TY - THES A1 - Schimpf, Stefan T1 - Herkunft und Ablagerungsmilieu quartärer Sedimente im Einzugsgebiet des Heihe, NW China N2 - Der zentralasiatische Naturraum, wie er sich uns heute präsentiert, ist das Ergebnis eines Zusammenwirkens vieler verschiedener Faktoren über Jahrmillionen hinweg. Im aktuellen Kontext des Klimawandels zeigt sich jedoch, wie stark sich Stoffflüsse auch kurzfristig ändern und dabei das Gesicht der Landschaft verwandeln können. Die Gobi-Wüste in der Inneren Mongolei (China), als Teil der gleichnamigen Trockenregionen Nordwestchinas, ist aufgrund der Ausgestaltung ihrer landschaftsprägenden Elemente sowie ihrer Landschaftsdynamik, im Zusammenhang mit der Lage zum Tibet-Plateau, in den Fokus der klimageschichtlichen Grundlagenforschung gerückt. Als großes Langzeitarchiv unterschiedlichster fluvialer, lakustriner und äolischer Sedimente stellt sie eine bedeutende Lokalität zur Rekonstruktion von lokalen und regionalen Stoffflüssen dar.. Andererseits ist die Gobi-Wüste zugleich auch eine bedeutende Quelle für den überregionalen Staubtransport, da sie aufgrund der klimatischen Bedingungen insbesondere der Erosion durch Ausblasung preisgegeben wird. Vor diesem Hintergrund erfolgten zwischen 2011 und 2014, im Rahmen des BMBF-Verbundprogramms WTZ Zentralasien – Monsundynamik & Geoökosysteme (Förderkennzeichen 03G0814), mehrere deutsch-chinesische Expeditionen in das Ejina-Becken (Innere Mongolei) und das Qilian Shan-Vorland. Im Zuge dieser Expeditionen wurden für eine Bestimmung potenzieller Sedimentquellen erstmals zahlreiche Oberflächenproben aus dem gesamten Einzugsgebiet des Heihe (schwarzer Fluss) gesammelt. Zudem wurden mit zwei Bohrungen im inneren des Ejina-Beckens, ergänzende Sedimentbohrkerne zum bestehenden Bohrkern D100 (siehe Wünnemann (2005)) abgeteuft, um weit reichende, ergänzende Informationen zur Landschaftsgeschichte und zum überregionalen Sedimenttransfer zu erhalten. Gegenstand und Ziel der vorliegenden Doktorarbeit ist die sedimentologisch-mineralogische Charakterisierung des Untersuchungsgebietes in Bezug auf potenzielle Sedimentquellen und Stoffflüsse des Ejina-Beckens sowie die Rekonstruktion der Ablagerungsgeschichte eines dort erbohrten, 19m langen Sedimentbohrkerns (GN100). Schwerpunkt ist hierbei die Klärung der Sedimentherkunft innerhalb des Bohrkerns sowie die Ausweisung von Herkunftssignalen und möglichen Sedimentquellen bzw. Sedimenttransportpfaden. Die methodische Herangehensweise basiert auf einem Multi-Proxy-Ansatz zur Charakterisierung der klastischen Sedimentfazies anhand von Geländebeobachtungen, lithologisch-granulometrischen und mineralogisch-geochemischen Analysen sowie statistischen Verfahren. Für die mineralogischen Untersuchungen der Sedimente wurde eine neue, rasterelektronenmikroskopische Methode zur automatisierten Partikelanalyse genutzt und den traditionellen Methoden gegenübergestellt. Die synoptische Betrachtung der granulometrischen, geochemischen und mineralogischen Befunde der Oberflächensedimente ergibt für das Untersuchungsgebiet ein logisches Kaskadenmodell mit immer wiederkehrenden Prozessbereichen und ähnlichen Prozesssignalen. Die umfangreichen granulometrischen Analysen deuten dabei auf abnehmende Korngrößen mit zunehmender Entfernung vom Qilian Shan hin und ermöglichen die Identifizierung von vier texturellen Signalen: den fluvialen Sanden, den Dünensanden, den Stillwassersedimenten und Stäuben. Diese Ergebnisse können als Interpretationsgrundlage für die Korngrößenanalysen des Bohrkerns genutzt werden. Somit ist es möglich, die Ablagerungsgeschichte der Bohrkernsedimente zu rekonstruieren und in Verbindung mit eigenen und literaturbasierten Datierungen in einen Gesamtkontext einzuhängen. Für das Untersuchungsgebiet werden somit vier Ablagerungsphasen ausgewiesen, die bis in die Zeit des letzten glazialen Maximums (LGM) zurückreichen. Während dieser Ablagerungsphasen kam es im Zuge unterschiedlicher Aktivitäts- und Stabilitätsphasen zu einer kontinuierlichen Progradation und Überprägung des Schwemmfächers. Eine besonders aktive Phase kann zwischen 8 ka und 4 ka BP festgestellt werden, während der es aufgrund zunehmender fluvialer Aktivitäten zu einer deutlich verstärkten Schwemmfächerdynamik gekommen zu sein scheint. In den Abschnitten davor und danach waren es vor allem äolische Prozesse, die zu einer Überprägung des Schwemmfächers geführt haben. Hinsichtlich der mineralogischen Herkunftssignale gibt es eine große Variabilität. Dies spiegelt die enorme Heterogenität der Geologie des Untersuchungsgebietes wider, wodurch die räumlichen Signale nicht sehr stark ausgeprägt sind. Dennoch, können für das Einzugsgebiet drei größere Bereiche deklariert werden, die als Herkunftsgebiet in Frage kommen. Das östliche Qilian Shan Vorland zeichnet sich dabei durch deutlich höhere Chloritgehalte als primäre Quelle für die Sedimente im Ejina-Becken aus. Sie unterscheiden sich insbesondere durch stark divergierende Chloritgehalte in der Tonmineral- und Gesamtmineralfraktion, was das östliche Qilian Shan Vorland als primäre Quelle für die Sedimente im Ejina-Becken auszeichnet. Dies steht in Zusammenhang mit den Grünschiefern, Ophioliten und Serpentiniten in diesem Bereich. Geochemisch deutet vor allem das Cr/Rb-Verhältnis eine große Variabilität innerhalb des Einzugsgebietes an. Auch hier ist es das östliche Vorland, welches aufgrund seines hohen Anteils an mafischen Gesteinen reich an Chromiten und Spinellen ist und sich somit vom restlichen Untersuchungsgebiet abhebt. Die zeitliche aber auch die generelle Variabilität der Sedimentherkunft lässt sich in den Bohrkernsedimenten nicht so deutlich nachzeichnen. Die mineralogisch-sedimentologischen Eigenschaften der erbohrten klastischen Sedimente zeugen zwar von zwischenzeitlichen Änderungen bei der Sedimentherkunft, diese sind jedoch nicht so deutlich ausgeprägt, wie es die Quellsignale in den Oberflächensedimenten vermuten lassen. Ein Grund dafür scheint die starke Vermischung unterschiedlichster Sedimente während des Transportes zu sein. Die Kombination der Korngrößenergebnisse mit den Befunden der Gesamt- und Schwermineralogie deuten darauf hin, dass es zwischenzeitlich eine Phase mit überwiegend äolischen Prozessen gegeben hat, die mit einem Sedimenteintrag aus dem westlichen Bei Shan in Verbindung stehen. Neben der Zunahme ultrastabiler Schwerminerale wie Zirkon und Granat und der Abnahme opaker Schwerminerale, weisen vor allem die heutigen Verhältnisse darauf hin. Der Vergleich der traditionellen Schwermineralanalyse mit der Computer-Controlled-Scanning-Electron-Microscopy (kurz: CCSEM), die eine automatisierte Partikelauswertung der Proben ermöglicht, zeigt den deutlichen Vorteil der modernen Analysemethode. Neben einem zeitlichen Vorteil, den man durch die automatisierte Abarbeitung der vorbereiteten Proben erlangen kann, steht vor allem die deutlich größere statistische Signifikanz des Ergebnisses im Vordergrund. Zudem können mit dieser Methode auch chemische Varietäten einiger Schwerminerale bestimmt werden, die eine noch feinere Klassifizierung und sicherere Aussagen zu