TY - THES A1 - Zupok, Arkadiusz T1 - The psbB-operon is a major locus for plastome-genome incompatibility in Oenothera Y1 - 2015 ER - TY - THES A1 - Zubaidah, Teti T1 - Spatio-temporal characteristics of the geomagnetic field over the Lombok Island, the Lesser Sunda Islands region : new geological, tectonic, and seismo-electromagnetic insights along the Sunda-Banda Arcs transition Y1 - 2010 CY - Potsdam ER - TY - THES A1 - Zubaidah, Teti T1 - Spatio-temporal characteristics of the geomagnetic field over the Lombok Island, the Lesser Sunda Islands region BT - new geological, tectonic, and seismo-electromagnetic insights along the Sunda-Banda Arcs transition T2 - Scientific Technical Report N2 - The Lombok Island is part of the Lesser Sunda Islands (LSI) region – Indonesia, situated along the Sunda-Banda Arcs transition. It lies between zones characterized by the highest intensity geomagnetic anomalies of this region, remarkable as one of the eight most important features provided on the 1st edition of World Digital Magnetic Anomaly Map. The seismicity of this region during the last years is high, while the geological and tectonic structures of this region are still not known in detail. Some local magnetic surveys have been conducted previously during 2004–2005. However, due to the lower accuracy of the used equipment and a limited number of stations, the qualities of the previous measurements are questionable for more interpretations. Thus a more detailed study to better characterize the geomagnetic anomaly -spatially and temporally- over this region and to deeply explore the related regional geology, tectonic and seismicity is needed. The intriguing geomagnetic anomalies over this island region vis-à-vis the socio-cultural situations lead to a study with a special aim to contribute to the assessment of the potential of natural hazards (earthquakes) as well as a new natural resource of energy (geothermal potential). This study is intended to discuss several crucial questions, including: i. The real values and the general pattern of magnetic anomalies over the island, as well as their relation to the regional one. ii. Any temporal changes of regional anomalies over the recent time. iii. The relationships between the anomalies and the geology and tectonic of this region, especially new insights that can be gained from the geomagnetic observations. iv. The relationships between the anomalies and the high seismicity of this region, especially some possible links between their variations to the earthquake occurrence. First, all available geomagnetic data of this region and results of the previous measurements are evaluated. The new geomagnetic surveys carried out in 2006 and 2007/2008 are then presented in detail, followed by the general description of data processing and data quality evaluation. The new results show the general pattern of contiguous negative-positive anomalies, revealing an active arc related subduction region. They agree with earlier results obtained by satellite, aeromagnetic, and marine platforms; and provide a much more detailed picture of the strong anomalies on this island. The temporal characteristics of regional anomalies show a decreasing strength of the dipolar structure, where decreasing of the field intensities is faster than the regional secular variations as defined by the global model (the 10th generation of IGRF). However, some exceptions (increasing of anomalies) have to be noted and further analyzed for several locations. Thereafter, simultaneous magnetic anomalies and gravity models are generated and interpreted in detail. Three profiles are investigated, providing new insights into the tectonics and geological evolution of the Lombok Island. Geological structure of this island can be divided as two main parts with different consecutive ages: an old part (from late Oligocene to late Miocene) in the South and a younger one (from Pliocene to Holocene) in the North. A new subduction in the back arc region (the Flores Thrust zone) is considered mature and active, showing a tendency of progressive subduction during 2005–2008. Geothermal potential in the northern part of this island can be mapped in more detail using these geomagnetic regional survey data. The earlier estimates of reservoir depth can be confirmed further to a depth of about 800 m. Evaluation of temporal changes of the anomalies gives some possible explanations related to the evolution of the back arc region, large stress accumulations over the LSI region, a specific electrical characteristic of the crust of the Lombok Island region, and a structural discontinuity over this island. Based on the results, several possible advanced studies involving geomagnetic data and anomaly investigations over the Lombok Island region can be suggested for the future: i. Monitoring the subduction activity of the back arc region (the Flores Thrust zone) and the accumulated stress over the LSI, that could contribute to middle term hazard assessment with a special attention to the earthquake occurrence in this region. Continuous geomagnetic field measurements from a geomagnetic observatory which can be established in the northern part of the Lombok Island and systematic measurements at several repeat stations can be useful in this regards. ii. Investigating the specific electrical characteristic (high conductivity) of the crust, that is probably related to some aquifer layers or metal mineralization. It needs other complementary geophysical methods, such as magnetotelluric (MT) or preferably DC resistivity measurements. iii. Determining the existence of an active structural fault over the Lombok Island, that could be related to long term hazard assessment over the LSI region. This needs an extension of geomagnetic investigations over the neighbouring islands (the Bali Island in the West and the Sumbawa Island in the East; probably also the Sumba and the Flores islands). This seems possible because the regional magnetic lineations might be used to delineate some structural discontinuities, based on the modelling of contrasts in crustal magnetizations. KW - geomagnetic KW - tectonic KW - seismo-electromagnetic KW - Lombok Y1 - 2010 U6 - https://doi.org/10.2312/GFZ.b103-10079 VL - STR10 IS - 07 PB - Deutsches GeoForschungsZentrum GFZ CY - Potsdam ER - TY - THES A1 - Zuba, Anna T1 - The role of weight stigma and weight bias internalization in psychological functioning among school-aged children Y1 - 2018 ER - TY - THES A1 - Zinck, Richard T1 - Diversity, criticality and disturbance in wildfire ecosystems Y1 - 2009 CY - Potsdam ER - TY - THES A1 - Zimmermann, Julia T1 - Population ecology of a dominant perennial grass : recruitment, growth and mortality in semi-arid savanna T2 - PhD dissertation / Helmholtz Centre for Environmental Research, UFZ Y1 - 2009 VL - 2009,4 PB - UFZ CY - Leipzig ER - TY - THES A1 - Zimmermann, Heike Hildegard T1 - Vegetation changes and treeline dynamics in northern Siberia since the last interglacial revealed by sedimentary ancient DNA metabarcoding and organelle genome assembly of modern larches Y1 - 2017 ER - TY - THES A1 - Zibulski, Romy T1 - Taxonomic composition and biochemical and isotopic characteristics of North-Siberian mosses and their application to the palaeoecological reconstruction of tundra polygon development Y1 - 2014 ER - TY - THES A1 - Zhu, Fangjun T1 - Gene evolution and expression patterns in the all-female fish Amazon molly: Poecilia formosa Y1 - 2016 ER - TY - THES A1 - Zhou, Xu T1 - Atmospheric interactions with land surface in the arctic based on regional climate model solutions Y1 - 2014 ER - TY - THES A1 - Zhou, Wei T1 - Access control model and policies for collaborative environments Y1 - 2008 CY - Potsdam ER - TY - THES A1 - Zhou, Shuo T1 - Biological evaluation and sulfation of polymer networks from glycerol glycidyl ether N2 - Cardiovascular diseases are the main cause of death worldwide, and their prevalence is expected to rise in the coming