TY - THES A1 - Grätz, Fabio M. T1 - Nonlinear diffusion in granular gases and dense planetary rings N2 - Small moonlets or moons embedded in dense planetary rings create S-shaped density modulations called propellers if their masses are smaller than a certain threshold, alternatively they create a circumferential gap in the disk if the embedded body’s mass exceeds this threshold (Spahn and Sremčević, 2000). The gravitational perturber scatters the ring particles, depletes the disk’s density, and, thus, clears a gap, whereas counteracting viscous diffusion of the ring material has the tendency to close the created gap, thereby forming a propeller. Propeller objects were predicted by Spahn and Sremčević (2000) and Sremčević et al. (2002) and were later discovered by the Cassini space probe (Tiscareno et al., 2006, Sremčević et al., 2007, Tiscareno et al., 2008, and Tiscareno et al., 2010). The ring moons Pan and Daphnis are massive enough to maintain the circumferential Encke and Keeler gaps in Saturn’s A ring and were detected by Showalter (1991) and Porco (2005) in Voyager and Cassini images, respectively. In this thesis, a nonlinear axisymmetric diffusion model is developed to describe radial density profiles of circumferential gaps in planetary rings created by embedded moons (Grätz et al., 2018). The model accounts for the gravitational scattering of the ring particles by the embedded moon and for the counteracting viscous diffusion of the ring matter back into the gap. With test particle simulations it is shown that the scattering of the ring particles passing the moon is larger for small impact parameters than estimated by Goldreich and Tremaine (1980). This is especially significant for the modeling of the Keeler gap. The model is applied to the Encke and Keeler gaps with the aim to estimate the shear viscosity of the ring in their vicinities. In addition, the model is used to analyze whether tiny icy moons whose dimensions lie below Cassini’s resolution capabilities would be able to cause the poorly understood gap structure of the C ring and the Cassini Division. One of the most intriguing facets of Saturn’s rings are the extremely sharp edges of the Encke and Keeler gaps: UVIS-scans of their gap edges show that the optical depth drops from order unity to zero over a range of far less than 100 m, a spatial scale comparable to the ring’s vertical extent. This occurs despite the fact that the range over which a moon transfers angular momentum onto the ring material is much larger. Borderies et al. (1982, 1989) have shown that this striking feature is likely related to the local reversal of the usually outward-directed viscous transport of angular momentum in strongly perturbed regions. We have revised the Borderies et al. (1989) model using a granular flow model to define the shear and bulk viscosities, ν and ζ, in order to incorporate the angular momentum flux reversal effect into the axisymmetric diffusion model for circumferential gaps presented in this thesis (Grätz et al., 2019). The sharp Encke and Keeler gap edges are modeled and conclusions regarding the shear and bulk viscosities of the ring are discussed. Finally, we explore the question of whether the radial density profile of the central and outer A ring, recently measured by Tiscareno and Harris (2018) in the highest resolution to date, and in particular, the sharp outer A ring edge can be modeled consistently from the balance of gravitational scattering by several outer moons and the mass and momentum transport. To this aim, the developed model is extended to account for the inward drifts caused by multiple discrete and overlapping resonances with multiple outer satellites and is then used to hydrodynamically simulate the normalized surface mass density profile of the A ring. This section of the thesis is based on studies by Tajeddine et al. (2017a) who recently discussed the common misconception that the 7:6 resonance with Janus alone maintains the outer A ring edge, showing that the combined effort of several resonances with several outer moons is required to confine the A ring as observed by the Cassini spacecraft. KW - celestial mechanics KW - diffusion KW - hydrodynamics KW - planets and satellites: rings KW - scattering Y1 - 2020 ER - TY - JOUR A1 - Dunsing, Valentin A1 - Petrich, Annett A1 - Chiantia, Salvatore T1 - Multicolor fluorescence fluctuation spectroscopy in living cells via spectral detection JF - eLife N2 - Signaling pathways in biological systems rely on specific interactions between multiple biomolecules. Fluorescence fluctuation spectroscopy provides a powerful toolbox to quantify such interactions directly in living cells. Cross-correlation analysis of spectrally separated fluctuations provides information about intermolecular interactions but is usually limited to two fluorophore species. Here, we present scanning fluorescence spectral correlation spectroscopy (SFSCS), a versatile approach that can be implemented on commercial confocal microscopes, allowing the investigation of interactions between multiple protein species at the plasma membrane. We demonstrate that SFSCS enables cross-talk-free cross-correlation, diffusion, and oligomerization analysis of up to four protein species labeled with strongly overlapping fluorophores. As an example, we investigate the interactions of influenza A virus (IAV) matrix protein 2 with two cellular host factors simultaneously. We furthermore apply raster spectral image correlation spectroscopy for the simultaneous analysis of up to four species and determine the stoichiometry of ternary IAV polymerase complexes in the cell nucleus. KW - fluorescence KW - optical microscopy KW - virus assembly KW - protein-protein KW - interactions KW - diffusion KW - Viruses Y1 - 2021 U6 - https://doi.org/10.7554/eLife.69687 SN - 2050-084X VL - 10 PB - eLife Sciences Publications CY - Cambridge ER - TY - THES A1 - Klumpp, Stefan T1 - Movements of molecular motors : diffusion and directed walks N2 - Bewegungen von prozessiven molekularen Motoren des Zytoskeletts sind durch ein Wechselspiel von gerichteter Bewegung entlang von Filamenten und Diffusion in der umgebenden Lösung gekennzeichnet. Diese eigentümlichen Bewegungen werden in der vorliegenden Arbeit untersucht, indem sie als Random Walks auf einem Gitter modelliert werden. Ein weiterer Gegenstand der Untersuchung sind Effekte von Wechselwirkungen zwischen den Motoren auf diese Bewegungen. Im einzelnen werden vier Transportphänomene untersucht: (i) Random Walks von einzelnen Motoren in Kompartimenten verschiedener Geometrien, (ii) stationäre Konzentrationsprofile, die sich in geschlossenen Kompartimenten infolge dieser Bewegungen einstellen, (iii) randinduzierte Phasenübergänge in offenen röhrenartigen Kompartimenten, die an Motorenreservoirs gekoppelt sind, und (iv) der Einfluß von kooperativen Effekten