TY - GEN A1 - Zabel, André A1 - Winter, Alette A1 - Kelling, Alexandra A1 - Schilde, Uwe A1 - Strauch, Peter T1 - Tetrabromidocuprates(II)-Synthesis, Structure and EPR N2 - Metal-containing ionic liquids (ILs) are of interest for a variety of technical applications, e.g., particle synthesis and materials with magnetic or thermochromic properties. In this paper we report the synthesis of, and two structures for, some new tetrabromidocuprates(II) with several “onium” cations in comparison to the results of electron paramagnetic resonance (EPR) spectroscopic analyses. The sterically demanding cations were used to separate the paramagnetic Cu(II) ions for EPR measurements. The EPR hyperfine structure in the spectra of these new compounds is not resolved, due to the line broadening resulting from magnetic exchange between the still-incomplete separated paramagnetic Cu(II) centres. For the majority of compounds, the principal g values (g|| and gK) of the tensors could be determined and information on the structural changes in the [CuBr4]2- anions can be obtained. The complexes have high potential, e.g., as ionic liquids, as precursors for the synthesis of copper bromide particles, as catalytically active or paramagnetic ionic liquids. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 226 KW - tetrabromidocuprate(II) KW - X-ray structure KW - electron paramagnetic resonance KW - copper(II) Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-91470 ER - TY - GEN A1 - Zamponi, Flavio A1 - Penfold, Thomas J. A1 - Nachtegaal, Maarten A1 - Lübcke, Andrea A1 - Rittmann, Jochen A1 - Milne, Chris J. A1 - Chergui, Majed A1 - van Bokhoven, Jeroen A. T1 - Probing the dynamics of plasmon-excited hexanethiol-capped gold nanoparticles by picosecond X-ray absorption spectroscopy N2 - Picosecond X-ray absorption spectroscopy (XAS) is used to investigate the electronic and structural dynamics initiated by plasmon excitation of 1.8 nm diameter Au nanoparticles (NPs) functionalised with 1-hexanethiol. We show that 100 ps after photoexcitation the transient XAS spectrum is consistent with an 8% expansion of the Au–Au bond length and a large increase in disorder associated with melting of the NPs. Recovery of the ground state occurs with a time constant of ∼1.8 ns, arising from thermalisation with the environment. Simulations reveal that the transient spectrum exhibits no signature of charge separation at 100 ps and allows us to estimate an upper limit for the quantum yield (QY) of this process to be <0.1. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - paper 176 KW - TiO2 nanoparticles KW - diimine-complexes KW - electron-transfer KW - excitation KW - nanoclusters KW - reactivity KW - supported gold KW - surface KW - visible-light KW - water Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-74492 SP - 23157 EP - 23163 ER - TY - THES A1 - Zarafshani, Zoya T1 - Chain-end functionalization and modification of polymers using modular chemical reactions T1 - Ketten-Ende Funktionalisierung und Modifikation von Polymeren mittels modulare chemischen Reaktionen N2 - Taking advantage of ATRP and using functionalized initiators, different functionalities were introduced in both α and ω chain-ends of synthetic polymers. These functionalized polymers could then go through modular synthetic pathways such as click cycloaddition (copper-catalyzed or copper-free) or amidation to couple synthetic polymers to other synthetic polymers, biomolecules or silica monoliths. Using this general strategy and designing these co/polymers so that they are thermoresponsive, yet bioinert and biocompatible with adjustable cloud point values (as it is the case in the present thesis), the whole generated system becomes "smart" and potentially applicable in different branches. The applications which were considered in the present thesis were in polymer post-functionalization (in situ functionalization of micellar aggregates with low and high molecular weight molecules), hydrophilic/hydrophobic tuning, chromatography and bioconjugation (enzyme thermoprecipitation and recovery, improvement of enzyme activity). Different α-functionalized co/polymers containing cholesterol moiety, aldehyde, t-Boc