TY  - JOUR
A1  - Klappenbach, Käthe
A1  - Altenberger, Uwe
T1  - "Mit besseren Steinen zu besetzen" : 100 Jahre Neugestaltung des Grottensaales, Neues Palais im Park Sanssouci
Y1  - 1997
SN  - 0933-0593
ER  - 
TY  - JOUR
A1  - Masson, Torsten
A1  - Bamberg, Sebastian
A1  - Stricker, Michael
A1  - Heidenreich, Anna
T1  - "We can help ourselves": does community resilience buffer against the negative impact of flooding on mental health?
JF  - Natural hazards and earth system sciences
N2  - Empirical evidence of the relationship between social support and post-disaster mental health provides support for a general beneficial effect of social support (main-effect model; Wheaton, 1985). From a theoretical perspective, a buffering effect of social support on the negative relationship between disaster-related stress and mental health also seems plausible (stress-buffering model; Wheaton, 1985). Previous studies, however, (a) have paid less attention to the buffering effect of social support and (b) have mainly relied on interpersonal support (but not collective-level support such as community resilience) when investigating this issue. This previous work might have underestimated the effect of support on post-disaster mental health. Building on a sample of residents in Germany recently affected by flooding (N = 118), we show that community resilience to flooding (but not general interpersonal social support) buffered against the negative effects of flooding on post-disaster mental health. The results support the stress-buffering model and call for a more detailed look at the relationship between support and resilience and post-disaster adjustment, including collective-level variables.
Y1  - 2019
U6  - https://doi.org/10.5194/nhess-19-2371-2019
SN  - 1561-8633
SN  - 1684-9981
VL  - 19
IS  - 11
SP  - 2371
EP  - 2384
PB  - Copernicus
CY  - Göttingen
ER  - 
TY  - JOUR
A1  - Tofelde, Stefanie
A1  - Schildgen, Taylor F.
A1  - Savi, Sara
A1  - Pingel, Heiko
A1  - Wickert, Andrew D.
A1  - Bookhagen, Bodo
A1  - Wittmann, Hella
A1  - Alonso, Ricardo N.
A1  - Cottle, John
A1  - Strecker, Manfred
T1  - 100 kyr fluvial cut-and-fill terrace cycles since the Middle Pleistocene in the southern Central Andes, NW Argentina
JF  - Earth & planetary science letters
N2  - Fluvial fill terraces in intermontane basins are valuable geomorphic archives that can record tectonically and/or climatically driven changes of the Earth-surface process system. However, often the preservation of fill terrace sequences is incomplete and/or they may form far away from their source areas, complicating the identification of causal links between forcing mechanisms and landscape response, especially over multi-millennial timescales. The intermontane Toro Basin in the southern Central Andes exhibits at least five generations of fluvial terraces that have been sculpted into several-hundred-meter-thick Quaternary valley-fill conglomerates. New surface-exposure dating using nine cosmogenic Be-10 depth profiles reveals the successive abandonment of these terraces with a 100 kyr cyclicity between 75 +/- 7 and 487 +/- 34 ka. Depositional ages of the conglomerates, determined by four Al-26/Be-10 burial samples and U-Pb zircon ages of three intercalated volcanic ash beds, range from 18 +/- 141 to 936 +/- 170 ka, indicating that there were multiple cut-and-fill episodes. Although the initial onset of aggradation at similar to 1 Ma and the overall net incision since ca. 500 ka can be linked to tectonic processes at the narrow basin outlet, the superimposed 100 kyr cycles of aggradation and incision are best explained by eccentricity-driven climate change. Within these cycles, the onset of river incision can be correlated with global cold periods and enhanced humid phases recorded in paleoclimate archives on the adjacent Bolivian Altiplano, whereas deposition occurred mainly during more arid phases on the Altiplano and global interglacial periods. We suggest that enhanced runoff during global cold phases - due to increased regional precipitation rates, reduced evapotranspiration, or both - resulted in an increased sediment-transport capacity in the Toro Basin, which outweighed any possible increases in upstream sediment supply and thus triggered incision. Compared with two nearby basins that record precessional (21-kyr) and long-eccentricity (400-kyr) forcing within sedimentary and geomorphic archives, the recorded cyclicity scales with the square of the drainage basin length. (C) 2017 Elsevier B.V. All rights reserved.
KW  - Be-10 depth-profiles
KW  - surface inflation
KW  - aggradation-incision cycles
KW  - glacial-interglacial cycles
KW  - landscape response to climate change
KW  - Eastern Cordillera
Y1  - 2017
U6  - https://doi.org/10.1016/j.epsl.2017.06.001
SN  - 0012-821X
SN  - 1385-013X
VL  - 473
SP  - 141
EP  - 153
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Calo, Camilla
A1  - Henne, Paul D.
A1  - Eugster, Patricia
A1  - van Leeuwen, Jacqueline
A1  - Gilli, Adrian
A1  - Hamann, Yvonne
A1  - La Mantia, Tommaso
A1  - Pasta, Salvatore
A1  - Vescovi, Elisa
A1  - Tinner, Willy
T1  - 1200 years of decadal-scale variability of mediterranean vegetation and climate at Pantelleria Island, Italy
JF  - The Holocene : an interdisciplinary journal focusing on recent environmental change
N2  - A new sedimentary sequence from Lago di Venere on Pantelleria Island, located in the Strait of Sicily between Tunisia and Sicily was recovered. The lake is located in the coastal infra-Mediterranean vegetation belt at 2 m a.s.l. Pollen, charcoal and sedimentological analyses are used to explore linkages among vegetation, fire and climate at a decadal scale over the past 1200 years. A dry period from ad 800 to 1000 that corresponds to the Medieval Warm Period' (WMP) is inferred from sedimentological analysis. The high content of carbonate recorded in this period suggests a dry phase, when the ratio of evaporation/precipitation was high. During this period the island was dominated by thermophilous and drought-tolerant taxa, such as Quercus ilex, Olea, Pistacia and Juniperus. A marked shift in the sediment properties is recorded at ad 1000, when carbonate content became very low suggesting wetter conditions until ad 1850-1900. Broadly, this period coincides with the Little Ice Age' (LIA), which was characterized by wetter and colder conditions in Europe. During this time rather mesic conifers (i.e. Pinus pinaster), shrubs and herbs (e.g. Erica arborea and Selaginella denticulata) expanded, whereas more drought-adapted species (e.g. Q. ilex) declined. Charcoal data suggest enhanced fire activity during the LIA probably as a consequence of anthropogenic burning and/or more flammable fuel (e.g. resinous Pinus biomass). The last century was characterized by a shift to high carbonate content, indicating a change towards drier conditions, and re-expansion of Q. ilex and Olea. The post-LIA warming is in agreement with historical documents and meteorological time series. Vegetation dynamics were co-determined by agricultural activities on the island. Anthropogenic indicators (e.g. Cerealia-type, Sporormiella) reveal the importance of crops and grazing on the island. Our pollen data suggest that extensive logging caused the local extinction of deciduous Quercus pubescens around ad1750.
KW  - central Mediterranean
KW  - fire history
KW  - "Little Ice Age' (LIA)
KW  - "Medieval Warm Period' (MWP)
KW  - Pinus pinaster
KW  - Quercus ilex
KW  - Quercus pubescens
KW  - vegetation history
Y1  - 2013
U6  - https://doi.org/10.1177/0959683613493935
SN  - 0959-6836
SN  - 1477-0911
VL  - 23
IS  - 10
SP  - 1477
EP  - 1486
PB  - Sage Publ.
CY  - London
ER  - 
TY  - GEN
A1  - Calò, Camilla
A1  - Henne, Paul D.
A1  - Eugster, Patricia
A1  - Leeuwen, Jacqueline van
A1  - Gilli, Adrian
A1  - Hamann, Yvonne
A1  - La Mantia, Tommaso
A1  - Pasta, Salvatore
A1  - Vescovi, Elisa
A1  - Tinner, Willy
T1  - 1200 years of decadal-scale variability of Mediterranean vegetation and climate at Pantelleria Island, Italy
N2  - A new sedimentary sequence from Lago di Venere on Pantelleria Island, located in the Strait of Sicily between Tunisia and Sicily was recovered. The lake is located in the coastal infra-Mediterranean vegetation belt at 2 m a.s.l. Pollen, charcoal and sedimentological analyses are used to explore linkages among vegetation, fire and climate at a decadal scale over the past 1200 years. A dry period from ad 800 to 1000 that corresponds to the Medieval Warm Period' (WMP) is inferred from sedimentological analysis. The high content of carbonate recorded in this period suggests a dry phase, when the ratio of evaporation/precipitation was high. During this period the island was dominated by thermophilous and drought-tolerant taxa, such as Quercus ilex, Olea, Pistacia and Juniperus. A marked shift in the sediment properties is recorded at ad 1000, when carbonate content became very low suggesting wetter conditions until ad 1850-1900. Broadly, this period coincides with the Little Ice Age' (LIA), which was characterized by wetter and colder conditions in Europe. During this time rather mesic conifers (i.e. Pinus pinaster), shrubs and herbs (e.g. Erica arborea and Selaginella denticulata) expanded, whereas more drought-adapted species (e.g. Q. ilex) declined. Charcoal data suggest enhanced fire activity during the LIA probably as a consequence of anthropogenic burning and/or more flammable fuel (e.g. resinous Pinus biomass). The last century was characterized by a shift to high carbonate content, indicating a change towards drier conditions, and re-expansion of Q. ilex and Olea. The post-LIA warming is in agreement with historical documents and meteorological time series. Vegetation dynamics were co-determined by agricultural activities on the island. Anthropogenic indicators (e.g. Cerealia-type, Sporormiella) reveal the importance of crops and grazing on the island. Our pollen data suggest that extensive logging caused the local extinction of deciduous Quercus pubescens around ad1750.
T3  - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 411 
KW  - central Mediterranean
KW  - fire history
KW  - "Little Ice Age' (LIA)
KW  - "Medieval Warm Period' (MWP)
KW  - Pinus pinaster
KW  - Quercus ilex
KW  - Quercus pubescens
KW  - vegetation history
Y1  - 2017
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-403240
ER  - 
TY  - JOUR
A1  - Guillemoteau, Julien
A1  - Lück, Erika
A1  - Tronicke, Jens
T1  - 1D inversion of direct current data acquired with a rolling electrode system
JF  - Journal of applied geophysics
N2  - Direct current systems employing a kinematic surveying strategy allow to analyze the electrical resistivity of the subsurface for large areas (i.e., several hectares). Typical applications are found in precision agriculture, archaeological prospecting and soil sciences. With the typical survey setting, the collected data sets are often characterized by a rather high level of noise and a rather coarse lateral sampling compared to data acquired with fixed electrodes. We therefore present an efficient one-dimensional inversion approach in which we put special attention on modeling the effects of noise. We apply this method to data recorded with a five-offset equatorial dipole-dipole system employing rolling electrodes. By performing several synthetic tests with realistic noise levels, we found that the considered five-configuration soundings allow for a reliable imaging of two-layer cases in the uppermost two meters of the subsurface, where the subsurface can be assumed to follow a horizontally layered geometry within 3 m around the system. By analyzing the corresponding sensitivity functions, we also show that the equatorial dipole-dipole array is relatively well suited for a 1D inversion approach compared to standard in-line electrode arrays. To illustrate this aspect, we show that our method can provide results similar to those obtained with a 2D Wenner imaging procedure for data recorded across a well-constrained 2D target. We finally apply our method to a large five-offset data set acquired in an agricultural study. The final pseudo-3D model of electrical resistivity is in accordance with borehole data available for the surveyed area. Our results demonstrate the applicability and the versatility of the presented inversion approach for large-scale data sets as they are typically collected with such rolling electrode systems. (C) 2017 Elsevier B.V. All rights reserved.
Y1  - 2017
U6  - https://doi.org/10.1016/j.jappgeo.2017.09.010
SN  - 0926-9851
SN  - 1879-1859
VL  - 146
SP  - 167
EP  - 177
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Guillemoteau, Julien
A1  - Simon, Francois-Xavier
A1  - Lück, Erika
A1  - Tronicke, Jens
T1  - 1D sequential inversion of portable multi-configuration electromagnetic induction data
JF  - Near surface geophysics
N2  - We present an algorithm that performs sequentially one-dimensional inversion of subsurface magnetic permeability and electrical conductivity by using multi-configuration electromagnetic induction sensor data. The presented method is based on the conversion of the in-phase and out-of-phase data into effective magnetic permeability and electrical conductivity of the equivalent homogeneous half-space. In the case of small-offset systems, such as portable electromagnetic induction sensors, for which in-phase and out-of-phase data are moderately coupled, the effective half-space magnetic permeability and electrical conductivity can be inverted sequentially within an iterative scheme. We test and evaluate the proposed inversion strategy using synthetic and field examples. First, we apply it to synthetic data for some highly magnetic environments. Then, the method is tested on real field data acquired in a basaltic environment to image a formation of archaeological interest. These examples demonstrate that a joint interpretation of in-phase and out-of-phase data leads to a better characterisation of the subsurface in magnetic environments such as volcanic areas.
Y1  - 2016
U6  - https://doi.org/10.3997/1873-0604.2016029
SN  - 1569-4445
SN  - 1873-0604
VL  - 14
SP  - 423
EP  - 432
PB  - Wiley-VCH
CY  - Houten
ER  - 
TY  - THES
A1  - Lontsi, Agostiny Marrios
T1  - 1D shallow sedimentary subsurface imaging using ambient noise and active seismic data
T1  - 1D Bildgebung oberflächennaher Sedimente mit Hilfe von Daten der allgemeinen, seismischen Bodenunruhe und Daten der aktiven Seismik
N2  - The Earth’s shallow subsurface with sedimentary cover acts as a waveguide to any incoming wavefield. Within the framework of my thesis, I focused on the characterization of this shallow subsurface within tens to few hundreds of meters of sediment cover. I imaged the seismic 1D shear wave velocity (and possibly the 1D compressional wave velocity). This information is not only required for any seismic risk assessment, geotechnical engineering or microzonation activities, but also for exploration and global seismology where site effects are often neglected in seismic waveform modeling. 
First, the conventional frequency-wavenumber (f - k) technique is used to derive the dispersion characteristic of the propagating surface waves recorded using distinct arrays of seismometers in 1D and 2D configurations. Further, the cross-correlation technique is applied to seismic array data to estimate the Green’s function between receivers pairs combination assuming one is the source and the other the receiver. With the consideration of a 1D media, the estimated cross-correlation Green’s functions are sorted with interstation distance in a virtual 1D active seismic experiment. The f - k technique is then used to estimate the dispersion curves. This integrated analysis is important for the interpretation of a large bandwidth of the phase velocity dispersion curves and therefore improving the resolution of the estimated 1D Vs profile.
Second, the new theoretical approach based on the Diffuse Field Assumption (DFA) is used for the interpretation of the observed microtremors H/V spectral ratio. The theory is further extended in this research work to include not only the interpretation of the H/V measured at the surface, but also the H/V measured at depths and in marine environments. A modeling and inversion of synthetic H/V spectral ratio curves on simple predefined geological structures shows an almost perfect recovery of the model parameters (mainly Vs and to a lesser extent Vp). These results are obtained after information from a receiver at depth has been considered in the inversion. 
Finally, the Rayleigh wave phase velocity information, estimated from array data, and the H/V(z, f) spectral ratio, estimated from a single station data, are combined and inverted for the velocity profile information. Obtained results indicate an improved depth resolution in comparison to estimations using the phase velocity dispersion curves only. The overall estimated sediment thickness is comparable to estimations obtained by inverting the full micortremor H/V spectral ratio.
N2  - Oberflächennahe Sedimente wirken oft als Verstärker für einfallende seismische Wellenfelder. Im Rahmen meiner Doktorarbeit konzentriere ich mich auf die Eigenschaften des oberflächennahen Untergrundes von einigen zehn bis zu hundert Metern Sedimentabdeckung. Dabei leite ich Tiefenprofile (1D) der seismische Scherwellengeschwindigkeit (Vs) und wenn möglich auch der Kompressionswellengeschwindigkeit (Vp) aus seismischen Daten ab. Diese Informationen sind nicht nur für jede Erdbebenrisikobewertung, Geotechnik- oder Mikrozonierungsaktivität erforderlich, sondern sind auch für die seismische Erkundung und globale Seismologie von Bedeutung, da Standorteffekte in seismischen Wellenformmodellierungen oft vernachlässigt werden.