bei der Motor-Filament-Bindung auf die Bewegung. Alle diese Phänomene sind experimentell zugänglich, und mögliche experimentelle Realisierungen werden diskutiert. N2 - Movements of processive cytoskeletal motors are characterized by an interplay between directed motion along filament and diffusion in the surrounding solution. In the present work, these peculiar movements are studied by modeling them as random walks on a lattice. An additional subject of our studies is the effect of motor-motor interactions on these movements. In detail, four transport phenomena are studied: (i) Random walks of single motors in compartments of various geometries, (ii) stationary concentration profiles which build up as a result of these movements in closed compartments, (iii) boundary-induced phase transitions in open tube-like compartments coupled to reservoirs of motors, and (iv) the influence of cooperative effects in motor-filament binding on the movements. All these phenomena are experimentally accessible and possible experimental realizations are discussed. KW - molekulare Motoren KW - aktive Prozesse KW - Diffusion KW - Random Walks KW - Gittermodelle KW - Phasenübergänge KW - Staus KW - kooperative Phänomene KW - molecular motors KW - active processes KW - diffusion KW - random walks KW - lattice models KW - phase transitions KW - traffic jams KW - cooperative phenomena Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0000806 ER - TY - THES A1 - Šustr, David T1 - Molecular diffusion in polyelectrolyte multilayers N2 - Research on novel and advanced biomaterials is an indispensable step towards their applications in desirable fields such as tissue engineering, regenerative medicine, cell culture, or biotechnology. The work presented here focuses on such a promising material: polyelectrolyte multilayer (PEM) composed of hyaluronic acid (HA) and poly(L-lysine) (PLL). This gel-like polymer surface coating is able to accumulate (bio-)molecules such as proteins or drugs and release them in a controlled manner. It serves as a mimic of the extracellular matrix (ECM) in composition and intrinsic properties. These qualities make the HA/PLL multilayers a promising candidate for multiple bio-applications such as those mentioned above. The work presented aims at the development of a straightforward approach for assessment of multi-fractional diffusion in multilayers (first part) and at control of local molecular transport into or from the multilayers by laser light trigger (second part). The mechanism of the loading and release is governed by the interaction of bioactives with the multilayer constituents and by the diffusion phenomenon overall. The diffusion of a molecule in HA/PLL multilayers shows multiple fractions of different diffusion rate. Approaches, that are able to assess the mobility of molecules in such a complex system, are limited. This shortcoming motivated the design of a novel evaluation tool presented here. The tool employs a simulation-based approach for evaluation of the data acquired by fluorescence recovery after photobleaching (FRAP) method. In this approach, possible fluorescence recovery scenarios are primarily simulated and afterwards compared with the data acquired while optimizing parameters of a model until a sufficient match is achieved. Fluorescent latex particles of different sizes and fluorescein in an aqueous medium are utilized as test samples validating the analysis results. The diffusion of protein cytochrome c in HA/PLL multilayers is evaluated as well. This tool significantly broadens the possibilities of analysis of spatiotemporal FRAP data, which originate from multi-fractional diffusion, while striving to be widely applicable. This tool has the potential to elucidate the mechanisms of molecular transport and empower rational engineering of the drug release systems. The second part of the work focuses on the fabrication of such a spatiotemporarily-controlled drug release system employing the HA/PLL multilayer. This release system comprises different layers of various functionalities that together form a sandwich structure. The bottom layer, which serves as a reservoir, is formed by HA/PLL PEM deposited on a planar glass substrate. On top of the PEM, a layer of so-called hybrids is deposited. The hybrids consist of thermoresponsive poly(N-isopropylacrylamide) (PNIPAM) -based hydrogel microparticles with surface-attached gold nanorods. The layer of hybrids is intended to serve as a gate that controls the local molecular transport through the PEM–solution-interface. The possibility of stimulating the molecular transport by near-infrared (NIR) laser irradiation is being explored. From several tested approaches for the deposition of hybrids onto the PEM surface, the drying-based approach was identified as optimal. Experiments, that examine the functionality of the fabricated sandwich at elevated temperature, document the reversible volume phase transition of the PEM-attached hybrids while sustaining the sandwich stability. Further, the gold nanorods were shown to effectively absorb light radiation in the tissue- and cell-friendly NIR spectral region while transducing the energy of light into heat. The rapid and reversible shrinkage of the PEM-attached hybrids was thereby achieved. Finally, dextran was employed as a model transport molecule. It loads into the PEM reservoir in a few seconds with the partition constant of 2.4, while it spontaneously releases in a slower, sustained manner. The local laser irradiation of the sandwich, which contains the fluorescein isothiocyanate tagged dextran, leads to a gradual reduction of fluorescence intensity in the irradiated region. The release system fabricated employs renowned photoresponsivity of the hybrids in an innovative setting. The results of the research are a step towards a spatially-controlled on-demand drug release system that paves the way to spatiotemporally controlled drug release. The approaches developed in this work have the potential to elucidate the molecular dynamics in ECM and to foster engineering of multilayers with properties tuned to mimic the ECM. The work aims at spatiotemporal control over the diffusion of bioactives and their presentation to the cells. N2 - Die Forschung an neuartigen und komplexen Biomaterialien ist unabdingbar für deren Einsatz in begehrten Bereichen wie der Gewebezüchtung, regenerativen Medizin, Zellkultivierung und Biotechnologie. Die hier vorgelegte Arbeit beschäftigt sich eingehend mit einem dieser vielversprechenden Materialien: Polyelektrolytische Multilayers (PEM), die aus Hyaluronsäure (Hyaluronic Acid, HA) und Poly-L-Lysin (PLL) zusammengesetzt sind. Diese gelartige Polymerbeschichtung ermöglicht es, (Bio-) Moleküle wie z.B. Proteine oder Medikamente zu akkumulieren und diese kontrolliert wieder abzugeben. Durch ihre Zusammensetzung und intrinsischen Merkmale