TY - GEN A1 - Zeeden, Christian A1 - Obreht, Igor A1 - Veres, Daniel A1 - Kaboth-Bahr, Stefanie A1 - Hošek, Jan A1 - Marković, Slobodan B. A1 - Bösken, Janina A1 - Lehmkuhl, Frank A1 - Rolf, Christian A1 - Hambach, Ulrich T1 - Smoothed millennial-scale palaeoclimatic reference data as unconventional comparison targets: Application to European loess records T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Millennial-scale palaeoclimate variability has been documented in various terrestrial and marine palaeoclimate proxy records throughout the Northern Hemisphere for the last glacial cycle. Its clear expression and rapid shifts between different states of climate (Greenland Interstadials and Stadials) represents a correlation tool beyond the resolution of e.g. luminescence dating, especially relevant for terrestrial deposits. Usually, comparison of terrestrial proxy datasets and the Greenland ice cores indicates a complex expression of millennial-scale climate variability as recorded in terrestrial geoarchives including loess. Loess is the most widespread terrestrial geoarchive of the Quaternary and especially widespread over Eurasia. However, loess often records a smoothed representation of millennial-scale variability without all fidelity when compared to the Greenland data, this being a relevant limiting feature in integrating loess with other palaeoclimate records. To better understand the loess proxy-response to millennial-scale climate variability, we simulate a proxy signal smoothing by natural processes through application of low-pass filters of delta O-18 data from Greenland, a high-resolution palaeoclimate reference record, alongside speleothem isotope records from the Black Sea-Mediterranean region. We show that low-pass filters represent rather simple models for better constraining the expression of millennial-scale climate variability in low sedimentation environments, and in sediments where proxy-response signals are most likely affected by natural smoothing (by e.g. bioturbation). Interestingly, smoothed datasets from Greenland and the Black Sea-Mediterranean region are most similar in the last similar to 15 ka and between similar to 50-30 ka. Between similar to 30-15 ka, roughly corresponding to the Last Glacial Maximum and the deglaciation, the records show dissimilarities, challenging the construction of robust correlative time-scales in this age range. From our analysis it becomes apparent that patterns of palaeoclimate signals in loess-palaeosol sequences often might be better explained by smoothed Greenland reference data than the original high-resolution Greenland dataset, or other reference data. This opens the possibility to better assess the temporal resolution and palaeoclimate potential of loess-palaeosol sequences in recording supra-regional climate patterns, as well as to securely integrate loess with other chronologically better-resolved palaeoclimate records. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1187 KW - last glacial period KW - Western Interior Basin KW - high-resolution record KW - Greenland ice cores KW - paleosol sequence KW - time-scale KW - Chinese loess KW - astronomical calibration KW - chronology (AICC2012) KW - Antarctic ice Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-524271 SN - 1866-8372 IS - 1 ER - TY - JOUR A1 - Zehe, E. A1 - Ehret, U. A1 - Pfister, L. A1 - Blume, Theresa A1 - Schroeder, Boris A1 - Westhoff, M. A1 - Jackisch, C. A1 - Schymanski, Stanislauv J. A1 - Weiler, M. A1 - Schulz, K. A1 - Allroggen, Niklas A1 - Tronicke, Jens A1 - van Schaik, Loes A1 - Dietrich, Peter A1 - Scherer, U. A1 - Eccard, Jana A1 - Wulfmeyer, Volker A1 - Kleidon, Axel T1 - HESS Opinions: From response units to functional units: a thermodynamic reinterpretation of the HRU concept to link spatial organization and functioning of intermediate scale catchments JF - Hydrology and earth system sciences : HESS N2 - According to Dooge (1986) intermediate-scale catchments are systems of organized complexity, being too organized and yet too small to be characterized on a statistical/conceptual basis, but too large and too heterogeneous to be characterized in a deterministic manner. A key requirement for building structurally adequate models precisely for this intermediate scale is a better understanding of how different forms of spatial organization affect storage and release of water and energy. Here, we propose that a combination of the concept of hydrological response units (HRUs) and thermodynamics offers several helpful and partly novel perspectives for gaining this improved understanding. Our key idea is to define functional similarity based on similarity of the terrestrial controls of gradients and resistance terms controlling the land surface energy balance, rainfall runoff transformation, and groundwater storage and release. This might imply that functional similarity with respect to these specific forms of water release emerges at different scales, namely the small field scale, the hillslope, and the catchment scale. We thus propose three different types of "functional units" - specialized HRUs, so to speak - which behave similarly with respect to one specific form of water release and with a characteristic extent equal to one of those three scale levels. We furthermore discuss an experimental strategy based on exemplary learning and replicate experiments to identify and delineate these functional units, and as a promising strategy for characterizing the interplay and organization of water and energy fluxes across scales. We believe the thermodynamic perspective to be well suited to unmask equifinality as inherent in the equations governing water, momentum, and energy fluxes: this is because several combinations of gradients and resistance terms yield the same mass or energy flux and the terrestrial controls of gradients and resistance terms are largely independent. We propose that structurally adequate models at this scale should consequently disentangle driving gradients and resistance terms, because this optionally allow sequifinality to be partly reduced by including available observations, e. g., on driving gradients. Most importantly, the thermodynamic perspective yields an energy-centered perspective on rainfall-runoff transformation and evapotranspiration, including fundamental limits for energy fluxes associated with these processes. This might additionally reduce equifinality and opens up opportunities for testing thermodynamic optimality principles within independent predictions of rainfall-runoff or land surface energy exchange. This is pivotal to finding out whether or not spatial organization in catchments is in accordance with a fundamental organizing principle. Y1 - 2014 U6 - https://doi.org/10.5194/hess-18-4635-2014 SN - 1027-5606 SN - 1607-7938 VL - 18 IS - 11 SP - 4635 EP - 4655 PB - Copernicus CY - Göttingen ER - TY - JOUR A1 - Zehe, Erwin A1 - Gräff, Thomas A1 - Morgner, Markus A1 - Bauer, Andreas A1 - Bronstert, Axel T1 - Plot and field scale soil moisture dynamics and subsurface wetness control on runoff generation in a headwater in the Ore Mountains N2 - This study presents an application of an innovative sampling strategy to assess soil moisture dynamics in a headwater of the Weisseritz in the German eastern Ore Mountains. A grassland site and a forested site were instrumented with two Spatial TDR clusters (STDR) that consist of 39 and 32 coated TDR probes of 60 cm length. Distributed time series of vertically averaged soil moisture data from both sites/ensembles were analyzed by statistical and geostatistical methods. Spatial variability and the spatial mean at the forested site were larger than at the grassland site. Furthermore, clustering of TDR probes in combination with long-term monitoring allowed identification of average spatial covariance structures at the small field scale for different wetness states. The correlation length of soil water content as well as the sill to nugget ratio at the grassland site increased with increasing average wetness and but, in contrast, were constant at the forested site. As soil properties at both the forested and grassland sites are extremely variable, this suggests that the correlation structure at the forested site is dominated by the pattern of throughfall and interception. We also found a very strong correlation between antecedent soil moisture at the forested site and runoff coefficients of rainfall-runoff events observed at gauge Rehefeld. Antecedent soil moisture at the forest site explains 92% of the variability in the runoff coefficients. By combining these results with a recession analysis we derived a first conceptual model of the dominant runoff mechanisms operating in this catchment. Finally, we employed a physically based hydrological model to shed light on the controls of soil- and plant morphological parameters on soil average soil moisture at the forested site and the grassland site, respectively. A homogeneous soil setup allowed, after fine tuning of plant morphological parameters, most of the time unbiased predictions of the observed average soil conditions observed at both field sites. We conclude that the proposed sampling strategy of clustering TDR probes is suitable to assess unbiased average soil moisture dynamics in critical functional units, in this case the forested site, which is a much better predictor for event scale runoff formation than pre-event discharge. Long term monitoring of such critical landscape elements could maybe yield valuable information for flood warning in headwaters. We thus think that STDR provides a good intersect of the advantages of permanent sampling and spatially highly resolved soil moisture sampling using mobile rods. Y1 - 2010 UR - http://www.copernicus.org/EGU/hess/hess.html U6 - https://doi.org/10.5194/hess-14-873-2010 SN - 1027-5606 ER - TY - CHAP A1 - Zeilinger, Gerold A1 - Mutti, Maria A1 - Strecker, Manfred A1 - Rehak, Katrin A1 - Bookhagen, Bodo A1 - Schwab, Marco T1 - Integration of digital elevation models and satellite images to investigate geological processes. N2 - In order to better understand the geological boundary conditions for ongoing or past surface processes geologists face two important questions: 1) How can we gain additional knowledge about geological processes by analyzing digital elevation models (DEM) and satellite images and 2) Do these efforts present a viable approach for more efficient research. Here, we will present case studies at a variety of scales and levels of resolution to illustrate how we can substantially complement and enhance classical geological approaches with remote sensing techniques. Commonly, satellite and DEM based studies are being used in a first step of assessing areas of geologic interest. While in the past the analysis of satellite imagery (e.g. Landsat TM) and aerial photographs was carried out to characterize the regional geologic characteristics, particularly structure and lithology, geologists have increasingly ventured into a process-oriented approach. This entails assessing structures and geomorphic features with a concept that includes active tectonics or tectonic activity on time scales relevant to humans. In addition, these efforts involve analyzing and quantifying the processes acting at the surface by integrating different remote sensing and topographic data (e.g. SRTM-DEM, SSM/I, GPS, Landsat 7 ETM, Aster, Ikonos…). A combined structural and geomorphic study in the hyperarid Atacama desert demonstrates the use of satellite and digital elevation data for assessing geological structures formed by long-term (millions of years) feedback mechanisms between erosion and crustal bending (Zeilinger et al., 2005). The medium-term change of landscapes during hundred thousands to millions years in a more humid setting is shown in an example from southern Chile. Based on an analysis of rivers/watersheds combined with landscapes parameterization by using digital elevation models, the geomorphic evolution and change in drainage pattern in the coastal Cordillera can be quantified and put into the context of seismotectonic segmentation of a tectonically active region. This has far-reaching implications for earthquake rupture scenarios and hazard mitigation (K. Rehak, see poster on IMAF Workshop). Two examples illustrate short-term processes on decadal, centennial and millennial time scales: One study uses orogen scale precipitation gradients derived from remotely sensed passive microwave data (Bookhagen et al., 2005a). They demonstrate how debris flows were triggered as a response of slopes to abnormally strong rainfall in the interior parts of the Himalaya during intensified monsoons. The area of the orogen that receives high amounts of precipitation during intensified monsoons also constitutes numerous landslide deposits of up to 1km3 volume that were generated during intensified monsoon phase at about 27 and 9 ka (Bookhagen et al., 2005b). Another project in the Swiss Alps compared sets of aerial photographs recorded in different years. By calculating high resolution surfaces the mass transport in a landslide could be reconstructed (M. Schwab, Universität Bern). All these examples, although representing only a short and limited selection of projects using remote sense data in geology, have as a common approach the goal to quantify geological processes. With increasing data resolution and new sensors future projects will even enable us to recognize more patterns and / or structures indicative of geological processes in tectonically active areas. This is crucial for the analysis of natural hazards like earthquakes, tsunamis and landslides, as well as those hazards that are related to climatic variability. The integration of remotely sensed data at different spatial and temporal scales with field observations becomes increasingly important. Many of presently highly populated places and increasingly utilized regions are subject to significant environmental pressure and often constitute areas of concentrated economic value. Combined remote sensing and ground-truthing in these regions is particularly important as geologic, seismicity and hydrologic data may be limited here due to the recency of infrastructural development. Monitoring ongoing processes and evaluating the remotely sensed data in terms of recurrence of events will greatly enhance our ability to assess and mitigate natural hazards.
Dokument 1: Foliensatz | Dokument 2: Abstract