years. Polymer-based artificial replacements have been widely used for the treatment of cardiovascular diseases. Coagulation and thrombus formation on the interfaces between the materials and the human physiological environment are key issues leading to the failure of the medical device in clinical implantation. The surface properties of the materials have a strong influence on the protein adsorption and can direct the blood cell adhesion behavior on the interfaces. Furthermore, implant-associated infections will be induced by bacterial adhesion and subsequent biofilm formation at the implantation site. Thus, it is important to improve the hemocompatibility of an implant by altering the surface properties. One of the effective strategies is surface passivation to achieve protein/cell repelling ability to reduce the risk of thrombosis. This thesis consists of synthesis, functionalization, sterilization, and biological evaluation of bulk poly(glycerol glycidyl ether) (polyGGE), which is a highly crosslinked polyether-based polymer synthesized by cationic ring-opening polymerization. PolyGGE is hypothesized to be able to resist plasma protein adsorption and bacterial adhesion due to analogous chemical structure as polyethylene glycol and hyperbranched polyglycerol. Hydroxyl end groups of polyGGE provide possibilities to be functionalized with sulfates to mimic the anti-thrombogenic function of the endothelial glycocalyx. PolyGGE was synthesized by polymerization of the commercially available monomer glycerol glycidyl ether, which was characterized as a mixture of mono-, di- and tri-glycidyl ether. Cationic ring opening-polymerization of this monomer was carried out by ultraviolet (UV) initiation of the photo-initiator diphenyliodonium hexafluorophosphate. With the increased UV curing time, more epoxides in the side chains of the monomers participated in chemical crosslinking, resulting in an increase of Young’s modulus, while the value of elongation at break of polyGGE first increased due to the propagation of the polymer chains then decreased with the increase of crosslinking density. Eventually, the chain propagation can be effectively terminated by potassium hydroxide aqueous solution. PolyGGE exhibited different tensile properties in hydrated conditions at body temperature compared to the values in the dry state at room temperature. Both Young’s modulus and values of elongation at break were remarkably reduced when tested in water at 37 °C, which was above the glass transition temperature of polyGGE. At physiological conditions, entanglements of the ployGGE networks unfolded and the free volume of networks were replaced by water molecules as softener, which increased the mobility of the polymer chains, resulting in a lower Young’s modulus. Protein adsorption analysis was performed on polyGGE films with 30 min UV curing using an enzyme-linked immunosorbent assay. PolyGGE could effectively prevent the adsorption of human plasma fibrinogen, albumin, and fibronectin at the interface of human plasma and polyGGE films. The protein resistance of polyGGE was comparable to the negative controls: the hemocompatible polydimethylsiloxane (PDMS), showing its potential as a coating material for cardiovascular implants. Moreover, antimicrobial tests of bacterial activity using isothermal microcalorimetry and the microscopic image of direct bacteria culturing demonstrated that polyGGE could directly interfere biofilm formation and growth of both Gram-negative and antibiotic-resistant Gram-positive bacteria, indicating the potential application of polyGGE for combating the risk of hospital-acquired infections and preventing drug-resistant superbug spreading. To investigate its cell compatibility, polyGGE films were extracted by different solvents (ethanol, chloroform, acetone) and cell culture medium. Indirect cytotoxicity tests showed extracted polyGGE films still had toxic effects on L929 fibroblast cells. High-performance liquid chromatography/electrospray ionization mass spectrometry revealed the occurrence of organochlorine-containing compounds released during the polymer-cell culture medium interaction. A constant level of those organochlorine-containing compounds was confirmed from GGE monomer by a specific peak of C-Cl stretching in infrared spectra of GGE. This is assumed to be the main reason causing the increased cell membrane permeability and decreased metabolic activity, leading to cell death. Attempts as changing solvents were made to remove toxic substances, however, the release of these small molecules seems to be sluggish. The densely crosslinked polyGGE networks can possibly contribute to the trapping of organochlorine-containing compounds. These results provide valuable information for exploring the potentially toxic substances, leaching from polyGGE networks, and propose a feasible strategy for minimizing the cytotoxicity via reducing their crosslinking density. Sulfamic acid/ N-Methyl-2-pyrrolidone (NMP) were selected as the reagents for the sulfation of polyGGE surfaces. Fourier transform attenuated total reflection infrared spectroscopy (ATR-FT-IR) was used to monitor the functionalization kinetics and the results confirmed the successful sulfate grafting on the surface of polyGGE with the covalent bond -C-O-S-. X-ray photoelectron spectroscopy was used to determine the element composition on the surface and the cross-section of the functionalized polyGGE and sulfation within 15 min guarantees the sulfation only takes place on the surface while not occurring in the bulk of the polymer. The concentration of grafted sulfates increased with the increasing reaction time. The hydrophilicity of the surface of polyGGE was highly increased due to the increase of negatively charged end groups. Three sterilization techniques including autoclaving, gamma irradiation, and ethylene oxide (EtO) sterilization were used for polyGGE sulfates. Results from ATR-FT-IR and Toluidine Blue O quantitative assay demonstrated the total loss of the sulfates after autoclave sterilization, which was also confirmed by the increased water contact angle. Little influence on the concentration of sulfates was found for gamma-irradiated and autoclaving sterilized polyGGE sulfates. To investigate the thermal influence on polyGGE sulfates, one strategy was to use poly(hydroxyethyl acrylate) sulfates (PHEAS) for modeling. The thermogravimetric analysis profile of PHEAS demonstrated that sulfates are not thermally stable independent of the substrate materials and decomposition of sulfates occurs at around 100 °C. Although gamma irradiation also showed little negative effect on the sulfate content, the color change in the polyGGE sulfates indicates chemical or physical change might occur in the polymer. EtO sterilization was validated as the most suitable sterilization technique to maintain the chemical structure of polyGGE sulfates. In conclusion, the conducted work proved that bulk polyGGE can be used as an antifouling coating material and shows its antimicrobial potential. Sulfates functionalization can be effectively realized using sulfamic acid/NMP. EtO sterilization is the most suitable sterilization technique for grafted sulfates. Besides, this thesis also offers a good strategy for the analysis of toxic leachable substances using suitable physicochemical characterization techniques. Future work will focus on minimizing/eliminating the release of toxic substances via reducing the crosslinking density. Another interesting aspect is to study whether grafted sulfates can meet the need for anti-thrombogenicity. N2 - Herz-Kreislauf-Erkrankungen sind weltweit die Haupttodesursache, und es wird erwartet, dass ihre Prävalenz in den kommenden Jahren zunehmen wird. Künstlicher Ersatz auf Polymerbasis wird in großem Umfang für die Behandlung von Herz-Kreislauf-Erkrankungen eingesetzt. Gerinnung und Thrombenbildung an den Grenzflächen zwischen den Materialien und der menschlichen physiologischen Umgebung sind