TY - GEN A1 - Dommain, René A1 - Andama, Morgan A1 - McDonough, Molly M. A1 - Prado, Natalia A. A1 - Goldhammer, Tobias A1 - Potts, Richard A1 - Maldonado, Jesús E. A1 - Nkurunungi, John Bosco A1 - Campana, Michael G. T1 - The Challenges of Reconstructing Tropical Biodiversity With Sedimentary Ancient DNA BT - A 2200-Year-Long Metagenomic Record From Bwindi Impenetrable Forest, Uganda T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Sedimentary ancient DNA has been proposed as a key methodology for reconstructing biodiversity over time. Yet, despite the concentration of Earth’s biodiversity in the tropics, this method has rarely been applied in this region. Moreover, the taphonomy of sedimentary DNA, especially in tropical environments, is poorly understood. This study elucidates challenges and opportunities of sedimentary ancient DNA approaches for reconstructing tropical biodiversity. We present shotgun-sequenced metagenomic profiles and DNA degradation patterns from multiple sediment cores from Mubwindi Swamp, located in Bwindi Impenetrable Forest (Uganda), one of the most diverse forests in Africa. We describe the taxonomic composition of the sediments covering the past 2200 years and compare the sedimentary DNA data with a comprehensive set of environmental and sedimentological parameters to unravel the conditions of DNA degradation. Consistent with the preservation of authentic ancient DNA in tropical swamp sediments, DNA concentration and mean fragment length declined exponentially with age and depth, while terminal deamination increased with age. DNA preservation patterns cannot be explained by any environmental parameter alone, but age seems to be the primary driver of DNA degradation in the swamp. Besides degradation, the presence of living microbial communities in the sediment also affects DNA quantity. Critically, 92.3% of our metagenomic data of a total 81.8 million unique, merged reads cannot be taxonomically identified due to the absence of genomic references in public databases. Of the remaining 7.7%, most of the data (93.0%) derive from Bacteria and Archaea, whereas only 0–5.8% are from Metazoa and 0–6.9% from Viridiplantae, in part due to unbalanced taxa representation in the reference data. The plant DNA record at ordinal level agrees well with local pollen data but resolves less diversity. Our animal DNA record reveals the presence of 41 native taxa (16 orders) including Afrotheria, Carnivora, and Ruminantia at Bwindi during the past 2200 years. Overall, we observe no decline in taxonomic richness with increasing age suggesting that several-thousand-year-old information on past biodiversity can be retrieved from tropical sediments. However, comprehensive genomic surveys of tropical biota need prioritization for sedimentary DNA to be a viable methodology for future tropical biodiversity studies. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 970 KW - sedimentary ancient DNA KW - tropical biodiversity KW - DNA preservation KW - sediment KW - tropical swamp KW - shotgun sequencing KW - metagenomic analysis Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-474305 SN - 1866-8372 IS - 970 ER - TY - THES A1 - Milewski, Robert T1 - Potential of optical remote sensing for the analysis of salt pan environments N2 - Salt pans also termed playas are common landscape features of hydrologically closed basins in arid and semiarid zones, where evaporation significantly exceeds the local precipitation. The analysis and monitoring of salt pan environments is important for the evaluation of current and future impact of these landscape features. Locally, salt pans have importance for the ecosystem, wildlife and human health, and through dust emissions they influence the climate on regional and global scales. Increasing economic exploitation of these environments in the last years, e.g. by brine extraction for raw materials, as well as climate change severely affect the water, material and energy balance of these systems. Optical remote sensing has the potential to characterise salt pan environments and to increase the understanding of processes in playa basins, as well as to assess wider impacts and feedbacks that exist between climate forcing and human intervention in their regions. Remote sensing techniques can provide information for extensive regions on a high temporal basis compared to traditional field samples and ground observations. Specifically, for salt pans that are often challenging to study because of their large size, remote location, and limited accessibility due to missing infrastructure and ephemeral flooding. Furthermore, the availability of current and upcoming hyperspectral remote sensing data opened the opportunity for the analyses of the complex reflectance signatures that relate to the mineralogical mixtures found in the salt pan sediments. However, these new advances in sensor technology, as well as increased data availability currently have not been fully explored for the study of salt pan environments. The potential of new sensors needs to be assessed and state of the art methods need to be adapted and improved to provide reliable information for in depth analysis of processes and characterisation of the recent condition, as well as to support long-term monitoring and to evaluate environmental impacts of changing climate and anthropogenic activity. This thesis provides an assessment of the capabilities of optical remote sensing for the study of salt pan environments that combines the information of hyperspectral data with the increased temporal coverage of multispectral observations for a more complete understanding of spatial and temporal complexity of salt pan environments using the Omongwa salt pan located in the south-west Kalahari as a test site. In particular, hyperspectral data are used for unmixing of the mineralogical surface composition, spectral feature-based modelling for quantification of main crust components, as well as time-series based classification of multispectral data for the assessment of the long-term dynamic and the analysis of the seasonal process regime. The results show that the surface of the Omongwa pan can be categorized into three major crust types based on diagnostic absorption features and mineralogical ground truth data. The mineralogical crust types can be related to different zones of surface dynamic as well as pan morphology that influences brine flow during the pan inundation and desiccation cycles. Using current hyperspectral imagery, as well as simulated data of upcoming sensors, robust quantification of the gypsum component could be derived. For the test site the results further indicate that the crust dynamic is mainly driven by flooding events in the wet season, but it is also influenced by temperature and aeolian activity in the dry season. Overall, the scientific outcomes show that optical remote sensing can provide a wide range of information helpful for the study of salt pan environments. The thesis also highlights that remote sensing approaches are most relevant, when they are adapted to the specific site conditions and research scenario and that upcoming sensors will increase the potential for mineralogical, sedimentological and geomorphological analysis, and will improve the monitoring capabilities with increased data availability. N2 - Salzpfannen, auch Playas genannt, sind häufige Landschaftsformen endorheischer Becken in ariden und semi-ariden Zonen, in denen die Evaporation den lokalen Niederschlag deutlich übersteigt. Die Analyse und das Monitoring von Salzpfannen sind wichtig für die Bewertung des aktuellen und zukünftigen Wandels dieser Systeme. Salzpfannen haben große Bedeutung für das lokale Ökosystem, für die Gesundheit von Mensch und Tier, und durch ihre Staubemissionen können sie das Klima auf regionaler und globaler Ebene beeinflussen. Die zunehmende industrielle Nutzung dieser Räume in den letzten Jahren, z.B. durch Soleförderung zur Rohstoffgewinnung, sowie der Klimawandel haben erhebliche Auswirkungen auf ihre Wasser-, Stoff- und Energiebilanz. Die optische Fernerkundung bietet das Potenzial diese Landschaftsformen zu charakterisieren, Veränderungen zu erkennen und das Prozessverständnis zu fördern, sowie umfassende Auswirkungen und Rückkopplungen zwischen klimatischen und anthropogenen Einflüssen in diesen Regionen zu erkennen. Im Vergleich zu traditionellen Feldmethoden bietet der Einsatz von Fernerkundung eine Basis für großräumige und wiederholte Untersuchungen. Das gilt insbesondere für Salzpfannen, die aufgrund ihrer Größe, abgelegener Lage und durch begrenzte Zugänglichkeit, aufgrund fehlender Infrastruktur und episodischen Überschwemmungen, häufig schwer zu untersuchen sind. Darüber hinaus eröffnete die aktuelle und zukünftig gesteigerte Verfügbarkeit von hyperspektralen Fernerkundungsdaten die Möglichkeit zur detaillierten Analyse der Reflexionseigenschaften der komplexen Mineralogie und Sedimenteigenschaften von Salzpfannenoberflächen. Der Einsatz neuer Sensorik sowie die erhöhte Datenverfügbarkeit sind jedoch derzeit noch nicht ausreichend für die Untersuchung von Salzpfannen erforscht. Das Potenzial neuer Sensoren muss bewertet und die aktuelle Methodik angepasst und verbessert werden, um zuverlässige Informationen für die Charakterisierung und Analyse des aktuellen Zustands zu liefern, sowie eine langfristige Überwachung und Bewertung der Auswirkungen von Klimaveränderung und der anthropogenen Aktivität auf Salzpfannen und deren Regionen zu ermöglichen. Diese Arbeit bietet eine Bewertung des Potentials der optischen Fernerkundung für die Untersuchung von Salzpfannen. Der Fokus liegt insbesondere auf der kombinierten Nutzung der analytischer Stärke von hyperspektralen Daten mit der erhöhten zeitlichen Auflösung von multispektralen Beobachtungen, um ein gesteigertes Verständnis der räumlichen und zeitlichen Komplexität von Salzpfannen zu erreichen. Als Testgebiet hierfür dient die Omongwa Salzpfanne in der Süd-Westlichen Kalahari. Im Rahmen dieser Arbeit werden hyperspektrale Fernerkundungsdaten für die spektrale Entmischung der mineralogischen Oberflächenzusammensetzung und für die Quantifizierung mittels spektraler Parameter genutzt. Gleichzeitig ermöglicht die multitemporale Klassifikation von Multispektraldaten die Beurteilung der Langzeitdynamik und die Analyse des saisonalen Prozessgeschehens. Die Ergebnisse zeigen, dass die Oberfläche der Omongwa-Salzpfanne in drei Hauptklassen, dominiert von verschiedenen Evaporitmineralen, eingeteilt werden kann, die aufgrund diagnostischen Absorptionsmerkmalen und durch die Analyse von in-situ Daten unterschieden werden können. Diese mineralogischen Hauptklassen korrelieren mit Zonen unterschiedlicher zeitlicher Dynamik, sowie mit dem morphologischen Aufbau der Salzpfanne, die die räumliche Verteilung von Oberflächenwasser während episodischer Flutungen und die Ausfällung von Salzen während der Trockenzeiten beeinflussen. Des Weiteren konnte auf Grundlage hyperspektralen Daten von aktuellen Sensoren, sowie anhand simulierten Daten von in Planung befindlicher Sensoren eine robuste Quantifizierung der Gipskomponente in den Oberflächensedimenten abgeleitet werden. Für das Untersuchungsgebiet deuten die Ergebnisse der Zeitreihenanalyse darauf hin, dass die Krustendynamik und Oberflächenmineralogie hauptsächlich durch die wiederkehrenden Überschwemmungsereignisse in der Regenzeit geprägt sind, aber auch durch die Temperatur und äolische Aktivität in der Trockenzeit beeinflusst wird. Zusammenfassend zeigen die Ergebnisse, dass die optische Fernerkundung großes Potenzial zur genaueren Erforschung von Salzpfannen bietet und detaillierte Informationen zu saisonalen und langzeitlichen Veränderungen liefern kann. Die Arbeit hebt auch hervor, dass der Einsatz von Fernerkundungsmethoden am erfolgreichsten ist, wenn sie an die lokalen Bedingungen und die Forschungsfrage angepasst werden. Der Ausblick zeigt, dass zukünftige Sensoren die Möglichkeiten für die Erforschung dieser Räume weiter erhöhen und ein systematisches Monitoring durch die größere Datenverfügbarkeit verbessert wird. T2 - Potential der Optischen Fernerkundung für die Analyse von Salzpfannen KW - Optische Fernerkundung KW - Hyperspektral KW - Salzpfanne KW - Playa KW - Sedimente KW - Optical remote sensing KW - Salt pan KW - Playa KW - sediments Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-473732 ER - TY - THES A1 - Senftleben, Robin T1 - Earth's magnetic field over the last 1000 years N2 - To investigate the reliability and stability of spherical harmonic models based on archeo/-paleomagnetic data, 2000 Geomagnetic models were calculated. All models are based on the same data set but with randomized uncertainties. Comparison of these models to the geomagnetic field model gufm1 showed that large scale magnetic field structures up to spherical harmonic degree 4 are stable throughout all models. Through a ranking of all models by comparing the dipole coefficients to gufm1 more realistic uncertainty estimates were derived than the authors of the data provide. The derived uncertainty estimates were used in further modelling, which combines archeo/-paleomagnetic and historical data. The huge difference in data count, accuracy and coverage of these two very different data sources made it necessary to introduce a time dependent spatial damping, which was constructed to constrain the spatial complexity of the model. Finally 501 models were calculated by considering that each data point is a Gaussian random variable, whose mean is the original value and whose standard deviation is its uncertainty. The final model arhimag1k is calculated by taking the mean of the 501 sets of Gauss coefficients. arhimag1k fits different dependent and independent data sets well. It shows an early reverse flux patch at the core-mantle boundary between 1000 AD and 1200 AD at the location of the South Atlantic Anomaly today. Another interesting feature is a high latitude flux patch over Greenland between 1200 and 1400 AD. The dipole moment shows a constant behaviour between 1600 and 1840 AD. In the second part of the thesis 4 new paleointensities from 4 different flows of the island Fogo, which is part of Cape Verde, are presented. The data is fitted well by arhimag1k with the exception of the value at 1663 of 28.3 microtesla, which is approximately 10 microtesla lower than the model suggest. N2 - Um die Stabilität und Zuverlässigkeit von sphärisch harmonischen Erdmagnetfeldmodellen, die auf paleomagnetischen und archeomagnetischen Daten basieren zu untersuchen wurden 2000 Erdmagnetfeldmodelle berechnet. Jedes dieser Modelle berechnet sich aus Daten, die mit zufälligen Unsicherheiten in die Inversion eingehen. Ein Vergleich dieser Modelle zum historischen Erdmagnetfeldmodell gufm1 zeigt, dass großflächige magnetische Strukturen bis zum sphärischen harmonischen Grad 4 stabil in allen Modellen sind. Ein Ranking der 2000 Modelle wurde verwendet, um realistischere Fehlerabschätzungen der Daten zu bekommen, als die, die von den Autoren angebeben werden. Diese Fehlerabschätzungen werden für die weitere Modellierung benutzt, welche historische und paleo-/archeomagnetiche Daten kombiniert. Der große Unterschied in der Anzahl der Daten und der räumlichen Verteilung dieser sehr verschiedenen Datenquellen machte es notwendig, eine zeitabhängige räumliche Dämpfung einzuführen. Diese ist so konstruiert, dass die räumlich Komplexität des Modelles in einem bestimmten Zeitintervall festgelegt wird. 501 Modelle wurde berechnet, indem jeder Datenpunkt als gaußsche Zufallsvariable gesehen wird mit dem Originalwert als Mittelwert und die Fehlerabschätzung als Standardabweichung. Das finale Modell arhimag1k berechnet sich aus dem Mittelwert der Gaußkoeffizienten aller 501 Modelle. arhimag1k fittet verschiedene abhängige und unabhängige Datensätze gut. Es zeigt eine frühe Anomaly an der Kern-Mantel Grenze zwischen 1000 und 1200 AD an der Lokation, wo auch die heutige Südatlantische Anomaly liegt. Eine andere interessante Auffälligkeit ist eine starke radiale Magnetfeldkomponente an der Kern-Mantel Grenze zwischen 1200 und 1400 AD über Grönland. Das Dipolmoment zeigt ein konstantes Verhalten von 1600 bis 1840 AD. Im zweiten Teil der Arbeit werden 4 neue Paleointensitäten der Insel Fogo, welches Teil von Kap Verde ist, presentiert. Diese neuen Daten werden gut von dem Modell arhimag1k gefittet, außer der Wert von 1663 AD mit 28.3 mikrotesla , welcher etwa 10 mikrotesla niedriger ist, als das Modell zeigt. T2 - Erdmagnetfeld der letzten 1000 Jahre KW - Earth's magnetic field KW - archeomagnetism KW - paleomagnetism KW - modelling KW - spherical harmonics KW - Erdmagnetfeld KW - Archäomagnetismus KW - Paläomagnetismus KW - Modellierung KW - Kugelflächenfunktionen Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-473150 ER - TY - THES A1 - Borghini, Alessia T1 - Melt inclusions in mafic rocks as witnesses of metasomatism in the Bohemian Massif N2 - Orogenic peridotites represent portions of upper subcontinental mantle now incorporated in mountain belts. They often contain layers, lenses and irregular bodies of pyroxenite and eclogite. The origin of this heterogeneity and the nature of these layers is still debated but it is likely to involve processes such as transient melts coming from the crust or the mantle and segregating in magma conduits, crust-mantle interaction, upwelling of the asthenosphere and metasomatism. All these processes occur in the lithospheric mantle and are often related with the subduction of crustal rocks to mantle depths. In fact, during subduction, fluids and melts are released from the slab and can interact with the overlying mantle, making the