einer möglichen Sedimentherkunft ermöglichen. Damit ergeben sich außerdem verbesserte Aussagen zu Zusammensetzungen und Entstehungsprozessen der abgelagerten Sedimente. Die Studie verdeutlicht, dass die Sedimentherkunft innerhalb des Untersuchungsgebietes sowie die ablaufenden Prozesse zum Teil stark von lokalen Gegebenheiten abhängen. Die Heterogenität der Geologie und die Größe des Einzugsgebietes sowie die daraus resultierende Komplexität der Sedimentgenese, machen exakte Zuordnungen zu klar definierten Sedimentquellen sehr schwer. Dennoch zeigen die Ergebnisse, dass die Sedimentzufuhr in das Ejina-Becken in erster Linie durch fluviale klastische Sedimente des Heihe aus dem Qilian Shan erfolgt sein muss. Die Untersuchungsergebnisse zeigen jedoch ebenso die Notwendigkeit einer ergänzenden Bearbeitung angrenzender Untersuchungsgebiete, wie beispielsweise den Gobi-Altai im Norden oder den Beishan im Westen, sowie die Verdichtung der Oberflächenbeprobung zur feineren Auflösung von lokalen Sedimentquellen. N2 - The Central Asian natural space, as it presents itself today, is the result of a combination of many different factors over millions of years. However, in the current context of climate change it becoming obvious how strongly material fluxes can change in the short-term and thereby transform the face of the landscape. As a large long-term archive of different fluvial, lacustrine and aeolian sediments, the Gobi Desert in Inner Mongolia (China) represents a significant locality for the reconstruction of local and regional material flows as well as an important source for supra-regional dust transport due to erosion by aeolian processes. This, in connection with its location to the Tibetan Plateau, has moved the Gobi Desert into the focus of climate-historical basic research. Against this background, several German-Chinese expeditions to Ejina Basin (Inner Mongolia) and the Qilian Shan foreland were accomplished between 2011 and 2014. They were part of the BMBF joint program WTZ Central Asia - Monsoon Dynamics & Geo-Ecosystems (Grant No. 03G0814). In the course of these expeditions numerous surface samples from the entire catchment area of the Heihe (Black River) were collected for the determination of potential sediment sources. Additionally, two drillings in the interior of the Ejina Basin were conducted as a continuation of the existing drill-core D100 (see Wünnemann (2005)) and for gathering complementary information on landscape history and supra-regional sediment transfer. The goals of this doctoral thesis are a sedimentological-mineralogical characterization of the study area with regard to potential sediment sources and material fluxes of the Ejina Basin as well as the reconstruction of the sedimentation history of a 19 m sediment drill-core (GN100) drilled in the northern part of the basin. The main focus is on the clarification of the sediment provenance within the drill core as well as the designation of provenance signals and possible sediment sources or sediment transport paths. The methodological approach is based on a multi-proxy approach to characterize the clastic sedimentary facies using field observations, lithological-granulometric and mineralogical-geochemical analyses as well as statistical methods. For the mineralogical investigations of the sediments, a new scanning electron microscopic method for automated particle analysis was used and compared with traditional methods. The synoptic analysis of the granulometric, geochemical and mineralogical findings of the surface sediments result in a logical cascade model with recurring process areas and similar process signals. The results of the extensive granulometric analyses indicate decreasing grain sizes as the distance from the Qilian Shan increases and allow the identification of four textural signals: fluvial sands, dune sands, still water sediments and dusts. They can be used as the basis of interpretation for the grain size analyses of the drill core. This makes it possible to reconstruct the depositional history of the core sediments and to put them in an overall context in conjunction with own and literature-based datings. For the study area four depositional phases can be identified which date back until the time of the Last Glacial Maximum (LGM). During these depositional phases, various phases of activity and stability led to a continuous progradation and overprinting of the alluvial fan. A particularly active phase can be observed between 8 ka and 4 ka BP. During this period there seems to have been a significant increase in alluvial fan dynamics due to increasing fluvial activity. In the periods before and after mainly aeolian processes have led to an overprinting of the alluvial fan. Regarding the mineralogical provenance signals there is a great variability. This reflects the enormous geological heterogeneity of the study area, by which the spatial signals are not very pronounced. Nonetheless, within the catchment three larger areas can be declared which can be considered as possible sediment sources. These are the eastern and western foreland of the Qilian Shan mountains as wells as the Bei Shan in the west of the Ejina basin. They differ, in particular, from strongly diverging chlorite contents in the clay mineral and total mineral fraction. The eastern Qilian Shan foreland is characterized by significantly higher chlorite contents as the primary source for the sediments in the Ejina Basin. This is related to the greenschists, ophiolites and serpentinites in this area. Geochemically, the Cr/Rb-ratio in particular indicates a large variability within the catchment area. In this case its again the eastern Qilian Shan foreland which stands out from the rest of the study area with high values due to its high proportion of mafic rocks which are rich in chromites and spinels. Within the drill core sediments of GN100 the temporal but also the general variability of the sediment provenance according to the surface sediment results cannot be clearly traced. The mineralogical-sedimentological characteristics of the drilled clastic sediments exhibit meantime changes in sediment provenance. However, they are not as pronounced as the source signals within the surface sediments suggest. One reason seems to be the strong mixing of different sediments during transport. The combination of the particle size results with the results of the total and heavy mineralogy indicate that there must have been a phase in the meantime with predominantly aeolian processes.. These processes were connected with a sediment input from the Bei Shan mountains in the west. In addition to the increase in ultrastable heavy minerals such as zirconium and garnet and the decline of opaque heavy minerals, mainly present conditions point to this. The comparison of the traditional heavy mineral analysis (polarized light microscopy) with computer-controlled scanning electron microscopy (short: CCSEM) shows the clear advantage of the modern analysis method. Above all is the significant greater statistical significance of the counting results. In addition, this