we analyse their behaviour within the limits of short and long times. We find that when the starting point of the searcher is to the right of the target, random search by Brownian motion is more efficient than Levy flights with beta <= 0 (with a rightward bias) for short initial distances, while for beta>0 (with a leftward bias) Levy flights with alpha -> 1 are more efficient. When increasing the initial distance of the searcher to the target, Levy flight search (except for alpha=1 with beta=0) is more efficient than the Brownian search. Moreover, the asymmetry in jumps leads to essentially higher efficiency of the Levy search compared to symmetric Levy flights at both short and long distances, and the effect is more pronounced for stable indices alpha close to unity. KW - asymmetric Levy flights KW - first-arrival density KW - search efficiency Y1 - 2022 U6 - https://doi.org/10.3390/fractalfract6050260 SN - 2504-3110 VL - 6 IS - 5 PB - MDPI CY - Basel ER - TY - JOUR A1 - Panchal, Gyanendra A1 - Kojda, Sandrino Danny A1 - Sahoo, Sophia A1 - Bagri, Anita A1 - Kunwar, Hemant Singh A1 - Bocklage, Lars A1 - Panchwanee, Anjali A1 - Sathe, Vasant G. A1 - Fritsch, Katharina A1 - Habicht, Klaus A1 - Choudhary, Ram Janay A1 - Phase, Deodutta M. T1 - Strain and electric field control of magnetic and electrical transport properties in a magnetoelastically coupled Fe3O4/BaTiO3 (001) heterostructure JF - Physical review : B, Condensed matter and materials physics N2 - We present a study of the control of electric field induced strain on the magnetic and electrical transport properties in a magnetoelastically coupled artificial multiferroic Fe3O4/BaTiO3 heterostructure. In this Fe3O4/BaTiO3 heterostructure, the Fe3O4 thin film is epitaxially grown in the form of bilateral domains, analogous to a-c stripe domains of the underlying BaTiO3(001) substrate. By in situ electric field dependent magnetization measurements, we demonstrate the extrinsic control of the magnetic anisotropy and the characteristic Verwey metal-insulator transition of the epitaxial Fe3O4 thin film in a wide temperature range between 20-300 K, via strain mediated converse magnetoelectric coupling. In addition, we observe strain induced modulations in the magnetic and electrical transport properties of the Fe3O4 thin film across the thermally driven intrinsic ferroelectric and structural phase transitions of the BaTiO3 substrate. In situ electric field dependent Raman measurements reveal that the electric field does not significantly modify the antiphase boundary defects in the Fe3O4 thin film once it is thermodynamically stable after deposition and that the modification of the magnetic properties is mainly caused by strain induced lattice distortions and magnetic anisotropy. These results provide a framework to realize electrical control of the magnetization in a classical highly correlated transition metal oxide. Y1 - 2022 U6 - https://doi.org/10.1103/PhysRevB.105.224419 SN - 2469-9950 SN - 2469-9969 VL - 105 IS - 22 PB - The American Institute of Physics CY - Woodbury, NY ER - TY - JOUR A1 - Pelisoli, Ingrid A1 - Dorsch, Matti A1 - Heber, Ulrich A1 - Gänsicke, Boris A1 - Geier, Stephan A1 - Kupfer, Thomas A1 - Nemeth, Peter A1 - Scaringi, Simone A1 - Schaffenroth, Veronika T1 - Discovery and analysis of three magnetic hot subdwarf stars BT - evidence for merger-induced magnetic fields JF - Monthly notices of the Royal Astronomical Society N2 - Magnetic fields can play an important role in stellar evolution. Among white dwarfs, the most common stellar remnant, the fraction of magnetic systems is more than 20 per cent. The origin of magnetic fields in white dwarfs, which show strengths ranging from 40 kG to hundreds of MG, is still a topic of debate. In contrast, only one magnetic hot subdwarf star has been identified out of thousands of known systems. Hot subdwarfs are formed from binary interaction, a process often associated with the generation of magnetic fields, and will evolve to become white dwarfs, which makes the lack of detected magnetic hot subdwarfs a puzzling phenomenon. Here we report the discovery of three new magnetic hot subdwarfs with field strengths in the range 300-500 kG. Like the only previously known system, they are all helium-rich O-type stars (He-sdOs). We analysed multiple archival spectra of the three systems and derived their stellar properties. We find that they all lack radial velocity variability, suggesting formation via a merger channel. However, we derive higher than typical hydrogen abundances for their spectral type, which are in disagreement with current model predictions. Our findings suggest a lower limit to the magnetic fraction of hot subdwarfs of 0.147(+0.143)(-0.047) per cent, and provide evidence for merger-induced magnetic fields which could explain white dwarfs with field strengths of 50-150 MG, assuming magnetic flux conservation. KW - stars: magnetic field KW - subdwarfs Y1 - 2022 U6 - https://doi.org/10.1093/mnras/stac1069 SN - 0035-8711 SN - 1365-2966 VL - 515 IS - 2 SP - 2496 EP - 2510 PB - Oxford University Press CY - Oxford ER - TY - JOUR A1 - Pena-Camargo, Francisco A1 - Thiesbrummel, Jarla A1 - Hempel, Hannes A1 - Musiienko, Artem A1 - Le Corre, Vincent M. A1 - Diekmann, Jonas A1 - Warby, Jonathan A1 - Unold, Thomas A1 - Lang, Felix A1 - Neher, Dieter A1 - Stolterfoht, Martin T1 - Revealing the doping density in perovskite solar cells and its impact on device performance JF - Applied physics reviews N2 - Traditional inorganic semiconductors can be electronically doped with high precision. Conversely, there is still conjecture regarding the assessment of the electronic doping density in metal-halide perovskites, not to mention of a control thereof. This paper presents a multifaceted approach to determine the electronic doping density for a range of different lead-halide perovskite systems. Optical and electrical characterization techniques, comprising intensity-dependent and transient photoluminescence, AC Hall effect, transfer-length-methods, and charge extraction measurements were instrumental in quantifying an upper limit for the doping density. The obtained values are subsequently compared to the electrode charge per cell volume under short-circuit conditions ( CUbi/eV), which amounts to roughly 10(16) cm(-3). This figure of merit represents the critical limit below which doping-induced charges do not influence the device performance. The experimental results consistently demonstrate that the doping density is below this critical threshold 10(12) cm(-3), which means << CUbi / e V) for all common lead-based metal-halide perovskites. Nevertheless, although the density of doping-induced charges is too low to redistribute the built-in voltage in the perovskite active layer, mobile ions are present in sufficient quantities to create space-charge-regions in the active layer, reminiscent of doped pn-junctions. These results are well supported by drift-diffusion simulations, which confirm that the device performance is not affected by such low doping densities. Y1 - 2022 U6 - https://doi.org/10.1063/5.0085286 SN - 1931-9401 VL - 9 IS - 2 PB - AIP Publishing CY - Melville ER - TY - THES A1 - Perdigón-Toro, Lorena T1 - On the Generation and Fate of Free Carriers in Non-Fullerene Acceptor Organic Solar Cells N2 - Organic solar cells offer an efficient and cost-effective alternative for solar energy harvesting. This type of photovoltaic cell typically consists of a blend of two organic semiconductors, an electron donating polymer and a low molecular weight electron acceptor to create what is known as a bulk heterojunction (BHJ) morphology. Traditionally, fullerene-based acceptors have been used for this purpose. In recent years, the development of new acceptor molecules, so-called non-fullerene acceptors (NFA), has breathed new life into organic solar cell research, enabling record efficiencies close to 19%. Today, NFA-based solar cells are approaching their inorganic competitors in terms of photocurrent generation, but lag in terms of open circuit voltage (V_OC). Interestingly, the V_OC of these cells benefits from small offsets of orbital energies at the donor-NFA interface, although previous knowledge considered large energy offsets to be critical for efficient charge carrier generation. In addition, there are several other electronic and structural features that distinguish NFAs from fullerenes. My thesis focuses on understanding the interplay between the unique attributes of NFAs and the physical processes occurring in solar cells. By combining various experimental techniques with drift-diffusion simulations, the generation of free charge carriers as well as their recombination in state-of-the-art NFA-based solar cells is characterized. For this purpose, solar cells based on the donor polymer PM6 and the NFA Y6 have been investigated. The generation of free charge carriers in PM6:Y6 is efficient and independent of electric field and excitation energy. Temperature-dependent measurements show a very low activation energy for photocurrent generation (about 6 meV), indicating barrierless charge carrier separation. Theoretical modeling suggests that Y6 molecules have large quadrupole moments, leading to band bending at the donor-acceptor interface and thereby reducing the electrostatic Coulomb dissociation barrier. In this regard, this work identifies poor extraction of free charges in competition with nongeminate recombination as a dominant loss process in PM6:Y6 devices. Subsequently, the spectral characteristics of PM6:Y6 solar cells were investigated with respect to the dominant process of charge carrier recombination. It was found that the photon emission under open-circuit conditions can be almost entirely attributed to the occupation and recombination of Y6 singlet excitons. Nevertheless, the recombination pathway via the singlet state contributes only 1% to the total recombination, which is dominated by the charge transfer state (CT-state) at the donor-acceptor interface. Further V_OC gains can therefore only be expected if the density and/or recombination rate of these CT-states can be significantly reduced. Finally, the role of energetic disorder in NFA solar cells is investigated by comparing Y6 with a structurally related derivative, named N4. Layer morphology studies combined with temperature-dependent charge transport experiments show significantly lower structural and energetic disorder in the case of the PM6:Y6 blend. For both PM6:Y6 and PM6:N4, disorder determines the maximum achievable V_OC, with PM6:Y6 benefiting from improved morphological order. Overall, the obtained findings point to avenues for the realization of NFA-based solar cells with even smaller V_OC losses. Further reduction of nongeminate recombination and energetic disorder should result in organic solar cells with efficiencies above 20% in the future. N2 - Organische Solarzellen bieten eine effiziente und kostengünstige Alternative für die Nutzung von Sonnenenergie. Bei dieser Art von Photovoltaikzellen werden in der Regel zwei organische Halbleiter, ein elektronenspendendes Polymer und ein niedermolekularer Elektronenakzeptor gemischt, um eine sogenannte „Bulk-Heterojunction“ (BHJ)-Morphologie zu erzeugen. Traditionell wurden hierfür Fulleren-basierte Akzeptoren verwendet. In den letzten Jahren hat die Entwicklung neuer Akzeptor-Moleküle, so genannter Nicht-Fulleren-Akzeptoren (NFA), der organischen Solarzellenforschung neues Leben eingehaucht und damit Rekordwirkungsgrade >19 % ermöglicht. Heutzutage nähern sich NFA-basierte Solarzellen ihren anorganischen Konkurrenten bezüglich der Photostromerzeugung an, nicht jedoch im Hinblick auf die Leerlaufspannung (V_OC). Interessanterweise profitiert der V_OC dieser Zellen von kleinen Offsets der Orbitalenergien an der Donor-NFA-Grenzfläche, obwohl nach bisherigem Wissen große Energieoffsets als entscheidend für die effiziente Ladungsträgergenerierung an der Heterogrenzfläche galten. Darüber hinaus gibt es eine Reihe weiterer elektronischer und struktureller Merkmale, die NFAs von Fullerenen unterscheiden. Meine Dissertation konzentriert sich auf ein tiefgreifendes Verständnis des Zusammenspiels der einzigartigen Eigenschaften von NFAs und den physikalischen Prozessen in daraus hergestellten Solarzellen. Durch die Kombination verschiedener experimenteller Techniken mit Drift-Diffusions-Simulationen wird die Erzeugung freier Ladungsträger sowie deren Rekombination in modernen NFA-basierten Solarzellen charakterisiert. Zu diesem Zweck wurden Solarzellen auf Basis des Donor-Polymers PM6 und des NFA Y6 untersucht. Die Erzeugung freier Ladungsträger in PM6:Y6 erweist sich dabei als effizient und unabhängig von elektrischem Feld und Anregungsenergie. Temperaturabhängige Messungen zeigen eine sehr geringe Aktivierungsenergie für die Photostromerzeugung (ca. 6 meV), was auf eine barrierefreie Ladungsträgertrennung hinweist. Theoretische Modellierungen legen nahe, dass Y6-Moleküle große Quadrupolmomente aufweisen, was zu einer Bandverbiegung an der Donor-Akzeptor-Grenzfläche führt und dabei die elektrostatische Coulombsch-Dissoziationsbarriere reduziert. In dieser Hinsicht identifiziert diese Arbeit die schlechte Extraktion freier Ladungen in Konkurrenz zur „nongeminalen“ Rekombination als einen dominanten Verlustprozess in PM6:Y6 Zellen. In weiterer Folge wurden die spektralen Eigenschaften von PM6:Y6-Solarzellen im Hinblick auf den dominanten Prozess der Ladungsträgergenerierung und rekombination untersucht. Es zeigte sich, dass die Photonenemission unter Leerlaufbedingungen fast vollständig auf die Besetzung und Rekombination von Y6-Singlet-Exzitonen zurückgeführt werden kann. Trotzdem trägt der Rekombinationspfad über den Singlett-Zustand nur zu 1 % zur gesamten Rekombination bei, die über den Ladungstransfer-Zustand (CT-state) an der Donor-Akzeptor-Grenzfläche dominiert wird. Weitere V_OC Gewinne sind daher nur zu erwarten, wenn die Dichte und/oder die Rekombinationsrate dieser CT-Zustände erheblich reduziert werden kann. Schließlich wird die Rolle der energetischen Unordnung in NFA-Solarzellen durch den Vergleich von Y6 mit einem strukturverwandten Derivat, genannt N4, untersucht. Untersuchungen zur Schichtmorphologie in Kombination mit Experimenten zum temperaturabhängigen Ladungstransport zeigen eine deutlich geringere strukturelle und energetische Unordnung im Fall des PM6:Y6 Blends. Sowohl für PM6:Y6 als auch für PM6:N4 bestimmt die Unordnung den maximal erreichbaren V_OC, wobei