study of deep melts in this environment crucial to understand mantle heterogeneity and crust-mantle interaction. The aim of this thesis is precisely to better constrain how such processes take place studying directly the melt trapped as primary inclusions in pyroxenites and eclogites. The Bohemian Massif, crystalline core of the Variscan belt, is targeted for these purposes because it contains orogenic peridotites with layers of pyroxenite and eclogite and other mafic rocks enclosed in felsic high pressure and ultra-high pressure crustal rocks. Within this Massif mafic rocks from two areas have been selected: the garnet clinopyroxenite in orogenic peridotite of the Granulitgebirge and the ultra-high pressure eclogite in the diamond-bearing gneisses of the Erzgebirge. In both areas primary melt inclusions were recognized in the garnet, ranging in size between 2-25 µm and with different degrees of crystallization, from glassy to polycrystalline. They have been investigated with Micro Raman spectroscopy and EDS mapping and the mineral assemblage is kumdykolite, phlogopite, quartz, kokchetavite, phase with a main Raman peak at 430 cm-1, phase with a main Raman peak at 412 cm-1, white mica and calcite with some variability in relative abundance depending on the case study. In the Granulitgebirge osumilite and pyroxene are also present, whereas calcite is one of the main phases in the Erzgebirge. The presence of glass and the mineral assemblage in the nanogranitoids suggest that they were former droplets of melt trapped in the garnet while it was growing. Glassy inclusions and re-homogenized nanogranitoids show a silicate melt that is granitic, hydrous, high in alkalis and weakly peraluminous. The melt is also enriched in both case studies in Cs, Pb, Rb, U, Th, Li and B suggesting the involvement of crustal component, i.e. white mica (main carrier of Cs, Pb, Rb, Li and B), and a fluid (Cs, Th and U) in the melt producing reaction. The whole rock in both cases mainly consists of garnet and clinopyroxene with, in Erzgebirge samples, the additional presence of quartz both in the matrix and as a polycrystalline inclusion in the garnet. The latter is interpreted as a quartz pseudomorph after coesite and occurs in the same microstructural position as the melt inclusions. Both rock types show a crustal and subduction zone signature with garnet and clinopyroxene in equilibrium. Melt was likely present during the metamorphic peak of the rock, as it occurs in garnet. Our data suggest that the processes most likely responsible for the formation of the investigated rocks in both areas is a metasomatic reaction between a melt produced in the crust and mafic layers formerly located in the mantle wedge for the Granulitgebirge and in the subducted continental crust itself in the Erzgebirge. Thus metasomatism in the first case took place in the mantle overlying the slab, whereas in the second case metasomatism took place in the continental crust that already contained, before subduction, mafic layers. Moreover, the presence of former coesite in the same microstructural position of the melt inclusions in the Erzgebirge garnets suggest that metasomatism took place at ultra-high pressure conditions. Summarizing, in this thesis we provide new insights into the geodynamic evolution of the Bohemian Massif based on the study of melt inclusions in garnet in two different mafic rock types, combining the direct microstructural and geochemical investigation of the inclusions with the whole-rock and mineral geochemistry. We report for the first time data, directly extracted from natural rocks, on the metasomatic melt responsible for the metasomatism of several areas of the Bohemian Massif. Besides the two locations here investigated, belonging to the Saxothuringian Zone, a signature similar to the investigated melt is clearly visible in pyroxenite and peridotite of the T-7 borehole (again Saxothuringian Zone) and the durbachite suite located in the Moldanubian Zone. N2 - Die Präsenz orogener Peridotite - metamorphosierte Bestanteile des Mantels -, die in Gebirgen auftreten, belegt, dass der Erdmantel an Kontinent-Kontinent-Kollisionen beteiligt sein kann. Solche orogenen Peridotite sind häufig heterogen, da sie Pyroxenit- und Eklogitlagen und Linsen enthalten, d.h. Hochdruckgesteine, die aus Granat und Klinopyroxen bestehen. Die meisten Prozesse, die für diese Heterogenität verantwortlich sind, involvieren Schmelzen, die durch den Mantel migrieren und dabei zu dessen Metasomatose oder zu der Anreicherung von Granat und Klinopyroxen in Adern und Kanälen führen. Ein weiterer Prozess kann auch das Recyceln subduzierter ozeanischer Kruste im Erdmantel sein. Im Allgemeinen finden all diese Prozesse während der Subduktion der Kruste in Manteltiefe statt. Unter diesen Bedingungen stehen die Krustengesteine im direkten Kontakt mit den Mantelgesteinen und die dabei freigesetzten Fluide oder Schmelzen können mit den Peridotiten wechselwirken. Letztere können anschließend von den Krustengesteinen aufgenommen und zur Erdoberfläche exhumiert werden, wo sie untersucht werden können. Diese Arbeit fokussiert sich vor allem auf die Untersuchung der Pyroxenit- und Eklogitbildung sowie auf die Wechselwirkung zwischen Schmelze und Gestein während der Subduktion der Kontinentalkruste in Manteltiefe. Dafür ist das Böhmische Massiv die ideale geologische Umgebung, da es erhebliche Mengen an Pyroxeniten und Eklogiten enthält, die sich in einigen Fällen in orogenen Peridotiten befinden, und die alle in einer ehemals tief subduziertern kontinentalern Kruste eingegliedert wurden. Um die Zielstellung zu erreichen, wurde die Schmelze mit einem neuartigen Ansatz untersucht, wobei diese hier direkt in primären Schmelzeinschlüssen, die im Granat eingeschlossenen sind, untersucht wird. Es wurden zwei Gebiete mit Pyroxeniten und Eklogiten, die Schmelzeinschlüsse enthalten, ausgewählt, ein Pyroxenit aus dem Granulitgebirge und ein Ultrahochdruck-Eklogit aus dem Erzgebirge (Sachsen, Deutschland). Die Einschlüsse bestehen aus einer granitischen, wasserhaltigen Schmelze krustaler Herkunft. Das Auftreten der im Granat unregelmäßig verteilten Einschlüsse bestätigt das Vorhandensein von Schmelze während der Peakmetamorphose. Da die Schmelzen in beiden Fällen ähnlich sind, schlussfolgern wir daraus, dass beide Gesteinsarten durch metasomatische Prozesse infolge der Wechselwirkung von silikatreicher Schmelze und mafischen Lagen gebildete wurden. Im Granulitgebirge ging die Schmelze eine Wechselwirkung mit mafischen Lagen im Mantel ein und erst später wurde der Wirtsperidotit einschließlich der neugebildeten Pyroxenit- und Eklogitlagen in die subduzierte Kruste eingebaut. Im Fall der Pyroxenite und Eklogite des Erzgebirges fand die Metasomatose stattdessen in der kontinentalen Kruste statt. Hier ging die Schmelze eine Wechselwirkung mit mafischen Lagen ein, die sich bereits vor der Subduktion in der Kruste befunden hatten. Im letzteren Fall belegt der Hinweis auf ehemaligen Coesit , d. h. auf ein Mineral, das Tiefen >95 km anzeigt, welches anwesend war während der Metasomatose, dass die Prozesse in größeren Tiefen stattfanden als im Granulitgebirge. T2 - Schmelzeinschlüsse in mafischen Gesteinen als Zeugen von Metasomatose im Böhmischen Massiv KW - Petrology KW - Petrologie KW - Metamorphism KW - Melt inclusions KW - Metasomatism KW - Metamorphose KW - Schmelzeinschlüsse KW - Metasomatose Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-473639 ER - TY - THES A1 - Zeckra, Martin T1 - Seismological and seismotectonic analysis of the northwestern Argentine Central Andean foreland N2 - After a severe M W 5.7 earthquake on October 17, 2015 in El Galpón in the province of Salta NW Argentina, I installed a local seismological network around the estimated epicenter. The network covered an area characterized by inherited Cretaceous normal faults and neotectonic faults with unknown recurrence intervals, some of which may have been reactivated normal faults. The 13 three-component seismic stations recorded data continuously for 15 months. The 2015 earthquake took place in the Santa Bárbara System of the Andean foreland, at about 17km depth. This region is the easternmost morphostructural region of the central Andes. As a part of the broken foreland, it is bounded to the north by the Subandes fold-and-thrust belt and the Sierras Pampeanas to the south; to the east lies the Chaco-Paraná basin. A multi-stage morphotectonic evolution with thick-skinned basement uplift and coeval thin-skinned deformation in the intermontane basins is suggested for the study area. The release of stresses associated with the foreland deformation can result in strong earthquakes, as the study area is known for recurrent and historical, destructive earthquakes. The available continuous record reaches back in time, when the strongest event in 1692 (magnitude 7 or intensity IX) destroyed the city of Esteco. Destructive earthquakes and surface deformation are thus a hallmark of this part of the Andean foreland. With state-of-the-art Python packages (e.g. pyrocko, ObsPy), a semi-automatic approach is followed to analyze the collected continuous data of the seismological network. The resulting 1435 hypocenter locations consist of three different groups: 1.) local crustal earthquakes (nearly half of the events belong to this group), 2.) interplate activity, of regional distance in the slab of the Nazca-plate, and 3.) very deep earthquakes at about 600km depth. My major interest focused on the first event class. Those crustal events are partly aftershock events of the El Galpón earthquake and a second earthquake, in the south of the same fault. Further events can be considered as background seismicity of other faults within the study area. Strikingly, the seismogenic zone encompass the whole crust and propagates brittle deformation down, close to the Moho. From the collected seismological data, a local seismic velocity model is estimated, using VELEST. After the execution of various stability tests, the robust minimum 1D-velocity model implies guiding values for the composition of the local, subsurface structure of the crust. Afterwards, performing a hypocenter relocation enables the assignment of individual earthquakes to aftershock clusters or extended seismotectonic structures. This allows the mapping of previously unknown seismogenic faults. Finally, focal mechanisms are modeled for events with acurately located hypocenters, using the newly derived local velocity model. A compressive regime is attested by the majority of focal mechanisms, while the strike direction of the individual seismogenic structures is in agreement with the overall north – south orientation of the Central Andes, its mountain front, and individual mountain ranges in the southern Santa-Bárbara-System. N2 - Nach einem schweren Erdbeben der Magnitude M W 5.7 am 17. Oktober 2015 in El Galpón, in der Provinz Salta im Nordwesten Argentiniens, habe ich ein lokales seismologisches Netzwerk, um das vermutete Epizentrum herum, aufgebaut. Dabei haben 13 Stationen kontinuierlich für 15 Monate gemessen. Das Netzwerk wurde in einem Gebiet installiert, welches durch tektonische Störungen charakterisiert ist, die entweder in der Kreidezeit zunächst als Abschiebungen initiiert und später als Aufschiebungen reaktiviert wurden oder in der geologischen jüngeren Vergangenheit erst entstanden sind. Die Intervallzeiten zwischen zwei Erdbeben sind dabei häufig unbekannt. Das Erdbeben von 2015 trat im Santa-Barbara-System im Argentinischen Vorland, 17 km unter der Erdoberfläche auf. Diese Region ist die östlichste strukturgeologische Provinz der Zentralanden und dem broken-foreland-Typus zuzuordnen. Im Norden schließt sich der Bolivianische Faltengürtel (Sierras Subandinas) und im Süden die Sierras Pampeanas an; im Osten liegt das Chaco-Paraná Becken. Eine mehrstufige morphotektonische Entwicklung wird hier vermutet, bei der das Grundgebirge durch als thick-skinned bezeichnete Deformation herausgehoben wurde und die dazwischen liegenden Intermontanbecken gleichzeitig Deformation des Typs thin-skinned erfahren haben. Die plötzliche Spannungsfreisetzung, die mit dieser Vorlanddeformation einhergeht, kann zu starken Erdbeben führen. Das Untersuchungsgebiet ist für wiederkehrende und historische, zerstörerische Erdbeben bekannt. Der zur Verfügung stehenden Aufzeichnungen reichen bis in das Jahr 1692 zurück, als ein Erdbeben der Magnitude M 7 (oder Intensität IX) die Stadt Esteco zerstörte. Daher sind zerstörerische Erdbeben ein besonderes Kennzeichen in diesem Teil des Andenvorlands. Für die Analyse der im seismologischen Netzwerk aufgezeichneten kontinuierlichen Daten wurde ein semiautomatischer Ansatz verfolgt, der mittels hochmoderner Python-Bibliotheken informationstechnisch umgesetzt wurde. Die resultierenden 1435 Erdbeben bestehen aus drei verschiedenen Gruppen: 1.) lokale Erdbeben in der Erdkruste (die etwa die Hälfte aller Events ausmachen), 2.) weiter entfernte Interplattenaktivität, die durch die Subduktion der Nazca-Platte unter den Südamerikanischen Kontinent hervorgerufen wird und 3.) sehr tiefen Erdbeben in etwa 600 km Tiefe. Mein Hauptaugenmerk lag dabei auf der ersten Gruppe. Diese krustalen Ereignisse sind teilweise Nachbeben des El Galpón Erdbebens und eines weiteren Bebens, welches sich weiter im Süden an der gleichen Störung ereignete. Die restlichen Beben können der allgemeinen Hintergrundaktivität entlang weiterer Störungen im Untersuchungsgebiet zugeschrieben werden. Beachtenswert ist dabei der Umstand, dass die Erdbebenaktivität in der gesamten Kruste beobachtet werden kann und sich dadurch die Deformation bis a fast an den Erdmantel ausbreitet. Mit den gesammelten Daten kann, unter der Verwendung der VELEST Software, ein lokales seismisches Geschwindigkeitsmodell bestimmt werden. Nach der Durchführung verschiedener Stabilitätstests, können aus dem robusten eindimensionalen Modell Richtwerte für die Zusammensetzung und den Aufbau der Erdkruste gewonnen werden. Dieanschließende Relokalisierung von Erdbebenherden erlaubt die Zuordnung einzelner Erdbeben zu Erdbebenclustern oder ausgedehnten seismotektonischen Strukturen. Dadurch können sogar zuvor unbekannte seismogene Störungen kartiert werden. Schlussendlich, werden Herdflächenlösungen für Beben mit präzise lokalisierten Erdbebenherden und unter der Einbeziehung des neu bestimmten lokalen Geschwindigkeitsmodells modelliert. Der Großteil der resultierenden Lösungen bestätigt das vorherrschende kompressive Regime. Das Streichen der einzelnen seismogenen Strukturen stimmt größtenteils mit der allgemeinen Nord – Süd Ausrichtugn der Zentralanden, ihrer Gebirgsfront und den einzelnen Höhenzügen im Santa-Barbará-System überein. T2 - Seismologische und Seismotektonische Analyse des Vorlandsystems der nordwestargentinischen Zentralanden KW - Seismology KW - Seismotektonik KW - Geophysics KW - Andes KW - Geosciences KW - Argentina KW - Anden KW - Seismologie KW - Geophysik KW - Geowissenschaften KW - Argentinien Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-473240 ER - TY - THES A1 - Nardini, Livia T1 - Influence of heterogeneities on the initiation of shear zones in the ductile regime N2 - The current thesis contains the results from two experimental and one modelling study focused on the topic of ductile strain localization in the presence of material heterogeneities. Localization of strain in the high temperature regime is a well known feature of rock deformation occurring in nature at different scales and in a variety of lithologies. Large scale shear zones at the roots of major crustal fault zones are considered responsible for the activity of plate tectonics on our planet. A large number of mechanisms are suggested to be associated with strain softening and nucleation of localization. Among these, the presence of material heterogeneities within homogeneous host rocks is frequently observed in field examples to trigger shear zone development. Despite a number of studies conducted on the topic, the mechanisms controlling initiation and evolution of localization are not fully understood yet. We investigated, experimentally and by means of numerical modelling, phenomenological and microphysical aspects of high temperature strain localization in a homogeneous body containing single and paired inclusions of weaker material. A monomineralic carbonate system composed of Carrara marble (homogeneous, strong matrix) and Solnhofen limestone (weak planar inclusions) is selected for our studies based on its versatility as an experimental material and on the frequent occurrence of carbonate rocks at the core of natural shear zones. To explore the influence of different loading conditions on heterogeneity-induced high temperature shear zones we conducted torsion experiments under constant twist (deformation) rate and constant torque (stress) conditions in a Paterson-type deformation apparatus on hollow cylinders of marble containing single planar inclusions of limestone. At the imposed experimental conditions (900 ◦C temperature and 400 MPa confining pressure) both materials deform plastically and the marble is ≈ 9 times stronger than the limestone. The viscosity contrast between the two materials induces a perturbation of the stress field within the marble matrix at the tip of the planar inclusion. Early on along the deformation path (at bulk shear strains ≈ 0.3), heterogeneous distribution of strain can be observed under both loading conditions and a small area of incipient strain localization is formed at the tip of the weak limestone inclusion. Strongly deformed grains, incipient dynamic recrystallization and a weak crystallographic