TY - THES A1 - Fischer, Anna T1 - "Reactive hard templating" : from carbon nitrides to metal nitrides T1 - Synthese von Metallnitrid Nanostrukturen durch "Reaktives Hardtemplating" N2 - Nanostructured inorganic materials are routinely synthesized by the use of templates. Depending on the synthesis conditions of the product material, either “soft” or “hard” templates can be applied. For sol-gel processes, usually “soft” templating techniques are employed, while “hard” templates are used for high temperature synthesis pathways. In classical templating approaches, the template has the unique role of structure directing agent, in the sense that it is not participating to the chemical formation of the resulting material. This work investigates a new templating pathway to nanostructured materials, where the template is also a reagent in the formation of the final material. This concept is described as “reactive templating” and opens a synthetic path toward materials which cannot be synthesised on a nanometre scale by classical templating approaches. Metal nitrides are such kind of materials. They are usually produced by the conversion of metals or metal oxides in ammonia flow at high temperature (T > 1000°C), which make the application of classical templating techniques difficult. Graphitic carbon nitride, g-C3N4, despite its fundamental and theoretical importance, is probably one of the most promising materials to complement carbon in material science and many efforts are put in the synthesis of this material. A simple polyaddition/elimination reaction path at high temperature (T = 550°C) allows the polymerisation of cyanamide toward graphitic carbon nitride solids. By hard templating, using nanostructured silica or aluminium oxide as nanotemplates, a variety of nanostructured graphitic carbon nitrides such as nanorods, nanotubes, meso- and macroporous powders could be obtained by nanocasting or nanocoating. Due to the special semi-conducting properties of the graphitic carbon nitride matrix, the nanostructured graphitic carbon nitrides show unexpected catalytic activity for the activation of benzene in Friedel-Crafts type reactions, making this material an interesting metal free catalyst. Furthermore, due to the chemical composition of g-C3N4 and the fact that it is totally decomposed at temperatures between 600°C and 800°C even under inert atmosphere, g-C3N4 was shown to be a good nitrogen donor for the synthesis of early transition metal nitrides at high temperatures. Thus using the nanostructured carbon nitrides as “reactive templates” or “nanoreactors”, various metal nitride nanostructures, such as nanoparticles and porous frameworks could be obtained at high temperature. In this approach the carbon nitride nanostructure played both the role of the nitrogen source and of the exotemplate, imprinting its size and shape to the resulting metal nitride nanostructure. N2 - Die Nanostrukturierung anorganischer Materialien, d.h. die Kontrolle ihrer Form und Größe auf der Nanometerebene durch unterschiedliche Herstellungsverfahren, ist ein sich immer noch erweiterndes Forschungsgebiet. Eine solche Nanostrukturierung wird oft über sogenannte Templatierungsverfahren erreicht: Hier werden Formgeber (Template) mit definierter Morphologie und Größe verwendet und deren Struktur in ein neues Material abgebildet. Templatierungsverfahren können, je nach der Beschaffenheit des Templats, zwischen „weich“ und „hart“ unterschieden werden. Die Begriffe beziehen sich dabei vor allem auf die mechanische und thermische Stabilität der Template, d.h. weiche Template sind vornehmlich organischer, harte Template anorganischer Natur. Wo weiche Template in milden chemischen Verfahren eingesetzt werden, werden harte Template zur Herstellung von Materialien bei Hochtemperaturverfahren verwendet (z. B. poröse Kohlenstoffe). Allgemein dienen Template ausschließlich als Strukturgeber und gehen in keiner Weise in Form einer chemischen Reaktion in die Synthese des gewünschten Materials mit ein. Gegenstand dieser Arbeit ist ein neues Templatierungsverfahren: Die „reaktive Templatierung“. Hierbei wird das Templat - neben seiner Funktion als Strukturgeber – auch als Reagenz für die Synthese des Produktes verwendet. Dieser Synthese-Ansatz öffnet damit neue Wege für die Synthese von nanostrukturierten Materialien, die durch klassische Templatierungsansätze schwer zugänglich sind. Hierzu zählen zum Beispiel die Metallnitride. Üblicherweise werden Metallnitride über die Umsetzung von Metallen oder Metalloxiden in einem Ammoniakstrom bei Mindesttemperaturen von 1000°C gewonnen, was die Anwendung klassischer Templatierungsverfahren beinahe unmöglich macht. Darüber hinaus sind konzentrierte Lauge oder Flusssäure, welche zur Entfernung klassischer harter Template benötigt werden auch Aufschlussmittel für Metallnitride. Graphitisches Kohlenstoffnitrid, g-C3N4, ist wohl eines der meistversprechendsten Materialien um Kohlenstoff in der Materialwissenschaft zu ergänzen. Es wurden bereits viele potentielle Syntheseansätze beschrieben. Eine durch Groenewolt M. erstellte Route ist die thermisch induzierte Polykondensation von Cyanamid (NCNH2) bei 550°C. Da g-C3N4 sich zwischen 600°C und 800°C vollständig in NH3 und CxNyH-Gase zersetzt, ist es eine geeignete Festkörper-Stickstoffquelle für die Herstellung von Metalnitriden. Daher boten sich nanostrukturierte graphitische Kohlenstoffnitride als geeignete reaktive Template oder Nanoreaktoren zur Herstellung von nano-strukturierten Metalnitriden an. Die Templatierung der g-C3N4-Matrix wurde über klassische Harttemplatierungsverfahren erreicht. So konnte eine Vielzahl nano-strukturierter g-C3N4 Materialien synthetisiert werden wie zum Beispiel Nanostäbchen, Nanoröhren, mesoporöse oder makroporöse graphitische Kohlenstoffnitride. Diese haben sich interessanterweise, als metalfreie Katalysatoren für die Aktivierung von Benzol in Friedel-Crafts-Acylierung und -Alkylierung erwiesen. Durch die Infiltrierung der nano-strukturierten g-C3N4-Materialien mit diversen Metal-Präkursoren und nachfolgendem Tempern bei 800°C unter Schutzgas, konnten entsprechende nano-strukturierte Metalnitride, als Nanoabdrücke der vorgegebenen Kohlenstoffnitrid Nanostrukturen hergestellt werden. So konnten TiN, VN, GaN, AlGaN und TiVN Nanopartikel synthetisiert werden, macroporöse TiN/Kohlenstoff Komposite sowie TiN Hohlkugeln. Die so hergestellten Materialien erwiesen sich als effektive basische Katalysatoren für Aldol-Kondensations Reaktionen. KW - Kohlenstoffnitride KW - Metallnitride KW - nano KW - Templatierung KW - Carbonitrides KW - metal nitrides KW - reactive templating KW - confinement KW - nano Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-19777 ER - TY - THES A1 - Nehls, Irene T1 - 13C-NMR-spektroskopische Untersuchungen von Cellulose und Cellulosedervitaten in Lösung BT - Dreizehn-C-NMR-spektroskopische Untersuchungen von Cellulose und Cellulosedervitaten in Lösung Y1 - 1993 ER - TY - THES A1 - Vranic, Marija T1 - 3D Structure of the biomarker hepcidin-25 in its native state T1 - 3D-Struktur des Biomarkers Hepcidin-25 im eigenen nativen Zustand N2 - Hepcidin-25 (Hep-25) plays a crucial role in the control of iron homeostasis. Since the dysfunction of the hepcidin pathway leads to multiple