TY - BOOK A1 - Bechmann, Wolfgang A1 - Bald, Ilko T1 - Einstieg in die Physikalische Chemie für Naturwissenschaftler T3 - Studienbücher Chemie Lehrbuch N2 - Mit einer ausgewogenen Stoffauswahl aus den Teilgebieten Chemische Thermodynamik, Reaktionskinetik und Elektrochemie wird der Leser an das Studium der Physikalischen Chemie herangeführt. Das Verständnis der Theorie wird durch zahlreiche Aufgabenstellungen und die Angabe ihrer Lösungswege erleichtert. Das Buch gibt dem Studenten darüber hinaus Anregungen für ausgewählte Experimente zu den behandelten Teilgebieten, mit denen sich ein Grundverständnis physikalisch-chemischer Zusammenhänge entwickeln lässt. Y1 - 2018 SN - 978-3-662-55857-7 PB - Springer CY - Berlin ET - 6 ER - TY - JOUR A1 - Bechmann, Wolfgang A1 - Bald, Ilko T1 - Wechselwirkung zwischen elektromagnetischer Strahlung und Stoff – Grundlagen der Spektroskopie N2 - Unter elektromagnetischer Strahlung versteht man eine Welle aus gekoppelten elektrischen und magnetischen Feldern. Stoffe, die dieser Welle ausgesetzt sind, können von ihr Energie aufnehmen. Dabei wechseln die Stoffe zwischen ihrem, der jeweiligen Temperatur entsprechenden energetischen Grundzustand G und einem energetisch angeregten Zustand A* (Abbildung 4.1). Y1 - 2020 SN - 978-3-662-62033-5 SN - 978-3-662-62034-2 U6 - https://doi.org/10.1007/978-3-662-62034-2_4 SP - 303 EP - 457 PB - Springer CY - Berlin ET - 7. Auflage ER - TY - JOUR A1 - Bechmann, Wolfgang A1 - Bald, Ilko T1 - Reaktionskinetik JF - Einstieg in die Physikalische Chemie für Naturwissenschaftler N2 - Bei der Untersuchung chemischer Reaktionen interessiert zunächst, welche Reaktionsprodukte aus gegebenen Ausgangsstoffen gebildet werden können. Wichtig sind weiterhin Angaben zum möglichen Grad der Umsetzung der Ausgangsstoffe und zur Energiebilanz einer Reaktion. Damit sind aber noch keine Aussagen über den zeitlichen Ablauf der Stoffumwandlung getroffen. Y1 - 2020 SN - 978-3-662-62033-5 SN - 978-3-662-62034-2 U6 - https://doi.org/10.1007/978-3-662-62034-2_2 SP - 141 EP - 220 PB - Springer CY - Berlin ET - 7. Auflage ER - TY - JOUR A1 - Bechmann, Wolfgang A1 - Bald, Ilko T1 - Elektrochemie JF - Einstieg in die Physikalische Chemie für Naturwissenschaftler N2 - Es war eine Reihe experimenteller Befunde, die zur Entwicklung dieses Teilgebietes der Physikalischen Chemie und auch zu seiner Unterteilung führte. Die Liste der Namen, die mit den Experimenten verknüpft sind, liest sich nicht nur wie eine Zeittafel der Geschichte der Elektrizitätslehre, sondern auch der Physikalischen Chemie selbst. Y1 - 2020 SN - 978-3-662-62033-5 SN - 978-3-662-62034-2 U6 - https://doi.org/10.1007/978-3-662-62034-2_3 SP - 221 EP - 301 PB - Springer CY - Berlin ET - 7. Auflage ER - TY - JOUR A1 - Bechmann, Wolfgang A1 - Bald, Ilko T1 - Chemische Thermodynamik JF - Einstieg in die Physikalische Chemie für Naturwissenschaftler N2 - Der Begriff Thermodynamik ist von den griechischen Wörtern ϑερμος (warm) und δυναμις (Kraft) abgeleitet. Er steht für das Teilgebiet der Physik (Wärmelehre), das sich vor allem mit der Umwandlung von Wärmeenergie in andere Energieformen bei physikalischen Vorgängen befasst. Y1 - 2020 SN - 978-3-662-62034-2 SN - 978-3-662-62033-5 U6 - https://doi.org/10.1007/978-3-662-62034-2_1 SP - 13 EP - 140 PB - Springer CY - Berlin ET - 7. Auflage ER - TY - BOOK A1 - Bechmann, Wolfgang A1 - Bald, Ilko T1 - Einstieg in die Physikalische Chemie für Naturwissenschaftler T3 - Studienbücher Chemie Lehrbuch N2 - Der Einstieg in die Physikalische Chemie für Naturwissenschaftler Einführung in die Grundlagen der Spektroskopie und der wichtigsten Methoden der Stoff- und Strukturanalytik Mit Übungsaufgaben und allen Lösungen inkl. der Lösungswege Enthält Anleitungen für Praktikumsversuche Y1 - 2020 SN - 978-3-662-62033-5 SN - 978-3-662-62034-2 U6 - https://doi.org/10.1007/978-3-662-62034-2 PB - Springer CY - Berlin ET - 7. Auflage ER - TY - JOUR A1 - Bechmann, Wolfgang A1 - Bald, Ilko T1 - Lösungen JF - Einstieg in die Physikalische Chemie für Naturwissenschaftler N2 - In diesem Kapitel finden Sie die Lösungen zu den Übungsaufgaben. Y1 - 2020 SN - 978-3-662-62033-5 SN - 978-3-662-62034-2 U6 - https://doi.org/10.1007/978-3-662-62034-2_5 SP - 459 EP - 492 PB - Springer CY - Berlin ET - 7. Auflage ER - TY - JOUR A1 - Bechmann, Wolfgang A1 - Grunewald, Karsten T1 - Belastung von Rieselfeldböden mit organischen Schadstoffen Y1 - 1994 ER - TY - JOUR A1 - Bechmann, Wolfgang A1 - Grunewald, Karsten T1 - PAK - Profile in Rieselfeldsubstraten Y1 - 1995 ER - TY - JOUR A1 - Bechmann, Wolfgang A1 - Grunewald, Karsten T1 - Organische Schadstoffe in Böden und Substraten des Rieselfeldgebietes südlich Berlin Y1 - 1995 ER - TY - JOUR A1 - Bechmann, Wolfgang A1 - Grunewald, Karsten A1 - Barsch, Heiner A1 - Bukowsky, Heinz T1 - Strategische Planung für die Beprobung : effektive Analytik bei großflächigen Bodenkontaminationen Y1 - 1995 ER - TY - JOUR A1 - Bechmann, Wolfgang A1 - Grunewald, Karsten A1 - Barsch, Heiner A1 - Bukowsky, Heinz T1 - Strategische Planung für die Beprobung : effektive Analytik bei großflächigen Bodenkontaminationen Y1 - 1995 ER - TY - JOUR A1 - Bechmann, Wolfgang A1 - Grunewald, Karsten A1 - Bukowsky, Heinz T1 - Schadstoffe in Böden und Substraten des Rieselfeldgebietes südlich Berlin Y1 - 1996 ER - TY - JOUR A1 - Bechmann, Wolfgang A1 - Grunewald, Karsten A1 - Bukowsky, Heinz T1 - Untersuchung zur Schadstoffdynamik nach Nutzungsänderung im Rieselfeldgebiet südlich Berlin Y1 - 1996 ER - TY - JOUR A1 - Bechmann, Wolfgang A1 - Klinnert, Silke T1 - Untersuchungen zur Adsorption von Phenolderivaten an Substrate unterschiedlich anthropogen überprägter Böden Y1 - 1996 ER - TY - BOOK A1 - Bechmann, Wolfgang A1 - Schmidt, Joachim T1 - Struktur- und Stoffanalytik mit spektroskopischen Methoden T3 - Teubner Studienbücher Chemie Y1 - 2000 SN - 3-519-03552-9 U6 - https://doi.org/10.1007/978-3-322-80123-4 PB - Vieweg+Teubner Verlag CY - Wiesbaden ER - TY - BOOK A1 - Bechmann, Wolfgang A1 - Schmidt, Joachim A1 - Elschenbroich, Christoph A1 - Hensel, Friedrich A1 - Hopf, Henning T1 - Einstieg in die Physikalische Chemie für Nebenfächler T3 - Teubner Studienbücher Chemie N2 - Mit einer ausgewogenen Stoffauswahl wird der Leser an das Studium der Physikalischen Chemie herangeführt. Das Verständnis der Theorie wird durch zahlreiche Aufgabenstellungen und die Angabe ihrer Lösungswege erleichtert. Das vorliegende Buch gibt dem Studenten darüber hinaus Anregungen für ausgewählte Experimente zu den behandelten Teilgebieten. In der Durchführung und Auswertung der Experimente kann der Student erneut überprüfen, wie gut es ihm gelungen ist, ein Grundverständnis für physikalisch-chemische Zusammenhänge zu entwickeln. Y1 - 2001 SN - 3-519-00352-X U6 - https://doi.org/10.1007/978-3-322-94876-2 PB - Vieweg+Teubner Verlag CY - Wiesbaden ER - TY - JOUR A1 - Bechmann, Wolfgang A1 - Volkmer, Petra T1 - Einsatz der Mikrofestphasenextraktion in der Triazinanalytik Y1 - 1995 ER - TY - THES A1 - Bechthold, Nina T1 - Polymerisation in Miniemulsion N2 - Der Mechanismus der Miniemulsionsbildung bzw. polymerisation wird eingehend untersucht. Dabei werden Faktoren, wie die Tensidmenge, Ultraschalldauer und die Teilchengröße untersucht. Besonders werden auch noch Aspekte wie Stabilität der Emulsion und Kinetik während der Polymerisation untersucht. N2 - The mechanism of the formation and polymerisation of the miniemulsion respectively is thoroughly investigated. Parameters such as surfactant amount, duration of ultra sound and particle size are surveyed. Special emphasize is given to the aspects of stability of the emulsion and the kinetic of the polymerisation. ---- Anmerkung: Die Autorin wurde 2001 mit dem Publikationspreis des Leibniz-Kollegs Potsdam für Nachwuchswissenschaftler/innen in den Naturwissenschaften ausgezeichnet. KW - Miniemulsion KW - Emulsionspolymerisation Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0000204 ER - TY - JOUR A1 - Bechthold, Nina A1 - Tiersch, Brigitte A1 - Koetz, Joachim A1 - Friberg, Stig E. T1 - Structure Formation in polymer-modified liquid crystals Y1 - 1999 ER - TY - BOOK A1 - Becker, Frank M. A1 - Endisch, Claus A1 - Ernst, Christine ED - Ernst, Christine ED - Wehser, Adria T1 - Lehrbuch : Chemie ; 10 ; Berlin Y1 - 2000 SN - 3-89517-572-2 PB - Paetec, Verl. für Bildungsmedien CY - Berlin ER - TY - JOUR A1 - Becker, Thomas W. A1 - Peter, Martin G. A1 - Pool-Zobel, Beatrice L. T1 - Cellular effects of lignans : modulation of growth, oxidative DNA damage and cell metabolism in human colon cancer cells Y1 - 2000 ER - TY - JOUR A1 - Bedurke, Florian A1 - Klamroth, Tillmann A1 - Krause, Pascal A1 - Saalfrank, Peter T1 - Discriminating organic isomers by high harmonic generation BT - A time-dependent configuration interaction singles study JF - The journal of chemical physics : bridges a gap between journals of physics and journals of chemistr N2 - High Harmonic Generation (HHG) is a nonlinear optical process that provides a tunable source for high-energy photons and ultrashort laser pulses. Recent experiments demonstrated that HHG spectroscopy may also be used as an analytical tool to discriminate between randomly oriented configurational isomers of polyatomic organic molecules, namely, between the cis- and trans-forms of 1,2-dichloroethene (DCE) [M. C. H. Wong et al., Phys. Rev. A 84, 051403 (2011)]. Here, we suggest as an economic and at the same time a reasonably accurate method to compute HHG spectra for polyatomic species, Time-Dependent Configuration Interaction Singles (TD-CIS) theory in combination with extended atomic orbital bases and different models to account for ionization losses. The HHG spectra are computed for aligned and unaligned cis- and trans-DCE. For the unaligned case, a coherent averaging over possible rotational orientations is introduced. Furthermore, using TD-CIS, possible differences between the HHG spectra of cis- and trans-DCE are studied. For aligned molecules, spectral differences between cis and trans emerge, which can be related to their different point group symmetries. For unaligned, randomly oriented molecules, we also find distinct HHG spectra in partial agreement with experiment. In addition to HHG response in the frequency space, we compute time-frequency HHG spectra to gain insight into which harmonics are emitted at which time. Further differences between the two isomers emerge, suggesting time-frequency HHG as another tool to discriminate configurational isomers. Y1 - 2019 U6 - https://doi.org/10.1063/1.5096473 SN - 0021-9606 SN - 1089-7690 VL - 150 IS - 23 PB - American Institute of Physics CY - Melville ER - TY - JOUR A1 - Bedurke, Florian A1 - Klamroth, Tillmann A1 - Saalfrank, Peter T1 - Many-electron dynamics in laser-driven molecules BT - wavefunction theory vs. density functional theory JF - Physical chemistry, chemical physics : a journal of European Chemical Societies N2 - With recent experimental advances in laser-driven electron dynamics in polyatomic molecules, the need arises for their reliable theoretical modelling. Among efficient, yet fairly accurate methods for many-electron dynamics are Time-Dependent Configuration Interaction Singles (TD-CIS) (a Wave Function Theory (WFT) method), and Real-Time Time-Dependent Density Functional Theory (RT-TD-DFT), respectively. Here we compare TD-CIS combined with