Zuerst wird die herkömmliche Frequenz-Wellenzahl (f - k) Technik verwendet, um die Dispersionskurven der Phasengeschwindigkeit von Oberflächenwellen abzuleiten. Die zugrundeliegenden Daten stammen von Seismometerarrays in unterschiedlichen 1D- und 2D-Konfigurationen. In einem weiteren Schritt wird die Green’s Funktion zwischen verschiedenen Empfängerpaaren aus den Daten des seismischen Arrays geschätzt. Dabei wird die Kreuzkorrelationstechnik verwendet. In einem virtuellen 1D Experiment der aktiven Seismik werden die abgeleiteten Green’s Funktionen der Interstationsdistanz nach geordnet. Dann wird die f-k Technik verwendet um wiederum Dispersionskurven abzuleiten. Dieser integrierte Ansatz
ermöglicht die Analyse einer grösseren Bandbreite für die Dispersionskurven und daher eine verbesserte Auflösung des 1D Tiefenprofils der Scherwellengeschwindigkeit (Vs).
In einem zweiten Schritt wird ein neuer Ansatz, basierend auf der diffusen Wellenfeldannahme (engl., Diffuse Field Assumption, DFA), zur Interpretation beobachteter horizontal zu vertikalen Spektralamplitudenverhältnissen (H/V-Spektralverhältnisse), die aus allgemeiner Bodenunruhe abgeleited wurden,genutzt. Diese Theorie wurde im Rahmen der vorliegenden Arbeit erweitert, um nicht nur an der Oberfläche gemessene H/V- Spektralverhältnisse interpretieren zu können sondern auch Messungen in der Tiefe (Bohrloch) und in mariner Umgebung (Ozeanboden). Eine Modellierung und Inversion von synthetischen HV- Spektralverhältnissen für vordefinierte, einfache geologische Strukturen zeigt eine nahezu perfekte Identifikation/Rekonstruktion der Modellparameter (im wesentlichen Vs und in geringerem Maße Vp), wenn die zusätzliche Information von HV- Spektralverhältnissen eines Empfängers in der Tiefe
bei der Inversion berücksichtigt wird.
Letztlich wurden (i) Phasengeschwindigkeiten von Rayleighwellen, die aus einem Arraydatensatz
geschätzt wurden, mit (ii) H/V-Spektralverhältnissen einer Einzelstation kombiniert invertiert, um Tiefen-profile seismischer Geschwindigkeiten (Vs, Vp) zu bestimmen. Die Ergebnisse deuten daraufhin, dass sich mit einer kombinierte Inversion seismische Geschwindigkeiten bis in größere Tiefen bestimmen lassen, verglichen mit der Inversion von nur Phasengeschwindigkeiten allein. Die geschätzte Gesamtmächtigkeit von Oberflächensedimenten aufgrund der kombinierten Inversion ist vergleichbar mit der, abgleitet von nur H/V-Spektralverhältnissen.
KW  - active seismic
KW  - passive seismic
KW  - virtual active seismic
KW  - dispersion curves
KW  - inversion
KW  - Vs profiles
KW  - inverse theory
KW  - interferometry
KW  - site effects
KW  - aktive Seismik
KW  - passive Seismik
KW  - virtuelle aktive Seismik
KW  - Dispersionskurven
KW  - Inversion
KW  - Vs Profile
KW  - Inversionstheorie
KW  - Interferometrie
KW  - Standorteffekte
Y1  - 2016
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-103807
ER  - 
TY  - JOUR
A1  - Streich, Rita
A1  - Becken, Michael
A1  - Ritter, Oliver
T1  - 2.5D controlled-source EM modeling with general 3D source geometries
JF  - Geophysics
N2  - Most 2.5D controlled-source electromagnetic (CSEM) modeling algorithms presented to date explicitly consider only sources that are point dipoles oriented parallel or perpendicular to the direction of constant conductivity. This makes simulations of complex source geometries expensive, requiring separate evaluations of many point dipole fields, and thus limits the practical applicability of such schemes for simulating and interpreting field data. We present a novel 2.5D CSEM modeling scheme that overcomes this limitation and permits efficient simulations of sources with general shape and orientation by evaluating fields for the entire source at once. We accommodate general sources by using a secondary field approach, in which primary fields are computed for the general source and a 1D background conductivity model. To carry out the required Fourier transforms between space and wavenumber domain using the same fast cosine and sine transform filters as in conventional algorithms, we split the primary and secondary fields into their symmetric and antisymmetric parts. For complex 3D source geometries, this approach is significantly more efficient than previous 2.5D algorithms. Our finite-difference algorithm also includes novel approaches for divergence correction at low frequencies and EM field interpolation across conductivity discontinuities. We describe the modeling scheme and demonstrate its accuracy and efficiency by comparisons of 2.5D-simulated data with 1D and 3D results.
Y1  - 2011
U6  - https://doi.org/10.1190/GEO2011-0111.1
SN  - 0016-8033
VL  - 76
IS  - 6
SP  - F387
EP  - F393
PB  - Society of Exploration Geophysicists
CY  - Tulsa
ER  - 
TY  - JOUR
A1  - Sudfeldt, Christoph
A1  - Melter, Johannes
A1  - Naacke, Johannes
T1  - 20 Jahre Ramsar-Konvention in Deutschland : Sitzt der Feuchtgebietsschutz auf dem Trockenen?
BT  - Zwanzig Jahre Ramsar-Konvention in Deutschland : Sitzt der Feuchtgebietsschutz auf dem Trockenen?
Y1  - 1996
ER  - 
TY  - JOUR
A1  - Rutschke, Erich
T1  - 25 Jahre Konvention zum Schutz von Feuchtgebieten
BT  - Fünfundzwanzig Jahre Konvention zum Schutz von Feuchtgebieten
Y1  - 1996
ER  - 
TY  - JOUR
A1  - Rutschke, Erich
T1  - 25 Jahre Konvention zum Schutz von Feuchtgebieten : Anmerkungen zur Vertragsstaatenkonferenz der Ramsar- Konvention in Brisbane, Australien, März 1996
BT  - Fünfundzwanzig Jahre Konvention zum Schutz von Feuchtgebieten
Y1  - 1997
ER  - 
TY  - JOUR
A1  - Rutschke, Erich
T1  - 25 Jahre Ramsar-Konvention : zur Situation der "Feuchtgebiete von internationaler Bedeutung" im Land Brandenburg
BT  - Fünfundzwanzig Jahre Ramsar-Konvention
Y1  - 1998
ER  - 
TY  - JOUR
A1  - Rutschke, Erich
T1  - 25 Jahre Ramsar-Konvention zum Schutz von Feuchtgebieten
BT  - Fünfundzwanzig Jahre Ramsar-Konvention zum Schutz von Feuchtgebieten
Y1  - 1996
ER  - 
TY  - JOUR
A1  - Wiederkehr, Michael
A1  - Bousquet, Romain
A1  - Ziemann, Martin Andreas
A1  - Berger, Alfons
A1  - Schmid, Stefan M.
T1  - 3-D assessment of peak-metamorphic conditions by Raman spectroscopy of carbonaceous material an example from the margin of the Lepontine dome (Swiss Central Alps)
JF  - International journal of earth sciences
N2  - This study monitors regional changes in the crystallinity of carbonaceous matter (CM) by applying Micro-Raman spectroscopy to a total of 214 metasediment samples (largely so-called Bundnerschiefer) dominantly metamorphosed under blueschist- to amphibolite-facies conditions. They were collected within the northeastern margin of the Lepontine dome and easterly adjacent areas of the Swiss Central Alps. Three-dimensional mapping of isotemperature contours in map and profile views shows that the isotemperature contours associated with the Miocene Barrow-type Lepontine metamorphic event cut across refolded nappe contacts, both along and across strike within the northeastern margin of the Lepontine dome and adjacent areas. Further to the northeast, the isotemperature contours reflect temperatures reached during the Late Eocene subduction-related blueschist-facies event and/or during subsequent near-isothermal decompression; these contours appear folded by younger, large-scale post-nappe-stacking folds. A substantial jump in the recorded maximum temperatures across the tectonic contact between the frontal Adula nappe complex and surrounding metasediments indicates that this contact accommodated differential tectonic movement of the Adula nappe with respect to the enveloping Bundnerschiefer after maximum temperatures were reached within the northern Adula nappe, i.e. after Late Eocene time.
KW  - HP-metamorphism
KW  - Barrovian metamorphism
KW  - Graphitization
KW  - Metasediments
KW  - Micro-Raman spectroscopy
KW  - Central Alps
Y1  - 2011
U6  - https://doi.org/10.1007/s00531-010-0622-2
SN  - 1437-3254
VL  - 100
IS  - 5
SP  - 1029
EP  - 1063
PB  - Springer
CY  - New York
ER  - 
TY  - GEN
A1  - Gholamrezaie, Ershad
A1  - Scheck-Wenderoth, Magdalena
A1  - Bott, Judith
A1  - Heidbach, Oliver
A1  - Strecker, Manfred
T1  - 3-D crustal density model of the Sea of Marmara
T2  - Postprints der Universität Potsdam Mathematisch-Naturwissenschaftliche Reihe
N2  - Abstract. The Sea of Marmara, in northwestern Turkey, is a transition zone where the dextral North Anatolian Fault zone (NAFZ) propagates westward from the Anatolian Plate to the Aegean Sea Plate. The area is of interest in the context of seismic hazard of Istanbul, a metropolitan area with about 15 million inhabitants. Geophysical observations indicate that the crust is heterogeneous beneath the Marmara basin, but a detailed characterization of the crustal heterogeneities is still missing. To assess if and how crustal heterogeneities are related to the NAFZ segmentation below the Sea of Marmara, we develop new crustal-scale 3-D density models which integrate geological and seismological data and that are additionally constrained by 3-D gravity modeling. For the latter, we use two different gravity datasets including global satellite data and local marine gravity observation. Considering the two different datasets and the general non-uniqueness in potential field modeling, we suggest three possible “end-member” solutions that are all consistent with the observed gravity field and illustrate the spectrum of possible solutions. These models indicate that the observed gravitational anomalies originate from significant density heterogeneities within the crust. Two layers of sediments, one syn-kinematic and one pre-kinematic with respect to the Sea of Marmara formation are underlain by a heterogeneous crystalline crust. A felsic upper crystalline crust (average density of 2720 kgm⁻³) and an intermediate to mafic lower crystalline crust (average density of 2890 kgm⁻³) appear to be cross-cut by two large, dome-shaped mafic highdensity bodies (density of 2890 to 3150 kgm⁻³) of considerable thickness above a rather uniform lithospheric mantle (3300 kgm⁻³). The spatial correlation between two major bends of the main Marmara fault and the location of the highdensity bodies suggests that the distribution of lithological heterogeneities within the crust controls the rheological behavior along the NAFZ and, consequently, maybe influences fault segmentation and thus the seismic hazard assessment in the region.
T3  - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 737 
KW  - North Anatolian Fault
KW  - Shear Zone
KW  - Northwestern Anatolia
KW  - Geomechanical Model
KW  - Tectonic Evolution
KW  - Slip Distribution
KW  - Middle Strand
KW  - Pull-Apart
KW  - Long-Term
KW  - NW Turkey
Y1  - 2019
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-434661
SN  - 1866-8372
IS  - 737
SP  - 785
EP  - 807
ER  - 
TY  - JOUR
A1  - Gholamrezaie, Ershad
A1  - Scheck-Wenderoth, Magdalena
A1  - Bott, Judith
A1  - Heidbach, Oliver
A1  - Strecker, Manfred
T1  - 3-D crustal density model of the Sea of Marmara
JF  - Solid Earth
N2  - Abstract. The Sea of Marmara, in northwestern Turkey, is a transition zone where the dextral North Anatolian Fault zone (NAFZ) propagates westward from the Anatolian Plate to the Aegean Sea Plate. The area is of interest in the context of seismic hazard of Istanbul, a metropolitan area with about 15 million inhabitants. Geophysical observations indicate that the crust is heterogeneous beneath the Marmara basin, but a detailed characterization of the crustal heterogeneities is still missing. To assess if and how crustal heterogeneities are related to the NAFZ segmentation below the Sea of Marmara, we develop new crustal-scale 3-D density models which integrate geological and seismological data and that are additionally constrained by 3-D gravity modeling. For the latter, we use two different gravity datasets including global satellite data and local marine gravity observation. Considering the two different datasets and the general non-uniqueness in potential field modeling, we suggest three possible “end-member” solutions that are all consistent with the observed gravity field and illustrate the spectrum of possible solutions. These models indicate that the observed gravitational anomalies originate from significant density heterogeneities within the crust. Two layers of sediments, one syn-kinematic and one pre-kinematic with respect to the Sea of Marmara formation are underlain by a heterogeneous crystalline crust. A felsic upper crystalline crust (average density of 2720 kgm⁻³) and an intermediate to mafic lower crystalline crust (average density of 2890 kgm⁻³) appear to be cross-cut by two large, dome-shaped mafic highdensity bodies (density of 2890 to 3150 kgm⁻³) of considerable thickness above a rather uniform lithospheric mantle (3300 kgm⁻³). The spatial correlation between two major bends of the main Marmara fault and the location of the highdensity bodies suggests that the distribution of lithological heterogeneities within the crust controls the rheological behavior along the NAFZ and, consequently, maybe influences fault segmentation and thus the seismic hazard assessment in the region.
KW  - North Anatolian Fault
KW  - Shear Zone
KW  - Northwestern Anatolia
KW  - Geomechanical Model
KW  - Tectonic Evolution
KW  - Slip Distribution
KW  - Middle Strand
KW  - Pull-Apart
KW  - Long-Term
KW  - NW Turkey
Y1  - 2019
U6  - https://doi.org/10.5194/se-10-785-2019
SN  - 1869-9510
SN  - 1869-9529
VL  - 10
SP  - 785
EP  - 807
PB  - Copernicus Publ.
CY  - Göttingen
ER  - 
TY  - JOUR
A1  - Reiter, Karsten
A1  - Heidbach, Oliver
T1  - 3-D geomechanical-numerical model of the contemporary crustal stress state in the Alberta Basin (Canada)
JF  - Solid earth
N2  - In the context of examining the potential usage of safe and sustainable geothermal energy in the Alberta Basin, whether in deep sediments or crystalline rock, the understanding of the in situ stress state is crucial. It is a key challenge to estimate the 3-D stress state at an arbitrarily chosen point in the crust, based on sparsely distributed in situ stress data.
 To address this challenge, we present a large-scale 3-D geomechanical-numerical model (700 km x 1200 km x 80 km) from a large portion of the Alberta Basin, to provide a 3-D continuous quantification of the contemporary stress orientations and stress magnitudes. To calibrate the model, we use a large database of in situ stress orientation (321 S-Hmax) as well as stress magnitude data (981 S-V, 1720 S-hmin and 2 (+11) S-Hmax) from the Alberta Basin. To find the best-fit model, we vary the material properties and primarily the displacement boundary conditions of the model. This study focusses in detail on the statistical calibration procedure, because of the large amount of available data, the diversity of data types, and the importance of the order of data tests.
 The best-fit model provides the total 3-D stress tensor for nearly the whole Alberta Basin, and allows estimation of stress orientation and stress magnitudes in advance of any well. First-order implications for the well design and configuration of enhanced geothermal systems are revealed. Systematic deviations of the modelled stress from the in situ data are found for stress orientations in the Peace River and the Bow Island Arch as well as for leak-off test magnitudes.
Y1  - 2014
U6  - https://doi.org/10.5194/se-5-1123-2014
SN  - 1869-9510
SN  - 1869-9529
VL  - 5
IS  - 2
SP  - 1123
EP  - 1149
PB  - Copernicus
CY  - Göttingen
ER  - 
TY  - JOUR
A1  - Guillemoteau, Julien
A1  - Simon, Francois-Xavier
A1  - Hulin, Guillaume
A1  - Dousteyssier, Bertrand
A1  - Dacko, Marion
A1  - Tronicke, Jens
T1  - 3-D imaging of subsurface magnetic permeability/susceptibility with portable frequency domain electromagnetic sensors for near surface exploration
JF  - Geophysical journal international
N2  - The in-phase response collected by portable loop-loop electromagnetic induction (EMI) sensors operating at low and moderate induction numbers (<= 1) is typically used for sensing the magnetic permeability (or susceptibility) of the subsurface. This is due to the fact that the in-phase response contains a small induction fraction and a preponderant induced magnetization fraction. The magnetization fraction follows the magneto-static equations similarly to the magnetic method but with an active magnetic source. The use of an active source offers the possibility to collect data with several loop-loop configurations, which illuminate the subsurface with different sensitivity patterns. Such multiconfiguration soundings thereby allows the imaging of subsurface magnetic permeability/susceptibility variations through an inversion procedure. This method is not affected by the remnant magnetization and theoretically overcomes the classical depth ambiguity generally encountered with passive geomagnetic data. To invert multiconfiguration in-phase data sets, we propose a novel methodology based on a full-grid 3-D multichannel deconvolution (MCD) procedure. This method allows us to invert large data sets (e.g. consisting of more than a hundred thousand of data points) for a dense voxel-based 3-D model of magnetic susceptibility subject to smoothness constraints. In this study, we first present and discuss synthetic examples of our imaging procedure, which aim at simulating realistic conditions. Finally, we demonstrate the applicability of our method to field data collected across an archaeological site in Auvergne (France) to image the foundations of a Gallo-Roman villa built with basalt rock material. Our synthetic and field data examples demonstrate the potential of the proposed inversion procedure offering new and complementary ways to interpret data sets collected with modern EMI instruments.