method can also be used to determine chemical varieties of some heavy minerals, which allows an even finer classification and more reliable conclusions about a possible sediment provenance. Furthermore, better statements can be made about the composition and the development process of the deposited sediments. This thesis shows that the sediment provenance within the study area as well as the ongoing processes partly depend strongly on local conditions. Therefore, the heterogeneity of the geology and the size of the catchment as well as the resulting complexity of the sediment genesis makes it very difficult to make exact assignments to clearly defined sediment sources. Nevertheless, the results indicate a primary input of fluvial clastic sediments of the Heihe coming from the Qilian Shan mountains. However, the findings also indicate the need to complement the study with adjacent study areas such as the Gobi Altai in the north or the Beishan in the west as well as a densification of the surface sampling for a better resolution of possible local sediment sources. KW - Heihe KW - Ejina Becken KW - Gaxun Nur KW - Schwerminerale KW - China KW - CCSEM KW - Herkunftsanalyse KW - Tonminerale KW - Heihe KW - Ejina Basin KW - Gaxun Nur KW - Heavy Minerals KW - China KW - CCSEM KW - Provenance Analysis KW - Clay Minerals Y1 - 2020 ER - TY - THES A1 - Maerz, Sven T1 - Analyzing pore systems through comprehensive digital image analysis (DIA) T1 - Analyse von Porensystemen durch umfassende digitale Bildanalyse (DIA) BT - quantifying pore type geometry, detecting effective porosity and reconstructing pore system evolution BT - Quantifizierung der Geometrie von Porentypen, Erfassung der effektiven Porosität und Rekonstruktion der Porenraumentwicklung N2 - Carbonates tend to have complex pore systems which are often composed of distinct assemblages of genetically and geometrically different pore types at various scales (e.g., Melim et al., 2001; Lee et al., 2009; He et al., 2014; Dernaika & Sinclair, 2017; Zhang et al., 2017). Such carbonate-typical multimodal pore systems are the result of both primary depositional processes and multiple stages of postdepositional modifications, causing small-scale heterogeneities in pore system properties and leading to the co-occurrence of both effective and ineffective pore types. These intrinsic variations in pore type effectiveness are the main reason for the often low correlation between porosity and permeability in carbonate pore systems (e.g., Mazzullo 2004; Ehrenberg & Nadeau, 2005; Hollis et al., 2010; He et al., 2014; Rashid et al., 2015; Dernaika & Sinclair, 2017), as it is also true for the marginal lacustrine carbonates studied in this thesis. However, by extracting interconnected and thus effective pore types, and simultaneously excluding isolated and ineffective pores, the understanding and prediction of permeability for given porosity can be highly enhanced (e.g., Melim et al., 2001; Zhang et al., 2017). In this thesis, a step-by-step workflow based on digital image analysis (DIA) is presented and performed on 32 facies-representative samples of marginal lacustrine carbonates from the Middle Miocene Nördlinger Ries crater lake (Southern Germany), resulting in 77 mean values of pore type effectiveness which are based on 23,508 individual pore geometry data. By using pore shape factor γ (sensu Anselmetti et al., 1998) as a parameter to quantitatively describe pore shape complexity and therefore pore interconnectivity, the potential contribution (Kcontr.) of each pore type to total permeability (Ktotal) is calculated, and the most effective pore types are then identified. As a result, primary interpeloidal pores and secondary vugs are the most effective pore types in the studied marginal lacustrine succession, mainly due to their generally big size and complex shape, leading to an excellent interconnection between both pore types and consequently to the establishment of a highly effective pore network. Both pore types together compose the pore system of the peloidal grainstone facies. Therefore, this lithofacies type has been identified as the sedimentary facies with highest porosity-permeability properties in this marginal lacustrine succession. By applying the DIA-based method to 23 additional samples from the studied outcrop which all show extensive partial to complete cementation of preexisting pores, the impact of cementation on pore geometry and therefore on porosity and permeability is quantified. This results in a cementation reduction value for each relevant parameter which can then be used to enhance precision of predicting porosity and permeability within the studied succession. Furthermore, the concept of using pore shape complexity as a proxy parameter for pore system effectiveness is tested by applying an independent method (i.e., fluid flow simulation) to the dataset. DIA is then used once again to evaluate the outcome of fluid flow simulation. The results confirm the previous findings that interpeloidal pores and vugs together build up the most effective pore system in the Ries lake carbonates. Finally, the extraction of the interconnected (i.e., effective) pore network leads to an improved correlation between porosity and permeability within the studied carbonates. The step-by-step workflow described in this thesis provides a quantitative petrographic method to identify and extract effective porosity from the pore system, which is crucial for understanding how carbonate pore systems generate permeability. This thesis also demonstrates that pore shape complexity is the most important geometrical parameter controlling pore interconnection and consequently the formation of effective porosity. It further emphasizes that pore shape factor γ (sensu Anselmetti et al. 1998) is a very robust and scale-independent proxy parameter to quantify pore type effectiveness. Additionally, DIA proves to be an ideal tool to directly link porosity and permeability to their mutual origin: the rock fabric and associated pore structure. N2 - Der Porenraum eines Karbonatgesteins ist zumeist aus einer spezifischen Vergesellschaftung verschiedenster Porentypen aufgebaut, die eine unterschiedliche Herkunft aufweisen und zusätzlich in ihrer Form und Größe stark variieren können (e.g., Melim et al., 2001; Lee et al., 2009; He et al., 2014; Dernaika & Sinclair, 2017; Zhang et al., 2017). Diese für Karbonate typischen multimodalen Porensysteme entstehen sowohl durch primäre Ablagerungsprozesse, als auch durch mehrmalige Modifikation des Porenraumes nach Ablagerung des Sediments. Dies führt zu einer ungleichen Verteilung der Porenraumeigenschaften auf engstem Raum und das zeitgleiche Auftreten von effektiven und ineffektiven Poren. Diese immanenten Unterschiede in der Effektivität einzelner Porentypen sind der Hauptgrund für die häufig sehr niedrige Korellation zwischen Porosität und Permeabilität in Karbonaten (e.g., Mazzullo 2004; Ehrenberg & Nadeau, 2005; Hollis et al., 2010; He et al., 2014; Rashid et al., 2015; Dernaika & Sinclair, 2017). Durch die Extraktion von