TY - JOUR A1 - Masson, Torsten A1 - Bamberg, Sebastian A1 - Stricker, Michael A1 - Heidenreich, Anna T1 - "We can help ourselves": does community resilience buffer against the negative impact of flooding on mental health? JF - Natural hazards and earth system sciences N2 - Empirical evidence of the relationship between social support and post-disaster mental health provides support for a general beneficial effect of social support (main-effect model; Wheaton, 1985). From a theoretical perspective, a buffering effect of social support on the negative relationship between disaster-related stress and mental health also seems plausible (stress-buffering model; Wheaton, 1985). Previous studies, however, (a) have paid less attention to the buffering effect of social support and (b) have mainly relied on interpersonal support (but not collective-level support such as community resilience) when investigating this issue. This previous work might have underestimated the effect of support on post-disaster mental health. Building on a sample of residents in Germany recently affected by flooding (N = 118), we show that community resilience to flooding (but not general interpersonal social support) buffered against the negative effects of flooding on post-disaster mental health. The results support the stress-buffering model and call for a more detailed look at the relationship between support and resilience and post-disaster adjustment, including collective-level variables. Y1 - 2019 U6 - https://doi.org/10.5194/nhess-19-2371-2019 SN - 1561-8633 SN - 1684-9981 VL - 19 IS - 11 SP - 2371 EP - 2384 PB - Copernicus CY - Göttingen ER - TY - CHAP A1 - Thorau, Christian T1 - "What ought to be heard" : touristic listening and the guided ear T2 - The Oxford handbook of music listening in the 19th and 20th centuries Y1 - 2019 SN - 978-0-19-046696-1 SP - 207 EP - 227 PB - Oxford University Press CY - New York ER - TY - JOUR A1 - Schwarzenthal, Miriam A1 - Juang, Linda P. A1 - Schachner, Maja Katharina A1 - van de Vijver, Fons J. R. T1 - "When birds of a different feather flock together" - intercultural socialization in adolescents’ friendships JF - International Journal of Intercultural Relations N2 - We conclude that intercultural friendships are associated with important skills that are needed in increasingly multicultural societies if students experience and discuss cultural variations in these friendships. KW - Intercultural friendships KW - Socialization KW - Intercultural competence KW - Cultural intelligence KW - Adolescents Y1 - 2019 U6 - https://doi.org/10.1016/j.ijintrel.2019.07.001 SN - 0147-1767 SN - 1873-7552 VL - 72 SP - 61 EP - 75 PB - Elsevier CY - Oxford ER - TY - CHAP A1 - Brendel, Nina ED - Chang, Chew-Hung ED - Kidman, Gillian ED - Wi, Andy T1 - (How) do students reflect on sustainability? BT - a model to diagnose and foster reflective thinking about sustainability T2 - Issues in Teaching and Learning of Education for Sustainability N2 - The ability to reflect is considered an essential element of Education for Sustainable Development (ESD) and a key competence for learners and educators in ESD (UNECE Strategy for ESD, 2012). In contrast to its high importance, little is known about how reflective thinking can be identified, influenced or increased in the classroom. Therefore, the objective of this study is to address this need by developing an empirical multi-stage model designed to help educators diagnose different levels of reflective thinking and to identify factors that influence students’ reflective thinking about sustainability. Based on a 4–8-week project with grade 10 and 11 students studying sustainability, reflective thinking performance using weblogs as reflective journals was analysed. In addition, qualitative semi-structured interviews were conducted with the teachers to comprehend the learning environment and the personal value they assigned to ESD in their geography class. To determine the levels of reflective thinking achieved by the students, the study built on the work of Dewey (1933) and pre-existing multi-stage models of reflective thinking (Bain, Ballantyne, & Packer, 1999; Chen, Wei, Wu, & Uden, 2009). Using a qualitative, iterative data analysis, the study adapted the stage models to be applicable in ESD and found great differences in the students’ reflection levels. Furthermore, the study identified eight factors that influence students’ reflective thinking about sustainability. The outcomes of this study may be valuable for educators in high school and higher education, who seek to diagnose their students’ reflective thinking performance and facilitate reflection about sustainability. Y1 - 2019 SN - 978-0-429-45043-3 U6 - https://doi.org/10.4324/9780429450433 SP - 117 EP - 126 PB - Routledge CY - Abingdon ER - TY - JOUR A1 - Carlà-Uhink, Filippo T1 - (Re-)Founding Italy: The Social War, Its Aftermath and the Construction of a Roman-Italic Identity in the Roman Republic JF - History in Flux: Journal of the Department of History, Faculty of Humanities, Juraj Dobrila University of Pula N2 - The Social War (91-88 BCE) is one of the most significant episodes in Roman history: from this war, in which Rome fought against her Italic allies, emerged the elite that would lead the Republic in the last decades of its existence and that would provide the senatorial aristocracy of the early imperial age. The Italic rebels were defeated militarily, yet they achieved their political aims. As such, this war – and its elaboration and memorialization in Roman cultural memory – provides a very interesting case study about how "victory" and "defeat" are constructed discursively after a disruptive war, and how its narration is "functionalized" for a re-foundation of the civic body. KW - ancient Italy KW - ancient Rome KW - social war KW - senatorial aristocracy KW - cultural memory Y1 - 2019 UR - https://hrcak.srce.hr/230778 U6 - https://doi.org/10.32728/flux.2019.1.1 VL - 1 IS - 1 SP - 3 EP - 19 ER - TY - JOUR A1 - Wiesner-Reinhold, Melanie A1 - Barknowitz, Gitte A1 - Florian, Simone A1 - Mewis, Inga A1 - Schumacher, Fabian A1 - Schreiner, Monika A1 - Glatt, Hansruedi T1 - 1-Methoxy-3-indolylmethyl DNA adducts in six tissues, and blood protein adducts, in mice under pak choi diet: time course and persistence JF - Archives of toxicology : official journal of EUROTOX N2 - We previously showed that purified 1-methoxy-3-indolylmethyl (1-MIM) glucosinolate, a secondary plant metabolite in Brassica species, is mutagenic in various in vitro systems and forms DNA and protein adducts in mouse models. In the present study, we administered 1-MIM glucosinolate in a natural matrix to mice, by feeding a diet containing pak choi powder and extract. Groups of animals were killed after 1, 2, 4 and 8 days of pak choi diet, directly or, in the case of the 8-day treatment, after 0, 8 and 16 days of recovery with pak choi-free diet. DNA adducts [N-2-(1-MIM)-dG, N-6-(1-MIM)-dA] in six tissues, as well as protein adducts [tau N-(1-MIM)-His] in serum albumin (SA) and hemoglobin (Hb) were determined using UPLC-MS/MS with isotopically labeled internal standards. None of the samples from the 12 control animals under standard diet contained any 1-MIM adducts. All groups receiving pak choi diet showed DNA adducts in all six tissues (exception: lung of mice treated for a single day) as well as SA and Hb adducts. During the feeding period, all adduct levels continuously increased until day 8 (in the jejunum until day 4). During the 14-day recovery period, N-2-(1-MIM)-dG in liver, kidney, lung, jejunum, cecum and colon decreased to 52, 41, 59, 11, 7 and 2%, respectively, of the peak level. The time course of N-6-(1-MIM)-dA was similar. Immunohistochemical analyses indicated that cell turnover is a major mechanism of DNA adduct elimination in the intestine. In the same recovery period, protein adducts decreased more rapidly in SA than in Hb, to 0.7 and 37%, respectively, of the peak level, consistent with the differential turnover of these proteins. In conclusion, the pak choi diet lead to the formation of high levels of adducts in mice. Cell and protein turnover was a major mechanism of adduct elimination, at least in gut and blood. KW - 1-Methoxy-3-indolylmethyl glucosinolate KW - Neoglucobrassicin KW - DNA adducts KW - Blood protein adducts KW - Pak choi Y1 - 2019 U6 - https://doi.org/10.1007/s00204-019-02452-3 SN - 0340-5761 SN - 1432-0738 VL - 93 IS - 6 SP - 1515 EP - 1527 PB - Springer CY - Heidelberg ER - TY - JOUR A1 - Shainyan, Bagrat A. A1 - Suslova, Elena N. A1 - Tran Dinh Phien, A1 - Shlykov, Sergey A. A1 - Heydenreich, Matthias A1 - Kleinpeter, Erich T1 - 1-Methylthio-1-phenyl-1-silacyclohexane: Synthesis, conformational preferences in gas and solution by GED, NMR and theoretical calculations JF - Tetrahedron N2 - 1-Methylthio-1-phenyl-1-silacyclohexane 1, the first silacyclohexane with the sulfur atom at silicon, was synthesized and its molecular structure and conformational preferences studied by gas-phase electron diffraction (GED) and low temperature C-13 and Si-29 NMR spectroscopy (LT NMR). Quantum-chemical calculations were carried out both for the isolated species and solvate complexes in gas and in polar medium. The predominance of the 1-MeSaxPheq conformer in gas phase (1-Ph-eq :1-Ph-ax = 55:45, Delta G degrees = 0.13 kcal/mol) determined from GED is consistent with that measured in the freon solution by LT NMR (1-Ph-eq:1-Ph-ax = 65:35, Delta G degrees = 0.12 kcal/mol), the experimentally measured ratios being close to that estimated by quantum chemical calculations at both the DFT and MP2 levels of theory. (C) 2019 Elsevier Ltd. All rights reserved. KW - 1-Methylthio-1-phenyl-1-silacyclohexane KW - Conformational analysis KW - Gas phase electron diffraction KW - Low-temperature C-13 and Si-29 NMR KW - DFT and MP2 calculations Y1 - 2019 U6 - https://doi.org/10.1016/j.tet.2019.130677 SN - 0040-4020 VL - 75 IS - 46 PB - Elsevier CY - Oxford ER - TY - BOOK A1 - Juchler, Ingo T1 - 1989 in Berlin BT - Schauplätze der Friedlichen Revolution N2 - Als Hauptstadt der DDR war Ost-Berlin ein wichtiges Zentrum der Friedlichen Revolution von 1989. Ingo Juchler nimmt die Leserinnen und Leser mit zu den zentralen Schauplätzen der Ereignisse, wobei er den Bogen vom 17. Juni 1953 über die Protestbewegung der 1970er Jahre bis hin zu den Demonstrationen im Herbst 1989 und den Ereignissen rund um den Mauerfall schlägt. Informative Texte zu den Hintergründen, zahlreiche Abbildungen und eine Übersichtskarte machen das Buch zu einem anschaulichen Zeitreiseführer in die jüngere deutsche Geschichte. Y1 - 2019 SN - 978-3-8148-0236-7 PB - bebra CY - Berlin ER - TY - BOOK A1 - Juchler, Ingo T1 - 1989 in Deutschland BT - Schauplätze der Friedlichen Revolution N2 - Kaum ein Ereignis in der zweiten Hälfte des 20. Jahrhunderts war so bedeutsam wie die Friedliche Revolution von 1989, mit der die Bevölkerung der DDR sich vom SED - Regime befreite. Dieses Buch nimmt die Leserinnen und Leser mit zu den zentralen Schauplätzen der Protestbewegung in Deutschland – in Leipzig, Berlin, Dresden, Chemnitz, Plauen, Rostock, Potsdam, Stendal und an vielen anderen Orten. Informative Texte zu den Hintergründen der Ereignisse und umfangreiches Bildmaterial machen das Buch zu einem anschaulichen Zeitreiseführer in die jüngere deutsche Geschichte. Y1 - 2019 SN - 978-3-89809-158-9 PB - bebra CY - Berlin ER - TY - GEN A1 - Gholamrezaie, Ershad A1 - Scheck-Wenderoth, Magdalena A1 - Bott, Judith A1 - Heidbach, Oliver A1 - Strecker, Manfred T1 - 3-D crustal density model of the Sea of Marmara T2 - Postprints der Universität Potsdam Mathematisch-Naturwissenschaftliche Reihe N2 - Abstract. The Sea of Marmara, in northwestern Turkey, is a transition zone where the dextral North Anatolian Fault zone (NAFZ) propagates westward from the Anatolian Plate to the Aegean Sea Plate. The area is of interest in the context of seismic hazard of Istanbul, a metropolitan area with about 15 million inhabitants. Geophysical observations indicate that the crust is heterogeneous beneath the Marmara basin, but a detailed characterization of the crustal heterogeneities is still missing. To assess if and how crustal heterogeneities are related to the NAFZ segmentation below the Sea of Marmara, we develop new crustal-scale 3-D density models which integrate geological and seismological data and that are additionally constrained by 3-D gravity modeling. For the latter, we use two different gravity datasets including global satellite data and local marine gravity observation. Considering the two different datasets and the general non-uniqueness in potential field modeling, we suggest three possible “end-member” solutions that are all consistent with the observed gravity field and illustrate the spectrum of possible solutions. These models indicate that the observed gravitational anomalies originate from significant density heterogeneities within the crust. Two layers of sediments, one syn-kinematic and one pre-kinematic with respect to the Sea of Marmara formation are underlain by a heterogeneous crystalline crust. A felsic upper crystalline crust (average density of 2720 kgm⁻³) and an intermediate to mafic lower crystalline crust (average density of 2890 kgm⁻³) appear to be cross-cut by two large, dome-shaped mafic highdensity bodies (density of 2890 to 3150 kgm⁻³) of considerable thickness above a rather uniform lithospheric mantle (3300 kgm⁻³). The spatial correlation between two major bends of the main Marmara fault and the location of the highdensity bodies suggests that the distribution of lithological heterogeneities within the crust controls the rheological behavior along the NAFZ and, consequently, maybe influences fault segmentation and thus the seismic hazard assessment in the region. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 737 KW - North Anatolian Fault KW - Shear Zone KW - Northwestern Anatolia KW - Geomechanical Model KW - Tectonic Evolution KW - Slip Distribution KW - Middle Strand KW - Pull-Apart KW - Long-Term KW - NW Turkey Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-434661 SN - 1866-8372 IS - 737 SP - 785 EP - 807 ER - TY - JOUR A1 - Gholamrezaie, Ershad A1 - Scheck-Wenderoth, Magdalena A1 - Bott, Judith A1 - Heidbach, Oliver A1 - Strecker, Manfred T1 - 3-D crustal density model of the Sea of Marmara JF - Solid Earth N2 - Abstract. The Sea of Marmara, in northwestern Turkey, is a transition zone where the dextral North Anatolian Fault zone (NAFZ) propagates westward from the Anatolian Plate to the Aegean Sea Plate. The area is of interest in the context of seismic hazard of Istanbul, a metropolitan area with about 15 million inhabitants. Geophysical observations indicate that the crust is heterogeneous beneath the Marmara basin, but a detailed characterization of the crustal heterogeneities is still missing. To assess if and how crustal heterogeneities are related to the NAFZ segmentation below the Sea of Marmara, we develop new crustal-scale 3-D density models which integrate geological and seismological data and that are additionally constrained by 3-D gravity modeling. For the latter, we use two different gravity datasets including global satellite data and local marine gravity observation. Considering the two different datasets and the general non-uniqueness in potential field modeling, we suggest three possible “end-member” solutions that are all consistent with the observed gravity field and illustrate the spectrum of possible solutions. These models indicate that the observed gravitational anomalies originate from significant density heterogeneities within the crust. Two layers of sediments, one syn-kinematic and one pre-kinematic with respect to the Sea of Marmara formation are underlain by a heterogeneous crystalline crust. A felsic upper crystalline crust (average density of 2720 kgm⁻³) and an intermediate to mafic lower crystalline crust (average density of 2890 kgm⁻³) appear to be cross-cut by two large, dome-shaped mafic highdensity bodies (density of 2890 to 3150 kgm⁻³) of considerable thickness above a rather uniform lithospheric mantle (3300 kgm⁻³). The spatial correlation between two major bends of the main Marmara fault and the location of the highdensity bodies suggests that the distribution of lithological heterogeneities within the crust controls the rheological behavior along the NAFZ and, consequently, maybe influences fault segmentation and thus the seismic hazard assessment in the region. KW - North Anatolian Fault KW - Shear Zone KW - Northwestern Anatolia KW - Geomechanical Model KW - Tectonic Evolution KW - Slip Distribution KW - Middle Strand KW - Pull-Apart KW - Long-Term KW - NW Turkey Y1 - 2019 U6 - https://doi.org/10.5194/se-10-785-2019 SN - 1869-9510 SN - 1869-9529 VL - 10 SP - 785 EP - 807 PB - Copernicus Publ. CY - Göttingen ER - TY - JOUR A1 - Guillemoteau, Julien A1 - Simon, Francois-Xavier A1 - Hulin, Guillaume A1 - Dousteyssier, Bertrand A1 - Dacko, Marion A1 - Tronicke, Jens T1 - 3-D imaging of subsurface magnetic permeability/susceptibility with portable frequency domain electromagnetic sensors for near surface exploration JF - Geophysical journal international N2 - The in-phase response collected by portable loop-loop electromagnetic induction (EMI) sensors operating at low and moderate induction numbers (<= 1) is typically used for sensing the magnetic permeability (or susceptibility) of the subsurface. This is due to the fact that the in-phase response contains a small induction fraction and a preponderant induced magnetization fraction. The magnetization fraction follows the magneto-static equations similarly to the magnetic method but with an active magnetic source. The use of an active source offers the possibility to collect data with several loop-loop configurations, which illuminate the subsurface with different sensitivity patterns. Such multiconfiguration soundings thereby allows the imaging of subsurface magnetic permeability/susceptibility variations through an inversion procedure. This method is not affected by the remnant magnetization and theoretically overcomes the classical depth ambiguity generally encountered with passive geomagnetic data. To invert multiconfiguration in-phase data sets, we propose a novel methodology based on a full-grid 3-D multichannel deconvolution (MCD) procedure. This method allows us to invert large data sets (e.g. consisting of more than a hundred thousand of data points) for a dense voxel-based 3-D model of magnetic susceptibility subject to smoothness constraints. In this study, we first present and discuss synthetic examples of our imaging procedure, which aim at simulating realistic conditions. Finally, we demonstrate the applicability of our method to field data collected across an archaeological site in Auvergne (France) to image the foundations of a Gallo-Roman villa built with basalt rock material. Our synthetic and field data examples demonstrate the potential of the proposed inversion procedure offering new and complementary ways to interpret data sets collected with modern EMI instruments. KW - Magnetic properties KW - Controlled source electromagnetics (CSEM) KW - Electromagnetic theory KW - Environmental magnetism KW - Inverse theory Y1 - 2019 U6 - https://doi.org/10.1093/gji/ggz382 SN - 0956-540X SN - 1365-246X VL - 219 IS - 3 SP - 1773 EP - 1785 PB - Oxford Univ. Press CY - Oxford ER - TY - JOUR A1 - Gomez-Garcia, Angela Maria A1 - Meeßen, Christian A1 - Scheck-Wenderoth, Magdalena A1 - Monsalve, Gaspar A1 - Bott, Judith A1 - Bernhardt, Anne A1 - Bernal, Gladys T1 - 3-D Modeling of Vertical Gravity Gradients and the Delimitation of Tectonic Boundaries: The Caribbean Oceanic Domain as a Case Study JF - Geochemistry, geophysics, geosystems N2 - Geophysical data acquisition in oceanic domains is challenging, implying measurements with low and/or nonhomogeneous spatial resolution. The evolution of satellite gravimetry and altimetry techniques allows testing 3-D density models of the lithosphere, taking advantage of the high spatial resolution and homogeneous coverage of satellites. However, it is not trivial to discretise the source of the gravity field at different depths. Here, we propose a new method for inferring tectonic boundaries at the crustal level. As a novelty, instead of modeling the gravity anomalies and assuming a flat Earth approximation, we model the vertical gravity gradients (VGG) in spherical coordinates, which are especially sensitive to density contrasts in the upper layers of the Earth. To validate the methodology, the complex oceanic domain of the Caribbean region is studied, which includes different crustal domains with a tectonic history since Late Jurassic time. After defining a lithospheric starting model constrained by up-to-date geophysical data sets, we tested several a-priory density distributions and selected the model with the minimum misfits with respect to the VGG calculated from the EIGEN-6C4 data set. Additionally, the density of the crystalline crust was inferred by inverting the VGG field. Our methodology enabled us not only to refine, confirm, and/or propose tectonic boundaries in the study area but also to identify a new anomalous buoyant body, located in the South Lesser Antilles subduction zone, and high-density bodies along the Greater, Lesser, and Leeward Antilles forearcs. KW - Vertical Gravity Gradients KW - Gravity modelling KW - Crustal structure KW - Caribbean KW - Tectonic boundaries KW - 3D lithospheric model Y1 - 2019 U6 - https://doi.org/10.1029/2019GC008340 SN - 1525-2027 VL - 20 IS - 11 SP - 5371 EP - 5393 PB - American Geophysical Union CY - Washington ER - TY - JOUR A1 - Ibarra, Federico A1 - Liu, Sibiao A1 - Meeßen, Christian A1 - Prezzi, Claudia Beatriz A1 - Bott, Judith A1 - Scheck-Wenderoth, Magdalena A1 - Sobolev, Stephan Vladimir A1 - Strecker, Manfred T1 - 3D data-derived lithospheric structure of the Central Andes and its implications for deformation: Insights from gravity and geodynamic modelling JF - Tectonophysics : international journal of geotectonics and the geology and physics of the interior of the earth N2 - We present a new three-dimensional density model of the Central Andes characterizing the structure and composition of the lithosphere together with a geodynamic simulation subjected to continental intraplate shortening. The principal aim of this study is to assess the link between heterogeneities in the lithosphere and different deformation patterns and styles along the orogen-foreland system of the Central Andes. First, we performed a 3D integration of new geological and geophysical data with previous models through forward modelling of Bouguer anomalies. Subsequently, a geodynamic model was set-up and parametrized from the previously obtained 3D structure and composition. We do not find a unambigous correlation between the resulting density configuration and terrane boundaries proposed by other authors. Our models reproduce the observed Bouguer anomaly and deformation patterns in the foreland. We find that thin-skinned deformation in the Subandean fold-and thrust belt is controlled by a thick sedimentary layer and coeval underthrusting of thin crust of the foreland beneath the thick crust of the Andean Plateau. In the adjacent thick-skinned deformation province of the inverted Cretaceous extensional Santa Barbara System sedimentary strata are much thinner and crustal thickness transitions from greater values in the Andean to a more reduced thickness in the foreland. Our results show that deformation processes occur where the highest gradients of lithospheric strength are present between the orogen and the foreland, thus suggesting a spatial correlation between deformation and lithospheric strength. KW - Central Andes KW - Lithospheric structure KW - Gravity modelling KW - Geodynamic modelling KW - Deformation Y1 - 2019 U6 - https://doi.org/10.1016/j.tecto.2019.06.025 SN - 0040-1951 SN - 1879-3266 VL - 766 SP - 453 EP - 468 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Brell, Maximilian A1 - Segl, Karl A1 - Guanter, Luis A1 - Bookhagen, Bodo T1 - 3D hyperspectral point cloud generation BT - Fusing airborne laser scanning and hyperspectral imaging sensors for improved object-based information extraction JF - ISPRS journal of photogrammetry and remote sensing : official publication of the International Society for Photogrammetry and Remote Sensing N2 - Remote Sensing technologies allow to map biophysical, biochemical, and earth surface parameters of the land surface. Of especial interest for various applications in environmental and urban sciences is the combination of spectral and 3D elevation information. However, those two data streams are provided separately by different instruments, namely airborne laser scanner (ALS) for elevation and a hyperspectral imager (HSI) for high spectral resolution data. The fusion of ALS and HSI data can thus lead to a single data entity consistently featuring rich structural and spectral information. In this study, we present the application of fusing the first pulse return information from ALS data at a sub-decimeter spatial resolution with the lower-spatial resolution hyperspectral information available from the HSI into a hyperspectral point cloud (HSPC). During the processing, a plausible hyperspectral spectrum is assigned to every first-return ALS point. We show that the complementary implementation of spectral and 3D information at the point-cloud scale improves object-based classification and information extraction schemes. This improvements have great potential for numerous land cover mapping and environmental applications. KW - Lidar KW - Multispectral point cloud KW - Laser return intensity KW - Unmixing KW - Sharpening KW - Imaging spectroscopy KW - In-flight KW - Pixel level KW - Sensor fusion KW - Data fusion KW - Preprocessing KW - Point cloud segmentation KW - Semantic labeling Y1 - 2019 U6 - https://doi.org/10.1016/j.isprsjprs.2019.01.022 SN - 0924-2716 SN - 1872-8235 VL - 149 SP - 200 EP - 214 PB - Elsevier CY - Amsterdam ER - TY - GEN A1 - Kubatova, Brankica A1 - Hamann, Wolf-Rainer A1 - Kubat, Jiri A1 - Oskinova, Lida T1 - 3D Monte Carlo Radiative Transfer in Inhomogeneous Massive Star Winds BT - Application to Resonance Line Formation T2 - Radiative signatures from the cosmos N2 - Already for decades it has been known that the winds of massive stars are inhomogeneous (i.e. clumped). To properly model observed spectra of massive star winds it is necessary to incorporate the 3-D nature of clumping into radiative transfer calculations. In this paper we present our full 3-D Monte Carlo radiative transfer code for inhomogeneous expanding stellar winds. We use a set of parameters to describe dense as well as the rarefied wind components. At the same time, we account for non-monotonic velocity fields. We show how the 3-D density and velocity wind inhomogeneities strongly affect the resonance line formation. We also show how wind clumping can solve the discrepancy between P v and H alpha mass-loss rate diagnostics. Y1 - 2019 SN - 978-1-58381-925-8 SN - 1050-3390 VL - 519 SP - 209 EP - 212 PB - Astronomical soc pacific CY - San Fransisco ER - TY - THES A1 - Vranic, Marija T1 - 3D Structure of the biomarker hepcidin-25 in its native state T1 - 3D-Struktur des Biomarkers Hepcidin-25 im eigenen nativen Zustand N2 - Hepcidin-25 (Hep-25) plays a crucial role in the control of iron homeostasis. Since the dysfunction of the hepcidin pathway leads to multiple diseases as a result of iron imbalance, hepcidin represents a potential target for the diagnosis and treatment of disorders of iron metabolism. Despite intense research in the last decade targeted at developing a selective immunoassay for iron disorder diagnosis and treatment and better understanding the ferroportin-hepcidin interaction, questions remain. The key to resolving these underlying questions is acquiring exact knowledge of the 3D structure of native Hep-25. Since it was determined that the N-terminus, which is responsible for the bioactivity of Hep-25, contains a small Cu(II)-binding site known as the ATCUN motif, it was assumed that the Hep-25-Cu(II) complex is the native, bioactive form of the hepcidin. This structure has thus far not been elucidated in detail. Owing to the lack of structural information on metal-bound Hep-25, little is known about its possible biological role in iron metabolism. Therefore, this work is focused on structurally characterizing the metal-bound Hep-25 by NMR spectroscopy and molecular dynamics simulations. For the present work, a protocol was developed to prepare and purify properly folded Hep-25 in high quantities. In order to overcome the low solubility of Hep-25 at neutral pH, we introduced the C-terminal DEDEDE solubility tag. The metal binding was investigated through a series of NMR spectroscopic experiments to identify the most affected amino acids that mediate metal coordination. Based on the obtained NMR data, a structural calculation was performed in order to generate a model structure of the Hep-25-Ni(II) complex. The DEDEDE tag was excluded from the structural calculation due to a lack of NMR restraints. The dynamic nature and fast exchange of some of the amide protons with solvent reduced the overall number of NMR restraints needed for a high-quality structure. The NMR data revealed that the 20 Cterminal Hep-25 amino acids experienced no significant conformational changes, compared to published results, as a result of a pH change from pH 3 to pH 7 and metal binding. A 3D model of the Hep-25-Ni(II) complex was constructed from NMR data recorded for the hexapeptideNi(II) complex and Hep-25-DEDEDE-Ni(II) complex in combination with the fixed conformation of 19 C-terminal amino acids. The NMR data of the Hep-25-DEDEDE-Ni(II) complex indicates that the ATCUN motif moves independently from the rest of the structure. The 3D model structure of the metal-bound Hep-25 allows for future works to elucidate hepcidin’s interaction with its receptor ferroportin and should serve as a starting point for the development of antibodies with improved selectivity. N2 - Hepcidin-25 (Hep-25) spielt eine entscheidende Rolle bei der Kontrolle der Eisenhomöostase. Da die Dysfunktion des Hepcidin-Signalweges aufgrund des Eisenungleichgewichts zu mehreren Krankheiten führt, stellt Hepcidin ein potenzielles Ziel für die Diagnose und Behandlung von Störungen des Eisenstoffwechsels dar. Trotz intensiver Forschung in den letzten zehn Jahren, die darauf abzielte, einen selektiven Immunoassay für die Diagnose und Behandlung von Eisenerkrankungen zu entwickeln und die Ferroportin-Hepcidin-Interaktion besser zu verstehen, bleiben Fragen offen. Der Schlüssel zur Lösung dieser grundlegenden Fragen liegt darin, genaue Kenntnisse über die 3D-Struktur des nativen Hep-25 zu erlangen. Da festgestellt wurde, dass der N-Terminus, der für die Bioaktivität von Hep-25 verantwortlich ist, eine kleine Cu(II)-Bindungsstelle enthält, die als ATCUN-Motiv bekannt ist, wurde angenommen, dass der Hep-25- Cu(II)-Komplex die native, bioaktive Form des Hepcidins ist. Diese Struktur ist bisher noch nicht im Detail untersucht worden. Aufgrund fehlender Strukturinformationen über metallgebundenes Hep-25 ist wenig über seine mögliche biologische Rolle im Eisenstoffwechsel bekannt. Daher konzentriert sich diese Arbeit auf die strukturelle Charakterisierung des metallgebundenen Hep-25 mittels NMR-Spektroskopie und Molekulardynamik Simulationen. In der vorliegenden Arbeit wurde ein Protokoll zur Präparation und Reinigung von korrekt gefaltetem Hep-25 in hohen Mengen entwickelt. Um das Problem der geringen Löslichkeit von Hep-25 bei neutralem pH-Wert zu überwinden, haben wir einen C-terminalen DEDEDEDE Löslichkeits-Tag eingeführt. Die Metallbindung wurde durch eine Reihe von NMRspektroskopischen Experimenten untersucht, um die Aminosäuren zu identifizieren, welche an der Metallkoordination beteiligt sind. Basierend auf den erhaltenen NMR-Daten wurde eine Strukturberechnung durchgeführt, um eine Modellstruktur des Hep-25-Ni(II)-Komplexes zu erzeugen. Der DEDEDE-Tag wurde aufgrund fehlender NMR- restraints von der Strukturberechnung ausgeschlossen. Die dynamische Natur und der schnelle Austausch eines Teils der Amid-Protonen mit dem Lösungsmittel reduzierten die Gesamtzahl der NMR- restraints, die für eine hochwertige Struktur erforderlich waren. Die NMR-Daten zeigten, dass die 20 C-terminalen Hep-25-Aminosäuren keine signifikanten Konformationsänderungen als Folge eines pH-Wechsels von pH 3 auf pH 7 und einer Metallbindung erfuhren. Ein 3D-Modell des Hep-25-Ni(II)-Komplexes wurde aus den NMR-Daten des Hexapeptid-Ni(II)-Komplexes und des Hep-25-DEDEDE-Ni(II)-Komplexes in Kombination mit der bekannten Konformation der 19 C-terminalen Aminosäuren erstellt. Die NMR-Daten des Hep-25-DEDEDE-Ni(II)Komplexes zeigen, dass sich das Ni-ATCUN-Motiv unabhängig vom C-Terminus bewegt. Die 3D-Modellstruktur des metallgebundenen Hep-25 ermöglicht es, in Zukunft die Interaktion von Hepcidin mit seinem Rezeptor Ferroportin zu untersuchen und soll als Ausgangspunkt für die Entwicklung von Antikörpern mit verbesserter Selektivität dienen. KW - iron KW - hepcidin KW - peptide KW - metal KW - binding KW - NMR KW - Eisen KW - Hepcidin KW - Peptid KW - Metall KW - Bindung KW - NMR Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-459295 ER - TY - JOUR A1 - Brechenmacher, Thomas T1 - 70 Jahre Israel BT - Die Shoah als Faktor der Staatsgründung? JF - Historisch-politische Mitteilungen : Archiv für Christlich-Demokratische Politik N2 - Schon kurz nach dem Zweiten Weltkrieg wurde die These vertreten, die Shoah sei ein wichtiger, wenn nicht gar entscheidender Faktor für die Gründung des Staates Israel gewesen. Der Essay arbeitet heraus, dass der nationalsozialistische Judenmord sicherlich eine moralisch-legitimatorische Funktion gehabt hat, ein unmittelbarer kausaler Zusammenhang mit der Staatsgründung aber nicht nachzuweisen ist. Y1 - 2019 SN - 978-3-412-51847-9 SN - 978-3-412-51845-5 VL - 26 SP - 5 EP - 15 PB - Böhlau CY - Wien ER - TY - JOUR A1 - Zhang, Shuhao A1 - Bramski, Julia A1 - Tutus, Murat A1 - Pietruszka, Jörg A1 - Böker, Alexander A1 - Reinicke, Stefan T1 - A Biocatalytically Active Membrane Obtained from Immobilization of 2-Deoxy-D-ribose-5-phosphate Aldolase on a Porous Support JF - ACS applied materials & interfaces N2 - Aldol reactions play an important role in organic synthesis, as they belong to the class of highly beneficial C-C-linking reactions. Aldol-type reactions can be efficiently and stereoselectively catalyzed by the enzyme 2-deoxy-D-ribose-5-phosphate aldolase (DERA) to gain key intermediates for pharmaceuticals such as atorvastatin. The immobilization of DERA would open the opportunity for a continuous operation mode which gives access to an efficient, large-scale production of respective organic intermediates. In this contribution, we synthesize and utilize DERA/polymer conjugates for the generation and fixation of a DERA bearing thin film on a polymeric membrane support. The conjugation strongly increases the tolerance of the enzyme toward the industrial relevant substrate acetaldehyde while UV-cross-linkable groups along the conjugated polymer chains provide the opportunity for covalent binding to the support. First, we provide a thorough characterization of the conjugates followed by immobilization tests on representative, nonporous cycloolefinic copolymer supports. Finally, immobilization on the target supports constituted of polyacrylonitrile (PAN) membranes is performed, and the resulting enzymatically active membranes are implemented in a simple membrane module setup for the first assessment of biocatalytic performance in the continuous operation mode using the combination hexanal/acetaldehyde as the substrate. KW - 2-deoxy-D-ribose-5-phoshphate aldolase KW - enzyme immobilization KW - enzymatically active membrane KW - enzyme/polymer conjugate KW - self-assembly Y1 - 2019 U6 - https://doi.org/10.1021/acsami.9b12029 SN - 1944-8244 SN - 1944-8252 VL - 11 IS - 37 SP - 34441 EP - 34453 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Wuttke, Matthias A1 - Li, Yong A1 - Li, Man A1 - Sieber, Karsten B. A1 - Feitosa, Mary F. A1 - Gorski, Mathias A1 - Tin, Adrienne A1 - Wang, Lihua A1 - Chu, Audrey Y. A1 - Hoppmann, Anselm A1 - Kirsten, Holger A1 - Giri, Ayush A1 - Chai, Jin-Fang A1 - Sveinbjornsson, Gardar A1 - Tayo, Bamidele O. A1 - Nutile, Teresa A1 - Fuchsberger, Christian A1 - Marten, Jonathan A1 - Cocca, Massimiliano A1 - Ghasemi, Sahar A1 - Xu, Yizhe A1 - Horn, Katrin A1 - Noce, Damia A1 - Van der Most, Peter J. A1 - Sedaghat, Sanaz A1 - Yu, Zhi A1 - Akiyama, Masato A1 - Afaq, Saima A1 - Ahluwalia, Tarunveer Singh A1 - Almgren, Peter A1 - Amin, Najaf A1 - Arnlov, Johan A1 - Bakker, Stephan J. L. A1 - Bansal, Nisha A1 - Baptista, Daniela A1 - Bergmann, Sven A1 - Biggs, Mary L. A1 - Biino, Ginevra A1 - Boehnke, Michael A1 - Boerwinkle, Eric A1 - Boissel, Mathilde A1 - Böttinger, Erwin A1 - Boutin, Thibaud S. A1 - Brenner, Hermann A1 - Brumat, Marco A1 - Burkhardt, Ralph A1 - Butterworth, Adam S. A1 - Campana, Eric A1 - Campbell, Archie A1 - Campbell, Harry A1 - Canouil, Mickael A1 - Carroll, Robert J. A1 - Catamo, Eulalia A1 - Chambers, John C. A1 - Chee, Miao-Ling A1 - Chee, Miao-Li A1 - Chen, Xu A1 - Cheng, Ching-Yu A1 - Cheng, Yurong A1 - Christensen, Kaare A1 - Cifkova, Renata A1 - Ciullo, Marina A1 - Concas, Maria Pina A1 - Cook, James P. A1 - Coresh, Josef A1 - Corre, Tanguy A1 - Sala, Cinzia Felicita A1 - Cusi, Daniele A1 - Danesh, John A1 - Daw, E. Warwick A1 - De Borst, Martin H. A1 - De Grandi, Alessandro A1 - De Mutsert, Renee A1 - De Vries, Aiko P. J. A1 - Degenhardt, Frauke A1 - Delgado, Graciela A1 - Demirkan, Ayse A1 - Di Angelantonio, Emanuele A1 - Dittrich, Katalin A1 - Divers, Jasmin A1 - Dorajoo, Rajkumar A1 - Eckardt, Kai-Uwe A1 - Ehret, Georg A1 - Elliott, Paul A1 - Endlich, Karlhans A1 - Evans, Michele K. A1 - Felix, Janine F. A1 - Foo, Valencia Hui Xian A1 - Franco, Oscar H. A1 - Franke, Andre A1 - Freedman, Barry I. A1 - Freitag-Wolf, Sandra A1 - Friedlander, Yechiel A1 - Froguel, Philippe A1 - Gansevoort, Ron T. A1 - Gao, He A1 - Gasparini, Paolo A1 - Gaziano, J. Michael A1 - Giedraitis, Vilmantas A1 - Gieger, Christian A1 - Girotto, Giorgia A1 - Giulianini, Franco A1 - Gogele, Martin A1 - Gordon, Scott D. A1 - Gudbjartsson, Daniel F. A1 - Gudnason, Vilmundur A1 - Haller, Toomas A1 - Hamet, Pavel A1 - Harris, Tamara B. A1 - Hartman, Catharina A. A1 - Hayward, Caroline A1 - Hellwege, Jacklyn N. A1 - Heng, Chew-Kiat A1 - Hicks, Andrew A. A1 - Hofer, Edith A1 - Huang, Wei A1 - Hutri-Kahonen, Nina A1 - Hwang, Shih-Jen A1 - Ikram, M. Arfan A1 - Indridason, Olafur S. A1 - Ingelsson, Erik A1 - Ising, Marcus A1 - Jaddoe, Vincent W. V. A1 - Jakobsdottir, Johanna A1 - Jonas, Jost B. A1 - Joshi, Peter K. A1 - Josyula, Navya Shilpa A1 - Jung, Bettina A1 - Kahonen, Mika A1 - Kamatani, Yoichiro A1 - Kammerer, Candace M. A1 - Kanai, Masahiro A1 - Kastarinen, Mika A1 - Kerr, Shona M. A1 - Khor, Chiea-Chuen A1 - Kiess, Wieland A1 - Kleber, Marcus E. A1 - Koenig, Wolfgang A1 - Kooner, Jaspal S. A1 - Korner, Antje A1 - Kovacs, Peter