TY - JOUR A1 - Vinnik, Lev A1 - Silveira, Graca A1 - Kiselev, Sergei A1 - Farra, Veronique A1 - Weber, Michael H. A1 - Stutzmann, Eleonore T1 - Cape verde hotspot from the upper crust to the top of the lower mantle JF - Earth & planetary science letters N2 - We investigate the crust, upper mantle and mantle transition zone of the Cape Verde hotspot by using seismic P and S receiver functions from several tens of local seismograph stations. We find a strong discontinuity at a depth of similar to 10 km underlain by a similar to 15-km thick layer with a high (similar to 1.9) Vp/Vs velocity ratio. We interpret this discontinuity and the underlying layer as the fossil Moho, inherited from the pre-hotspot era, and the plume-related magmatic underplate. Our uppermost-mantle models are very different from those previously obtained for this region: our S velocity is much lower and there are no indications of low densities. Contrary to previously published arguments for the standard transition zone thickness our data indicate that this thickness under the Cape Verde islands is up to similar to 30 km less than in the ambient mantle. This reduction is a combined effect of a depression of the 410-km discontinuity and an uplift of the 660-km discontinuity. The uplift is in contrast to laboratory data and some seismic data on a negligible dependence of depth of the 660-km discontinuity on temperature in hotspots. A large negative pressure-temperature slope which is suggested by our data implies that the 660-km discontinuity may resist passage of the plume. Our data reveal beneath the islands a reduction of S velocity of a few percent between 470-km and 510-km depths. The low velocity layer in the upper transition zone under the Cape Verde archipelago is very similar to that previously found under the Azores and a few other hotspots. In the literature there are reports on a regional 520-km discontinuity, the impedance of which is too large to be explained by the known phase transitions. Our observations suggest that the 520-km discontinuity may present the base of the low-velocity layer in the transition zone. KW - hotspot KW - plume KW - crust KW - upper mantle KW - mantle transition zone KW - receiver function Y1 - 2012 U6 - https://doi.org/10.1016/j.epsl.2011.12.017 SN - 0012-821X VL - 319 IS - 4 SP - 259 EP - 268 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Braeuer, B. A1 - Asch, Günter A1 - Hofstetter, Rami A1 - Haberland, Christian A1 - Jaser, Darweesh A1 - El-Kelani, Radwan J.. A1 - Weber, Michael H. T1 - Microseismicity distribution in the southern Dead Sea basin and its implications on the structure of the basin JF - Geophysical journal international N2 - While the Dead Sea basin has been studied for a long time, the available knowledge about the detailed seismicity distribution in the area, as well as the deeper structure of the basin, is limited. Therefore, within the framework of the international project DESIRE (DEad Sea Integrated REsearch project), a dense temporary local seismological network was operated in the southern Dead Sea area. We use 530 local earthquakes, having all together 26 730 P- and S-arrival times for a simultaneous inversion of 1-D velocity models, station corrections and precise earthquake locations. Jackknife tests suggest an accuracy of the derived hypocentre locations of about 1 km. Thus, the result is the first clear image of the absolute distribution of the microseismicity of the area, especially in depth. The seismicity is concentrated in the upper crust down to 20 km depth while the lower limit of the seismicity is reached at 31 km depth. The seismic events at the eastern boundary fault (EBF) in the southern part of the study area represent the northward transform motion of the Arabian Plate along the Dead Sea Transform. North of the Boqeq fault the seismic activity represents the transfer of the motion in the pull-apart basin from the eastern to the western boundary. We find that from the surface downward the seismic events are tracing the boundary faults of the basin. The western boundary is mapped down to 12 km depth while the EBF reaches about 17 km depth, forming an asymmetric basin. One fifth of the data set is related to a specific cluster in time and space, which occurred in 2007 February at the western border fault. This cluster is aligned vertically, that is, it is perpendicular to the direction of the dominating left-lateral strike-slip movement at the main transform fault. KW - Seismicity and tectonics KW - Continental tectonics: strike-slip and transform KW - Asia Y1 - 2012 U6 - https://doi.org/10.1111/j.1365-246X.2011.05318.x SN - 0956-540X VL - 188 IS - 3 SP - 873 EP - 878 PB - Wiley-Blackwell CY - Malden ER - TY - JOUR A1 - Stankiewicz, Jacek A1 - Weber, Michael H. A1 - Mohsen, Ayman A1 - Hofstetter, Rami T1 - Dead Sea Basin imaged by ambient seismic noise tomography JF - Pure and applied geophysics N2 - In the framework of the Dead Sea Integrated Research project (DESIRE), 59 seismological stations were deployed in the region of the Dead Sea Basin. Twenty of these stations recorded data of sufficiently high quality between May and September 2007 to be used for ambient seismic noise analysis. Empirical Green's functions are extracted from cross-correlations of long term recordings. These functions are dominated by Rayleigh waves, whose group velocities can be measured in the frequency range from 0.1 to 0.5 Hz. Analysis