ein Hauptproblem, das zum Versagen des Medizinprodukts bei der klinischen Implantation führt. Die Oberflächeneigenschaften der Materialien haben einen starken Einfluss auf die Proteinadsorption und können das Adhäsionsverhalten von Blutzellen an den Grenzflächen steuern. Darüber hinaus werden Implantat-assoziierte Infektionen durch bakterielle Adhäsion und anschließende Biofilmbildung an der Implantationsstelle ausgelöst. Daher ist es wichtig, die Hämokompatibilität eines Implantats durch Veränderung der Oberflächeneigenschaften zu verbessern. Eine der wirksamen Strategien ist die Oberflächenpassivierung, um die Fähigkeit zur Protein-/Zellabweisung zu erreichen und so das Thromboserisiko zu verringern. Diese Arbeit befasst sich mit der Synthese, Funktionalisierung, Sterilisation und biologischen Bewertung von Poly(glycerin glycidyl ether) (polyGGE), einem stark vernetzten Polymer auf Polyetherbasis, das durch kationische Ringöffnungspolymerisation hergestellt wird. Es wird angenommen, dass PolyGGE aufgrund seiner ähnlichen chemischen Struktur wie Polyethylenglykol und hyperverzweigtes Polyglycerin der Adsorption von Plasmaproteinen und der Anhaftung von Bakterien widerstehen kann. Die Hydroxyl-Endgruppen von PolyGGE können mit Sulfaten funktionalisiert werden, um die antithrombogene Funktion der endothelialen Glykokalyx zu imitieren. PolyGGE wurde durch Polymerisation des kommerziell erhältlichen Monomers Glycerin Glycidyl ether synthetisiert, das als Mischung aus Mono-, Di- und Triglycidylether charakterisiert wurde. Die kationische Ringöffnungspolymerisation dieses Monomers wurde mit Hilfe des Photoinitiators Diphenyliodoniumhexafluorophosphat durch Ultraviolett (UV) ausgelöst. Mit zunehmender UV-Härtungszeit nahmen mehr Epoxide in den Seitenketten der Monomere an der chemischen Vernetzung teil, was zu einem Anstieg des Elastizitätsmoduls führte, während der Wert der Bruchdehnung von polyGGE zunächst aufgrund der Ausbreitung der Polymerketten anstieg und dann mit zunehmender Vernetzungsdichte abnahm. Schließlich kann die Kettenausbreitung durch wässrige Kaliumhydroxidlösung wirksam gestoppt werden. PolyGGE wies im hydratisierten Zustand bei Körpertemperatur andere Zugeigenschaften auf als im trockenen Zustand bei Raumtemperatur. Sowohl der Elastizitätsmodul als auch die Werte der Bruchdehnung waren deutlich reduziert, wenn sie in Wasser bei 37 °C getestet wurden, was oberhalb der Glasübergangstemperatur von PolyGGE lag. Unter physiologischen Bedingungen entfalteten sich die Verflechtungen der PolyGGE-Netzwerke und das freie Volumen der Netzwerke wurde durch Wassermoleküle als Weichmacher ersetzt, was die Mobilität der Polymerketten erhöhte und zu einem niedrigeren Elastizitätsmodul führte. Die Proteinadsorptionsanalyse wurde an PolyGGE-Filmen mit 30-minütiger UV-Härtung unter Verwendung eines Enzymimmunoassays durchgeführt. PolyGGE konnte die Adsorption von Fibrinogen, Albumin und Fibronektin aus menschlichem Plasma an der Grenzfläche zwischen menschlichem Plasma und PolyGGE-Filmen wirksam verhindern. Die Proteinresistenz von PolyGGE war vergleichbar mit den Negativkontrollen: dem hämokompatiblen Polydimethylsiloxan, was sein Potenzial als Beschichtungsmaterial für kardiovaskuläre Implantate zeigt. Darüber hinaus zeigten antimikrobielle Tests der bakteriellen Aktivität mittels isothermischer Mikrokalorimetrie und das mikroskopische Bild der direkten Bakterienkultur, dass PolyGGE die Biofilmbildung und das Wachstum sowohl von gramnegativen als auch von antibiotikaresistenten grampositiven Bakterien direkt stören kann, was auf die potenzielle Anwendung von PolyGGE zur Bekämpfung des Risikos von Krankenhausinfektionen und zur Verhinderung der Ausbreitung arzneimittelresistenter Superbugs hinweist. Um die Zellkompatibilität zu untersuchen, wurden polyGGE-Folien mit verschiedenen Lösungsmitteln (Ethanol, Chloroform, Aceton) und Zellkulturmedium extrahiert. Indirekte Zytotoxizitätstests zeigten, dass die extrahierten polyGGE-Filme immer noch eine toxische Wirkung auf L929-Fibroblastenzellen hatten. Die Hochleistungsflüssigkeitschromatographie/Elektrospray-Ionisations-Massenspektrometrie zeigte das Auftreten von chlororganischen Derivaten, die während der Interaktion zwischen Polymer und Zellkulturmedium freigesetzt wurden. Ein konstantes Niveau dieser chlororganischen Derivate wurde vom GGE-Monomer durch einen spezifischen C-Cl-Streckungspeak im Infrarotspektrum von GGE bestätigt. Es wird angenommen, dass dies der Hauptgrund für die erhöhte Permeabilität der Zellmembran und die verringerte Stoffwechselaktivität ist, was zum Zelltod führt. Es wurden Versuche unternommen, die Lösungsmittel zu wechseln, um die toxischen Substanzen zu entfernen, aber die Freisetzung dieser kleinen Moleküle scheint nur langsam zu erfolgen. Die dicht vernetzten polyGGE-Netzwerke können möglicherweise zum Einschluss chloridhaltiger Verbindungen beitragen. Diese Ergebnisse liefern wertvolle Informationen für die Erforschung potenzieller toxischer Substanzen, die aus PolyGGE-Netzwerken ausgewaschen werden, und schlagen eine praktikable Strategie zur Minimierung der Zytotoxizität durch Verringerung der Vernetzungsdichte vor. Als Reagenzien für die Sulfatierung von PolyGGE-Oberflächen wurden Sulfaminsäure und N-Methyl-2-Pyrrolidon (NMP) gewählt. Die Fourier-Transformations-Infrarotspektroskopie mit abgeschwächter Totalreflexion (ATR-FT-IR) wurde zur Überwachung der Funktionalisierungskinetik eingesetzt, und die Ergebnisse bestätigten die erfolgreiche Sulfatpfropfung auf der Oberfläche von PolyGGE mit der kovalenten Bindung -C-O-S-. Mit Hilfe der Röntgen-Photoelektronenspektroskopie wurde die Elementzusammensetzung auf der Oberfläche und der Querschnitt des funktionalisierten PolyGGE bestimmt, und die Sulfatierung innerhalb von 15 Minuten garantiert, dass die Sulfatierung nur auf der Oberfläche stattfindet, während sie in der Masse des Polymers nicht vorkommt. Die Konzentration der gepfropften Sulfate nahm mit zunehmender Reaktionszeit zu. Die Hydrophilie der Oberfläche von polyGGE wurde durch die Zunahme negativ geladener Endgruppen stark erhöht. Für die PolyGGE-Sulfate wurden drei Sterilisationstechniken verwendet: Autoklavieren, Gammastrahlenbestrahlung und Ethylenoxid (EtO)-Sterilisation. Die Ergebnisse der quantitativen ATR-FT-IR und Toluidinblau O-Untersuchung zeigten den vollständigen Verlust der Sulfate nach der Sterilisation im Autoklaven, was auch durch den erhöhten Wasserkontaktwinkel bestätigt wurde. Bei den mit Gammastrahlen und im Autoklaven sterilisierten PolyGGE-Sulfaten wurde nur ein geringer Einfluss auf die Sulfatkonzentration festgestellt. Um den thermischen Einfluss auf PolyGGE-Sulfate zu untersuchen, bestand eine Strategie darin, ein Poly(hydroxyethylacrylat)-Sulfat (PHEAS) für die Modellierung zu verwenden. Das Profil der thermogravimetrischen Analyse von PHEAS zeigte, dass Sulfate unabhängig von den Substratmaterialien thermisch nicht stabil sind und die Zersetzung der Sulfate bei etwa 100 °C stattfindet. Obwohl die Gammasterilisation ebenfalls kaum negative Auswirkungen auf den Sulfatgehalt hat, deutet die Farbveränderung der PolyGGE-Sulfate darauf hin, dass chemische oder physikalische Veränderungen im Polymer auftreten könnten. Die EtO-Sterilisation erwies sich als die am besten geeignete Sterilisationstechnik, um die chemische Struktur der PolyGGE-Sulfate zu erhalten. Zusammenfassend lässt sich sagen, dass die durchgeführte Arbeit bewiesen hat, dass PolyGGE als Antifouling-Beschichtungsmaterial verwendet werden kann und sein antimikrobielles Potenzial zeigt. Die Funktionalisierung der Sulfate kann mit Sulfaminsäure/NMP effektiv durchgeführt werden. Die EtO-Sterilisation ist die am besten geeignete Sterilisationstechnik für gepfropfte Sulfate. Darüber hinaus bietet diese Arbeit auch eine gute Strategie für die Analyse toxischer auslaugbarer Substanzen mit Hilfe geeigneter physikalisch-chemischer Charakterisierungstechniken. Zukünftige Arbeiten werden sich darauf konzentrieren, die