extended Atomic Orbital (AO) bases, TD-CIS/AO, with RT-TD-DFT in a grid representation of the Kohn-Sham orbitals, RT-TD-DFT/Grid. Possible ionization losses are treated by complex absorbing potentials in energy space (for TD-CIS/AO) or real space (for RT-TD-DFT), respectively. The comparison is made for two test cases: (i) state-to-state transitions using resonant lasers (pi-pulses), i.e., bound electron motion, and (ii) large-amplitude electron motion leading to High Harmonic Generation (HHG). Test systems are a H-2 molecule and cis- and trans-1,2-dichlorethene, C2H2Cl2, (DCE). From time-dependent electronic energies, dipole moments and from HHG spectra, the following observations are made: first, for bound state-to-state transitions enforced by pi-pulses, TD-CIS nicely accounts for the expected population inversion in contrast to RT-TD-DFT, in agreement with earlier findings. Secondly, when using laser pulses under non-resonant conditions, dipole moments and lower harmonics in HHG spectra are obtained by TD-CIS/AO which are in good agreement with those obtained with RT-TD-DFT/Grid. Deviations become larger for higher harmonics and at low laser intensities, i.e., for low-intensity HHG signals. We also carefully test effects of basis sets for TD-CIS/AO and grid size for RT-TD-DFT/Grid, different exchange-correlation functionals in RT-TD-DFT, and absorbing boundaries. Finally, for the present examples, TD-CIS/AO is observed to be at least an order of magnitude more computationally efficient than RT-TD-DFT/Grid. Y1 - 2021 U6 - https://doi.org/10.1039/d1cp01100f SN - 1463-9076 SN - 1463-9084 VL - 23 IS - 24 SP - 13544 EP - 13560 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Behl, Marc A1 - Balk, Maria A1 - Lützow, Karola A1 - Lendlein, Andreas T1 - Impact of block sequence on the phase morphology of multiblock copolymers obtained by high-throughput robotic synthesis JF - European polymer journal : EPJ N2 - The chemical nature, the number length of integrated building blocks, as well as their sequence structure impact the phase morphology of multiblock copolymers (MBC) consisting of two non-miscible block types. We hypothesized that a strictly alternating sequence should favour phase segregation and in this way the elastic properties. A library of well-defined MBCs composed of two different hydrophobic, semi-crystalline blocks providing domains with well-separated melting temperatures (T(m)s) were synthesized from the same type of precursor building blocks as strictly alternating (MBCsalt) or random (MBCsran) MBCs and compared. Three different series of MBCsalt or MBCsran were synthesized by high-throughput synthesis by coupling oligo(e-caprolactone) (OCL) of different molecular weights (2, 4, and 8 kDa) with oligotetrahydrofuran (OTHF, 2.9 kDa) via Steglich esterification in which the molar ratio of the reaction partners was slightly adjusted. Maximum of weight average molecular weight (M-w) were 65,000 g center dot mol(-1), 165,000 g center dot mol(-1), and 168,000 g center dot mol(-1) for MBCsalt and 80,500 g center dot mol(-1), 100,000 g center dot mol(-1), and 147,600 g center dot mol(-1) for MBCsran. When Mw increased, a decrease of both Tms associated to the melting of the OCL and OTHF domains was observed for all MBCs. T-m (OTHF) of MBCsran was always higher than Tm (OTHF) of MBCsalt, which was attributed to a better phase segregation. In addition, the elongation at break of MBCsalt was almost half as high when compared to MBCsran. In this way this study elucidates role of the block length and sequence structure in MBCs and enables a quantitative discussion of the structure-function relationship when two semi-crystalline block segments are utilized for the design of block copolymers. KW - Multiblock copolymers KW - Sequence structure KW - Phase morphology KW - Polymer KW - library KW - Robotic synthesis KW - High-throughput Y1 - 2021 U6 - https://doi.org/10.1016/j.eurpolymj.2020.110207 SN - 0014-3057 SN - 1873-1945 VL - 143 PB - Elsevier CY - Oxford ER - TY - JOUR A1 - Behl, Marc A1 - Balk, Maria A1 - Mansfeld, Ulrich A1 - Lendlein, Andreas T1 - Phase morphology of multiblock copolymers differing in sequence of blocks JF - Macromolecular materials and engineering N2 - The chemical nature, the number length of integrated building blocks, as well as their sequence structure impact the phase morphology of multiblock copolymers (MBC) consisting of two non-miscible block types. It is hypothesized that a strictly alternating sequence should impact phase segregation. A library of well-defined MBC obtained by coupling oligo(epsilon-caprolactone) (OCL) of different molecular weights (2, 4, and 8 kDa) with oligotetrahydrofuran (OTHF, 2.9 kDa) via Steglich esterification results in strictly alternating (MBCalt) or random (MBCran) MBC. The three different series has a weight average molecular weight (M-w) of 65 000, 165 000, and 168 000 g mol(-1) for MBCalt and 80 500, 100 000, and 147 600 g mol(-1) for MBCran. When the chain length of OCL building blocks is increased, the tendency for phase segregation is facilitated, which is attributed to the decrease in chain mobility within the MBC. Furthermore, it is found that the phase segregation disturbs the crystallization by causing heterogeneities in the semi-crystalline alignment, which is attributed to an increase of the disorder of the OCL semi-crystalline alignment. KW - electron microscopy KW - multiblock copolymers KW - phase morphology KW - polymer KW - libraries KW - sequence structures KW - wide angle x‐ ray scattering Y1 - 2021 U6 - https://doi.org/10.1002/mame.202000672 SN - 1439-2054 VL - 306 IS - 3 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Behl, Marc