Interdisziplinäres Zentrum für Musterdynamik und Angewandte Fernerkundung Workshop vom 9. - 10. Februar 2006 Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-7063 ER - TY - JOUR A1 - Zhang Chengjun, A1 - Fan Rong, A1 - Li Jun, A1 - Mischke, Steffen A1 - Dembele, Blaise A1 - Hu Xiaolan, T1 - Carbon and oxygen isotopic compositions - how lacustrine environmental factors respond in northwestern and northeastern China JF - Acta geologica Sinica : english edition N2 - Surface lake sediments, 28 from Hoh Xil, 24 from northeastern China, 99 from Lake Bosten, 31 from Ulungur and 26 from Heihai were collected to determine C-13 and O-18 values. Considering the impact factors, conductivity, alkalinity, pH, TOC, C/N and carbonate-content in the sediments, Cl, P, S, and metal element ratios of Mg/Ca, Sr/Ca, Fe/Mn of bulk sediments as environmental variables enable evaluation of their influences on C-13 and O-18 using principal component analysis (PCA) method. The closure and residence time of lakes can influence the correlation between C-13 and O-18. Lake water will change from fresh to brackish with increasing reduction and eutrophication effects. Mg/Ca in the bulk sediment indicates the characteristic of residence time, Sr/Ca and Fe/Mn infer the salinity of lakes. Carbonate formation processes and types can influence the C-13-O-18 correlation. O-18 will be heavier from Mg-calcite and aragonite formed in a high-salinity water body than calcite formed in freshwater conditions. When carbonate content is less than 30%, there is no relationship with either C-13 or O-18, and also none between C-13 and O-18. More than 30%, carbonate content, however, co-varies highly to C-13 and O-18, and there is also a high correlation between C-13 and O-18. Vegetation conditions and primary productivity of lakes can influence the characteristics of C-13 and O-18, and their co-variance. Total organic matter content (TOC) in the sediments is higher with more terrestrial and submerged plants infilling. In northeastern and northwestern China, when organic matter in the lake sediments comes from endogenous floating organisms and algae, the C-13 value is high. C-13 is in the range of -4%o to 0 parts per thousand when organic matter comes mainly from floating organisms (C/N<6); in the range of -4 parts per thousand to 8 parts per thousand when organic matter comes from diatoms (C/N=6 to 8); and -8 parts per thousand to -4 parts per thousand when organic matter comes from aquatic and terrestrial plants (C/N>8). KW - Limnology KW - isotopic analysis KW - carbonates KW - organic matter KW - PCA KW - Tibet KW - Xinjiang KW - Northeastern China Y1 - 2013 U6 - https://doi.org/10.1111/1755-6724.12133 SN - 1000-9515 SN - 1755-6724 VL - 87 IS - 5 SP - 1344 EP - 1354 PB - Wiley-Blackwell CY - Hoboken ER - TY - JOUR A1 - Zhang, Chengjun A1 - Zhang, Wanyi A1 - Feng, Zhaodong A1 - Mischke, Steffen A1 - Gao, Xiang A1 - Gao, Dou A1 - Sun, Feifei T1 - Holocene hydrological and climatic change on the northern Mongolian Plateau based on multi-proxy records from Lake Gun Nuur JF - Palaeogeography, palaeoclimatology, palaeoecology : an international journal for the geo-sciences N2 - A multi-proxy study including analyses of delta C-13(org) for the lake sediment core GN-02 and grain size, TOC. CaCO3 content, delta C-13(carb) and delta O-18(carb) of bulk carbonate, and the mineralogy of the parallel core GN-04 from Gun Nuur was performed to reconstruct the Holocene hydrology and climate on the northern Mongolian Plateau. The chronology was established using 40 C-14 dates of bulk organic matter in addition to nine previously published radiocarbon dates for core GN-02, and further five C-14 dates for the new core GN-04. A lake reservoir effect of 1060 C-14 years was determined as the intercept of the high-resolution GN-02 age-depth model at the modern sediment surface. The size of the reservoir effect is supported by the age of the core-top sample (1200 +/- 40 C-14 years) and the determined difference between a wood-derived radiocarbon age from the GN-02 core base and the age-model inferred age for bulk organic matter at the same stratigraphic level (1000 C-14 years). Low lake level and prevailing aeolian sediment deposition at Gun Nuur under dry conditions were recorded during the earliest Holocene (> 10,800-10,300 cal a BP). Gun Nuur expanded under significantly wetter conditions between 10,300 and 7000 cal a BP. Unstable climate conditions existed in the mid Holocene (7000-2500 cal a BP) and three periods of low lake-levels and significantly drier conditions were recorded between 7000-5700, 4100-3600 and 3000-2500 cal a BP. Intermediate lake levels were inferred for the intervening periods. Around 2500 cal a BP, the climate change and wetter conditions were established again. As a consequence, the lake level of Gun Nuur rose again due to higher effective moisture and the relatively wet present conditions were achieved ca. 1600 cal a BP. Our results suggest that the initial Holocene climate change on the northern Mongolian Plateau was not accompanied by a rapid increase in precipitation as on the Tibetan Plateau. The establishment of wetter conditions in northern Mongolia lagged behind the early Holocene moisture increase on the Tibetan Plateau by ca. 1000 years. Subsiding dry air in the north of the Tibetan Plateau resulted from the strengthened summer monsoon on the Tibetan Plateau during the period of maximum summer insolation and probably inhibited a significant precipitation increase in Mongolia. The significant moisture increase in the Gun Nuur region at ca. 10.3 cal ka BP is probably not related to the northward shift of the present summer monsoon boundary or the moisture delivery from the northern Atlantic through the westerlies. Instead, water from melting snow, ice and frozen ground and the generation of precipitation from the local recycling of moisture are discussed as possible moisture source for the early onset of wetter conditions on the Mongolian Plateau. KW - Multi-proxy record KW - Sediment geochemistry KW - Mineralogy KW - Paleohydrology KW - Holocene KW - Mongolia Y1 - 2012 U6 - https://doi.org/10.1016/j.palaeo.2012.01.032 SN - 0031-0182 VL - 323 IS - 6 SP - 75 EP - 86 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Zhang, Di A1 - Cao, Kai A1 - Yuan, Xiaoping A1 - Wang, Guocan A1 - van der Beek, Pieter A. T1 - Late Oligocene-early Miocene origin of the First Bend of the Yangtze River explained by thrusting-induced river reorganization JF - Geomorphology N2 - The origin of the First Bend of the Yangtze River is key to understanding the birth of the modern Yangtze River. Despite considerable efforts, the timing and mechanism of formation of the First Bend remain highly debated. Inverse river-profile modeling of three tributaries (Chongjiang, Lima, and Gudu) of the Jinsha River, integrated with regional tectonic and geomorphic interpretations, allows the onset of incision at the First Bend to be constrained to 28-20 Ma. The spatio-temporal coincidence of initial river incision and activity of Yulong Thrust Belt in southeastern Tibet highlights thrusting to be fundamental in reshaping the pre-existing stream network at the First Bend. These results enable us to reinterpret a change in sedimentary environment from a braided river to a swamp-like lake in the Jianchuan Basin south of the First Bend, recording the destruction of the hypothesized southwards-flowing paleo-Jinsha and Shuiluo Rivers at ~36-35 Ma by magmatism. During the late Oligoceneearly Miocene, the paleo-Shuiluo River was diverted to the north by focused rock uplift due to thrusting along the Yulong Thrust Belt, which also led to exhumation of the Jianchuan Basin. Diversion of the paleo-Shuiluo River can be explained by capture from a downstream river in the footwall of the Yulong Thrust Belt. Subsequent rapid headward erosion, that was caused by thrusting-induced drop of local base level, is recorded by upstream younging ages for the onset of incision and led to the formation of the First Bend. The combination of new ages for the onset of incision at 28-20 Ma at the First Bend and younger ages upstream indicates northwards expansion of the Jinsha River at a rate of 62 +/- 18 mm/yr. Our results suggest that the origin of the First Bend was likely triggered by thrusting at 28-20 Ma, after which the Yangtze River formed. KW - Tibetan Plateau KW - Yangtze River KW - river incision KW - inverse modeling Y1 - 2022 U6 - https://doi.org/10.1016/j.geomorph.2022.108303 SN - 0169-555X SN - 1872-695X VL - 411 PB - Elsevier Science CY - Amsterdam [u.a.] ER - TY - JOUR A1 - Zhang, Liyu A1 - Chen, Daizhao A1 - Kuang, Guodun A1 - Guo, Zenghui A1 - Zhang, Gongjing A1 - Wang, Xia T1 - Persistent oxic deep ocean conditions and frequent volcanic activities during the Frasnian-Famennian transition recorded in South China JF - Global and planetary change N2 - The Frasnian-Famennian (F-F) transition of Late Devonian was a critical episode in geological history, recording a major mass extinction event. In this study, we focus on an F-F succession from a deep marine context in Bancheng, southern Guangxi, South China, to investigate coeval changes in pelagic environments of the Paleo-Tethys Ocean. The studied succession is exclusively composed of bedded cherts intercalated with multiple siliceous volcanic ash beds. A SIMS zircon U-Pb Concordia age of 367.8 +/- 2.5 Ma is reported for a tuffaceous layer slightly above the F-F boundary. Geochemical ratios of Al/(Al + Fe + Mn), Ce/Ce*, Y/Ho, and Al, Fe contents in bedded cherts indicate that they are of predominantly biogenic/chemical origin with some terrigenous inputs. Negligible enrichment of redox sensitive elements (Mo, U, V) and low V/Cr ratios (<2) suggest persistently oxic conditions existed in the deep pelagic basin at Bancheng, South China during the F-F transition. These findings call into question the widely held hypothesis that marine anoxia was the primary killing mechanism for the F-F crisis. In contrast, multiple tuffaceous layers throughout the F-F boundary succession indicate frequent volcanic activity, which could have released massive amounts of greenhouse gases into the atmosphere, inducing climate warming. This scenario may have increased continental weathering and riverine fluxes into the ocean, reconciling the increases in Al2O3 content and Al/(Al + Fe + Mn) ratio across the F-F boundary. Documentation of persistently oxic conditions and frequent volcanic activitiy provides new perspectives on the inter-relationship between volcanism, climate, and oceanic redox fluctuation during the F-F biotic crisis. KW - Late Devonian KW - Bedded chert KW - Major and trace elements KW - Deep ocean redox condition KW - Volcanic activity KW - Zircon U-Pb dating Y1 - 2020 U6 - https://doi.org/10.1016/j.gloplacha.2020.103350 SN - 0921-8181 VL - 195 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Zhang, Peng A1 - Najman, Yani A1 - Mei, Lianfu A1 - Millar, Ian A1 - Sobel, Edward A1 - Carter, Andrew A1 - Barfod, Dan A1 - Dhuime, Bruno A1 - Garzanti, Eduardo A1 - Govin, Gwladys A1 - Vezzoli, Giovanni A1 - Hu, Xiaolin T1 - Palaeodrainage evolution of the large rivers of East Asia, and Himalayan-Tibet tectonics JF - Earth science reviews N2 - A number of sedimentary provenance studies have been undertaken in order to determine whether the palaeo-Red River was once a river of continental proportions into which the upper reaches of the Yangtze, Salween, Mekong, Irrawaddy, and Yarlung drained. We have assessed the evidence that the Yarlung originally flowed into the palaeo-Red river, and then sequentially into the Irrawaddy and Brahmaputra, connecting to the latter first via the Lohit and then the Siang. For this river system, we have integrated our new data from the Paleogene-Recent Irrawaddy drainage basin (detrital zircon U-Pb with Hf and fission track, rutile U-Pb, mica Ar-Ar, bulk rock Sr-Nd, and petrography) with previously published data, to produce a palaeodrainage model that is consistent with all datasets. In our model, the Yarlung never flowed into the Irrawaddy drainage: during the Paleogene, the Yarlung suture zone was an internally drained basin, and from Neogene times onwards the Yarlung drained into the Brahmaputra in the Bengal Basin. The Central Myanmar Basin, through which the Irrawaddy River flows today, received predominantly locally-derived detritus until the Middle Eocene, the Irrawaddy initiated as a through-going river draining the Mogok Metamorphic Belt and Bomi-Chayu granites to the north sometime in the Late Eocene to Early Oligocene, and the river was dominated by a stable MMB-dominated drainage throughout the Neogene to present day. Existing evidence does not support any connection between the Yarlung and the Red River in the past, but there is a paucity of suitable palaeo-Red River deposits with which to make a robust comparison. We argue that this limitation also precludes a robust assessment of a palaeo-connection between the Yangtze/ Salween/Mekong and the Red River; it is difficult to unequivocally interpret the recorded provenance changes as the result of specific drainage reorganisations. We highlight the palaeo-Red River deposits of the Hanoi Basin as a potential location for future research focus in view of the near-complete Cenozoic record of palaeo-Red River deposits at this location. A majority of previous studies consider that if a major continental-scale drainage ever existed at all, it fragmented early in the Cenozoic. Such a viewpoint would agree with the growing body of evidence from palaeoaltitude studies that large parts of SE Tibet were uplifted by this period. This then leads towards the intriguing question as to the mechanisms which caused the major period of river incision in the Miocene in this region. KW - Eastern Tibet KW - Palaeodrainage KW - Red River KW - Irrawaddy River KW - Yarlung Tsangpo KW - Central Myanmar Basin Y1 - 2019 U6 - https://doi.org/10.1016/j.earscirev.2019.02.003 SN - 0012-8252 SN - 1872-6828 VL - 192 SP - 601 EP - 630 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Zhang, Shengrui A1 - Xu, Qinghai A1 - Gaillard, Marie-Jose A1 - Cao, Xianyong A1 - Li, Jianyong A1 - Zhang, Liyan A1 - Li, Yuecong A1 - Tian, Fang A1 - Zhou, Liping A1 - Lin, Fengyou A1 - Yang, Xiaolan T1 - Characteristic pollen source area and vertical pollen dispersal and deposition in a mixed coniferous and deciduous broad-leaved woodland in the Changbai mountains, northeast China JF - Vegetation History and Archaeobotany N2 - Pollen influx (number of pollen grains cm−2 year−1) can objectively reflect the dispersal and deposition features of pollen within a certain time and space, and is often used as a basis for the quantitative reconstruction of palaeovegetation; however, little is known about the features and mechanisms of vertical dispersal of pollen. Here we present the results from a 5 year (2006–2010) monitoring program using pollen traps placed at different heights from ground level up to 60 m and surface soil samples in a mixed coniferous and deciduous broad-leaved woodland in the Changbai mountains, northeastern China. The pollen percentages and pollen influx from the traps have very similar characteristics to the highest values for Betula, Fraxinus, Quercus and Pinus, among the tree taxa and Artemisia, Chenopodiaceae and Asteraceae among the herb taxa. Pollen influx values vary significantly with height and show major differences between three distinct layers, above-canopy (≥32 m), within the trunk layer (8 ≤ 32 m) and on the ground (0 m). These differences in pollen influx are explained by differences in (i) the air flows in each of these layers and (ii) the fall speed of pollen of the various taxa. We found that the pollen recorded on the ground surface is a good representation of the major part of the pollen transported in the trunk space of the woodland. Comparison of the pollen influx values with the theoretical, calculated “characteristic pollen source area” (CPSA) of 12 selected