PM6:Y6 von der verbesserten morphologischen Ordnung profitiert. Insgesamt weisen die gewonnenen Erkenntnisse Wege für die Realisierung von NFA-basierten Solarzellen mit noch kleineren V_OC-Verlusten auf. Durch die weitere Reduzierung der „nongeminaten“ Rekombination als auch der energetischen Unordnung sollten in Zukunft organische Solarzellen mit einem Wirkungsgrad von über 20 % möglich werden. T2 - Über die Photogenerierung und Rekombination freier Ladungsträger in organischen Solarzellen mit Nicht-Fulleren-Akzeptoren KW - organic solar cells KW - non-fullerene acceptors KW - free charge generation KW - free charge recombination KW - energetic disorder KW - organic semiconductors KW - energetische Unordnung KW - Generierung freier Ladungsträger KW - freie Ladungsträger Rekombination KW - Nicht-Fulleren-Akzeptoren KW - organische Halbleiter KW - organische Solarzellen Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-558072 ER - TY - JOUR A1 - Perdigón-Toro, Lorena A1 - Le Quang Phuong, A1 - Eller, Fabian A1 - Freychet, Guillaume A1 - Saglamkaya, Elifnaz A1 - Khan, Jafar A1 - Wei, Qingya A1 - Zeiske, Stefan A1 - Kroh, Daniel A1 - Wedler, Stefan A1 - Koehler, Anna A1 - Armin, Ardalan A1 - Laquai, Frederic A1 - Herzig, Eva M. A1 - Zou, Yingping A1 - Shoaee, Safa A1 - Neher, Dieter T1 - Understanding the role of order in Y-series non-fullerene solar cells to realize high open-circuit voltages JF - Advanced energy materials N2 - Non-fullerene acceptors (NFAs) as used in state-of-the-art organic solar cells feature highly crystalline layers that go along with low energetic disorder. Here, the crucial role of energetic disorder in blends of the donor polymer PM6 with two Y-series NFAs, Y6, and N4 is studied. By performing temperature-dependent charge transport and recombination studies, a consistent picture of the shape of the density of state distributions for free charges in the two blends is developed, allowing an analytical description of the dependence of the open-circuit voltage V-OC on temperature and illumination intensity. Disorder is found to influence the value of the V-OC at room temperature, but also its progression with temperature. Here, the PM6:Y6 blend benefits substantially from its narrower state distributions. The analysis also shows that the energy of the equilibrated free charge population is well below the energy of the NFA singlet excitons for both blends and possibly below the energy of the populated charge transfer manifold, indicating a down-hill driving force for free charge formation. It is concluded that energetic disorder of charge-separated states has to be considered in the analysis of the photovoltaic properties, even for the more ordered PM6:Y6 blend. KW - energetic disorder KW - non-fullerene acceptors KW - open-circuit voltage KW - organic solar cells Y1 - 2022 U6 - https://doi.org/10.1002/aenm.202103422 SN - 1614-6832 SN - 1614-6840 VL - 12 IS - 12 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Perottoni, Hélio D. A1 - Limberg, Guilherme A1 - Amarante, João A. S. A1 - Rossi, Silvia A1 - Queiroz, Anna B. A. A1 - Santucci, Rafael M. A1 - Pérez-Villegas, Angeles A1 - Chiappini, Cristina T1 - The unmixed debris of Gaia-Sausage/Enceladus in the form of a pair of halo stellar overdensities JF - Astrophysical journal letters N2 - In the first billion years after its formation, the galaxy underwent several mergers with dwarf satellites of various masses. The debris of Gaia-Sausage/Enceladus (GSE), the galaxy responsible for the last significant merger of the Milky Way, dominates the inner halo and has been suggested to be the progenitor of both the Hercules-Aquila Cloud (HAC) and Virgo Overdensity (VOD). We combine SEGUE, APOGEE, Gaia, and StarHorse distances to characterize the chemodynamical properties and verify the link between HAC, VOD, and GSE. We find that the orbital eccentricity distributions of the stellar overdensities and GSE are comparable. We also find that they have similar, strongly peaked, metallicity distribution functions, reinforcing the hypothesis of common origin. Furthermore, we show that HAC and VOD are indistinguishable from the prototypical GSE population within all chemical-abundance spaces analyzed. All these evidences combined provide a clear demonstration that the GSE merger is the main progenitor of the stellar populations found within these halo overdensities. Y1 - 2022 U6 - https://doi.org/10.3847/2041-8213/ac88d6 SN - 2041-8213 VL - 936 IS - 1 PB - IOP Publishing CY - Bristol ER - TY - JOUR A1 - Petreska, Irina A1 - Pejov, Ljupco A1 - Sandev, Trifce A1 - Kocarev, Ljupčo A1 - Metzler, Ralf T1 - Tuning of the dielectric relaxation and complex susceptibility in a system of polar molecules: a generalised model based on rotational diffusion with resetting JF - Fractal and fractional N2 - The application of the fractional calculus in the mathematical modelling of relaxation processes in complex heterogeneous media has attracted a considerable amount of interest lately. The reason for this is the successful implementation of fractional stochastic and kinetic equations in the studies of non-Debye relaxation. In this work, we consider the rotational diffusion equation with a generalised memory kernel in the context of dielectric relaxation processes in a medium composed of polar molecules. We give an overview of existing models on non-exponential relaxation and introduce an exponential resetting dynamic in the corresponding process. The autocorrelation function and complex susceptibility are analysed in detail. We show that stochastic resetting leads to a saturation of the autocorrelation function to a constant value, in contrast to the case without resetting, for which it decays to zero. The behaviour of the autocorrelation function, as well as the complex susceptibility in the presence of resetting, confirms that the dielectric relaxation dynamics can be tuned by an appropriate choice of the resetting rate. The presented results are general and flexible, and they will be of interest for the theoretical description of non-trivial relaxation dynamics in heterogeneous systems composed of polar molecules. KW - rotational diffusion KW - memory kernel KW - Fokker-Planck equation KW - non-exponential relaxation KW - autocorrelation function KW - complex KW - susceptibility Y1 - 2022 U6 - https://doi.org/10.3390/fractalfract6020088 SN - 2504-3110 VL - 6 IS - 2 PB - MDPI AG, Fractal Fract Editorial Office CY - Basel ER - TY - THES A1 - Piankova, Diana T1 - Electron pair distribution function (ePDF) analysis and advanced transmission electron microscopy (TEM) techniques BT - a perfect tandem to study the evolution of short-range order in materials Y1 - 2022 ER - TY - JOUR A1 - Pietzsch, Annette A1 - Niskanen, Johannes A1 - Vaz da Cruz, Vinicius A1 - Büchner, Robby A1 - Eckert, Sebastian A1 - Fondell, Mattis A1 - Jay, Raphael Martin A1 - Lu, Xingye A1 - McNally, Daniel A1 - Schmitt, Thorsten A1 - Föhlisch, Alexander T1 - Cuts through the manifold of molecular H2O potential energy surfaces in liquid water at ambient conditions JF - Proceedings of the National Academy of Sciences of the United States of America N2 - The fluctuating hydrogen bridge bonded network of liquid water at ambient conditions entails a varied ensemble of the underlying constituting H2O molecular moieties. This is mirrored in a manifold of the H2O molecular potentials. Subnatural line width resonant inelastic X-ray scattering allowed us to quantify the manifold of molecular potential energy surfaces along the H2O symmetric normal mode and the local asymmetric O-H bond coordinate up to 1 and 1.5 angstrom, respectively. The comparison of the single H2O molecular potentials and spectroscopic signatures with the ambient conditions liquid phase H2O molecular potentials is done on various levels. In the gas phase, first principles, Morse potentials, and stepwise harmonic potential reconstruction have been employed and benchmarked. In the liquid phase the determination of the potential energy manifold along the local asymmetric O-H bond coordinate from resonant inelastic X-ray scattering via the bound state oxygen ls to 4a(1) resonance is treated within these frameworks. The potential energy surface manifold along the symmetric stretch from resonant inelastic X-ray scattering via the oxygen 1 s to 2b(2) resonance is based on stepwise harmonic reconstruction. We find in liquid water at ambient conditions H2O molecular potentials ranging from the weak interaction limit to strongly distorted potentials which are put into perspective to established parameters, i.e., intermolecular O-H, H-H, and O-O correlation lengths from neutron scattering. KW - water KW - potential ene rgy surface KW - RIXS Y1 - 2022 U6 - https://doi.org/10.1073/pnas.2118101119 SN - 1091-6490 VL - 119 IS - 28 PB - National Acad. of Sciences CY - Washington, DC ER - TY - JOUR A1 - Poelking, Carl A1 - Benduhn, Johannes A1 - Spoltore, Donato A1 - Schwarze, Martin A1 - Roland, Steffen A1 - Piersimoni, Fortunato A1 - Neher, Dieter A1 - Leo, Karl A1 - Vandewal, Koen A1 - Andrienko, Denis T1 - Open-circuit voltage of organic solar cells BT - interfacial roughness makes the difference JF - Communications physics N2 - Organic photovoltaics (PV) is an energy-harvesting technology that offers many advantages, such as flexibility, low weight and cost, as well as environmentally benign materials and manufacturing techniques. Despite growth of power conversion efficiencies to around 19 % in the last years, organic PVs still lag behind inorganic PV technologies, mainly due to high losses in open-circuit voltage. Understanding and improving open circuit voltage in organic solar cells is challenging, as it is controlled by the properties of a donor-acceptor interface where the optical excitations are separated into charge carriers. Here, we provide an electrostatic model of a rough donor-acceptor interface and test it experimentally on small molecule PV materials systems. The model provides concise relationships between the open-circuit voltage, photovoltaic gap, charge-transfer state energy, and interfacial morphology. In particular, we show that the electrostatic bias generated across the interface reduces the photovoltaic gap. This negative influence on open-circuit voltage can, however, be circumvented by adjusting the morphology of the donor-acceptor interface. Organic solar cells, despite their high power conversion efficiencies, suffer from open circuit voltage losses making them less appealing in terms of applications. Here, the authors, supported with experimental data on small molecule photovoltaic cells, relate open circuit voltage to photovoltaic gap, charge-transfer state energy, and donor-acceptor interfacial morphology. Y1 - 2022 U6 - https://doi.org/10.1038/s42005-022-01084-x SN - 2399-3650 VL - 5 IS - 1 PB - Nature portfolio CY - Berlin ER - TY - JOUR A1 - Pohl, Martin A1 - Macias, Oscar A1 - Coleman, Phaedra A1 - Gordon, Chris T1 - Assessing the impact of hydrogen absorption on the characteristics of the Galactic center excess JF - The astrophysical journal : an international review of spectroscopy and astronomical physics N2 - We present a new reconstruction of the distribution of atomic hydrogen in the inner Galaxy that is based on explicit radiation transport modeling of line and continuum emission and a gas-flow model in the barred Galaxy that provides distance resolution for lines of sight toward the Galactic center. The main benefits of the new gas model are (a) the ability to reproduce the negative line signals seen with the HI4PI survey and (b) the accounting for gas that primarily manifests itself through absorption. We apply the new model of Galactic atomic hydrogen to an analysis of the diffuse gamma-ray emission from the inner Galaxy, for which an excess at a few GeV was reported that may be related to dark matter. We find with high significance an improved fit to the diffuse gamma-ray emission observed with the Fermi-LAT, if our new H i model is used to estimate the cosmic-ray induced diffuse gamma-ray emission. The fit still requires a nuclear bulge at high significance. Once this is included there is no evidence of a dark-matter signal, be it cuspy or cored. But an additional so-called boxy bulge is still favored by the data. This finding is robust under the variation of various parameters, for example, the excitation temperature of atomic hydrogen, and a number of tests for systematic issues. Y1 - 2022 U6 - https://doi.org/10.3847/1538-4357/ac6032 SN - 0004-637X SN - 1538-4357 VL - 929 IS - 2 PB - IOP Publ. Ltd. CY - Bristol ER - TY - JOUR A1 - Poppenhäger, Katja T1 - Helium absorption in exoplanet atmospheres is connected to stellar coronal abundances JF - Monthly notices of the Royal Astronomical Society N2 - Transit observations in the helium triplet around 10 830 Angstrom are a successful tool to study exoplanetary atmospheres and their mass loss. Forming those lines requires ionization and recombination of helium in the exoplanetary atmosphere. This ionization is caused by stellar photons at extreme ultraviolet (EUV) wavelengths; however, no currently active telescopes can observe this part of the stellar spectrum. The relevant part of the stellar EUV spectrum consists of individual emission lines, many of them being formed by iron at coronal temperatures. The stellar iron abundance in the corona is often observed to be depleted for high-activity low-mass stars due to the first ionization potential (FIP) effect. I show that stars with high versus low coronal iron abundances follow different scaling laws that tie together their X-ray emission and the narrow-band EUV flux that causes helium ionization. I also show that the stellar iron to oxygen abundance ratio in the corona can be measured reasonably well from X-ray CCD spectra, yielding similar results to high-resolution X-ray observations. Taking coronal iron abundance into account, the currently observed large scatter in the relationship of EUV irradiation with exoplanetary helium transit depths can be reduced, improving the target selection criteria for exoplanet transmission spectroscopy. In particular, previously puzzling non-detections of helium for Neptunic exoplanets are now in line with expectations from the revised scaling laws. KW - planets and satellites: atmospheres KW - stars: abundances KW - stars: coronae KW - stars: late-type KW - ultraviolet: stars KW - X-rays: stars Y1 - 2022 U6 - https://doi.org/10.1093/mnras/stac507 SN - 0035-8711 