TY - JOUR A1 - Kurzke, Henning A1 - Kiethe, Jan A1 - Heuer, Axel A1 - Jechow, Andreas T1 - Frequency doubling of incoherent light from a superluminescent diode in a periodically poled lithium niobate waveguide crystal JF - Laser physics letters N2 - The amplified spontaneous emission from a superluminescent diode was frequency doubled in a periodically poled lithium niobate waveguide crystal. The temporally incoherent radiation of such a superluminescent diode is characterized by a relatively broad spectral bandwidth and thermal-like photon statistics, as the measured degree of second order coherence, g((2))(0)= 1.9 +/- 0.1, indicates. Despite the non-optimized scenario in the spectral domain, we achieve six orders of magnitude higher conversion efficiency than previously reported with truly incoherent light. This is possible by using single spatial mode radiation and quasi phase matched material with a waveguide architecture. This work is a principle step towards efficient frequency conversion of temporally incoherent radiation in one spatial mode to access wavelengths where no radiation from superluminescent diodes is available, especially with tailored quasi phase matched crystals. The frequency doubled light might find application in imaging, metrology and quantum optics experiments. KW - nonlinear frequency conversion KW - periodically poled material KW - waveguides KW - incoherent radiation Y1 - 2017 U6 - https://doi.org/10.1088/1612-202X/aa6889 SN - 1612-2011 SN - 1612-202X VL - 14 PB - IOP Publ. CY - Bristol ER - TY - BOOK A1 - Jung, Carl Christoph T1 - Lichtinduzierte Generierung und Charakterisierung optischer Anisotropie. - [überarb. Diss.] N2 - Eine Nutzung der optischen Anisotropie dünner Schichten ist vor allem für die Displaytechnologie, die optische Datenspeicherung und für optische Sicherheitselemente von hoher Bedeutung. Diese Doktorarbeit befasst sich mit theoretischen und experimentellen Untersuchung von dreidimensionaler Anisotropie und dabei insbesondere mit der Untersuchung von lichtinduzierter dreidimensionaler Anisotropie in organischen dünnen Polymer-Schichten. Die gewonnenen Erkentnisse und entwickelten Methoden können wertvolle Beiträge für Optimierungsprozesse, wie bei der Kompensation der Blickwinkelabhängigkeit von Flüssigkristall-Displays, liefern. Die neue Methode der Immersions-Transmissions-Ellipsometrie (ITE) zur Untersuchung von dünneren Schichten wurde im Rahmen dieser Dissertation entwickelt. Diese Methode gestattet es, in Kombination mit konventioneller Reflexions- und Transmissionsellipsometrie, die absoluten dreidimensionalen Brechungsindices einer biaxialen Schicht zu bestimmen. Erstmals gelang es damit, das dreidimensionale Brechungsindexellipsoid von transparenten, dünneren (150 nm) Filmen hochgenau (drei Stellen hinter dem Komma) zu bestimmen. Die ITE-Methode hat demzufolge das Potential, auch bei noch dünneren Schichten mit Gewinn eingesetzt werden zu können. Die lichtinduzierte Generierung von dreidimensionaler Anisotropie wurde in dünnen Schichten von azobenzenhaltigen und zimtsäurehaltigen, amorphen und flüssig-kristallinen Homo- und Copolymeren untersucht. Erstmals wurden quantitative Untersuchungen zur Änderung von lichtinduzierten, dreidimensionalen Anisotropien in dünnen Schichten von azobenzenhaltigen und zimtsäurehaltigen Polymeren bei Tempern oberhalb der Glastemperatur durchgeführt. Bei vielen der untersuchten Polymere war die dreidimensionale Ordnung nach dem Bestrahlen mit polarisiertem Licht und anschließendem Tempern oberhalb der Glastemperatur scheinbar von der Schichtdicke abhängig. Die Ursache liegt wohl in der, mit der neuentwickelten ITE-Methode detektierten, planaren Ausgangsorientierung der aufgeschleuderten dünneren Schichten. Um Verkippungs-Gradienten in dickeren Polymerschichten in ihrem Verlauf zu bestimmen, wurde eine spezielle Methode unter Benutzung der Wellenleitermoden-Spektroskopie entwickelt. Quantenchemisch bestimmte, maximal induzierbare Doppelbrechungen in flüssig-kristallinen Polymeren wurden mit den experimentell gefundenen Ordnungen verglichen. N2 - The optical anisotropy of thin films is of great interest mainly in the display technology, the optical data storage and for optical security elements. The topic of this thesis was the theoretical and experimental investigation of three-dimensional anisotropy and especially the investigation of light-induced three-dimensional anisotropy in thin organic polymer films. The results and newly developed methods can contribute significantly to technical optimisation processes, e. g. for the compensation of the viewing angle dependence of liquid crystal displays. The new method of immersion-transmission-ellipsometry (ITE) for the investigation of thinner layers was developed in the course of this PhD. The new method allows to determine the absolute three-dimensional refractive indices of a biaxial film. For the first time it has been possible to determine the three-dimensional indicatrix of transparent, 150 nm thin films with an accuracy of three digits after the decimal point. The ITE-method therefore has the potential to be used for the investigation of even thinner films. The light-induced generation of three-dimensional anisotropy was investigated in thin films of azobenzene-containing and cinnamate containing, amorphous and liquid crystalline homo- and copolymers. For the first time, quantitative investigations of the changes of light-induced, three-dimensional anisotropies in thin films of azobenzene containing and cinnamate containing polymers, that were brought about by annealing above the glass transition temperatures, were carried out. For many of the investigated polymers the three-dimensional order after irradiation with polarised light and subsequent annealing above the glass transition temperature seemed to be dependent on the film thickness. The reason