TY - JOUR A1 - Ziesemer, Florence A1 - Hüttel, Alexandra A1 - Balderjahn, Ingo T1 - Young people as drivers or inhibitors of the sustainability movement BT - the case of anti-consumption JF - Journal of consumer policy : consumer issues in law, economics and behavioural sciences N2 - As overconsumption has negative effects on ecological balance, social equality, and individual well-being, reducing consumption levels among the materially affluent is an emerging strategy for sustainable development. Today's youth form a crucial target group for intervening in unsustainable overconsumption habits and for setting the path and ideas on responsible living. This article explores young people's motivations for engaging in three behavioural patterns linked to anti-consumption (voluntary simplicity, collaborative consumption, and living within one's means) in relation to sustainability. Applying a qualitative approach, laddering interviews reveal the consequences and values behind the anti-consumption behaviours of young people of ages 14 to 24 according to a means-end chains analysis. The findings highlight potential for and the challenges involved in motivating young people to reduce material levels of consumption for the sake of sustainability. Related consumer policy tools from the fields of education and communication are identified. This article provides practical implications for policy makers, activists, and educators. Consumer policies may strengthen anti-consumption among young people by addressing individual benefits, enabling reflection on personal values, and referencing credible narratives. The presented insights can help give a voice to young consumers, who struggle to establish themselves as key players in shaping the future consumption regime. KW - Voluntary simplicity KW - Collaborative consumption KW - Sustainable KW - consumption KW - Means-end chain analysis KW - Laddering interviews KW - Youth Y1 - 2021 U6 - https://doi.org/10.1007/s10603-021-09489-x SN - 0168-7034 SN - 1573-0700 VL - 44 IS - 3 SP - 427 EP - 453 PB - Springer CY - New York ER - TY - RPRT A1 - Zerfaß, Ansgar A1 - Stieglitz, Stefan A1 - Clausen, Sünje A1 - Ziegele, Daniel A1 - Berger, Karen T1 - Communications trend radar 2023 BT - state revival, scarcity management, unimagination, augmented workflows & parallel worlds T2 - Communication insights N2 - How do social changes, new technologies or new management trends affect communication work? A team of researchers at Leipzig University and the University of Potsdam (Germany) observed new developments in related disciplines. As a result, the five most important trends for corporate communications are identified annually and published in the Communications Trend Radar. Thus, Communications managers can identify challenges and opportunities at an early stage, take a position, address issues and make decisions. For 2023, the Communications Trend Radar identifies five key trends for corporate communications: State Revival, Scarcity Management, Unimagination, Parallel Worlds, Augemented Workflows. KW - public relation KW - trend KW - country KW - stakeholders KW - bottleneck KW - resilience KW - artificial intelligence KW - virtual reality Y1 - 2023 UR - https://hdl.handle.net/10419/270993 U6 - https://doi.org/10419/270993 SN - 2749-893X VL - 17 PB - Academic Society for Management & Communication CY - Leipzig ER - TY - JOUR A1 - Zahedi, Anoushiravan A1 - Öznur Akalin, Renin A1 - Lawrence, Johanna E. A1 - Baumann, Annika A1 - Sommer, Werner T1 - The nature and persistence of the effects of posthypnotic suggestions on food preferences BT - the final report of an online study JF - Frontiers in psychology N2 - The persistence of food preferences, which are crucial for diet-related decisions, is a significant obstacle to changing unhealthy eating behavior. To overcome this obstacle, the current study investigates whether posthypnotic suggestions (PHSs) can enhance food-related decisions by measuring food choices and subjective ratings. After assessing hypnotic susceptibility in Session 1, at the beginning of Session 2, a PHS was delivered aiming to increase the desirability of healthy food items (e.g., vegetables and fruit). After the termination of hypnosis, a set of two tasks was administrated twice, once when the PHS was activated and once deactivated in counterbalanced order. The task set consisted of rating 170 pictures of food items, followed by an online supermarket where participants were instructed to select enough food from the same item pool for a fictitious week of quarantine. After 1 week, Session 3 mimicked Session 2 without renewed hypnosis induction to assess the persistence of the PHS effects. The Bayesian hierarchical modeling results indicate that the PHS increased preferences and choices of healthy food items without altering the influence of preferences in choices. In contrast, for unhealthy food items, not only both preferences and choices were decreased due to the PHS, but also their relationship was modified. That is, although choices became negatively biased against unhealthy items, preferences played a more dominant role in unhealthy choices when the PHS was activated. Importantly, all effects persisted over 1 week, qualitatively and quantitatively. Our results indicate that although the PHS affected healthy choices through resolve, i.e., preferred more and chosen more, unhealthy items were probably chosen less impulsively through effortful suppression. Together, besides the translational importance of the current results for helping the obesity epidemic in modern societies, our results contribute theoretically to the understanding of hypnosis and food choices. KW - hypnosis KW - online supermarket KW - posthypnotic suggestions (PHSs) KW - food choice KW - eating behavior KW - food preferences KW - Bayesian analysis KW - Bayesian generalized linear mixed model Y1 - 2023 U6 - https://doi.org/10.3389/fpsyg.2023.1123907 SN - 1664-1078 VL - 14 PB - Frontiers Research Foundation CY - Lausanne ER - TY - CHAP A1 - Wulff, Markus A1 - Tiberius, Victor A1 - Mahto, Raj V. ED - Kraus, Sascha ED - Clauß, Thomas ED - Kallmuenzer, Andreas T1 - Mapping the intellectual structure of family firm research and proposing a research agenda T2 - Research handbook on entrepreneurship and innovation in family firms N2 - In this chapter, we conduct bibliometric performance analyses and a co-citation analysis on all articles relating to family firms indexed in Scopus and Web of Science and all articles published in the Family Business Review, Journal of Family Business Management, and the Journal of Family Business Strategy. Based on the literature sample of 4,056 articles published between 1960 and 2020 by 3,600 authors in 783 journals and their 175,163 references, we identify the most productive and most cited journals, the most cited authors, and the 25 most cited articles. Our science mapping reveals the agency theory, definitions, entrepreneurship, internationalization, ownership, resources, socioemotional wealth, and succession as the predominant research themes in family firm research. Whereas entrepreneurship explicitly appears in one of the clusters, innovation does not yet. Based on our findings, we propose a research framework and point to several research gaps to be addressed by future research. KW - bibliometric analysis KW - family firms KW - research agenda Y1 - 2023 SN - 978-1-80088-923-1 SN - 978-1-80088-924-8 U6 - https://doi.org/10.4337/9781800889248.00007 SP - 14 EP - 37 PB - Edward Elgar Publishing CY - Cheltenham ER - TY - JOUR A1 - Wotschack, Philip A1 - Vladova, Gergana A1 - de Paiva Lareiro, Patricia A1 - Thim, Christof T1 - Learning via assistance systems in industrial manufacturing BT - an experimental study in an Industry 4.0 environment JF - Journal of workplace learning N2 - Purpose The purpose of this paper is to investigate how learning solely via an assistance system influences work performance compared with learning with a combination of an assistance system and additional training. While the training literature has widely emphasised the positive role of on-the-job training, particularly for groups that are often underrepresented in formalised learning situations, organisational studies have stressed the risks that emerge when holistic process knowledge is lacking and how this negatively affects work performance. This study aims at testing these negative effects within an experimental design. Design/methodology/approach This paper uses a laboratory experimental design to investigate how assistance-system-guided learning influences the individuals’ work performance and work satisfaction compared with assistance-system-guided learning combined with theoretical learning of holistic process knowledge. Subjects were divided into two groups and assigned to two different settings. In the first setting, the participants used the assistance systems as an orientation and support tool right at the beginning and learned the production steps exclusively in this way. In the second setting, subjects received an additional 10-min introduction (treatment) at the beginning of the experiment, including detailed information regarding the entire work process. Findings This study provides evidence that learners provided with prior process knowledge achieve a better understanding of the work process leading to higher levels of productivity, quality and work satisfaction. At the same time, the authors found evidence for differences among workers’ ability to process and apply this additional information. Subjects with lower productivity levels faced more difficulties processing and applying additional process information. Research limitations/implications Methodologically, this study goes beyond existing research on assistance systems by using a laboratory experimental design. Though the external validity of this method is limited by the artificial setting, it is a solid way of studying the impact of different usages of digital assistance systems in terms of training. Further research is required, however, including laboratory experiments with larger case numbers, company-level case studies and analyses of survey data, to further confirm the external validity of the findings of this study for the workplace. Practical implications This study provides some first evidence that holistic process knowledge, even in low-skill tasks, has an added value for the production process. This study contributes to firms' training policies by exploring new, digitalised ways of guided on-the-job training and demonstrates possible training benefits for people with lower levels of (initial) abilities and motivation. Social implications This study indicates the advantage for companies and societies to invest in additional skills and training and points at the limitations of assistance systems. This paper also contributes to training policies by exploring new, digitalised ways of guided on-the-job training and demonstrates possible training benefits for people with lower levels of (initial) abilities and motivation. Originality/value This study extends existing research on digital assistance systems by investigating their role in job-related-training. This paper contributes to labour sociology and organisational research by confirming the importance of holistic process