TY - JOUR A1 - Wang, Xuebin A1 - Wang, Xiaoli A1 - Hu, Jing A1 - Wang, Zhaoya A1 - Pimpalpalle, Tukaram M. A1 - Linker, Torsten A1 - Yin, Jian T1 - Study on the Synthesis of Novel Sugar Amino Acids T1 - 新型糖氨基酸类化合物的合成研究 JF - Acta chimica Sinica = Huaxue-xuebao N2 - Sugar amino acids (SAAs) are carbohydrate derivatives bearing both amino and carboxylic acid functional groups. SAAs represent an important class of multifunctional building blocks, which are amenable to serve as glycomimetics or peptidomimetics with well-defined structures and useful properties. Because SAAs exist in nature in many forms with various biological activities, recently, many unnatural SAAs, as the demand for finding new molecules to discover new drugs and new materials, have been designed and synthesized by a number of research groups. In this paper, we have developed a convenient method for the synthesis of novel SAAs gluco-7 and galacto-7 for the first time. The structure of gluco-7 was similar to the natural SAA glucosaminuronic acid that was a component of many typical bacterial cell walls and could be used for the preparation of type D flu vaccine; while galacto-7 was similar to the natural SAA galactosaminuronic acid that was one of bacterial Vi-antigen components of Escherichia coli. Starting from unexpensive and commercially available 3,4,6-tri-O-acetyl-D-glucal and 3,4,6-tri-O-acetyl-D-galactal, two novel SAAs gluco-7 and galacto-7 were achieved in the linear 6 steps with 34% overall yield and 19% overall yield, respectively. The key reactions included radical addition, decarboxylation, iodine generation reaction, azide reaction and reductive amination reaction. The crucial step was the synthesis of the target compound gluco-7 from gluco-6. By using method A, the target compound gluco-7 was obtained in 4 steps with 63% overall yield. To optimize the transformation from gluco-6 to gluco-7, method B was developed to generate gluco-7 by using one-pot reaction successfully with 76% yield only in one step. It proved that method B was superior to method A with shorter steps and higher yields. All the new compounds were characterized by IR, H-1 NMR, C-13 NMR and HRMS data. Study on the synthesis and biological evaluation of linear and cyclic oligomers derived from gluco-7 and galacto-7 are currently in progress. KW - sugar amino acids KW - glycal KW - radical addition KW - one-pot reaction KW - synthesis Y1 - 2015 U6 - https://doi.org/10.6023/A15030205 SN - 0567-7351 VL - 73 IS - 7 SP - 699 EP - 704 PB - Science China Press CY - Beijing ER - TY - GEN A1 - Liebig, Ferenc A1 - Sarhan, Radwan Mohamed A1 - Prietzel, Claudia Christina A1 - Reinecke, Antje A1 - Koetz, Joachim T1 - “Green” gold nanotriangles: synthesis, purification by polyelectrolyte/micelle depletion flocculation and performance in surface-enhanced Raman scattering N2 - The aim of this study was to develop a one-step synthesis of gold nanotriangles (NTs) in the presence of mixed phospholipid vesicles followed by a separation process to isolate purified NTs. Negatively charged vesicles containing AOT and phospholipids, in the absence and presence of additional reducing agents (polyampholytes, polyanions or low molecular weight compounds), were used as a template phase to form anisotropic gold nanoparticles. Upon addition of the gold chloride solution, the nucleation process is initiated and both types of particles, i.e., isotropic spherical and anisotropic gold nanotriangles, are formed simultaneously. As it was not possible to produce monodisperse nanotriangles with such a one-step procedure, the anisotropic nanoparticles needed to be separated from the spherical ones. Therefore, a new type of separation procedure using combined polyelectrolyte/micelle depletion flocculation was successfully applied. As a result of the different purification steps, a green colored aqueous dispersion was obtained containing highly purified, well-defined negatively charged flat nanocrystals with a platelet thickness of 10 nm and an edge length of about 175 nm. The NTs produce promising results in surface-enhanced Raman scattering. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 317 KW - morphological transformation KW - halide-ions KW - nanoparticles KW - shape KW - size KW - nanoprisms KW - vesicles KW - nanorods KW - silver KW - poly(ethyleneimine) Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-394430 SP - 33561 EP - 33568 ER - TY - THES A1 - Raju, Rajarshi Roy T1 - ‘Smart’ Janus emulsions BT - preparation, characterization, and application as a template for aerogel preparation N2 - Emulsions constitute one of the most prominent and continuously evolving research areas in Colloid Chemistry, which involves the preparation of mixtures or dispersions of immiscible components in a continuous medium. Besides conventional oil-in-water or water-in-oil emulsions, other emulsions of complex droplet morphologies have recently attracted significant research interests. Especially Janus emulsions, in which each droplet is comprised of two distinct sub-regions, have shown versatile potential applications. One of their advantages is the possibility of compartmentalization, which enables to play with two different chemistries in a single droplet. Though microfluidic methods are conventionally used to prepare Janus emulsions, their industrial applications are largely hindered by low throughput and extensive instrumentations. Recently, it has been discovered that simply one-pot moderate/high energy emulsification is also capable of developing Janus morphology, although their preparation and stabilization remain rather substantially challenging. This cumulative doctoral thesis focuses on the preparation and characterization of ‘smart’ Janus emulsions, i.e. Janus emulsions with special stimuli-responsive features. One-step moderate/high energy emulsification of olive and silicone oil in an aqueous medium was carried out. Special consideration was devoted to the interfacial tensions among the components to maintain the criteria of forming characteristic droplet architectures, in addition to avoiding multiple emulsion destabilization phenomena like imminent phase separation or even separated droplet formation. A series of investigations were conducted related to the formation of complexes of charged macromolecules and role of them as stabilizers to achieve stable Janus emulsions for a realistic timeframe (more than 3 months). The correlation between the size of the stabilizer particles and the droplet size of emulsion was established. Furthermore, it was observed that Janus emulsion gels with interesting rheological properties can be fabricated in the presence of suitable polyelectrolyte complexes. Janus emulsions that could be influenced by pH, temperature or magnetic field were successfully produced in presence of characteristic stimuli-responsive stabilizers. Afterwards, the effect of these changes was studied by different characterization techniques. The size and morphology could be tuned easily by changing the pH. The incorporation of iron oxide magnetic nanoparticles (synthesized separately by a co-precipitation method) to one component of the Janus emulsion was carried out so that the movement and orientation of the complex droplets in aqueous media could be controlled by an external magnetic field. Additionally, temperature-triggered instantaneous reversible breakdown of Janus droplets was also accomplished. The responses of the Janus droplets by the stimuli were well-documented and explained. Another goal of the present contribution was to exploit this special morphological feature of emulsions as a template for producing porous materials. This was demonstrated by the preparation of ultralight magnetic responsive aerogels, utilizing Janus emulsion gels. The produced aerogels also showed the capacity to separate toxic dye from water. To the best of our knowledge, this is the first example of investigation towards batch scale production of Janus emulsion with such special stimuli-responsive properties by a simple bulk emulsification method. N2 - Emulsionen bilden eines der bekanntesten und sich ständig weiterentwickelnden Forschungsgebiete in der Kolloidchemie. Dabei werden Gemische oder Dispersionen nicht miteinander mischbarer Komponenten