TY - THES A1 - Buha, Jelena T1 - Nonaqueous syntheses of metal oxide and metal nitride nanoparticles T1 - Nichtwässrige Synthesen von Metalloxid- und Metallnitrid-Nanopartikeln N2 - Nanostructured materials are materials consisting of nanoparticulate building blocks on the scale of nanometers (i.e. 10-9 m). Composition, crystallinity and morphology can enhance or even induce new properties of the materials, which are desirable for todays and future technological applications. In this work, we have shown new strategies to synthesise metal oxide and metal nitride nanomaterials. The first part of the work deals with the study of nonaqueous synthesis of metal oxide nanoparticles. We succeeded in the synthesis of In2O3 nanopartcles where we could clearly influence the morphology by varying the type of the precursors and the solvents; of ZnO mesocrystals by using acetonitrile as a solvent; of transition metal oxides (Nb2O5, Ta2O5 and HfO2) that are particularly hard to obtain on the nanoscale and other technologically important materials. Solvothermal synthesis however is not restricted to formation of oxide materials only. In the second part we show examples of nonaqueous, solvothermal reactions of metal nitrides, but the main focus lies on the investigation of the influence of different morphologies of metal oxide precursors on the formation of the metal nitride nanoparticles. In spite of various reports, the number and variety of nanocrystalline metal nitrides is marginally small by comparison to metal oxides; hence preformed metal oxides as precursors for the preparation of metal nitrides are a logical choice. By reacting oxide nanoparticles with cyanamide, urea or melamine, at temperatures of 800 to 900 °C under nitrogen flow metal nitrides could be obtained. We studied in detail the influence of the starting material and realized that size, crystallinity, type of nitrogen source and temperature play the most important role. We have managed to propose and verify a dissolution-recrystallisation model as the formation mechanism. Furthermore we could show that the initial morphology of the oxides could be retained when ammonia flow was used instead. N2 - Nanostrukturierte Materialien sind Materialien, die aus nanopartikulären Baueinheiten in der Größenordnung von Nanonmetern (d.h. 10-9 m) bestehen. Zusammensetzung, Kristallinität und Morphologie können die natürlichen Eigenschaften dieser Materialien verbessern oder zusätzliche Eigenschaften erzeugen, die für heutige und zukünftige Anwendungen und Verfahren wünschenswert sind. In dieser Arbeit präsentieren wir neue Strategien zur Synthese von Nanopartikeln der Metaloxide und Metalnitride. Im einführenden Teil wird die nichtwässrige Synthese von Metaloxidnanopartikeln beschrieben. Uns gelang die Darstellung von In2O3 Nanopartikeln, deren Größe und Form wir durch die Wahl des Prekursors und des Lösemittels deutlich beeinflussen konnten; von ZnO Mesokristallen durch den Einsatz von Acetonitril als Lösemittel; von Übergangsmetalloxiden (Nb2O5, Ta2O5 and HfO2), die besonders schwer im Nanomaßstab zu erhalten sind und von anderen, technisch relevanten Materialien. Die Möglichkeiten der solvothermalen Synthese sind nicht mit der Darstellung von Oxidmaterialen erschöpft. Im zweiten Teil zeigen wir einige Beispiele nichtwässriger, solvothermaler Synthese von Metalnitriden auf; das Hauptaugenmerk liegt aber auf einer Betrachtung der Einflüsse der Morphologie von Metaloxidnanopartikelprekursoren auf die Bildung der Metalnitridnanopartikel. Die Anzahl und Vielfalt bekannter nanokristalliner Metalnitride ist verschwindend klein im Vergleich zu den Metaloxiden, die in der Fachliteratur etabliert sind und demzufolge einen reichen Baukasten an Prekursoren zur Darstellung von Metalnitriden liefern. Durch die Reaktion von Metaloxidnanopartikeln mit Cyanamid, Urea oder Melamine bei Temperaturen von 800 bis 900 °C unter Stickstofffluss konnten Metalnitride erhalten werden. Eine detaillierte Studie der Reaktionsbedingungen und des Reaktionsablaufs zeigte auf, dass Größe und Kristallinität der Metaloxide, die Art der Stickstoffquelle und die Temperatur die entscheidenden Faktoren sind und legte eine Auflösungs-Rekristallisation als Modelmechanismus dieser Art Reaktion nahe. Darüber hinaus konnte gezeigt worden, dass die anfängliche Morphologie des Oxids unter einem Ammoniafluss beibehalten werden konnte. KW - Nichtwässrige Synthese KW - Nanopartikel KW - Metalloxide KW - Metallnitride KW - nonaqueous synthesis KW - nanoparticles KW - metal oxides KW - metal nitrides Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-18368 ER - TY - THES A1 - Garnweitner, Georg T1 - Nichtwässrige Synthese und Bildungsmechanismus von Übergangsmetalloxid-Nanopartikeln = Nonaqueous synthesis of transition-metal oxide nanoparticles and their formation mechanism T1 - Nichtwässrige Synthese und Bildungsmechanismus von Übergangsmetalloxid-Nanopartikeln N2 - In this work, the nonaqueous synthesis of binary and ternary metal oxide nanoparticles is investigated for a number of technologically important materials. A strong focus was put on studying the reaction mechanisms leading to particle formation upon solvothermal treatment of the precursors, as an understanding of the formation processes is expected to be crucial for a better control of the systems, offering the potential to tailor particle