SN - 1365-2966 VL - 512 IS - 2 SP - 1751 EP - 1764 PB - Oxford Univ. Press CY - Oxford ER - TY - JOUR A1 - Prol, Fabricio S. A1 - Smirnov, Artem G. A1 - Hoque, M. Mainul A1 - Shprits, Yuri Y. T1 - Combined model of topside ionosphere and plasmasphere derived from radio-occultation and Van Allen Probes data JF - Scientific reports N2 - In the last years, electron density profile functions characterized by a linear dependence on the scale height showed good results when approximating the topside ionosphere. The performance above 800 km, however, is not yet well investigated. This study investigates the capability of the semi-Epstein functions to represent electron density profiles from the peak height up to 20,000 km. Electron density observations recorded by the Van Allen Probes were used to resolve the scale height dependence in the plasmasphere. It was found that the linear dependence of the scale height in the topside ionosphere cannot be directly used to extrapolate profiles above 800 km. We find that the dependence of scale heights on altitude is quadratic in the plasmasphere. A statistical model of the scale heights is therefore proposed. After combining the topside ionosphere and plasmasphere by a unified model, we have obtained good estimations not only in the profile shapes, but also in the Total Electron Content magnitude and distributions when compared to actual measurements from 2013, 2014, 2016 and 2017. Our investigation shows that Van Allen Probes can be merged to radio-occultation data to properly represent the upper ionosphere and plasmasphere by means of a semi-Epstein function. Y1 - 2022 U6 - https://doi.org/10.1038/s41598-022-13302-1 SN - 2045-2322 VL - 12 IS - 1 PB - Macmillan Publishers Limited, part of Springer Nature CY - London ER - TY - THES A1 - Raman Venkatesan, Thulasinath T1 - Tailoring applications-relevant properties in poly(vinylidene fluoride)-based homo-, co- and ter-polymers through modification of their three-phase structure T1 - Maßgeschneiderte anwendungsrelevante Eigenschaften in Homo-, Ko- und Ter-Polymeren auf der Basis von Poly(vinylidenfluorid) durch Modifikation ihrer Dreiphasenstruktur N2 - Poly(vinylidene fluoride) (PVDF)-based homo-, co- and ter-polymers are well-known for their ferroelectric and relaxor-ferroelectric properties. Their semi-crystalline morphology consists of crystalline and amorphous phases, plus interface regions in between, and governs the relevant electro-active properties. In this work, the influence of chemical, thermal and mechanical treatments on the structure and morphology of PVDF-based polymers and on the related ferroelectric/relaxor-ferroelectric properties is investigated. Polymer films were prepared in different ways and subjected to various treatments such as annealing, quenching and stretching. The resulting changes in the transitions and relaxations of the polymer samples were studied by means of dielectric, thermal, mechanical and optical techniques. In particular, the origin(s) behind the mysterious mid-temperature transition (T_{mid}) that is observed in all PVDF-based polymers was assessed. A new hypothesis is proposed to describe the T_{mid} transition as a result of multiple processes taking place within the temperature range of the transition. The contribution of the individual processes to the observed overall transition depends on both the chemical structure of the monomer units and the processing conditions which also affect the melting transition. Quenching results in a decrease of the overall crystallinity and in smaller crystallites. On samples quenched after annealing, notable differences in the fractions of different crystalline phases have been observed when compared to samples that had been slowly cooled. Stretching of poly(vinylidene fluoride-tetrafluoroethylene) (P(VDF-TFE)) films causes an increase in the fraction of the ferroelectric β-phase with simultaneous increments in the melting point (T_m) and the crystallinity (\chi_c) of the copolymer. While an increase in the stretching temperature does not have a profound effect on the amount of the ferroelectric phase, its stability appears to improve. Measurements of the non-linear dielectric permittivity \varepsilon_2^\prime in a poly(vinylidenefluoride-trifluoroethylene-chlorofluoroethylene) (P(VDF-TrFE- CFE)) relaxor-ferroelectric (R-F) terpolymer reveal peaks at 30 and 80 °C that cannot be identified in conventional dielectric spectroscopy. The former peak is associated with T_{mid}\ and may help to understand the non-zero \varepsilon_2^\prime values that are found for the paraelectric terpolymer phase. The latter peak can also be observed during cooling of P(VDF-TrFE) copolymer samples at 100 °C and is due to conduction processes and space-charge polarization as a result of the accumulation of real charges at the electrode-sample interface. Annealing lowers the Curie-transition temperature of the terpolymer as a consequence of its smaller ferroelectric-phase fraction, which by default exists even in terpolymers with relatively high CFE content. Changes in the transition temperatures are in turn related to the behavior of the hysteresis curves observed on differently heat-treated samples. Upon heating, the hysteresis curves evolve from those known for a ferroelectric to those of a typical relaxor-ferroelectric material. Comparing dielectric-hysteresis loops obtained at various temperatures, we find that annealed terpolymer films show higher electric-displacement values and lower coercive fields than the non-annealed samples − irrespective of the measurement temperature − and also exhibit ideal relaxor-ferroelectric behavior at ambient temperatures, which makes them excellent candidates for related applications at or near room temperature. However, non-annealed films − by virtue of their higher ferroelectric activity − show a larger and more stable remanent polarization at room temperature, while annealed samples need to be poled below 0 °C to induce a well-defined polarization. Overall, by modifying the three phases in PVDF-based polymers, it has been demonstrated how the preparation steps and processing conditions can be tailored to achieve the desired properties that are optimal for specific applications. N2 - Homo-, Ko- und Terpolymere auf der Basis von Poly(vinylidenfluorid) (PVDF) sind für ihre ferroelektrischen und relaxor-ferroelektrischen Eigenschaften bekannt. Die teilkristalline Morphologie dieser Fluorpolymere, bestehend aus kristallinen und amorphen sowie den dazwischen liegenden Grenzflächen, bestimmt die relevanten elektroaktiven Eigenschaften. In dieser Arbeit wird der Einfluss chemischer, thermischer und mechanischer Behandlungen auf die Struktur und Morphologie von Polymeren der PVDF-Familie untersucht, die wiederum direkt mit den ferroelektrischen/relaxor-ferroelektrischen Eigenschaften zusammenhängen. Daher wurden Polymerfilme mit verschiedenen Methoden hergestellt und vielfältigen Prozessschritten wie z.B. Tempern, Abschrecken und Recken unterzogen. Die sich daraus ergebenden Veränderungen bei Phasenübergängen und Relaxationen in den Proben wurden mit dielektrischen, thermischen, mechanischen und optischen Verfahren untersucht. Insbesondere wurden die Ursachen für den mysteriösen Übergang bei mittleren Temperaturen (T_{mid}) untersucht, der an allen PVDF-basierten Polymeren beobachtet werden kann. Es wurde eine neue Hypothese aufgestellt, die den T_{mid}-Übergang als Ergebnis mehrerer Prozesse beschreibt, die innerhalb eines Temperaturbereichs mehr oder weniger gleichzeitig ablaufen. Der Beitrag dieser einzelnen Übergänge zum Gesamtübergang hängt sowohl von der chemischen Struktur der Monomereinheiten als auch von den Verarbeitungsbedingungen ab. Die verschiedenen Verarbeitungsbedingungen wirken sich auch auf den Schmelzübergang der Polymere aus. Der Prozess des Abschreckens führt zu einer Abnahme der Gesamtkristallinität mit einer geringeren Kristallitgröße. Bei Proben, die nach dem Tempern abgeschreckt wurden, werden im Vergleich zu Proben, die langsam aus dem getemperten Zustand abgekühlt wurden, bemerkenswerte Unterschiede im Anteil der verschiedenen kristallinen Phasen festgestellt. Das Recken von Poly(vinylidenfluorid-Tetrafluorethylen) (P(VDF-TFE))-Filmen führt zu einem Anstieg des Anteils der ferroelektrischen β-Phase bei gleichzeitiger Erhöhung von Schmelzpunkt (T_m) und Kristallinität (\chi_c) des Kopolymers. Während eine Erhöhung der Strecktemperatur keinen tiefgreifenden Einfluss auf die Menge der ferroelektrischen Phase hat, scheint sich die Stabilität der ferroelektrischen Phase zu verbessern. Messungen der nichtlinearen dielektrischen Dielektrizitätskonstante \varepsilon_2^\prime zeigen in einem relaxor-ferroelektrischen (R-F) Terpolymer aus Poly(vinylidenfluorid-trifluorethylen-chlorfluorethylen) (P(VDF-TrFE- CFE)) Maxima bei 30 und 80 °C, die in der herkömmlichen dielektrischen Spektroskopie nicht identifiziert werden können. Das erste Maximum hängt mit T_{mid}\ zusammen und kann dabei helfen, die von Null verschiedenen \varepsilon_2^\prime-Werte zu verstehen, die an der paraelektrischen Phase des Terpolymers beobachtet werden. Das zweite Maximum kann auch während des Abkühlens von P(VDF-TrFE)-Kopolymerproben bei 100 °C beobachtet werden und ist auf elektrische Leitungsprozesse und Raumladungspolarisationen infolge der Ansammlung von realen Ladungen an den Grenzflächen der Elektroden zum Polymermaterial zurückzuführen. Das Tempern verringert die Curie-Übergangstemperatur des Terpolymers als Folge der Verringerung des ferroelektrischen Phasenanteils, der standardmäßig sogar in Terpolymeren mit relativ hohem CFE-Gehalt vorhanden ist. Die Änderungen der Übergangstemperaturen stehen wiederum im Zusammenhang mit dem Verhalten der Hysteresekurven bei unterschiedlich wärmebehandelten Proben. Während der Erwärmung kommt es zu einer deutlichen Veränderung der Hysteresekurven von einem typisch ferroelektrischen Verhalten hin zu relaxor-ferroelektrischem Verhalten. Vergleicht man die bei verschiedenen Temperaturen beobachteten dielektrischen Hystereseschleifen, so stellt man fest, dass getemperte Terpolymerfilme - unabhängig von der Messtemperatur - höhere dielektrische Verschiebungen und niedrigere Koerzitivfelder aufweisen als nicht getemperte Proben und dass sie auch bei Raumtemperatur ein ideales relaxor-ferroelektrisches Verhalten zeigen, was sie zu ausgezeichneten Kandidaten für Anwendungen in der Nähe der Raumtemperatur macht. Allerdings zeigen nicht getemperte Filme aufgrund ihrer höheren Ferroelektrizität einen höheren und stabilen Wert der remanenten Polarisation bei Raumtemperatur, während getemperte Proben unter 0 °C gepolt werden müssen, um eine eindeutige Polarisation aufzuweisen. Insgesamt konnte gezeigt werden, dass durch die Modifizierung der drei Phasen in PVDF-basierten Polymeren die Präparationsschritte und Verarbeitungsbedingungen so angepasst werden können, dass die gewünschten Eigenschaften für bestimmte Anwendungen optimal sind. KW - PVDF-based polymers KW - structure-property relationships KW - ferroelectric polymers KW - relaxor-ferroelectric polymers KW - mid-temperature transition KW - Polymere auf PVDF-Basis KW - ferroelektrische Polymere KW - Mitteltemperaturübergang KW - Relaxor-ferroelektrische Polymere KW - Struktur-Eigenschafts-Beziehungen Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-549667 ER - TY - JOUR A1 - Raman Venkatesan, Thulasinath A1 - Smykalla, David A1 - Ploss, Bernd A1 - Wübbenhorst, Michael A1 - Gerhard, Reimund T1 - Tuning the relaxor-ferroelectric properties of Poly(vinylidene fluoride-trifluoroethylene-chlorofluoroethylene) Terpolymer films by means of thermally induced micro- and nanostructures JF - Macromolecules : a publication of the American Chemical Society N2 - The effects of thermal processing on the micro- and nanostructural features and thus also on the relaxor-ferroelectric properties of a P(VDF-TrFE-CFE) terpolymer were investigated in detail by means of dielectric experiments, such as dielectric relaxation spectroscopy (DRS), dielectric hysteresis loops, and thermally stimulated depolarization currents (TSDCs). The results were correlated with those obtained from differential scanning calorimetry (DSC), wide-angle X-ray diffraction (WAXD), and Fourier-transform infrared spectroscopy (FTIR). The results from DRS and DSC show that annealing reduces the Curie transition temperature of the terpolymer, whereas the results from WAXD scans and FTIR spectra help to understand the shift in the Curie transition temperatures as a result of reducing the ferroelectric phase fraction, which by default exists even in terpolymers with relatively high CFE contents. In addition, the TSDC traces reveal that annealing has a similar effect on the midtemperature transition by altering the fraction of constrained amorphous phase at the interphase between the crystalline and the amorphous regions. Changes in the transition temperatures are in turn related to the behavior of the hysteresis curves on differently heat-treated samples. During heating, evolution of the hysteresis curves from ferroelectric to relaxor-ferroelectric, first exhibiting single hysteresis loops and then double hysteresis loops near the Curie transition of the sample, is observed. When comparing the dielectric-hysteresis loops obtained at various temperatures, we find that annealed terpolymer films show higher electric-displacement values and lower coercive fields than the nonannealed sample, irrespective of the measurement temperature, and also exhibit ideal relaxor- ferroelectric behavior at ambient temperatures, which makes them excellent candidates for applications at or near room temperature. By tailoring the annealing conditions, it has been shown that the application temperature could be increased by fine tuning the induced micro- and nanostructures. KW - Annealing (metallurgy) KW - Hysteresis KW - Insulators KW - Phase transitions KW - Polarization Y1 - 2022 U6 - https://doi.org/10.1021/acs.macromol.2c00302 SN - 0024-9297 SN - 1520-5835 VL - 55 IS - 13 SP - 5621 EP - 5635 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Raman Venkatesan, Thulasinath A1 - Wübbenhorst, Michael A1 - Gerhard, Reimund T1 - Structure-property relationships in three-phase relaxor-ferroelectric terpolymers JF - Ferroelectrics N2 - Poly(vinylidenefluoride-trifluoroethylene)-based (P(VDF-TrFE)-based) terpolymers represent a new class of electroactive polymer materials that are relaxor-ferroelectric (RF) polymers and that