Freisetzung toxischer Substanzen durch Verringerung der Vernetzungsdichte zu minimieren bzw. zu eliminieren. Ein weiterer interessanter Aspekt ist die Untersuchung, ob gepfropfte Sulfate den Anforderungen an die Anti-Thrombogenität gerecht werden können. KW - Sulfation KW - Antifouling KW - antimicrobial KW - Polyether Y1 - 2022 ER - TY - THES A1 - Zhou, Fei T1 - Optimization of foreign gene expression in plastids Y1 - 2008 ER - TY - THES A1 - Zhao, Yuhang T1 - Synthesis and surface functionalization on plasmonic nanoparticles for optical applications N2 - This thesis focuses on the synthesis of novel functional materials based on plasmonic nanoparticles. Three systems with targeted surface modification and functionalization have been designed and synthesized, involving modified perylenediimide doped silica-coated silver nanowires, polydopamine or TiO2 coated gold-palladium nanorods and thiolated poly(ethylene glycol) (PEG-SH)/dodecanethiol (DDT) modified silver nanospheres. Their possible applications as plasmonic resonators, chiral sensors as well as photo-catalysts have been studied. In addition, the interaction between silver nanospheres and 2,3,5,6-Tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ) molecules has also been investigated in detail. In the first part of the thesis, surface modification on Ag nanowires (NWs) with optimized silica coating through a modified Stöber method has been firstly conducted, employing sodium hydroxide (NaOH) to replace ammonia solution (NH4OH). The coated silver nanowires with a smooth silica shell have been investigated by single-particle dark-field scattering spectroscopy, transmission electron microscopy and electron-energy loss spectroscopy to characterize the morphologies and structural components. The silica-coated silver nanowires can be further functionalized with fluorescent molecules in the silica shell via a facile one-step coating method. The as-synthesized nanowire is further coupled with a gold nanosphere by spin-coating for the application of the sub-diffractional chiral sensor for the first time. The exciton-plasmon-photon interconversion in the system eases the signal detection in the perfectly matched 1D nanostructure and contributes to the high contrast of the subwavelength chiral sensing for the polarized light. In the second part of the thesis, dumbbell-shaped Au-Pd nanorods coated with a layer of polydopamine (PDA) or titanium dioxide (TiO2) have been constructed. The PDA- and TiO2- coated Au-Pd nanorods show a strong photothermal conversion performance under NIR illumination. Moreover, the catalytic performance of the particles has been investigated using the reduction of 4-nitrophenol (4-NP) as the model reaction. Under light irradiation, the PDA-coated Au-Pd nanorods exhibit a superior catalytic activity by increasing the reaction rate constant of 3 times. The Arrhenius-like behavior of the reaction with similar activation energies in the presence and absence of light irradiation indicates the photoheating effect to be the dominant mechanism of the reaction acceleration. Thus, we attribute the enhanced performance of the catalysis to the strong photothermal effect that is driven by the optical excitation of the gold surface plasmon as well as the synergy with the PDA layer. In the third part, the kinetic study on the adsorption of 2,3,5,6-Tetrafluoro-7,7,8,8-tetracyanoquino-dimethane (F4TCNQ) on the surface of Ag nanoparticles (Ag NPs) in chloroform has been reported in detail. Based on the results obtained from the UV-vis-NIR absorption spectroscopy, cryogenic transmission electron microscopy (cryo-TEM), scanning nano-beam electron diffraction (NBED) and electron energy loss spectroscopy (EELS), a two-step interaction kinetics has been proposed for the Ag NPs and F4TCNQ molecules. It includes the first step of electron transfer from Ag NPs to F4TCNQ indicated by the ionization of F4TCNQ, and the second step of the formation of Ag-F4TCNQ complex. The whole process has been followed via UV-vis-NIR absorption spectroscopy, which reveals distinct kinetics at two stages: the instantaneous ionization and the long-term complex formation. The kinetics and the influence of the molar ratio of Ag NPs/F4TCNQ molecules on the interaction between Ag NPs and F4TCNQ molecules in the organic solution are reported herein for the first time. Furthermore, the control experiment with silica-coated Ag NPs indicates that the charge transfer at the surface between Ag NPs and F4TCNQ molecules has been prohibited by a silica layer of 18 nm. KW - plasmonic nanoparticles KW - silica KW - polydopamine KW - TiO2 KW - chiral sensing KW - catalysis KW - surface interaction Y1 - 2021 ER - TY - THES A1 - Zhao, Xueru T1 - Palaeoclimate and palaeoenvironment evolution from the last glacial maximum into the early holocene (23-8 ka BP) derived from Lago Grande di Monticchio sediment record (S Italy) Y1 - 2021 ER - TY - THES A1 - Zhao, Liming T1 - Characterization genes involved in leaf development and senescence of arabidopsis Y1 - 2015 ER - TY - THES A1 - Zhao, Li T1 - Sustainable approaches towards novel nitrogen-doped carbonaceous structures Y1 - 2010 CY - Potsdam ER - TY - THES A1 - Zhang, Zhuodong T1 - A regional scale study of wind erosion in the Xilingele grassland based on computational fluid dynamics Y1 - 2011 CY - Potsdam ER - TY - THES A1 - Zhang, Youjun T1 - Investigation of the TCA cycle and glycolytic metabolons and their physiological impacts in plants Y1 - 2016 ER - TY - THES A1 - Zhang, Xiaorong T1 - Electrosynthesis and characterization of molecularly imprinted polymers for peptides and proteins Y1 - 2019 ER - TY - THES A1 - Zhang, Weiyi T1 - Functional Poly(ionic liquid) Materials based on Poly(1,2,4-triazolium)s Y1 - 2017 ER - TY - THES A1 - Zhang, Shuhao T1 - Synthesis and self-assembly of protein-polymer conjugates for the preparation of biocatalytically active membranes T1 - Synthese und Selbstassemblierung von Protein/Polymer-Konjugaten für die Herstellung einer biokatalytisch aktiven Membran N2 - This thesis covers the synthesis of conjugates of 2-Deoxy-D-ribose-5-phosphate aldolase (DERA) with suitable polymers and the subsequent immobilization of these conjugates in thin films via two different approaches. 2-Deoxy-D-ribose-5-phosphate aldolase (DERA) is a biocatalyst that is capable of converting acetaldehyde and a second aldehyde as acceptor into enantiomerically pure mono- and diyhydroxyaldehydes, which are important structural motifs in a number of pharmaceutically active compounds. Conjugation and immobilization renders the enzyme applicable for utilization in a continuously run biocatalytic process which avoids the common problem of product inhibition. Within this thesis, conjugates of DERA and poly(N-isopropylacrylamide) (PNIPAm) for immobilization via a self-assembly approach were synthesized and isolated, as well as conjugates with poly(N,N-dimethylacrylamide) (PDMAA) for a simplified and scalable spray-coating approach. For the DERA/PNIPAm-conjugates different synthesis routes were tested, including grafting-from and grafting-to, both being common methods for the conjugation. Furthermore, both lysines and cysteines were addressed for the conjugation in order to find optimum conjugation conditions. It turned out that conjugation via lysine causes severe activity loss as one lysine plays a key role in the catalyzing mechanism. The conjugation via the cysteines by a grafting-to approach using pyridyl disulfide (PDS) end-group functionalized polymers led to high conjugation efficiencies in the presence of polymer solubilizing NaSCN. The resulting conjugates maintained enzymatic activity and also gained high acetaldehyde tolerance which is necessary for their use later on in an industrial relevant process after their immobilization. The resulting DERA/PNIPAm conjugates exhibited enhanced interfacial activity at the air/water interface compared to the single components, which is an important pre-requisite