in einem kontinuierlichen Medium hergestellt. Neben den herkömmlichen Öl-in-Wasser- oder Wasser-in-Öl-Emulsionen gewinnen in letzter Zeit andere Emulsionen mit komplexeren Tröpfchenmorphologien zunehmend an Forschungsinteresse. Hier sind vor allem Janus-Emulsionen, zu nennen, die aus zwei nicht mischbaren Ölkomponenten, dispergiert in einem wässerigen Medium, bestehen. Da jedes Tröpfchen aus zwei unterschiedlichen Kompartimenten gebildet wird, besteht hier die Möglichkeit gezielt mit der Chemie der Tröpschenbestandteile zu spielen. Obwohl mikrofluidische Verfahren üblicherweise zur Herstellung von Janus-Emulsionen verwendet werden, finden diese nur begrenzt Anwendung in der Industrie aufgrund des geringen Durchsatzes. Kürzlich wurde entdeckt, dass mit einer einfachen Eintopf-Emulgierung bei mittlerer/hoher Energie auch die Janus-Morphologie erzeugt werden kann. Die Herstellung und Stabilisierung der Emulsionen unter Anwendung dieser Methode bleibt jedoch eine große Herausforderung. Der Fokus dieser kumulativen Doktorarbeit konzentriert sich auf die Herstellung und Charakterisierung von „smarten“ Janus-Emulsionen. Diese sind zum Beispiel Janus-Emulsionen, die auf spezielle Reize/Stimuli reagieren. Eine einstufige Emulgierung mit mittlerer/hoher Energie von Oliven- und Silikonöl wurde im wässrigen Medium durchgeführt. Besonderes Augenmerk wurde auf die Grenzflächenspannungen zwischen den Komponenten gelegt, um die Kriterien für die Bildung charakteristischer Tröpfchenarchitekturen beizubehalten und um mehrfache Emulsionsdestabilisierungsphänomene wie eine Phasentrennung oder sogar eine getrennte Tröpfchenbildung zu vermeiden. Eine Reihe von Untersuchungen bezog sich auf die Bildung von Komplexen geladener Makromoleküle und deren Rolle als Stabilisatoren, um stabile Janus-Emulsionen über einen realistischen Zeitraum (länger als 3 Monate) zu erzielen. Dabei wurde eine Korrelation zwischen der Größe der Komplexe und der Tröpfchengröße festgestellt. Weiterhin konnte gezeigt werden, dass Janus-Emulsionsgele mit interessanten rheologischen Eigenschaften in Gegenwart geeigneter Polyelektrolytkomplexe hergestellt werden können. Temperatur und pH-Wert erwiesen sich als Stimulatoren für ausgewählte polymerstabilisierte Janus Emulsionen. Anschließend wurde die Auswirkung dieser Stimuli durch verschiedene Charakterisierungsmethoden untersucht. Dabei konnten die Größe und die Morphologie durch die Änderung des pH-Wertes eingestellt werden. Durch die Einfügung von magnetischen Eisenoxid-Nanopartikeln in eine der Komponenten der Janus-Emulsion konnten die Orientierung und die Bewegung der Tröpfchen durch ein externes Magnetfeld gesteuert werden. Zusätzlich konnte ein temperaturabhängiger sofortiger reversibler Zusammenfall von Janus-Tröpfchen gezeigt werden.. Ein weiteres Ziel des vorliegenden Arbeit war es, dieses spezielle morphologische Merkmal von Emulsionen als Vorlage für die Herstellung poröser Materialien zu nutzen. Dies wurde durch die Herstellung von ultraleichten magnetischen Aerogelen unter Verwendung von Janus-Emulsionsgelen demonstriert. Die hergestellten Aerogele zeigten die Fähigkeit toxischen Farbstoff von Wasser abzutrennen. Nach unserem besten Wissen ist dies das erste Beispiel für eine Untersuchung zur Herstellung von Janus-Emulsionen im Chargenmaßstab mit solchen speziellen Reiz/Stimuli responsiven Eigenschaften durch ein einfaches Emulgierungsverfahren. KW - janus emulsion KW - emulsion KW - magnetic nanoparticles KW - aerogel KW - stimul-responsive KW - stimul-responsive emulsion KW - pH-responsive KW - temperature-responsive Y1 - 2021 ER - TY - THES A1 - Sand, Patrick T1 - Übergangsmetallkatalysierte Funktionalisierungsreaktionen an Vinylsulfonylverbindungen T1 - Transition metal catalysed functionalisation of vinyl sulfonyl compounds N2 - Innerhalb dieser Arbeit erfolgte die erstmalige systematische Untersuchung von Vinylsulfonsäureethylester (1a), Phenylvinylsulfon (1b), N-Benzyl-N-methylethensulfonamid (1c) in der FUJIWARA-MORITANI Reaktion (alternativ als DHR bezeichnet). Bei dieser übergangsmetallkatalysierten Reaktion erfolgt der Aufbau einer neuen C-C-Bindung unter der doppelten Aktivierung einer C-H-Bindung. Somit kann ein atomökonomischer Aufbau von Molekülen realisiert werden, da keine Beiprodukte in Form von Salzen entstehen. Als aromatischer Reaktant wurden Acetanilide (2) verwendet, damit eine regiospezifische Kupplung durch die katalysatordirigierende Acetamid-Gruppe (CDG) erfolgt. Für die Pd-katalysierte DHR wurde eine umfangreiche Optimierung durchgeführt und anschließend konnten neun verschieden, substituierte 2 mit 1a und sieben verschieden, substituierte 2 mit 1b funktionalisiert werden. Da eine Reaktion mit 1c ausblieb, erfolgte ein Wechsel auf eine Ru-katalysierte Methode für die DHR. Mit dieser Methode konnte 1c mit Acetaniliden funktionalisiert werden und das Spektrum der verwendeten 2, in Form von deaktivierenden Substituenten erweitert werden. Im Anschluss wurden die sulfalkenylierten Acetanilide in weiterführenden Reaktionen untersucht. Hierfür wurde eine Reaktionssequenz bestehend aus einer DeacetylierungDiazotierung-Kupplungsreaktion verwendet, um die Acetamid-Gruppe in eine Abgangsgruppe zu überführen und danach in einer MATSUDA-HECK Reaktion zu kuppeln. Mit dieser Methode konnten mehrere 1,2-Dialkenylbenzole erhalten werden und die CDG ein weiteres Mal genutzt werden. Neben der Überführung der CDG in eine Abgangsgruppe konnte diese auch in die Synthese verschiedener Heterozyklen integriert werden. Dafür erfolgte zunächst eine 1,3-Zykloaddition durch deprotonierten Tosylmethylisocanid an der elektronenarmen Sulfalkenylgruppe zur Synthese von Pyrrolen. Anschließend erfolgte eine Kupplung der PyrrolFunktion und der CDG durch Zyklokondensation, wodurch Quinoline dargestellt wurden. Durch diese Synthesen konnten Schwefelanaloga des Naturstoffes Marinoquionolin A erhalten werden. Ein weitere übergangsmetallkatalysierte C-H-Aktivierungsreaktion, die MATSUDA-HECK Reaktion, wurde genutzt, um 1b zu mit verschieden, subtituierten Diazoniumsalzen zu arylieren. Hier konnten zahlreichen Styrenylsulfone erhalten werden. Der erfolgreiche Einsatz der Vinylsulfonylverbindungen in der Kreuzmetathese konnte innerhalb dieser Arbeit nicht erreicht werden. Daher erfolgte die Synthese verschiedener dialkenylierter Sulfonamide. Hierfür wurde die Kettenlänge der Alkenyl-Gruppe am Schwefel zwischen 2-3 und am Stickstoff zwischen 3-4 variiert. Der Einsatz der dialkenylierten Sulfonamide erfolgte in den zuvor untersuchten C-H-Aktivierungsmethoden. N-Allyl-N-phenylethensulfonamid (3) konnte erfolgreich in der DHR und HECK Reaktion funktionalisiert werden. Hierbei erfolgte eine methodenspezifische Kupplung in Abhängigkeit von der Elektronendichte der entsprechenden Alkenyl-Gruppe. Die DHR führte zur selektiven Arylierung der Vinyl-Gruppe und die HECK Reaktion zur Arylierung an der Allyl-Gruppe. Gemischte Produkte wurden nicht erhalten. Für die weiteren Diolefine wurde komplexe Produktgemische erhalten. Des Weiteren wurden die Diolefine in der Ringschlussmetathese untersucht und die entsprechenden Sultame in sehr guten Ausbeuten erhalten. Die Verwendung der Sultame in der C-H-Aktivierung war erfolglos. Es wird vermutet, dass für diese zweifachsubstituierten Sulfonamide die vorhandenen Reaktionsbedingungen optimiert werden müssen. Abschließend wurden verschiedene, enantiomerenreine Olefine ausgehend von Levoglucosenon dargestellt. Hierfür wurde Levoglucosenon zunächst mit einem Allyl- und 3-Butenylgrignard Reagenz umgesetzt. Die entsprechenden Produkte wurden in moderaten Ausbeuten erhalten. Eine weitere Methode begann mit der Reduktion von Levoglucosenon zum Levoglucosenol. Dieser Alkohol wurde mit Allylbromid erfolgreich verethert. Neben der Untersuchungen zur Ethersynthese, erfolgte die Veresterung von Levoglucosenol mit verschiedenen Sulfonylchloriden zu den entsprechenden Sulfonsäureestern. Diese Olefine wurden in einer Dominometathesereaktion untersucht. Ausgehend vom Allyllevoglucosenylether erfolgte die Darstellung eines Dihydrofurans. N2 - Within this work, the first systematic investigation of vinyl sulfonic acid ethyl ester (1a), phenyl vinyl sulfone (1b), N-benzyl-N-methylethene sulfonamide (1c) in the FUJIWARA-MORITANI reaction (alternatively