TY - JOUR A1 - Wade, Jessica A1 - Wood, Sebastian A1 - Collado-Fregoso, Elisa A1 - Heeney, Martin A1 - Durrant, James A1 - Kim, Ji-Seon T1 - Impact of Fullerene Intercalation on Structural and Thermal Properties of Organic Photovoltaic Blends JF - The journal of physical chemistry : C, Nanomaterials and interfaces N2 - The performance of organic photovoltaic blend devices is critically dependent on the polymer:fullerene interface. These interfaces are expected to impact the structural and thermal properties of the polymer with regards to the conjugated backbone planarity and transition temperatures during annealing/cooling processes. Here, we report the impact of fullerene intercalation on structural and thermal properties of poly(2,5-bis(3-tetradecylthiophen-2-yOthieno[3,2-b]thiophene (PBTTT), a highly stable material known to exhibit liquid crystalline behavior. We undertake a detailed systematic study of the extent of intercalation in the PBTTT:fullerene blend, considering the use of four different fullerene derivatives and also varying the loading ratios. Resonant Raman spectroscopy allows morphology in situ during controlled heating and cooling. We find that small fullerene molecules readily intercalate into PBTTT crystallites, resulting in a planarization of the polymer backbone, but high fullerene loading ratios or larger fullerenes result in nonintercalated domains. During cooling from melt, nonintercalated blend films are found to return to their original morphology and reproduce all thermal transitions on cooling with minimal hysteresis. Intercalated blend films show significant hysteresis on cooling due to the crystallized fullerene attempting to reintercalate. The strongest hysteresis is for intercalated blend films with excess fullerene loading ratio, which form a distinct nanoribbon morphology and exhibit a reduced geminate recombination rate. These results reveal that careful consideration should be taken during device fabrication, as postdeposition thermal treatments significantly impact the charge generation and recombination dynamics. Y1 - 2017 U6 - https://doi.org/10.1021/acs.jpcc.7b05893 SN - 1932-7447 VL - 121 SP - 20976 EP - 20985 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Fudickar, Werner A1 - Linker, Torsten T1 - Synthesis of Pyridylanthracenes and Their Reversible Reaction with Singlet Oxygen to Endoperoxides JF - The journal of organic chemistry N2 - The ortho, meta, and para isomers of 9,10-dipyridylanthracene 1 have been synthesized and converted into their endoperoxides 1-O-2 upon oxidation with singlet oxygen. The kinetics of this reaction can be controlled by the substitution pattern and the solvent: in highly polar solvents, the meta isomer is the most reactive, whereas the ortho isomer is oxidized fastest in nonpolar solvents. Heating of the endoperoxides affords the parent anthracenes by release of singlet oxygen. Y1 - 2017 U6 - https://doi.org/10.1021/acs.joc.7b01765 SN - 0022-3263 VL - 82 SP - 9258 EP - 9262 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Bauch, Marcel A1 - Krtitschka, Angela A1 - Linker, Torsten T1 - Photooxygenation of oxygen-substituted naphthalenes JF - Journal of physical organic chemistry N2 - The reaction of oxygen-substituted naphthalenes with singlet oxygen (O-1(2)) has been investigated, and labile endoperoxides have been isolated and characterized at -78 degrees C for the first time. Low-temperature kinetics by UV spectroscopy revealed that alkoxy and silyloxy substituents remarkably increase the rate of photooxygenations compared to 1,4-dimethylnaphthalene, whereas acyloxy-substituted acenes are inert towards O-1(2). The reactivities nicely correlate with HOMO energies and free activation energies, which we determined by density functional theory calculations. The lability of the isolated endoperoxides is due to their very fast back reaction to the corresponding naphthalenes even at -20 degrees C under release of O-1(2), making them to superior sources of this reactive species under very mild conditions. Finally, a carbohydrate-substituted naphthalene has been synthesized, which reacts reversibly with O-1(2) and might be applied for enantioselective oxidations in future work. KW - kinetics KW - labile peroxides KW - low-temperature experiments KW - naphthalenes KW - singlet oxygen Y1 - 2017 U6 - https://doi.org/10.1002/poc.3734 SN - 0894-3230 SN - 1099-1395 VL - 30 SP - 6803 EP - 6813 PB - Wiley CY - Hoboken ER - TY - GEN A1 - Ihmels, Heiko A1 - Linker, Torsten A1 - Trofimov, Aleksei T1 - Editorial T2 - Journal of physical organic chemistry Y1 - 2017 U6 - https://doi.org/10.1002/poc.3745 SN - 0894-3230 SN - 1099-1395 VL - 30 PB - Wiley CY - Hoboken ER - TY - JOUR A1 - Ryabchun, Alexander A1 - Sakhno, Oksana A1 - Stumpe, Joachim A1 - Bobrovsky, Alexey T1 - Full-Polymer Cholesteric Composites for Transmission and Reflection Holographic Gratings JF - Advanced optical materials N2 - A new type of self-organized materials based on cholesteric networks filled with photoactive side-chain copolymer is being developed. Supramolecular helical structure of cholesteric polymer network resulting in the selective reflection is used as a photonic scaffold. Photochromic azobenzene-containing nematic copolymer is embedded in cholesteric scaffold and utilized as a photoactive media for optical pattering. 1D and 2D transmission diffraction gratings are successfully recorded in composite films by holographic technique. For the first time the possibility to create selective reflection gratings in cholesteric material mimicking the natural optical properties of cholesteric mesophase is demonstrated. That enables the coexistence of two selective gratings, where one has an intrinsic cholesteric periodic helical structure and the other is a holographic grating generated in photochromic polymer. The full-polymer composites provide high light-induced optical anisotropy due to effective photo-orientation of side-chain fragments of the azobenzene-containing liquid crystalline polymer, and prevent the degradation of the helical superstructure maintaining all optical properties of cholesteric mesophase. The proposed class of optical materials could be easily applied to a broad range of polymeric materials with specific functionality. The versatility of the adjustment and material preprogramming combined with high optical performance makes these materials a highly promising candidate for modern optical and photonic applications. KW - azobenzene KW - cholesteric scaffolds KW - holography KW - LC polymer KW - polarization diffraction grating KW - reflection grating Y1 - 2017 U6 - https://doi.org/10.1002/adom.201700314 SN - 2195-1071 VL - 5 SP - 376 EP - 379 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Yang, Guang A1 - Ding, Hong-ming A1 - Kochovski, Zdravko A1 - Hu, Rongting A1 - Lu, Yan A1 - Ma, Yu-qiang A1 - Chen, Guosong A1 - Jiang, Ming T1 - Highly Ordered Self-Assembly of Native Proteins into 1D, 2D, and 3D Structures Modulated by the Tether Length of Assembly-Inducing Ligands JF - Angewandte Chemie : a journal of the Gesellschaft Deutscher Chemiker ; International edition N2 - In nature, proteins self-assemble into various structures with different dimensions. To construct these nanostructures in laboratories, normally proteins with different symmetries are selected. However, most of these approaches are engineering-intensive and highly dependent on the accuracy of the protein design. Herein, we report that a simple native protein LecA assembles into one-dimensional nanoribbons and nanowires, two-dimensional nanosheets, and three-dimensional layered structures controlled mainly by small-molecule assembly-inducing ligands RnG (n = 1, 2, 3, 4, 5) with varying numbers of ethylene oxide repeating units. To understand the formation mechanism of the different morphologies controlled by the small-molecule structure, molecular simulations were performed from microscopic and mesoscopic view, which presented a clear relationship between the molecular structure of the ligands and the assembled patterns. These results introduce an easy strategy to control the assembly structure and dimension, which could shed light on controlled protein assembly. KW - carbohydrate-protein interactions KW - dual non-covalent interactions KW - molecular simulations KW - protein self-assembly Y1 - 2017 U6 - https://doi.org/10.1002/anie.201703052 SN - 1433-7851 SN - 1521-3773 VL - 56 SP - 10691 EP - 10695 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Ghaisari, Sara A1 - Winklhofer, Michael A1 - Strauch, Peter A1 - Klumpp, Stefan A1 - Faivre, Damien T1 - Magnetosome Organization in Magnetotactic Bacteria Unraveled by Ferromagnetic Resonance Spectroscopy JF - Biophysical journal N2 - Magnetotactic bacteria form assemblies of magnetic nanoparticles called magnetosomes. These magnetosomes are typically arranged in chains, but other forms of assemblies such as clusters can be observed in some species and genetic mutants. As such, the bacteria have developed as a model for the understanding of how organization of particles can influence the magnetic properties. Here, we use ferromagnetic resonance spectroscopy to measure the magnetic anisotropies in different strains of Magnetosprillum gtyphiswaldense MSR-1, a bacterial species that is amendable to genetic mutations. We combine our experimental results with a model describing the spectra. The model includes chain imperfections and misalignments following a Fisher distribution function, in addition to the intrinsic magnetic properties of the magnetosomes. Therefore, by applying the model to analyze the ferromagnetic resonance data, the distribution of orientations in the bulk sample can be retrieved in addition to the average magnetosome arrangement. In this way, we quantitatively characterize the magnetosome arrangement in both wild-type cells and Delta mamJ mutants, which exhibit differing magnetosome organization. Y1 - 2017 U6 - https://doi.org/10.1016/j.bpj.2017.06.031 SN - 0006-3495 SN - 1542-0086 VL - 113 SP - 637 EP - 644 PB - Cell Press CY - Cambridge ER - TY - JOUR A1 - Sprenger, Heike A1 - Erban, Alexander A1 - Seddig, Sylvia A1 - Rudack, Katharina A1 - Thalhammer, Anja A1 - Le, Mai Q. A1 - Walther, Dirk A1 - Zuther, Ellen A1 - Koehl, Karin I. A1 - Kopka, Joachim A1 - Hincha, Dirk K. T1 - Metabolite and transcript markers for the prediction of potato drought tolerance JF - Plant Biotechnology Journal N2 - Potato (Solanum tuberosum L.) is one of the most important food crops worldwide. Current potato varieties are highly susceptible to drought stress. In view of global climate change, selection of cultivars with improved drought tolerance and high yield potential is of paramount importance. Drought tolerance breeding of potato is currently based on direct selection according to yield and phenotypic traits and requires multiple trials under drought conditions. Marker-assisted selection (MAS) is cheaper, faster and reduces classification errors caused by noncontrolled environmental effects. We analysed 31 potato cultivars grown under optimal and reduced water supply in six independent field trials. Drought tolerance was determined as tuber starch yield. Leaf samples from young plants were screened for preselected transcript and nontargeted metabolite abundance using qRT-PCR and GC-MS profiling, respectively. Transcript marker candidates