A1 - Kraja, Aldi T. A1 - Krajcoviechova, Alena A1 - Kramer, Holly A1 - Kramer, Bernhard K. A1 - Kronenberg, Florian A1 - Kubo, Michiaki A1 - Kuhnel, Brigitte A1 - Kuokkanen, Mikko A1 - Kuusisto, Johanna A1 - La Bianca, Martina A1 - Laakso, Markku A1 - Lange, Leslie A. A1 - Langefeld, Carl D. A1 - Lee, Jeannette Jen-Mai A1 - Lehne, Benjamin A1 - Lehtimaki, Terho A1 - Lieb, Wolfgang A1 - Lim, Su-Chi A1 - Lind, Lars A1 - Lindgren, Cecilia M. A1 - Liu, Jun A1 - Liu, Jianjun A1 - Loeffler, Markus A1 - Loos, Ruth J. F. A1 - Lucae, Susanne A1 - Lukas, Mary Ann A1 - Lyytikainen, Leo-Pekka A1 - Magi, Reedik A1 - Magnusson, Patrik K. E. A1 - Mahajan, Anubha A1 - Martin, Nicholas G. A1 - Martins, Jade A1 - Marz, Winfried A1 - Mascalzoni, Deborah A1 - Matsuda, Koichi A1 - Meisinger, Christa A1 - Meitinger, Thomas A1 - Melander, Olle A1 - Metspalu, Andres A1 - Mikaelsdottir, Evgenia K. A1 - Milaneschi, Yuri A1 - Miliku, Kozeta A1 - Mishra, Pashupati P. A1 - Program, V. A. Million Veteran A1 - Mohlke, Karen L. A1 - Mononen, Nina A1 - Montgomery, Grant W. A1 - Mook-Kanamori, Dennis O. A1 - Mychaleckyj, Josyf C. A1 - Nadkarni, Girish N. A1 - Nalls, Mike A. A1 - Nauck, Matthias A1 - Nikus, Kjell A1 - Ning, Boting A1 - Nolte, Ilja M. A1 - Noordam, Raymond A1 - Olafsson, Isleifur A1 - Oldehinkel, Albertine J. A1 - Orho-Melander, Marju A1 - Ouwehand, Willem H. A1 - Padmanabhan, Sandosh A1 - Palmer, Nicholette D. A1 - Palsson, Runolfur A1 - Penninx, Brenda W. J. H. A1 - Perls, Thomas A1 - Perola, Markus A1 - Pirastu, Mario A1 - Pirastu, Nicola A1 - Pistis, Giorgio A1 - Podgornaia, Anna I. A1 - Polasek, Ozren A1 - Ponte, Belen A1 - Porteous, David J. A1 - Poulain, Tanja A1 - Pramstaller, Peter P. A1 - Preuss, Michael H. A1 - Prins, Bram P. A1 - Province, Michael A. A1 - Rabelink, Ton J. A1 - Raffield, Laura M. A1 - Raitakari, Olli T. A1 - Reilly, Dermot F. A1 - Rettig, Rainer A1 - Rheinberger, Myriam A1 - Rice, Kenneth M. A1 - Ridker, Paul M. A1 - Rivadeneira, Fernando A1 - Rizzi, Federica A1 - Roberts, David J. A1 - Robino, Antonietta A1 - Rossing, Peter A1 - Rudan, Igor A1 - Rueedi, Rico A1 - Ruggiero, Daniela A1 - Ryan, Kathleen A. A1 - Saba, Yasaman A1 - Sabanayagam, Charumathi A1 - Salomaa, Veikko A1 - Salvi, Erika A1 - Saum, Kai-Uwe A1 - Schmidt, Helena A1 - Schmidt, Reinhold A1 - Ben Schottker, A1 - Schulz, Christina-Alexandra A1 - Schupf, Nicole A1 - Shaffer, Christian M. A1 - Shi, Yuan A1 - Smith, Albert V. A1 - Smith, Blair H. A1 - Soranzo, Nicole A1 - Spracklen, Cassandra N. A1 - Strauch, Konstantin A1 - Stringham, Heather M. A1 - Stumvoll, Michael A1 - Svensson, Per O. A1 - Szymczak, Silke A1 - Tai, E-Shyong A1 - Tajuddin, Salman M. A1 - Tan, Nicholas Y. Q. A1 - Taylor, Kent D. A1 - Teren, Andrej A1 - Tham, Yih-Chung A1 - Thiery, Joachim A1 - Thio, Chris H. L. A1 - Thomsen, Hauke A1 - Thorleifsson, Gudmar A1 - Toniolo, Daniela A1 - Tonjes, Anke A1 - Tremblay, Johanne A1 - Tzoulaki, Ioanna A1 - Uitterlinden, Andre G. A1 - Vaccargiu, Simona A1 - Van Dam, Rob M. A1 - Van der Harst, Pim A1 - Van Duijn, Cornelia M. A1 - Edward, Digna R. Velez A1 - Verweij, Niek A1 - Vogelezang, Suzanne A1 - Volker, Uwe A1 - Vollenweider, Peter A1 - Waeber, Gerard A1 - Waldenberger, Melanie A1 - Wallentin, Lars A1 - Wang, Ya Xing A1 - Wang, Chaolong A1 - Waterworth, Dawn M. A1 - Bin Wei, Wen A1 - White, Harvey A1 - Whitfield, John B. A1 - Wild, Sarah H. A1 - Wilson, James F. A1 - Wojczynski, Mary K. A1 - Wong, Charlene A1 - Wong, Tien-Yin A1 - Xu, Liang A1 - Yang, Qiong A1 - Yasuda, Masayuki A1 - Yerges-Armstrong, Laura M. A1 - Zhang, Weihua A1 - Zonderman, Alan B. A1 - Rotter, Jerome I. A1 - Bochud, Murielle A1 - Psaty, Bruce M. A1 - Vitart, Veronique A1 - Wilson, James G. A1 - Dehghan, Abbas A1 - Parsa, Afshin A1 - Chasman, Daniel I. A1 - Ho, Kevin A1 - Morris, Andrew P. A1 - Devuyst, Olivier A1 - Akilesh, Shreeram A1 - Pendergrass, Sarah A. A1 - Sim, Xueling A1 - Boger, Carsten A. A1 - Okada, Yukinori A1 - Edwards, Todd L. A1 - Snieder, Harold A1 - Stefansson, Kari A1 - Hung, Adriana M. A1 - Heid, Iris M. A1 - Scholz, Markus A1 - Teumer, Alexander A1 - Kottgen, Anna A1 - Pattaro, Cristian T1 - A catalog of genetic loci associated with kidney function from analyses of a million individuals JF - Nature genetics N2 - Chronic kidney disease (CKD) is responsible for a public health burden with multi-systemic complications. Through transancestry meta-analysis of genome-wide association studies of estimated glomerular filtration rate (eGFR) and independent replication (n = 1,046,070), we identified 264 associated loci (166 new). Of these,147 were likely to be relevant for kidney function on the basis of associations with the alternative kidney function marker blood urea nitrogen (n = 416,178). Pathway and enrichment analyses, including mouse models with renal phenotypes, support the kidney as the main target organ. A genetic risk score for lower eGFR was associated with clinically diagnosed CKD in 452,264 independent individuals. Colocalization analyses of associations with eGFR among 783,978 European-ancestry individuals and gene expression across 46 human tissues, including tubulo-interstitial and glomerular kidney compartments, identified 17 genes differentially expressed in kidney. Fine-mapping highlighted missense driver variants in 11 genes and kidney-specific regulatory variants. These results provide a comprehensive priority list of molecular targets for translational research. Y1 - 2019 U6 - https://doi.org/10.1038/s41588-019-0407-x SN - 1061-4036 SN - 1546-1718 VL - 51 IS - 6 SP - 957 EP - + PB - Nature Publ. Group CY - New York ER - TY - GEN A1 - Halfpap, Stefan A1 - Schlosser, Rainer T1 - A Comparison of Allocation Algorithms for Partially Replicated Databases T2 - 2019 IEEE 35th International Conference on Data Engineering (ICDE) N2 - Increasing demand for analytical processing capabilities can be managed by replication approaches. However, to evenly balance the replicas' workload shares while at the same time minimizing the data replication factor is a highly challenging allocation problem. As optimal solutions are only applicable for small problem instances, effective heuristics are indispensable. In this paper, we test and compare state-of-the-art allocation algorithms for partial replication. By visualizing and exploring their (heuristic) solutions for different benchmark workloads, we are able to derive structural insights and to detect an algorithm's strengths as well as its potential for improvement. Further, our application enables end-to-end evaluations of different allocations to verify their theoretical performance. Y1 - 2019 SN - 978-1-5386-7474-1 SN - 978-1-5386-7475-8 U6 - https://doi.org/10.1109/ICDE.2019.00226 SN - 1084-4627 SN - 2375-026X SN - 1063-6382 SP - 2008 EP - 2011 PB - IEEE CY - New York ER - TY - JOUR A1 - Baroni, Gabriele A1 - Schalge, Bernd A1 - Rakovec, Oldrich A1 - Kumar, Rohini A1 - Schüler, Lennart A1 - Samaniego, Luis A1 - Simmer, Clemens A1 - Attinger, Sabine T1 - A Comprehensive Distributed Hydrological Modeling Intercomparison to Support Process Representation and Data Collection Strategies JF - Water resources research N2 - The improvement of process representations in hydrological models is often only driven by the modelers' knowledge and data availability. We present a comprehensive comparison between two hydrological models of different complexity that is developed to support (1) the understanding of the differences between model structures and (2) the identification of the observations needed for model assessment and improvement. The comparison is conducted on both space and time and by aggregating the outputs at different spatiotemporal scales. In the present study, mHM, a process‐based hydrological model, and ParFlow‐CLM, an integrated subsurface‐surface hydrological model, are used. The models are applied in a mesoscale catchment in Germany. Both models agree in the simulated river discharge at the outlet and the surface soil moisture dynamics, lending their supports for some model applications (drought monitoring). Different model sensitivities are, however, found when comparing evapotranspiration and soil moisture at different soil depths. The analysis supports the need of observations within the catchment for model assessment, but it indicates that different strategies should be considered for the different variables. Evapotranspiration measurements are needed at daily resolution across several locations, while highly resolved spatially distributed observations with lower temporal frequency are required for soil moisture. Finally, the results show the impact of the shallow groundwater system simulated by ParFlow‐CLM and the need to account for the related soil moisture redistribution. Our comparison strategy can be applied to other models types and environmental conditions to strengthen the dialog between modelers and experimentalists for improving process representations in Earth system models. KW - hydrological models KW - assessments KW - monitoring strategies KW - improvements Y1 - 2019 U6 - https://doi.org/10.1029/2018WR023941 SN - 0043-1397 SN - 1944-7973 VL - 55 IS - 2 SP - 990 EP - 1010 PB - American Geophysical Union CY - Washington ER - TY - JOUR A1 - Chapman, Eric M. A1 - Lant, Benjamin A1 - Ohashi, Yota A1 - Yu, Bin A1 - Schertzberg, Michael A1 - Go, Christopher A1 - Dogra, Deepika A1 - Koskimaki, Janne A1 - Girard, Romuald A1 - Li, Yan A1 - Fraser, Andrew G. A1 - Awad, Issam A. A1 - Abdelilah-Seyfried, Salim A1 - Gingras, Anne-Claude A1 - Derry, William Brent T1 - A conserved CCM complex promotes apoptosis non-autonomously by regulating zinc homeostasis JF - Nature Communications N2 - Apoptotic death of cells damaged by genotoxic stress requires regulatory input from surrounding tissues. The C. elegans scaffold protein KRI-1, ortholog of mammalian KRIT1/CCM1, permits DNA damage-induced apoptosis of cells in the germline by an unknown cell non-autonomous mechanism. We reveal that KRI-1 exists in a complex with CCM-2 in the intestine to negatively regulate the ERK-5/MAPK pathway. This allows the KLF-3 transcription factor to facilitate expression of the SLC39 zinc transporter gene zipt-2.3, which functions to sequester zinc in the intestine. Ablation of KRI-1 results in reduced zinc sequestration in the intestine, inhibition of IR-induced MPK-1/ERK1 activation, and apoptosis in the germline. Zinc localization is also perturbed in the vasculature of krit1(-/-) zebrafish, and SLC39 zinc transporters are mis-expressed in Cerebral Cavernous Malformations (CCM) patient tissues. This study provides new insights into the regulation of apoptosis by cross-tissue communication, and suggests a link between zinc localization and CCM disease. Y1 - 2019 U6 - https://doi.org/10.1038/s41467-019-09829-z SN - 2041-1723 VL - 10 PB - Nature Publ. Group CY - London ER - TY - JOUR A1 - Winter, Benjamin A1 - Schneeberger, Klaus A1 - Dung, N. V. A1 - Huttenlau, M. A1 - Achleitner, S. A1 - Stötter, J. A1 - Merz, Bruno A1 - Vorogushyn, Sergiy T1 - A continuous modelling approach for design flood estimation on sub-daily time scale JF - Hydrological sciences journal = Journal des sciences hydrologiques N2 - Design flood estimation is an essential part of flood risk assessment. Commonly applied are flood frequency analyses and design storm approaches, while the derived flood frequency using continuous simulation has been getting more attention recently. In this study, a continuous hydrological modelling approach on an hourly time scale, driven by a multi-site weather generator in combination with a -nearest neighbour resampling procedure, based on the method of fragments, is applied. The derived 100-year flood estimates in 16 catchments in Vorarlberg (Austria) are compared to (a) the flood frequency analysis based on observed discharges, and (b) a design storm approach. Besides the peak flows, the corresponding runoff volumes are analysed. The spatial dependence structure of the synthetically generated flood peaks is validated against observations. It can be demonstrated that the continuous modelling approach can achieve plausible results and shows a large variability in runoff volume across the flood events. KW - derived flood frequency KW - continuous modelling KW - temporal disaggregation KW - flood hazard KW - synthetic flood events Y1 - 2019 U6 - https://doi.org/10.1080/02626667.2019.1593419 SN - 0262-6667 SN - 2150-3435 VL - 64 IS - 5 SP - 539 EP - 554 PB - Routledge, Taylor & Francis Group CY - Abingdon ER - TY - JOUR A1 - Eberli, Gregor P. A1 - Bernoulli, Daniel A1 - Vecsei, Adam A1 - Sekti, Rizky A1 - Grasmueck, Mark A1 - Lüdmann, Thomas A1 - Anselmetti, Flavio S. A1 - Mutti, Maria A1 - Della Porta, Giovanna T1 - A Cretaceous carbonate delta drift in the Montagna della Maiella, Italy JF - Sedimentology : the journal of the International Association of Sedimentologists N2 - The Upper Cretaceous (Campanian-Maastrichtian) bioclastic wedge of the Orfento Formation in the Montagna della Maiella, Italy, is compared to newly discovered contourite drifts in the Maldives. Like the