KW  - Magnetic properties
KW  - Controlled source electromagnetics (CSEM)
KW  - Electromagnetic theory
KW  - Environmental magnetism
KW  - Inverse theory
Y1  - 2019
U6  - https://doi.org/10.1093/gji/ggz382
SN  - 0956-540X
SN  - 1365-246X
VL  - 219
IS  - 3
SP  - 1773
EP  - 1785
PB  - Oxford Univ. Press
CY  - Oxford
ER  - 
TY  - THES
A1  - Amour, Frédéric
T1  - 3-D modeling of shallow-water carbonate systems : a scale-dependent approach based on quantitative outcrop studies
T1  - 3-D Modellierung von Flachwasser-Karbonat-Sytemen : eine skalenabhängige Herangehensweise basierend auf quantitativen Aufschlussstudien
N2  - The study of outcrop modeling is located at the interface between two fields of expertise, Sedimentology and Computing Geoscience, which respectively investigates and simulates geological heterogeneity observed in the sedimentary record. During the last past years, modeling tools and techniques were constantly improved. In parallel, the study of Phanerozoic carbonate deposits emphasized the common occurrence of a random facies distribution along single depositional domain. Although both fields of expertise are intrinsically linked during outcrop simulation, their respective advances have not been combined in literature to enhance carbonate modeling studies. The present study re-examines the modeling strategy adapted to the simulation of shallow-water carbonate systems, based on a close relationship between field sedimentology and modeling capabilities. In the present study, the evaluation of three commonly used algorithms Truncated Gaussian Simulation (TGSim), Sequential Indicator Simulation (SISim), and Indicator Kriging (IK), were performed for the first time using visual and quantitative comparisons on an ideally suited carbonate outcrop. The results show that the heterogeneity of carbonate rocks cannot be fully simulated using one single algorithm. The operating mode of each algorithm involves capabilities as well as drawbacks that are not capable to match all field observations carried out across the modeling area. Two end members in the spectrum of carbonate depositional settings, a low-angle Jurassic ramp (High Atlas, Morocco) and a Triassic isolated platform (Dolomites, Italy), were investigated to obtain a complete overview of the geological heterogeneity in shallow-water carbonate systems. Field sedimentology and statistical analysis performed on the type, morphology, distribution, and association of carbonate bodies and combined with palaeodepositional reconstructions, emphasize similar results. At the basin scale (x 1 km), facies association, composed of facies recording similar depositional conditions, displays linear and ordered transitions between depositional domains. Contrarily, at the bedding scale (x 0.1 km), individual lithofacies type shows a mosaic-like distribution consisting of an arrangement of spatially independent lithofacies bodies along the depositional profile. The increase of spatial disorder from the basin to bedding scale results from the influence of autocyclic factors on the transport and deposition of carbonate sediments. Scale-dependent types of carbonate heterogeneity are linked with the evaluation of algorithms in order to establish a modeling strategy that considers both the sedimentary characteristics of the outcrop and the modeling capabilities. A surface-based modeling approach was used to model depositional sequences. Facies associations were populated using TGSim to preserve ordered trends between depositional domains. At the lithofacies scale, a fully stochastic approach with SISim was applied to simulate a mosaic-like lithofacies distribution. This new workflow is designed to improve the simulation of carbonate rocks, based on the modeling of each scale of heterogeneity individually. Contrarily to simulation methods applied in literature, the present study considers that the use of one single simulation technique is unlikely to correctly model the natural patterns and variability of carbonate rocks. The implementation of different techniques customized for each level of the stratigraphic hierarchy provides the essential computing flexibility to model carbonate systems. Closer feedback between advances carried out in the field of Sedimentology and Computing Geoscience should be promoted during future outcrop simulations for the enhancement of 3-D geological models.
N2  - Das Modellieren von geologischen Aufschlüssen liegt der Schnittstelle zwischen zwei geo-logischen Teildisziplinen, der Sedimentologie und der geologischen Modellierung. Hierbei werden geologische Heterogenitäten untersucht und simuliert, welche im Aufschluss beobachtet wurden. Während der letzten Jahre haben sich die Werkzeuge und die Technik der Modellierung stetig weiter-entwickelt. Parallel dazu hat die Untersuchung der phanerozoischen Karbonatablagerungen ihren Fokus auf gemeinsamen Vorkommen von zufälligen Faziesverteilungen in beiden Ablagerungs-gebieten. Obwohl beide Teildisziplinen durch die Aufschlussmodellierung eigentlich verbunden sind, wurden ihre jeweiligen Vorteile in der Literatur nicht miteinander verbunden, um so eine Verbesserung ähnlicher Studien zu erreichen. Die vorliegende Studie überprüft erneut die Modellierungsstrategie, angepasst an die Simulation von Flachwasser-Karbonat-Systemen und basierend auf einer engen Beziehung zwischen Sedimentologie und Modellierung. Die vorliegende Arbeit behandelt erstmals die Evaluierung der drei am häufigsten verwendeten Algorithmen „Truncated Gaussian Simulation (TGSim)“, „Sequential Indicator Simulation (SISim)“ und „Indicator Kriging (IK)“, um sie visuell und quantitativ mit dem entsprechenden Aufschluss zu vergleichen. Die Ergebnisse zeigen, dass die Heterogenität von Karbonatgesteinen nicht komplett mit nur einem Algorithmus simuliert werden kann. Die Eigenschaften jedes einzelnen Algorithmus beinhalten Vor- und Nachteile, sodass kein Algorithmus alle Beobachtungen aus dem Aufschluss widerspiegelt. Die zwei Endglieder im Spektrum der Ablagerungsbedingungen von Karbonaten, eine flachwinklige, jurassische Karbonat-Rampe (Hoher Atlas, Marokko) und eine isolierte, triassische Plattform (Dolomiten, Italien), wurden untersucht, um einen kompletten Überblick über die verschiedenen Heterogenitäten in Flachwasser-Karbonat- Systemen zu erhalten. Sedimentologische und statistische Analysen wurden für die verschiedenen Typen, Morphologien, Verteilungen und Assoziationen von Karbonatablagerungen durchgeführt und mit paläogeografischen Rekonstruktionen kombiniert und zeigen ähnliche Ergebnisse. Im Beckenmaßstab zeigen die Faziesassoziationen, bestehend aus Fazieszonen mit ähnlichen Ablagerungsbedingungen, einen linearen und kontinuierlichen Übergang zwischen den einzelnen Ablagerungsbereichen. Im Gegensatz dazu zeigt für einzelne Lithofaziestypen im Maßstab einzelner Schichten eine mosaikartige Verteilung, bestehend aus einer Anordnung räumlich unabhängiger Lithofazieszonen entlang des Ablagerungsprofils. Das Ansteigen der räumlichen Unordnung von der beckenweiten Ablagerung zur Ablagerung einzelner Schichten resultiert aus dem Einfluss autozyklischer Faktoren bei der Ablagerung von Karbonaten. Die Skalenabhängigkeit von Karbonat-Heterogenität ist mit der Auswertung der Algorithmen verknüpft um eine Modellierungsstrategie zu etablieren, welche sowohl die sedimentären Charakteristiken des Aufschlusses als auch die Modellierfähigkeit berücksichtigt. Für die Modellierung der Ablagerungssequenzen wurde ein flächenbasierter Ansatz verwendet. Die Faziesassoziationen wurden durch die Benutzung des TGSim-Algorithmus simuliert, um die regulären Trends zwischen den einzelnen Ablagerungsgebieten zu erhalten. Im Bereich der verschiedenen Lithofazien wurde mit dem SISim-Algorithmus, ein voll stochastischer Ansatz angewendet, um die mosaikartige Verteilung der Lithofazies-Typen zu simulieren. Dieser neue Arbeitsablauf wurde konzipiert, um die Simulierung von Karbonaten auf Basis der einzelnen Heterogenitäten in verschiedenen Größenordnungen zu verbessern. Im Gegensatz zu den in der Literatur angewendeten Simulationsmethoden berücksichtigt diese Studie, dass eine einzelne Modellierungstechnik die natürlichen Ablagerungsmuster und Variabilität von Karbonaten wahrscheinlich nicht korrekt abbildet. Die Einführung verschiedener Techniken, angepasst auf die verschiedenen Ebenen der stratigrafischen Hierarchie, liefert die notwendige Flexibilität um Karbonatsysteme korrekt zu modellieren. Eine enge Verknüpfung zwischen den Fortschritten auf dem Gebieten der Sedimentologie und dem Gebiet der modellierenden Geowissenschaften sollte weiterhin bestehen, um auch zukünftig bei der Simulation von geologischen Gelände-Aufschlüssen eine Verbesserung der 3-D-Modellierung zu erreichen.
KW  - Karbonat
KW  - 3-D Modellierung
KW  - Aufschluss-Modellierung
KW  - Quantitative Daten
KW  - Skala
KW  - Stochastischer Algorithmus
KW  - Carbonate
KW  - 3-D outcrop modeling
KW  - quantitative data
KW  - scale
KW  - stochastic algorithms
Y1  - 2013
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-66621
ER  - 
TY  - JOUR
A1  - Baes, Marzieh
A1  - Gerya, Taras V.
A1  - Sobolev, Stephan Vladimir
T1  - 3-D thermo-mechanical modeling of plume-induced subduction initiation
JF  - Earth & planetary science letters
N2  - Here, we study the 3-D subduction initiation process induced by the interaction between a hot thermochemical mantle plume and oceanic lithosphere using thermo-mechanical viscoplastic finite difference marker-in-cell models. Our numerical modeling results show that self-sustaining subduction is induced by plume-lithosphere interaction when the plume is sufficiently buoyant, the oceanic lithosphere is sufficiently old and the plate is weak enough to allow the buoyant plume to. pass through it. Subduction initiation occurs following penetration of the lithosphere by the hot plume and the downward displacement of broken, nearly circular segments of lithosphere (proto-slabs) as a result of partially molten plume rocks overriding the proto-slabs. Our experiments show four different deformation regimes in response to plume-lithosphere interaction: a) self-sustaining subduction initiation, in which subduction becomes self-sustaining; b) frozen subduction initiation, in which subduction stops at shallow depths; c) slab break-off, in which the subducting circular slab breaks off soon after formation; and d) plume underplating, in which the plume does not pass through the lithosphere and instead spreads beneath it (i.e., failed subduction initiation). These regimes depend on several parameters, such as the size, composition, and temperature of the plume, the brittle/plastic strength and age of the oceanic lithosphere, and the presence/absence of lithospheric heterogeneities. The results show that subduction initiates and becomes self-sustaining when the lithosphere is older than 10 Myr and the non dimensional ratio of the plume buoyancy force and lithospheric strength above the plume is higher than approximately 2. The outcomes of our numerical experiments are applicable for subduction initiation in the modern and Precambrian Earth and for the origin of plume-related corona structures on Venus. (C) 2016 Elsevier B.V. All rights reserved.
KW  - subduction initiation
KW  - mantle plume
KW  - oceanic lithosphere
KW  - numerical models
Y1  - 2016
U6  - https://doi.org/10.1016/j.epsl.2016.08.023
SN  - 0012-821X
SN  - 1385-013X
VL  - 453
SP  - 193
EP  - 203
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - THES
A1  - Koyan, Philipp
T1  - 3D attribute analysis and classification to interpret ground-penetrating radar (GPR) data collected across sedimentary environments: Synthetic studies and field examples
T1  - 3D Attributanalyse und -klassifizierung zur Interpretation von Georadar-Daten in sedimentären Umgebungen: Synthetische Studien und Feldbeispiele
N2  - Die Untersuchung des oberflächennahen Untergrundes erfolgt heutzutage bei Frage- stellungen aus den Bereichen des Bauwesens, der Archäologie oder der Geologie und Hydrologie oft mittels zerstörungsfreier beziehungsweise zerstörungsarmer Methoden der angewandten Geophysik. Ein Bereich, der eine immer zentralere Rolle in Forschung und Ingenieurwesen einnimmt, ist die Untersuchung von sedimentären Umgebungen, zum Beispiel zur Charakterisierung oberflächennaher Grundwassersysteme. Ein in diesem Kontext häufig eingesetztes Verfahren ist das des Georadars (oftmals GPR - aus dem Englischen ground-penetrating radar). Dabei werden kurze elektromagnetische Impulse von einer Antenne in den Untergrund ausgesendet, welche dort wiederum an Kontrasten der elektromagnetischen Eigenschaften (wie zum Beispiel an der Grundwasseroberfläche) reflektiert, gebrochen oder gestreut werden. Eine Empfangsantenne zeichnet diese Signale in Form derer Amplituden und Laufzeiten auf. Eine Analyse dieser aufgezeichneten Signale ermöglicht Aussagen über den Untergrund, beispielsweise über die Tiefenlage der Grundwasseroberfläche oder die Lagerung und Charakteristika oberflächennaher Sedimentschichten. Dank des hohen Auflösungsvermögens der GPR-Methode sowie stetiger technologischer Entwicklungen erfolgt heutzutage die Aufzeichnung von GPR- Daten immer häufiger in 3D.
Trotz des hohen zeitlichen und technischen Aufwandes für die Datenakquisition und -bearbeitung werden die resultierenden 3D-Datensätze, welche den Untergrund hochauflösend abbilden, typischerweise von Hand interpretiert. Dies ist in der Regel ein äußerst zeitaufwendiger Analyseschritt. Daher werden oft repräsentative 2D-Schnitte aus dem 3D-Datensatz gewählt, in denen markante Reflektionsstrukuren markiert werden. Aus diesen Strukturen werden dann sich ähnelnde Bereiche im Untergrund als so genannte Radar-Fazies zusammengefasst. Die anhand von 2D-Schnitten erlangten Resultate werden dann als repräsentativ für die gesamte untersuchte Fläche angesehen. In dieser Form durchgeführte Interpretationen sind folglich oft unvollständig sowie zudem in hohem Maße von der Expertise der Interpretierenden abhängig und daher in der Regel nicht reproduzierbar.
Eine vielversprechende Alternative beziehungsweise Ergänzung zur manuellen In- terpretation ist die Verwendung von so genannten GPR-Attributen. Dabei werden nicht die aufgezeichneten Daten selbst, sondern daraus abgeleitete Größen, welche die markanten Reflexionsstrukturen in 3D charakterisieren, zur Interpretation herangezogen. In dieser Arbeit wird anhand verschiedener Feld- und Modelldatensätze untersucht, welche Attribute sich dafür insbesondere eignen. Zudem zeigt diese Arbeit, wie ausgewählte Attribute mittels spezieller Bearbeitungs- und Klassifizierungsmethoden zur Erstellung von 3D-Faziesmodellen genutzt werden können. Dank der Möglichkeit der Erstellung so genannter attributbasierter 3D-GPR-Faziesmodelle können zukünftige Interpretationen zu gewissen Teilen automatisiert und somit effizienter durchgeführt werden. Weiterhin beschreiben die so erhaltenen Resultate den untersuchten Untergrund in reproduzierbarer Art und Weise sowie umfänglicher als es bisher mittels manueller Interpretationsmethoden typischerweise möglich war.
N2  - Today, near-surface investigations are frequently conducted using non-destructive or minimally invasive methods of applied geophysics, particularly in the fields of civil engineering, archaeology, geology, and hydrology. One field that plays an increasingly central role in research and engineering is the examination of sedimentary environments, for example, for characterizing near-surface groundwater systems. A commonly employed method in this context is ground-penetrating radar (GPR). In this technique, short electromagnetic pulses are emitted into the subsurface by an antenna, which are then reflected, refracted, or scattered at contrasts in electromagnetic properties (such as the water table). A receiving antenna records these signals in terms of their amplitudes and travel times. Analysis of the recorded signals allows for inferences about the subsurface, such as the depth of the groundwater table or the composition and characteristics of near-surface sediment layers. Due to the high resolution of the GPR method and continuous technological advancements, GPR data acquisition is increasingly performed in three-dimensional (3D) fashion today.
