TY - THES A1 - Charan, Himanshu T1 - Self assembled transmembrane protein polymer conjugates for the generation of nano thin membranes and micro compartments T1 - Selbstassemblierte Transmembranprotein-Polymer Konjugate für die Herstellung von nanodünnen Membranen und Mikrokompartimenten N2 - This project was focused on generating ultra thin stimuli responsive membranes with an embedded transmembrane protein to act as the pore. The membranes were formed by crosslinking of transmembrane protein polymer conjugates. The conjugates were self assembled on air water interface and the polymer chains crosslinked using a UV crosslinkable comonomer to engender the membrane. The protein used for the studies reported herein was one of the largest transmembrane channel proteins, ferric hydroxamate uptake protein component A (FhuA), found in the outer membrane of Escherichia coli (E. coli). The wild type protein and three genetic variants of FhuA were provided by the group of Prof. Schwaneberg in Aachen. The well known thermo responsive poly(N isopropylacrylamide) (PNIPAAm) and the pH and thermo responsive polymer poly((2-dimethylamino)ethyl methacrylate) (PDMAEMA) were conjugated to FhuA and the genetic variants via controlled radical polymerization (CRP) using grafting from technique. These polymers were chosen because they would provide stimuli handles in the resulting membranes. The reported polymerization was the first ever attempt to attach polymer chains onto a membrane protein using site specific modification. The conjugate synthesis was carried out in two steps – a) FhuA was first converted into a macroinitiator by covalently linking a water soluble functional CRP initiator to the lysine residues. b) Copper mediated CRP was then carried out in pure buffer conditions with and without sacrificial initiator to generate the conjugates. The challenge was carrying out the modifications on FhuA without denaturing it. FhuA, being a transmembrane protein, requires amphiphilic species to stabilize its highly hydrophobic transmembrane region. For the experiments reported in this thesis, the stabilizing agent was 2 methyl 2,4-pentanediol (MPD). Since the buffer containing MPD cannot be considered a purely aqueous system, and also because MPD might interfere with the polymerization procedure, the reaction conditions were first optimized using a model globular protein, bovine serum albumin (BSA). The optimum conditions were then used for the generation of conjugates with FhuA. The generated conjugates were shown to be highly interfacially active and this property was exploited to let them self assemble onto polar apolar interfaces. The emulsions stabilized by particles or conjugates are referred to as Pickering emulsions. Crosslinking conjugates with a UV crosslinkable co monomer afforded nano thin micro compartments. Interfacial self assembly at the air water interface and subsequent UV crosslinking also yielded nano thin, stimuli responsive membranes which were shown to be mechanically robust. Initial characterization of the flux and permeation of water through these membranes is also reported herein. The generated nano thin membranes with PNIPAAm showed reduced permeation at elevated temperatures owing to the resistance by the hydrophobic and thus water-impermeable polymer matrix, hence confirming the stimulus responsivity. Additionally, as a part of collaborative work with Dr. Changzhu Wu, TU Dresden, conjugates of three enzymes with current/potential industrial relevance (candida antarctica lipase B, benzaldehyde lyase and glucose oxidase) with stimuli responsive polymers were synthesized. This work aims at carrying out cascade reactions in the Pickering emulsions generated by self assembled enzyme polymer conjugate. N2 - Im Rahmen dieses Projekts wurden ultradünne Stimuli responsive Membranen hergestellt, in die ein Transmembranprotein als Pore eingebettet ist. Die Membranen wurden durch das Verlinken von Transmembranprotein-Polymer Konjugaten an Grenzflächen hergestellt. Dazu wurden Konjugate an der Luft-Wasser-Grenzfläche selbstassembliert und die Polymerketten unter Verwendung eines UV-vernetzbaren Comonomers vernetzt. Als Protein wurde einer der größten Transmembran-Proteinkanäle, welcher sich in der Natur in der äußeren Membran von Escherichia coli (E. coli) findet, verwendet, nämlich ferric hydroxamate uptake protein component A (FhuA). Das Wildtyp-Protein und drei genetische Varianten von FhuA wurden von der Gruppe von Prof. Schwaneberg in Aachen zur Verfügung gestellt. Das bekannte thermo responsive Poly(N-isopropylacrylamid) (PNIPAAm) und das pH- und thermo responsive Polymer Poly((2-dimethylamino) ethylmethacrylat) (PDMAEMA) wurden über kontrollierte radikalische Polymerisationen (CRP) via der grafting-from Technik an FhuA und die genetischen Varianten konjugiert. Diese responsiven Polymere wurden ausgewählt, weil die Eigenschaften der resultierenden Membranen folglich durch äußere Einflusse verändert werden können. Dabei handelt es sich um das erste Beispiel, Polymerketten von einem Membranprotein ortsspezifisch zu synthetisieren. Die Konjugatsynthese wurde in zwei Schritten durchgeführt - a) zuerst wurde ein FhuA Makroinitiator durch Anbinden funktioneller CRP Initiatoren an die Lysinreste des Proteins dargestellt. B) durch Kupfer-vermittelte CRP wurden dann in Pufferlösung sowohl mit als auch ohne Opferinitiator die Konjugate synthetisiert. Die Herausforderung bestand darin, FhuA zu modifizieren ohne das Protein dabei zu denaturieren. Als Transmembranprotein benötigt FhuA amphiphile Agentien, um seine hydrophobe Transmembran Region zu stabilisieren. Für die im Rahmen dieser Arbeit durchgeführten Experimente war das stabilisierende Agens 2-Methyl-2,4-pentandiol (MPD). Da der MPD-Puffer nicht als rein wässriges Medium betrachtet werden kann, und auch, weil MPD das Polymerisationsverfahren beeinflussen könnte, wurden die Reaktionsbedingungen zunächst unter Verwendung eines globulären Modellproteins, nämlich Rinderserumalbumin (BSA), optimiert. Die optimalen Bedingungen wurden dann für die Erzeugung von Konjugaten mit FhuA verwendet. Die Konjugate zeigten eine hohe Grenzflächenaktivität und diese Eigenschaft wurde für die Selbstassemblierung an polaren/apolaren Grenzflächen ausgenutzt. Wurden Emulsionen durch die Konjugate stabilisiert, so bezeichnet man dies als Pickering-Emulsionen. Das Vernetzen von Konjugaten mit einem UV-vernetzbaren Co-Monomer führt zu nano-dünnen Mikrokompartimenten. Die Selbstassemblierung an der Luft-Wasser-Grenzfläche und anschließende UV-Vernetzung ergaben nano-dünne, Stimuli-responsive Membranen, die sich als mechanisch robust erwiesen. Eine erste Charakterisierung des Flusses und der Permeation von Wasser durch die Membranen wird ebenfalls in dieser Arbeit beschrieben. Die erzeugten nano dünnen Membranen mit PNIPAAm zeigten eine verminderte Permeation bei erhöhten Temperaturen aufgrund der nun hydrophoben und damit wasserundurchlässigen Polymermatrix. Darüber hinaus wurden für eine Kooperation mit Dr. Changzhu Wu, TU Dresden, Konjugate von drei Enzymen mit industrieller Relevanz (Candida antarctica Lipase B, Benzaldehydlyase und Glucose-Oxidase) synthetisiert. Diese Arbeit zielt auf Kaskadenreaktionen in Pickering-Emulsionen, die durch selbstassemblierte Enzym-Polymer Konjugate katalysiert werden. KW - FhuA KW - transmembrane protein KW - protein-polymer conjugate KW - controlled radical polymerization KW - ultra-thin membrane KW - FhuA KW - Transmembranprotein KW - Protein-Polymer Konjugaten KW - kontrollierte radikalische Polymerisationen KW - ultradünne Membranen Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-402060 SP - xii, 138 ER - TY - GEN A1 - Grunwald, Nicolas A1 - Kelling, Alexandra A1 - Holdt, Hans-Jürgen A1 - Schilde, Uwe T1 - The crystal structure of 1,1′-bisisoquinoline, C18H12N2 N2 - C18H12N2, tetragonal, I41/a (no. 88), a=13.8885(6) Å, c=13.6718(6) Å, V =2637.2(3) Å3, Z =8, Rgt(F)=0.0295, wRref(F2)=0.0854, T =210 K. CCDC no.: 631823 T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 380 Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-401952 ER - TY - GEN A1 - Schilde, Uwe A1 - Paz, Christian A1 - Ortiz, Leandro T1 - Crystal structure of erioflorin isolated from Podanthus mitiqui (L.) N2 - The title compound, erioflorin, C19H24O6 [systematic name: (1aR,3S,4Z,5aR,8aR,9R,10aR)-1a, 2,3,5a, 7,8,8a, 9,10,10a-decahydro-3-hydroxy-4,10a-dimethyl-8-methylidene-7-oxooxireno[5,6] cyclodeca[1,2-b]furan-9-yl methacrylate], is a tricyclic germacrane sesquiterpene lactone, which was isolated from Podanthus mitiqui (L.). The compound crystallizes in the space group P2(1)2(1)2(1), and its molecular structure consists of a methacrylic ester of a ten-membered ring sesquiterpenoid annelated with an epoxide and a butyrolactone. The structure is stabilized by one intramolecular C-H center dot center dot center dot O hydrogen bond. An O-H center dot center dot center dot O hydrogen bond and further C-H center dot center dot center dot O interactions can be observed in the packing. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 379 KW - Podanthus mitiqui KW - crystal structure KW - germacrane sesquiterpene lactone Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-401832 ER - TY - GEN A1 - Mirskova, Anna N. A1 - Adamovich, Sergey N. A1 - Mirskov, Rudolf G. A1 - Schilde, Uwe T1 - Reaction of pharmacological active tris-(2-hydroxyethyl)ammonium 4-chlorophenylsulfanylacetate with ZnCl2 or NiCl2 BT - first conversion of a protic ionic liquid into metallated ionic liquid N2 - The reaction of pharmacological active protic ionic liquid tris-(2-hydroxyethyl)ammonium 4-chlorophenylsulfanylacetate H + N(CH 2 CH 2 OH) 3 ∙ ( - OOCCH 2 SC 6 H 4 Cl-4) (1) with zinc or nickel chloride in a ratio of 2:1 affords stable at room temperature powder-like adducts [H + N(CH 2 CH 2 OH) 3 ] 2 ∙ [M(OOCCH 2 SC 6 H 4 Cl-4) 2 Cl 2 ] 2- , M = Zn (2), Ni (3). By recrystallization from aqueous alcohol compound 2 unexpectedly gives Zn(OOCCH 2 SC 6 H 4 Cl-4) 2 ∙ 2H 2 O (4). Unlike 2, compound 3 gives crystals [N(CH 2 CH 2 OH) 3 ] 2 Ni 2+ · [ - OOCCH 2 SC 6 H 4 Cl-4] 2 (5), which have a structure of metallated ionic liquid. The structure of 5 has been proved by X-ray diffraction analysis. It is the first example of the conversion of a protic ionic liquid into potentially biological active metallated ionic liquid (1 → 3 → 5). T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 377 KW - Formate KW - Salts KW - Acids Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-401099 ER - TY - GEN A1 - Adamovich, Sergey N. A1 - Mirskova, Anna N. A1 - Mirskov, Rudolf G. A1 - Schilde, Uwe T1 - Synthesis and crystal structure of 1,4,10,13-tetraoxa-7,16-diazoniumcyclo-octadecane bis(4-chloro-2-methyl-phenoxyacetate) N2 - The title compound was prepared by the reaction of 1,4,10,13-tetraoxa-7,16-diazacyclo-octadecane with 4-chloro-2-methyl-phenoxyacetic acid in a ratio of 1:2. The structure has been proved by the data of elemental analysis, IR spectroscopy, NMR ( 1 H, 13 C) technique and by X-ray diffraction analysis. Intermolecular hydrogen bonds between the azonium protons and oxygen atoms of the carboxylate groups were found. Immunoactive properties of the title compound have been screened. The compound has the ability to suppress spontaneous and Con A-stimulated cell proliferation in vitro and therefore can be considered as immunodepressant. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 369 KW - salts Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-400905 ER - TY - GEN A1 - Enzenberg, Anne A1 - Laschewsky, André A1 - Boeffel, Christine A1 - Wischerhoff, Erik T1 - Influence of the near molecular vicinity on the temperature regulated fluorescence response of poly(N-vinylcaprolactam) N2 - A series of new fluorescent dye bearing monomers, including glycomonomers, based on maleamide and maleic esteramide was synthesized. The dye monomers were incorporated by radical copolymerization into thermo-responsive poly(N-vinyl-caprolactam) that displays a lower critical solution temperature (LCST) in aqueous solution. The effects of the local molecular environment on the polymers' luminescence, in particular on the fluorescence intensity and the extent of solvatochromism, were investigated below as well as above the phase transition. By attaching substituents of varying size and polarity in the close vicinity of the fluorophore, and by varying the spacer groups connecting the dyes to the polymer backbone, we explored the underlying structure-property relationships, in order to establish rules for successful sensor designs, e.g., for molecular thermometers. Most importantly, spacer groups of sufficient length separating the fluorophore from the polymer backbone proved to be crucial for obtaining pronounced temperature regulated fluorescence responses. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 363 KW - thermo-responsive polymers KW - poly(N-vinylcaprolactam) KW - lower critical solution temperature KW - fluorescent dyemonomers KW - naphthalimide KW - solvatochromism KW - polymeric sensors KW - molecular thermometers Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-400634 ER - TY - GEN A1 - Zehbe, Kerstin A1 - Kollosche, Matthias A1 - Lardong, Sebastian A1 - Kelling, Alexandra A1 - Schilde, Uwe A1 - Taubert, Andreas T1 - Ionogels based on poly(methyl methacrylate) and metal-containing ionic liquids BT - correlation between structure and mechanical and electrical properties N2 - Ionogels (IGs) based on poly(methyl methacrylate) (PMMA) and the metal-containing ionic liquids (ILs) bis-1-butyl-3-methlimidazolium tetrachloridocuprate(II), tetrachloride cobaltate(II), and tetrachlorido manganate(II) have been synthesized and their mechanical and electrical properties have been correlated with their microstructure. Unlike many previous examples, the current IGs show a decreasing stability in stress-strain experiments on increasing IL fractions. The conductivities of the current IGs are lower than those observed in similar examples in the literature. Both effects are caused by a two-phase structure with micrometer-sized IL-rich domains homogeneously dispersed an IL-deficient continuous PMMA phase. This study demonstrates that the IL-polymer miscibility and the morphology of the IGs are key parameters to control the (macroscopic) properties of IGs. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 361 KW - microstructure KW - ionogels KW - ionic liquids KW - phase separation KW - mechanical properties KW - ionic conductivity Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-400607 ER - TY - GEN A1 - König, Jana A1 - Kelling, Alexandra A1 - Schilde, Uwe A1 - Strauch, Peter T1 - [µ2-O,O′,Oʺ,Oʺ′-Bis(1,2-dithiooxalato-S,S′)nickel(II)]bis[-O,O′-bis(1,2-dithiooxalato-S,S′)-nickel(II)pentaquaholmium(III)]hydrate, [Ho2Ni3(dto)6(H2O)10] N2 - Planar bis(1,2-dithiooxalato)nickelate(II), [Ni(dto)]2− reacts in aqueous solutions with lanthanide ions (Ln3+) to form pentanuclear, hetero-bimetallic complexes of the general composition [{Ln(H2O)n}2{Ni(dto)2}3]·xH2O. (n = 4 or 5; x = 9–12). The complex [{Ho(H2O)5}2{Ni(dto)2}3]·10H2O, Ho2Ni3, was synthesized and characterized by single crystal X-ray structure analysis and powder diffraction. The Ho2Ni3 complex crystallizes as monoclinic crystals in the space group P21/c. The channels and cavities, appearing in the crystal packing of the complex molecules, are occupied by a varying amount of non-coordinated water molecules. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 360 KW - lanthanides KW - holmium(III) KW - 1,2-dithiooxalate KW - crystal structure KW - nickel(II) Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-400598 ER - TY - GEN A1 - Hardy, John G. A1 - Torres-Rendon, Jose Guillermo A1 - Leal-Egaña, Aldo A1 - Walther, Andreas A1 - Schlaad, Helmut A1 - Cölfen, Helmut A1 - Scheibel, Thomas R. T1 - Biomineralization of engineered spider silk protein-based composite materials for bone tissue engineering N2 - Materials based on biodegradable polyesters, such as poly(butylene terephthalate) (PBT) or poly(butylene terephthalate-co-poly(alkylene glycol) terephthalate) (PBTAT), have potential application as pro-regenerative scaffolds for bone tissue engineering. Herein, the preparation of films composed of PBT or PBTAT and an engineered spider silk protein, (eADF4(C16)), that displays multiple carboxylic acid moieties capable of binding calcium ions and facilitating their biomineralization with calcium carbonate or calcium phosphate is reported. Human mesenchymal stem cells cultured on films mineralized with calcium phosphate show enhanced levels of alkaline phosphatase activity suggesting that such composites have potential use for bone tissue engineering. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 359 KW - spider silk KW - recombinant protein KW - biodegradable polymers KW - biomaterials KW - biomineralization KW - bone tissue engineering Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-400519 ER - TY - GEN A1 - Taubert, Andreas A1 - Balischewski, Christian A1 - Hentrich, Doreen A1 - Elschner, Thomas A1 - Eidner, Sascha A1 - Günter, Christina A1 - Behrens, Karsten A1 - Heinze, Thomas T1 - Water-soluble cellulose derivatives are sustainable additives for biomimetic calcium phosphate mineralization N2 - The effect of cellulose-based polyelectrolytes on biomimetic calcium phosphate mineralization is described. Three cellulose derivatives, a polyanion, a polycation, and a polyzwitterion were used as additives. Scanning electron microscopy, X-ray diffraction, IR and Raman spectroscopy show that, depending on the composition of the starting solution, hydroxyapatite or brushite precipitates form. Infrared and Raman spectroscopy also show that significant amounts of nitrate ions are incorporated in the precipitates. Energy dispersive X-ray spectroscopy shows that the Ca/P ratio varies throughout the samples and resembles that of other bioinspired calcium phosphate hybrid materials. Elemental analysis shows that the carbon (i.e., polymer) contents reach 10% in some samples, clearly illustrating the formation of a true hybrid material. Overall, the data indicate that a higher polymer concentration in the reaction mixture favors the formation of polymer-enriched materials, while lower polymer concentrations or high precursor concentrations favor the formation of products that are closely related to the control samples precipitated in the absence of polymer. The results thus highlight the potential of (water-soluble) cellulose derivatives for the synthesis and design of bioinspired and bio-based hybrid materials. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 354 KW - cellulose KW - polyamine KW - polyammonium salt KW - polycarboxylate KW - polyzwitterion KW - calcium phosphate KW - biomineralization KW - brushite KW - hydroyxapatite KW - biomaterial Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-400453 ER - TY - THES A1 - Jordan, Thomas T1 - CxNy-materials from supramolecular precursors for “All-Carbon” composite materials T1 - CxNy-Materialien aus supramolekularen Precursoren für „All-Carbon“-Komposit-Materialien N2 - Among modern functional materials, the class of nitrogen-containing carbons combines non-toxicity and sustainability with outstanding properties. The versatility of this materials class is based on the opportunity to tune electronic and catalytic properties via the nitrogen content and –motifs: This ranges from the electronically conducting N-doped carbon, where few carbon atoms in the graphitic lattice are substituted by nitrogen, to the organic semiconductor graphitic carbon nitride (g-C₃N₄), with a structure based on tri-s-triazine units. In general, composites can reveal outstanding catalytic properties due to synergistic behavior, e.g. the formation of electronic heterojunctions. In this thesis, the formation of an “all-carbon” heterojunction was targeted, i.e. differences in the electronic properties of the single components were achieved by the introduction of different nitrogen motives into the carbon lattice. Such composites are promising as metal-free catalysts for the photocatalytic water splitting. Here, hydrogen can be generated from water by light irradiation with the use of a photocatalyst. As first part of the heterojunction, the organic semiconductor g-C₃N₄ was employed, because of its suitable band structure for photocatalytic water splitting, high stability and non-toxicity. The second part was chosen as C₂N, a recently discovered semiconductor. Compared to g-C₃N₄, the less nitrogen containing C₂N has a smaller band gap and a higher absorption coefficient in the visible light range, which is expected to increase the optical absorption in the composite eventually leading to an enhanced charge carrier separation due to the formation of an electronic heterojunction. The aim of preparing an “all-carbon” composite included the research on appropriate precursors for the respective components g-C₃N₄ and C₂N, as well as strategies for appropriate structuring. This was targeted by applying precursors which can form supramolecular pre-organized structures. This allows for more control over morphology and atom patterns during the carbonization process. In the first part of this thesis, it was demonstrated how the photocatalytic activity of g-C₃N₄ can be increased by the targeted introduction of defects or surface terminations. This was achieved by using caffeine as a “growth stopping” additive during the formation of the hydrogen-bonded supramolecular precursor complexes. The increased photocatalytic activity of the obtained materials was demonstrated with dye degradation experiments. The second part of this thesis was focused on the synthesis of the second component C₂N. Here, a deep eutectic mixture from hexaketocyclohexane and urea was structured using the biopolymer chitosan. This scaffolding resulted in mesoporous nitrogen-doped carbon monoliths and beads. CO₂- and dye-adsorption experiments with the obtained monolith material revealed a high isosteric heat of CO₂-adsorption and showed the accessibility of the monolithic pore system to larger dye molecules. Furthermore, a novel precursor system for C₂N was explored, based on organic crystals from squaric acid and urea. The respective C₂N carbon with an unusual sheet-like morphology could be synthesized by carbonization of the crystals at 550 °C. With this precursor system, also microporous C₂N carbon with a BET surface area of 865 m²/g was obtained by “salt-templating” with ZnCl₂. Finally, the preparation of a g-C₃N₄/C₂N “all carbon” composite heterojunction was attempted by the self-assembly of g-C₃N₄ and C₂N nanosheets and tested for photocatalytic water splitting. Indeed, the composites revealed high rates of hydrogen evolution when compared to bulk g-C₃N₄. However, the increased catalytic activity was mainly attributed to the high surface area of the nanocomposites rather than to the composition. With regard to alternative composite synthesis ways, first experiments indicated N-Methyl-2-pyrrolidon to be suitable for higher concentrated dispersion of C₂N nanosheets. Eventually, the results obtained in this thesis provide precious synthetic contributions towards the preparation and processing of carbon/nitrogen compounds for energy applications. N2 - Eine interessante Materialklasse für technologische Anwendungen sind Kohlenstoff/Stickstoff-Materialien, die sich durch Ungiftigkeit und Umweltfreundlichkeit bei gleichzeitig interessanten katalytischen Eigenschaften auszeichnen. Die Vielseitigkeit dieser Materialkasse basiert auf der Möglichkeit ihre katalytischen und elektronischen Eigenschaften über Stickstoff-Anteil und –Funktionalitäten zu beeinflussen. Die vorliegende Arbeit fokussierte sich auf Komposite zwischen verschiedenen Kohlenstoff/Stickstoff-Derivaten, für welche aufgrund ihrer unterschiedlichen elektronischen Eigenschaften die Bildung elektronischer Heteroübergänge erwartet werden kann. Solche Komposite sind vielversprechende Materialien für die Erzeugung von Wasserstoff durch die photokatalytische Spaltung von Wasser. Für die eine Komponente des Komposits wurde das graphitische Kohlenstoffnitrid g-C₃N₄ eingesetzt, welches durch seine elektronische Struktur und Stabilität ein geeignetes Material für die photokatalytische Wasserspaltung ist. Für die andere Komponente des Komposits wurde eine erst kürzlich erstmalig beschriebene Kohlenstoff/Stickstoff Verbindung eingesetzt, das Kohlenstoffnitrid C₂N. Für dieses Komposit ist eine im Vergleich zu den einzelnen Komponenten stark erhöhte photokatalytische Aktivität zu erwarten. Neben dem Ziel der Herstellung eines solchen Komposits, fokussierte sich diese Arbeit auch darauf, neue Wege zur Synthese und Strukturierung der einzelnen Komponenten zu entwickeln. Dies sollte über supramolekulare Präkursor-Komplexe erfolgen, mit welchen eine erhöhte Einflussnahme auf Karbonisierungsprozesse erlangt werden kann. Im ersten Teil der Arbeit, welcher auf das graphitische Kohlenstoffnitrid g-C₃N₄ fokussiert war, wurde