drift deposits in the Maldives, the Orfento Formation fills a channel and builds a Miocene delta-shaped and mounded sedimentary body in the basin that is similar in size to the approximately 350 km(2) large coarse-grained bioclastic Miocene delta drifts in the Maldives. The composition of the bioclastic wedge of the Orfento Formation is also exclusively bioclastic debris sourced from the shallow-water areas and reworked clasts of the Orfento Formation itself. In the near mud-free succession, age-diagnostic fossils are sparse. The depositional textures vary from wackestone to float-rudstone and breccia/conglomerates, but rocks with grainstone and rudstone textures are the most common facies. In the channel, lensoid convex-upward breccias, cross-cutting channelized beds and thick grainstone lobes with abundant scours indicate alternating erosion and deposition from a high-energy current. In the basin, the mounded sedimentary body contains lobes with a divergent progradational geometry. The lobes are built by decametre thick composite megabeds consisting of sigmoidal clinoforms that typically have a channelized topset, a grainy foreset and a fine-grained bottomset with abundant irregular angular clasts. Up to 30 m thick channels filled with intraformational breccias and coarse grainstones pinch out downslope between the megabeds. In the distal portion of the wedge, stacked grainstone beds with foresets and reworked intraclasts document continuous sediment reworking and migration. The bioclastic wedge of the Orfento Formation has been variously interpreted as a succession of sea-level controlled slope deposits, a shoaling shoreface complex, or a carbonate tidal delta. Current-controlled delta drifts in the Maldives, however, offer a new interpretation because of their similarity in architecture and composition. These similarities include: (i) a feeder channel opening into the basin; (ii) an excavation moat at the exit of the channel; (iii) an overall mounded geometry with an apex that is in shallower water depth than the source channel; (iv) progradation of stacked lobes; (v) channels that pinch out in a basinward direction; and (vi) smaller channelized intervals that are arranged in a radial pattern. As a result, the Upper Cretaceous (Campanian-Maastrichtian) bioclastic wedge of the Orfento Formation in the Montagna della Maiella, Italy, is here interpreted as a carbonate delta drift. KW - Carbonate contourite drift KW - delta drift KW - Maiella Mountains KW - Orfento Formation KW - prograding lobes Y1 - 2019 U6 - https://doi.org/10.1111/sed.12590 SN - 0037-0746 SN - 1365-3091 VL - 66 IS - 4 SP - 1266 EP - 1301 PB - Wiley CY - Hoboken ER - TY - JOUR A1 - Zech, Alraune A1 - Attinger, Sabine A1 - Bellin, Alberto A1 - Cvetkovic, Vladimir A1 - Dietrich, Peter A1 - Fiori, Aldo A1 - Teutsch, Georg A1 - Dagan, Gedeon T1 - A Critical Analysis of Transverse Dispersivity Field Data JF - Groundwater : journal of the Association of Ground-Water Scientists and Engineers, a division of the National Ground Water Association N2 - Transverse dispersion, or tracer spreading orthogonal to the mean flow direction, which is relevant e.g, for quantifying bio-degradation of contaminant plumes or mixing of reactive solutes, has been studied in the literature less than the longitudinal one. Inferring transverse dispersion coefficients from field experiments is a difficult and error-prone task, requiring a spatial resolution of solute plumes which is not easily achievable in applications. In absence of field data, it is a questionable common practice to set transverse dispersivities as a fraction of the longitudinal one, with the ratio 1/10 being the most prevalent. We collected estimates of field-scale transverse dispersivities from existing publications and explored possible scale relationships as guidance criteria for applications. Our investigation showed that a large number of estimates available in the literature are of low reliability and should be discarded from further analysis. The remaining reliable estimates are formation-specific, span three orders of magnitude and do not show any clear scale-dependence on the plume traveled distance. The ratios with the longitudinal dispersivity are also site specific and vary widely. The reliability of transverse dispersivities depends significantly on the type of field experiment and method of data analysis. In applications where transverse dispersion plays a significant role, inference of transverse dispersivities should be part of site characterization with the transverse dispersivity estimated as an independent parameter rather than related heuristically to longitudinal dispersivity. Y1 - 2018 U6 - https://doi.org/10.1111/gwat.12838 SN - 0017-467X SN - 1745-6584 VL - 57 IS - 4 SP - 632 EP - 639 PB - Wiley CY - Hoboken ER - TY - JOUR A1 - Luetkecosmann, Steffi A1 - Faupel, Thomas A1 - Porstmann, Silvia A1 - Porstmann, Tomas A1 - Micheel, Burkhard A1 - Hanack, Katja T1 - A cross-reactive monoclonal antibody as universal detection antibody in autoantibody diagnostic assays JF - Clinica chimica acta N2 - Diagnostics of Autoimmune Diseases involve screening of patient samples for containing autoantibodies against various antigens. To ensure quality of diagnostic assays a calibrator is needed in each assay system. Different calibrators as recombinant human monoclonal antibodies as well as chimeric antibodies against the autoantigens of interest are described. A less cost-intensive and also more representative possibility covering different targets on the antigens is the utilization of polyclonal sera from other species. Nevertheless, the detection of human autoantibodies as well as the calibration reagent containing antibodies from other species in one assay constitutes a challenge in terms of assay calibration. We therefore developed a cross-reactive monoclonal antibody which binds human as well as rabbit sera with similar affinities in the nanomolar range. We tested our monoclonal antibody S38CD11B12 successfully in the commercial Serazym (R) Anti-Cardiolipin-beta 2-GPI IgG/IgM assay and could thereby prove the eligibility of S38CD11B12 as detection antibody in autoimmune diagnostic assays using rabbit derived sera as reference material. KW - Monoclonal antibody KW - Detection KW - Autoimmune diagnostics KW - Cross reactivity KW - Assay calibration Y1 - 2019 U6 - https://doi.org/10.1016/j.cca.2019.09.003 SN - 0009-8981 SN - 1873-3492 VL - 499 SP - 87 EP - 92 PB - Elsevier CY - Amsterdam ER - TY - THES A1 - Krentz, Konrad-Felix T1 - A Denial-of-Sleep-Resilient Medium Access Control Layer for IEEE 802.15.4 Networks T1 - Eine Denial-of-Sleep-Resiliente Mediumzugriffsschicht für IEEE-802.15.4-Netzwerke N2 - With the emergence of the Internet of things (IoT), plenty of battery-powered and energy-harvesting devices are being deployed to fulfill sensing and actuation tasks in a variety of application areas, such as smart homes, precision agriculture, smart cities, and industrial automation. In this context, a critical issue is that of denial-of-sleep attacks. Such attacks temporarily or permanently deprive battery-powered, energy-harvesting, or otherwise energy-constrained devices of entering energy-saving sleep modes, thereby draining their charge. At the very least, a successful denial-of-sleep attack causes a long outage of the victim device. Moreover, to put battery-powered devices back into operation, their batteries have to be replaced. This is tedious and may even be infeasible, e.g., if a battery-powered device is deployed at an inaccessible location. While the research community came up with numerous defenses against denial-of-sleep attacks, most present-day IoT protocols include no denial-of-sleep defenses at all, presumably due to a lack of awareness and unsolved integration problems. After all, despite there are many denial-of-sleep defenses, effective defenses against certain kinds of denial-of-sleep attacks are yet to be found. The overall contribution of this dissertation is to propose a denial-of-sleep-resilient medium access control (MAC) layer for IoT devices that communicate over IEEE 802.15.4 links. Internally, our MAC layer comprises two main components. The first main component is a denial-of-sleep-resilient protocol for establishing session keys among neighboring IEEE 802.15.4 nodes. The established session keys serve the dual purpose of implementing (i) basic wireless security and (ii) complementary denial-of-sleep defenses that belong to the second main component. The second main component is a denial-of-sleep-resilient MAC protocol. Notably, this MAC protocol not only incorporates novel denial-of-sleep defenses, but also state-of-the-art mechanisms for achieving low energy consumption, high throughput, and high delivery ratios. Altogether, our MAC layer resists, or at least greatly mitigates, all denial-of-sleep attacks against it we are aware of. Furthermore, our MAC layer is self-contained and thus can act as a drop-in replacement for IEEE 802.15.4-compliant MAC layers. In fact, we implemented our MAC layer in the Contiki-NG operating system, where it seamlessly integrates into an existing protocol stack. N2 - Mit dem Aufkommen des Internets der Dinge (IoT), werden immer mehr batteriebetriebene und energieerntende Geräte in diversen Anwendungsbereichen eingesetzt, etwa in der Heimautomatisierung, Präzisionslandwirtschaft, Industrieautomatisierung oder intelligenten Stadt. In diesem Kontext stellen sogenannte Denial-of-Sleep-Angriffe eine immer kritischer werdende Bedrohung dar. Solche Angriffe halten batteriebetriebene, energieerntende oder anderweitig energiebeschränkte Geräte zeitweise oder chronisch ab, in energiesparende Schlafmodi überzugehen. Erfolgreiche Denial-of-Sleep-Angriffe führen zumindest zu einer langen Ausfallzeit der betroffenen Geräte. Um betroffene batteriebetriebene Geräte wieder in Betrieb zu nehmen, müssen zudem deren Batterien gewechselt werden. Dies ist mühsam oder eventuell sogar unmöglich, z.B. wenn solche Geräte an unzugänglichen Orten installiert sind. Obwohl die Forschungsgemeinschaft bereits viele Denial-of-Sleep-Abwehrmechanismen vorgeschlagen hat, besitzen die meisten aktuellen IoT-Protokolle überhaupt keine Denial-of-Sleep-Abwehrmechanismen. Dies kann zum einen daran liegen, dass man des Problems noch nicht gewahr ist, aber zum anderen auch daran, dass viele Integrationsfragen bislang ungeklärt sind. Des Weiteren existieren bisher sowieso noch keine effektiven Abwehrmechanismen gegen bestimmte Denial-of-Sleep-Angriffe. Der Hauptbeitrag dieser Dissertation ist die Entwicklung einer Denial-of-Sleep-resilienten Mediumzugriffsschicht für IoT-Geräte, die via IEEE-802.15.4-Funkverbindungen kommunizieren. Die entwickelte Mediumzugriffsschicht besitzt zwei Hauptkomponenten. Die erste Hauptkomponente ist ein Denial-of-Sleep-resilientes Protokoll zur Etablierung von Sitzungsschlüsseln zwischen benachbarten IEEE-802.15.4-Knoten. Diese Sitzungsschlüssel dienen einerseits der grundlegenden Absicherung des Funkverkehrs und andererseits der Implementierung zusätzlicher Denial-of-Sleep-Abwehrmechanismen in der zweiten Hauptkomponente. Die zweite Hauptkomponente ist ein Denial-of-Sleep-resilientes Mediumzugriffsprotokoll. Bemerkenswert an diesem Mediumzugriffsprotokoll ist, dass es nicht nur neuartige Denial-of-Sleep-Abwehrmechanismen enthält, sondern auch dem Stand der Technik entsprechende Mechanismen zur Verringerung des Energieverbrauchs, zur Steigerung des Durchsatzes sowie zur Erhöhung der Zuverlässigkeit. Zusammenfassend widersteht bzw. mildert unsere Denial-of-Sleep-resiliente Mediumzugriffsschicht alle uns bekannten Denial-of-Sleep-Angriffe, die gegen sie gefahren werden können. Außerdem kann unsere Denial-of-Sleep-resiliente Mediumzugriffsschicht ohne Weiteres an Stelle von IEEE-802.15.4-konformen Mediumzugriffsschichten eingesetzt werden. Dies zeigen wir durch die nahtlose Integration unserer Mediumzugriffsschicht in den Netzwerk-Stack des Betriebssystems Contiki-NG. KW - medium access control KW - denial of sleep KW - internet of things KW - Mediumzugriffskontrolle KW - Schlafentzugsangriffe KW - Internet der Dinge Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-439301 ER - TY - JOUR A1 - Demal, Till Joscha A1 - Heise, Melina A1 - Reiz, Benedikt A1 - Dogra, Deepika A1 - Braenne, Ingrid A1 - Reichenspurner, Hermann A1 - Männer, Jörg A1 - Aherrahrou, Zouhair A1 - Schunkert, Heribert A1 - Erdmann, Jeanette A1 - Abdelilah-Seyfried, Salim T1 - A familial congenital heart disease with a possible multigenic origin involving a mutation in BMPR1A JF - Scientific reports N2 - The genetics of many congenital heart diseases (CHDs) can only unsatisfactorily be explained by known chromosomal or Mendelian syndromes. Here, we present sequencing data of a family with a potentially multigenic origin of CHD. Twelve of nineteen family members carry a familial mutation [NM_004329.2:c.1328 G > A (p.R443H)] which encodes a predicted deleterious variant of BMPR1A. This mutation co-segregates with a linkage region on chromosome 1 that