Despite the considerable temporal and technical efforts involved in data acquisition and processing, the resulting 3D data sets (providing high-resolution images of the subsurface) are typically interpreted manually. This is generally an extremely time-consuming analysis step. Therefore, representative 2D sections highlighting distinctive reflection structures are often selected from the 3D data set. Regions showing similar structures are then grouped into so-called radar facies. The results obtained from 2D sections are considered representative of the entire investigated area. Interpretations conducted in this manner are often incomplete and highly dependent on the expertise of the interpreters, making them generally non-reproducible.
A promising alternative or complement to manual interpretation is the use of GPR attributes. Instead of using the recorded data directly, derived quantities characterizing distinctive reflection structures in 3D are applied for interpretation. Using various field and synthetic data sets, this thesis investigates which attributes are particularly suitable for this purpose. Additionally, the study demonstrates how selected attributes can be utilized through specific processing and classification methods to create 3D facies models. The ability to generate attribute-based 3D GPR facies models allows for partially automated and more efficient interpretations in the future. Furthermore, the results obtained in this manner describe the subsurface in a reproducible and more comprehensive manner than what has typically been achievable through manual interpretation methods.
KW  - ground-penetrating radar
KW  - sedimentary environments
KW  - 3D
KW  - applied geophysics
KW  - near-surface geophysics
KW  - Georadar
KW  - sedimentäre Systeme
KW  - angewandte Geophysik
KW  - oberflächennahe Geophysik
KW  - Attribute
KW  - attributes
KW  - geophysics
KW  - Geophysik
Y1  - 2024
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-639488
ER  - 
TY  - JOUR
A1  - Kaiser, Björn Onno
A1  - Cacace, Mauro
A1  - Scheck-Wenderoth, Magdalena
T1  - 3D coupled fluid and heat transport simulations of the Northeast German Basin and their sensitivity to the spatial discretization - different sensitivities for different mechanisms of heat transport
JF  - Environmental earth sciences
N2  - Based on a numerical model of the Northeast German Basin (NEGB), we investigate the sensitivity of the calculated thermal field as resulting from heat conduction, forced and free convection in response to consecutive horizontal and vertical mesh refinements. Our results suggest that computational findings are more sensitive to consecutive horizontal mesh refinements than to changes in the vertical resolution. In addition, the degree of mesh sensitivity depends strongly on the type of the process being investigated, whether heat conduction, forced convection or free thermal convection represents the active heat driver. In this regard, heat conduction exhibits to be relative robust to imposed changes in the spatial discretization. A systematic mesh sensitivity is observed in areas where forced convection promotes an effective role in shorten the background conductive thermal field. In contrast, free thermal convection is to be regarded as the most sensitive heat transport process as demonstrated by non-systematic changes in the temperature field with respect to imposed changes in the model resolution.
KW  - Mesh convergence
KW  - Conduction
KW  - Advection
KW  - Convection
KW  - Thermal field
KW  - Northeast German Basin
Y1  - 2013
U6  - https://doi.org/10.1007/s12665-013-2249-7
SN  - 1866-6280
SN  - 1866-6299
VL  - 70
IS  - 8
SP  - 3643
EP  - 3659
PB  - Springer
CY  - New York
ER  - 
TY  - JOUR
A1  - Ibarra, Federico
A1  - Liu, Sibiao
A1  - Meeßen, Christian
A1  - Prezzi, Claudia Beatriz
A1  - Bott, Judith
A1  - Scheck-Wenderoth, Magdalena
A1  - Sobolev, Stephan Vladimir
A1  - Strecker, Manfred
T1  - 3D data-derived lithospheric structure of the Central Andes and its implications for deformation: Insights from gravity and geodynamic modelling
JF  - Tectonophysics : international journal of geotectonics and the geology and physics of the interior of the earth
N2  - We present a new three-dimensional density model of the Central Andes characterizing the structure and composition of the lithosphere together with a geodynamic simulation subjected to continental intraplate shortening. The principal aim of this study is to assess the link between heterogeneities in the lithosphere and different deformation patterns and styles along the orogen-foreland system of the Central Andes. First, we performed a 3D integration of new geological and geophysical data with previous models through forward modelling of Bouguer anomalies. Subsequently, a geodynamic model was set-up and parametrized from the previously obtained 3D structure and composition. We do not find a unambigous correlation between the resulting density configuration and terrane boundaries proposed by other authors. Our models reproduce the observed Bouguer anomaly and deformation patterns in the foreland. We find that thin-skinned deformation in the Subandean fold-and thrust belt is controlled by a thick sedimentary layer and coeval underthrusting of thin crust of the foreland beneath the thick crust of the Andean Plateau. In the adjacent thick-skinned deformation province of the inverted Cretaceous extensional Santa Barbara System sedimentary strata are much thinner and crustal thickness transitions from greater values in the Andean to a more reduced thickness in the foreland. Our results show that deformation processes occur where the highest gradients of lithospheric strength are present between the orogen and the foreland, thus suggesting a spatial correlation between deformation and lithospheric strength.
KW  - Central Andes
KW  - Lithospheric structure
KW  - Gravity modelling
KW  - Geodynamic modelling
KW  - Deformation
Y1  - 2019
U6  - https://doi.org/10.1016/j.tecto.2019.06.025
SN  - 0040-1951
SN  - 1879-3266
VL  - 766
SP  - 453
EP  - 468
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Allroggen, Niklas
A1  - Heincke, Bjorn H.
A1  - Koyan, Philipp
A1  - Wheeler, Walter
A1  - Ronning, Jan S.
T1  - 3D ground-penetrating radar attribute classification
BT  - a case study from a paleokarst breccia pipe in the Billefjorden area on Spitsbergen, Svalbard
JF  - Geophysics
N2  - Ground-penetrating radar (GPR) is a method that can provide detailed information about the near subsurface in sedimentary and carbonate environments. 
The classical interpretation of GPR data (e.g., based on manual feature selection) often is labor-intensive and limited by the experience of the intercally used for seismic interpretation, can provide faster, more repeatable, and less biased interpretations. We have recorded a 3D GPD data set collected across a paleokarst breccia pipe in the Billefjorden area on Spitsbergen, Svalbard. After performing advanced processing, we compare the results of a classical GPR interpretation to the results of an attribute-based classification. 

Our attribute classification incorporates a selection of dip and textural attributes as the input for a k-means clustering approach. Similar to the results of the classical interpretation, the resulting classes differentiate between undisturbed strata and breccias or fault zones. 
The classes also reveal details inside the breccia pipe that are not discerned in the classical fer that the intrapipe GPR facies result from subtle differences, such as breccia lithology, clast size, or pore-space filling.
Y1  - 2022
U6  - https://doi.org/10.1190/GEO2021-0651.1
SN  - 0016-8033
SN  - 1942-2156
VL  - 87
IS  - 4
SP  - WB19
EP  - WB30
PB  - Society of Exploration Geophysicists
CY  - Tulsa
ER  - 
TY  - JOUR
A1  - Koyan, Philipp
A1  - Tronicke, Jens
A1  - Allroggen, Niklas
T1  - 3D ground-penetrating radar attributes to generate classified facies models
BT  - a case study from a dune island
JF  - Geophysics
N2  - Ground-penetrating radar (GPR) is a standard geophysical technique used to image near-surface structures in sedimentary environments. In such environments, GPR data acquisition and processing are increasingly following 3D strategies. However, the processed GPR data volumes are typically still interpreted using selected 2D slices and manual concepts such as GPR facies analyses. In seismic volume interpretation, the application of (semi-)automated and reproducible approaches such as 3D attribute analyses as well as the production of attribute-based facies models are common practices today. In contrast, the field of 3D GPR attribute analyses and corresponding facies models is largely untapped. We have developed and applied a workflow to produce 3D attribute-based GPR facies models comprising the dominant sedimentary reflection patterns in a GPR volume, which images complex sandy structures on the dune island of Spiekeroog (Northern Germany). After presenting our field site and details regarding our data acquisition and processing, we calculate and filter 3D texture attributes to generate a database comprising the dominant texture features of our GPR data. Then, we perform a dimensionality reduction of this database to obtain meta texture attributes, which we analyze and integrate using composite imaging and (also considering additional geometric information) fuzzy c-means cluster analysis resulting in a classified GPR facies model. Considering our facies model and a corresponding GPR facies chart, we interpret our GPR data set in terms of near-surface sedimentary units, the corresponding depositional environments, and the recent formation history at our field site. Thus, we demonstrate the potential of our workflow, which represents a novel and clear strategy to perform a more objective and consistent interpretation of 3D GPR data collected across different sedimentary environments.
KW  - ground-penetrating radar
KW  - attributes
KW  - interpretation
KW  - sedimentology
Y1  - 2021
U6  - https://doi.org/10.1190/GEO2021-0204.1
SN  - 0016-8033
SN  - 1942-2156
VL  - 86
IS  - 6
SP  - B335
EP  - B347
PB  - Society of Exploration Geophysicists
CY  - Tulsa
ER  - 
TY  - JOUR
A1  - Schennen, Stephan
A1  - Tronicke, Jens
A1  - Wetterich, Sebastian
A1  - Allroggen, Niklas
A1  - Schwamborn, Georg
A1  - Schirrmeister, Lutz
T1  - 3D ground-penetrating radar imaging of ice complex deposits in northern East Siberia
JF  - Geophysics
N2  - Ice complex deposits are characteristic, ice-rich formations in northern East Siberia and represent an important part in the arctic carbon pool. Recently, these late Quaternary deposits are the objective of numerous investigations typically relying on outcrop and borehole data. Many of these studies can benefit from a 3D structural model of the subsurface for upscaling their observations or for constraining estimations of inventories, such as the local carbon stock. We have addressed this problem of structural imaging by 3D ground-penetrating radar (GPR), which, in permafrost studies, has been primarily used for 2D profiling. We have used a 3D kinematic GPR surveying strategy at a field site located in the New Siberian Archipelago on top of an ice complex. After applying a 3D GPR processing sequence, we were able to trace two horizons at depths below 20 m. Taking available borehole and outcrop data into account, we have interpreted these two features as interfaces of major lithologic units and derived a 3D cryostratigraphic model of the subsurface. Our data example demonstrated that a 3D surveying and processing strategy was crucial at our field site and showed the potential of 3D GPR to image geologic structures in complex ice-rich permafrost landscapes.
Y1  - 2016
U6  - https://doi.org/10.1190/GEO2015-0129.1
SN  - 0016-8033
SN  - 1942-2156
VL  - 81
SP  - WA195
EP  - WA202
PB  - Society of Exploration Geophysicists
CY  - Tulsa
ER  - 
TY  - JOUR
A1  - Platz, Anna
A1  - Weckmann, Ute
A1  - Pek, Josef
A1  - Kovacikova, Svetlana
A1  - Klanica, Radek
A1  - Mair, Johannes
A1  - Aleid, Basel
T1  - 3D imaging of the subsurface electrical resistivity structure in West Bohemia/Upper Palatinate covering mofettes and quaternary volcanic structures by using magnetotellurics
JF  - Tectonophysics : international journal of geotectonics and the geology and physics of the interior of the earth
N2  - The region of West Bohemia and Upper Palatinate belongs to the West Bohemian Massif. The study area is situated at the junction of three different Variscan tectonic units and hosts the ENE-WSW trending Ohre Rift as well as many different fault systems. The entire region is characterized by ongoing magmatic processes in the intra-continental lithospheric mantle expressed by a series of phenomena, including e.g. the occurrence of repeated earthquake swarms and massive degassing of mantle derived CO2 in form of mineral springs and mofettes. Ongoing active tectonics is mainly manifested by Cenozoic volcanism represented by different Quaternary volcanic structures. All these phenomena make the Ohre Rift a unique target area for European intra-continental geo-scientific research. With magnetotelluric (MT) measurements we image the subsurface distribution of the electrical resistivity and map possible fluid pathways. Two-dimensional (2D) inversion results by Munoz et al. (2018) reveal a conductive channel in the vicinity of the earthquake swarm region that extends from the lower crust to the surface forming a pathway for fluids into the region of the mofettes. A second conductive channel is present in the south of their model; however, their 2D inversions allow ambiguous interpretations of this feature. Therefore, we conducted a large 3D MT field experiment extending the study area towards the south. The 3D inversion result matches well with the known geology imaging different fluid/magma reservoirs at crust-mantle depth and mapping possible fluid pathways from the reservoirs to the surface feeding known mofettes and spas. A comparison of 3D and 2D inversion results suggests that the 2D inversion results are considerably characterized by 3D and off-profile structures. In this context, the new results advocate for the swarm earthquakes being located in the resistive host rock surrounding the conductive channels; a finding in line with observations e.g. at the San Andreas Fault, California.
KW  - Magnetotellurics
KW  - Ohre Rift
KW  - Conductive channel
KW  - Fluid/magma reservoir
KW  - Earthquake swarm
Y1  - 2022
U6  - https://doi.org/10.1016/j.tecto.2022.229353
SN  - 0040-1951
SN  - 1879-3266
VL  - 833
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Koyan, Philipp
A1  - Tronicke, Jens
T1  - 3D modeling of ground-penetrating radar data across a realistic sedimentary model
JF  - Computers & geosciences : an international journal devoted to the publication of papers on all aspects of geocomputation and to the distribution of computer programs and test data sets ; an official journal of the International Association for Mathematical Geology
N2  - Ground-penetrating radar (GPR) is an established geophysical tool to explore a wide range of near-surface environments. Today, the use of synthetic GPR data is largely limited to 2D because 3D modeling is computationally more expensive. In fact, only recent developments of modeling tools and powerful hardware allow for a time-efficient computation of extensive 3D data sets. Thus, 3D subsurface models and resulting GPR data sets, which are of great interest to develop and evaluate novel approaches in data analysis and interpretation, have not been made publicly available up to now. <br /> We use a published hydrofacies data set of an aquifer-analog study within fluvio-glacial deposits to infer a realistic 3D porosity model showing heterogeneities at multiple spatial scales. Assuming fresh-water saturated sediments, we generate synthetic 3D GPR data across this model using novel GPU-acceleration included in the open-source software gprMax. We present a numerical approach to examine 3D wave-propagation effects in modeled GPR data. Using the results of this examination study, we conduct a spatial model decomposition to enable a computationally efficient 3D simulation of a typical GPR reflection data set across the entire model surface. We process the resulting GPR data set using a standard 3D structural imaging sequence and compare the results to selected input data to demonstrate the feasibility and potential of the presented modeling studies. We conclude on conceivable applications of our 3D GPR reflection data set and the underlying porosity model, which are both publicly available and, thus, can support future methodological developments in GPR and other near-surface geophysical techniques.
KW  - Applied geophysics
KW  - Ground-penetrating radar
KW  - 3D modeling
Y1  - 2020
U6  - https://doi.org/10.1016/j.cageo.2020.104422
SN  - 0098-3004
SN  - 1873-7803
VL  - 137
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Franz, Gerhard
A1  - Sudo, Masafumi
A1  - Khomenko, Vladimir
T1  - 40Ar/39Ar dating of a hydrothermal pegmatitic buddingtonite–muscovite assemblage from Volyn, Ukraine
JF  - European journal of mineralogy : EJM : an international journal on mineralogy, petrology, geochemistry, and related sciences
N2  - We determined Ar-40/Ar-39 ages of buddingtonite, occurring together with muscovite, with the laser-ablation method. This is the first attempt to date the NH4-feldspar buddingtonite, which is typical for sedimentary-diagenetic environments of sediments, rich in organic matter, or in hydrothermal environments, associated with volcanic geyser systems. The sample is a hydrothermal breccia, coming from the Paleoproterozoic pegmatite field of the Korosten Plutonic Complex, Volyn, Ukraine. A detailed characterization by optical methods, electron microprobe analyses, backscattered electron imaging, and IR analyses showed that the buddingtonite consists of euhedral-appearing platy crystals of tens of micrometers wide, 100 or more micrometers in length, which consist of fine-grained fibers of <= 1 mu m thickness. The crystals are sector and growth zoned in terms of K-NH4-H3O content. The content of K allows for an age determination with the Ar-40/Ar-39 method, as well as in the accompanying muscovite, intimately intergrown with the buddingtonite. The determinations on muscovite yielded an age of 1491 +/- 9 Ma, interpreted as the hydrothermal event forming the breccia. However, buddingtonite apparent ages yielded a range of 563 +/- 14 Ma down to 383 +/- 12 Ma, which are interpreted as reset ages due to Ar loss of the fibrous buddingtonite crystals during later heating. We conclude that buddingtonite is suited for Ar-40/Ar-39 age determinations as a supplementary method, together with other methods and minerals; however, it requires a detailed mineralogical characterization, and the ages will likely represent minimum ages.