taxa indicates that the pollen deposited on the ground surface of the woodland is a fair representation with 85–90 % of the total pollen deposited at a wind speed of 2.4 m s−1 coming from within ca. 1–5 km for Pinus and Quercus, ca. 5–10 km for Ulmus, Tilia, Oleaceae and Betula, ca. 20–40 km for Fraxinus, Poaceae, Chenopodiaceae, Populus and Salix, and ca. 30–60 km for Artemisia; it is also a good representation with 90–98 % of the total pollen deposited coming from within 60 km at a wind speed of 2.4 m s−1, or 100 km at a wind speed: 6 m s−1, for the 12 selected taxa used in the CPSA calculation. Furthermore, comparison with the vegetation map of the area around the sampling site shows that the pollen deposited on the ground represents all plant communities which grow in the study area within 70 km radius of the sampling site. In this study, the pollen percentages obtained from the soil surface samples are significantly biased towards pollen taxa with good preservation due to thick and robust pollen walls. Therefore, if mosses are available instead, soil samples should be avoided for pollen studies, in particular for the study of pollen-vegetation relationships, the estimation of pollen productivities and quantitative reconstruction of past vegetation. The results also indicate that the existing model of pollen dispersal and deposition, Prentice’s model, provides a fair description of the actual pollen dispersal and deposition in this kind of woodland, which suggests that the application of the landscape reconstruction algorithm would be relevant for reconstruction of this type of woodland in the past. KW - Changbai mountains KW - Mixed coniferous and deciduous broad-leaved woodland KW - Vertical pollen dispersal and deposition KW - Characteristic pollen source area Y1 - 2016 U6 - https://doi.org/10.1007/s00334-015-0532-0 SN - 0939-6314 SN - 1617-6278 VL - 25 SP - 29 EP - 43 PB - Springer CY - New York ER - TY - JOUR A1 - Zhang, Wanyi A1 - Mischke, Steffen A1 - Zhang, Chengjun A1 - Gao, Dou A1 - Fan, Rong T1 - Ostracod distribution and habitat relationships in the Kunlun Mountains, northern Tibetan Plateau JF - Quaternary international : the journal of the International Union for Quaternary Research N2 - Surface sediment samples were collected from the lakes Heihai, Kusai, Haiding Nuur and Yan Hu, and from streams and ponds in the Kunlun Mountains at the northern margin of the Tibetan Plateau to investigate the sub-fossil ostracod (micro-crustacean) fauna of the region. Among 65 collected samples, 46 ostracod shell-rich samples were used to study the relationship between the ostracod distribution and specific conductivity (SC) of the water, which ranged from 0.6 to 53.0 mS cm(-1). A total of eleven ostracod species was identified from this region, with about half of the species restricted to the Tibetan Plateau and its adjacent mountain areas, and the other half representing Holarctic taxa. Tonnacypris cf. estonica and Tonnacypris tonnensis are reported from the Tibetan Plateau for the first time. Leucocythere sp. is the dominant species and Ilyocypris cf. bradyi is also relatively abundant. The other seven species were recorded with limited abundances apparently due to lower SC tolerances. Leucocythere sp. was recorded over the full SC range from 0.6 to 53 mS cm(-1). Eucypris mareotica is a typical brackish and saline water species, which was found at sample sites with high SC (2.8-53.0 mS cm(-1)). In contrast, Leucocythere dorsotuberosa, Candona candida and Eucypris afghanistanensis prefer freshwater to slightly oli-gohaline waters with SC < 1.8 mS cm(-1). The SC optimum and tolerance range for each species were determined and compared to earlier reported data from other regions of Central Asia. The results indicate that species assemblage data from fossil ostracod shells have a large potential to provide information on past SC levels and more general climate-determined moisture conditions. (C) 2013 Elsevier Ltd and INQUA. All rights reserved. Y1 - 2013 U6 - https://doi.org/10.1016/j.quaint.2013.06.020 SN - 1040-6182 VL - 313 SP - 38 EP - 46 PB - Elsevier CY - Oxford ER - TY - JOUR A1 - Zhang, Xiaolin A1 - Yang, Xiaoqiang A1 - Jomaa, Seifeddine A1 - Rode, Michael T1 - Analyzing impacts of seasonality and landscape gradient on event-scale nitrate-discharge dynamics based on nested high-frequency monitoring JF - Journal of hydrology N2 - Increasingly available high-frequency data during storm events, when hydrological dynamics most likely activate nitrate storage-flux exchanges, reveal insights into catchment nitrate dynamics. In this study, we explored impacts of seasonality and landscape gradients on nitrate concentration-discharge (C-Q) hysteresis patterns in the Selke catchment, central Germany, which has heterogeneous combinations of meteorological, hydrogeological and land use conditions. Three nested gauging stations established along the main Selke River captured flow and nitrate export dynamics from the uppermost subcatchment (mixed forest and arable land), middle subcatchment (pure steep forest) and lowermost subcatchment (arable and urban land). We collected continuous high-frequency (15-min) discharge and nitrate concentration data from 2012 to 2017 and analyzed the 223 events detected at all three stations. A dominant hysteresis pattern in the uppermost and middle subcatchments was counter-clockwise and combined with an accretion effect, indicating many proximal and mobilized distal nitrate sources. However, 66% of all events at the catchment outlet experienced a dilution effect, possibly due to mechanisms that vary seasonally. During wetting/wet periods (October-March), it was combined mainly with a counter-clockwise pattern due to the dominance of event runoff volume from the uppermost and middle subcatchments. During drying/dry periods (April-September), however, it was combined mainly with a clockwise pattern due to occasional quick surface flows from lowland near-stream urban areas. In addition, the clockwise hysteresis occurred mainly from May-October during mostly drying/dry periods at all three sites, indicating little distal nitrate transport in response to the low terrestrial hydrological connectivity, especially in the lowermost dry and flat sub-catchment. This comprehensive analysis (i.e., clockwise vs. counter-clockwise, accretion vs. dilution) enables in-depth analysis of nitrate export mechanisms during certain periods under different landscape conditions. Specific combination of C-Q relationships could identify target locations for agricultural management actions that decrease nitrate output. Therefore, we strongly encourage long-term multisite and high-frequency monitoring strategies in heterogeneous nested catchment(s), which can help understand process mechanisms, generate data for physical-based water-quality modeling and provide guidance for water and agricultural management. KW - nitrate export dynamic KW - C-Q relationship KW - hysteresis pattern KW - high-frequency data KW - landscape effect KW - seasonality effect Y1 - 2020 U6 - https://doi.org/10.1016/j.jhydrol.2020.125585 SN - 0022-1694 SN - 1879-2707 VL - 591 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Zhang, Yang A1 - Huang, Wentao A1 - Huang, Baochun A1 - van Hinsbergen, Douwe J. J. A1 - Yang, Tao A1 - Dupont-Nivet, Guillaume A1 - Guo, Zhaojie T1 - 53-43Ma Deformation of Eastern Tibet Revealed by Three Stages of Tectonic Rotation in the Gongjue Basin JF - Journal of geophysical research : Solid earth N2 - The Gongjue basin from the eastern Qiangtang terrane is located in the transition region where the regional structural lineation curves from east-west-oriented in Tibet to north-south-oriented in Yunnan. In this study, we sampled the red beds in the basin from the lower Gongjue to upper Ranmugou formations for the first time covering the entire stratigraphic profile. The stratigraphic ages are bracketed within 53-43Ma by new detrital zircon U-Pb ages constraining the maximum deposition age to 52.51.5Ma. Rock magnetic and petrographic studies indicate that detrital magnetite and hematite are the magnetic carriers. Positive reversals and fold tests demonstrate that the characteristic remanent magnetization has a primary origin. The Gongjue and Ranmugou formations yield mean characteristic remanent magnetization directions of D-s/I-s=31.0 degrees/21.3 degrees and D-s/I-s=15.9 degrees/22.0 degrees, respectively. The magnetic inclination of these characteristic remanent magnetizations is significantly shallowed compared to the expected inclination for the locality. However, the elongation/inclination correction method does not provide a meaningful correction, likely because of syn-depositional rotation. Rotations relative to the Eurasian apparent polar wander path occurred in three stages: Stage I, 33.33.4 degrees clockwise rotation during the deposition of the Gongjue and lower Ranmugou formations; Stage II, 26.93.7 degrees counterclockwise rotation during deposition of the lower and middle Ranmugou formation; and Stage III, 17.73.3 degrees clockwise rotation after 43Ma. The complex rotation history recorded in the basin is possibly linked to sinistral shear along the Qiangtang block during India indentation into Asia and the early stage of the extrusion of the northwestern Indochina blocks away from eastern Tibet. KW - eastern Qiangtang terrane KW - Gongjue basin KW - paleomagnetism KW - inclination shallowing KW - rotation Y1 - 2018 U6 - https://doi.org/10.1002/2018JB015443 SN - 2169-9313 SN - 2169-9356 VL - 123 IS - 5 SP - 3320 EP - 3338 PB - American Geophysical Union CY - Washington ER - TY - JOUR A1 - Zhang, Yang A1 - Huang, Wentao A1 - Zhang, Yuanyuan A1 - Poujol, Marc A1 - Guillot, Stephane A1 - Roperch, Pierrick A1 - Dupont-Nivet, Guillaume A1 - Guo, Zhaojie T1 - Detrital zircon provenance comparison between the Paleocene-Eocene Nangqian-Xialaxiu and Gongjue basins: New insights for Cenozoic paleogeographic evolution of the eastern Tibetan Plateau JF - Palaeogeography, palaeoclimatology, palaeoecology : an international journal for the geo-sciences N2 - Paleogeographic reconstructions of terranes can greatly benefit from the provenance analysis of sediments. A series of Cenozoic basins provide key sedimentary archives for investigating the growth of the Tibetan Plateau, yet the provenance of the sediments in these basins has never been constrained robustly. Here we report sedimentary petrological and detrital zircon geochronological data from the Paleocene-Eocene Nangqian-Xialaxiu and Gongjue basins. Sandstone detrital modes and zircon morphology suggest that the samples collected in these two basins were sourced from recycled orogen. Detrital zircon geochronology indicates that sediments in the Nangqian-Xialaxiu Basin are characterized by two distinct age populations at 220-280 Ma and 405-445 Ma. In contrast, three predominant age populations of 207-256 Ma, 423-445 Ma, and 1851-1868 Ma, and two subordinate age populations of similar to 50 Ma and similar to 2500 Ma, are recognized in the Gongjue Basin. Comparison with detrital zircon ages from the surrounding terranes suggests that sediments in the Nangqian-Xialaxiu Basin come from the neighboring thrust belts, whereas sediments from the Gongjue Basin are predominantly derived from the distant Songpan-Ganzi Terrane with minor contribution from the surrounding areas. A three-stage Cenozoic evolution of the eastern Tibetan Plateau is proposed. During the Paleocene, the Nangqian-Xialaxiu Basin appeared as a set of small intermontane sub-basins and received plentiful sediments from the neighboring mountain belts; during the Eocene, the Gongjue Basin kept a relatively low altitude and was a depression at the edge of a proto-Plateau; since the Oligocene, the Tibetan Plateau further uplifted and the marginal Gongjue Basin was involved in the Tibetan interior orogeny, indicating the eastward propagation of the Tibetan Plateau. KW - U-Pb geochronology KW - Sandstone detrital modes KW - Cenozoic basins KW - Tectonic reconstruction KW - Eastern Tibetan Plateau Y1 - 2019 U6 - https://doi.org/10.1016/j.palaeo.2019.109241 SN - 0031-0182 SN - 1872-616X VL - 533 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Zhang, Yanqiu A1 - Chen, Daizhao A1 - Zhou, Xiqiang A1 - Guo, Zenghui A1 - Wei, Wenwen A1 - Mutti, Maria T1 - Depositional facies and stratal cyclicity of dolomites in the Lower Qiulitag Group (Upper Cambrian) in northwestern Tarim Basin, NW China JF - Facies : an international journal of palaeontology, sedimentology, geology N2 - The Upper Cambrian Lower Qiulitag Group in the Tarim Basin, NW China, is overwhelmingly composed of cyclic dolomites. Based on extensive field investigations and facies analysis from four outcrop sections in the Bachu-Keping area, northwestern Tarim Basin, four main types of facies are recognized: open-marine subtidal, restricted shallow subtidal, intertidal, and supratidal facies, and these are further subdivided into ten lithofacies. In general, these facies are vertically arranged into shallowing-upward, metre-scale cycles. These cycles are commonly composed of a thin basal horizon reflecting abrupt deepening, and a thicker upper succession showing gradual shallowing upwards. Based on the vertical facies arrangements and changes across boundary surfaces, two types of cycle: peritidal and shallow subtidal cycle, are further identified. The peritidal cycles, predominating over the lower-middle Lower Qiulitag Group, commence with shallow subtidal to lower intertidal facies and are capped by inter-supratidal facies. In contrast, the shallow subtidal cycles, dominating the upper Lower Qiulitag Group, are capped by shallow-subtidal facies. Based on vertical lithofacies variations, cycle stacking patterns, and accommodation variations revealed by Fischer plots, six larger-scale third-order depositional sequences (Sq1-Sq6) are recognized. These sequences generally consist of a lower transgressive and an upper regressive systems tract. The transgressive tracts are dominated by thicker-than-average cycles, indicating an overall accommodation increase, whereas the regressive tracts are characterized by thinner-than-average peritidal cycles, indicating an overall accommodation decrease. The sequence boundaries are characterized by transitional zones of stacked thinner-than-average cycles, rather than by a single surface. These sequences can further be grouped into lower-order sequence sets: the lower and upper sequence sets. The lower sequence set, including Sq1-Sq3, is characterized by peritidal facies-dominated sequences and a progressive decrease in accommodation space, indicating a longer-term fall in sea level. In contrast, the upper sequence set (Sq4-Sq6) is characterized by subtidal facies-dominated sequences and a progressive increase in accommodation space, indicating a longer-term rise in sea level. KW - Dolomites KW - Facies KW - Stratal cyclicity KW - Sequences KW - Upper Cambrian KW - Tarim Basin KW - China Y1 - 2015 U6 - https://doi.org/10.1007/s10347-014-0417-1 SN - 0172-9179 SN - 1612-4820 VL - 61 IS - 1 PB - Springer CY - New York ER - TY - JOUR A1 - Zhang, Zhuo-dong A1 - Wieland, Ralf A1 - Reiche, Matthias A1 - Funk, Roger A1 - Hoffmann, Carsten