associates with the emergence of severe CHDs including Ebstein’s anomaly, atrioventricular septal defect, and others. We show that the continuous overexpression of the zebrafish homologous mutation bmpr1aap.R438H within endocardium causes a reduced AV valve area, a downregulation of Wnt/ß-catenin signalling at the AV canal, and growth of additional tissue mass in adult zebrafish hearts. This finding opens the possibility of testing genetic interactions between BMPR1A and other candidate genes within linkage region 1 which may provide a first step towards unravelling more complex genetic patterns in cardiovascular disease aetiology. Y1 - 2019 U6 - https://doi.org/10.1038/s41598-019-39648-7 SN - 2045-2322 VL - 9 PB - Nature Publ. Group CY - London ER - TY - JOUR A1 - Alexiadou, Artemis T1 - A form-function mismatch? BT - The case of Greek deponents JF - Of trees and birds. A Festschrift for Gisbert Fanselow KW - Festschrift KW - Informationsstruktur KW - Linguistik KW - Morphologie KW - Syntax KW - festschrift KW - information structure KW - linguistics KW - morphology KW - syntax Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-432235 SN - 978-3-86956-457-9 SP - 107 EP - 117 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - JOUR A1 - Emuoyibofarhe, Justice O. A1 - Akindele, Akinyinka Tosin A1 - Ronke, Babatunde Seyi A1 - Omotosho, Adebayo A1 - Meinel, Christoph T1 - A Fuzzy Rule-Based Model for Remote Monitoring of Preterm in the Intensive Care Unit of Hospitals JF - International Journal of Medical Research & Health Sciences N2 - The use of Remote patient monitoring (RPM) systems to monitor critically ill patients in the Intensive Care Unit (ICU) has enabled quality and real-time healthcare management. Fuzzy logic as an approach to designing RPM systems provides a means for encapsulating the subjective decision-making process of medical experts in an algorithm suitable for computer implementation. In this paper, a remote monitoring system for preterm in neonatal ICU incubators is modeled and simulated. The model was designed with 4 input variables (body temperature, heart rate, respiratory rate, and oxygen level saturation), and 1 output variable (action performed represented as ACT). ACT decides whether-an alert is generated or not and also determines the message displayed when a notification is required. ACT classifies the clinical priority of the monitored preterm into 5 different fields: code blue, code red, code yellow, code green, and-code black. The model was simulated using a fuzzy logic toolbox of MATLAB R2015A. About 216 IF_THEN rules were formulated to monitor the inputs data fed into the model. The performance of the model was evaluated using-the confusion matrix to determine the model’s accuracy, precision, sensitivity, specificity, and false alarm rate. The-experimental results obtained shows that the fuzzy-based system is capable of producing satisfactory results when used for monitoring and classifying the clinical statuses of neonates in ICU incubators. KW - Remote patient monitoring KW - Fuzzy logic KW - Preterm KW - Incubator KW - Confusion matrix Y1 - 2019 SN - 2319-5886 VL - 8 IS - 5 SP - 33 EP - 44 PB - Sumathi CY - Trichy ER - TY - JOUR A1 - Lontsi, Agostiny Marrios A1 - Garcia-Jerez, Antonio A1 - Camilo Molina-Villegas, Juan A1 - Jose Sanchez-Sesma, Francisco A1 - Molkenthin, Christian A1 - Ohrnberger, Matthias A1 - Krüger, Frank A1 - Wang, Rongjiang A1 - Fah, Donat T1 - A generalized theory for full microtremor horizontal-to-vertical [H/V(z,f)] spectral ratio interpretation in offshore and onshore environments JF - Geophysical journal international N2 - Advances in the field of seismic interferometry have provided a basic theoretical interpretation to the full spectrum of the microtremor horizontal-to-vertical spectral ratio [H/V(f)]. The interpretation has been applied to ambient seismic noise data recorded both at the surface and at depth. The new algorithm, based on the diffuse wavefield assumption, has been used in inversion schemes to estimate seismic wave velocity profiles that are useful input information for engineering and exploration seismology both for earthquake hazard estimation and to characterize surficial sediments. However, until now, the developed algorithms are only suitable for on land environments with no offshore consideration. Here, the microtremor H/V(z, f) modelling is extended for applications to marine sedimentary environments for a 1-D layered medium. The layer propagator matrix formulation is used for the computation of the required Green’s functions. Therefore, in the presence of a water layer on top, the propagator matrix for the uppermost layer is defined to account for the properties of the water column. As an application example we analyse eight simple canonical layered earth models. Frequencies ranging from 0.2 to 50 Hz are considered as they cover a broad wavelength interval and aid in practice to investigate subsurface structures in the depth range from a few meters to a few hundreds of meters. Results show a marginal variation of 8 per cent at most for the fundamental frequency when a water layer is present. The water layer leads to variations in H/V peak amplitude of up to 50 per cent atop the solid layers. KW - Numerical modelling KW - Earthquake hazards KW - Seismic interferometry KW - Site effects KW - Theoretical seismology KW - Wave propagation Y1 - 2019 U6 - https://doi.org/10.1093/gji/ggz223 SN - 0956-540X SN - 1365-246X VL - 218 IS - 2 SP - 1276 EP - 1297 PB - Oxford Univ. Press CY - Oxford ER - TY - JOUR A1 - Beisner, Beatrix E. A1 - Grossart, Hans-Peter A1 - Gasol, Josep M. T1 - A guide to methods for estimating phago-mixotrophy in nanophytoplankton JF - Journal of plankton research N2 - Growing attention to phytoplankton mixotrophy as a trophic strategy has led to significant revisions of traditional pelagic food web models and ecosystem functioning. Although some empirical estimates of mixotrophy do exist, a much broader set of in situ measurements are required to (i) identify which organisms are acting as mixotrophs in real time and to (ii) assess the contribution of their heterotrophy to biogeochemical cycling. Estimates are needed through time and across space to evaluate which environmental conditions or habitats favour mixotrophy: conditions still largely unknown. We review methodologies currently available to plankton ecologists to undertake estimates of plankton mixotrophy, in particular nanophytoplankton phago-mixotrophy. Methods are based largely on fluorescent or isotopic tracers, but also take advantage of genomics to identify phylotypes and function. We also suggest novel methods on the cusp of use for phago-mixotrophy assessment, including single-cell measurements improving our capacity to estimate mixotrophic activity and rates in wild plankton communities down to the single-cell level. Future methods will benefit from advances in nanotechnology, micromanipulation and microscopy combined with stable isotope and genomic methodologies. Improved estimates of mixotrophy will enable more reliable models to predict changes in food web structure and biogeochemical flows in a rapidly changing world. KW - flow cytometry KW - phagotrophy KW - phytoplankton KW - methods KW - fluorescence KW - microscopy KW - FISH KW - isotopic methods KW - phylotypes KW - carbon flows KW - gene sequencing Y1 - 2019 U6 - https://doi.org/10.1093/plankt/fbz008 SN - 0142-7873 SN - 1464-3774 VL - 41 IS - 2 SP - 77 EP - 89 PB - Oxford Univ. Press CY - Oxford ER - TY - GEN A1 - Myachykov, Andriy A1 - Fischer, Martin H. T1 - A hierarchical view of abstractness BT - Grounded, embodied, and situated aspect: Comment on "Words as social tools: Language, sociality and inner grounding in abstract concepts" by Anna M. Borghi et al. T2 - Physics of life reviews Y1 - 2019 U6 - https://doi.org/10.1016/j.plrev.2019.04.005 SN - 1571-0645 SN - 1873-1457 VL - 29 SP - 161 EP - 163 PB - Elsevier CY - Amsterdam ER - TY - GEN A1 - Jantzen, Friederike A1 - Wozniak, Natalia Joanna A1 - Kappel, Christian A1 - Sicard, Adrien A1 - Lenhard, Michael T1 - A high‑throughput amplicon‑based method for estimating outcrossing rates T2 - Postprints der Universität Potsdam Mathematisch-Naturwissenschaftliche Reihe N2 - Background: The outcrossing rate is a key determinant of the population-genetic structure of species and their long-term evolutionary trajectories. However, determining the outcrossing rate using current methods based on PCRgenotyping individual offspring of focal plants for multiple polymorphic markers is laborious and time-consuming. Results: We have developed an amplicon-based, high-throughput enabled method for estimating the outcrossing rate and have applied this to an example of scented versus non-scented Capsella (Shepherd’s Purse) genotypes. Our results show that the method is able to robustly capture differences in outcrossing rates. They also highlight potential biases in the estimates resulting from differential haplotype sharing of the focal plants with the pollen-donor population at individual amplicons. Conclusions: This novel method for estimating outcrossing rates will allow determining this key population-genetic parameter with high-throughput across many genotypes in a population, enabling studies into the genetic determinants of successful pollinator attraction and outcrossing. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 745 KW - Outcrossing KW - Mixed mating KW - Outcrossing rate KW - Capsella KW - Amplicon sequencing Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-435657 SN - 1866-8372 IS - 745 ER - TY - JOUR A1 - Jantzen, Friederike A1 - Wozniak, Natalia Joanna A1 - Kappel, Christian A1 - Sicard, Adrien A1 - Lenhard, Michael T1 - A high‑throughput amplicon‑based method for estimating outcrossing rates JF - Plant Methods N2 - Background: The outcrossing rate is a key determinant of the population-genetic structure of species and their long-term evolutionary trajectories. However, determining the outcrossing rate using current methods based on PCRgenotyping individual offspring of focal plants for multiple polymorphic markers is laborious and time-consuming. Results: We have developed an amplicon-based, high-throughput enabled method for estimating the outcrossing rate and have applied this to an example of scented versus non-scented Capsella (Shepherd’s Purse) genotypes. Our results show that the method is able to robustly capture differences in outcrossing rates. They also highlight potential biases in the estimates resulting from differential haplotype sharing of the focal plants with the pollen-donor population at individual amplicons. Conclusions: This novel method for estimating outcrossing rates will allow determining this key population-genetic parameter with high-throughput across many genotypes in a population, enabling studies into the genetic determinants of successful pollinator attraction and outcrossing. KW - Outcrossing KW - Mixed mating KW - Outcrossing rate KW - Capsella KW - Amplicon sequencing Y1 - 2019 U6 - https://doi.org/10.1186/s13007-019-0433-9 SN - 1746-4811 VL - 15 IS - 47 PB - BioMed Central CY - London ER - TY - GEN A1 - Gonzalez-Lopez, Fernanda A1 - Pufahl, Luise T1 - A Landscape for Case Models T2 - Enterprise, Business-Process and Information Systems Modeling N2 - Case Management is a paradigm to support knowledge-intensive processes. The different approaches developed for modeling these types of processes tend to result in scattered models due to the low abstraction level at which the inherently complex processes are therein represented. Thus, readability and understandability is more challenging than that of traditional process models. By reviewing existing proposals in the field of process overviews and case models, this paper extends a case modeling language - the fragment-based Case Management (fCM) language - with the goal of modeling knowledge-intensive processes from a higher abstraction level - to generate a so-called fCM landscape. This proposal is empirically evaluated via an online experiment. Results indicate that interpreting an fCM landscape might be more effective and efficient than interpreting an informationally equivalent case model. KW - Case Management KW - Process landscape KW - Process map KW - Process architecture KW - Process model Y1 - 2019 SN - 978-3-030-20618-5 SN - 978-3-030-20617-8 U6 - https://doi.org/10.1007/978-3-030-20618-5_6 SN - 1865-1348 VL - 352 SP - 87 EP - 102 PB - Springer CY - Berlin ER - TY - BOOK A1 - Schneider, Sven A1 - Lambers, Leen A1 - Orejas, Fernando T1 - A logic-based incremental approach to graph repair T1 - Ein logikbasierter inkrementeller Ansatz für Graphreparatur N2 - Graph repair, restoring consistency of a graph, plays a prominent role in several areas of computer science and beyond: For example, in model-driven engineering, the abstract syntax of models is usually encoded using graphs. Flexible edit operations temporarily create inconsistent graphs not representing a valid model, thus requiring graph repair. Similarly, in graph