Y1  - 2022
U6  - https://doi.org/10.5194/ejm-34-7-2022
SN  - 0935-1221
SN  - 1617-4011
VL  - 34
IS  - 1
SP  - 7
EP  - 18
PB  - Copernicus
CY  - Göttingen
ER  - 
TY  - THES
A1  - Engelhardt, Jonathan
T1  - 40Ar/39Ar geochronology of ICDP PALEOVAN drilling cores
T1  - 40Ar/39Ar Geochronologie der ICDP PALEOVAN Bohrkerne
N2  - The scientific drilling campaign PALEOVAN was conducted in the summer of 2010 and was part of the international continental drilling programme (ICDP). The main goal of the campaign was the recovery of a sensitive climate archive in the East of Anatolia. Lacustrine deposits underneath the lake floor of ‘Lake Van’ constitute this archive. The drilled core material was recovered from two locations: the Ahlat Ridge and the Northern Basin. A composite core was constructed from cored material of seven parallel boreholes at the Ahlat Ridge and covers an almost complete lacustrine history of Lake Van. The composite record offered sensitive climate proxies such as variations of total organic carbon, K/Ca ratios, or a relative abundance of arboreal pollen. These proxies revealed patterns that are similar to climate proxy variations from Greenland ice cores. Climate variations in Greenland ice cores have been dated by modelling the timing of orbital forces to affect the climate. Volatiles from melted ice aliquots are often taken as high-resolution proxies and provide a base for fitting the according temporal models.
The ICDP PALEOVAN scientific team fitted proxy data from the lacustrine drilling record to ice core data and constructed an age model. Embedded volcaniclastic layers had to be dated radiometrically in order to provide independent age constraints to the climate-stratigraphic age model. Solving this task by an application of the 40Ar/39Ar method was the main objective of this thesis. Earlier efforts to apply the 40Ar/39Ar dating resulted in inaccuracies that could not be explained satisfactorily.
The absence of K-rich feldspars in suitable tephra layers implied that feldspar crystals needed to be 500 μm in size minimum, in order to apply single-crystal 40Ar/39Ar dating. Some of the samples did not contain any of these grain sizes or only very few crystals of that size. In order to overcome this problem this study applied a combined single-crystal and multi-crystal approach with different crystal fractions from the same sample. The preferred method of a stepwise heating analysis of an aliquot of feldspar crystals has been applied to three samples. The Na-rich crystals and their young geological age required 20 mg of inclusion-free, non-corroded feldspars. Small sample volumes (usually 25 % aliquots of 5 cm3 of sample material – a spoon full of tephra) and the widespread presence of melt-inclusion led to the application of combined single- and multigrain total fusion analyses. 40Ar/39Ar  analyses on single crystals have the advantage of being able to monitor the presence of excess 40Ar and detrital or xenocrystic contamination in the samples. Multigrain analyses may hide the effects from these obstacles. The results from the multigrain analyses are therefore discussed with respect to the findings from the respective cogenetic single crystal ages. Some of the samples in this study were dated by 40Ar/39Ar on feldspars on multigrain separates and (if available) in combination with only a few single crystals. 40Ar/39Ar ages from two of the samples deviated statistically from the age model. All other samples resulted in identical ages. The deviations displayed older ages than those obtained from the age model. t-Tests compared radiometric ages with available age control points from various proxies and from the relative paleointensity of the earth magnetic field within a stratigraphic range of ± 10 m. Concordant age control points from different relative chronometers indicated that deviations are a result of erroneous 40Ar/39Ar ages. The thesis argues two potential reasons for these ages: (1) the irregular appearance of 40Ar from rare melt- and fluid- inclusions and (2) the contamination of the samples with older crystals due to a rapid combination of assimilation and ejection. 
Another aliquot of feldspar crystals that underwent separation for the application of 40Ar/39Ar dating was investigated for geochemical inhomogeneities. Magmatic zoning is ubiquitous in the volcaniclastic feldspar crystals. Four different types of magmatic zoning were detected. The zoning types are compositional zoning (C-type zoning), pseudo-oscillatory zoning of trace ele- ment concentrations (PO-type zoning), chaotic and patchy zoning of major and trace element concentrations (R-type zoning) and concentric zoning of trace elements (CC-type zoning). Sam- ples that deviated in 40Ar/39Ar  ages showed C-type zoning, R-type zoning or a mix of different types of zoning (C-type and PO-type). Feldspars showing PO-type zoning typically represent the smallest grain size fractions in the samples. The constant major element compositions of these crystals are interpreted to represent the latest stages in the compositional evolution of feldspars in a peralkaline melt. PO-type crystals contain less melt- inclusions than other zoning types and are rarely corroded. This thesis concludes that feldspars that show PO-type zoning are most promising chronometers for the 40Ar/39Ar method, if samples provide mixed zoning types of Quaternary anorthoclase feldspars.
Five samples were dated by applying the 40Ar/39Ar method to volcanic glass. High fractions of atmospheric Ar (typically > 98%) significantly hampered the precision of the 40Ar/39Ar ages and resulted in rough age estimates that widely overlap the age model. Ar isotopes indicated that the glasses bore a chorine-rich Ar-end member. The chlorine-derived 38Ar indicated chlorine-rich fluid-inclusions or the hydration of the volcanic glass shards. This indication strengthened the evidence that irregularly distributed melt-inclusions and thus irregular distributed excess 40Ar influenced the problematic feldspar 40Ar/39Ar ages. Whether a connection between a corrected initial 40Ar/36Ar ratio from glasses to the 40Ar/36Ar ratios from pore waters exists remains unclear.
This thesis offers another age model, which is similarly based on the interpolation of the temporal tie points from geophysical and climate-stratigraphic data. The model used a PCHIP- interpolation (piecewise cubic hermite interpolating polynomial) whereas the older age model used a spline-interpolation. Samples that match in ages from 40Ar/39Ar dating of feldspars with the earlier published age model were additionally assigned with an age from the PCHIP- interpolation. These modelled ages allowed a recalculation of the Alder Creek sanidine mineral standard. The climate-stratigraphic calibration of an 40Ar/39Ar mineral standard proved that the age versus depth interpolations from PAELOVAN drilling cores were accurate, and that the applied chronometers recorded the temporal evolution of Lake Van synchronously.
Petrochemical discrimination of the sampled volcaniclastic material is also given in this thesis. 41 from 57 sampled volcaniclastic layers indicate Nemrut as their provenance. Criteria that served for the provenance assignment are provided and reviewed critically. Detailed correlations of selected PALEOVAN volcaniclastics to onshore samples that were described in detail by earlier studies are also discussed. The sampled volcaniclastics dominantly have a thickness of < 40 cm and have been ejected by small to medium sized eruptions. Onshore deposits from these types of eruptions are potentially eroded due to predominant strong winds on Nemrut and Süphan slopes. An exact correlation with the data presented here is therefore equivocal or not possible at all.
Deviating feldspar 40Ar/39Ar ages can possibly be explained by inherited 40Ar from feldspar xenocrysts contaminating the samples. In order to test this hypothesis diffusion couples of Ba were investigated in compositionally zoned feldspar crystals. The diffusive behaviour of Ba in feldspar is known, and gradients in the changing concentrations allowed for the calculation of the duration of the crystal’s magmatic development since the formation of the zoning interface. Durations were compared with degassing scenarios that model the Ar-loss during assimilation and subsequent ejection of the xenocrystals. Diffusive equilibration of the contrasting Ba concentrations is assumed to generate maximum durations as the gradient could have been developed in several growth and heating stages. The modelling does not show any indication of an involvement of inherited 40Ar in any of the deviating samples. However, the analytical set-up represents the lower limit of the required spatial resolution. Therefore, it cannot be excluded that the degassing modelling relies on a significant overestimation of the maximum duration of the magmatic history. Nevertheless, the modelling of xenocrystal degassing evidences that the irregular incorporation of excess 40Ar by melt- and fluid inclusions represents the most critical problem that needs to be overcome in dating volcaniclastic feldspars from the PALEOVAN drill cores. This thesis provides the complete background in generating and presenting 40Ar/39Ar ages that are compared to age data from a climate-stratigraphic model. Deviations are identified statistically and then discussed in order to find explanations from the age model and/or from 40Ar/39Ar geochronology. Most of the PALEOVAN stratigraphy provides several chronometers that have been proven for their synchronicity. Lacustrine deposits from Lake Van represent a key archive for reconstructing climate evolution in the eastern Mediterranean and in the Near East. The PALEOVAN record offers a climate-stratigraphic age model with a remarkable accuracy and resolution.
N2  - Die PALEOVAN−Bohrkampagne des internationalen kontinentalen Bohrprogramms ICDP wurde im Sommer 2010 realisiert. Das übergeordnete Ziel dieser Kampagne war die Entnahme eines Klimaarchivs im Osten Anatoliens. Als Archiv dienen Süßwasserablagerungen am Grund des Vansees. PALEOVAN Bohrkerne bieten lakustrine Ablagerungen von zwei Lokalitäten des Sees, und zwar der Ahlat Ridge und des Northern Basins. Durch das Zusammenstellen bestmöglicher Bohrkernbestände aus sieben parallelen Bohrungen auf der Ahlat Ridge, konnte die nahezu vollständige Aufzeichnung der Geschichte des Sees gewonnen werden. Dieses detaillierte Archiv zeichnete sensible Klimafaktoren auf. Als Beispiele sind zu nennen: die Variationen organischen Kohlenstoffs, das Verhältnis von Kalium zu Kalzium und die Anteile arborealer Pollen gegenüber dem Gesamtpollenbestand. Stellvertreterdaten für Klimavariationen (sogenannte Proxies) ähneln in ihrem Muster sehr stark den bekannten Klimavariationen aus Eisbohrkernen des Grönlandeises. Da das Timing der Klimavariationen in den Grönlandeiskernen durch Datierungen mithilfe im Eis gespeicherter Gasphasen und orbitaler Modellberechnungen sehr genau bekannt ist, konnten Sedimentolog*innen des PALEOVAN−Teams ein klimastratigraphisches Altersmodell aus den Proxies berechnen. Die Kernaufgabe der hier vorgelegten Dissertation ist es, eingelagerte pyroklastische Ablagerungen mithilfe der 40Ar/39Ar−Methode zu datieren und das Altersmodell zu diskutieren. Die Notwendigkeit der 40Ar/39Ar−Datierungen war besonders gegeben, da vorab publizierte radiometrische Datierungen von ICDP−PALEOVAN Bohrkernen statistisch nicht ausreichend beschrieben wurden und vorhandene Abweichungen gegenüber dem Altersmodell undiskutiert blieben.
An der westlichen und nördlichen Küste des Sees befinden sich zwei Stratovulkane: Nemrut und Süphan. Beide Vulkane haben über die Dauer der kompletten Seegeschichte pyroklastisches Material im See abgelagert. Feldspäte und vulkanische Gläser aus rhyolitischen und trachytischen Auswurfprodukten wurden auf ihre Zusammensetzung untersucht und es wurde ihre Eignung für eine Anwendung der 40Ar/39Ar−Geochronologie festgestellt. Die Abwesenheit hoher Kaliumkonzentrationen in Feldspäten aus geeigneten pyroklastischen Lagen bedeutet, dass Kristalle eine Mindestgröße von ca. 500 Mikrometer benötigen, um Analysen an einzelnen Kristallen durchführen zu können. Nicht alle Proben liefern ausreichend Kristalle dieser groben Korngröße. Somit wurde eine Methode gewählt, die Mehrkorn und Einzelkornanalysen miteinander kombiniert. Die bevorzugte Methode des schrittweisen Ausheizens war nur mit drei Proben möglich. Grund dafür ist, dass der geringe Kaliumgehalt und das junge geologische Alter große Mengen (ca. 20 mg) einschluss− und korrosionsfreier Feldspäte benötigten. Die geringen Probenmengen (25% Aliquot von üblicherweise 5 cm3 Probenmaterial) und die Omnipräsenz von Schmelzeinschlüssen in den Feldspäten legten nahe, auf die Methodik des schlagartigen Ausheizens von Einzel− und Mehrkornproben zu setzen. 40Ar/39Ar−Datierungen an einzelnen Feldspäten haben den Vorteil, dass sich ein vorhandener Überschuss von 40Ar oder Kontaminationen detritischer Körner leicht feststellen lassen und in der Altersberechnung berücksichtigt werden können. Mehrkornanalysen zeigen diese Hürden nur bei intensiver Kontamination und bergen die Gefahr, radiometrische Alter zu bestimmen, die von dem tatsächlichen geologischen Alter abweichen, weil sie zu alt sind. 40Ar/39Ar−Datierungen in dieser Dissertation wurden deshalb für die meisten Proben mithilfe von Mehrkornanalysen und (wenn vorhanden) in Kombination mit wenigen Einzelkornanalysen durchgeführt.
Bis auf die Resultate zweier Proben sind die radiometrischen Alter der Feldspäte statistisch gesehen identisch zu den Altersabschätzungen des klimastratigraphischen Altersmodells. Abweichungen zeigen ausschließlich ältere radiometrische Alter einzelner Kornfraktionen. Die beiden abweichenden Proben sind ebenfalls älter als das Altersmodell. Eine statistische Auswertung mittels t−Tests beweist die Abweichungen der radiometrischen von den klimastratigraphischen Altersdaten. Das Altersmodell wurde mit jedem der radiometrischen Alter innerhalb eines stratigraphischen Einzugsbereichs von ± 10 Metern verglichen. Die Konkordanz der Altershinweise aus unterschiedlichen Klimaproxies und aus geophysikalischen Altershinweisen (durch das Identifizieren zeitlich bekannter Variationen des Erdmagnetfelds) legen nahe, dass beiden Abweichungen fehlerhafte 40 Ar/39 Ar−Datierungen zugrunde liegen. Zwei mögliche Ursachen werden in Betracht gezogen: (1) unregelmäßiges beziehungsweise vereinzeltes Auftreten von überschüssigem 40Ar im Zusammenhang mit Schmelz− und Fluideinschlüssen oder (2) Kontamination der Probe mit älteren, xenokristischen Feldspäten durch eine zügige (im Zeitraum von Tagen) Kombination von magmatischer Assimilation und Auswurf des Materials. Ebenfalls nicht auszuschließen ist eine detritische Kontamination. Die normalverteilten 40Ar/39Ar−Werte der Proben sind allerdings untypisch für eine detritische Kontamination.
Je ein Aliquot der selektierten Kristallfraktionen wurde intensiv auf vorhandene Zonierungen untersucht. Alle untersuchten Feldspatproben zeigen Elementzonierungen, die sich einteilen lassen. Die Zonierungen sind entweder kompositionelle Zonierungen der Hauptzusammensetzung („C-type – compositional type“), pseudo-oszillatorische Zonierungen gewisser Spurenelementkonzentrationen („PO-type“), konzentrische Zonierungen von Spurenelementkonzentrationen („CC-type – concentric type“) und chaotisch-fleckige Zonierungsmuster („R-type – resorbed and patchy“). Proben, deren 40Ar/39Ar−Alter abweichen, zeigen Zonierungen in ihrer Hauptzusammensetzung (C-type), fleckige Zonierungen (R-type) oder zeigen eine Mischung aus unterschiedlichen Zonierungstypen (C-type und PO-type). Feldspäte, die ausschließlich eine Zonierung ihrer Spurenelmente (PO-type) zeigen, liegen typischerweise in kleineren Korngrößen vor und markieren Zusammensetzungen, die typisch sind für die spätesten Phasen der magmatischen Entwicklung von Feldspäten in peralkalinen Gesteinen. Diese Kristalle sind in der Regel arm an Schmelzeinschlüssen und nur selten korrodiert. Die vorliegende Arbeit weist Feldspäte, die keine Zonierung in ihrer Hauptzusammensetzung, sondern nur pseudo-oszillatorische Spurenelementvariationen aufzeigen, als ideale Chronometer für die Anwendung der 40Ar/39Ar−Methode an Quartären, kaliumarmen Feldspäten aus.
Um Abweichende Proben erneut zu analysieren und um stratigraphische Abschnitte zu datieren, die nicht erfolgreich beprobt werden konnten, wurden fünf Proben datiert, indem die 40Ar/39Ar−Methode auf vulkanisches Glas angewendet wurde. Hohe Gehalte an atmosphärischem Argon (in der Regel > 98 %) führten allerdings zu ungenauen radiometrischen Altersbestimmungen, die aufgrund ihrer großen Fehler keine Abweichungen vom Altersmodell zeigen. Die Gläser zeigen Hinweise darauf, dass Variationen in den Altern der Feldspäte auf die Gegenwart eines Ar-Reservoirs in Schmelzeinschlüssen zurückzuführen sein könnte, das weder radiogen noch atmosphärisch ist. Ob eine Verknüpfung der Ar-Isotopien in vulkanischen Gläsern und in Porenwässern gegeben ist, bleibt offen. Instrumentelle und methodische Hürden lassen nur eine Vermutung zu, dass Porenwässer und vulkanische Gläser in ihren Ar-Isotopendaten eine Verknüpfung zeigen könnten.