knowledge as opposed to a solely task-oriented digital introduction. KW - information technology KW - training KW - knowledge KW - workplace learning KW - new technology Y1 - 2023 U6 - https://doi.org/10.1108/JWL-09-2022-0119 SN - 1366-5626 SN - 1758-7859 VL - 35 IS - 9 SP - 235 EP - 258 PB - Emerald CY - Bradford ER - TY - CHAP A1 - Winter, Robert A1 - Bender, Benedict A1 - Aier, Stephan ED - Bui, Tung X. T1 - Enterprise-level IS research – need, conceptualization, exemplary knowledge contributions and future opportunities T2 - Proceedings of the 57th Annual Hawaii International Conference on System Sciences N2 - Enterprise solutions, specifically enterprise systems, have allowed companies to integrate enterprises’ operations throughout. The integration scope of enterprise solutions has increasingly widened, now often covering customer activities, activities along supply chains, and platform ecosystems. IS research has contributed a wide range of explanatory and design knowledge dealing with this class of IS. During the last two decades, many technological as well as managerial/organizational innovations extended the affordances of enterprise solutions—but this broader scope also challenges traditional approaches to their analysis and design. This position paper presents an enterprise-level (i.e., cross-solution) perspective on IS, discusses the challenges of complexity and coordination for IS design and management, presents selected enterprise-level insights for IS coordination and governance, and explores avenues towards a more comprehensive body of knowledge on this important level of analysis. KW - enterprise ecosystems: the integrated enterprise KW - levels of information systems research (process, enterprise-, ecosystem- & industry-level) KW - enterprise architecture KW - enterprise systems KW - is governance KW - it/business alignment KW - organizational level Y1 - 2024 SN - 978-0-9981331-7-1 SP - 6402 EP - 6411 PB - Hawaii International Conference on System Sciences CY - Honolulu, HI ER - TY - JOUR A1 - Wilksch, Moritz A1 - Abramova, Olga T1 - PyFin-sentiment BT - towards a machine-learning-based model for deriving sentiment from financial tweets JF - International journal of information management data insights N2 - Responding to the poor performance of generic automated sentiment analysis solutions on domain-specific texts, we collect a dataset of 10,000 tweets discussing the topics of finance and investing. We manually assign each tweet its market sentiment, i.e., the investor’s anticipation of a stock’s future return. Using this data, we show that all existing sentiment models trained on adjacent domains struggle with accurate market sentiment analysis due to the task’s specialized vocabulary. Consequently, we design, train, and deploy our own sentiment model. It outperforms all previous models (VADER, NTUSD-Fin, FinBERT, TwitterRoBERTa) when evaluated on Twitter posts. On posts from a different platform, our model performs on par with BERT-based large language models. We achieve this result at a fraction of the training and inference costs due to the model’s simple design. We publish the artifact as a python library to facilitate its use by future researchers and practitioners. KW - sentiment analysis KW - financial market sentiment KW - opinion mining KW - machine learning KW - deep learning Y1 - 2023 U6 - https://doi.org/10.1016/j.jjimei.2023.100171 SN - 2667-0968 VL - 3 IS - 1 PB - Elsevier CY - Amsterdam ER - TY - THES A1 - Wild, Andreas T1 - Strategic supplier cooperation in the automotive industry T2 - Schriftenreihe zum Verhandlungsmanagement ; 18 N2 - In the automotive industry, suppliers from the consumer electronics and high-tech industry are becoming increasingly relevant, for example in the context of automated vehicles. The carmakers’ purchasing organizations need to understand the power constellation in negotiations with these new suppliers, since negotiating power is the greatest lever for influencing the outcome of negotiations. This study analyzes the importance of organizational sources of power and their interplay with the products’ degree of innovation. Y1 - 2022 SN - 978-3-339-12618-4 SN - 978-3-339-12619-1 PB - Kovac CY - Hamburg ER - TY - CHAP A1 - Weyland, Michael A1 - Pallast, Gregor A1 - Tiberius, Victor ED - Brahm, Taiga ED - Iberer, Ulrich ED - Kärner, Tobias ED - Weyland, Michael T1 - Ökonomisches Denken fördern durch kognitiv aktivierende Aufgaben T2 - Ökonomisches Denken lehren und lernen N2 - In diesem Beitrag möchten wir einen Gedanken des amerikanischen Mathematikers Paul Halmos aufgreifen und konkretisieren. Wir möchten verdeutlichen, dass ökonomisches Denken nicht abstrakt gelehrt, sondern „erfahren“ werden muss, wenn es nachhaltig und in seiner ganzen Breite gefördert werden soll. Dazu dienen kognitiv aktivierende Aufgaben. Was man darunter versteht und welche Funktionen und Qualitätsmerkmale Aufgaben in der ökonomischen Bildung besitzen, verdeutlichen wir in den Abschnitten 1 und 2. Im Praxisteil (Abschnitte 3 bis 8) werden konkrete, unterrichtlich erprobte Beispielaufgaben vorgestellt, mit denen ökonomisches Denken erfolgreich gefördert werden kann. Unser Beitrag schließt mit einer kurzen Skizze wirtschaftsdidaktischer Implikationen (Abschnitt 9). N2 - In this chapter, we refer to the American mathematician Paul Halmos’ notion that economic thinking cannot be taught in an abstract way but has to be “experienced” so that it can be facilitated in a sustainable and broad way. This can be accomplished with cognitively activating tasks. In sections 1 and 2, we define these and explain their functions and quality requirements for economic education. In the practice sections 3 to 8, we show specific exemplary tasks, which have been successfully tested in classes tofoster economic thinking. The chapter concludes with implications for economic education. KW - Ökonomische Bildung KW - kognitive Aktivierung KW - Lernaufgaben KW - ökonomische Experimente KW - Verhaltensökonomie KW - Umweltökonomie KW - economic education KW - cognitive activation KW - tasks KW - classroom experiments KW - behavioral economics KW - environmental economics Y1 - 2022 UR - https://elibrary.utb.de/doi/book/10.3278/9783763973088 SN - 978-3-7639-7048-3 SN - 978-3-7639-7308-8 U6 - https://doi.org/10.3278/9783763973088_25 SP - 26 EP - 48 PB - wbv CY - Bielefeld ER - TY - JOUR A1 - Weyer, Julia A1 - Tiberius, Victor A1 - Bican, Peter A1 - Kraus, Sascha T1 - Digitizing grocery retailing BT - the role of emerging technologies in the value chain JF - International journal of innovation and technology management N2 - Multiple emerging technologies both threaten grocers and offer them attractive opportunities to enhance their value propositions, improve processes, reduce costs, and therefore generate competitive advantages. Among the variety of technological innovations and considering the scarcity of resources, it is unclear which technologies to focus on and where to implement them in the value chain. To develop the most probable technology forecast that addresses the application of emerging technologies in the grocery value chain within the current decade, we conduct a two-stage Delphi study. Our results suggest a high relevance of almost all technologies. The panel is only skeptical about three specific projections. As a consequence, grocers are advised to build up knowledge regarding the application of these technologies in the most promising areas of their value chain. KW - Delphi study KW - technological forecasting KW - grocery retailing KW - artificial intelligence KW - augmented reality KW - big data analytics KW - blockchain technology KW - drones KW - RFID Y1 - 2021 U6 - https://doi.org/10.1142/S0219877020500583 SN - 0219-8770 SN - 1793-6950 VL - 17 IS - 08 PB - World Scientific Publishing CY - Singapore ER - TY - JOUR A1 - Wenninger, Helena Eva A1 - Cheung, Christy M. K. A1 - Krasnova, Hanna T1 - College-aged users behavioral strategies to reduce envy on social networking sites BT - A cross-cultural investigation JF - Computers in human behavior N2 - Social networking sites (SNSs) are central to social interaction and information sharing in the digital age. However, consuming social information on SNSs invites social upward comparisons with highly socially desirable profile representations, which easily elicits envy in users and leads to unfavorable behaviors on SNSs. This in turn can erode the subjective well-being of users and the sustainability of the SNS platform. Therefore, this paper seeks to develop a better theoretical understanding of how users respond to envy on SNSs. We review literature on envy in offline interactions to derive three behavioral strategies to reduce envy, which we then transfer to the SNS context (self-enhancement, gossiping, and discontinuous intention). Further, we propose a research model and examine how culture, specifically individualism-collectivism, affects the relationship between envy on an SNS and the three strategies. We empirically test the variance-based structural equation model through survey data collected of Facebook users from Germany and Hong Kong. Our findings provide first insights into the link between envy on SNSs, related behavioral strategies and the moderating role of individualism for self-enhancement. KW - Envy on SNSs KW - Social networking sites KW - Facebook KW - Behavioral strategies to reduce SNS-Induced envy KW - Culture KW - User behaviors Y1 - 2019 U6 - https://doi.org/10.1016/j.chb.2019.02.025 SN - 0747-5632 SN - 1873-7692 VL - 97 SP - 10 EP - 23 PB - Elsevier CY - Oxford ER - TY - JOUR A1 - Wang, Nan A1 - Xie, Wenxuan A1 - Tiberius, Victor A1 - Qiu, Yong T1 - Accelerating new product diffusion BT - how lead users serve as opinion leaders in social networks JF - Journal of retailing and consumer services N2 - In social networks or, more specifically, online communities on tech-products, opinion leaders are important sources of advice for other consumers in the adoption and diffusion of new products. However, possibilities for potential users to exert their influence on opinion leadership are ignored. This study determines whether and how lead users may serve as opinion leaders in social networks and advise other consumers in the adoption and diffusion of new products. Our survey with 308 users in the Xiaomi and Huawei communities suggests that higher lead userness is positively and significantly associated with the likelihood of opinion giving and passing. Product-possessing innovativeness has a higher impact compared with information-possessing innovativeness. Product involvement does not enhance the effect of information-possessing innovativeness. The findings provide a better understanding of the formation of opinion leadership in social networks for an accelerated diffusion of new products. KW - lead userness KW - opinion leadership KW - domain-specific innovativeness KW - new product diffusion KW - product involvement Y1 - 2023 U6 - https://doi.org/10.1016/j.jretconser.2023.103297 SN - 0969-6989 VL - 72 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Wang, Nan A1 - Tiberius, Victor A1 - Chen, Xiangxiang A1 - Brem, Alexander A1 - Yu, Fei T1 - Idea selection and adoption by users BT - a process model in an online innovation community JF - Technology analysis & strategic management N2 - Firms increasingly use ideas from online innovation communities to solve problems or to better address customer needs. However, in many cases the number of submitted ideas has exploded, it leads to an information overload that firms hardly can handle considering their limited cognitive resources. Therefore, we use the Elaboration Likelihood Model to distinguish between the quick and lean idea preselection process as a peripheral route of information processing and the subsequent idea review process as a central route of information processing. In our empirical study with a sample of more than 163,000 ideas collected from the Xiaomi MIUI community, we analyse influencing factors that increase the likelihood of ideas being preselected or reviewed. Results show that user status, user initiative contribution, and community recognition have a significantly positive influence on idea preselction, whereas user response contribution has no influence. Idea presentation characteristics have an inverted U-curve relationship with idea adoption. Community absorptive capacity has a moderate effect on the curvilinear relationship between idea description length and idea adoption. KW - idea adoption KW - idea selection KW - online innovation community KW - cognitive overload Y1 - 2020 U6 - https://doi.org/10.1080/09537325.2020.1863055 SN - 0953-7325 SN - 1465-3990 VL - 33 IS - 9 SP - 1036 EP - 1051 PB - Taylor & Francis Group CY - London ER - TY - CHAP A1 - Wagner, Dieter A1 - Tellez, Ibrahin Amhed León ED - Hickmann, Thomas ED - Lederer, Markus T1 - Knowledge and technology-transfer-networks BT - examples in the nutrition, food and agricultural sector in Germany and Cuba T2 - Leidenschaft und Augenmaß : sozialwissenschaftliche Perspektiven auf Entwicklung, Verwaltung, Umwelt und Klima : Festschrift für Harald Fuhr Y1 - 2020 SN - 978-3-8487-5249-2 SN - 978-3-8452-9429-2 U6 - https://doi.org/10.5771/9783845294292-285 SP - 285 EP - 298 PB - Nomos CY - Baden-Baden ER - TY - JOUR A1 - Vladova, Gergana A1 - Wotschack, Philip A1 - Lareiro, Patricia de Paiva A1 - Gronau, Norbert A1 - Thim, Christof T1 - Lernen mit Assistenzsystemen T1 - Learning with assistance systems BT - vor lauter Aufgaben den Prozess nicht sehen? BT - not seeing the process for the tasks? JF - Industrie 4.0 Management : Gegenwart und Zukunft industrieller Geschäftsprozesse N2 - Der Beitrag beschreibt die Konzeption und Durchführung und bietet einen Einblick in die ersten Ergebnisse einer Untersuchung mit experimentellem Design in einer simulierten Prozessumgebung im Forschungs- und Anwendungszentrum Industrie 4.0 in Potsdam. Im Mittelpunkt stehen Anlernprozesse im Bereich der Einfacharbeit (Helfertätigkeiten) und ihre Gestaltung durch den Einsatz digitaler Assistenzsysteme. In der Arbeitsforschung finden sich Hinweise darauf, dass mit dem Einsatz dieser Systeme Prozesswissen verloren geht, im Sinne einer guten Kenntnis des gesamten Arbeitsprozesses, in den die einzelnen Tätigkeiten eingebettet sind. Das kann sich als Problem erweisen, vor allem wenn unvorhersehbare Situationen oder Fehler eintreten. Um die Rolle von Prozesswissen beim Einsatz von digitalen Assistenzsystemen zu untersuchen, wird im Experiment eine echte Fabriksituation simuliert. Die Probanden werden über ein Assistenzsystem Schritt für Schritt in ihre Aufgabentätigkeit angelernt, einem Teil der Probanden wird allerdings am Anfang zusätzlich Prozesswissen im Rahmen einer kurzen Schulung vermittelt. N2 - The paper describes the conception and implementation as well as offers an insight into the first results of a study with experimental design in a simulated process environment at the Research and Application Center Industry 4.0 in Potsdam. The focus is on learning processes in the field of simple work and their organization through the use of digital assistance systems. In labour research, there are indications that process knowledge is lost with the use of these systems, in the sense of a good knowledge of the entire work process in which the individual activities are embedded. To investigate the role of process knowledge in the use of digital assistance systems, a real factory situation is simulated in the experiment. KW - Assistenzsysteme KW - Industrie 4.0 KW - Prozesswissen KW - Lernfabrik KW - assistance systems KW - industry 4.0 KW - process knowledge KW - learning factory Y1 - 2020 U6 - https://doi.org/10.30844/I40M_20-3_S16-20 SN - 2364-9208 VL - 36 IS - 3 SP - 16 EP - 20 PB - GITO mbH Verlag CY - Berlin ER - TY - CHAP A1 - Vladova, Gergana A1 - Ullrich, André A1 - Sultanow, Eldar A1 - Tobolla, Marinho A1 - Sebrak, Sebastian A1 - Czarnecki, Christian A1 - Brockmann, Carsten ED - Klein, Maike ED - Krupka, Daniel ED - Winter, Cornelia ED - Wohlgemuth, Volker T1 - Visual analytics for knowledge management BT - advantages for organizations and interorganizational teams T2 - Informatik 2023 N2 - The management of knowledge in organizations considers both established long-term processes and cooperation in agile project teams. Since knowledge can be both tacit and explicit, its transfer from the individual to the organizational knowledge base poses a challenge in organizations. This challenge increases when the fluctuation of knowledge carriers is exceptionally high. Especially in large projects in which external consultants are involved, there is a risk that critical, company-relevant knowledge generated in the project will leave the company with the external knowledge carrier and thus be lost. In this paper, we show the advantages of an early warning system for knowledge management to avoid this loss. In particular, the potential of visual analytics in the context of knowledge management systems is presented and discussed. We present a project for the development of a business-critical software system and discuss the first implementations and results. KW - knowledge management KW - visual analytics KW - knowledge transfer KW - teamwork KW - knowledge management system KW - tacit knowledge KW - explicit knowledge Y1 - 2023 SN - 978-3-88579-731-9 U6 - https://doi.org/10.18420/inf2023_187 SN - 1617-5468 SP - 1851 EP - 1870 PB - Gesellschaft für Informatik e.V. (GI) CY - Bonn ER - TY - JOUR A1 - Vladova, Gergana A1 - Ullrich, André A1 - Sloane, Mona A1 - Renz, André A1 - Tsui, Eric T1 - Editorial: new teaching and learning worlds BT - potentials and limitations of digitalization for innovative and sustainable research and practice in education and training JF - Frontiers in education KW - creativity KW - design thinking KW - digital education KW - 21st century skills KW - open education KW - virtual education Y1 - 2023 U6 - https://doi.org/10.3389/feduc.2023.1175498 SN - 2504-284X VL - 8 SP - 1 EP - 3 PB - Frontiers Media CY - Lausanne ER - TY - CHAP A1 - Vladova, Gergana A1 - Ullrich, André A1 - Bender, Benedict A1 - Gronau, Norbert ED - Reis, Arsénio ED - Barroso, João ED - Lopes, J. Bernardino ED - Mikropoulos, Tassos ED - Fan, Chih-Wen T1 - Yes, we can (?) BT - a critical review of the COVID-19 semester T2 - Technology and innovation in learning, teaching and education : second international conference, TECH-EDU 2020, Vila Real, Portugal, December 2-4, 2020 : proceedings N2 - The COVID-19 crisis has caused an extreme situation for higher education institutions around the world, where exclusively virtual teaching and learning has become obligatory rather than an additional supporting feature. This has created opportunities to explore the potential and limitations of virtual learning formats. This paper presents four theses on virtual classroom teaching and learning that are discussed critically. We use existing theoretical insights extended by empirical evidence from a survey of more than 850 students on acceptance, expectations, and attitudes regarding the positive and negative aspects of virtual teaching. The survey responses were gathered from students at different universities during the first completely digital semester (Spring-Summer 2020) in Germany. We discuss similarities and differences between the subjects being studied and highlight the advantages and disadvantages of virtual teaching and learning. Against the background of existing theory and the gathered data, we emphasize the importance of social interaction, the combination of different learning formats, and thus context-sensitive hybrid learning as the learning form of the future. KW - COVID-19 KW - higher education KW - virtual learning KW - digital learning KW - subject differences Y1 - 2021 SN - 978-3-030-73987-4 SN - 978-3-030-73988-1 U6 - https://doi.org/10.1007/978-3-030-73988-1_17 SP - 225 EP - 235 PB - Springer CY - Cham ER - TY - JOUR A1 - Vladova, Gergana A1 - Ullrich, André A1 - Bender, Benedict T1 - Chancen und Grenzen digitaler Lehre an Hochschulen aus Studierendenperspektive BT - Empirische Befunde und Gestaltungshinweise JF - HMD : Praxis der Wirtschaftsinformatik N2 - The design of qualitative, excellent teaching requires collaboration between teachers and learners. For this purpose, face-to-face teaching benefits from a long-standing tradition, while digital teaching is comparatively still at the beginning of its dissemination. A major developmental step toward the digitization of teaching was achieved in the context of university teaching during the Covid 19 pandemic in spring 2020, when face-to-face teaching was interrupted for months. During this time, important insights into the opportunities and limitations of digital teaching were gained. This paper presents selected results of a study conducted at four German universities and with 875 responses in spring 2020. The study uncovers opportunities and limitations of digital teaching from the students’ perspective and against the background of their experience in the completely digital semester. The results are used as a basis for deriving design guidelines for digital teaching and learning offerings. Based on a model for analyzing the design of teaching and learning formats, these indications are structured according to the elements learners, teachers, teaching content, environment and teaching style. Y1 - 2021 U6 - https://doi.org/https://doi.org/10.1365/s40702-021-00796-y SN - 2198-2775 SN - 1436-3011 VL - 58 SP - 1313 EP - 1326 PB - Springer CY - Wiesbaden ER - TY - CHAP A1 - Vladova, Gergana A1 - Rüdian, Sylvio Leo T1 - From learners to educators BT - development of online courses by students for students T2 - The future of education N2 - The rapid growth of technology and its evolving potential to support the transformation of teaching and learning in post-secondary institutions is a major challenge to the basic understanding of both the university and the communities it serves. In higher education, the standard forms of learning and teaching are increasingly being challenged and a more comprehensive process of differentiation is taking place. Student-centered teaching methods are becoming increasingly important in course design and the role of the lecturer is changing from the knowledge mediator to moderator and learning companion. However, this is accelerating the need for strategically planned faculty support and a reassessment of the role of teaching and learning. Even though the benefits of experience-based learning approaches for the development of life skills are well known, most knowledge transfer is still