TY - JOUR A1 - Qiu, Xunlin A1 - Groth, Frederick A1 - Wirges, Werner A1 - Gerhard, Reimund T1 - Cellular polypropylene foam films as DC voltage insulation and as piezoelectrets BT - a comparison JF - IEEE transactions on dielectrics and electrical insulation N2 - Polymer foams are in industrial use for several decades. More recently, non-polar polymer foams were found to be piezoelectric (so-called piezoelectrets) after internal electrical charging of the cavities. So far, few studies have been carried out on the electrical-insulation properties of polymer foams. Here, we compare the piezoelectric and the DC-voltage electrical-insulation properties of cellular polypropylene (PP) foams. Their cavity microstructure can be adjusted via inflation in high-pressure nitrogen gas in combination with a subsequent thermal treatment. While inflation is effective for improving the piezoelectricity, it is detrimental for the electrical-insulation properties. The original cellular PP foam shows a breakdown strength of approximately 230 MV/m, within the same range as that of solid PP. The breakdown strength decreases with increasing degree of inflation, and the dependence on the foam thickness follows an inverse power law with an exponent of 1.2. Nevertheless, up to a thickness of 140 mu m (3.5 times the original thickness), the breakdown strength of cellular-foam PP films is at least 7 times that of an air gap with the same thickness. In addition, the influence of high temperatures and high humidities on the piezoelectricity and the breakdown strength of cellular PP was studied. It was found that the piezoelectric d(33) coefficient decays rapidly already at 70 degrees C, while the breakdown strength slightly increases during storage at 70 or 90 degrees C. Under a relative humidity of 95%, the breakdown strength increases with storage time, while the piezoelectric d(33) coefficient slightly decreases. KW - Cellular polypropylene (PP) KW - polymer-foam films KW - ferro- and piezoelectrets KW - charge storage KW - electrical breakdown KW - dielectric barrier discharges Y1 - 2018 U6 - https://doi.org/10.1109/TDEI.2018.007192 SN - 1070-9878 SN - 1558-4135 VL - 25 IS - 3 SP - 829 EP - 834 PB - Institut of Electr. and Electronics Engineers CY - Piscataway ER - TY - THES A1 - Mellinger, Axel T1 - Charge storage in electret polymers: mechanisms, characterization and applications T1 - Ladungsspeicherung in Elektret-Polymeren: Mechanismen, Charakterisierung und Anwendungen N2 - Electrets are materials capable of storing oriented dipoles or an electric surplus charge for long periods of time. The term "electret" was coined by Oliver Heaviside in analogy to the well-known word "magnet". Initially regarded as a mere scientific curiosity, electrets became increasingly imporant for applications during the second half of the 20th century. The most famous example is the electret condenser microphone, developed in 1962 by Sessler and West. Today, these devices are produced in annual quantities of more than 1 billion, and have become indispensable in modern communications technology. Even though space-charge electrets are widely used in transducer applications, relatively little was known about the microscopic mechanisms of charge storage. It was generally accepted that the surplus charges are stored in some form of physical or chemical traps. However, trap depths of less than 2 eV, obtained via thermally stimulated discharge experiments, conflicted with the observed lifetimes (extrapolations of experimental data yielded more than 100000 years). Using a combination of photostimulated discharge spectroscopy and simultaneous depth-profiling of the space-charge density, the present work shows for the first time that at least part of the space charge in, e.g., polytetrafluoroethylene, polypropylene and polyethylene terephthalate is stored in traps with depths of up to 6 eV, indicating major local structural changes. Based on this information, more efficient charge-storing materials could be developed in the future. The new experimental results could only be obtained after several techniques for characterizing the electrical, electromechanical and electrical properties of electrets had been enhanced with in situ capability. For instance, real-time information on space-charge depth-profiles were obtained by subjecting a polymer