Ein neues Alterstiefenmodell, das ebenfalls auf der Interpolation von Altershinweisen durch Klimaproxies und geophysikalischer Daten basiert wird in dieser Arbeit ebenfalls vorgelegt. Im Gegensatz zu bestehenden „Spline“-Interpolationen wurde in dieser Dissertation eine PCHIP- Interpolation bevorzugt. Abgesehen von abweichenden Proben wurden allen Proben, die mithilfe der 40Ar/39Ar−Methode an Feldspäten datiert sind, zusätzlich ein klimastratigraphisches Modellalter zugewiesen. Diese Modellalter bieten die Grundlage dafür, das Alter des in der Datierung benutzten Mineralstandards (Alder Creek Sanidine) nachrechnen zu können. Die erfolgreiche klimastratigraphische Kalibrierung des Standards beweist, dass Alterstiefenmodelle aus den PALEOVAN-Bohrkernen genau sind, und dass alle verwendeten Chronometer innerhalb der angezeigten Varianzen ein synchrones Timing zulassen.
Die Dissertation bietet petrochemische Charakterisierungen der entnommenen Proben an und diskutiert nachvollziehbar mögliche Provenanzen der Pyroklastite. 41 von 57 entnommenen Proben lassen sich Nemrut zuordnen. Kriterien, die für eine Zuordnung herangezogen wurden, werden aufgezeigt und diskutiert. Eine mögliche Korrelation der datierten Proben zu pyroklastischen Einheiten, die in der Literatur an den Hängen der Stratovulkane im Detail beschrieben wurden, wird ebenfalls diskutiert. Die beprobten pyroklasitischen Lagen haben geringe Mächtigkeiten (in der Regel < 40 cm) und liegen mittleren bis kleineren Eruptionen zugrunde. Diese Eruptionen hinterlassen keine oder nur schwer definierbare pyroklastische Einheiten von geringer Mächtigkeit an Land. Eine genaue Korrelation ist mit den hier präsentierten Daten deshalb nicht oder nur sehr vage möglich.
Abweichende radiometrische Alter aus Datierungen von Feldspat könnten im Zusammenhang mit vererbtem 40Ar aus Xenokristallen stehen. Um diese Hypothese zu testen, wurden diffusionsabhängige Konzentrationsschwankungen von Barium in zonierten Feldspäten untersucht. Da das diffusive Verhalten von Barium in Feldspat bekannt ist, kann durch die Analyse des Konzentrationsgradienten die Dauer der magmatischen Entwicklung ab der Bildung der untersuchten Zonierung berechnet werden. Diese Zeitspanne wurde genutzt, um zu modellieren, ob Xenokristalle während einer unvollständigen Assimilation komplett entgast werden. Dafür wurde angenommen, dass das diffusive Angleichen von unterschiedlichen Bariumkonzentrationen maximale Werte für die Dauer von der Assimilation bis zum Auswurf liefert. Die Modellierung zeigt, dass vererbtes 40Ar aus Xenokristallen keinen Anteil an den abweichenden Altern haben. Allerdings sind die erhobenen Diffusionsgradienten am Rande der benötigten analytischen Auflösung, und eine Überschätzung der Dauer der magmatischen Prozesse kann nicht ausgeschlossen werden. Die Diffusionsprofile sind ein weiterer Hinweis dafür, dass unregelmäßige beziehungsweise vereinzelte Quellen von überschüssigem 40Ar die schwierigste Hürde für 40Ar/39Ar−Datierungen an ICDP-PALEOVAN Bohrkernen darstellen.
Die vorgelegte Arbeit bietet nicht nur 40Ar/39Ar−Datierungen, um das vorhandene Altersmodell kritisch zu diskutieren, sondern zeigt, wie Abweichungen statistisch zu erfassen sind, welche mineralogischen Beobachtungen in die Interpretation abweichender radiometrischer Alter miteinbezogen werden sollten und wie die Synchronizität verschiedener Chronometer getestet werden kann. Die Korrektheit des klima-stratigraphischen Timings der PALEOVAN Kerne ist mit dieser Arbeit nachgewiesen. Vergleiche der Proxydaten zu anderen Klimaarchiven deren Auflösung sogar höher als die der Milankovitchzyklen ist (die Auflösung der Dnsgaard-Oeschger Ereignisse), existieren für viele Kerne des PALEOVAN-Archivs. Die Kerne aus dem PALEOVAN Projekt repräsentieren damit ein Schlüsselarchiv für die Rekonstruktion des Klimas im Nahen Osten. Dieses Archiv bietet ein klima-stratigraphisches Altersmodell von bemerkenswerter Genauigkeit und Auflösung.
KW  - Lake Van
KW  - feldspar
KW  - lacustrine record
KW  - volcaniclastics
KW  - 40Ar/39Ar
KW  - Vansee
KW  - Feldspat
KW  - lakustrine Abfolge
KW  - Vulkaniklastika
KW  - 40Ar/39Ar
Y1  - 2018
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-429539
ER  - 
TY  - JOUR
A1  - Krmíček, Lukáš
A1  - Timmerman, Martin Jan
A1  - Ziemann, Martin Andreas
A1  - Sudo, Masafumi
A1  - Ulrych, Jaromir
T1  - 40Ar/39Ar step-heating dating of phlogopite and kaersutite megacrysts from the Železná hůrka (Eisenbühl) Pleistocene scoria cone, Czech Republic
JF  - Geologica Carpathica
N2  - (40)A/Ar-39 step-heating of mica and amphibole megacrysts from hauyne-bearing olivine melilitite scoria/tephra from the Zelezna hurka yielded a 435 +/- 108 ka isotope correlation age for phlogopite and a more imprecise 1.55 Ma total gas age of the kaersutite megacryst. The amphibole megacrysts may constitute the first, and the younger phlogopite megacrysts the later phase of mafic, hydrous melilitic magma crystallization. It cannot be ruled out that the amphibole megacrysts are petrogenetically unrelated to tephra and phlogopite megacrysts and were derived from mantle xenoliths or disaggregated older, deep crustal pegmatites. This is in line both with the rarity of amphibole at Zelezna hurka and with the observed signs of magmatic resorption at the edges of amphibole crystals.
KW  - Bohemian Massif
KW  - Zelezna hurka
KW  - Eisenbuhl
KW  - argon dating
KW  - mica
KW  - amphibole
KW  - melilitite
Y1  - 2020
U6  - https://doi.org/10.31577/GeolCarp.71.4.6
SN  - 1335-0552
SN  - 1336-8052
VL  - 71
IS  - 4
SP  - 382
EP  - 387
PB  - Veda
CY  - Bratislava
ER  - 
TY  - JOUR
A1  - Allroggen, Niklas
A1  - van Schaik, N. Loes M. B.
A1  - Tronicke, Jens
T1  - 4D ground-penetrating radar during a plot scale dye tracer experiment
JF  - Journal of applied geophysics
N2  - Flow phenomena in the unsaturated zone are highly variable in time and space. Thus, it is challenging to measure and monitor such processes under field conditions. Here, we present a new setup and interpretation approach for combining a dye tracer experiment with a 4D ground-penetrating radar (GPR) survey. Therefore, we designed a rainfall experiment during which we measured three surface-based 3D GPR surveys using a pair of 500 MHz antennas. Such a survey setup requires accurate acquisition and processing techniquesto extract time-lapse information supporting the interpretation of selected cross-sections photographed after excavating the site. Our results reveal patterns of traveltime changes in the measured GPR data, which are associated with soil moisture changes. As distinct horizons are present at our site, such changes can be quantified and transferred into changes in total soil moisture content. Our soil moisture estimates are similar to the amount of infiltrated water, which confirms our experimental approach and makes us confident for further developing this strategy, especially, with respect to improving the temporal and spatial resolution. (C) 2015 Elsevier B.V. All rights reserved.
KW  - Ground penetrating radar
KW  - Time-lapse imaging
KW  - Brilliant blue
Y1  - 2015
U6  - https://doi.org/10.1016/j.jappgeo.2015.04.016
SN  - 0926-9851
SN  - 1879-1859
VL  - 118
SP  - 139
EP  - 144
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Zhang, Yang
A1  - Huang, Wentao
A1  - Huang, Baochun
A1  - van Hinsbergen, Douwe J. J.
A1  - Yang, Tao
A1  - Dupont-Nivet, Guillaume
A1  - Guo, Zhaojie
T1  - 53-43Ma Deformation of Eastern Tibet Revealed by Three Stages of Tectonic Rotation in the Gongjue Basin
JF  - Journal of geophysical research : Solid earth
N2  - The Gongjue basin from the eastern Qiangtang terrane is located in the transition region where the regional structural lineation curves from east-west-oriented in Tibet to north-south-oriented in Yunnan. In this study, we sampled the red beds in the basin from the lower Gongjue to upper Ranmugou formations for the first time covering the entire stratigraphic profile. The stratigraphic ages are bracketed within 53-43Ma by new detrital zircon U-Pb ages constraining the maximum deposition age to 52.51.5Ma. Rock magnetic and petrographic studies indicate that detrital magnetite and hematite are the magnetic carriers. Positive reversals and fold tests demonstrate that the characteristic remanent magnetization has a primary origin. The Gongjue and Ranmugou formations yield mean characteristic remanent magnetization directions of D-s/I-s=31.0 degrees/21.3 degrees and D-s/I-s=15.9 degrees/22.0 degrees, respectively. The magnetic inclination of these characteristic remanent magnetizations is significantly shallowed compared to the expected inclination for the locality. However, the elongation/inclination correction method does not provide a meaningful correction, likely because of syn-depositional rotation. Rotations relative to the Eurasian apparent polar wander path occurred in three stages: Stage I, 33.33.4 degrees clockwise rotation during the deposition of the Gongjue and lower Ranmugou formations; Stage II, 26.93.7 degrees counterclockwise rotation during deposition of the lower and middle Ranmugou formation; and Stage III, 17.73.3 degrees clockwise rotation after 43Ma. The complex rotation history recorded in the basin is possibly linked to sinistral shear along the Qiangtang block during India indentation into Asia and the early stage of the extrusion of the northwestern Indochina blocks away from eastern Tibet.
KW  - eastern Qiangtang terrane
KW  - Gongjue basin
KW  - paleomagnetism
KW  - inclination shallowing
KW  - rotation
Y1  - 2018
U6  - https://doi.org/10.1002/2018JB015443
SN  - 2169-9313
SN  - 2169-9356
VL  - 123
IS  - 5
SP  - 3320
EP  - 3338
PB  - American Geophysical Union
CY  - Washington
ER  - 
TY  - JOUR
A1  - Wichura, Henry
A1  - Jacobs, Louis L.
A1  - Lin, Andrew
A1  - Polcyn, Michael J.
A1  - Manthi, Fredrick K.
A1  - Winkler, Dale A.
A1  - Strecker, Manfred
A1  - Clemens, Matthew
T1  - A 17-My-old whale constrains onset of uplift and climate change in east Africa
JF  - Proceedings of the National Academy of Sciences of the United States of America
N2  - Timing and magnitude of surface uplift are key to understanding the impact of crustal deformation and topographic growth on atmospheric circulation, environmental conditions, and surface processes. Uplift of the East African Plateau is linked to mantle processes, but paleoaltimetry data are too scarce to constrain plateau evolution and subsequent vertical motions associated with rifting. Here, we assess the paleotopographic implications of a beaked whale fossil (Ziphiidae) from the Turkana region of Kenya found 740 km inland from the present-day coastline of the Indian Ocean at an elevation of 620 m. The specimen is similar to 17 My old and represents the oldest derived beaked whale known, consistent with molecular estimates of the emergence of modern straptoothed whales (Mesoplodon). The whale traveled from the Indian Ocean inland along an eastward-directed drainage system controlled by the Cretaceous Anza Graben and was stranded slightly above sea level. Surface uplift from near sea level coincides with paleoclimatic change from a humid environment to highly variable and much drier conditions, which altered biotic communities and drove evolution in east Africa, including that of primates.
KW  - east Africa
KW  - Ziphiidae
KW  - uplift
KW  - drainage
KW  - paleoenvironment
Y1  - 2015
U6  - https://doi.org/10.1073/pnas.1421502112
SN  - 0027-8424
VL  - 112
IS  - 13
SP  - 3910
EP  - 3915
PB  - National Acad. of Sciences
CY  - Washington
ER  - 
TY  - JOUR
A1  - Balagansky, V. V.
A1  - Timmerman, Martin Jan
A1  - Kozlova, N. Ye.
A1  - Kisilitsyn, R. V.
T1  - A 2.44 Ga old mafic dyke swarm in the Kolvitsa Belt, Kola Peninsula, Russia: implications for the early Palaeoproterozoic tectonics in the north-eastern Fennoscandian Shield
Y1  - 2001
ER  - 
TY  - JOUR
A1  - Freybourger, Marion
A1  - Krüger, Frank
A1  - Achauer, Ulrich
T1  - A 22 degree long seismic profile for the study of the top D"
Y1  - 1999
ER  - 
TY  - JOUR
A1  - Weidle, Christian
A1  - Wiesenberg, Lars
A1  - El-Sharkawy, Amr
A1  - Krüger, Frank
A1  - Scharf, Andreas
A1  - Agard, Philippe
A1  - Meier, Thomas
T1  - A 3-D crustal shear wave velocity model and Moho map below the Semail Ophiolite, eastern Arabia
JF  - Geophysical journal international
N2  - The Semail Ophiolite in eastern Arabia is the largest and best-exposed slice of oceanic lithosphere on land. Detailed knowledge of the tectonic evolution of the shallow crust, in particular during and after ophiolite obduction in Late Cretaceous times is contrasted by few constraints on physical and compositional properties of the middle and lower continental crust below the obducted units. The role of inherited, pre-obduction crustal architecture remains therefore unaccounted for in our understanding of crustal evolution and the present-day geology. Based on seismological data acquired during a 27-month campaign in northern Oman, Ambient Seismic Noise Tomography and Receiver Function analysis provide for the first time a 3-D radially anisotropic shear wave velocity (V-S) model and a consistent Moho map below the iconic Semail Ophiolite. The model highlights deep crustal boundaries that segment the eastern Arabian basement in two distinct units. The previously undescribed Western Jabal Akhdar Zone separates Arabian crust with typical continental properties and a thickness of similar to 40-45 km in the northwest from a compositionally different terrane in the southeast that is interpreted as a terrane accreted during the Pan-African orogeny in Neoproterozoic times. East of the Ibra Zone, another deep crustal boundary, crustal thickness decreases to 30-35 km and very high lower crustal V-S suggest large-scale mafic intrusions into, and possible underplating of the Arabian continental crust that occurred most likely during Permian breakup of Pangea. Mafic reworking is sharply bounded by the (upper crustal) Semail Gap Fault Zone, northwest of which no such high velocities are found in the crust. Topography of the Oman Mountains is supported by a mild crustal root and Moho depth below the highest topography, the Jabal Akhdar Dome, is similar to 42 km. Radial anisotropy is robustly resolved in the upper crust and aids in discriminating dipping allochthonous units from autochthonous sedimentary rocks that are indistinguishable by isotropic V-S alone. Lateral thickness variations of the ophiolite highlight the Haylayn Ophiolite Massif on the northern flank of Jabal Akhdar Dome and the Hawasina Window as the deepest reaching unit. Ophiolite thickness is similar to 10 km in the southern and northern massifs, and <= 5 km elsewhere.