referred to as DHR) was carried out. In this transition metal-catalysed reaction, the formation of a new C-C bond takes place through double activation of a C-H bond. Therefore, an atom-economical construction of molecules can be realised without the formation of by-products in the form of salts. Acetanilides (2) were used as aromatic reactants so that a regiospecific coupling by the catalyst-directing acetamide group (CDG) takes place. An extensive optimisation was carried out for the Pd catalysed DHR and subsequently nine differently substituted 2 could be functionalised with 1a and seven differently substituted 2 with 1b. Since a reaction with 1c failed to occur, a switch was made to a Ru-catalysed method for the DHR. With this method, 1c could be functionalised with acetanilides (2) and the spectrum of the acetanilides (2) used could be expanded to deactivating substituents. Subsequently, the sulfalkenylated acetanilides were investigated in further reactions. For this purpose, a reaction sequence consisting of a deacetylation-diazotisation-coupling reaction was used to convert the acetamide group into a leaving group and then to couple it in a MATSUDA-HECK reaction. With this method, several 1,2-dialkenylbenzenes could be obtained and the CDG was used one more time. In addition to transferring the CDG into a leaving group, it could also be integrated into the synthesis of various heterocycles. First, a 1,3 cycloaddition was carried out by deprotonated tosylmethylisocanide on the electron-deficient sulfalkenyl group for the synthesis of pyrroles. This was followed by coupling of the pyrrole function and the CDG by cyclocondensation, producing quinolines. Through these syntheses, sulfur analogues of the natural product marinoquionoline A could be obtained. Another transition metal-catalysed C-H activation reaction, the MATSUDA-HECK reaction, was used to arylate 1b with different subtituted aryldiazonium salts. Numerous styrenyl sulfones were obtained. Vinylsulfonyl compounds could not be used in cross-metathesis reactions within this work. Therefore, the synthesis of different dialkenylated sulfonamides was carried out. For this purpose, the chain length of the alkenyl group was varied between 2-3 at the sulfur atom and 3-4 at the nitrogen atom. The dialkenylated sulfonamides were used in the previously investigated C-H activation methods. N-allyl-N-phenylethensulfonamide (3) was successfully functionalised using the DHR and HECK reaction. Here, a method-specific coupling took place depending on the electron density of the corresponding alkenyl group. The DHR led to selective arylation at the vinyl group and the HECK reaction to selective arylation at the allyl group. Mixed products were not obtained. For the other diolefins, complex mixtures of products were obtained. Furthermore, the diolefins were investigated in ring closing metathesis reaction and the corresponding sultams were obtained in very good yields. The use of the synthesised sultams in C-H activation was unsuccessful. It is suggested that for these di-substituted sulfonamides the existing reaction conditions need to be optimised. Finally, various enantiomerically pure olefins were prepared starting from levoglucosenone. For this purpose, levoglucosenone was first reacted with an allyl-Grignard and 3 butenyl-Grignard reagent. The corresponding products were obtained in moderate yields. Another method started with the reduction of levoglucosenone to levoglucosenol. This alcohol was successfully etherified with allyl bromide. In addition to the studies on ether synthesis, the esterification of levoglucosenol with various sulfonyl chlorides to the corresponding sulfonic acid esters was carried out. These olefins were investigated in a domino metathesis reaction. Starting with allyl levoglucosenyl ether, the synthesis of a dihydrofuran was presented. KW - Vinylsulfonylverbindungen KW - Übergangsmetallkatalyse KW - vinyl sulfonyl compounds KW - transition metal catalysis Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-536879 ER - TY - THES A1 - Hörnke, Maria T1 - ß-Sheet formation of amyloidogenic model peptides at hydrophobic-hydrophilic interfaces BT - ß-Sheet formation of amyloidogenic model peptides at hydrophobic-hydrophilic interfaces Y1 - 2011 CY - Potsdam ER - TY - GEN A1 - Anton, Peter A1 - Laschewsky, André T1 - Zwitterionic polysoaps with reduced density of surfactant side groups N2 - Several zwitterionic polymers were prepared by radical homopolymerization of surfactant monomers which bear diallyl, diene or vinylcyclopropane moieties. These polymer systems were complemented by alternating copolymers of appropriate zwitterionic vinyl compounds. Thus, polymers with reduced (as compared with simple vinylic homopolymers, or statistical copolymers) and well defined density of surfactant side groups are obtained. The solubilities found for these polymers are dominated by polymer geometry rather than by the balance of hydrophilic and hydrophobic fragments, thus corroborating a main-chain spacer model proposed recently. All water-soluble polymers exhibit characteristic features of classical polysoaps, as shown by surface tension measurements and by solubilization of hydrophobic dyes. In contrast, the water-insoluble copolymers are capable to form stable monolayers at the air-water interface. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - paper 091 Y1 - 1993 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-17301 ER - TY - THES A1 - Janietz, Silvia T1 - Zusammnenhänge zwischen Struktur, elektrochemischem Redoxverhalten und dem Einsatz von organischen Halbleitern in der Elektronik Y1 - 2002 ER - TY - JOUR A1 - Thomas, Steffen A1 - Kleinpeter, Erich T1 - Zur Zuordnung der 13C-Chemischen Verschiebungen substituierter Naphthaline aus Ladungsdichten mit Hilfe eines neuronalen Netzes Y1 - 1995 ER - TY - JOUR A1 - Hermanns, Jolanda A1 - Schmidt, Bernd T1 - Zur Verwendung von QR-Codes in Uni-Seminaren – ein Baustein in den neu konzipierten Übungen zur Vorlesung „Organische Chemie für Studierende im Nebenfach“ T1 - The use of QR-Codes in university courses - a building block of the newly constructed accompanying exercises for the lecture "organic chemistry" for chemistry minors JF - Chemkon N2 - Die Verwendung von QR-Codes in Begleitseminaren zur Vorlesung „Organische Chemie“ für Studierende mit Chemie im Nebenfach wird vorgestellt. Die Hausaufgaben zu den Seminaren wurden mit einem QR-Code versehen. Dieser führt zu weiterführenden Hilfen. Der Einsatz der QR-Codes sowie die Neukonzeption der Seminare wurden evaluiert. N2 - The use of QR-Codes in university courses for the lecture "Organic Chemistry" for minor students is presented. The homework to the seminars includes a QR-Code. This code leads to supporting learning aids. The use of the QR-Codes as the new concept into seminars is evaluated. KW - graded learning aids KW - homework KW - Chemical exercises KW - QR-Code Y1 - 2017 U6 - https://doi.org/10.1002/ckon.201710300 SN - 0944-5846 SN - 1521-3730 VL - 24 SP - 139 EP - 141 PB - Wiley-VCH CY - Weinheim ER - TY - GEN A1 - Peter, Martin G. A1 - Förster, Hans T1 - Zur Struktur von Eumelaninen : Identifizierung von Konstitutionsmustern durch Festkörper-NMR-Spektroskopie T1 - On the Structure of Eumelanins : Identification of Constitutional Patterns by Solid-state NMR Spectroscopy N2 - Aus dem Inhalt: Melanine sind komplexe polyphenolische Polymere. In der Natur entstehen sie durch meist enzymkatalysierte oxidative Polymerisation von o-Diphenolen. Man unterscheidet die aus Dopa 1 oder Dopamin 3 hervorgehenden, tiefschwarzen Eumelanine von den aus Dopa in Gegenwart von Cystein entstehenden, gelben bis braunen Phaomelaninen. [...] T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - paper 054 Y1 - 1989 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-17038 ER - TY - JOUR A1 - Ströhl, D. A1 - Kleinpeter, Erich T1 - Zur Stereochemie acyclischer Verbindungen : III. Bestimmung der Vorzugskonformstion unterschiedlich substituirternY-Chlorpropylether Y1 - 1993 ER - TY - GEN A1 - Breternitz, Joachim A1 - Lehmann, Frederike A1 - Barnett, Sarah A. A1 - Nowell, Harriott A1 - Schorr, Susan T1 - Zur Rolle der Iodid-Methylammonium-Interaktion in der Ferroelektrizität in CH3NH3PbI3 T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Ihre außergewöhnlich hohen Konversionseffizienzen von über 20 % und die einfache Zellherstellung machen Hybridperowskite zu heißen Kandidaten für alternative Solarzellenmaterialien. CH3NH3PbI3 als Archetyp dieser Materialklasse besitzt außergewöhnliche Eigenschaften wie eine sehr effiziente Umwandlung von Solarenergie, wobei besonders Ferroelektrizität als mögliche Erklärung in den Fokus gerückt ist. Diese erfordert allerdings eine nicht-zentrosymmetrische Kristallstruktur als notwendige Voraussetzung. Wir stellen hier eine Erklärung des Symmetriebruchs in diesem Material auf kristallographischem, d. h. fernordnungs-basiertem, Wege vor. Während das Molekülkation CH3NH3+ intrinsisch polar ist, ist es extrem fehlgeordnet und kann deshalb nicht die einzige Erklärung darstellen. Es verzerrt allerdings das umgebende Kristallgitter und ruft dadurch eine Verschiebung der Iod-Atome von den zentrosymmetrischen Positionen hervor. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1199 KW - ferroelectricity KW - hybrid perovskites KW - inorganic chemistry KW - photovoltaic materials KW - structure elucidation Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-525674 SN - 1866-8372 IS - 1 ER - TY - JOUR A1 - Breternitz, Joachim A1 - Lehmann, Frederike A1 - Barnett, Sarah A. A1 - Nowell, Harriott A1 - Schorr, Susan T1 - Zur Rolle der Iodid-Methylammonium-Interaktion in der Ferroelektrizität in CH3NH3PbI3 JF - Angewandte Chemie N2 - Ihre außergewöhnlich hohen Konversionseffizienzen von über 20 % und die einfache Zellherstellung machen Hybridperowskite zu heißen Kandidaten für alternative Solarzellenmaterialien. CH3NH3PbI3 als Archetyp dieser Materialklasse besitzt außergewöhnliche Eigenschaften wie eine sehr effiziente Umwandlung von Solarenergie, wobei besonders Ferroelektrizität als mögliche Erklärung in den Fokus gerückt ist. Diese erfordert allerdings eine nicht-zentrosymmetrische Kristallstruktur als notwendige Voraussetzung. Wir stellen hier eine Erklärung des Symmetriebruchs in diesem Material auf kristallographischem, d. h. fernordnungs-basiertem, Wege vor. Während das Molekülkation CH3NH3+ intrinsisch polar ist, ist es extrem fehlgeordnet und kann deshalb nicht die einzige Erklärung darstellen. Es verzerrt allerdings das umgebende Kristallgitter und ruft dadurch eine Verschiebung der Iod-Atome von den zentrosymmetrischen Positionen hervor. KW - ferroelectricity KW - hybrid perovskites KW - inorganic chemistry KW - photovoltaic materials KW - structure elucidation Y1 - 2019 VL - 132 IS - 1 PB - John Wiley & Sons, Inc. CY - New Jersey ER - TY - THES A1 - Utecht, Manuel Martin T1 - Zur Optimierung und dem Auslesen molekularer Schalter BT - quantenchemische Untersuchungen an vier Beispielen Y1 - 2015 ER - TY - THES A1 - Priester, Torsten T1 - Zur Lösung eines thermodynamischen Phänomens der Adsorption amphiphiler Stoffe an fluiden Phasengrenzflächen : die lineare Abhängigkeit der Gleichgewichtsoberflächenspannung vom Logarithmus der Volumenkonzentration T2 - UFO Dissertation Y1 - 1999 SN - 3-930803-71-2 VL - 372 PB - UFO Atelier für Gestaltung und Verl. CY - Allensbach ER - TY - THES A1 - Fandrich, Nick T1 - Zur Charakterisierung von amphiphilen Blockcopolymeren aus N-Vinylpryrrolidon und Vinylacetat Y1 - 2009 CY - Potsdam ER - TY - JOUR A1 - Schmidt, Joachim A1 - Bechmann, Wolfgang T1 - Zur Anwendung des Skalarprodukts von Kraft und Weg auf reversible Prozesse (Druck-Volumen-Änderung, Dehnung, Elektrostatische Wechselwirkung, Hub) T1 - To the application of the scalar product of force and displacement to reversible processes (pressure-volume change, elongation, electrostatic interaction, raising) BT - die Verwendung äußerer oder systemimmanenter Kräfte BT - the use of external or system-immanent forces N2 - Wir schlagen einen allgemein anwendbaren Algorithmus vor, der unter Verwendung des Skalarprodukts von Kraft und Weg zum richtigen Vorzeichen in den Gleichungen für die Arbeit und die Potentielle Energie bei reversiblen Prozessen (Druck-Volumen-Änderung, Dehnung, Elektrostatische Wechselwirkung, Hub)führt. Wir zeigen, dass es dabei möglich ist, systemimmanente oder externe Kräfte zu benutzen. Wir zeigen, dass bei Verwendung von systemimmanenten Kräften das Skalarprodukt mit negativem Vorzeichen anzusetzen ist. Zudem ist es sehr wichtig, nötige Vorzeichenwechsel bei den einzelnen Schritten zu beachten. Wir betonen dies, weil gelegentlich übersehen wird, dass ein Vorzeichenwechsel nötig ist, wenn das Wegdifferential ds durch das Höhendifferential dh beziehungsweise durch das Abstandsdifferential dx oder dr ersetzt werden muss. KW - Skalarprodukt von Kraft und Weg KW - systemimmanente Kräfte KW - Druck-Volumen-Änderung KW - Dehnung KW - Elektrostatische Wechselwirkung KW - Gravitation KW - scalar product of force and displacement KW - system-immanent forces KW - pressure-volume change KW - elongation KW - electrostatic interaction KW - gravitation Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-69732 ER - TY - THES A1 - Schilde, Uwe T1 - Zur Abtrennung von Oxoanionen mittels chelatbildender Ionenaustauscher Y1 - 1992 ER - TY - JOUR A1 - Schröder, Martina A1 - Kümmel, Rolf A1 - Mickler, Wulfhard A1 - Uhlemann, Erhard T1 - Zur Abtrennung von Kupfer aus ammoniakalischer Lösung durch Flüssig-Flüssig-Extraktion und Flüssigmembranpermeation mit 1-Phenyl-3-methyl-4-stearoylpyrazol-5-on Y1 - 1991 ER - TY - THES A1 - Grobosch, Thomas T1 - Zur Abtrennung von Arsen und anderen Schwermetallen mit Ionenaustauschern und imprägnierten Adsorberpolymeren Y1 - 1997 CY - Potsdam ER - TY - THES A1 - Kraudelt, Heide T1 - Zur Abtrennung komplexer Anionen mit dem chelatbildenden Ionenaustauscher Wofatit MK 51 Y1 - 1997 CY - Potsdam ER - TY - JOUR A1 - Koetz, Joachim A1 - Kosmella, Sabine A1 - Kulicke, Werner-Michael A1 - Heinze, Thomas T1 - Zum Einfluss des Lösungszustandes von Carboxymethylcellulosen auf das Strukturbildungsverhalten in kolloidalen Systemen Y1 - 2002 ER - TY - JOUR A1 - Uhlemann, Erhard A1 - Banße, Wolfgang A1 - Ludwig, Eberhard A1 - Mehner, Hartmut A1 - Zeigan, Dieter T1 - Zinn(IV)-Komplexe mit dreizähnigen diaciden Liganden - 119Sn-NMR und 119mSN-Mössbauer- spektroskopische Untersuchungen Y1 - 1994 ER - TY - JOUR A1 - Greue, Th. A1 - Barberka, Thomas Andreas A1 - Pietsch, Ullrich A1 - Stumpe, Joachim A1 - Kauppe, G. T1 - Zeitaufgelöste Untersuchungen an Photochromen LB-Multischichten mittels energiedispersiver Röntgenkleinwinkelstreuung, in-plane Beugung und AFM Y1 - 1995 ER - TY - JOUR A1 - Guiet, Amandine A1 - Unmüssig, Tobias A1 - Göbel, Caren A1 - Vainio, Ulla A1 - Wollgarten, Markus A1 - Driess, Matthias A1 - Schlaad, Helmut A1 - Polte, Jörg A1 - Fischer, Anna T1 - Yolk@Shell Nanoarchitectures with Bimetallic Nanocores - Synthesis and Electrocatalytic Applications JF - Earth & planetary science letters KW - AgAu alloy nanoparticles KW - tin-rich ITO KW - yolk@shell materials KW - nanoreactor KW - soft-templating KW - inverse micelles KW - polystyrene-block-poly(4-vinylpyridine) Y1 - 2016 U6 - https://doi.org/10.1021/acsami.6b06595 SN - 1944-8244 VL - 8 SP - 28019 EP - 28029 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Kleinpeter, Erich A1 - Koch, Andreas T1 - Y-aromaticity - existing: yes or no? An answer given on the magnetic criterion (TSNMRS) JF - Tetrahedron N2 - The spatial magnetic properties (Through Space NMR Shieldings - TSNMRS) of a number of Y-shaped structures possessing 4n+2 pi-electrons (i.a. the trimethylenemethane ions TMM2+, TMM2-, the guanidinium cation, substituted and hetero analogues) have been computed, visualized as Isochemical Shielding Surfaces (ICSS) of various size and direction, were examined subject to present Y-aromaticity and the results compared with energetic and geometric criteria obtained already. (C) 2016 Elsevier Ltd. All rights reserved. KW - Y-aromaticity KW - pi-Electron delocalization KW - Theoretical calculations KW - ICSS KW - TSNMRS Y1 - 2016 U6 - https://doi.org/10.1016/j.tet.2016.02.020 SN - 0040-4020 VL - 72 SP - 1675 EP - 1685 PB - Elsevier CY - Oxford ER - TY - JOUR A1 - Gorfman, Semen A1 - Tsirelson, Vladimir A1 - Pucher, Andreas A1 - Morgenroth, Wolfgang A1 - Pietsch, Ullrich T1 - X-ray diffraction by a crystal in a permanent external electric field : electric-field-induced structural response in alpha-GaPO4 N2 - For the first time, site-selective distortion has been investigated for two different structural units in the ternary compound alpha-GaPO4 under the influence of a permanent external electric field. Based on 54 measured reflection intensities, the electric-field-induced distortion of PO4 and GaO4 tetrahedra in alpha-GaPO4 crystals is evaluated using a model of pseudoatomic displacements introduced recently [Gorfman, Tsirelson & Pietsch (2005). Acta Cryst. A61, 387- 396]. A stronger variation of the P-O bond lengths in the PO4 tetrahedron was found compared to the bonds in the GaO4 tetrahedron. The different distortions of the tetrahedra owing to the electric field were analysed in terms of the valence charge density of alpha-GaPO4 and its topological characteristics. The larger charge of the P pseudoatom compared to the Ga atom was recognized as the main reason for the higher sensitivity of the PO4 tetrahedron to a permanent external electric field Y1 - 2006 UR - http://onlinelibrary.wiley.com/journal/10.1111/(ISSN)1600-5724 U6 - https://doi.org/10.1107/S0108767305036111 SN - 0108-7673 ER - TY - THES A1 - Ermeydan, Mahmut Ali T1 - Wood cell wall modification with hydrophobic molecules T1 - Modifikation von Holzzellwänden durch hydrophobe Moleküle N2 - Wood is used for many applications because of its excellent mechanical properties, relative abundance and as it is a renewable resource. However, its wider utilization as an engineering material is limited because it swells and shrinks upon moisture changes and is susceptible to degradation by microorganisms and/or insects. Chemical modifications of wood have been shown to improve dimensional stability, water repellence and/or durability, thus increasing potential service-life of wood materials. However current treatments are limited because it is difficult to introduce and fix such modifications deep inside the tissue and cell wall. Within the scope of this thesis, novel chemical modification methods of wood cell walls were developed to improve both dimensional stability and water repellence of wood material. These methods were partly inspired by the heartwood formation in living trees, a process, that for some species results in an insertion of hydrophobic chemical substances into the cell walls of already dead wood cells, In the first part of this thesis a chemistry to modify wood cell walls was used, which was inspired by the natural process of heartwood formation. Commercially available hydrophobic flavonoid molecules were effectively inserted in the cell walls of spruce, a softwood species with low natural durability, after a tosylation treatment to obtain “artificial heartwood”. Flavonoid inserted cell walls show a reduced moisture absorption, resulting in better dimensional stability, water repellency and increased hardness. This approach was quite different compared to established modifications which mainly address hydroxyl groups of cell wall polymers with hydrophilic substances. In the second part of the work in-situ styrene polymerization inside the tosylated cell walls was studied. It is known that there is a weak adhesion between hydrophobic polymers and hydrophilic cell wall components. The hydrophobic styrene monomers were inserted into the tosylated wood cell walls for further polymerization to form polystyrene in the cell walls, which increased the dimensional stability of the bulk wood material and reduced water uptake of the cell walls considerably when compared to controls. In the third part of the work, grafting of another hydrophobic and also biodegradable polymer, poly(ɛ-caprolactone) in the wood cell walls by ring opening polymerization of ɛ-caprolactone was studied at mild temperatures. Results indicated that polycaprolactone attached into the cell walls, caused permanent swelling of the cell walls up to 5%. Dimensional stability of the bulk wood material increased 40% and water absorption reduced more than 35%. A fully biodegradable and hydrophobized wood material was obtained with this method which reduces disposal problem of the modified wood materials and has improved properties to extend the material’s service-life. Starting from a bio-inspired approach which showed great promise as an alternative to standard cell wall modifications we showed the possibility of inserting hydrophobic molecules in the cell walls and supported this fact with in-situ styrene and ɛ-caprolactone polymerization into the cell walls. It was shown in this thesis that despite the extensive knowledge and long history of using wood as a material there is still room for novel chemical modifications which could have a high impact on improving wood properties. N2 - Der nachwachsende Rohstoff Holz wird aufgrund seiner guten mechanischen Eigenschaften und der leichten Verfügbarkeit für viele Anwendungszwecke genutzt. Quellen und Schrumpfen bei Feuchtigkeitsänderungen des hygroskopischen Werkstoffs Holz limitieren jedoch die Einsatzmöglichkeiten. Ein weiteres Problem stellt der mitunter leichte Abbau – u.a. bei feuchtem Holz - durch Mikroorganismen und/oder Insekten dar. Durch chemische Modifizierungen können die Dimensionsstabilität, die Hydrophobizität und die Dauerhaftigkeit verbessert und damit die potentielle Lebensdauer des Werkstoffes erhöht werden. Dabei ist die dauerhafte Modifikation der Zellwand nur äußerst schwer realisierbar. Inspiriert von der Kernholzbildung in lebenden Bäumen, ein zellwandverändernder Prozess, der Jahre nach der Holzbildung erfolgt, wurden im Rahmen dieser Arbeit neue Ansätze zur chemischen Modifizierung der Zellwände entwickelt, um die Dimensionsstabilität und Hydrophobizität zu erhöhen. Der erste Teil der Arbeit ist stark vom Prozess der Kernholzbildung inspiriert, eine abgeleitete Chemie wurde verwendet, um die Zellwände von Fichte, einem Nadelholz von geringer natürlicher Dauerhaftigkeit, zu modifizieren. Kommerziell verfügbare hydrophobe Flavonoide wurden nach einem Tosylierungsschritt erfolgreich in die Zellwand eingebracht, um so „artifizielles Kernholz“ zu erzeugen. Die modifizierten Holzproben zeigten eine verringerte Wasseraufnahme, die zu erhöhter Dimensionsstabilität und Härte führte. Dieser Ansatz unterscheidet sich grundlegend von bereits etablierten Modifikationen, die hauptsächlich hypdrophile Substanzen an die Hydroxylgruppen der Zellwand anlagern. Der zweite Teil der Arbeit beschäftigt sich mit der Polymerisation von Styren in tosylierten Zellwänden. Es ist bekannt, dass es nur eine schwache Adhäsion zwischen den hydrophoben Polymeren und den hydrophilen Zellwandkomponenten gibt. Die hydrophoben Styren-Monomere wurden in die tosylierte Zellwand eingebracht und zu Polystyren polymerisiert. Wie bei der Modifikation mit Flavonoiden konnte eine erhöhte Dimensionsstabilität und reduzierte Wasseraufnahme der Zellwände beobachtet werden. Im dritten Teil der Arbeit wurde das biologisch abbaubare, hydrophobe poly(ɛ-caprolacton) in der Zellwand aufpolymerisiert. Die Ergebnisse deuten darauf hin, dass Polycaprolacton in der Zellwand gebunden ist und zu einer permanenten Quellung führt (bis zu 5 %). Die Dimensionsstabilität nahm um 40 % zu und die Wasseraufnahmerate konnte um mehr als 35 % reduziert werden. Mit dieser Methode kann nicht nur dimensionsstabileres Holz realisiert werden, auch biologische Abbaubarkeit und damit eine einfache Entsorgung sind gewährleistest. KW - Holzmodifikation KW - hydrophobe Moleküle KW - Dimensionsstabilität KW - Wassergehalt KW - wood modification KW - hydrophobic molecules KW - dimensional stability KW - moisture content Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-71325 ER - TY - BOOK A1 - Barthel, Helmut T1 - Wieviel Kalkstein wird zur Herstellung von einem Liter Cola gebraucht? Y1 - 1996 PB - Univ. CY - Potsdam ER - TY - BOOK A1 - Barthel, Helmut T1 - Wieviel Kalkstein wird zur Herstellung von einem Liter cola gebraucht Y1 - 1997 ER - TY - JOUR A1 - Tetenoire, Auguste A1 - Ehlert, Christopher A1 - Juaristi, Joseba Iñaki A1 - Saalfrank, Peter A1 - Alducin, Maite T1 - Why ultrafast photoinduced CO desorption dominates over oxidation on Ru(0001) JF - The journal of physical chemistry letters N2 - CO oxidation on Ru(0001) is a long-standing example of a reaction that, being