miteinander verbundenen und somit effektiven Porentypen jedoch kann das Verständnis und die Vorhersage der Permeabilität für einen gegeben Porositätswert stark verbessert werden (e.g., Melim et al., 2001; Zhang et al., 2017). Dazu wird in dieser Arbeit eine auf der digitalen Bildanalyse (DIA) beruhende Methode vorgestellt, mit der schrittweise die Effektivität von Poren aus den analysierten mittelmiozänen lakustrinen Karbonaten des Nördlinger Ries Kratersees (Süddeutschland) berechnet werden kann. Mithilfe des Porenformfaktors  (sensu Anselmetti et al., 1998), der als Parameter zur Quantifizierung der Interkonnektivität zwischen Poren dient, wird der potentiellen Beitrag an Permeabilität jedes Porentyps zur Gesamtpermeabilität bestimmt. Somit können die effektivsten Porentypen innerhalb der analysierten Karbonate identifiziert werden. Desweiteren wird die digitale Bildanalyse dazu benutzt, zementierte Porenräume zu extrahieren, um den Einfluss der Zementation auf die Porenraumeigenschaften zu quantifizieren. Durch eine unabhängige Methode (Fluid-Flow-Simulation), deren Ergebnisse wiederum mit der digitalen Bildanalyse ausgewertet werden, können die vorherigen Erkentnisse bestätigt werden: Interpeloidale Poren und Lösungsporen sind die beiden effektivsten Porentypen im Porenraum der Riesseekarbonate. Die Extraktion des miteinander verbundenen (d.h. effektiven) Porennetzwerkes führt schließlich zu einer erheblich verbesserten Korrelation zwischen Porosität und Permeabilität in den analysierten Karbonaten. Die in dieser Arbeit beschriebene Methode bietet ein quantitatives petrographisches Werkzeug, mit dessen Hilfe die effektive Porosität eines Porenraumes extrahiert werden kann. Dies führt zu einem besseren Verständnis darüber, wie Porensysteme von Karbonaten Permeabilität erzeugen. Diese Dissertation zeigt auch, dass die Formkomplexität von Poren einer der wichtigsten Parameter ist, der die Interkonnektivität zwischen einzelnen Poren und somit die Entstehung von effektiver Porosität steuert. Außerdem erweist sich die digitale Bildanalyse als ausgezeichnetes Werkzeug um die Porosität und Permeabilität direkt an ihren gemeinsamen Ursprung zu knüpfen: die Gesteinstextur und die damit assoziierte Porenstruktur. KW - digital image analysis KW - digitale Bildanalyse KW - effective porosity KW - effektive Porosität KW - carbonate pore types KW - Porentypen in Karbonate Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-445880 ER - TY - THES A1 - Liebs, Göran T1 - Ground penetration radar wave velocities and their uncertainties T1 - Georadar-Wellengeschwindigkeiten mit Fehlerrechnung BT - global inversion of GPR traveltimes to assess uncertainties in CMP velocity models N2 - We develop three new approaches for ground penetration wave velocity calcultaions. The first is based on linear moveout spectra to find the optimum ground wave velocity including uncertainties from multi-offset data gathers. We used synthetic data to illustrate the principles of the method and to investigate uncertainties in ground wave velocity estimates. To demonstrate the applicability of the approach to real data, we analyzed GPR data sets recorded at field sites in Canada over an annual cycle from Steelman & Endres [2010]. The results obtained by this efficient and largely automated procedure agree well with the manual achieved results of Steelman & Endres [2010], derived by a more laborious largely manual analysis strategy. Then we develop a second methodology to global invert reflection traveltimes with a particle swarm optimization approach more precise then conventional spectral NMO-based velocity analysis (e.g., Greaves et al. [1996]). For global optimization, we use particle swarm optimization (PSO; Kennedy & Eberhart [1995]) in the combination with a fast eikonal solver as forward solver (Sethian [1996]; Fomel [1997a]; Sethian & Popovici [1999]). This methodology allows us to generate reliability CMP derived models of subsurface velocities and water content including uncertainties. We test this method with synthetic data to study the behavior of the PSO algorithm. Afterward, We use this method to analyze our field data from a well constrained test site in Horstwalde, Germany. The achieved velocity models from field data showed good agreement to borehole logging and direct-push data (Schmelzbach et al. [2011]) at the same site position. For the third method we implement a global optimization approach also based on PSO to invert direct-arrival traveltimes of VRP data to obtain high resolution 1D velocity models including quantitative estimates of uncertainty. Our intensive tests with several traveltime data sets helped to understand the behavior of PSO algorithm for inversion. Integration of the velocity model to VRP reflection imaging and attenuation model improved the potential of VRP surveying. Using field data, we examine this novel analysis strategy for the development of petrophysical models and the linking between GPR borehole and other logging data to surface GPR reflection data. N2 - Unterschiedliche Verfahren zur Ermittlung von Georadar-Wellengeschwindigkeiten wurden entwickelt und erfolgreich angewendet. Für die Verfahren wurden statistische Methoden und Schwarmintelligenz-Algorithmen benutzt. Es wurde gezeigt, dass die neuen Verfahren schneller, präziser und besser reproduzierbare Ergebnisse für Georadar-Wellengeschwindigkeit erzielen als herkömmliche Verfahren. Mit verbesserten Werten der Georadar-Wellengeschwindigkeit lassen sich die verzerrten dreidimensionalen Abbilder der obersten zehn Meter des Untergrundes, welche sich mit Georadar-Daten erzeugen lassen, korrigieren. In diesen korrigierten Abbildern sind dann realistische Tiefen von Schichten oder Objekten im Untergrund besser messbar. Außerdem verbessern präzisere Wellengeschwindigkeiten die Bestimmung von Bodenparametern, wie Wassergehalt oder Tonanteil. Die präsentierten Verfahren erlauben eine quantitative Angabe von Fehlern der bestimmten Wellengeschwindigkeit und der daraus folgenden Tiefen und Bodenparametern im Untergrund. Die Vorteile dieser neu entwickelten Verfahren zur Charakterisierung des Untergrundes der oberen Meter wurde an Feldbeispielen demonstriert. KW - ground-penetration radar KW - wave velocities KW - global inversion KW - particle swarm optimisation KW - soil water content KW - subsurface KW - geophyics KW - Georadar KW - Wellengeschwindigkeit KW - globale Inversion KW - Partikel Swarm Optimierung KW - Bodenwassergehalt KW - Untergrund KW - Geophysik Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-436807 ER - TY - THES A1 - Caesar, Levke T1 - The evolution of the Atlantic Meridional Overturning Circulation and its implications for surface warming N2 - The Atlantic Meridional Overturning Circulation (AMOC) is likely the most well-known system of ocean currents on Earth, redistributing heat, nutrients and carbon over a large part of the Earth’s surface and affecting global climate as a result. Due to enhanced freshwater fluxes into the subpolar North Atlantic as a response to global warming, the AMOC is expected, and may have