diseases as a result of iron imbalance, hepcidin represents a potential target for the diagnosis and treatment of disorders of iron metabolism. Despite intense research in the last decade targeted at developing a selective immunoassay for iron disorder diagnosis and treatment and better understanding the ferroportin-hepcidin interaction, questions remain. The key to resolving these underlying questions is acquiring exact knowledge of the 3D structure of native Hep-25. Since it was determined that the N-terminus, which is responsible for the bioactivity of Hep-25, contains a small Cu(II)-binding site known as the ATCUN motif, it was assumed that the Hep-25-Cu(II) complex is the native, bioactive form of the hepcidin. This structure has thus far not been elucidated in detail. Owing to the lack of structural information on metal-bound Hep-25, little is known about its possible biological role in iron metabolism. Therefore, this work is focused on structurally characterizing the metal-bound Hep-25 by NMR spectroscopy and molecular dynamics simulations. For the present work, a protocol was developed to prepare and purify properly folded Hep-25 in high quantities. In order to overcome the low solubility of Hep-25 at neutral pH, we introduced the C-terminal DEDEDE solubility tag. The metal binding was investigated through a series of NMR spectroscopic experiments to identify the most affected amino acids that mediate metal coordination. Based on the obtained NMR data, a structural calculation was performed in order to generate a model structure of the Hep-25-Ni(II) complex. The DEDEDE tag was excluded from the structural calculation due to a lack of NMR restraints. The dynamic nature and fast exchange of some of the amide protons with solvent reduced the overall number of NMR restraints needed for a high-quality structure. The NMR data revealed that the 20 Cterminal Hep-25 amino acids experienced no significant conformational changes, compared to published results, as a result of a pH change from pH 3 to pH 7 and metal binding. A 3D model of the Hep-25-Ni(II) complex was constructed from NMR data recorded for the hexapeptideNi(II) complex and Hep-25-DEDEDE-Ni(II) complex in combination with the fixed conformation of 19 C-terminal amino acids. The NMR data of the Hep-25-DEDEDE-Ni(II) complex indicates that the ATCUN motif moves independently from the rest of the structure. The 3D model structure of the metal-bound Hep-25 allows for future works to elucidate hepcidin’s interaction with its receptor ferroportin and should serve as a starting point for the development of antibodies with improved selectivity. N2 - Hepcidin-25 (Hep-25) spielt eine entscheidende Rolle bei der Kontrolle der Eisenhomöostase. Da die Dysfunktion des Hepcidin-Signalweges aufgrund des Eisenungleichgewichts zu mehreren Krankheiten führt, stellt Hepcidin ein potenzielles Ziel für die Diagnose und Behandlung von Störungen des Eisenstoffwechsels dar. Trotz intensiver Forschung in den letzten zehn Jahren, die darauf abzielte, einen selektiven Immunoassay für die Diagnose und Behandlung von Eisenerkrankungen zu entwickeln und die Ferroportin-Hepcidin-Interaktion besser zu verstehen, bleiben Fragen offen. Der Schlüssel zur Lösung dieser grundlegenden Fragen liegt darin, genaue Kenntnisse über die 3D-Struktur des nativen Hep-25 zu erlangen. Da festgestellt wurde, dass der N-Terminus, der für die Bioaktivität von Hep-25 verantwortlich ist, eine kleine Cu(II)-Bindungsstelle enthält, die als ATCUN-Motiv bekannt ist, wurde angenommen, dass der Hep-25- Cu(II)-Komplex die native, bioaktive Form des Hepcidins ist. Diese Struktur ist bisher noch nicht im Detail untersucht worden. Aufgrund fehlender Strukturinformationen über metallgebundenes Hep-25 ist wenig über seine mögliche biologische Rolle im Eisenstoffwechsel bekannt. Daher konzentriert sich diese Arbeit auf die strukturelle Charakterisierung des metallgebundenen Hep-25 mittels NMR-Spektroskopie und Molekulardynamik Simulationen. In der vorliegenden Arbeit wurde ein Protokoll zur Präparation und Reinigung von korrekt gefaltetem Hep-25 in hohen Mengen entwickelt. Um das Problem der geringen Löslichkeit von Hep-25 bei neutralem pH-Wert zu überwinden, haben wir einen C-terminalen DEDEDEDE Löslichkeits-Tag eingeführt. Die Metallbindung wurde durch eine Reihe von NMRspektroskopischen Experimenten untersucht, um die Aminosäuren zu identifizieren, welche an der Metallkoordination beteiligt sind. Basierend auf den erhaltenen NMR-Daten wurde eine Strukturberechnung durchgeführt, um eine Modellstruktur des Hep-25-Ni(II)-Komplexes zu erzeugen. Der DEDEDE-Tag wurde aufgrund fehlender NMR- restraints von der Strukturberechnung ausgeschlossen. Die dynamische Natur und der schnelle Austausch eines Teils der Amid-Protonen mit dem Lösungsmittel reduzierten die Gesamtzahl der NMR- restraints, die für eine hochwertige Struktur erforderlich waren. Die NMR-Daten zeigten, dass die 20 C-terminalen Hep-25-Aminosäuren keine signifikanten Konformationsänderungen als Folge eines pH-Wechsels von pH 3 auf pH 7 und einer Metallbindung erfuhren. Ein 3D-Modell des Hep-25-Ni(II)-Komplexes wurde aus den NMR-Daten des Hexapeptid-Ni(II)-Komplexes und des Hep-25-DEDEDE-Ni(II)-Komplexes in Kombination mit der bekannten Konformation der 19 C-terminalen Aminosäuren erstellt. Die NMR-Daten des Hep-25-DEDEDE-Ni(II)Komplexes zeigen, dass sich das Ni-ATCUN-Motiv unabhängig vom C-Terminus bewegt. Die 3D-Modellstruktur des metallgebundenen Hep-25 ermöglicht es, in Zukunft die Interaktion von Hepcidin mit seinem Rezeptor Ferroportin zu untersuchen und soll als Ausgangspunkt für die Entwicklung von Antikörpern mit verbesserter Selektivität dienen. KW - iron KW - hepcidin KW - peptide KW - metal KW - binding KW - NMR KW - Eisen KW - Hepcidin KW - Peptid KW - Metall KW - Bindung KW - NMR Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-459295 ER - TY - THES A1 - Staude, Lucia T1 - 3R,4R-Hexa-1,5-dien-3,4-diol : ein vielseitiger C2-symmetrischer Baustein in der organischen Synthese Y1 - 2010 CY - Potsdam ER - TY - THES A1 - Villatoro Leal, José Andrés T1 - A combined approach for the analysis of biomolecules using IR-MALDI ion mobility spectrometry and molecular dynamics simulations of peptide ions in the gas phase T1 - Kombinierter Einsatz von IR-MALDI Ionenmobilitätsspektrometrie und Simulationen der Molekulardynamik von Peptidionen in der Gasphase zur Analyse von Biomolekülen N2 - The aim of this doctoral thesis was to establish a technique for the analysis of biomolecules with infrared matrix-assisted laser dispersion (IR-MALDI) ion mobility (IM) spectrometry. The main components of the work were the characterization of the IR-MALDI process, the development and characterization of different ion mobility spectrometers, the use of IR-MALDI-IM spectrometry as a robust, standalone spectrometer and the development of a collision cross-section estimation approach for peptides based on molecular dynamics and thermodynamic reweighting. First, the IR-MALDI source was studied with atmospheric pressure ion mobility spectrometry and shadowgraphy. It consisted of a metal capillary, at the tip of which a self-renewing droplet of analyte solution was met by an IR laser beam. A relationship between peak shape, ion