protected amine, TMS-protected alkyne and NHS-activated ester were designed and synthesized in this work. N2 - In dieser Arbeit wurden mittels der ATRP Methode sowie durch Benutzung funktioneller Initiatoren verschiedene Funktionalitäten an der α- und ω-Position der synthetischen Polymere (Kettenenden) eingeführt. Diese funktionalisierten Polymere können durch modulare synthetische Methoden wie z.B. die “Klick-Zykloaddition” (kupferkatalysiert oder auch kupferfreie Methoden möglich), Amidierung mit anderen synthetischen Polymeren oder Biomolekülen, oder auch mit Silikatmonolithen gekuppelt werden. Den beschriebenen Strategien folgend und unter Benutzung von thermoresponsiven, bioinerten und biokompartiblen (Co-) Polymeren mit einstellbaren Trübungspunkten können mittels Temperaturänderungen leicht steuerbare, „smarte“ Polymersysteme für verschiedene Anwendungen hergestellt werden. Im Rahmen dieser Arbeit wurden speziell Anwendungen wie die Postfunktionalisierung (in situ Funktionalisierung mizellarer Aggregate mit Molekülen, die sowohl niedrige als auch höhere Molekulargewichte aufweisen), hydrophiles/hydrophobes Tuning von Polymeren, Chromatographie an Polymeren sowie Biokonjugation von Polymeren (Enzymthermoprezipitation und -Gewinnung, Enzymaktivitätsmodifizierung) genauer untersucht. Es wurden verschiedene α-funktionalisierte (Co-)Polymere, die Cholesterol, Aldehyde, t-Boc geschützte Amine, TMS-geschützte Alkine und NHS-aktivierte Ester entwickelt und hergestellt und mittels passender ATRP Initiatoren eingeführt. KW - Atom Transfer Radical Polymerization KW - Klick-Chemie KW - Biokonjugation KW - Funktionalisierung KW - Modifizierung von Polymeren KW - ATRP KW - Click chemistry KW - Bioconjugation KW - Functionalization KW - Polymer Modification Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-59723 ER - TY - GEN A1 - Zehbe, Kerstin A1 - Kollosche, Matthias A1 - Lardong, Sebastian A1 - Kelling, Alexandra A1 - Schilde, Uwe A1 - Taubert, Andreas T1 - Ionogels based on poly(methyl methacrylate) and metal-containing ionic liquids BT - correlation between structure and mechanical and electrical properties N2 - Ionogels (IGs) based on poly(methyl methacrylate) (PMMA) and the metal-containing ionic liquids (ILs) bis-1-butyl-3-methlimidazolium tetrachloridocuprate(II), tetrachloride cobaltate(II), and tetrachlorido manganate(II) have been synthesized and their mechanical and electrical properties have been correlated with their microstructure. Unlike many previous examples, the current IGs show a decreasing stability in stress-strain experiments on increasing IL fractions. The conductivities of the current IGs are lower than those observed in similar examples in the literature. Both effects are caused by a two-phase structure with micrometer-sized IL-rich domains homogeneously dispersed an IL-deficient continuous PMMA phase. This study demonstrates that the IL-polymer miscibility and the morphology of the IGs are key parameters to control the (macroscopic) properties of IGs. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 361 KW - microstructure KW - ionogels KW - ionic liquids KW - phase separation KW - mechanical properties KW - ionic conductivity Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-400607 ER - TY - THES A1 - Zenichowski, Karl T1 - Quantum dynamical study of Si(100) surface-mounted, STM-driven switches at the atomic and molecular scale T1 - Quantendynamische Untersuchung von Si(100) Oberflächen-gebundenen, STM-gesteuerten atomaren und molekularen Schaltern N2 - The aim of this thesis is the quantum dynamical study of two examples of scanning tunneling microscope (STM)-controllable, Si(100)(2x1) surface-mounted switches of atomic and molecular scale. The first example considers the switching of single H-atoms between two dangling-bond chemisorption sites on a Si-dimer of the Si(100) surface (Grey et al., 1996). The second system examines the conformational switching of single 1,5-cyclooctadiene molecules chemisorbed on the Si(100) surface (Nacci et al., 2008). The temporal dynamics are provided by the propagation of the density matrix in time via an according set of equations of motion (EQM). The latter are based on the