können die PEM der Imitation einer Extrazellulären Matrix (ECM) dienen. Diese Eigenschaften machen die HA/PLL-PEM zu einem Anwärter auf verschiedene Bio-Anwendungen, wie den oben genannten. Die vorliegende Arbeit zielt auf die Entwicklung eines Ansatzes zur Einschätzung der multi-fraktionellen Diffusion in Multilayers (1. Teil), und auf die Kontrolle des lokalen molekularen Transports in und aus den Multilayers durch Laser-Stimulation (2. Teil). Der Aufnahme- und Freisetzungsmechanismus wird bestimmt von der Wechselwirkung zwischen Bioaktiva und den Bestandteilen der Multilayers, sowie allgemein vom Diffusionsprozess. Der Diffusion eines Molekül in HA/PLL-PEM weist unterschiedliche Diffusionsraten einzelner Molekülbestandteile auf. Derzeit existieren nur wenige Ansätze zur Einschätzung der Mobilität von Molekülen in derart komplexen Systemen. Diesem Mangel will die vorliegende Arbeit durch das Design eines neuartigen Evaluations-Instruments abhelfen. Dieses Instrument bedient sich eines simulationsbasierten Ansatzes zur Evaluation von Daten, die durch die fluorescence recovery after photobleaching (FRAP) -Methode erfasst wurden. Der Ansatz simuliert zunächst mögliche Szenarien der Fluoreszenz-Rückbildung, um diese anschließend mit Messdaten zu vergleichen; dazu werden Modell-Parameter angepasst, um suffiziente Vergleichswerte zu erzielen. Fluoreszierende Latex-Partikel verschiedener Größe und eine Fluoresceinlösung wurden als Kontroll- und Vergleichs-Proben verwendet, um die Ergebnisse zu überprüfen. Zusätzlich wurde die Diffusion des Proteins Cytochrom C in eine HA/PLL-PEM ausgewertet. Dieses Instrument weitet die Möglichkeiten der Analyse von spatiotemporären FRAP-Daten, die aus der multi-fraktionellen Diffusion stammen, erheblich und gleichzeitig ist es vielseitig einsetzbar. Das Instrument hat das Potential, die Mechanismen des Molekültransports weiter zu erhellen, und eine gezielte Steuerung der Freisetzung medikamentöser Wirkstoffe zu ermöglichen. Der zweite Teil der Arbeit widmet sich der Erstellung eines Systems zur spatiotemporären Wirkstofffreisetzung, das sich die HA/PLL-PEM zunutze macht. Dieses Freisetzungssystem umfasst verschiedene Lagen mit jeweils unterschiedlichen Funktionsweisen, die zusammen ein „Sandwich“ bilden. Die zugrundeliegende Schicht aus HA/PLL-PEM auf einem planaren Glassubstrat dient als Reservoir. Auf diese PEM ist eine Schicht sogenannter Hybride aufgebracht. Die Hybride bestehen aus thermoresponsiven Poly-N-Isopropylacrylamid (PNIPAM) -basierten Hydrogel-Mikropartikeln auf deren Gold-Nanostäbchen gebunden sind. Die Hybridschicht dient in der räumlichen Kontrolle des lokalen Molekültransports als „Schlupfloch“ an der Schnittstelle von PEM und Lösung. Die Möglichkeit der Stimulation des molekülaren Transports durch Bestrahlung mit einem Nah-Infrarot-Laser (NIR) wird hier untersucht. Von den mehreren getesteten Ansätzen zur Aufbringung von Hybriden auf die PEM-Oberfläche stellte sich die Trocknung als beste Möglichkeit heraus. Funktionalitätskontrollen des hergestellten Sandwiches bei erhöhter Temperatur ergaben eine reversible Volumenphasenübergang der PEM-gebundenen Hybride, wobei die Sandwich-Struktur erhalten blieb. Weiterhin wurde eine effektive Lichtabsorption durch die Gold-Nanostäbchen in den gewebe- und zellschonenden NIR-Spektrumsbereich gezeigt, wobei die aufgenommene Lichtenergie in Wärme umgewandelt wurde. Dadurch wurde eine schnelle und reversible Schrumpfung der PEM-gebundenen Hybride erreicht. Zuguterletzt wird Dextran als Modellmolekül für den Transport eingesetzt. Dieses wird in wenigen Sekunden – mit einem Verteilungskoeffizient von 2,4 – in das PEM-Reservoir aufgenommen, während es auf langsamere, anhaltende Weise freigesetzt wird. Die lokale Laser-Bestrahlung des Dextran-FITC-haltigen Sandwiches bewirkte eine schrittweise Reduktion der Fluoreszenz-Intensität in der bestrahlten Region. Das hier vorgestellte Molekül-Freisetzungssystem verwendet die vielzitierte Photoresponsivität von Hybriden auf neuartige Weise. Die Ergebnisse der Untersuchung bedeuten einen Fortschritt in Richtung eines räumlich kontrollierten, nach Bedarf steuerbaren Freisetzungs-Systems, das wiederum den Weg zu einer spatiotemporären Kontrollierbarkeit der Wirkstoff-Freisetzung bereiten könnte. Die in dieser Arbeit entwickelten Ansätze ermöglichen ein besseres Verständnis der Dynamik in der ECM, sowie die Entwicklung ECM-ähnlicher Multilayers. Die Arbeit hat die spatiotemporäre Kontrolle der Diffusion von bioaktiven Stoffen und deren Präsentation gegenüber Zellen zum Ziel. T2 - Molekulare Diffusion in Polyelektrolyt-Multischichten KW - polyelectrolyte multilayers KW - diffusion KW - simulation KW - FRAP KW - microgel KW - drug release KW - PNIPAM KW - IR laser KW - assessment of the diffusion KW - mulifractional diffusion KW - spatially and temporally controlled drug release KW - ordering of particles on the surface KW - close packing KW - dichteste Packung KW - Diffusion KW - Einschätzung der Diffusion KW - Wirkstoff-Freisetzun KW - Mikrogel KW - multi-fraktionelle Diffusion KW - Ordnung der Partikel auf der Oberfläche KW - Polyelektrolyt-Multischichten KW - Simulation KW - räumlich und zeitlich kontrollierte Wirkstoff-Freisetzung KW - FRAP KW - IR laser KW - PNIPAM Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-489038 ER - TY - JOUR A1 - Spallanzani, Roberta A1 - Koga, Kenneth T. A1 - Cichy, Sarah B. A1 - Wiedenbeck, Michael A1 - Schmidt, Burkhard C. A1 - Oelze, Marcus A1 - Wilke, Max T1 - Lithium and boron diffusivity and isotopic fractionation in hydrated rhyolitic melts JF - Contributions to mineralogy and petrology N2 - Lithium and boron are trace components of magmas, released during exsolution of a gas phase during volcanic activity. In this study, we determine the diffusivity and isotopic fractionation of Li and B in hydrous silicate melts. Two glasses were synthesized with the same rhyolitic composition (4.2 wt% water), having different Li and B contents; these were studied in diffusion-couple experiments that were performed using an internally heated pressure vessel, operated at 300 MPa in the temperature range 700-1250 degrees C for durations from 0 s to 24 h. From this we determined activation energies for Li and B diffusion of 57 +/- 4 kJ/mol and 152 +/- 15 kJ/mol with pre-exponential factors of 1.53 x 10(-7) m(2)/s and 3.80 x 10(-8) m(2)/s, respectively. Lithium isotopic fractionation during diffusion gave beta values between 0.15 and 0.20, whereas B showed no clear isotopic fractionation. Our Li diffusivities and isotopic fractionation results differ somewhat from earlier published values, but overall confirm that Li diffusivity increases with water content. Our results on B diffusion show that similarly to Li, B mobility increases in the presence of water. By applying the Eyring relation, we confirm that B diffusivity is limited