databases—managing the storage and manipulation of graph data—updates may cause that a given database does not satisfy some integrity constraints, requiring also graph repair. We present a logic-based incremental approach to graph repair, generating a sound and complete (upon termination) overview of least-changing repairs. In our context, we formalize consistency by so-called graph conditions being equivalent to first-order logic on graphs. We present two kind of repair algorithms: State-based repair restores consistency independent of the graph update history, whereas deltabased (or incremental) repair takes this history explicitly into account. Technically, our algorithms rely on an existing model generation algorithm for graph conditions implemented in AutoGraph. Moreover, the delta-based approach uses the new concept of satisfaction (ST) trees for encoding if and how a graph satisfies a graph condition. We then demonstrate how to manipulate these STs incrementally with respect to a graph update. N2 - Die Reparatur von Graphen, die Wiederherstellung der Konsistenz eines Graphen, spielt in mehreren Bereichen der Informatik und darüber hinaus eine herausragende Rolle: Beispielsweise wird in der modellgetriebenen Konstruktion die abstrakte Syntax von Modellen in der Regel mithilfe von Graphen kodiert. Flexible Bearbeitungsvorgänge erstellen vorübergehend inkonsistente Diagramme, die kein gültiges Modell darstellen, und erfordern daher eine Reparatur des Diagramms. Auf ähnliche Weise können Aktualisierungen in Graphendatenbanken - die das Speichern und Bearbeiten von Graphendaten verwalten - dazu führen, dass eine bestimmte Datenbank einige Integritätsbeschränkungen nicht erfüllt und auch eine Graphreparatur erforderlich macht. Wir präsentieren einen logikbasierten inkrementellen Ansatz für die Graphreparatur, der eine solide und vollständige (nach Beendigung) Übersicht über die am wenigsten verändernden Reparaturen erstellt. In unserem Kontext formalisieren wir die Konsistenz mittels sogenannten Graphbedingungen die der Logik erster Ordnung in Graphen entsprechen. Wir stellen zwei Arten von Reparaturalgorithmen vor: Die zustandsbasierte Reparatur stellt die Konsistenz unabhängig vom Verlauf der Graphänderung wieder her, während die deltabasierte (oder inkrementelle) Reparatur diesen Verlauf explizit berücksichtigt. Technisch stützen sich unsere Algorithmen auf einen vorhandenen Modellgenerierungsalgorithmus für in AutoGraph implementierte Graphbedingungen. Darüber hinaus verwendet der deltabasierte Ansatz das neue Konzept der Erfüllungsbäume (STs) zum Kodieren, ob und wie ein Graph eine Graphbedingung erfüllt. Wir zeigen dann, wie diese STs in Bezug auf eine Graphaktualisierung inkrementell manipuliert werden. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 126 KW - nested graph conditions KW - graph repair KW - model repair KW - consistency restoration KW - verschachtelte Graphbedingungen KW - Graphreparatur KW - Modellreparatur KW - Konsistenzrestauration Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-427517 SN - 978-3-86956-462-3 SN - 1613-5652 SN - 2191-1665 IS - 126 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - JOUR A1 - Scheffler, Franziska A1 - Immenhauser, Adrian A1 - Pourteau, Amaury A1 - Natalicchio, Marcello A1 - Candan, Osman A1 - Oberhänsli, Roland T1 - A lost Tethyan evaporitic basin BT - Evidence from a Cretaceous hemipelagic meta-selenite - red chert association in the Eastern Mediterranean realm JF - Sedimentology : the journal of the International Association of Sedimentologists N2 - Ancient evaporite deposits are geological archives of depositional environments characterized by a long‐term negative precipitation balance and bear evidence for global ocean element mass balance calculations. Here, Cretaceous selenite pseudomorphs from western Anatolia (‘Rosetta Marble’) — characterized by their exceptional morphological preservation — and their ‘marine’ geochemical signatures are described and interpreted in a process‐oriented context. These rocks recorded Late Cretaceous high‐pressure/low‐temperature, subduction‐related metamorphism with peak conditions of 1·0 to 1·2 GPa and 300 to 400°C. Metre‐scale, rock‐forming radiating rods, now present as fibrous calcite marble, clearly point to selenitic gypsum as the precursor mineral. Stratigraphic successions are recorded along a reconstructed proximal to distal transect. The cyclical alternation of selenite beds and radiolarian ribbon‐bedded cherts in the distal portions are interpreted as a two type of seawater system. During arid intervals, shallow marine brines cascaded downward into basinal settings and induced precipitation. During more humid times, upwelling‐induced radiolarian blooms caused the deposition of radiolarite facies. Interestingly, there is no comparable depositional setting known from the Cenozoic world. Meta‐selenite geochemical data (δ13C, δ18O and 87Sr/86Sr) plot within the range of reconstructed middle Cretaceous seawater signatures. Possible sources for the 13C‐enriched (mean 2·2‰) values include methanogenesis, gas hydrates and cold seep fluid exhalation. Spatially resolved component‐specific analysis of a rock slab displays isotopic variances between meta‐selenite crystals (mean δ13C 2·2‰) and host matrix (mean δ13C 1·3‰). The Cretaceous evaporite‐pseudomorphs of Anatolia represent a basin wide event coeval with the Aptian evaporites of the Proto‐Atlantic and the pseudomorphs share many attributes, including lateral distribution of 600 km and stratigraphic thickness of 1·5 to 2·0 km, with the evaporites formed during the younger Messinian salinity crisis. The Rosetta Marble of Anatolia may represent the best‐preserved selenite pseudomorphs worldwide and have a clear potential to act as a template for the study of meta‐selenite in deep time. KW - Blueschist metamorphism KW - depositional environment KW - evaporites KW - Neotethys KW - pseudomorphism KW - sedimentology Y1 - 2019 U6 - https://doi.org/10.1111/sed.12606 SN - 0037-0746 SN - 1365-3091 VL - 66 IS - 7 SP - 2627 EP - 2660 PB - Wiley CY - Hoboken ER - TY - JOUR A1 - Schiro, Gabriele A1 - Colangeli, Pierluigi A1 - Müller, Marina E. H. T1 - A Metabarcoding Analysis of the Mycobiome of Wheat Ears Across a Topographically Heterogeneous Field JF - Frontiers in microbiology KW - Fusarium KW - microclimate KW - canopy KW - fungal community KW - Alternaria KW - spatially induced variance Y1 - 2019 U6 - https://doi.org/10.3389/fmicb.2019.02095 SN - 1664-302X VL - 10 PB - Frontiers Research Foundation CY - Lausanne ER - TY - RPRT A1 - Krieger, Heike A1 - Liese, Andrea Margit T1 - A Metamorphosis of International Law? BT - Value changes in the international legal order from the perspectives of legal and political science T2 - KFG Working Paper Series N2 - The paper aims to lay out a framework for evaluating value shifts in the international legal order for the purposes of a forthcoming book. In view of current contestations it asks whether we are observing yet another period of norm change (Wandel) or even a more fundamental transformation of international law – a metamorphosis (Verwandlung). For this purpose it suggests to look into the mechanisms of how norms change from the perspective of legal and political science and also to approximate a reference point where change turns into metamorphosis. It submits that such a point may be reached where specific legally protected values are indeed changing (change of legal values) or where the very idea of protecting certain values through law is renounced (delegalizing of values). The paper discusses the benefits of such an interdisciplinary exchange and tries to identify differences and commonalities among both disciplinary perspectives. T3 - KFG Working Paper Series - 27 Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-426088 IS - 27 ER - TY - JOUR A1 - Pornsawad, Pornsarp A1 - Sapsakul, Nantawan A1 - Böckmann, Christine T1 - A modified asymptotical regularization of nonlinear ill-posed problems JF - Mathematics N2 - In this paper, we investigate the continuous version of modified iterative Runge–Kutta-type methods for nonlinear inverse ill-posed problems proposed in a previous work. The convergence analysis is proved under the tangential cone condition, a modified discrepancy principle, i.e., the stopping time T is a solution of ∥𝐹(𝑥𝛿(𝑇))−𝑦𝛿∥=𝜏𝛿+ for some 𝛿+>𝛿, and an appropriate source condition. We yield the optimal rate of convergence. KW - nonlinear operator KW - regularization KW - discrepancy principle KW - asymptotic method KW - optimal rate Y1 - 2019 U6 - https://doi.org/10.3390/math7050419 SN - 2227-7390 VL - 7 PB - MDPI CY - Basel, Schweiz ET - 5 ER - TY - GEN A1 - Pornsawad, Pornsarp A1 - Sapsakul, Nantawan A1 - Böckmann, Christine T1 - A modified asymptotical regularization of nonlinear ill-posed problems T2 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - In this paper, we investigate the continuous version of modified iterative Runge–Kutta-type methods for nonlinear inverse ill-posed problems proposed in a previous work. The convergence analysis is proved under the tangential cone condition, a modified discrepancy principle, i.e., the stopping time T is a solution of ∥𝐹(𝑥𝛿(𝑇))−𝑦𝛿∥=𝜏𝛿+ for some 𝛿+>𝛿, and an appropriate source condition. We yield the optimal rate of convergence. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1335 KW - nonlinear operator KW - regularization KW - discrepancy principle KW - asymptotic method KW - optimal rate Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-473433 SN - 1866-8372 IS - 1335 ER - TY - JOUR A1 - Schwarzenthal, Miriam A1 - Juang, Linda P. A1 - Schachner, Maja Katharina A1 - van de Vijver, Fons J. R. T1 - A multimodal measure of cultural intelligence for adolescents growing up in culturally diverse societies JF - International Journal of Intercultural Relations N2 - Adolescents growing up in culturally diverse societies need to develop intercultural competence. To better understand how to develop intercultural competence we need measures specifically relating to the everyday intercultural experiences of adolescents. However, few measures of intercultural competence are available for this target group. Based on the cultural intelligence (CQ) model (Earley & Ang, 2003), we developed a measure that combines a self-report questionnaire and situational judgment tests (SJTs). The latter comprise a brief description of intercultural situations, followed by questions asking the adolescents to interpret and provide a reaction to the situations. The reliability, factor structure, measurement equivalence, and validity of the new measure was tested in two samples of adolescents in culturally diverse regions in North Rhine-Westphalia (N = 631, 48% female, M-a(ge) = 13.69 years, SDage = 1.83) and Berlin (N = 1,335, 48% female, M-age = 14.69 years, SDage, = 0.74) in Germany. The self-report CQ scale showed good reliability and a four-dimensional factor structure with a higher-order CQ factor. The responses to the SJTs were coded based on a coding manual and the ratings loaded onto one factor. The measurement models showed metric to scalar measurement equivalence across immigrant background, gender, and grade. The CQ factor and the SJT factor were positively correlated with each other, as well as with related constructs such as openness, perspective-taking, and diversity beliefs. We conclude that the new measure offers a reliable and valid method to assess the intercultural competence of adolescents growing up in culturally diverse societies. KW - Cultural intelligence KW - Intercultural competence KW - Adolescents Y1 - 2019 U6 - https://doi.org/10.1016/j.ijintrel.2019.07.007 SN - 0147-1767 SN - 1873-7552 VL - 72 SP - 109 EP - 121 PB - Elsevier CY - Oxford ER - TY - THES A1 - Thiede, Tobias T1 - A multiscale analysis of additively manufactured lattice structures T1 - Multiskalige Analyse von Additiv Gefertigten Gitterstrukturen N2 - Additive Manufacturing (AM) in terms of laser powder-bed fusion (L-PBF) offers new prospects regarding the design of parts and enables therefore the production of lattice structures. These lattice structures shall be implemented in various industrial applications (e.g. gas turbines) for reasons of material savings or cooling channels. However, internal defects, residual stress, and structural deviations from the nominal geometry are unavoidable. In this work, the structural integrity of lattice structures manufactured by means of L-PBF was non-destructively investigated on a multiscale approach. A workflow for quantitative 3D powder analysis in terms of particle size, particle shape, particle porosity, inter-particle distance and packing density was established. Synchrotron computed tomography (CT) was used to correlate the packing density with the particle size and particle shape. It was also observed that at least about 50% of the powder porosity was released during production of the struts. Struts are the component of lattice structures and were investigated by means of laboratory CT. The focus was