A1 - Razzaq, Muhammad Yasar A1 - Mazurek-Budzynska, Magdalena A1 - Lendlein, Andreas T1 - Polyetheresterurethane based porous scaffolds with tailorable architectures by supercritical CO2 foaming JF - MRS advances N2 - Porous three-dimensional (3D) scaffolds are promising treatment options in regenerative medicine. Supercritical and dense-phase fluid technologies provide an attractive alternative to solvent-based scaffold fabrication methods. In this work, we report on the fabrication of poly-etheresterurethane (PPDO-PCL) based porous scaffolds with tailorable pore size, porosity, and pore interconnectivity by using supercritical CO2(scCO(2)) fluid-foaming. The influence of the processing parameters such as soaking time, soaking temperature and depressurization on porosity, pore size, and interconnectivity of the foams were investigated. The average pore diameter could be varied between 100-800 mu m along with a porosity in the range from (19 +/- 3 to 61 +/- 6)% and interconnectivity of up to 82%. To demonstrate their applicability as scaffold materials, selected foams were sterilized via ethylene oxide sterilization. They showed negligible cytotoxicity in tests according to DIN EN ISO 10993-5 and 10993-12 using L929 cells. The study demonstrated that the pore size, porosity and the interconnectivity of this multi-phase semicrystalline polymer could be tailored by careful control of the processing parameters during the scCO(2)foaming process. In this way, PPDO-PCL scaffolds with high porosity and interconnectivity are potential candidate materials for regenerative treatment options. Y1 - 2020 U6 - https://doi.org/10.1557/adv.2020.345 SN - 2059-8521 VL - 5 IS - 45 SP - 2317 EP - 2330 PB - Cambridge University Press CY - New York, NY ER - TY - JOUR A1 - Behl, Marc A1 - Zhao, Qian A1 - Lendlein, Andreas T1 - Glucose-responsive shape-memory cryogels JF - Journal of materials research : JMR N2 - Boronic ester bonds can be reversibly formed between phenylboronic acid (PBA) and triol moieties. Here, we aim at a glucose-induced shape-memory effect by implementing such bonds as temporary netpoints, which are cleavable by glucose and by minimizing the volume change upon stimulation by a porous cryogel structure. The polymer system consisted of a semi-interpenetrating network (semi-IPN) architecture, in which the triol moieties were part of the permanent network and the PBA moieties were located in the linear polymer diffused into the semi-IPN. In an alkaline medium (pH = 10), the swelling ratio was approximately 35, independent of C-glu varied between 0 and 300 mg/dL. In bending experiments, shape fixity R-f approximate to 80% and shape recovery R-r approximate to 100% from five programming/recovery cycles could be determined. R-r was a function of C-glu in the range from 0 to 300 mg/dL, which accords with the fluctuation range of C-glu in human blood. In this way, the shape-memory hydrogels could play a role in future diabetes treatment options. KW - shape memory KW - polymer KW - porosity Y1 - 2020 U6 - https://doi.org/10.1557/jmr.2020.204 SN - 0884-2914 SN - 2044-5326 VL - 35 IS - 18 SP - 2396 EP - 2404 PB - Springer CY - Berlin ER - TY - THES A1 - Behrends, Nicole T1 - Funktionalisierte OS(T)K-Stäbe und Sensorfluorophore zur optischen Sensorik T1 - Functionalized OS(T)K-rods and dyes for optical sensor systems N2 - Im Rahmen dieser Arbeit wurden zum einen erste Oligospiro(thio)ketal (OS(T)K)-basierte Modellsysteme (molekulare Sonden) für abstandsabhängige Messungen mittels Förster-Resonanz-Energietransfer (FRET) und zum anderen Sensorfluorophore, basierend auf einem DBD-Fluorophor und BAPTA, zur Messung der intrazellulären Calcium-Konzentration dargestellt. Für die Synthese von molekularen Sonden für abstandsabhängige Messungen wurden verschiedenste einfach- und doppelt-markierte OS(T)K-Stäbe entwickelt und spektroskopisch untersucht. Die OS(T)K-Stäbe, sogenannte molekulare Stäbe, dienten als starre Abstandshalter zwischen den Fluorophoren. Als Fluorophore wurden Derivate von 6,7-Dihydroxy-4-methylcoumarin (Donor) und Acyl-DBD (Akzeptor) verwendet, die zusammen ein FRET-Paar bilden. Die Fluorophore wurden so funktionalisiert, dass sie sowohl unbeweglich bzw. „starr“, als auch beweglich bzw. „flexibel“ an den OS(T)K-Stab gebunden werden konnten. Für die Synthese der OS(T)K-Stäbe wurden ebenfalls eine Reihe an unterschiedlich langen und kurzen Stabbausteinen synthetisiert. Auf diese Weise wurden eine Vielzahl an verschiedensten einfach- und doppelt-markierten OS(T)K-Stäben dargestellt, deren Fluorophore sowohl „starr“ als auch „flexibel“ gebunden sind. Die dargestellten Stäbe wurden in verschiedensten Lösungsmitteln spektroskopisch untersucht, um anschließend das Verhalten in Vesikel, die eine biomimetische Umgebung darstellen, zu beurteilen. Es wurde festgestellt, dass sich die Stäbe erfolgreich in die Vesikelmembran einlagerten und hohe FRET-Effizienzen aufweisen. Des Weiteren wurde ein FRET-Paar dargestellt, das sich durch 2-Photonenabsorpion im NIR-Bereich anregen lässt. Es wurde in den lebenden Zellen mittels Fluoreszenzlebenszeitmikroskopie (FLIM) untersucht. Zur Untersuchung von intrazellulärem Calcium wurden zwei verschiedene DBD-Fluorophore über einen kurzen Linker mit dem Calcium-Chelator BAPTA verknüpft. Die dargestellten Fluorophore wurden sowohl in vitro als auch in vivo auf ihre Calcium-Sensitivität überprüft. Mittels FLIM wurden in lebenden Zellen die Fluoreszenzlebenszeitverteilungen der Fluorophore nach Calcium-Konzentrationsänderungen detektiert. N2 - In this work, Oligospiro(thio)ketal (OS(T)K)-based model systems (molecular probes) for distance-dependent