realized through lectures in higher education. Teachers have the goal to design the curriculum, new assignments, and share insights into evolving pedagogy. Student engagement could be the most important factor in the learning success of university students, regardless of the university program or teaching format. Against this background, this article presents the development, application, and initial findings of an innovative learning concept. In this concept, students are allowed to deal with a scientific topic, but instead of a presentation and a written elaboration, their examination consists of developing an online course in terms of content, didactics, and concept to implement it in a learning environment, which is state of the art. The online courses include both self-created teaching material and interactive tasks. The courses are created to be available to other students as learning material after a review process and are thus incorporated into the curriculum. KW - future curriculum KW - digitalization KW - online courses KW - COVID-19 Y1 - 2020 UR - https://conference.pixel-online.net/files/foe/ed0010/FP/6824-CUD4792-FP-FOE10.pdf SN - 978-88-85813-87-8 U6 - https://doi.org/10.26352/E618_2384-9509 SN - 2420-9732 VL - 10 PB - Pixel CY - Florenz ER - TY - JOUR A1 - Vladova, Gergana A1 - Gronau, Norbert T1 - KI-basierte Assistenzsysteme in betrieblichen Lernprozessen JF - Industrie 4.0 Management : Gegenwart und Zukunft industrieller Geschäftsprozesse N2 - Assistenzsysteme finden im Kontext der digitalen Transformation immer mehr Einsatz. Sie können Beschäftigte in industriellen Produktionsprozessen sowohl in der Anlern- als auch in der aktiven Arbeitsphase unterstützen. Kompetenzen können so arbeitsplatz- und prozessnah sowie bedarfsorientiert aufgebaut werden. In diesem Beitrag wird der aktuelle Forschungsstand zu den Einsatzmöglichkeiten dieser Assistenzsysteme diskutiert und mit Beispielen illustriert. Es werden unter anderem auch Herausforderungen für den Einsatz aufgezeigt. Am Ende des Beitrags werden Potenziale für die zukünftige Nutzung von AS in industriellen Lernprozessen und für die Forschung identifiziert. KW - KI KW - kognitive Assistenzsysteme KW - betriebliche Lernprozesse KW - Weiterbildung Y1 - 2022 U6 - https://doi.org/10.30844/I40M_22-2_11-14 SN - 2364-9216 SN - 2364-9208 VL - 38 IS - 2 SP - 11 EP - 14 PB - GITO mbH Verlag für Industrielle Informationstechnik und Organisation CY - Berlin ER - TY - CHAP A1 - Vladova, Gergana A1 - Bertheau, Clementine ED - de Witt, Claudia ED - Gloerfeld, Christina ED - Wrede, Silke Elisabeth T1 - Unter dem Zeichen Künstlicher Intelligenz BT - Berufe, Kompetenzen und Kompetenzvermittlung der Zukunft T2 - Künstliche Intelligenz in der Bildung N2 - Der Einsatz Künstlicher Intelligenz (KI) wird zunehmend relevant – sowohl in Berufen mit formalisierbaren Aufgaben als auch in Berufsfeldern, für deren Aufgaben Erfahrungswissen notwendig ist und situationsabhängig Entscheidungen getroffen werden, die mit folgenschweren Konsequenzen verbunden sein können. Um das Potenzial der Zusammenarbeit zwischen Mensch und KI auszuschöpfen, muss sich der Mensch entsprechend wappnen. Somit verändern sich die Kompetenzanforderungen an Mitarbeiter:innen auf allen Ebenen und an ihre Führungskräfte. Relevante Konzepte des lebenslangen Lernens und der betrieblichen Weiterbildung gewinnen durch den Einfluss der Technologie auch unter teilweise veränderten Lernbedingungen vermehrt an Bedeutung. Neben neuen technischen und Fachkompetenzen, sind für die Nutzung von und die Zusammenarbeit mit der neuen Technologie weitere Kompetenzen notwendig, um z. B. einschätzen zu können, wann die Arbeit der Maschine ethisch vertretbar, effektiv, verantwortungsvoll, fair, transparent und nachvollziehbar ist. Auch neue Tätigkeitsprofile entstehen und die beruflichen Rollen verändern sich entsprechend. Neben den Anforderungen, die die KI an Bildung und Kompetenzentwicklung stellt, wird sie weiterhin zunehmend zur Gestaltung von Lernumgebungen und für den Kompetenzaufbau im Beruf eingesetzt. Sie ist somit nicht nur der Auslöser von Veränderungen, sondern auch das Instrument, welches genutzt wird, um die Lehre zu unterstützen und individueller, abwechslungsreicher sowie zeit- und ortunabhängiger zu gestalten. Im Beitrag werden Chancen und Herausforderungen durch den Einsatz von KI für zwei Dimensionen diskutiert: die Transformationsprozesse in der Berufswelt und die Gestaltung von Lernprozessen. KW - Künstliche Intelligenz KW - Weiterbildung KW - Berufsbilder KW - Beruf KW - Kompetenzen Y1 - 2023 SN - 978-3-658-40078-1 SN - 978-3-658-40079-8 U6 - https://doi.org/10.1007/978-3-658-40079-8_19 SP - 393 EP - 410 PB - Springer VS CY - Wiesbaden ER - TY - JOUR A1 - Ullrich, André A1 - Weber, Edzard A1 - Gronau, Norbert T1 - Regionale Refabrikationsnetzwerke BT - Potenziale und Herausforderungen der lokalen Wiederaufarbeitung von Produkten JF - Industrie 4.0 Management : Gegenwart und Zukunft industrieller Geschäftsprozesse N2 - Die Herstellung von Produkten bindet Energie sowie auch materielle Ressourcen. Viel zu langsam entwickeln sich sowohl das Bewusstsein der Konsumenten sowie der Produzenten als auch gesetzgebende Aktivitäten, um zu einem nachhaltigen Umgang mit den zur Verfügung stehenden Ressourcen zu gelangen. In diesem Beitrag wird ein lokaler Remanufacturing-Ansatz vorgestellt, der es ermöglicht, den Ressourcenverbrauch zu reduzieren, lokale Unternehmen zu fördern und effiziente Lösungen für die regionale Wieder- und Weiterverwendung von Gütern anzubieten. KW - Refabrikation KW - Regionale Ansätze KW - Remanufacturing Y1 - 2023 U6 - https://doi.org/10.30844/IM_23-2_11-14 SN - 2364-9208 VL - 39 IS - 2 SP - 11 EP - 14 PB - GITO mbH Verlag CY - Berlin ER - TY - GEN A1 - Ullrich, André A1 - Weber, Edzard A1 - Gronau, Norbert T1 - Regionale Refabrikationsnetzwerke BT - Potenziale und Herausforderungen der lokalen Wiederaufarbeitung von Produkten T2 - Zweitveröffentlichungen der Universität Potsdam : Wirtschafts- und Sozialwissenschaftliche Reihe N2 - Die Herstellung von Produkten bindet Energie sowie auch materielle Ressourcen. Viel zu langsam entwickeln sich sowohl das Bewusstsein der Konsumenten sowie der Produzenten als auch gesetzgebende Aktivitäten, um zu einem nachhaltigen Umgang mit den zur Verfügung stehenden Ressourcen zu gelangen. In diesem Beitrag wird ein lokaler Remanufacturing-Ansatz vorgestellt, der es ermöglicht, den Ressourcenverbrauch zu reduzieren, lokale Unternehmen zu fördern und effiziente Lösungen für die regionale Wieder- und Weiterverwendung von Gütern anzubieten. T3 - Zweitveröffentlichungen der Universität Potsdam : Wirtschafts- und Sozialwissenschaftliche Reihe - 183 KW - Refabrikation KW - Regionale Ansätze KW - Remanufacturing Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-604510 SN - 2364-9208 SN - 1867-5808 IS - 2 ER - TY - JOUR A1 - Ullrich, André A1 - Teichmann, Malte A1 - Gronau, Norbert T1 - Fast trainable capabilities in software engineering-skill development in learning factories JF - Ji suan ji jiao yu = Computer Education / Qing hua da xue N2 - The increasing demand for software engineers cannot completely be fulfilled by university education and conventional training approaches due to limited capacities. Accordingly, an alternative approach is necessary where potential software engineers are being educated in software engineering skills using new methods. We suggest micro tasks combined with theoretical lessons to overcome existing skill deficits and acquire fast trainable capabilities. This paper addresses the gap between demand and supply of software engineers by introducing an actionoriented and scenario-based didactical approach, which enables non-computer scientists to code. Therein, the learning content is provided in small tasks and embedded in learning factory scenarios. Therefore, different requirements for software engineers from the market side and from an academic viewpoint are analyzed and synthesized into an integrated, yet condensed skills catalogue. This enables the development of training and education units that focus on the most important skills demanded on the market. To achieve this objective, individual learning scenarios are developed. Of course, proper basic skills in coding cannot be learned over night but software programming is also no sorcery. KW - learning factory KW - programming skills KW - software engineering KW - training Y1 - 2021 U6 - https://doi.org/10.16512/j.cnki.jsjjy.2020.12.002 SN - 1672-5913 IS - 12 SP - 2 EP - 10 PB - [Verlag nicht ermittelbar] CY - Bei jing shi ER - TY - JOUR A1 - Ullrich, André A1 - Gronau, Norbert T1 - Bestimmung nachhaltiger Anwendungssystemarchitekturen JF - ERP-Management : Auswahl, Einführung und Betrieb von ERP-Systemen N2 - Die teilweise sehr kurzfristig notwendige Reaktion auf Veränderungen erfordert von Unternehmen ein hohes Maß an Flexibilität und Reaktionsgeschwindigkeit. Anwendungssystemarchitekturen, die im Wesentlichen aus alten und selbst entwickelten Systemen bestehen, erfüllen häufig diese Anforderungen nicht. Investitionsmittel für neue Software sind jedoch begrenzt, daher müssen Prioritäten in der Ablösung von Altsystemen gesetzt werden. Eine effiziente Analysemethode zur Planung der Erneuerung der Anwendungssystemlandschaft stellt die Wandlungsfähigkeitsanalyse dar. Dieser Beitrag beschreibt Vorgehen und Ergebnisse am Beispiel eines international tätigen Automobilzulieferers. N2 - The sometimes necessary reaction to changes requires a high degree of adaptability and speed of reaction from companies. Application system architectures, which essentially consist of old and self-developed systems, often do not meet these requirements. However, investment funds for new software are limited, so priorities must be set in the replacement of old systems. An efficient analysis method for planning the renewal of the application system landscape is the adaptability analysis. This article describes the procedure and results using the example of an internationally active automotive supplier. KW - Anpassungsfähigkeit KW - Anwendungssystemarchitekturen KW - Bewertung KW - adaptability KW - application system architectures KW - assessment Y1 - 2020 UR - https://www.wiso-net.de/document/ERP__1ba9f709bedd19d76acba5daebbc08c9befe5b9f U6 - https://doi.org/10.30844/ERP_20-1_54-57 SN - 1860-6725 VL - 16 IS - 1 SP - 54 EP - 57 PB - GITO mbH CY - Berlin ER - TY - CHAP A1 - Ullrich, André A1 - Gronau, Norbert ED - Panetto, Hervé ED - Madani, Kurosh ED - Smirnov, Alexander T1 - Time to change BT - considering the 4th Industrial Revolution from three sustainability perspectives T2 - Proceedings of the International Conference on Innovative Intelligent Industrial Production and Logistics N2 - Industry 4.0 leads to a radical change that is progressing incrementally. The new information and communication technologies provide many conceivable opportunities for their application in the context of sustainable corporate management. The combination of new digital technologies with the ecological and social goals of companies offers a multitude of unimagined potentials and challenges. Although companies already see the need for action, there was in the past and currently still is a lack of concrete measures that lever the potential of Industry 4.0 for sustainability