of positive and negative correlation lags of the Green's functions makes it possible to identify the direction of the source of the incoming energy. Signals with frequencies higher than 0.2 Hz originate from the Mediterranean Sea, while low frequencies arrive from the direction of the Red Sea. Travel times of the extracted Rayleigh waves were measured between station pairs for different frequencies, and tomographically inverted to provide independent velocity models. Four such 2D models were computed for a set of frequencies, all corresponding to different sampling depths, and thus together giving an indication of the velocity variations in 3D extending to a depth of 10 km. The results show low velocities in the Dead Sea Basin, consistent with previous studies suggesting up to 8 km of recent sedimentary infill in the Basin. The complex structure of the western margin of the Basin is also observed, with sedimentary infill present to depths not exceeding 5 km west of the southern part of the Dead Sea. The high velocities associated with the Lisan salt diapir are also observed down to a depth of similar to 5 km. The reliability of the results is confirmed by checkerboard recovery tests. KW - Dead Sea Basin KW - ambient noise KW - tomography Y1 - 2012 U6 - https://doi.org/10.1007/s00024-011-0350-y SN - 0033-4553 VL - 169 IS - 4 SP - 615 EP - 623 PB - Springer CY - Basel ER - TY - JOUR A1 - Vinnik, L. A1 - Kiselev, S. A1 - Weber, Michael H. A1 - Oreshin, S. A1 - Makeyeva, L. T1 - Frozen and active seismic anisotropy beneath southern Africa JF - Geophysical research letters N2 - P receiver functions from 23 stations of the SASE experiment in southern Africa are inverted simultaneously with SKS waveforms for azimuthal anisotropy in the upper mantle. Our analysis resolves the long-standing issue of depth dependence and origins of anisotropy beneath southern Africa. In the uppermost mantle we observe anisotropy with a nearly E-W fast direction, parallel to the trend of the Limpopo belt. This anisotropy may be frozen since the Archean. At a depth of 160 km the fast direction of anisotropy changes to 40 degrees and becomes close to the recent plate motion direction. This transition is nearly coincident in depth with activation of dominant glide systems in olivine and with a pronounced change in other properties of the upper mantle. Another large change in the fast direction of anisotropy corresponds to the previously found low-S-velocity layer atop the 410-km discontinuity. Citation: Vinnik, L., S. Kiselev, M. Weber, S. Oreshin, and L. Makeyeva (2012), Frozen and active seismic anisotropy beneath southern Africa, Geophys. Res. Lett., 39, L08301, doi: 10.1029/2012GL051326. Y1 - 2012 U6 - https://doi.org/10.1029/2012GL051326 SN - 0094-8276 VL - 39 PB - American Geophysical Union CY - Washington ER - TY - JOUR A1 - Petrunin, Alexey G. A1 - Rioseco, Ernesto Meneses A1 - Sobolev, Stephan Vladimir A1 - Weber, Michael H. T1 - Thermomechanical model reconciles contradictory geophysical observations at the Dead Sea Basin JF - Geochemistry, geophysics, geosystems N2 - The Dead Sea Transform (DST) comprises a boundary between the African and Arabian plates. During the last 15-20 m.y. more than 100 km of left lateral transform displacement has been accumulated on the DST and about 10 km thick Dead Sea Basin (DSB) was formed in the central part of the DST. Widespread igneous activity since some 20 Ma ago and especially in the last 5 m.y., thin (60-80 km) lithosphere constrained by seismic data and absence of seismicity below the Moho, seem to be quite natural for this tectonically active plate boundary. However, surface heat flow values of less than 50-60 mW/m(2) and deep seismicity in the lower crust (deeper than 20 km) reported for this region are apparently inconsistent with the tectonic settings specific for an active continental plate boundary and with the crustal structure of the DSB. To address these inconsistencies which comprise what we call the "DST heat-flow paradox," we have developed a numerical model that assumes an erosion of initially thick and cold lithosphere just before or during the active faulting at the DST. The optimal initial conditions for the model are defined using transient thermal analysis. From the results of our numerical experiments we conclude that the entire set of observations for the DSB can be explained within the classical pull-apart model assuming that the lithosphere has been thermally eroded at about 20 Ma and the uppermost mantle in the region have relatively weak rheology consistent with experimental data for wet olivine or pyroxenite. KW - heat flow KW - pull-apart basin KW - tectonophysics KW - thermomechanical modeling KW - transform fault Y1 - 2012 U6 - https://doi.org/10.1029/2011GC003929 SN - 1525-2027 VL - 13 IS - 8 PB - American Geophysical Union CY - Washington ER - TY - JOUR A1 - Bräuer, B. A1 - Asch, Günter A1 - Hofstetter, Rami A1 - Haberland, Christian A1 - Jaser, D. A1 - El-Kelani, R. A1 - Weber, Michael H. T1 - High-resolution local earthquake tomography of the southern Dead Sea area JF - Geophysical journal international N2 - Local earthquake data from a dense temporary seismological network in the southern Dead Sea area have been analysed within the project DESIRE (Dead Sea Integrated Research Project). Local earthquakes are used for the first precise image of the distribution of the P-wave velocity and the vP/vS ratios. 