film to short laser-induced heat pulses. The high data acquisition speed of this technique also allowed the three-dimensional mapping of polarization and space-charge distributions. A highly active field of research is the development of piezoelectric sensor films from electret polymer foams. These materials store charges on the inner surfaces of the voids after having been subjected to a corona discharge, and exhibit piezoelectric properties far superior to those of traditional ferroelectric polymers. By means of dielectric resonance spectroscopy, polypropylene foams (presently the most widely used ferroelectret) were studied with respect to their thermal and UV stability. Their limited thermal stability renders them unsuitable for applications above 50 °C. Using a solvent-based foaming technique, we found an alternative material based on amorphous Teflon® AF, which exhibits a stable piezoelectric coefficient of 600 pC/N at temperatures up to 120 °C. N2 - Elektrete sind Materialien, welche orientierte elektrische Dipole oder eine elektrische Überschussladung über längere Zeit speichern können. Der Begriff wurde 1885 von Oliver Heaviside in Anlehnung an das Wort "Magnet" eingeführt. Zunächst nur als wissenschaftliche Kuriosität betrachtet, wurden sie seit Mitte des 20. Jahrhunderts in zunehmendem Maße für technische Anwendungen interessant. Als bekanntestes Beispiel sei hier das 1962 von Sessler und West entwickelte Elektret-Kondensator-Mikrofon erwähnt, welches in jährlichen Stückzahlen von mehr als 1 Milliarde hergestellt wird und aus der modernen Kommunikationstechnik nicht mehr wegzudenken ist. Trotz der weit verbreiteten Anwendungen in der Sensorik war bisher nur wenig über die mikroskopischen Mechanismen der Ladungsspeicherung bekannt. Allgemein wird davon ausgegangen, dass die Überschussladungen in physikalischen oder chemischen Haftstellen gespeichert sind. Bisherige Experimente zur thermisch stimulierten Entladung ergaben Bindungsenergien unterhalb von 2 eV, was im Widerspruch zu den beobachteten Lebensdauern (extrapoliert wurden Werte von mehr als 100000 Jahren) steht. Mittels photostimulierter Entladung sowie simultaner Messung des Ladungsprofils konnte nun für eine Reihe wichtiger Elektret-Polymere (darunter das unter dem Handelsnamen Teflon® bekannte Polytetrafluorethylen, Polypropylen und Polyethylenterephthalat) erstmals gezeigt werden, dass zumindest ein Teil der Ladungen in tiefen Haftstellen von bis zu 6 eV gespeichert wird, was auf eine tiefgreifende lokale Strukturänderung hinweist. Ausgehend von dieser Information könnten in Zukunft Materialien mit verbesserter Ladungsspeicherung gezielt entwickelt werden. Die neuen Messungen waren erst möglich, nachdem mehrere Verfahren zur Bestimmung elektrischer, elektromechanischer und mechanischer Eigenschaften von Elektreten für einen In Situ-Einsatz weiterentwickelt wurden. So konnten z. B. durch Anregung von kurzen Wärmepulsen in der Polymerfolie Informationen über das Tiefenprofil der Raumladung in Echtzeit gewonnen werden. Die schnelle Abtastung ermöglichte darüber hinaus die dreidimensionale Kartierung von Polarisationsprofilen und Raumladungen. Ein zur Zeit sehr aktives Forschungsgebiet ist die Entwicklung piezoelektrischer Sensorfolien aus geschäumten Elektret-Polymeren. Nach elektrischer Aufladung in einer Korona-Entladung werden Ladungen an der Innenseite der Gasbläschen gespeichert, wodurch das Material piezoelektrische Eigenschaften erhält, welche deutlich besser sind als die der herkömmlichen ferroelektrischen Polymere. Für die bisher gebräuchlichen Polypropylenschäume wurde neben der Temperaturstabilität mittels dielektrischer Resonanzspektroskopie auch das Verhalten unter UV-Bestrahlung untersucht. Aufgrund ihrer beschränkten thermischen Stabilität sind diese Schäume nicht für Anwendungen oberhalb von 50 °C geeignet. Mittels eines Lösungsmittel-basierten Schäumungsverfahrens wurde ein alternativer Werkstoff auf der Basis von amorphem Teflon® AF entwickelt, welcher einen stabilen piezoelektrischen Koeffizienten von 600 pC/N bei Temperaturen von bis zu 120 °C aufweist. KW - Elektret KW - Elektretfolie KW - Polymere / Physik KW - Fluorpolymere KW - Dielektrikum KW - Ladungsspeicherung KW - Ferroelektret KW - electret KW - charge storage KW - dielectrics KW - ferroelectret Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-5689 