desolvation, diffusion and extraction pulse delay time (pulse delay) was established. First order desolvation kinetics were observed and related to peak broadening by diffusion, both influenced by the pulse delay. The transport mechanisms in IR-MALDI were then studied by relating different laser impact positions on the droplet surface to the corresponding ion mobility spectra. Two different transport mechanisms were determined: phase explosion due to the laser pulse and electrical transport due to delayed ion extraction. The velocity of the ions stemming from the phase explosion was then measured by ion mobility and shadowgraphy at different time scales and distances from the source capillary, showing an initially very high but rapidly decaying velocity. Finally, the anatomy of the dispersion plume was observed in detail with shadowgraphy and general conclusions over the process were drawn. Understanding the IR-MALDI process enabled the optimization of the different IM spectrometers at atmospheric and reduced pressure (AP and RP, respectively). At reduced pressure, both an AP and an RP IR-MALDI source were used. The influence of the pulsed ion extraction parameters (pulse delay, width and amplitude) on peak shape, resolution and area was systematically studied in both AP and RP IM spectrometers and discussed in the context of the IR-MALDI process. Under RP conditions, the influence of the closing field and of the pressure was also examined for both AP and RP sources. For the AP ionization RP IM spectrometer, the influence of the inlet field (IF) in the source region was also examined. All of these studies led to the determination of the optimal analytical parameters as well as to a better understanding of the initial ion cloud anatomy. The analytical performance of the spectrometer was then studied. Limits of detection (LOD) and linear ranges were determined under static and pulsed ion injection conditions and interpreted in the context of the IR-MALDI mechanism. Applications in the separation of simple mixtures were also illustrated, demonstrating good isomer separation capabilities and the advantages of singly charged peaks. The possibility to couple high performance liquid chromatography (HPLC) to IR-MALDI-IM spectrometry was also demonstrated. Finally, the reduced pressure spectrometer was used to study the effect of high reduced field strength on the mobility of polyatomic ions in polyatomic gases. The last focus point was on the study of peptide ions. A dataset obtained with electrospray IM spectrometry was characterized and used for the calibration of a collision cross-section (CCS) determination method based on molecular dynamics (MD) simulations at high temperature. Instead of producing candidate structures which are evaluated one by one, this semi-automated method uses the simulation as a whole to determine a single average collision cross-section value by reweighting the CCS of a few representative structures. The method was compared to the intrinsic size parameter (ISP) method and to experimental results. Additional MD data obtained from the simulations was also used to further analyze the peptides and understand the experimental results, an advantage with regard to the ISP method. Finally, the CCS of peptide ions analyzed by IR-MALDI were also evaluated with both ISP and MD methods and the results compared to experiment, resulting in a first validation of the MD method. Thus, this thesis brings together the soft ionization technique that is IR-MALDI, which produces mostly singly charged peaks, with ion mobility spectrometry, which can distinguish between isomers, and a collision cross-section determination method which also provides structural information on the analyte at hand. N2 - Das Ziel dieser Arbeit war die Zusammenführung der schonende Ionisationsquelle Infrared Matrix-Assisted Laser Dispersion Ionization (IR-MALDI), der Isomer-diskriminierende Ionenmobilitätsspektrometrie und einer neuartigen, auf Molecular Dynamics (MD) Simulationen basierte Berechnungsmethode für Stoßquerschnitte. Der erste Schritt war die Charakterisierung des Flüssigkeitsdispersionsphänomens in IR-MALDI: Zwei verschiedenen Ionentransportmechanismen wurden nachgewiesen und weiter studiert. Die Beziehung zwischen Peakform, Diffusion, Desolvatation und Ionen Extraktionspuls wurde beschrieben. Die Geschwindigkeit der Ionen, die aus dem Dispersionsphänomen stammen, wurde durch Ionenmobilitätsspektrometrie und Shadowgraphie untersucht. Shadowgraphie hat ebenfalls das Verhalten des Dispersionsphänomens erläutert. Eine hohe, schnell abklingende initielle Geschwindigkeit wurde beobachtet. Das Verständnis des IR-MALDI Verfahrens ermöglichte die Optimierung der verschiedenen Ionenmobilität (IM) Spektrometer zum analytischen Zweck. Eine Atmosphärendruck- und zwei Niederdruckvariante von IM Spektrometern wurden mit gepulster Ionenextraktion genutzt. Die Pulsparameter (Pulsverzögerung, ‑breite, -höhe) und verschiedene elektrische Felder an unterschiedlichen Stellen der Spektrometer wurden systematisch variiert. Deren Einfluss auf die Peakauflösung und -fläche wurde untersucht und im Rahmen des IR-MALDI Verfahrens erklärt. Das Verständnis der Anatomie der Anfangsionenwolke wurde ebenfalls durch diese Experimente vertieft. Die analytische Leistungsfähigkeit eines IM-Spektrometers wurde dann untersucht. Nachweisgrenzen und lineare Bereiche wurden bestimmt und in Zusammenhang mit dem IR-MALDI Verfahren interpretiert. Anhand der Trennung von Isomeren und einfachen Mischungen wurde die Anwendung dieser Technik demonstriert und ihre Vorteile, die Detektion einfachgeladener Ionen und die Möglichkeit der HPLC-Kopplung (High Performance Liquid Chromatography), aufgezeigt. Mit dem Niederdruckspektrometer wurde der Einfluss hoher reduzierter Feldstärken auf die Ionenmobilität von polyatomische Ionen in polyatomische Gasen untersucht. Der letzte Schwerpunkt war die Charakterisierung von Peptidionen. Die Peptiden wurden mit Elektrospray (ESI) IM-Spektrometrie vermessen. Der hieraus erhaltene Datensatz diente zur Etablierung einer Stoßquerschnitt Berechnungsmethode mittels MD. Anstatt verschiedener Kandidat-Strukturen und deren Stoßquerschnitte, ergibt diese neuartige semi-automatisierte Methode einen einzigen, gemittelten Stoßquerschnitt. Die MD Methode wurde dann mit einer anderen, einfacheren Methode und mit den experimentellen Ergebnissen von ESI und IR-MALDI-IM Spektrometrie verglichen. Zudem wurde der Zusammenhang zwischen Ladungszustands- und Stoßquerschnittsdifferenzen zwischen den Peptiden untersucht. Weitere Strukturelle Informationen konnten aus den Simulationen extrahiert, und zur Charakterisierung der Peptiden verwendet werden. KW - Ion mobility spectrometry KW - Molecular dynamics KW - IR-MALDI KW - Peptides KW - Shadowgraphy KW - Liquid dispersion KW - Ionenmobilitätsspektrometrie KW - Molekulardynamik KW - Collision cross-section KW - IR-MALDI KW - Peptiden KW - Shadowgraphie KW - Stoßquerschnitt KW - Flüssigkeitszerstäubung Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-419723 ER - TY - THES A1 - Derese, Solomon A1 - Yenesew, Abiy A1 - Midiwo, Jacob O. A1 - Heydenreich, Matthias A1 - Peter, Martin G. T1 - A new isoflavone from stem bark of Millettia dura Y1 - 2003 SN - 1011-3924 