already started, to weaken and these changes will likely have global impacts. It is therefore of considerable relevance to improve our understanding of past and future AMOC changes. My thesis tries to answer some of the open questions in this field by giving strong evidence that the AMOC has already weakened over the last century, by narrowing future projections of this slowdown and by studying the impacts on global surface warming. While there have been various studies trying to reconstruct the strength of the overturning circulation in the past, often based on model simulations in combination with observations (Jackson et al., 2016, Kanzow et al., 2010) or proxies (Frajka-Williams, 2015, Latif et al., 2006), the results so far, due to lack of direct measurements, have been inconclusive. In the first paper I build on previous work that links the anomalously low sea surface temperatures (SSTs) in the North Atlantic with the reduced meridional heat transport due to a weaker AMOC. Using the output of a high-resolution global climate model, I derive a characteristic spatial and seasonal SST fingerprint of an AMOC slowdown and an improved SST-based AMOC index. The same fingerprint is seen in the observational SSTs since the late 19th Century, giving strong evidence that since then the AMOC has slowed down. In addition, the reconstruction of the historical overturning strength with the new AMOC index agrees well with and extends the results of earlier studies as well as the direct measurements from the RAPID project and shows a strong decline of the AMOC by about 15% (3±1 Sv) since the mid-20th Century (Caesar et al., 2018). The reconstruction of the historical overturning strength with the AMOC index enables us to weight future AMOC projections based on their skill in modeling the historical AMOC as described in the second paper of this thesis (Olson et al., 2018). Using Bayesian model averaging we considerably narrow the projections of the CMIP5 ensemble to a decrease of -4.0 Sv and -6.8 Sv between the years 1960-1999 and 2060-2099 for the RCP4.5 and RCP8.5 emission scenarios, respectively. These values fit to, yet are at the lower end of, previously published estimates. In the third paper I examine how the AMOC slowdown affects the global mean surface temperature (GMST) with a focus on how it will change the ocean heat uptake (OHC). Accounting for the effect of changes in the radiative forcing on the GMST, I test how AMOC variations correlate with the residual part of surface temperature changes in the past. I find that the correlation is positive which fits the understanding that the deep-water formation that is important in driving the AMOC cools the deep ocean and therefore warms the surface (Caesar et al., 2019). The future weakening of the overturning circulation could therefore delay global surface warming. Due to nonlinear behavior and scale specific changes it can be difficult to study the dominant processes and modes that drive climate variability. In the fourth paper we develop and test a new technique based on the wavelet multiscale correlation (WMC) similarity measure to study climate variability on different temporal and spatial scales (Agarwal et al., 2018). In a fifth contribution to my thesis this method is applied to the observed sea surface temperatures. The results reconfirm well-known relations between SST anomalies such as the El Niño-Southern Oscillation (ENSO) and the Pacific Decadal Oscillation (PDO) on inter-annual and decadal timescales, respectively. They furthermore give new insights into the characteristics and origins of long-range teleconnections, for example, that the teleconnection between ENSO and Indian Ocean dipole exist mainly between the northern part of the ENSO tongue and the equatorial Indian Ocean, and provides therefore valuable knowledge about the regions that are necessary to include when modeling regional climate variability at a certain scale (Agarwal et al., 2019). In summary, my PhD thesis investigates past and future AMOC variability and its effects on global mean surface temperature by utilizing a combination of observational sea surface data and the output of historical and future climate model simulations from both the high-resolution CM2.6 model as well as the CMIP5 ensemble. It further includes the development and validation of a new method to study climate variability, that, applied to the observed sea surface temperatures, gives new insight about teleconnections in the Earth System. My findings provide evidence that the AMOC has already slowed down, will continue to do so in the future, and will impact the global mean temperature. Further impacts of an AMOC slowdown may include increased sea-level rise at the U.S. east coast (Ezer, 2015), heat extremes in Europe (Duchez et al., 2016) and increased storm activity in the North Atlantic region (Jackson et al., 2015), all of which have significant socio-economic implications. KW - Climate Change KW - Ocean Circulation KW - AMOC Y1 - 2019 CY - Potsdam ER - TY - THES A1 - Ramage, Justine Lucille T1 - Impact of Hillslope Thermokarst on the Nearshore Carbon Budget Along the Yukon Coast, Canada N2 - In ice-rich permafrost regions, changes in the permafrost thermal regime cause surface disturbances. These changes are amplified by the increase in air temperatures recorded in the Arctic in the past decades. Thermokarst is a process that leads to surface subsidence and formation of characteristic landforms following thawing of ice-rich permafrost or melting of massive ice. Thermokarst is widespread on hillslopes and the number of associated landforms is increasing in the Arctic. Through this process large amounts of material are eroded and transported to the sea or accumulate along hillslopes. While hillslope thermokarst modifies terrestrial and aquatic ecosystems, there is limited understanding of its environmental impact at a regional scale. In this thesis we quantify the environmental impacts of hillslope thermokarst on the valley and nearshore ecosystems along the Yukon Coast, Canada. Using supervised machine learning, we identified geomorphic factors that favour the development of coastal retrogressive thaw slump (RTS), one of the most dynamic hillslope thermokarst landform. Coastal geomorphology and ground ice type and content play a major role in RTS occurrence. Using aerial photographs and satellite imagery, we traced the evolution of RTSs between 1952 and 2011. During this time, the number and areal coverage of RTSs increased by 73%. RTSs eroded and partly released to the nearshore zone organic carbon contained in millions of cubic meters of material. Our results show that 56% of the RTSs identified along the coast in 2011 have eroded 16.6 × 10^6 m3 of material; a large part (45%) was transported alongshore due to coastal processes. Moreover, we show that RTSs are a major contributor to the carbon budget in the nearshore ecosystem: 17% of the coastal RTSs identified in 2011 contributed annually up to 0.6% of the organic carbon released by coastal retreat along the Yukon Coast. To assess the impact