size and morphology. The synthesis of BaTiO3 was achieved by solvothermal reaction of metallic barium and titanium isopropoxide in organic solvents. Phase-pure, highly crystalline particles about 6 nm in size resulted in benzyl alcohol, whereas larger particles could be obtained in ketones such as acetone or acetophenone. In benzyl alcohol, a novel mechanism was found to lead to BaTiO3, involving a C–C coupling step between the isopropoxide ligand and the benzylic carbon of the solvent. The resulting coupling product, 4-phenyl-2-butanol, is found in almost stoichiometric yield. The particle formation in ketones proceeds via a Ti-mediated aldol condensation of the solvent, involving formal elimination of water which induces formation of the oxide. These processes also occurred when reacting solely the titanium alkoxide with ketones or aldehydes, leading to highly crystalline anatase nanoparticles for all tested solvents. In ketones, also the synthesis of nanopowders of lead zirconate titanate (PZT) was achieved, which were initially amorphous but could be crystallized by calcination at moderate temperatures. Additionally, PZT films were prepared by simply casting a suspension of the powder onto Si substrates followed by calcination.Solvothermal synthesis however is not restricted to alkoxides as precursors but is also achieved from metal acetylacetonates. The use of benzylamine as solvent proved particularly versatile, making possible the synthesis of nanocrystalline In2O3, Ga2O3, ZnO and iron oxide from the respective acetylacetonates. During the synthesis, the acetylacetonate ligand undergoes a solvolysis under C–C cleavage, resulting in metal-bound enolate ligands which, in analogy to the synthesis in ketones, induce ketimine and aldol condensation reactions. In the last section of this work, surface functionalization of anatase nanoparticles is explored. The particles were first capped with various organic ligands via a facile in situ route, which resulted in altered properties such as enhanced dispersibility in various solvents. In a second step, short functional oligopeptide segments were attached to the particles by means of a catechol linker to achieve advanced self-assembly properties. N2 - Die vorliegende Arbeit befasst sich mit der nichtwässrigen Synthese binärer und ternärer Metalloxid-Nanopartikel durch solvothermale Behandlung von Metalloxid-Vorstufen in organischen Lösungsmitteln. Dabei wurde besonderes Augenmerk auf die Reaktionsmechanismen gelegt, da eine genaue Kenntnis des Bildungsmechanismus eine bessere Kontrolle über das Partikelwachstum erwarten lässt, woraus sich die Möglichkeit der genauen Steuerung von Partikelgröße und –form ableitet. Bariumtitanat (BaTiO3) konnte durch solvothermale Reaktion von metallischem Barium und Titanisopropoxid in organischen Lösungsmitteln hergestellt werden. Hochkristalline, phasenreine Partikel von etwa 6 nm Durchmesser wurden in Benzylalkohol erhalten, während in Ketonen wie Aceton oder Acetophenon größere Partikel entstanden. In Benzylalkohol läuft ein neuartiger Reaktionsmechanismus ab, der eine C–C-Kupplungsreaktion zwischen dem Isopropoxid und dem benzylischen Kohlenstoffatom des Lösungsmittels umfasst. Das Kupplungsprodukt 4-Phenyl-2-butanol wird in praktisch stöchiometrischer Ausbeute erhalten. In Ketonen verläuft die Partikelbildung über eine titankatalysierte Aldolkondensation des Lösungsmittels, die formell die Eliminierung von Wasser einschließt, was zur Bildung des Oxids führt. Diese Prozesse liefen auch bei Umsetzung von reinem Titanisopropoxid in Ketonen oder Aldehyden ab, wobei hier hochkristalline Anatas-Nanopartikel entstanden. Auch die Synthese von Bleizirkonat-titanat-Nanopulvern war in Ketonen möglich; die zunächst amorphen Pulver konnten durch Kalzinierung bei relativ geringen Temperaturen in kristalline Nanopartikel überführt werden. Zusätzlich wurden Filme durch Auftragen einer Suspension der Pulver auf Siliziumwafer und anschließende Kalzinierung hergestellt.Die solvothermale Synthese kann allerdings auch ausgehend von Metallacetylacetonaten durchgeführt werden. Benzylamin erwies sich hier als ein sehr vielseitiges Lösungsmittel und ermöglichte die Synthese von nanokristallinem In2O3, Ga2O3, ZnO und Eisenoxid ausgehend von den jeweiligen Acetylacetonaten. Im Verlauf der Synthese wird der Acetylacetonatligand unter C–C-Bindungsspaltung solvolysiert. Die entstehenden Enolatliganden reagieren dann unter Ketimin- und Aldolkondensation analog der Solvothermalsynthese in Ketonen weiter. Der letzte Teil dieser Arbeit beschäftigt sich mit der Funktionalisierung der Partikel. Zunächst wurden TiO2-Partikel durch verschiedene organische Liganden „in situ“ funktionalisiert, wodurch Eigenschaften wie etwa die Dispergierbarkeit in unterschiedlichen Lösungsmitteln beeinflusst werden konnten. In einem zweiten Schritt wurden kurze Oligopeptidketten über eine Katecholbrücke an die Partikel geknüpft, um anspruchsvolle Selbstanordnungseigenschaften zu erzielen. KW - Nanopartikel KW - Oxidkeramik KW - Bariumtitanat KW - PZT KW - Reaktionsmechanismus KW - Funktionalisierung KW - Selbstorganisation KW - nichtwässrige Synthese KW - Solvothermalsynthese KW - C-C Bindungsknüpfung KW - Sol-Gel KW - nonaqueous synthesis KW - solvothermal synthesis KW - C-C bond formation KW - sol-gel Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-5892 ER -