ER - TY - THES A1 - Rackwitz, Jenny T1 - A novel approach to study low-energy electron-induced damage to DNA oligonucleotides BT - Influence of DNA sequence, topology and nucleobase modification Y1 - 2016 ER - TY - THES A1 - Gebauer, Denis T1 - A novel view on the early stage of crystallization T1 - Ein Neuartiges Bild der frühen Kristallisationsphase N2 - This thesis provides a novel view on the early stage of crystallization utilizing calcium carbonate as a model system. Calcium carbonate is of great economical, scientific and ecological importance, because it is a major part of water hardness, the most abundant Biomineral and forms huge amounts of geological sediments thus binding large amounts of carbon dioxide. The primary experiments base on the evolution of supersaturation via slow addition of dilute calcium chloride solution into dilute carbonate buffer. The time-dependent measurement of the Ca2+ potential and concurrent pH = constant titration facilitate the calculation of the amount of calcium and carbonate ions bound in pre-nucleation stage clusters, which have never been detected experimentally so far, and in the new phase after nucleation, respectively. Analytical Ultracentrifugation independently proves the existence of pre-nucleation stage clusters, and shows that the clusters forming at pH = 9.00 have a proximately time-averaged size of altogether 70 calcium and carbonate ions. Both experiments show that pre-nucleation stage cluster formation can be described by means of equilibrium thermodynamics. Effectively, the cluster formation equilibrium is physico-chemically characterized by means of a multiple-binding equilibrium of calcium ions to a ‘lattice’ of carbonate ions. The evaluation gives GIBBS standard energy for the formation of calcium/carbonate ion pairs in clusters, which exhibits a maximal value of approximately 17.2 kJ mol^-1 at pH = 9.75 and relates to a minimal binding strength in clusters at this pH-value. Nucleated calcium carbonate particles are amorphous at first and subsequently become crystalline. At high binding strength in clusters, only calcite (the thermodynamically stable polymorph) is finally obtained, while with decreasing binding strength in clusters, vaterite (the thermodynamically least stable polymorph) and presumably aragonite (the thermodynamically intermediate stable polymorph) are obtained additionally. Concurrently, two different solubility products of nucleated amorphous calcium carbonate (ACC) are detected at low binding strength and high binding strength in clusters (ACC I 3.1EE-8 M^2, ACC II 3.8EE-8 M^2), respectively, indicating the precipitation of at least two different ACC species, while the clusters provide the precursor species of ACC. It is proximate that ACC I may relate to calcitic ACC –i.e. ACC exhibiting short range order similar to the long range order of calcite and that ACC II may relate to vateritic ACC, which will subsequently transform into the particular crystalline polymorph as discussed in the literature, respectively. Detailed analysis of nucleated particles forming at minimal binding strength in clusters (pH = 9.75) by means of SEM, TEM, WAXS and light microscopy shows that predominantly vaterite with traces of calcite forms. The crystalline particles of early stages are composed of nano-crystallites of approximately 5 to 10 nm size, respectively, which are aligned in high mutual order as in mesocrystals. The analyses of precipitation at pH = 9.75 in presence of additives –polyacrylic acid (pAA) as a model compound for scale inhibitors and peptides exhibiting calcium carbonate binding affinity as model compounds for crystal modifiers- shows that ACC I and ACC II are precipitated in parallel: pAA stabilizes ACC II particles against crystallization leading to their dissolution for the benefit of crystals that form from ACC I and exclusively calcite is finally obtained. Concurrently, the peptide additives analogously inhibit the formation of calcite and exclusively vaterite is finally obtained in case of one of the peptide additives. These findings show that classical nucleation theory is hardly applicable for the nucleation of calcium carbonate. The metastable system is stabilized remarkably due to cluster formation, while clusters forming by means of equilibrium thermodynamics are the nucleation relevant species and not ions. Most likely, the concept of cluster formation is a common phenomenon occurring during the precipitation of hardly soluble compounds as qualitatively shown for calcium oxalate and calcium phosphate. This finding is important for the fundamental understanding of crystallization and nucleation-inhibition and modification by additives with impact on materials of huge scientific and industrial importance as well as for better understanding of the mass transport in crystallization. It can provide a novel basis for simulation and modelling approaches. New mechanisms of scale formation in Bio- and Geomineralization and also in scale inhibition on the basis of the newly reported reaction channel need to be considered. N2 - Die vorliegende Arbeit zeichnet ein neuartiges Bild der frühen Kristallisationsphase von Calciumcarbonat. Calciumcarbonat hat als Hauptbestandteil der Wasserhärte und als weit verbreitetes Biomineral und Geomineral, das als Sediment in den Ozeanen große Mengen Kohlendioxid bindet, große Bedeutung. Die grundlegenden Experimente basieren auf der sehr langsamen Einstellung von Übersättigung, die durch langsame Zugabe verdünnter Calciumlösung in verdünnten Carbonatpuffer erreicht wird. Zeitabhängige Messung des Ca2+ Potentials bei gleichzeitiger pH = konstant Titration zeigt, dass zeitgemittelt vor der Nukleation gleiche Stoffmengen von Calcium- und Carbonat Ionen in Clustern gebunden sind, die bis jetzt noch nicht experimentell nachgewiesen werden konnten. Analytische Ultrazentrifugation belegt unabhängig die Existenz der Cluster, und es zeigt sich, dass sich die bei pH = 9,00 bildenden Cluster zeitgemittelt aus insgesamt etwa 70 Calcium und Carbonat Ionen bestehen. Die Experimente weisen darauf hin, dass sich die Clusterbildung auf der Grundlage von Gleichgewichtsthermodynamik beschreiben lässt. Ein multiples Bindungsgleichgewichtsmodell ermöglicht die Bestimmung der freien Standard Reaktionsenthalpie für die Bildung von Calcium/Carbonat Ionenpaaren in den Clustern, die ein Maß für die Bindungsstärke in Clustern darstellt. Die Bindungsstärke weist ein Minimum bei pH = 9,75 auf, und es zeigt sich, dass außerhalb dieses Minimums amorphes Calciumcarbonat ausfällt, das sich letztendlich in Calcit (das thermodynamisch stabile Calciumcarbonat Polymorph) umwandelt, während im Minimum und in der Nähe des Minimums amorphes Calciumcarbonat ausfällt, das sich letztendlich hauptsächlich in Vaterit (das thermodynamisch am wenigsten stabile Polymorph), Calcit und möglicherweise Spuren von Aragonit (das Polymorph mittlerer Stabilität) umwandelt. Gleichzeitig treten zwei unterschiedliche Löslichkeitsprodukte für das bei hoher und niedriger Bindungsstärke in Clustern ausgefällte, amorphe Calciumcarbonat auf (ACC I 3,1EE-8 M^2, ACC II 3,8EE-8 M^2). Das zeigt, dass die sich vor der Nukleation bildenden Cluster Vorläuferspezies (Precursor) des ausgefällten, amorphen Calciumcarbonats