open-system density matrix theory in Lindblad form. First order perturbation theory is used to evaluate those transition rates between vibrational levels of the system part. In order to account for interactions with the surface phonons, two different dissipative models are used, namely the bilinear, harmonic and the Ohmic bath model. IET-induced vibrational transitions in the system are due to the dipole- and the resonance-mechanism. A single surface approach is used to study the influence of dipole scattering and resonance scattering in the below-threshold regime. Further, a second electronic surface was included to study the resonance-induced switching in the above-threshold regime. Static properties of the adsorbate, e.g., potentials and dipole function and potentials, are obtained from quantum chemistry and used within the established quantum dynamical models. N2 - Die vorliegende Doktorarbeit befasst sich mit kleinsten schaltbaren Einheiten in Form des Moleküls Cyclooctadien (COD) und dem Wasserstoff-Atom, die chemisch fest mit einer Oberfläche aus kristallinem Silizium verbunden sind. Jeder dieser Schalter kann mittels einer winzigen Spitze, eines so genannten Rastertunnelmikroskops (RTM), von atomarem Durchmesser in zwei unterscheidbare und stabile Schaltpositionen gebracht werden. Dabei besteht das Schalten entweder in einer Änderung der Geometrie des molekularen Schalters oder im Brechen und Neu-knüpfen chemischer Bindungen. Dabei ist es entscheidend, dass durch die geringe Grösse dieser Schalter eine hohe Anzahl dieser Schalter auf einer Oberfläche deponiert werden können. Mit der in den Schaltern speicherbaren Informationen an oder aus, 0 oder 1 ließen sich sehr hohe Speicherkapazitäten erreichen. Vor einer Anwendung dieser Art ist es wichtig zunächst ein grundlegendes Verständnis der Schaltprozesse auf der Oberfläche zu gewinnen. Wenn alle wesentlichen Faktoren berücksichtigt wurden und der Mechanismus des Schaltens verstanden ist, kann das Ergebnis des Experiments mit Hilfe eines theoretischen Modells vorhergesagt werden. Für die Handhabbarkeit muss sich das theoretisches Modell auf wesentliche Einflüsse beschränken und diese so einfach wie möglich beschreiben. So wurde die simultane Bewegung der 12 Atome des COD in die Bewegung eines gemittelten Massenpunktes entlang von einer oder von zwei räumlichen Freiheitsgraden übersetzt. Dabei kann der Massenpunkt im klassischen Bild anschaulich als eine rollende Kugel beschrieben werden, die in einer Seite einer Doppelmulde gefangen ist. Die Kugel kann durch äußere Anregung zum Schwingen gebracht werden und schließlich über eine Barriere in die benachbarte Mulde schalten. Nun muss die Schwingung der Kugel gebremst werden, um ein Zurück-Schwingen der Kugel zu verhindern. Die Anregung erfolgt durch elektrische Ladungen die von der Spitze des RTM zur Oberfläche wandern oder durch eine schwingende, d.h. warme Oberfläche. Das Bremsen wird über die elastische Bindung zu einer kalten Oberfläche vermittelt. Um Quanteneffekte wie das Tunneln der Kugel durch die Barriere zu beschreiben wurde die Kugel durch ein Wellenpaket beschrieben und dessen Aufenthaltswahrscheinlichkeit in der Doppelmulde untersucht. Im Fall des Wasserstoffatoms war die experimentelle Prüfung des entworfenen Modells für ein Schalten bei starkem Strom leider nicht möglich. Für das COD Molekül konnte jedoch nicht nur die Übereinstimmung mit den experimentellen Befunden, sondern im Fall des Schaltens in Abhängigkeit der Oberflächentemperatur auch die Vorhersagefähigkeit des Modells unter Beweis gestellt werden. KW - Kerndynamik KW - molekulare Schalter KW - Nanotechnologie KW - STM KW - Oberflächen KW - Quantum dynamics KW - molecular switches KW - nanotechnology KW - STM KW - surfaces Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-62156 ER - TY - THES A1 - Zimmermann, Marc T1 - Multifunctional patchy silica particles via microcontact printing T1 - Multifunktionale Patchy Silika Partikel mithilfe des Mikrokontaktdruckverfahrens N2 - This research addressed the question, if it is possible to simplify current microcontact printing systems for the production of anisotropic building blocks or patchy particles, by using common chemicals