preferred orientation characterize the marble within an area a few mm in front of the inclusion. As the bulk strain is increased (up to γ ≈ 1), the area of microstructural modification is expanded along the inclusion plane, the texture strengthens and grain size refinement by dynamic recrystallization becomes pervasive. Locally, evidences for coexisting brittle deformation are also observed regardless of the imposed loading conditions. A shear zone is effectively formed within the deforming Carrara marble, its geometry controlled by the plane containing the thin plate of limestone. Thorough microstructural and textural analysis, however, do not reveal substantial differences in the mechanisms or magnitude of strain localization at the different loading conditions. We conclude that, in the presence of material heterogeneities capable of inducing strain softening, the imposed loading conditions do not affect ductile localization in its nucleating and transient stages. As the ultimate goal of experimental rock deformation is the extrapolation of results to geologically relevant time and space scales, we developed 2D numerical models reproducing (and benchmarked to) our experimental results. Our cm-scaled models have been implemented with a first-order strain-dependent softening law to reproduce the effect of rheological weakening in the deforming material. We successfully reproduced the local stress concentration at the inclusion tips and the strain localization initiated in the marble matrix. The heterogeneous distribution of strain and its evolution with imposed bulk deformation (i.e. the shape and extent of the nucleating shear zone) are observed to depend on the degree of softening imposed to the deforming matrix. When a second (artificial) softening step is introduced at elevated bulk strains in the model, the formation of a secondary high strain layer is observed at the core of the initial shear zone, analogous to the development of ultramylonite bands in high strain natural shear zones. Our results do not only reproduce the nucleation and transient evolution of a heterogeneity-induced high temperature shear zone with high accuracy, but also confirm the importance of introducing reliable softening laws capable of mimicking strain weakening to numerical models of crustal scale ductile processes. Material heterogeneities inducing strain localization in the field are often consisting of brittle precursors (joints and fractures). More generally, the interaction of brittle and ductile deformation mechanisms and its effect on the localization of strain have been a key topic in the structural geology community for a long time. The positive feedback between (micro)fracturing and ductile strain localization is a well recognized effect in a number of field examples. We experimentally investigated the influence of brittle deformation on the initiation and evolution of high temperature shear zones in a strong matrix containing pairs of weak material heterogeneities. Our Carrara marble-Solnhofen limestone inclusions system was tested in triaxial compression under constant strain rate and high temperature (900 ◦C) conditions in a Paterson deformation apparatus. The inclusion pairs were arranged in non-overlapping step-over geometries of either compressional or extensional nature. Experimental runs were conducted at different confining pressures (30, 50, 100 and 300 MPa) to induce various amounts of brittle deformation within the marble matrix. At low confinement (30 and 50 MPa) abundant brittle deformation is observed in all configurations, but the spatial distribution of cracks is dependent on the kinematics of the step-over region: concentrated along the shearing plane between the inclusions in the extensional samples, or broadly distributed around the inclusions but outside the step-over region in the compressional configuration. Accordingly, brittle-assisted ductile processes tend to localize deformation along the inclusions plane in the extensional geometry or to distribute widely across large areas of the matrix in the compressional step-over. At pressures of 100 and 300 MPa fracturing is mostly suppressed in both configurations and strain is accommodated almost entirely by viscous creep. In extensional samples this leads to progressive de-localization with increasing confinement. Our results show that, while ductile localization of strain is indeed more efficient where assisted by brittle processes, these latter are only effective if themselves heterogeneously distributed, ultimately a function of the local stress perturbations. N2 - Die vorliegende Doktorarbeit umfasst Ergebnisse von zwei experimentellen und einer Modellierungsstudie. Diese befassen sich mit der Lokalisierung von duktilen Verformungen, hervorgerufen durch unterschiedliche Materialeigenschaften. Die Lokalisierung von Verformungen im Hochtemperaturbereich in unterschiedlichen Maßstäben und in einer Vielzahl von Lithologien ist ein bekanntes Merkmal der natürlichen Gesteinsdeformationen. So wird beispielsweise die Aktivität der Plattentektonik unseres Planeten durch weiträumige Scherzonen am Grund dieser Plattengrenzen verantwortlich gemacht. Dabei wird eine große Anzahl von Mechanismen mit der durch die Verformung hervorgerufenen Materialermüdung und der Ausbildung der Lokalisierung in Verbindung gebracht. Dabei wird unter diesen Mechanismen das Vorhandensein von Materialheterogenitäten innerhalb eines Gesteins häufig als Auslöser für die Ausbildung von Scherzonen beobachtet. Obwohl bereits Studien zu diesem Thema durchgeführt wurden, sind die kontrollierenden Mechanismen, die für die Initiierung und Entwicklung der Lokalisierung zuständig sind, bis heute nicht vollumfänglich verstanden. Aus diesem Grund wurden im Rahmen der vorgelegten Dissertation phänomenologische und mikrophysikalische Aspekte der Lokalisierung von Verformungen im Hochtemperaturbereich in einem homogenen Gesteinskörper, der mit einfachen und gepaarten Inklusionen aus weicheren Material versehen wurde, experimentell und unter Hilfenahme von numerischen Modellen untersucht. Da Karbonatgesteine häufig am Ursprung natürlicher Scherzonen auftreten und diese für ihre Vielseitigkeit als Experimentiermaterial bekannt sind, wurde ein monomineralisches Karbonatsystem, bestehend aus Carrara Marmor (homogene, starke Matrix) und Solnhofen Kalkstein (schwache Inklusionen) als zu untersuchendes Probenmaterial für diese Studie gewählt. Um den Einfluss unterschiedlicher Deformationsbedingungen auf die, durch die Materialheterogenität hervorgerufenen Scherzonen im Hochtemperaturbereich zu untersuchen, wurden Torsionsexperimente bei konstanter Torsionsrate und konstantem Drehmoment in einer Paterson-Deformationsapparatur an hohlen Carrara Marmorzylindern mit einer ebenen Inklusion bestehend aus Kalkstein durchgeführt. Unter den vorgegebenen Randbedingungen (Temperatur = 900 ◦C, Manteldruck = 400 MPa) verformten sich beide Materialien plastisch, wobei die Festigkeit des Marmors in etwa dem neunfachen der Kalksteinfestigkeit entspricht. An der Spitze der ebenen Kalksteininklusion wird durch den Viskositätskontrast der beiden Materialien dadurch eine Störung des Spannungsfeldes in der Marmormatrix hervorgerufen. In der frühen Phase der Deformation (Scherverformung γ ≈ 0.3) kann eine heterogene Verteilung der Verformungen in der gesamten Probe bei beiden Experimenttypen beobachtet werden. Zusätzlich beginnt sich an der Spitze der schwächeren Kalksteininklusion ein Bereich mit lokaler Verformung in der Marmormatrix auszubilden. Dieser ist durch stark deformierte Mineralkörner, beginnende dynamische Rekristallisation und einer schwach ausgeprägten kristallographisch bevorzugten Ausrichtung innerhalb einer Fläche weniger Millimeter charakterisiert. Mit ansteigender Gesamtverformung (γ ≈ 1) erweitert sich die Fläche der mikrostrukturellen Modifikationen entlang der Inklusionsebene. Zusätzlich konnten eine verfestigte Textur und eine Verfeinerung der Korngröße aufgrund dynamischer Rekristallisation beobachtet werden. Lokale Anzeichen für eine gleichzeitige spröde Verformung konnten, unabhängig von den Deformationsbedingungen, ebenfalls festgestellt werden. Innerhalb des deformierten Marmors bildete sich eine Scherzone aus, deren Geometrie maßgeblich durch die Ebene der Kalksteininklusion kontrolliert wird. Sorgfältig durchgeführte mikrostrukturelle Analysen zeigten jedoch keine wesentlichen Unterschiede der Mechanismen oder dem Ausmaß der Lokalisierung der Verformung bei unterschiedlichen Deformationsbedingungen. Daraus lässt sich schließen, dass bei dem Vorhandensein von Materialheterogenitäten, welche eine verformungsbedingte Materialermüdung hervorrufen können, die verwendeten Deformationsbedingungen keinen Einfluss auf die Lokalisierung duktiler Deformation in ihrer Entstehung und übergangsphasen haben. Da für gewöhnlich die Durchführung von Deformationsexperimenten auf die Extrapolation der gewonnenen Ergebnisse auf geologische Zeiträume abzielt, wurden zwei- dimensionale numerische Modelle entwickelt, welche in der Lage sind die aufgenommenen experimentellen Daten zu reproduzieren und zu bewerten. Diese, auf dem Zentimetermaßstab skalierten Modelle wurden mit einem verformungsbasierten Ermüdungsgesetz erster Ordnung umgesetzt, um den Effekt der rheologischen Materialermüdung nachzubilden. Die lokale Spannungskonzentration an der Spitze der Inklusionen und die in der Marmormatrix initiierten Lokalisierung der Verformung konnten mit diesen Modellen erfolgreich reproduziert werden. Dabei wurde festgestellt, dass die heterogene Verteilung der Verformung und deren Entwicklung mit zunehmender Gesamtverformung (z.B. Form und Umfang der sich ausbildenden Scherzone) abhängig vom Grad der Ermüdung der deformierten Matrix ist. Analog zu der Entwicklung von Ultramylonitbändern in natürlichen Scherzonen mit hoher Verformung, konnte bei der Einführung eines zweites (künstlichen) Ermüdungsschritts bei erhöhter Gesamtverformung, die Ausbildung einer zweiten Schicht mit großer Verformung am Kern der initialen Scherzone beobachtet werden. Mit den gewonnenen Ergebnissen der numerischen Simulationen wurde nicht nur die Ausbildung und transiente Entwicklung, der durch die Materialheterogenität hervorgerufenen Scherzone im Hochtemperaturbereich mit großer Genauigkeit reproduziert. Auch wurde die Wichtigkeit verlässliche Ermüdungsgesetze aufzustellen, die in der Lage sind die durch die Verformung hervorgerufenen Materialermüdung im geologischen Maßstab unter Hinzunahme von numerischen Modellen nachzuahmen, bestätigt. Die durch Materialheterogenitäten hervorgerufene Lokalisierung von Verformungen in der Natur bestehen häufig aus spröden Vorläufern, wie beispielsweise Klüften und Rissen. Die Interaktion von spröden und duktilen Deformationsmechanismen im Allgemeinen und ihr Effekt auf die Lokalisierung von Verformungen sind seit langem Schlüsselthema auf dem Gebiet der Strukturgeologie. Die Kopplung von spröden Bruchprozessen mit der Lokalisierung duktiler Verformungen ist oft Gegenstand der Untersuchung in einer Vielzahl von Feldstudien. Daher wurde experimentell der Einfluss von spröder Deformation auf die Initiierung und Entwicklung von Hochtemperatur Scherzonen in einer starken Matrix mit schwächeren Materialheterogenitäten untersucht. Dafür wurden Carrara Marmor-Solnhofen Kalksteininklusions-Systeme unter triaxialen Bedingungen bei konstanter axialer Verformungsrate und hoher Temperatur (T = 900 ◦C) in einer PatersonApparatur deformiert. Dabei wurden die Inklusionen in einer übereinander liegenden, aber nicht überlappenden Geometrie so angeordnet, dass sich bei axialer Probendeformation entweder Kompression oder Dehnung in der Fläche zwischen den Inklusionen einstellt. Die Versuche wurden bei verschiedenen Manteldrücken (P = 30, 50, 100 und 300 MPa) durchgeführt, um unterschiedliche Beträge an spröder Deformation in der Marmormatrix hervorzurufen. Bei geringen Manteldrücken (P = 30 und 50 MPa) kann ein hoher Anteil an spröder Deformation in allen Probenkonfigurationen beobachtet werden. Allerdings ist die räumliche Verteilung der Risse abhängig von der Kinematik der sich übereinanderliegenden Inklusionen. Bei der Dehnungskonfiguration sind die Risse entlang der Scherfläche zwischen den Inklusionen konzentriert, während sie bei der Kompressionskonfiguration außer halb der Inklusionen weit verteilt sind. Dementsprechend neigen duktile, durch spröde unterstützte Prozesse Deformationen entlang der Inklusionsebene bei Dehnung zu lokalisieren oder sich über weite Fläche der Matrix bei Kompression zu verteilen. Bei Manteldrücken von 100 und 300 MPa ist die Risserzeugung in beiden Konfigurationen weitestgehend unterdrückt und die Verformung wird fast ausschließlich durch viskoses Kriechen akkommodiert. Mit ansteigendem Manteldruck führt das bei Proben der Dehnungskonfiguration zu fortschreitender De-Lokalisierung. Die Ergebnisse zeigen, dass die Lokalisierung von duktilen Verformungen effizienter ist, wenn diese durch spröde Bruchprozesse assistiert werden. Allerdings sind diese spröden Prozesse nur dann effektiv, wenn sie heterogen verteilt sind, was letztendlich eine Funktion der lokalen Spannungsstörungen ist. KW - localized deformation KW - shear zones KW - Carrara marble KW - high temperature rock deformation KW - brittle precursors KW - Carrara-marmor KW - Spröde Vorläufer KW - Hochtemperatur Gesteinsdeformtion KW - Lokalisierte Deformation KW - Scherzonen Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-446165 ER - TY - THES A1 - Ramezani Ziarani, Maryam T1 - Characterization of atmospheric processes related to hydro-meteorological extreme events over the south-central Andes N2 - The significant environmental and socioeconomic consequences of hydrometeorological extreme events, such as extreme rainfall, are constituted as a most important motivation for analyzing these events in the south-central Andes of NW Argentina. The steep topographic and climatic gradients and their interactions frequently lead to the formation of deep convective storms and consequently trigger extreme rainfall generation. In this dissertation, I focus on identifying the dominant climatic variables and atmospheric conditions and their spatiotemporal variability leading to deep convection and extreme rainfall in the south-central Andes. This dissertation first examines the significant contribution of temperature on atmospheric humidity (dew-point temperature, Td) and on convection (convective available potential energy, CAPE) for deep convective storms and hence, extreme rainfall along the topographic and climatic gradients. It was found that both climatic variables play an important role in extreme rainfall generation. However, their contributions differ depending on topographic and climatic sub-regions, as well as rainfall percentiles. Second, this dissertation explores if (near real-time) the measurements conducted by the Global Navigation Satellite System (GNSS) on integrated water vapor (IWV) provide reliable data for explaining atmospheric humidity. I argue that GNSS-IWV, in conjunction with other atmospheric stability parameters such as CAPE, is able to decipher the extreme rainfall in the eastern central Andes. In my work, I rely on a multivariable regression analysis described by a theoretical relationship and fitting function analysis. Third, this dissertation identifies the local impact of convection on extreme rainfall in the eastern Andes. Relying on a Principal Component Analysis (PCA) it was found that during the existence of moist and warm air, extreme rainfall is observed more often during local night hours. The analysis includes the mechanisms for this observation. Exploring the atmospheric conditions and climatic variables leading to extreme rainfall is one of the main findings of this dissertation. The conditions and variables are a prerequisite for understanding the dynamics of extreme rainfall and predicting these events in the eastern Andes. N2 - Die entscheidenden ökologischen und sozioökonomischen Folgen hydrometeorologischer Extremereignisse, wie z.B. extremer Niederschläge, stellen eine wichtige Motivation für die Analyse dieser Ereignisse in den südlich-zentralen Anden von NW Argentinien dar. Die steilen topographischen und klimatischen Gradienten und deren Wechselwirkungen führen häufig zu einer starken konvektiven Regenfallbildung und sind häufig auch die Auslöser von Starkniederschlägen. In dieser Dissertation konzentriere ich mich auf die Identifizierung der dominanten klimatischen Variablen und atmosphärischen Rahmenbedingungen und ihrer räumlich-zeitliche Variabilität, die zu starker Konvektion und extremen Niederschlägen in den südlich-zentralen Anden führt. Diese Dissertation untersucht zunächst den wichtigen Beitrag der Temperatur zur Luftfeuchtigkeit(Taupunkttemperatur, Td) und zur Konvektion (konvektive verfügbare potenzielle Energie, CAPE) für starke, konvektive Stürme und damit extreme Niederschläge entlang der topographischen und klimatischen Gradienten. Es wurde festgestellt, dass beide klimatischen Variablen eine wichtige Rolle bei der Erzeugung extremer Niederschläge spielen. Ihr Beitrag hängt jedoch von den topographischen und klimatischen Teilregionen sowie den Niederschlagsperzentilen ab. Zweitens, auf der Grundlage einer multivariablen Regressionsanalyse, die durch eine theoretische Beziehungs- und Anpassungsfunktionsanalyse beschrieben wird, untersucht diese Arbeit, ob integrierter Wasserdampf (IWV) auf der Grundlage von GNSS (Global Navigation Satellite System) Messungen zuverlässige Daten sind, um die Luftfeuchtigkeit zu erklären. Das GNSS-IWV in Verbindung mit anderen atmosphärischen Stabilitätsparametern wie z.B. CAPE