offer unique and attractive property combinations in comparison with conventional ferroelectric polymers. The RF state is achieved by introducing a fluorine-containing termonomer as a "defect" into the ferroelectric P(VDF-TrFE) copolymer, which reduces the interaction between the VDF/TrFE dipoles. The resulting terpolymer exhibits a low Curie transition temperature and small remanent and coercive fields yielding a slim hysteresis loop that is typical for RF materials. Though the macroscopic behavior is similar to RF ceramics, the mechanisms of relaxor ferroelectricity in semi-crystalline polymers are different and not fully understood yet. Structure-property relationships play an important role in RF terpolymers, as they govern the final RF properties. Hence, a review of important characteristics, previous studies and relevant developments of P(VDF-TrFE)-based terfluoropolymers with either chlorofluoroethylene (CFE) or chlorotrifluoroethylene (CTFE) as the termonomer is deemed useful. The role of the termonomer and of its composition, as well as the effects of the processing conditions on the semi-crystalline structure which in turn affects the final RF properties are discussed in detail. In addition, the presence of noteworthy transition(s) in the mid-temperature range and the influence of preparation conditions on those transitions are reviewed. A better understanding of the fundamental aspects affecting the semi-crystalline structures will help to elucidate the nature of RF activity in VDF-based terpolymers and also help to further improve their applications-relevant electroactive properties. KW - Relaxor-ferroelectric (RF) fluoropolymers KW - structure-property KW - relationships KW - Curie transition KW - dielectric hysteresis KW - thermal KW - processing KW - mid-temperature transition(s) Y1 - 2022 U6 - https://doi.org/10.1080/00150193.2021.2014260 SN - 0015-0193 SN - 1563-5112 VL - 586 IS - 1 SP - 60 EP - 81 PB - Routledge, Taylor & Francis Group CY - Abingdon ER - TY - JOUR A1 - Ramos-Larios, Gerardo A1 - Toala, Jesús Alberto A1 - Rodriguez-Gonzalez, Janis B. A1 - Guerrero, Martin A. A1 - Gomez-Gonzalez, Víctor Mauricio Alfonso T1 - Rings and arcs around evolved stars - III. Physical conditions of the ring-like structures in the planetary nebula IC 4406 revealed by MUSE JF - Monthly notices of the Royal Astronomical Society N2 - We present the analysis of Very Large Telescope Multi Unit Spectroscopic Explorer (MUSE) observations of the planetary nebula (PN) IC 4406. MUSE images in key emission lines are used to unveil the presence of at least five ring-like structures north and south of the main nebula of IC4406. MUSE spectra are extracted from the rings to unambiguously assess for the first time in a PN their physical conditions, electron density (n(e)), and temperature (T-e). The rings are found to have similar T-e as the rim of the main nebula, but smaller n(e). Ratios between different ionic species suggest that the rings of IC4406 have a lower ionization state than the main cavity, in contrast to what was suggested for the rings in NGC 6543, the Cat's Eye Nebula. KW - stars: evolution KW - stars: winds, outflows KW - planetary nebulae: general; KW - planetary nebulae: individual: IC4406 Y1 - 2022 U6 - https://doi.org/10.1093/mnras/stac605 SN - 0035-8711 SN - 1365-2966 VL - 513 IS - 2 SP - 2862 EP - 2868 PB - Oxford Univ. Press CY - Oxford ER - TY - JOUR A1 - Rashti, Alireza A1 - Fabbri, Francesco Maria A1 - Brügmann, Bernd A1 - Chaurasia, Swami Vivekanandji A1 - Dietrich, Tim A1 - Ujevic, Maximiliano A1 - Tichy, Wolfgang T1 - New pseudospectral code for the construction of initial data JF - Physical review D N2 - Numerical studies of the dynamics of gravitational systems, e.g., black hole-neutron star systems, require physical and constraint-satisfying initial data. In this article, we present the newly developed pseudospectral code ELLIPTICA, an infrastructure for construction of initial data for various binary and single gravitational systems of all kinds. The elliptic equations under consideration are solved on a single spatial hypersurface of the spacetime manifold. Using coordinate maps, the hypersurface is covered by patches whose boundaries can adapt to the surface of the compact objects. To solve elliptic equations with arbitrary boundary condition, ELLIPTICA deploys a Schur complement domain decomposition method with a direct solver. In this version, we use cubed sphere coordinate maps and the fields are expanded using Chebyshev polynomials of the first kind. Here, we explain the building blocks of ELLIPTICA and the initial data construction algorithm for a black hole-neutron star binary system. We perform convergence tests and evolve the data to validate our results. Within our framework, the neutron star can reach spin values close to breakup with arbitrary direction, while the black hole can have arbitrary spin with dimensionless spin magnitude ∼0.8. Y1 - 2022 U6 - https://doi.org/10.1103/PhysRevD.105.104027 SN - 2470-0010 SN - 2470-0029 VL - 105 IS - 10 PB - American Physical Society CY - College Park ER - TY - JOUR A1 - Regenstein, Wolfgang T1 - Statistische Beschreibung des Resonanzenergietransfers in Lösungen N2 - In resonance energy transfer, photons are transferred from an excited donor to an acceptor over an interaction distance. According to Förster's quantum mechanical theory, this distance can be calculated using the overlap integral of the fluorescence spectrum of the donor and the absorption spectrum of the acceptor. Another possibility of determination is obtained with the help of statistical models, which are compiled in an overview. The distance can be determined by evaluating the extinction curve. In this work, a further statistical variant of the determination of the interaction radius is added and demonstrated in detail using an example. N2 - Beim Resonanzenergietransfer werden Fotonen von einem angeregten Donator über einen Wechselwirkungsabstand auf einen Akzeptor übertragen. Nach der quantenmechanischen Theorie von FÖRSTER kann dieser Abstand mit Hilfe des Überlappungsintegrals von Fluoreszenzspektrum des Donators und Absorp-tionsspektrum des Akzeptors berechnet werden. Eine andere Möglichkeit der Bestimmung erhält man mit Hilfe von statistischen Modellen, die in einem Überblick zusammengestellt sind. Dabei kann der Abstand durch Auswertung der Löschkurve bestimmt werden. In dieser Arbeit wird dazu eine weitere statistische Variante der Bestimmung des Wechselwirkungsradius hinzugefügt und an einem Beispiel ausführlich demonstriert. KW - resonant energy transfer KW - statistical models KW - theory of Förster KW - quenching curve KW - interaction distance KW - Resonanzenergietransfer KW - statistische Modelle KW - Theorie von Förster KW - Löschkurve KW - Wechselwirkungsabstand Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-565009 ER - TY - JOUR A1 - Regenstein, Wolfgang T1 - Statistische Beschreibung des Resonanzenergietransfers in Lösungen N2 - Beim Resonanzenergietransfer werden Fotonen von einem angeregten Donator über einen Wechselwirkungsabstand auf einen Akzeptor übertragen. Nach der quantenmechanischen Theorie von FÖRSTER kann dieser Abstand mit Hilfe des Überlappungsintegrals von Fluoreszenzspektrum des Donators und Absorp-tionsspektrum des Akzeptors berechnet werden. Eine andere Möglichkeit der Bestimmung erhält man mit Hilfe von statistischen Modellen, die in einem Überblick zusammengestellt sind. Dabei kann der Abstand durch Auswertung der Löschkurve bestimmt werden. In dieser Arbeit wird dazu eine weitere statistische Variante der Bestimmung des Wechselwirkungsradius hinzugefügt und an einem Beispiel ausführlich demonstriert. N2 - In resonance energy transfer, photons are transferred from an excited donor to an acceptor over an interaction distance. According to Förster's quantum mechanical theory, this distance can be calculated using the overlap integral of the fluorescence spectrum of the donor and the absorption spectrum of the acceptor. Another possibility of determination is obtained with the help of statistical models, which are compiled in an overview. The distance can be determined by evaluating the extinction curve. In this work, a further statistical variant of the determination of the interaction radius is added and demonstrated in detail using an example. KW - resonant energy transfer KW - statistical models KW - theory of Förster KW - quenching curve KW - interaction distance KW - Resonanzenergietransfer KW - statistische Modelle KW - Theorie von Förster KW - Löschkurve KW - Wechselwirkungsabstand Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-565977 ET - 2. Version ER - TY - JOUR A1 - Riese, Josef A1 - Vogelsang, Christoph A1 - Schröder, Jan A1 - Borowski, Andreas A1 - Kulgemeyer, Christoph A1 - Reinhold, Peter A1 - Schecker, Horst T1 - The development of lesson planning skills in the subject of physics T1 - Entwicklung von Unterrichtsplanungsfähigkeit im Fach Physik BT - What influence does professional knowledge have? BT - Welchen Einfluss hat Professionswissen? JF - Zeitschrift für Erziehungswissenschaft N2 - One main goal of university teacher education is the first acquisition of skills for theory-driven lesson planning. According to models of teachers' professional competence, it is assumed that the acquired professional knowledge represents an essential basis for the development of planning skills. Learning opportunities to apply this professional knowledge often occur in school internships, usually in advanced semesters of teacher education programs. It is also assumed that practical experience within lesson planning supports the formation of professional knowledge. However, the relationship between the extent of professional knowledge and the development of skills to plan a lesson lacks evidence. There is a particular challenge in measuring lesson planning skills both authentically and standardized. To evaluate the mentioned relationship, a longitudinal pre-post-study with prospective physics-teachers (N = 68 in the longitudinal section) was conducted at four German universities. Pre-service physics teachers' skills to plan a lesson were assessed with a standardized performance assessment at the beginning and at the end of a longterm-internship. This assessment consists of planning a physics lesson, conveying Newton's third Law, in a simulated and standardized way with limited time. In addition, content knowledge, pedagogical content knowledge and pedagogical knowledge has been assessed using standardized instruments. Furthermore, additional information about the internship and the amount of learning opportunities was collected at the end of the internship. During the internship, both lesson planning skills and all components of professional knowledge increased. Cross-Lagged-Panel-Analyses reveal that in particular pre-service teachers' pedagogical content knowledge as well as pedagogical knowledge at the beginning of the internship influences the development of lesson planning skills. N2 - Im Lehramtsstudium sollen Studierende grundlegende Fähigkeiten zur theoriegeleiteten Unterrichtsplanung erwerben. In Übereinstimmung mit Modellen zur professionellen Handlungskompetenz von Lehrkräften wird hierbei meist angenommen, dass das im Studienverlauf erworbene Professionswissen eine wesentliche Grundlage für den Aufbau von Fähigkeiten zur Unterrichtsplanung bildet. Lerngelegenheiten zur Anwendung dieses Professionswissens bieten vor allem schulpraktische Phasen im fortgeschrittenen Studienverlauf. Es wird aber ebenso angenommen, dass gerade Erfahrungen mit der Unterrichtsplanung den Aufbau von Professionswissen unterstützen. Der Zusammenhang zwischen dem Ausmaß des Professionswissens und der Entwicklung von Planungsfähigkeit ist bisher unzureichend empirisch geklärt. Eine besondere methodische Herausforderung besteht darin, Planungsfähigkeiten sowohl möglichst authentisch als auch auf standardisierte Weise zu erfassen. Zur Untersuchung des genannten Zusammenhangs wurde eine längsschnittliche Studie im Prä-Post-Design bei angehenden Physiklehrkräften (N = 68 im Längsschnitt) an vier Universitäten durchgeführt. Die Unterrichtsplanungsfähigkeit wurde mit Hilfe eines standardisierten Performanztests vor und nach dem Absolvieren eines Praxissemesters erfasst, indem als Standardsituation der Entwurf einer Unterrichtsstunde zum 3. Newton’schen Axiom unter definierten Zeitvorgaben im Praxissemester simuliert wurde. Zusätzlich wurden das fachliche, fachdidaktische und pädagogische Wissen der Studierenden mit Hilfe standardisierter Instrumente zu beiden Zeitpunkten erhoben, sowie die einschlägigen Lerngelegenheiten im Praxissemester über einen Fragebogen erfasst. Sowohl für Unterrichtsplanungsfähigkeit als auch für alle Wissensvariablen können Zuwächse im Praxissemester beobachtet werden. Cross-Lagged-Panel-Analysen zeigen, dass insbesondere die Ausprägung des fachdidaktischen und pädagogischen Wissens der Studierenden am Beginn des Praxissemesters die Entwicklung von Unterrichtsplanungsfähigkeit begünstigt. KW - teacher education KW - physics KW - lesson planning KW - performance assessment KW - professional knowledge KW - longitudinal study KW - Lehrerbildung KW - Physik KW - Unterrichtsplanung KW - Performanztest KW - Professionswissen KW - Längsschnittstudie Y1 - 2022 U6 - https://doi.org/10.1007/s11618-022-01112-0 SN - 1434-663X SN - 1862-5215 IS - 4 SP - 843 EP - 867 PB - Springer VS/Springer Fachmedien Wiesbaden GmbH CY - Wiesbaden ER - TY - JOUR A1 - Rubio, Gabriel A1 - Toalá, Jesús Alberto A1 - Todt, Helge Tobias A1 - Sabin, Laurence A1 - Santamaría, Edgar A1 - Ramos-Larios, Gerardo A1 - Martín Guerrero, José David T1 - Planetary nebulae with Wolf-Rayet-type central stars - IV. NGC 1501 and its mixing layer JF - Monthly notices of the Royal Astronomical Society N2 - Theory predicts that the temperature of the X-ray-emitting gas (similar to 10(6) K) detected from planetary nebulae (PNe) is a consequence of mixing or thermal conduction when in contact with the ionized outer rim (similar to 10(4) K). Gas at intermediate temperatures (similar to 10(5) K) can be used to study the physics of the production of X-ray-emitting gas, via C iv, N v, and O vi ions. Here, we model the stellar atmosphere of the CSPN of NGC 1501 to demonstrate that even this hot H-deficient [WO4]-type star cannot produce these emission lines by photoionization. We use the detection of the C iv lines to assess the physical properties of the mixing