could be the planar initial order of the spin-coated thinner films, which was detected with the new ITE-method. For the characterisation of tilt gradients in thicker polymer films a special method using waveguide spectroscopy was developed. Quantum chemically determined maximal values of inducible birefringence were compared with the experimentally determined values. KW - Anisotropie KW - Photoorientierung KW - Photoalignment KW - dünne Schichten KW - 3D KW - Ellipsometrie KW - Kompensatoren KW - Wellenleiter KW - Displays KW - Fluoreszenz KW - anisotropy KW - photo-orientation KW - photoalignment KW - thin films KW - 3D KW - ellipsometry KW - compensation films KW - waveguides KW - displays KW - fluorescence Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0001501 ER - TY - THES A1 - Jung, Carl Christoph T1 - Lichtinduzierte Generierung und Charakterisierung optischer Anisotropie N2 - Eine Nutzung der optischen Anisotropie dünner Schichten ist vor allem für die Displaytechnologie, die optische Datenspeicherung und für optische Sicherheitselemente von hoher Bedeutung. Diese Doktorarbeit befasst sich mit theoretischen und experimentellen Untersuchung von dreidimensionaler Anisotropie und dabei insbesondere mit der Untersuchung von lichtinduzierter dreidimensionaler Anisotropie in organischen dünnen Polymer-Schichten. Die gewonnenen Erkentnisse und entwickelten Methoden können wertvolle Beiträge für Optimierungsprozesse, wie bei der Kompensation der Blickwinkelabhängigkeit von Flüssigkristall-Displays, liefern. Die neue Methode der Immersions-Transmissions-Ellipsometrie (ITE) zur Untersuchung von dünneren Schichten wurde im Rahmen dieser Dissertation entwickelt. Diese Methode gestattet es, in Kombination mit konventioneller Reflexions- und Transmissionsellipsometrie, die absoluten dreidimensionalen Brechungsindices einer biaxialen Schicht zu bestimmen. Erstmals gelang es damit, das dreidimensionale Brechungsindexellipsoid von transparenten, dünneren (150 nm) Filmen hochgenau (drei Stellen hinter dem Komma) zu bestimmen. Die ITE-Methode hat demzufolge das Potential, auch bei noch dünneren Schichten mit Gewinn eingesetzt werden zu können. Die lichtinduzierte Generierung von dreidimensionaler Anisotropie wurde in dünnen Schichten von azobenzenhaltigen und zimtsäurehaltigen, amorphen und flüssig-kristallinen Homo- und Copolymeren untersucht. Erstmals wurden quantitative Untersuchungen zur Änderung von lichtinduzierten, dreidimensionalen Anisotropien in dünnen Schichten von azobenzenhaltigen und zimtsäurehaltigen Polymeren bei Tempern oberhalb der Glastemperatur durchgeführt. Bei vielen der untersuchten Polymere war die dreidimensionale Ordnung nach dem Bestrahlen mit polarisiertem Licht und anschließendem Tempern oberhalb der Glastemperatur scheinbar von der Schichtdicke abhängig. Die Ursache liegt wohl in der, mit der neuentwickelten ITE-Methode detektierten, planaren Ausgangsorientierung der aufgeschleuderten dünneren Schichten. Um Verkippungs-Gradienten in dickeren Polymerschichten in ihrem Verlauf zu bestimmen, wurde eine spezielle Methode unter Benutzung der Wellenleitermoden-Spektroskopie entwickelt. Quantenchemisch bestimmte, maximal induzierbare Doppelbrechungen in flüssig-kristallinen Polymeren wurden mit den experimentell gefundenen Ordnungen verglichen. N2 - The optical anisotropy of thin films is of great interest mainly in the display technology, the optical data storage and for optical security elements. The topic of this thesis was the theoretical and experimental investigation of three-dimensional anisotropy and especially the investigation of light-induced three-dimensional anisotropy in thin organic polymer films. The results and newly developed methods can contribute significantly to technical optimisation processes, e. g. for the compensation of the viewing angle dependence of liquid crystal displays. The new method of immersion-transmission-ellipsometry (ITE) for the investigation of thinner layers was developed in the course of this PhD. The new method allows to determine the absolute three-dimensional refractive indices of a biaxial film. For the first time it has been possible to determine the three-dimensional indicatrix of transparent, 150 nm thin films with an accuracy of three digits after the decimal point. The ITE-method therefore has the potential to be used for the investigation of even thinner films. The light-induced generation of three-dimensional anisotropy was investigated in thin films of azobenzene-containing and cinnamate containing, amorphous and liquid crystalline homo- and copolymers. For the first time, quantitative investigations of the changes of light-induced, three-dimensional anisotropies in thin films of azobenzene containing and cinnamate containing polymers, that were brought about by annealing above the glass transition temperatures, were carried out. For many of the investigated polymers the three-dimensional order after irradiation with polarised light and subsequent annealing above the glass transition temperature seemed to be dependent on the film thickness. The reason could be the planar initial order of the spin-coated thinner films, which was detected with the new ITE-method. For the characterisation of tilt gradients in thicker polymer films a special method using waveguide spectroscopy was developed. Quantum chemically determined maximal values of inducible birefringence were compared with the experimentally determined values. KW - Anisotropie KW - Photoorientierung KW - Photoalignment KW - dünne Schichten KW - 3D KW - Ellipsometrie KW - Kompensatoren KW - Wellenleiter KW - Displays KW - Fluoreszenz KW - anisotropy KW - photo-orientation KW - photoalignment KW - thin films KW - 3D KW - ellipsometry KW - compensation films KW - waveguides KW - displays KW - fluorescence Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0001390 ER -