by viscous flow in silicate melts. Our results on Li and B diffusion present a new tool for understanding degassing-related processes, offering a potential geospeedometer to measure volcanic ascent rates. KW - stable isotopes KW - diffusion KW - isotopic fractionation KW - hydrated silicate KW - melts Y1 - 2022 U6 - https://doi.org/10.1007/s00410-022-01937-2 SN - 0010-7999 SN - 1432-0967 VL - 177 IS - 8 PB - Springer CY - New York ER - TY - THES A1 - Spallanzani, Roberta T1 - Li and B in ascending magmas: an experimental study on their mobility and isotopic fractionation T1 - Li und B in aufsteigenden Magmen: eine experimentelle Studie über ihre Mobilität und Isotopenfraktionierung N2 - This research study focuses on the behaviour of Li and B during magmatic ascent, and decompression-driven degassing related to volcanic systems. The main objective of this dissertation is to determine whether it is possible to use the diffusion properties of the two trace elements as a tool to trace magmatic ascent rate. With this objective, diffusion-couple and decompression experiments have been performed in order to study Li and B mobility in intra-melt conditions first, and then in an evolving system during decompression-driven degassing. Synthetic glasses were prepared with rhyolitic composition and an initial water content of 4.2 wt%, and all the experiments were performed using an internally heated pressure vessel, in order to ensure a precise control on the experimental parameters such as temperature and pressure. Diffusion-couple experiments were performed with a fix pressure 300 MPa. The temperature was varied in the range of 700-1250 °C with durations between 0 seconds and 24 hours. The diffusion-couple results show that Li diffusivity is very fast and starts already at very low temperature. Significant isotopic fractionation occurs due to the faster mobility of 6Li compared to 7Li. Boron diffusion is also accelerated by the presence of water, but the results of the isotopic ratios are unclear, and further investigation would be necessary to well constrain the isotopic fractionation process of boron in hydrous silicate melts. The isotopic ratios results show that boron isotopic fractionation might be affected by the speciation of boron in the silicate melt structure, as 10B and 11B tend to have tetrahedral and trigonal coordination, respectively. Several decompression experiments were performed at 900 °C and 1000 °C, with pressures going from 300 MPa to 71-77 MPa and durations of 30 minutes, two, five and ten hours, in order to trigger water exsolution and the formation of vesicles in the sample. Textural observations and the calculation of the bubble number density confirmed that the bubble size and distribution after decompression is directly proportional to the decompression rate. The overall SIMS results of Li and B show that the two trace elements tend to progressively decrease their concentration with decreasing decompression rates. This is explained because for longer decompression times, the diffusion of Li and B into the bubbles has more time to progress and the melt continuously loses volatiles as the bubbles expand their volumes. For fast decompression, Li and B results show a concentration increase with a δ7Li and δ11B decrease close to the bubble interface, related to the sudden formation of the gas bubble, and the occurrence of a diffusion process in the opposite direction, from the bubble meniscus to the unaltered melt. When the bubble growth becomes dominant and Li and B start to exsolve into the gas phase, the silicate melt close to the bubble gets depleted in Li and B, because of a stronger diffusion of the trace elements into the bubble. Our data are being applied to different models, aiming to combine the dynamics of bubble nucleation and growth with the evolution of trace elements concentration and isotopic ratios. Here, first considerations on these models will be presented, giving concluding remarks on this research study. All in all, the final remarks constitute a good starting point for further investigations. These results are a promising base to continue to study this process, and Li and B can indeed show clear dependences on decompression-related magma ascent rates in volcanic systems. N2 - Diese Forschungsstudie konzentriert sich auf das Verhalten von Li und B während des magmatischen Aufstiegs und der Druckentlastungsbedingten Entgasung im Zusammenhang mit vulkanischen Systemen. Das Hauptziel dieser Dissertation besteht darin, festzustellen, ob es möglich ist, die Diffusionseigenschaften der beiden Spurenelemente als Instrument zur Verfolgung der magmatischen Aufstiegsgeschwindigkeit zu nutzen. Unter Verwendung von synthetischen Gläsern mit rhyolitischer Zusammensetzung und einem Wassergehalt von 4,2 Gew.-% wurden Diffusionspaar- und Druckentlastungsexperimente durchgeführt, um die Mobilität von Li und B zunächst in der Schmelze und dann in einem sich entwickelnden System während der Druckentlastungsgetriebenen Entgasung zu untersuchen. Diffusionspaar wurden mit einem festen Druck von 300 MPa durchgeführt. Die Temperatur wurde im Bereich von 700-1250 °C variiert, wobei die Dauer zwischen 0 Sekunden und 24 Stunden lag. Unsere Ergebnisse zeigen, dass die Diffusionsfähigkeit von Li sehr schnell ist und bei sehr niedrigen Temperaturen auftritt. Eine Isotopenfraktionierung findet aufgrund der schnelleren Mobilität von 6Li im Vergleich zu 7Li statt. Die Diffusion von Bor wird durch die Anwesenheit von Wasser ebenfalls beschleunigt, bleibt aber langsamer als die von Li. Die Ergebnisse der Isotopenverhältnisse zeigen, dass die Bor-Isotopenfraktionierung durch die Speziation von Bor in der Silikatschmelze beeinflusst werden könnte, da 10B und 11B tendenziell eine tetraedrische bzw. trigonale Koordination aufweisen. Druckentlastungsversuche wurden bei 900 °C und 1000 °C mit Drücken von 300 MPa bis 71-77 MPa und einer Dauer von 30 Minuten, zwei, fünf und zehn Stunden durchgeführt, um die Wasserauflösung und die Bildung von Gasblasen in der Probe auszulösen. Texturbeobachtungen und die Berechnung der Blasenanzahldichte bestätigten, dass die Blasengröße und -verteilung nach der Druckentlastung direkt proportional zur Druckentlastungsrate ist. Generell zeigen die SIMS-Analysergebnisse von Li und B, dass die Konzentration der beiden Spurenelemente mit abnehmender Druckentlastungsgeschwindigkeit allmählich abnimmt. Dies ist darauf zurückzuführen, dass bei längeren Druckentlastungszeiten mehr Zeit für die Diffusion von Li und B in die Blasen zur Verfügung steht und die Schmelze kontinuierlich flüchtige Bestandteile verliert, während die Blasen ihr Volumen ausdehnen. Bei schnellen Druckentlastungen zeigen die Li- und B-Ergebnisse einen Konzentrationsanstieg mit einer δ7Li- und δ11B-Abnahme in der Nähe der Blasengrenzfläche, was mit der plötzlichen Bildung der