while still maintaining reproducibility, high precision and tunability of the Janus-balance Chapter 2 introduced the microcontact printing materials as well as their defined electrostatic interactions. In particular polydimethylsiloxane stamps, silica particles and high molecular weight polyethylenimine ink were mainly used in this research. All of these components are commercially available in large quantities and affordable, which gives this approach a huge potential for further up-scaling developments. The benefits of polymeric over molecular inks was described including its flexible influence on the printing pressure. With this alteration of the µCP concept, a new method of solvent assisted particle release mechanism enabled the switch from two-dimensional surface modification to three-dimensional structure printing on colloidal silica particles, without changing printing parameters or starting materials. This effect opened the way to use the internal volume of the achieved patches for incorporation of nano additives, introducing additional physical properties into the patches without alteration of the surface chemistry. The success of this system and its achievable range was further investigated in chapter 3 by giving detailed information about patch geometry parameters including diameter, thickness and yield. For this purpose, silica particles in a size range between 1µm and 5µm were printed with different ink concentrations to change the Janus-balance of these single patched particles. A necessary intermediate step, consisting of air-plasma treatment, for the production of trivalent particles using "sandwich" printing was discovered and comparative studies concerning the patch geometry of single and double patched particles were conducted. Additionally, the usage of structured PDMS stamps during printing was described. These results demonstrate the excellent precision of this approach and opens the pathway for even greater accuracy as further parameters can be finely tuned and investigated, e.g. humidity and temperature during stamp loading. The performance of these synthesized anisotropic colloids was further investigated in chapter 4, starting with behaviour studies in alcoholic and aqueous dispersions. Here, the stability of the applied patches was studied in a broad pH range, discovering a release mechanism by disabling the electrostatic bonding between particle surface and polyelectrolyte ink. Furthermore, the absence of strong attractive forces between divalent particles in water was investigated using XPS measurements. These results lead to the conclusion that the transfer of small PDMS oligomers onto the patch surface is shielding charges, preventing colloidal agglomeration. However, based on this knowledge, further patch modifications for particle self-assembly were introduced including physical approaches using magnetic nano additives, chemical patch functionalization with avidin-biotin or the light responsive cyclodextrin-arylazopyrazoles coupling as well as particle surface modification for the synthesis of highly amphiphilic colloids. The successful coupling, its efficiency, stability and behaviour in different solvents were evaluated to find a suitable coupling system for future assembly experiments. Based on these results the possibility of more sophisticated structures by colloidal self-assembly is given. Certain findings needed further analysis to understand their underlying mechanics, including the relatively broad patch diameter distribution and the decreasing patch thickness for smaller silica particles. Mathematical assumptions for both effects are introduced in chapter 5. First, they demonstrate the connection between the naturally occurring particle size distribution and the broadening of the patch diameter, indicating an even higher precision for this µCP approach. Second, explaining the increase of contact area between particle and ink surface due to higher particle packaging, leading to a decrease in printing pressure for smaller particles. These calculations ultimately lead to the development of a new mechanical microcontact printing approach, using centrifugal forces for high pressure control and excellent