for the immobilization via the self-assembly approach. Conjugates with longer polymer chains formed homogeneous films on silicon wafers and glass slides while the ones with short chains could only form isolated aggregates. On top of that, long chain conjugates showed better activity maintenance upon the immobilization. The crosslinking of conjugates, as well as their fixation on the support materials, are important for the mechanical stability of the films obtained from the self-assembly process. Therefore, in a second step, we introduced the UV-crosslinkable monomer DMMIBA to the PNIPAm polymers to be used for conjugation. The introduction of DMMIBA reduced the lower critical solution temperature (LCST) of the polymer and thus the water solubility at ambient conditions, resulting in lower conjugation efficiencies and in turn slightly poorer acetaldehyde tolerance of the resulting conjugates. Unlike the DERA/PNIPAm, the conjugates from the copolymer P(NIPAM-co-DMMIBA) formed continuous, homogenous films only after the crosslinking step via UV-treatment. For a firm binding of the crosslinked films, a functionalization protocol for the model support material cyclic olefin copolymer (COC) and the final target support, PAN based membranes, was developed that introduces analogue UV-reactive groups to the support surface. The conjugates immobilized on the modified COC films maintained enzymatic activity and showed good mechanical stability after several cycles of activity assessment. Conjugates with longer polymer chains, however, showed a higher degree of crosslinking after the UV-treatment leading to a pronounced loss of activity. A porous PAN membrane onto which the conjugates were immobilized as well, was finally transferred to a dead end filtration membrane module to catalyze the aldol reaction of the industrially relevant mixture of acetaldehyde and hexanal in a continuous mode. Mono aldol product was detectable, but yields were comparably low and the operational stability needs to be further improved Another approach towards immobilization of DERA conjugates that was followed, was to generate the conjugates in situ by simply mixing enzyme and polymer and spray coat the mixture onto the membrane support. Compared to the previous approach, the focus was more put on simplicity and a possible scalability of the immobilization. Conjugates were thus only generated in-situ and not further isolated and characterized. For the conjugation, PDMAA equipped with N-2-thiolactone acrylamide (TlaAm) side chains was used, an amine-reactive comonomer that can react with the lysine residues of DERA, as well as with amino groups introduced to a desired support surface. Furthermore disulfide formation after hydrolysis of the Tla groups causes a crosslinking effect. The synthesized copolymer poly(N,N-Dimethylacrylamide-co-N-2-thiolactone acrylamide) (P(DMAA-co-TlaAm)) thus serves a multiple purpose including protein binding, crosslinking and binding to support materials. The mixture of DERA and polymer could be immobilized on the PAN support by spray-coating under partial maintenance of enzymatic activity. To improve the acetaldehyde tolerance, the polymer in used was further equipped with cysteine reactive PDS end-groups that had been used for the conjugation as described in the first part of the thesis. The generated conjugates indeed showed good acetaldehyde tolerance and were thus used to be coated onto PAN membrane supports. Post treatment with a basic aqueous solution of H2O2 was supposed to further crosslink the spray-coated film hydrolysis and oxidation of the thiolactone groups. However, a washing off of the material was observed. Optimization is thus still necessary. N2 - Die vorliegende Arbeit beschreibt die Synthese von Konjugaten aus 2-Deoxy-D-ribose-5-phosphat aldolase (DERA) und geeigneten Polymeren sowie deren nachfolgende Immobilisierung in dünnen Filmen mittels zwei verschiedener Herangehensweisen. DERA ist ein Biokatalysator, der in der Lage ist, Acetaldehyd mit einem weiteren Aldehyd zu enantiomerenreinen Mono- und Dihydroxyaldehyden zu verknüpfen. Diese Verbindungen sind wichtige Strukturmotive für eine Reihe von pharmazeutisch aktiven Verbindungen. Konjugation und Immobilisierung machen das Enzym nutzbar für den Einsatz in einem kontinuierlich betriebenen, biokatalytischen Prozess, welcher das bekannte Problem der Produktinhibierung umgeht. In der vorliegenden Arbeit wurden einerseits Konjugate aus DERA und Poly(N-isopropylacrylamid) (PNIPAm) für die Immobilisierung mittels eines Selbstassemblierungsverfahrens synthetisiert und isoliert, sowie andererseits entsprechende Konjugate mit Poly(N,N-dimethylacrylamid) (PDMAA) für ein vereinfachtes und skalierbares Immobilisierungsverfahren mittels Sprühauftrag hergestellt. Für die DERA/PNIPAm-Konjugate wurden verschiedene Syntheserouten getestet, einschließlich grafting-from und grafting-to. Beide Methoden werden standardmäßig für entsprechende Konjugationen eingesetzt. Weiterhin wurden sowohl die Lysine als auch die Cysteine des Enzyms für die Konjugation herangezogen, um optimale Konjugationsbedingungen zu finden. Konjugation über die Lysine verursachte deutliche Aktivitätsverluste, da ein Lysin auch die Schlüsselrolle im katalytischen Mechanismus des Enzyms spielt. Die Konjugation über die Cysteine sowie einen grafting-to-Ansatz unter Nutzung eines entsprechenden Polymers mit cysteinreaktiver Pyridyldisulfid-Endgruppe (PDS) führte zu einer hohen Konjugationseffizienz, sofern polymersolubilisierendes NaSCN eingesetzt wurde. Die resultierenden Konjugate behielten ihre enzymatische Aktivität bei deutlich gesteigerter Toleranz gegenüber Acetaldehyd. Beide Aspekte sind wichtig für den Einsatz des Enzyms in einem industriell relevanten Prozess nach dem Immobilisierungsschritt. Die DERA/PNIPAm-Konjugate zeigten eine erhöhte Oberflächenaktivität im Vergleich zu den Einzelkomponenten, was eine wichtige Voraussetzung für die Immobilisierung über eine Selbstassemblierung darstellt. Konjugate mit relativ langen Polymerketten bildeten nach dem Selbstassemblierungsschritt homogene Filme auf Silizium-Wafern und Glass-Objektträgern während Konjugate mit kurzen Ketten nur isolierte Aggregate bildeten. Darüber hinaus zeigten die Konjugate mit längeren Ketten einen besseren Erhalt der Enzymaktivität im Zuge der Immobilisierung. Die nachträgliche Vernetzung der Konjugate, sowie ihre feste Anbindung an die Trägermaterialien sind wichtige Voraussetzungen für die mechanische Stabilität des aus dem Selbstassemblierungsschritt erhaltenen Films. Aus diesem Grund wurde in einem zweiten Schritt das UV-vernetzbare Monomer DMMIBA in das für die Konjugation vorgesehene, PNIPAm-basierte Polymer eingeführt. Die Einbindung von DMMIBA setzte die untere kritische Lösungstemperatur (LCST) und damit die Löslichkeit des Polymers in Wasser bei Raumtemperatur herab. Dies führte zu niedrigeren Konjugationseffizienzen und damit zu einer etwas schlechteren Acetaldehydtoleranz der resultierenden Konjugate. Anders als im Fall von DERA/PNIPAm, bildeten die mit P(NIPAM-co-DMMIBA) synthetisierten Konjugate einen homogenen Film nur nach Vernetzung mittels UV-Behandlung aus. Für eine feste Anbindung des vernetzten Films wurde ein Funktionalisierungsprotokoll für das Modell-Trägermaterial aus cycloolefinischem Copolymer (COC) und das letztliche Zielmaterial, PAN-basierte Membranen, entwickelt, welches analoge UV-reaktive Gruppen auf der Trägeroberfläche erzeugt. Die auf COC immobilisierten Konjugate bewahrten ihre Enzymaktivität und zeigten eine gute mechanische Stabilität nach mehreren Aktivitäts-Messzyklen. Der Einsatz von Konjugaten mit längeren Polymerketten führte jedoch zu Filmen mit zu hohem Vernetzungsgrad was einen deutlichen Aktivitätsverlust bedingte. Eine poröse, PAN-basierte Membran, auf welcher die Konjugate ebenso immobilisiert wurden, wurde schlussendlich in ein Dead-End-Filtrationsmodul überführt, um die Aldolreaktion eines industriell relevanten