darstellen, wobei ACC I in der Literatur diskutiertem, calcitischem ACC entsprechen und ACC II vateritischem Calcit entsprechen kann. Eine detaillierte SEM, TEM, WAXS und Lichtmikroskopie Untersuchung der bei minimaler Bindungsstärke in Clustern (pH = 9,75) ausgefällten Partikel zeigt, dass sich hauptsächlich Vaterit mit Spuren von Calcit und möglicherweise Aragonit bildet. Die sich früh bildenden, kristallinen Partikel sind jeweils aus nano-Kristalliten von etwa 5 bis 10 nm Größe aufgebaut, die wie in Mesokristallen eine hohe wechselseitige Ordnung aufweisen. Die Untersuchung der frühen Kristallisation in Gegenwart von Additiven wurde ebenfalls bei minimaler Bindungsstärke in Clustern durchgeführt. Als Additive wurden Polyacrylsäure (PAA) als Beispiel für einen Hemmstoff gegen die Bildung von Verkalkungen und drei Peptide, die Bindungsaffinität zu Calciumcarbonat zeigen, als Beispiel für Kristallisations-Modifikatoren untersucht. Die Analyse zeigt, dass ACC I und ACC II parallel ausfallen; pAA stabilisiert ACC II gegenüber Kristallisation und führt dazu, dass es sich zugunsten von Kristallen, die sich aus ACC I bilden, auflöst, wobei letztendlich reines Calcit erhalten wird. Die Peptide hingegen hemmen die Bildung von Calcit in analoger Weise, wobei in einem Fall letztendlich reines Vaterit entsteht. Die Ergebnisse zeigen, dass die klassische Nukleationstheorie auf die Nukleation von Calciumcarbonat kaum anwendbar ist. Das metastabile System wird durch die Clusterbildung deutlich stabilisiert, und nicht Ionen, sondern Cluster sind die relevanten Spezies in der Nukleation. Wahrscheinlich ist das gefundene Konzept der Clusterbildung ein allgemeines Phänomen, das während der Kristallisation aller schwer löslichen Substanzen auftritt, da es auch für Calciumoxalat und Calciumphosphat qualitativ gezeigt werden konnte. Das Ergebnis ist wichtig für das fundamentale Verständnis der Nukleation, von Nukleationshemmung und der Modifikation von Kristallen mit Auswirkungen auf Materialen von großer industrieller und auch wissenschaftlicher Bedeutung. Ferner gibt es einen Hinweis, wie Masse während der Kristallisation –auch in Lebewesen transportiert werden kann und es kann einen neuen Ansatz für Kristallisationssimulationen liefern. Auf der Basis dieses neuartigen Reaktionskanals müssen neue Kristallisations-Mechanismen in Bio- und Geomineralization in Betracht gezogen werden. KW - Calciumcarbonat KW - Kristallisation KW - Nukleation KW - Cluster KW - Additive KW - calcium carbonate KW - crystallization KW - nucleation KW - clusters KW - additives Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-19818 ER - TY - THES A1 - Kroßner, Thomas T1 - Ab-initio-Untersuchung der Potentialhyperflächen und des spektroskopischen Verhaltens des Fluoroformylradikals FCO Y1 - 1995 ER - TY - THES A1 - Jehannin, Marie T1 - About the role of physico-chemical properties and hydrodynamics on the progress of a precipitation reaction T1 - Über die Rolle physikalisch-chemischer Eigenschaften und Hydrodynamiken auf den Fortschritt einer Fällungsreaktion BT - the case of cerium oxalate particles produced during coalescence of drops BT - Ceroxalat-Partikel, entstanden während der Koaleszenz von Tropfen N2 - The size and morphology control of precipitated solid particles is a major economic issue for numerous industries. For instance, it is interesting for the nuclear industry, concerning the recovery of radioactive species from used nuclear fuel. The precipitates features, which are a key parameter from the post-precipitate processing, depend on the process local mixing conditions. So far, the relationship between precipitation features and hydrodynamic conditions have not been investigated. In this study, a new experimental configuration consisting of coalescing drops is set to investigate the link between reactive crystallization and hydrodynamics. Two configurations of aqueous drops are examined. The first one corresponds to high contact angle drops (>90°) in oil, as a model system for flowing drops, the second one correspond to sessile drops in air with low contact angle (<25°). In both cases, one reactive is dissolved in each drop, namely oxalic acid and cerium nitrate. When both drops get into contact, they may coalesce; the dissolved species mix and react to produce insoluble cerium oxalate. The precipitates features and effect on hydrodynamics are investigated depending on the solvent. In the case of sessile drops in air, the surface tension difference between the drops generates a gradient which induces a Marangoni flow from the low surface tension drop over the high surface tension drop. By setting the surface tension difference between the two drops and thus the Marangoni flow, the hydrodynamics conditions during the drop coalescence could be modified. Diols/water mixtures are used as solvent, in order to fix the surface tension difference between the liquids of both drops regardless from the reactant concentration. More precisely, the used diols, 1,2-propanediol and 1,3-propanediol, are isomer with identical density and close viscosity. By keeping the water volume fraction constant and playing with the 1,2-propanediol and 1,3-propanediol volume fractions of the solvents, the mixtures surface tensions differ up to 10 mN/m for identical/constant reactant concentration, density and viscosity. 3 precipitation behaviors were identified for the coalescence of water/diols/recatants drops depending on the oxalic excess. The corresponding precipitates patterns are visualized by optical microscopy and the precipitates are characterized by confocal microscopy SEM, XRD and SAXS measurements. In the intermediate oxalic excess regime, formation of periodic patterns can be observed. These patterns consist in alternating cerium oxalate precipitates with distinct morphologies, namely needles and “microflowers”. Such periodic fringes can be explained by a feedback mechanism between convection, reaction and the diffusion. N2 - Die Kontrolle der Morphologie und Größe fester durch Fällung erzeugter Partikel ist eine wichtige Herausforderung in Industrie und Forschung. Insbesondere gilt dies für die Wiederaufbereitung verbrauchter Brennstäber in der Atomindustrie. Die Eigenschaften der Ausfällungen hängen von den Mischbedingungen der Flüssigkeiten in den Prozessen ab. Dennoch sind die Beziehungen zwischen den physischen Charakteristiken der erzeugten Partikeln und den hydrodynamischen Bedingungen ungewiss. In dieser Arbeit werden Zwei-Tropfen-Koalezenz-Experiment genutzt, um die Verbindungen zwischen Hydrodynamik und Fällungsreaktion besser zu verstehen. Zwei Konfigurationen von ruhenden wässrigen Tropfen wurden untersucht: Zum einen Tropfen mit hohem Kontaktwinkel (> 90°) in Öl und zum anderen Tropfen mit kleinem Kontaktwinkel (< 25°) in Luft. In beiden Fällen wurde Oxalsäure und Ceriumnitrat jeweils in einem Tropfen gelöst. Wenn beide Tropfen einander in Kontakt treten, können sie sich vereinigen. Dabei mischen sich die Reagenzien und erzeugen Ceriumoxalat. In Abhängigkeit von Lösungsmitteln werden die Eigenschaften der Fällung sowie ihr Einfluss auf die Hydrodynamik untersucht. In Experimenten Tropfen in Luft ist es außerdem möglich, mittels Wasser/Diol-Mischungen den Oberflächenspannungsgradienten zwischen