management. During the course of this position paper we develop six theses (two from each sustainability perspective) against the background of the current situation in research and practice, and policy. KW - industry 4.0 KW - sustainability KW - triple bottom line Y1 - 2020 SN - 978-989-758-476-3 U6 - https://doi.org/10.5220/0010148601090116 SP - 109 EP - 116 PB - SciTePress CY - [Erscheinungsort nicht ermittelbar] ER - TY - JOUR A1 - Ullrich, Andre A1 - Bertheau, Clementine A1 - Wiedmann, Miriam A1 - Sultanow, Eldar A1 - Körppen, Tim A1 - Bente, Stefan T1 - Roles, tasks and skills of the enterprise architect in the VUCA world JF - 2021 IEEE 25th International Enterprise Distributed Object Computing Conference Workshops : EDOCW 2021 : 25-29 October 2021, Gold Coast, Australia : proceedings N2 - For the last 20 years, enterprise architecture management (EAM) was primarily an instrument for harmonizing and consolidating IT landscapes and is lived as a transformation and governance discipline. It, however, is rather related to IT strategy than aligned to the actual corporate strategy and the work of the enterprise architect is characterized by tasks like prescribing, monitoring, documenting, and controlling. As digital transformation continues apace, companies are facing new challenges that lead to a volatile, uncertain, complex, and ambiguous (VUCA) world. To face these challenges, vision, understanding, clarity and agility allow to anticipative and implement necessary changes. This, of course, has implications for the role of the enterprise architect. S/he needs to start actively supporting innovation and taking more of an advisory role instead of just being driven by the current state of the enterprise architecture. This paper investigates the role of the enterprise architect in the VUCA world. Based on current literature and expert interviews, a survey was conducted among consultants who work as (or with) enterprise architects. Survey results include the evaluation of statements on current tasks of enterprise architects, their influence on projects and companies as well as future requirements on the roles of the enterprise architect. The results from the survey were synthesized with the findings from literature to derive the roles, tasks and skills of enterprise architect in the VUCA world. KW - enterprise architecture management KW - skills KW - roles KW - enterprise architect KW - VUCA Y1 - 2021 SN - 978-1-6654-4488-0 U6 - https://doi.org/10.1109/EDOCW52865.2021.00057 SP - 261 EP - 270 PB - IEEE CY - Piscataway ER - TY - JOUR A1 - Tiberius, Victor A1 - Weyland, Michael A1 - Mahto, Raj V. T1 - Best of entrepreneurship education? BT - a curriculum analysis of the highest-ranking entrepreneurship MBA programs JF - The international journal of management education N2 - Entrepreneurship education has gained widespread attention in both education practice and research over the past three decades. However, whereas research has a strong focus on its effects and many normative concepts exist, little is known about how entrepreneurship is actually taught. To address this research gap, we conduct a curriculum analysis of the 50 best programs in entrepreneurship, according to the 2018 Financial Times ranking “Top MBAs for Entrepreneurship 2018”. In particular, we examine their objectives, learning contents and teaching as well as assessment methods as four major dimensions of a graduate entrepreneurship curriculum. The results show that the programs are primarily business and management programs, with a comparatively small share of entrepreneurship itself. Entrepreneurship-specific goals are entrepreneurial attitudes and competences, such as entrepreneurial leadership, entrepreneurial mindset, entrepreneurial skills, opportunity creation, opportunity identification, and transforming uncertainty into opportunity. The learning contents also focus on business, management, and law, whereas the contents relating to entrepreneurship include entrepreneurial failure, entrepreneurial management, entrepreneurial thinking, and entrepreneurship in general. Teaching methods are mainly the ones usually found in higher education, with business plans and prototyping as additional entrepreneurial ones. Assessment methods do not differ from those in business and management education. KW - entrepreneurship education KW - curriculum analysis KW - ranking KW - best practice Y1 - 2022 U6 - https://doi.org/10.1016/j.ijme.2022.100753 SN - 1472-8117 SN - 2352-3565 VL - 21 IS - 1 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Tiberius, Victor A1 - Weyland, Michael T1 - Enhancing higher entrepreneurship education: insights from practitioners for curriculum improvement JF - The International journal of Management Education N2 - Curricula for higher entrepreneurship education should meet the requirements of both a solid theoretical foundation and a practical orientation. When these curricula are designed by education specialists, entrepreneurs are usually not consulted. To explore practitioners’ curricular recommendations, we conducted 73 semi-structured interviews with entrepreneurs with at least five years of professional experience. We collected 49 items for teaching and learning objectives, 37 for contents, 28 for teaching methods, and 17 for assessment methods. The respondents are convinced that students should acquire solid knowledge in business and management, legal issues, and entrepreneurship. For the latter, only some core aspects are provided. The entrepreneurs put greater emphasis on entrepreneurial skills and attitudes and consider experiential learning designs as most suitable, both in the secure setting of the classroom and in real life. The findings can help reflect on current entrepreneurship curriculum designs. KW - curriculum design KW - curriculum development KW - entrepreneurship education Y1 - 2024 U6 - https://doi.org/10.1016/j.ijme.2024.100981 SN - 1472-8117 SN - 2352-3565 VL - 22 IS - 2 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Tiberius, Victor A1 - Weyland, Michael T1 - Entrepreneurship education or entrepreneurship education? BT - a bibliometric analysis JF - Journal of further and higher education N2 - Entrepreneurship education (EE) has attracted much scholarly attention, showing exponential growth in publication and citation numbers. The research field has become broad, complex, and fragmented, making it increasingly difficult to oversee. Our research goal is to organise and integrate the previous literature. To this end, we use bibliometric analyses, differing from prior analyses, which are outdated or have a different focus. Our results show an immense growth in publications and citations over the last decade and an almost equal involvement of business and educational research. We identify the most productive and influential journals and authors. Our co-citation analysis reveals two research clusters, one focusing on psychological constructs relating to EE, and the other on entrepreneurial behaviour and new venture creation. Based on a review of the 25 most-cited articles on an annual basis, we identify and quantify the most relevant research themes and integrate them into a research framework that we propose for future research. A major finding is that extant research centres around the outcomes of entrepreneurship education, whereas its pedagogy is still mainly a black box. KW - Bibliometric analysis KW - co-citation analysis KW - education; KW - entrepreneurship KW - entrepreneurship education KW - performance analysis Y1 - 2022 U6 - https://doi.org/10.1080/0309877X.2022.2100692 SN - 0309-877X SN - 1469-9486 VL - 47 IS - 1 SP - 134 EP - 149 PB - Routledge, Taylor & Francis Group CY - Abingdon ER - TY - GEN A1 - Tiberius, Victor A1 - Weyland, Michael T1 - Entrepreneurship education or entrepreneurship education? BT - a bibliometric analysis T2 - Zweitveröffentlichungen der Universität Potsdam : Wirtschafts- und Sozialwissenschaftliche Reihe N2 - Entrepreneurship education (EE) has attracted much scholarly attention, showing exponential growth in publication and citation numbers. The research field has become broad, complex, and fragmented, making it increasingly difficult to oversee. Our research goal is to organise and integrate the previous literature. To this end, we use bibliometric analyses, differing from prior analyses, which are outdated or have a different focus. Our results show an immense growth in publications and citations over the last decade and an almost equal involvement of business and educational research. We identify the most productive and influential journals and authors. Our co-citation analysis reveals two research clusters, one focusing on psychological constructs relating to EE, and the other on entrepreneurial behaviour and new venture creation. Based on a review of the 25 most-cited articles on an annual basis, we identify and quantify the most relevant research themes and integrate them into a research framework that we propose for future research. A major finding is that extant research centres around the outcomes of entrepreneurship education, whereas its pedagogy is still mainly a black box. T3 - Zweitveröffentlichungen der Universität Potsdam : Wirtschafts- und Sozialwissenschaftliche Reihe - 192 KW - bibliometric analysis KW - co-citation analysis KW - education KW - entrepreneurship KW - entrepreneurship education KW - performance analysis Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-608789 SN - 1867-5808 IS - 1 ER - TY - JOUR A1 - Tiberius, Victor A1 - Stiller, Laura A1 - Dabić, Marina T1 - Sustainability beyond economic prosperity BT - social microfoundations of dynamic capabilities in family businesses JF - Technological forecasting and social change N2 - Family businesses strive not only for economic prosperity but also for social and environmental values and achievements. In an ever-changing business environment, dynamic capabilities are required to sustain performance across these areas. To understand these mechanisms in order to proactively manage them, it is necessary to identify their specific microfoundations and uncover how these relate to sustainability. However, research on sustainability dynamic capabilities in family businesses and their microfoundations is scarce. To address this research gap, we conducted semi-structured interviews with 11 German and Swiss family businesses from different industries of different ages and sizes. Our findings suggest that the majority of dynamic capability microfoundations relate to economic sustainability, with a specific focus on future orientation, traditional mindsets, rapid decision-making, intuition, speed, and resource slack. Further, we find the social aspects of innovative mindsets, human capital investments, and participation to be the specific microfoundations that strongly link with social and, eventually, economic sustainability. However, we did not find specific microfoundations for environmental sustainability. Y1 - 2021 U6 - https://doi.org/10.1016/j.techfore.2021.121093 SN - 0040-1625 VL - 173 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Tiberius, Victor A1 - Siglow, Caroline A1 - Sendra-García, Javier T1 - Scenarios in business and management BT - the current stock and research opportunities JF - Journal of business research N2 - The scenario technique