thermally forbidden in ultrahigh vacuum, can be activated by femtosecond laser pulses. In spite of its relevance, the precise dynamics of the photoinduced oxidation process as well as the reasons behind the dominant role of the competing CO photodesorption remain unclear. Here we use ab initio molecular dynamics with electronic friction that account for the highly excited and nonequilibrated system created by the laser to investigate both reactions. Our simulations successfully reproduce the main experimental findings: the existence of photoinduced oxidation and desorption, the large desorption to oxidation branching ratio, and the changes in the O K-edge X-ray absorption spectra attributed to the initial stage of the oxidation process. Now, we are able to monitor in detail the ultrafast CO desorption and CO oxidation occurring in the highly excited system and to disentangle what causes the unexpected inertness to the otherwise energetically favored oxidation. Y1 - 2022 U6 - https://doi.org/10.1021/acs.jpclett.2c02327 SN - 1948-7185 VL - 13 IS - 36 SP - 8516 EP - 8521 PB - American Chemical Society CY - Washington, DC ER - TY - JOUR A1 - Fudickar, Werner A1 - Linker, Torsten T1 - Why triple bonds protect acenes from oxidation and decomposition JF - Journal of the American Chemical Society N2 - An experimental and computational study on the impact of functional groups on the oxidation stability of higher acenes is presented. We synthesized anthracenes, tetracenes, and pentacenes with various substituents at the periphery, identified their photooxygenation products, and measured the kinetics. Furthermore, the products obtained from thermolysis and the kinetics of the thermolysis are investigated. Density functional theory is applied in order to predict reaction energies, frontier molecular orbital interactions, and radical stabilization energies. The combined results allow us to describe the mechanisms of the oxidations and the subsequent thermolysis. We found that the alkynyl group not only enhances the oxidation stability of acenes but also protects the resulting endoperoxides from thermal decomposition. Additionally, such substituents increase the regioselectivity of the photooxygenation of tetracenes and pentacenes. For the first time, we oxidized alkynylpentacenes by using chemically generated singlet oxygen (O-1(2)) without irradiation and identified a 6,13-endoperoxide as the sole regioisomer. The bimolecular rate constant of this oxidation amounts to only 1 X 10(5) s(-1) M-1. This unexpectedly slow reaction is a result of a physical deactivation of O-1(2). In contrast to unsubstituted or aryl-substituted acenes, photooxygenation of alkynyl-substituted acenes proceeds most likely by a concerted mechanism, while the thermolysis is well explained by the formation of radical intermediates. Our results should be important for the future design of oxidation stable acene-based semiconductors. Y1 - 2012 U6 - https://doi.org/10.1021/ja306056x SN - 0002-7863 VL - 134 IS - 36 SP - 15071 EP - 15082 PB - American Chemical Society CY - Washington ER - TY - GEN A1 - Mondal, Suvendu Sekhar A1 - Behrens, Karsten A1 - Matthes, Philipp R. A1 - Schönfeld, Fabian A1 - Nitsch, Jörn A1 - Steffen, Andreas A1 - Primus, Philipp-Alexander A1 - Kumke, Michael Uwe A1 - Müller-Buschbaum, Klaus A1 - Holdt, Hans-Jürgen T1 - White light emission of IFP-1 by in situ co-doping of the MOF pore system with Eu3+ and Tb3+ N2 - Co-doping of the MOF 3∞[Zn(2-methylimidazolate-4-amide-5-imidate)] (IFP-1 = Imidazolate Framework Potsdam-1) with luminescent Eu3+ and Tb3+ ions presents an approach to utilize the porosity of the MOF for the intercalation of luminescence centers and for tuning of the chromaticity to the emission of white light of the quality of a three color emitter. Organic based fluorescence processes of the MOF backbone as well as metal based luminescence of the dopants are combined to one homogenous single source emitter while retaining the MOF's porosity. The lanthanide ions Eu3+ and Tb3+ were doped in situ into IFP-1 upon formation of the MOF by intercalation into the micropores of the growing framework without a structure directing effect. Furthermore, the color point is temperature sensitive, so that a cold white light with a higher blue content is observed at 77 K and a warmer white light at room temperature (RT) due to the reduction of the organic emission at higher temperatures. The study further illustrates the dependence of the amount of luminescent ions on porosity and sorption properties of the MOF and proves the intercalation of luminescence centers into the pore system by low-temperature site selective photoluminescence spectroscopy, SEM and EDX. It also covers an investigation of the border of homogenous uptake within the MOF pores and the formation of secondary phases of lanthanide formates on the surface of the MOF. Crossing the border from a homogenous co-doping to a two-phase composite system can be beneficially used to adjust the character and warmth of the white light. This study also describes two-color emitters of the formula Ln@IFP-1a–d (Ln: Eu, Tb) by doping with just one lanthanide Eu3+ or Tb3+. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 190 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-79953 SP - 4623 EP - 4631 ER - TY - JOUR A1 - Mondal, Suvendu Sekhar A1 - Behrens, Karsten A1 - Matthes, Philipp R. A1 - Schönfeld, Fabian A1 - Nitsch, Jörn A1 - Steffen, Andreas A1 - Primus, Philipp-Alexander A1 - Kumke, Michael Uwe A1 - Müller-Buschbaum, Klaus A1 - Holdt, Hans-Jürgen T1 - White light emission of IFP-1 by in situ co-doping of the MOF pore system with Eu3+ and Tb3+ JF - Journal of materials chemistry : C, Materials for optical and electronic devices N2 - Co-doping of the MOF 3∞[Zn(2-methylimidazolate-4-amide-5-imidate)] (IFP-1 = Imidazolate Framework Potsdam-1) with luminescent Eu3+ and Tb3+ ions presents an approach to utilize the porosity of the MOF for the intercalation of luminescence centers and for tuning of the chromaticity to the emission of white light of the quality of a three color emitter. Organic based fluorescence processes of the MOF backbone as well as metal based luminescence of the dopants are combined to one homogenous single source emitter while retaining the MOF's porosity. The lanthanide ions Eu3+ and Tb3+ were doped in situ into IFP-1 upon formation of the MOF by intercalation into the micropores of the growing framework without a structure directing effect. Furthermore, the color point is temperature sensitive, so that a cold white light with a higher blue content is observed at 77 K and a warmer white light at room temperature (RT) due to the reduction of the organic emission at higher temperatures. The study further illustrates the dependence of the amount of luminescent ions on porosity and sorption properties of the MOF and proves the intercalation of luminescence centers into the pore system by low-temperature site selective photoluminescence spectroscopy, SEM and EDX. It also covers an investigation of the border of homogenous uptake within the MOF pores and the formation of secondary phases of lanthanide formates on the surface of the MOF. Crossing the border from a homogenous co-doping to a two-phase composite system can be beneficially used to adjust the character and warmth of the white light. This study also describes two-color emitters of the formula Ln@IFP-1a–d (Ln: Eu, Tb) by doping with just one lanthanide Eu3+ or Tb3+. Y1 - 2015 U6 - https://doi.org/10.1039/C4TC02919D SN - 2050-7534 SN - 2050-7526 VL - 18 IS - 3 SP - 4623 EP - 4631 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Mondal, Suvendu Sekhar A1 - Behrens, Karsten A1 - Matthes, Philipp R. A1 - Schönfeld, Fabian A1 - Nitsch, Jörn A1 - Steffen, Andreas A1 - Primus, Philipp-Alexander A1 - Kumke, Michael Uwe A1 - Müller-Buschbaum, Klaus A1 - Holdt, Hans-Jürgen T1 - White light emission of IFP-1 by in situ co-doping of the MOF pore system with Eu3+ and Tb3+ JF - Journal of materials chemistry : C, Materials for optical and electronic devices Y1 - 2015 U6 - https://doi.org/10.1039/c4tc02919d SN - 2050-7526 SN - 2050-7534 VL - 3 IS - 18 SP - 4623 EP - 4631 PB - Royal Society of Chemistry CY - Cambridge ER - TY - GEN A1 - Meiling, Till Thomas