measurements by Förster resonance energy transfer (FRET) and sensor dyes, based on [1,3]dioxolo[4,5-f][1,3]benzodioxole (DBD) dyes and BAPTA, for measuring the intracellular calcium concentration, were presented. For synthesis of molecular probes, for distance-dependent measurements, various single and double-labeled OS(T)K rods were developed and examined spectroscopically. The OS(T)K rods, called molecular rods, served as rigid spacers between the fluorophores. The FRET pairs consist of a Coumarin (Cou) dye as donor and a DBD dye as acceptor. Cou and DBD were functionalized in such a way that they could be connected both "rigid" as well as "flexible" to the OS(T)K rod. For synthesis of the OS(T)K rods, a number of different long and short rod units were synthesized. In this way, a variety of different single- and double-labeled OS(T)K rods were presented. The rods were spectroscopically analyzed in various solvents to subsequently evaluate the behavior in large unilamellar vesicles (LUVs) that represent a biomimetic system for cell membranes. It was found that the rods successfully incorporated in the vesicle membrane. Furthermore, a FRET pair was shown that can be excited by 2-photon absorption in the NIR region. It was examined in living cells by fluorescence lifetime microscopy (FLIM). To study intracellular calcium, two different DBD dyes were linked via a short linker to the calcium chelator BAPTA. The dyes were examined for their calcium sensitivity both in vitro and in vivo. Using FLIM, the fluorescence lifetime distributions of the dyes were detected in living cells after calcium concentration changes. KW - DBD KW - Coumarin KW - FRET KW - BAPTA KW - Calcium KW - 2P-FRET KW - OSK KW - OSTK KW - molekulare Stäbe KW - DBD KW - coumarin KW - FRET KW - BAPTA KW - calcium KW - 2P-FRET KW - OSK KW - OSTK KW - molecular rods Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-404213 ER - TY - THES A1 - Behrendt, Felix Nicolas T1 - New bio-based polymers T1 - Neue biobasierte Polymere BT - synthesis and polymerization of cystine-based macrocycles BT - Synthese und Polymerisation von cystinbasierten Makrozyklen N2 - Redox-responsive polymers, such as poly(disulfide)s, are a versatile class of polymers with potential applications including gene- and drug-carrier systems. Their degradability under reductive conditions allows for a controlled response to the different redox states that are present throughout the body. Poly(disulfide)s are typically synthesized by step growth polymerizations. Step growth polymerizations, however, may suffer from low conversions and therefore low molar masses, limiting potential applications. The purpose of this thesis was therefore to find and investigate new synthetic routes towards the synthesis of amino acid-based poly(disulfide)s. The different routes in this thesis include entropy-driven ring opening polymerizations of novel macrocyclic monomers, derived from cystine derivatives. These monomers were obtained with overall yields of up to 77% and were analyzed by mass spectrometry as well as by 1D and 2D NMR spectroscopy. The kinetics of the entropy-driven ring-opening metathesis polymerization (ED-ROMP) were thoroughly investigated in dependence of temperature, monomer concentration, and catalyst concentration. The polymerization was optimized to yield poly(disulfide)s with weight average molar masses of up to 80 kDa and conversions of ~80%, at the thermodynamic equilibrium. Additionally, an alternative metal free polymerization, namely the entropy-driven ring-opening disulfide metathesis polymerization (ED-RODiMP) was established for the polymerization of the macrocyclic monomers. The effect of different solvents, concentrations and catalyst loadings on the polymerization process and its kinetics were studied. Polymers with very high weight average molar masses of up to 177 kDa were obtained. Moreover, various post-polymerization reactions were successfully performed. This work provides the first example of the homopolymerization of endo-cyclic disulfides by ED-ROMP and the first substantial study into the kinetics of the ED-RODiMP process. N2 - Redoxresponsive Polymere, wie etwa Polydisulfide, sind eine vielseitige Klasse von Polymeren, die unter anderem als Gen- und Wirkstoffträgersysteme eingesetzt werden können. Ihre Abbaubarkeit unter reduktiven Bedingungen ermöglicht eine kontrollierte Reaktion auf die verschiedenen Redoxzustände im Körper. Polydisulfide werden jedoch häufig durch Stufenwachstums-polymerisationen synthetisiert. Diese führen oft zu niedrigen Umsätzen und daher zu niedrigen molaren Massen. Das Ziel dieser Arbeit war daher neue Synthesewege für aminosäurebasierte Polydisulfide zu finden und zu untersuchen. Diese Wege beinhalteten entropiegetriebene ringöffnende Polymerisationen von neuen makrozyklischen Monomeren, auf der Basis von Cystin-Derivaten. Diese Monomere konnten mit einer Gesamtausbeute von bis zu 77% synthetisiert werden und wurden mit Massenspektrometrie sowie mit 1D- und 2D-NMR-Spektroskopie analysiert. Die Kinetik der entropiegetriebenen ringöffnenden Metathese Polymerisation (ED-ROMP) wurde im Hinblick auf Temperatur, Monomerkonzentration und Katalysatormenge sorgfältig untersucht. Durch Optimierungen konnten Polydisulfide mit gewichtsmittleren Molmassen von bis zu 80 kDa und Umsätzen von ~80%, im thermodynamischen Gleichgewicht synthetisiert werden. Zusätzlich wurde eine alternative metallfreie Polymerisation, die entropiegetriebene ringöffnende Disulfidmetathese Polymerisation (ED-RODiMP), für die Polymerisation der makrozyklischen Monomere etabliert. Die Auswirkungen verschiedener Lösungsmittel, Konzentrationen