TY - BOOK A1 - Abedjan, Ziawasch A1 - Golab, Lukasz A1 - Naumann, Felix A1 - Papenbrock, Thorsten T1 - Data Profiling T3 - Synthesis lectures on data management, 52 Y1 - 2019 SN - 978-1-68173-446-0 PB - Morgan & Claypool Publishers CY - San Rafael ER - TY - BOOK A1 - Abedjan, Ziawasch A1 - Naumann, Felix T1 - Advancing the discovery of unique column combinations N2 - Unique column combinations of a relational database table are sets of columns that contain only unique values. Discovering such combinations is a fundamental research problem and has many different data management and knowledge discovery applications. Existing discovery algorithms are either brute force or have a high memory load and can thus be applied only to small datasets or samples. In this paper, the wellknown GORDIAN algorithm and "Apriori-based" algorithms are compared and analyzed for further optimization. We greatly improve the Apriori algorithms through efficient candidate generation and statistics-based pruning methods. A hybrid solution HCAGORDIAN combines the advantages of GORDIAN and our new algorithm HCA, and it significantly outperforms all previous work in many situations. N2 - Unique-Spaltenkombinationen sind Spaltenkombinationen einer Datenbanktabelle, die nur einzigartige Werte beinhalten. Das Finden von Unique-Spaltenkombinationen spielt sowohl eine wichtige Rolle im Bereich der Grundlagenforschung von Informationssystemen als auch in Anwendungsgebieten wie dem Datenmanagement und der Erkenntnisgewinnung aus Datenbeständen. Vorhandene Algorithmen, die dieses Problem angehen, sind entweder Brute-Force oder benötigen zu viel Hauptspeicher. Deshalb können diese Algorithmen nur auf kleine Datenmengen angewendet werden. In dieser Arbeit werden der bekannte GORDIAN-Algorithmus und Apriori-basierte Algorithmen zum Zwecke weiterer Optimierung analysiert. Wir verbessern die Apriori Algorithmen durch eine effiziente Kandidatengenerierung und Heuristikbasierten Kandidatenfilter. Eine Hybride Lösung, HCA-GORDIAN, kombiniert die Vorteile von GORDIAN und unserem neuen Algorithmus HCA, welche die bisherigen Algorithmen hinsichtlich der Effizienz in vielen Situationen übertrifft. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 51 KW - Apriori KW - eindeutig KW - funktionale Abhängigkeit KW - Schlüsselentdeckung KW - Data Profiling KW - apriori KW - unique KW - functional dependency KW - key discovery KW - data profiling Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-53564 SN - 978-3-86956-148-6 SN - 1613-5652 SN - 2191-1665 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Albrecht, Alexander A1 - Naumann, Felix T1 - Understanding cryptic schemata in large extract-transform-load systems N2 - Extract-Transform-Load (ETL) tools are used for the creation, maintenance, and evolution of data warehouses, data marts, and operational data stores. ETL workflows populate those systems with data from various data sources by specifying and executing a DAG of transformations. Over time, hundreds of individual workflows evolve as new sources and new requirements are integrated into the system. The maintenance and evolution of large-scale ETL systems requires much time and manual effort. A key problem is to understand the meaning of unfamiliar attribute labels in source and target databases and ETL transformations. Hard-to-understand attribute labels lead to frustration and time spent to develop and understand ETL workflows. We present a schema decryption technique to support ETL developers in understanding cryptic schemata of sources, targets, and ETL transformations. For a given ETL system, our recommender-like approach leverages the large number of mapped attribute labels in existing ETL workflows to produce good and meaningful decryptions. In this way we are able to decrypt attribute labels consisting of a number of unfamiliar few-letter abbreviations, such as UNP_PEN_INT, which we can decrypt to UNPAID_PENALTY_INTEREST. We evaluate our schema decryption approach on three real-world repositories of ETL workflows and show that our approach is able to suggest high-quality decryptions for cryptic attribute labels in a given schema. N2 - Extract-Transform-Load (ETL) Tools werden häufig beim Erstellen, der Wartung und der Weiterentwicklung von Data Warehouses, Data Marts und operationalen Datenbanken verwendet. ETL Workflows befüllen diese Systeme mit Daten aus vielen unterschiedlichen Quellsystemen. Ein ETL Workflow besteht aus mehreren Transformationsschritten, die einen DAG-strukturierter Graphen bilden. Mit der Zeit entstehen hunderte individueller ETL Workflows, da neue Datenquellen integriert oder neue Anforderungen umgesetzt werden müssen. Die Wartung und Weiterentwicklung von großen ETL Systemen benötigt viel Zeit und manuelle Arbeit. Ein zentrales Problem ist dabei das Verständnis unbekannter Attributnamen in Quell- und Zieldatenbanken und ETL Transformationen. Schwer verständliche Attributnamen führen zu Frustration und hohen Zeitaufwänden bei der Entwicklung und dem Verständnis von ETL Workflows. Wir präsentieren eine Schema Decryption Technik, die ETL Entwicklern das Verständnis kryptischer Schemata in Quell- und Zieldatenbanken und ETL Transformationen erleichtert. Unser Ansatz berücksichtigt für ein gegebenes ETL System die Vielzahl verknüpfter Attributnamen in den existierenden ETL Workflows. So werden gute und aussagekräftige "Decryptions" gefunden und wir sind in der Lage Attributnamen, die aus unbekannten Abkürzungen bestehen, zu "decrypten". So wird z.B. für den Attributenamen UNP_PEN_INT als Decryption UNPAIN_PENALTY_INTEREST vorgeschlagen. Unser Schema Decryption Ansatz wurde für drei ETL-Repositories evaluiert und es zeigte sich, dass unser Ansatz qualitativ hochwertige Decryptions für kryptische Attributnamen vorschlägt. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 60 KW - Extract-Transform-Load (ETL) KW - Data Warehouse KW - Datenintegration KW - Extract-Transform-Load (ETL) KW - Data Warehouse KW - Data Integration Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-61257 SN - 978-3-86956-201-8 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Alnemr, Rehab A1 - Polyvyanyy, Artem A1 - AbuJarour, Mohammed A1 - Appeltauer, Malte A1 - Hildebrandt, Dieter A1 - Thomas, Ivonne A1 - Overdick, Hagen A1 - Schöbel, Michael A1 - Uflacker, Matthias A1 - Kluth, Stephan A1 - Menzel, Michael A1 - Schmidt, Alexander A1 - Hagedorn, Benjamin A1 - Pascalau, Emilian A1 - Perscheid, Michael A1 - Vogel, Thomas A1 - Hentschel, Uwe A1 - Feinbube, Frank A1 - Kowark, Thomas A1 - Trümper, Jonas A1 - Vogel, Tobias A1 - Becker, Basil ED - Meinel, Christoph ED - Plattner, Hasso ED - Döllner, Jürgen Roland Friedrich ED - Weske, Mathias ED - Polze, Andreas ED - Hirschfeld, Robert ED - Naumann, Felix ED - Giese, Holger T1 - Proceedings of the 4th Ph.D. Retreat of the HPI Research School on Service-oriented Systems Engineering T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 31 KW - Hasso-Plattner-Institut KW - Forschungskolleg KW - Klausurtagung KW - Service-oriented Systems Engineering KW - Hasso Plattner Institute KW - Research School KW - Ph.D. Retreat KW - Service-oriented Systems Engineering Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-40838 SN - 978-3-86956-036-6 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Appeltauer, Malte A1 - Hirschfeld, Robert T1 - The JCop language specification : Version 1.0, April 2012 N2 - Program behavior that relies on contextual information, such as physical location or network accessibility, is common in today's applications, yet its representation is not sufficiently supported by programming languages. With context-oriented programming (COP), such context-dependent behavioral variations can be explicitly modularized and dynamically activated. In general, COP could be used to manage any context-specific behavior. However, its contemporary realizations limit the control of dynamic adaptation. This, in turn, limits the interaction of COP's adaptation mechanisms with widely used architectures, such as event-based, mobile, and distributed programming. The JCop programming language extends Java with language constructs for context-oriented programming and additionally provides a domain-specific aspect language for declarative control over runtime adaptations. As a result, these redesigned implementations are more concise and better modularized than their counterparts using plain COP. JCop's main features have been described in our previous publications. However, a complete language specification has not been presented so far. This report presents the entire JCop language including the syntax and semantics of its new language constructs. N2 - Das Verhalten von modernen Software-Anwendungen benötigt häufig Informationen über den Kontext ihrer Ausführung, z.B. die geografische Position, die Tageszeit oder die aktuelle Netzwerkbandbreite. Dennoch bieten heutige Programmiersprachen nur wenig Unterstützung für die Repräsentation kontextspezifischen Verhaltens. Kontextorientiertes Programmieren ist ein Ansatz, der die explizite Modularisierung und Laufzeitaktivierung von kontextspezifischem Verhalten auf der Ebene von Programmiersprachkonstrukten ermöglicht. Die bisherigen Umsetzungen von kontextorientiertem Programmieren schränken jedoch die Kontrolle der Laufzeitaktivierungen solches kontextspezifischen Verhaltens ein. Daraus folgt eine Einschränkung der Anwendungsbereiche für kontextorientiertes Programmieren, unter anderem für solche Domänen, in denen Programme sehr häufig kontextabhängiges Verhalten bereitstellen, z.B. ereignisbasierte, mobile und dienstorientierte Systeme. Die Programmiersprache JCop erweitert Java um Sprachkonstrukte für kontextorientieres Programmieren und bietet zusätzlich eine domänenspezifische Aspektsprach an, mit deren Hilfe Laufzeitadaptionen deklarativ spezifiziert werden können. Die Kernkonzepte von JCop wurden bereits in mehrern Publikationen vorgestellt, dieser Bericht enthält nun eine umfassende Sprachspezifikation von JCop. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 59 KW - Programming Languages KW - Context-oriented Programming KW - Aspect-oriented Programming KW - Java KW - JCop KW - runtime adaptations Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-60208 SN - 978-3-86956-193-6 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Bauckmann, Jana A1 - Abedjan, Ziawasch A1 - Leser, Ulf A1 - Müller, Heiko A1 - Naumann, Felix T1 - Covering or complete? : Discovering conditional inclusion dependencies N2 - Data dependencies, or integrity constraints, are used to improve the quality of a database schema, to optimize queries, and to ensure consistency in a database. In the last years conditional dependencies have been introduced to analyze and improve data quality. In short, a conditional dependency is a dependency with a limited scope defined by conditions over one or more attributes. Only the matching part of the instance must adhere to the dependency. In this paper we focus on conditional inclusion dependencies (CINDs). We generalize the definition of CINDs, distinguishing covering and completeness conditions. We present a new use case for such CINDs showing their value for solving complex data quality tasks. Further, we define quality measures for conditions inspired by precision and recall. We propose efficient algorithms that identify covering and completeness conditions conforming to given quality thresholds. Our algorithms choose not only the condition values but also the condition attributes automatically. Finally, we show that our approach efficiently provides meaningful and helpful results for our use case. N2 - Datenabhängigkeiten (wie zum Beispiel Integritätsbedingungen), werden verwendet, um die Qualität eines Datenbankschemas zu erhöhen, um Anfragen zu optimieren und um Konsistenz in einer Datenbank sicherzustellen. In den letzten Jahren wurden bedingte Abhängigkeiten (conditional dependencies) vorgestellt, die die Qualität von Daten analysieren und verbessern sollen. Eine bedingte Abhängigkeit ist eine Abhängigkeit mit begrenztem Gültigkeitsbereich, der über Bedingungen auf einem oder mehreren Attributen definiert wird. In diesem Bericht betrachten wir bedingte Inklusionsabhängigkeiten (conditional inclusion dependencies; CINDs). Wir generalisieren die Definition von CINDs anhand der Unterscheidung von überdeckenden (covering) und vollständigen (completeness) Bedingungen. Wir stellen einen Anwendungsfall für solche CINDs vor, der den Nutzen von CINDs bei der Lösung komplexer Datenqualitätsprobleme aufzeigt. Darüber hinaus definieren wir Qualitätsmaße für Bedingungen basierend auf Sensitivität und Genauigkeit. Wir stellen effiziente Algorithmen vor, die überdeckende und vollständige Bedingungen innerhalb vorgegebener Schwellwerte finden. Unsere Algorithmen wählen nicht nur die Werte der Bedingungen, sondern finden auch die Bedingungsattribute automatisch. Abschließend zeigen wir, dass unser Ansatz effizient sinnvolle und hilfreiche Ergebnisse für den vorgestellten Anwendungsfall liefert. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 62 KW - Datenabhängigkeiten KW - Bedingte Inklusionsabhängigkeiten KW - Erkennen von Meta-Daten KW - Linked Open Data KW - Link-Entdeckung KW - Assoziationsregeln KW - Data Dependency KW - Conditional Inclusion Dependency KW - Metadata Discovery KW - Linked Open Data KW - Link Discovery KW - Association Rule Mining Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-62089 SN - 978-3-86956-212-4 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Bauckmann, Jana A1 - Leser, Ulf A1 - Naumann, Felix T1 - Efficient and exact computation of inclusion dependencies for data integration N2 - Data obtained from foreign data sources often come with only superficial structural information, such as relation names and attribute names. Other types of metadata that are important for effective integration and meaningful querying of such data sets are missing. In particular, relationships among attributes, such as foreign keys, are crucial metadata for understanding the structure of an unknown database. The discovery of such relationships is difficult, because in principle for each pair of attributes in the database each pair of data values must be compared. A precondition for a foreign key is an inclusion dependency (IND) between the key and the foreign key attributes. We present with Spider an algorithm that efficiently finds all INDs in a given relational database. It leverages the sorting facilities of DBMS but performs the actual comparisons outside of the database to save computation. Spider analyzes very large databases up to an order of magnitude faster than previous approaches. We also evaluate in detail the effectiveness of several heuristics to reduce the number of necessary comparisons. Furthermore, we generalize Spider to find composite INDs covering multiple attributes, and partial INDs, which are true INDs for all but a certain number of values. This last type is particularly relevant when integrating dirty data as is often the case in the life sciences domain - our driving motivation. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 34 KW - Metadatenentdeckung KW - Metadatenqualität KW - Schemaentdeckung KW - Datenanalyse KW - Datenintegration KW - metadata discovery KW - metadata quality KW - schema discovery KW - data profiling KW - data integration Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-41396 SN - 978-3-86956-048-9 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Becker, Basil A1 - Giese, Holger T1 - Cyber-physical systems with dynamic structure : towards modeling and verification of inductive invariants N2 - Cyber-physical systems achieve sophisticated system behavior exploring the tight interconnection of physical coupling present in classical engineering systems and information technology based coupling. A particular challenging case are systems where these cyber-physical systems are formed ad hoc according to the specific local topology, the available networking capabilities, and the goals and constraints of the subsystems captured by the information processing part. In this paper we present a formalism that permits to model the sketched class of cyber-physical systems. The ad hoc formation of tightly coupled subsystems of arbitrary size are specified using a UML-based graph transformation system approach. Differential equations are employed to define the resulting tightly coupled behavior. Together, both form hybrid graph transformation systems where the graph transformation rules define the discrete steps where the topology or modes may change, while the differential equations capture the continuous behavior in between such discrete changes. In addition, we demonstrate that automated analysis techniques known for timed graph transformation systems for inductive invariants can be extended to also cover the hybrid case for an expressive case of hybrid models where the formed tightly coupled subsystems are restricted to smaller local networks. N2 - Cyber-physical Systeme erzielen ihr ausgefeiltes Systemverhalten durch die enge Verschränkung von physikalischer Kopplung, wie sie in Systemen der klassichen Igenieurs-Disziplinen vorkommt, und der Kopplung durch Informationstechnologie. Eine besondere Herausforderung stellen in diesem Zusammenhang Systeme dar, die durch die spontane Vernetzung einzelner Cyber-Physical-Systeme entsprechend der lokalen, topologischen Gegebenheiten, verfügbarer Netzwerkfähigkeiten und der Anforderungen und Beschränkungen der Teilsysteme, die durch den informationsverabeitenden Teil vorgegeben sind, entstehen. In diesem Bericht stellen wir einen Formalismus vor, der die Modellierung der eingangs skizzierten Systeme erlaubt. Ein auf UML aufbauender Graph-Transformations-Ansatz wird genutzt, um die spontane Bildung eng kooperierender Teilsysteme beliebiger Größe zu spezifizieren. Differentialgleichungen beschreiben das kombinierte Verhalten auf physikalischer Ebene. In Kombination ergeben diese beiden Formalismen hybride Graph-Transformations-Systeme, in denen die Graph-Transformationen diskrete Schritte und die Differentialgleichungen das kontinuierliche, physikalische Verhalten des Systems beschreiben. Zusätzlich, präsentieren wir die Erweiterung einer automatischen Analysetechnik zur Verifikation induktiver Invarianten, die bereits für zeitbehaftete Systeme bekannt ist, auf den ausdrucksstärkeren Fall der hybriden Modelle. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 64 KW - Cyber-Physical-Systeme KW - Verifikation KW - Modellierung KW - hybride Graph-Transformations-Systeme KW - Cyber-physical-systems KW - verification KW - modeling KW - hybrid graph-transformation-systems Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-62437 SN - 978-3-86956-217-9 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Becker, Basil A1 - Giese, Holger A1 - Neumann, Stefan T1 - Correct dynamic service-oriented architectures : modeling and compositional verification with dynamic collaborations N2 - Service-oriented modeling employs collaborations to capture the coordination of multiple roles in form of service contracts. In case of dynamic collaborations the roles may join and leave the collaboration at runtime and therefore complex structural dynamics can result, which makes it very hard to ensure their correct and safe operation. We present in this paper our approach for modeling and verifying such dynamic collaborations. Modeling is supported using a well-defined subset of UML class diagrams, behavioral rules for the structural dynamics, and UML state machines for the role behavior. To be also able to verify the resulting service-oriented systems, we extended our former results for the automated verification of systems with structural dynamics [7, 8] and developed a compositional reasoning scheme, which enables the reuse of verification results. We outline our approach using the example of autonomous vehicles that use such dynamic collaborations via ad-hoc networking to coordinate and optimize their joint behavior. N2 - Bei der Modellierung Service-orientierter Systeme werden Kollaborationen verwendet, um die Koordination mehrerer Rollen durch Service-Verträge zu beschreiben. Dynamische Kollaborationen erlauben ein Hinzufügen und Entfernen von Rollen zur Kollaboration zur Laufzeit, wodurch eine komplexe strukturelle Dynamik entstehen kann. Die automatische Analyse service-orientierter Systeme wird durch diese erheblich erschwert. In dieser Arbeit stellen wir einen Ansatz zur Modellierung und Verifikation solcher dynamischer Kollaborationen vor. Eine spezielle Untermenge der UML ermöglicht die Modellierung, wobei Klassendiagramme, Verhaltensregeln für die strukturelle Dynamik und UML Zustandsdiagramme für das Verhalten der Rollen verwendet werden. Um die Verifikation der so modellierten service-orientierten Systeme zu ermöglichen, erweiterten wir unsere früheren Ergebnisse zur Verifikation von Systemen mit struktureller Dynamik [7,8] und entwickelten einen kompositionalen Verifikationsansatz. Der entwickelte Verifikationsansatz erlaubt es Ergebnisse wiederzuverwenden. Die entwickelten Techniken werden anhand autonomer Fahrzeuge, die dynamische Kollaborationen über ad-hoc Netzwerke zur Koordination und Optimierung ihres gemeinsamen Verhaltens nutzen, exemplarisch vorgestellt. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 29 Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-30473 SN - 978-3-940793-91-1 ER - TY - BOOK A1 - Beyhl, Thomas A1 - Blouin, Dominique A1 - Giese, Holger A1 - Lambers, Leen T1 - On the operationalization of graph queries with generalized discrimination networks N2 - Graph queries have lately gained increased interest due to application areas such as social networks, biological networks, or model queries. For the relational database case the relational algebra and generalized discrimination networks have been studied to find appropriate decompositions into subqueries and ordering of these subqueries for query evaluation or incremental updates of query results. For graph database queries however there is no formal underpinning yet that allows us to find such suitable operationalizations. Consequently, we suggest a simple operational concept for the decomposition of arbitrary complex queries into simpler subqueries and the ordering of these subqueries in form of generalized discrimination networks for graph queries inspired by the relational case. The approach employs graph transformation rules for the nodes of the network and thus we can employ the underlying theory. We further show that the proposed generalized discrimination networks have the same expressive power as nested graph conditions. N2 - Graph-basierte Suchanfragen erfahren in jüngster Zeit ein zunehmendes Interesse durch Anwendungsdomänen wie zum Beispiel Soziale Netzwerke, biologische Netzwerke und Softwaremodelle. Für relationale Datenbanken wurden die relationale Algebra und sogenannte generalisierte Discrimination Networks bereits studiert um Suchanfragen angemessen in kleinere Suchanfragen für die inkrementelle Auswertung zu zerlegen und zu ordnen. Allerdings gibt es für Graphdatenbanken derzeit keine formale Grundlage, die es erlaubt solche Zerlegungen zu finden. Daher schlagen wir ein Konzept für die Zerlegung und Ordnung von komplexen Suchanfragen vor. Das Konzept basiert auf generalisierten Discrimination Networks, die aus relationalen Datenbanken bekannt sind. Der Ansatz verwendet Graphtransformationsregeln für Knoten in diesen Netzwerken, sodass die Theorie von Graphen und Graphtransformationen angewendet werden kann. Darüber hinaus zeigen wir auf, dass diese Discrimination Networks die gleiche Ausdrucksstärke besitzen wie Nested Graph Conditions. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 106 KW - graph queries KW - discrimination networks KW - incremental graph pattern matching KW - nested graph conditions KW - Graph-basierte Suche KW - Discrimination Networks KW - Inkrementelle Graphmustersuche KW - Nested Graph Conditions Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-96279 SN - 978-3-86956-372-5 SN - 1613-5652 SN - 2191-1665 IS - 106 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Beyhl, Thomas A1 - Giese, Holger T1 - Efficient and scalable graph view maintenance for deductive graph databases based on generalized discrimination networks N2 - Graph databases provide a natural way of storing and querying graph data. In contrast to relational databases, queries over graph databases enable to refer directly to the graph structure of such graph data. For example, graph pattern matching can be employed to formulate queries over graph data. However, as for relational databases running complex queries can be very time-consuming and ruin the interactivity with the database. One possible approach to deal with this performance issue is to employ database views that consist of pre-computed answers to common and often stated queries. But to ensure that database views yield consistent query results in comparison with the data from which they are derived, these database views must be updated before queries make use of these database views. Such a maintenance of database views must be performed efficiently, otherwise the effort to create and maintain views may not pay off in comparison to processing the queries directly on the data from which the database views are derived. At the time of writing, graph databases do not support database views and are limited to graph indexes that index nodes and edges of the graph data for fast query evaluation, but do not enable to maintain pre-computed answers of complex queries over graph data. Moreover, the maintenance of database views in graph databases becomes even more challenging when negation and recursion have to be supported as in deductive relational databases. In this technical report, we present an approach for the efficient and scalable incremental graph view maintenance for deductive graph databases. The main concept of our approach is a generalized discrimination network that enables to model nested graph conditions including negative application conditions and recursion, which specify the content of graph views derived from graph data stored by graph databases. The discrimination network enables to automatically derive generic maintenance rules using graph transformations for maintaining graph views in case the graph data from which the graph views are derived change. We evaluate our approach in terms of a case study using multiple data sets derived from open source projects. N2 - Graphdatenbanken bieten natürliche Möglichkeiten Graphdaten zu speichern und abzufragen. Im Gegensatz zu relationalen Datenbanken ermöglichen Graphdatenbanken Anfragen, die direkt auf der Graphstruktur der Daten arbeiten. Zum Beispiel können Graphmuster zur Formulierung von Anfragen an die Graphdatenbanken verwendet werden. Allerdings können wie für relationale Datenbanken komplexe Anfragen sehr zeitaufwendig sein und interaktive Anfrageszenarien mit der Datenbank verhindern. Ein möglicher Ansatz mit diesem Geschwindigkeitsproblem umzugehen, ist das Vorberechnen von Antworten für komplexe und häufig gestellt Suchanfragen in Form von sogenannten Datenbanksichten. Dabei muss sichergestellt sein, dass Anfragen, die mit Hilfe von Datenbanksichten beantwortet werden, zu jeder Zeit die gleichen Suchergebnisse zurückliefern als wenn sie ohne Datenbanksichten beantwortet werden, sodass Datenbanksichten gewartet werden müssen bevor Suchanfragen mit Hilfe dieser Datenbanksichten beantwortet werden. Eine solche Wartung von Datenbanksichten muss effizient erfolgen, anderenfalls kann sich der Aufwand für die Erzeugung und Wartung der Datenbanksichten nicht auszahlen. Zum Zeitpunkt der Anfertigung dieses technischen Berichts, ist keine Graphdatenbank bekannt, die solche Datenbanksichten unterstützt. Lediglich Indizes werden durch Graphdatenbanken unterstützt, die es ermöglichen Knoten und Kanten eines Graphen für die schnelle Anfragenbeantwortung zu indizieren, aber ermöglichen es nicht vorberechnete Antworten auf Suchanfragen zu warten. Die Unterstützung von Datenbanksichten durch Graphdatenbanken wird zusätzlich erschwert wenn Negation und Rekursion unterstützt werden sollen wie bei relationalen deduktiven Datenbanken. In diesen technischen Bericht beschreiben wir einen effizienten und skalierenden Ansatz zur inkrementellen Wartung von Dankenbanksichten für deduktive Graphdatenbanken. Das Hauptkonzept des Ansatzes ist ein sogenanntes verallgemeinertes Discrimination Network, dass es ermöglicht geschachtelte Graph Conditions inklusive Negation und Rekursion zu modellieren, die es ermöglichen den Inhalt von Datenbanksichten für Graphdatenbanken in Form von Graphmustern zu spezifizieren. Das Discrimination Network erlaubt die Ableitung von Regeln für die Wartung der Datenbanksichten wenn die Graphdaten von denen die Datenbanksichten abgeleitet wurden modifiziert werden. Wir evaluieren den Ansatz in Form einer Fallstudie und mehreren Graphdatensätzen, die aus Open Source Projekten abgeleitet wurden. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 99 KW - incremental graph pattern matching KW - graph databases KW - view maintenance KW - inkrementelles Graph Pattern Matching KW - Graphdatenbanken KW - Wartung von Graphdatenbanksichten Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-79535 SN - 978-3-86956-339-8 SN - 1613-5652 SN - 2191-1665 IS - 99 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Breest, Martin A1 - Bouché, Paul A1 - Grund, Martin A1 - Haubrock, Sören A1 - Hüttenrauch, Stefan A1 - Kylau, Uwe A1 - Ploskonos, Anna A1 - Queck, Tobias A1 - Schreiter, Torben T1 - Fundamentals of Service-Oriented Engineering N2 - Since 2002, keywords like service-oriented engineering, service-oriented computing, and service-oriented architecture have been widely used in research, education, and enterprises. These and related terms are often misunderstood or used incorrectly. To correct these misunderstandings, a deeper knowledge of the concepts, the historical backgrounds, and an overview of service-oriented architectures is demanded and given in this paper. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 16 Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-33801 SN - 978-3-939469-35-3 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Calmez, Conrad A1 - Hesse, Hubert A1 - Siegmund, Benjamin A1 - Stamm, Sebastian A1 - Thomschke, Astrid A1 - Hirschfeld, Robert A1 - Ingalls, Dan A1 - Lincke, Jens T1 - Explorative authoring of Active Web content in a mobile environment N2 - Developing rich Web applications can be a complex job - especially when it comes to mobile device support. Web-based environments such as Lively Webwerkstatt can help developers implement such applications by making the development process more direct and interactive. Further the process of developing software is collaborative which creates the need that the development environment offers collaboration facilities. This report describes extensions of the webbased development environment Lively Webwerkstatt such that it can be used in a mobile environment. The extensions are collaboration mechanisms, user interface adaptations but as well event processing and performance measuring on mobile devices. N2 - Vielseitige Webanwendungen zu entwickeln kann eine komplexe Aufgabe sein - besonders wenn es die Unterstützung mobiler Geräte betrifft. Webbasierte Umgebungen wie Lively Kernel können Entwicklern helfen Webanwendungen zu entwickeln, indem sie den Entwicklungsprozess direkter und interaktiver gestalten. Zudem sind Entwicklungsprozesse von Software kollaborativ, d.h. Enwicklungsumgebungen müssen so gestaltet sein, dass sie mit kollaborativen Elementen zu unterstützen. Diese Arbeit beschreibt die Erweiterungen der webbasierten Entwicklungsumgebung Lively Webwerkstatt, so dass diese in einer mobilen Umgebung genutzt werden kann. Die Reichweite dieser Erweiterungen erstreckt sich von Kollaborationsmechanismen und Benutzerschnittstellen bis hin zu Eventbehandlung und Performanzmessungen auf mobilen Geräten. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 72 KW - Web applications KW - Mobile Application Development KW - CSCW KW - Lively Kernel Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-64054 SN - 978-3-86956-232-2 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Draisbach, Uwe A1 - Naumann, Felix A1 - Szott, Sascha A1 - Wonneberg, Oliver T1 - Adaptive windows for duplicate detection N2 - Duplicate detection is the task of identifying all groups of records within a data set that represent the same real-world entity, respectively. This task is difficult, because (i) representations might differ slightly, so some similarity measure must be defined to compare pairs of records and (ii) data sets might have a high volume making a pair-wise comparison of all records infeasible. To tackle the second problem, many algorithms have been suggested that partition the data set and compare all record pairs only within each partition. One well-known such approach is the Sorted Neighborhood Method (SNM), which sorts the data according to some key and then advances a window over the data comparing only records that appear within the same window. We propose several variations of SNM that have in common a varying window size and advancement. The general intuition of such adaptive windows is that there might be regions of high similarity suggesting a larger window size and regions of lower similarity suggesting a smaller window size. We propose and thoroughly evaluate several adaption strategies, some of which are provably better than the original SNM in terms of efficiency (same results with fewer comparisons). N2 - Duplikaterkennung beschreibt das Auffinden von mehreren Datensätzen, die das gleiche Realwelt-Objekt repräsentieren. Diese Aufgabe ist nicht trivial, da sich (i) die Datensätze geringfügig unterscheiden können, so dass Ähnlichkeitsmaße für einen paarweisen Vergleich benötigt werden, und (ii) aufgrund der Datenmenge ein vollständiger, paarweiser Vergleich nicht möglich ist. Zur Lösung des zweiten Problems existieren verschiedene Algorithmen, die die Datenmenge partitionieren und nur noch innerhalb der Partitionen Vergleiche durchführen. Einer dieser Algorithmen ist die Sorted-Neighborhood-Methode (SNM), welche Daten anhand eines Schlüssels sortiert und dann ein Fenster über die sortierten Daten schiebt. Vergleiche werden nur innerhalb dieses Fensters durchgeführt. Wir beschreiben verschiedene Variationen der Sorted-Neighborhood-Methode, die auf variierenden Fenstergrößen basieren. Diese Ansätze basieren auf der Intuition, dass Bereiche mit größerer und geringerer Ähnlichkeiten innerhalb der sortierten Datensätze existieren, für die entsprechend größere bzw. kleinere Fenstergrößen sinnvoll sind. Wir beschreiben und evaluieren verschiedene Adaptierungs-Strategien, von denen nachweislich einige bezüglich Effizienz besser sind als die originale Sorted-Neighborhood-Methode (gleiches Ergebnis bei weniger Vergleichen). T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 49 KW - Informationssysteme KW - Datenqualität KW - Datenintegration KW - Duplikaterkennung KW - Duplicate Detection KW - Data Quality KW - Data Integration KW - Information Systems Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-53007 SN - 978-3-86956-143-1 SN - 1613-5652 SN - 2191-1665 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Dyck, Johannes A1 - Giese, Holger T1 - k-Inductive invariant checking for graph transformation systems N2 - While offering significant expressive power, graph transformation systems often come with rather limited capabilities for automated analysis, particularly if systems with many possible initial graphs and large or infinite state spaces are concerned. One approach that tries to overcome these limitations is inductive invariant checking. However, the verification of inductive invariants often requires extensive knowledge about the system in question and faces the approach-inherent challenges of locality and lack of context. To address that, this report discusses k-inductive invariant checking for graph transformation systems as a generalization of inductive invariants. The additional context acquired by taking multiple (k) steps into account is the key difference to inductive invariant checking and is often enough to establish the desired invariants without requiring the iterative development of additional properties. To analyze possibly infinite systems in a finite fashion, we introduce a symbolic encoding for transformation traces using a restricted form of nested application conditions. As its central contribution, this report then presents a formal approach and algorithm to verify graph constraints as k-inductive invariants. We prove the approach's correctness and demonstrate its applicability by means of several examples evaluated with a prototypical implementation of our algorithm. N2 - Während Graphtransformationssysteme einerseits einen ausdrucksstarken Formalismus bereitstellen, existieren andererseits nur eingeschränkte Möglichkeiten für die automatische Analyse. Dies gilt insbesondere für die Analyse von Systemen mit einer Vielzahl an initialen Graphen oder mit großen oder unendlichen Zustandsräumen. Ein möglicher Ansatz, um diese Einschränkungen zu umgehen, sind induktive Invarianten. Allerdings erfordert die Verifkation induktiver Invarianten oft erweitertes Wissen über das zu verifizierende System; weiterhin muss diese Verifikationstechnik mit den spezifischen Problemen der Lokalität und des Mangels an Kontextwissen umgehen. Dieser Bericht betrachtet k-induktive Invarianten - eine Verallgemeinerung induktiver Invarienten - für Graphtransformationssysteme als einen möglichen Ansatz, um diese Probleme anzugehen. Zusätzliches Kontextwissen, das durch die Analyse mehrerer (k) Schritte gewonnen werden kann, macht den entscheidenden Unterschied zu induktiven Invarianten aus und genügt oft, um die gewünschten Invarianten ohne die iterative Entwicklung zusätzlicher Eigenschaften zu verifizieren. Um unendliche Systeme in endlicher Zeit zu analysieren, führen wir eine symbolische Kodierung von Transformationssequenzen ein, die auf verschachtelten Anwendungsbedingungen basiert. Unser zentraler Beitrag ist dann ein formaler Ansatz und Algorithmus zur Verifikation von Graphbedingungen als k-induktive Invarianten. Wir führen einen formalen Beweis, um die Korrektheit unseres Verfahrens nachzuweisen, und demonstrieren die Anwendbarkeit des Verfahrens an mehreren Beispielen, die mit einer prototypischen Implementierung verifiziert wurden. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 119 KW - formal verification KW - static analysis KW - graph transformation KW - typed graph transformation systems KW - graph constraints KW - nested application conditions KW - k-inductive invariants KW - k-induction KW - k-inductive invariant checking KW - transformation sequences KW - s/t-pattern sequences KW - formale Verifikation KW - statische Analyse KW - Graphtransformationen KW - Graphtransformationssysteme KW - Graphbedingungen KW - verschachtelte Anwednungsbedingungen KW - k-induktive Invarianten KW - k-Induktion KW - k-induktives Invariant-Checking KW - Transformationssequenzen KW - Sequenzen von s/t-Pattern Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-397044 SN - 978-3-86956-406-7 SN - 1613-5652 SN - 2191-1665 IS - 119 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Dyck, Johannes A1 - Giese, Holger T1 - Inductive invariant checking with partial negative application conditions N2 - Graph transformation systems are a powerful formal model to capture model transformations or systems with infinite state space, among others. However, this expressive power comes at the cost of rather limited automated analysis capabilities. The general case of unbounded many initial graphs or infinite state spaces is only supported by approaches with rather limited scalability or expressiveness. In this report we improve an existing approach for the automated verification of inductive invariants for graph transformation systems. By employing partial negative application conditions to represent and check many alternative conditions in a more compact manner, we can check examples with rules and constraints of substantially higher complexity. We also substantially extend the expressive power by supporting more complex negative application conditions and provide higher accuracy by employing advanced implication checks. The improvements are evaluated and compared with another applicable tool by considering three case studies. N2 - Graphtransformationssysteme stellen ein ausdrucksstarkes formales Modell zur Verfügung, um Modelltransformationen und Systeme mit unendlichem Zustandsraum zu beschreiben. Allerdings sorgt diese Ausdrucksstärke für signifikante Einschränkungen bei der automatischen Analyse. Ansätze, die die Analyse allgemeiner Systeme mit unendlichem Zustandsraum oder beliebig vielen initialen Graphen unterstützen, sind in ihrer Skalierbarkeit oder Ausdrucksstärke stark eingeschränkt. In diesem Bericht beschreiben wir Verbesserungen eines existierenden Ansatzes für die automatische Verifikation induktiver Invarianten in Graphtransformationssystemen. Durch die Verwendung partieller negativer Anwendungsbedingungen für die Repräsentation und Überprüfung einer Vielzahl an Bedingungen in kompakterer Form können Regeln und Bedingungen von deutlich höhrerer Komplexität verifiziert werden. Weiterhin wird die Ausdrucksstärke des Ansatzes beträchtlich erhöht, indem die Verwendung komplexerer negativer Anwendungsbedingungen und erweiterter Implikationstests ermöglicht wird. Alle diese Verbesserungen werden evaluiert und mit einem anderen anwendbaren Werkzeug anhand von drei Fallstudien verglichen. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 98 KW - verification KW - inductive invariant checking KW - graph transformation KW - partial application conditions KW - Verifikation KW - induktives Invariant Checking KW - Graphtransformationen KW - partielle Anwendungsbedingungen Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-77748 SN - 978-3-86956-333-6 SN - 1613-5652 SN - 2191-1665 IS - 98 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Dyck, Johannes A1 - Giese, Holger A1 - Lambers, Leen T1 - Automatic verification of behavior preservation at the transformation level for relational model transformation N2 - The correctness of model transformations is a crucial element for model-driven engineering of high quality software. In particular, behavior preservation is the most important correctness property avoiding the introduction of semantic errors during the model-driven engineering process. Behavior preservation verification techniques either show that specific properties are preserved, or more generally and complex, they show some kind of behavioral equivalence or refinement between source and target model of the transformation. Both kinds of behavior preservation verification goals have been presented with automatic tool support for the instance level, i.e. for a given source and target model specified by the model transformation. However, up until now there is no automatic verification approach available at the transformation level, i.e. for all source and target models specified by the model transformation. In this report, we extend our results presented in [27] and outline a new sophisticated approach for the automatic verification of behavior preservation captured by bisimulation resp. simulation for model transformations specified by triple graph grammars and semantic definitions given by graph transformation rules. In particular, we show that the behavior preservation problem can be reduced to invariant checking for graph transformation and that the resulting checking problem can be addressed by our own invariant checker even for a complex example where a sequence chart is transformed into communicating automata. We further discuss today's limitations of invariant checking for graph transformation and motivate further lines of future work in this direction. N2 - Die Korrektheit von Modelltransformationen ist von zentraler Wichtigkeit bei der Anwendung modellgetriebener Softwareentwicklung für die Entwicklung hochqualitativer Software. Insbesondere verhindert Verhaltensbewahrung als wichtigste Korrektheitseigenschaft die Entstehung semantischer Fehler während des modellgetriebenen Entwicklungsprozesses. Techniken zur Verifikation von Verhaltensbewahrung zeigen, dass bestimmte spezifische Eigenschaften bewahrt bleiben oder, im allgemeineren und komplexeren Fall, dass eine Form von Verhaltensäquivalenz oder Verhaltensverfeinerung zwischen Quell- und Zielmodell der Transformation besteht. Für beide Ansätze existieren automatisierte Werkzeuge für die Verifikation auf der Instanzebene, also zur Überprüfung konkreter Paare aus Quell- und Zielmodellen der Transformation. Allerdings existiert kein automatischer Verifikationsansatz, der auf der Transformationsebene arbeitet, also Aussagen zu allen Quell- und Zielmodellen einer Modelltransformation treffen kann. Dieser Bericht erweitert unsere Vorarbeit und Ergebnisse aus [27] und stellt einen neuen Ansatz zur automatischen Verifikation von Verhaltensbewahrung vor, der auf Bisimulation bzw. Simulation basiert. Dabei werden Modelltransformationen durch Triple-Graph-Grammatiken und Verhaltensdefinitionen mittels Graphtransformationsregeln beschrieben. Insbesondere weisen wir nach, dass das Problem der Verhaltensbewahrung durch Bisimulation auf Invariant-Checking für Graphtransformationssysteme reduziert werden kann und dass das entstehende Invariant-Checking-Problem für ein komplexes Beispiel durch unser Werkzeug zur Verifikation induktiver Invarianten gelöst werden kann. Das Beispiel beschreibt die Transformation von Sequenzdiagrammen in Systeme kommunizierender Automaten. Darüber hinaus diskutieren wir bestehende Einschränkungen von Invariant-Checking für Graphtransformationssysteme und Ansätze für zukünftige Arbeiten in diesem Bereich. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 112 KW - model transformation KW - behavior preservation KW - semantics preservation KW - relational model transformation KW - bisimulation KW - simulation KW - invariant checking KW - transformation level KW - behavioral equivalenc KW - behavioral refinement KW - behavioral abstraction KW - graph transformation systems KW - graph constraints KW - triple graph grammars KW - Modelltransformationen KW - Verhaltensbewahrung KW - relationale Modelltransformationen KW - Bisimulation KW - Simulation KW - Invariant-Checking KW - Transformationsebene KW - Verhaltensäquivalenz KW - Verhaltensverfeinerung KW - Verhaltensabstraktion KW - Graphtransformationssysteme KW - Graph-Constraints KW - Triple-Graph-Grammatiken Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-100279 SN - 978-3-86956-391-6 SN - 1613-5652 SN - 2191-1665 IS - 112 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Döllner, Jürgen Roland Friedrich A1 - Kirsch, Florian A1 - Nienhaus, Marc T1 - Visualizing Design and Spatial Assembly of Interactive CSG N2 - For interactive construction of CSG models understanding the layout of a model is essential for its efficient manipulation. To understand position and orientation of aggregated components of a CSG model, we need to realize its visible and occluded parts as a whole. Hence, transparency and enhanced outlines are key techniques to assist comprehension. We present a novel real-time rendering technique for visualizing design and spatial assembly of CSG models. As enabling technology we combine an image-space CSG rendering algorithm with blueprint rendering. Blueprint rendering applies depth peeling for extracting layers of ordered depth from polygonal models and then composes them in sorted order facilitating a clear insight of the models. We develop a solution for implementing depth peeling for CSG models considering their depth complexity. Capturing surface colors of each layer and later combining the results allows for generating order-independent transparency as one major rendering technique for CSG models. We further define visually important edges for CSG models and integrate an image-space edgeenhancement technique for detecting them in each layer. In this way, we extract visually important edges that are directly and not directly visible to outline a model’s layout. Combining edges with transparency rendering, finally, generates edge-enhanced depictions of image-based CSG models and allows us to realize their complex, spatial assembly. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 07 Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-33771 SN - 978-3-937786-56-2 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Eid-Sabbagh, Rami-Habib A1 - Hewelt, Marcin A1 - Weske, Mathias T1 - Business process architectures with multiplicities : transformation and correctness N2 - Business processes are instrumental to manage work in organisations. To study the interdependencies between business processes, Business Process Architectures have been introduced. These express trigger and message ow relations between business processes. When we investigate real world Business Process Architectures, we find complex interdependencies, involving multiple process instances. These aspects have not been studied in detail so far, especially concerning correctness properties. In this paper, we propose a modular transformation of BPAs to open nets for the analysis of behavior involving multiple business processes with multiplicities. For this purpose we introduce intermediary nets to portray semantics of multiplicity specifications. We evaluate our approach on a use case from the public sector. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 77 Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-66780 SN - 978-3-86956-257-5 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Felgentreff, Tim A1 - Borning, Alan A1 - Hirschfeld, Robert T1 - Babelsberg : specifying and solving constraints on object behavior N2 - Constraints allow developers to specify desired properties of systems in a number of domains, and have those properties be maintained automatically. This results in compact, declarative code, avoiding scattered code to check and imperatively re-satisfy invariants. Despite these advantages, constraint programming is not yet widespread, with standard imperative programming still the norm. There is a long history of research on integrating constraint programming with the imperative paradigm. However, this integration typically does not unify the constructs for encapsulation and abstraction from both paradigms. This impedes re-use of modules, as client code written in one paradigm can only use modules written to support that paradigm. Modules require redundant definitions if they are to be used in both paradigms. We present a language – Babelsberg – that unifies the constructs for en- capsulation and abstraction by using only object-oriented method definitions for both declarative and imperative code. Our prototype – Babelsberg/R – is an extension to Ruby, and continues to support Ruby’s object-oriented se- mantics. It allows programmers to add constraints to existing Ruby programs in incremental steps by placing them on the results of normal object-oriented message sends. It is implemented by modifying a state-of-the-art Ruby virtual machine. The performance of standard object-oriented code without con- straints is only modestly impacted, with typically less than 10% overhead compared with the unmodified virtual machine. Furthermore, our architec- ture for adding multiple constraint solvers allows Babelsberg to deal with constraints in a variety of domains. We argue that our approach provides a useful step toward making con- straint solving a generic tool for object-oriented programmers. We also provide example applications, written in our Ruby-based implementation, which use constraints in a variety of application domains, including interactive graphics, circuit simulations, data streaming with both hard and soft constraints on performance, and configuration file Management. N2 - Constraints – Beschränkungen und Abhängigkeiten zwischen Systemteilen – erlauben es Entwicklern, erwünschte Eigenschaften von Systemen zu spezifizieren, sodass diese automatisch sichergestellt werden. Das führt zu kompaktem, deklarativem Quelltext, und vermeidet verstreute Anweisungen, die wiederholt Invarianten prüfen und wiederherstellen müssen. Trotz dieser Vorteile ist Programmieren mit Constraints nicht verbreitet, sondern imperatives Programmieren die Norm. Es gibt eine lange Forschungsgeschichte zur Integration von Constraints mit imperativem Programmieren. Jedoch vereinheitlicht diese Integration nicht die Programmierkonstrukte zur Abstraktion und Kapselung beider Paradigmen. Das verhindert die Wiederverwendung von Modulen, da Quelltext, der in einem Paradigma geschrieben wurde, nur Module verwenden kann, die so geschrieben sind, dass sie dieses Paradigma unterstützen. Module benötigen daher redundante Definitionen, wenn sie in beiden Paradigmen zur Verfügung stehen sollen. Wir präsentieren hier eine Sprache – Babelsberg – welche die Konstrukte zur Abstraktion und Kapselung vereinheitlicht, indem sie bekannte objektorientierte Methodendefinitionen sowohl für deklarativen, als auch für imperativen Code verwendet. Unser Prototyp –Babelsberg/R – ist eine Erweiterung von Ruby, und unterstützt Rubys objektorientierte Semantik. Dieser erlaubt es Programmieren, Constraints schrittweise zu existierenden Ruby Programmen hinzuzufügen, indem diese auf den Ergebnissen von Methodenaufrufen deklariert werden. Der Prototyp ist auf Basis einer virtuellen Maschine für Ruby implementiert, wobei die Ausführungsgeschwindigkeit von objektorienterten Programmteilen ohne Constraints nur minimal – typischerweise weniger als 10% – beeinträchtigt wird. Weiterhin erlaubt es unsere Architektur, je nach Anwendungsfall, mehrere Lösungsalgorithmen für Constraints zu verwenden. Wir argumentieren, dass unser Ansatz einen nützlichen Schritt darstellt, um Programmieren mit Constraints zu einem allgemeinen Werkzeug für objektorientierte Programmierer zu machen. Wir zeigen Beispielanwendungen, die unserer Ruby-basierten Implementierung geschrieben sind, welche Constraints in einer Reihe von Anwendungen verwenden: Für interaktive Grafik, Schaltkreissimulation, Datenströme mit sowohl harten, als auch weichen Constraints bezüglich ihrer Geschwindigkeit, und Konfigurationsverwaltung. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 81 KW - Constraints KW - Beschränkungen und Abhängigkeiten KW - Objekt-orientiertes Programmieren mit Constraints KW - Constraints KW - Object Constraint Programming Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-67296 SN - 978-3-86956-265-0 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Felgentreff, Tim A1 - Hirschfeld, Robert A1 - Millstein, Todd A1 - Borning, Alan T1 - Babelsberg/RML BT - executable semantics and language testing with RML N2 - New programming language designs are often evaluated on concrete implementations. However, in order to draw conclusions about the language design from the evaluation of concrete programming languages, these implementations need to be verified against the formalism of the design. To that end, we also have to ensure that the design actually meets its stated goals. A useful tool for the latter has been to create an executable semantics from a formalism that can execute a test suite of examples. However, this mechanism so far did not allow to verify an implementation against the design. Babelsberg is a new design for a family of object-constraint languages. Recently, we have developed a formal semantics to clarify some issues in the design of those languages. Supplementing this work, we report here on how this formalism is turned into an executable operational semantics using the RML system. Furthermore, we show how we extended the executable semantics to create a framework that can generate test suites for the concrete Babelsberg implementations that provide traceability from the design to the language. Finally, we discuss how these test suites helped us find and correct mistakes in the Babelsberg implementation for JavaScript. N2 - Neue Programmiersprachdesigns werden typischerweise anhand konkreter Implementierungen bewertet. Um jedoch Schlüsse aus den Erfahrungen mit einer konkreten Programmiersprache auf ein Sprachdesign ziehen zu können, muss die konkrete Sprache verifizierbar dem Design entsprechen. Zudem muss sichergestellt sein, dass das formale Design seine gesetzten Ziele auch erfüllt. Dabei haben sich ausführbare Semantiken als ein nützliches Werkzeug erwiesen, um letzteres sicherzustellen. Allerdings half dieses Werkzeug bisher nicht, auch die konkrete Implementierung gegen das Design zu verifizieren. Babelsberg ist ein neues Design für eine Familie von Objekt-Constraint Programmiersprachen, zu der wir eine formale Semantik entwickelt haben, die einige Details des Designs klarstellt. Ergänzend dazu berichten wir hier, wie dieser Formalismus in eine ausführbare Semantik mithilfe des RML Systems umgewandelt werden kann. Weiterhin zeigen wir, wie wir diese ausführbare Semantik um ein Rahmenwerk erweitert haben, mit dem sich programmatische Tests für die konkreten Babelsberg Implementierungen erzeugen lassen, welche Rückverfolgbarkeit von der Sprachimplementierung zum Sprachdesign sicherstellen. Schlussendlich diskutieren wir, wie diese Tests uns erlaubten, Fehler in der Babelsberg Implementierung für JavaScript zu finden und zu beheben. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 103 KW - object-constraint programming KW - executable semantics KW - language specification KW - Objekt-Constraint Programmierung KW - ausführbare Semantiken KW - Sprachspezifikation Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-83826 SN - 978-3-86956-348-0 SN - 1613-5652 SN - 2191-1665 IS - 103 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Geller, Felix A1 - Hirschfeld, Robert A1 - Bracha, Gilad T1 - Pattern Matching for an object-oriented and dynamically typed programming language N2 - Pattern matching is a well-established concept in the functional programming community. It provides the means for concisely identifying and destructuring values of interest. This enables a clean separation of data structures and respective functionality, as well as dispatching functionality based on more than a single value. Unfortunately, expressive pattern matching facilities are seldomly incorporated in present object-oriented programming languages. We present a seamless integration of pattern matching facilities in an object-oriented and dynamically typed programming language: Newspeak. We describe language extensions to improve the practicability and integrate our additions with the existing programming environment for Newspeak. This report is based on the first author’s master’s thesis. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 36 KW - Pattern Matching KW - Musterabgleich KW - Muster KW - Objekt-Orientiertes Programmieren KW - Dynamische Typ Systeme KW - Pattern Matching KW - Patterns KW - Object-Oriented Programming KW - Dynamic Type System Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-43035 SN - 978-3-86956-065-6 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Giese, Holger A1 - Becker, Basil T1 - Modeling and verifying dynamic evolving service-oriented architectures N2 - The service-oriented architecture supports the dynamic assembly and runtime reconfiguration of complex open IT landscapes by means of runtime binding of service contracts, launching of new components and termination of outdated ones. Furthermore, the evolution of these IT landscapes is not restricted to exchanging components with other ones using the same service contracts, as new services contracts can be added as well. However, current approaches for modeling and verification of service-oriented architectures do not support these important capabilities to their full extend.In this report we present an extension of the current OMG proposal for service modeling with UML - SoaML - which overcomes these limitations. It permits modeling services and their service contracts at different levels of abstraction, provides a formal semantics for all modeling concepts, and enables verifying critical properties. Our compositional and incremental verification approach allows for complex properties including communication parameters and time and covers besides the dynamic binding of service contracts and the replacement of components also the evolution of the systems by means of new service contracts. The modeling as well as verification capabilities of the presented approach are demonstrated by means of a supply chain example and the verification results of a first prototype are shown. N2 - Service-Orientierte Architekturen erlauben die dynamische Zusammensetzung und Rekonfiguration komplexer, offener IT Landschaften durch Bindung von Service Contracts zur Laufzeit, starten neuer Komponenten und beenden von veralteten. Die Evolution dieser Systeme ist nicht auf den Austausch von Komponenten-Implementierungen bei Beibehaltung der Service-Contracts beschränkt, sondern das Hinzufügen neuer Service-Contracts wird ebenfalls unterstützt. Aktuelle Ansätze zur Modellierung und Verifikation Service-Orientierter Architekturen unterstützen diese wichtigen Eigenschaften, wenn überhaupt, nur unvollständig. In diesem Bericht stellen wir eine Erweiterung des aktuellen OMG Vorschlags zur Service Modellierung mit UML - SoaML - vor, die diese Einschränkungen aufhebt. Unser Ansatz erlaubt die Modellierung von Service Contracts auf verschiedenen Abstraktionsniveaus, besitzt eine fundierte formale Semantik für alle eingeführten Modellierungskonzepte und erlaubt die Verifikation kritischer Eigenschaften. Unser kompositionaler und inkrementeller Verifikationsansatz erlaubt die Verifikation komplexer Eigenschaften einschließlich Kommunikationsparameter und Zeit und deckt neben der dynamischen Bindung von Service Contracts sowie dem Austausch von Komponenten auch die Evolution des gesamten Systems durch das Hinzufügen neuer Service Contracts ab. Die Modellierungs- als auch die Verifikationsfähigkeiten unseres vorgestellten Ansatzes werden durch ein Anwendungsbeispiel aus dem Bereich des Lieferkettenmanagements veranschaulicht. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 75 KW - Service-Orientierte Architekturen KW - Verifikation KW - Contracts KW - Evolution KW - Unbegrenzter Zustandsraum KW - Invarianten KW - Modellierung KW - SoaML KW - Service-Oriented Architecture KW - Verification KW - Contracts KW - Evolution KW - Infinite State KW - Invariants KW - Modeling KW - SoaML KW - Runtime Binding Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-65112 SN - 978-3-86956-246-9 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Giese, Holger A1 - Hildebrandt, Stephan T1 - Efficient model synchronization of large-scale models N2 - Model-driven software development requires techniques to consistently propagate modifications between different related models to realize its full potential. For large-scale models, efficiency is essential in this respect. In this paper, we present an improved model synchronization algorithm based on triple graph grammars that is highly efficient and, therefore, can also synchronize large-scale models sufficiently fast. We can show, that the overall algorithm has optimal complexity if it is dominating the rule matching and further present extensive measurements that show the efficiency of the presented model transformation and synchronization technique. N2 - Die Model-getriebene Softwareentwicklung benötigt Techniken zur Übertragung von Änderungen zwischen verschiedenen zusammenhängenden Modellen, um vollständig nutzbar zu sein. Bei großen Modellen spielt hier die Effizienz eine entscheidende Rolle. In diesem Bericht stellen wir einen verbesserten Modellsynchronisationsalgorithmus vor, der auf Tripel-Graph-Grammatiken basiert. Dieser arbeitet sehr effizient und kann auch sehr große Modelle schnell synchronisieren. Wir können zeigen, dass der Gesamtalgortihmus eine optimale Komplexität aufweist, sofern er die Ausführung dominiert. Die Effizient des Algorithmus' wird durch einige Benchmarkergebnisse belegt. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 28 KW - Model Transformation KW - Model Synchronisation KW - Tripel-Graph-Grammatik KW - Modell-getriebene Softwareentwicklung KW - Model Transformation KW - Model Synchronization KW - Triple Graph Grammars KW - Model-Driven Engineering Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-29281 SN - 978-3-940793-84-3 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Giese, Holger A1 - Hildebrandt, Stephan A1 - Lambers, Leen T1 - Toward bridging the gap between formal semantics and implementation of triple graph grammars N2 - The correctness of model transformations is a crucial element for the model-driven engineering of high quality software. A prerequisite to verify model transformations at the level of the model transformation specification is that an unambiguous formal semantics exists and that the employed implementation of the model transformation language adheres to this semantics. However, for existing relational model transformation approaches it is usually not really clear under which constraints particular implementations are really conform to the formal semantics. In this paper, we will bridge this gap for the formal semantics of triple graph grammars (TGG) and an existing efficient implementation. Whereas the formal semantics assumes backtracking and ignores non-determinism, practical implementations do not support backtracking, require rule sets that ensure determinism, and include further optimizations. Therefore, we capture how the considered TGG implementation realizes the transformation by means of operational rules, define required criteria and show conformance to the formal semantics if these criteria are fulfilled. We further outline how static analysis can be employed to guarantee these criteria. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 37 Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-45219 SN - 978-3-86956-078-6 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Giese, Holger A1 - Hildebrandt, Stephan A1 - Neumann, Stefan A1 - Wätzoldt, Sebastian T1 - Industrial case study on the integration of SysML and AUTOSAR with triple graph grammars N2 - During the overall development of complex engineering systems different modeling notations are employed. For example, in the domain of automotive systems system engineering models are employed quite early to capture the requirements and basic structuring of the entire system, while software engineering models are used later on to describe the concrete software architecture. Each model helps in addressing the specific design issue with appropriate notations and at a suitable level of abstraction. However, when we step forward from system design to the software design, the engineers have to ensure that all decisions captured in the system design model are correctly transferred to the software engineering model. Even worse, when changes occur later on in either model, today the consistency has to be reestablished in a cumbersome manual step. In this report, we present in an extended version of [Holger Giese, Stefan Neumann, and Stephan Hildebrandt. Model Synchronization at Work: Keeping SysML and AUTOSAR Models Consistent. In Gregor Engels, Claus Lewerentz, Wilhelm Schäfer, Andy Schürr, and B. Westfechtel, editors, Graph Transformations and Model Driven Enginering - Essays Dedicated to Manfred Nagl on the Occasion of his 65th Birthday, volume 5765 of Lecture Notes in Computer Science, pages 555–579. Springer Berlin / Heidelberg, 2010.] how model synchronization and consistency rules can be applied to automate this task and ensure that the different models are kept consistent. We also introduce a general approach for model synchronization. Besides synchronization, the approach consists of tool adapters as well as consistency rules covering the overlap between the synchronized parts of a model and the rest. We present the model synchronization algorithm based on triple graph grammars in detail and further exemplify the general approach by means of a model synchronization solution between system engineering models in SysML and software engineering models in AUTOSAR which has been developed for an industrial partner. In the appendix as extension to [19] the meta-models and all TGG rules for the SysML to AUTOSAR model synchronization are documented. N2 - Bei der Entwicklung komplexer technischer Systeme werden verschiedene Modellierungssprachen verwendet. Zum Beispiel werden bei der Entwicklung von Systemen in der Automobilindustrie bereits früh im Entwicklungsprozess Systemmodelle verwendet, um die Anforderungen und die grobe Struktur des Gesamtsystems darzustellen. Später werden Softwaremodelle verwendet, um die konkrete Softwarearchitektur zu modellieren. Jedes Modell stellt spezifische Entwurfsaspekte mit Hilfe passender Notationen auf einem angemessenen Abstraktionsniveau dar. Wenn jedoch vom Systementwurf zum Softwareentwurf übergegangen wird, müssen die Entwicklungsingenieure sicherstellen, dass alle Entwurfsentscheidungen, die im Systemmodell enthalten sind, korrekt auf das Softwaremodell übertragen werden. Sobald danach auch noch Änderungen auftreten, muss die Konsistenz zwischen den Modellen in einem aufwändigen manuellen Schritt wiederhergestellt werden. In diesem Bericht zeigen wir, wie Modellsynchronisation und Konsistenzregeln zur Automatisierung dieses Arbeitsschrittes verwendet und die Konsistenz zwischen den Modellen sichergestellt werden können. Außerdem stellen wir einen allgemeinen Ansatz zur Modellsynchronisation vor. Neben der reinen Synchronisation umfasst unsere Lösung weiterhin Tool-Adapter, sowie Konsistenzregeln, die sowohl die Teile der Modelle abdecken, die synchronisiert werden können, als auch die restlichen Teile. Der Modellsynchronisationsalgorithmus basiert auf Tripel-Graph-Grammatiken und wird im Detail erläutert. An Hand einer konkreten Transformation zwischen SysML- und AUTOSAR-Modellen, die im Rahmen eines Industrieprojektes entwickelt wurde, wird der Ansatz demonstriert. Im Anhang des Berichts sind alle TGG-Regeln für die SysML-zu-AUTOSAR-Transformation dokumentiert. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 57 KW - Model Transformation KW - Model Synchronisation KW - SysML KW - AUTOSAR KW - Tripel-Graph-Grammatik KW - Model Transformation KW - Model Synchronization KW - SysML KW - AUTOSAR KW - Triple Graph Grammar Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-60184 SN - 978-3-86956-191-2 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Gröne, Bernhard A1 - Knöpfel, Andreas A1 - Kugel, Rudolf A1 - Schmidt, Oliver T1 - The Apache Modeling Project N2 - This document presents an introduction to the Apache HTTP Server, covering both an overview and implementation details. It presents results of the Apache Modelling Project done by research assistants and students of the Hasso–Plattner–Institute in 2001, 2002 and 2003. The Apache HTTP Server was used to introduce students to the application of the modeling technique FMC, a method that supports transporting knowledge about complex systems in the domain of information processing (software and hardware as well). After an introduction to HTTP servers in general, we will focus on protocols and web technology. Then we will discuss Apache, its operational environment and its extension capabilities— the module API. Finally we will guide the reader through parts of the Apache source code and explain the most important pieces. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 05 Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-33147 SN - 978-3-937786-14-8 ER - TY - BOOK A1 - Hagedorn, Benjamin A1 - Schöbel, Michael A1 - Uflacker, Matthias A1 - Copaciu, Flavius A1 - Milanovic, Nikola T1 - Proceedings of the fall 2006 workshop of the HPI research school on service-oriented systems engineering N2 - 1. Design and Composition of 3D Geoinformation Services Benjamin Hagedorn 2. Operating System Abstractions for Service-Based Systems Michael Schöbel 3. A Task-oriented Approach to User-centered Design of Service-Based Enterprise Applications Matthias Uflacker 4. A Framework for Adaptive Transport in Service- Oriented Systems based on Performance Prediction Flavius Copaciu 5. Asynchronicity and Loose Coupling in Service-Oriented Architectures Nikola Milanovic T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 18 Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-33052 SN - 978-3-939469-58-2 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Haupt, Michael A1 - Marr, Stefan A1 - Hirschfeld, Robert T1 - CSOM/PL : a virtual machine product line N2 - CSOM/PL is a software product line (SPL) derived from applying multi-dimensional separation of concerns (MDSOC) techniques to the domain of high-level language virtual machine (VM) implementations. For CSOM/PL, we modularised CSOM, a Smalltalk VM implemented in C, using VMADL (virtual machine architecture description language). Several features of the original CSOM were encapsulated in VMADL modules and composed in various combinations. In an evaluation of our approach, we show that applying MDSOC and SPL principles to a domain as complex as that of VMs is not only feasible but beneficial, as it improves understandability, maintainability, and configurability of VM implementations without harming performance. N2 - CSOM/PL ist eine Softwareproduktfamilie (software product line, SPL), die erstellt wurde, indem Techniken der mehrdimensionalen Belangtrennung (multi-dimensional separation of concerns, MDSOC) auf die Domäne der virtuellen Maschinen (VM) für höhere Programmiersprachen angewendet wurden. Dazu wurde CSOM, eine in C implementierte Smalltalk-VM, mittels VMADL (virtual machine architecture description language) in Module zerlegt. Etliche Eigenschaften von CSOM wurden in VMADL-Module gekapselt und auf unterschiedliche Weisen komponiert. Die Auswertung des Ansatzes zeigt, dass die Anwendung von MDSOC- und SPL-Prinzipien auf die komplexe VM-Domäne nicht nur machbar ist, sondern darüber hinaus auch Vorteile mit sich bringt, da die Verständlichkeit, Wartbarkeit und Konfigurierbarkeit von VM-Implementierungen ohne Beeinträchtigung der Ausführungsgeschwindigkeit verbessert werden. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 48 KW - Virtuelle Maschinen KW - Architektur KW - Softwareproduktlinien KW - mehrdimensionale Belangtrennung KW - Virtual machines KW - architecture KW - software product lines KW - multi-dimensional separation of concerns Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-52332 SN - 978-3-86956-134-9 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Hebig, Regina A1 - Giese, Holger T1 - MDE settings in SAP : a descriptive field study N2 - MDE techniques are more and more used in praxis. However, there is currently a lack of detailed reports about how different MDE techniques are integrated into the development and combined with each other. To learn more about such MDE settings, we performed a descriptive and exploratory field study with SAP, which is a worldwide operating company with around 50.000 employees and builds enterprise software applications. This technical report describes insights we got during this study. For example, we identified that MDE settings are subject to evolution. Finally, this report outlines directions for future research to provide practical advises for the application of MDE settings. N2 - Techniken der modellgetriebenen Entwicklung (MDE) werden mehr und mehr in der Praxis eingesetzt. Dabei gibt es wenige detaillierte Berichte darüber wie unterschiedliche MDE-Techniken kombiniert und in die Entwicklung integriert werden. Die vorliegende beschreibende Feldstudie dient dem Zweck, in SAP genutzte MDE-Ansätze detailliert zu beschreiben. SAP ist ein weltweit operierendes Unternehmen, hat ca. 50 000 Mitarbeiter und stellt Softwarelösungen für Firmen her. Der vorliegende technische Bericht beschreibt die Einblicke die wir in dieser Studie erhalten haben. Dazu gehört die Einsicht, dass MDE Ansätze einer Evolution unterliegen. Schließlich umreißt dieser Bericht mögliche Richtungen für zukünftige Forschung um praktische Ratschläge für die Gestaltung von MDE Ansätzen geben zu können. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 58 KW - Model Transformation KW - Model Synchronisation KW - SysML KW - AUTOSAR KW - Tripel-Graph-Grammatik KW - modellgetriebene Entwicklung KW - beschreibende Feldstudie Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-60193 SN - 978-3-86956-192-9 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Hebig, Regina A1 - Giese, Holger A1 - Batoulis, Kimon A1 - Langer, Philipp A1 - Zamani Farahani, Armin A1 - Yao, Gary A1 - Wolowyk, Mychajlo T1 - Development of AUTOSAR standard documents at Carmeq GmbH T1 - Entwicklung der AUTOSAR-Standarddokumente bei Carmeq GmbH BT - a case study BT - eine Fall Studie N2 - This report documents the captured MDE history of Carmeq GmbH, in context of the project Evolution of MDE Settings in Practice. The goal of the project is the elicitation of MDE approaches and their evolution. N2 - Dieser technische Bericht dokumentiert wie sich der MDE Ansatz zur Entwicklung von Softwarestandardisierungsdokumenten bei der Carmeq GmbH im Laufe der Zeit verändert hat. Diese Historie wurde im Rahmen des Projektes "Evolution of MDE Settings in Practice" (Evolution von MDE Ansätzen in der Praxis) erstellt. Ziel dieses Projektes ist die Erhebung von MDE Ansätzen und ihrer Evolution. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 92 KW - model-driven engineering KW - MDE settings KW - evolution in MDE KW - case study KW - modellgetriebene Entwicklung KW - MDE Ansatz KW - Evolution in MDE KW - Fallstudie Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-71535 SN - 978-3-86956-317-6 SN - 1613-5652 SN - 2191-1665 IS - 92 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Herschel, Melanie A1 - Naumann, Felix T1 - Space and time scalability of duplicate detection in graph data N2 - Duplicate detection consists in determining different representations of real-world objects in a database. Recent research has considered the use of relationships among object representations to improve duplicate detection. In the general case where relationships form a graph, research has mainly focused on duplicate detection quality/effectiveness. Scalability has been neglected so far, even though it is crucial for large real-world duplicate detection tasks. In this paper we scale up duplicate detection in graph data (DDG) to large amounts of data and pairwise comparisons, using the support of a relational database system. To this end, we first generalize the process of DDG. We then present how to scale algorithms for DDG in space (amount of data processed with limited main memory) and in time. Finally, we explore how complex similarity computation can be performed efficiently. Experiments on data an order of magnitude larger than data considered so far in DDG clearly show that our methods scale to large amounts of data not residing in main memory. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 25 Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-32851 SN - 978-3-940793-46-1 ER - TY - BOOK A1 - Hu, Ji A1 - Cordel, Dirk A1 - Meinel, Christoph T1 - A virtual machine architecture for creating IT-security laboratories N2 - E-learning is a flexible and personalized alternative to traditional education. Nonetheless, existing e-learning systems for IT security education have difficulties in delivering hands-on experience because of the lack of proximity. Laboratory environments and practical exercises are indispensable instruction tools to IT security education, but security education in con-ventional computer laboratories poses the problem of immobility as well as high creation and maintenance costs. Hence, there is a need to effectively transform security laboratories and practical exercises into e-learning forms. This report introduces the Tele-Lab IT-Security architecture that allows students not only to learn IT security principles, but also to gain hands-on security experience by exercises in an online laboratory environment. In this architecture, virtual machines are used to provide safe user work environments instead of real computers. Thus, traditional laboratory environments can be cloned onto the Internet by software, which increases accessibilities to laboratory resources and greatly reduces investment and maintenance costs. Under the Tele-Lab IT-Security framework, a set of technical solutions is also proposed to provide effective functionalities, reliability, security, and performance. The virtual machines with appropriate resource allocation, software installation, and system configurations are used to build lightweight security laboratories on a hosting computer. Reliability and availability of laboratory platforms are covered by the virtual machine management framework. This management framework provides necessary monitoring and administration services to detect and recover critical failures of virtual machines at run time. Considering the risk that virtual machines can be misused for compromising production networks, we present security management solutions to prevent misuse of laboratory resources by security isolation at the system and network levels. This work is an attempt to bridge the gap between e-learning/tele-teaching and practical IT security education. It is not to substitute conventional teaching in laboratories but to add practical features to e-learning. This report demonstrates the possibility to implement hands-on security laboratories on the Internet reliably, securely, and economically. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 13 Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-33077 SN - 978-3-939469-13-1 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Klauck, Stefan A1 - Maschler, Fabian A1 - Tausche, Karsten T1 - Proceedings of the Fourth HPI Cloud Symposium "Operating the Cloud" 2016 N2 - Every year, the Hasso Plattner Institute (HPI) invites guests from industry and academia to a collaborative scientific workshop on the topic Every year, the Hasso Plattner Institute (HPI) invites guests from industry and academia to a collaborative scientific workshop on the topic "Operating the Cloud". Our goal is to provide a forum for the exchange of knowledge and experience between industry and academia. Co-located with the event is the HPI's Future SOC Lab day, which offers an additional attractive and conducive environment for scientific and industry related discussions. "Operating the Cloud" aims to be a platform for productive interactions of innovative ideas, visions, and upcoming technologies in the field of cloud operation and administration. On the occasion of this symposium we called for submissions of research papers and practitioner's reports. A compilation of the research papers realized during the fourth HPI cloud symposium "Operating the Cloud" 2016 are published in this proceedings. We thank the authors for exciting presentations and insights into their current work and research. Moreover, we look forward to more interesting submissions for the upcoming symposium later in the year. Every year, the Hasso Plattner Institute (HPI) invites guests from industry and academia to a collaborative scientific workshop on the topic "Operating the Cloud". Our goal is to provide a forum for the exchange of knowledge and experience between industry and academia. Co-located with the event is the HPI's Future SOC Lab day, which offers an additional attractive and conducive environment for scientific and industry related discussions. "Operating the Cloud" aims to be a platform for productive interactions of innovative ideas, visions, and upcoming technologies in the field of cloud operation and administration. N2 - Jedes Jahr lädt das Hasso-Plattner-Institut (HPI) Gäste aus der Industrie und der Wissenschaft zu einem kooperativen und wissenschaftlichen Workshop zum Thema Cloud Computing ein. Unser Ziel ist es, ein Forum für den Austausch von Wissen und Erfahrungen zwischen der Industrie und der Wissenschaft zu bieten. Parallel zur Veranstaltung findet der HPI Future SOC Lab Tag statt, der eine zusätzliche attraktive Umgebung für wissenschaftliche und branchenbezogene Diskussionen bietet. Der Workshop zielt darauf ab, eine Plattform für produktive Interaktionen von innovativen Ideen, Visionen und aufkommenden Technologien im Bereich von Cloud Computing zu bitten. Anlässlich dieses Symposiums fordern wir die Einreichung von Forschungsarbeiten und Erfahrungsberichte. Eine Zusammenstellung der im Rahmen des vierten HPI-Cloud-Symposiums "Operating the Cloud" 2016 angenommenen Forschungspapiere wird veröffentlicht. Wir danken den Autoren für spannende Vorträge und Einblicke in ihre aktuelle Arbeit und Forschung. Darüber hinaus freuen wir uns auf weitere interessante Einreichungen für das kommende Symposium im Laufe des Jahres. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 117 KW - cloud security KW - cloud storage KW - dependable computing KW - resource optimization KW - in-memory database KW - distribution algorithm KW - virtualization KW - Cloud-Speicher KW - Cloud-Sicherheit KW - zuverlässige Datenverarbeitung KW - Ressourcenoptimierung KW - In-Memory Datenbank KW - Verteilungsalgorithmen KW - Virtualisierung Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-394513 SN - 978-3-86956-401-2 SN - 1613-5652 SN - 2191-1665 IS - 117 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Kleine, Matthias A1 - Hirschfeld, Robert A1 - Bracha, Gilad T1 - An abstraction for version control systems T3 - Technische Berichte des Hasso-Plattner-Instituts für Softwaresystemtechnik an der Universität Potsdam N2 - Versionsverwaltungssysteme (VCS) ermöglichen es Entwicklern, Änderungen an Softwareartifakten zu verwalten. VCS werden mit Hilfe einer Vielzahl verschiedener Werkzeuge bedient, wie z.\,B. graphische Front-ends oder Kommandozeilenwerkzeuge. Es ist wünschenswert mit einzelnen solcher Werkzeuge unterschiedliche VCS bedienen zu können. Bislang hat sich jedoch keine Abstraktion für Versionsverwaltungssysteme durchgesetzt, mit deren Hilfe solche Werkzeuge erstellt werden können. Stattdessen implementieren Werkzeuge zur Interaktion mit mehreren VCS ad-hoc Lösungen. Diese Masterarbeit stellt Pur vor, eine Abstraktion über Versionsverwaltungskonzepte. Mit Hilfe von Pur können Anwendungsprogramme entwickelt werden, die mit mehreren Versionsverwaltungssystemen interagieren können. Im Rahmen dieser Arbeit wird eine Implementierung dieser Abstraktion bereitgestellt und mit Hilfe eines Anwendungsprogramms validiert. N2 - Version Control Systems (VCS) allow developers to manage changes to software artifacts. Developers interact with VCSs through a variety of client programs, such as graphical front-ends or command line tools. It is desirable to use the same version control client program against different VCSs. Unfortunately, no established abstraction over VCS concepts exists. Instead, VCS client programs implement ad-hoc solutions to support interaction with multiple VCSs. This thesis presents Pur, an abstraction over version control concepts that allows building rich client programs that can interact with multiple VCSs. We provide an implementation of this abstraction and validate it by implementing a client application. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 54 Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-55629 SN - 978-3-86956-158-5 SN - 1613-5652 SN - 2191-1665 IS - 54 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Krause, Christian A1 - Giese, Holger T1 - Quantitative modeling and analysis of service-oriented real-time systems using interval probabilistic timed automata N2 - One of the key challenges in service-oriented systems engineering is the prediction and assurance of non-functional properties, such as the reliability and the availability of composite interorganizational services. Such systems are often characterized by a variety of inherent uncertainties, which must be addressed in the modeling and the analysis approach. The different relevant types of uncertainties can be categorized into (1) epistemic uncertainties due to incomplete knowledge and (2) randomization as explicitly used in protocols or as a result of physical processes. In this report, we study a probabilistic timed model which allows us to quantitatively reason about nonfunctional properties for a restricted class of service-oriented real-time systems using formal methods. To properly motivate the choice for the used approach, we devise a requirements catalogue for the modeling and the analysis of probabilistic real-time systems with uncertainties and provide evidence that the uncertainties of type (1) and (2) in the targeted systems have a major impact on the used models and require distinguished analysis approaches. The formal model we use in this report are Interval Probabilistic Timed Automata (IPTA). Based on the outlined requirements, we give evidence that this model provides both enough expressiveness for a realistic and modular specifiation of the targeted class of systems, and suitable formal methods for analyzing properties, such as safety and reliability properties in a quantitative manner. As technical means for the quantitative analysis, we build on probabilistic model checking, specifically on probabilistic time-bounded reachability analysis and computation of expected reachability rewards and costs. To carry out the quantitative analysis using probabilistic model checking, we developed an extension of the Prism tool for modeling and analyzing IPTA. Our extension of Prism introduces a means for modeling probabilistic uncertainty in the form of probability intervals, as required for IPTA. For analyzing IPTA, our Prism extension moreover adds support for probabilistic reachability checking and computation of expected rewards and costs. We discuss the performance of our extended version of Prism and compare the interval-based IPTA approach to models with fixed probabilities. N2 - Eine der wichtigsten Herausforderungen in der Entwicklung von Service-orientierten Systemen ist die Vorhersage und die Zusicherung von nicht-funktionalen Eigenschaften, wie Ausfallsicherheit und Verfügbarkeit von zusammengesetzten, interorganisationellen Diensten. Diese Systeme sind oft charakterisiert durch eine Vielzahl von inhärenten Unsicherheiten, welche sowohl in der Modellierung als auch in der Analyse eine Rolle spielen. Die verschiedenen relevanten Arten von Unsicherheiten können eingeteilt werden in (1) epistemische Unsicherheiten aufgrund von unvollständigem Wissen und (2) Zufall als Mittel in Protokollen oder als Resultat von physikalischen Prozessen. In diesem Bericht wird ein probabilistisches, Zeit-behaftetes Modell untersucht, welches es ermöglicht quantitative Aussagen über nicht-funktionale Eigenschaften von einer eingeschränkten Klasse von Service-orientierten Echtzeitsystemen mittels formaler Methoden zu treffen. Zur Motivation und Einordnung wird ein Anforderungskatalog für probabilistische Echtzeitsysteme mit Unsicherheiten erstellt und gezeigt, dass die Unsicherheiten vom Typ (1) und (2) in den untersuchten Systemen einen Ein uss auf die Wahl der Modellierungs- und der Analysemethode haben. Als formales Modell werden Interval Probabilistic Timed Automata (IPTA) benutzt. Basierend auf den erarbeiteten Anforderungen wird gezeigt, dass dieses Modell sowohl ausreichende Ausdrucksstärke für eine realistische und modulare Spezifikation als auch geeignete formale Methoden zur Bestimmung von quantitativen Sicherheits- und Zuverlässlichkeitseigenschaften bietet. Als technisches Mittel für die quantitative Analyse wird probabilistisches Model Checking, speziell probabilistische Zeit-beschränkte Erreichbarkeitsanalyse und Bestimmung von Erwartungswerten für Kosten und Vergütungen eingesetzt. Um die quantitative Analyse mittels probabilistischem Model Checking durchzuführen, wird eine Erweiterung des Prism-Werkzeugs zur Modellierung und Analyse von IPTA eingeführt. Die präsentierte Erweiterung von Prism ermöglicht die Modellierung von probabilistischen Unsicherheiten mittelsWahrscheinlichkeitsintervallen, wie sie für IPTA benötigt werden. Zur Verifikation wird probabilistische Erreichbarkeitsanalyse und die Berechnung von Erwartungswerten durch das Werkzeug unterstützt. Es wird die Performanz der Prism-Erweiterung untersucht und der Intervall-basierte IPTA-Ansatz mit Modellen mit festen Wahrscheinlichkeitswerten verglichen. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 56 KW - Service-orientierte Systme KW - Echtzeitsysteme KW - Quantitative Analysen KW - Formale Verifikation KW - service-oriented systems KW - real-time systems KW - quantitative analysis KW - formal verification methods Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-57845 SN - 978-3-86956-171-4 PB - Universitätsverlah Potsdam CY - Potsdam ER - TY - BOOK A1 - Kunze, Matthias A1 - Weske, Mathias T1 - Behavioural Models BT - From Modelling Finite Automata to Analysing Business Processes N2 - This textbook introduces the basis for modelling and analysing discrete dynamic systems, such as computer programmes, soft- and hardware systems, and business processes. The underlying concepts are introduced and concrete modelling techniques are described, such as finite automata, state machines, and Petri nets. The concepts are related to concrete application scenarios, among which business processes play a prominent role. The book consists of three parts, the first of which addresses the foundations of behavioural modelling. After a general introduction to modelling, it introduces transition systems as a basic formalism for representing the behaviour of discrete dynamic systems. This section also discusses causality, a fundamental concept for modelling and reasoning about behaviour. In turn, Part II forms the heart of the book and is devoted to models of behaviour. It details both sequential and concurrent systems and introduces finite automata, state machines and several different types of Petri nets. One chapter is especially devoted to business process models, workflow patterns and BPMN, the industry standard for modelling business processes. Lastly, Part III investigates how the behaviour of systems can be analysed. To this end, it introduces readers to the concept of state spaces. Further chapters cover the comparison of behaviour and the formal analysis and verification of behavioural models. The book was written for students of computer science and software engineering, as well as for programmers and system analysts interested in the behaviour of the systems they work on. It takes readers on a journey from the fundamentals of behavioural modelling to advanced techniques for modelling and analysing sequential and concurrent systems, and thus provides them a deep understanding of the concepts and techniques introduced and how they can be applied to concrete application scenarios. Y1 - 2016 SN - 978-3-319-44958-6 PB - Springer CY - Cham ER - TY - BOOK A1 - Kuropka, Dominik A1 - Meyer, Harald T1 - Survey on Service Composition N2 - It is predicted that Service-oriented Architectures (SOA) will have a high impact on future electronic business and markets. Services will provide an self-contained and standardised interface towards business and are considered as the future platform for business-to-business and business-toconsumer trades. Founded by the complexity of real world business scenarios a huge need for an easy, flexible and automated creation and enactment of service compositions is observed. This survey explores the relationship of service composition with workflow management—a technology/ concept already in use in many business environments. The similarities between the both and the key differences between them are elaborated. Furthermore methods for composition of services ranging from manual, semi- to full-automated composition are sketched. This survey concludes that current tools for service composition are in an immature state and that there is still much research to do before service composition can be used easily and conveniently in real world scenarios. However, since automated service composition is a key enabler for the full potential of Service-oriented Architectures, further research on this field is imperative. This survey closes with a formal sample scenario presented in appendix A to give the reader an impression on how full-automated service composition works. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 10 Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-33787 SN - 3-937786-78-3 SN - 978-3-937786-78-0 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Lange, Dustin A1 - Böhm, Christoph A1 - Naumann, Felix T1 - Extracting structured information from Wikipedia articles to populate infoboxes N2 - Roughly every third Wikipedia article contains an infobox - a table that displays important facts about the subject in attribute-value form. The schema of an infobox, i.e., the attributes that can be expressed for a concept, is defined by an infobox template. Often, authors do not specify all template attributes, resulting in incomplete infoboxes. With iPopulator, we introduce a system that automatically populates infoboxes of Wikipedia articles by extracting attribute values from the article's text. In contrast to prior work, iPopulator detects and exploits the structure of attribute values for independently extracting value parts. We have tested iPopulator on the entire set of infobox templates and provide a detailed analysis of its effectiveness. For instance, we achieve an average extraction precision of 91% for 1,727 distinct infobox template attributes. N2 - Ungefähr jeder dritte Wikipedia-Artikel enthält eine Infobox - eine Tabelle, die wichtige Fakten über das beschriebene Thema in Attribut-Wert-Form darstellt. Das Schema einer Infobox, d.h. die Attribute, die für ein Konzept verwendet werden können, wird durch ein Infobox-Template definiert. Häufig geben Autoren nicht für alle Template-Attribute Werte an, wodurch unvollständige Infoboxen entstehen. Mit iPopulator stellen wir ein System vor, welches automatisch Infoboxen von Wikipedia-Artikeln durch Extrahieren von Attributwerten aus dem Artikeltext befüllt. Im Unterschied zu früheren Arbeiten erkennt iPopulator die Struktur von Attributwerten und nutzt diese aus, um die einzelnen Bestandteile von Attributwerten unabhängig voneinander zu extrahieren. Wir haben iPopulator auf der gesamten Menge der Infobox-Templates getestet und analysieren detailliert die Effektivität. Wir erreichen beispielsweise für die Extraktion einen durchschnittlichen Precision-Wert von 91% für 1.727 verschiedene Infobox-Template-Attribute. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 38 KW - Informationsextraktion KW - Wikipedia KW - Linked Data KW - Information Extraction KW - Wikipedia KW - Linked Data Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-45714 SN - 978-3-86956-081-6 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Linckels, Serge A1 - Meinel, Christoph T1 - An e-librarian service : natural language interface for an efficient semantic search within multimedia resources N2 - 1 Introduction 1.1 Project formulation 1.2 Our contribution 2 Pedagogical Aspect 4 2.1 Modern teaching 2.2 Our Contribution 2.2.1 Autonomous and exploratory learning 2.2.2 Human machine interaction 2.2.3 Short multimedia clips 3 Ontology Aspect 3.1 Ontology driven expert systems 3.2 Our contribution 3.2.1 Ontology language 3.2.2 Concept Taxonomy 3.2.3 Knowledge base annotation 3.2.4 Description Logics 4 Natural language approach 4.1 Natural language processing in computer science 4.2 Our contribution 4.2.1 Explored strategies 4.2.2 Word equivalence 4.2.3 Semantic interpretation 4.2.4 Various problems 5 Information Retrieval Aspect 5.1 Modern information retrieval 5.2 Our contribution 5.2.1 Semantic query generation 5.2.2 Semantic relatedness 6 Implementation 6.1 Prototypes 6.2 Semantic layer architecture 6.3 Development 7 Experiments 7.1 Description of the experiments 7.2 General characteristics of the three sessions, instructions and procedure 7.3 First Session 7.4 Second Session 7.5 Third Session 7.6 Discussion and conclusion 8 Conclusion and future work 8.1 Conclusion 8.2 Open questions A Description Logics B Probabilistic context-free grammars T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 12 Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-33088 SN - 978-3-937786-89-6 SN - 3-937786-89-9 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Lübbe, Alexander T1 - The effect of tangible media on individuals in business process modeling : a controlled experiment = Der Einfluss greifbarer Medien auf einzelne Personen bei der Geschäftsprozessmodellierung : ein kontrolliertes Experiment N2 - In current practice, business processes modeling is done by trained method experts. Domain experts are interviewed to elicit their process information but not involved in modeling. We created a haptic toolkit for process modeling that can be used in process elicitation sessions with domain experts. We hypothesize that this leads to more effective process elicitation. This paper brakes down "effective elicitation" to 14 operationalized hypotheses. They are assessed in a controlled experiment using questionnaires, process model feedback tests and video analysis. The experiment compares our approach to structured interviews in a repeated measurement design. We executed the experiment with 17 student clerks from a trade school. They represent potential users of the tool. Six out of fourteen hypotheses showed significant difference due to the method applied. Subjects reported more fun and more insights into process modeling with tangible media. Video analysis showed significantly more reviews and corrections applied during process elicitation. Moreover, people take more time to talk and think about their processes. We conclude that tangible media creates a different working mode for people in process elicitation with fun, new insights and instant feedback on preliminary results. N2 - Heute, werden Geschäftsprozesse durch speziell ausgebildete Modellierungsexperten erstellt. Wissensträger der Domäne werden befragt, aber sie werden nicht in die Modellierung einbezogen. Wir haben ein haptisches Werkzeug zur Prozessmodellierung entwickelt welches bei der Prozesserhebung zusammen mit den Domänenexperten eingesetzt wird. Wir vertreten die Hypothese, dass dies zur effizienteren Prozesserhebung beiträgt. In diesem Artikel schlüsseln wir "effiziente Prozesserhebung" in 14 operationalisierte Hypothesen auf. Diese werden in einem kontrollierten Experiment mit Hilfe von Fragebögen, Tests und Videoanalyse untersucht. In dem Experiment vergleichen wir unseren Ansatz mit strukturierten Interviews in einem Messwiederholungsdesign. Das Experiment wurde mit 17 Schülern kaufmännischer Berufe in einem Oberstufenzentrum durchgeführt. Sie repräsentieren potentielle Anwender unseres Ansatzes zu Prozesserhebung. Sechs der vierzehn Hypothesen zeigten einen signifikanten Unterschied zwischen den beiden Ansätzen. Teilnehmer berichteten mehr Spass an und mehr Erkenntnisse durch greifbare Prozessmodellierung zu haben. In der Videoanalyse beobachteten wir, dass Teilnehmer häufiger Ihre Aussagen prüfen und korrigieren. Außerdem wurde mehr Zeit für das Reden und Nachdenken über die Prozesse verwendet. Wir schlussfolgern, dass greifbare Medien ein anderes Arbeitsumfeld begünstigen mit mehr Spaß, neuen Erkenntnissen und direktem Feedback auf vorläufige Ergebnisse. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 41 KW - Prozessmodellierung KW - erfahrbare Medien KW - Individuen KW - Prozesserhebung KW - BPMN KW - t.BPM KW - kontrolliertes Experiment KW - Process Modeling KW - tangible media KW - individuals KW - process elicitation KW - BPMN KW - t.BPM KW - controlled experiment Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-49001 SN - 978-3-86956-108-0 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Maximova, Maria A1 - Giese, Holger A1 - Krause, Christian T1 - Probabilistic timed graph transformation systems T1 - Probabilistische zeitbehaftete Graphtransformationssysteme N2 - Today, software has become an intrinsic part of complex distributed embedded real-time systems. The next generation of embedded real-time systems will interconnect the today unconnected systems via complex software parts and the service-oriented paradigm. Therefore besides timed behavior and probabilistic behaviour also structure dynamics, where the architecture can be subject to changes at run-time, e.g. when dynamic binding of service end-points is employed or complex collaborations are established dynamically, is required. However, a modeling and analysis approach that combines all these necessary aspects does not exist so far. To fill the identified gap, we propose Probabilistic Timed Graph Transformation Systems (PTGTSs) as a high-level description language that supports all the necessary aspects of structure dynamics, timed behavior, and probabilistic behavior. We introduce the formal model of PTGTSs in this paper and present a mapping of models with finite state spaces to probabilistic timed automata (PTA) that allows to use the PRISM model checker to analyze PTGTS models with respect to PTCTL properties. N2 - Software gehört heutzutage zu einem wesentlichen Bestandteil von komplexen eingebetteten Echtzeitsystemen. Die nächste Generation von eingebetteten Echtzeitsystemen wird in der Zukunft die bisher nicht verbundenen Systeme durch komplexe Softwarelösungen unter der Verwendung des serviceorientierten Paradigmas verbinden. Deswegen wird neben der Beschreibung des zeitbehafteten und probabilistischen Verhaltens auch die Betrachtung der Strukturdynamik benötigt, um die Modellierung der Architekturänderungen während der Laufzeit zu ermöglichen, wie z. B. die dynamische Anbindung von den Endpunkten der Services oder die dynamische Erstellung der komplexen Kollaborationen. Allerdings gibt es noch keinen Ansatz für die Modellierung und Analyse, der all diese drei notwendigen Aspekte kombiniert. Um die identifizierte Lücke zu schließen, führen wir probabilistische zeitbehaftete Graphtransformationssysteme (kurz PTGTS) ein, die als abstrakte Beschreibungssprache dienen und die notwendigen Aspekte der Strukturdynamik, des zeitbehafteten Verhaltens und des probabilistischen Verhaltens unterstützen. Außerdem stellen wir den Formalismus der probabilistischen zeitbehafteten Graphtransformationssysteme vor und definieren eine Abbildung zwischen den Modellen mit endlichen Zustandsräumen und probabilistischen zeitbehafteten Automaten, die die Nutzung des PRISM Modell-Checkers für die Analyse der PTGTS Modelle in Bezug auf PTCTL Eigenschaften ermöglichen. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 118 KW - graph transformations KW - probabilistic timed automata KW - PTCTL KW - PRISM model checker KW - HENSHIN KW - Graphtransformationen KW - probabilistische zeitbehaftete Automaten KW - PTCTL KW - PRISM Modell-Checker KW - HENSHIN Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-397055 SN - 978-3-86956-405-0 SN - 1613-5652 SN - 2191-1665 IS - 118 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Meinel, Christoph A1 - Plattner, Hasso A1 - Döllner, Jürgen Roland Friedrich A1 - Weske, Mathias A1 - Polze, Andreas A1 - Hirschfeld, Robert A1 - Naumann, Felix A1 - Giese, Holger A1 - Baudisch, Patrick T1 - Proceedings of the 7th Ph.D. Retreat of the HPI Research School on Service-oriented Systems Engineering N2 - Design and Implementation of service-oriented architectures imposes a huge number of research questions from the fields of software engineering, system analysis and modeling, adaptability, and application integration. Component orientation and web services are two approaches for design and realization of complex web-based system. Both approaches allow for dynamic application adaptation as well as integration of enterprise application. Commonly used technologies, such as J2EE and .NET, form de facto standards for the realization of complex distributed systems. Evolution of component systems has lead to web services and service-based architectures. This has been manifested in a multitude of industry standards and initiatives such as XML, WSDL UDDI, SOAP, etc. All these achievements lead to a new and promising paradigm in IT systems engineering which proposes to design complex software solutions as collaboration of contractually defined software services. Service-Oriented Systems Engineering represents a symbiosis of best practices in object-orientation, component-based development, distributed computing, and business process management. It provides integration of business and IT concerns. The annual Ph.D. Retreat of the Research School provides each member the opportunity to present his/her current state of their research and to give an outline of a prospective Ph.D. thesis. Due to the interdisciplinary structure of the Research Scholl, this technical report covers a wide range of research topics. These include but are not limited to: Self-Adaptive Service-Oriented Systems, Operating System Support for Service-Oriented Systems, Architecture and Modeling of Service-Oriented Systems, Adaptive Process Management, Services Composition and Workflow Planning, Security Engineering of Service-Based IT Systems, Quantitative Analysis and Optimization of Service-Oriented Systems, Service-Oriented Systems in 3D Computer Graphics sowie Service-Oriented Geoinformatics. N2 - Der Entwurf und die Realisierung dienstbasierender Architekturen wirft eine Vielzahl von Forschungsfragestellungen aus den Gebieten der Softwaretechnik, der Systemmodellierung und -analyse, sowie der Adaptierbarkeit und Integration von Applikationen auf. Komponentenorientierung und WebServices sind zwei Ansätze für den effizienten Entwurf und die Realisierung komplexer Web-basierender Systeme. Sie ermöglichen die Reaktion auf wechselnde Anforderungen ebenso, wie die Integration großer komplexer Softwaresysteme. Heute übliche Technologien, wie J2EE und .NET, sind de facto Standards für die Entwicklung großer verteilter Systeme. Die Evolution solcher Komponentensysteme führt über WebServices zu dienstbasierenden Architekturen. Dies manifestiert sich in einer Vielzahl von Industriestandards und Initiativen wie XML, WSDL, UDDI, SOAP. All diese Schritte führen letztlich zu einem neuen, vielversprechenden Paradigma für IT Systeme, nach dem komplexe Softwarelösungen durch die Integration vertraglich vereinbarter Software-Dienste aufgebaut werden sollen. "Service-Oriented Systems Engineering" repräsentiert die Symbiose bewährter Praktiken aus den Gebieten der Objektorientierung, der Komponentenprogrammierung, des verteilten Rechnen sowie der Geschäftsprozesse und berücksichtigt auch die Integration von Geschäftsanliegen und Informationstechnologien. Die Klausurtagung des Forschungskollegs "Service-oriented Systems Engineering" findet einmal jährlich statt und bietet allen Kollegiaten die Möglichkeit den Stand ihrer aktuellen Forschung darzulegen. Bedingt durch die Querschnittstruktur des Kollegs deckt dieser Bericht ein große Bandbreite aktueller Forschungsthemen ab. Dazu zählen unter anderem Self-Adaptive Service-Oriented Systems, Operating System Support for Service-Oriented Systems, Architecture and Modeling of Service-Oriented Systems, Adaptive Process Management, Services Composition and Workflow Planning, Security Engineering of Service-Based IT Systems, Quantitative Analysis and Optimization of Service-Oriented Systems, Service-Oriented Systems in 3D Computer Graphics sowie Service-Oriented Geoinformatics. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 83 KW - Hasso-Plattner-Institut KW - Forschungskolleg KW - Klausurtagung KW - Service-oriented Systems Engineering KW - Hasso Plattner Institute KW - Research School KW - Ph.D. Retreat KW - Service-oriented Systems Engineering Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-63490 SN - 978-3-86956-273-5 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Meinel, Christoph A1 - Sack, Harald A1 - Bross, Justus T1 - Erster Deutscher IPv6 Gipfel N2 - Inhalt: KOMMUNIQUÉ GRUßWORT PROGRAMM HINTERGRÜNDE UND FAKTEN REFERENTEN: BIOGRAFIE & VOTRAGSZUSAMMENFASSUNG 1.) DER ERSTE DEUTSCHE IPV6 GIPFEL AM HASSO PLATTNER INSTITUT IN POTSDAM - PROF. DR. CHRISTOPH MEINEL - VIVIANE REDING 2.) IPV6, ITS TIME HAS COME - VINTON CERF 3.) DIE BEDEUTUNG VON IPV6 FÜR DIE ÖFFENTLICHE VERWALTUNG IN DEUTSCHLAND - MARTIN SCHALLBRUCH 4.) TOWARDS THE FUTURE OF THE INTERNET - PROF. DR. LUTZ HEUSER 5.) IPV6 STRATEGY & DEPLOYMENT STATUS IN JAPAN - HIROSHI MIYATA 6.) IPV6 STRATEGY & DEPLOYMENT STATUS IN CHINA - PROF. WU HEQUAN 7.) IPV6 STRATEGY AND DEPLOYMENT STATUS IN KOREA - DR. EUNSOOK KIM 8.) IPV6 DEPLOYMENT EXPERIENCES IN GREEK SCHOOL NETWORK - ATHANASSIOS LIAKOPOULOS 9.) IPV6 NETWORK MOBILITY AND IST USAGE - JEAN-MARIE BONNIN 10.) IPV6 - RÜSTZEUG FÜR OPERATOR & ISP IPV6 DEPLOYMENT UND STRATEGIEN DER DEUTSCHEN TELEKOM - HENNING GROTE 11.) VIEW FROM THE IPV6 DEPLOYMENT FRONTLINE - YVES POPPE 12.) DEPLOYING IPV6 IN MOBILE ENVIRONMENTS - WOLFGANG FRITSCHE 13.) PRODUCTION READY IPV6 FROM CUSTOMER LAN TO THE INTERNET - LUTZ DONNERHACKE 14.) IPV6 - DIE BASIS FÜR NETZWERKZENTRIERTE OPERATIONSFÜHRUNG (NETOPFÜ) IN DER BUNDESWEHR HERAUSFORDERUNGEN - ANWENDUNGSFALLBETRACHTUNGEN - AKTIVITÄTEN - CARSTEN HATZIG 15.) WINDOWS VISTA & IPV6 - BERND OURGHANLIAN 16.) IPV6 & HOME NETWORKING TECHINCAL AND BUSINESS CHALLENGES - DR. TAYEB BEN MERIEM 17.) DNS AND DHCP FOR DUAL STACK NETWORKS - LAWRENCE HUGHES 18.) CAR INDUSTRY: GERMAN EXPERIENCE WITH IPV6 - AMARDEO SARMA 19.) IPV6 & AUTONOMIC NETWORKING - RANGANAI CHAPARADZA 20.) P2P & GRID USING IPV6 AND MOBILE IPV6 - DR. LATIF LADID T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 24 Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-32865 ER - TY - BOOK A1 - Meinel, Christoph A1 - Willems, Christian T1 - openHPI : the MOOC offer at Hasso Plattner Institute N2 - The new interactive online educational platform openHPI, (https://openHPI.de) from Hasso Plattner Institute (HPI), offers freely accessible courses at no charge for all who are interested in subjects in the field of information technology and computer science. Since 2011, “Massive Open Online Courses,” called MOOCs for short, have been offered, first at Stanford University and then later at other U.S. elite universities. Following suit, openHPI provides instructional videos on the Internet and further reading material, combined with learning-supportive self-tests, homework and a social discussion forum. Education is further stimulated by the support of a virtual learning community. In contrast to “traditional” lecture platforms, such as the tele-TASK portal (http://www.tele-task.de) where multimedia recorded lectures are available on demand, openHPI offers didactic online courses. The courses have a fixed start date and offer a balanced schedule of six consecutive weeks presented in multimedia and, whenever possible, interactive learning material. Each week, one chapter of the course subject is treated. In addition, a series of learning videos, texts, self-tests and homework exercises are provided to course participants at the beginning of the week. The course offering is combined with a social discussion platform where participants have the opportunity to enter into an exchange with course instructors and fellow participants. Here, for example, they can get answers to questions and discuss the topics in depth. The participants naturally decide themselves about the type and range of their learning activities. They can make personal contributions to the course, for example, in blog posts or tweets, which they can refer to in the forum. In turn, other participants have the chance to comment on, discuss or expand on what has been said. In this way, the learners become the teachers and the subject matter offered to a virtual community is linked to a social learning network. N2 - Die neue interaktive Online-Bildungsplattform openHPI (https://openHPI.de) des Hasso-Plattner-Instituts (HPI) bietet frei zugängliche und kostenlose Onlinekurse für interessierte Teilnehmer an, die sich mit Inhalten aus dem Bereich der Informationstechnologien und Informatik beschäftige¬n. Wie die seit 2011 zunächst von der Stanford University, später aber auch von anderen Elite-Universitäten der USA angeboten „Massive Open Online Courses“, kurz MOOCs genannt, bietet openHPI im Internet Lernvideos und weiterführenden Lesestoff in einer Kombination mit lernunterstützenden Selbsttests, Hausaufgaben und einem sozialen Diskussionsforum an und stimuliert die Ausbildung einer das Lernen fördernden virtuellen Lerngemeinschaft. Im Unterschied zu „traditionellen“ Vorlesungsportalen, wie z.B. dem tele-TASK Portal (http://www.tele-task.de), bei dem multimedial aufgezeichnete Vorlesungen zum Abruf bereit gestellt werden, bietet openHPI didaktisch aufbereitete Onlinekurse an. Diese haben einen festen Starttermin und bieten dann in einem austarierten Zeitplan von sechs aufeinanderfolgenden Kurswochen multimedial aufbereitete und wann immer möglich interaktive Lehrmaterialien. In jeder Woche wird ein Kapitel des Kursthemas behandelt. Dazu werden zu Wochenbeginn eine Reihe von Lehrvideos, Texten, Selbsttests und ein Hausaufgabenblatt bereitgestellt, mit denen sich die Kursteilnehmer in dieser Woche beschäftigen. Kombiniert sind die Angebote mit einer sozialen Diskussionsplattform, auf der sich die Teilnehmer mit den Kursbetreuern und anderen Teilnehmern austauschen, Fragen klären und weiterführende Themen diskutieren können. Natürlich entscheiden die Teilnehmer selbst über Art und Umfang ihrer Lernaktivitäten. Sie können in den Kurs eigene Beiträge einbringen, zum Beispiel durch Blogposts oder Tweets, auf die sie im Forum verweisen. Andere Lernende können diese dann kommentieren, diskutieren oder ihrerseits erweitern. Auf diese Weise werden die Lernenden, die Lehrenden und die angebotenen Lerninhalte in einer virtuellen Gemeinschaft, einem sozialen Lernnetzwerk miteinander verknüpft. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 80 KW - Online-Lernen KW - E-Learning KW - MOOCs KW - Onlinekurs KW - openHPI KW - tele-TASK KW - Tele-Lab KW - Tele-Teaching KW - Online-Learning KW - E-Learning KW - MOOCs KW - Online Course KW - openHPI KW - tele-TASK KW - Tele-Lab KW - Tele-Teaching Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-67176 SN - 978-3-86956-264-3 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Meyer, Andreas A1 - Pufahl, Luise A1 - Fahland, Dirk A1 - Weske, Mathias T1 - Modeling and enacting complex data dependencies in business processes N2 - Enacting business processes in process engines requires the coverage of control flow, resource assignments, and process data. While the first two aspects are well supported in current process engines, data dependencies need to be added and maintained manually by a process engineer. Thus, this task is error-prone and time-consuming. In this report, we address the problem of modeling processes with complex data dependencies, e.g., m:n relationships, and their automatic enactment from process models. First, we extend BPMN data objects with few annotations to allow data dependency handling as well as data instance differentiation. Second, we introduce a pattern-based approach to derive SQL queries from process models utilizing the above mentioned extensions. Therewith, we allow automatic enactment of data-aware BPMN process models. We implemented our approach for the Activiti process engine to show applicability. N2 - Die Ausführung von Geschäftsprozessen in Process Engines benötigt Informationen über den Kontrollfluss, die Rollenzuordnungen und die Datenabhängigkeiten. Während die ersten beiden Aspekte bereits automatisiert von Process Engines unterstützt werden, müssen die Datenabhängigkeiten durch einen Prozessingenieur manuell hinzugefügt und gewartet werden. Allerdings ist diese Aufgabe sehr fehleranfällig und zeitintensiv. In diesem Report zeigen wir wie Prozesse mit komplexen Datenabhängigkeiten, z.B. m:n Beziehungen, modelliert und automatisiert ausgeführt werden können. Dazu erweitern wir zuerst BPMN Datenobjekte mit wenigen Annotationen, um das Handling von Datenabhängikeiten sowie die Differenzierung von Datenobjektinstanzen zu ermöglichen. Danach beschreiben wir einen Pattern-basierten Ansatz, um SQL-Queries, unter Nutzung der oben erwähnten Erweiterungen, aus Prozessmodellen abzuleiten. Damit erlauben wir die automatisierte Ausführung von Daten-orientierten BPMN Prozessmodellen. Um die Anwendbarkeit unseres Ansatzen zu demonstieren, implementierten wir ihn für die Process Engine Activiti. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 74 KW - Prozessmodellierung KW - Datenmodellierung KW - Prozessausführung KW - BPMN KW - SQL KW - Process Modeling KW - Data Modeling KW - Process Enactment KW - BPMN KW - SQL Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-65103 SN - 978-3-86956-245-2 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Meyer, Andreas A1 - Weske, Mathias T1 - Weak conformance between process models and synchronized object life cycles N2 - Process models specify behavioral execution constraints between activities as well as between activities and data objects. A data object is characterized by its states and state transitions represented as object life cycle. For process execution, all behavioral execution constraints must be correct. Correctness can be verified via soundness checking which currently only considers control flow information. For data correctness, conformance between a process model and its object life cycles is checked. Current approaches abstract from dependencies between multiple data objects and require fully specified process models although, in real-world process repositories, often underspecified models are found. Coping with these issues, we introduce the concept of synchronized object life cycles and we define a mapping of data constraints of a process model to Petri nets extending an existing mapping. Further, we apply the notion of weak conformance to process models to tell whether each time an activity needs to access a data object in a particular state, it is guaranteed that the data object is in or can reach the expected state. Then, we introduce an algorithm for an integrated verification of control flow correctness and weak data conformance using soundness checking. N2 - Prozessmodelle spezifizieren die Verhaltensabhängigkeiten bezüglich der Ausführung sowohl zwischen Aktivitäten als auch zwischen Aktivitäten und Datenobjekten. Ein Datenobjekt wird über seine Zustände und Zustandsübergänge charakterisiert, welche in einem Objektlebenszyklus abgebildet werden. Für eine fehlerfreie Prozessausführung müssen alle Verhaltensabhängigkeiten korrekt modelliert werden. Eine Standardtechnik zur Korrektheitsüberprüfung ist das Überprüfen auf Soundness. Aktuelle Ansätze berücksichtigen allerdings nur den Kontrollfluss. Datenkorrektheit wird dagegen mittels Conformance zwischen einem Prozessmodel und den verwendeten Objektlebenszyklen überprüft, indem die Existenz eines Zustandsüberganges im Prozessmodell auch im Objektlebenszyklus möglich sein muss. Allerdings abstrahieren aktuelle Ansätze von Abhängigkeiten zwischen mehreren Datenobjekten und erfordern eine vollständige Prozessmodellspezifikation, d.h. das Überspringen oder Zusammenfassen von Zuständen beziehungsweise das Auslagern von Zustandsüberhängen in andere Prozessmodelle ist zum Beispiel nicht vorgesehen. In Prozessmodellsammlungen aus der Praxis sind allerdings oft solche unterspezifizierten Prozessmodelle vorhanden. In diesem Report adressieren wir diese Problemstellungen. Dazu führen wir das Konzept der synchronisierten Objektlebenszyklen ein, erweitern ein Mapping von Prozessmodellen zu Petri Netzen um Datenabhängigkeiten und wenden das Konzept der Weak Conformance auf Prozessmodelle an, um zu entscheiden ob immer wenn eine Aktivität auf ein Datenobjekt zugreift dieses auch im richtigen Zustand vorliegt. Dazu kann das Datenobjekt bereits in diesem Zustand sein oder aber diesen über eine beliebige Anzahl von Zustandsübergängen erreichen. Basierend auf diesen Konzepten führen wir auch einen Algorithmus ein, welcher ein integriertes Überprüfen von Kontrollfluss- und Datenflusskorrektheit unter Nutzung von Soundness-Überprüfungen ermöglicht. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 91 KW - business process management KW - data flow correctness KW - object life cycle synchronization KW - Petri net mapping KW - conformance checking KW - Geschäftsprozessmanagement KW - Datenflusskorrektheit KW - Objektlebenszyklus-Synchronisation KW - Petri net Mapping KW - Conformance Überprüfung Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-71722 SN - 978-3-86956-303-9 SN - 1613-5652 SN - 2191-1665 IS - 91 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Meyer, Harald A1 - Kuropka, Dominik T1 - Requirements for service composition N2 - 1 Introduction 2 Use case Scenario 3 General Composition Requirements 4 Functional Requirements of Service Composition 5 Non-Functional Requirements 6 Conclusion T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 11 Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-33096 SN - 978-3-937786-81-0 SN - 3-937786-81-3 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Neuhaus, Christian A1 - Polze, Andreas A1 - Chowdhuryy, Mohammad M. R. T1 - Survey on healthcare IT systems : standards, regulations and security N2 - IT systems for healthcare are a complex and exciting field. One the one hand, there is a vast number of improvements and work alleviations that computers can bring to everyday healthcare. Some ways of treatment, diagnoses and organisational tasks were even made possible by computer usage in the first place. On the other hand, there are many factors that encumber computer usage and make development of IT systems for healthcare a challenging, sometimes even frustrating task. These factors are not solely technology-related, but just as well social or economical conditions. This report describes some of the idiosyncrasies of IT systems in the healthcare domain, with a special focus on legal regulations, standards and security. N2 - IT Systeme für Medizin und Gesundheitswesen sind ein komplexes und spannendes Feld. Auf der einen Seite stehen eine Vielzahl an Verbesserungen und Arbeitserleichterungen, die Computer zum medizinischen Alltag beitragen können. Einige Behandlungen, Diagnoseverfahren und organisatorische Aufgaben wurden durch Computer überhaupt erst möglich. Auf der anderen Seite gibt es eine Vielzahl an Fakturen, die Computerbenutzung im Gesundheitswesen erschweren und ihre Entwicklung zu einer herausfordernden, sogar frustrierenden Aufgabe machen können. Diese Faktoren sind nicht ausschließlich technischer Natur, sondern auch auf soziale und ökonomische Gegebenheiten zurückzuführen. Dieser Report beschreibt einige Besondenderheiten von IT Systemen im Gesundheitswesen, mit speziellem Fokus auf gesetzliche Rahmenbedingungen, Standards und Sicherheit. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 45 KW - EPA KW - Elektronische Patientenakte KW - Sicherheit KW - Privacy KW - Standards KW - Gesetze KW - EHR KW - electronic health record KW - security KW - privacy KW - standards KW - law Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-51463 SN - 978-3-86956-128-8 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - BOOK A1 - Nienhaus, Marc A1 - Gooch, Bruce A1 - Döllner, Jürgen Roland Friedrich T1 - Visualizing movement dynamics in virtual urban environments N2 - Dynamics in urban environments encompasses complex processes and phenomena such as related to movement (e.g.,traffic, people) and development (e.g., construction, settlement). This paper presents novel methods for creating human-centric illustrative maps for visualizing the movement dynamics in virtual 3D environments. The methods allow a viewer to gain rapid insight into traffic density and flow. The illustrative maps represent vehicle behavior as light threads. Light threads are a familiar visual metaphor caused by moving light sources producing streaks in a long-exposure photograph. A vehicle’s front and rear lights produce light threads that convey its direction of motion as well as its velocity and acceleration. The accumulation of light threads allows a viewer to quickly perceive traffic flow and density. The light-thread technique is a key element to effective visualization systems for analytic reasoning, exploration, and monitoring of geospatial processes. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 17 Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-33065 SN - 978-3-939469-52-0 PB - Universitätsverlag Potsdam CY - Potsdam ER -