were selected from a published RNA-Seq data set. A Random Forest machine learning approach extracted metabolite and transcript markers for drought tolerance prediction with low error rates of 6% and 9%, respectively. Moreover, by combining transcript and metabolite markers, the prediction error was reduced to 4.3%. Feature selection from Random Forest models allowed model minimization, yielding a minimal combination of only 20 metabolite and transcript markers that were successfully tested for their reproducibility in 16 independent agronomic field trials. We demonstrate that a minimum combination of transcript and metabolite markers sampled at early cultivation stages predicts potato yield stability under drought largely independent of seasonal and regional agronomic conditions. KW - drought tolerance KW - machine learning KW - metabolite markers KW - potato (Solanum tuberosum) KW - prediction models KW - transcript markers Y1 - 2017 U6 - https://doi.org/10.1111/pbi.12840 SN - 1467-7644 SN - 1467-7652 VL - 16 IS - 4 SP - 939 EP - 950 PB - Wiley CY - Hoboken ER - TY - JOUR A1 - Schmidt, Marco F. A1 - Korb, Oliver A1 - Abell, Chris T1 - Antagonists of the miRNA-Argonaute 2 Protein Complex BT - Anti-miR-AGOs JF - Drug Target miRNA: Methods and Protocols N2 - microRNAs (miRNAs) have been identified as high-value drug targets. A widely applied strategy in miRNA inhibition is the use of antisense agents. However, it has been shown that oligonucleotides are poorly cell permeable because of their complex chemical structure and due to their negatively charged backbone. Consequently, the general application of oligonucleotides in therapy is limited. Since miRNAs’ functions are executed exclusively by the Argonaute 2 protein, we therefore describe a protocol for the design of a novel miRNA inhibitor class: antagonists of the miRNA-Argonaute 2 protein complex, so-called anti-miR-AGOs, that not only block the crucial binding site of the target miRNA but also bind to the protein’s active site. Due to their lower molecular weight and, thus, more drug-like chemical structure, the novel inhibitor class may show better pharmacokinetic properties than reported oligonucleotide inhibitors, enabling them for potential therapeutic use. KW - Drug design KW - microRNA KW - miRNA-Argonaute 2 protein complex KW - miRNA inhibitors KW - miRNA seed region Y1 - 2016 SN - 978-1-4939-6563-2 SN - 978-1-4939-6561-8 SN - 978-1-4939-8236-3 U6 - https://doi.org/10.1007/978-1-4939-6563-2_17 SN - 1064-3745 SN - 1940-6029 VL - 1517 SP - 239 EP - 249 PB - Springer CY - New York ER - TY - JOUR A1 - Kleinpeter, Erich A1 - Heydenreich, Matthias A1 - Koch, Andreas A1 - Krtitschka, Angela A1 - Krüger, Tobias A1 - Linker, Torsten T1 - NMR spectroscopic conformational analysis of 4-methylene-cyclohexyl pivalateThe effect of sp(2) hybridization JF - Magnetic resonance in chemistry N2 - The conformational equilibrium of the axial/equatorial conformers of 4-methylene-cyclohexyl pivalate is studied by dynamic NMR spectroscopy in a methylene chloride/freon mixture. At 153K, the ring interconversion gets slow on the nuclear magnetic resonance timescale, the conformational equilibrium (-G degrees) can be examined, and the barrier to ring interconversion (G(#)) can be determined. The structural influence of sp(2) hybridization on both G degrees and G(#) of the cyclohexyl moiety can be quantified. KW - 4-methylene-cyclohexyl pivalate KW - conformational analysis KW - dynamic NMR spectroscopy KW - exo-methylene conformational effect at cyclohexane KW - quantum chemical calculations Y1 - 2017 U6 - https://doi.org/10.1002/mrc.4630 SN - 0749-1581 SN - 1097-458X VL - 55 SP - 1073 EP - 1078 PB - Wiley CY - Hoboken ER - TY - JOUR A1 - Balderas-Valadez, Ruth Fabiola A1 - Antunez, E. E. A1 - Olive-Mendez, Sion Federico A1 - Pacholski, Claudia A1 - Campos-Alvarez, Jose A1 - Bokhimi, Xim A1 - Agarwal, V. T1 - Porous silicon pillar and bilayer structure as a nucleation center for the formation of aligned vanadium pentoxide nanorods JF - Ceramics International N2 - Porous silicon single layer (PSM), bilayer (PSB) and pillar (PSP) structures have been evaluated as nucleation centers for vanadium pentoxide (V2O5) crystals. Deposition of vanadium precursor over different substrates (drop casting technique), followed by annealing treatment under Ar-H-2 (5% H-2) atmosphere, induced crystallization of vanadium oxide. With respect to c-Si/SiO2 substrate, V2O5 nanorods with relatively large aspect ratio were formed over and within PSP structures. On the other hand, pores in PSM and PSB were found to be filled with relatively smaller crystals. Additionally, PSB provided a nucleation substrate capable to align the nanocrystals in a preferential orientation, while V2O5 crystals grown on PSP were found to be randomly aligned around the nanoporous pillar microstructure. Nanorods and nanocrystals were identified as V2O5 by temperature-controlled XRD measurements and evidence of their crystalline nature was observed via transmission electron microscopy. A careful analysis of electronic microscopy images allows the identification of the facets composing the ends of the crystals and its corresponding surface free energy has been evaluated employing the Wulff theorem. Such high surface area composite structures have potential applications as cathode material in Lithium-ion batteries. KW - Porous silicon KW - Vanadium pentoxide KW - Nanorods KW - Crystallization KW - Nanostructures Y1 - 2017 U6 - https://doi.org/10.1016/j.ceramint.2017.03.114 SN - 0272-8842 SN - 1873-3956 VL - 43 SP - 8023 EP - 8030 PB - Elsevier CY - Oxford ER - TY - JOUR A1 - Marco, Makungu A1 - Deyou, Tsegaye A1 - Gruhonjic, Amra A1 - Holleran, John A1 - Duffy, Sandra A1 - Heydenreich, Matthias A1 - Firtzpatrick, Paul A. A1 - Landberg, Goran A1 - Koch, Andreas A1 - Derese, Solomon A1 - Pelletier, Jerry A1 - Avery, Vicky M. A1 - Erdelyi, Mate A1 - Yenesew, Abiy T1 - Pterocarpans and isoflavones from the root bark of Millettia micans and of Millettia dura JF - Phytochemistry letters KW - Millettia micans KW - Millettia dura KW - Pterocarpan KW - Isoflavone KW - Cytotoxicity KW - Plasmodium falciparum Y1 - 2017 U6 - https://doi.org/10.1016/j.phytol.2017.07.012 SN - 1874-3900 SN - 1876-7486 VL - 21 SP - 216 EP - 220 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Atilaw, Yoseph A1 - Duffy, Sandra A1 - Heydenreich, Matthias A1 - Muiva-Mutisya, Lois A1 - Avery, Vicky M. A1 - Erdelyi, Mate A1 - Yenesew, Abiy T1 - Three Chalconoids and a Pterocarpene from the Roots of Tephrosia aequilata JF - Molecules N2 - In our search for new antiplasmodial agents, the CH2Cl2/CH3OH (1:1) extract of the roots of Tephrosia aequilata was investigated, and observed to cause 100% mortality of the chloroquine-sensitive (3D7) strain of Plasmodium falciparum at a 10 mg/mL concentration. From this extract three new chalconoids, E-2,6-dimethoxy-3,4-(2,2-dimethyl)pyranoretrochalcone (1, aequichalcone A), Z-2,6-dimethoxy-3,4-(2,2-dimethyl)pyranoretrochalcone (2, aequichalcone B), 4-ethoxy-3-hydroxypraecansone B (3, aequichalcone C) and a new pterocarpene, 3,4:8,9-dimethylenedioxy-6a,11a-pterocarpene (4), along with seven known compounds were isolated. The purified compounds were characterized by NMR spectroscopic and mass spectrometric analyses. Compound 1 slowly converts into 2 in solution, and thus the latter may have been enriched, or formed, during the extraction and separation process. The isomeric compounds 1 and 2 were both observed in the crude extract. Some of the isolated constituents showed good to moderate antiplasmodial activity against the chloroquine-sensitive (3D7) strain of Plasmodium falciparum. KW - Tephrosia aequilata KW - chalcone KW - retrochalcone KW - aequichalcone A KW - aequichalcone B KW - aequichalcone C KW - pterocarpene KW - antiplasmodial Y1 - 2017 U6 - https://doi.org/10.3390/molecules22020318 SN - 1420-3049 VL - 22 IS - 2 PB - MDPI CY - Basel ER - TY - JOUR A1 - Andrews, N. L. P. A1 - Ferguson, T. A1 - Rangaswamy, A. M. M. A1 - Bernicky, A. R. A1 - Henning, N. A1 - Dudelzak, A. A1 - Reich, Oliver A1 - Barnes, Jack A. A1 - Loock, Hans-Peter T1 - Hadamard-Transform Fluorescence Excitation-Emission-Matrix Spectroscopy JF - Analytical chemistry N2 - We present a fluorescence excitation-emission-matrix spectrometer with superior data acquisition rates over previous instruments. Light from a white light emitting diode (LED) source is dispersed onto a digital micromirror array (DMA) and encoded using binary n-size Walsh functions ("barcodes"). The encoded excitation light is used to irradiate the liquid sample and its fluorescence is dispersed and detected using a conventional array spectrometer. After exposure to excitation light encoded in n different ways, the 2-dimensional excitation-emission-matrix (EEM) spectrum is obtained by inverse Hadamard transformation. Using this technique we examined the kinetics of the fluorescence of rhodamine B as a function of temperature and the acid-driven demetalation of chlorophyll into pheophytin-a. For these experiments, EEM spectra with 31 excitation channels and 2048 emission channels were recorded every 15 s. In total, data from over 3000 EEM spectra were included in this report. It is shown that the increase in data acquisition rate can be as high as [{n(n + 1)}/2]-fold over conventional EEM spectrometers. Spectral acquisition rates of more than two spectra per second were demonstrated. Y1 - 2017 U6 - https://doi.org/10.1021/acs.analchem.7b02400 SN - 0003-2700 SN - 1520-6882 VL - 89 SP - 8554 EP - 8564 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Adebayo, Segun Emmanuel A1 - Hashim, Norhashila A1 - Hass, Roland A1 - Reich, Oliver A1 - Regen, Christian A1 - Münzberg, Marvin A1 - Abdan, Khalina A1 - Hanafi, Marsyita A1 - Zude-Sasse, Manuela T1 - Using absorption and reduced scattering coefficients for non-destructive analyses of fruit flesh firmness and soluble solids content in pear JF - Postharvest Biology and Technology N2 - Quality attributes of fruit determine its acceptability by the retailer and consumer. The objective of this work was to investigate the potential of absorption (μa) and reduced scattering (μs’) coefficients of European pear to analyze its fruit flesh firmness and soluble solids content (SSC). The absolute reference values, μa* (cm−1) and μs’* (cm−1), of pear were invasively measured, employing multi-spectral photon density wave (PDW) spectroscopy at preselected wavelengths of 515, 690, and 940 nm considering two batches of unripe and overripe fruit. On eight measuring dates during fruit development, μa and μs’ were analyzed non-destructively by means of laser light backscattering imaging (LLBI) at similar wavelengths of 532, 660, and 830 nm by means of fitting according to Farrell’s diffusion theory, using fix reference values of either μa* or μs’*. Both, the μa* and the μa as well as μs’* and μs’ showed similar trends. Considering the non-destructively measured data during fruit development, μa at 660 nm decreased 91 till 141 days after full bloom (dafb) from 1.49 cm−1 to 0.74 cm−1 due to chlorophyll degradation. At 830 nm, μa only slightly decreased from 0.41 cm−1 to 0.35 cm−1. The μs’ at all wavelengths revealed a decreasing trend as the fruit developed. The difference measured at 532 nm was most pronounced decreasing from 24 cm−1 to 10 cm−1, while at 660 nm