und Katalysatorkonzentrationen auf die Kinetik dieses Polymerisationsprozesses wurden untersucht. Hierdurch wurden Polymere mit sehr hohen gewichtsmittleren Molmassen von bis zu 177 kDa erhalten. Darüber hinaus wurden verschiedene Postpolymerisationsreaktionen erfolgreich durchgeführt. Diese Arbeit liefert das erste Beispiel für die Homopolymerisation endo-zyklischer Disulfide durch ROMP und eine erste substanzielle Studie der Kinetik des ED-RODiMP-Prozesses. KW - polymers KW - ADMET KW - ROMP KW - disulfide KW - macrocycles KW - ring-opening polymerization KW - amino acids KW - Polymere KW - ADMET KW - ROMP KW - Disulfide KW - Makrozyklen KW - ringöffnende Polymerisation KW - Aminosäuren Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-418316 ER - TY - JOUR A1 - Behrendt, Felix Nicolas A1 - Hess, Andreas A1 - Lehmann, Max A1 - Schmidt, Bernd A1 - Schlaad, Helmut T1 - Polymerization of cystine-derived monomers JF - Polymer Chemistry N2 - Cystine was used as a platform chemical to prepare cyclic and acyclic monomers for entropy-driven ringopening polymerization (ED-ROMP) via olefin or disulfide metathesis and for step-growth polymerization. The olefin ED-ROMP of an olefin/disulfide containing 16-atom macrocycle using the 3rd generation Grubbs catalyst was examined in greater detail. Kinetic studies revealed that the catalyst turned inactive during the polymerization, which limited the achievable (apparent) polymer molar mass to similar to 70 kg mol(-1). Such limitation could be overcome with the disulfide ED-ROMP of the same macrocycle to yield polymers with molar masses of up to 180 kg mol(-1). The step-growth polymerizations of acyclic diene and dithiol monomers via olefin metathesis or oxidation were far less effective and yielded just low molar mass polymers or oligomers; photopolymerization of a thiol-ene monomer produced a polyester with a molar mass of 35 kg mol(-1). Y1 - 2019 U6 - https://doi.org/10.1039/c9py00118b SN - 1759-9954 SN - 1759-9962 VL - 10 IS - 13 SP - 1636 EP - 1641 PB - Royal Society of Chemistry CY - Cambridge ER - TY - GEN A1 - Behrendt, Felix Nicolas A1 - Schlaad, Helmut T1 - Metathesis polymerization of cystine-based macrocycles N2 - Macrocycles based on L-cystine were synthesized by ring-closing metathesis (RCM) and subsequently polymerized by entropy-driven ring-opening metathesis polymerization (ED-ROMP). Monomer conversion reached ∼80% in equilibrium and the produced poly(ester-amine-disulfide-alkene)s exhibited apparent molar masses (Mappw) of up to 80 kDa and dispersities (Đ) of ∼2. The polymers can be further functionalized with acid anhydrides and degraded by reductive cleavage of the main-chain disulfide. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 329 Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-395080 ER - TY - JOUR A1 - Behrendt, Felix Nicolas A1 - Schlaad, Helmut T1 - Entropy-Driven Ring-Opening Disulfide Metathesis Polymerization for the Synthesis of Functional Poly(disulfide)s JF - Macromolecular rapid communications N2 - Metal-free entropy-driven disulfide metathesis polymerization of unsaturated L-cystine based macrocycles produces high-molar-mass heterofunctional poly(disulfide)s, i.e., poly(ester-disulfide-alkene) and poly(amide-disulfide-alkene); M-w(app) = 44-60 kDa, (sic) > 1.7. The polymerization is fast and reaches equilibrium within 1-5 minutes (monomer conversion 70-90%) in polar aprotic solvents such as N,N-dimethylacetamide, dimethylsulfoxide, or y-valerolactone. Thiol-terminated polymers are stable in bulk or when dissolved in weakly polar solvents, but rapidly depolymerize in dilute polar solution. KW - disulfide KW - macrocycles KW - metathesis KW - ring-opening polymerization Y1 - 2018 U6 - https://doi.org/10.1002/marc.201700735 SN - 1022-1336 SN - 1521-3927 VL - 39 IS - 6 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Behrendt, Felix Nicolas A1 - Schlaad, Helmut T1 - Metathesis polymerization of cystine-based macrocycles JF - Polymer Chemistry N2 - Macrocycles based on L-cystine were synthesized by ring-closing metathesis (RCM) and subsequently polymerized by entropy-driven ring-opening metathesis polymerization (ED-ROMP). Monomer conversion reached similar to 80% in equilibrium and the produced poly (ester-amine-disulfide-alkene)s exhibited apparent molar masses (M-w(app)) of up to 80 kDa and dispersities (D) of similar to 2. The polymers can be further functionalized with acid anhydrides and degraded by reductive cleavage of the main-chain disulfide. Y1 - 2016 U6 - https://doi.org/10.1039/c6py01864e SN - 1759-9954 SN - 1759-9962 VL - 8 IS - 2 SP - 366 EP - 369 PB - Royal Society of Chemistry CY - Cambridge ER - TY - THES A1 - Behrens, Karsten T1 - Mikrowellen-assistierte Synthese von IFPs und Darstellung von lumineszierenden Lanthanid-IFP-Materialien Y1 - 2017 ER - TY - GEN A1 - Behrens, Karsten A1 - Balischewski, Christian A1 - Sperlich, Eric A1 - Menski, Antonia Isabell A1 - Balderas-Valadez, Ruth Fabiola A1 - Pacholski, Claudia A1 - Günter, Christina A1 - Lubahn, Susanne A1 - Kelling, Alexandra A1 - Taubert, Andreas T1 - Mixed chloridometallate(ii) ionic liquids with tunable color and optical response for potential ammonia sensors T2 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Eight d-metal-containing N-butylpyridinium ionic liquids (ILs) with the nominal composition (C4Py)2[Ni0.5M0.5Cl4] or (C4Py)2[Zn0.5M0.5Cl4] (M = Cu, Co, Mn, Ni, Zn; C4Py = N-butylpyridinium) were synthesized, characterized, and investigated for their optical properties. Single crystal and powder X-ray analysis shows that the compounds are isostructural to existing examples based on other d-metal ions. Inductively coupled plasma optical emission spectroscopy measurements confirm that the metal/metal ratio is around 50 : 50. UV-Vis spectroscopy shows that the optical absorption can be tuned by selection of the constituent metals. Moreover, the compounds can act as an optical sensor for the detection of gases such as ammonia as demonstrated via a simple prototype setup. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1316 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-587512 SN - 1866-8372 IS - 1316 SP - 35072 EP - 35082 ER - TY - JOUR A1 - Behrens, Karsten A1 - Balischewski, Christian A1 - Sperlich, Eric A1 - Menski, Antonia Isabell A1 - Balderas-Valadez, Ruth Fabiola A1 - Pacholski, Claudia A1 - Günter, Christina A1 - Lubahn, Susanne A1 - Kelling, Alexandra A1 - Taubert, Andreas T1 - Mixed chloridometallate(ii) ionic liquids with tunable color and optical response for potential ammonia sensors JF - RSC Advances N2 - Eight d-metal-containing N-butylpyridinium ionic liquids (ILs) with the nominal composition (C4Py)2[Ni0.5M0.5Cl4] or (C4Py)2[Zn0.5M0.5Cl4] (M = Cu, Co, Mn, Ni, Zn; C4Py = N-butylpyridinium) were synthesized, characterized, and investigated for their optical properties. Single crystal and powder X-ray analysis shows that the compounds are isostructural to existing examples based on other d-metal ions. Inductively coupled plasma optical emission spectroscopy measurements confirm that the metal/metal ratio is around 50 : 50. UV-Vis spectroscopy shows that the optical absorption can be tuned by selection of the constituent metals. Moreover, the compounds can act as an optical sensor for the detection of gases such as ammonia as demonstrated via a simple prototype setup. Y1 - 2022 U6 - https://doi.org/10.1039/d2ra05581c SN - 2046-2069 VL - 12 SP - 35072 EP - 35082 PB - RSC CY - London ER - TY - JOUR A1 - Behrens, Karsten A1 - Mondal, Suvendu Selchar A1 - Nöske, Robert A1 - Baburin, Igor A. A1 - Leoni, Stefano A1 - Günter, Christina A1 - Weber, Jens A1 - Holdt, Hans-Jürgen T1 - Microwave-Assisted Synthesis of Defects Metal-Imidazolate-Amide-Imidate Frameworks and Improved CO2 Capture JF - Inorganic chemistry N2 - In this work, we report three isostructural 3D frameworks, named IFP-11 (R = Cl), IFP-12 (R = Br), and IFP-13 (R = Et) (IFP = Imidazolate Framework Potsdam) based on a cobalt(II) center and the chelating linker 2-substituted imidazolate-4-amide-5-imidate. These chelating ligands were generated in situ by partial hydrolysis of 2-substituted 4,5-dicyanoimidazoles under microwave (MW)-assisted conditions in DMF. Structure determination of these IFPs was investigated by IR spectroscopy and a combination of powder X-ray diffraction (PXRD) with structure modeling. The structural models were initially built up from the single-crystal X-ray structure determination of IFP-5 (a cobalt center and 2-methylimidazolate-4-amide-5-imidate linker based framework) and were optimized by using density functional theory calculations. Substitution on position 2 of the linker (R = Cl, Br, and Et) in the isostructural IFP-11, -12, and -13 allowed variation of the potential pore window in 1D hexagonal channels (3.8 to 1.7 angstrom A). The potential of the materials to undergo specific interactions with CO2 was measured by the isosteric heat adsorption. Further, we resynthesized zinc based IFPs, namely IFP-1 = Me), IFP-2 (R = Cl), IFP-3 (R = Br), and IFP-4 (R = Et), and cobalt based IFP-5 under MW-assisted conditions with higher yield. The transition from a nucleation phase to the pure crystalline material of IFP-1 in MW-assisted synthesis depends on reaction time. IFP-1, -3, and -5, which are synthesized by MW-assisted conditions, showed an enhancement of N-2 and CO2, compared to the analogous conventional electrical (CE) heating method based materials due to crystal defects. Y1 - 2015 U6 - https://doi.org/10.1021/acs.inorgchem.5b01952 SN - 0020-1669 SN - 1520-510X VL - 54 IS - 20 SP - 10073 EP - 10080 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Beisebekov, Madiar Maratovich A1 - Serikpayeva, Saniya B. A1 - Zhumagalieva, Shynar Nurlanovna A1 - Beisebekov, Marat Kianovich A1 - Abilov, Zharylkasyn Abduachitovich A1 - Kosmella, Sabine A1 - Koetz, Joachim T1 - Interactions of bentonite clay in composite gels of non-ionic polymers with cationic surfactants and heavy metal ions JF - Colloid and polymer science : official journal of the Kolloid-Gesellschaft N2 - Chemically cross-linked composite gels based on bentonite clay from Manyrak deposit (Kazakhstan Republic) and nonionic polymers, i.e., poly(hydroxyethylacrylate) and poly(acrylamide), were polymerized in situ after preliminary intercalation of monomers in an aqueous suspension of bentonite clay. By means of cryo-scanning electron microscopy, it was shown that bentonite clay is well incorporated into the gel network structure with pore sizes up to 1.5 mu m. The intercalated bentonite clay can adsorb cationic surfactants as well as heavy metal ions due to electrostatic interactions. Conductometric and surface tension measurements indicate not only the adsorption of surfactants and heavy metals inside the hydrogel, but also the displacement of the critical micellization concentration (CMC) of the surfactants. KW - Bentonite clay KW - Cationic surfactants KW - Heavy metal ions KW - Composite hydrogels Y1 - 2015 U6 - https://doi.org/10.1007/s00396-014-3463-x SN - 0303-402X SN - 1435-1536 VL - 293 IS - 2 SP - 633 EP - 639 PB - Springer CY - New York ER - TY - THES A1 - Beitz, Toralf T1 - Photochemische Reaktionen ausgewählter Azaarene in natürlichen Gewässern Y1 - 1996 ER - TY - JOUR A1 - Beitz, Toralf A1 - Bechmann, Wolfgang A1 - Mitzner, Rolf T1 - Investigations of reactions of selected Azaarenes with radicals in water, 2. Chlorine and Bromine radicals Y1 - 1998 ER - TY - JOUR A1 - Beitz, Toralf A1 - Bechmann, Wolfgang A1 - Mitzner, Rolf T1 - Investigations of reactions of selected Azaarenes with radicals in water, 1. Hydroxyl and sulfate radicals Y1 - 1998 ER - TY - JOUR A1 - Beitz, Toralf A1 - Bechmann, Wolfgang A1 - Mitzner, Rolf T1 - Investigation on the photoreactions of Nitrate and Nitrite ions with selected Azaarenes in water Y1 - 1999 ER - TY - JOUR A1 - Beitz, Toralf A1 - Koetz, Joachim A1 - Friberg, Stig E. T1 - Polymer-modified ionic microemulsion formed in the system SDS/Water/Xylene/Pentanol Y1 - 1999 ER - TY - JOUR A1 - Beitz, Toralf A1 - Koetz, Joachim A1 - Wolf, Gunter A1 - Kleinpeter, Erich A1 - Friberg, Stig E. T1 - Poly(N-vinyl-2-pyrrolidone) and 1-octyl-2-pyrrolidinone modified ionic microemulsions Y1 - 2001 ER - TY - JOUR A1 - Beitz, Toralf A1 - Laudien, Robert A1 - Löhmannsröben, Hans-Gerd A1 - Kallies, Bernd T1 - Ion mobility spectrometric investigation of aromatic cations in the gas phase N2 - In this work, ion mobility (IM) spectra of more than 50 aromatic compounds were recorded with a laser-based IM spectrometer at atmospheric pressure. IM spectra of PAH in the laser desorption experiment show a high complexity resulting from the occurrence of monomeric, dimeric, and oligomeric cluster ions. The mobilities of all compounds were determined in helium as drift gas. This allows the calculation of the diffusion cross sections (Omega(calc)) on the basis of the exact hard sphere scattering model and their comparison with the experimentally determined diffusion cross sections (Omega(exp)). Extended Omega(exp)/Omega(calc) and Omega(exp/)mass correlations were performed in order to gain insight into conformational properties of cationic alkyl benzenes and internal rotation of phenyl rings in aromatic ions. This is demonstrated with some examples, such as the evaluation of the dihedral angle of the ions of 9,10- diphenylanthracene, o- and m-terphenyl, and 1,2,3- and 1,3,5-triphenylbenzene. Furthermore, sandwich and T-structures of dimeric PAH cations are discussed. The analysis was extended to oligomeric ions with up to nine monomer units. Experimental evidence is presented suggesting the formation of pi-stacks with a transition toward modified pi-stacks with increasing cluster size. The distance between monomeric units in dimeric and oligomeric ions was obtained Y1 - 2006 UR - http://pubs.acs.org/journal/jpcafh U6 - https://doi.org/10.1021/Jp055335n SN - 1089-5639 ER - TY - JOUR A1 - Bekir, Marek A1 - Jelken, Joachim A1 - Jung, Se-Hyeong A1 - Pich, Andrij A1 - Pacholski, Claudia A1 - Kopyshev, Alexey A1 - Santer, Svetlana T1 - Dual responsiveness of microgels induced by single light stimulus JF - Applied physics letters N2 - We report on the multiple response of microgels triggered by a single optical stimulus. Under irradiation, the volume of the microgels is reversibly switched by more than 20 times. The irradiation initiates two different processes: photo-isomerization of the photo-sensitive surfactant, which forms a complex with the anionic microgel, rendering it photo-responsive; and local heating due to a thermo-plasmonic effect within the structured gold layer on which the microgel is deposited. The photo-responsivity is related to the reversible accommodation/release of the photo-sensitive surfactant depending on its photo-isomerization state, while the thermo-sensitivity is intrinsically built in. We show that under exposure to green light, the thermo-plasmonic effect generates a local hot spot in the gold layer, resulting in the shrinkage of the microgel. This process competes with the simultaneous photo-induced swelling. Depending on the position of the laser spot, the spatiotemporal control of reversible particle shrinking/swelling with a predefined extent on a per-second base can be implemented. Y1 - 2021 U6 - https://doi.org/10.1063/5.0036376 SN - 0003-6951 SN - 1077-3118 VL - 118 IS - 9 PB - American Institute of Physics CY - Melville ER - TY - JOUR A1 - Belasri, Khadija A1 - Topal, Leila A1 - Heydenreich, Matthias A1 - Koch, Andreas A1 - Kleinpeter, Erich A1 - Fulop, Ferenc A1 - Szatmari, Istvan T1 - Synthesis and conformational analysis of naphthoxazine-fused phenanthrene derivatives JF - Molecules N2 - The synthesis of new phenanthr[9,10-e][1,3]oxazines was achieved by the direct coupling of 9-phenanthrol with cyclic imines in the modified aza-Friedel-Crafts reaction followed by the ring closure of the resulting bifunctional aminophenanthrols with formaldehyde. Aminophenanthrol-type Mannich bases were synthesised and transformed to phenanthr[9,10-e][1,3]oxazines via [4 + 2] cycloaddition. Detailed NMR structural analyses of the new polyheterocycles as well as conformational studies including Density Functional Theory (DFT) modelling were performed. The relative stability of ortho-quinone methides (o-QMs) was calculated, the geometries obtained were compared with the experimentally determined NMR structures, and thereby, the regioselectivity of the reactions has been assigned. KW - modified Mannich reaction KW - cyclic imines KW - [4+2] cycloaddition KW - NMR KW - spectroscopy KW - conformational analysis KW - DFT calculations Y1 - 2020 U6 - https://doi.org/10.3390/molecules25112524 SN - 1420-3049 VL - 25 IS - 11 PB - MDPI CY - Basel ER - TY - THES A1 - Bellin, Ingo T1 - Thermosensitive Polymer Networks with Two Different Shapes in Memory Y1 - 2006 CY - Potsdam ER - TY - THES A1 - Belova, Valentina T1 - Composite fabrication and surface modification via high intensity ultrasound Y1 - 2010 CY - Potsdam ER -