ER - TY - THES A1 - Camacho González, Francisco T1 - Charge-Storage mechanisms in polymer electrets T1 - Ladungsspeicherung Mechanismen in Polymerelektreten N2 - In view of the importance of charge storage in polymer electrets for electromechanical transducer applications, the aim of this work is to contribute to the understanding of the charge-retention mechanisms. Furthermore, we will try to explain how the long-term storage of charge carriers in polymeric electrets works and to identify the probable trap sites. Charge trapping and de-trapping processes were investigated in order to obtain evidence of the trap sites in polymeric electrets. The charge de-trapping behavior of two particular polymer electrets was studied by means of thermal and optical techniques. In order to obtain evidence of trapping or de-trapping, charge and dipole profiles in the thickness direction were also monitored. In this work, the study was performed on polyethylene terephthalate (PETP) and on cyclic-olefin copolymers (COCs). PETP is a photo-electret and contains a net dipole moment that is located in the carbonyl group (C = O). The electret behavior of PETP arises from both the dipole orientation and the charge storage. In contrast to PETP, COCs are not photo-electrets and do not exhibit a net dipole moment. The electret behavior of COCs arises from the storage of charges only. COC samples were doped with dyes in order to probe their internal electric field. COCs show shallow charge traps at 0.6 and 0.11 eV, characteristic for thermally activated processes. In addition, deep charge traps are present at 4 eV, characteristic for optically stimulated processes. PETP films exhibit a photo-current transient with a maximum that depends on the temperature with an activation energy of 0.106 eV. The pair thermalization length (rc) calculated from this activation energy for the photo-carrier generation in PETP was estimated to be approx. 4.5 nm. The generated photo-charge carriers can recombine, interact with the trapped charge, escape through the electrodes or occupy an empty trap. PETP possesses a small quasi-static pyroelectric coefficient (QPC): ~0.6 nC/(m²K) for unpoled samples, ~60 nC/(m²K) for poled samples and ~60 nC/(m²K) for unpoled samples under an electric bias (E ~10 V/µm). When stored charges generate an internal electric field of approx. 10 V/µm, they are able to induce a QPC comparable to that of the oriented dipoles. Moreover, we observe charge-dipole interaction. Since the raw data of the QPC-experiments on PETP samples is noisy, a numerical Fourier-filtering procedure was applied. Simulations show that the data analysis is reliable when the noise level is up to 3 times larger than the calculated pyroelectric current for the QPC. PETP films revealed shallow traps at approx. 0.36 eV during thermally-stimulated current measurements. These energy traps are associated with molecular dipole relaxations (C = O). On the other hand, photo-activated measurements yield deep charge traps at 4.1 and 5.2 eV. The observed wavelengths belong to the transitions in PETP that are analogous to the π - π* benzene transitions. The observed charge de-trapping selectivity in the photocharge decay indicates that the charge detrapping is from a direct photon-charge interaction. Additionally, the charge de-trapping can be facilitated by photo-exciton generation and the interaction of the photo-excitons with trapped charge carriers. These results indicate that the benzene rings (C6H4) and the dipolar groups (C = O) can stabilize and share an extra charge carrier in a chemical resonance. In this way, this charge could be de-trapped in connection with the photo-transitions of the benzene ring and with the dipole relaxations. The thermally-activated charge release shows a difference in the trap depth to its optical counterpart. This difference indicates that the trap levels depend on the de-trapping process and on the chemical nature of the trap site. That is, the processes of charge detrapping from shallow traps are related to secondary forces. The processes of charge de-trapping from deep traps are related to primary forces. Furthermore, the presence of deep trap levels causes the stability of the charge for long periods of time. N2 - Angesichts der Bedeutung der Ladungsspeicherung in Polymerelektreten für viele