Glasbläser und dem Auftreten eines Diffusionsprozesses in der entgegengesetzten Richtung, vom Blasenmeniskus zur unveränderten Schmelze, zusammenhängt. Wenn das Blasenwachstum dominiert und Li und B in die Gasphase übergehen, verarmt die Silikat Schmelze in der Nähe der Blase an Li und B, da die Spurenelemente stärker in die Blase diffundieren. Unsere Daten werden auf verschiedene Modelle angewandt, die darauf abzielen, die Dynamik der Blasenkernbildung und des Blasenwachstums mit der Entwicklung der Spurenelementkonzentration und des Isotopenverhältnisses zu kombinieren. Hier werden erste Überlegungen zu diesen Modellen vorgestellt und abschließende Bemerkungen zu dieser Forschungsstudie gemacht. Diese Ergebnisse sind eine vielversprechende Grundlage für die weitere Untersuchung von Li und B, um dekompressionsbedingte Magma-Aufstiegsraten in vulkanischen Systemen zu ermitteln. KW - magma degassing KW - diffusion KW - stable isotopes KW - isotopic fractionation KW - Diffusion KW - Isotopenfraktionierung KW - Magma-Entgasung KW - stabile Isotope Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-560619 ER - TY - JOUR A1 - Thapa, Samudrajit A1 - Wyłomańska, Agnieszka A1 - Sikora, Grzegorz A1 - Wagner, Caroline E. A1 - Krapf, Diego A1 - Kantz, Holger A1 - Chechkin, Aleksei V. A1 - Metzler, Ralf T1 - Leveraging large-deviation statistics to decipher the stochastic properties of measured trajectories JF - New Journal of Physics N2 - Extensive time-series encoding the position of particles such as viruses, vesicles, or individualproteins are routinely garnered insingle-particle tracking experiments or supercomputing studies.They contain vital clues on how viruses spread or drugs may be delivered in biological cells.Similar time-series are being recorded of stock values in financial markets and of climate data.Such time-series are most typically evaluated in terms of time-averaged mean-squareddisplacements (TAMSDs), which remain random variables for finite measurement times. Theirstatistical properties are different for differentphysical stochastic processes, thus allowing us toextract valuable information on the stochastic process itself. To exploit the full potential of thestatistical information encoded in measured time-series we here propose an easy-to-implementand computationally inexpensive new methodology, based on deviations of the TAMSD from itsensemble average counterpart. Specifically, we use the upper bound of these deviations forBrownian motion (BM) to check the applicability of this approach to simulated and real data sets.By comparing the probability of deviations fordifferent data sets, we demonstrate how thetheoretical bound for BM reveals additional information about observed stochastic processes. Weapply the large-deviation method to data sets of tracer beads tracked in aqueous solution, tracerbeads measured in mucin hydrogels, and of geographic surface temperature anomalies. Ouranalysis shows how the large-deviation properties can be efficiently used as a simple yet effectiveroutine test to reject the BM hypothesis and unveil relevant information on statistical propertiessuch as ergodicity breaking and short-time correlations. KW - diffusion KW - anomalous diffusion KW - large-deviation statistic KW - time-averaged mean squared displacement KW - Chebyshev inequality Y1 - 2020 U6 - https://doi.org/10.1088/1367-2630/abd50e SN - 1367-2630 VL - 23 PB - Dt. Physikalische Ges. ; IOP CY - Bad Honnef ; London ER - TY - GEN A1 - Thapa, Samudrajit A1 - Wyłomańska, Agnieszka A1 - Sikora, Grzegorz A1 - Wagner, Caroline E. A1 - Krapf, Diego A1 - Kantz, Holger A1 - Chechkin, Aleksei V. A1 - Metzler, Ralf T1 - Leveraging large-deviation statistics to decipher the stochastic properties of measured trajectories T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Extensive time-series encoding the position of particles such as viruses, vesicles, or individualproteins are routinely garnered insingle-particle tracking experiments or supercomputing studies.They contain vital clues on how viruses spread or drugs may be delivered in biological cells.Similar time-series are being recorded of stock values in financial markets and of climate data.Such time-series are most typically evaluated in terms of time-averaged mean-squareddisplacements (TAMSDs), which remain random variables for finite measurement times. Theirstatistical properties are different for differentphysical stochastic processes, thus allowing us toextract valuable information on the stochastic process itself. To exploit the full potential of thestatistical information encoded in measured time-series we here propose an easy-to-implementand computationally inexpensive new methodology, based on deviations of the TAMSD from itsensemble average counterpart. Specifically, we use the upper bound of these deviations forBrownian motion (BM) to check the applicability of this approach to simulated and real data sets.By comparing the probability of deviations fordifferent data sets, we demonstrate how thetheoretical bound for BM reveals additional information about observed stochastic processes. Weapply the large-deviation method to data sets of tracer beads tracked in aqueous solution, tracerbeads measured in mucin hydrogels, and of geographic surface temperature anomalies. Ouranalysis shows how the large-deviation properties can be efficiently used as a simple yet effectiveroutine test to reject the BM hypothesis and unveil relevant information on statistical propertiessuch as ergodicity breaking and short-time correlations. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1118 KW - diffusion KW - anomalous diffusion KW - large-deviation statistic KW - time-averaged mean squared displacement KW - Chebyshev inequality Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-493494 SN - 1866-8372 IS - 1118 ER - TY - THES A1 - Roder, Phillip T1 - Kombination von Fluoreszenzmikroskopie und Rasterkraftmikroskopie zur Aufklärung physiologischer Prozesse in lebenden Zellen T1 - Combination of fluorescence microscopy and atomic force microscopy for the investigation of physiological processes in living cells BT - Charakterisierung und Anwendung einer neuartigen lokalen Mikromanipulationstechnik BT - characterisation and application of a novel local micromanipulation technique N2 - Innerhalb dieser Doktorarbeit wurde eine neuartige Mikromanipulationstechnik für die lokale Flüssigkeitsabgabe am komplexen Drüsengewebe der Schabe P. americana charakterisiert und für die damit verbundene gezielte Manipulation von einzelnen Zellen in einem Zellkomplex (Gewebe) angewandt. Bei dieser Mikromanipulationstechnik handelt es sich um die seit 2009 bekannte nanofluidische Rasterkraftmikroskopie (FluidFM = fluidic force microscopy). Dabei werden sehr kleine mikrokanälige Rasterkraftspitzen bzw. Mikro-/Nanopipetten mit einer Öffnung zwischen 300 nm