A1 - Li, Yong A1 - Sommer, Michael T1 - A computational fluid dynamics model for wind simulation: model implementation and experimental validation JF - Journal of Zhejiang University : an international journal ; Science A, Applied physics & engineering : an international applied physics & engineering journal N2 - To provide physically based wind modelling for wind erosion research at regional scale, a 3D computational fluid dynamics (CFD) wind model was developed. The model was programmed in C language based on the Navier-Stokes equations, and it is freely available as open source. Integrated with the spatial analysis and modelling tool (SAMT), the wind model has convenient input preparation and powerful output visualization. To validate the wind model, a series of experiments was conducted in a wind tunnel. A blocking inflow experiment was designed to test the performance of the model on simulation of basic fluid processes. A round obstacle experiment was designed to check if the model could simulate the influences of the obstacle on wind field. Results show that measured and simulated wind fields have high correlations, and the wind model can simulate both the basic processes of the wind and the influences of the obstacle on the wind field. These results show the high reliability of the wind model. A digital elevation model (DEM) of an area (3800 m long and 1700 m wide) in the Xilingele grassland in Inner Mongolia (autonomous region, China) was applied to the model, and a 3D wind field has been successfully generated. The clear implementation of the model and the adequate validation by wind tunnel experiments laid a solid foundation for the prediction and assessment of wind erosion at regional scale. KW - Wind model KW - Computational fluid dynamics (CFD) KW - Wind erosion KW - Wind tunnel experiments KW - Spatial analysis and modelling tool (SAMT) KW - Open source Y1 - 2012 U6 - https://doi.org/10.1631/jzus.A1100231 SN - 1673-565X VL - 13 IS - 4 SP - 274 EP - 283 PB - Zhejiang University Press CY - Hangzou ER - TY - THES A1 - Zhang, Zhuodong T1 - A regional scale study of wind erosion in the Xilingele grassland based on computational fluid dynamics Y1 - 2011 CY - Potsdam ER - TY - JOUR A1 - Zhang, Zhuodong A1 - Wieland, Ralf A1 - Reiche, Matthias A1 - Funk, Roger A1 - Hoffmann, Carsten A1 - Li, Yong A1 - Sommer, Michael T1 - Identifying sensitive areas to wind erosion in the xilingele grassland by computational fluid dynamics modelling JF - Ecological informatics : an international journal on ecoinformatics and computational ecolog N2 - In order to identify the areas in the Xilingele grassland which are sensitive to wind erosion, a computational fluid dynamics model (CFD-WEM) was used to simulate the wind fields over a region of 37 km(2) which contains different topography and land use types. Previous studies revealed the important influences of topography and land use on wind erosion in the Xilingele grassland. Topography influences wind fields at large scale, and land use influences wind fields near the ground. Two steps were designed to implement the CFD wind simulation, and they were respectively to simulate the influence of topography and surface roughness on the wind. Digital elevation model (DEM) and surface roughness length were the key inputs for the CFD simulation. The wind simulation by CFD-WEM was validated by a wind data set which was measured simultaneously at six positions in the field. Three scenarios with different wind velocities were designed based on observed dust storm events, and wind fields were simulated according to these scenarios to predict the sensitive areas to wind erosion. General assumptions that cropland is the most sensitive area to wind erosion and heavily and moderately grazed grasslands are both sensitive etc. can be refined by the modelling of CFD-WEM. Aided by the results of this study, the land use planning and protection measures against wind erosion can be more efficient. Based on the case study in the Xilingele grassland, a method of regional wind erosion assessment aided by CFD wind simulation is summarized. The essence of this method is a combination of CFD wind simulation and determination of threshold wind velocity for wind erosion. Because of the physically-based simulation and the flexibility of the method, it can be generalised to other regions. KW - Sensitive areas KW - Wind erosion KW - Computational fluid dynamics KW - Grassland KW - Surface roughness Y1 - 2012 U6 - https://doi.org/10.1016/j.ecoinf.2011.12.002 SN - 1574-9541 VL - 8 IS - 5 SP - 37 EP - 47 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Zhang, Zhuodong A1 - Wieland, Ralf A1 - Reiche, Matthias A1 - Funk, Roger A1 - Hoffmann, Carsten A1 - Li, Yong A1 - Sommer, Michael T1 - Wind modelling for wind erosion research by open source computational fluid dynamics JF - Ecological informatics : an international journal on ecoinformatics and computational ecolog N2 - The open source computational fluid dynamics (CFD) wind model (CFD-WEM) for wind erosion research in the Xilingele grassland in Inner Mongolia (autonomous region, China) is compared with two open source CFD models Gerris and OpenFOAM. The evaluation of these models was made according to software technology, implemented methods, handling, accuracy and calculation speed. All models were applied to the same wind tunnel data set. Results show that the simplest CFD-WEM has the highest calculation speed with acceptable accuracy, and the most powerful OpenFOAM produces the simulation with highest accuracy and the lowest calculation speed. Gerris is between CFD-WEM and OpenFOAM. It calculates faster than OpenFOAM, and it is capable to solve different CFD problems. CFD-WEM is the optimal model to be further developed for wind erosion research in Inner Mongolia grassland considering its efficiency and the uncertainties of other input data. However, for other applications using CFD technology, Gerris and OpenFOAM can be good choices. This paper shows the powerful capability of open source CFD software in wind erosion study, and advocates more involvement of open source technology in wind erosion and related ecological researches. KW - Computational fluid dynamics KW - Wind modelling KW - Open source KW - Wind erosion KW - Gerris KW - OpenFOAM KW - SAMT Y1 - 2011 U6 - https://doi.org/10.1016/j.ecoinf.2011.02.001 SN - 1574-9541 VL - 6 IS - 5 SP - 316 EP - 324 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Zhao, Peng A1 - Kuhn, Daniela A1 - Oye, Volker A1 - Cesca, Simone T1 - Evidence for tensile faulting deduced from full waveform moment tensor inversion during the stimulation of the Basel enhanced geothermal system JF - Geothermics : an international journal of geothermal research and its applications N2 - Our study presents the results of a moment tensor inversion of 19 microseismic events with M-L between 2.0 and 3.4, associated with the stimulation operation of an enhanced geothermal reservoir in Basel, Switzerland, in 2006. We adopt a three-step procedure to retrieve point source solution parameters based on full waveform inversion. The inversion is performed by fitting displacement amplitude spectra and displacement seismograms in the first and second step, respectively, assuming a double couple source model and thus obtaining focal solutions for all 19 events. Our results are in agreement with focal mechanisms from a previous study, which employed P wave first-motion polarities from more than 40 stations, whereas our solutions are achieved using full waveform data recorded by less than 10 surface stations. In the last step, a full moment tensor inversion is performed. The results from the moment tensor inversion show an improvement on the waveform fitting compared to the double couple models, which is verified by an F-test. We investigate the stability of the moment tensor solutions by employing different velocity models. The isotropic components of the moment tensor solutions of some events are not negligible, suggesting source volume changes due to fluid injection. Events with significant isotropic components occurred mainly during the stimulation phase and close to the injection well. On the other hand, events that occurred in the post-stimulation phase are predominantly pure shear failure and located further away from the well bore. These spatio-temporal patterns can be explained by the influence of pore pressure variations during and after the hydraulic stimulation at the geothermal site. (C) 2014 Elsevier Ltd. All rights reserved. KW - Induced seismicity KW - Hydraulic fracture KW - Crack opening and closure KW - Source mechanism KW - F-test Y1 - 2014 U6 - https://doi.org/10.1016/j.geothermics.2014.01.003 SN - 0375-6505 SN - 1879-3576 VL - 52 SP - 74 EP - 83 PB - Elsevier CY - Oxford ER - TY - THES A1 - Zhao, Xueru T1 - Palaeoclimate and palaeoenvironment evolution from the last glacial maximum into the early holocene (23-8 ka BP) derived from Lago Grande di Monticchio sediment record (S Italy) Y1 - 2021 ER - TY - JOUR A1 - Zhao, Yan A1 - Herzschuh, Ulrike T1 - Modern pollen representation of source vegetation in the Qaidam Basin and surrounding mountains, north-eastern Tibetan Plateau N2 - We use a data set of 35 surface pollen samples from lake sediments, moss polsters and top soils on the north- eastern Tibetan Plateau to explore the relationship between modern pollen assemblages and contemporary vegetation patterns. The surface pollen transect spanned four vegetation zones--alpine meadow, steppe, steppe desert and desert-- under different climatic/elevational conditions. Relative representation (R (rel)) values and Principal Components Analysis (PCA) were used to determine the relationships between modern pollen and vegetation and regional climate gradients. The results show that the main vegetation zones along the regional and elevational transects can be distinguished by their modern pollen spectra. Relative to Poaceae, a high representation of Artemisia, Nitraria and Chenopodiaceae was found, while Cyperaceae and Gentiana showed values in the middle range, and Ranunculaceae, Asteraceae, Ephedra and Fabaceae had low relative representation values. PCA results indicate a high correlation between the biogeoclimatic zones and annual precipitation and annual temperature and July temperature. The Artemisia/ Chenopodiaceae ratio and the Artemisia/Cyperaceae ratio are useful tools for qualitative and semi-quantitative palaeoenvironmental reconstruction on the north-eastern Tibetan Plateau. Surface lake sediments are found to have different palynomorph spectra from moss cushion and soil samples, reflecting the larger pollen source area in the contemporary vegetation for lakes. Y1 - 2009 UR - http://www.springerlink.com/content/107470 U6 - https://doi.org/10.1007/s00334-008-0201-7 SN - 0939-6314 ER - TY - JOUR A1 - Zhelayskaya, Irina S. A1 - Vasile, Ruggero A1 - Shprits, Yuri Y. A1 - Stolle, Claudia A1 - Matzka, Jürgen T1 - Systematic Analysis of Machine Learning and Feature Selection Techniques for Prediction of the Kp Index JF - Space Weather: The International Journal of Research and Applications N2 - The Kp index is a measure of the midlatitude global geomagnetic activity and represents short-term magnetic variations driven by solar wind plasma and interplanetary magnetic field. The Kp index is one of the most widely used indicators for space weather alerts and serves as input to various models, such as for the thermosphere and the radiation belts. It is therefore crucial to predict the Kp index accurately. Previous work in this area has mostly employed artificial neural networks to nowcast Kp, based their inferences on the recent history of Kp and on solar wind measurements at L1. In this study, we systematically test how different machine learning techniques perform on the task of nowcasting and forecasting Kp for prediction horizons of up to 12 hr. Additionally, we investigate different methods of machine learning and information theory for selecting the optimal inputs to a predictive model. We illustrate how these methods can be applied to select the most important inputs to a predictive model of Kp and to significantly reduce input dimensionality. We compare our best performing models based on a reduced set of optimal inputs with the existing models of Kp, using different test intervals, and show how this selection can affect model performance. KW - Kp index KW - Predictive models KW - Feature selection KW - Machine learning KW - Validation Y1 - 2019 U6 - https://doi.org/10.1029/2019SW002271 SN - 1542-7390 VL - 17 IS - 10 SP - 1461 EP - 1486 PB - American Geophysical Union CY - Washington ER - TY - JOUR A1 - Zhilich, Snezhana A1 - Rudaya, Natalia A1 - Krivonogov, Sergei A1 - Nazarova, Larisa B. A1 - Pozdnyakov, Dmitry T1 - Environmental dynamics of the Baraba forest-steppe (Siberia) over the last 8000 years and their impact on the types of economic life of the population JF - Quaternary science reviews : the international multidisciplinary research and review journal N2 - This article offers a reconstruction of the vegetation and climate of the south-western Siberian Baraba forest-steppe area during the last ca. 8000 years. The analysis of palynological data from the sediment core of Lake Bolshie Toroki using quantitative methods has made it possible to reconstruct changes of the dominant types of vegetation and mean July air temperatures. Coniferous forests grew in the vicinity of the lake, and mean July air temperatures were similar to present-day ones between 7.9 and 7.0 kyr BP. The warmest and driest climate occurred at 7.0-5.0 kyr BP. At that time, the region had open steppe landscapes; birch groves began to spread. A cooling trend is seen after 5.5 kyr BP, when forest-steppe began to emerge. Steppe communities started to dominate again after 1.5 kyr BP. Mean July air temperatures lower than now are reconstructed for the period of 1.9-1 kyr BP, and then the temperatures became similar to present-day ones. Comparing the archaeological data on the types of economy of the population which inhabited the Baraba forest-steppe with the data on changes in the natural environment revealed a connection between the gradual transition from hunting and fishing to livestock breeding and the development of forest-steppe landscapes with a decrease in the area covered by forests. The development of the forest-steppe as an ecotonic landscape starting around 5 kyr BP might have contributed to the coexistence of several archaeological cultures with different types of economy on the same territory. (C) 2017 Elsevier Ltd. All rights reserved. KW - Holocene KW - Climate dynamics KW - Russia KW - Vegetation dynamics KW - Baraba forest-steppe KW - Archaeology KW - Transfer function Y1 - 2017 U6 - https://doi.org/10.1016/j.quascirev.2017.03.022 SN - 0277-3791 VL - 163 SP - 152 EP - 161 PB - Elsevier CY - Oxford ER - TY - THES A1 - Zhou, Bin T1 - On the assessment of surface urban heat island T1 - Bewertung des urbanen Hitzeinseleffekts BT - size, urban form, and seasonality BT - Stadtgröße, Stadtform, und Seasonalität N2 - Inwiefern Städte unter den Megatrends der Urbanisierung und des Klimawandels nachhaltig gestaltet werden können, bleibt umstritten. Dies