parallel alignment of printing substrates. First results with this device and the comparison with previously conducted by-hand experiments conclude this research. It furthermore displays the advantages of such a device for future applications using a mechanical printing approach, especially for accessing even smaller nano particles with great precision and excellent yield. In conclusion, this work demonstrates the successful adjustment of the µCP approach using commercially available and affordable silica particles and polyelectrolytes for high flexibility, reduced costs and higher scale-up value. Furthermore, its was possible to increase the modification potential by introducing three-dimensional patches for additional functionalization volume. While keeping a high colloidal stability, different coupling systems showed the self-assembly capabilities of this toolbox for anisotropic particles. N2 - Diese Forschungsarbeit befasste sich mit der Frage, ob es möglich ist, bekannte Mikrokontaktdruckverfahren, zur Herstellung von anisotropen Bausteinen (Patchy Partikel), weiter zu vereinfachen. Dabei sollten gängige Chemikalien verwendet werden ohne einen Verlust in Reproduzierbarkeit, hoher Präzision und Feineinstellung der Janus-Balance zu erleiden. In Kapitel 2 wurden die verwendeten Mikrokontaktdruckmaterialien sowie deren elektrostatische Wechselwirkungen vorgestellt. Insbesondere handelte es sich dabei um Polydimethylsiloxan Stempel, Silikapartikel und hoch molekulare Polyethylenimin Tinte. All diese Produkte sind kommerziel in großen und bezahlbaren Mengen erhältlich. Nicht nur die Vorteile von polymeren Tinten im Gegensatz zu molekularen Tinten wurde beschrieben, sondern auch die hohe Flexibilität dieses Verfahrens bezüglich der verwendeten Druckkraft. Mit dieser Anpassung des Mikrokontaktdrucks, wurde eine neue Methode der Lösungsmittel unterstützten Partikelablösung ermöglicht, mit deren Hilfe ein einfaches Schalten zwischen zwei dimensionaler Oberflächenfunktionalisierung und drei dimensionalem Strukturdrucks möglich war, ohne Druckparameter oder Startchemikalien zu verändern. Dadurch konnte neu erschaffenes internes Volumen verwendet werden um Nanoadditive einzuführen und so zusätzliche physikalische Eigenschaften zu integrieren, ohne die Oberflächenchemie der Patches verändert wurde. Der Erfolg dieses Systems und seine erreichbaren Grenzen wurde gründlichst in Kapitel 3 erforscht, indem detaillierte Geometrieparameter der Patches einschließlich Durchmesser, Dicke und Ausbeute, erworben wurden. Hierfür wurden Silikapartikel in einem Größenbereich von 1µm bis 5µm mit unterschiedlichen Tintenkonzentrationen bedruckt, um Veränderungen erforschen zu können. Ein notwendiger Luftplasma Ätzschritt für die Produktion von trivalenten Partikeln, mit Hilfe des sogenannten ,,Sandwich‘‘-Drucks, wurde erläutert und vergleichende Untersuchen von einfach und zweifach modifizierten Bausteinen wurden durchgeführt. Zusätzlich dazu, wurde die Verwendung von strukturierten Stempel beschrieben. Die Ergebnisse verdeutlichen die exzellente Genauigkeit dieser Methode und öffnet den Weg um eine hoch höhere Präzision zu erreichen da weitere Parametere genau eingestellt und untersucht werden können, z.B. Luftfeuchtigkeit und Temperature während der Stempelbeladung. Die Performance der herstellten anisotropen Partikel wurde in Kapitel 4 mit Verhaltensstudien in alkoholischen und wässrigen Dispersionen getestet. Dabei wurde die Stabilität der Oberflächenfunktionalisierungen in einem breiten pH Bereich untersucht. Dadurch wurde ein Ablösungsmechanismus bei sehr hohen bzw. niedrigen pH-Werten entdeckt, der zur Deaktivierung elektrostatischer Wechselwirkungen zwischen Partikeloberfläche und Polyelektrolyte Tinte führte. Desweitern wurden die Abwesenheit starker Wechselwirkung der divalenten Partikel in Wasser mit Hilfe von XPS untersucht. Das Resultat zeigte, dass der Transfer kleinster PDMS Oligomere auf die Patchoberfläche zu einer Ladungsabschirmung führte. Dadurch konnte Agglomeration verhindert werden. Aufgrund dieser Ergebnisse wurden weitere Modifikationen für Partikelassemblierung durchgeführt. Hierfür wurde die Einführung von magnetischen Nanoadditiven, die