of hillslope thermokarst on the terrestrial ecosystem, we measured the spatial distribution of soil organic carbon (SOC) and total nitrogen (TN) along hillslopes in three Arctic valleys. We highlight the high spatial variability in the distribution of SOC and TN in the valleys. This distribution is caused by complex soil processes occurring along the hillslopes. Hillslope thermokarst impacts the degradation of organic matter and affects the storage of SOC and TN. N2 - Veränderungen im thermalen Regime des Permafrosts verursachen Störungen der Erdoberfläche. Diese Veränderungen werden durch die in der Arktis seit Jahrzehnten ansteigenden Temperaturen verstärkt. Thermokarst ist ein Prozess, welcher die Erdoberfläche durch Schmelzen von Grundeis, oder Auftauen von Permafrost absacken lässt, wodurch charakteristische Landformen entstehen. Thermokarst ist vor allem entlang von Hängen weit verbreitet und die Anzahl der damit verbundenen Landformen in der Arktis steigt stetig an. Dieser Prozess mobilisiert große Mengen an Material, welche in Richtung Meer transportiert oder entlang von Hängen akkumuliert werden. Während entlang von Hängen auftretender Thermokarst terrestrische sowie aquatische Ökosysteme stark verändert, ist dessen Einfluss auf regionaler Skala zurzeit noch Gegenstand der Forschung. In dieser Arbeit quantifizieren wir die Auswirkungen von Thermokarstprozessen entlang von Hängen auf die umliegenden Ökosysteme der küstennahen Täler und Nahküstenbereiche entlang der Yukon Küste in Kanada. Mittels überwachtem maschinellen Lernen haben wir geomorphische Faktoren identifiziert, welche die Entwicklung von retrogressiven Auftaurutschungen (RTS) begünstigen. RTS sind eine Erscheinungsform von Thermokarst entlang von Hängen. Die Küstengeomorphologie, sowie der Grundeistyp und -inhalt sind die wesentlichen bestimmenden Faktoren für das Auftreten von RTS. Wir haben Luftbildaufnahmen und Satellitenbilder genutzt, um die Evolution von RTS im Zeitraum von 1952 bis 2011 zu verfolgen. Während dieser Zeit ist die Anzahl und Ausdehnung von RTS linear angestiegen. Wir zeigen, dass 56% der RTS welche entlang der Küste in 2011 identifiziert wurden, 16.6 × 106 m3 an Material erodiert haben. Hiervon wurden 45% durch Küstenprozesse entlang der Küste transportiert. RTS tragen wesentlich zu dem Kohlenstoff-Budget des Nahküstenbereiches bei: 17% der in 2011 identifizierten RTS, haben 0.6% des organischen Kohlenstoffes transportiert, welcher durch Küstenerosion entlang der Yukon Küste jährlich freigesetzt wird. Um den Einfluss von Thermokarst entlang von Hängen auf das terrestrische Ökosystem zu beurteilen, haben wir die räumliche Verteilung von organischem Bodenkohlenstoff und Stickstoff (SOC, TN) entlang von Hangprofilen in drei arktischen Tälern analysiert.Wir weisen auf eine hohe räumliche Variabilität in der Verteilung von SOC und TN hin, welche auf komplexe Bodenprozesse zurückzuführen ist, welche entlang von Hängen auftreten. Thermokarst entlang von Hängen hat einen großen Einfluss auf die Degradierung von organischem Material und die Speicherung von SOC und TN. N2 - Le changement climatique est la cause de la dégradation rapide du pergélisol à travers les régions arctiques et subarctiques. Cette dégradation s’exprime par des changements dans la taille, l’abondance et la structure des glissements rétrogressifs dus au dégel (GRD) et autres processus de pente thermokarstiques. Ces processus d’érosion des pentes contribuent au transport de sédiments vers l’Océan Arctique. Bien que l’impact des processus thermokarstiques sur les écosystèmes terrestres et aquatiques soit reconnu, il n’y a toujours pas d’étude qui quantifie leurs impacts sur les écosystèmes côtiers de l’Arctique. Dans cette thèse, nous quantifions les impacts des thermokarstes de pente dans les vallées et le long de la côte du Yukon, Canada. Nous avons utilisé des méthodes statistiques telles que les arbres de classification et les régressions logistiques pour identifier les facteurs qui favorisent le développement des GRD, un des modelés de dégradation du pergélisol le plus actif. La géomorphologie côtière ainsi que la nature et la quantité de glace dans le sol jouent un rôle prépondérant dans le développement des GRD. En utilisant des images satellite et des photos aériennes, nous avons suivi l’évolution des glissements rétrogressifs dus au dégel entre 1952 et 2011. Sur cette période, le nombre et l’étendue des GRD ont augmenté de 73% le long de la côte du Yukon. Les GRD ont érodé et partiellement relâché dans l’océan du carbon organic contenu dans des millions de mètres cubes de sédiments. Nos résultats montrent que 56% des GRD identifiés le long de la côte en 2011 ont érodé 16.6 × 106 m3 de sédiments; 45% a été transporté dans l’océan. De plus, notre étude montre que les GRD ont un rôle majeur sur le budget du carbone dans les milieux côtiers : 17% des GRD identifiés en 2011 ont relâché 0.6% du carbone érodé annuellement du fait de l’érosion côtière. Nous avons aussi étudié la dégradation du pergélisol le long des pentes des vallées périglaciaires, dans l’objectif de comprendre leurs impacts sur les sols et sur les stocks de carbone et d’azote. Nos résultats montrent qu’il y a une grande variabilité dans la distribution du carbone et de l’azote dans les vallées. Ces disparités sont causées par de complexes processus thermiques au niveau des sols. Les processus de pente thermokarstiques ont un impact important sur la dégradation de la matière organique dans les sols et affectent le stockage du carbone et de l’azote dans les régions Arctiques de pergélisol. KW - permafrost KW - thermokarst KW - soil organic carbon KW - retrogressive thaw slump KW - thermoerosion KW - carbon budget KW - Permafrost KW - thermokarst KW - Bodenkohlenstoff KW - retrogressiven Auftaurutschungen KW - thermoerosion KW - Kohlenstoff-Budget Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-421867 ER - TY - THES A1 - Besendörfer, Christian René T1 - Innovationen im nachhaltigen Landmanagement BT - Sichtweisen, Prozesse und Unterstützungsmöglichkeiten Y1 - 2018 ER - TY - THES A1 - Wolf, Julia T1 - Schadenserkennung in Beton durch Überwachung mit eingebetteten Ultraschallprüfköpfen T1 - Monitoring with embedded ultrasound sensors to detect damage in concrete N2 - Die zerstörungsfreien Prüfungen von Bauwerken mit Hilfe von Ultraschallmessverfahren haben in den letzten Jahren an Bedeutung gewonnen. Durch Ultraschallmessungen können die Geometrien von Bauteilen bestimmt sowie von außen nicht sichtbare Fehler wie Delaminationen und Kiesnester erkannt werden. Mit neuartigen, in das Betonbauteil eingebetteten Ultraschallprüfköpfen sollen nun Bauwerke dauerhaft auf Veränderungen überprüft werden. Dazu werden Ultraschallsignale direkt im Inneren eines Bauteils erzeugt, was die Möglichkeiten der herkömmlichen Methoden der Bauwerksüberwachung wesentlich erweitert. Ein Ultraschallverfahren könnte mit eingebetteten Prüfköpfen ein Betonbauteil kontinuierlich integral überwachen und damit auch stetig fortschreitende Gefügeänderungen, wie beispielsweise Mikrorisse, registrieren. Sicherheitsrelevante