and 830 nm values decreased from 15 cm−1 to 13 cm−1 and from 10 cm−1 to 8 cm−1, respectively. When building calibration models with partial least-squares regression analysis on the optical properties for non-destructive analysis of the fruit SSC, μa at 532 nm and 830 nm resulted in a correlation coefficient of R = 0.66, however, showing high measuring uncertainty. The combination of all three wavelengths gave an enhanced, encouraging R = 0.89 for firmness analysis using μs’ in the freshly picked fruit. KW - Absorption KW - Non-destructive KW - Pear KW - Quality KW - Scattering Y1 - 2017 U6 - https://doi.org/10.1016/j.postharvbio.2017.04.004 SN - 0925-5214 SN - 1873-2356 VL - 130 SP - 56 EP - 63 PB - Elsevier CY - Amsterdam ER - TY - GEN A1 - Hass, Roland A1 - Sandmann, Michael A1 - Reich, Oliver T1 - Photonic sensing in highly concentrated biotechnical processes by photon density wave spectroscopy T2 - Proceedings SPIE 10323, 25th International Conference on Optical Fiber Sensors N2 - Photon Density Wave (PDW) spectroscopy is introduced as a new approach for photonic sensing in highly concentrated biotechnical processes. It independently quantifies the absorption and reduced scattering coefficient calibration-free and as a function of time, thus describing the optical properties in the vis/NIR range of the biomaterial during their processing. As examples of industrial relevance, enzymatic milk coagulation, beer mashing, and algae cultivation in photo bioreactors are discussed. KW - Photon Density Wave Spectroscopy KW - multiple light scattering KW - fermentation KW - algae cultivation KW - process analytical technology KW - fiber spectroscopy Y1 - 2017 SN - 978-1-5090-4850-2 U6 - https://doi.org/10.1117/12.2263617 SN - 0277-786X SN - 1996-756X VL - 10323 PB - IEEE CY - New York ER - TY - GEN A1 - Naolou, Toufik A1 - Rühl, Eckart A1 - Lendlein, Andreas T1 - Nanocarriers BT - Architecture, transport, and topical application of drugs for therapeutic use T2 - European Journal of Pharmaceutics and Biopharmaceutics Y1 - 2017 U6 - https://doi.org/10.1016/j.ejpb.2017.03.004 SN - 0939-6411 SN - 1873-3441 VL - 116 SP - 1 EP - 3 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Utecht, Manuel Martin A1 - Palmer, Richard E. A1 - Klamroth, Tillmann T1 - Quantum chemical approach to atomic manipulation of chlorobenzene on the Si(111)-7 x 7 surface BT - Resonance localization, vibrational activation, and surface dynamics JF - Physical review materials N2 - We present a cluster model to describe the localization of hot charge carriers on the Si(111)-7 x 7 surface, which leads to (nonlocal) desorption of chlorobenzene molecules in scanning tunneling microscope (STM) manipulation experiments. The localized charge carriers are modeled by a small cluster. By means of quantum chemical calculations, this cluster model explains many experimental findings from STM manipulation. We show that the negative charge is mainly localized in the surface, while the positive one also resides on the molecule. Both resonances boost desorption: In the negative resonance the adatom is elevated; in the positive one the chemisorption bond between the silicon surface adatom and chlorobenzene is broken. We find normal modes promoting desorption matching experimental low-temperature activation energies for electron-and hole-induced desorption. Y1 - 2017 U6 - https://doi.org/10.1103/PhysRevMaterials.1.026001 SN - 2475-9953 VL - 1 IS - 2 PB - American Physical Society CY - College Park ER - TY - JOUR A1 - Wolf, Thomas J. A. A1 - Holzmeier, Fabian A1 - Wagner, Isabella A1 - Berrah, Nora A1 - Bostedt, Christoph A1 - Bozek, John A1 - Bucksbaum, Phil A1 - Coffee, Ryan A1 - Cryan, James A1 - Farrell, Joe A1 - Feifel, Raimund A1 - Martinez, Todd J. A1 - McFarland, Brian A1 - Mucke, Melanie A1 - Nandi, Saikat A1 - Tarantelli, Francesco A1 - Fischer, Ingo A1 - Gühr, Markus T1 - Observing Femtosecond Fragmentation Using Ultrafast X-ray-Induced Auger Spectra JF - Applied sciences N2 - Molecules often fragment after photoionization in the gas phase. Usually, this process can only be investigated spectroscopically as long as there exists electron correlation between the photofragments. Important parameters, like their kinetic energy after separation, cannot be investigated. We are reporting on a femtosecond time-resolved Auger electron spectroscopy study concerning the photofragmentation dynamics of thymine. We observe the appearance of clearly distinguishable signatures from thymines neutral photofragment isocyanic acid. Furthermore, we observe a time-dependent shift of its spectrum, which we can attribute to the influence of the charged fragment on the Auger electron. This allows us to map our time-dependent dataset onto the fragmentation coordinate. The time dependence of the shift supports efficient transformation of the excess energy gained from photoionization into kinetic energy of the fragments. Our method is broadly applicable to the investigation of photofragmentation processes. KW - ultrafast dynamics KW - Auger electron spectroscopy KW - photofragmentation KW - photochemistry Y1 - 2017 U6 - https://doi.org/10.3390/app7070681 SN - 2076-3417 VL - 7 IS - 7 PB - MDPI CY - Basel ER - TY - JOUR A1 - Selemani, Ramadhani Selemani Omari A1 - Nondo, Omari A1 - Moshi, Mainen Julius A1 - Erasto, Paul A1 - Masimba, Pax Jessey A1 - Machumi, Francis A1 - Kidukuli, Abdul Waziri A1 - Heydenreich, Matthias A1 - Zofou, Denis T1 - Anti-plasmodial activity of Norcaesalpin D and extracts of four medicinal plants used traditionally for treatment of malaria JF - BMC Complementary and Alternative Medicine volume N2 - Background: Malaria is an old life-threatening parasitic disease that is still affecting many people, mainly children living in sub-Saharan Africa. Availability of effective antimalarial drugs played a significant role in the treatment and control of malaria. However, recent information on the emergence of P. falciparum parasites resistant to one of the artemisinin-based combination therapies suggests the need for discovery of new drug molecules. Therefore, this study aimed to evaluate the antiplasmodial activity of extracts, fractions and isolated compound from medicinal plants traditionally used in the treatment of malaria in Tanzania. Methods: Dry powdered plant materials were extracted by cold macerations using different solvents. Norcaesalpin D was isolated by column chromatography from dichloromethane root extract of Caesalpinia bonducella and its structure was assigned based on the spectral data. Crude extracts, fractions and isolated compound were evaluated for antiplasmodial activity against chloroquine-sensitive P. falciparum (3D7), chloroquine-resistant P. falciparum (Dd2, K1) and artemisinin-resistant P. falciparum (IPC 5202 Battambang, IPC 4912 Mondolkiri) strains using the parasite lactate dehydrogenase assay. Results: The results indicated that extracts of Erythrina schliebenii, Holarrhena pubescens, Dissotis melleri and C. bonducella exhibited antiplasmodial activity against Dd2 parasites. Ethanolic root extract of E. schliebenii had an IC50 of 1.87 mu g/mL while methanolic and ethanolic root extracts of H. pubescens exhibited an IC50 = 2.05 mu g/mL and IC50 = 2.43 mu g/mL, respectively. Fractions from H. pubescens and C. bonducella roots were found to be highly active against K1, Dd2 and artemisinin-resistant parasites. Norcaesalpin D from C. bonducella root extract was active with IC50 of 0.98, 1.85 and 2.13 mu g/mL against 3D7, Dd2 and IPC 4912-Mondolkiri parasites, respectively. Conclusions: Antiplasmodial activity of norcaesalpin D and extracts of E. schliebenii, H. pubescens, D. melleri and C. bonducella reported in this study requires further attention for the discovery of antimalarial lead compounds for future drug development. KW - Antiplasmodial KW - norcaesalpin D KW - E. schliebenii KW - H. pubescens KW - D. melleri KW - C. bonducella Y1 - 2017 U6 - https://doi.org/10.1186/s12906-017-1673-8 SN - 1472-6882 VL - 17 PB - BioMed Central CY - London ER - TY - JOUR A1 - Meyners, Christian A1 - Mertens, Monique A1 - Wessig, Pablo A1 - Meyer-Almes, Franz-Josef T1 - A Fluorescence-Lifetime-Based Binding Assay for Class IIa Histone Deacetylases JF - Chemistry - a European journal N2 - Class IIa histone deacetylases (HDACs) show extremely low enzymatic activity and no commonly accepted endogenous substrate is known today. Increasing evidence suggests that these enzymes exert their effect rather through molecular recognition of acetylated proteins and recruiting other proteins like HDAC3 to the desired target location. Accordingly, class IIa HDACs like bromodomains have been suggested to act as “Readers” of acetyl marks, whereas enzymatically active HDACs of class I or IIb are called “Erasers” to highlight their capability to remove acetyl groups from acetylated histones or other proteins. Small-molecule ligands of class IIa histone deacetylases (HDACs) have gained tremendous attention during the last decade and have been suggested as pharmaceutical targets in several indication areas such as cancer, Huntington's disease and muscular atrophy. Up to now, only enzyme activity assays with artificial chemically activated trifluoroacetylated substrates are in use for the identification and characterization of new active compounds against class IIa HDACs. Here, we describe the first binding assay for this class of HDAC enzymes that involves a simple mix-and-measure procedure and an extraordinarily robust fluorescence lifetime readout based on [1,3]dioxolo[4,5-f]benzodioxole-based ligand probes. The principle of the assay is generic and can also be transferred to class I HDAC8. KW - drug discovery KW - enzymes KW - fluorescent probes KW - high-throughput screening KW - hydrolases Y1 - 2017 U6 - https://doi.org/10.1002/chem.201605140 SN - 0947-6539 SN - 1521-3765 VL - 23 IS - 13 SP - 3107 EP - 3116 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Shainyan, Bagrat A. A1 - Belyakov, Alexander V. A1 - Sigolaev, Yurii F. A1 - Khramov, Alexander N. A1 - Kleinpeter, Erich T1 - Molecular Structure and Conformational Analysis of 1-Phenyl-1-X-1-Silacyclohexanes (X = F, Cl) by Electron Diffraction, Low-Temperature NMR, and Quantum Chemical Calculations JF - The journal of organic chemistry N2 - The molecular structure and conformational preferences of 1-phenyl-1-X-1-silacyclohexanes C5H10Si(Ph,X) (X = F (3), Cl (4)) were studied by gas-phase electron diffraction, low-temperature NMR spectroscopy, and high-level quantum chemical calculations. In the gas phase only three (3) and two (4) stable conformers differing in the axial or equatorial location of the phenyl group and the angle of rotation about the Si-C-ph bond (axi and axo denote the Ph group lying in or out of the X-Si-C-ph plane) contribute to the equilibrium. In 3 the ratio Ph-eq:Ph-axo:Ph-axi is 40(12):55(24):5 and 64:20:16 by experiment and theory, respectively. In 4 the ratio Ph-eq:Ph-axo is 79(15):21(15) and 71:29 by experiment and theory (M06-2X calculations), respectively. The gas-phase electron diffraction parameters are in good agreement with those obtained from theory at the M06-2X/aug-ccPVTZ and MP2/aug-cc-pVTZ levels. Unlike the case for M06-2X, MP2 calculations indicate that 3-Ph-eq conformer lies 0.5 kcal/mol higher than the 3-Ph-axo, conformer. As follows from QTAIM analysis, the phenyl group is