KW  - Composition and structure of the continental crust
KW  - Asia
KW  - Body waves
KW  - Seismic anisotropy
KW  - Seismic tomography
KW  - Surface waves and free oscillations
Y1  - 2022
U6  - https://doi.org/10.1093/gji/ggac223
SN  - 0956-540X
SN  - 1365-246X
VL  - 231
IS  - 2
SP  - 817
EP  - 834
PB  - Oxford University Press
CY  - Oxford
ER  - 
TY  - THES
A1  - Swierczynski, Tina
T1  - A 7000 yr runoff chronology from varved sediments of Lake Mondsee (Upper Austria)
T1  - Eine 7000-jährige Abflusschronologie anhand von warvierten Sedimenten des Mondsees (Oberösterreich)
N2  - The potential increase in frequency and magnitude of extreme floods is currently discussed in terms of global warming and the intensification of the hydrological cycle. The profound knowledge of past natural variability of floods is of utmost importance in order to assess flood risk for the future. Since instrumental flood series cover only the last ~150 years, other approaches to reconstruct historical and pre-historical flood events are needed. Annually laminated (varved) lake sediments are meaningful natural geoarchives because they provide continuous records of environmental changes > 10000 years down to a seasonal resolution. Since lake basins additionally act as natural sediment traps, the riverine sediment supply, which is preserved as detrital event layers in the lake sediments, can be used as a proxy for extreme discharge events. Within my thesis I examined a ~ 8.50 m long sedimentary record from the pre-Alpine Lake Mondsee (Northeast European Alps), which covered the last 7000 years. This sediment record consists of calcite varves and intercalated detrital layers, which range in thickness from 0.05 to 32 mm. Detrital layer deposition was analysed by a combined method of microfacies analysis via thin sections, Scanning Electron Microscopy (SEM), μX-ray fluorescence (μXRF) scanning and magnetic susceptibility. This approach allows characterizing individual detrital event layers and assigning a corresponding input mechanism and catchment. Based on varve counting and controlled by 14C age dates, the main goals of this thesis are (i) to identify seasonal runoff processes, which lead to significant sediment supply from the catchment into the lake basin and (ii) to investigate flood frequency under changing climate boundary conditions. This thesis follows a line of different time slices, presenting an integrative approach linking instrumental and historical flood data from Lake Mondsee in order to evaluate the flood record inferred from Lake Mondsee sediments. The investigation of eleven short cores covering the last 100 years reveals the abundance of 12 detrital layers. Therein, two types of detrital layers are distinguished by grain size, geochemical composition and distribution pattern within the lake basin. Detrital layers, which are enriched in siliciclastic and dolomitic material, reveal sediment supply from the Flysch sediments and Northern Calcareous Alps into the lake basin. These layers are thicker in the northern lake basin (0.1-3.9 mm) and thinner in the southern lake basin (0.05-1.6 mm). Detrital layers, which are enriched in dolomitic components forming graded detrital layers (turbidites), indicate the provenance from the Northern Calcareous Alps. These layers are generally thicker (0.65-32 mm) and are solely recorded within the southern lake basin. In comparison with instrumental data, thicker graded layers result from local debris flow events in summer, whereas thin layers are deposited during regional flood events in spring/summer. Extreme summer floods as reported from flood layer deposition are principally caused by cyclonic activity from the Mediterranean Sea, e.g. July 1954, July 1997 and August 2002. During the last two millennia, Lake Mondsee sediments reveal two significant flood intervals with decadal-scale flood episodes, during the Dark Ages Cold Period (DACP) and the transition from the Medieval Climate Anomaly (MCA) into the Little Ice Age (LIA) suggesting a linkage of transition to climate cooling and summer flood recurrences in the Northeastern Alps. In contrast, intermediate or decreased flood episodes appeared during the MWP and the LIA. This indicates a non-straightforward relationship between temperature and flood recurrence, suggesting higher cyclonic activity during climate transition in the Northeast Alps. The 7000-year flood chronology reveals 47 debris flows and 269 floods, with increased flood activity shifting around 3500 and 1500 varve yr BP (varve yr BP = varve years before present, before present = AD 1950). This significant increase in flood activity shows a coincidence with millennial-scale climate cooling that is reported from main Alpine glacier advances and lower tree lines in the European Alps since about 3300 cal. yr BP (calibrated years before present). Despite relatively low flood occurrence prior to 1500 varve yr BP, floods at Lake Mondsee could have also influenced human life in early Neolithic lake dwellings (5750-4750 cal. yr BP). While the first lake dwellings were constructed on wetlands, the later lake dwellings were built on piles in the water suggesting an early flood risk adaptation of humans and/or a general change of the Late Neolithic Culture of lake-dwellers because of socio-economic reasons. However, a direct relationship between the final abandonment of the lake dwellings and higher flood frequencies is not evidenced.
N2  - Ein verstärktes Auftreten von Hochwassern, sowohl in ihrer Häufigkeit als auch in ihrer Frequenz, wird im Zuge der Klimaerwärmung und einer möglichen Intensivierung des hydrologischen Kreislaufs diskutiert. Die Kenntnis über die natürliche Variabilität von Hochwasserereignissen ist dabei eine grundlegende Voraussetzung, um die Hochwassergefahr für die Zukunft abschätzen zu können. Da instrumentelle Hochwasserzeitreihen meist nur die letzten 150 Jahre abbilden sind andere Methoden erforderlich, um das Auftreten von historischen und prä-historischen Hochwassern festzustellen. Jährlich laminierte (warvierte) Seesedimente sind bedeutende natürliche Archive, denn sie liefern kontinuierliche Zeitreihen > 10000 Jahre mit einer bis zur saisonalen Auflösung. Seebecken stellen natürliche Sedimentfallen dar, wobei eingetragenes Flusssediment in den Seesedimenten als eine distinkte detritische Lage aufgezeichnet wird, und daher zur Rekonstruktion von extremen Abflussereignissen genutzt werden. Im Rahmen meiner Doktorarbeit habe ich einen 8.50 m langen Sedimentkern aus dem Mondsee (Nordostalpen) untersucht, welcher die letzten 7000 Jahre abdeckt. Dieser Sedimentkern besteht aus Kalzitwarven und eingeschalteten detritischen Lagen mit einer Mächtigkeit von 0.05-32 mm. Detritische Lagen wurden mit Hilfe einer kombinierten Methode untersucht: Mikrofaziesanalyse, Rasterelektronenmikroskopie, Röntgenfluoreszenzanalyse (µXRF) und magnetische Suszeptibilität. Dieser Ansatz ermöglicht die Charakterisierung der einzelnen detritischen Lagen bezüglich der Eintragsprozesse und die Lokalisierung des Einzugsgebietes. Auf Grundlage der Warvenzählung und 14C Datierungen sind die wichtigsten Ziele dieser Arbeit: (i) die Identifizierung der Eintragsprozesse, welche zu einem Sedimenteintrag vom Einzugsgebiet bis in den See führen und (ii) die Rekonstruktion der Hochwasserfrequenz unter veränderten Klimabedingungen. Diese Arbeit zeigt eine Untersuchung auf verschiedenen Zeitscheiben, wobei instrumentelle und historische Daten genutzt werden, um die Aufzeichnung von pre-historischen Hochwasser in den Mondseesedimenten besser zu verstehen. Innerhalb der letzten 100 Jahre wurden zwölf Abflussereignisse aufgezeichnet. Zwei Typen von detritschen Lagen können anhand von Korngröße, geochemischer Zusammensetzung und des Verteilungsmusters unterschieden werden. Detritische Lagen, welche aus siliziklastischen und dolomitischen Material bestehen, zeigen eine Sedimentherkunft vom Teileinzugsgebiet des Flysch (nördliches Einzugsgebiet) und der Nördlichen Kalkalpen (südliches Teileinzugsgebiet) auf. Diese Lagen sind im Nördlichen Becken mächtiger (0.1-3.9 mm) als im südlichen Seebecken (0.05-1.6 mm). Detritische Lagen, welche nur aus dolomitischem Material bestehen und Turbititlagen aufzeigen (0.65-32 mm), weisen auf eine Herkunft aus den Nördlichen Kalkalpen hin. Im Vergleich mit instrumentellen Zeitreihen, stammen die mächtigeren Lagen von lokalen Murereignissen im Sommer und feinere Eintragslagen von regionalen Frühjahrs- und Sommerhochwassern. Extreme Sommerhochwasser am Mondsee werden hauptsächlich durch Zyklonen vom Mittelmeer ausgelöst, z.B. Juli 1954, Juli 1997 und August 2002. Die Untersuchung des langen Sedimentkerns vom Mondsee zeigt während der letzten 2000 Jahre signifikante Hochwasserintervalle mit dekadischen Hochwasserepisoden während der Völkerwanderungszeit und im Übergang vom Mittelalter in die Kleine Eiszeit. Dies weist auf eine Verknüpfung von Abkühlungsphasen und Sommerhochwassern im Nordostalpenraum hin. Während der Mittelalterlichen Wärmephase und in der Kleinen Eiszeit kam es jedoch zu einer geringeren Hochwasseraktivität. Dies zeigt einen komplexen Zusammenhang von Temperaturentwicklung und Hochwasseraktivität in den Nordostalpen, mit einer erhöhten Zyklonenaktivät in den Übergängen von wärmeren zu kälteren Phasen. Während der letzten 7000 Jahre wurden 47 Muren und 269 Hochwasser aufgezeichnet, wobei es eine signifikante Änderung mit erhöhter Häufigkeit um 3500 und 1500 Warvenjahre v. h. gab (v.h. = vor heute = AD 1950). Diese signifikante Änderung stimmt mit einem langfristigem Abkühlungstrend überein, welcher durch alpine Gletschervorstöße und das Absinken von Baumgrenzen seit etwa 3300 Warvenjahre v.h. berichtet wird. Trotz relativ geringer Hochwasseraktivität um 1500 Warvenjahre v.h., könnte das Auftreten von Hochwasser auch das Leben Menschen in Neolithischen Pfahlbausiedlungen (5750-4750 cal. yr BP) beeinflusst haben. Während die ersten Pfahlbauten noch als Feuchtbodensiedlungen am Land entstanden, wurden spätere Siedlungen eventuell als Anpassung an stark schwankenden Seewasserspiegeln auf Pfählen im Wasser gebaut und/oder zeigen eine allgemeine Veränderung der Siedlungsaktivitäten der Neolithischen Pfahlbaukultur an, aufgrund sozio-ökonomischer Veränderungen. Ein direkter Zusammenhang zwischen dem Verlassen der Pfahlbausiedlungen und einer erhöhten Hochwasseraktivität konnte jedoch nicht festgestellt werden.
KW  - Mondsee
KW  - Paläohochwasser
KW  - Seesedimente
KW  - Warven
KW  - Klimarekonstruktion
KW  - Mondsee
KW  - Paleofloods
KW  - Lake sediments
KW  - Warves
KW  - Climate reconstruction
Y1  - 2012
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-66702
ER  - 
TY  - JOUR
A1  - Lappe, Michael
A1  - Kallmeyer, Jens
T1  - A cell extraction method for oily sediments
JF  - Frontiers in microbiology
N2  - Hydrocarbons can be found in many different habitats and represent an important carbon source for microbes. As fossil fuels, they are also an important economical resource and through natural seepage or accidental release they can be major pollutants. DNA-specific stains and molecular probes bind to hydrocarbons, causing massive background fluorescence, thereby hampering cell enumeration. The cell extraction procedure of Kallmeyer et al. (2008) separates the cells from the sediment matrix. In principle, this technique can also be used to separate cells from oily sediments, but it was not originally optimized for this application. Here we present a modified extraction method in which the hydrocarbons are removed prior to cell extraction. Due to the reduced background fluorescence the microscopic image becomes clearer, making cell identification, and enumeration much easier. Consequently, the resulting cell counts from oily samples treated according to our new protocol are significantly higher than those treated according to Kallmeyer et al. (2008). We tested different amounts of a variety of solvents for their ability to remove hydrocarbons and found that n-hexane and in samples containing more mature oils methanol, delivered the best results. However, as solvents also tend to lyse cells, it was important to find the optimum solvent to sample ratio, at which hydrocarbon extraction is maximized and cell lysis minimized. A volumetric ratio of 1:2-1:5 between a formalin-fixed sediment slurry and solvent delivered highest cell counts. Extraction efficiency was around 30-50% and was checked on both oily samples spiked with known amounts of E. coli cells and oil-free samples amended with fresh and biodegraded oil. The method provided reproducible results on samples containing very different kinds of oils with regard to their degree of biodegradation. For strongly biodegraded oil MeOH turned out to be the most appropriate solvent, whereas for less biodegraded samples n-hexane delivered best results.
KW  - cell enumeration
KW  - hydrocarbons
KW  - cell separation
KW  - subsurface microbiology
Y1  - 2011
U6  - https://doi.org/10.3389/fmicb.2011.00233
SN  - 1664-302X
VL  - 2
PB  - Frontiers Research Foundation
CY  - Lausanne
ER  - 
TY  - JOUR
A1  - Maslin, Mark
A1  - Trauth, Martin H.
A1  - Christensen, B.
T1  - A changing climate for human evolution
Y1  - 2005
SN  - 0016-8556
ER  - 
TY  - JOUR
A1  - Salazar, S.
A1  - Frances, F.
A1  - Komma, J.
A1  - Blume, Theresa
A1  - Francke, Till
A1  - Bronstert, Axel
A1  - Blöschl, Günter
T1  - A comparative analysis of the effectiveness of flood management measures based on the concept of "retaining water in the landscape" in different European hydro-climatic regions
JF  - Natural hazards and earth system sciences
N2  - In this paper, we analyse the effectiveness of flood management measures based on the concept known as "retaining water in the landscape". The investigated measures include afforestation, micro-ponds and small-reservoirs. A comparative and model-based methodological approach has been developed and applied for three meso-scale catchments located in different European hydro-climatological regions: Poyo (184 km(2)) in the Spanish Mediterranean, Upper Iller (954 km(2)) in the German Alps and Kamp (621 km(2)) in Northeast-Austria representing the Continental hydro-climate. This comparative analysis has found general similarities in spite of the particular differences among studied areas. In general terms, the flood reduction through the concept of "retaining water in the landscape" depends on the following factors: the storage capacity increase in the catchment resulting from such measures, the characteristics of the rainfall event, the antecedent soil moisture condition and the spatial distribution of such flood management measures in the catchment. In general, our study has shown that, this concept is effective for small and medium events, but almost negligible for the largest and less frequent floods: this holds true for all different hydro-climatic regions, and with different land-use, soils and morphological settings.
Y1  - 2012
U6  - https://doi.org/10.5194/nhess-12-3287-2012
SN  - 1561-8633
VL  - 12
IS  - 11
SP  - 3287
EP  - 3306
PB  - Copernicus
CY  - Göttingen
ER  - 
TY  - JOUR
A1  - van zanten, Boris T.
A1  - Zasada, Ingo
A1  - Koetse, Mark J.
A1  - Ungaro, Fabrizio
A1  - Hafner, Kati
A1  - Verburg, Peter H.
T1  - A comparative approach to assess the contribution of landscape features to aesthetic and recreational values in agricultural landscapes
JF  - Ecosystem Services : Science, Policy and Practice
N2  - The importance of cultural ecosystem services in agricultural landscapes is increasingly recognized as agricultural scale enlargement and abandonment affect aesthetic and recreational values of agricultural landscapes. Landscape preference studies addressing these type of values often yield context-specific outcomes, limiting the applicability of their outcomes in landscape policy. Our approach measures the relative importance of landscape features across agricultural landscapes. This approach was applied in the agricultural landscapes of Winterswijk, The Netherlands (n=191) and the Markische Schweiz, Germany (n=113) among visitors in the agricultural landscape. We set up a parallel designed choice experiment, using regionally specific, photorealistic visualizations of four comparable landscape attributes. In the Dutch landscape visitors highly value hedgerows and tree lines, whereas groups of trees and crop diversity are highly valued in the German landscape. Furthermore, we find that differences in relative preference for landscape attributes are, to some extent, explained by socio-cultural background variables such as education level and affinity with agriculture of the visitors. This approach contributes to a better understanding of the cross-regional variation of aesthetic and recreational values and how these values relate to characteristics of the agricultural landscape, which could support the integration of cultural services in landscape policy. (C) 2015 Elsevier B.V. All rights reserved.
KW  - Cultural ecosystem services
KW  - Landscape preferences
KW  - Comparative study
KW  - Landscape aesthetics
KW  - Landscape values
KW  - Agricultural landscape
Y1  - 2016
U6  - https://doi.org/10.1016/j.ecoser.2015.11.011
SN  - 2212-0416
VL  - 17
SP  - 87
EP  - 98
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Spekkers, Matthieu
A1  - Roezer, Viktor
A1  - Thieken, Annegret
A1  - ten Veldhuis, Marie-Claire
A1  - Kreibich, Heidi
T1  - A comparative survey of the impacts of extreme rainfall in two international case studies
JF  - Natural hazards and earth system sciences
Y1  - 2017
U6  - https://doi.org/10.5194/nhess-17-1337-2017
SN  - 1561-8633
VL  - 17
SP  - 1337
EP  - 1355
PB  - Copernicus
CY  - Göttingen
ER  - 
TY  - JOUR
A1  - Hudson, Paul
T1  - A comparison of definitions of affordability for flood risk adaption measures
BT  - a case study of current and future risk-based flood insurance premiums in Europe
JF  - Mitigation and adaptation strategies for global change : an international journal devoted to scientific, engineering, socio-economic and policy responses to environmental change
N2  - Risk-based insurance is a commonly proposed and discussed flood risk adaptation mechanism in policy debates across the world such as in the United Kingdom and the United States of America. However, both risk-based premiums and growing risk pose increasing difficulties for insurance to remain affordable. An empirical concept of affordability is required as the affordability of adaption strategies is an important concern for policymakers, yet such a concept is not often examined. Therefore, a robust metric with a commonly acceptable affordability threshold is required. A robust metric allows for a previously normative concept to be quantified in monetary terms, and in this way, the metric is rendered more suitable for integration into public policy debates. This paper investigates the degree to which risk-based flood insurance premiums are unaffordable in Europe. In addition, this paper compares the outcomes generated by three different definitions of unaffordability in order to investigate the most robust definition. In doing so, the residual income definition was found to be the least sensitive to changes in the threshold. While this paper focuses on Europe, the selected definition can be employed elsewhere in the world and across adaption measures in order to develop a common metric for indicating the potential unaffordability problem.