Bauteile, die nach dem Einbau für Messungen unzugänglich oder mittels Ultraschall, beispielsweise durch zusätzliche Beschichtungen der Oberfläche, nicht prüfbar sind, lassen sich mit eingebetteten Prüfköpfen überwachen. An bereits vorhandenen Bauwerken können die Ultraschallprüfköpfe mithilfe von Bohrlöchern und speziellem Verpressmörtel auch nachträglich in das Bauteil integriert werden. Für Fertigbauteile bieten sich eingebettete Prüfköpfe zur Herstellungskontrolle sowie zur Überwachung der Baudurchführung als Werkzeug der Qualitätssicherung an. Auch die schnelle Schadensanalyse eines Bauwerks nach Naturkatastrophen, wie beispielsweise einem Erdbeben oder einer Flut, ist denkbar. Durch die gute Ankopplung ermöglichen diese neuartigen Prüfköpfe den Einsatz von empfindlichen Auswertungsmethoden, wie die Kreuzkorrelation, die Coda-Wellen-Interferometrie oder die Amplitudenauswertung, für die Signalanalyse. Bei regelmäßigen Messungen können somit sich anbahnende Schäden eines Bauwerks frühzeitig erkannt werden. Da die Schädigung eines Bauwerks keine direkt messbare Größe darstellt, erfordert eine eindeutige Schadenserkennung in der Regel die Messung mehrerer physikalischer Größen die geeignet verknüpft werden. Physikalische Größen können sein: Ultraschalllaufzeit, Amplitude des Ultraschallsignals und Umgebungstemperatur. Dazu müssen Korrelationen zwischen dem Zustand des Bauwerks, den Umgebungsbedingungen und den Parametern des gemessenen Ultraschallsignals untersucht werden. In dieser Arbeit werden die neuartigen Prüfköpfe vorgestellt. Es wird beschrieben, dass sie sich, sowohl in bereits errichtete Betonbauwerke als auch in der Konstruktion befindliche, einbauen lassen. Experimentell wird gezeigt, dass die Prüfköpfe in mehreren Ebenen eingebettet sein können da ihre Abstrahlcharakteristik im Beton nahezu ungerichtet ist. Die Mittenfrequenz von rund 62 kHz ermöglicht Abstände, je nach Betonart und SRV, von mindestens 3 m zwischen Prüfköpfen die als Sender und Empfänger arbeiten. Die Empfindlichkeit der eingebetteten Prüfköpfe gegenüber Veränderungen im Beton wird an Hand von zwei Laborexperimenten gezeigt, einem Drei-Punkt-Biegeversuch und einem Versuch zur Erzeugung von Frost-Tau-Wechsel Schäden. Die Ergebnisse werden mit anderen zerstörungsfreien Prüfverfahren verglichen. Es zeigt sich, dass die Prüfköpfe durch die Anwendung empfindlicher Auswertemethoden, auftretende Risse im Beton detektieren, bevor diese eine Gefahr für das Bauwerk darstellen. Abschließend werden Beispiele von Installation der neuartigen Ultraschallprüfköpfe in realen Bauteilen, zwei Brücken und einem Fundament, gezeigt und basierend auf dort gewonnenen ersten Erfahrungen ein Konzept für die Umsetzung einer Langzeitüberwachung aufgestellt. N2 - The non-destructive testing of concrete structures with the ultrasound method has become increasingly important in recent years. With the ultrasound technique the geometry of concrete elements can be determined and defects can be detected which are not visible on the surface, such as delaminations and honeycombs. New ultrasound sensors were developed to monitor changes in concrete structures continuously and permanently. Those ultrasound sensors will be embedded into the concrete to transmit and receive ultrasound waves within the structure. This allows a new interpretation of the condition of a structure. The use of the embedded sensors expands the options of the traditional monitoring methods. The ultrasonic technique could monitor a voluminous part of a concrete structure continuously and integral with just a few strategically placed embedded ultrasound sensors and thus register small changes in the concretes texture. Vital parts of concrete structures which are inaccessible for the ultrasonic method after construction can be monitored with embedded sensors. Inaccessibility could be caused by a surface layered with a medium reflecting or absorbing the ultrasonic wave or by to much steel obstruct"-ing the waves path. The sensors can be embedded into existing structures using boreholes and grouting mortar or installed during construction and can thus serve as a tool for quality control. The quick damage evaluation of a construction after a natural disaster such as an earthquake or a flood, is conceivable as well. As the contact between the embedded sensors and the surrounding concrete is assumed as constant over a long time, highly sensitive signal evaluation tools, such as the cross correlation between signals, the Coda Wave Interferometry and the amplitude evaluation, can be used. Therefore, with regular measurements, damage in a construction can be detected at an early stage. But, the damage of a structure can not be measured directly. A distinct damage detection needs a quantity of measured parameters, such as time of flight and amplitude of the ultrasonic wave as well as temperature, which need to be linked to each other. To achieve this, correlations between the state of the concrete construction and those parameters of the measured ultrasonic signal must be investigated. In this work the newly developed ultrasound sensors are introduced. Their installation into a concrete structure is described. The sensors sensitivity to small changes in the concrete is investigated and compared to other Non Destructive Testing (NDT) methods. The highly sensitive signal evaluation tools proof to be particularly advantageous when using embedded sensors. Installations of embedded ultrasound sensors for long time monitoring of real constructions are presented. Based on the gained experience with those installations a concept is presented for the set up of a long time monitoring system. KW - Ultraschall KW - Beton KW - Überwachung KW - Prüfköpfe KW - Temperatur KW - Frost-Tau-Wechsel KW - Schaden KW - Riss KW - ultrasound KW - concrete KW - monitoring KW - sensors KW - temperature KW - Freeze-Thaw-Cycles KW - damage KW - crack Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-397363 ER - TY - THES A1 - Münzel, Sandra T1 - Aspekte der Evolution von aufgespühltem Abraummaterial des Platinerzbergbaus Y1 - 2013 CY - Potsdam ER - TY - THES A1 - Wittig, Karen T1 - Untersuchungen zum Time - Term - Verfahren und seiner Anwendung in der Pn-Tomographie am Beispiel seismischer Feldmessungen in Südafrika Y1 - 2012 CY - Potsdam ER - TY - THES A1 - Arnold, Gabriele T1 - Spektrale Fernerkundung der terristrischen Planetoberflächen von Merkur, Venus und Mars vom visuellen bis in den infraroten Wellenlängenbereich Y1 - 2013 CY - Potsdam ER - TY - THES A1 - Meyer, Sven Walter Heinrich T1 - Entwicklung und Erprobung von methodischen Grundlagen zur Konzipierung eines Entscheidungshilfesystems für die Begründung von Extremstandorten Y1 - 2011 CY - Potsdam ER - TY - THES A1 - Anderssohn, Jan T1 - Applikationen der SAR-Interferometrie zur Untersuchung von Oberflächendeformationen : Grundlage hydrologischer, geologischer, vulkanologischer und seismischer Studien Y1 - 2009 CY - Potsdam ER - TY - THES A1 - Zolitschka, Bernd T1 - Paläoklimatische Bedeutung laminierter Sedimente Y1 - 1996 ER - TY - THES