ist in der Lage, die extremen Niederschläge in den östlichen zentralen Anden zu entschlüsseln. Drittens, diese Dissertation identifiziert die lokalen Auswirkungen der Konvektion auf extreme Niederschläge in den östlichen Anden. Auf der Grundlage einer Hauptkomponentenanalyse (PCA) wurde festgestellt, dass die extremen Niederschläge häufiger während der lokalen Nachtstunden beobachtet werden, wenn feuchte und warme Luft vorhanden ist. Die Erforschung der atmosphärischen Rahmenbedingungen und klimatischen Variablen, die zu extremen Niederschlägen führen, ist eines der wichtigste Ergebnisse dieser Arbeit. Sie ist Voraussetzung für das Verständnis der Dynamik von extremen Niederschlägen und wichtig für die Vorhersage dieser Ereignisse in den östlichen Anden. T2 - Charakterisierung der atmosphärischen Prozesse im Zusammenhang mit hydro-meteorologischen Extremereignissen über den süd-zentralen Anden KW - eastern south–central Andes KW - extreme rainfall KW - deep convection KW - östlich-südzentrale Anden KW - Extremniederschläge KW - starker Konvektion Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-471755 ER - TY - JOUR A1 - Ayzel, Georgy A1 - Scheffer, Tobias A1 - Heistermann, Maik T1 - RainNet v1.0 BT - a convolutional neural network for radar-based precipitation nowcasting JF - Geoscientific Model Development N2 - In this study, we present RainNet, a deep convolutional neural network for radar-based precipitation nowcasting. Its design was inspired by the U-Net and SegNet families of deep learning models, which were originally designed for binary segmentation tasks. RainNet was trained to predict continuous precipitation intensities at a lead time of 5min, using several years of quality-controlled weather radar composites provided by the German Weather Service (DWD). That data set covers Germany with a spatial domain of 900km × 900km and has a resolution of 1km in space and 5min in time. Independent verification experiments were carried out on 11 summer precipitation events from 2016 to 2017. In order to achieve a lead time of 1h, a recursive approach was implemented by using RainNet predictions at 5min lead times as model inputs for longer lead times. In the verification experiments, trivial Eulerian persistence and a conventional model based on optical flow served as benchmarks. The latter is available in the rainymotion library and had previously been shown to outperform DWD's operational nowcasting model for the same set of verification events. RainNet significantly outperforms the benchmark models at all lead times up to 60min for the routine verification metrics mean absolute error (MAE) and the critical success index (CSI) at intensity thresholds of 0.125, 1, and 5mm h⁻¹. However, rainymotion turned out to be superior in predicting the exceedance of higher intensity thresholds (here 10 and 15mm h⁻¹). The limited ability of RainNet to predict heavy rainfall intensities is an undesirable property which we attribute to a high level of spatial smoothing introduced by the model. At a lead time of 5min, an analysis of power spectral density confirmed a significant loss of spectral power at length scales of 16km and below. Obviously, RainNet had learned an optimal level of smoothing to produce a nowcast at 5min lead time. In that sense, the loss of spectral power at small scales is informative, too, as it reflects the limits of predictability as a function of spatial scale. Beyond the lead time of 5min, however, the increasing level of smoothing is a mere artifact – an analogue to numerical diffusion – that is not a property of RainNet itself but of its recursive application. In the context of early warning, the smoothing is particularly unfavorable since pronounced features of intense precipitation tend to get lost over longer lead times. Hence, we propose several options to address this issue in prospective research, including an adjustment of the loss function for model training, model training for longer lead times, and the prediction of threshold exceedance in terms of a binary segmentation task. Furthermore, we suggest additional input data that could help to better identify situations with imminent precipitation dynamics. The model code, pretrained weights, and training data are provided in open repositories as an input for such future studies. KW - weather KW - models KW - skill Y1 - 2020 U6 - https://doi.org/10.5194/gmd-13-2631-2020 SN - 1991-959X SN - 1991-9603 VL - 13 IS - 6 SP - 2631 EP - 2644 PB - Copernicus Publ. CY - Göttingen ER - TY - GEN A1 - Ayzel, Georgy A1 - Scheffer, Tobias A1 - Heistermann, Maik T1 - RainNet v1.0 BT - a convolutional neural network for radar-based precipitation nowcasting T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - In this study, we present RainNet, a deep convolutional neural network for radar-based precipitation nowcasting. Its design was inspired by the U-Net and SegNet families of deep learning models, which were originally designed for binary segmentation tasks. RainNet was trained to predict continuous precipitation intensities at a lead time of 5min, using several years of quality-controlled weather radar composites provided by the German Weather Service (DWD). That data set covers Germany with a spatial domain of 900km × 900km and has a resolution of 1km in space and 5min in time. Independent verification experiments were carried out on 11 summer precipitation events from 2016 to 2017. In order to achieve a lead time of 1h, a recursive approach was implemented by using RainNet predictions at 5min lead times as model inputs for longer lead times. In the verification experiments, trivial Eulerian persistence and a conventional model based on optical flow served as benchmarks. The latter is available in the rainymotion library and had previously been shown to outperform DWD's operational nowcasting model for the same set of verification events. RainNet significantly outperforms the benchmark models at all lead times up to 60min for the routine verification metrics mean absolute error (MAE) and the critical success index (CSI) at intensity thresholds of 0.125, 1, and 5mm h⁻¹. However, rainymotion turned out to be superior in predicting the exceedance of higher intensity thresholds (here 10 and 15mm h⁻¹). The limited ability of RainNet to predict heavy rainfall intensities is an undesirable property which we attribute to a high level of spatial smoothing introduced by the model. At a lead time of 5min, an analysis of power spectral density confirmed a significant loss of spectral power at length scales of 16km and below. Obviously, RainNet had learned an optimal level of smoothing to produce a nowcast at 5min lead time. In that sense, the loss of spectral power at small scales is informative, too, as it reflects the limits of predictability as a function of spatial scale. Beyond the lead time of 5min, however, the increasing level of smoothing is a mere artifact – an analogue to numerical diffusion – that is not a property of RainNet itself but of its recursive application. In the context of early warning, the smoothing is particularly unfavorable since pronounced features of intense precipitation tend to get lost over longer lead times. Hence, we propose several options to address this issue in prospective research, including an adjustment of the loss function for model training, model training for longer lead times, and the prediction of threshold exceedance in terms of a binary segmentation task. Furthermore, we suggest additional input data that could help to better identify situations with imminent precipitation dynamics. The model code, pretrained weights, and training data are provided in open repositories as an input for such future studies. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 964 KW - weather KW - models KW - skill Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-472942 SN - 1866-8372 IS - 964 ER - TY - THES A1 - Pick, Leonie Johanna Lisa T1 - The centennial evolution of geomagnetic activity and its driving mechanisms N2 - This cumulative thesis is concerned with the evolution of geomagnetic activity since the beginning of the 20th century, that is, the time-dependent response of the geomagnetic field to solar forcing. The focus lies on the description of the magnetospheric response field at ground level, which is particularly sensitive to the ring current system, and an interpretation of its variability in terms of the solar wind driving. Thereby, this work contributes to a comprehensive understanding of long-term solar-terrestrial interactions. The common basis of the presented publications is formed by a reanalysis of vector magnetic field measurements from geomagnetic observatories located at low and middle geomagnetic latitudes. In the first two studies, new ring current targeting geomagnetic activity indices are derived, the Annual and Hourly Magnetospheric Currents indices (A/HMC). Compared to existing indices (e.g., the Dst index), they do not only extend the covered period by at least three solar cycles but also constitute a qualitative improvement concerning the absolute index level and the ~11-year solar cycle variability. The analysis of A/HMC shows that (a) the annual geomagnetic activity experiences an interval-dependent trend with an overall linear decline during 1900–2010 of ~5 % (b) the average trend-free activity level amounts to ~28 nT (c) the solar cycle related variability shows amplitudes of ~15–45 nT (d) the activity level for geomagnetically quiet conditions (Kp<2) lies slightly below 20 nT. The plausibility of the last three points is ensured by comparison to independent estimations either based on magnetic field measurements from LEO satellite missions (since the 1990s) or the modeling of geomagnetic activity from solar wind input (since the 1960s). An independent validation of the longterm trend is problematic mainly because the sensitivity of the locally measured geomagnetic activity depends on geomagnetic latitude. Consequently, A/HMC is neither directly comparable to global geomagnetic activity indices (e.g., the aa index) nor to the partly reconstructed open solar magnetic flux, which requires a homogeneous response of the ground-based measurements to the interplanetary magnetic field and the solar wind speed. The last study combines a consistent, HMC-based identification of geomagnetic storms from 1930–2015 with an analysis of the corresponding spatial (magnetic local time-dependent) disturbance patterns. Amongst others, the disturbances at dawn and dusk, particularly their evolution during the storm recovery phases, are shown to be indicative of the solar wind driving structure (Interplanetary Coronal Mass Ejections vs. Stream or Co-rotating Interaction Regions), which enables a backward-prediction of the storm driver classes. The results indicate that ICME-driven geomagnetic storms have decreased since 1930 which is consistent with the concurrent decrease of HMC. Out of the collection of compiled follow-up studies the inclusion of measurements from high-latitude geomagnetic observatories into the third study’s framework seems most promising at this point. N2 - Diese kumulative Arbeit behandelt die Entwicklung der geomagnetischen Aktivität seit Beginn des 20. Jahrhunderts, also die zeitabhängige Antwort des Erdmagnetfeldes auf das Einwirken der Sonne. Der Fokus liegt auf einer Beschreibung des in der Magnetosphäre begründeten, magnetischen Störfeldes auf der Erdoberfläche. Die Variabilität dieses Störfeldes reagiert besonders sensibel auf das Ringstromsystem und wird hinsichtlich des Sonnenantriebs interpretiert. Damit trägt diese Arbeit dazu bei, die langfristige solar-terrestrische Interaktion umfassend zu verstehen. Die gemeinsame Basis der vorgestellen Publikationen ist eine Reanalyse der vektoriellen Magnetfeldmessungen von geomagnetischen Observatorien, die auf niedrigen und mittleren geomagnetischen Breitengraden liegen. In den beiden ersten Studien werden neue, auf den Ringstrom spezialisierte, geomagntische Aktivitätsindizes hergeleitet, die „Annual/Hourly Magnetopsheric Currents“ (A/HMC) Indizes. Verglichen mit existierenden Indizes (z.B. dem Dst Index) verlängern sie nicht nur die abgedeckte Zeitspanne, sondern sie stellen auch eine qualitative Verbesserung bezüglich des absoluten Niveaus und der mit dem ca. 11-jährigen Sonnenzyklus einhergehenden Variabilität dar. Die Auswertung des A/HMC zeigt, dass (a) die jährliche geomagnetiche Aktivität einem intervallabhängigen Trend unterliegt mit einer linearen Abnahme von ca. 5 % im Zeitraum 1900-2010 (b) das durchschnittliche, Trend-befreite Aktivitätsniveau bei ca. 28 Nanotesla (nT) liegt (c) die mit dem Sonnenzyklus zusammenhängende Variabilität eine Amplitude zwischen 15 und 45 nT aufweist (d) das Aktivitätsniveau für geomagnetisch ruhige Konditionen (Kp < 2 nT) bei knapp unter 20 nT liegt. Die Plausibilität der letztgenannten drei Punkte lässt sich über einen Vergleich mit unabhängigen Abschätzungen sicherstellen. Entweder zieht man hierzu Magnetfeldmessungen von „Low-Earth-Orbit“ Satellitenmissionen (seit den 1990er-Jahren), oder eine Modellierung der geomagnetischen Aktivität mittels der Parameter des Sonnenwindes (seit den 1960er-Jahren) heran. Eine unabhängige Validierung des langfristigen Trends ist jedoch problematisch, hauptsächlich, weil die Sensitivität der lokalen geomagnetischen Aktivität vom Breitengrad abhängt. Folglich ist A/HMC weder mit globalen, geomagnetischen Aktivitätindizes (z.B. mit dem aa Index), noch mit dem teils rekonstruierten, „offenen“ solaren Magnetfluss direkt vergleichbar. Die dritte Studie kombiniert eine konsistente, HMC-basierte Identifikation geomagnetischer Stürme aus dem Zeitraum 1930-2015 mit einer Analyse der entsprechenden räumlichen Störungsmuster. Die Studie zeigt, dass insbesondere die Entwicklung der Magnetfeldstörungen zu Sonnenauf- und Sonnenuntergang während der Erholungsphase der Stürme statistisch unterschiedlich auf die Art des Sonnenwindantriebs (Koronale Massenauswürfe (KM) oder korotierende Wechselwirkungsregionen) reagieren. Dies ermöglicht eine Bestimmung der Antriebsklassen von historischen geomagnetischen Stürmen. Die Ergebnisse zeigen, dass KM-getriebene Stürme seit 1930 abgenommen haben, was mit der einhergehenden Verringerung von HMC zusammenpasst. Aus der Sammlung möglicher Folgestudien erscheint es zum jetzigen Zeitpunkt am vielversprechendsten, Observatoriumsmessungen aus hohen Breiten im Rahmen der dritten Studie einzubeziehen. T2 - Die hundertjährige Entwicklung der geomagnetischen Aktivität und ihre Antriebsmechanismen KW - Geomagnetic activity KW - Geomagnetic index KW - Geomagnetic observatory KW - Space climate KW - Space weather KW - Geomagnetische Aktivität KW - Geomagnetischer Index KW - Geomagnetisches Observatorium KW - Weltraumklima KW - Weltraumwetter Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-472754 ER - TY - GEN A1 - Agarwal, Ankit A1 - Marwan, Norbert A1 - Maheswaran, Rathinasamy A1 - Öztürk, Ugur A1 - Kurths, Jürgen A1 - Merz, Bruno T1 - Optimal design of hydrometric station networks based on complex network analysis T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Hydrometric networks play a vital role in providing information for decision-making in water resource management. They should be set up optimally to provide as much information as possible that is as accurate as possible and, at the same time, be cost-effective. Although the design of hydrometric networks is a well-identified problem in hydrometeorology and has received considerable attention, there is still scope for further advancement. In this study, we use complex network analysis, defined as a collection of nodes interconnected by links, to propose a new measure that identifies critical nodes of station networks. The approach can support the design and redesign of hydrometric station networks. The science of complex networks is a relatively young field and has gained significant momentum over the last few years in different areas such as brain networks, social networks, technological networks, or climate networks. The identification of influential nodes in complex networks is an important field of research. We propose a new node-ranking measure – the weighted degree–betweenness (WDB) measure – to evaluate the importance of nodes in a network. It is compared to previously proposed measures used on synthetic sample networks and then applied to a real-world rain gauge network comprising 1229 stations across Germany to demonstrate its applicability. The proposed measure is evaluated using the decline rate of the network efficiency and the kriging error. The results suggest that WDB effectively quantifies the importance of rain gauges, although the benefits of the method need to be investigated in more detail. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 951 KW - identifying influential nodes KW - climate networks KW - rainfall KW - streamflow KW - synchronization KW - precipitation KW - classification KW - events Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-471006 SN - 1866-8372 IS - 951 ER - TY - JOUR A1 - Agarwal, Ankit A1 - Marwan, Norbert A1 - Maheswaran, Rathinasamy A1 - Öztürk, Ugur A1 - Kurths, Jürgen A1 - Merz, Bruno T1 - Optimal design of hydrometric station networks based on complex network analysis JF - Hydrology and Earth System Sciences N2 - Hydrometric networks play a vital role in providing information for decision-making in water resource management. They should be set up optimally to provide as much information as possible that is as accurate as possible and, at the same time, be cost-effective. Although the design of hydrometric networks is a well-identified problem in hydrometeorology and has received considerable attention, there is still scope for further advancement. In this study, we use complex network analysis, defined as a collection of nodes interconnected by links, to propose a new measure that identifies critical nodes of station networks. The approach can support the design and redesign of hydrometric station networks. The science of complex networks is a relatively young field and has gained significant momentum over the last few years in different areas such as brain networks, social networks, technological networks, or climate networks. The identification of influential nodes in complex networks is an important field of research. We propose a new node-ranking measure – the weighted degree–betweenness (WDB) measure – to evaluate the importance of nodes in a network. It is compared to previously proposed measures used on synthetic sample networks and then applied to a real-world rain gauge network comprising 1229 stations across Germany to demonstrate its applicability. The proposed measure is evaluated using the decline rate of the network efficiency and the kriging error. The results suggest that WDB effectively quantifies the importance of rain gauges, although the benefits of the method need to be investigated in more detail. KW - identifying influential nodes KW - climate networks KW - rainfall KW - streamflow KW - synchronization KW - precipitation KW - classification KW - events Y1 - 2020 U6 - https://doi.org/10.5194/hess-24-2235-2020 SN - 1027-5606 SN - 1607-7938 VL - 24 IS - 5 SP - 2235 EP - 2251 PB - Copernicus Publ. CY - Göttingen ER - TY - THES A1 - Rodriguez Zuluaga, Juan T1 - Electric and magnetic characteristics of equatorial plasma depletions T1 - Elektrische und magnetische Beschreibung von äquatorialen Plasma-Verarmungen BT - an observational assessment using the Swarm mission BT - eine empirische Beurteilung mit der Satellitenmission Swarm N2 - Near-Earth space represents a significant scientific and technological challenge. Particularly at magnetic low-latitudes, the horizontal magnetic field geometry at the dip equator and its closed field-lines support the existence of a distinct electric current system, abrupt electric field variations and the development of plasma irregularities. Of particular interest are small-scale irregularities associated with equatorial plasma depletions (EPDs). They are responsible for the disruption of trans-ionospheric radio waves used for navigation, communication, and Earth observation. The fast increase of satellite missions makes it imperative to study the near-Earth space, especially the phenomena known to harm space technology or disrupt their signals. EPDs correspond to the large-scale structure (i.e., tens to hundreds of kilometers) of topside F region irregularities commonly known as Spread F. They are observed as depleted-plasma density channels aligned with the ambient magnetic field in the post-sunset low-latitude ionosphere. Although the climatological variability of their occurrence in terms of season, longitude, local time and solar flux is well-known, their day to day variability is not. The sparse observations from ground-based instruments like radars and the few simultaneous measurements of ionospheric parameters by space-based instruments have left gaps in the knowledge of EPDs essential to comprehend their variability. In this dissertation, I profited from the unique observations of the ESA’s Swarm constellation mission launched in November 2013 to tackle three issues that revealed novel and significant results on the current knowledge of EPDs. I used Swarm’s measurements of the electron density, magnetic, and electric fields to answer, (1.) what is the direction of propagation of the electromagnetic energy associated with EPDs?, (2.) what are the spatial and temporal characteristics of the electric currents (field-aligned and diamagnetic currents) related to EPDs, i.e., seasonal/geographical, and local time dependencies?, and (3.) under what conditions does the balance between magnetic and plasma pressure across EPDs occur? The results indicate that: (1.) The electromagnetic energy associated with EPDs presents a preference for interhemispheric flows; that is, the related Poynting flux directs from one magnetic hemisphere to the other and varies with longitude and season. (2.) The field-aligned currents at the edges of EPDs are interhemispheric. They generally close in the hemisphere with the highest Pedersen conductance. Such hemispherical preference presents a seasonal/longitudinal dependence. The diamagnetic currents increase or decrease the magnetic pressure inside EPDs. These two effects rely on variations of the plasma temperature inside the EPDs that depend on longitude and local time. (3.) EPDs present lower or higher plasma pressure than the ambient. For low-pressure EPDs the plasma pressure gradients are mostly dominated by variations of the plasma density so that variations of the temperature are negligible. High-pressure EPDs suggest significant temperature variations with magnitudes of approximately twice the ambient. Since their occurrence is more frequent in the vicinity of the South Atlantic magnetic anomaly, such high temperatures are suggested to be due to particle precipitation. In a broader context, this dissertation shows how dedicated satellite missions with high-resolution capabilities improve the specification of the low-latitude ionospheric electrodynamics and expand knowledge on EPDs which is valuable for current and future communication, navigation, and Earth-observing missions. The contributions of this investigation represent several ’firsts’ in the study of EPDs: (1.) The first observational evidence of interhemispheric electromagnetic energy flux and field-aligned currents. (2.) The first spatial and temporal characterization of EPDs based on their associated field-aligned and diamagnetic currents. (3.) The first evidence of high plasma pressure in regions of depleted plasma density in the ionosphere. These findings provide new insights that promise to advance our current knowledge of not only EPDs but the low-latitude post-sunset ionosphere environment. N2 - Der erdnahe Weltraum stellt eine bedeutende wissenschaftliche und technologische Herausforderung dar. Insbesondere in niedrigeren magnetischen Breitengraden unterstützen die horizontale Geometrie des Magnetfelds und seine geschlossenen Feldlinien das Vorhandensein eines speziellen elektrischen Stromsystems, abrupte Änderungen der elektrischen Felder und das Auftreten von Plasmairregularitäten. Von besonderem Interesse sind regionale Unregelmäßigkeiten im Zusammenhang mit äquatorialen Plasma-Verarmungen (EPDs, Abkürzung aus dem Englischen für „equatorial plasma depletions”). Sie stören trans-ionosphärischer Funkwellen, welche zur Positionierung, Kommunikation und Erd-beobachtung eingesetzt werden. Die schnelle Entwicklung von Satellitenmissionen macht das Verständnis der erdnahen Weltraumphänomene zu einer Priorität, insbesondere derjenigen, welche die Weltraumtechnologie schädigen oder ihre Signale stören können. Die EPDs und die damit verbundenen Plasmairregularitäten sind seit Beginn des Weltraumzeitalters eines der am häufigsten untersuchten Phänomene. EPDs sind großflächigen Strukturen (d. h. zehn bis hundert Kilometer), die auf Spread F Ereignisse zurückgeführt werden können. Sie äußern sich als mit dem Hintergrund-Magnetfeld ausgerichtete Kanäle verarmter Plasmadichte, welche in niedrigen Breiten in der Ionophäre nach Sonnenuntergang auftreten. Obwohl die klimatologische Variabilität des Auftretens von EPDs bezüglich der Jahreszeit, geografischen Länge, Ortszeit und des Sonnenzyklus wohl bekannt sind, trifft dies nicht für ihre Tag-zu-Tag-Variabilität zu. Die spärlichen Beobachtungen von bodengestützten Instrumenten, wie Radargeräten, und die wenigen gleichzeitigen Messungen ionosphärischer Parameter von weltraumgestützten Instrumenten auf erdnahen Umlaufbahnen haben Wissenslücken hinterlassen, die für das Verständnis der Variabilität von EPDs essentiell sind. In dieser Dissertation habe ich von einzigartigen Beobachtungen der im November 2013 gestarteten ESA Satellitenkonstellationsmission „Swarm“ profitiert, um drei Probleme zu bearbeiten, die neue und signifikante Ergebnisse zum aktuellen Wissen über EPDs enthüllten. Ich habe Swarms Messungen der Elektronendichte, des magnetischen und des elektrischen Feldes verwendet, um Folgendes zu beantworten: (1.) In welche Richtung breitet sich die mit den EPDs verbundene elektromagnetische Energie aus? (2.) Was sind die räumlichen und zeitlichen Eigenschaften der elektrischen Ströme (feldgerichtete und diamagnetische Ströme) in Bezug auf EPDs, d. h. wie hängen sie von der geografischen Länge, Jahreszeit und Lokalzeit ab? (3.) Unter welchen Bedingungen findet der mit EPDs verbundene Ausgleich zwischen magnetischem Druck und Plasmadruck statt? Die Ergebnisse zeigen, dass: (1.) Die mit EPDs verbundene elektromagnetische Energie bevorzugt interhemisphärische Strömungen, das heißt, der zugehörige Poynting-Fluss strömt von einer magnetischen Hemisphäre zur anderen und die Strömungsrichtung variiert mit geografischer Länge und Jahreszeit. (2.) Die feldgerichteten Ströme an den Rändern von EPDs sind interhemisphärisch. Im Allgemeinen schließen sie sich in der Hemisphäre mit der höchsten Pedersen-Leitfähigkeit. Die derartige hemisphärische Präferenz zeigt eine Abhängigkeit bezüglich der Jahreszeit/geografischen Länge. Die diamagnetischen Ströme erhöhen oder verringern den magnetischen Druck innerhalb der EPDs. Diese beiden Effekte beruhen auf Variationen der Plasmatemperatur innerhalb der EPDs, die von der geografischen Länge und der Lokalzeit abhängt. (3.) EPDs weisen einen höheren oder niedrigeren Plasmadruck als ihre Umgebung auf. In Niederdruck-EPDs werden die Plasmadruckgradienten meist durch Variationen der Plasmadichte hervorgerufen, sodass Temperaturschwankungen vernachlässigbar sind. Hochdruck-EPDs deuten auf hohe innere Temperaturen hin, etwa das Zweifache der Umgebungstemperatur. Aufgrund ihres häufigeren Auftretens in der Nähe der Südatlantischen Magnetfeldanomalie wird vermutet, dass solche hohen Temperaturen auf den Einfall hochenergetischer Teilchen zurückzuführen sind. In einem breiteren Kontext zeigt diese Dissertation auf, wie spezielle Satellitenmissionen mit hohem Auflösungsvermögen die Spezifikation der ionoshärischen Elektrodynamik in niedrigen Breiten und das Verständnis von EPDs verbessern, was wertvoll für aktuelle und zukünfte Kommunikatoins-, Positionierungs- sowie Erdbeobachtungsmissionen ist. Die Beiträge dieser Arbeit stellen gleich mehrere "Premieren" in der EPD-Forschung dar: (1.) Der erste empirische Nachweis interhemisphärischer elektromagnetischer Energieflüsse und feldgerichteter Ströme. (2.) Die erste raum-zeitliche Beschreibung von EPDs auf der Grundlage ihrer assoziierten feldgerichteten und diamagnetischen Ströme. (3.) Der erste Nachweis hohen Plasmadrucks in Regionen verminderter Plasmadichte in der Ionosphäre. Diese Forschungsergebnisse liefern neue Erkenntnisse, die nicht nur unser derzeitiges Wissen über EPDs, sondern auch jenes über die ionosphärische Domaine in niedrigen Breiten nach Sonnenuntergang fördert. KW - equatorial plasma depletions KW - electric and magnetic fields KW - spread F KW - ionosphere KW - swarm mission KW - äquatorialen Plasma-Verarmungen KW - elektrische und magnetische Felder KW - Spread F KW - Ionosphäre KW - Satellitenmission Swarm Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-445873 ER - TY - THES A1 - Schimpf, Stefan T1 - Herkunft und Ablagerungsmilieu quartärer Sedimente im Einzugsgebiet des Heihe, NW China N2 - Der zentralasiatische Naturraum, wie er sich uns heute präsentiert, ist das Ergebnis eines Zusammenwirkens vieler verschiedener Faktoren über Jahrmillionen hinweg. Im aktuellen Kontext des Klimawandels zeigt sich jedoch, wie stark sich Stoffflüsse auch kurzfristig ändern und dabei das Gesicht der Landschaft verwandeln können. Die Gobi-Wüste in der Inneren Mongolei (China), als Teil der gleichnamigen Trockenregionen Nordwestchinas, ist aufgrund der Ausgestaltung ihrer landschaftsprägenden Elemente sowie ihrer Landschaftsdynamik, im Zusammenhang mit der Lage zum Tibet-Plateau, in den Fokus der klimageschichtlichen Grundlagenforschung gerückt. Als großes Langzeitarchiv unterschiedlichster fluvialer, lakustriner und äolischer Sedimente stellt sie eine bedeutende Lokalität zur Rekonstruktion von lokalen und regionalen Stoffflüssen dar.. Andererseits ist die Gobi-Wüste zugleich auch eine bedeutende Quelle für den überregionalen Staubtransport, da sie aufgrund der klimatischen Bedingungen insbesondere der Erosion durch Ausblasung preisgegeben wird. Vor diesem Hintergrund erfolgten zwischen 2011 und 2014, im Rahmen des BMBF-Verbundprogramms WTZ Zentralasien – Monsundynamik & Geoökosysteme (Förderkennzeichen 03G0814), mehrere deutsch-chinesische Expeditionen in das Ejina-Becken (Innere Mongolei) und das Qilian Shan-Vorland. Im Zuge dieser Expeditionen wurden für eine Bestimmung potenzieller Sedimentquellen erstmals zahlreiche Oberflächenproben aus dem gesamten Einzugsgebiet des Heihe (schwarzer Fluss) gesammelt. Zudem wurden mit zwei Bohrungen im inneren des Ejina-Beckens, ergänzende Sedimentbohrkerne zum bestehenden Bohrkern D100 (siehe Wünnemann (2005)) abgeteuft, um weit reichende, ergänzende Informationen zur Landschaftsgeschichte und zum überregionalen Sedimenttransfer zu erhalten. Gegenstand und Ziel der vorliegenden Doktorarbeit ist die sedimentologisch-mineralogische Charakterisierung des Untersuchungsgebietes in Bezug auf potenzielle Sedimentquellen und Stoffflüsse des Ejina-Beckens sowie die Rekonstruktion der Ablagerungsgeschichte eines dort erbohrten, 19m langen Sedimentbohrkerns (GN100). Schwerpunkt ist hierbei die Klärung der Sedimentherkunft innerhalb des Bohrkerns sowie die Ausweisung von Herkunftssignalen und möglichen Sedimentquellen bzw. Sedimenttransportpfaden. Die methodische Herangehensweise basiert auf einem Multi-Proxy-Ansatz zur Charakterisierung der klastischen Sedimentfazies anhand von Geländebeobachtungen, lithologisch-granulometrischen und mineralogisch-geochemischen Analysen sowie statistischen Verfahren. Für die mineralogischen Untersuchungen der Sedimente wurde eine neue, rasterelektronenmikroskopische Methode zur automatisierten Partikelanalyse genutzt und den traditionellen Methoden gegenübergestellt. Die synoptische Betrachtung der granulometrischen, geochemischen und mineralogischen Befunde der Oberflächensedimente ergibt für das Untersuchungsgebiet ein logisches Kaskadenmodell mit immer wiederkehrenden Prozessbereichen und ähnlichen Prozesssignalen. Die umfangreichen granulometrischen Analysen deuten dabei auf abnehmende Korngrößen mit zunehmender Entfernung vom Qilian Shan hin und ermöglichen die Identifizierung von vier texturellen Signalen: den fluvialen Sanden, den Dünensanden, den Stillwassersedimenten und Stäuben. Diese Ergebnisse können als Interpretationsgrundlage für die Korngrößenanalysen des Bohrkerns genutzt werden. Somit ist es möglich, die Ablagerungsgeschichte der Bohrkernsedimente zu rekonstruieren und in Verbindung mit eigenen und literaturbasierten Datierungen in einen Gesamtkontext einzuhängen. Für das Untersuchungsgebiet werden somit vier Ablagerungsphasen ausgewiesen, die bis in die Zeit des letzten glazialen Maximums (LGM) zurückreichen. Während dieser Ablagerungsphasen kam es im Zuge unterschiedlicher Aktivitäts- und Stabilitätsphasen zu einer kontinuierlichen Progradation und Überprägung des Schwemmfächers. Eine besonders aktive Phase kann zwischen 8 ka und 4 ka BP festgestellt werden, während der es aufgrund zunehmender fluvialer Aktivitäten zu einer deutlich verstärkten Schwemmfächerdynamik gekommen zu sein scheint. In den Abschnitten davor und danach waren es vor allem äolische Prozesse, die zu einer Überprägung des Schwemmfächers geführt haben. Hinsichtlich der mineralogischen Herkunftssignale gibt es eine große Variabilität. Dies spiegelt die enorme Heterogenität der Geologie des Untersuchungsgebietes wider, wodurch die räumlichen Signale nicht sehr stark ausgeprägt sind. Dennoch, können für das Einzugsgebiet drei größere Bereiche deklariert werden, die als Herkunftsgebiet in Frage kommen. Das östliche Qilian Shan Vorland zeichnet sich dabei durch deutlich höhere Chloritgehalte als primäre Quelle für die Sedimente im Ejina-Becken aus. Sie unterscheiden sich insbesondere durch stark divergierende Chloritgehalte in der Tonmineral- und Gesamtmineralfraktion, was das östliche Qilian Shan Vorland als primäre Quelle für die Sedimente im Ejina-Becken auszeichnet. Dies steht in Zusammenhang mit den Grünschiefern, Ophioliten und Serpentiniten in diesem Bereich. Geochemisch deutet vor allem das Cr/Rb-Verhältnis eine große Variabilität innerhalb des Einzugsgebietes an. Auch hier ist es das östliche Vorland, welches aufgrund seines hohen Anteils an mafischen Gesteinen reich an Chromiten und Spinellen ist und sich somit vom restlichen Untersuchungsgebiet abhebt. Die zeitliche aber auch die generelle Variabilität der Sedimentherkunft lässt sich in den Bohrkernsedimenten nicht so deutlich nachzeichnen. Die mineralogisch-sedimentologischen Eigenschaften der erbohrten klastischen Sedimente zeugen zwar von zwischenzeitlichen Änderungen bei der Sedimentherkunft, diese sind jedoch nicht so deutlich ausgeprägt, wie es die Quellsignale in den Oberflächensedimenten vermuten lassen. Ein Grund dafür scheint die starke Vermischung unterschiedlichster Sedimente während des Transportes zu sein. Die Kombination der Korngrößenergebnisse mit den Befunden der Gesamt- und