beiden Tropfenflüssigkeiten zu ändern. Damit ist es möglich den resultierenden Marangoni-Fluss zu kontrollieren. So werden die hydrodynamischen Bedingungen unabhängig von dem Oxalsäureüberschuss verwirklicht. In diesem Fall werden drei Fällungsverhalten abhängig er Oxalsäure-Konzentration beobachtet. Das Zwischenverhalten zeigt überraschende periodische Strukturen, welche verschiedenen Morphologien bilden, nämlich Nägeln und „Microflower“. Die Strukturen wurden über Optische Mikroskopie Identifiziert und charakterisiert mit Hilfe von Konfokaler Mikroskopie, SEM, XRD und SAXS. Die Entstehung solcher Strukturen könnte durch eine Konvektion- Diffusion- Reaktion-Rückkopplung erklärt werden. N2 - Réussir à contrôler la morphologie et la taille de particules solides obtenues par précipitation est un enjeu industriel majeur. C’est notamment le cas dans l’industrie nucléaire pour le recyclage du combustible usé. Les caractéristiques des précipités sont liées aux conditions de mélange des phases liquides dans les procédés. Les corrélations entre les paramètres physiques des particules obtenues et les conditions hydrodynamiques n’ont pas été examinées jusqu’à présent. Dans cette étude, des systèmes expérimentaux originaux, basés sur la coalescence de deux gouttes, sont utilisés afin de mieux comprendre les liens entre hydrodynamique et réaction de précipitation. Deux configurations de gouttes aqueuses ont été investiguées, la première consiste en deux goutes posées à fort angle de contact (>90°) dans l’huile, il s’agit d’un système modèle pour les gouttes en émulsion, la second configuration correspond à deux gouttes posées à faible angle de contact (>25°) dans l’air. Dans chaque cas, une espèce réactive est dissoute dans chaque goutte, à savoir de l’acide oxalique ou du nitrate de cérium dans la seconde. Lorsque les deux gouttes se touchent, elles peuvent éventuellement coalescer, alors les espèces chimiques se mélangent et réagissent pour produire un précipité d’oxalate de cérium. Les caractéristiques de ce précipité et ses effets sur l’hydrodynamique sont examinés en fonction du solvant utilisé. De plus, dans le cas des gouttes posées sur une surface de silice dans l’air, une différence de tension de surface entre deux gouttes crée un gradient qui génère un flux de Marangoni dirigé de la goutte de faible tension de surface au-dessus de la goutte de forte tension de surface. En jouant sur la différence de tension de surface entre les deux gouttes, et ainsi sur le flux de Marangoni, il est possible de modifier les conditions hydrodynamiques lors de la coalescence des gouttes. Des mélanges eau/diols ont été utilisés comme solvant afin de pouvoir modifier la différence de tension de surface entre les liquides des deux gouttes indépendamment de leur concentration en réactif. Les diols utilisés, le 1,2-propanediol et le 1,3-propanediol sont des isomères, ils sont la même densité, des viscosités semblables mais des tensions de surface différentes. En fixant la fraction volumique d’eau dans le solvant, et en jouant sur les fractions volumiques de chaque diols, il est possible de contrôler la tension de surface des mélanges sur une gamme de 10 mN/m pour une concentration en réactifs donnée, et en conservant la densité et viscosité des solvants. Trois régimes de précipitation ont été identifiés dans le cas de la coalescence de gouttes d’eau/diols/réactifs en fonction de l’excès oxalique. Les motifs de précipitation en découlant ont été imagés par microscopie optique et les différents précipités ont été caractérisés à l’aide de microscopie confocale, MEB, DRX et SAXS. Le régime intermédiaire présente des motifs périodiques surprenants. Ces motifs correspondent à des domaines nettement délimités d’oxalate de cérium de différentes morphologies, à savoir des aiguilles et des « microflowers ». L’obtention de tels motifs peut s’expliquer par un mécanisme de rétroaction entre convection, réaction et diffusion. KW - Marangoni flow KW - coalescence KW - periodic pattern KW - oxalic precipitation KW - drop KW - Marangoni-Fluss KW - Koaleszenz KW - Tropfen KW - Fällungsreaktion KW - periodisches Muster KW - Oxalat-Fällung KW - flux de Marangoni KW - coalescence KW - gouttes KW - précipitation KW - motif périodique KW - précipitation oxalique Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-88364 ER - TY - THES A1 - Lemke, Karina T1 - Abtrennung und Charakterisierung von Polyelektrolyt-modifizierten Nanopartikeln T1 - Separation and characterization of polyelectrolyte-modified nanoparticles N2 - Gegenstand der Dissertation ist die größen- und eigenschaftsoptimierte Synthese und Charakterisierung von anorganischen Nanopartikeln in einer geeigneten Polyelektrolytmodifizierten Mikroemulsion. Das Hauptziel bildet dabei die Auswahl einer geeigneten Mikroemulsion, zur Synthese von kleinen, stabilen, reproduzierbaren Nanopartikeln mit besonderen Eigenschaften. Die vorliegende Arbeit wurde in zwei Haupteile gegliedert. Der erste Teil befasst sich mit der Einmischung von unterschiedlichen Polykationen (lineares Poly (diallyldimethylammoniumchlorid) (PDADMAC) und verzweigtes Poly (ethylenimin) (PEI)) in verschiedene, auf unterschiedlichen Tensiden (CTAB - kationisch, SDS - anionisch, SB - zwitterionisch) basierenden, Mikroemulsionssysteme. Dabei zeigt sich, dass das Einmischen der Polykationen in die Wassertröpfchen der Wasser-in-Öl (W/O) Mikroemulsion prinzipiell möglich ist. Der Einfluss der verschiedenen Polykationen auf das Phasenverhalten der W/O Mikroemulsion ist jedoch sehr unterschiedlich. In Gegenwart des kationischen Tensids führen die repulsiven Wechselwirkungen mit den Polykationen zu einer Destabilisierung des Systems, während die ausgeprägten Wechselwirkungen mit dem anionischen Tensid in einer deutlichen Stabilisierung des Systems resultieren. Für das zwitterionische Tensid führen die moderaten Wechselwirkungen mit den Polykationen zu einer partiellen Stabilisierung. Der zweite Teil der Arbeit beschäftigt sich mit dem Einsatz der unterschiedlichen, Polyelektrolyt- modifizierten Mikroemulsionen als Templatphase für die Herstellung verschiedener, anorganischer Nanopartikel. Die CTAB-basierte Mikroemulsion erweist sich dabei als ungeeignet für die Herstellung von CdS Nanopartikeln, da zum einen nur eine geringe Toleranz gegenüber den Reaktanden vorhanden ist (Destabilisierungseffekt) und zum anderen das Partikelwachstum durch den Polyelektrolyt-Tensid-Film nicht ausreichend begrenzt wird. Zudem zeigt sich, dass eine Abtrennung der Partikel aus der Mikroemulsion nicht möglich ist. Die SDS-basierten Mikroemulsionen, erweisen sich als geeignete Templatphase zur Synthese kleiner anorganischer Nanopartikel (3 – 20 nm). Sowohl CdS Quantum Dots, als auch Gold Nanopartikel konnten erfolgreich in der Mikroemulsion synthetisiert werden, wobei das verzweigte PEI einen interessanten Templat-Effekt in der Mikroemulsion hervorruft. Als deutlicher Nachteil der SDS-basierten Mikroemulsionen offenbaren sich die starken Wechselwirkungen zwischen dem Tensid und den Polyelektrolyten während der Aufarbeitung der Nanopartikel aus der Mikroemulsion. Dabei erweist sich die Polyelektrolyt-Tensid-Komplexbildung als hinderlich für die Redispergierung der CdS Quantum Dots in Wasser, so dass Partikelaggregation