und 2 µm verwendet, mit denen es möglich ist, sehr kleine Volumina im Pikoliter- bis Femtoliter-Bereich (10-12 L – 10-15 L) gezielt und ortsgenau abzugeben. Das Ziel dieser Arbeit war die Analyse zellulärer Prozesse, wie z. B. Zell-Zell-Kommunikation oder Signalweiterleitung, zwischen benachbarten Zellen unter Zuhilfenahme der Fluoreszenzmikroskopie. Mit dieser Methode können die Zellen und ihre Bestandteile mittels vorheriger Farbstoffbeladung unter einem Mikroskop mit hohem Kontrast optisch dargestellt werden. Mit Hilfe der Fluoreszenzmikroskopie sollten schlussendlich die zellulären Reaktionen innerhalb des Gewebes nach der lokalen Manipulation visualisiert werden. Zunächst wurde die Anwendung des Systems an Luft und wässriger Umgebung beschrieben. In diesem Zusammenhang wurde eine Reinigungs- und Beladungsmethode entwickelt, mit der es möglich war, die kostspieligen Mikro-/Nanopipetten zu reinigen und anschließend mehrmals wiederzuverwenden. Hierzu wurde eine alternative Methode getestet, mit der das Diffusionsverhalten von Farbstoffmolekülen in unterschiedlichen Medien untersucht werden kann. Des Weiteren wurden die Systemparameter optimiert, welche nötig sind, um zwischen der Probenoberfläche und der Pipette einen guten Pipettenöffnungs-abschluss zu erhalten. Dieser Abschluss ist essentiell, damit die abgegebene Flüssigkeit ausschließlich in der Abgaberegion mit der Probe wechselwirkt und die darauffolgenden Reaktionen nur innerhalb des Gewebes erfolgen, da ansonsten die Zell-Zell-Signalweiterleitung zwischen den Zellen nicht eindeutig nachvollzogen werden kann. Diese interzelluläre Kommunikation wurde anhand zweier sekundärer Botenstoffe (Ca2+ und NO) untersucht. Hierbei war es möglich einzelne lokale Reaktionen zu detektieren, welche sich über weitere Zellen ausbreiteten. Schlussendlich wurde die Fertigung einer speziellen Injektionspipette beschrieben, welche an zwei biologischen Systemen getestet wurde. N2 - Within this thesis, a novel micromanipulation technique was characterised for the local liquid delivery at the complex salivary glands tissue of the cockroach P. americana and was applied for the associated targeted manipulation of single cells in a cell complex (tissue). This micromanipulation technique is known since 2009 as the fluidic force microscopy (FluidFM) technique. In this case, very small microchanneled AFM tips or rather micro-/nanopipettes with an opening between 300 nm and 2 μm are used to deliver very small volumes in the picoliter to femtoliter range (10-12 L - 10-15 L) targeted and accurate. The aim of this work was the analysis of cellular processes, such as cell-cell communication or signal transduction, between adjacent cells using fluorescence microscopy. Using this method, the cells and their components can be optically visualised by prior dye loading under a microscope with high contrast. Using fluorescence microscopy, the cellular responses within the tissue were finally visualised after local manipulation. First, the application of the system in air and aqueous environment was described. In this context, a cleaning and loading method was developed which allows the cleaning and the repeated reuse of the expensive micro-/nanopipettes. For this purpose, an alternative method has been tested, with which the diffusion of dye molecules in different media can be examined. Furthermore, the system parameters needed to obtain a good pipette opening sealing between the sample surface and the pipette have been optimised. This sealing is essential to ensure that the delivered liquid interacts only with the sample in the delivery region and that subsequent reactions occur only within the tissue, otherwise cell-cell signaling between the cells can not be clearly understood. This intercellular communication was studied by means of two secondary messengers (Ca2+ and NO). Here it was possible to detect individual local reactions that spread over more cells. Finally, the production of a special injection pipette was described, which was tested on two biological systems. KW - Rasterkraftmikroskopie KW - Fluoreszenzmikroskopie KW - Mikromanipulation KW - Zellgewebe KW - Diffusion KW - atomic force microscopy KW - fluorescence microscopy KW - micromanipulation KW - cellular tissue KW - diffusion Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-419806 ER - TY - JOUR A1 - Seiß, Martin A1 - Albers, Nicole A1 - Sremčević, Miodrag A1 - Schmidt, Jürgen A1 - Salo, Heikki A1 - Seiler, Michael A1 - Hoffmann, Holger A1 - Spahn, Frank T1 - Hydrodynamic Simulations of Moonlet-induced Propellers in Saturn's Rings BT - Application to Bleriot JF - The astronomical journal N2 - One of the biggest successes of the Cassini mission is the detection of small moons (moonlets) embedded in Saturns rings that cause S-shaped density structures in their close vicinity, called propellers. Here, we present isothermal hydrodynamic simulations of moonlet-induced propellers in Saturn's A ring that denote a further development of the original model. We find excellent agreement between these new hydrodynamic and corresponding N-body simulations. Furthermore, the hydrodynamic simulations confirm the predicted scaling laws and the analytical solution for the density in the propeller gaps. Finally, this mean field approach allows us to simulate the pattern of the giant propeller Blériot, which is too large to be modeled by direct N-body simulations. Our results are compared to two stellar occultation observations by the Cassini Ultraviolet Imaging Spectrometer (UVIS), which intersect the propeller Blériot. Best fits to the UVIS optical depth profiles are achieved for a Hill radius of 590 m, which implies a moonlet diameter of about 860 m. Furthermore, the model favors a kinematic shear viscosity of the surrounding ring material of ν0 = 340 cm2 s−1, a dispersion velocity in the range of 0.3 cm s−1 < c0 < 1.5 cm s−1, and a fairly high bulk viscosity 7 < ξ0/ν0 < 17. These large transport values might be overestimated by our isothermal ring model and should be reviewed by an extended model including thermal fluctuations. KW - diffusion KW - hydrodynamics KW - planets and satellites: rings Y1 - 2018 U6 - https://doi.org/10.3847/1538-3881/aaed44 SN - 0004-6256 SN - 1538-3881 VL - 157 IS - 1 PB - IOP Publishing Ltd. CY - Bristol ER - TY - JOUR A1 - Prokopovic, Vladimir Z. A1 - Duschl, Claus A1 - Volodkin, Dmitry T1 - Hyaluronic Acid/Poly-l-Lysine Multilayers as Reservoirs for Storage and Release of Small Charged Molecules JF - Macromolecular bioscience N2 - Polyelectrolyte multilayer films are nowadays very attractive for bioapplications due to their tunable properties and ability to control cellular response. Here we demonstrate that multilayers made of hyaluronic acid and poly-l-lysine act as high-capacity reservoirs for small charged molecules. Strong accumulation within the film is