ist zum Teil auf unzureichende Kenntnisse der Mensch-Umwelt-Interaktionen zurückzuführen. Als die am vollständigsten dokumentierte anthropogene Klimamodifikation ruft der Urbane Hitzeinsel (UHI) Effekt weltweit Sorgen hinsichtlich der Gesundheit der Bevölkerung hervor. Dazu kommt noch ein immer häufigeres und intensiveres Auftreten von Hitzewellen, wodurch das Wohlbefinden der Stadtbewohner weiter beeinträchtigt wird. Trotz eines deutlichen Anstiegs der Zahl der UHI-bezogenen Veröffentlichungen in den letzten Jahrzehnten haben die unterschiedlichen Definitionen von städtischen und ländlichen Gebieten in bisherigen Studien die allgemeine Vergleichbarkeit der Resultate stark erschwert. Darüber hinaus haben nur wenige Studien den UHI-Effekt und seine Einflussfaktoren anhand einer Kombination der Landnutzungsdaten und der thermischen Fernerkundung systematisch untersucht. Diese Arbeit stellt einen allgemeinen Rahmen zur Quantifizierung von UHI-Intensitäten mittels eines automatisierten Algorithmus vor, wobei Städte als Agglomerationen maximal räumlicher Kontinuität basierend auf Landnutzungsdaten identifiziert, sowie deren ländliche Umfelder analog definiert werden. Durch Verknüpfung der Landnutzungsdaten mit Landoberflächentemperaturen von Satelliten kann die UHI-Intensität robust und konsistent berechnet werden. Anhand dieser Innovation wurde nicht nur der Zusammenhang zwischen Stadtgröße und UHI-Intensität erneut untersucht, sondern auch die Auswirkungen der Stadtform auf die UHI-Intensität quantifiziert. Diese Arbeit leistet vielfältige Beiträge zum tieferen Verständnis des UHI-Phänomens. Erstens wurde eine log-lineare Beziehung zwischen UHI-Intensität und Stadtgröße unter Berücksichtigung der 5,000 europäischen Städte bestätigt. Werden kleinere Städte auch berücksichtigt, ergibt sich eine log-logistische Beziehung. Zweitens besteht ein komplexes Zusammenspiel zwischen der Stadtform und der UHI-Intensität: die Stadtgröße stellt den stärksten Einfluss auf die UHI-Intensität dar, gefolgt von der fraktalen Dimension und der Anisometrie. Allerdings zeigen ihre relativen Beiträge zur UHI-Intensität eine regionale Heterogenität, welche die Bedeutung räumlicher Muster während der Umsetzung von UHI-Anpassungsmaßnahmen hervorhebt. Des Weiteren ergibt sich eine neue Saisonalität der UHI-Intensität für individuelle Städte in Form von Hysteresekurven, die eine Phasenverschiebung zwischen den Zeitreihen der UHI-Intensität und der Hintergrundtemperatur andeutet. Diese Saisonalität wurde anhand von Luft- und Landoberflächentemperaturen untersucht, indem die Satellitenbeobachtung und die Modellierung der urbanen Grenzschicht mittels des UrbClim-Modells kombiniert wurden. Am Beispiel von London ist die Diskrepanz der Saisonalitäten zwischen den beiden Temperaturen vor allem auf die mit der einfallenden Sonnenstrahlung verbundene Besonderheit der Landoberflächentemperatur zurückzuführen. Darüber hinaus spielt das regionale Klima eine wichtige Rolle bei der Entwicklung der UHI. Diese Arbeit ist eine der ersten Studien dieser Art, die eine systematische und statistische Untersuchung des UHI-Effektes ermöglicht. Die Ergebnisse sind von besonderer Bedeutung für die allgemeine räumliche Planung und Regulierung auf Meso- und Makroebenen, damit sich Vorteile der rapiden Urbanisierung nutzbar machen und zeitgleich die folgende Hitzebelastung proaktiv vermindern lassen. N2 - To what extent cities can be made sustainable under the mega-trends of urbanization and climate change remains a matter of unresolved scientific debate. Our inability in answering this question lies partly in the deficient knowledge regarding pivotal humanenvironment interactions. Regarded as the most well documented anthropogenic climate modification, the urban heat island (UHI) effect – the warmth of urban areas relative to the rural hinterland – has raised great public health concerns globally. Worse still, heat waves are being observed and are projected to increase in both frequency and intensity, which further impairs the well-being of urban dwellers. Albeit with a substantial increase in the number of publications on UHI in the recent decades, the diverse urban-rural definitions applied in previous studies have remarkably hampered the general comparability of results achieved. In addition, few studies have attempted to synergize the land use data and thermal remote sensing to systematically assess UHI and its contributing factors. Given these research gaps, this work presents a general framework to systematically quantify the UHI effect based on an automated algorithm, whereby cities are defined as clusters of maximum spatial continuity on the basis of land use data, with their rural hinterland being defined analogously. By combining land use data with spatially explicit surface skin temperatures from satellites, the surface UHI intensity can be calculated in a consistent and robust manner. This facilitates monitoring, benchmarking, and categorizing UHI intensities for cities across scales. In light of this innovation, the relationship between city size and UHI intensity has been investigated, as well as the contributions of urban form indicators to the UHI intensity. This work delivers manifold contributions to the understanding of the UHI, which have complemented and advanced a number of previous studies. Firstly, a log-linear relationship between surface UHI intensity and city size has been confirmed among the 5,000 European cities. The relationship can be extended to a log-logistic one, when taking a wider range of small-sized cities into account. Secondly, this work reveals a complex interplay between UHI intensity and urban form. City size is found to have the strongest influence on the UHI intensity, followed by the fractality and the anisometry. However, their relative contributions to the surface UHI intensity depict a pronounced regional heterogeneity, indicating the importance of considering spatial patterns of UHI while implementing UHI adaptation measures. Lastly, this work presents a novel seasonality of the UHI intensity for individual clusters in the form of hysteresis-like curves, implying a phase shift between the time series of UHI intensity and background temperatures. Combining satellite observation and urban boundary layer simulation, the seasonal variations of UHI are assessed from both screen and skin levels. Taking London as an example, this work ascribes the discrepancies between the seasonality observed at different levels mainly to the peculiarities of surface skin temperatures associated with the incoming solar radiation. In addition, the efforts in classifying cities according to their UHI characteristics highlight the important role of regional climates in determining the UHI. This work serves as one of the first studies conducted to systematically and statistically scrutinize the UHI. The outcomes of this work are of particular relevance for the overall spatial planning and regulation at meso- and macro levels in order to harness the benefits of rapid urbanization, while proactively minimizing its ensuing thermal stress. KW - urban heat island effect KW - surface urban heat island effect KW - UHI KW - urban form KW - der Urbane Hitzeinsel Effekt KW - der Städtische Wärmeinseleffekt KW - der Urbane Hitzeinsel Effekt basierend auf Landoberflächentemperatur KW - UHI KW - die Stadtform Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-404383 ER - TY - JOUR A1 - Zhou, Bin A1 - Lauwaet, Dirk A1 - Hooyberghs, Hans A1 - De Ridder, Koen A1 - Kropp, Jürgen A1 - Rybski, Diego T1 - Assessing Seasonality in the Surface Urban Heat Island of London JF - Journal of applied meteorology and climatology N2 - This paper assesses the seasonality of the urban heat island (UHI) effect in the Greater London area (United Kingdom). Combining satellite-based observations and urban boundary layer climate modeling with the UrbClim model, the authors are able to address the seasonality of UHI intensity, on the basis of both land surface temperature (LST) and 2-m air temperature, for four individual times of the day (0130, 1030, 1330, and 2230 local time) and the daily means derived from them. An objective of this paper is to investigate whether the UHI intensities that are based on both quantities exhibit a similar hysteresis-like trajectory that is observed for LST when plotting the UHI intensity against the background temperature. The results show that the UrbClim model can satisfactorily reproduce both the observed urban rural LSTs and 2-m air temperatures as well as their differences and the hysteresis in the surface UHI. The hysteresis-like seasonality is largely absent in both the observed and modeled 2-m air temperatures, however. A sensitivity simulation of the UHI intensity to incoming solar radiation suggests that the hysteresis of the LST can mainly be attributed to the seasonal variation in incoming solar radiation. Y1 - 2016 U6 - https://doi.org/10.1175/JAMC-D-15-0041.1 SN - 1558-8424 SN - 1558-8432 VL - 55 SP - 493 EP - 505 PB - American Meteorological Soc. CY - Boston ER - TY - JOUR A1 - Zhou, Bin A1 - Rybski, Diego A1 - Kropp, Jürgen T1 - On the statistics of urban heat island intensity JF - Geophysical research letters N2 - We perform a systematic study of all cities in Europe to assess the Urban Heat Island (UHI) intensity by means of remotely sensed land surface temperature data. Defining cities as spatial clusters of urban land cover, we investigate the relationships of the UHI intensity, with the cluster size and the temperature of the surroundings. Our results show that in Europe, the UHI intensity in summer has a strong correlation with the cluster size, which can be well fitted by an empirical sigmoid model. Furthermore, we find a novel seasonality of the UHI intensity for individual clusters in the form of hysteresis-like curves. We characterize the shape and identify apparent regional patterns. Y1 - 2013 U6 - https://doi.org/10.1002/2013GL057320 SN - 0094-8276 SN - 1944-8007 VL - 40 IS - 20 SP - 5486 EP - 5491 PB - American Geophysical Union CY - Washington ER - TY - JOUR A1 - Zhou, Bin A1 - Rybski, Diego A1 - Kropp, Jürgen T1 - The role of city size and urban form in the surface urban heat island JF - Scientific reports N2 - Urban climate is determined by a variety of factors, whose knowledge can help to attenuate heat stress in the context of ongoing urbanization and climate change. We study the influence of city size and urban form on the Urban Heat Island (UHI) phenomenon in Europe and find a complex interplay between UHI intensity and city size, fractality, and anisometry. Due to correlations among these urban factors, interactions in the multi-linear regression need to be taken into account. We find that among the largest 5,000 cities, the UHI intensity increases with the logarithm of the city size and with the fractal dimension, but decreases with the logarithm of the anisometry. Typically, the size has the strongest influence, followed by the compactness, and the smallest is the influence of the degree to which the cities stretch. Accordingly, from the point of view of UHI alleviation, small, disperse, and stretched cities are preferable. However, such recommendations need to be balanced against e.g. positive agglomeration effects of large cities. Therefore, trade-offs must be made regarding local and global aims. Y1 - 2017 U6 - https://doi.org/10.1038/s41598-017-04242-2 SN - 2045-2322 VL - 7 PB - Nature Publ. Group CY - London ER - TY - JOUR A1 - Zhou, Renjie A1 - Aitchison, Jonathan C. A1 - Lokho, Kapesa A1 - Sobel, Edward A1 - Feng, Yuexing A1 - Zhao, Jian-xin T1 - Unroofing the Ladakh Batholith: constraints from autochthonous molasse of the Indus Basin, NW Himalaya JF - Journal of the Geological Society N2 - The Indus Molasse records orogenic sedimentation associated with uplift and erosion of the southern margin of Asia in the course of ongoing India-Eurasia collision. Detailed field investigation clarifies the nature and extent of the depositional contact between this molasse and the underlying basement units. We report the first dataset on detrital zircon U-Pb ages, Hf isotopes and apatite U-Pb ages for the autochthonous molasse in the Indus Suture Zone. A latest Oligocene depositional age is proposed on the basis of the youngest detrital zircon U-Pb age peak and is consistent with published biostratigraphic data. Multiple provenance indicators suggest exclusively northerly derivation with no input from India in the lowermost parts of the section. The results provide constraints on the uplift and erosion history of the Ladakh Range following the initial India-Asia collision. Y1 - 2020 U6 - https://doi.org/10.1144/jgs2019-188 SN - 0016-7649 SN - 2041-479X VL - 177 IS - 4 SP - 818 EP - 825 PB - Geological Society (London) CY - London ER - TY - JOUR A1 - Zhou, Renjie A1 - Schoenbohm, Lindsay M. A1 - Sobel, Edward A1 - Carrapa, Barbara A1 - Davis, Donald W. T1 - Sedimentary record of regional deformation and dynamics of the thick-skinned southern Puna Plateau, central Andes (26-27 degrees S) JF - Earth & planetary science letters N2 - The Puna Plateau, adjacent Eastern Cordillera and the Sierras Pampeanas of the central Andes are largely characterized by thick-skinned, basement-involved deformation. The Puna Plateau hosts similar to N-S trending bedrock ranges bounded by deep-seated reverse faults and sedimentary basins. We contribute to the understanding of thick-skinned dynamics in the Puna Plateau by constraining regional kinematics of the poorly understood southern Puna Plateau through a multidisciplinary approach. On the southeastern plateau, sandstone modal composition and detrital zircon U-Pb and apatite fission-track data from Cenozoic strata indicate basin accumulation during the late Eocene to early Oligocene (similar to 38-28 Ma). Provenance analysis reveals the existence of a regional-scale basin covering the southern Puna Plateau during late Eocene to early Oligocene time (similar to 38-28 Ma) that was sourced from both the western plateau and the eastern plateau margin and had a depocenter located to the west. Petrographic and detrital zircon U-Pb data reveal erosion of proximal western and eastern sources after 12 Ma, in mid-late Miocene time. This indicates that the regional basin was compartmentalized into small-scale depocenters by the growth of basement-cored ranges continuing into the late Miocene (similar to 12-8 Ma). We suggest that the Cenozoic history of the southern Puna Plateau records the formation of a regional basin that was possibly driven by lithospheric flexure during the late Eocene to early Oligocene, before the growth of distributed basement-cored ranges starting as early as the late Oligocene. (C) 2015 Elsevier B.V. All rights reserved. KW - Puna Plateau KW - regional deformation KW - basin analysis KW - thick-skinned deformation KW - zircon U-Pb geochronology KW - apatite fission-track thermochronology Y1 - 2016 U6 - https://doi.org/10.1016/j.epsl.2015.11.012 SN - 0012-821X SN - 1385-013X VL - 433 SP - 317 EP - 325 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Zhou, Xiqiang A1 - Chen, Daizhao A1 - Dong, Shaofeng A1 - Zhang, Yanqiu A1 - Guo, Zenghui A1 - Wei, Hengye A1 - Yu, Hao T1 - Diagenetic barite deposits in the Yurtus Formation in Tarim Basin, NW China: Implications for barium and sulfur cycling in the earliest Cambrian JF - Precambrian research N2 - Barite concretions and bands are widely distributed in black shale-chert horizons in the Yurtus Formation of Lower Cambrian in Aksu area, northwestern Tarim Basin, NW China. They mainly consist of coarse-grained anhedral to euhedral barite crystals with minor dolomites and pyrites. Petrological features indicate these concretions grew from the porewater in unconsolidated sediments at shallow burial below sediment-water interface. The slight deviation of Sr-87/Sr-86 ratios (0.7083 to 0.7090) and significant elevated delta S-34 values (56.8-76.4 parts per thousand CDT) of barite samples with respect to those of the Early Cambrian seawater further support that barite deposits precipitated from the enclosed porewater in sediment column, which evolved from the penecontemporaneous seawater with weak interaction with the host fine-grained siliciclastic sediments and highly-depleted sulfate in response to prolonged strong bacterial sulfate reduction without necessary renewal. The abundant organic matters in the basal Yurtus Formation should have facilitated developing sulfate-depleted methanogenesis zone and sulfate-methane transition zone (SMTZ) slightly after deposition. Therefore, barite deposits in the Yurtus Formation most likely resulted from diagenetic barium cycling and persistently grew from the porewater in the static SMTZ with a low sedimentation rate in the Early Cambrian. In comparison with the distribution of sedimentary barites in geological records, we tentatively proposed that a transition in diagenetic barium cycling and associated mineralization may have occurred from the Precambrian to Cambrian periods; this scenario may be causally linked to the changes in marine ecology (the advent of mesozooplankton and associated faecal pellet) and geochemistry (the increase of seawater sulfate concentration). Thus, the occurrence of diagenetic barite deposits in the Yurtus Formation implies that diagenetic barium cycling and more effective scavenging of barium from CH4- and Ba-rich porewaters within sediments might have become an nonnegligible process in continental margin areas, at least, since the earliest Cambrian, which could have significantly impacted the marine barium cycling. (C) 2015 Elsevier B.V. All rights reserved. KW - Barite concretion KW - Diagenetic barium cycling KW - Earliest Cambrian KW - Yurtus Formation KW - Tarim Basin, NW China Y1 - 2015 U6 - https://doi.org/10.1016/j.precamres.2015.03.006 SN - 0301-9268 SN - 1872-7433 VL - 263 SP - 79 EP - 87 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Zhu, Chuanbin A1 - Cotton, Fabrice A1 - Kwak, Dong-Youp A1 - Ji, Kun A1 - Kawase, Hiroshi A1 - Pilz, Marco T1 - Within-site variability in earthquake site response JF - Geophysical journal international N2 - The within-site variability in site response is the randomness in site response at a given site from different earthquakes and is treated as aleatory variability in current seismic hazard/risk analyses. In this study, we investigate the single-station variability in linear site response at K-NET and KiK-net stations in Japan using a large number of earthquake recordings. We found that the standard deviation of the horizontal-to-vertical Fourier spectral ratio at individual sites, that is single-station horizontal-to-vertical spectral ratio (HVSR) sigma sigma(HV,s), approximates the within-site variability in site response quantified using surface-to-borehole spectral ratios (for oscillator frequencies higher than the site fundamental frequency) or empirical ground-motion models. Based on this finding, we then utilize the single-station HVSR sigma as a convenient tool to study the site-response variability at 697 KiK-net and 1169 K-NET sites. Our results show that at certain frequencies, stiff, rough and shallow sites, as well as small and local events tend to have a higher sigma(HV,s). However, when being averaged over different sites, the single-station HVSR sigma, that is sigma(HV), increases gradually with decreasing frequency. In the frequency range of 0.25-25 Hz, sigma(HV) is centred at 0.23-0.43 in ln scales (a linear scale factor of 1.26-1.54) with one standard deviation of less than 0.1. sigma(HV) is quite stable across different tectonic regions, and we present a constant, as well as earthquake magnitude- and distance-dependent sigma(HV) models. KW - earthquake ground motions KW - earthquake hazards KW - site effects Y1 - 2021 U6 - https://doi.org/10.1093/gji/ggab481 SN - 0956-540X SN - 1365-246X VL - 229 IS - 2 SP - 1268 EP - 1281 PB - Oxford Univ. Press CY - Oxford ER - TY - JOUR A1 - Zhu, Chuanbin A1 - Cotton, Fabrice A1 - Pilz, Marco T1 - Testing the Depths to 1.0 and 2.5 km/s Velocity Isosurfaces in a Velocity Model for Japan and Implications for Ground-Motion Modeling JF - Bulletin of the Seismological Society of America N2 - In the Next Generation Attenuation West2 (NGA-West2) project, a 3D subsurface structure model (Japan Seismic Hazard Information Station [J-SHIS]) was queried to establish depths to 1.0 and 2.5 km/s velocity isosurfaces for sites without depth measurement in Japan. In this article, we evaluate the depth parameters in the J-SHIS velocity model by comparing them with their corresponding site-specific depth measurements derived from selected KiK-net velocity profiles. The comparison indicates that the J-SHIS model underestimates site depths at shallow sites and overestimates depths at deep sites. Similar issues were also identified in the southern California basin model. Our results also show that these underestimations and over-estimations have a potentially significant impact on ground-motion prediction using NGA-West2 ground-motion models (GMMs). Site resonant period may be considered as an alternative to depth parameter in the site term of a GMM. Y1 - 2019 U6 - https://doi.org/10.1785/0120190016 SN - 0037-1106 SN - 1943-3573 VL - 109 IS - 6 SP - 2710 EP - 2721 PB - Seismological Society of America CY - Albany ER - TY - JOUR A1 - Zhu, Chuanbin A1 - Cotton, Fabrice A1 - Pilz, Marco T1 - Detecting site resonant frequency using HVSR BT - Fourier versus response spectrum and the first versus the highest peak frequency JF - Bulletin of the Seismological Society of America : BSSA N2 - In this investigation, we examine the uncertainties using the horizontal-to-vertical spectral ratio (HVSR) technique on earthquake recordings to detect site resonant frequencies at 207 KiK-net sites. Our results show that the scenario dependence of response (pseudospectral acceleration) spectral ratio could bias the estimates of resonant frequencies for sites having multiple significant peaks with comparable amplitudes. Thus, the Fourier amplitude spectrum (FAS) should be preferred in computing HVSR. For more than 80% of the investigated sites, the first peak (in the frequency domain) on the average HVSR curve over multiple sites coincides with the highest peak. However, for sites with multiple peaks, the highest peak frequency (f(p)) is less susceptible to the selection criteria of significant peaks and the extent of smoothing to spectrum than the first peak frequency (f(0)). Meanwhile, in comparison to the surface-to-borehole spectral ratio, f(0) tends to underestimate the predominant frequency (at which the largest amplification occurs) more than f(p). In addition, in terms of characterizing linear site response, f(p) shows a better overall performance than f(0). Based on these findings, we thus recommend that seismic network operators provide f(p) on the average HVSRFAS curve as a priority, ideally together with the average HVSRFAS curve in site characterization. Y1 - 2020 U6 - https://doi.org/10.1785/0120190186 SN - 0037-1106 SN - 1943-3573 VL - 110 IS - 2 SP - 427 EP - 440 PB - Seismological Society of America CY - El Cerito, Calif. ER - TY - JOUR A1 - Zhu, Chuanbin A1 - Pilz, Marco A1 - Cotton, Fabrice T1 - Which is a better proxy, site period or depth to bedrock, in modelling linear site response in addition to the average shear-wave velocity? JF - Bulletin of earthquake engineering : official publication of the European Association for Earthquake Engineering N2 - This study aims to identify the best-performing site characterization proxy alternative and complementary to the conventional 30 m average shear-wave velocity V-S30, as well as the optimal combination of proxies in characterizing linear site response. Investigated proxies include T-0 (site fundamental period obtained from earthquake horizontal-to-vertical spectral ratios), V-Sz (measured average shear-wave velocities to depth z, z = 5, 10, 20 and 30 m), Z(0.8) and Z(1.0) (measured site depths to layers having shear-wave velocity 0.8 and 1.0 km/s, respectively), as well as Z(x-infer) (inferred site depths from a regional velocity model, x = 0.8 and 1.0, 1.5 and 2.5 km/s). To evaluate the performance of a site proxy or a combination, a total of 1840 surface-borehole recordings is selected from KiK-net database. Site amplifications are derived using surface-to-borehole response-, Fourier- and cross-spectral ratio techniques and then are compared across approaches. Next, the efficacies of 7 single-proxies and 11 proxy-pairs are quantified based on the site-to-site standard deviation of amplification residuals of observation about prediction using the proxy or the pair. Our results show that T-0 is the best-performing single-proxy among T-0, Z(0.8), Z(1.0) and V-Sz. Meanwhile, T-0 is also the best-performing proxy among T-0, Z(0.8), Z(1.0) and Z(x-infer) complementary to V-S30 in accounting for the residual amplification after V-S30-correction. Besides, T-0 alone can capture most of the site effects and should be utilized as the primary site indicator. Though (T-0, V-S30) is the best-performing proxy pair among (V-S30, T-0), (V-S30, Z(0.8)), (V-S30, Z(1.0)), (V-S30, Z(x-infer)) and (T-0, V-Sz), it is only slightly better than (T-0, V-S20). Considering both efficacy and engineering utility, the combination of T-0 (primary) and V-S20 (secondary) is recommended. Further study is needed to test the performances of various proxies on sites in deep sedimentary basins. KW - Site effects KW - Amplification KW - Site proxy KW - Surface-to-borehole spectral ratios KW - KiK-net KW - Earthquake Y1 - 2019 U6 - https://doi.org/10.1007/s10518-019-00738-6 SN - 1570-761X SN - 1573-1456 VL - 18 IS - 3 SP - 797 EP - 820 PB - Springer CY - Dordrecht ER - TY - JOUR A1 - Zhu, Chuanbin A1 - Pilz, Marco A1 - Cotton, Fabrice T1 - Evaluation of a novel application of earthquake HVSR in site-specific amplification estimation JF - Soil dynamics and earthquake engineering N2 - Ground response analyses (GRA) model the vertical propagations of SH waves through flat-layered media (1DSH) and are widely carried out to evaluate local site effects in practice. Horizontal-to-vertical spectral ratio (HVSR) technique is a cost-effective approach to extract certain site-specific information, e.g., site fundamental frequency (f(0)), but HVSR values cannot be directly used to approximate the levels of S-wave amplifications. Motivated by the work of Kawase et al. (2019), we propose a procedure to correct earthquake HVSR amplitudes for direct amplification estimations. The empirical correction compensates HVSR by generic vertical amplification spectra categorized by the vertical fundamental frequency (f(0v)) via kappa-means clustering. In this investigation, we evaluate the effectiveness of the corrected HVSR in approximating observed linear amplifications in comparison with 1DSH modellings. We select a total of 90 KiK-net (Kiban Kyoshin network) surface-downhole sites which are found to have no velocity contrasts below their boreholes and thus of which surface-to-borehole spectral ratios (SBSRs) can be taken as their empirical transfer functions (ETFs). 1DSH-based theoretical transfer functions (TTFs) are computed in the linear domain considering uncertainties in Vs profiles through randomizations. Five goodness-of-fit metrics are adopted to gauge the closeness between observed (ETF) and predicted (i.e., TTF and corrected HVSR) amplifications in both amplitude and spectral shape over frequencies from f(0) to 25 Hz. We find that the empirical correction to HVSR is highly effective and achieves a "good match" in both spectral shape and amplitude at the majority of the 90 KiK-net sites, as opposed to less than one-third for the 1DSH modelling. In addition, the empirical correction does not require a velocity model, which GRAs require, and thus has great potentials in seismic hazard assessments. KW - site amplification KW - HVSR KW - ground response analysis KW - KiK-net KW - earthquake Y1 - 2020 U6 - https://doi.org/10.1016/j.soildyn.2020.106301 SN - 0267-7261 SN - 1879-341X VL - 139 PB - Elsevier CY - Oxford ER - TY - JOUR A1 - Zhu, Hui A1 - Chen, Lunjin A1 - Liu, Xu A1 - Shprits, Yuri Y. T1 - Modulation of locally generated equatorial noise by ULF wave JF - Journal of geophysical research : Space physics N2 - In this paper we report a rare and fortunate event of fast magnetosonic (MS, also called equatorial noise) waves modulated by compressional ultralow frequency (ULF) waves measured by Van Allen Probes. The characteristics of MS waves, ULF waves, proton distribution, and their potential correlations are analyzed. The results show that ULF waves can modulate the energetic ring proton distribution and in turn modulate the MS generation. Furthermore, the variation of MS intensities is attributed to not only ULF wave activities but also the variation of background parameters, for example, number density. The results confirm the opinion that MS waves are generated by proton ring distribution and propose a new modulation phenomenon. Y1 - 2019 U6 - https://doi.org/10.1029/2018JA026199 SN - 2169-9380 SN - 2169-9402 VL - 124 IS - 4 SP - 2779 EP - 2787 PB - American Geophysical Union CY - Washington ER - TY - JOUR A1 - Zhu, Hui A1 - Shprits, Yuri Y. A1 - Chen, Lunjin A1 - Liu, Xu A1 - Kellerman, Adam C. T1 - An event on simultaneous amplification of exohiss and chorus waves associated with electron density enhancements JF - Journal of geophysical research : Space physics N2 - Whistler mode exohiss are the structureless hiss waves observed outside the plasma pause with featured equatorward Poynting flux. An event of the amplification of exohiss as well as chorus waves was recorded by Van Allen Probes during the recovery phase of a weak geomagnetic storm. Amplitudes of both types of the waves showed a significant increase at the regions of electron density enhancements. It is found that the electrons resonant with exohiss and chorus showed moderate pitch angle anisotropies. The ratio of the number of electrons resonating with exohiss to total electron number presented in-phase correlation with density variations, which suggests that exohiss can be amplified due to electron density enhancement in terms of cyclotron instability. The calculation of linear growth rates further supports above conclusion. We suggest that exohiss waves have potential to become more significant due to the background plasma fluctuation. Y1 - 