Anwendungen, wie z.B. in elektromechanischen Wandler, ist es das Ziel dieser Arbeit, zum Verständnis der zugrundeliegenden Mechanismen der kurz- und langfristigen Ladungsstabilisierung beizutragen sowie mögliche Haftstellen zu identifizieren. Ladungs- und Entladungsprozesse in Elektreten geben Hinweise auf Ladungshaftstellen. Diese Prozesse wurden mit thermischen und optischen Methoden bei gleichzeitiger Messung von Ladungs- und Polarisationprofilen untersucht. Die experimentellen Untersuchungen der vorliegenden Arbeit wurden an Polyethylenterephthalat (PETP) und an Cyclischen-Olefin Copolymeren (COC) durchgeführt. PETP ist ein Photoelektret und weist in der Carbonylgruppe (C = O) ein Dipolmoment auf. Die Elektreteigenschaften ergeben sich sowohl aus der Orientierungspolarisation als auch aus der Ladungsspeicherung. Im Gegensatz zu PETP ist COC kein Photoelektret und zeigt auch keine Orientierungspolarisation. Deshalb folgen die Elektreteigenschaften des COC ausschließlich aus der Ladungsspeicherung. Die COC-Proben wurden mit Farbstoffen dotiert, um das innere elektrische Feld zu untersuchen. Diese Systeme zeigen flache Ladungshaftstellen bei 0,6 und 0,11 eV, die durch thermisch stimulierte Prozesse entladen werden sowie tiefe Haftstellen bei 4 eV, die optisch stimuliert werden können. PETP-Filme zeigen einen transienten Photostrom mit einem Maximalwert ( jp), der von der Temperatur mit einer Aktivierungsenergie von 0,106 eV abhängt. Der thermische Paarabstand (rc) kann für die Photoladungsgeneration in PETP auf ca. 4,5 nm abgeschätzt werden. Die Photoladungsträger können rekombinieren, mit den gespeicherten Ladungen interagieren, über die Elektroden entkommen oder eine leere Haftstelle einnehmen. PETP zeigt einen kleinen quasi-statischen pyroelektrischen Koeffizienten (QPC) von ca. 0,6 nC/(m²K) für nicht polarisierte Proben, ca. 60 nC/(m²K) für polarisierte Proben und ca. 60 nC/(m²K) für nicht polarisierte Proben mit Vorspannung (E ~10 V/µm). Wenn die gespeicherten Ladungen ein internes elektrisches Feld von ca. 10 V/µm generieren können, sind sie in der Lage, einen QPC herbeizuführen, der vergleichbar mit dem von orientierten Dipolen ist. Es ist außerdem möglich, eine Ladungs-Dipol-Wechselwirkung zu beobachten. Da die QPM-Daten von PETP auf Grund des geringen Signals verrauscht sind, wurde ein numerisches Fourier-Filterverfahren angewandt. Simulationen zeigen, dass eine zuverlässige Datenanalyse noch bei einem Signal möglich ist, dessen Rauschen bis zu 3-mal größer ist als der berechnete pyroelektrische Strom. Messungen der thermisch stimulierten Entladung von PETP-Filmen ergaben flache Haftstellen bei ca. 0,36 eV, welche mit der Dipolrelaxation der Carbonylgruppe (C = O) assoziiert sind. Messungen der photostimulierten Entladung ergaben tiefe Haftstellen bei 4,1 und 5,2 eV. Die beobachteten Wellenlängen entsprechen Übergängen in PETP analog den π - π* Übergängen in Benzol. Die beobachtete Selektivität bei der photostimulierten Entladung lässt auf eine direkte Wechselwirkung von Photonen und Ladungen schließen. Einen zusätzlichen Einfluß auf die Entladung hat die Erzeugung von Photo-Exzitonen und deren Wechselwirkung mit den gespeicherten Ladungsträgern. Diese Ergebnisse deuten darauf hin, dass die Phenylringe (C6H4) und die Dipolgruppen (C = O) eine zusätzliche Ladung in einer chemischen Resonanz stabilisieren und miteinander teilen können. Daher kann die gebundene Ladung auch durch einen Photoübergang im Benzolring oder durch eine Dipolrelaxation freigesetzt werden. Die mittels thermisch stimulierter Entladung bestimmte Tiefe der Haftstellen unterscheidet sich deutlich von den mittels photostimulierter Entladung gemessenen Werten. Flachere Haftstellen werden bei der thermisch stimulierten Entladung gefunden und können sekundären Kräften zugeordnet werden. Die tieferen Haftstellen sind chemischer Natur und können primären Kräften zugeordnet werden. Letztere sind für die Langzeitstabilität der Ladung in Polymerelektreten verantwortlich. KW - Charge-Storage KW - polymer-electret KW - photo-stimulated discharge KW - polyethylene terephthalate KW - cyclic-olefin copolymer KW - charge-dipole interaction KW - thermo-stimulated discharge KW - thermo-luminescence KW - trap-depth KW - charge profiling KW - charge storage KW - charge trap Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-8756 ER -