TY - THES A1 - Muksin, Umar T1 - A fault-controlled geothermal system in Tarutung (North Sumatra, Indonesia)investigated by seismological analysis N2 - The seismic structure (Vp, Vp/Vs, and Qp anomalies) contributes to the physical properties and the lithology of rocks and possible fluid distribution in the region. The Vp model images the geometry of the Tarutung and the Sarulla basins. Both basins have a depth of around 2.0 km. High Vp/Vs and high attenuation (low Qp) anomalies are observed along the Sarulla graben associated with a weak zone caused by volcanic activities along the graben. Low Vp/Vs and low conductivity anomalies are found in the west of the Tarutung basin. This anomaly is interpreted as dry, compact, and rigid granitic rock in the region as also found by geological observations. Low Vp, high Vp/Vs and low Qp anomalies are found at the east of the Tarutung basin which appear to be associated with the three big geothermal manifestations in Sipoholon, Hutabarat, and Panabungan area. These anomalies are connected with high Vp/Vs and low Qp anomalies below the Tarutung basin at depth of around 3 - 10 km. This suggests that these geothermal manifestations are fed by the same source of the hot fluid below the Tarutung basin. The hot fluids from below the Tarutung basin propagate to the more dilatational and more permeable zone in the northeast. Granite found in the west of the Tarutung basin could also be abundant underneath the basin at a certain depth so that it prevents the hot fluid to be transported directly to the Tarutung basin. High seismic attenuation and low Vp/Vs anomalies are found in the southwest of the Tarutung basin below the Martimbang volcano. These anomalies are associated with hot rock below the volcano without or with less amount of partial melting. There is no indication that the volcano controls the geothermal system around the Tarutung basin. The geothermal resources around the Tarutung basin is a fault-controlled system as a result of deep circulation of fluids. Outside of the basin, the seismicity delineation and the focal mechanism correlate with the shape and the characteristics of the strike-slip Sumatran fault. Within the Tarutung basin, the seismicity is distributed more broadly which coincides with the margin of the basin. An extensional duplex system in the Tarutung basin is derived from the seismicity and focal mechanism analysis which is also consistent with the geological observations. The vertical distribution of the seismicity suggests the presence of a negative flower structure within the Tarutung basin. N2 - Indonesien zählt zu den weltweit führenden Ländern bei der Nutzung von geothermischer Energie. Die geothermischen Energiequellen sind im Wesentlichen an den aktiven Vulkanismus gebunden, der durch die Prozesse an der indonesischen Subduktionszone verursacht wird. Darüber hinaus sind geotektonische Strukturen wie beispielsweise die Sumatra-Störung als verstärkende Faktoren für das geothermische Potenzial von Bedeutung. Bei der geophysikalischen Erkundung der indonesischen Geothermie-Ressourcen konzentrierte man sich bisher vor allem auf die Magnetotellurik. Passive Seismologie wurde dahingegen ausschließlich für die Überwachung von im Betrieb befindlichen Geothermie-Anlagen verwendet. Jüngste Untersuchungungen z.B. in Island und in den USA haben jedoch gezeigt, dass seismologische Verfahren bereits in der Erkundungsphase wichtige Informationen zu den physikalischen Eigenschaften, zum Spannungsfeld und zu möglichen Fluid- und Wärmetransportwegen liefern können. In der vorgelegten Doktorarbeit werden verschiedene moderne Methoden der passiven Seismologie verwendet, um beispielhaft ein neues, von der indonesischen Regierung für zukünftige geothermische Energiegewinnung ausgewiesenes Gebiet im nördlichen Teil Sumatras (Indonesien) zu erkunden. Die konkreten Ziele der Untersuchungen umfassten (1) die Ableitung von 3D Strukturmodellen der P- und S-Wellen Geschwindigkeiten (Parameter Vp und Vs), (2) die Bestimmung der Absorptionseigenschaften (Parameter Qp), und (3) die Kartierung und Charakterisierung von Störungssystemen auf der Grundlage der Seismizitätsverteilung und der Herdflächenlösungen. Für diese Zwecke habe ich zusammen mit Kollegen ein seismologisches Netzwerk in Tarutung (Sumatra) aufgebaut und über einen Zeitraum von 10 Monaten (Mai 2011 – Februar 2012) betrieben. Insgesamt wurden hierbei 42 Stationen (jeweils ausgestattet mit EDL-Datenlogger, 3-Komponenten, 1 Hz Seismometer) über eine Fläche von etwa 35 x 35 km verteilt. Mit dem Netzwerk wurden im gesamten Zeitraum 2568 lokale Erdbeben registriert. Die integrierte Betrachtung der Ergebnisse aus den verschiedenen Teilstudien (Tomographie, Erdbebenverteilung) erlaubt neue Einblicke in die generelle geologische Stukturierung sowie eine Eingrenzung von Bereichen mit einem erhöhten geothermischen Potenzial. Das tomographische Vp-Modell ermöglicht eine Bestimmung der Geometrie von Sedimentbecken entlang der Sumatra-Störung. Für die Geothermie besonders interessant ist der Bereich nordwestlich des Tarutung-Beckens. Die dort abgebildeten Anomalien (erhöhtes Vp/Vs, geringes Qp) habe ich als mögliche Aufstiegswege von warmen Fluiden interpretiert. Die scheinbar asymetrische Verteilung der Anomalien wird hierbei im Zusammenhang mit der Seismizitätsverteilung, der Geometrie der Beben-Bruchflächen, sowie struktur-geologischen Modellvorstellungen diskutiert. Damit werden wesentliche Informationen für die Planung einer zukünftigen geothermischen Anlage bereitgestellt. T2 - Seismologische Untersuchungen eines Störungs-kontrollierten geothermischen Systems in Tarutung (Nord-Sumatra, Indonesien) KW - Tarutung KW - Sumatra Störung KW - Absorptionseigenschaften KW - seismische Geschwindigkeiten KW - Tarutung KW - Sumatra fault KW - attenuation tomography KW - velocity structure Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-72065 ER - TY - THES A1 - Radeff, Giuditta T1 - Geohistory of the Central Anatolian Plateau southern margin (southern Turkey) T1 - Die geologische Entwicklung des südlichen zentralsanatolischen Plateaurandes (Süd-Türkei) N2 - The Adana Basin of southern Turkey, situated at the SE margin of the Central Anatolian Plateau is ideally located to record Neogene topographic and tectonic changes in the easternmost Mediterranean realm. Using industry seismic reflection data we correlate 34 seismic profiles with corresponding exposed units in the Adana Basin. The time-depth conversion of the interpreted seismic profiles allows us to reconstruct the subsidence curve of the Adana Basin and to outline the occurrence of a major increase in both subsidence and sedimentation rates at 5.45 – 5.33 Ma, leading to the deposition of almost 1500 km3 of conglomerates and marls. Our provenance analysis of the conglomerates reveals that most of the sediment is derived from and north of the SE margin of the Central Anatolian Plateau. A comparison of these results with the composition of recent conglomerates and the present drainage basins indicates major changes between late Messinian and present-day source areas. We suggest that these changes in source areas result of uplift and ensuing erosion of the SE margin of the plateau. This hypothesis is supported by the comparison of the Adana Basin subsidence curve with the subsidence curve of the Mut Basin, a mainly Neogene basin located on top of the Central Anatolian Plateau southern margin, showing that the Adana Basin subsidence event is coeval with an uplift episode of the plateau southern margin. The collection of several fault measurements in the Adana region show different deformation styles for the NW and SE margins of the Adana Basin. The weakly seismic NW portion of the basin is characterized by extensional and transtensional structures cutting Neogene deposits, likely accomodating the differential uplift occurring between the basin and the SE margin of the plateau. We interpret the tectonic evolution of the southern flank of the Central Anatolian Plateau and the coeval subsidence and sedimentation in the Adana Basin to be related to deep lithospheric processes, particularly lithospheric delamination and slab break-off. N2 - Il Bacino di Adana (Turchia meridionale) é situato in posizione esterna rispetto al margine sud-orientale del plateau anatolico centrale. Il bacino risulta ubicato in posizione strategica per registrare i principali cambiamenti della topografia e dell’assetto tettonico avvenuti durante il Neogene nel Mediterraneo orientale. Utilizzando dati sismici provenienti dall’industria petrolifera abbiamo correlato 34 profili sismici con le unitá corrispondenti affioranti nel Bacino di Adana. La conversione da tempi a profonditá dei profili sismici interpretati ci ha permesso di ricostruire la curva di subsidenza del Bacino di Adana e di individuare un evento caratterizato da un importante aumento della subsidenza associato ad un considerevole incremento del tasso di sedimentazione. Questo evento, avvenuto tra 5.45 e 5.33 Ma ha portato alla deposizione di quasi 1500 km3 di conglomerati e marne. La nostra analisi di provenienza della porzione conglomeratica mostra che la maggior parte del sedimento proviene dal margine sud-orientale del plateau anatolico centrale e dalle aree situate a nord di questo. La comparazione di questi risultati con la composizione litologica di conglomerati recenti e con le litologie affioranti nei bacini di drenaggio attuali mostra cambiamenti rilevanti tra le aree di provenienza del sedimento Messiniane e quelle attuali. Riteniamo che questi cambiamenti nelle aree sorgente siano il risultato del sollevamento e della successiva erosione del margine sud-orientale del plateau anatolico centrale. Questa ipotesi é supportata dal confronto delle curve di subsidenza del Bacino di Adana e del Bacino di Mut, un bacino principalmente neogenico situato sulla sommitá del margine meridionale del plateau. La comparazione delle due curve di subsidenza mostra che l’evento di forte subsidenza del Bacino di Adana é coevo ad un episodio di sollevamento del margine meridionale del plateau anatolico centrale. La raccolta di un fitto dataset strutturale acquisito nella regione di Adana mostra differenti stili deformativi per i margini nord-occidentale e sud-orientale del bacino. La porzione nord-occidentale del bacino, debolmente sismica, é caratterizzata da strutture estensionali e transtensive che tagliano I depositi neogenici, verosimilmente accomodando il sollevamento differenziale tra il bacino e il margine sud-orientale del plateau. Riteniamo che l’evoluzione tettonica del margine meridionale del plateau anatolico centrale e la contemporanea subsidenza e sedimentazione nel Bacino di Adana sia da ricondurre a processi litosferici profondi, in particolar modo delaminazione litosferica e slab break-off. KW - Hebung des Plateaus KW - Sedimentenabfolge KW - Subsidenzgeschichte KW - Adana Becken KW - Süd-Türkei KW - plateau uplift KW - sedimentary record KW - subsidence history KW - Adana Basin KW - southern Turkey Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-71865 ER -