KW  - Flood risk
KW  - Insurance
KW  - Affordability
KW  - Climate change
KW  - Adaptation
KW  - Public policy
Y1  - 2018
U6  - https://doi.org/10.1007/s11027-017-9769-5
SN  - 1381-2386
SN  - 1573-1596
VL  - 23
IS  - 7
SP  - 1019
EP  - 1038
PB  - Springer
CY  - Dordrecht
ER  - 
TY  - JOUR
A1  - Samprogna Mohor, Guilherme
A1  - Hudson, Paul
A1  - Thieken, Annegret
T1  - A comparison of factors driving flood losses in households affected by different flood types
JF  - Water resources research
N2  - Flood loss data collection and modeling are not standardized, and previous work has indicated that losses from different flood types (e.g., riverine and groundwater) may follow different driving forces. However, different flood types may occur within a single flood event, which is known as a compound flood event. Therefore, we aimed to identify statistical similarities between loss-driving factors across flood types and test whether the corresponding losses should be modeled separately. In this study, we used empirical data from 4,418 respondents from four survey campaigns studying households in Germany that experienced flooding. These surveys sought to investigate several features of the impact process (hazard, socioeconomic, preparedness, and building characteristics, as well as flood type). While the level of most of these features differed across flood type subsamples (e.g., degree of preparedness), they did so in a nonregular pattern. A variable selection process indicates that besides hazard and building characteristics, information on property-level preparedness was also selected as a relevant predictor of the loss ratio. These variables represent information, which is rarely adopted in loss modeling. Models shall be refined with further data collection and other statistical methods. To save costs, data collection efforts should be steered toward the most relevant predictors to enhance data availability and increase the statistical power of results. Understanding that losses from different flood types are driven by different factors is a crucial step toward targeted data collection and model development and will finally clarify conditions that allow us to transfer loss models in space and time. <br /> Key Points <br /> Survey data of flood-affected households show different concurrent flood types, undermining the use of a single-flood-type loss model Thirteen variables addressing flood hazard, the building, and property level preparedness are significant predictors of the building loss ratio Flood type-specific models show varying significance across the predictor variables, indicating a hindrance to model transferability
KW  - Loss modeling
KW  - Riverine floods
KW  - Surface floods
KW  - Groundwater
KW  - Levee
KW  - breaches
KW  - Compound flood event
Y1  - 2020
U6  - https://doi.org/10.1029/2019WR025943
SN  - 0043-1397
SN  - 1944-7973
VL  - 56
IS  - 4
PB  - American Geophysical Union
CY  - Washington
ER  - 
TY  - JOUR
A1  - Forbrich, Inke
A1  - Kutzbach, Lars
A1  - Hormann, Annabell
A1  - Wilmking, Martin
T1  - A comparison of linear and exponential regression for estimating diffusive CH4 fluxes by closed-chambers in peatlands
N2  - The closed-chamber method is the most common approach to determine CH4 fluxes in peatlands. The concentration change in the chamber is monitored over time, and the flux is usually calculated by the slope of a linear regression function. Theoretically, the gas exchange cannot be constant over time but has to decrease, when the concentration gradient between chamber headspace and soil air decreases. In this study, we test whether we can detect this non- linearity in the concentration change during the chamber closure with six air samples. We expect generally a low concentration gradient on dry sites (hummocks) and thus the occurrence of exponential concentration changes in the chamber due to a quick equilibrium of gas concentrations between peat and chamber headspace. On wet (flarks) and sedge- covered sites (lawns), we expect a high gradient and near-linear concentration changes in the chamber. To evaluate these model assumptions, we calculate both linear and exponential regressions for a test data set (n = 597) from a Finnish mire. We use the Akaike Information Criterion with small sample second order bias correction to select the best-fitted model. 13.6%, 19.2% and 9.8% of measurements on hummocks, lawns and flarks, respectively, were best fitted with an exponential regression model. A flux estimation derived from the slope of the exponential function at the beginning of the chamber closure can be significantly higher than using the slope of the linear regression function. Non-linear concentration-overtime curves occurred mostly during periods of changing water table. This could be due to either natural processes or chamber artefacts, e.g. initial pressure fluctuations during chamber deployment. To be able to exclude either natural processes or artefacts as cause of non-linearity, further information, e.g. CH4 concentration profile measurements in the peat, would be needed. If this is not available, the range of uncertainty can be substantial. We suggest to use the range between the slopes of the exponential regression at the beginning and at the end of the closure time as an estimate of the overall uncertainty.
Y1  - 2010
UR  - http://www.sciencedirect.com/science/journal/00380717
U6  - https://doi.org/10.1016/j.soilbio.2009.12.004
SN  - 0038-0717
ER  - 
TY  - THES
A1  - Pilz, Marco
T1  - A comparison of proxies for seismic site conditions and amplification for the large urban area of Santiago de Chile
T1  - Ein Vergleich seismischer Parameter für die Standort- und Verstärkungsabschätzung im Stadtgebiet von Santiago de Chile
N2  - Situated in an active tectonic region, Santiago de Chile, the country´s capital with more than six million inhabitants, faces tremendous earthquake hazard. Macroseismic data for the 1985 Valparaiso and the 2010 Maule events show large variations in the distribution of damage to buildings within short distances indicating strong influence of local sediments and the shape of the sediment-bedrock interface on ground motion. Therefore, a temporary seismic network was installed in the urban area for recording earthquake activity, and a study was carried out aiming to estimate site amplification derived from earthquake data and ambient noise. The analysis of earthquake data shows significant dependence on the local geological structure with regards to amplitude and duration. Moreover, the analysis of noise spectral ratios shows that they can provide a lower bound in amplitude for site amplification and, since no variability in terms of time and amplitude is observed, that it is possible to map the fundamental resonance frequency of the soil for a 26 km x 12 km area in the northern part of the Santiago de Chile basin. By inverting the noise spectral rations, local shear wave velocity profiles could be derived under the constraint of the thickness of the sedimentary cover which had previously been determined by gravimetric measurements. The resulting 3D model was derived by interpolation between the single shear wave velocity profiles and shows locally good agreement with the few existing velocity profile data, but allows the entire area, as well as deeper parts of the basin, to be represented in greater detail. The wealth of available data allowed further to check if any correlation between the shear wave velocity in the uppermost 30 m (vs30) and the slope of topography, a new technique recently proposed by Wald and Allen (2007), exists on a local scale. While one lithology might provide a greater scatter in the velocity values for the investigated area, almost no correlation between topographic gradient and calculated vs30 exists, whereas a better link is found between vs30 and the local geology. When comparing the vs30 distribution with the MSK intensities for the 1985 Valparaiso event it becomes clear that high intensities are found where the expected vs30 values are low and over a thick sedimentary cover. Although this evidence cannot be generalized for all possible earthquakes, it indicates the influence of site effects modifying the ground motion when earthquakes occur well outside of the Santiago basin. Using the attained knowledge on the basin characteristics, simulations of strong ground motion within the Santiago Metropolitan area were carried out by means of the spectral element technique. The simulation of a regional event, which has also been recorded by a dense network installed in the city of Santiago for recording aftershock activity following the 27 February 2010 Maule earthquake, shows that the model is capable to realistically calculate ground motion in terms of amplitude, duration, and frequency and, moreover, that the surface topography and the shape of the sediment bedrock interface strongly modify ground motion in the Santiago basin. An examination on the dependency of ground motion on the hypocenter location for a hypothetical event occurring along the active San Ramón fault, which is crossing the eastern outskirts of the city, shows that the unfavorable interaction between fault rupture, radiation mechanism, and complex geological conditions in the near-field may give rise to large values of peak ground velocity and therefore considerably increase the level of seismic risk for Santiago de Chile.
N2  - Aufgrund ihrer Lage in einem tektonisch aktiven Gebiet ist Santiago de Chile, die Hauptstadt des Landes mit mehr als sechs Millionen Einwohnern, einer großen Erdbebengefährdung ausgesetzt. Darüberhinaus zeigen makroseismische Daten für das 1985 Valparaiso- und das 2010 Maule-Erdbeben eine räumlich unterschiedliche Verteilung der an den Gebäuden festgestellten Schäden; dies weist auf einen starken Einfluss der unterliegenden Sedimentschichten und der Gestalt der Grenzfläche zwischen den Sedimenten und dem Festgestein auf die Bodenbewegung hin. Zu diesem Zweck wurde in der Stadt ein seismisches Netzwerk für die Aufzeichnung der Bodenbewegung installiert, um die auftretende Untergrundverstärkung mittels Erdbebendaten und seismischem Rauschen abzuschätzen. Dabei zeigt sich für die Erdbebendaten eine deutliche Abhängigkeit von der Struktur des Untergrunds hinsichtlich der Amplitude der Erschütterung und ihrer Dauer. Die Untersuchung der aus seismischem Rauschen gewonnenen horizontal-zu-vertikal-(H/V) Spektral-verhältnisse zeigt, dass diese Ergebnisse nur einen unteren Grenzwert für die Bodenverstärkung liefern können. Weil jedoch andererseits keine zeitliche Veränderung bei der Gestalt dieser Spektralverhältnisse festgestellt werden konnte, erlauben die Ergebnisse ferner, die Resonanzfrequenz des Untergrundes für ein 26 km x 12 km großes Gebiet im Nordteil der Stadt zu bestimmen. Unter Zuhilfenahme von Informationen über die Dicke der Sedimentschichten, welche im vorhinein schon durch gravimetrische Messungen bestimmt worden war, konnten nach Inversion der H/V-Spektralverhältnisse lokale Scherwellengeschwindigkeitsprofile und nach Interpolation zwischen den einzelnen Profilen ein dreidimensionales Modell berechnet werden. Darüberhinaus wurde mit den verfügbaren Daten untersucht, ob auf lokaler Ebene ein Zusammenhang zwischen der mittleren Scherwellengeschwindigkeit in den obersten 30 m (vs30) und dem Gefälle existiert, ein Verfahren, welches kürzlich von Wald und Allen (2007) vorgestellt wurde. Da für jede lithologische Einheit eine starke Streuung für die seismischen Geschwindigkeiten gefunden wurde, konnte kein Zusammenhang zwischen dem Gefälle und vs30 hergestellt werden; demgegenüber besteht zumindest ein tendenzieller Zusammenhang zwischen vs30 und der unterliegenden Geologie. Ein Vergleich der Verteilung von vs30 mit den MKS-Intensitäten für das 1985 Valparaiso-Erdbeben in Santiago zeigt, dass hohe Intensitätswerte vor allem in Bereichen geringer vs30-Werte und dicker Sedimentschichten auftraten. Weiterhin ermöglichte die Kenntnis über das Sedimentbeckens Simulationen der Bodenbewegung mittels eines spektralen-Elemente-Verfahrens. Die Simulation eines regionalen Erdbebens, welches auch von einem dichten seismischen Netzwerk aufgezeichnet wurde, das im Stadtgebiet von Santiago infolge des Maule-Erdbebens am 27. Februar 2010 installiert wurde, zeigt, dass das Modell des Sedimentbeckens realistische Berechnungen hinsichtlich Amplitude, Dauer und Frequenz erlaubt und die ausgeprägte Topographie in Verbindung mit der Form der Grenzfläche zwischen den Sedimenten und dem Festgestein starken Einfluss auf die Bodenbewegung haben. Weitere Untersuchungen zur Abhängigkeit der Bodenerschütterung von der Position des Hypozentrums für ein hypothetisches Erdbeben an der San Ramón-Verwerfung, welche die östlichen Vororte der Stadt kreuzt, zeigen, dass die ungünstige Wechselwirkung zwischen dem Verlauf des Bruchs, der Abstrahlung der Energie und der komplexen geologischen Gegebenheiten hohe Werte bei der maximalen Bodengeschwindigkeit erzeugen kann. Dies führt zu einer signifikanten Zunahme des seismischen Risikos für Santiago de Chile.
KW  - Standorteffekte
KW  - seismisches Rauschen
KW  - Sedimentbecken
KW  - Simulation
KW  - site effects
KW  - seismic noise
KW  - sedimentary basin
KW  - simulation
Y1  - 2010
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-52961
ER  - 
TY  - JOUR
A1  - Pilz, Marco
A1  - Parolai, Stefano
A1  - Leyton, Felipe
A1  - Campos, Jaime
A1  - Zschau, Jochen
T1  - A comparison of site response techniques using earthquake data and ambient seismic noise analysis in the large urban areas of Santiago de Chile
N2  - Situated in an active tectonic region, Santiago de Chile, the country's capital with more than six million inhabitants, faces tremendous earthquake risk. Macroseismic data for the 1985 Valparaiso event show large variations in the distribution of damage to buildings within short distances, indicating strong effects of local sediments on ground motion. Therefore, a temporary seismic network was installed in the urban area for recording earthquake activity and a study was carried out aiming to estimate site amplification derived from horizontal-to- vertical (H/V) spectral ratios from earthquake data (EHV) and ambient noise (NHV), as well as using the standard spectral ratio (SSR) technique with a nearby reference station located on igneous rock. The results lead to the following conclusions: The analysis of earthquake data shows significant dependence on the local geological structure with respect to amplitude and duration. An amplification of ground motion at frequencies higher than the fundamental one can be found. This amplification would not be found when looking at NHV ratios alone. The analysis of NHV spectral ratios shows that they can only provide a lower bound in amplitude for site amplification. P-wave site responses always show lower amplitudes than those derived by S waves, and sometimes even fail to provide some frequencies of amplification. No variability in terms of time and amplitude is observed in the analysis of the H/V ratio of noise. Due to the geological conditions in some parts of the investigated area, the fundamental resonance frequency of a site is difficult to estimate following standard criteria proposed by the SESAME consortium, suggesting that these are too restrictive under certain circumstances.
Y1  - 2009
UR  - http://onlinelibrary.wiley.com/journal/10.1111/(ISSN)1365-246X
U6  - https://doi.org/10.1111/j.1365-246X.2009.04195.x
SN  - 0956-540X
ER  - 
TY  - JOUR
A1  - Boers, Niklas
A1  - Goswami, Bedartha
A1  - Ghil, Michael
T1  - A complete representation of uncertainties in layer-counted paleoclimatic archives
JF  - Climate of the past : an interactive open access journal of the European Geosciences Union
N2  - Accurate time series representation of paleoclimatic proxy records is challenging because such records involve dating errors in addition to proxy measurement errors. Rigorous attention is rarely given to age uncertainties in paleoclimatic research, although the latter can severely bias the results of proxy record analysis. Here, we introduce a Bayesian approach to represent layer-counted proxy records - such as ice cores, sediments, corals, or tree rings - as sequences of probability distributions on absolute, error-free time axes. The method accounts for both proxy measurement errors and uncertainties arising from layer-counting-based dating of the records. An application to oxygen isotope ratios from the North Greenland Ice Core Project (NGRIP) record reveals that the counting errors, although seemingly small, lead to substantial uncertainties in the final representation of the oxygen isotope ratios. In particular, for the older parts of the NGRIP record, our results show that the total uncertainty originating from dating errors has been seriously underestimated. Our method is next applied to deriving the overall uncertainties of the Suigetsu radiocarbon comparison curve, which was recently obtained from varved sediment cores at Lake Suigetsu, Japan. This curve provides the only terrestrial radiocarbon comparison for the time interval 12.5-52.8 kyr BP. The uncertainties derived here can be readily employed to obtain complete error estimates for arbitrary radiometrically dated proxy records of this recent part of the last glacial interval.
Y1  - 2017
U6  - https://doi.org/10.5194/cp-13-1169-2017
SN  - 1814-9324
SN  - 1814-9332
VL  - 13
PB  - Copernicus
CY  - Göttingen
ER  -