A1 - Cywiński, Piotr J. A1 - Bald, Ilko T1 - White carbon: Fluorescent carbon nanoparticles with tunable quantum yield in a reproducible green synthesis N2 - In this study, a new reliable, economic, and environmentally-friendly one-step synthesis is established to obtain carbon nanodots (CNDs) with well-defined and reproducible photoluminescence (PL) properties via the microwave-assisted hydrothermal treatment of starch and Tris-acetate-EDTA (TAE) buffer as carbon sources. Three kinds of CNDs are prepared using different sets of above mentioned starting materials. The as-synthesized CNDs: C-CND (starch only), N-CND 1 (starch in TAE) and N-CND 2 (TAE only) exhibit highly homogenous PL and are ready to use without need for further purification. The CNDs are stable over a long period of time (>1 year) either in solution or as freeze-dried powder. Depending on starting material, CNDs with PL quantum yield (PLQY) ranging from less than 1% up to 28% are obtained. The influence of the precursor concentration, reaction time and type of additives on the optical properties (UV-Vis absorption, PL emission spectrum and PLQY) is carefully investigated, providing insight into the chemical processes that occur during CND formation. Remarkably, upon freeze-drying the initially brown CND-solution turns into a non-fluorescent white/slightly brown powder which recovers PL in aqueous solution and can potentially be applied as fluorescent marker in bio-imaging, as a reduction agent or as a photocatalyst. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 264 KW - Fluorescence spectroscopy KW - Nanoparticles KW - Synthesis and processing Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-97087 ER - TY - JOUR A1 - Meiling, Till T. A1 - Cywinski, Piotr J. A1 - Bald, Ilko T1 - White carbon: Fluorescent carbon nanoparticles with tunable quantum yield in a reproducible green synthesis JF - Scientific reports N2 - In this study, a new reliable, economic, and environmentally-friendly one-step synthesis is established to obtain carbon nanodots (CNDs) with well-defined and reproducible photoluminescence (PL) properties via the microwave-assisted hydrothermal treatment of starch and Tris-acetate-EDTA (TAE) buffer as carbon sources. Three kinds of CNDs are prepared using different sets of above mentioned starting materials. The as-synthesized CNDs: C-CND (starch only), N-CND 1 (starch in TAE) and N-CND 2 (TAE only) exhibit highly homogenous PL and are ready to use without need for further purification. The CNDs are stable over a long period of time (> 1 year) either in solution or as freeze-dried powder. Depending on starting material, CNDs with PL quantum yield (PLQY) ranging from less than 1% up to 28% are obtained. The influence of the precursor concentration, reaction time and type of additives on the optical properties (UV-Vis absorption, PL emission spectrum and PLQY) is carefully investigated, providing insight into the chemical processes that occur during CND formation. Remarkably, upon freeze-drying the initially brown CND-solution turns into a non-fluorescent white/slightly brown powder which recovers PL in aqueous solution and can potentially be applied as fluorescent marker in bio-imaging, as a reduction agent or as a photocatalyst. Y1 - 2016 U6 - https://doi.org/10.1038/srep28557 SN - 2045-2322 VL - 6 PB - Nature Publ. Group CY - London ER - TY - JOUR A1 - Meiling, Till Thomas A1 - Cywiński, Piotr J. A1 - Bald, Ilko T1 - White carbon: Fluorescent carbon nanoparticles with tunable quantum yield in a reproducible green synthesis JF - Scientific reports N2 - In this study, a new reliable, economic, and environmentally-friendly one-step synthesis is established to obtain carbon nanodots (CNDs) with well-defined and reproducible photoluminescence (PL) properties via the microwave-assisted hydrothermal treatment of starch and Tris-acetate-EDTA (TAE) buffer as carbon sources. Three kinds of CNDs are prepared using different sets of above mentioned starting materials. The as-synthesized CNDs: C-CND (starch only), N-CND 1 (starch in TAE) and N-CND 2 (TAE only) exhibit highly homogenous PL and are ready to use without need for further purification. The CNDs are stable over a long period of time (>1 year) either in solution or as freeze-dried powder. Depending on starting material, CNDs with PL quantum yield (PLQY) ranging from less than 1% up to 28% are obtained. The influence of the precursor concentration, reaction time and type of additives on the optical properties (UV-Vis absorption, PL emission spectrum and PLQY) is carefully investigated, providing insight into the chemical processes that occur during CND formation. Remarkably, upon freeze-drying the initially brown CND-solution turns into a non-fluorescent white/slightly brown powder which recovers PL in aqueous solution and can potentially be applied as fluorescent marker in bio-imaging, as a reduction agent or as a photocatalyst. KW - Fluorescence spectroscopy KW - Nanoparticles KW - Synthesis and processing Y1 - 2016 U6 - https://doi.org/10.1038/srep28557 VL - 6 PB - Nature Publishing Group CY - London ER - TY - JOUR A1 - Khadem, S. M. J. A1 - Hille, Carsten A1 - Löhmannsröben, Hans-Gerd A1 - Sokolov, Igor M. T1 - What information is contained in the fluorescence correlation spectroscopy curves, and where JF - Physical review : E, Statistical, nonlinear and soft matter physics Y1 - 2016 U6 - https://doi.org/10.1103/PhysRevE.94.022407 SN - 2470-0045 SN - 2470-0053 VL - 94 PB - American Physical Society CY - College Park ER - TY - JOUR A1 - Hiltl, Stephanie A1 - Böker, Alexander T1 - Wetting Phenomena on (Gradient) Wrinkle Substrates JF - Langmuir N2 - We characterize the wetting behavior of nano structured wrinkle and gradient wrinkle substrates. Different contact angles on both sides of a water droplet after deposition on a gradient sample induce the self-propelled motion of the liquid toward smaller wrinkle dimensions. The droplet motion is self-limited by the contact angles balancing out. Because of the correlation between droplet motion and contact angles, we investigate the wetting behavior of wrinkle substrates with constant dimensions (wavelengths of 400-1200 nm). Contact angles of water droplets on those substrates increase with increasing dimensions of the underlying substrate. The results are independent of the two measurement directions, parallel and perpendicular to the longitudinal axis of the nanostructure. The presented findings may be considered for designing microfluidic or related devices and initiate ideas for the development of further wrinkle applications. Y1 - 2016 U6 - https://doi.org/10.1021/acs.langmuir.6b02364 SN - 0743-7463 VL - 32 SP - 8882 EP - 8888 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Glatzel, Stefan A1 - Laschewsky, André A1 - Lutz, Jean-Francois T1 - Well-Defined uncharged polymers with a sharp UCST in water and in physiological milieu JF - Macromolecules : a publication of the American Chemical Society Y1 - 2011 U6 - https://doi.org/10.1021/ma102677k SN - 0024-9297 VL - 44 IS - 2 SP - 413 EP - 415 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Glatzel, Stefan A1 - Badi, Nezha A1 - Paech, Michael A1 - Laschewsky, André A1 - Lutz, Jean-Francois T1 - Well-defined synthetic polymers with a protein-like gelation behavior in water N2 - Homopolymers of N-acryloyl glycinamide were prepared by reversible addition-fragmentation chain transfer polymerization in water. The formed macromolecules exhibit strong polymer-polymer interactions in aqueous milieu and therefore form thermoreversible physical hydrogels in pure water, physiological buffer or cell medium. Y1 - 2010 UR - http://xlink.rsc.org/jumptojournal.cfm?journal_code=CC U6 - https://doi.org/10.1039/C0cc00038h SN - 1359-7345 ER - TY - THES A1 - Toca-Herrara, José Luis = Herrera T1 - Wechselwirkungskräfte und Struktur in Phospholipid-Schaumfilmen Y1 - 1999 CY - Potsdam ER - TY - JOUR A1 - Schuster, Ch. A1 - Koetz, Joachim A1 - Jaeger, Werner A1 - Kulicke, Werner-Michael T1 - Wechselwirkungen zwischen Klärschlammpartikeln und Polyelektrolyten Y1 - 1996 ER - TY - JOUR A1 - Bechmann, Wolfgang A1 - Bald, Ilko T1 - Wechselwirkung zwischen elektromagnetischer Strahlung und Stoff – Grundlagen der Spektroskopie N2 - Unter