explained by electrostatically driven binding to free charges of polyelectrolytes. Binding and release mechanisms are discussed based on charge balance and polymer dynamics in the film. Our results show that transport of molecules through the film-solution interface limits the release rate. The multilayers might serve as an effective platform for drug delivery and tissue engineering due to high potential for drug loading and controlled release. KW - diffusion KW - drug delivery KW - dye KW - release mechanism Y1 - 2015 U6 - https://doi.org/10.1002/mabi.201500093 SN - 1616-5187 SN - 1616-5195 VL - 15 IS - 10 SP - 1357 EP - 1363 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Palyulin, Vladimir V. A1 - Metzler, Ralf T1 - How a finite potential barrier decreases the mean first-passage time JF - Journal of statistical mechanics: theory and experiment N2 - We consider the mean first-passage time of a random walker moving in a potential landscape on a finite interval, the starting and end points being at different potentials. From analytical calculations and Monte Carlo simulations we demonstrate that the mean first-passage time for a piecewise linear curve between these two points is minimized by the introduction of a potential barrier. Due to thermal fluctuations, this barrier may be crossed. It turns out that the corresponding expense for this activation is less severe than the gain from an increased slope towards the end point. In particular, the resulting mean first-passage time is shorter than for a linear potential drop between the two points. KW - diffusion Y1 - 2012 U6 - https://doi.org/10.1088/1742-5468/2012/03/L03001 SN - 1742-5468 IS - 1 PB - IOP Publ. Ltd. CY - Bristol ER - TY - GEN A1 - Grebenkov, Denis S. A1 - Metzler, Ralf A1 - Oshanin, Gleb T1 - From single-particle stochastic kinetics to macroscopic reaction rates BT - fastest first-passage time of N random walkers T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - We consider the first-passage problem for N identical independent particles that are initially released uniformly in a finite domain Ω and then diffuse toward a reactive area Γ, which can be part of the outer boundary of Ω or a reaction centre in the interior of Ω. For both cases of perfect and partial reactions, we obtain the explicit formulas for the first two moments of the fastest first-passage time (fFPT), i.e., the time when the first out of the N particles reacts with Γ. Moreover, we investigate the full probability density of the fFPT. We discuss a significant role of the initial condition in the scaling of the average fFPT with the particle number N, namely, a much stronger dependence (1/N and 1/N² for partially and perfectly reactive targets, respectively), in contrast to the well known inverse-logarithmic behaviour found when all particles are released from the same fixed point. We combine analytic solutions with scaling arguments and stochastic simulations to rationalise our results, which open new perspectives for studying the relevance of multiple searchers in various situations of molecular reactions, in particular, in living cells. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1018 KW - diffusion KW - first-passage KW - fastest first-passage time of N walkers Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-484059 SN - 1866-8372 IS - 1018 ER - TY - JOUR A1 - Grebenkov, Denis S. A1 - Metzler, Ralf A1 - Oshanin, Gleb T1 - From single-particle stochastic kinetics to macroscopic reaction rates BT - fastest first-passage time of N random walkers JF - New Journal of Physics N2 - We consider the first-passage problem for N identical independent particles that are initially released uniformly in a finite domain Ω and then diffuse toward a reactive area Γ, which can be part of the outer boundary of Ω or a reaction centre in the interior of Ω. For both cases of perfect and partial reactions, we obtain the explicit formulas for the first two moments of the fastest first-passage time (fFPT), i.e., the time when the first out of the N particles reacts with Γ. Moreover, we investigate the full probability density of the fFPT. We discuss a significant role of the initial condition in the scaling of the average fFPT with the particle number N, namely, a much stronger dependence (1/N and 1/N² for partially and perfectly reactive targets, respectively), in contrast to the well known inverse-logarithmic behaviour found when all particles are released from the same fixed point. We combine analytic solutions with scaling arguments and stochastic simulations to rationalise our results, which open new perspectives for studying the relevance of multiple searchers in various situations of molecular reactions, in particular, in living cells. KW - diffusion KW - first-passage KW - fastest first-passage time of N walkers Y1 - 2020 U6 - https://doi.org/10.1088/1367-2630/abb1de SN - 1367-2630 VL - 22 PB - Dt. Physikalische Ges. CY - Bad Honnef ER - TY - JOUR A1 - Grätz, Fabio M. A1 - Seiss, Martin A1 - Spahn, Frank T1 - Formation of moon-induced gaps in dense planetary rings BT - application to the rings of saturn JF - The astrophysical journal : an international review of spectroscopy and astronomical physics N2 - We develop an axisymmetric diffusion model to describe radial density profiles in the vicinity of tiny moons embedded in planetary rings. Our diffusion model accounts for the gravitational scattering of the ring particles by an embedded moon and for the viscous diffusion of the ring matter back into the gap. With test particle simulations, we show that the scattering of the ring particles passing the moon is larger for small impact parameters than estimated by Goldreich & Tremaine and Namouni. This is significant for modeling the Keeler gap. We apply our model to the gaps of the moons Pan and Daphnis embedded in the outer A ring of Saturn with the aim to estimate the shear viscosity of the ring in the vicinity of the Encke and Keeler gap. In addition, we analyze whether tiny icy moons whose dimensions lie below Cassini's resolution capabilities would be able to explain the gap structure of the C ring and the Cassini division. KW - diffusion KW - planets and satellites: rings KW - scattering Y1 - 2018 U6 - https://doi.org/10.3847/1538-4357/aace00 SN - 0004-637X SN - 1538-4357 VL - 862 IS - 2 PB - IOP Publ. Ltd. CY - Bristol ER - TY - GEN A1 - Woodfield, Emma E. A1 - Horne, Richard B. A1 - Glauert, Sarah A. A1 - Menietti, John D. A1 - Shprits, Yuri A1 - Kurth, William S. T1 - Formation of electron radiation belts at Saturn by Z-mode wave acceleration T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - At Saturn electrons are trapped in the planet's magnetic field and accelerated to relativistic energies to form the radiation belts, but how this dramatic increase in electron energy occurs is still unknown. Until now the mechanism of radial diffusion has been assumed but we show here that in-situ acceleration through wave particle interactions, which initial studies dismissed as ineffectual at Saturn, is in fact a vital part of the energetic particle dynamics there. We present evidence from numerical simulations based on Cassini spacecraft data that a particular plasma wave, known as Z-mode, accelerates electrons to MeV energies inside 4 R-S (1 R-S = 60,330 km) through a Doppler shifted cyclotron resonant interaction. Our results show that the Z-mode waves observed are not oblique as previously assumed and are much better accelerators than O-mode waves, resulting in an electron energy spectrum that closely approaches observed values without any transport effects included. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1032 KW - astrophysical plasmas KW - giant planets KW - magnetospheric physics KW - diffusion KW - pitch angle KW - plasma KW - radio KW - region Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-468342 SN - 1866-8372 IS - 1032 ER - TY - JOUR A1 - Sposini, Vittoria A1 - Chechkin, Aleksei V. A1 - Metzler, Ralf T1 - First passage statistics for diffusing diffusivity JF - Journal of physics : A, Mathematical and theoretical N2 - A rapidly increasing number of systems is identified in which the stochastic motion of tracer particles follows the Brownian law < r(2)(t)> similar or equal to Dt yet the distribution of particle displacements is strongly non-Gaussian. A central approach to describe this effect is the diffusing diffusivity (DD) model in which the diffusion coefficient itself is a stochastic quantity, mimicking heterogeneities of the environment encountered by the tracer particle on its path. We here quantify in terms of analytical and numerical approaches the first passage behaviour of the DD model. We observe significant modifications compared to Brownian-Gaussian diffusion, in particular that the DD model may have a faster first passage dynamics. Moreover we find a universal crossover point of the survival probability independent of the initial condition. KW - diffusion KW - superstatistics KW - first passage Y1 - 2018 U6 - https://doi.org/10.1088/1751-8121/aaf6ff SN - 1751-8113 SN - 1751-8121 VL - 52 IS - 4 PB - IOP Publ. Ltd. CY - Bristol ER - TY - JOUR A1 - Mutothya, Nicholas Mwilu A1 - Xu, Yong A1 - Li, Yongge A1 - Metzler, Ralf A1 - Mutua, Nicholas Muthama T1 - First passage dynamics of stochastic motion in heterogeneous media driven by correlated white Gaussian and coloured non-Gaussian noises JF - Journal of physics. Complexity N2 - We study the first passage dynamics for a diffusing particle experiencing a spatially varying diffusion coefficient while driven by correlated additive Gaussian white noise and multiplicative coloured non-Gaussian noise. We consider three functional forms for position dependence of the diffusion coefficient: power-law, exponential, and logarithmic. The coloured non-Gaussian noise is distributed according to Tsallis' q-distribution. Tracks of the non-Markovian systems are numerically simulated by using the fourth-order Runge-Kutta algorithm and the first passage times (FPTs) are recorded. The FPT density is determined along with the mean FPT (MFPT). Effects of the noise intensity and self-correlation of the multiplicative noise, the intensity of the additive noise, the cross-correlation strength, and the non-extensivity parameter on the MFPT are discussed. KW - first passage KW - diffusion KW - non-Gaussian KW - correlated noise Y1 - 2021 U6 - https://doi.org/10.1088/2632-072X/ac35b5 SN - 2632-072X VL - 2 PB - IOP Publishing CY - Bristol ER - TY - JOUR A1 - Shin, Jaeoh A1 - Cherstvy, Andrey G. A1 - Kim, Won Kyu A1 - Metzler, Ralf T1 - Facilitation of polymer looping and giant polymer diffusivity in crowded solutions of active particles JF - New journal of physics : the open-access journal for physics N2 - We study the dynamics of polymer chains in a bath of self-propelled particles (SPP) by extensive Langevin dynamics simulations in a two-dimensional model system. Specifically, we analyse the polymer looping properties versus the SPP activity and investigate how the presence of the active particles alters the chain conformational statistics. We find that SPPs tend to extend flexible polymer chains, while they rather compactify stiffer semiflexible polymers, in agreement with previous results. Here we show that higher activities of SPPs yield a higher effective temperature of the bath and thus facilitate the looping kinetics of a passive polymer chain. We explicitly compute the looping probability and looping time in a wide range of the model parameters. We also analyse the motion of a monomeric tracer particle and the polymer's centre of mass in the presence of the active particles in terms of the time averaged mean squared displacement, revealing a giant diffusivity enhancement for the polymer chain via SPP pooling. Our results are applicable to rationalising the dimensions and looping kinetics of biopolymers at constantly fluctuating and often actively driven conditions inside biological cells or in suspensions of active colloidal particles or bacteria cells. KW - diffusion KW - active transport KW - polymers Y1 - 2015 U6 - https://doi.org/10.1088/1367-2630/17/11/113008 SN - 1367-2630 VL - 17 PB - IOP Publ. Ltd. CY - Bristol ER - TY - JOUR A1 - Grebenkov, Denis S. A1 - Sposini, Vittoria A1 - Metzler, Ralf A1 - Oshanin, Gleb A1 - Seno, Flavio T1 - Exact distributions of the maximum and range of random diffusivity processes JF - New Journal of Physics N2 - We study the extremal properties of a stochastic process xt defined by the Langevin equation ẋₜ =√2Dₜ ξₜ, in which ξt is a Gaussian white noise with zero mean and Dₜ is a stochastic‘diffusivity’, defined as a functional of independent Brownian motion Bₜ.We focus on threechoices for the random diffusivity Dₜ: cut-off Brownian motion, Dₜt ∼ Θ(Bₜ), where Θ(x) is the Heaviside step function; geometric Brownian motion, Dₜ ∼ exp(−Bₜ); and a superdiffusive process based on squared Brownian motion, Dₜ ∼ B²ₜ. For these cases we derive exact expressions for the probability density functions of the maximal positive displacement and of the range of the process xₜ on the time interval ₜ ∈ (0, T).We discuss the asymptotic behaviours of the associated probability density functions, compare these against the behaviour of the corresponding properties of standard Brownian motion with constant diffusivity (Dₜ = D0) and also analyse the typical behaviour of the probability density functions which is observed for a majority of realisations of the stochastic diffusivity process. KW - random diffusivity KW - extremal values KW - maximum and range KW - diffusion KW - Brownian motion Y1 - 2021 U6 - https://doi.org/10.1088/1367-2630/abd313 SN - 1367-2630 VL - 23 PB - Dt. Physikalische Ges. CY - Bad Honnef ER -