Funktionalisierung mit Avidin-Biotin sowie dem Lichtschaltbaren Cyclodextrin-Arylazopyrazol Komplexen und die Partikeloberflächenfunktionalisierung zur Herstellung amphiphiler Teilchen untersucht. Die Effizienz der Kopplung, deren Stabilität sowie das Verhalten in unterschiedlichen Lösungsmittel wurde beschrieben. Basierend auf diesen Ergebnissen können noch anspruchsvollere Strukturen durch kolloidale Selbstassemblierung erzeugt werden. Einige Ergebnisse dieser Arbeit benötigten zusätzlicher Analyse um die zugrundeliegenden Mechaniken verstehen zu können. Dazu gehörte die relative hohe Streuung des Durchmessers für unterschiedliche Partikelsysteme, sowie das Ausdünnen des Patches mit kleineren Silikapartikeln. Mathematische Modelle in Kapitel 5 beschreiben beide Effekte. Dadurch war es möglich einen Zusammenhang zwischen der natürlichen Partikelgrößenverteilung sowie der Verbreitung des Patchdurchmessers festzustellen. Des Weiteren konnte eine Verkleinerung der Druckkraft durch eine Erhöhung der Packungsdichte für kleine Partikel beschrieben werden, wodurch eine Erklärung der Ausdünnung möglich war. All diese Berechnung führten schlussendlich zur Entwicklung eines neuen mechanischen Mikrokontaktdruckverfahrens, welches mit Hilfe von Zentrifugalkräften eine hohe Druckkontrolle und eine exzellente parallele Ausrichtung zwischen den Substraten ermöglicht. Erste Ergebnisse, sowie deren Vergleich mit bisher erhaltenen Resultaten schließen diese Forschung ab. Des Weiteren zeigt es die Vorteile einer solchen Vorrichtung für kommende Applikationen, besonders um noch kleinere Nanopartikel mit einer hohen Präzision modifizieren zu können. Zusammenfassend ist zu sagen, dass diese Forschung die erfolgreiche Anpassung des Mikrokontaktdruckverfahrens mit kommerziell erhältlichen und bezahlbaren Silikapartikeln und Polyelektrolyten demonstriert, um hohe Flexibilität, reduzierte Kosten und ein erweitertes Skalierungspotential zu bieten. Zusätzlich ist es gelungen, die Funktionalisierungsdichte zu erhöhen, indem drei dimensionaler Strukturdruck bisher ungenutztes Volumen schaffen konnte. Während eine hohe kolloidale Stabilität erhalten blieb, ist es gelungen unterschiedliche Kopplungssysteme zu nutzen, um das Selbstorganisationspotential dieser Toolbox für anisotrope Partikel aufzuzeigen. KW - patchy particles KW - microcontact printing KW - silica particles KW - anisotropic colloids KW - polyelectrolytes KW - Patchy Partikel KW - Mikrokontaktdruck KW - Silika Partikel KW - Anisotrope Kolloide KW - Polyelektrolyte Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-427731 ER - TY - GEN A1 - Zimmermann, Marc A1 - Stomps, Benjamin René Harald A1 - Schulte-Osseili, Christine A1 - Grigoriev, Dmitry A1 - Ewen, Dirk A1 - Morgan, Andrew A1 - Böker, Alexander T1 - Organic dye anchor peptide conjugates as an advanced coloring agent for polypropylene yarn T2 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Polypropylene as one of the world's top commodity polymers is also widely used in the textile industry. However, its non-polar nature and partially crystalline structure significantly complicate the process of industrial coloring of polypropylene. Currently, textiles made of polypropylene or with a significant proportion of polypropylene are dyed under quite harsh conditions, including the use of high pressures and temperatures, which makes this process energy intensive. This research presents a three-step synthesis of coloring agents, capable of adhering onto synthetic polypropylene yarns without harsh energy-consuming conditions. This is possible by encapsulation of organic pigments using trimethoxyphenylsilane, introduction of surface double bonds via modification of the silica shell with trimethoxysilylpropylmethacrylate and final attachment of highly adhesive anchor peptides using thiol-ene chemistry. We demonstrate the applicability of this approach by dyeing polypropylene yarns in a simple process under ambient conditions after giving a step-by-step guide for the synthesis of these new dyeing agents. Finally, the successful dyeing of the yarns is visualized, and its practicability is discussed. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1380 KW - anchor peptides KW - organic dye pigments KW - coloring agents KW - polypropylene yarns Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-548913 SN - 1866-8372 IS - 1-2 ER - TY - BOOK T1 - EUCHIS '99 : proceedings of the 3rd international conference of the European Chitin Society, Potsdam, Germany, Aug. 31 - Sept. 3, 1999 N2 - Contents: Production and Applications of Chitin and Chitosan Krill as a promising raw material for the production of chitin in Europe - Containerized plant for producing chitin - Preparation and characterization of chitosan from Mucorales - Chitosan from Absidia orchidis - Scaling up of lactic acid fermentation of prawn wastes in packed-bed column reactor for chitin recovery - Preparation of chitin by acetic acid fermentation - Inter-source reproducibility of the chitin deacetylation process - Comparative analysis of chitosans from insects and crustacea - Effect of the rate of deacetylation on the physico-chemical properties of cuttlefish chitosan - Deacetylation of chitin by fungal enzymes - Production of partially degraded chitosan with desired molecular weight - Chitin-containing materials Mycoton for wounds treatment - Biological activity of selected forms of chitosan - Application of chitosan on the preservation quality of cut flowers - Preparation and characterization of chitosan films: application in cell cultures - Transport phenomena in chitin gels - Symplex membranes of chitosan and sulphoethylcellulose - Preparation and use of chitosan-Ca pectinate pellets - Bioseparation of protein from cheese whey by using chitosan coagulation and ultrafiltration membranes - Preparation of silk fibroin/chitosan fiber - Preparation of paper sheets containing microcrystalline chitosan - Applications of chitosan in textile printing - Permanent modification of fibrous materials with biopolymers - Ion exchanger from chitosan - Chitosan in waste water treatment - The immobilization of tyrosinase on chitin and chitosan and its possible use in wastewater treatment - Utilization of modified chitosan in aqueous system treatment Biomaterials Chemical and preclinical studies on 6-oxychitin - Diverse biological effects of fungal chitin-glucan complex - Effect of concentration of neutralizing agent on chitosan membrane properties - Preliminary investigation of the compatibility of a chitosan-based peritoneal dialysis solution - Influence of chitosan on the growth of several cellular lines - A new chitosan containing phosphonic group with chelating properties - Biocompatibility of chitin materials using cell culture method Oral Administration of Chitosan Recent results in the oral administration of chitosan - Reduction of absorption of dietary lipids and cholesterol by chitosan, its derivatives and special formulations - Chitosan in weight reduction: results from a large scale consumer study - Conformation of chitosan ascorbic acid salt - Trimethylated chitosans as safe absorption enhancers for transmucosal delivery of peptide drugs - Chitosan derivates as intestinal penetration enhancers of the peptide drug buserelin in vivo and in vitro - Chitosan microparticles for oral vaccination: optimization and characterization - Effect of chitosan in enhancing drug delivery across buccal mucosa - Influence of chitosans on permeability of human intestinal epithelial (Caco-2) cells: The effect of molecular weight, degree of deacetylation and exposure time - Oral polymeric N-acetyl-D-glucosamine as potential treatment for patients with osteoarthritis - Clinicoimmunological efficiency of the chitin-containing drug Mycoton in complex treatment of a chronic hepatitis - Interactions of chitin, chitosan, N-laurylchitosan, and N-dimethylaminopropyl chitosan with olive oil - The chitin-containing preparation Mycoton in a pediatric gastroenterology case - Antifungal activity and release behaviour of cross-linked chitosan films incorporated with chlorhexidine gluconate - Release of N-acetyl-D-glucosamine from chitosan in saliva - Physical and Physicochemical Properties Recent approach of metal binding by chitosan and derivatives - As(V) sorption on molybdate-impregnated chitosan gel beads (MICB) - Influence of medium pH on the biosorption of heavy metals by