region in this PNe in comparison with its X-ray-emitting gas, rendering NGC 1501 only the second PNe with such characterization. We extend our predictions to the hottest [WO1] and cooler [WC5] spectral types and demonstrate that most energetic photons are absorbed in the dense winds of [WR] CSPN and highly ionized species can be used to study the physics behind the production of hot bubbles in PNe. We found that the UV observations of NGC 2452, NGC 6751, and NGC 6905 are consistent with the presence mixing layers and hot bubbles, providing excellent candidates for future X-ray observations. KW - stars: evolution KW - stars: individual: WD0402+607 KW - stars: winds KW - outflows; KW - stars: Wolf-Rayet KW - planetary nebulae: general KW - planetary nebulae KW - individual: NGC1501 Y1 - 2022 U6 - https://doi.org/10.1093/mnras/stac3011 SN - 0035-8711 SN - 1365-2966 VL - 517 IS - 4 SP - 5166 EP - 5179 PB - Oxford Univ. Press CY - Oxford ER - TY - JOUR A1 - Rüdiger, Günther A1 - Schultz, Manfred T1 - On the toroidal-velocity antidynamo theorem under the presence of nonuniform electric conductivity JF - Astronomische Nachrichten = Astronomical notes N2 - Laminar electrically conducting Couette flows with the hydrodynamically stable quasi-Keplerian rotation profile and nonuniform conductivity are probed for dynamo instability. In spherical geometry, the equations for the poloidal and the toroidal field components completely decouple, resulting in free decay, regardless of the spatial distribution of the electric conductivity. In cylindrical geometry the poloidal and toroidal components do not decouple, but here also we do not find dynamo excitations for the cases that the electric conductivity only depends on the radius or - much more complex- that it only depends on the azimuthal or the axial coordinate. The transformation of the plane-flow dynamo model of Busse and Wicht (1992) to cylindrical or spherical geometry therefore fails. It is also shown that even the inclusion of axial flows of both directions does not support the dynamo mechanism. The Elsasser toroidal-velocity antidynamo theorem, according to which dynamos without any radial velocity component cannot work, is thus not softened by nonuniform conductivity distributions. KW - antidynamo theorem KW - MHD KW - Taylor-Couette flow Y1 - 2022 U6 - https://doi.org/10.1002/asna.20224011 SN - 0004-6337 SN - 1521-3994 VL - 343 IS - 5 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Sachse, Manuel A1 - Kappel, David A1 - Tirsch, Daniela A1 - Otto, Katharina A. T1 - Discrete element modeling of aeolian-like morphologies on comet 67P/Churyumov-Gerasimenko JF - Astronomy and astrophysics : an international weekly journal N2 - Context. Even after the Rosetta mission, some of the mechanical parameters of comet 67P/Churyumov-Gerasimenko's surface material are still not well constrained. They are needed to improve our understanding of cometary activity or for planning sample return procedures. Aims. We discuss the physical process dominating the formation of aeolian-like surface features in the form of moats and wind taillike bedforms around obstacles and investigate the mechanical and geometrical parameters involved. Methods. By applying the discrete element method (DEM) in a low-gravity environment, we numerically simulated the dynamics of the surface layer particles and the particle stream involved in the formation of aeolian-like morphological features. The material is composed of polydisperse spherical particles that consist of a mixture of dust and water ice, with interparticle forces given by the Hertz contact model, cohesion, friction, and rolling friction. We determined a working set of parameters that enables simulations to be reasonably realistic and investigated morphological changes when modifying these parameters. Results. The aeolian-like surface features are reasonably well reproduced using model materials with a tensile strength on the order of 0.1-1 Pa. Stronger materials and obstacles with round shapes impede the formation of a moat and a wind tail. The integrated dust flux required for the formation of moats and wind tails is on the order of 100 kg m(-2), which, based on the timescale of morphological changes inferred from Rosetta images, translates to a near-surface particle density on the order of 10(-6)-10(-4) kg m(-3). Conclusions. DEM modeling of the aeolian-like surface features reveals complex formation mechanisms that involve both deposition of ejected material and surface erosion. More numerical work and additional in situ measurements or sample return missions are needed to better investigate mechanical parameters of cometary surface material and to understand the mechanics of cometary activity. KW - comets: general KW - comets: individual: 67P/Churyumov-Gerasimenko KW - methods: numerical Y1 - 2022 U6 - https://doi.org/10.1051/0004-6361/202141296 SN - 0004-6361 SN - 1432-0746 VL - 662 PB - EDP Sciences CY - Les Ulis ER - TY - JOUR A1 - Sajedi, Maryam A1 - Krivenkov, Maxim A1 - Marchenko, Dmitry A1 - Sanchez-Barriga, Jaime A1 - Chandran, Anoop K. A1 - Varykhalov, Andrei A1 - Rienks, Emile D. L. A1 - Aguilera, Irene A1 - Blügel, Stefan A1 - Rader, Oliver T1 - Is there a polaron signature in Angle-Resolved Photoemission of CsPbBr3? JF - Physical review letters N2 - The formation of large polarons has been proposed as reason for the high defect tolerance, low mobility, low charge carrier trapping, and low nonradiative recombination rates of lead halide perovskites. Recently, direct evidence for large-polaron formation has been reported from a 50% effective mass enhancement in angle-resolved photoemission of CsPbBr3 over theory for the orthorhombic structure. We present in-depth band dispersion measurements of CsPbBr3 and GW calculations, which lead to similar effective masses at the valence band maximum of 0.203 1 0.016 m0 in experiment and 0.226 m0 in orthorhombic theory. We argue that the effective mass can be explained solely on the basis of electron-electron correlation and largepolaron formation cannot be concluded from photoemission data. Y1 - 2022 U6 - https://doi.org/10.1103/PhysRevLett.128.176405 SN - 0031-9007 SN - 1079-7114 VL - 128 IS - 17 PB - American Physical Society CY - College Park ER - TY - JOUR A1 - Sandev, Trifce A1 - Domazetoski, Viktor A1 - Kocarev, Ljupco A1 - Metzler, Ralf A1 - Chechkin, Aleksei T1 - Heterogeneous diffusion with stochastic resetting JF - Journal of physics : A, Mathematical and theoretical N2 - We study a heterogeneous diffusion process (HDP) with position-dependent diffusion coefficient and Poissonian stochastic resetting. We find exact results for the mean squared displacement and the probability density function. The nonequilibrium steady state reached in the long time limit is studied. We also analyse the transition to the non-equilibrium steady state by finding the large deviation function. We found that similarly to the case of the normal diffusion process where the diffusion length grows like t (1/2) while the length scale xi(t) of the inner core region of the nonequilibrium steady state grows linearly with time t, in the HDP with diffusion length increasing like t ( p/2) the length scale xi(t) grows like t ( p ). The obtained results are verified by numerical solutions of the corresponding Langevin equation. KW - heterogeneous diffusion KW - Fokker-Planck equation KW - Langevin equation KW - stochastic resetting KW - nonequilibrium stationary state KW - large deviation function Y1 - 2022 U6 - https://doi.org/10.1088/1751-8121/ac491c SN - 1751-8113 SN - 1751-8121 VL - 55 IS - 7 PB - IOP Publ. Ltd. CY - Bristol ER - TY - JOUR A1 - Sarabadani, Jalal A1 - Metzler, Ralf A1 - Ala-Nissila, Tapio T1 - Driven polymer translocation into a channel: Isoflux tension propagation theory and Langevin dynamics simulations JF - Physical Review Research N2 - Isoflux tension propagation (IFTP) theory and Langevin dynamics (LD) simulations are employed to study the dynamics of channel-driven polymer translocation in which a polymer translocates into a narrow channel and the monomers in the channel experience a driving force fc. In the high driving force limit, regardless of the channel width, IFTP theory predicts τ ∝ f βc for the translocation time, where β = −1 is the force scaling exponent. Moreover, LD data show that for a very narrow channel fitting only a single file of monomers, the entropic force due to the subchain inside the channel does not play a significant role in the translocation dynamics and the force exponent β = −1 regardless of the force magnitude. As the channel width increases the number of possible spatial configurations of the subchain inside the channel becomes significant and the resulting entropic force causes the force exponent to drop below unity. Y1 - 2022 U6 - https://doi.org/10.1103/PhysRevResearch.4.033003 SN - 2643-1564 VL - 4 SP - 033003-1 EP - 033003-14 PB - American Physical Society CY - College Park, Maryland, USA ET - 3 ER - TY - GEN A1 - Sarabadani, Jalal A1 - Metzler, Ralf A1 - Ala-Nissila, Tapio T1 - Driven polymer translocation into a channel: Isoflux tension propagation theory and Langevin dynamics simulations T2 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Isoflux tension propagation (IFTP) theory and Langevin dynamics (LD) simulations are employed to study the dynamics of channel-driven polymer translocation in which a polymer translocates into a narrow channel and the monomers in the channel experience a driving force fc. In the high driving force limit, regardless of the channel width, IFTP theory predicts τ ∝ f βc for the translocation time, where β = −1 is the force scaling exponent. Moreover, LD data show that for a very narrow channel fitting only a single file of monomers, the entropic force due to the subchain inside the channel does not play a significant role in the translocation dynamics and the force exponent β = −1 regardless of the force magnitude. As the channel width increases the number of possible spatial configurations of the subchain inside the channel becomes significant and the resulting entropic force causes the force exponent to drop below unity. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1292 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-574387 SN - 1866-8372 IS - 1292 SP - 033003-1 EP - 033003-14 ER - TY - JOUR A1 - Schaerer, Daniel A1 - Izotov, Yuri I. A1 - Worseck, Gábor A1 - Berg, Danielle A1 - Chisholm, John A1 - Jaskot, Anne A1 - Nakajima, Kimihiko A1 - Ravindranath, Swara A1 - Thuan, Trinh X. A1 - Verhamme, Anne T1 - Strong Lyman continuum emitting galaxies show intense C IV λ 1550 emission JF - Astronomy and astrophysics N2 - Using the Space Telescope Imaging Spectrograph, we have obtained ultraviolet spectra from similar to 1200 to 2000 angstrom of known Lyman continuum (LyC) emitting galaxies at low redshift (z similar to 0.3-0.4) with varying absolute LyC escape fractions ( f(esc) similar to 0.01-0.72). Our observations include in particular the galaxy J1243+4646, which has the highest known LyC escape fraction at low redshift. While all galaxies are known Lyman alpha emitters, we consistently detect an inventory of additional emission lines, including C IV lambda 1550, He II lambda 1640, O III] lambda 1666, and C III] lambda 1909, whose origin is presumably essentially nebular. C IV lambda 1550 emission is detected above 4 sigma in six out of eight galaxies, with equivalent widths of EW(C IV) = 12-15 angstrom for two galaxies, which exceeds the previously reported maximum emission in low-z star-forming galaxies. We detect C IV lambda 1550 emission in all LyC emitters with escape fractions f(esc) > 0.1 and find a tentative increase in the flux ratio C IV lambda 1550 /C III] lambda 1909 with f(esc). Based on the data, we propose a new criterion to select and classify strong leakers (galaxies with f(esc) > 0.1): C IV lambda 1550 /C III] lambda 1909 greater than or similar to 0.75. Finally, we also find He II lambda 1640 emission in all the strong leakers with equivalent widths from 3 to 8 angstrom rest frame. These are among the highest values observed in star-forming galaxies and are primarily due to a high rate of ionizing photon production. The nebular He II lambda 1640 emission of the strong LyC emitters does not require harder ionizing spectra at >54 eV compared to those of typical star-forming galaxies at similarly low metallicity. KW - galaxies: starburst KW - galaxies: high-redshift KW - dark ages, reionization KW - first stars KW - ultraviolet: galaxies Y1 - 2022 U6 - https://doi.org/10.1051/0004-6361/202243149 SN - 0004-6361 SN - 1432-0746 VL - 658 PB - EDP Sciences CY - Les Ulis ER - TY - JOUR A1 - Schaffenroth, Veronika A1 - Pelisoli, Ingrid A1 - Barlow, Brad N. A1 - Geier, Stephan A1 - Kupfer, Thomas T1 - Hot subdwarfs in close binaries observed from space I. BT - orbital, atmospheric, and absolute parameters and the nature of their companions JF - Astronomy and astrophysics : an international weekly journal N2 - Context: About a third of the hot subdwarfs of spectral type B (sdBs), which are mostly core-helium-burning objects on the extreme horizontal branch, are found in close binaries with cool, low-mass stellar, substellar, or white dwarf companions. They can show light variations due to di fferent phenomena. Aims: Many hot subdwarfs now have space-based light curves with a high signal-to-noise ratio available. We used light curves from the Transiting Exoplanet Survey Satellite and the K2 space mission to look for more sdB binaries. Their light curves can be used to study the hot subdwarf primaries and their companions, and obtained orbital, atmospheric, and absolute parameters for those systems, when combined with other analysis methods. Methods: By classifying the light variations and combining these with the fit of the spectral energy distribution, the distance derived by the parallaxes obtained by Gaia, and the atmospheric parameters, mainly from the literature, we could derive the nature of the primaries and secondaries in 122 (75%) of the known sdB binaries and 82 newly found reflection e ffect systems. We derived absolute masses, radii, and luminosities for a total of 39 hot subdwarfs with cool, low-mass companions, as well 29 known and newly found sdBs with white dwarf companions. Results: The mass distribution of hot subdwarfs with cool, low-mass stellar and substellar companions, di ffers from those with white dwarf companions, implying they come from di fferent populations. By