A1 - Rein, Bert T1 - Die Warvenchronologie des Holzmaares : vergleichende Untersuchungen an drei Sedimentprofilen Y1 - 1996 ER - TY - THES A1 - Schönfelder, Ilka T1 - Eine Phosphor-Diatomeen-Relation für alkalische Seen und Flüsse Brandenburgs und ihre Anwendung für die paläolimnologische Analyse von Auensedimenten der unteren Havel Y1 - 1996 ER - TY - THES A1 - Riedel, Michael T1 - Nichtlineare Strukturbildung in der Geophysik infolge von Hochdruck-Phasenübergängen Y1 - 1996 ER - TY - THES A1 - Heim, Christoph T1 - Holozäne Sedimente aus dem Toten Meer als Paläoklima-Indikatoren Y1 - 1996 ER - TY - THES A1 - Thywissen, Katharina T1 - Schadensanalyse des Northridge Erdbebens vom 17. Januar 1994, Kalifornien, unter Anwendung eines Geoinformationssystems Y1 - 1997 CY - Potsdam ER - TY - THES A1 - Franz, Leander T1 - Exhuminierung und Hebung von Erdmantel- und Erdkrustensegmenten : Physikochemische Prozesse im Gesteinskörper und ihre geologische Relevanz Y1 - 1997 CY - Potsdam ER - TY - THES A1 - Endres, Christoph T1 - Warvenchronologie und Radiokarbondatierungen an holozänen und spätglazialen Sedimenten des Meerfelder Maares, Eifel Y1 - 1997 CY - Potsdam ER - TY - THES A1 - Müller, Andreas T1 - Magnetotellurik zur Identifizierung von tektonisch verursachten Änderungen des elektrischen Wiederstandes : Modellierungen und neue Methoden der Auswertung : ein Beitrag zum Deutsch-Türkischen Erdbeben Forschungsprojekt Y1 - 1997 ER - TY - THES A1 - Plessen, Hans-Gerrit T1 - Analytik und Geochemie der Platingruppenelemente in magmatischen Gesteinen Y1 - 1997 ER - TY - THES A1 - Lücke, Andreas T1 - Die Sauerstoffisotope der biogenen Silikate des Holzmaares als mögliches Klimaarchiv : eine limnologisch- hydrochemische, sedimentologische und isotopengeochemische Prozeßstudie Y1 - 1997 ER - TY - THES A1 - Kulbe, Thomas T1 - Die spätquartäre Klima- und Umweltgeschichte der Bunger-Oase, Ostantarktis Y1 - 1997 ER - TY - THES A1 - Schelski, Anke T1 - Untersuchungen zur holozänen Vegetationsgeschichte an der unteren Havel Y1 - 1997 CY - Potsdam ER - TY - THES A1 - Ramrath, Antje T1 - Laminierte Sedimente des Lago di Mezzano (Latium, Italien) : Limnogeologie und Rekonstruktion von Umweltbedingungen der letzten 34.000 Jahre Y1 - 1997 ER - TY - THES A1 - Zang, Arno T1 - Akustische Emissionen beim Sprödbruch von Gestein Y1 - 1997 ER - TY - THES A1 - Ziemann, Martin Andreas T1 - Spektroskopische Untersuchungen am Sillimanit des Pegmatoids der Reinbolt Hills (Ostantarktis) : ein Beitrag zur Charakterisierung mineralbildender Fluide und der Sillimanit-Genese KW - Ostantarktis KW - Pegmatoid KW - Sillimanit KW - Gesteinsbildung KW - Fluideinschluss KW - Mikroanalyse KW - Spektroskopie Y1 - 1998 ER - TY - THES A1 - Schwab, Markus Julius T1 - Rekonstruktion der spätquartären Klima- und Umweltgeschichte der Schirmacher Oase und des Wohlthat Massivs (Ostantarktika) Y1 - 1998 ER - TY - THES A1 - Milkereit, Claus T1 - Modellrechnungen zur elastischen Deformation inhomogener anisotroper Gesteine Y1 - 1998 ER - TY - THES A1 - Brüchmann, Cathrin T1 - Diatomeen in frühholozänen Warven des Holzmaares (Eifel) und ihre Bedeutung für paläolimnologische Rekonstruktionen Y1 - 1998 CY - Potsdam ER - TY - THES A1 - Echtler, Helmut Peter T1 - Das südliche Uralgebirge - Tektonik eines intakten paläozoischen Kollisionsorogens Y1 - 1998 ER - TY - THES A1 - Harwart, Stefanie Konstanze T1 - Geochemische Verwitterungstrends eines basaltischen Ausgangsgesteins nach dem spätpleistozänen Gletscherrückzug auf der Taimyrhalbinsel (Zentralsibirien) - Rekonstruktion an einer sedimentären Abfolge des Lama Sees Y1 - 1998 ER - TY - THES A1 - Schröder, Wolfgang T1 - Geochemisch-petrographische Korrelation känozoischer Ignimbrite in den nördlichen Zentralanden, im Dreiländereck N-Chile, W-Bolivien und S-Peru Y1 - 1999 ER - TY - THES A1 - Ryberg, Trond T1 - Die Struktur des oberen Erdmantels und der Übergangszone Y1 - 1999 ER - TY - THES A1 - Hoops, Erich T1 - Die Charakterisierung von Sedimenten der in die Laptev-See mündenden Flüsse anhand von Schwermineralverteilungen Y1 - 1999 ER - TY - THES A1 - Milsch, Harald T1 - Experimentelle Untersuchung des Einflusses von Dekarbonatisierungsreaktionen auf die Transporteigenschaften von Gesteinen Y1 - 1999 CY - Potsdam ER - TY - THES A1 - Althaus, Tilmann T1 - Zur Geochemie der Edelgase ultramafischer Mantelxenolithe und Alkalibasalte der Persani-Berge, Transsilvanien, Rumänien Y1 - 1999 CY - Potsdam ER - TY - THES A1 - Gödde, Hildegard T1 - Die Krustenstrukturen am konvergenten Plattenrand Costa Ricas : refraktionsseismische Messungen und ihre geologisch-geodynamische Interpretation Y1 - 1999 ER - TY - THES A1 - Trusch, Robert T1 - Monographie des Geometriden-Taxon Dyscia (Insecta, Lepidoptera) : systematische Revision, Verbreitung, Bionomie und phylogenetische Analyse der Arten Y1 - 1999 ER - TY - THES A1 - Krüger, Gero T1 - Quantitative Analyse mitteldeutscher Braunkohlenabraumkippen mit reflexionssprektrometrischen Methoden (0,4 - 2,5 æm) T2 - Scientific technical report / Geoforschungszentrum Potsdam Y1 - 1999 VL - 99, 05 PB - GeoForschungsZentrum CY - Potsdam ER - TY - THES A1 - Frank, Ute T1 - Rekonstruktion von Säkularvariationen des Erdmagnetfeldes der letzten 100.000 Jahre - Untersuchungen an Sedimenten aus dem Lago di Mezzano und dem Lago Grande di Monticchio, Italien Y1 - 1999 CY - Potsdam ER - TY - THES A1 - Hinrichsen, Arne T1 - Vergleichend-ökologische Untersuchung über Konversionsgebiete in Brandenburg als Lebensraum solitärer Wespen (Hymenoptera Aculeata) mit besonderer Berücksichtigung der Sukzessionsfolgen Y1 - 1999 CY - Potsdam ER - TY - THES A1 - Strobl, Peter T1 - Entwicklung von Verfahren zur Datenaufbereitung und Kalibrierung eines abbildenden Spetrometers am Beispiel des DAIS 7915 Y1 - 1999 CY - Potsdam ER - TY - THES A1 - Wegler, Ulrich T1 - Deterministische und statistische Untergrundmodelle des Vulkans Merapi (Java, Indonesien) : eine Analyse künstlich erzeugter seismischer Signale Y1 - 1999 CY - Potsdam ER - TY - THES A1 - Melles, Martin T1 - Rekonstruktion der spätquartären Entwicklungsgeschichte polarer Küstenregionen mit Hilfe von Seesedimenten Y1 - 1999 ER - TY - THES A1 - Wulf, Sabine T1 - Das tephrochronologische Referenzprofil des Lago Grande di Monticchio : eine detallierte Stratigraphie des süditalienischen explosiven Vulkanismus der letzten 100.000 Jahre Y1 - 2000 UR - http://www.gfz-potsdam.de/bib/pub/str0103/0103.pdf UR - https://nbn-resolving.org/urn:nbn:de:kobv:b103-010113 ER - TY - THES A1 - Goloubeva, Marina T1 - Anthropogene und natürliche Prozesse in den Seesedimenten der rusischen Arktis, Norilïsk-Gebiet und Taymyr- Halbinsel Y1 - 2000 ER - TY - THES A1 - Bauer, Klaus T1 - Charakterisierung eines vulkanisch geprägten passiven Kontinentalrandes mit seismischen Verfahren am Beispiel Namibias Y1 - 2000 UR - http://www.gfz-potsdam.de/bib/pub/str0102/0102.pdf UR - https://nbn-resolving.org/urn:nbn:de:kobv:b103-010123 ER - TY - THES A1 - Körner, Alexander T1 - Deformationsmodelle nach Auswertung von Tiltmeter- und GPS-Daten für den Vulkan Merapi (Indonesien) Y1 - 2000 ER -