elektromagnetischer Strahlung versteht man eine Welle aus gekoppelten elektrischen und magnetischen Feldern. Stoffe, die dieser Welle ausgesetzt sind, können von ihr Energie aufnehmen. Dabei wechseln die Stoffe zwischen ihrem, der jeweiligen Temperatur entsprechenden energetischen Grundzustand G und einem energetisch angeregten Zustand A* (Abbildung 4.1). Y1 - 2020 SN - 978-3-662-62033-5 SN - 978-3-662-62034-2 U6 - https://doi.org/10.1007/978-3-662-62034-2_4 SP - 303 EP - 457 PB - Springer CY - Berlin ET - 7. Auflage ER - TY - THES A1 - Delajon, Christophe Bernard T1 - Wechselwirkung von Lipidmembranen mit Polyelektrolytmultischichten Y1 - 2005 CY - Potsdam ER - TY - JOUR A1 - Rading, M. Michael A1 - Sandmann, Michael A1 - Steup, Martin A1 - Chiarugi, Davide A1 - Valleriani, Angelo T1 - Weak correlation of starch and volume in synchronized photosynthetic cells JF - Physical review : E, Statistical, nonlinear and soft matter physics N2 - In cultures of unicellular algae, features of single cells, such as cellular volume and starch content, are thought to be the result of carefully balanced growth and division processes. Single-cell analyses of synchronized photoautotrophic cultures of the unicellular alga Chlamydomonas reinhardtii reveal, however, that the cellular volume and starch content are only weakly correlated. Likewise, other cell parameters, e.g., the chlorophyll content per cell, are only weakly correlated with cell size. We derive the cell size distributions at the beginning of each synchronization cycle considering growth, timing of cell division and daughter cell release, and the uneven division of cell volume. Furthermore, we investigate the link between cell volume growth and starch accumulation. This work presents evidence that, under the experimental conditions of light-dark synchronized cultures, the weak correlation between both cell features is a result of a cumulative process rather than due to asymmetric partition of biomolecules during cell division. This cumulative process necessarily limits cellular similarities within a synchronized cell population. Y1 - 2015 U6 - https://doi.org/10.1103/PhysRevE.91.012711 SN - 1539-3755 SN - 1550-2376 VL - 91 IS - 1 PB - American Physical Society CY - College Park ER - TY - JOUR A1 - Schmidt, Burkhard A1 - Lorenz, Ulf T1 - WavePacket BT - a Matlab package for numerical quantum dynamics. I: Closed quantum systems and discrete variable representations JF - Computer physics communications : an international journal devoted to computational physics and computer programs in physics N2 - WavePacket is an open-source program package for the numerical simulation of quantum-mechanical dynamics. It can be used to solve time-independent or time-dependent linear Schrödinger and Liouville–von Neumann-equations in one or more dimensions. Also coupled equations can be treated, which allows to simulate molecular quantum dynamics beyond the Born–Oppenheimer approximation. Optionally accounting for the interaction with external electric fields within the semiclassical dipole approximation, WavePacket can be used to simulate experiments involving tailored light pulses in photo-induced physics or chemistry. The graphical capabilities allow visualization of quantum dynamics ‘on the fly’, including Wigner phase space representations. Being easy to use and highly versatile, WavePacket is well suited for the teaching of quantum mechanics as well as for research projects in atomic, molecular and optical physics or in physical or theoretical chemistry. The present Part I deals with the description of closed quantum systems in terms of Schrödinger equations. The emphasis is on discrete variable representations for spatial discretization as well as various techniques for temporal discretization. The upcoming Part II will focus on open quantum systems and dimension reduction; it also describes the codes for optimal control of quantum dynamics. The present work introduces the MATLAB version of WavePacket 5.2.1 which is hosted at the Sourceforge platform, where extensive Wiki-documentation as well as worked-out demonstration examples can be found. KW - Schrodinger equation KW - Quantum dynamics KW - Numerical propagation KW - Bound states KW - Discrete variable representation KW - Non-adiabatic transitions Y1 - 0207 U6 - https://doi.org/10.1016/j.cpc.2016.12.007 SN - 0010-4655 SN - 1879-2944 VL - 213 SP - 223 EP - 234 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Weiss, Jan A1 - Li, Ang A1 - Wischerhoff, Erik A1 - Laschewsky, André T1 - Water-soluble random and alternating copolymers of styrene monomers with adjustable lower critical solution temperature JF - Polymer Chemistry N2 - Random copolymers of 4-vinylbenzyl tri(oxyethylene) and tetra(oxyethylene) ethers, as well as alternating copolymers of 4-vinylbenzyl methoxytetra(oxyethylene) ether and a series of N-substituted maleimides, were synthesised by conventional free radical polymerisation, reversible addition fragmentation chain transfer (RAFT) and atom transfer radical polymerisation (ATRP). Their thermosensitive behaviour in aqueous solution was studied by turbidimetry and dynamic light scattering. Depending on the copolymer composition, a LCST type phase transition was observed in water. The transition temperature of the obtained random as well as alternating copolymers could be varied within a broad temperature window. In the case of the random copolymers, transition temperatures could be easily fine-tuned, as they showed a linear dependence on the copolymer composition, and were additionally modified by the nature of the polymer end-groups. Alternating copolymers were extremely versatile for implementing a broad range of variations of the phase transition temperatures. Further, while alternating copolymers derived from 4-vinylbenzyl methoxytetra(oxyethylene) ether and maleimides with small hydrophobic side chains underwent macroscopic phase separation when dissolved in water and heated above their cloud point, the incorporation of maleimides bearing larger hydrophobic substituents resulted in the formation of mesoglobules above the phase transition temperature, with hydrodynamic diameters of less than 100 nm. Y1 - 2012 U6 - https://doi.org/10.1039/c1py00422k SN - 1759-9954 VL - 3 IS - 2 SP - 352 EP - 361 PB - Royal Society of Chemistry CY - Cambridge ER - TY - GEN A1 - Taubert, Andreas A1 - Balischewski, Christian A1 - Hentrich, Doreen A1 - Elschner, Thomas A1 - Eidner, Sascha A1 - Günter, Christina A1 - Behrens, Karsten A1 - Heinze, Thomas T1 - Water-soluble cellulose derivatives are sustainable additives for biomimetic calcium phosphate mineralization N2 - The effect of cellulose-based polyelectrolytes on biomimetic calcium phosphate mineralization is described. Three cellulose derivatives, a polyanion, a polycation, and a polyzwitterion were used as additives. Scanning electron microscopy, X-ray diffraction, IR and Raman spectroscopy show that, depending on the composition of the starting solution, hydroxyapatite or brushite precipitates form. Infrared and Raman spectroscopy also show that significant amounts of nitrate ions are incorporated in the precipitates. Energy dispersive X-ray spectroscopy shows that the Ca/P ratio varies throughout the samples and resembles that of other bioinspired calcium phosphate hybrid materials. Elemental analysis shows that the carbon (i.e., polymer) contents reach 10% in some samples, clearly illustrating the formation of a true hybrid material. Overall, the data indicate that a higher polymer concentration in the reaction mixture favors the formation of polymer-enriched materials, while lower polymer concentrations or high precursor concentrations favor the formation of products that are closely related to the control samples precipitated in the absence of polymer. The results thus highlight the potential of (water-soluble) cellulose derivatives for the synthesis and design of bioinspired and bio-based hybrid materials. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 354 KW - cellulose KW - polyamine KW - polyammonium salt KW - polycarboxylate KW - polyzwitterion KW - calcium phosphate KW - biomineralization KW - brushite KW - hydroyxapatite KW - biomaterial Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-400453 ER -