more stable when it is located in the axial position but produces destabilization of the silacyclohexane ring: By low temperature NMR spectroscopy the six-membered ring interconversion could be frozen, at 103 K and the present conformational equilibria of 3 and 4 could be determined. The ratio of the conformers is 3-Ph-eq:3-Ph-ax = (75-77):(23-25) and 4-Ph-eq:4-Ph-ax = 82:18. Y1 - 2017 U6 - https://doi.org/10.1021/acs.joc.6b02538 SN - 0022-3263 VL - 82 IS - 1 SP - 461 EP - 470 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Ehlert, Christopher A1 - Klamroth, Tillmann T1 - The quest for best suited references for configuration interaction singles calculations of core excited states JF - Journal of computational chemistry : organic, inorganic, physical, biological N2 - Near edge X-ray absorption fine structure (NEXAFS) simulations based on the conventional configuration interaction singles (CIS) lead to excitation energies, which are systematically blue shifted. Using a (restricted) open shell core hole reference instead of the Hartree Fock (HF) ground state orbitals improves (Decleva et al., Chem. Phys., 1992, 168, 51) excitation energies and the shape of the spectra significantly. In this work, we systematically vary the underlying SCF approaches, that is, based on HF or density functional theory, to identify best suited reference orbitals using a series of small test molecules. We compare the energies of the K edges and NEXAFS spectra to experimental data. The main improvement compared to conventional CIS, that is, using HF ground state orbitals, is due to the electrostatic influence of the core hole. Different SCF approaches, density functionals, or the use of fractional occupations lead only to comparably small changes. Furthermore, to account for bigger systems, we adapt the core-valence separation for our approach. We demonstrate that the good quality of the spectrum is not influenced by this approximation when used together with the non-separated ground state wave function. Simultaneously, the computational demands are reduced remarkably. (C) 2016 Wiley Periodicals, Inc. KW - core excited states KW - configuration interaction KW - near edge X-ray absorption fine structure Y1 - 2016 U6 - https://doi.org/10.1002/jcc.24531 SN - 0192-8651 SN - 1096-987X VL - 38 SP - 116 EP - 126 PB - Wiley-Blackwell CY - Hoboken ER - TY - JOUR A1 - von Klitzing, Regine A1 - Stehl, Dimitrij A1 - Pogrzeba, Tobias A1 - Schomaäcker, Reinhard A1 - Minullina, Renata A1 - Panchal, Abhishek A1 - Konnova, Svetlana A1 - Fakhrullin, Rawil A1 - Koetz, Joachim A1 - Moehwald, Helmuth A1 - Lvov, Yuri T1 - Halloysites Stabilized Emulsions for Hydroformylation of Long Chain Olefins JF - Advanced materials interfaces N2 - Halloysites as tubular alumosilicates are introduced as inexpensive natural nanoparticles to form and stabilize oil-water emulsions. This stabilized emulsion is shown to enable efficient interfacial catalytic reactions. Yield, selectivity, and product separation can be tremendously enhanced, e.g., for the hydroformylation reaction of dodecene to tridecanal. In perspective, this type of formulation may be used for oil spill dispersions. The key elements of the described formulations are clay nanotubes (halloysites) which are highly anisometric, can be filled by helper molecules, and are abundantly available in thousands of tons, making this technology scalable for industrial applications. Y1 - 2016 U6 - https://doi.org/10.1002/admi.201600435 SN - 2196-7350 VL - 4 IS - 1 PB - Wiley CY - Hoboken ER - TY - JOUR A1 - Schweighöfer, F. A1 - Moreno, J. A1 - Bobone, Sara A1 - Chiantia, Salvatore A1 - Herrmann, A. A1 - Hecht, S. A1 - Wachtveitl, Josef T1 - Connectivity pattern modifies excited state relaxation dynamics of fluorophore-photoswitch molecular dyads JF - Physical chemistry, chemical physics : a journal of European Chemical Societies N2 - In order to modulate the emission of BODIPY fluorophores, they were connected to a diarylethene (DAE) photoswitch via phenylene-ethynylene linkers of different lengths and orientations. The latter allowed for modulation of the electronic coupling in the prepared four BODIPY-DAE dyads, which were compared also to appropriate BODIPY and DAE model compounds by steady state as well as time-resolved spectroscopies. In their open isomers, all dyads show comparable luminescence behavior indicative of an unperturbed BODIPY fluorophore. In strong contrast, in the closed isomers the BODIPY emission is efficiently quenched but the deactivation mechanism depends on the nature of the linker. The most promising dyad was rendered water-soluble by means of micellar encapsulation and aqueous suspensions were investigated by fluorescence spectroscopy and microscopy. Our results (i) illustrate that the electronic communication between the BODIPY and DAE units can indeed be fine-tuned by the nature of the linker to achieve fluorescence modulation while maintaining photoswitchability and (ii) highlight potential applications to image and control biological processes with high spatio-temporal resolution. Y1 - 2016 U6 - https://doi.org/10.1039/c6cp07112k SN - 1463-9076 SN - 1463-9084 VL - 19 SP - 4010 EP - 4018 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Reschke, Stefan A1 - Mebs, Stefan A1 - Sigfridsson-Clauss, Kajsa G. V. A1 - Kositzki, Ramona A1 - Leimkühler, Silke A1 - Haumann, Michael T1 - Protonation and Sulfido versus Oxo Ligation Changes at the Molybdenum Cofactor in Xanthine Dehydrogenase (XDH) Variants Studied by X-ray Absorption Spectroscopy JF - Inorganic chemistry N2 - Enzymes of the xanthine oxidase family are among the best characterized mononuclear molybdenum enzymes. Open questions about their mechanism of transfer of an oxygen atom to the substrate remain. The enzymes share a molybdenum cofactor (Moco) with the metal ion binding a molybdopterin (MPT) molecule via its dithiolene function and terminal sulfur and oxygen groups. For xanthine dehydrogenase (XDH) from the bacterium Rhodobacter capsulatus, we used X-ray absorption spectroscopy to determine the Mo site structure, its changes in a pH range of 5-10, and the influence of amino acids (Glu730 and Gln179) close to Moco in wild-type (WT), Q179A, and E730A variants, complemented by enzyme kinetics and quantum chemical studies. Oxidized WT and Q179A revealed a similar Mo (VI) ion with each one MPT, Mo=O, Mo-O-, and Mo=S ligand, and a weak Mo-O(E730) bond at alkaline pH. Protonation of an oxo to a hydroxo (OH) ligand (pK similar to 6.8) causes inhibition of XDH at acidic pH, whereas deprotonated xanthine (pK similar to 8.8) is an inhibitor at alkaline pH. A similar acidic pK for the WT and Q179A. variants, as well as the metrical parameters of the Mo site and density functional theory calculations, suggested protonation at the equatorial oxo group. The sulfido was replaced with an oxo ligand in the inactive E730A variant, further showing another oxo and one Mo OH ligand at Mo, which are independent of pH. Our findings suggest a reaction mechanism for XDH in which an initial oxo rather than a hydroxo group and the sulfido ligand are essential for xanthine oxidation. Y1 - 2017 U6 - https://doi.org/10.1021/acs.inorgchem.6b02846 SN - 0020-1669 SN - 1520-510X VL - 56 IS - 4 SP - 2165 EP - 2176 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Lippold, Holger A1 - Eidner, Sascha A1 - Kumke, Michael Uwe A1 - Lippmann-Pipke, Johanna T1 - Dynamics of metal-humate complexation equilibria as revealed by isotope exchange studies - a matter of concentration and time JF - Geochimica et cosmochimica acta : journal of the Geochemical Society and the Meteoritical Society N2 - Complexation with dissolved humic matter can be crucial in controlling the mobility of toxic or radioactive contaminant metals. For speciation and transport modelling, a dynamic equilibrium process is commonly assumed, where association and dissociation run permanently. This is, however, questionable in view of reported observations of a growing resistance to dissociation over time. In this study, the isotope exchange principle was employed to gain direct insight into the dynamics of the complexation equilibrium, including kinetic inertisation phenomena. Terbium(III), an analogue of trivalent actinides, was used as a representative of higher-valent metals. Isotherms of binding to (flocculated) humic acid, determined by means of Tb-160 as a radiotracer, were found to be identical regardless of whether the radioisotope was introduced together with the bulk of stable Tb-159 or subsequently after pre-equilibration for up to 3 months. Consequently, there is a permanent exchange of free and humic-bound Tb since all available binding sites are occupied in the plateau region of the isotherm. The existence of a dynamic equilibrium was thus evidenced. There was no indication of an inertisation under these experimental conditions. If the small amount of Tb-160 was introduced prior to saturation with Tb-159, the expected partial desorption of Tb-160 occurred at much lower rates than observed for the equilibration process in the reverse procedure. In addition, the rates decreased with time of pre-equilibration. Inertisation phenomena are thus confined to the stronger sites of humic molecules (occupied at low metal concentrations). Analysing the time-dependent course of isotope exchange according to first-order kinetics indicated that up to 3 years are needed to attain equilibrium. Since, however, metal-humic interaction remains reversible, exchange of metals between humic carriers and mineral surfaces cannot be neglected on the long time scale to be considered in predictive transport models. KW - Humic substances KW - Metal complexation KW - Kinetics KW - Reversibility KW - Isotope exchange KW - Dynamic equilibrium Y1 - 2016 U6 - https://doi.org/10.1016/j.gca.2016.10.019 SN - 0016-7037 SN - 1872-9533 VL - 197 SP - 62 EP - 70 PB - Elsevier CY - Oxford ER - TY - JOUR A1 - Michalik-Onichimowska, Aleksandra A1 - Beitz, Toralf A1 - Panne, Ulrich A1 - Löhmannsröben, Hans-Gerd A1 - Riedel, Jens T1 - Microsecond mid-infrared laser pulses for atmospheric pressure laser ablation/ionization of liquid samples JF - Sensors and actuators : B, Chemical N2 - In many laser based ionization techniques with a subsequent drift time separation, the laser pulse generating the ions is considered as the start time to. Therefore, an accurate temporal definition of this event is crucial for the resolution of the experiments. In this contribution, the laser induced plume dynamics of liquids evaporating into atmospheric pressure are visualized for two distinctively different laser pulse widths, Delta t = 6 nanoseconds and Delta tau = 280 microseconds. For ns-pulses the expansion of the generated vapour against atmospheric pressure is found to lead to turbulences inside the gas phase. This results in spatial and temporal broadening of the nascent clouds. A more equilibrated expansion, without artificial smearing of the temporal resolution can, in contrast, be observed to follow mu s-pulse excitation. This leads to the counterintuitive finding that longer laser pulses results in an increased temporal vapour formation definition. To examine if this fume expansion also eventually results in a better definition of ion formation, the nascent vapour plumes were expanded into a linear drift tube ion mobility spectrometer (IMS). This