gezeigt wie die photokatalytische Aktivität dieser Komponente durch den gezielten Einbau von Defekten erhöht werden kann. Dies wurde über einen durch Koffein modifizierten supramolekularen Komplex als Präkursor erreicht. Die erhöhte photokatalytische Aktivität wurde über Farbstoff-Zersetzung nachgewiesen. Der zweite Teil der Arbeit war auf die Herstellung und Strukturierung der neuartigen Verbindung C₂N fokussiert. Hier wurde gezeigt, wie eine eutektische Mischung zwischen Hexaketocyclohexan und Harnstoff als C₂N-Präkursor mit dem Polysaccharid Chitosan strukturiert werden kann. Hierbei wurden poröse Stickstoffhaltige Kohlenstoff-Monolithen und -Perlen erhalten, die eine hohe Adsorptionswärme für die CO₂-Adsorption zeigten. Weiterhin wurde ein neuartiger Präkursor für C₂N vorgestellt, eine organisch-kristalline Verbindung zwischen Quadratsäure und Harnstoff. Durch Karbonisation dieser Verbindung bei 550 °C wurde ein Material mit einer Zusammensetzung von C₂N und einer ungewöhnlichen, schichtartigen Morphologie erhalten. Über eine eutektische Salzschmelze mit Zinkchlorid, konnte mit diesem Präkursor-System auch mikroporöser C₂N-Kohlenstoff mit einer BET-Oberfläche von 865 m²/g hergestellt werden. Im letzten Teil dieser Arbeit wurde die Herstellung des g-C₃N₄/C₂N-Komposits versucht, über die Selbstassemblierung von kolloidal dispergierten g-C₃N₄- und C₂N-Nanopartikeln. Die Nanopartikel wurden über Ultraschall-Behandlungen von Dispersionen dieser Komponenten hergestellt. Die erhaltenen Komposite zeigten eine hohe Aktivität zur photokatalytischen Wasserspaltung, wobei dies eher auf die hohe Oberfläche der Nanopartikel als auf ihre Zusammensetzung zurückgeführt wurde. Im Hinblick auf mögliche Alternativen zur Kompositherstellung, wurden erste Experimente zu höher konzentrierten kolloidalen Dispersionen von C₂N in dem organischen Lösungsmittel N-Methyl-2-pyrrolidon durchgeführt. Zusammenfassend, die Ergebnisse die in dieser Arbeit erhalten wurden, liefern einen wertvollen Beitrag zur Synthese und Strukturierung von Kohlenstoff/Stickstoff-Materialien sowie deren Anwendungen im Bereich alternative Energien. KW - carbon nitrides KW - supramolecular chemistry KW - porous materials KW - composite materials KW - photocatalysis KW - Kohlenstoffnitride KW - supramolekulare Chemie KW - poröse Materialien KW - Komposite KW - Photokatalyse Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-398855 ER - TY - THES A1 - Lorente Sánchez, Alejandro Jose T1 - Synthesis of side-chain polystyrenes for all organic solution processed OLEDs T1 - Synthese von Seitenketten-Polystyrolen für lösungsgefertigte OLEDs N2 - In the present work side-chain polystyrenes were synthesized and characterized, in order to be applied in multilayer OLEDs fabricated by solution process techniques. Manufacture of optoelectronic devices by solution process techniques is meant to decrease significantly fabrication cost and allow large scale production of such devices. This dissertation focusses in three series, enveloped in two material classes. The two classes differ to each other in the type of charge transport exhibited, either ambipolar transport or electron transport. All materials were applied in all-organic solution processed green Ir-based devices. In the first part, a series of ambipolar host materials were developed to transport both charge types, holes and electrons, and be applied especially as matrix for green Ir-based emitters. It was possible to increase devices efficacy by modulating the predominant charge transport type. This was achieved by modification of molecules electron transport part with more electron-deficient heterocycles or by extending the delocalization of the LUMO. Efficiencies up to 28.9 cd/A were observed for all-organic solution-process three layer devices. In the second part, suitability of triarylboranes and tetraphenylsilanes as electron transport materials was studied. High triplet energies were obtained, up to 2.95 eV, by rational combination of both molecular structures. Although the combination of both elements had a low effect in materials electron transport properties, high efficiencies around 24 cd/A were obtained for the series in all-organic solution-processed two layer devices. In the last part, benzene and pyridine were chosen as the series electron-transport motif. By controlling the relative pyridine content (RPC) solubility into methanol was induced for polystyrenes with bulky side-chains. Materials with RPC ≥ 0.5 could be deposited orthogonally from solution without harming underlying layers. From the best of our knowledge, this is the first time such materials are applied in this architecture showing moderate efficiencies around 10 cd/A in all-organic solution processed OLEDs. Overall, the outcome of these studies will actively contribute to the current research on materials for all-solution processed OLEDs. N2 - Organische Licht emittierende Dioden (OLEDs) gelten als die nächste Technologie für Beleuchtungsanwendungen. In letzter Zeit wurden immer mehr kommerzielle Produkte herausgebracht, für die Anwendung in Displays und Beleuchtungssystemen. Doch diese Produkte werden hauptsächlich durch Vakuumabscheidung der organischen Moleküle hergestellt, was hohe Fertigungskosten zur Folge hat. Um die Kosten zu senken, sollten die Geräte über Lösungsverfahren hergestellt werden, was die Produktion durch Drucktechniken ermöglicht. Allerdings gibt es noch einige Herausforderungen bei den Lösungsprozessen, auch bei der Verarbeitung bekannter Materialien, die überwunden werden müssen, wie Rekristallisation oder schlechte Filmbildung. Deshalb sind weitere Materialmodifikationen erforderlich. Ein sehr verbreiteter Ansatz ist die Einarbeitung von Materialien, die im Vakuum verarbeitet werden können, wie Seitenkettenpolymer-Rückgräte. Wir haben in dieser Arbeit drei Reihen von Seitenketten-Polystyrolen synthetisiert und charakterisiert. Die Polymere der ersten Reihe sollten als Hostmaterialien für phosphoreszierende Emitter in der Emissionsschicht dienen. Die Polymere der zweiten und dritten Reihe fungierten als Elektron-Transport-Materialien. Die Polymereigenschaften wurden durch Änderungen der molekularen Struktur der Seitenketten modifiziert. Von allen Materialien wurden dünne Schichten aus Lösung abgeschieden und diese on grünen Ir-basierten OLEDs untersucht. Für alle organischen, aus Lösung gefertigten OLEDs wurden Effizienzen von bis zu 28,9 cd/A erreicht. KW - OLED KW - solution process KW - charge transport KW - polymers KW - OLED KW - Lösungsprozess KW - Ladung Transport KW - Polymere Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-398006 ER - TY - THES A1 - Dippel, Sandor T1 - Development of functional hydrogels for sensor applications T1 - Entwicklung funktionalisierter Hydrogele für Sensor Anwendungen N2 - In this work, a sensor system based on thermoresponsive materials is developed by utilizing a modular approach. By synthesizing three different key monomers containing either a carboxyl, alkene or alkyne end group connected with a spacer to the methacrylic polymerizable unit, a flexible copolymerization strategy has been set up with oligo ethylene glycol methacrylates. This allows to tune the lower critical solution temperature (LCST) of the polymers in aqueous media. The molar masses are variable thanks to the excurse taken in polymerization in ionic liquids thus stretching molar masses from 25 to over 1000 kDa. The systems that were shown shown to be effective in aqueous solution could be immobilized on surfaces by copolymerizing photo crosslinkable units. The immobilized systems were formulated to give different layer thicknesses, swelling ratios and mesh sizes depending on the demand of the coupling reaction. The coupling of detector units or model molecules is approached via reactions of the click chemistry pool, and the reactions are evaluated on their efficiency under those aspects, too. These coupling reactions are followed by surface plasmon resonance spectroscopy (SPR) to judge efficiency. With these tools at hand, Salmonella saccharides could be selectively detected by SPR. Influenza viruses were detected in solution by turbidimetry in solution as well as by a copolymerized solvatochromic dye to track binding via the changes of the polymers’ fluorescence by said binding event. This effect could also be achieved by