comparing the period and minimum companion mass distributions, we find that the reflection e ffect systems all have M dwarf or brown dwarf companions, and that there seem to be several di fferent populations of hot subdwarfs with white dwarf binaries - one with white dwarf minimum masses around 0.4 M-circle dot, one with longer periods and minimum companion masses up to 0.6 M-circle dot, and at the shortest period, another with white dwarf minimum masses around 0.8 M-circle dot. We also derive the first orbital period distribution for hot subdwarfs with cool, low-mass stellar or substellar systems selected from light variations instead of radial velocity variations. It shows a narrower period distribution, from 1.5 h to 35 h, compared to the distribution of hot subdwarfs with white dwarfs, which ranges from 1 h to 30 days. These period distributions can be used to constrain the previous common-envelope phase. KW - binaries: close KW - subdwarfs KW - white dwarfs KW - stars: late-type KW - stars: KW - horizontal-branch KW - stars: fundamental parameters Y1 - 2022 U6 - https://doi.org/10.1051/0004-6361/202244214 SN - 0004-6361 SN - 1432-0746 VL - 666 PB - EDP Sciences CY - Les Ulis ER - TY - THES A1 - Schemenz, Victoria T1 - Correlations between osteocyte lacuno-canalicular network and material characteristics in bone adaptation and regeneration T1 - Korrelationen zwischen dem lakuno-kanalikulären Netzwerk der Osteozyten und Materialeigenschaften bei der Knochenanpassung und -regeneration N2 - The complex hierarchical structure of bone undergoes a lifelong remodeling process, where it adapts to mechanical needs. Hereby, bone resorption by osteoclasts and bone formation by osteoblasts have to be balanced to sustain a healthy and stable organ. Osteocytes orchestrate this interplay by sensing mechanical strains and translating them into biochemical signals. The osteocytes are located in lacunae and are connected to one another and other bone cells via cell processes through small channels, the canaliculi. Lacunae and canaliculi form a network (LCN) of extracellular spaces that is able to transport ions and enables cell-to-cell communication. Osteocytes might also contribute to mineral homeostasis by direct interactions with the surrounding matrix. If the LCN is acting as a transport system, this should be reflected in the mineralization pattern. The central hypothesis of this thesis is that osteocytes are actively changing their material environment. Characterization methods of material science are used to achieve the aim of detecting traces of this interaction between osteocytes and the extracellular matrix. First, healthy murine bones were characterized. The properties analyzed were then compared with three murine model systems: 1) a loading model, where a bone of the mouse was loaded during its life time; 2) a healing model, where a bone of the mouse was cut to induce a healing response; and 3) a disease model, where the Fbn1 gene is dysfunctional causing defects in the formation of the extracellular tissue. The measurement strategy included routines that make it possible to analyze the organization of the LCN and the material components (i.e., the organic collagen matrix and the mineral particles) in the same bone volumes and compare the spatial distribution of different data sets. The three-dimensional network architecture of the LCN is visualized by confocal laser scanning microscopy (CLSM) after rhodamine staining and is then subsequently quantified. The calcium content is determined via quantitative backscattered electron imaging (qBEI), while small- and wide-angle X-ray scattering (SAXS and WAXS) are employed to determine the thickness and length of local mineral particles. First, tibiae cortices of healthy mice were characterized to investigate how changes in LCN architecture can be attributed to interactions of osteocytes with the surrounding bone matrix. The tibial mid-shaft cross-sections showed two main regions, consisting of a band with unordered LCN surrounded by a region with ordered LCN. The unordered region is a remnant of early bone formation and exhibited short and thin mineral particles. The surrounding, more aligned bone showed ordered and dense LCN as well as thicker and longer mineral particles. The calcium content was unchanged between the two regions. In the mouse loading model, the left tibia underwent two weeks of mechanical stimulation, which results in increased bone formation and decreased resorption in skeletally mature mice. Here the specific research question addressed was how do bone material characteristics change at (re)modeling sites? The new bone formed in response to mechanical stimulation showed similar properties in terms of the mineral particles, like the ordered calcium region but lower calcium content compared to the right, non-loaded control bone of the same mice. There was a clear, recognizable border between mature and newly formed bone. Nevertheless, some canaliculi went through this border connecting the LCN of mature and newly formed bone. Additionally, the question should be answered whether the LCN topology and the bone matrix material properties adapt to loading. Although, mechanically stimulated bones did not show differences in calcium content compared to controls, different correlations were found between the local LCN density and the local Ca content depending on whether the bone was loaded or not. These results suggest that the LCN may serve as a mineral reservoir. For the healing model, the femurs of mice underwent an osteotomy, stabilized with an external fixator and were allowed to heal for 21 days. Thus, the spatial variations in the LCN topology with mineral properties within different tissue types and their interfaces, namely calcified cartilage, bony callus and cortex, could be simultaneously visualized and compared in this model. All tissue types showed structural differences across multiple length scales. Calcium content increased and became more homogeneous from calcified cartilage to bony callus to lamellar cortical bone. The degree of LCN organization increased as well, while the lacunae became smaller, as did the lacunar density between these different tissue types that make up the callus. In the calcified cartilage, the mineral particles were short and thin. The newly formed callus exhibited thicker mineral particles, which still had a low degree of orientation. While most of the callus had a woven-like structure, it also served as a scaffold for more lamellar tissue at the edges. The lamelar bone callus showed thinner mineral particles, but a higher degree of alignment in both, mineral particles and the LCN. The cortex showed the highest values for mineral length, thickness and degree of orientation. At the same time, the lacunae number density was 34% lower and the lacunar volume 40% smaller compared to bony callus. The transition zone between cortical and callus regions showed a continuous convergence of bone mineral properties and lacunae shape. Although only a few canaliculi connected callus and the cortical region, this indicates that communication between osteocytes of both tissues should be possible. The presented correlations between LCN architecture and mineral properties across tissue types may suggest that osteocytes have an active role in mineralization processes of healing. A mouse model for the disease marfan syndrome, which includes a genetic defect in the fibrillin-1 gene, was investigated. In humans, Marfan syndrome is characterized by a range of clinical symptoms such as long bone overgrowth, loose joints, reduced bone mineral density, compromised bone microarchitecture, and increased fracture rates. Thus, fibrillin-1 seems to play a role in the skeletal homeostasis. Therefore, the present work studied how marfan syndrome alters LCN architecture and the surrounding bone matrix. The mice with marfan syndrome showed longer tibiae than their healthy littermates from an age of seven weeks onwards. In contrast, the cortical development appeared retarded, which was observed across all measured characteristics, i. e. lower endocortical bone formation, looser and less organized lacuno-canalicular network, less collagen orientation, thinner and shorter mineral particles. In each of the three model systems, this study found that changes in the LCN architecture spatially correlated with bone matrix material parameters. While not knowing the exact mechanism, these results provide indications that osteocytes can actively manipulate a mineral reservoir located around the canaliculi to make a quickly accessible contribution to mineral homeostasis. However, this interaction is most likely not one-sided, but could be understood as an interplay between osteocytes and extra-cellular matrix, since the bone matrix contains biochemical signaling molecules (e.g. non-collagenous proteins) that can change osteocyte behavior. Bone (re)modeling can therefore not only be understood as a method for removing defects or adapting to external mechanical stimuli, but also for increasing the efficiency of possible osteocyte-mineral interactions during bone homeostasis. With these findings, it seems reasonable to consider osteocytes as a target for drug development related to bone diseases that cause changes in bone composition and mechanical properties. It will most likely require the combined effort of materials scientists, cell biologists, and molecular biologists to gain a deeper understanding of how bone cells respond to their material environment. N2 - Knochen haben eine komplexe hierarchische Struktur, die einen lebenslangen Umbauprozess durchläuft, bei dem der Knochen sich seinen mechanischen Anforderungen anpasst. Um ein gesundes und stabiles Organ zu erhalten müssen Knochenresorption (durch Osteoklasten) und Knochenbildung (durch Osteoblasten) ausgewogen sein. Osteozyten lenken dieses Wechselspiel, indem sie mechanische Belastungen wahrnehmen und sie in biochemische Signale übersetzen. Die Osteozyten sitzen in Lakunen und sind durch Kanälchen untereinander und mit anderen Knochenzellen über ein Netzwerk (LCN) verbunden, das in der Lage ist, Ionen zu transportieren und eine Kommunikation von Zelle zu Zelle zu ermöglichen. Außerdem vermutet man, dass Osteozyten auch durch direkte Wechselwirkungen mit der umgebenden Matrix zur Mineralhomöostase beitragen könnten. Im Mittelpunkt dieser Arbeit steht die Frage, ob Osteozyten ihre materielle Umgebung aktiv verändern können. Um Spuren dieser Wechselwirkung zwischen Osteozyten und der extrazellulären Matrix nachzuweisen, werden materialwissenschaftliche Charakterisierungsmethoden eingesetzt. Zunächst wurden gesunde Mäuseknochen charakterisiert. Die erworbenen Ergebnisse wurden dann mit drei murinen Modellsystemen verglichen: 1) einem Belastungsmodell; 2) ein Heilungsmodell und 3) ein Krankheitsmodell, bei dem das Fbn1-Gen dysfunktional ist und Defekte in der Bildung des extrazellulären Gewebes verursacht werden. Die Messstrategie umfasste Routinen, die es ermöglichen, die Organisation des LCN und der Materialkomponenten (d.h. die organische Kollagenmatrix und die mineralischen Partikel) in denselben Knochenvolumina zu analysieren und die räumliche Verteilung der verschiedenen Datensätze zu vergleichen. Die dreidimensionale Netzwerkarchitektur des LCN wird durch konfokale Laser-Scanning-Mikroskopie nach Rhodamin-Färbung gemessen und anschließend quantifiziert. Der Kalziumgehalt wird mittels quantitativer Rückstreuelektronenbildgebung bestimmt, während Klein- und Weitwinkel-Röntgenstreuung verwendet werden, um die Dicke und Länge der Mineralpartikel zu bestimmen. Zunächst wurden Querschnitte der Unterschenkel von gesunden Mäusen charakterisiert, um zu untersuchen, ob Veränderungen in der LCN-Architektur auf Wechselwirkungen von Osteozyten mit der umgebenden Knochenmatrix zurückgeführt werden können. Die Kortizes zeigten zwei Hauptregionen, ein Band mit ungeordneter LCN-Architektur, umgeben von einer Region mit geordneter LCN. Die ungeordnete Region ist ein Überbleibsel der frühen Knochenbildung und wies kurze und dünne Mineralpartikel auf. Der umgebende, stärker ausgerichtete Knochen zeigte ein geordnetes und dichtes LCN, sowie dickere und längere Mineralpartikel. Der Kalziumgehalt blieb bei beiden Regionen unverändert. Im Mausbelastungsmodell wurde das linke Schienbein zwei Wochen lang mechanisch stimuliert, was zu einer erhöhten Knochenbildung führt. Hier sollte die Forschungsfrage beantwortet werden, wie sich Knochenmaterialeigenschaften an (Re-)Modellierungsstellen aufgrund von Belastung ändern. Der, als Reaktion auf die mechanische Stimulation, gebildete neue Knochen zeigte ähnliche Eigenschaften in Bezug auf die Mineralpartikel, wie die geordnete Kortexregion. Es gab eine klar erkennbare Grenze zwischen reifem und neu gebildetem Knochen. Trotzdem gingen einige Kanälchen durch diese Grenze, die die LCN aus reifem und neu gebildetem Knochen verband. Für das Heilungsmodell wurden die Oberschenkel von Mäusen einer Osteotomie unterzogen (einer Operation, bei der durch einen Schnitt in der Diaphyse ein Bruch erzeugt wird). Danach konnte die Fraktur 21 Tage heilen. Dadurch konnten in diesem Modell gleichzeitig verkalkter Knorpel, knöcherner Kallus und Kortex untersucht werden. Dafür wurde die räumliche Verteilung der LCN-Topologie sowie die Mineraleigenschaften der verschiedenen Gewebetypen und ihrer Grenzflächen visualisiert und verglichen. Alle Gewebetypen zeigten strukturelle Unterschiede über mehrere Längenskalen hinweg. Der Kalziumgehalt nahm von kalzifiziertem Knorpel zu knöchernem Kallus zu lamellarem kortikalem Knochen zu und wurde homogener. Der Grad der LCN-Organisation nahm ebenfalls zu, während die Lakunen vom Kallus zum Kortexgewebe kleiner wurden, ebenso wie die Lakunendichte. Im verkalkten Knorpel waren die Mineralpartikel kurz und dünn. Der größte Teil des Kallus wies eine Geflechtsknochenstruktur auf und diente als Gerüst für lamellares Gewebe, das dünnere Mineralpartikel, aber einen höheren Grad an Ausrichtung sowohl in den Mineralpartikeln als auch im LCN aufwies. Der Kortex zeigte die höchsten Werte für Minerallänge, Dicke und Orientierungsgrad. Obwohl nur wenige Kanälchen den Kallus und kortikale Regionen verbinden, weist dies darauf hin, dass eine Kommunikation zwischen Osteozyten beider Gewebe möglich sein sollte. Es wurde auch ein Mausmodell für das Marfan-Syndrom untersucht, das einen Gendefekt im Fibrillin-1-Gen beinhaltet. Beim Menschen ist das Marfan-Syndrom durch eine Reihe