on the influence of the build angle on part porosity and surface quality. The surface topography analysis was advanced by the quantitative characterisation of re-entrant surface features. This characterisation was compared with conventional surface parameters showing their complementary information, but also the need for AM specific surface parameters. The mechanical behaviour of the lattice structure was investigated with in-situ CT under compression and successive digital volume correlation (DVC). The deformation was found to be knot-dominated, and therefore the lattice folds unit cell layer wise. The residual stress was determined experimentally for the first time in such lattice structures. Neutron diffraction was used for the non-destructive 3D stress investigation. The principal stress directions and values were determined in dependence of the number of measured directions. While a significant uni-axial stress state was found in the strut, a more hydrostatic stress state was found in the knot. In both cases, strut and knot, seven directions were at least needed to find reliable principal stress directions. N2 - Das Laserstrahlschmelzen (L-PBF) als Prozess im Bereich der Additiven Fertigung (AM) ermöglicht ein neuartiges Bauteildesign und somit auch die Produktion von komplexen Gitterstrukturen, welche Materialeinsparungen und effizientere Kühlsysteme erlauben und daher für verschiedene industrielle Anwendungen (z.B. Gasturbinen) geeignet sind. Interne Defekte, Eigenspannungen und geometrische Abweichungen von der Soll-Geometrie sind jedoch unvermeidbar. Im Rahmen dieser Arbeit wird die strukturelle Integrität von L-PBF gefertigten Gitterstrukturen zerstörungsfrei auf verschiedenen Größenskalen untersucht. Eine Auswerteroutine für dreidimensionale quantitative Pulvercharakterisierung hinsichtlich der Partikelgröße, der -form, der -porosität, des Interpartikelabstands und der Packungsdichte wurde entwickelt. Synchrotron Computertomographie (CT) wurde für die Korrelation der Packungsdichte mit der Partikelgröße und -form genutzt. Darüber hinaus konnte festgestellt werden, dass mindestens 50% der Porosität aus den Pulverpartikel während der Herstellung der Streben mittels L-PBF gelöst wurde. Streben sind die Grundbausteine der Gitterstrukturen und wurden mit industrieller CT untersucht. Dabei lag der Fokus auf dem Einfluss des Bauwinkels auf die Strebenporosität und -oberflächenqualität. Die Analyse der Oberflächentopographie wurde hinsichtlich einer quantitativen Analyse von sogenannten re-entrant features erweitert. Der Vergleich dieser Auswertung mit konventionellen Oberflächenparametern offenbarte sowohl deren Komplementarität also auch den Bedarf an neuen AM-spezifischen Oberflächenparametern. In-situ CT Versuche mit anschließender digitaler Volumenkorrelation (DVC) erlaubte die Gitterstruktur bezüglich des mechanischen Verhaltens unter Druckspannung zu bewerten. Aufgrund einer schichtweisen Faltung der Einheitszellen konnte dabei das Versagensverhalten als knoten-dominiert identifiziert werden. Mittels Neutronenbeugung konnten Eigenspannungen in solchen Gitterstrukturen erstmalig experimentell bestimmt werden. Dabei wurden sowohl die Hauptspannungsrichtungen als auch die -beträge in Abhängigkeit von der Anzahl der gemessenen Spannungsrichtungen bestimmt. Während in der Strebe ein signifikanter uni-axialer Spannungszustand nachgewiesen wurde, zeigte der Knotenpunkt einen hydrostatischeren Spannungszustand. Sowohl im Falle der Strebe als auch des Knotenpunkts waren mindestens sieben gemessene Spannungsrichtungen nötig, um die Hauptspannungsrichtungen verlässlich zu ermitteln. KW - additive manufacturing KW - laser powder bed fusion KW - computed tomography KW - neutron diffraction KW - in-situ testing KW - residual stress KW - roughness KW - powder particle analysis KW - additive Fertigung KW - Laserstrahlschmelzen KW - Computertomographie KW - Neutronendiffraktion KW - In-situ Experimente KW - Eigenspannung KW - Rauheit KW - Pulverpartikelanalyse Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-470418 ER - TY - JOUR A1 - Chaabene, Helmi A1 - Negra, Yassine A1 - Capranica, Laura A1 - Prieske, Olaf A1 - Granacher, Urs T1 - A Needs Analysis of Karate Kumite With Recommendations for Performance Testing and Training JF - Strength and conditioning journal N2 - An effective training program needs to be customized to the specific demands of the redpective sport. Therefore, it is important to conduct a needs analysis to gain information on the unique characteristics of the sport. The objectives of thes review were (A) to conduct a systematic needs analysis of karate kumite and (B) to provide practical recommendations for sport-specific performance testing and training of karate kumite athletes. KW - sport profile KW - striking combat sports KW - strength KW - power KW - energetic systems KW - injury KW - assessment Y1 - 2019 U6 - https://doi.org/10.1519/SSC.0000000000000445 SN - 1524-1602 SN - 1533-4295 VL - 41 IS - 3 SP - 35 EP - 46 PB - Lippincott Williams & Wilkins CY - Philadelphia ER - TY - JOUR A1 - Ozturk, Ugur A1 - Malik, Nishant A1 - Cheung, Kevin A1 - Marwan, Norbert A1 - Kurths, Jürgen T1 - A network-based comparative study of extreme tropical and frontal storm rainfall over Japan JF - Climate dynamics : observational, theoretical and computational research on the climate system N2 - Frequent and intense rainfall events demand innovative techniques to better predict the extreme rainfall dynamics. This task requires essentially the assessment of the basic types of atmospheric processes that trigger extreme rainfall, and then to examine the differences between those processes, which may help to identify key patterns to improve predictive algorithms. We employ tools from network theory to compare the spatial features of extreme rainfall over the Japanese archipelago and surrounding areas caused by two atmospheric processes: the Baiu front, which occurs mainly in June and July (JJ), and the tropical storms from August to November (ASON). We infer from complex networks of satellite-derived rainfall data, which are based on the nonlinear correlation measure of event synchronization. We compare the spatial scales involved in both systems and identify different regions which receive rainfall due to the large spatial scale of the Baiu and tropical storm systems. We observed that the spatial scales involved in the Baiu driven rainfall extremes, including the synoptic processes behind the frontal development, are larger than tropical storms, which even have long tracks during extratropical transitions. We further delineate regions of coherent rainfall during the two seasons based on network communities, identifying the horizontal (east-west) rainfall bands during JJ over the Japanese archipelago, while during ASON these bands align with the island arc of Japan. KW - Extreme rainfall KW - Baiu KW - Tropical storms KW - Event synchronization KW - Complex networks Y1 - 2019 U6 - https://doi.org/10.1007/s00382-018-4597-1 SN - 0930-7575 SN - 1432-0894 VL - 53 IS - 1-2 SP - 521 EP - 532 PB - Springer CY - New York ER - TY - JOUR A1 - Rheinwahlt, Aljoscha A1 - Goswami, Bedartha A1 - Bookhagen, Bodo T1 - A network-based flow accumulation algorithm for point clouds BT - Facet-Flow Networks (FFNs) JF - Journal of geophysical research : Earth surface N2 - Flow accumulation algorithms estimate the steady state of flow on real or modeled topographic surfaces and are crucial for hydrological and geomorphological assessments, including delineation of river networks, drainage basins, and sediment transport processes. Existing flow accumulation algorithms are typically designed to compute flows on regular grids and are not directly applicable to arbitrarily sampled topographic data such as lidar point clouds. In this study we present a random sampling scheme that generates homogeneous point densities, in combination with a novel flow path tracing approach-the Facet-Flow Network (FFN)-that estimates flow accumulation in terms of specific catchment area (SCA) on triangulated surfaces. The random sampling minimizes biases due to spatial sampling and the FFN allows for direct flow estimation from point clouds. We validate our approach on a Gaussian hill surface and study the convergence of its SCA compared to the analytical solution. Here, our algorithm outperforms the multiple flow direction algorithm, which is optimized for divergent surfaces. We also compute the SCA of a 6-km(2)-steep, vegetated catchment on Santa Cruz Island, California, based on airborne lidar point-cloud data. Point-cloud-based SCA values estimated by our method compare well with those estimated by the D-infinity or multiple flow direction algorithm on gridded data. The advantage of computing SCA from point clouds becomes relevant especially for divergent topography and for small drainage areas: These are depicted with much more detail due to the higher sampling density of point clouds. KW - point clouds KW - drainage networks KW - lidar KW - tin KW - surface runoff KW - spatial sampling Y1 - 2019 U6 - https://doi.org/10.1029/2018JF004827 SN - 2169-9003 SN - 2169-9011 VL - 124 IS - 7 SP - 2013 EP - 2033 PB - American Geophysical Union CY - Washington ER - TY - GEN A1 - Awasthi, Swapnil A1 - Kaminski, Jakob A1 - Rapp, Michael Armin A1 - Schlagenhauf, Florian A1 - Walter, Henrik A1 - Ruggeri, Barbara A1 - Ripke, Stephan A1 - Schumann, Gunter A1 - Heinz, Andreas T1 - A neural signature of malleability BT - general intelligence correlates with ventral striatal activation and epigenetic makers of dopamine neurotransmission T2 - European neuropsychopharmacology : the journal of the European College of Neuropsychopharmacology N2 - General intelligence has a substantial genetic background in children, adolescents, and adults, but environmental factors also strongly correlate with cognitive performance as evidenced by a strong (up to one SD) increase in average intelligence test results in the second half of the previous century. This change occurred in a period apparently too short to accommodate radical genetic changes. It is highly suggestive that environmental factors interact with genotype by possible modification of epigenetic factors that regulate gene expression and thus contribute to individual malleability. This modification might as well be reflected in recent observations of an association between dopamine-dependent encoding of reward prediction errors and cognitive capacity, which was modulated by adverse life events. Y1 - 2019 U6 - https://doi.org/10.1016/j.euroneuro.2017.08.139 SN - 0924-977X SN - 1873-7862 VL - 29 SP - S858 EP - S859 PB - Elsevier CY - Amsterdam ER - TY - GEN A1 - Sagu Tchewonpi, Sorel A1 - Huschek, Gerd A1 - Bönick, Josephine A1 - Homann, Thomas A1 - Rawel, Harshadrai Manilal T1 - A New Approach of Extraction of α-Amylase/trypsin Inhibitors from Wheat (Triticum aestivum L.), Based on Optimization Using Plackett–Burman and Box–Behnken Designs T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Wheat is one of the most consumed foods in the world and unfortunately causes allergic reactions which have important health effects. The α-amylase/trypsin inhibitors (ATIs) have been identified as potentially allergen components of wheat. Due to a lack of data on optimization of ATI extraction, a new wheat ATIs extraction approach combining solvent extraction and selective precipitation is proposed in this work. Two types of wheat cultivars (Triticum aestivum L.), Julius and Ponticus were used and parameters such as solvent type, extraction time, temperature, stirring speed, salt type, salt concentration, buffer pH and centrifugation speed were analyzed using the Plackett-Burman design. Salt concentration, extraction time and pH appeared to have significant effects on the recovery of ATIs (p < 0.01). In both wheat cultivars, Julius and Ponticus, ammonium sulfate substantially reduced protein concentration and inhibition of amylase activity (IAA) compared to sodium chloride. The optimal conditions with desirability levels of 0.94 and 0.91 according to the Doehlert design were: salt concentrations of 1.67 and 1.22 M, extraction times of 53 and 118 min, and pHs of 7.1 and 7.9 for Julius and Ponticus, respectively. The corresponding responses were: protein concentrations of 0.31 and 0.35 mg and IAAs of 91.6 and 83.3%. Electrophoresis and MALDI-TOF/MS analysis showed that the extracted ATIs masses were between 10 and 20 kDa. Based on the initial LC-MS/MS analysis, up to 10 individual ATIs were identified in the extracted proteins under the optimal conditions. The positive implication of the present study lies in the quick assessment of their content in different varieties especially while considering their allergenic potential. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 805 KW - wheat KW - α-amylase/trypsin inhibitors KW - extraction KW - Plackett–Burman design KW - Doehlert design KW - SDS-PAGE KW - MALDI-TOF/MS KW - LC-MS/MS Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-442229 SN - 1866-8372 IS - 805 ER -