utilizing the thermoresponsive behavior. Another demonstrator consists of the detection system bound to a quartz surface, thus allowing the virus detection on a solid carrier. The experiments show the great potential of combining the concepts of thermoresponsive materials and click chemistry to develop technically simple sensors for large biomolecules and viruses. N2 - Diese Arbeit befasst sich mit der Entwicklung von Sensorsystemen für biologische Analyten wie Bakterien und Viren. Die Sensoren beruhen auf thermoresponsiven Polymeren und die Entwicklung wird Schritt für Schritt ausgehend von der Monomersynthese dargelegt. Die Grundidee ist es alle Einzelschritte so modular wie möglich zu halten. Die Kopplungseinheiten für die späteren Erkennungsgruppen bestehen aus Carboxyl, Alken und Alkinfunktionalitäten, die zuerst mit einem Ethylenglycolspacer mit variabler Länge verknüpft werden und dann mit der polymerisierbaren Methylmethacrylatgruppe versehen werden. Diese koppelbaren Monomere werden mit Di- oder (Oligoethylenglycol)methacrylaten copolymerisiert. Je nach Verhältnis ist so auch die untere kritische Entmischungstemperatur (LCST) einstellbar. Mit der Erweiterung der Polymerisationstechnik um ionische Flüssigkeiten als Lösemittel lassen sich Molmassen von 25 bis über 1000 kDa einstellen. Um die Polymere funktionell zu erweitern, lassen sich auch benzophenonhaltige Monomere zur Vernetzung oder Immobilisierung copolymerisieren. Naphthalsäureimidhaltige Monomere wiederum dienen als Signaleinheit, da sie durch Verändern der Polarität ihrer Umgebung solvatochrom reagieren. Durch Aufschleudern und UV-Vernetzen lassen sich Gelschichten mit guter Schichtdickenkontrolle herstellen. Dabei sind die Substrate nur auf den jeweiligen Zweck beschränkt. Dank des Baukastenprinzips kann auch die Maschenweite oder der Quellgrad der Gele eingestellt werden. Die Polymere oder Hydrogele werden mit Hilfe von effizienten Reaktionen swe sogenannten „Click Chemie“ umgesetzt und die Reaktionen werden durchleuchtet, ob sie diesen Ansprüchen gerecht werden. Je nach Möglichkeit wird das Anknüpfen mittels Oberflächenplasmonenresonanzspektroskopie(SPR) verfolgt, so wie zum Beispiel die Kopplung eines Phagen-Oberflächenproteins und das selektive Binden eines Membransaccharids des Salmonellen Bakteriums. Influenza Viren werden selektiv mit Hilfe eines Erkennungspeptids gebunden und mit Hilfe von Trübungsspektroskopie bzw. dem thermoresponsiven Verhalten des Trägerpolymers nachgewiesen. Ein weiterer dargelegter Ansatz ist das Nachweisen von geringen Virenkonzentrationen mit Hilfe eines Hydrogels oder von Polymeren in Lösung, die jeweils mit einem solvatochromen Farbstoff ausgestattet sind, der auf die Umgebungsänderung durch den Virus reagiert. Die Experimente zeigen das große Potential von geschickt kombinierten thermoresponsiven Materialien, die mittels Funktionalisierung durch Click-Chemie zu technisch einfachen Nachweissystemen für Biomoleküle und sogar ganze Zellen entwickelt werden können. KW - biosensors KW - polymer synthesis KW - lower critical solution temperature KW - surface modification KW - smart materials KW - Biosensoren KW - Polymersynthese KW - untere kritische Entmischungstemperatur KW - schaltbare Materialien Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-398252 ER - TY - THES A1 - Pavashe, Prashant T1 - Synthesis and transformations of 2-thiocarbohydrates T1 - Synthese und Transformationen von 2-Thiokohlenhydraten BT - a practical approach for functionalization of thiosugars BT - ein Praktischer Zugang zur Funktionalisierung von Thiozuckern N2 - I. Ceric ammonium nitrate (CAN) mediated thiocyanate radical additions to glycals In this dissertation, a facile entry was developed for the synthesis of 2-thiocarbohydrates and their transformations. Initially, CAN mediated thiocyanation of carbohydrates was carried out to obtain the basic building blocks (2-thiocyanates) for the entire studies. Subsequently, 2-thiocyanates were reduced to the corresponding thiols using appropriate reagents and reaction conditions. The screening of substrates, stereochemical outcome and the reaction mechanism are discussed briefly (Scheme I). Scheme I. Synthesis of the 2-thiocyanates II and reductions to 2-thiols III & IV. An interesting mechanism was proposed for the reduction of 2-thiocyanates II to 2-thiols III via formation of a disulfide intermediate. The water soluble free thiols IV were obtained by cleaving the thiocyanate and benzyl groups in a single step. In the subsequent part of studies, the synthetic potential of the 2-thiols was successfully expanded by simple synthetic transformations. II. Transformations of the 2-thiocarbohydrates The 2-thiols were utilized for convenient transformations including sulfa-Michael additions, nucleophilic substitutions, oxidation to disulfides and functionalization at the anomeric position. The diverse functionalizations of the carbohydrates at the C-2 position by means of the sulfur linkage are the highlighting feature of these studies. Thus, it creates an opportunity to expand the utility of 2-thiocarbohydrates for biological studies. Reagents and conditions: a) I2, pyridine, THF, rt, 15 min; b) K2CO3, MeCN, rt, 1 h; c) MeI, K2CO3, DMF, 0 °C, 5 min; d) Ac2O, H2SO4 (1 drop), rt, 10 min; e) CAN, MeCN/H2O, NH4SCN, rt, 1 h; f) NaN3, ZnBr2, iPrOH/H2O, reflux, 15 h; g) NaOH (1 M), TBAI, benzene, rt, 2 h; h) ZnCl2, CHCl3, reflux, 3 h. Scheme II. Functionalization of 2-thiocarbohydrates. These transformations have enhanced the synthetic value of 2-thiocarbohydrates for the preparative scale. Worth to mention is the Lewis acid catalyzed replacement of the methoxy group by other nucleophiles and the synthesis of the (2→1) thiodisaccharides, which were obtained with complete β-selectivity. Additionally, for the first time, the carbohydrate linked thiotetrazole was synthesized by a (3 + 2) cycloaddition approach at the C-2 position. III. Synthesis of thiodisaccharides by thiol-ene coupling. In the final part of studies, the synthesis of thiodisaccharides by a classical photoinduced thiol-ene coupling was successfully achieved. Reagents and conditions: 2,2-Dimethoxy-2-phenylacetophenone (DPAP), CH2Cl2/EtOH, hv, rt. Scheme III. Thiol-ene coupling between 2-thiols and exo-glycals. During the course of investigations, it was found that the steric hindrance plays an important role in the addition of bulky thiols to endo-glycals. Thus, we successfully screened the suitable substrates for addition of various thiols to sterically less hindered alkenes (Scheme III). The photochemical addition of 2-thiols to three different exo-glycals delivered excellent regio- and diastereoselectivities as well as yields, which underlines the synthetic potential of this convenient methodology. N2 - I. Cerammoniumnitrat (CAN) vermittelte Thiocyanat Radikaladditionen an Glycale In dieser Dissertation wurde ein einfacher synthetischer Zugang zu 2-Thiokohlenhydraten und dessen Transformationsprodukten entwickelt. Zu Beginn wurden CAN vermittelte Funktionalisierungen von Kohlenhydraten mit Thiocyanat durchgeführt, um die notwendigen Ausgangsverbindungen (2-Thiocyanate) für die weiteren Studien zu erhalten. Im Folgenden wurden diese 2-Thiocyanate mit entsprechenden Reagenzien unter geeigneten Reduktionsbedingungen zu den Thiolen reduziert. Das Screening der Substrate, der stereochemische Verlauf und der Reaktionsmechanismus wird kurz diskutiert (Schema I). Schema I. Synthese der 2-Thiocyanate II und Reduktionen zu den 2-Thiolen III & IV. Es wurde ein interessanter Mechanismus für die Reduktion der 2-Thiocyanate II zu den 2-Thiolen III via Bildung von Disulfid-Zwischenstufen vorgeschlagen. Die wasserlöslichen freien Thiole IV wurden durch Spaltung der Thiocyanat- und Benzylgruppen in einem Einzelschritt freigesetzt. Im darauf folgenden Teil der Arbeit wurde das synthetische Potenzial der 2-Tiole erfolgreich durch einfache synthetische Transformationen erweitert. II. Transformationen der 2-Thiokohlenhydrate Die 2-Thiole wurden für die Ausführung praktischer Transformationen eingesetzt, die Sulfa-Michael Additionen, nukleophile Substitutionen, Oxidationen zu Disulfiden und Funktionalisierungen an der anomeren Position beinhalten. Die mannigfaltigen Funktionalisierungen der Kohlenhydrate an den C-2 Positionen mittels der Schwefel Gruppe ist das hervortretende Merkmal