einsetzt. Die SB-basierten Mikroemulsionen erweisen sich als günstige Templatphase für die Bildung von größen- und eigenschaftenoptimierten Nanopartikeln (< 4 nm), wobei insbesondere eine Modifizierung mit PEI als ideal betrachtet werden kann. In Gegenwart des verzweigten PEI gelang es erstmals ultrakleine, fluoreszierende Gold Cluster (< 2 nm) in einer SB-basierten Mikroemulsion als Templatphase herzustellen. Als besonderer Vorteil der SB-basierten Mikroemulsion zeigen sich die moderaten Wechselwirkungen zwischen dem zwitterionischen Tensid und den Polyelektrolyten, welche eine anschließende Abtrennung der Partikel aus der Mikroemulsion unter Erhalt der Größe und ihrer optischen Eigenschaften ermöglichen. In der redispergierten wässrigen Lösung gelang somit eine Auftrennung der PEI-modifizierten Partikel mit Hilfe der asymmetrischer Fluss Feldflussfraktionierung (aF FFF). Die gebildeten Nanopartikel zeigen interessante optische Eigenschaften und können zum Beispiel erfolgreich zur Modifizierung von Biosensoren eingesetzt werden. N2 - This work is focused on the formation, recovery and characterisation of inorganic nanoparticles in a tailor-made polycation-modified reverse microemulsion. The main aim is the choice of an adequate microemulsion for the synthesis of small, uniform, reproducible nanoparticles with specialn characteristics. The first part is focused on the incorporation of two different polycations, low molecular weight linear poly(diallyldimethylammonium chloride) (PDADMAC) and low molecular weight branched poly(ethyleneimine) (PEI) in different surfactant-based (CTAB – cationic, SDS – anionic, SB - zwitterionic) w/o microemulsions. In principle the incorporation of the polycations in the small water droplets is possible, but the influence of the polycations on the phase behaviour is different. Repulsive interactions induce a destabilisation of the w/o microemulsion for cationic surfactant CTAB, while the distinctive interactions between the anionic surfactant SDS and the polycations induce an extension of the phase range and a considerable stabilisation. In case of zwitterionic surfactant SB a partial destabilisation can be observed, according to the lower interactions with the polycations. The second part is focused on the formation of different, inorganic nanoparticles in these polyelectrolyte-modified reverse microemulsions as a template phase. The CTAB-based microemulsion is not adequate for the formation of CdS nanoparticles, according to the low tolerance towards the reactants (destabilisation effect). Furthermore the particle growth cannot be limited by the surfactant-polycation-film and a recovery of the nanoparticles from the microemulsion is not possible. The results show that the SDS-based quaternary template phase consisting of water, toluene-pentanol (1:1), and the anionic surfactant SDS in presence of PEI or PDADMAC can be successfully used for the synthesis of polymer capped inorganic nanoparticles (3 – 20 nm). CdS quantum dots, as well as gold nanoparticles are successfully synthesised in the microemulsion droplets. Especially PEI acts as a reducing and stabilizing agent and shows an additional, interesting template effect in the microemulsion. Unfortunately a recovery of the nanoparticles without a particle aggregation is not possible due to the strong surfactant polycation interactions, which lead to polycation-surfactant complexes. The SB-based microemulsion can be successfully used as a tailor-made polycation-modifiedreverse microemulsion for the formation of small, uniform nanoparticles (< 4 nm) with special characteristics. Especially a modification with PEI is optimal and for the first time small, fluorescent gold cluster (< 2 nm) can be synthesised in a SB-based microemulsion as template phase. The results show that the electrostatic interactions between the polycation and the surfactant are of high relevance especially in the solvent evaporation and redispersion process. That means only in the case of moderate polycation-surfactant interactions a redispersion of the polymer capped particles without problems of aggregation is possible and the size and characteristics are unchanged in the redispersed solution. By means of asymmetric flow field flow fractionation (af-fff) it becomes possible to separate the two cluster fractions from each other as well as from the nanoparticle fraction with diameter > 5 nm. This opens a way to use the nanoparticles with their interesting, optical characteristics in different new fields of application for example for modification of biosensors. KW - Mikroemulsion KW - Gold Cluster KW - Quantum Dots KW - Feldflussfraktionierung KW - Nanopartikel KW - Microemulsion KW - Gold Cluster KW - Quantum Dots KW - Field Flow Fractionation KW - Nanoparticles Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-68133 ER - TY - THES A1 - Bai, Shuo T1 - Active hydrogels with nanocomposites Y1 - 2010 CY - Potsdam ER - TY - THES A1 - Asfaw, Mesfin T1 - Adhesion of multi-component membbranes and strings Y1 - 2005 CY - Potsdam ER - TY - THES A1 - Klinnert, Silke T1 - Adsorptive Eigenschaften von Bodensubstraten in Abhängigkeit vom anthropogenen Überprägungsgrad Y1 - 1996 ER - TY - THES A1 - Steeples, Elliot T1 - Amino acid-derived imidazolium salts: platform molecules for N-Heterocyclic carbene metal complexes and organosilica materials T1 - Imidazolium-Salze aus Aminosäure: Bausteine für N-Heterozyklische-Carben Metallkomplexe und Organosilicamaterialien N2 - In the interest of producing functional catalysts from sustainable building-blocks, 1, 3-dicarboxylate imidazolium salts derived from amino acids were successfully modified to be suitable as N-Heterocyclic carbene (NHC) ligands within metal complexes. Complexes of Ag(I), Pd(II), and Ir(I) were successfully produced using known procedures using ligands derived from glycine, alanine, β-alanine and phenylalanine. The complexes were characterized in solid state using X-Ray crystallography, which allowed for the steric and electronic comparison of these ligands to well-known NHC ligands within analogous metal complexes. The palladium complexes were tested as catalysts for aqueous-phase Suzuki-Miyaura cross-coupling. Water-solubility could be induced via ester hydrolysis of the N-bound groups in the presence of base. The mono-NHC–Pd complexes were seen to be highly active in the coupling of aryl bromides with phenylboronic acid; the active catalyst of which was determined to be mostly Pd(0) nanoparticles. Kinetic studies determined that reaction proceeds quickly in the coupling of bromoacetophenone, for both pre-hydrolyzed and in-situ hydrolysis catalyst dissolution. The catalyst could also be recycled for an extra run by simply re-using the aqueous layer. The imidazolium salts were also used to produce organosilica hybrid materials. This was attempted via two methods: by post-grafting onto a commercial organosilica, and co-condensation of the corresponding organosilane. The co-condensation technique harbours potential for the production of solid-support catalysts. N2 - Um Katalysatoren aus nachhaltigen Chemikalien herzustellen, wurden 1,3-Dicarbonsäure-Imidazolium-Salze, welche aus Aminosäuren synthetisiert wurden als N-heterozyklische-Carben-Liganden (NHC) in Metallkomplexen