time resolved detection of ion formation corroborates the temporal broadening caused by collisional impeding of the supersonic expansion at atmospheric pressure and the overall better defined ion formation by evaporation with long laser pulses. A direct comparison of the observed results strongly suggests the coexistence of two individual ion formation mechanisms that can be specifically addressed by the use of appropriate laser sources. KW - Laser ablation KW - Ion mobility spectrometry KW - Pulse duration KW - Plume KW - Ionization Y1 - 2016 U6 - https://doi.org/10.1016/j.snb.2016.06.155 SN - 0925-4005 VL - 238 SP - 298 EP - 305 PB - Elsevier CY - Lausanne ER - TY - JOUR A1 - Rumschöttel, Jens A1 - Baus, Susann A1 - Kosmella, Sabine A1 - Appelhans, Dietmar A1 - Koetz, Joachim T1 - Incorporation of DNA/PEI polyplexes into gelatin/chitosan hydrogel scaffolds BT - a mu-DSC study JF - Composite interfaces N2 - Polyplexes between a double-stranded Salmon DNA and hyperbranched poly(ethyleneimine) (PEI) as well as a maltosylated PEI-Mal were incorporated into a gelatin/chitosan hydrogel scaffold. Calorimetric experiments of the polyplexes show a decrease of the melting temperature in presence of PEI and a peak splitting in presence of PEI-Mal, which can be interpreted to a partial compaction of the DNA strands in presence of PEI-Mal. When the polyplexes are incorporated into a gelatin/chitosan scaffold in the swollen state, the DNA melting peaks at 90 and 93 degrees C, respectively, indicate in both cases the release of the DNA at the surface of the hydrogel scaffold in a more compact form. Specific interactions between the PEI-Mal shell and gelatin are responsible for the tuning of the release properties in presence of the maltose units in the hyperbranched PEI. KW - DNA-PEI polyplexes KW - maltosylated poly(ethyleneimine) KW - mu-DSC KW - DNA release KW - gelatin/chitosan hydrogel scaffold Y1 - 2017 U6 - https://doi.org/10.1080/09276440.2017.1302725 SN - 1568-5543 VL - 25 IS - 1 SP - 1 EP - 11 PB - Routledge, Taylor & Francis Group CY - Abingdon ER - TY - JOUR A1 - Zühlke, Martin A1 - Sass, Stephan A1 - Riebe, Daniel A1 - Beitz, Toralf A1 - Löhmannsröben, Hans-Gerd T1 - Real-Time Reaction Monitoring of an Organic Multistep Reaction by Electrospray Ionization-Ion Mobility Spectrometry JF - ChemPlusChem N2 - The capability of electrospray ionization (ESI)-ion mobility (IM) spectrometry for reaction monitoring is assessed both as a stand-alone real-time technique and in combination with HPLC. A three-step chemical reaction, consisting of a Williamson ether synthesis followed by a hydrogenation and an N-alkylation step, is chosen for demonstration. Intermediates and products are determined with a drift time to mass-per-charge correlation. Addition of an HPLC column to the setup increases the separation power and allows the determination of further species. Monitoring of the intensities of the various species over the reaction time allows the detection of the end of reaction, determination of the rate-limiting step, observation of the system response in discontinuous processes, and optimization of the mass ratios of the starting materials. However, charge competition in ESI influences the quantitative detection of substances in the reaction mixture. Therefore, two different methods are investigated, which allow the quantification and investigation of reaction kinetics. The first method is based on the pre-separation of the compounds on an HPLC column and their subsequent individual detection in the ESI-IM spectrometer. The second method involves an extended calibration procedure, which considers charge competition effects and facilitates nearly real-time quantification. KW - electrospray ionization KW - HPLC KW - ion mobility spectrometry KW - reaction mechanisms KW - reaction monitoring Y1 - 2017 U6 - https://doi.org/10.1002/cplu.201700296 SN - 2192-6506 VL - 82 SP - 1266 EP - 1273 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Morgner, Frank A1 - Bennemann, Mark A1 - Cywiński, Piotr J. A1 - Kollosche, Matthias A1 - Górski, Krzysztof A1 - Pietraszkiewicz, Marek A1 - Geßner, André A1 - Löhmannsröben, Hans-Gerd T1 - Elastic FRET sensors for contactless pressure measurement JF - RSC Advances : an international journal to further the chemical sciences N2 - Contactless pressure monitoring based on Forster resonance energy transfer between donor/acceptor pairs immobilized within elastomers is demonstrated. The donor/acceptor energy transfer is employed by dispersing terbium(III) tris[(2-hydroxybenzoyl)-2-aminoethyl] amine complex (LLC, donor) and CdSe/ZnS quantum dots (QD655, acceptor) in styrene-ethylene/buthylene-styrene (SEBS) and poly(dimethylsiloxane) (PDMS). The continuous monitoring of QD luminescence showed a reversible intensity change as the pressure signal is alternated between two stable states indicating a pressure sensitivity of 6350 cps kPa(-1). Time-resolved measurements show the pressure impact on the FRET signal due to an increase of decay time (270 ms up to 420 ms) for the donor signal and parallel drop of decay time (170 mu s to 155 mu s) for the acceptor signal as the net pressure applied. The LLC/QD655 sensors enable a contactless readout as well as space resolved monitoring to enable miniaturization towards smaller integrated stretchable opto-electronics. Elastic FRET sensors can potentially lead to developing profitable analysis systems capable to outdo conventional wired electronic systems (inductive, capacitive, ultrasonic and photoelectric sensors) especially for point-of-care diagnostics, biological monitoring required for wearable electronics. Y1 - 2017 U6 - https://doi.org/10.1039/c7ra06379b SN - 2046-2069 VL - 7 SP - 50578 EP - 50583 PB - RSC Publishing CY - Cambridge ER - TY - JOUR A1 - Paramonov, Guennaddi K. A1 - Kühn, Oliver A1 - Bandrauk, André D. T1 - Excitation of H+ 2 with one-cycle laser pulses BT - shaped post-laser-field electronic oscillations, generation of higher- and lower-order harmonics JF - Molecular physics : MP ; an international journal in the field of chemical physics N2 - Non-Born–Oppenheimer quantum dynamics of H+ 2 excited by shaped one-cycle laser pulses linearly polarised along the molecular axis have been studied by the numerical solution of the time-dependent Schrödinger equation within a three-dimensional model, including the internuclear separation, R, and the electron coordinates z and ρ. Laser carrier frequencies corresponding to the wavelengths λ l = 25 nm through λ l = 400 nm were used and the amplitudes of the pulses were chosen such that the energy of H+ 2 was close to its dissociation threshold at the end of any laser pulse applied. It is shown that there exists a characteristic oscillation frequency ωosc ≃ 0.2265 au (corresponding to the period of τosc ≃ 0.671 fs and the wavelength of λosc ≃ 201 nm) that manifests itself as a ‘carrier’ frequency of temporally shaped oscillations of the time-dependent expectation values ⟨z ⟩ and ⟨∂V/∂z ⟩ that emerge at the ends of the laser pulses and exist on a timescale of at least 50 fs. Time-dependent expectation values ⟨ρ⟩ and ⟨∂V /∂ρ⟩ of the optically passive degree of freedom, ρ, demonstrate post-laser-field oscillations at two basic frequencies ωρ 1 ≈ ωosc and ωρ 2 ≈ 2ωosc. Power spectra associated with the electronic motion show higher- and lower-order harmonics with respect to the driving field. KW - One-cycle laser pulses KW - post-laser-field electronic oscillations KW - generation of higher and lower harmonics Y1 - 2017 U6 - https://doi.org/10.1080/00268976.2017.1288938 SN - 0026-8976 SN - 1362-3028 VL - 115 IS - 15/16 SP - 1846 EP - 1860 PB - Taylor & Francis CY - London ER - TY - JOUR A1 - Plötz, Per-Arno A1 - Megow, Jörg A1 - Niehaus, Thomas A1 - Kühn, Oliver T1 - Spectral densities for Frenkel exciton dynamics in molecular crystals BT - a TD-DFTB approach JF - The journal of chemical physics : bridges a gap between journals of physics and journals of chemistr N2 - Effects of thermal fluctuations on the electronic excitation energies and intermonomeric Coulomb couplings are investigated for a perylene-tetracarboxylic-diimidecrystal. To this end, time dependent density functional theory based tight binding (TD-DFTB) in the linear response formulation is used in combination with electronic ground state classical molecular dynamics. As a result, a parametrized Frenkel exciton Hamiltonian is obtained, with the effect of exciton-vibrational coupling being described by spectral densities. Employing dynamically defined normal modes, these spectral densities are analyzed in great detail, thus providing insight into the effect of specific intramolecular motions on excitation energies and Coulomb couplings. This distinguishes the present method from approaches using fixed transition densities. The efficiency by which intramolecular contributions to the spectral density can be calculated is a clear advantage of this method as compared with standard TD-DFT. Published by AIP Publishing. Y1 - 2017 U6 - https://doi.org/10.1063/1.4976625 SN - 0021-9606 SN - 1089-7690 VL - 146 PB - American Institute of Physics CY - Melville ER - TY - THES A1 - You, Zewang T1 - Conformational transition of peptide-functionalized cryogels enabling shape-memory capability Y1 - 2017 ER - TY - JOUR A1 - Muthaura, Charles N. A1 - Keriko, Joseph M. A1 - Mutai, Charles A1 - Yenesew, Abiy A1 - Heydenreich, Matthias A1 - Atilaw, Yoseph A1 - Gathirwa, Jeremiah W. A1 - Irungu, Beatrice N. A1 - Derese, Solomon T1 - Antiplasmodial, cytotoxicity and phytochemical constituents of four maytenus species used in traditional medicine in Kenya JF - The natural products journal N2 - Background: In Kenya, several species of the genus Maytenus are used in traditional medicine to treat many diseases including malaria. In this study, phytochemical constituents and extracts of Maytenus undata, M. putterlickioides, M. senegalensis and M. heterophylla were evaluated to determine compound/s responsible for antimalarial activity. Objective: To isolate antiplasmodial compounds from these plant species which could be used as marker compounds in the standardization of their extracts as a phytomedicine for malaria. Methods: Constituents were isolated through activity-guided fractionation of the MeOH/CHCl3 (1:1) extracts and in vitro inhibition of Plasmodium falciparum. Cytotoxicity was evaluated using Vero cells and the compounds were elucidated on the basis of NMR spectroscopy. Results: Fractionation of the extracts resulted in the isolation of ten known compounds. Compound 1 showed promising antiplasmodial activity with IC50, 3.63 and 3.95 ng/ml against chloroquine sensitive (D6) and resistant (W2) P. falciparum, respectively and moderate cytotoxicity (CC50, 37.5 ng/ml) against Vero E6 cells. The other compounds showed weak antiplasmodial (IC50 > 1.93 mu g/ml) and cytotoxic (CC50 > 39.52 mu g/ml) activities against P. falciparum and Vero E6 cells, respectively. Conclusion: (20 alpha)-3-hydroxy-2-oxo-24-nor-friedela-1(10),3,5,7-tetraen-carboxylic acid-(29)-methyl-ester (pristimerin) (1) was the most active marker and lead compound that warrants further investigation as a template for the development of new antimalarial drugs. Pristimerin is reported for the first time in M. putterlickioides. 