dieser Arbeit. Reagenzien und Reaktionsbedingungen: a) I2, Pyridin, THF, rt, 15 min; b) K2CO3, MeCN, rt, 1 h; c) MeI, K2CO3, DMF, 0 °C, 5 min; d) Ac2O, H2SO4 (1 Tropfen), rt, 10 min; e) CAN, MeCN/H2O, NH4SCN, rt, 1 h; f) NaN3; ZnBr2; iPrOH/H2O, Rückfluss 15 h; g) NaOH (1 M), TBAI, Benzol, rt 2 h; h) ZnCl2, CHCl3, Rückfluss, 3 h. Schema II. Funktionalisierungen von 2-Thiokohlenhydraten Daraus eröffnet sich die Möglichkeit, den Nutzwert von 2-Thiokohlenhydraten auf biologische Studien auszuweiten. Diese Transformationen haben den synthetischen Wert von 2-Thiokohlenhydraten für den präparativen Maßstab gesteigert. Hervorzuheben ist hier der Lewis Säure katalysierte Austausch der Methoxygruppe durch weitere Nukleophile und die Synthese von (2→1) Thiodisacchariden, die mit quantitativer β-Selektivität erhalten wurden. Zusätzlich wurde zum ersten Mal ein Zucker gebundenes Thiotetrazol über eine (3+2) Cycloaddition an der C-2 Position synthetisiert. III. Synthese von Thiodisacchariden durch Thiol-En-Kopplungen Im letzten Teil der Arbeit gelang die Synthese von Thiodisacchariden durch eine klassische Thiol-En-Kopplung. Reagenzien und Reaktionsbedingungen: 2,2-Dimethoxy-2-phenylacetophenone (DPAP), CH2Cl2/EtOH, hv, rt. Schema III. Thiol-En-Kopplungen zwischen 2-Thiolen und exo-Glycalen. Im Verlauf der Untersuchungen wurde aufgezeigt, dass die räumlische Hinderung bei der Addition von sterisch anspruchsvollen 2-Thiolen an endo-Glycale eine wichtige Rolle spielt. Dazu erprobten wir geeignete Substrate zur Addition von 2-Thiolen an sterisch wenig anspruchsvolle Alkene (Schema III). Die photochemische Addition der 2-Thiole an drei verschiedene exo-Glycale lieferte exzellente Regio- und Diastereoselektivitäten und Ausbeuten, was das synthetische Potenzial dieser bequem durchführbaren Methodik unterstreicht. KW - carbohydrates KW - 2-Thiodisaccharides KW - radical reactions KW - Ceric Ammonium Nitrate (CAN) KW - photochemistry KW - Kohlenhydrate KW - 2-Thiodisaccharide KW - Radikalreaktionen KW - Cer Ammonium Nitrat (CAN) KW - Photochemie Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-397739 ER - TY - THES A1 - Olejko, Lydia T1 - Förster resonance energy transfer (FRET)-based nanophotonics using DNA origami structures T1 - Förster-Resonanzenergietransfer (FRET) basierende Nanophotonik auf DNA Origami Strukturen N2 - The field of nanophotonics focuses on the interaction between electromagnetic radiation and matter on the nanometer scale. The elements of nanoscale photonic devices can transfer excitation energy non-radiatively from an excited donor molecule to an acceptor molecule by Förster resonance energy transfer (FRET). The efficiency of this energy transfer is highly dependent on the donor-acceptor distance. Hence, in these nanoscale photonic devices it is of high importance to have a good control over the spatial assembly of used fluorophores. Based on molecular self-assembly processes, various nanostructures can be produced. Here, DNA nanotechnology and especially the DNA origami technique are auspicious self-assembling methods. By using DNA origami nanostructures different fluorophores can be introduced with a high local control to create a variety of nanoscale photonic objects. The applications of such nanostructures range from photonic wires and logic gates for molecular computing to artificial light harvesting systems for artificial photosynthesis. In the present cumulative doctoral thesis, different FRET systems on DNA origami structures have been designed and thoroughly analyzed. Firstly, the formation of guanine (G) quadruplex structures from G rich DNA sequences has been studied based on a two-color FRET system (Fluorescein (FAM)/Cyanine3 (Cy3)). Here, the influences of different cations (Na+ and K+), of the DNA origami structure and of the DNA sequence on the G-quadruplex formation have been analyzed. In this study, an ion-selective K+ sensing scheme based on the G-quadruplex formation on DNA origami structures has been developed. Subsequently, the reversibility of the G-quadruplex formation on DNA origami structures has been evaluated. This has been done for the simple two-color FRET system which has then been advanced to a switchable photonic wire by introducing additional fluorophores (FAM/Cy3/Cyanine5 (Cy5)/IRDye®700). In the last part, the emission intensity of the acceptor molecule (Cy5) in a three-color FRET cascade has been tuned by arranging multiple donor (FAM) and transmitter (Cy3) molecules around the central acceptor molecule. In such artificial light harvesting systems, the excitation energy is absorbed by several donor and transmitter molecules followed by an energy transfer to the acceptor leading to a brighter Cy5 emission. Furthermore, the range of possible excitation wavelengths is extended by using several different fluorophores (FAM/Cy3/Cy5). In this part of the thesis, the light harvesting efficiency (antenna effect) and the FRET efficiency of different donor/transmitter/acceptor assemblies have been analyzed and the artificial light harvesting complex has been optimized in this respect. N2 - Nanotechnologie hat in den letzten Jahrzehnten durch die Herstellung von Materialien mit außergewöhnlichen Eigenschaften für Anwendungen im Bereich der Medizin und Materialwissenschaften immer mehr an Popularität gewonnen. Die Herstellungsmethoden von Nanostrukturen sind weit gefächert. Auch Desoxyribonukleinsäure (DNS bzw. engl. DNA, deoxyribonucleic acid) kann für die Herstellung von Strukturen im Nanometerbereich genutzt werden. Diese sogenannte DNA-Nanotechnologie wurde in den frühen 1980er Jahren von Nadrian C. Seeman begründet. Ungefähr 30 Jahre später wurde eine neue Methodik für die Herstellung von DNA-Nanostrukturen von Paul W. K. Rothemund entwickelt, die er „scaffold DNA origami“ (Gerüst-DNA-Origami) nannte. DNA-Origami-Nanostrukturen können relativ einfach hergestellt werden und eignen sich perfekt für die Anordnung unterschiedlicher Moleküle (zum Beispiel Fluorophore) mit hoher räumlicher Kontrolle und Präzision. Daher können sie als Substrate genutzt werden, um verschiedene Förster-Resonanzenergietransfer (FRET) Systeme zu entwerfen und zu untersuchen. FRET ist ein strahlungsloser Energietransfer, bei dem die Anregungsenergie von einem Donor- auf ein Akzeptor-Molekül übertragen wird. In dieser kumulativen Doktorarbeit wurden verschiedene FRET-Systeme auf DNA-Origami-Nanostrukturen entwickelt und mithilfe der Fluoreszenzspektroskopie untersucht. Hierbei wurde zuerst die durch einwertige Kationen (Kalium oder Natrium) induzierte Guanin-Quadruplex-Faltung von freier Telomer-DNA und Telomer-DNA auf DNA-Origami-Strukturen mittels FRET analysiert. Diese Untersuchungen haben gezeigt, dass die freie umgedrehte menschliche Telomer-Sequenz (RevHumTel, 5'-(GGG ATT)4) generell sensitiver auf K+ als auf Na+ reagiert. Durch die Immobilisierung der Telomer-DNA auf DNA-Origami-Strukturen kann eine vollständige Selektivität für K+ erreicht werden. Interessanterweise wird die Ionenselektivität aufgehoben, wenn die menschliche Telomer-Sequenz (HumTel, 5'-(TTA GGG)4) verwendet wird. Basierend auf der G-Quadruplex-Faltung konnten schaltbare FRET-Systeme entwickelt werden, da sich die G-Quadruplexe wieder entfalten, wenn die Kationen mithilfe von zum Beispiel Kryptanden entfernt werden. In den hier untersuchten FRET-Systemen konnte zwischen hoher FRET-Effizienz (gefalteter G-Quadruplex) und niedriger FRET-Effizienz (entfalteter DNA Einzelstrang) durch Zugabe KCl bzw. cryptand gewechselt werden. Da sich DNA-Origami-Strukturen recht einfach modifizieren lassen, wurde das ursprüngliche zwei-Farben-FRET-System durch Hinzufügen eines weiteren etwas rotverschobenen Farbstoffes erweitert (drei-Farben-FRET-Kaskade). Schließlich konnte ein schaltbarer photonischer Draht durch Einfügen eines vierten Farbstoffes entwickelt werden. Die Emissionsintensität des finalen Akzeptors ist in einer einfachen drei-Farben-FRET-Kaskade (ein Donor, ein Transmitter und ein Akzeptor) verhältnismäßig gering und kann durch das Anordnen von mehreren Donor- und Transmitter-Molekülen um ein zentrales Akzeptor-Molekül herum stark erhöht werden. In diesen sogenannten künstlichen Lichtsammelkomplexen absorbieren die Donor-Moleküle das Anregungslicht und übertragen dieses über mehrere FRET-Stufen zum Akzeptor-Molekül. Dadurch wird der Wellenlängenbereich der