Schwermineralogie deuten darauf hin, dass es zwischenzeitlich eine Phase mit überwiegend äolischen Prozessen gegeben hat, die mit einem Sedimenteintrag aus dem westlichen Bei Shan in Verbindung stehen. Neben der Zunahme ultrastabiler Schwerminerale wie Zirkon und Granat und der Abnahme opaker Schwerminerale, weisen vor allem die heutigen Verhältnisse darauf hin. Der Vergleich der traditionellen Schwermineralanalyse mit der Computer-Controlled-Scanning-Electron-Microscopy (kurz: CCSEM), die eine automatisierte Partikelauswertung der Proben ermöglicht, zeigt den deutlichen Vorteil der modernen Analysemethode. Neben einem zeitlichen Vorteil, den man durch die automatisierte Abarbeitung der vorbereiteten Proben erlangen kann, steht vor allem die deutlich größere statistische Signifikanz des Ergebnisses im Vordergrund. Zudem können mit dieser Methode auch chemische Varietäten einiger Schwerminerale bestimmt werden, die eine noch feinere Klassifizierung und sicherere Aussagen zu einer möglichen Sedimentherkunft ermöglichen. Damit ergeben sich außerdem verbesserte Aussagen zu Zusammensetzungen und Entstehungsprozessen der abgelagerten Sedimente. Die Studie verdeutlicht, dass die Sedimentherkunft innerhalb des Untersuchungsgebietes sowie die ablaufenden Prozesse zum Teil stark von lokalen Gegebenheiten abhängen. Die Heterogenität der Geologie und die Größe des Einzugsgebietes sowie die daraus resultierende Komplexität der Sedimentgenese, machen exakte Zuordnungen zu klar definierten Sedimentquellen sehr schwer. Dennoch zeigen die Ergebnisse, dass die Sedimentzufuhr in das Ejina-Becken in erster Linie durch fluviale klastische Sedimente des Heihe aus dem Qilian Shan erfolgt sein muss. Die Untersuchungsergebnisse zeigen jedoch ebenso die Notwendigkeit einer ergänzenden Bearbeitung angrenzender Untersuchungsgebiete, wie beispielsweise den Gobi-Altai im Norden oder den Beishan im Westen, sowie die Verdichtung der Oberflächenbeprobung zur feineren Auflösung von lokalen Sedimentquellen. N2 - The Central Asian natural space, as it presents itself today, is the result of a combination of many different factors over millions of years. However, in the current context of climate change it becoming obvious how strongly material fluxes can change in the short-term and thereby transform the face of the landscape. As a large long-term archive of different fluvial, lacustrine and aeolian sediments, the Gobi Desert in Inner Mongolia (China) represents a significant locality for the reconstruction of local and regional material flows as well as an important source for supra-regional dust transport due to erosion by aeolian processes. This, in connection with its location to the Tibetan Plateau, has moved the Gobi Desert into the focus of climate-historical basic research. Against this background, several German-Chinese expeditions to Ejina Basin (Inner Mongolia) and the Qilian Shan foreland were accomplished between 2011 and 2014. They were part of the BMBF joint program WTZ Central Asia - Monsoon Dynamics & Geo-Ecosystems (Grant No. 03G0814). In the course of these expeditions numerous surface samples from the entire catchment area of the Heihe (Black River) were collected for the determination of potential sediment sources. Additionally, two drillings in the interior of the Ejina Basin were conducted as a continuation of the existing drill-core D100 (see Wünnemann (2005)) and for gathering complementary information on landscape history and supra-regional sediment transfer. The goals of this doctoral thesis are a sedimentological-mineralogical characterization of the study area with regard to potential sediment sources and material fluxes of the Ejina Basin as well as the reconstruction of the sedimentation history of a 19 m sediment drill-core (GN100) drilled in the northern part of the basin. The main focus is on the clarification of the sediment provenance within the drill core as well as the designation of provenance signals and possible sediment sources or sediment transport paths. The methodological approach is based on a multi-proxy approach to characterize the clastic sedimentary facies using field observations, lithological-granulometric and mineralogical-geochemical analyses as well as statistical methods. For the mineralogical investigations of the sediments, a new scanning electron microscopic method for automated particle analysis was used and compared with traditional methods. The synoptic analysis of the granulometric, geochemical and mineralogical findings of the surface sediments result in a logical cascade model with recurring process areas and similar process signals. The results of the extensive granulometric analyses indicate decreasing grain sizes as the distance from the Qilian Shan increases and allow the identification of four textural signals: fluvial sands, dune sands, still water sediments and dusts. They can be used as the basis of interpretation for the grain size analyses of the drill core. This makes it possible to reconstruct the depositional history of the core sediments and to put them in an overall context in conjunction with own and literature-based datings. For the study area four depositional phases can be identified which date back until the time of the Last Glacial Maximum (LGM). During these depositional phases, various phases of activity and stability led to a continuous progradation and overprinting of the alluvial fan. A particularly active phase can be observed between 8 ka and 4 ka BP. During this period there seems to have been a significant increase in alluvial fan dynamics due to increasing fluvial activity. In the periods before and after mainly aeolian processes have led to an overprinting of the alluvial fan. Regarding the mineralogical provenance signals there is a great variability. This reflects the enormous geological heterogeneity of the study area, by which the spatial signals are not very pronounced. Nonetheless, within the catchment three larger areas can be declared which can be considered as possible sediment sources. These are the eastern and western foreland of the Qilian Shan mountains as wells as the Bei Shan in the west of the Ejina basin. They differ, in particular, from strongly diverging chlorite contents in the clay mineral and total mineral fraction. The eastern Qilian Shan foreland is characterized by significantly higher chlorite contents as the primary source for the sediments in the Ejina Basin. This is related to the greenschists, ophiolites and serpentinites in this area. Geochemically, the Cr/Rb-ratio in particular indicates a large variability within the catchment area. In this case its again the eastern Qilian Shan foreland which stands out from the rest of the study area with high values due to its high proportion of mafic rocks which are rich in chromites and spinels. Within the drill core sediments of GN100 the temporal but also the general variability of the sediment provenance according to the surface sediment results cannot be clearly traced. The mineralogical-sedimentological characteristics of the drilled clastic sediments exhibit meantime changes in sediment provenance. However, they are not as pronounced as the source signals within the surface sediments suggest. One reason seems to be the strong mixing of different sediments during transport. The combination of the particle size results with the results of the total and heavy mineralogy indicate that there must have been a phase in the meantime with predominantly aeolian processes.. These processes were connected with a sediment input from the Bei Shan mountains in the west. In addition to the increase in ultrastable heavy minerals such as zirconium and garnet and the decline of opaque heavy minerals, mainly present conditions point to this. The comparison of the traditional heavy mineral analysis (polarized light microscopy) with computer-controlled scanning electron microscopy (short: CCSEM) shows the clear advantage of the modern analysis method. Above all is the significant greater statistical significance of the counting results. In addition, this method can also be used to determine chemical varieties of some heavy minerals, which allows an even finer classification and more reliable conclusions about a possible sediment provenance. Furthermore, better statements can be made about the composition and the development process of the deposited sediments. This thesis shows that the sediment provenance within the study area as well as the ongoing processes partly depend strongly on local conditions. Therefore, the heterogeneity of the geology and the size of the catchment as well as the resulting complexity of the sediment genesis makes it very difficult to make exact assignments to clearly defined sediment sources. Nevertheless, the results indicate a primary input of fluvial clastic sediments of the Heihe coming from the Qilian Shan mountains. However, the findings also indicate the need to complement the study with adjacent study areas such as the Gobi Altai in the north or the Beishan in the west as well as a densification of the surface sampling for a better resolution of possible local sediment sources. KW - Heihe KW - Ejina Becken KW - Gaxun Nur KW - Schwerminerale KW - China KW - CCSEM KW - Herkunftsanalyse KW - Tonminerale KW - Heihe KW - Ejina Basin KW - Gaxun Nur KW - Heavy Minerals KW - China KW - CCSEM KW - Provenance Analysis KW - Clay Minerals Y1 - 2020 ER - TY - THES A1 - Liu, Sibiao T1 - Controls of foreland-deformation patterns in the orogen-foreland shortening system N2 - The Andean Plateau (Altiplano-Puna Plateau) of the southern Central Andes is the second-highest orogenic plateau on our planet after Tibet. The Andean Plateau and its foreland exhibit a pronounced segmentation from north to south regarding the style and magnitude of deformation. In the Altiplano (northern segment), more than 300 km of tectonic shortening has been recorded, which started during the Eocene. A well-developed thin-skinned thrust wedge located at the eastern flank of the plateau (Subandes) indicates a simple-shear shortening mode. In contrast, the Puna (southern segment) records approximately half of the shortening of the Altiplano - and the shortening started later. The tectonic style in the Puna foreland switches to a thick-skinned mode, which is related to pure-shear shortening. In this study, carried out in the framework of the StRATEGy project, high-resolution 2D thermomechanical models were developed to systematically investigate controls of deformation patterns in the orogen-foreland pair. The 2D and 3D models were subsequently applied to study the evolution of foreland deformation and surface topography in the Altiplano-Puna Plateau. The models demonstrate that three principal factors control the foreland-deformation patterns: (i) strength differences in the upper lithosphere between the orogen and its foreland, rather than a strength difference in the entire lithosphere; (ii) gravitational potential energy of the orogen (GPE) controlled by crustal and lithospheric thicknesses, and (iii) the strength and thickness of foreland-basin sediments. The high-resolution 2D models are constrained by observations and successfully reproduce deformation structures and surface topography of different segments of the Altiplano-Puna plateau and its foreland. The developed 3D models confirm these results and suggest that a relatively high shortening rate in the Altiplano foreland (Subandean foreland fold-and-thrust belt) is due to simple-shear shortening facilitated by thick and mechanically weak sediments, a process which requires a much lower driving force than the pure-shear shortening deformation mode in the adjacent broken foreland of the Puna, where these thick sedimentary basin fills are absent. Lower shortening rate in the Puna foreland is likely accommodated in the forearc by the slab retreat. N2 - Das Andenplateau (Altiplano-Puna-Plateau) in den südlichen Zentralanden ist nach Tibet das zweithöchste orogene Plateau auf unserem Planeten. Dieses Plateau und sein Vorland weisen eine ausgeprägte Segmentierung von Nord nach Süd hinsichtlich Art und Ausmaß der Verformung auf. Im Altiplano (nördliches Segment) wird seit der im Eozän stattfindenden Deformation mehr als 300 km tektonische Verkürzung dokumentiert. Ein gut entwickelter sedimentärer Schubkeil bzw. Vorland-Überschiebungsgürtel (Subandin) an der Ostflanke des Plateaus (thin-skinned foreland deformation) deutet in dieser Region des Vorlandes auf Prozesse einfacher Scherung hin (simple-shear modus). Im Gegensatz dazu weist die Puna (südliches Plateausegment) ungefähr die Hälfte der Verkürzung des Altiplano auf - und die Verkürzung begann später. Außerdem geht der tektonische Stil im Puna-Vorland zu einem zerbrochenen Vorland mit Kristallinblöcken (thick-skinned foreland) über, der mit der Verkürzung durch reine Scherung (pure-shear modus) erklärt werden kann. In dieser Studie, die im Rahmen des StRATEGy-Projekts durchgeführt wurde, wurden hochauflösende thermomechanische 2D-Modelle entwickelt, um systematisch die Kontrolle von Verformungsmustern im Orogen-Vorland-Paar zu untersuchen. Die 2D- und 3D-Modelle wurden anschließend angewendet, um die Entwicklung der Vorlanddeformation und der Oberflächentopographie im Altiplano-Puna-Plateau zu verstehen. Die Modelle zeigen, dass drei Hauptfaktoren die Deformationsmuster des Vorlandes steuern: (i) Festigkeitsunterschiede in der oberen Lithosphäre zwischen dem Orogen und seinem Vorland - und nicht Festigkeitsunterschiede in der gesamten Lithosphäre; (ii) die gravitationsbezogene potentielle Energie des Orogens (GPE), die durch die Krusten- und Lithosphärenmächtigkeit gesteuert wird und (iii) die Festigkeit sowie Mächtigkeiten der Vorlandbeckensedimente. Die hochauflösenden 2D-Modelle sind auf tatsächliche Daten aus Beobachtungen beschränkt und reproduzieren erfolgreich Deformationsstrukturen sowie die topographischen Verhältnisse der verschiedenen Segmente des Altiplano-Puna-Plateaus und seines Vorlandes. Die entwickelten 3D-Modelle bestätigen diese Ergebnisse und legen nahe, dass die relativ hohe Verkürzungsrate im Altiplano-Vorland (Subandin) bei den vorhandenen mächtigen Sedimentabfolgen geringer mechanischer Festigkeit weniger Kraftaufwand erfordert als die Deformation des Puna-Vorlandes, wo diese Sedimente weitgehend fehlen. Die geringeren Verkürzungsbeträge im Puna-Vorland werden wahrscheinlich durch das Zurückweichen der Subduktionszone im Forearc-Bereich ausgeglichen. KW - geodynamics KW - numerical modeling KW - Central Andes KW - foreland deformation KW - geophysics KW - Geodynamik KW - numerische Modellierung KW - Zentralanden KW - Vorlanddeformation KW - Geophysik Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-445730 ER - TY - THES A1 - Karamzadeh Toularoud, Nasim T1 - Earthquake source and receiver array optimal configuration T1 - Optimale Konfiguration von Quell- und Empfängerarray für Erdbeben N2 - Seismic receiver arrays have variety of applications in seismology, particularly when the signal enhancement is a prerequisite to detect seismic events, and in situations where installing and maintaining sparse networks are impractical. This thesis has mainly focused on the development of a new approach for seismological source and receiver array design.The proposed approach deals with the array design task as an optimization problem. The criteria and prerequisite constraints in array design task are integrated in objective function definition and evaluation of a optimization process. Three cases are covered in this thesis: (1) a 2-D receiver array geometry optimization, (2) a 3-D source array optimization, and (3) an array application to monitor microseismic data, where the effect of different types of noise are evaluated. A flexible receiver array design framework implements a customizable scenario modelling and optimization scheme by making use of synthetic seismograms. Using synthetic seismograms to evaluate array performance makes it possible to consider additional constraints, e.g. land ownership, site-specific noise levels or characteristics of the seismic sources under investigation. The use of synthetic array beamforming as an array design criteria is suggested. The framework is customized by designing a 2-D small scale receiver array to monitor earthquake swarm activity in northwest Bohemia/ Vogtland in central Europe. Two sub-functions are defined to verify the accuracy of horizontal slowness estimation; one to suppress aliasing effects due to possible secondary lobes of synthetic array beamforming calculated in horizontal slowness space, and the other to reduce the event's mislocation caused by miscalculation of the horizontal slowness vector. Subsequently, a weighting technique is applied to combine the sub-functions into one single scalar objective function to use in the optimization process. The idea of optimal array is employed to design a 3-D source array, given a well-located catalog of events. The conditions to make source arrays are formulated in four objective functions and a weighted sum technique is used to combine them in one single scalar function. The criteria are: (1) accurate slowness vector estimation, (2) high waveform coherency, (3) low location error and (4) high energy of coda phases. The method is evaluated by two experiments, (1) a synthetic test using realistic synthetic seismograms, (2) using real seismograms, and for each case optimized SA elements are configured using the data from the Vogtland area. The location of a possible scatterer in the velocity model, that makes the converted/reflected phases, e.g. sp-phases, is retrieved by a grid search method using the optimized