klinischer Symptome gekennzeichnet, wie z. B. übermäßiges Wachstum der Gliedmaßen, überstreckbare Gelenke, verringerte Knochenmineraldichte, beeinträchtigte Knochenmikroarchitektur und erhöhte Frakturraten. Somit scheint Fibrillin-1 eine Rolle in der Skeletthomöostase zu spielen. Deswegen untersuchte die vorliegende Arbeit, ob und wie das Marfan-Syndrom die LCN-Architektur und die umgebende Knochenmatrix verändert. Die Mäuse mit Marfan-Syndrom zeigten bereits ab einem Alter von sieben Wochen längere Schienbeine als ihre gesunden Wurfgeschwister. Im Gegensatz dazu erschien die kortikale Entwicklung verzögert, was über alle gemessenen Merkmale hinweg beobachtet wurde, d.h. niedrigere endokortikale Knochenbildung, lockereres und weniger organisiertes LCN, geringerer Grad an Kollagenorientierung sowie ein Trend zu dünneren und kürzeren Mineralpartikel. In jedem der drei Modellsysteme fand diese Studie, dass Änderungen in der LCN-Architektur räumlich mit Parametern des Knochenmatrixmaterials korrelierten. Obwohl der genaue Mechanismus nicht bekannt ist, liefern diese Ergebnisse Hinweise darauf, dass Osteozyten ein Mineralreservoir aktiv manipulieren können. Dieses Reservoir befindet sich um die Kanälchen herum und dieser Prozess würde es ermöglichen, einen schnell zugänglichen Beitrag zur Mineralhomöostase zu leisten. Diese Interaktion ist jedoch höchstwahrscheinlich nicht einseitig, sondern könnte als Wechselspiel zwischen Osteozyten und extrazellulärer Matrix verstanden werden, da die Knochenmatrix biochemische Signalmoleküle enthält, die das Verhalten von Osteozyten verändern können. Knochen(re)modellierung kann daher nicht nur als Methode zur Defektbeseitigung oder Anpassung an äußere mechanische Reize verstanden werden, sondern auch zur Effizienzsteigerung möglicher Osteozyten-Mineral-Interaktionen während der Knochenhomöostase. Angesichts dieser Ergebnisse erscheint es sinnvoll, Osteozyten als Ziel für die Arzneimittelentwicklung im Zusammenhang mit Knochenerkrankungen in Betracht zu ziehen, die Veränderungen der Knochenzusammensetzung und deren mechanischen Eigenschaften verursachen. KW - bone KW - lacunae KW - mineralization KW - SAXS KW - lacuno-canalicular network KW - µCT KW - CLSM KW - konfokales Laser-Scanning-Mikroskop KW - Kleinwinkelröntgenstreuung KW - Knochen KW - Lakunen KW - lakuno-kanaliculäres Netzwerk KW - Mineralisierung KW - µCT Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-559593 ER - TY - THES A1 - Schlemm, Tanja T1 - The marine ice cliff instability of the Antarctic ice sheet T1 - Die marine Eisklippeninstabilität des antarktischen Eisschildes BT - a theory of mélange-buttressed cliff calving and its application in the Parallel Ice Sheet Model BT - eine Theorie des Mélange-gebremsten Klippenkalbens und ihre Anwendung im Parallel Ice Sheet Model N2 - The Antarctic ice sheet is the largest freshwater reservoir worldwide. If it were to melt completely, global sea levels would rise by about 58 m. Calculation of projections of the Antarctic contribution to sea level rise under global warming conditions is an ongoing effort which yields large ranges in predictions. Among the reasons for this are uncertainties related to the physics of ice sheet modeling. These uncertainties include two processes that could lead to runaway ice retreat: the Marine Ice Sheet Instability (MISI), which causes rapid grounding line retreat on retrograde bedrock, and the Marine Ice Cliff Instability (MICI), in which tall ice cliffs become unstable and calve off, exposing even taller ice cliffs. In my thesis, I investigated both marine instabilities (MISI and MICI) using the Parallel Ice Sheet Model (PISM), with a focus on MICI. N2 - Der antarktische Eisschild ist das größte Süßwasserreservoir der Welt. Würde er vollständig schmelzen, würde der globale Meeresspiegel um etwa 58 m ansteigen. Die Ermittlung von Prognosen über den Beitrag der Antarktis zum Anstieg des Meeresspiegels infolge der globalen Erwärmung ist ein fortlaufender Prozess, der große Unterschiede in den Vorhersagen zur Folge hat. Einer der Gründe dafür sind Ungewissheiten im Zusammenhang mit der Physik der Eisschildmodellierung. Zu diesen Unsicherheiten gehören zwei Prozesse, die zu einem unkontrollierten Eisrückzug führen könnten: die Marine Ice Sheet Instability (MISI), die zu einem schnellen Rückzug der Grundlinie auf rückläufigem Grundgestein führt, und die Marine Ice Cliff Instability (MICI), bei der hohe Eisklippen instabil werden und abkalben, wodurch noch höhere Eisklippen freigelegt werden. In meiner Dissertation untersuchte ich beide marinen Instabilitäten (MISI und MICI) mit Hilfe des Parallel Ice Sheet Model (PISM), wobei der Schwerpunkt auf MICI lag. KW - Antarctica KW - ice sheet modelling KW - iceberg calving KW - Antarktis KW - Eisschildmodellierung KW - Eisbergkalbung Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-586333 ER - TY - JOUR A1 - Schlemm, Tanja A1 - Feldmann, Johannes A1 - Winkelmann, Ricarda A1 - Levermann, Anders T1 - Stabilizing effect of melange buttressing on the marine ice-cliff instability of the West Antarctic Ice Sheet JF - The Cryosphere : TC ; an interactive open access journal of the European Geosciences Union N2 - Owing to global warming and particularly high regional ocean warming, both Thwaites and Pine Island Glaciers in the Amundsen region of the Antarctic Ice Sheet could lose their buttressing ice shelves over time. We analyse the possible consequences using the parallel ice sheet model (PISM), applying a simple cliff-calving parameterization and an ice melange-buttressing model. We find that the instantaneous loss of ice-shelf buttressing, due to enforced ice-shelf melting, initiates grounding-line retreat and triggers marine ice sheet instability (MISI). As a consequence, the grounding line progresses into the interior of the West Antarctic Ice Sheet and leads to a sea level contribution of 0.6 m within 100 a. By subjecting the exposed ice cliffs to cliff calving using our simplified parameterization, we also analyse marine ice cliff instability (MICI). In our simulations it can double or even triple the sea level contribution depending on the only loosely constrained parameter that determines the maximum cliff-calving rate. The speed of MICI depends on this upper bound of the calving rate, which is given by the ice melange buttressing the glacier. However, stabilization of MICI may occur for geometric reasons. Because the embayment geometry changes as MICI advances into the interior of the ice sheet, the upper bound on calving rates is reduced and the progress of MICI is slowed down. Although we cannot claim that our simulations bear relevant quantitative estimates of the effect of ice-melange buttressing on MICI, the mechanism has the potential to stop the instability. Further research is needed to evaluate its role for the past and future evolution of the Antarctic Ice Sheet. Y1 - 2022 U6 - https://doi.org/10.5194/tc-16-1979-2022 SN - 1994-0416 SN - 1994-0424 VL - 16 IS - 5 SP - 1979 EP - 1996 PB - Copernicus CY - Göttingen ER - TY - JOUR A1 - Schmidt, Thomas A1 - Cioni, Maria-Rosa L. A1 - Niederhofer, Florian A1 - Bekki, Kenji A1 - Bell, Cameron P. M. A1 - de Grijs, Richard A1 - El Youssoufi, Dalal A1 - Ivanov, Valentin D. A1 - Oliveira, Joana M. A1 - Ripepi, Vincenzo A1 - van Loon, Jacco Th. T1 - The VMC survey: XLV. Proper motion of the outer LMC and the impact of the SMC JF - Astronomy and astrophysics N2 - Context. The Large Magellanic Cloud (LMC) is the most luminous satellite galaxy of the Milky Way and, owing to its companion, the Small Magellanic Cloud (SMC), represents an excellent laboratory to study the interaction of dwarf galaxies. Aims. The aim of this study is to investigate the kinematics of the outer regions of the LMC by using stellar proper motions to understand the impact of interactions, for example with the SMC about 250 Myr ago. Methods. We calculate proper motions using multi-epoch K s -band images from the VISTA survey of the Magellanic Cloud system (VMC). Observations span a time baseline of 2-5 yr. We combine the VMC data with data from the Gaia Early Data Release 3 and introduce a new method to distinguish between Magellanic and Milky Way stars based on a machine learning algorithm. This new technique enables a larger and cleaner sample selection of fainter sources as it reaches below the red clump of the LMC. Results. We investigate the impact of the SMC on the rotational field of the LMC and find hints of stripped SMC debris. The southeastern region of the LMC shows a slow rotational speed compared to the overall rotation. N-body simulations suggest that this could be caused by a fraction of stripped SMC stars located in that particular region that move opposite to the expected rotation. KW - Galaxy: kinematics and dynamics KW - Magellanic Clouds KW - galaxies: KW - interactions KW - proper motions KW - surveys Y1 - 2022 U6 - https://doi.org/10.1051/0004-6361/202142148 SN - 0004-6361 SN - 1432-0746 VL - 663 PB - EDP Sciences CY - Les Ulis ER - TY - JOUR A1 - Schröder, Jakob A1 - Evans, Alexander A1 - Polatidis, Efthymios A1 - Mohr, Gunther A1 - Serrano-Munoz, Itziar A1 - Bruno, Giovanni A1 - Čapek, Jan T1 - Understanding the impact of texture on the micromechanical anisotropy of laser powder bed fused Inconel 718 JF - Journal of materials science N2 - The manufacturability of metallic alloys using laser-based additive manufacturing methods such as laser powder bed fusion has substantially improved within the last decade. However, local melting and solidification cause hierarchically structured and crystallographically textured microstructures possessing large residual stress. Such microstructures are not only the origin of mechanical anisotropy but also pose metrological challenges for the diffraction-based residual stress determination. Here we demonstrate the influence of the build orientation and the texture on the microstructure and consequently the mechanical anisotropy of as-built Inconel 718. For this purpose, we manufactured specimens with [001]/[011]-, [001]- and [011]/[11 (1) over bar]-type textures along their loading direction. In addition to changes in the Young's moduli, the differences in the crystallographic textures result in variations of the yield and ultimate tensile strengths. With this in mind, we studied the anisotropy on the micromechanical scale by subjecting the specimens to tensile loads along the different texture directions during in situ neutron diffraction experiments. In this context, the response of multiple lattice planes up to a tensile strain of 10% displayed differences in the load partitioning and the residual strain accumulation for the specimen with [011]/[(1) over bar 11]-type texture. However, the relative behavior of the specimens possessing an [001] /[011]- and [001]-type texture remained qualitatively similar. The consequences on the metrology of residual stress determination methods are discussed. Y1 - 2022 U6 - https://doi.org/10.1007/s10853-022-07499-9 SN - 0022-2461 SN - 1573-4803 VL - 57 IS - 31 SP - 15036 EP - 15058 PB - Springer CY - New York ER - TY - JOUR A1 - Schwope, Axel A1 - Pires, Adriana M. A1 - Kurpas, Jan A1 - Doroshenko, Victor A1 - Suleimanov, Valery F. A1 - Freyberg, Michael A1 - Becker, Werner A1 - Dennerl, Konrad A1 - Haberl, Frank A1 - Lamer, Georg A1 - Maitra, Chandreyee A1 - Potekhin, Alexander Y. A1 - Ramos-Ceja, Miriam E. A1 - Santangelo, Andrea A1 - Traulsen, Iris A1 - Werner, Klaus T1 - Phase-resolved X-ray spectroscopy of PSR B0656+14 with SRG/eROSITA and XMM-Newton JF - Astronomy and astrophysics : an international weekly journal N2 - We present a detailed spectroscopic and timing analysis of X-ray observations of the bright pulsar PSR B0656+14. The observations were obtained simultaneously with eROSITA and XMM-Newton during the calibration and performance verification phase of the Spektrum-Roentgen-Gamma mission (SRG). The analysis of the 100 ks deep observation of eROSITA is supported by archival observations of the source, including XMM-Newton, NuSTAR, and NICER. Using XMM-Newton and NICER, we first established an X-ray ephemeris for the time interval 2015 to 2020, which connects all X-ray observations in this period without cycle count alias and phase shifts. The mean eROSITA spectrum clearly reveals an absorption feature originating from the star at 570 eV with a Gaussian sigma of about 70 eV that was tentatively identified in a previous long XMM-Newton observation. A second previously discussed absorption feature occurs at 260-265 eV and is described here as an absorption edge. It could be of atmospheric or of instrumental origin. These absorption features are superposed on various emission components that are phenomenologically described here as the sum of hot (120 eV) and cold (65 eV) blackbody components, both of photospheric origin, and a power law with photon index Gamma = 2 from the magnetosphere. We created energy-dependent light curves and phase-resolved spectra with a high signal-to-noise ratio. The phase-resolved spectroscopy reveals that the Gaussian absorption line at 570 eV is clearly present throughout similar to 60% of the spin cycle, but it is otherwise undetected. Likewise, its parameters were found to be dependent on phase. The visibility of the line strength coincides in phase with the maximum flux of the hot blackbody. If the line originates from the stellar surface, it nevertheless likely originates from a different location than the hot polar cap. We also present three families of model atmospheres: a magnetized atmosphere, a condensed surface, and a mixed model. They were applied to the mean observed spectrum, whose continuum fit the observed data well. The atmosphere model, however, predicts distances that are too short. For the mixed model, the Gaussian absorption may be interpreted as proton cyclotron absorption in a field as high as 10(14) G, which is significantly higher than the field derived from the moderate observed spin-down. KW - stars: neutron KW - X-rays: stars KW - pulsars: individual: PSR B0656+14 Y1 - 2022 U6 - https://doi.org/10.1051/0004-6361/202141105 SN - 0004-6361 SN - 1432-0746 VL - 661 PB - EDP Sciences CY - Les Ulis ER - TY - JOUR A1 - Scott, Shane A1 - Weiss, Matthias A1 - Selhuber-Unkel, Christine A1 - Barooji, Younes F. A1 - Sabri, Adal A1 - Erler, Janine T. A1 - Metzler, Ralf A1 - Oddershede, Lene B. T1 - Extracting, quantifying, and comparing dynamical and biomechanical properties of living matter through single particle