elektromagnetischen Strahlung, welcher vom Akzeptor absorbiert werden kann, vergrößert und die Emissionsintensität des Akzeptors verstärkt. In diesem Teil der Arbeit wurde die Anzahl der Farbstoffe und die Anordnung dieser unterschiedlichen Farbstoffe variiert und die Lichtsammeleffizienz und FRET-Effizienz bestimmt. Hierbei wurden diese Parameter optimiert und aufgrund der gefundenen Ergebnisse konnten Design-Regeln für solche künstlichen Lichtsammelkomplexe aufgestellt werden. KW - DNA origami KW - FRET KW - Förster resonance energy transfer KW - DNA Origami KW - FRET KW - Förster-Resonanzenergietransfer Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-396747 ER - TY - THES A1 - Vacogne, Charlotte D. T1 - New synthetic routes towards well-defined polypeptides, morphologies and hydrogels T1 - Neue Syntheserouten zu wohldefinierten Polypeptiden, Morphologien und Hydrogelen N2 - Proteins are natural polypeptides produced by cells; they can be found in both animals and plants, and possess a variety of functions. One of these functions is to provide structural support to the surrounding cells and tissues. For example, collagen (which is found in skin, cartilage, tendons and bones) and keratin (which is found in hair and nails) are structural proteins. When a tissue is damaged, however, the supporting matrix formed by structural proteins cannot always spontaneously regenerate. Tailor-made synthetic polypeptides can be used to help heal and restore tissue formation. Synthetic polypeptides are typically synthesized by the so-called ring opening polymerization (ROP) of α-amino acid N-carboxyanhydrides (NCA). Such synthetic polypeptides are generally non-sequence-controlled and thus less complex than proteins. As such, synthetic polypeptides are rarely as efficient as proteins in their ability to self-assemble and form hierarchical or structural supramolecular assemblies in water, and thus, often require rational designing. In this doctoral work, two types of amino acids, γ-benzyl-L/D-glutamate (BLG / BDG) and allylglycine (AG), were selected to synthesize a series of (co)polypeptides of different compositions and molar masses. A new and versatile synthetic route to prepare polypeptides was developed, and its mechanism and kinetics were investigated. The polypeptide properties were thoroughly studied and new materials were developed from them. In particular, these polypeptides were able to aggregate (or self-assemble) in solution into microscopic fibres, very similar to those formed by collagen. By doing so, they formed robust physical networks and organogels which could be processed into high water-content, pH-responsive hydrogels. Particles with highly regular and chiral spiral morphologies were also obtained by emulsifying these polypeptides. Such polypeptides and the materials derived from them are, therefore, promising candidates for biomedical applications. N2 - Proteine, auch Polypeptide genannt, sind große Biomoleküle, die aus kleineren Aminosäuren bestehen. Diese sind zu langen Ketten miteinander verbunden, wie die Perlen auf einer Perlenkette. Sie werden in Zellen produziert, können in Tieren und Pflanzen gefunden werden und haben vielfältige Funktionen. Eine dieser Funktionen ist es, die umgebenen Zellen und Gewebe wie ein Gerüst zu stützen. Kollagen (welches in Haut, Knorpel, Sehnen und Knochen zu finden ist) und Keratin (welches in Haaren und Nägeln vorkommt) gehören zu diesen Strukturproteinen. Jedoch wenn ein Gewebe beschädigt ist, beispielsweise als Folge eines Unfalls, kann sich das Grundgerüst aus diesen Strukturproteinen manchmal nicht mehr selbst regenerieren. Maßgefertigte synthetische Polypeptide, können dafür verwendet werden, die Heilung und Wiederherstellung des Gewebes zu Unterstützen. Diese Polypeptide werden mit einer Reihe an chemischen Reaktionen synthetisiert, welche hauptsächlich darauf abzielen Aminosäuren miteinander zu verknüpfen. Synthetische Polypeptide sind weniger Komplex als die von Zellen hergestellten, natürlichen Polypeptide (Proteine). Während in den natürlichen Polypeptiden die Aminosäuren in einer von der DNA definierten Reihenfolge, welche als Sequenz bezeichnet wird, angeordnet sind, sind sie in synthetischen Polypeptiden zumeist zufällig verteilt. Die Konsequenz daraus ist, dass synthetische Polypeptide nicht immer so Leistungsfähig sind wie natürliche Proteine und ein durchdachtes Design benötigen. Zwei Aminosäuren wurden in dieser Dissertation sorgfältig ausgewählt und verwendet um eine Serie an Polypeptiden mit unterschiedlicher Zusammensetzung und Länge zu synthetisieren. Ein neuer und vielseitiger Syntheseweg wurde ebenfalls entwickelt und der zugrundeliegende Mechanismus untersucht. Die Polypeptide wurden gründlich analysiert und neue Materialien wurden aus ihnen entwickelt. In Lösung gebracht formten diese Fasern, ähnlich denen von Kollagen, welche sich wiederum zu robusten Netzwerken anordneten. Aus diesen Netzwerken ließen sich Hydrogele herstellen, welche in der Lage waren große Mengen an Wasser aufzunehmen. Diese Hydrogele wiederum stellen vielversprechende Kandidaten für biomedizinische Anwendungen dar. KW - polymer KW - chemistry KW - biomaterial KW - polymerization KW - kinetics KW - polypeptide KW - colloid KW - gelation KW - hydrogel KW - organogel KW - secondary structure KW - physical KW - NCA KW - N-carboxyanhydride KW - Polymer KW - Chemie KW - Biomaterial KW - Polymerisation KW - Kinetik KW - Polypeptid KW - Kolloid KW - Gelieren KW - Hydrogel KW - Organogel KW - Sekundärstruktur KW - physikalisch KW - NCA KW - N-carboxyanhydrid Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-396366 ER - TY - GEN A1 - Schneider, Ralf A1 - Weigert, Florian A1 - Lesnyak, Vladimir A1 - Leubner, Susanne A1 - Lorenz, Tommy A1 - Behnke, Thomas A1 - Dubavik, Aliaksei A1 - Joswig, Jan-Ole A1 - Resch-Genger, Ute A1 - Gaponik, Nikolai A1 - Eychmüller, Alexander T1 - pH and concentration dependence of the optical properties of thiol-capped CdTe nanocrystals in water and D2O N2 - The optical properties of semiconductor nanocrystals (SC NCs) are largely controlled by their size and surface chemistry, i.e., the chemical composition and thickness of inorganic passivation shells and the chemical nature and number of surface ligands as well as the strength of their bonds to surface atoms. The latter is particularly important for CdTe NCs, which – together with alloyed CdxHg1−xTe – are the only SC NCs that can be prepared in water in high quality without the need for an additional inorganic passivation shell. Aiming at a better understanding of the role of stabilizing ligands for the control of the application-relevant fluorescence features of SC NCs, we assessed the influence of two of the most commonly used monodentate thiol ligands, thioglycolic acid (TGA) and mercaptopropionic acid (MPA), on the colloidal stability, photoluminescence (PL) quantum yield (QY), and PL decay behavior of a set of CdTe NC colloids. As an indirect measure for the strength of the coordinative bond of the ligands to SC NC surface atoms, the influence of the pH (pD) and the concentration on the PL properties of these colloids was examined in water and D2O and compared to the results from previous dilution studies with a set of thiol-capped Cd1−xHgxTe SC NCs in D2O. As a prerequisite for these studies, the number of surface ligands was determined photometrically at different steps of purification after SC NC synthesis with Ellman's test. Our results demonstrate ligand control of the pH-dependent PL of these SC NCs, with MPA-stabilized CdTe NCs being less prone to luminescence quenching than TGA-capped ones. For both types of CdTe colloids, ligand desorption is more pronounced in H2O compared to D2O, underlining also the role of hydrogen bonding and solvent molecules. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 332 Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-395143 ER - TY - GEN A1 - Schürmann, Robin Mathis A1 - Bald, Ilko T1 - Real-time monitoring of plasmon induced dissociative electron transfer to the potential DNA radiosensitizer 8-bromoadenine N2 - The excitation of localized surface plasmons in noble metal nanoparticles (NPs) results in different nanoscale effects such as electric field enhancement, the generation of hot electrons and a temperature increase close to the NP surface. These effects are typically exploited in diverse fields such as surface-enhanced Raman scattering (SERS), NP catalysis and photothermal therapy (PTT). Halogenated nucleobases are applied as radiosensitizers in conventional radiation cancer therapy due to their high reactivity towards secondary electrons. Here, we use SERS to study the transformation of 8-bromoadenine (8BrA) into adenine on the surface of Au and AgNPs upon irradiation with a low-power continuous wave laser at 532, 633 and 785 nm, respectively. The dissociation of 8BrA is ascribed to a hot-electron transfer reaction and the underlying kinetics are carefully explored. The reaction proceeds within seconds or even milliseconds. Similar dissociation reactions might also occur with other electrophilic molecules, which must be considered in the interpretation of respective SERS spectra. Furthermore, we suggest that hot-electron transfer induced dissociation of radiosensitizers such as 8BrA can be applied in the future in PTT to enhance the damage of tumor tissue upon irradiation. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 330 Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-395113 ER - TY - GEN A1 - Behrendt, Felix Nicolas A1 - Schlaad, Helmut T1 - Metathesis polymerization of cystine-based macrocycles N2 - Macrocycles based on L-cystine were synthesized by ring-closing metathesis (RCM) and subsequently polymerized by entropy-driven ring-opening metathesis polymerization (ED-ROMP). Monomer conversion reached ∼80% in equilibrium and the produced poly(ester-amine-disulfide-alkene)s exhibited apparent molar masses (Mappw) of up to 80 kDa and dispersities (Đ) of ∼2. The polymers can be further functionalized with acid anhydrides and degraded by reductive cleavage of the main-chain disulfide. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 329 Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-395080 ER - TY - THES A1 - Titov, Evgenii T1 - Quantum chemistry and surface hopping dynamics of azobenzenes T1 - Quantenchemie und Surface Hopping Dynamik von Azobenzolen BT - free and constrained models BT - freie und eingeschränkte Modelle N2 - This cumulative doctoral dissertation, based on three publications, is devoted to the investigation of several aspects of azobenzene molecular switches, with the aid of computational chemistry. In the first paper, the isomerization rates of a thermal cis → trans isomerization of azobenzenes for species formed upon an integer electron transfer, i.e., with added or removed electron, are calculated from Eyring’s transition state theory and activation energy barriers, computed by means of density functional theory. The obtained results are discussed in connection with an experimental study of the thermal cis → trans isomerization of azobenzene derivatives in the presence of gold nanoparticles, which is demonstrated to be greatly accelerated in comparison to the same isomerization reaction in the absence of nanoparticles. The second paper is concerned with electronically excited states of (i) dimers, composed of two photoswitchable units placed closely side-by-side, as well as (ii) monomers and dimers adsorbed on a silicon cluster. A variety of quantum chemistry methods, capable of calculating molecular electronic absorption spectra, based on density functional and wave function theories, is employed to quantify changes in optical absorption upon dimerization and covalent grafting to a surface. Specifically, the exciton (Davydov) splitting between states of interest is determined from first-principles calculations with the help of natural transition orbital analysis, allowing for insight into the nature of excited states. In the third paper, nonadiabatic molecular dynamics with trajectory surface hopping is applied to model the photoisomerization of azobenzene dimers, (i) for the isolated case (exhibiting the exciton coupling between two molecules) as well as (ii) for the constrained case (providing the van der Waals interaction with environment in addition to the exciton coupling between two monomers). For the latter, the additional azobenzene molecules, surrounding the dimer, are introduced, mimicking a densely packed self-assembled monolayer. From obtained results it is concluded that the isolated dimer is capable of isomerization likewise the monomer, whereas the steric hindrance considerably suppresses trans → cis photoisomerization. Furthermore, the present dissertation comprises the general introduction describing the main features of the azobenzene photoswitch and objectives of this work, theoretical basis of the employed methods, and discussion of gained findings in the light of existing literature. Also, additional results on (i) activation parameters of the thermal cis → trans isomerization of azobenzenes, (ii) an approximate scheme to account for anharmonicity of molecular vibrations in calculation of the activation entropy, as well as (iii) absorption spectra of photoswitch–silicon composites obtained from time-demanding wave function-based methods are presented. N2 - Die vorliegende kumulative Dissertationsschrift basiert auf drei wissenschaftlichen Publikationen und beschäftigt sich mit der computerchemischen Erforschung von molekularen Azobenzol-Schaltern. Die erste Publikation behandelt die thermische cis → trans Isomerisierung von Azobenzol durch einen Elektronentransfer (ein Elektron wird hinzugefügt oder entnommen). Dabei ist die Berechnung der Isomerisierungsrate des Elektronenübergangs nach der Eyringschen Theorie des Übergangszustands unter Einsatz von Aktivierungsenenergien durchgeführt worden. Die Letzteren sind mittels Dichtefunktionaltheorie berechnet worden. Die daraus erhaltenen Ergebnisse sind in Zusammenhang mit experimentellen Untersuchungen der thermische cis → trans Isomerisierung von Azobenzol-Derivaten in Lösung mit und ohne Goldnanopartikeln diskutiert worden. Die thermische Isomerisierung in Anwesenheit der Goldnanopartikeln läuft stark beschleunigt ab. Die zweite Publikation beschäftigt sich mit elektronisch angeregten Zuständen von (i) Dimeren bestehend aus zwei schaltbaren Einheiten, die dicht nebeneinander platziert sind, sowie (ii) Monomeren und Dimeren, die an einen Siliziumcluster adsorbiert sind. Mehrere quantenchemische Methoden basierend auf Dichtefunktionaltheorie und Wellenfunktionstheorie sind zur Berechnung der molekularen elektronischen Absorptionsspektren verwendet worden. Dadurch sind die Änderungen in der optischen Absorption sowohl bei der Dimerisierung, als auch beim kovalenten Anbinden an die Oberfläche bestimmt worden. Dazu ist die exzitonische Aufspaltung (Davydov splitting) zwischen den angeregten Zuständen aus ersten Prinzipien unter Verwendung von speziellen Orbitalen für Übergangszustände (natural transition orbitals) berechnet worden. Dadurch wird ein Einblick in die Natur der angeregten Zuständen erreicht. In der dritten Publikation ist eine nicht-adiabatische Molekulardynamik-Simulation unter Anwendung von trajectory surface hopping durchgeführt worden, um die Photoisomerisirung von Azobenzol-Dimeren zu modellieren. Dabei sind (i) ein isoliertes sowie (ii) ein Dimer in der Monolage betrachtet worden. Es sind die exzitonische Kopplung zwischen den zwei Molekülen, sowie, im Falle der Monolage, auch Van-der-Waals-Wechselwirkungen berücksicht worden. Die Ergebnisse weisen darauf hin, dass ein isoliertes Dimer gleichermaßen isomerisierungsfähig wie ein Monomer ist, wobei die cis → trans Photoisomerisierung durch die sterische Hinderung erheblich unterdrückt wird. Außerdem beinhaltet die darliegende Dissertationsschrift eine allgemeine Einführung, theoretische Grundlagen der verwendeten Methoden und die Diskussion der erhaltenen Ergebnisse mit Blick auf die vorhandene Literatur. Ferner sind zusätzliche Ergebnisse bezüglich der folgenden Aspekte dargestellt: (i) Aktivierungsparameter der thermischen cis → trans Isomerisierung von Azobenzol; (ii) ein Näherungsverfahren zur Berücksichtigung der Anharmonizität von Molekülschwingungen bei Berechnung der Aktivierungsentropie; (iii) Absorptionspektren von Photoschalter-Silizium-Kompositen berechnet mithilfe von zeitaufwändigen Wellenfunktions-basierten Methoden. KW - quantum chemistry KW - surface hopping dynamics KW - azobenzene KW - Quantenchemie KW - Surface Hopping Dynamik KW - Azobenzol Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-394610 ER -