SA. The accuracy of the approach and the obtained results demonstrated that the method is applicable to study the crustal structure and the location of crustal scatterers when the strong converted phases are observed in the data and a well-located catalog is available. Small aperture arrays are employed in seismology for a variety of applications, ranging from pure event detection to monitor and study of microcosmic activities. The monitoring of microseismicity during temporary human activities is often difficult, as the signal-to-noise ratio is very low and noise is strongly increased during the operation. The combination of small aperture seismic arrays with shallow borehole sensors offers a solution. We tested this monitoring approach at two different sites, (1) accompanying a fracking experiment in sedimentary shale at 4~km depth, and (2) above a gas field under depletion. Arrays recordings are compared with recordings available from shallow borehole sensors and examples of detection and location performance of the array are given. The effect of different types of noise at array and borehole stations are compared and discussed. N2 - Seismische Arrays haben eine Vielzahl von Anwendungen in der Seismologie, insbesondere wenn die Signalverbesserung eine Voraussetzung ist für die seismische Ereignisse erkennen, und in Situationen, in denen die Installation und Wartung spärlicher Netzwerke ist unpraktisch. Diese Arbeit hat sich vor allem auf die Entwicklung eines neuen Ansatzes für seismologische Quellen und Empfänger-Array-Design konzentriert. Der vorgeschlagene Ansatz beschäftigt sich mit der Array-Design-Aufgabe als Optimierungsproblem. Die notwendigen Kriterien und Randbedingungen, die für die seismologische Array-Design-Aufgabe wichtig sind, werden in die objektive Funktionsdefinition und Bewertung eines Optimierungsprozesses integriert. In dieser Arbeit werden drei Fälle behandelt. (1) eine 2-D-Empfänger-Array-Geometrieoptimierung, (2) eine 3D-Quellfeldoptimierung, und (3) eine Array-Anwendung zum Überwachen mikroseismischer Daten, wobei die Auswirkungen verschiedener Arten von Lärm werden bewertet. Ein flexibles Empfänger-Array-Design-Framework wird eingeführt, das ein anpassbares Szenario-Modellierungs- und Optimierungsschema unter Verwendung synthetischer Seismogramme implementiert. Die Verwendung synthetischer Seismogramme zur Bewertung der Array-Leistung ermöglicht es, zusätzliche Einschränkungen, wie z.B. Landbesitz, zu berücksichtigen, standortspezifische Lärmpegel oder Eigenschaften der seismischen Quellen unter Berücksichtigung von Untersuchung. Die Verwendung von synthetischem Array-Strahlformung als Array-Design-Kriterium wird vorgeschlagen. Das Array-Design-Framework wird durch die Entwicklung eines 2-D-Kleinempfänger-Arrays zur Überwachung der Erdbebenschwarmaktivität im Vogtland in Mitteleuropa angepasst. Es werden zwei Teilfunktionen definiert, um die Genauigkeit der horizontalen Langsamkeitsschätzung zu überprüfen. Eine zur Unterdrückung von Aliasing-Effekten aufgrund möglicher Nebenkeulen der synthetischen Strahlformung, berechnet im horizontalen Langsamkeitsraum, und zum anderen, um die Fehlstellung des Ereignisses durch eine Fehlberechnung des horizontalen Langsamkeitsvektors zu reduzieren. Anschliessend wird eine Gewichtungstechnik angewendet, um die Kombination von die Unterfunktionen zu einer einzigen skalaren Zielfunktion zusammenfassen, die in der Optimierungsprozess verwendet werden kann. Die Idee des Array Optimal Design wird verwendet, um ein 3-D Source Array zu entwerfen, das einen gut lokalisierten Katalog von Erdbebenereignissen enthält. Die Bedingungen für die Herstellung von Quellarrays werden in vier Zielfunktionen formuliert, und eine gewichtete Summentechnik wird verwendet, um sie in einer einzigen skalaren Funktion zu kombinieren. Die Kriterien sind: (1) genaue Langsamkeitsvektorschätzung, (2) hohe Wellenform-Kohärenz, (3) niedriger Ortsfehler und (4) bis hohe Energie der Coda-Phasen. Die Methode wird durch zwei Experimente bewertet, (1) ein synthetischer Test mit realistischen synthetischen Seismogrammen, (2) mit realen Seismogrammen und optimierte SA-Elemente werden für jeden Fall unter Verwendung der Daten aus dem Vogtland gefunden. Die Position eines möglichen Streuers im Geschwindigkeitsmodell, der die konvertierten/reflektierten Phasen, z.B. sp-Phasen, erzeugt, wird durch ein Rastersuchverfahren mit dem optimierten SA ermittelt. Die Genauigkeit des Ansatzes und die erhaltenen Ergebnisse sind überzeugend, dass die Methode anwendbar ist, um die Krustenstruktur und die Position von Krustalstreuern zu untersuchen, wenn die stark konvertierten Phasen in den Daten beobachtet werden und ein gut lokalisierter Katalog verfügbar ist. Die Überwachung der Mikroseismizität bei solchen temporären menschlichen Aktivitäten ist oft schwierig, da der Signal-Rausch-Verhältnis sehr niedrig ist und das Rauschen während des Betriebs stark erhöht wird. Die Kombination von seismischen Arrays mit kleiner Apertur und flachen Bohrlochsensoren bietet eine Lösung. Wir haben diesen Überwachungsansatz an zwei verschiedenen Standorten getestet. (1) Begleiten eines Fracking-Experiments in sedimentärem Schiefer in 4 km Tiefe und (2) über einem Gasfeld unter Erschöpfung. Die Aufzeichnungen von Arrays werden mit den Aufzeichnungen von flachen Bohrlochsensoren verglichen, und es werden Beispiele für die Detektions- und Standortleistung der Arrays gegeben. Die Auswirkungen verschiedener Arten von Lärm an Array- und Bohrlochstationen werden verglichen und diskutiert. KW - seismic array KW - earthquake source array KW - array design KW - optimal array configuration KW - source array optimal design KW - scatterer location KW - scattered phases KW - seismicity modelling KW - synthetic array beam power KW - Array-Entwurf KW - Erdbebenquellen-Array KW - optimale Array-Konfiguration KW - gestreute Phasen KW - Standort des Streuers KW - seismisches Array KW - Seismizitätsmodellierung KW - Quell-Array optimales Design KW - synthetische Array-Strahlleistung Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-459828 ER - TY - THES A1 - Nooshiri, Nima T1 - Improvement of routine seismic source parameter estimation based on regional and teleseismic recordings T1 - Verbesserung von Standard-Verfahren zur Abschätzung von seismischen Quellparametern auf regionalen und teleseismischen Distanzen N2 - Seismological agencies play an important role in seismological research and seismic hazard mitigation by providing source parameters of seismic events (location, magnitude, mechanism), and keeping these data accessible in the long term. The availability of catalogues of seismic source parameters is an important requirement for the evaluation and mitigation of seismic hazards, and the catalogues are particularly valuable to the research community as they provide fundamental long-term data in the geophysical sciences. This work is well motivated by the rising demand for developing more robust and efficient methods for routine source parameter estimation, and ultimately generation of reliable catalogues of seismic source parameters. Specifically, the aim of this work is to develop some methods to determine hypocentre location and temporal evolution of seismic sources based on regional and teleseismic observations more accurately, and investigate the potential of these methods to be integrated in near real-time processing. To achieve this, a location method that considers several events simultaneously and improves the relative location accuracy among nearby events has been provided. This method tries to reduce the biasing effects of the lateral velocity heterogeneities (or equivalently to compensate for limitations and inaccuracies in the assumed velocity model) by calculating a set of timing corrections for each seismic station. The systematic errors introduced into the locations by the inaccuracies in the assumed velocity structure can be corrected without explicitly solving for a velocity model. Application to sets of multiple earthquakes in complex tectonic environments with strongly heterogeneous structure such as subduction zones and plate boundary region demonstrate that this relocation process significantly improves the hypocentre locations compared to standard locations. To meet the computational demands of this location process, a new open-source software package has been developed that allows for efficient relocation of large-scale multiple seismic events using arrival time data. Upon that, a flexible location framework is provided which can be tailored to various application cases on local, regional, and global scales. The latest version of the software distribution including source codes, a user guide, an example data set, and a change history, is freely available to the community. The developed relocation algorithm has been modified slightly and then its performance in a simulated near real-time processing has been evaluated. It has been demonstrated that applying the proposed technique significantly reduces the bias in routine locations and enhance the ability to locate the lower magnitude events using only regional arrival data. Finally, to return to emphasis on global seismic monitoring, an inversion framework has been developed to determine the seismic source time function through direct waveform fitting of teleseismic recordings. The inversion technique can be systematically applied to moderate- size seismic events and has the potential to be performed in near real-time applications. It is exemplified by application to an abnormal seismic event; the 2017 North Korean nuclear explosion. The presented work and application case studies in this dissertation represent the first step in an effort to establish a framework for automatic, routine generation of reliable catalogues of seismic event locations and source time functions. N2 - Seismologische Dienste spielen eine wichtige Rolle in der seismologischen Forschung und Gefährdungsanalyse, indem sie Quellparameter für seismische Ereignisse (Lokalisierung, Stärke, Mechanismus) bereitstellen und diese Daten langfristig verfügbar machen. Die Verfügbarkeit von Katalogen seismischer Quellparameter ist eine wichtige Voraussetzung für die Bewertung der seismischen Gefährdung und Minderung der Auswirkungen von Erdbeben. Die seismischen Kataloge sind für die Forschungsgemeinschaft besonders wertvoll, da sie grundlegende Hintergrundsdaten über lange Zeiträume liefern. Die vorliegende Arbeit ist motiviert durch die steigende Nachfrage nach der Entwicklung robusterer und effizienterer Methoden für die routinemäßige Schätzung von Quellparametern und schließlich die Verbesserung der Qualität und Quantität der seismischen Kataloge. Ziel dieser Arbeit ist es insbesondere Methoden zu entwickeln, um die Lokalisierung von Hypozentren und die zeitliche Entwicklung der Momentfreisetzung bei einem Erdbeben auf der Grundlage regionaler und teleseismischer Beobachtungen genauer zu bestimmen, und das Potenzial dieser Methoden für eine zeitnahe Verarbeitung zu untersuchen. Um dies zu erreichen, wurde eine Lokalisierungsmethode bereitgestellt, die mehrere Ereignisse gleichzeitig berücksichtigt und die relative Genauigkeit der Hypozentren zwischen benachbarten Ereignissen verbessert. Dieses Verfahren versucht, die Verzerrungen durch Geschwindigkeits-heterogenitäten zu reduzieren, oder äquivalent Einschränkungen und Ungenauigkeiten in dem angenommenen Geschwindigkeitsmodell auszugleichen, indem richtungsabhängige Zeitkorrekturen für jede seismische Station berechnet werden. Die systematischen Fehler, die durch die Ungenauigkeiten in der angenommenen Geschwindigkeitsstruktur in die Lokalisierung projiziert werden, können korrigiert werden, ohne explizit nach einem Geschwindigkeitsmodell zu lösen. Die Anwendung auf Ensemble von Erdbeben in tektonischen Situationen mit stark heterogener, komplexer Struktur wie Subduktionszonen und Plattengrenzregionen zeigt, dass diese Relokalisierung die Hypozentren im Vergleich zu Standardlokalisierungen signifikant verbessert. Um den rechnerischen Anforderungen der Lokalisierung gerecht zu werden, wurde ein neues Open-Source-Softwarepaket entwickelt, das eine effiziente Relokalisierung einer großen Anzahl von Erdbeben unter Verwendung von Ankunftszeitdaten ermöglicht. Daraufhin wird ein flexibler Lokalisierungsrahmen bereitgestellt, der an verschiedene Fälle auf lokaler, regionaler und globaler Ebene angepasst werden kann. Die neueste Version der Software einschließlich Quellcodes, Benutzerhandbuch, Beispieldatensatz und Änderungsverlauf ist für die Öffentlichkeit frei verfügbar. Der entwickelte Relokalisierungs-Algorithmus wurde geringfügig verändert und anschließend seine Leistung in einem simulierten Echtzeit Prozess bewertet. Es zeigte sich, dass die Anwendung der vorgeschlagenen Technik die Verzerrung der Hypozentren der Routineauswertung erheblich verringert und die Fähigkeit zum Lokalisieren der Ereignisse mit niedriger Magnitude unter Verwendung nur regionaler Ankunftsdaten verbessert. Um sich wieder auf die globale seismische Überwachung zu konzentrieren, wurde schließlich ein Inversionssystem entwickelt, um die Zeitfunktion der seismischen Quelle durch direkte Wellenformanpassung von teleseismischen Aufzeichnungen zu bestimmen. Die Inversionstechnik kann systematisch auf seismische Ereignisse mittlerer Größe angewendet werden und hat das Potenzial, in nahezu Echtzeitanwendungen ausgeführt zu werden. Dies wird beispielhaft durch die Anwendung auf ein abnormales seismisches Ereignis veranschaulicht: die nordkoreanische Atomexplosion 2017. Die in dieser Dissertation vorgestellten Arbeits- und Anwendungsfallstudien stellen den ersten Schritt dar, um einen Rahmen für die automatische, routinemäßige Erzeugung zuverlässiger Kataloge von seismischen Ereignisorten und Quellzeitfunktion zu schaffen. KW - observational seismology KW - earthquake bulletin data KW - seismic event localization KW - seismic source-time function estimation KW - beobachtende Seismologie KW - Erdbebenkatalogdaten KW - seismische Ereignislokalisierung KW - Herdzeit Parameter Abschätzung Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-459462 ER - TY - GEN A1 - Crisologo, Irene A1 - Heistermann, Maik T1 - Using ground radar overlaps to verify the retrieval of calibration bias estimates from spaceborne platforms T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Many institutions struggle to tap into the potential of their large archives of radar reflectivity: these data are often affected by miscalibration, yet the bias is typically unknown and temporally volatile. Still, relative calibration techniques can be used to correct the measurements a posteriori. For that purpose, the usage of spaceborne reflectivity observations from the Tropical Rainfall Measuring Mission (TRMM) and Global Precipitation Measurement (GPM) platforms has become increasingly popular: the calibration bias of a ground radar (GR) is estimated from its average reflectivity difference to the spaceborne radar (SR). Recently, Crisologo et al. (2018) introduced a formal procedure to enhance the reliability of such estimates: each match between SR and GR observations is assigned a quality index, and the calibration bias is inferred as a quality-weighted average of the differences between SR and GR. The relevance of quality was exemplified for the Subic S-band radar in the Philippines, which is greatly affected by partial beam blockage. The present study extends the concept of quality-weighted averaging by accounting for path-integrated attenuation (PIA) in addition to beam blockage. This extension becomes vital for radars that operate at the C or X band. Correspondingly, the study setup includes a C-band radar that substantially overlaps with the S-band radar. Based on the extended quality-weighting approach, we retrieve, for each of the two ground radars, a time series of calibration bias estimates from suitable SR overpasses. As a result of applying these estimates to correct the ground radar observations, the consistency between the ground radars in the region of overlap increased substantially. Furthermore, we investigated if the bias estimates can be interpolated in time, so that ground radar observations can be corrected even in the absence of prompt SR overpasses. We found that a moving average approach was most suitable for that purpose, although limited by the absence of explicit records of radar maintenance operations. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 863 KW - Weather KW - Band KW - Reflectivity KW - Algorithm KW - Uncertainties KW - Methodology KW - Kwajalein Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-459630 SN - 1866-8372 IS - 863 ER - TY - JOUR A1 - Crisologo, Irene A1 - Heistermann, Maik T1 - Using ground radar overlaps to verify the retrieval of calibration bias estimates from spaceborne platforms JF - Atmospheric Measurement Techniques N2 - Many institutions struggle to tap into the potential of their large archives of radar reflectivity: these data are often affected by miscalibration, yet the bias is typically unknown and temporally volatile. Still, relative calibration techniques can be used to correct the measurements a posteriori. For that purpose, the usage of spaceborne reflectivity observations from the Tropical Rainfall Measuring Mission (TRMM) and Global Precipitation Measurement (GPM) platforms has become increasingly popular: the calibration bias of a ground radar (GR) is estimated from its average reflectivity difference to the spaceborne radar (SR). Recently, Crisologo et al. (2018) introduced a formal procedure to enhance the reliability of such estimates: each match between SR and GR observations is assigned a quality index, and the calibration bias is inferred as a quality-weighted average of the differences between SR and GR. The relevance of quality was exemplified for the Subic S-band radar in the Philippines, which is greatly affected by partial beam blockage. The present study extends the concept of quality-weighted averaging by accounting for path-integrated attenuation (PIA) in addition to beam blockage. This extension becomes vital for radars that operate at the C or X band. Correspondingly, the study setup includes a C-band radar that substantially overlaps with the S-band radar. Based on the extended quality-weighting approach, we retrieve, for each of the two ground radars, a time series of calibration bias estimates from suitable SR overpasses. As a result of applying these estimates to correct the ground radar observations, the consistency between the ground radars in the region of overlap increased substantially. Furthermore, we investigated if the bias estimates can be interpolated in time, so that ground radar observations can be corrected even in the absence of prompt SR overpasses. We found that a moving average approach was most suitable for that purpose, although limited by the absence of explicit records of radar maintenance operations. KW - Weather KW - Band KW - Reflectivity KW - Algorithm KW - Uncertainties KW - Methodology KW - Kwajalein Y1 - 2020 U6 - https://doi.org/10.5194/amt-13-645-2020 SN - 1867-1381 SN - 1867-8548 VL - 13 IS - 2 SP - 645 EP - 659 PB - Copernicus Publications CY - Göttingen ER - TY - THES A1 - Schuck, Bernhard T1 - Geomechanical and petrological characterisation of exposed slip zones, Alpine Fault, New Zealand T1 - Geomechanische und petrologische Charakterisierung aufgeschlossener Gleithorizonte, Alpine Fault, Neuseeland N2 - The Alpine Fault is a large, plate-bounding, strike-slip fault extending along the north-western edge of the Southern Alps, South Island, New Zealand. It regularly accommodates large (MW > 8) earthquakes and has a high statistical probability of failure in the near future, i.e., is late in its seismic cycle. This pending earthquake and associated co-seismic landslides are expected to cause severe infrastructural damage that would affect thousands of people, so it presents a substantial geohazard. The interdisciplinary study presented here aims to characterise the fault zone’s 4D (space and time) architecture, because this provides information about its rheological properties that will enable better assessment of the hazard the fault poses. The studies undertaken include field investigations of principal slip zone fault gouges exposed along strike of the fault, and subsequent laboratory analyses of these outcrop and additional borehole samples. These observations have provided new information on (I) characteristic microstructures down to the nanoscale that indicate which deformation mechanisms operated within the rocks, (II) mineralogical information that constrains the fault’s geomechanical behaviour and (III) geochemical compositional information that allows the influence of fluid- related alteration processes on material properties to be unraveled. Results show that along-strike variations of fault rock properties such as microstructures and mineralogical composition are minor and / or do not substantially influence fault zone architecture. They furthermore provide evidence that the architecture of the fault zone, particularly its fault core, is more complex than previously considered, and also more complex than expected for this sort of mature fault cutting quartzofeldspathic rocks. In particular our results strongly suggest that the fault has more than one principal slip zone, and that these form an anastomosing network extending into the basement below the cover of Quaternary sediments. The observations detailed in this thesis highlight that two major processes, (I) cataclasis and (II) authigenic mineral formation, are the major controls on the rheology of the Alpine Fault. The velocity-weakening behaviour of its fault gouge is favoured by abundant nanoparticles promoting powder lubrication and grain rolling rather than frictional sliding. Wall-rock fragmentation is accompanied by co-seismic, fluid-assisted dilatancy that is recorded by calcite cementation. This mineralisation, along with authigenic formation of phyllosilicates, quickly alters the petrophysical fault zone properties after each rupture, restoring fault competency. Dense networks of anastomosing and mutually cross-cutting calcite veins and intensively reworked gouge matrix demonstrate that strain repeatedly localised within the narrow fault gouge. Abundantly undeformed euhedral chlorite crystallites and calcite veins cross-cutting both fault gouge and gravels that overlie basement on the fault’s footwall provide evidence that the processes of authigenic phyllosilicate growth, fluid-assisted dilatancy and associated fault healing are processes active particularly close to the Earth’s surface in this fault zone. Exposed Alpine Fault rocks are subject to intense weathering as direct consequence of abundant orogenic rainfall associated with the fault’s location at the base of the Southern Alps. Furthermore, fault rock rheology is substantially affected by shallow-depth conditions such as the juxtaposition of competent hanging wall fault rocks on poorly consolidated footwall sediments. This means microstructural, mineralogical and geochemical properties of the exposed fault rocks may differ substantially from those at deeper levels, and thus are not characteristic of the majority of the fault rocks’ history. Examples are (I) frictionally weak smectites found within the fault gouges being artefacts formed at temperature conditions, and imparting petrophysical properties that are not typical for most of fault rocks of the Alpine Fault, (II) grain-scale dissolution resulting from subaerial weathering rather than deformation by pressure-solution processes and (III) fault gouge geometries being more complex than expected for deeper counterparts. The methodological approaches deployed in analyses of this, and other fault zones, and the major results of this study are finally discussed in order to contextualize slip zone investigations of fault zones and landslides. Like faults, landslides are major geohazards, which highlights the importance of characterising their geomechanical properties. Similarities between faults, especially those exposed to subaerial processes, and landslides, include mineralogical composition and geomechanical behaviour. Together, this ensures failure occurs predominantly by cataclastic processes, although aseismic creep promoted by weak phyllosilicates is not uncommon. Consequently, the multidisciplinary approach commonly used to investigate fault zones may contribute to increase the understanding of landslide faulting processes and the assessment of their hazard potential. N2 - Die Alpine Fault ist eine große Plattengrenze mit lateralem Versatz, die sich entlang des nordwestlichen Fußes der Südalpen, Südinsel Neuseeland, erstreckt. Regelmäßig ereignen sich große (MW > 8) Erdbeben und gegenwärtig befindet sich die Störung am Ende ihres Erdbebenzyklus, so dass ein baldiges Beben sehr wahrscheinlich ist. Die Alpine Fault stellt eine bedeutende Naturgefahr dar und so wird davon ausgegangen, dass tausende Menschen von dem anstehenden Erdbeben, ko-seismischen Hangrutschungen und den damit einhergehenden großen Schäden an der Infrastruktur betroffen sein werden. Daher zielt die hier vorgestellte interdisziplinäre Studie darauf ab, den Aufbau der Störungszone in 4D (räumlich und zeitlich) zu charakterisieren, weil dies Aufschluss über ihre rheologischen Eigenschaften liefert und damit einen Beitrag zur Einschätzung der von der Störung ausgehenden Gefahr leisten wird. Die durchgeführten Arbeiten umfassen Felduntersuchungen der entlang der Störung aufge- schlossenen Hauptscherzone und sich daran anschließende Laboruntersuchungen dieser Auf- schluss- und zusätzlicher Bohrlochproben. Diese geben Aufschluss über (I) charakteristis- che Mikrostrukturen bis in den Nanometerbereich, was erlaubt Deformationsmechanismen abzuleiten, (II) die Mineralogie und ihren Einfluss auf das geomechanische Verhalten und (III) die geochemische Zusammensetzung, die es ermöglicht, den Einfluss fluid-bezogener Alterationsprozesse auf Materialeigenschaften besser zu verstehen. Die Ergebnisse zeigen, dass Variationen der Eigenschaften der Störungsgesteine, wie Mikrostrukturen und mineralogische Zusammensetzung, entlang der Störung nur untergeord- net auftreten und den Aufbau der Störungszone nicht oder nur unwesentlich beeinflussen. Darüber hinaus zeigen sie, dass der Aufbau der Störungszone, vor allem ihres Kerns, komplexer ist als bisher angenommen. Dies ist unerwartet für eine Störung in quartz- und feldspatreichem Gestein dieses Alters. Diese Sicht wird von Ergebnissen gestützt, die nahelegen, dass die Störung mehr als eine Hauptscherzone hat und dass diese ein anastomisierendes Netzwerk bilden, das sich bis in das Festgestein unterhalb der Deckschicht aus quartären Sedimenten erstreckt. Die Beobachtungen dieser Arbeit zeigen, dass zwei Prozesse, (I) Kataklase und (II) au- thigenes Mineralwachstum, den größten Einfluss auf die Rheologie der Alpine Fault haben. Das “velocity-weakening”-Verhalten der Hauptscherzonen und ihres Gesteinsmehls wird durch die große Anzahl von Nanopartikeln begünstigt, die das Rollen der Partikel zu Ungunsten von Gleitreibungsrutschen fördern. Die Zerstückelung des Umgebungsgesteins geht mit ko- seismischer, fluid-unterstützter Dilatanz einher, die die anschließende Zementierung durch Kalzit begünstigt. Diese, in Kombination mit authigenen Schichtsilikaten, stellt die petro- physikalischen Eigenschaften der Störungszone nach jedem Erdbeben schnell wieder her. Dichte Netzwerke anastomisierender und sich gegenseitig durchschlagender Kalzitadern und umfassend aufgearbeitetes Gesteinsmehl belegen, dass Verformung wiederholt in den dünnen Hauptscherbahnen lokalisiert wurde. Kalzitadern durschlagen sowohl das Gesteinsmehl der Hauptscherbahnen als auch das Geröll, das die oberflächennahe Sedimentabdeckung des Festgesteins im Liegenden darstellt. Dies und allgegenwärtige, undeformierte, euhedrale Chlorit-Kristalle belegen, dass authigenes Schichtsilikatwachstum, fluid-unterstütze Dilatanz und das damit einhergehende Heilen der Störung Prozesse sind, die auch nahe der Erdoberfläche wirken. Freigelegte Gesteine der Alpine Fault sind intensiver Verwitterung als direkter Folge des reichlich vorhandenen Steigungsregens, der sich aus der Lage der Störung am Fuß der Südalpen ergibt, ausgesetzt. Darüber hinaus wird die Rheologie der Störungsgesteine erheblich durch oberflächennahen Randbedingungen wie die Gegenüberstellung kompetenter Störungsgesteine des Hangenden mit wenig-konsolidierten Sedimenten des Liegenden beeinflusst. Dies hat zur Folge, dass sich mikrostrukturelle, mineralogische und geochemische Eigenschaften der freigelegten Störungsgesteine erheblich von denen in größeren Tiefen unterscheiden können und folglich nicht charakteristisch für den Großteil der Deformationsgeschichte sind. Beispiele hierfür sind (I) Smektitphasen in den Hauptscherzonen, die einen niedrigen Reibungskoeffizien- ten aufweisen, allerdings Artefakte von für die Mehrheit der Gesteine dieser Störung atypischer Temperaturen und petrophysikalischer Eigenschaften sind, (II) angelöste Minerale als Ergebnis oberflächennaher Verwitterung und nicht von Drucklösung und (III) ein interner Aufbau des Gesteinsmehls der Hauptscherbahnen, der komplexerer ist, als dies für das Äquivalent in größerer Tiefe zu erwarten wäre. Schließlich werden die Ergebnisse dieser Arbeit gemeinsam mit den Hauptbefunden und methodischen Ansätzen anderer Studien zu Störungszonen diskutiert und in Kontext zu Analysen von Scherzonen in Störungen und Hangrutschungen gestellt. Hangrutschungen sind, wie Störungen, bedeutende Naturgefahren, was die Notwendigkeit, ihre geomechanischen Eigenschaften zu charakterisieren, herausstreicht. Störungen, vor allem jene, die Ober- flächenprozessen ausgesetzt sind, und Hangrutschungen teilen viele Gemeinsamkeiten wie mineralogische Zusammensetzung und geomechanisches Verhalten, was vor allem zu Versagen mittels kataklastischer Mechanismen führt; allerdings ist aseismisches Kriechen, befördert durch Schichtsilikate mit niedrigem Reibungskoeffizienten, nicht ungewöhnlich. Folglich könnte der multidisziplinäre Ansatz, der in der Regel zur Untersuchung von Störungszonen herangezogen wird, dazu beitragen das Verständnis von Hangrutschungen zu verbessern und ihr Gefährdungspotential abzuschätzen. KW - Alpine Fault KW - fluid rock interaction KW - microstructures KW - fault healing KW - authigenic mineral formation KW - brittle deformation KW - fault zone architecture KW - strain localization KW - landslides KW - faults KW - mineral composition KW - deformation mechanisms KW - Alpine Fault KW - Fluid-Gesteins-Wechselwirkung KW - Mikrostrukturen KW - Fault Healing KW - authigene Mineralbildung KW - spröde Deformation KW - Störungszonenarchitektur KW - Lokalisierung von Verformung KW - Erdrutsche KW - Verwerfungen KW - Mineralzusammensetzung KW - Deformationsmechanismen Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-446129 ER - TY - THES A1 - Purinton, Benjamin T1 - Remote sensing applications to earth surface processes in the Eastern Central Andes T1 - Fernerkundungsanwendungen für Erdoberflächenprozesse in den östlichen Zentralanden N2 - Geomorphology seeks to characterize the forms, rates, and magnitudes of sediment and water transport that sculpt landscapes. This is generally referred to as earth surface processes, which incorporates the influence of biologic (e.g., vegetation), climatic (e.g., rainfall), and tectonic (e.g., mountain uplift) factors in dictating the transport of water and eroded material. In mountains, high relief and steep slopes combine with strong gradients in rainfall and vegetation to create dynamic expressions of earth surface processes. This same rugged topography presents challenges in data collection and process measurement, where traditional techniques involving detailed observations or physical sampling are difficult to apply at the scale of entire catchments. Herein lies the utility of remote sensing. Remote sensing is defined as any measurement that does not disturb the natural environment, typically via acquisition of images in the visible- to radio-wavelength range of the electromagnetic spectrum. Remote sensing is an especially attractive option for measuring earth surface processes, because large areal measurements can be acquired at much lower cost and effort than traditional methods. These measurements cover not only topographic form, but also climatic and environmental metrics, which are all intertwined in the study of earth surface processes. This dissertation uses remote sensing data ranging from handheld camera-based photo surveying to spaceborne satellite observations to measure the expressions, rates, and magnitudes of earth surface processes in high-mountain catchments of the Eastern Central Andes in Northwest Argentina. This work probes the limits and caveats of remote sensing data and techniques applied to geomorphic research questions, and presents important progress at this disciplinary intersection. N2 - Die Geomorphologie versucht die Art, Geschwindigkeit und Ausmaße des Sediment- und Wassertransports zu charakterisieren welche zur Formung der Landschaften beitragen. Diese werden im Allgemeinen als Erdoberflächenprozesse bezeichnet, welche den Einfluss biologischer (z.B. Vegetation), klimatischer (z.B. Niederschlag) und tektonischer (z.B. Gebirgshebung) Faktoren auf den Transport von Wasser und das erodierte Material beschreiben. Im Hochgebirge entsteht eine dynamische Wechselwirkung zwischen hohen Reliefs und steilen Hängen und infolge dessen starke Regen- und Vegetationsgradienten. Die gleiche raue Topographie stellt wiederum eine Herausforderung bei der Datenerfassung und Prozessmessung dar, da hier herkömmliche Techniken zur detaillierten Beobachtung oder physikalischen Probenahmen im Maßstab ganzer Einzugsgebiete an ihre Grenzen stoßen. Hier zeigt sich der Nutzen der Fernerkundung. Fernerkundung ist definiert als Messung, welche die natürliche Umgebung nicht stört, typischerweise durch Aufnahme von Bildern im sichtbaren bis Radio-Wellenlängenbereich des elektromagnetischen Spektrums. Fernerkundung ist eine besonders vorteilhafte Option für die Messung von Erdoberflächenprozessen, da großflächige Messungen mit wesentlich geringerem Aufwand als bei herkömmlichen Methoden durchgeführt werden können. Diese Messungen ermöglichen nicht nur das Erfassen der topografischen Form, sondern auch das der Klima- und Umwelteinflüsse, die wiederum bei der Untersuchung von Erdoberflächenprozessen miteinander verknüpft sind. In dieser Dissertation werden Fernerkundungsdaten verwendet, die von kamerabasierten Handaufnahmen bis zu weltraumgestützten Satellitenbeobachtungen reichen, um die Auswirkungen, Geschwindigkeiten und das Ausmaß von Erdoberflächenprozessen in hochgebirgigen Einzugsgebieten der östlichen Zentralanden im Nordwesten Argentiniens zu messen. Diese Arbeit untersucht die Möglichkeiten und Grenzen von Fernerkundungsdaten und -techniken, die auf geomorphologische Forschungsfragen angewendet werden und präsentiert wichtige Fortschritte an diesem disziplinären Schnittpunkt. KW - Fernerkundung KW - remote sensing KW - Geomorphologie KW - geomorphology KW - Anden KW - Andes Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-445926 ER -