65 stations registered 655 local events within 18 months of observation time. A subset of 530 well-locatable events with 26 730 P- and S-arrival times was used to calculate a tomographic model for the vP and vP/vS distribution. Since the study area is at first-order 2-D, a gradual approach was chosen, which compromised a 2-D inversion followed by a 3-D inversion. The sedimentary basin fill is clearly imaged through high vP/vS ratios and low vP. The basin fill shows an asymmetric structure with average depth of 7 km at the western boundary and depth between 10 and 14 km at the eastern boundary. This asymmetry is reflected by the vertical strike-slip eastern border fault, and the normal faulting at the western boundary, caused by the transtensional deformation within the last 5 Myr. Within the basin fill the Lisan salt diapir is imaged through low vP/vS ratios, reflecting its low fluid content. The extensions were determined to 12 km in EW and 17 km in NS direction while its depth is 56 km. The thickness of the pre-basin sediments below the basin fill cannot be derived from the tomography datait is estimated to less than 3 km from former investigations. Below the basin, down to 18 km depth very low P-wave velocities and low vP/vS ratios are observedmost likely caused by fluids from the surrounding crust or the upper mantle. KW - Seismic tomography KW - Continental margins: transform KW - Continental tectonics: strike-slip and transform Y1 - 2012 U6 - https://doi.org/10.1111/j.1365-246X.2012.05668.x SN - 0956-540X VL - 191 IS - 3 SP - 881 EP - 897 PB - Wiley-Blackwell CY - Hoboken ER - TY - JOUR A1 - Weber, Michael H. A1 - Helwig, S. L. A1 - Bauer, Klaus A1 - Haberland, Christian A1 - Koch, Olaf A1 - Ryberg, T. A1 - Maercklin, N. A1 - Ritter, O. A1 - Schulze, A. T1 - Near-surface properties of an active fault derived by joint interpretation of different geophysical methods - the Arava/Araba Fault in the Middle East JF - Near surface geophysics N2 - The motion of tectonic plates is accommodated at fault zones. One of the unanswered questions about fault zones relates to the role they play in controlling shallow and local hydrology. This study focuses on the Arava/Araba Fault (AF) zone, the southern portion of the Dead Sea Transform (DST) in the Middle East. We combine seismic and electromagnetic methods (EM) to image the geometry and map the petro-physical properties and water occurrence in the top 100 m of this active fault. For three profiles, P-velocity and resistivity images were derived independently. Using a neural network cluster analysis three classes with similar P-velocity and resistivities could then be determined from these images. These classes correspond to spatial domains of specific material and wetness. The first class occurs primarily east of the fault consisting of 'wet' sand (dunes) and brecciated sediments, whereas the second class composed of similar material located west of the fault is 'dry'. The third class lies at depth below ca. 50 m and is composed of highly deformed and weathered Precambrian rocks that constitute the multi-branch fault zone of the AF at this location. The combination of two independent measurements like seismics and EM linked by a stringent mathematical approach has thus shown the potential to delineate the interplay of lithology and water near active faults. Y1 - 2012 U6 - https://doi.org/10.3997/1873-0604.2012031 SN - 1569-4445 VL - 10 IS - 5 SP - 381 EP - 390 PB - European Association of Geoscientists & Engineers CY - Houten ER - TY - JOUR A1 - Paschke, Marco A1 - Stiller, Manfred A1 - Ryberg, Trond A1 - Weber, Michael H. T1 - The shallow P-velocity structure of the southern Dead Sea basin derived from near-vertical incidence reflection seismic data in project DESIRE JF - Geophysical journal international N2 - As a part of the DEad Sea Integrated REsearch (DESIRE) project a near-vertical incidence reflection (NVR) experiment with a profile length of 122 km was completed in spring 2006. The profile crossed the southern Dead Sea basin (DSB), a pull-apart basin due to the strike-slip motion along the Dead Sea Transform (DST). The DST with a total displacement of 107 km since about 18 Ma is part of a left-lateral fault system which connects the spreading centre in the Red Sea with the Taurus collision zone in Turkey over a distance of about 1100 km. The seismic experiment comprises 972 source locations and 1045 receiver locations. Each source was recorded by similar to 180 active receivers and a field data set with 175 000 traces was created. From this data set, 124 444 P-wave first-break traveltimes have been picked. With these traveltimes a tomographic inversion was carried out, resulting in a 2-D P-wave velocity model with a rms error of 20.9 ms. This model is dominated by a low-velocity region associated with the DSB. Within the DSB, the model shows clearly the position of the Lisan salt diapir, identified by a high-velocity zone. A further feature is an unexpected laterally low-velocity zone with P-velocities of 3 km s1 embedded in regions with 4 km s1 in the shallow part on the west side of the DSB. Another observation is an anticlinal structure west of the DSB interpretated to the related Syrian arc fold belt. KW - Tomography KW - Controlled source seismology KW - Transform faults Y1 - 2012 U6 - https://doi.org/10.1111/j.1365-246X.2011.05270.x SN - 0956-540X VL - 188 IS - 2 SP - 524 EP - 534 PB - Wiley-Blackwell CY - Malden ER -