3-Hydroxyolean-12-en-28-oic acid (oleanolic acid) (5), stigmast-5-en-3-ol (beta-sitosterol) (6), 3-oxo-28-friedelanoic acid (7), olean-12-en-3-ol (beta-amyrin) (8), lup-20(29)-en-3-ol (lupeol) (9) and lup-20(29)-en-3-one (lupenone) (10) are reported for the first time in M. undata. KW - Antimalarial plants KW - antiplasmodial KW - cytotoxicity KW - marker compound KW - Maytenus spp. KW - phytomedicine KW - pristimerin Y1 - 2017 U6 - https://doi.org/10.2174/2210315507666161206144050 SN - 2210-3155 SN - 2210-3163 VL - 7 IS - 2 SP - 144 EP - 152 PB - Bentham Science Publ. CY - Sharjah ER - TY - THES A1 - Schulze, Nicole T1 - Neue Templatphasen zur anisotropen Goldnanopartikelherstellung durch den Einsatz strukturbildender Polymere T1 - New template phases for anisotropic gold nanoparticle production through the use of structure-forming polymers N2 - Ziel der vorliegenden Arbeit war die Synthese und Charakterisierung von anisotropen Goldnanopartikeln in einer geeigneten Polyelektrolyt-modifizierten Templatphase. Der Mittelpunkt bildet dabei die Auswahl einer geeigneten Templatphase, zur Synthese von einheitlichen und reproduzierbaren anisotropen Goldnanopartikeln mit den daraus resultierenden besonderen Eigenschaften. Bei der Synthese der anisotropen Goldnanopartikeln lag der Fokus in der Verwendung von Vesikeln als Templatphase, wobei hier der Einfluss unterschiedlicher strukturbildender Polymere (stark alternierende Maleamid-Copolymere PalH, PalPh, PalPhCarb und PalPhBisCarb mit verschiedener Konformation) und Tenside (SDS, AOT – anionische Tenside) bei verschiedenen Synthese- und Abtrennungsbedingungen untersucht werden sollte. Im ersten Teil der Arbeit konnte gezeigt werden, dass PalPhBisCarb bei einem pH-Wert von 9 die Bedingungen eines Röhrenbildners für eine morphologische Transformation von einer vesikulären Phase in eine röhrenförmige Netzwerkstruktur erfüllt und somit als Templatphase zur formgesteuerten Bildung von Nanopartikeln genutzt werden kann. Im zweiten Teil der Arbeit wurde dargelegt, dass die Templatphase PalPhBisCarb (pH-Wert von 9, Konzentration von 0,01 wt.%) mit AOT als Tensid und PL90G als Phospholipid (im Verhältnis 1:1) die effektivste Wahl einer Templatphase für die Bildung von anisotropen Strukturen in einem einstufigen Prozess darstellt. Bei einer konstanten Synthesetemperatur von 45 °C wurden die besten Ergebnisse bei einer Goldchloridkonzentration von 2 mM, einem Gold-Templat-Verhältnis von 3:1 und einer Synthesezeit von 30 Minuten erzielt. Ausbeute an anisotropen Strukturen lag bei 52 % (Anteil an dreieckigen Nanoplättchen von 19 %). Durch Erhöhung der Synthesetemperatur konnte die Ausbeute auf 56 % (29 %) erhöht werden. Im dritten Teil konnte durch zeitabhängige Untersuchungen gezeigt werden, dass bei Vorhandensein von PalPhBisCarb die Bildung der energetisch nicht bevorzugten Plättchen-Strukturen bei Raumtemperatur initiiert wird und bei 45 °C ein Optimum annimmt. Kintetische Untersuchungen haben gezeigt, dass die Bildung dreieckiger Nanoplättchen bei schrittweiser Zugabe der Goldchlorid-Präkursorlösung zur PalPhBisCarb enthaltenden Templatphase durch die Dosierrate der vesikulären Templatphase gesteuert werden kann. In umgekehrter Weise findet bei Zugabe der Templatphase zur Goldchlorid-Präkursorlösung bei 45 °C ein ähnlicher, kinetisch gesteuerter Prozess der Bildung von Nanodreiecken statt mit einer maximalen Ausbeute dreieckigen Nanoplättchen von 29 %. Im letzten Kapitel erfolgten erste Versuche zur Abtrennung dreieckiger Nanoplättchen von den übrigen Geometrien der gemischten Nanopartikellösung mittels tensidinduzierter Verarmungsfällung. Bei Verwendung von AOT mit einer Konzentration von 0,015 M wurde eine Ausbeute an Nanoplättchen von 99 %, wovon 72 % dreieckiger Geometrien hatten, erreicht. N2 - The aim of the present work was the synthesis and characterization of anisotropic gold nanoparticles in a suitable polyelectrolyte-modified template phase. The focus was on the selection of a suitable template phase for the synthesis of uniform and reproducible anisotropic gold nanoparticles with the resulting special properties. In the synthesis of the anisotropic gold nanoparticles, the focus was on the use of vesicles as a template phase. Here, the influence of different structure-forming polymers (strongly alternating maleimide copolymers PalH, PalPh, PalPhCarb and PalPhBisCarb with different conformations) and surfactants (SDS, AOT - anionic surfactants) should be studied at various synthesis and separation conditions. In the first part of the work, it could be shown that PalPhBisCarb at pH 9 meets the requirements of a tubulating agent for a morphological transformation of a vesicular phase into a tubular network structure and thus can be used as a template phase for the shape-controlled formation of nanoparticles. In the second part of the work, it was shown that the template phase PalPhBisCarb (pH value of 9, concentration of 0.01 wt.%) with AOT as surfactant and PL90G as phospholipid (in the ratio 1:1) is the most effective choice of template phase for the formation of anisotropic structures in a one-step process. At a constant synthesis temperature of 45 °C, the best results were achieved with a gold chloride concentration of 2 mM, a gold-template ratio of 3:1 and a synthesis time of 30 minutes. The yield of anisotropic structures was 52% (triangular nanoplatelet content of 19%). By increasing the synthesis temperature, the yield could be increased to 56% (29%). In the third part, it was shown by time-dependent investigations that in the presence of PalPhBisCarb, the formation of the not energetically preferred platelet structures is initiated at room temperature and assumes an optimum at 45 °C. Kinetical studies have shown that the formation of triangular nanosheets can be controlled by the dosing rate of the vesicular template phase when the gold chloride precursor solution is gradually added to the PalPhBisCarb-containing template phase. Conversely, upon addition of the template phase to the gold chloride precursor solution at 45 °C, a similar, kinetically controlled process of formation of nanodimers takes place with a maximum yield of triangular nanoplatelets of 29%. In the last chapter, initial attempts were made to separate triangular nanoplatelets from the other geometries of the mixed nanoparticle solution by means of surfactant-induced depletion flocculation. When AOT was used at a concentration of 0.015 M, a yield of nanoplatelets of 99%, of which 72% had triangular geometries, was achieved. KW - Nanopartikel KW - nanoparticle KW - Templatphase KW - template phase KW - Gold KW - gold KW - anisotrop KW - anisotropic Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-409515 ER - TY - THES A1 - Firkala, Tamás T1 - Investigation of nanoparticle-molecule interactions and pharmaceutical model formulations by means of surface enhanced raman spectroscopy Y1 - 2017 ER - TY - THES A1 - Stephan, Florian T1 - Mehrfachintegration von Experimenten im Chemielehrgang Y1 - 2017 ER - TY - JOUR A1 - Shainyan, Bagrat A. A1 - Kirpichenko, Svetlana V. A1 - Kleinpeter, Erich T1 - Conformational Preferences of the Phenyl Group in 1-Phenyl-1-X-1-silacyclo-hexanes (X = MeO, HO) and 3-Phenyl-3-X-3-silatetrahydropyrans (X = HO, H) by Low Temperature C-13 NMR Spectroscopy and Theoretical Calculations JF - The journal of organic chemistry N2 - New Si-phenyl-substituted silacyclohexanes and 3-silatetrahydropyrans have been synthesized and studied with respect to the conformational equilibria of the heterosix-membered ring by low temperature C-13 NMR spectroscopy and quantum chemical calculations. For 1-methoxy-1-phenylsilacyclohexane 1 and 3-phenyl-3-silatetrahydropyran 4 the conformational equilibria could be frozen and assigned. The Ph-ax reversible arrow Ph-eq equilibrium constants at 103 K are 2.21 for 1 and 4.59 for 4. In complete agreement with former studies of similar silicon compounds, molecules 1 and 4 prefer to adopt the Pheq conformation. The conformational equilibria of 1-hydroxy-1-phenylsilacydohexane 2 and 3-hydroxy-3-phenyl-3-silatetrahydropyran 3 could not be frozen at 100 K and proved to be heavily one-sided (if not anancomeric). Obviously, there is a general trend of predominance of Phax conformer in the gas phase and of Pheq in solution. For the isolated molecules of silanols 2 and 3, calculations allowed to explain the axial predominance of the phenyl group by a larger polarization of the Si-Ph than of the Si-O bond in the Phax conformer and additional destabilization of 3-Ph-eq conformer by repulsion of unidirectional dipoles of the endocyclic oxygen lone pair and of the highly polar axial Si-O bond. Y1 - 2017 U6 - https://doi.org/10.1021/acs.joc.7b02505 SN - 0022-3263 VL - 82 SP - 13414 EP - 13422 PB - American Chemical Society CY - Washington ER - TY - THES A1 - Lorente Sánchez, Alejandro Jose T1 - Synthesis of side-chain polystyrenes for all organic solution processed OLEDs T1 - Synthese von Seitenketten-Polystyrolen für lösungsgefertigte OLEDs N2 - In the present work side-chain polystyrenes were synthesized and characterized, in order to be applied in multilayer OLEDs fabricated by solution process techniques. Manufacture of optoelectronic devices by solution process techniques is meant to decrease significantly fabrication cost and allow large scale production of such devices. This dissertation focusses in three series, enveloped in two material classes. The two classes differ to each other in the type of charge transport exhibited, either ambipolar transport or electron transport. All materials were applied in all-organic solution processed green Ir-based devices. In the first part, a series of ambipolar host materials were developed to transport both charge types, holes and electrons, and be applied especially as matrix for green Ir-based emitters. It was possible to increase devices efficacy by modulating the predominant charge transport type. This was achieved by modification of molecules electron transport part with more electron-deficient heterocycles or by extending the delocalization of the LUMO. Efficiencies up to 28.9 cd/A were observed for all-organic solution-process three layer devices. In the second part, suitability of triarylboranes and tetraphenylsilanes as electron transport materials was studied. High triplet energies were obtained, up to 2.95 eV, by rational combination of both molecular structures. Although the combination of both elements had a low effect in materials electron transport properties, high efficiencies around 24 cd/A were obtained for the series in all-organic solution-processed two layer devices. In the last part, benzene and pyridine were chosen as the series electron-transport motif. By controlling the relative pyridine content (RPC) solubility into methanol was induced for polystyrenes with bulky side-chains. Materials with RPC ≥ 0.5 could be deposited orthogonally from solution without harming underlying layers. From the best of our knowledge, this is the first time such materials are applied in this architecture showing moderate efficiencies around 10 cd/A in all-organic solution processed OLEDs. Overall, the outcome of these studies will actively contribute to the current research on materials for all-solution processed OLEDs. N2 - Organische Licht emittierende Dioden (OLEDs) gelten als die nächste Technologie für Beleuchtungsanwendungen. In letzter Zeit wurden immer mehr kommerzielle Produkte herausgebracht, für