is widely used to cope with uncertainties plan for alternate future situations. The extensive research led to a scattered literature landscape. To organize the field quantitatively, we conduct bibliometric performance analyses and a bibliographic coupling analysis. Results show an increased interest in scenario research since 2009 and clear distinctions between strategic and operational as well as methodological and applied research. Future research can be expected to further enhance the method towards robust decision making and to combine it with methods searching for most likely scenarios, such as prediction markets, crowdsourcing, and superforecasting. Additionally, cognitive and behavioral aspects of using the scenario technique might draw further attention. The scenario technique is expected to be applied across all industries and will probably play an increasing role in currently underrepresented business functions such as marketing and innovation. KW - scenario analysis KW - bibliographic coupling KW - bibliometric analysis Y1 - 2020 U6 - https://doi.org/10.1016/j.jbusres.2020.08.037 SN - 0148-2963 SN - 1873-7978 VL - 121 SP - 235 EP - 242 PB - Elsevier CY - New York ER - TY - CHAP A1 - Tiberius, Victor ED - Hölzle, Katharina ED - Tiberius, Victor ED - Surrey, Heike T1 - Traits, Kognition, Kompetenzen, Verhalten? BT - Erfolgsdeterminanten im Entrepreneurship T2 - Perspektiven des Entrepreneurships : Unternehmerische Konzepte zwischen Theorie und Praxis Y1 - 2020 UR - https://www.wiso-net.de/document/SPEB__80ed5110e71fb95c3b3bfc1ebb8fa2cd6e141477 SN - 978-3-7910-4473-6 SN - 978-3-7910-4471-2 SN - 978-3-7910-4472-9 SP - 21 EP - 31 PB - Schäffer-Poeschel Verlag CY - Stuttgart ER - TY - JOUR A1 - Tiberius, Victor T1 - Scenarios in the strategy process BT - A framework of affordances and constraints JF - European Journal of Futures Research N2 - This paper challenges the solely rational view of the scenario technique as a strategy and foresight tool designed to cope with uncertainty by considering multiple possible future states. The paper employs an affordance-based view that allows for the identification and structuring of hidden, emergent attributes of the scenario technique beyond the intended ones. The suggested framework distinguishes between affordances (1) that are intended by the organization and relate to its goals, (2) that emergently generate organizational benefits, and (3) that do not relate to organizational but individual interests. Also, constraints in the use of scenarios are discussed. Affordance theory’s specific lens shows that the emergence of such attributes depends on the users’ specific intentions. KW - Affordances KW - Management KW - Organizations KW - Scenario planning KW - Strategic foresight Y1 - 2019 U6 - https://doi.org/10.1186/s40309-019-0160-5 SN - 2195-4194 SN - 2195-2248 VL - 7 PB - Springer Open CY - London ER - TY - JOUR A1 - Thim, Christof A1 - Ullrich, André A1 - Gronau, Norbert T1 - Process model driven learning scenario implementation JF - Procedia manufacturing N2 - The implementation of learning scenarios is a diversely challenging, frequently purely manual and effortful undertaking. In this contribution a process based view is used in scenario generation to overcome communication, coordination and technical gaps. A framework is provided to identify, define and integrate technological artefacts and learning content as modular, reusable building blocks along a modeled production process. The specific contribution is twofold: 1) the theoretical framework represents a unique basis for modularization of content and technology in order to enhance reusability, 2) the model based scenario definition is a starting point for automated implementation of learning scenarios in industrial learning environments that has not been created before. KW - learning factories KW - learning scenario implementation KW - process modelling Y1 - 2020 U6 - https://doi.org/10.1016/j.promfg.2020.04.071 SN - 2351-9789 VL - 45 SP - 522 EP - 527 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Thim, Christof A1 - Ullrich, André A1 - Eigelshoven, Felix A1 - Gronau, Norbert A1 - Ritter, Ann-Carolin T1 - Crowdsourcing bei industriellen Innovationen T1 - Crowdsourcing for industrial innovations BT - Lösungsansätze und Herausforderung für KMU BT - solutions and challenges for SMEs JF - Industrie 4.0 Management : Gegenwart und Zukunft industrieller Geschäftsprozesse N2 - Die Innovationstätigkeit im industriellen Umfeld verlagert sich durch die Digitalisierung hin zu Produkt-Service-Systemen. Kleine und mittlere Unternehmen haben sich in ihrer Entwicklungstätigkeit bisher stark auf die Produktentwicklung bezogen. Der Umstieg auf „smarte“ Produkte und die Kopplung an Dienstleistungen erfordert häufig personelle und finanzielle Ressourcen, welche KMU nicht aufbringen können. Crowdsourcing stellt eine Möglichkeit dar, den Innovationsprozess für externe Akteure zu öffnen und Kosten- sowie Geschwindigkeitsvorteile zu realisieren. Bei der Integration von Crowdsourcing-Elementen ist jedoch einigen Herausforderungen zu begegnen. Dieser Beitrag zeigt sowohl die Potenziale als auch die Barrieren einer Crowdsourcing-Nutzung im industriellen Umfeld auf. N2 - Innovation activity in the industrial environment is shifting towards product-service systems as a result of digitalisation. Small and medium-sized enterprises have so far focused their development activities strongly on product development. The switch to “smart” products and the coupling to services often requires personnel and financial resources that SMEs cannot provide. Crowdsourcing is one way of opening up the innovation process to external actors and realising cost and speed advantages. However, the integration of crowdsourcing elements faces several challenges. This article shows both the potentials and the barriers of crowdsourcing in the industrial environment. KW - Crowdsourcing KW - industrielle Innovationen KW - KMU KW - industrial innovation KW - SMEs Y1 - 2020 U6 - https://doi.org/10.30844/I40M_20-6_S9-13 SN - 2364-9208 VL - 36 IS - 6 SP - 9 EP - 13 PB - GITO mbH Verlag CY - Berlin ER - TY - CHAP A1 - Thim, Christof A1 - Grum, Marcus A1 - Schüffler, Arnulf A1 - Roling, Wiebke A1 - Kluge, Annette A1 - Gronau, Norbert ED - Andersen, Ann-Louise ED - Andersen, Rasmus ED - Brunoe, Thomas Ditlev ED - Larsen, Maria Stoettrup Schioenning ED - Nielsen, Kjeld ED - Napoleone, Alessia ED - Kjeldgaard, Stefan T1 - A concept for a distributed Interchangeable knowledge base in CPPS T2 - Towards sustainable customization: cridging smart products and manufacturing systems N2 - As AI technology is increasingly used in production systems, different approaches have emerged from highly decentralized small-scale AI at the edge level to centralized, cloud-based services used for higher-order optimizations. Each direction has disadvantages ranging from the lack of computational power at the edge level to the reliance on stable network connections with the centralized approach. Thus, a hybrid approach with centralized and decentralized components that possess specific abilities and interact is preferred. However, the distribution of AI capabilities leads to problems in self-adapting learning systems, as knowledgebases can diverge when no central coordination is present. Edge components will specialize in distinctive patterns (overlearn), which hampers their adaptability for different cases. Therefore, this paper aims to present a concept for a distributed interchangeable knowledge base in CPPS. The approach is based on various AI components and concepts for each participating node. A service-oriented infrastructure allows a decentralized, loosely coupled architecture of the CPPS. By exchanging knowledge bases between nodes, the overall system should become more adaptive, as each node can “forget” their present specialization. KW - learning KW - distributed knowledge base KW - artificial intelligence KW - CPPS Y1 - 2021 SN - 978-3-030-90699-3 SN - 978-3-030-90702-0 SN - 978-3-030-90700-6 U6 - https://doi.org/10.1007/978-3-030-90700-6_35 SP - 314 EP - 321 PB - Springer CY - Cham ER - TY - CHAP A1 - Thim, Christof A1 - Gronau, Norbert A1 - Haase, Jennifer A1 - Grum, Marcus A1 - Schüffler, Arnulf A1 - Roling, Wiebke A1 - Kluge, Annette ED - Shishkov, Boris T1 - Modeling change in business processes T2 - Business modeling and software design N2 - Business processes are regularly modified either to capture requirements from the organization’s environment or due to internal optimization and restructuring. Implementing the changes into the individual work routines is aided by change management tools. These tools aim at the acceptance of the process by and empowerment of the process executor. They cover a wide range of general factors and seldom accurately address the changes in task execution and sequence. Furthermore, change is only framed as a learning activity, while most obstacles to change arise from the inability to unlearn or forget behavioural patterns one is acquainted with. Therefore, this paper aims to develop and demonstrate a notation to capture changes in business processes and identify elements that are likely to present obstacles during change. It connects existing research from changes in work routines and psychological insights from unlearning and intentional forgetting to the BPM domain. The results contribute to more transparency in business process models regarding knowledge changes. They provide better means to understand the dynamics and barriers of change processes. KW - intentional forgetting KW - routines KW - business processes KW - unlearning Y1 - 2023 SN - 978-3-031-36756-4 SN - 978-3-031-36757-1 U6 - https://doi.org/10.1007/978-3-031-36757-1_1 SP - 3 EP - 17 PB - Springer Nature CY - Cham ER - TY - THES A1 - Theuer, Hanna Katharina T1 - Beherrschung komplexer Produktionsprozesse durch Autonomie T1 - Mastering complex production processes by autonomy N2 - Modern technologies enable the actors of a production process to autonomous decision-making, information-processing, and decision- execution. It devolves hierarchical controlled relationships and distributes decision-making among many actors. Positive consequences include using local competencies and fast on-site action without (time-)consuming cross-process planning run by a central control instance. Evaluating the decentralization of the process helps to compare different control strategies and thus contributes to the mastery of more complex production processes. Although the importance of the communication structure of these actors increases, no method uses this as a basis for operationalizing decentralization. This motivates the focus of this thesis. It develops a three-level evaluation model determining the decentralization of a production process based on two determinants: the communication and decision-making structure of the autonomous actors involved. Based on a definition of decentralization of production processes, it set requirements for a key value that determines the structural autonomy of the actors and selects a suitable social network analysis metric. The possibility of integrated decision-making and decision execution justifies the additional consideration of the decision structure. The differentiation of both factors forms the basis for the