2018 U6 - https://doi.org/10.1029/2017JA025023 SN - 2169-9380 SN - 2169-9402 VL - 123 IS - 11 SP - 8958 EP - 8968 PB - American Geophysical Union CY - Washington ER - TY - JOUR A1 - Zhu, Zhennan A1 - Tian, Hong A1 - Kempka, Thomas A1 - Jiang, Guosheng A1 - Dou, Bin A1 - Mei, Gang T1 - Mechanical behaviors of granite after thermal treatment under loading and unloading conditions JF - Natural resources research / sponsored by the International Association for Mathematical Geology N2 - Understanding the mechanical behaviors of granite after thermal treatment under loading and unloading conditions is of utmost relevance to deep geothermal energy recovery. In the present study, a series of loading and unloading triaxial compression tests (20, 40 and 60 MPa) on granite specimens after exposure to different temperatures (20, 200, 300, 400, 500 and 600 degrees C) was carried out to quantify the combined effects of thermal treatment and loading/unloading stress conditions on granite strength and deformation. Changes in the microstructure of granite exposed to high temperatures were revealed by optical microscopy. The experimental results indicate that both, thermal treatment and loading/unloading stress conditions, degrade the mechanical behaviors and further decrease the carrying capacity of granite. The gradual degradation of the mechanical characteristics of granite after thermal treatment is mainly associated with the evolution of thermal micro-cracks based on optical microscopy observations. The unloading stress state induces the extension of tension cracks parallel to the axial direction, and thus, the mechanical properties are degraded. Temperatures above 400 degrees C have a more significant influence on the mechanical characteristics of granite than the unloading treatment, whereby 400 degrees C can be treated as a threshold temperature for the delineation of significant deterioration. This study is expected to support feasibility and risk assessments by means of providing data for analytical calculations and numerical simulations on granite exposed to high temperatures during geothermal energy extraction. KW - Granite KW - Thermal treatment KW - Unloading KW - Mechanical properties KW - Micro-structure Y1 - 2021 U6 - https://doi.org/10.1007/s11053-021-09815-7 SN - 1520-7439 SN - 1573-8981 VL - 30 IS - 3 SP - 2733 EP - 2752 PB - Springer Science + Business Media B.V. CY - New York, NY [u.a.] ER - TY - JOUR A1 - Zhuang, Guangsheng A1 - Johnstone, Samuel A. A1 - Hourigan, Jeremy A1 - Ritts, Bradley A1 - Robinson, Alexander A1 - Sobel, Edward T1 - Understanding the geologic evolution of Northern Tibetan Plateau with multiple thermochronometers JF - Gondwana research : international geoscience journal ; official journal of the International Association for Gondwana Research N2 - The early onset of deformation following the India-Asia collision, Neogene expanse of uplift, and complex systems that comprise strike-slip faults, thrust faults, and intermontane basins characterize the Cenozoic tectonism of Northern Tibetan Plateau and raise two prominent questions in orogenic geodynamics: 1) What mechanism(s) control(s) the transfer of stress related to the India-Asia collision across the distance of >2000 km; and 2) Why the development of high topography was delayed in the Northern Tibetan Plateau and what does it reveal about how the internal forces and external boundary conditions evolved. To address these two questions, we reconstruct a holistic spatial-temporal deformation history of the Northern Tibetan Plateau by using a range of thermochronometers, with closure temperature spanning from 350 degrees C to-60-70 degrees C. This multi-thermochronometer study reveals three stages of faulting related cooling, in the early Cretaceous, in Paleocene-Eocene and in middle-late Miocene. We observe that Paleocene-Eocene deformation was spatially restricted and mostly occurred on reactivated Cretaceous structures, indicating a control of pre-existing weakness on early Cenozoic deformation. Extensive Neogene deformation contrasts with restricted Paleocene-Eocene deformation and relatively quiescent shortening during the Oligocene-early Miocene, which implies a change in the regional tectonics regime. Global plate reconstructions show that this tectonic reorganization is coeval with an increase in Pacific-Asia plate convergence rates. We argue that this change in regional tectonics is a result of increasing constrictive environment of the eastern plate boundary, which changed the behavior of the Altyn Tagh fault the boundary fault of Northern Tibetan Plateau, causing it to change from feeding slip into structures out of the plateau to feeding slip into structures at plateau margins. KW - Northern Tibetan Plateau KW - Thermochronology KW - Altyn Tagh Fault KW - Pacific-Asia convergence KW - Gravitational potential energy Y1 - 2018 U6 - https://doi.org/10.1016/j.gr.2018.02.014 SN - 1342-937X SN - 1878-0571 VL - 58 SP - 195 EP - 210 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Zibulski, Romy A1 - Herzschuh, Ulrike A1 - Pestryakova, Luidmila Agafyevna T1 - Vegetation patterns along micro-relief and vegetation type transects in polygonal landscapes of the Siberian Arctic JF - Journal of vegetation science N2 - QuestionHow important is the effect of micro-relief and vegetation type on the characteristics of vascular plants and bryophytes in low-centred polygons? LocationSiberian Arctic, Russia. MethodsEight low-centred polygons in northern Siberia were surveyed for vegetation along transects running from the rim to the pond via the rim-pond transition of each polygon and across a vegetation type gradient from open forest to tundra. ResultsThe cover of vascular plants and bryophytes displays no significant differences between the rim and rim-pond transition but is significantly lower in the pond section of the polygons. Alpha-diversity of vascular plants decreases strongly from rim to pond, whereas bryophyte diversity in pond plots is significantly distinct from the rim and the rim-pond transition. There is no clear trend in cover for either plant group along the vegetation type transect and only a weak trend in -diversity. However, both gradients are reflected in the compositional turnover. The applied indicator species analysis identified taxa characteristic of certain environmental conditions. Among others, we found vascular plants primarily characteristic of the rim and bryophyte taxa characteristic of each micro-relief level and vegetation type. ConclusionsThe observed gradual pattern in -diversity and composition of polygonal vegetation suggests that micro-relief is the main driver of changes in the vegetation composition, while vegetation type and the related forest cover change are of subordinate importance for polygonal vegetation patterns along the Siberian tree line. KW - Bryophytes KW - Indicator species KW - Low-centred polygon KW - NMDS KW - Russia KW - Tree line KW - Tundra KW - Vascular plants Y1 - 2016 U6 - https://doi.org/10.1111/jvs.12356 SN - 1100-9233 SN - 1654-1103 VL - 27 SP - 377 EP - 386 PB - Wiley-Blackwell CY - Hoboken ER - TY - JOUR A1 - Zibulski, Romy A1 - Herzschuh, Ulrike A1 - Pestryakova, Luidmila Agafyevna A1 - Wolter, Juliane A1 - Mueller, S. A1 - Schilling, N. A1 - Wetterich, Sebastian A1 - Schirrmeister, Lutz A1 - Tian, Fang T1 - River flooding as a driver of polygon dynamics: modern vegetation data and a millennial peat record from the Anabar River lowlands (Arctic Siberia) JF - Biogeosciences N2 - The spatial and temporal variability of a low-centred polygon on the eastern floodplain area of the lower Anabar River (72.070 degrees N, 113.921 degrees E; northern Yakutia, Siberia) has been investigated using a multi-method approach. The present-day vegetation in each square metre was analysed, revealing a community of Larix, shrubby Betula, and Salix on the polygon rim, a dominance of Carex and Andromeda polifolia in the rim-to-pond transition zone, and a predominantly monospecific Scorpidium scorpioides coverage within the pond. The total organic carbon (TOC) content, TOC/TN (total nitrogen) ratio, grain size, vascular plant macrofossils, moss remains, diatoms, and pollen were analysed for two vertical sections and a sediment core from a transect across the polygon. Radiocarbon dating indicates that the formation of the polygon started at least 1500 yr ago; the general positions of the pond and rim have not changed since that time. Two types of pond vegetation were identified, indicating two contrasting development stages of the polygon. The first was a well-established moss association, dominated by submerged or floating Scorpidium scorpioides and/or Drepanocladus spp. and overgrown by epiphytic diatoms such as Tabellaria flocculosa and Eunotia taxa. This stage coincides temporally with a period in which the polygon was only drained by lateral subsurface water flow, as indicated by mixed grain sizes. A different moss association occurred during times of repeated river flooding (indicated by homogeneous medium-grained sand that probably accumulated during the annual spring snowmelt), characterized by an abundance of Meesia triquetra and a dominance of benthic diatoms (e. g. Navicula vulpina), indicative of a relatively high pH and a high tolerance of disturbance. A comparison of the local polygon vegetation (inferred from moss and macrofossil spectra) with the regional vegetation (inferred from pollen spectra) indicated that the moss association with Scorpidium scorpioides became established during relatively favourable climatic conditions, while the association dominated by Meesia triquetra occurred during periods of harsh climatic conditions. Our study revealed a strong riverine influence (in addition to climatic influences) on polygon development and the type of peat accumulated. Y1 - 2013 U6 - https://doi.org/10.5194/bg-10-5703-2013 SN - 1726-4170 VL - 10 IS - 8 SP - 5703 EP - 5728 PB - Copernicus CY - Göttingen ER - TY - JOUR A1 - Ziebarth, Malte J. A1 - von Specht, Sebastian A1 - Heidbach, Oliver A1 - Cotton, Fabrice A1 - Anderson, John G. T1 - Applying conservation of energy to estimate earthquake frequencies from strain rates and stresses JF - Journal of geophysical research : Solid earth N2 - Estimating earthquake occurrence rates from the accumulation rate of seismic moment is an established tool of seismic hazard analysis. We propose an alternative, fault-agnostic approach based on the conservation of energy: the Energy-Conserving Seismicity Framework (ENCOS). Working in energy space has the advantage that the radiated energy is a better predictor of the damage potential of earthquake waves than the seismic moment release. In a region, ENCOS balances the stationary power available to cause earthquakes with the long-term seismic energy release represented by the energy-frequency distribution's first moment. Accumulation and release are connected through the average seismic efficiency, by which we mean the fraction of released energy that is converted into seismic waves. Besides measuring earthquakes in energy, ENCOS differs from moment balance essentially in that the energy accumulation rate depends on the total stress in addition to the strain rate tensor. To validate ENCOS, we exemplarily model the energy-frequency distribution around Southern California. We estimate the energy accumulation rate due to tectonic loading assuming poroelasticity and hydrostasis. Using data from the World Stress Map and assuming the frictional limit to estimate the stress tensor, we obtain a power of 0.8 GW. The uncertainty range, 0.3-2.0GW, originates mainly from the thickness of the seismogenic crust, the friction coefficient on preexisting faults, and models of Global Positioning System (GPS) derived strain rates. Based on a Gutenberg-Richter magnitude-frequency distribution, this power can be distributed over a range of energies consistent with historical earthquake rates and reasonable bounds on the seismic efficiency. Y1 - 2020 U6 - https://doi.org/10.1029/2020JB020186 SN - 2169-9313 SN - 2169-9356 VL - 125 IS - 8 PB - American Geophysical Union CY - Washington ER - TY - THES A1 - Ziegler, Moritz O. T1 - The 3D in-situ stress field and its changes in geothermal reservoirs T1 - Das 3D in-situ Spannungsfeld und seine Änderungen in Geothermiereservoiren N2 - Information on the contemporary in-situ stress state of the earth’s crust is essential for geotechnical applications and physics-based seismic hazard assessment. Yet, stress data records for a data point are incomplete and their availability is usually not dense enough to allow conclusive statements. This demands a thorough examination of the in-situ stress field which is achieved by 3D geomechanicalnumerical models. However, the models spatial resolution is limited and the resulting local stress state is subject to large uncertainties that confine the significance of the findings. In addition, temporal variations of the in-situ stress field are naturally or anthropogenically induced. In my thesis I address these challenges in three manuscripts that investigate (1) the current crustal stress field orientation, (2) the 3D geomechanical-numerical modelling of the in-situ stress state, and (3) the phenomenon of injection induced temporal stress tensor rotations. In the first manuscript I present the first comprehensive stress data compilation of Iceland with 495 data records. Therefore, I analysed image logs from 57 boreholes in Iceland for indicators of the orientation of the maximum horizontal stress component. The study is the first stress survey from different kinds of stress indicators in a geologically very young and tectonically active area of an onshore spreading ridge. It reveals a distinct stress field with a depth independent stress orientation even very close to the spreading centre. In the second manuscript I present a calibrated 3D geomechanical-numerical modelling approach of the in-situ stress state of the Bavarian Molasse Basin that investigates the regional (70x70x10km³) and local (10x10x10km³) stress state. To link these two models I develop a multi-stage modelling approach that provides a reliable and efficient method to derive from the larger scale model initial and boundary conditions for the smaller scale model. Furthermore, I quantify the uncertainties in the models results which are inherent to geomechanical-numerical modelling in general and the multi-stage approach in particular. I show that the significance of the models results is mainly reduced due to the uncertainties in the material properties and the low number of available stress magnitude data records for calibration. In the third manuscript I investigate the phenomenon of injection induced temporal stress tensor rotation and its controlling factors. I conduct a sensitivity study with a 3D generic thermo-hydro-mechanical model. I show that the key control factors for the stress tensor rotation are the permeability as the decisive factor, the injection rate, and the initial differential stress. In particular for enhanced geothermal systems with a low permeability large rotations of the stress tensor are indicated. According to these findings the estimation of the initial differential