Gemisches aus Acetaldehyd und Hexanal in einem kontinuierlich betriebenen Verfahren durchzuführen. Es konnte Monoaldolprodukt detektiert werden, jedoch waren die Ausbeuten vergleichsweise niedrig, während sich die operative Stabilität als verbesserungswürdig erwies. Ein weiterer Immobilisierungsansatz für DERA-Konjugate, beinhaltete die in-situ-Generierung der Konjugate durch einfaches Vermischen von Enzym und Polymer gefolgt von unmittelbaren Auftrag des Materials auf ein Membranträgermaterial mittels Sprühen. Im Vergleich zum ersten Ansatz lag der Fokus hier mehr auf der Einfachheit und prinzipiellen Skalierbarkeit der Immobilisierung. Daher wurden die Konjugate hier nur in-situ erzeugt und nicht weiter isoliert sowie charakterisiert. Für die Konjugation wurde PDMAA herangezogen, welches mit Thiolactongruppen entlang der Seitenkette ausgerüstet ist. Die Thiolactongruppen sind reaktiv gegenüber Aminen und können daher sowohl mit den Lysineinheiten der DERA reagieren als auch mit Aminogruppen, die im Vorfeld auf dem Trägermaterial erzeugt wurden. Darüber hinaus können durch Hydrolyse der Thiolactoneinheiten sowie anschließender Ausbildung von Disulfidbrücken Vernetzungspunkte erzeugt werden. Das hergestellte Copolymer poly(N,N-Dimethylacrylamide-co-N-2-thiolactone acrylamide) (P(DMAA-co-TlaAm) übernimmt daher mehrere Aufgaben einschließlich Proteinbindung, Vernetzung und Anbindung an das Trägermaterial. Mischungen aus DERA und Polymer konnten durch Sprühauftrag auf funktionalisierten PAN-Trägermaterialien unter teilweisem Erhalt der Enzymaktivität immobilisiert werden. Um auch hier die Acetaldehydtoleranz zu verbessern, wurde das Polymer in einem zweiten Schritt wieder mit PDS-Endgruppen ausgerüstet, die schon zuvor im ersten Teil der Arbeit für die Konjugatsynthese mittels grafting-to herangezogen wurden. Die hergestellten Konjugate zeigten eine gute Acetaldehydtoleranz und wurden daher verwendet, um PAN-Membranen zu beschichten. Eine Nachbehandlung mittels einer basischen Wasserstoffperoxidlösung sollte den aufgesprühten Film vernetzen. Im Ergebnis wurde jedoch ein großer Teil des aufgebrachten Materials im Zuge dieses Schritts heruntergewaschen. Eine weitere Optimierung dieses Schritts ist daher noch notwendig. KW - 2-deoxy-D-ribose-5-phoshphate aldolase KW - enzyme immobilization KW - enzymatically active membrane KW - enzyme/polymer conjugate KW - self-assembly Y1 - 2019 ER - TY - THES A1 - Zhang, Quanchao T1 - Shape-memory properties of polymeric micro-scale objects prepared by electrospinning and electrospraying N2 - The ongoing trend of miniaturizing multifunctional devices, especially for minimally-invasive medical or sensor applications demands new strategies for designing the required functional polymeric micro-components or micro-devices. Here, polymers, which are capable of active movement, when an external stimulus is applied (e.g. shape-memory polymers), are intensively discussed as promising material candidates for realization of multifunctional micro-components. In this context further research activities are needed to gain a better knowledge about the underlying working principles for functionalization of polymeric micro-scale objects with a shape-memory effect. First reports about electrospun solid microfiber scaffolds, demonstrated a much more pronounced shape-memory effect than their bulk counterparts, indicating the high potential of electrospun micro-objects. Based on these initial findings this thesis was aimed at exploring whether the alteration of the geometry of micro-scale electrospun polymeric objects can serve as suitable parameter to tailor their shape-memory properties. The central hypothesis was that different geometries should result in different degrees of macromolecular chain orientation in the polymeric micro-scale objects, which will influence their mechanical properties as well as thermally-induced shape-memory function. As electrospun micro-scale objects, microfiber scaffolds composed of hollow microfibers with different wall thickness and electrosprayed microparticles as well as their magneto-sensitive nanocomposites all prepared from the same polymer exhibiting pronounced bulk shape-memory properties were investigated. For this work a thermoplastic multiblock copolymer, named PDC, with excellent bulk shape-memory properties, associated with crystallizable oligo(ε-caprolactone) (OCL) switching domains, was chosen for the preparation of electrospun micro-scale objects, while crystallizable oligo(p-dioxanone) (OPDO) segments serve as hard domains in PDC. In the first part of the thesis microfiber scaffolds with different microfiber geometries (solid or hollow with different wall thickness) were discussed. Hollow microfiber based PDC scaffolds were prepared by coaxial electrospinning from a 1, 1, 1, 3, 3, 3 hexafluoro-2-propanol (HFP) solution with a polymer concentration of 13% w·v-1. Here as a first step core-shell fiber scaffolds consisting of microfibers with a PDC shell and sacrificial poly(ethylene glycol) (PEG) core are generated. The hollow PDC microfibers were achieved after dissolving the PEG core with water. The utilization of a fixed electrospinning setup and the same polymer concentration of the PDC spinning solution could ensure the fabrication of microfibers with almost identical outer diameters of 1.4 ± 0.3 µm as determined by scanning electron microscopy (SEM). Different hollow microfiber wall thicknesses of 0.5 ± 0.2 and 0.3 ± 0.2 µm (analyzed by SEM) have been realized by variation of the mass flow rate, while solid microfibers were obtained by coaxial electrospinning without supplying any core solution. Differential scanning calorimetry experiments and tensile tests at ambient temperature revealed an increase in degree of OCL crystallinity form χc,OCL = 34 ± 1% to 43 ± 1% and a decrease in elongation of break from 800 ± 40% to 200 ± 50% associated with an increase in Young´s modulus and failture stress for PDC hollow microfiber scaffolds when compared with soild fibers. The observed effects were enhanced with decreasing wall thickness of the single hollow fibers. The shape-memory properties of the electrospun PDC scaffolds were quantified by cyclic, thermomechanical tensile tests. Here, scaffolds comprising hollow microfibers exhibited lower shape fixity ratios around Rf = 82 ± 1% and higher shape recovery ratios of Rr = 67 ± 1% associated to more pronounced relaxation at constant strain during the first test cycle and a lower switching temperature of Tsw = 33 ± 1 °C than the fibrous meshes consisting of solid microfibers. These findings strongly support the central hypothesis that different fiber geometries (solid or hollow with different wall thickness) in electrospun scaffolds result in different degrees of macromolecular chain orientation in the polymeric micro-scale objects, which can be applied as design parameter for tailoring their mechanical and shape-memory properties. The second part of the thesis deals with electrosprayed particulate PDC micro-scale objects. Almost spherical PDC microparticles with diameters of 3.9 ± 0.9 μm (as determined by SEM) were achieved by electrospraying of HFP solution with a polymer concentration of 2% w·v-1. In contrast, smaller particles with sizes of 400 ± 100 nm or 1.2 ± 0.3 μm were obtained for the magneto-sensitive composite PDC microparticles containing 23 ± 0.5 wt% superparamagnetic magnetite nanoparticles (mNPs). All prepared PDC microparticles exhibited a similar overall crystallinity like the PDC bulk material as analyzed by DSC. AFM nanoindentation results revealed no influence of the nanofiller incorporation on the local mechanical properties represented by the reduced modulus determined for pure PDC microparticles and magneto-sensitive composite PDC microparticles with similar diameters around 1.3 µm. It was found that the reduced modulus of the nanocomposite microparticles increased substantially with decreasing particles size from 2.4 ± 0.9 GPa (1.2 µm) to 11.9 ± 3.1 GPa (0.4 µm), which can be related to a higher orientation of the macromolecules at the surface of smaller sized microparticles. The magneto-sensitivity of such nanocomposite microparticles could be demonstrated in two aspects. One was by attracting/collecting the composite micro-objects with an external permanent magnet. The other one was by a inductive heating to 44 ± 1 °C, which is well above the melting transition of the OCL switching domains, when compacted to a 10 x 10 mm2 film with a thickness of 10 µm and exposed to an alternating magnet field with an magnetic field strength of 30 kA·m-1. Both functions are of great relevance for designing next generation drug delivery systems combining targeting and on demand release. By a compression approach shape-memory functionalization of individual microparticles could be realized. Here different programming pressures and compression temperatures were applied. The shape-recovery capability of the programmed PDC microparticles was quantified by online and off-line heating experiments analyzed via microscopy measurement. The obtained shape-memory properties were found to be strongly depending on the applied programming pressure and temperature. The best shape-memory performance with a high shape recovery rate of about Rr = 80±1% was obtained when a low pressure of 0.2 MPa was applied at 55 °C. Finally, it was demonstrated that PDC microparticles can be utilized as micro building parts for preparation of a macroscopic film with temporary stability by compression of a densely packed array of PDC microparticles at 60 °C followed by subsequent cooling to ambient temperature. This film disintegrates into individual microparticles upon heating to 60 °C. Based on this technology the design of stable macroscopic release systems can be envisioned, which can be easily fixed at the site of treatment (i.e. by suturing) and disintegrate on demand to microparticles facilitating the drug release. In summary, the results of this thesis could confirm the central hypothesis that the variation of the geometry of polymeric micro-objects is a suitable parameter to adjust their shape-memory performance by changing the degree of macromolecular chain orientation in the specimens or by enabling new functions like on demand disintegration. These fundamental findings might be relevant for designing novel miniaturized multifunctional polymer-based devices. KW - shape-memory effect KW - microparticles KW - hollow microfibers KW - geometry Y1 - 2018 ER - TY - THES A1 - Zhang, Heshou T1 - Magnetic fields in the universe BT - Diagnostics, turbulent properties, and their implications N2 - The galactic interstellar medium is magnetized and turbulent. The magnetic field and turbulence play important roles in many astrophysical mechanisms, including cosmic ray transport, star formation, etc. Therefore, measurements of magnetic field and turbulence information are crucial for the proper interpretation of astronomical observations. Nonetheless, the magnetic field observation is quite challenging, especially, there is not universal magnetic tracer for diffuse medium. Moreover, the modelling of turbulence can be oversimplified due to the lack of observational tools to diagnose the plasma properties of the turbulence in the galactic interstellar medium. The studies presented in this thesis have addressed these challenges by bridging the theoretical studies of magnetic field and turbulence with numerical simulations and observations. The following research are presented in this thesis. The first observational evidence of the novel magnetic tracer, ground state alignment (GSA), is discovered, revealing the three-dimensional magnetic field as well as 2 orders of magnitude higher precision comparing to previous observational study in the stellar atmosphere of the post-AGB 89 Herculis. Moreover, the application of GSA in the sub-millimeter fine-structure lines is comprehensively studied for different elements and with magnetohydrodynamic simulations. Furthermore, the influence of GSA effect on the spectroscopy is analyzed and it is found that measurable variation will be produced on the spectral line intensity and the line ratio without accounting for the optical pumping process or magnetic field. Additionally, a novel method to measure plasma modes in the interstellar medium, Signatures from Polarization Analysis (SPA), is proposed and applied to real observations. Magneto-sonic modes are discovered in different types of interstellar medium. An explanation is provided for the long-standing mystery, the origin of γ-ray enhanced emission “Cygnus Cocoon”, based on the comparison between the outcome of SPA and multi-waveband observational data. These novel methods have strong potentials for broader observational applications and will play crucial roles in future multi-wavelength astronomy. N2 - Das interstellare Medium ist magnetisiert und turbulent. Das Magnetfeld und die Turbulenz spielen eine wichtige Rolle in vielen astrophysikalischen Prozessen, unter anderem beim Transport kosmischer Strahlung, bei der Entstehung von Sternen usw. Daher sind Messungen des Magnetfelds und der Turbulenz entscheidend bei der korrekten Interpretation astronomischer Beobachtungen. Dennoch ist die Messung des astronomischen Magnetfeldes eine große Herausforderung, besonders da es keinen universellen magnetischen Tracer für diffuse Medien gibt. Außerdem kann es aufgrund des Mangels an geeigneten Beobachtungswerkzeugen für die Plasmaeigenschaften der galaktischen Turbulenz zu übermäßigen Vereinfachungen bei der Turbulenzmodellierung kommen. Die in dieser Arbeit vorgestellten Forschungsergebnisse beschäftigen sich mit diesen Herausforderungen; die Theorien des Magnetfeldes und der Turbulenz werden durch numerische Simulationen und Beobachtungen anwendbar gemacht. Die erste Anwendung eines neuen magnetischen Markers, Ground State Alignment (GSA, deutsch „Grundzustandsausrichtung“), wird vorgestellt. Dabei wird das dreidimensionale Magnetfeld in der Analyse von Beobachtungsdaten aus der stellaren Atmosphäre des post-AGB 89 Herculis um zwei Größenordnungen genauer bestimmt als bei den bisherigen Methoden. Zusätzlich wird die Anwendung von GSA bei der Analyse von sub-millimeter Feinstrukturlinien ausführlich für verschiedene Elemente mit Hilfe von magnetohydrodynamischen Simulationen getestet. Auch der Einfluss von GSA-Effekten auf spektroskopische Analysen wird untersucht; dabei stellt sich heraus, dass messbare Variationen in der Linienbreite und im Verhältnis der Linien verursacht werden, ohne dass optische Pumpprozesse oder das Magnetfeld berücksichtigt werden. Des Weiteren wird die Signatures from Polarization Analysis (SPA, deutsch „Signatur-aus-Polarisationsanalyse“) als neue Messmethode für Plasmamoden im galaktischen Medium vorgestellt und auf reale Beobachtungen angewandt. In verschiedenen galaktischen Medien werden magneto-akustische Moden gefunden. Durch den Vergleich von Ergebnissen der SPA mit Beobachtungsdaten aus verschiedenen elektromagnetischen Frequenzbereichen kann die bisher ungeklärte Herkunft der gammastrahlenverstärkten Emission „Cygnus Cocoon“ erklärt werden. Diese neuen Methoden haben das Potential für eine breitere Anwendung bei der Analyse von Beobachtungen und werden in der Zukunft eine wichtige Rolle in der Multiwellenlängen-Astronomie spielen. KW - magnetic field KW - turbulence KW - polarization KW - interstellar medium KW - cosmic ray propagation Y1 - 2021 ER - TY - THES A1 - Zhang, Gong T1 - Transient ribosomal attenuation as a generic mechanism to coordinate protein biosynthesis and biogenesis Y1 - 2009 CY - Potsdam ER - TY - THES A1 - Zeng, Ting T1 - Nanoparticles promoted biocatalysis BT - Electrochemical investigation of human sulfite oxidase on nanoparticles modified electrodes Y1 - 2017 ER - TY - THES A1 - Zeller, Carolin T1 - Self-regulation and labour standards : an exemplary study investigating the emergence and strenghening of self- regulation