die Anwendung in Displays und Beleuchtungssystemen. Doch diese Produkte werden hauptsächlich durch Vakuumabscheidung der organischen Moleküle hergestellt, was hohe Fertigungskosten zur Folge hat. Um die Kosten zu senken, sollten die Geräte über Lösungsverfahren hergestellt werden, was die Produktion durch Drucktechniken ermöglicht. Allerdings gibt es noch einige Herausforderungen bei den Lösungsprozessen, auch bei der Verarbeitung bekannter Materialien, die überwunden werden müssen, wie Rekristallisation oder schlechte Filmbildung. Deshalb sind weitere Materialmodifikationen erforderlich. Ein sehr verbreiteter Ansatz ist die Einarbeitung von Materialien, die im Vakuum verarbeitet werden können, wie Seitenkettenpolymer-Rückgräte. Wir haben in dieser Arbeit drei Reihen von Seitenketten-Polystyrolen synthetisiert und charakterisiert. Die Polymere der ersten Reihe sollten als Hostmaterialien für phosphoreszierende Emitter in der Emissionsschicht dienen. Die Polymere der zweiten und dritten Reihe fungierten als Elektron-Transport-Materialien. Die Polymereigenschaften wurden durch Änderungen der molekularen Struktur der Seitenketten modifiziert. Von allen Materialien wurden dünne Schichten aus Lösung abgeschieden und diese on grünen Ir-basierten OLEDs untersucht. Für alle organischen, aus Lösung gefertigten OLEDs wurden Effizienzen von bis zu 28,9 cd/A erreicht. KW - OLED KW - solution process KW - charge transport KW - polymers KW - OLED KW - Lösungsprozess KW - Ladung Transport KW - Polymere Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-398006 ER - TY - THES A1 - Dippel, Sandor T1 - Development of functional hydrogels for sensor applications T1 - Entwicklung funktionalisierter Hydrogele für Sensor Anwendungen N2 - In this work, a sensor system based on thermoresponsive materials is developed by utilizing a modular approach. By synthesizing three different key monomers containing either a carboxyl, alkene or alkyne end group connected with a spacer to the methacrylic polymerizable unit, a flexible copolymerization strategy has been set up with oligo ethylene glycol methacrylates. This allows to tune the lower critical solution temperature (LCST) of the polymers in aqueous media. The molar masses are variable thanks to the excurse taken in polymerization in ionic liquids thus stretching molar masses from 25 to over 1000 kDa. The systems that were shown shown to be effective in aqueous solution could be immobilized on surfaces by copolymerizing photo crosslinkable units. The immobilized systems were formulated to give different layer thicknesses, swelling ratios and mesh sizes depending on the demand of the coupling reaction. The coupling of detector units or model molecules is approached via reactions of the click chemistry pool, and the reactions are evaluated on their efficiency under those aspects, too. These coupling reactions are followed by surface plasmon resonance spectroscopy (SPR) to judge efficiency. With these tools at hand, Salmonella saccharides could be selectively detected by SPR. Influenza viruses were detected in solution by turbidimetry in solution as well as by a copolymerized solvatochromic dye to track binding via the changes of the polymers’ fluorescence by said binding event. This effect could also be achieved by utilizing the thermoresponsive behavior. Another demonstrator consists of the detection system bound to a quartz surface, thus allowing the virus detection on a solid carrier. The experiments show the great potential of combining the concepts of thermoresponsive materials and click chemistry to develop technically simple sensors for large biomolecules and viruses. N2 - Diese Arbeit befasst sich mit der Entwicklung von Sensorsystemen für biologische Analyten wie Bakterien und Viren. Die Sensoren beruhen auf thermoresponsiven Polymeren und die Entwicklung wird Schritt für Schritt ausgehend von der Monomersynthese dargelegt. Die Grundidee ist es alle Einzelschritte so modular wie möglich zu halten. Die Kopplungseinheiten für die späteren Erkennungsgruppen bestehen aus Carboxyl, Alken und Alkinfunktionalitäten, die zuerst mit einem Ethylenglycolspacer mit variabler Länge verknüpft werden und dann mit der polymerisierbaren Methylmethacrylatgruppe versehen werden. Diese koppelbaren Monomere werden mit Di- oder (Oligoethylenglycol)methacrylaten copolymerisiert. Je nach Verhältnis ist so auch die untere kritische Entmischungstemperatur (LCST) einstellbar. Mit der Erweiterung der Polymerisationstechnik um ionische Flüssigkeiten als Lösemittel lassen sich Molmassen von 25 bis über 1000 kDa einstellen. Um die Polymere funktionell zu erweitern, lassen sich auch benzophenonhaltige Monomere zur Vernetzung oder Immobilisierung copolymerisieren. Naphthalsäureimidhaltige Monomere wiederum dienen als Signaleinheit, da sie durch Verändern der Polarität ihrer Umgebung solvatochrom reagieren. Durch Aufschleudern und UV-Vernetzen lassen sich Gelschichten mit guter Schichtdickenkontrolle herstellen. Dabei sind die Substrate nur auf den jeweiligen Zweck beschränkt. Dank des Baukastenprinzips kann auch die Maschenweite oder der Quellgrad der Gele eingestellt werden. Die Polymere oder Hydrogele werden mit Hilfe von effizienten Reaktionen swe sogenannten „Click Chemie“ umgesetzt und die Reaktionen werden durchleuchtet, ob sie diesen Ansprüchen gerecht werden. Je nach Möglichkeit wird das Anknüpfen mittels Oberflächenplasmonenresonanzspektroskopie(SPR) verfolgt, so wie zum Beispiel die Kopplung eines Phagen-Oberflächenproteins und das selektive Binden eines Membransaccharids des Salmonellen Bakteriums. Influenza Viren werden selektiv mit Hilfe eines Erkennungspeptids gebunden und mit Hilfe von Trübungsspektroskopie bzw. dem thermoresponsiven Verhalten des Trägerpolymers nachgewiesen. Ein weiterer dargelegter Ansatz ist das Nachweisen von geringen Virenkonzentrationen mit Hilfe eines Hydrogels oder von Polymeren in Lösung, die jeweils mit einem solvatochromen Farbstoff ausgestattet sind, der auf die Umgebungsänderung durch den Virus reagiert. Die Experimente zeigen das große Potential von geschickt kombinierten thermoresponsiven Materialien, die mittels Funktionalisierung durch Click-Chemie zu technisch einfachen Nachweissystemen für Biomoleküle und sogar ganze Zellen entwickelt werden können. KW - biosensors KW - polymer synthesis KW - lower critical solution temperature KW - surface modification KW - smart materials KW - Biosensoren KW - Polymersynthese KW - untere kritische Entmischungstemperatur KW - schaltbare Materialien Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-398252 ER - TY - THES A1 - John, Daniela T1 - Herstellung anisotroper Kolloide mittels templatgesteuerter Assemblierung und Kontaktdruckverfahren T1 - Generation of anisotropic colloids via templated-assisted assembly and contact printing N2 - Diese Arbeit befasste sich mit neuen Konzepten zur Darstellung anisotroper Partikelsysteme durch Anordnung von funktionalisierten Partikeln unter Zuhilfenahme etablierter Methoden wie der templatgestützten Assemblierung von Partikeln und dem Mikrokontaktdruck. Das erste Teilprojekt beschäftigte sich mit der kontrollierten Herstellung von Faltenstrukturen im Mikro- bis Nanometerbereich. Die Faltenstrukturen entstehen durch die Relaxation eines Systems bestehend aus zwei übereinander liegender Schichten unterschiedlicher Elastizität. In diesem Fall wurden Falten auf einem elastischen PDMS-Substrat durch Generierung einer Oxidschicht auf der Substratoberfläche mittels Plasmabehandlung erzeugt. Die Dicke der Oxidschicht, die über verschiedene Parameter wie Behandlungszeit, Prozessleistung, Partialdruck des plasmaaktiven Gases, Vernetzungsgrad, Deformation sowie Substratdicke einstellbar war, bestimmte Wellenlänge und Amplitude der Falten. Das zweite Teilprojekt hatte die Darstellung komplexer, kolloidaler Strukturen auf Basis supramolekularer Wechselwirkungen zum Ziel. Dazu sollte vor allem die templatgestützte Assemblierung von Partikeln sowohl an fest-flüssig als auch flüssig-flüssig Grenzflächen genutzt werden. Für Erstere sollten die in Teilprojekt 1 hergestellten Faltenstrukturen als Templat, für Letztere Pickering-Emulsionen zur Anwendung kommen. Im ersten Fall wurden verschiedene, modifizierte Silicapartikel und Magnetitnanopartikel, deren Größe und Oberflächenfunktionalität (Cyclodextrin-, Azobenzol- und Arylazopyrazolgruppen) variierte, in Faltenstrukturen angeordnet. Die Anordnung hing dabei nicht nur vom gewählten Verfahren, sondern auch von Faktoren wie der Partikelkonzentration, der Oberflächenladung oder dem Größenverhältnis der Partikel zur Faltengeometrie ab. Die Kombination von Cyclodextrin (CD)- und Arylazopyrazol-modifizierten Partikeln ermöglichte, auf Basis einer Wirt-Gast-Wechselwirkung zwischen den Partikeltypen und einer templatgesteuerten Anordnung, die Bildung komplexer und strukturierter Formen in der Größenordnung mehrerer Mikrometer. Dieses System kann einerseits als Grundlage für die Herstellung verschiedener Janus-Partikel herangezogen werden, andererseits stellt die gerichtete Vernetzung zweier Partikelsysteme zu größeren Aggregaten den Grundstein für neuartige, funktionale Materialien dar. Neben der Anordnung an fest-flüssig Grenzflächen konnte außerdem nachgewiesen werden, dass Azobenzol-funktionalisierte Silicapartikel in der Lage sind, Pickering-Emulsionen über mehrere Monate zu stabilisieren. Die Stabilität und Größe der Emulsionsphase kann über Parameter, wie das Volumenverhältnis und die Konzentration, gesteuert werden. CD-funktionalisierte Silicapartikel besaßen dagegen keine Grenzflächenaktivität, während es CD-basierten Polymeren wiederum möglich war, durch die Ausbildung von Einschlusskomplexen mit den hydrophoben Molekülen der Ölphase stabile Emulsionen zu bilden. Dagegen zeigte die Kombination zwei verschiedener Partikelsysteme keinen oder einen destabilisierenden Effekt bezüglich der Ausbildung von Emulsionen. Im letzten Teilprojekt wurde die Herstellung multivalenter Silicapartikel mittels Mikrokontaktdruck untersucht. Die Faltenstrukturen wurden dabei als Stempel verwendet, wodurch es möglich war, die Patch-Geometrie über die Wellenlänge der Faltenstrukturen zu steuern. Als Tinte diente das positiv geladene Polyelektrolyt Polyethylenimin (PEI), welches über elektrostatische Wechselwirkungen auf unmodifizierten Silicapartikeln haftet. Im Gegensatz zum Drucken mit flachen Stempeln fiel dabei zunächst auf, dass sich die Tinte bei den Faltenstrukturen nicht gleichmäßig über die gesamte Substratfläche verteilt, sondern hauptsächlich in den Faltentälern vorlag. Dadurch handelte es sich bei dem Druckprozess letztlich nicht mehr um ein klassisches Mikrokontaktdruckverfahren, sondern um ein Tiefdruckverfahren. Über das Tiefdruckverfahren war es dann aber möglich, sowohl eine als auch beide Partikelhemisphären gleichzeitig und mit verschiedenen Funktionalitäten zu modifizieren und somit multivalente Silicapartikel zu generieren. In Abhängigkeit der Wellenlänge der Falten konnten auf einer Partikelhemisphäre zwei bis acht Patches abgebildet werden. Für die Patch-Geometrie, sprich Größe und Form der Patches, spielten zudem die Konzentration der Tinte auf dem Stempel, das Lösungsmittel zum Ablösen der Partikel nach dem Drucken sowie die Stempelhärte eine wichtige Rolle. Da die Stempelhärte aufgrund der variierenden Dicke der Oxidschicht bei verschiedenen