classification of actors; the multiplication of both values results in the characteristic value real autonomy describing the autonomy of an actor, which is the key figure of the model's first level. Homogeneous actor autonomy characterizes a high decentralization of the process step, which is the object of consideration of the second level of the model. Comparing the existing with the maximum possible decentralization of the process steps determines the Autonomy Index. This figure operationalizes the decentralization of the process at the third level of the model. A simulation study with two simulation experiments - a central and a decentral controlled process - at Zentrum Industrie 4.0 validates the evaluation model. The application of the model to an industrial production process underlines the practical applicability. N2 - Moderne Technologien befähigen die beteiligten Akteure eines Produktionsprozesses die Informationsaufnahme, Entscheidungsfindung und -ausführung selbstständig auszuführen. Hierarchische Kontrollbeziehungen werden aufgelöst und die Entscheidungsfindung auf eine Vielzahl von Akteuren verteilt. Positive Folgen sind unter anderem die Nutzung lokaler Kompetenzen und ein schnelles Handeln vor Ort ohne (zeit-)aufwändige prozessübergreifende Planungsläufe durch eine zentrale Steuerungsinstanz. Die Bewertung der Dezentralität des Prozesses hilft beim Vergleich verschiedener Steuerungsstrategien und trägt so zur Beherrschung komplexerer Produktionsprozesse bei. Obwohl die Kommunikationsstruktur der an der Entscheidungsfindung beteiligten Akteure zunehmend an Bedeutung gewinnt, existiert keine Methode, welche diese als Grundlage für die Operationalisierung der Dezentralität verwendet. Hier setzt diese Arbeit an. Es wird ein dreistufiges Bewertungsmodell entwickelt, dass die Dezentralität eines Produktionsprozesses auf Basis der Kommunikations- und Entscheidungsstruktur der am Prozess beteiligten, autonomen Akteure ermittelt. Aufbauend auf einer Definition von Dezentralität von Produktionsprozessen werden Anforderungen an eine Kennzahl erhoben und - auf Basis der Kommunikationsstruktur - eine die strukturelle Autonomie der Akteure bestimmenden Kenngröße der sozialen Netzwerkanalyse ermittelt. Die Notwendigkeit der zusätzlichen Berücksichtigung der Entscheidungsstruktur wird basierend auf der Möglichkeit der Integration von Entscheidungsfindung und -ausführung begründet. Die Differenzierung beider Faktoren bildet die Grundlage für die Klassifikation der Akteure; die Multiplikation beider Werte resultiert in dem die Autonomie eines Akteurs beschreibenden Kennwert tatsächliche Autonomie, welcher das Ergebnis der ersten Stufe des Modells darstellt. Homogene Akteurswerte charakterisieren eine hohe Dezentralität des Prozessschrittes, welcher Betrachtungsobjekt der zweiten Stufe ist. Durch einen Vergleich der vorhandenen mit der maximal möglichen Dezentralität der Prozessschritte wird auf der dritten Stufe der Autonomie Index ermittelt, welcher die Dezentralität des Prozesses operationalisiert. Das erstellte Bewertungsmodell wird anhand einer Simulationsstudie im Zentrum Industrie 4.0 validiert. Dafür wird das Modell auf zwei Simulationsexperimente - einmal mit einer zentralen und einmal mit einer dezentralen Steuerung - angewendet und die Ergebnisse verglichen. Zusätzlich wird es auf einen umfangreichen Produktionsprozess aus der Praxis angewendet. KW - Produktion KW - Autonomie KW - Prozessverbesserung KW - Dezentralität KW - Produktionssteuerung KW - autonomy KW - decentrality KW - production KW - production control KW - process improvement Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-541842 ER - TY - JOUR A1 - Teichmann, Malte A1 - Vladova, Gergana A1 - Gronau, Norbert T1 - Conception of subject-oriented learning BT - ameso-didactic design framework for learning scenarios for manufacturing JF - SSRN eLibrary / Social Science Research Network N2 - Competence development must change at all didactic levels to meet the new requirements triggered by digitization. Unlike classic learning theories and the resulting popular approaches (e.g., sender-receiver model), future-oriented vocational training must include new learning theory impulses in the discussion about competence acquisition. On the one hand, these impulses are often very well elaborated on the theoretical side, but the transfer into innovative learning environments - such as learning factories - is often still missing. On the other hand, actual learning factory (design) approaches often concentrate primarily on the technical side. Subject-oriented learning theory enables the design of competence development-oriented vocational training projectsin learning factories in which persons can obtain relevant competencies for digitization. At the same time, such learning theory approaches assume a potentially infinite number of learning interests and reasons. Following this, competence development is always located in an institutional or organizational context. The paper conceptionally answers how this theoryimmanent challenge is synthesizable with the reality of organizationally competence development requirements. KW - subject-oriented learning KW - learning scenario for manufacturing KW - didactic framework KW - action problems KW - didactic concept Y1 - 2023 U6 - https://doi.org/10.2139/ssrn.4457995 SN - 1556-5068 PB - Social Science Electronic Publ. CY - [Erscheinungsort nicht ermittelbar] ER - TY - JOUR A1 - Teichmann, Malte A1 - Ullrich, André A1 - Wenz, Julian A1 - Gronau, Norbert T1 - Herausforderungen und Handlungsempfehlungen betrieblicher Weiterbildungspraxis in Zeiten der Digitalisierung T1 - Challenges and recommended actions for in-company vocational training in times of digitization JF - HMD Praxis der Wirtschaftsinformatik N2 - Die Digitalisierung von Produktionsprozessen schreitet mit einer hohen Intensität voran. Weiterbildung hat eine hohe Relevanz für betriebliche Transformationsprozesse. Die betriebliche Weiterbildungspraxis ist den aktuellen Herausforderungen der Digitalisierung jedoch nicht gewachsen. Herausforderungen sind Kompetenzlücken der Mitarbeiter, ungewisse Anforderungsprofile und Tätigkeitstypen, demographischer Wandel sowie veraltete didaktische Ansätze. Zudem wird bestehender inhaltlicher und pädagogischer Freiraum bei der Gestaltung von Weiterbildung oftmals nur unzureichend ausgenutzt. Die skizzierte Situation führt dazu, dass der Mehrwert gegenwärtiger Qualifizierungsangebote sowohl für Unternehmen als auch Beschäftigte nicht ausgeschöpft wird. Ausgehend von Veränderungen durch Digitalisierung in der Produktion und deren Auswirkungen auf die Kompetenzentwicklung diskutiert dieser Beitrag Herausforderungen gegenwärtiger betrieblicher Weiterbildung. Er leitet Handlungsempfehlungen ab, die mithilfe von Beispielen gewerkschaftlich unterstützter Weiterbildungspraxis illustriert werden. Im Ergebnis erhalten Interessierte einen Überblick über gegenwärtige Herausforderungen und Handlungsempfehlungen für die Gestaltung und Durchführung von Weiterbildung in Zeiten der Digitalisierung. N2 - The digital transformation of production processes is constantly progressing. The human workforce is a central success factor, but employees must be prepared for the requirements induced by change, using inter alia competence development. In reality, however, the content-related and pedagogical freedom to design vocational training is often inadequately addressed. Based on the changes trough digitization in production processes, the challenges of current continuing vocational training in enterprises are discussed. Recommendations for action are then derived and illustrated by examples. The recommendations for action can serve as a basis for the design and implementation of their further vocational training practice. KW - betriebliche Weiterbildungspraxis KW - Digitalisierung von Produktionsprozessen KW - gewerkschaftlich unterstützte Weiterbildungspraxis KW - Kompetenzentwicklung KW - vocational training KW - digitization of production processes KW - labour union education KW - competence development Y1 - 2020 U6 - https://doi.org/10.1365/s40702-020-00614-x SN - 1436-3011 SN - 2198-2775 VL - 57 SP - 512 EP - 527 PB - Springer Vieweg CY - Wiesbaden ER - TY - JOUR A1 - Teichmann, Malte A1 - Ullrich, André A1 - Kotarski, David A1 - Gronau, Norbert T1 - Facing the demographic change BT - recommendations for designing learning factories as age-appropriate teaching-learning environments for older blue-collar workers JF - SSRN eLibrary / Social Science Research Network N2 - Digitization and demographic change are enormous challenges for companies. Learning factories as innovative learning places can help prepare older employees for the digital change but must be designed and configured based on their specific learning requirements. To date, however, there are no particular recommendations to ensure effective age-appropriate training of bluecollar workers in learning factories. Therefore, based on a literature review, design characteristics and attributes of learning factories and learning requirements of older employees are presented. Furthermore, didactical recommendations for realizing age-appropriate learning designs in learning factories and a conceptualized scenario are outlined by synthesizing the findings. KW - learning factory KW - vocational training KW - learning environment KW - age-appropriate competence development KW - demographic change Y1 - 2021 U6 - https://doi.org/10.2139/ssrn.3858716 SN - 1556-5068 PB - Social Science Electronic Publ. CY - [Erscheinungsort nicht ermittelbar] ER - TY - JOUR A1 - Teichmann, Malte A1 - Ullrich, André A1 - Knost, Dennis A1 - Gronau, Norbert T1 - Serious games in learning factories BT - perpetuating knowledge in learning loops by game-based learning JF - Procedia manufacturing N2 - The usage of gamification in the contexts of commerce, consumption, innovation or eLearning in schools and universities has been extensively researched. However, the potentials of serious games to transfer and perpetuate knowledge and action patterns in learning factories have not been levered so far. The goal of this paper is to introduce a serious game as an instrument for knowledge transfer and perpetuation. Therefore, reqirements towards serious games in the context of learning factories are pointed out. As a result, that builds on these requirements, a serious learning game for the topic of Industry 4.0 is practically designed and evaluated. KW - game-based learning KW - gamification KW - serious game KW - learning factories Y1 - 2020 U6 - https://doi.org/10.1016/j.promfg.2020.04.104 SN - 2351-9789 VL - 45 SP - 259 EP - 264 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Teichmann, Malte A1 - Ullrich, André A1 - Bender, Benedict A1 - Gronau, Norbert T1 - Mobile IIoT-Technologien in hybriden Lernfabriken T1 - Using Mobile IIoT-Technologies in Hybrid Learning Factories BT - Szenariobasierte Entwicklung von Handlungskompetenz im Anwendungszentrum Industrie 4.0 BT - a Scenario-Based Development of Acting Capability in the Application Center Industry 4.0 JF - Industrie 4.0 Management N2 - Der Wandel zur automatisierten Produktion, die fortschreitende Digitalisierung der Wertschöpfungsprozesse sowie die stetige Implementierung von mobilen Industrial Internet of Things-Technologien (IIoT) in diese zur Unterstützung der Mitarbeiter stellen betriebliche Weiterbildung vor Herausforderungen. Komple-xere Anforderungen und veränderte Tätigkeitsprofile erfordern Handlungskom-petenzen bei Mitarbeitern im Sinne der Fähigkeit, in unbekannten Situationen auf Basis eigenen Könnens handlungsfähig zu bleiben. Jene sowie dafür notwendiges umfassendes Verständnis gegenüber digitalisierten Produktions-prozessen kann jedoch durch konventionelle Lehrmethoden nicht realisiert werden, da diese der erhöhten Anforderungskomplexität und den komplexen Rückkopplungen im Rahmen der Steuer- und Regelkreise nicht gerecht werden können. Diese Aspekte aufgreifend wird im Folgenden ein szenariobasierter Wei-terbildungsansatz für eine Lernfabrik vorgestellt, der insbesondere die Potenziale mobiler IIoT-Technologien zur Ausgestaltung dieser in den Blick nimmt. N2 - Recently, implementation procedures of automatic production, digitalization and Industrial Internet of Things technologies (IIoT) play an increasing role in industrial manufacturing processes. Subsequently, the competence requirements for employees change. These changes cannot be anticipated by traditional learning approaches. The following contribution faces this challenge and will show a new integrated learning factory approach which combines the application of new technologies with a flexible production environment. Thus establishing production surroundings that are familiar to the learner. The contribution demonstrates this approach using a quality control process in the context of logistics. KW - Mobile IIoT-Technologie KW - Lernszenario KW - Anwendungszentrum Industrie 4.0 KW - Lernfabrik KW - mobile IIoT-technologies KW - learning scenario KW - application center Industrie 4.0 KW - digital learning factory Y1 - 2018 U6 - https://doi.org/10.30844/I40M_18-3_S21-24 SN - 2364-9208 VL - 34 IS - 3 SP - 21 EP - 24 PB - GITO CY - Berlin ER - TY - CHAP A1 - Teichmann, Malte A1 - Lass, Sander A1 - Ullrich, André A1 - Gronau, Norbert ED - Weber, Kristin ED - Reinheimer, Stefan T1 - Modellfabriken als Enabler flexibler Lehr- und Lernsituationen für die Kompetenzentwicklung im Fabrikkontext BT - die Lernfabrik des Zentrums Industrie 4.0 Potsdam T2 - Faktor Mensch N2 - Dieses Kapitel diskutiert die Notwendigkeit einer stärkeren Praxisorientierung für die Schaffung konkreter Lehr- und Lernräume in Unternehmen und zeigt die Vorteile einer Lernfabrik vor dem Hintergrund der stattfindenden Digitalisierung als Mittel zur Kompetenzentwicklung auf. Die technologiebedingt erweiterten Weiterbildungsziele erfordern die Nutzung geeigneter Konzepte und Lösungen. Dahingehend erfolgt die zielorientierte Konkretisierung der Kreation geeigneter Lehr- und Lernsituationen. Die Darstellung der Nutzbarmachung einer Modellfabrik als Lernfabrik der betrieblichen Weiterbildungspraxis zeigt nicht nur eine Lösung für die intendierte Bereitstellung flexibler Lehr- und Lernsituationen, sondern liefert ebenso Handlungsempfehlungen und Best-Practices für die erfolgreiche Kompetenzentwicklung. Insbesondere Praktiker profitieren von der Darstellung der Lernfabrik: aus dieser können sowohl betriebliche Weiterbildner als auch Geschäftsverantwortliche Implikationen für die didaktische Transformation betrieblicher Arbeitsorte in betriebliche Lern-Orte ableiten. Die detaillierte Darstellung einer Tagesschulung zum Thema Auswirkungen von Industrie 4.0 auf die Arbeit der Mitarbeiter sowie Illustration eines Lernszenarios geben reale Einblicke, wie betriebliche Weiterbildung abseits von Lehr-Lern-Kurzschluss-orientierter Didaktik gelingt. KW - betriebliche Weiterbildung KW - Digitalisierung KW - Modellfabrik KW - Lehr-Lernsituationen KW - Industrie 4.0 KW - Zentrum Industrie 4.0 Y1 - 2022 SN - 978-3-658-34523-5 SN - 978-3-658-34524-2 U6 - https://doi.org/10.1007/978-3-658-34524-2_10 N1 - vollständig überarbeiteter und erweiterter Beitrag basierend auf dem Artikel „Herausforderungen und Handlungsempfehlungen betrieblicher Weiterbildungspraxis in Zeiten der Digitalisierung“ von Malte Teichmann, André Ullrich, Julian Wenz, Norbert Gronau, HMD Heft 333, Stefan Reinheimer, Kristin Weber (Hrsg.): Faktor Mensch, Juni 2020, S. 512–527. SP - 173 EP - 196 PB - Springer Fachmedien CY - Wiesbaden ER - TY - CHAP A1 - Teichmann, Malte A1 - Busse, Jana A1 - Gonnermann, Jana A1 - Reimann, Daniela A1 - Ritterbusch, Georg David A1 - Langemeyer, Ines A1 - Gronau, Norbert ED - Nitsch, Verena ED - Brandl, Christopher ED - Häußling, Roger ED - Roth, Philip ED - Gries, Thomas ED - Schmenk, Bernhard T1 - Konzeption, Erstellung und Evaluation von VR-Räumen für die betriebliche Weiterbildung in KMU BT - Erfahrungen und Handlungsempfehlungen aus dem Forschungsprojekt API-KMU T2 - Digitalisierung der Arbeitswelt im Mittelstand 3 N2 - Der Beitrag adressiert die Erstellung von Virtual-Reality gestützten (Lehr- und Lern-) Räumen für die betriebliche Weiterbildung im Rahmen eines Forschungsprojektes. Der damit verbundene Konzeptions- und Umsetzungsprozess ist mit verschiedenen Herausforderungen verbunden: einerseits ist Virtual-Reality ein vergleichsweise neues Lehr- und Lernmedium, womit wenig praktische Handreichungen zur praktischen Umsetzung existieren. Andererseits existieren theoretisch-konzeptionelle Ansätze zur Gestaltung digitaler Lehr- und Lernarrangements, die jedoch 1) oft Gefahr laufen, an den realen Bedürfnissen der Praxis „vorbei“ zu gehen und 2) zumeist nicht konkret Virtual-Reality bzw. damit verbundene Lehr- und Lernumgebungen adressieren. In dieser Folge sind Best-Practice Beispiele basierend auf erfolgreichen Umsetzungsvorhaben, die nachfolgenden Projekten als „Wegweiser“ dienen könnten, äußerst rar. Der Beitrag setzt an dieser Stelle an: basierend auf zwei real existierenden betrieblichen Anwendungsfällen aus den Bereichen Natursteinbearbeitung sowie Einzel- und Sondermaschinenbau werden Herausforderungen und Lösungswege des Erstellungsprozesses von Virtual-Reality gestützten (Lehr- und Lern-)Räumen beschrieben. Ebenfalls werden basierend auf den gemachten Projekterfahrungen Handlungsempfehlungen für die gelingende Konzeption, Umsetzung und Evaluation dieser Räume formuliert. Betriebliche Beschäftigte aus den Bereichen Aus- und Weiterbildung, Management oder Human Ressources, die in eigenen Projekten im Bereich Virtual Reality aktiv werden wollen, profitieren von den herausgestellten praktischen Handreichungen. Forschende Personen sollen Anregungen für weiterführende Forschungsvorhaben erhalten. Y1 - 2023 SN - 978-3-662-67023-1 SN - 978-3-662-67024-8 U6 - https://doi.org/10.1007/978-3-662-67024-8_5 SP - 155 EP - 204 PB - Springer Vieweg CY - Berlin ER - TY - THES A1 - Teetz, Tim T1 - Work design and leadership in lean production Y1 - 2022 ER - TY - CHAP A1 - Sultanow, Eldar A1 - Chircu, Alina A1 - Wüstemann, Stefanie A1 - Schwan, André A1 - Lehmann, Andreas A1 - Sept, André A1 - Szymaski, Oliver A1 - Venkatesan, Sripriya A1 - Ritterbusch, Georg David A1 - Teichmann, Malte Rolf T1 - Metaverse opportunities for the public sector T2 - International Conference on Information Systems 2022 : Special Interest Group on Big Data : Proceedings N2 - The metaverse is envisioned as a virtual shared space facilitated by emerging technologies such as virtual reality (VR), augmented reality (AR), the Internet of Things (IoT), 5G, artificial intelligence (AI), big data, spatial computing, and digital twins (Allam et al., 2022; Dwivedi et al., 2022; Ravenscraft, 2022; Wiles, 2022). While still a nascent concept, the metaverse has the potential to “transform the physical world, as well as transport or extend physical activities to a virtual world” (Wiles, 2022). Big data technologies will also be essential in managing the enormous amounts of data created in the metaverse (Sun et al., 2022). Metaverse technologies can offer the public sector a host of benefits, such as simplified information exchange, stronger communication with citizens, better access to public services, or benefiting from a new virtual economy. Implementations are underway in several cities around the world (Geraghty et al., 2022). In this paper, we analyze metaverse opportunities for the public sector and explore their application in the context of Germany’s Federal Employment Agency. Based on an analysis of academic literature and practical examples, we create a capability map for potential metaverse business capabilities for different areas of the public sector (broadly defined). These include education (virtual training and simulation, digital campuses that offer not just online instruction but a holistic university campus experience, etc.), tourism (virtual travel to remote locations and museums, virtual festival participation, etc.), health (employee training – as for emergency situations, virtual simulations for patient treatment – for example, for depression or anxiety, etc.), military (virtual training to experience operational scenarios without being exposed to a real-world threats, practice strategic decision-making, or gain technical knowledge for operating and repairing equipment, etc.), administrative services (document processing, virtual consultations for citizens, etc.), judiciary (AI decision-making aids, virtual proceedings, etc.), public safety (virtual training for procedural issues, special operations, or unusual situations, etc.), emergency management (training for natural disasters, etc.), and city planning (visualization of future development projects and interactive feedback, traffic management, attraction gamification, etc.), among others. We further identify several metaverse application areas for Germany's Federal Employment Agency. These applications can help it realize the goals of the German government for digital transformation that enables faster, more effective, and innovative government services. They include training of employees, training of customers, and career coaching for customers. These applications can be implemented using interactive learning games with AI agents, virtual representations of the organizational spaces, and avatars interacting with each other in these spaces. Metaverse applications will both use big data (to design the virtual environments) and generate big data (from virtual interactions). Issues related to data availability, quality, storage, processing (and related computing power requirements), interoperability, sharing, privacy and security will need to be addressed in these emerging metaverse applications (Sun et al., 2022). Special attention is needed to understand the potential for power inequities (wealth inequity, algorithmic bias, digital exclusion) due to technologies such as VR (Egliston & Carter, 2021), harmful surveillance practices (Bibri & Allam, 2022), and undesirable user behavior or negative psychological impacts (Dwivedi et al., 2022). The results of this exploratory study can inform public sector organizations of emerging metaverse opportunities and enable them to develop plans for action as more of the metaverse technologies become a reality. While the metaverse body of research is still small and research agendas are only now starting to emerge (Dwivedi et al., 2022), this study offers a building block for future development and analysis of metaverse applications. Y1 - 2022 UR - https://aisel.aisnet.org/sigbd2022/5/ PB - AIS CY - Atlanta ER -