chitin-containing sorbent Mycoton - Comparative studies on molecular chain parameters of polyelectrolyte chains: the stiffness parameter B and temperature coefficient of intrinsic viscosity of chitosans and poly(diallyldimethylammonium chloride) - Crystalline behavior of chitosan - The relationship between the crystallinity and degree of deacetylation of chitin from crab shell - Reversible water-swellable chitin gel: modulation of swellability - Syneresis aspects of chitosan based gel systems - In situ chitosan gelation using the enzyme tyrosinase - Preparation and characterization of controlling pore size chitosan membranes - Fabrication of porous chitin matrices - Changes of polydispersity and limited molecular weight of ultrasonic treated chitosan - A statistical evaluation of IR spectroscopic methods to determine the degree of acetylation of ?-chitin and chitosan - Products of alkaline hydrolysis of dibutyrylchitin: chemical composition and DSC investigation - Chitosan emulsification properties Chemistry of Chitin and Chitosan Chemically modified chitinous materials: preparation and properties - Progress on the modification of chitosan - The graft copolymerization of chitosan with methyl acrylate using an organohalide-manganese carbonyl coinitiator system - Grafting of 4-vinylpyridine, maleic acid and maleic anhydride onto chitin and chitosan - Peptide synthesis on chitosan/chitin - Graft copolymerization of methyl methacrylate onto mercapto-chitin - Thermal depolymerization of chitosan salts - Radiolysis and sonolysis of chitosan - two convenient techniques for a controlled reduction of molecular weight - Thermal and UV degradation of chitosan - Heat-induced physicochemical changes in highly deacetylated chitosan - Chitosan fiber and its chemical N-modification at the fiber state for use as functional materials - Preparation of a fiber reactive chitosan derivative with enhanced microbial activity - Chromatographic separation of rare earths with complexane types of chemically modified chitosan - The effects of detergents on chitosan - Chitosan-alginate PEC films prepared from chitosan of different molecular weights - Enzymology of Chitin and Chitosan Biosynthesis and Degradation Enzymes of chitin metabolism for the design of antifungals - Enzymatic degradation of chitin by microorganisms - Kinetic behaviours of chitinase isozymes - An acidic chitinase from gizzards of broiler (Gallus gallus L.) - On the contribution of conserved acidic residues to catalytic activity of chitinase B from Serratia marcescens - Detection, isolation and preliminary characterisation of a new hyperthermophilic chitinase from the anaerobic archaebacterium Thermococcus chitonophagus - Biochemical and genetic engineering studies on chitinase A from Serratia marcescens - Induction of chitinase production by Serratia marcescens, using a synthetic N-acetylglucosamine derivative - Libraries of chito-oligosaccharides of mixed acetylation patterns and their interactions with chitinases - Approaches towards the design of new chitinase inhibitors - Allosamidin inhibits the fragmentation and autolysis of Penicillium chrysogenum - cDNA encoding chitinase in the midge, Chironomus tentans - Extraction and purification of chitosanase from Bacillus cereus - Substrate binding mechanism of chitosanase from Streptomyces sp. N174 - Chitosanase-catalyzed hydrolysis of 4-methylumbelliferyl ?-chitotrioside - A rust fungus turns chitin into chitosan upon plant tissue colonization to evade recognition by the host - Antibiotic kanosamine is an inhibitor of chitin biosynthesis in fungi - PCR amplification of chitin deacetylase genes - Amplification of antifungal effect of GlcN-6-P synthase and chitin synthase inhibitors - ?-N-Acetylhexosaminidases: two enzyme families, two mechanisms - Purification and characterisation of chitin deacetylase from Absidia orchidis - Effect of aluminium ion on hydrolysis reaction of carboxymethyl- and dihydroxypropyl-chitin with lysozyme - Structure and function relatioship of human N-acetyl-D-glucosamine 2-epimerase (renin binding protein) - Identification of active site residue(s) Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-45492 SN - 978-3-980649-45-2 ER -