stress in a reservoir is possible provided the permeability is known and the angle of stress rotation is observed. I propose that the stress tensor rotations can be a key factor in terms of the potential for induced seismicity on pre-existing faults due to the reorientation of the stress field that changes the optimal orientation of faults. N2 - Kenntnis des derzeitigen in-situ Spannungszustandes der Erdkruste ist essenziell für geotechnische Anwendungen und seismische Gefährdungsabschätzungen, welche auf physikalischen Beobachtungen basieren. Jedoch sind die Spannungsinformationen jedes Datenpunktes unvollständig und die Menge an vorhandenen Datenpunkten ist normalerweise nicht groß genug, um schlüssige Ergebnisse zu erzielen. Daher ist eine eingehende Untersuchung des in-situ Spannungsfeldes, welche durch 3D geomechanisch-numerische Modellierung geleistet wird, erforderlich. Jedoch ist die räumliche Auflösung der Modelle begrenzt und der resultierende Spannungszustand ist großen Unsicherheiten unterworfen, welche die Aussagekraft der Ergebnisse beschränken. Zusätzlich gibt es zeitliche Änderungen des Spannungsfeldes, welche durch natürliche Prozesse bedingt oder menschengemacht sind. In meiner Dissertation behandle ich diese Herausforderungen in drei Manuskripten, welche (1) die Orientierung des derzeitigen Spannungszustandes, (2) die 3D geomechanisch-numerische Modellierung des in-situ Spannungszustandes und (3) das Phänomen injektionsinduzierter zeitlicher Rotationen des Spannungstensors zum Thema haben. In dem ersten Manuskript präsentiere ich die erste umfassende Spannungsdatensammlung von Island mit insgesamt 495 Einträgen. Dafür habe ich Bilddatenlogs aus 57 Bohrlöchern in Island auf Indikatoren der maximalen horizontalen Spannungsorientierung hin untersucht. Diese Studie ist die erste ganzheitliche Spannungsuntersuchung, welche sich auf verschiedene Indikatoren der Spannungsorientierung stützt und in einem geologisch sehr jungen und tektonisch aktiven Gebiet auf einem Mittelozeanischen Rücken an Land liegt. Es zeigt sich, dass selbst sehr nahe an der Plattengrenze eine tiefenunabhängige, eindeutige Spannungsorientierung existiert. In dem zweiten Manuskript präsentiere ich einen kalibrierten 3D geomechanisch-numerischen Modellierungsansatz des in-situ Spannungszustandes des bayrischen Molassebeckens welches den regionalen (70x70x10km³) und den lokalen (10x10x10km³) Spannungszustand untersucht. Um diese zwei Modelle zu verbinden, habe ich ein mehrstufigen Modellansatz entworfen, welcher eine zuverlässige und effiziente Methode darstellt um Randbedingungen und Initialbedingungen für das kleinere Modell aus dem größeren Modell abzuleiten. Des Weiteren quantifiziere ich die Unsicherheiten in den Modellergebnissen, welche im Allgemeinen durch geomechanisch-numerische Modellierung und im Speziellen durch den Mehrstufenansatz entstehen. Ich zeige, dass die Signifikanz der Modellergebnisse hauptsächlich durch die Unsicherheiten in den Materialeigenschaften sowie der geringen Anzahl vorhandener Spannungsmagnitudendaten zur Kalibrierung reduziert wird. In dem dritten Manuskript untersuche ich das Phänomen injektionsinduzierter zeitlicher Rotationen des Spannungstensors und deren kontrollierende Parameter. Ich führe eine Sensitivitätsanalyse mit einem generischen 3D thermo-hydro-mechanischen Modell durch. Darin zeige ich, dass die Schlüsselparameter, welche die Rotationen des Spannungstensors kontrollieren, die Permeabilität des Reservoirgesteins als der entscheidende Faktor, die Injektionsrate und die initiale Differenzspannung sind. Insbesondere für geothermische Systeme nach dem Hot-Dry-Rock-Verfahren mit einer geringen Permeabilität weisen die Ergebnisse auf große Rotationen des Spannungstensors hin. Gemäß diesen Ergebnissen kann die initiale Differenzspannung in einem Reservoir abgeschätzt werden, sollte die Permeabilität bekannt sein und der Winkel der Spannungsrotation beobachtet werden. Ich schlage vor, dass Spannungsrotationen ein Schlüsselfaktor in Bezug auf das Potenzial für induzierte Seismizität sind, welche auf prä-existierenden Störungen entsteht, die durch die Reorientierung des Spannungsfeldes optimal orientiert werden. KW - stress KW - stress changes KW - induced seismicity KW - geothermal KW - geomechanical modelling KW - Spannung KW - Spannungsänderungen KW - induzierte Seismizität KW - Geothermie KW - geomechanische Modellierung Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-403838 ER - TY - JOUR A1 - Ziegler, Moritz O. A1 - Heidbach, Oliver A1 - Reinecker, John A1 - Przybycin, Anna M. A1 - Scheck-Wenderoth, Magdalena T1 - A multi-stage 3-D stress field modelling approach exemplified in the Bavarian Molasse Basin JF - Solid earth Y1 - 2016 U6 - https://doi.org/10.5194/se-7-1365-2016 SN - 1869-9510 SN - 1869-9529 VL - 7 SP - 1365 EP - 1382 PB - Copernicus CY - Göttingen ER - TY - JOUR A1 - Ziegler, Moritz O. A1 - Heidbach, Oliver A1 - Zang, Arno A1 - Martinez-Garzon, Patricia A1 - Bohnhoff, Marco T1 - Estimation of the differential stress from the stress rotation angle in low permeable rock JF - Geophysical research letters N2 - Rotations of the principal stress axes are observed as a result of fluid injection into reservoirs. We use a generic, fully coupled 3-D thermo-hydro-mechanical model to investigate systematically the dependence of this stress rotation on different reservoir properties and injection scenarios. We find that permeability, injection rate, and initial differential stress are the key factors, while other reservoir properties only play a negligible role. In particular, we find that thermal effects do not significantly contribute to stress rotations. For reservoir types with usual differential stress and reservoir treatment the occurrence of significant stress rotations is limited to reservoirs with a permeability of less than approximately 10(-12)m(2). Higher permeability effectively prevents stress rotations to occur. Thus, according to these general findings, the observed principal stress axes rotation can be used as a proxy of the initial differential stress provided that rock permeability and fluid injection rate are known a priori. Y1 - 2017 U6 - https://doi.org/10.1002/2017GL073598 SN - 0094-8276 SN - 1944-8007 VL - 44 SP - 6761 EP - 6770 PB - American Geophysical Union CY - Washington ER - TY - JOUR A1 - Ziegler, Moritz O. A1 - Rajabi, Mojtaba A1 - Heidbach, Oliver A1 - Hersir, Gylfi Pall A1 - Agustsson, Kristjan A1 - Arnadottir, Sigurveig A1 - Zang, Arno T1 - The stress pattern of Iceland JF - Tectonophysics : international journal of geotectonics and the geology and physics of the interior of the earth N2 - Iceland is located on the Mid-Atlantic Ridge which is the plate boundary between the Eurasian and the North American plates. It is one of the few places on earth where an active spreading centre is located onshore but the stress pattern has not been extensively investigated so far. In this paper we present a comprehensive compilation of the orientation of maximum horizontal stress (S-Hmax). In particular we interpret borehole breakouts and drilling induced fractures from borehole image logs in 57 geothermal wells onshore Iceland. The borehole results are combined with other stress indicators including earthquake focal mechanism solutions, geological information and overcoring measurements resulting in a dataset with 495 data records for the S-Hmax orientation. The reliability of each indicator is assessed according to the quality criteria of the World Stress Map project The majority of S-Hmax orientation data records in Iceland is derived from earthquake focal mechanism solutions (35%) and geological fault slip inversions (26%). 20% of the data are borehole related stress indicators. In addition minor shares of S-Hmax orientations are compiled, amongst others, from focal mechanism inversions and the alignment of fissure eruptions. The results show that the S-Hmax orientations derived from different depths and stress indicators are consistent with each other. The resulting pattern of the present-day stress in Iceland has four distinct subsets of S-Hmax orientations. The S-Hmax orientation is parallel to the rift axes in the vicinity of the active spreading regions. It changes from NE-SW in the South to approximately N-S in central Iceland and NNW-SSE in the North. In the Westfjords which is located far away from the ridge the regional S-Hmax rotates and is parallel to the plate motion. (C) 2016 Elsevier B.V. All rights reserved. KW - Iceland KW - Stress field KW - Stress pattern KW - Borehole image logs Y1 - 2016 U6 - https://doi.org/10.1016/j.tecto.2016.02.008 SN - 0040-1951 SN - 1879-3266 VL - 674 SP - 101 EP - 113 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Ziegler, Moritz O. A1 - Reiter, Karsten A1 - Heidbach, Oliver A1 - Zang, Arno A1 - Kwiatek, Grzegorz A1 - Stromeyer, Dietrich A1 - Dahm, Torsten A1 - Dresen, Georg A1 - Hofmann, Gerhard T1 - Mining-Induced Stress Transfer and Its Relation to a 1.9 Seismic Event in an Ultra-deep South African Gold Mine JF - Pure and applied geophysics N2 - On 27 December 2007, a 1.9 seismic event occurred within a dyke in the deep-level Mponeng Gold Mine, South Africa. From the seismological network of the mine and the one from the Japanese-German Underground Acoustic Emission Research in South Africa (JAGUARS) group, the hypocentral depth (3,509 m), focal mechanism and aftershock location were estimated. Since no mining activity took place in the days before the event, dynamic triggering due to blasting can be ruled out as the cause. To investigate the hypothesis that stress transfer, due to excavation of the gold reef, induced the event, we set up a small-scale high-resolution three-dimensional (3D) geomechanical numerical model. The model consisted of the four different rock units present in the mine: quartzite (footwall), hard lava (hanging wall), conglomerate (gold reef) and diorite (dykes). The numerical solution was computed using a finite-element method with a discretised mesh of approximately elements. The initial stress state of the model is in agreement with in situ data from a neighbouring mine, and the step-wise excavation was simulated by mass removal from the gold reef. The resulting 3D stress tensor and its changes due to mining were analysed based on the Coulomb failure stress changes on the fault plane of the event. The results show that the seismic event was induced regardless of how the Coulomb failure stress changes were calculated and of the uncertainties in the fault plane solution. We also used the model to assess the seismic hazard due to the excavation towards the dyke. The resulting curve of stress changes shows a significant increase in the last in front of the dyke, indicating that small changes in the mining progress towards the dyke have a substantial impact on the stress transfer. KW - Induced seismicity KW - static stress change KW - deep-level mining KW - tabular mining KW - Coulomb failure stress KW - 3D geomechanical numerical model Y1 - 2015 U6 - https://doi.org/10.1007/s00024-015-1033-x SN - 0033-4553 SN - 1420-9136 VL - 172 IS - 10 SP - 2557 EP - 2570 PB - Springer CY - Basel ER - TY - JOUR A1 - Zielke, Olaf A1 - Strecker, Manfred T1 - Recurrence of large earthquakes in magmatic continental rifts : insights from a paleoseismic study along the Laikipia-Marmanet Fault, Subukia Valley, Kenya Rift N2 - The seismicity of the Kenya rift is characterized by high-frequency low-magnitude events concentrated along the rift axis. Its seismic character is typical for magmatically active continental rifts, where igneous material at a shallow depth causes extensive grid faulting and geothermal activity. Thermal overprinting and dike intrusion prohibit the buildup of large elastic strains, therefore prohibiting the generation of large-magnitude earthquakes. On 6 January 1928, the M-S 6.9 Subukia earthquake occurred on the Laikipia-Marmanet fault, the eastern rift-bounding structure of the central Kenya rift. It is the largest instrumentally recorded seismic event in the Kenya rift, standing in contrast to the current model of the rift's seismic character in which large earthquakes are not anticipated. Furthermore, the proximity of the ruptured fault and the rift axis is intriguing: The rift-bounding structure that ruptured in 1928 remains seismically active, capable of generating large-magnitude earthquakes, even though thermally weakened crust and better oriented structures are present along the rift axis nearby, prohibiting any significant buildup of elastic strain. We excavated the surface rupture of the 1928 Subukia earthquake to find evidence for preceding ground-rupturing earthquakes. We also made a total station survey of the site topography and mapped the site geology. We show that the Laikipia-Marmanet fault was repeatedly activated during the late Quaternary. We found evidence for six ground-rupturing earthquakes, including the 1928 earthquake. The topographic survey around the trench site revealed a degraded fault scarp of approximate to 7.5 m in height, offsetting a small debris slide. Using scarp-diffusion modeling, we estimated an uplift rate of U = 0.09-0.15 mm/yr, constraining the scarp age to 50-85 ka. Assuming an average fault dip of 55 degrees-75 degrees, the preferred uplift rate (0.15 mm/yr) accommodates approximately 10%-20% of the recent rate of extension (0.5 mm/yr) across the Kenya rift. Y1 - 2009 UR - http://bssa.geoscienceworld.org/ U6 - https://doi.org/10.1785/0120080015 SN - 0037-1106 ER - TY - JOUR A1 - Ziemann, Martin Andreas T1 - In situ micro-Raman spectroscopy on minerals on-site in the Grotto Hall of the New Palace, Park Sanssouci, in Potsdam JF - Journal of Raman spectroscopy : JRS N2 - Questions of identity and provenance of minerals that are parts of masterpieces in museums have become increasingly important in mineralogical and historical studies. Detailed investigations of valuable and unique objects require on-site, nondestructive and noninvasive methods because touching or removing them may cause irreparable damage. A mobile Raman-microprobe has been used to meet these demands for truly in situ mineralogical studies of the large collection of minerals and rocks of the Prussian kings in the Grotto Hall (Grottensaal) of the New Palace (Neues Palais), Park Sanssouci in Potsdam. Minerals on the walls of the Grotto Hall were analyzed to identify them and thereby to complete the data bank of the collection. Fluid and solid inclusions in the interior of a large quartz crystal have been studied to provide evidence of the provenance of the crystal. The fluid inclusions contain aqueous saline solutions, whereas the solid inclusions are needles of anhydrite with a length of about 1.5 mm. The quartz probably originated from an area in the eastern Alps, from the surroundings of Bad Gastein, Austria. This is the first on-site and in situ study of inclusions below the surface of a mineral with a mobile Raman-microprobe outside a laboratory. KW - mobile Raman-microprobe KW - minerals KW - provenance KW - fluid inclusions KW - anhydrite inclusions Y1 - 2006 U6 - https://doi.org/10.1002/jrs.1584 SN - 0377-0486 VL - 37 IS - 10 SP - 1019 EP - 1025 PB - Wiley CY - Chichester ER -