regimes in the apparel industry Y1 - 2012 SN - 978-3-631-62433-3 PB - Lang Peter GmbH Internationaler Verlag der Wissenschaften CY - Frankfurt ER - TY - THES A1 - Zbierzak, Anna Maria T1 - Isolation and characterization of the chilling sensitive 1 gene from Arabidopsis Y1 - 2009 CY - Potsdam ER - TY - THES A1 - Zauber, Henrik T1 - A systems biology driven approach for analyzing lipid protein interactions in sterol biosynthesis mutants Y1 - 2013 CY - Potsdam ER - TY - THES A1 - Zarezadeh, Aliakbar T1 - Distributed smart cameras : architecture and communication protocols Y1 - 2012 CY - Potsdam ER - TY - THES A1 - Zakrzewski, Tanja T1 - Identity and violence in early modern Granada BT - Conversos and Moriscos T2 - Lexington studies in modern Jewish history, historiography, and memory Y1 - 2023 SN - 978-1-66691-534-1 PB - Lexington Books CY - Lanham ER - TY - THES A1 - Zakharova, Anna T1 - Bifurcations in deterministic and stochastic systems and applications to biology Y1 - 2012 CY - Potsdam ER - TY - THES A1 - Zadorozhnyi, Oleksandr T1 - Contributions to the theoretical analysis of the algorithms with adversarial and dependent data N2 - In this work I present the concentration inequalities of Bernstein's type for the norms of Banach-valued random sums under a general functional weak-dependency assumption (the so-called $\cC-$mixing). The latter is then used to prove, in the asymptotic framework, excess risk upper bounds of the regularised Hilbert valued statistical learning rules under the τ-mixing assumption on the underlying training sample. These results (of the batch statistical setting) are then supplemented with the regret analysis over the classes of Sobolev balls of the type of kernel ridge regression algorithm in the setting of online nonparametric regression with arbitrary data sequences. Here, in particular, a question of robustness of the kernel-based forecaster is investigated. Afterwards, in the framework of sequential learning, the multi-armed bandit problem under $\cC-$mixing assumption on the arm's outputs is considered and the complete regret analysis of a version of Improved UCB algorithm is given. Lastly, probabilistic inequalities of the first part are extended to the case of deviations (both of Azuma-Hoeffding's and of Burkholder's type) to the partial sums of real-valued weakly dependent random fields (under the type of projective dependence condition). KW - Machine learning KW - nonparametric regression KW - kernel methods KW - regularisation KW - concentration inequalities KW - learning rates KW - sequential learning KW - multi-armed bandits KW - Sobolev spaces Y1 - 2021 ER - TY - THES A1 - Zaccarella, Emiliano T1 - Breaking down complexity BT - the neural basis of the syntactic merge mechanism in the human brain T2 - MPI series human cognitive and brain sciences ; 175 N2 - The unbounded expressive capacity of human language cannot boil down to an infinite list of sentences stored in a finite brain. Our linguistic knowledge is rather grounded around a rule-based universal syntactic computation—called Merge—which takes categorized units in input (e.g. this and ship), and generates structures by binding words recursively into more complex hierarchies of any length (e.g. this ship; this ship sinks…). Here we present data from different fMRI datasets probing the cortical implementation of this fundamental process. We first pushed complexity down to a three-word level, to explore how Merge creates minimally hierarchical phrases and sentences. We then moved to the most fundamental two-word level, to directly assess the universal invariant nature of Merge, when no additive mechanisms are involved. Our most general finding is that Merge as the basic syntactic operation is primarily performed by confined area, namely BA 44 in the IFG. Activity reduces to its most ventral-anterior portion at the most fundamental level, following fine-grained sub-anatomical parcellation proposed for the region. The deep frontal operculum/anterior-dorsal insula (FOP/adINS), a phylogenetically older and less specialized region, rather appears to support word-accumulation processing in which the categorical information of the word is first accessed based on its lexical status, and then maintained on hold before further processing takes place. The present data confirm the general notion of BA 44 being activated as a function of complex structural hierarchy, but they go beyond this view by proposing that structural sensitivity in BA 44 is already appreciated at the lowest levels of complexity during which minimal phrase-structures are build up, and syntactic Merge is assessed. Further, they call for a redefinition of BA 44 from multimodal area to a macro-region with internal localizable functional profiles Y1 - 2015 SN - 978-3-941504-60-8 PB - Max-Planck-Institute CY - Leipzig ER - TY - THES A1 - Yue, Xiuli T1 - Monolayer phase behavior of bipolar amphiphiles and their coupling with DNA Y1 - 2004 CY - Golm ER - TY - THES A1 - Yu, Linghui T1 - Hydrothermal synthesis of carbon and carbon nanocomposite materials for environmental and energy applications Y1 - 2013 CY - Potsdam ER - TY - THES A1 - You, Zewang T1 - Conformational transition of peptide-functionalized cryogels enabling shape-memory capability Y1 - 2017 ER - TY - THES A1 - You, Lili T1 - Chloroplast engineering for recombinant protein production and stress protection Y1 - 2024 ER - TY - THES A1 - You, Liangchen T1 - Synthesis and characterization of novel glycopolymers Y1 - 2007 CY - Potsdam ER - TY - THES A1 - Yishai, Oren T1 - Engineering the reductive glycine pathway in Escherichia coli Y1 - 2019 ER - TY - THES A1 - Yin, Jian T1 - Syntheses and transformations of 2-C-Malonyl substituted carbohydrates Y1 - 2009 CY - Potsdam ER - TY - THES A1 - Yilmaz Wörfel, Seda T1 - Adverbial Relations in Turkish-German Bilingualism T2 - Mehrsprachigkeit = Multilingualism N2 - The Turkish language in diaspora is in process of change due to different language constellations of immigrants and the dominance of majority languages. This led to a great interest in various research areas, particularly in linguistics. Against this background, this study focuses on developmental change in the use of adverbial clause-combining constructions in Turkish-German bilingual students’ oral and written text production. It illustrates the use of non-finite constructions and some unique alternative strategies to express adverbial relations with authentic examples in Turkish and German. The findings contribute to a better understanding of how bilingual competencies vary in expressing adverbial relations depending on language contact and extra-linguistic factors. Y1 - 2022 SN - 978-3-8309-4542-0 SN - 978-3-8309-9542-5 SN - 1433-0792 IS - 53 PB - Waxmann CY - Münster ER - TY - THES A1 - Yazdanbakhsh, Nima T1 - Development of a robotized image processing platform to decipher root elongation kinetics in a. thaliana and investigating the role of carbohydrates and the circadian clock genes in detected diurnal patterns Y1 - 2009 CY - Potsdam ER - TY - THES A1 - Yarman, Aysu T1 - Biomimetic sensors for substrates of peroxidases and cytochrome P450s Y1 - 2012 CY - Potsdam ER - TY - THES A1 - Yang, Lei T1 - Verification of systemic mRNAs mobility and mobile functions Y1 - 2017 ER - TY - THES A1 - Yang, Haojin T1 - Automatic video indexing and retrieval using video ocr technology Y1 - 2013 CY - Potsdam ER - TY - THES A1 - Yan, Wan T1 - Shape-Memory effects of thermoplatic multiblock copolymers with overlapping thermal transitions Y1 - 2021 ER - TY - THES A1 - Yagci, Yavuz Emre T1 - Synthesis of poly(tartar amide)s and poly-(gluco amide)s as antifreeze additives Y1 - 2008 CY - Potsdam ER - TY - THES A1 - Yagci, Yavuz Emre T1 - Synthesis of poly(tartar amide)s and poly-(gluco amide)s as antifreeze additives Y1 - 2008 CY - Potsdam ER - TY - THES A1 - Yadav, Umesh Prasad T1 - Sucrose and trehalose-6-phosphate signalling in "Arabidopsis thaliana" Y1 - 2009 CY - Potsdam ER -