Wellenlängen nicht kontant ist, wurden für den Druckprozess meist Abgüsse der Faltensubstrate verwendet. Auf diese Weise war auch die Vergleichbarkeit bei variierender Wellenlänge gewährleistet. Neben dem erfolgreichen Nachweis der Modifikation mittels Tiefdruckverfahren konnte auch gezeigt werden, dass über die Komplexierung mit PEI negativ geladene Nanopartikel auf die Partikeloberfläche aufgebracht werden können. N2 - This work dealt with new concepts of formation of anisotropic particle systems by using well-known methods such as template-assisted self-assembly of particles and microcontact printing. The first part paid attention to the controlled preparation of wrinkles in a micro or nanometer range. Wrinkles result from the relaxation of a system consisting of two layers with different elasticity. In this case, wrinkles were generated on top of an elastic PDMS substrate via plasma oxidation to a rigid surface. The thickness of the oxidized layer determined wavelength and amplitude of the wrinkles and could be varied by different parameters: time, power, partial pressure of plasma active gas, level of cross-linking, displacement and thickness of the PDMS substrate. The aim of the second part was the generation of complex, colloidal structures based on supramolecular interactions. For this, the template-assisted self-assembly of particles at solid-liquid and liquid-liquid interfaces should be used. Concerning the assembly at solid-liquid interfaces, we utilized the wrinkle structures generated in part 1 and, concerning the assembly at liquid-liquid interfaces, Pickering emulsions were chosen. In the first case, modified particles (silica and magnetite), that size and functionality (cyclodextrine, azobenzene and arylazopyrazol groups) varied, were assembled in wrinkle structures. The assembly depended not only on the chosen method, concentration, surface charge and size ratio between wrinkles and particles. The combination of cyclodextrine (CD)- and aryazopyralzol-modified particles enabled to build complex and regular structures based on supramolecular interactions between the two particles types and template-assisted self-assembly of these particles. On the one hand, this system generated Janus particles and on the other hand, the controlled agglomeration of two different particle types laid the foundation of new functional materials. Beside the assembly at solid-liquid interfaces, azobenzene-functionalized particles could be used for stabilizing Pickering emulsions. Formed emulsions were stable over a period of several months while parameters such as volume ratio and concentration influenced this stability as well as the volume of the emulsion phase. However, CD-functionalized silica particles possessed no interfacial activity to stabilize emulsions, whereas CD-based polymers could stabilize emulsions by forming inclusion complexes with hydrophobic molecules of the oil phase. On the other hand, the combination of CD-based and azobenzene-functionalized particle systems showed no or a destabilizing effect with regard to the formation of emulsions. In the last part, the generation of multivalent silica particles using a microcontact printing technique were analyzed. Wrinkles were used as stamps which induced the possibility to control the patch geometry by varying their wavelength. The positively charged polyelectrolyte (PEI) served as ink because it can stick to the silica surface by electrostatic interactions. Having a closer look at the printing process, a deviation to printing with flat stamps was found. In contrast to printing with flat stamps, ink solution, in case of wrinkles structures, did not spread over the whole substrate equally but laid mainly in the wrinkle groves. Due to this, the printing process is no longer a classical microcontact printing process but an intaglio printing process. Using the intaglio printing process, it was possible to modify both hemispheres of the particles at the same time and with different functionalities as well as generate multivalent silica particles. Depending on the wrinkle wavelength, two to eight patches per hemisphere could be achieved. The geometry of patches, means their size and arrangement, depended on the concentration of the ink on the stamps, the solvent to removing the particles from the stamps and the hardness of the stamps. Due to a varied thickness of the oxidized layer at different wrinkle wavelengths, the hardness of the stamps is not constant; that is why, casted wrinkles were utilized for the printing process. In this way, we ensure the comparability of printing using different wavelengths. Beside the successful proof of modification using intaglio printing, we could also show that negatively charged nanoparticles could be applied on the particle surface by embedding them into PEI before. KW - Faltenstrukturen KW - Anisotrope Kolloide KW - Kontaktdruck KW - Templatgesteuerte Assemblierung KW - wrinkles KW - patchy particles KW - particle assembly KW - printing Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-398270 ER - TY - GEN A1 - Mirskova, Anna N. A1 - Adamovich, Sergey N. A1 - Mirskov, Rudolf G. A1 - Schilde, Uwe T1 - Reaction of pharmacological active tris-(2-hydroxyethyl)ammonium 4-chlorophenylsulfanylacetate with ZnCl2 or NiCl2 BT - first conversion of a protic ionic liquid into metallated ionic liquid N2 - The reaction of pharmacological active protic ionic liquid tris-(2-hydroxyethyl)ammonium 4-chlorophenylsulfanylacetate H + N(CH 2 CH 2 OH) 3 ∙ ( - OOCCH 2 SC 6 H 4 Cl-4) (1) with zinc or nickel chloride in a ratio of 2:1 affords stable at room temperature powder-like adducts [H + N(CH 2 CH 2 OH) 3 ] 2 ∙ [M(OOCCH 2 SC 6 H 4 Cl-4) 2 Cl 2 ] 2- , M = Zn (2), Ni (3). By recrystallization from aqueous alcohol compound 2 unexpectedly gives Zn(OOCCH 2 SC 6 H 4 Cl-4) 2 ∙ 2H 2 O (4). Unlike 2, compound 3 gives crystals [N(CH 2 CH 2 OH) 3 ] 2 Ni 2+ · [ - OOCCH 2 SC 6 H 4 Cl-4] 2 (5), which have a structure of metallated ionic liquid. The structure of 5 has been proved by X-ray diffraction analysis. It is the first example of the conversion of a protic ionic liquid into potentially biological active metallated ionic liquid (1 → 3 → 5). T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 377 KW - Formate KW - Salts KW - Acids Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-401099 ER - TY - JOUR A1 - Schilde, Uwe A1 - Paz, Christian A1 - Ortiz, Leandro T1 - Crystal structure of erioflorin isolated from Podanthus mitiqui (L.) JF - Acta Crystallographica Section E : Crystallographic Communications N2 - The title compound, erioflorin, C19H24O6 [systematic name: (1aR,3S,4Z,5aR,8aR,9R,10aR)-1a, 2,3,5a, 7,8,8a, 9,10,10a-decahydro-3-hydroxy-4,10a-dimethyl-8-methylidene-7-oxooxireno[5,6] cyclodeca[1,2-b]furan-9-yl methacrylate], is a tricyclic germacrane sesquiterpene lactone, which was isolated from Podanthus mitiqui (L.). The compound crystallizes in the space group P2(1)2(1)2(1), and its molecular structure consists of a methacrylic ester of a ten-membered ring sesquiterpenoid annelated with an epoxide and a butyrolactone. The structure is stabilized by one intramolecular C-H center dot center dot center dot O hydrogen bond. An O-H center dot center dot center dot O hydrogen bond and further C-H center dot center dot center dot O interactions can be observed in the packing. KW - crystal structure KW - germacrane sesquiterpene lactone KW - Podanthus mitiqui Y1 - 2017 U6 - https://doi.org/10.1107/S2056989017001700 VL - 73 IS - 3 SP - 334 EP - 337 PB - International Union of Crystallography CY - Chester ER - TY - GEN A1 - Schilde, Uwe A1 - Paz, Christian A1 - Ortiz, Leandro T1 - Crystal structure of erioflorin isolated from Podanthus mitiqui (L.) N2 - The title compound, erioflorin, C19H24O6 [systematic name: (1aR,3S,4Z,5aR,8aR,9R,10aR)-1a, 2,3,5a, 7,8,8a, 9,10,10a-decahydro-3-hydroxy-4,10a-dimethyl-8-methylidene-7-oxooxireno[5,6] cyclodeca[1,2-b]furan-9-yl methacrylate], is a tricyclic germacrane sesquiterpene lactone, which was isolated from Podanthus mitiqui (L.). The compound crystallizes in the space group P2(1)2(1)2(1), and its molecular structure consists of a methacrylic ester of a ten-membered ring sesquiterpenoid annelated with an epoxide and a butyrolactone. The structure is stabilized by one intramolecular C-H center dot center dot center dot O hydrogen bond. An O-H center dot center dot center dot O hydrogen bond and further C-H center dot center dot center dot O interactions can be observed in the packing. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 379 KW - Podanthus mitiqui KW - crystal structure KW - germacrane sesquiterpene lactone Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-401832 ER - TY - THES A1 - Mertens, Monique T1 - Anwendungsorientierte Entwicklung neuer DBD-Derivate Y1 - 2017 ER - TY - GEN A1 - König, Jana A1 - Kelling, Alexandra A1 - Schilde, Uwe A1 - Strauch, Peter T1 - [µ2-O,O′,Oʺ,Oʺ′-Bis(1,2-dithiooxalato-S,S′)nickel(II)]bis[-O,O′-bis(1,2-dithiooxalato-S,S′)-nickel(II)pentaquaholmium(III)]hydrate, [Ho2Ni3(dto)6(H2O)10] N2 - Planar bis(1,2-dithiooxalato)nickelate(II), [Ni(dto)]2− reacts in aqueous solutions with lanthanide ions (Ln3+) to form pentanuclear, hetero-bimetallic complexes of the general composition [{Ln(H2O)n}2{Ni(dto)2}3]·xH2O. (n = 4 or 5; x = 9–12). The complex [{Ho(H2O)5}2{Ni(dto)2}3]·10H2O, Ho2Ni3, was synthesized and characterized by single crystal X-ray structure analysis and powder diffraction. The Ho2Ni3 complex crystallizes as monoclinic crystals in the space group P21/c. The channels and cavities, appearing in the crystal packing of the complex molecules, are occupied by a varying amount of non-coordinated water molecules. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 360 KW - lanthanides KW - holmium(III) KW - 1,2-dithiooxalate KW - crystal structure KW - nickel(II) Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-400598 ER - TY - THES A1 - Witt, Barbara T1 - Toxicological characterization of lipid-soluble arsenic species in human brain cells Y1 - 2017 ER - TY - GEN A1 - Adamovich, Sergey N. A1 - Mirskova, Anna N. A1 - Mirskov, Rudolf G. A1 - Schilde, Uwe T1 - Synthesis and crystal structure of 1,4,10,13-tetraoxa-7,16-diazoniumcyclo-octadecane bis(4-chloro-2-methyl-phenoxyacetate) N2 - The title compound was prepared by the reaction of 1,4,10,13-tetraoxa-7,16-diazacyclo-octadecane with 4-chloro-2-methyl-phenoxyacetic acid in a ratio of 1:2. The structure has been proved by the data of elemental analysis, IR spectroscopy, NMR ( 1 H, 13 C) technique and by X-ray diffraction analysis. Intermolecular hydrogen bonds between the azonium protons and oxygen atoms of the carboxylate groups were found. Immunoactive properties of the title compound have been screened. The compound has the ability to suppress spontaneous and Con A-stimulated cell proliferation in vitro and therefore can be considered as immunodepressant. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 369 KW - salts Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-400905 ER - TY - JOUR A1 - Klauß, André A1 - Conrad, Florian A1 - Hille, Carsten T1 - Binary phase masks for easy system alignment and basic aberration sensing with spatial light modulators in STED microscopy JF - Scientific reports Y1 - 2017 U6 - https://doi.org/10.1038/s41598-017-15967-5 SN - 2045-2322 VL - 7 PB - Nature Publ. Group CY - London ER -