tracking JF - Physical chemistry, chemical physics : a journal of European Chemical Societies N2 - A panoply of new tools for tracking single particles and molecules has led to an explosion of experimental data, leading to novel insights into physical properties of living matter governing cellular development and function, health and disease. In this Perspective, we present tools to investigate the dynamics and mechanics of living systems from the molecular to cellular scale via single-particle techniques. In particular, we focus on methods to measure, interpret, and analyse complex data sets that are associated with forces, materials properties, transport, and emergent organisation phenomena within biological and soft-matter systems. Current approaches, challenges, and existing solutions in the associated fields are outlined in order to support the growing community of researchers at the interface of physics and the life sciences. Each section focuses not only on the general physical principles and the potential for understanding living matter, but also on details of practical data extraction and analysis, discussing limitations, interpretation, and comparison across different experimental realisations and theoretical frameworks. Particularly relevant results are introduced as examples. While this Perspective describes living matter from a physical perspective, highlighting experimental and theoretical physics techniques relevant for such systems, it is also meant to serve as a solid starting point for researchers in the life sciences interested in the implementation of biophysical methods. Y1 - 2022 U6 - https://doi.org/10.1039/d2cp01384c SN - 1463-9076 SN - 1463-9084 VL - 25 IS - 3 SP - 1513 EP - 1537 PB - RSC Publ. CY - Cambridge ER - TY - JOUR A1 - Seckler, Henrik A1 - Metzler, Ralf T1 - Bayesian deep learning for error estimation in the analysis of anomalous diffusion JF - Nature Communnications N2 - Modern single-particle-tracking techniques produce extensive time-series of diffusive motion in a wide variety of systems, from single-molecule motion in living-cells to movement ecology. The quest is to decipher the physical mechanisms encoded in the data and thus to better understand the probed systems. We here augment recently proposed machine-learning techniques for decoding anomalous-diffusion data to include an uncertainty estimate in addition to the predicted output. To avoid the Black-Box-Problem a Bayesian-Deep-Learning technique named Stochastic-Weight-Averaging-Gaussian is used to train models for both the classification of the diffusionmodel and the regression of the anomalous diffusion exponent of single-particle-trajectories. Evaluating their performance, we find that these models can achieve a wellcalibrated error estimate while maintaining high prediction accuracies. In the analysis of the output uncertainty predictions we relate these to properties of the underlying diffusion models, thus providing insights into the learning process of the machine and the relevance of the output. KW - random-walk KW - models Y1 - 2022 U6 - https://doi.org/10.1038/s41467-022-34305-6 SN - 2041-1723 VL - 13 PB - Nature Publishing Group UK CY - London ER - TY - JOUR A1 - Seckler, Henrik A1 - Metzler, Ralf T1 - Bayesian deep learning for error estimation in the analysis of anomalous diffusion JF - Nature Communications N2 - Modern single-particle-tracking techniques produce extensive time-series of diffusive motion in a wide variety of systems, from single-molecule motion in living-cells to movement ecology. The quest is to decipher the physical mechanisms encoded in the data and thus to better understand the probed systems. We here augment recently proposed machine-learning techniques for decoding anomalous-diffusion data to include an uncertainty estimate in addition to the predicted output. To avoid the Black-Box-Problem a Bayesian-Deep-Learning technique named Stochastic-Weight-Averaging-Gaussian is used to train models for both the classification of the diffusion model and the regression of the anomalous diffusion exponent of single-particle-trajectories. Evaluating their performance, we find that these models can achieve a well-calibrated error estimate while maintaining high prediction accuracies. In the analysis of the output uncertainty predictions we relate these to properties of the underlying diffusion models, thus providing insights into the learning process of the machine and the relevance of the output.
Diffusive motions in complex environments such as living biological cells or soft matter systems can be analyzed with single-particle-tracking approaches, where accuracy of output may vary. The authors involve a machine-learning technique for decoding anomalous-diffusion data and provide an uncertainty estimate together with predicted output. Y1 - 2022 U6 - https://doi.org/10.1038/s41467-022-34305-6 SN - 2041-1723 VL - 13 IS - 1 PB - Nature portfolio CY - Berlin ER - TY - GEN A1 - Seckler, Henrik A1 - Metzler, Ralf T1 - Bayesian deep learning for error estimation in the analysis of anomalous diffusion T2 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Sprache Englisch Modern single-particle-tracking techniques produce extensive time-series of diffusive motion in a wide variety of systems, from single-molecule motion in living-cells to movement ecology. The quest is to decipher the physical mechanisms encoded in the data and thus to better understand the probed systems. We here augment recently proposed machine-learning techniques for decoding anomalous-diffusion data to include an uncertainty estimate in addition to the predicted output. To avoid the Black-Box-Problem a Bayesian-Deep-Learning technique named Stochastic-Weight-Averaging-Gaussian is used to train models for both the classification of the diffusionmodel and the regression of the anomalous diffusion exponent of single-particle-trajectories. Evaluating their performance, we find that these models can achieve a wellcalibrated error estimate while maintaining high prediction accuracies. In the analysis of the output uncertainty predictions we relate these to properties of the underlying diffusion models, thus providing insights into the learning process of the machine and the relevance of the output. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1314 KW - random-walk KW - models Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-586025 SN - 1866-8372 IS - 1314 ER - TY - JOUR A1 - Serrano-Munoz, Itziar A1 - Fernández Serrano, Ricardo A1 - Saliwan-Neumann, Romeo A1 - Gonzalez-Doncel, Gaspar A1 - Bruno, Giovanni T1 - Dislocation substructures in pure aluminium after creep deformation as studied by electron backscatter diffraction JF - Journal of applied crystallography / International Union of Crystallography N2 - In the present work, electron backscatter diffraction was used to determine the microscopic dislocation structures generated during creep (with tests interrupted at the steady state) in pure 99.8% aluminium. This material was investigated at two different stress levels, corresponding to the power-law and power-law breakdown regimes. The results show that the formation of subgrain cellular structures occurs independently of the crystallographic orientation. However, the density of these cellular structures strongly depends on the grain crystallographic orientation with respect to the tensile axis direction, with (111) grains exhibiting the highest densities at both stress levels. It is proposed that this behaviour is due to the influence of intergranular stresses, which is different in (111) and (001) grains. KW - creep KW - pure aluminium KW - electron backscatter diffraction (EBSD) KW - cellular KW - structures KW - power law and power-law breakdown Y1 - 2022 U6 - https://doi.org/10.1107/S1600576722005209 SN - 1600-5767 VL - 55 SP - 860 EP - 869 PB - Munksgaard CY - Copenhagen ER - TY - JOUR A1 - Sharma, Anjali A1 - Bekir, Marek A1 - Lomadze, Nino A1 - Jung, Se-Hyeong A1 - Pich, Andrij A1 - Santer, Svetlana T1 - Generation of local diffusioosmotic flow by light responsive microgels JF - Langmuir N2 - Here we show that microgels trapped at a solid wall can issue liquid flow and transport over distances several times larger than the particle size. The microgel consists of cross-linked poly(N-isopropylacrylamide-co-acrylic acid) (PNIPAM-AA) polymer chains loaded with cationic azobenzene-containing surfactant, which can assume either a trans-or a cis-state depending on the wavelength of the applied irradiation. The microgel, being a selective absorber of trans-isomers, responds by changing its volume under irradiation with light of appropriate wavelength at which the cis-isomers of the surfactant molecules diffuse out of the particle interior. Together with the change in particle size, the expelled cis-isomers form an excess of the concentration and subsequent gradient in osmotic pressure generating a halo of local light-driven diffusioosmotic (l-LDDO) flow. The direction and the strength of the l-LDDO depends on the intensity and irradiation wavelength, as well as on the amount of surfactant absorbed by the microgel. The flow pattern around a microgel is directed radially outward and can be maintained quasi-indefinitely under exposure to blue light when the trans-/cis-ratio is 2/1, establishing a photostationary state. Irradiation with UV light, on the other hand, generates a radially transient flow pattern, which inverts from inward to outward over time at low intensities. By measuring the displacement of tracer particles around neutral microgels during a temperature-induced collapse, we can exclude that a change in particle shape itself causes the flow, i.e., just by expulsion or uptake of water. Ultimately, it is its ability to selectively absorb two isomers of photosensitive surfactant under different irradiation conditions that leads to an effective pumping caused by a self-induced diffusioosmotic flow. Y1 - 2022 U6 - https://doi.org/10.1021/acs.langmuir.2c00259 SN - 0743-7463 SN - 1520-5827 VL - 38 IS - 20 SP - 6343 EP - 6351 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Shayduk, Roman A1 - Hallmann, Jörg A1 - Rodriguez-Fernandez, Angel A1 - Scholz, Markus A1 - Lu, Wei A1 - Bösenberg, Ulrike A1 - Möller, Johannes A1 - Zozulya, Alexey A1 - Jiang, Man A1 - Wegner, Ulrike A1 - Secareanu, Radu-Costin A1 - Palmer, Guido A1 - Emons, Moritz A1 - Lederer, Max A1 - Volkov, Sergey A1 - Lindfors-Vrejoiu, Ionela A1 - Schick, Daniel A1 - Herzog, Marc A1 - Bargheer, Matias A1 - Madsen, Anders T1 - Femtosecond x-ray diffraction study of multi-THz coherent phonons in SrTiO3 JF - Applied physics letters N2 - We report generation of ultra-broadband longitudinal acoustic coherent phonon wavepackets in SrTiO3 (STO) with frequency components extending throughout the first Brillouin zone. The wavepackets are efficiently generated in STO using femtosecond infrared laser excitation of an atomically flat 1.6 nm-thick epitaxial SrRuO3 film. We use femtosecond x-ray diffraction at the European X-Ray Free Electron Laser Facility to study the dispersion and damping of phonon wavepackets. The experimentally determined damping constants for multi-THz frequency phonons compare favorably to the extrapolation of a simple ultrasound damping model over several orders of magnitude. Y1 - 2022 U6 - https://doi.org/10.1063/5.0083256 SN - 0003-6951 SN - 1077-3118 VL - 120 IS - 20 PB - AIP Publishing CY - Melville ER - TY - JOUR A1 - Sidoli, Lara A1 - Sguera, Vito A1 - Esposito, Paolo A1 - Oskinova, Lida A1 - Polletta, Maria del Carmen T1 - XMM-Newton discovery of very high obscuration in the candidate Supergiant Fast X-ray Transient AX J1714.1-3912 JF - Monthly notices of the Royal Astronomical Society N2 - We have analysed an archival XMM-Newton EPIC observation that serendipitously covered the sky position of a variable X-ray source AX J1714.1-3912, previously suggested to be a Supergiant Fast X-ray Transient (SFXT). During the XMM-Newton observation the source is variable on a timescale of hundred seconds and shows two luminosity states, with a flaring activity followed by unflared emission, with a variability amplitude of a factor of about 50. We have discovered an intense iron emission line with a centroid energy of 6.4 keV in the power law-like spectrum, modified by a large absorption (N-H similar to 10(24) cm(-2)), never observed before from this source. This X-ray spectrum is unusual for an SFXT, but resembles the so-called 'highly obscured sources', high mass X-ray binaries (HMXBs) hosting an evolved B[e] supergiant companion (sgB[e]). This might suggest that AX J1714.1-3912 is a new member of this rare type of HMXBs, which includes IGR J16318-4848 and CI Camelopardalis. Increasing this small population of sources would be remarkable, as they represent an interesting short transition evolutionary stage in the evolution of massive binaries. Nevertheless, AX J1714.1-3912 appears to share X-ray properties of both kinds of HMXBs (SFXT versus sgB[e] HMXB). Therefore, further investigations of the companion star are needed to disentangle the two hypothesis. KW - X-rays: binaries KW - X-rays: individual: AX J1714.1-3912 Y1 - 2022 U6 - https://doi.org/10.1093/mnras/stac691 SN - 0035-8711 SN - 1365-2966 VL - 512 IS - 2 SP - 2929 EP - 2935 PB - Oxford Univ. Press CY - Oxford ER - TY - JOUR A1 - Singh, Rishu Kumar A1 - Górska, Katarzyna A1 - Sandev, Trifce T1 - General approach to stochastic resetting JF - Physical review : E, Statistical, nonlinear and soft matter physics N2 - We address the effect of stochastic resetting on diffusion and subdiffusion process. For diffusion we find that mean square displacement relaxes to a constant only when the distribution of reset times possess finite mean and variance. In this case, the leading order contribution to the probability density function (PDF) of a Gaussian propagator under resetting exhibits a cusp independent of the specific details of the reset time distribution. For subdiffusion we derive the PDF in Laplace space for arbitrary resetting protocol. Resetting at constant rate allows evaluation of the PDF in terms of H function. We analyze the steady state and derive the rate function governing the relaxation behavior. For a subdiffusive process the steady state could exist even if the distribution of reset times possesses only finite mean. Y1 - 2022 U6 - https://doi.org/10.1103/PhysRevE.105.064133 SN - 2470-0045 SN - 2470-0053 VL - 105 IS - 6 PB - American Physical Society CY - College Park ER -