modifiziert. Liganden aus Glycin, Alanin, β-Alanin und Phenylalanin wurden wiederum genutzt, um Metallkomplexe aus Silber(I), Palladium(II) und Iridium(I) darzustellen. Alle Komplexverbindungen wurden mit Röntgenkristallographie charakterisiert. Die Palladiumkomplexe wurden als Katalysatoren in der Suzuki-Miyaura Reaktion eingesetzt. Durch zusätzliche Hydrolyse der Ester-Gruppen konnte eine gute Wasserlöslichkeit erreicht werden. Die hohe Aktivität der Mono-NHC–Palladium-Komplexe konnte bei der Kupplung von Arylbromiden mit Phenylboronsäuren aufgezeigt werden. Die aktive Spezies wurde hauptsächlich Pd(0) Nanopartikeln zugeschrieben. Nach erfolgreichem Recycling konnte der Katalysator noch einmal wiederverwendet werden. Die Imidazolium-Salze wurden ebenfalls herangezogen, um Organosilicamaterialien zu synthetisieren. Die Herstellung wurde durch zwei Methoden erreicht. Zum einen durch nachträgliches Aufbringen auf kommerzielle Siliziummaterialien, sowie durch Co-Kondensation auf das entsprechende Organosilan. Diese Co-Kondensation birgt Potential zur Herstellung von festen Trägerkatalysatoren. KW - synthesis KW - Synthese KW - sustainable chemistry KW - nachhaltige Chemie KW - organometallics KW - Metallorganischen KW - water KW - Wasser Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-101861 ER - TY - THES A1 - Zehm, Daniel T1 - Amphiphile Block-Bürstenpolymere : ihre Synthese durch sequentielle Anwendung von CRP-Methoden und ihre Selbstorganisation in ausgewählten Lösungsmitteln Y1 - 2010 CY - Potsdam ER - TY - THES A1 - Krämer, Eckart T1 - Amphiphile Blockcopolymere : lyotropes Phasenverhalten und ihre Nutzung zur Morphosynthese T2 - Berichte aus der Chemie Y1 - 2000 SN - 3-8265-7030-8 SN - 0945-070X PB - Shaker CY - Aachen ER - TY - THES A1 - Oestreich, Sascha T1 - Amphiphile Blockcopolymere : Synthese, Strukturbildung und Anwendung Y1 - 1997 CY - Teltow ER - TY - THES A1 - Kristen, Juliane Ute T1 - Amphiphilic BAB-triblock copolymers bearing fluorocarbon groups : synthesis and self-organization in aqueous media T1 - Amphiphile BAB-Triblockcopolymere mit Fluorcarbon-Gruppen : Synthese und Selbstorganisation in wässrigen Medien N2 - In this work new fluorinated and non-fluorinated mono- and bifunctional trithiocarbonates of the structure Z-C(=S)-S-R and Z-C(=S)-S-R-S-C(=S)-Z were synthesized for the use as chain transfer agents (CTAs) in the RAFT-process. All newly synthesized CTAs were tested for their efficiency to moderate the free radical polymerization process by polymerizing styrene (M3). Besides characterization of the homopolymers by GPC measurements, end- group analysis of the synthesized block copolymers via 1H-, 19F-NMR, and in some cases also UV-vis spectroscopy, were performed attaching suitable fluorinated moieties to the Z- and/or R-groups of the CTAs. Symmetric triblock copolymers of type BAB and non-symmetric fluorine end- capped polymers were accessible using the RAFT process in just two or one polymerization step. In particular, the RAFT-process enabled the controlled polymerization of hydrophilic monomers such as N-isopropylacrylamide (NIPAM) (M1) as well as N-acryloylpyrrolidine (NAP) (M2) for the A-blocks and of the hydrophobic monomers styrene (M3), 2-fluorostyrene (M4), 3-fluorostyrene (M5), 4-fluorostyrene (M6) and 2,3,4,5,6-pentafluorostyrene (M7) for the B-blocks. The properties of the BAB-triblock copolymers were investigated in dilute, concentrated and highly concentrated aqueous solutions using DLS, turbidimetry, 1H- and 19F-NMR, rheology, determination of the CMC, foam height- and surface tension measurements and microscopy. Furthermore, their ability to stabilize emulsions and microemulsions and the wetting behaviour of their aqueous solutions on different substrates was investigated. The behaviour of the fluorine end-functionalized polymers to form micelles was studied applying DLS measurements in diluted organic solution. All investigated BAB-triblock copolymers were able to form micelles and show surface activity at room temperature in dilute aqueous solution. The aqueous solutions displayed moderate foam formation. With different types and concentrations of oils, the formation of emulsions could be detected using a light microscope. A boosting effect in microemulsions could not be found adding BAB-triblock copolymers. At elevated polymer concentrations, the formation of hydrogels was proved applying rheology measurements. N2 - Im Rahmen dieser Arbeit wurden neue fluorierte und unfluorierte mono- und bifunktionelle Trithiocarbonate der Typen Z-C(=S)-S-R und Z-C(=S)-S-R-S-C(=S)-Z zur Anwendung als CTAs (chain- transfer agents) im RAFT-Polymerisationsverfahren hergestellt. Alle CTAs wurden erfolgreich auf ihre Effizienz zur Steuerung des radikalischen Polymerisationsverfahrens hin durch Polymerisation von Styrol (M3) getestet. Neben GPC-Messungen wurden Endgruppenanalysen der synthetisierten Blockcopolymere mittels 1H-, 19F-NMR und in manchen Fällen auch UV-Vis Spektroskopie durchgeführt. Dazu wurden die Z- und/oder R-Gruppen der CTAs mit geeigneten fluorierten Gruppen versehen. Durch Anwendung des RAFT Verfahrens konnten symmetrische Triblockcopolymere vom Typ BAB bzw. mit einer Fluoralkylgruppe endgecappte unsymmetrische Polymere in nur zwei bzw. einem Polymerisationsschritt hergestellt werden. Das RAFT- Polymerisationsverfahren ermöglicht sowohl die Polymerisation hydrophiler Monomere wie N-Isopropylacrylamid (NIPAM) (M1) oder N-Acryloylpyrrolidin (NAP) (M2) für die A-Blöcke als auch der hydropoben Monomere Styrol (M3), 2-Fluorostyrol (M4), 3-Fluorostyrol (M5), 4- Fluorostyrol (M6) und 2,3,4,5,6- Pentafluorostyrol (M7) für die B-Blöcke. Die Eigenschaften der Blockcopolymere in verdünnten, konzentrierten und hochkonzentrierten wässrigen Lösungen wurden mittels DLS, Trübungsphotometrie, 1H- und 19F-NMR, Rheologie, CMC- sowie Schaumhöhen- und Oberflächenspannungsmessungen und Lichtmikroskopie untersucht. Weiterhin wurden ihre Eigenschaften als Emulgatoren und in Mikroemulsion untersucht. Das Micellbildungsverhalten der hydrophob endfunktionalisierten Polymere wurde mittels DLS Messungen in verdünnter organischer Lösung untersucht. Alle untersuchten BAB-Triblöcke bildeten Micellen und zeigten Oberflächenaktivität bei Raumtemperatur in verdünnter, wässriger Lösung. Weiterhin zeigen die wässrigen Lösungen der Polymere mäßige Schaumbildung. Mit verschiedenen Öltypen und Ölkonzentrationen wurden Emulsionen bzw. Mikroemulsionen gebildet. In Mikroemulsion wurde durch Zugabe von BAB-Triblockopolymeren kein Boosting-Effekt erzielt werden. Bei Untersuchung höherer Polymerkonzentrationen wurde die Bildung von Hydrogelen mittels rheologischer Messungen nachgewiesen. Verschiedene Substrate konnten benetzt werden. Die hydrophob endgecappten Polymere bilden in verdünnter organischer Lösung Micellen, die mittels DLS untersucht wurden, und zeigen somit Tensidverhalten in nichtwässriger Lösung. KW - Fluorierte Blockcopolymere KW - RAFT KW - Rheologie KW - Tenside KW - Gele KW - wässrige Systeme KW - thermisch schaltbare Polymere KW - fluorinated Blockcopolymers KW - RAFT-Polymerisation KW - rheology KW - surfactants KW - gels KW - aqueous systems KW - thermosensitive polymers Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-61782 ER - TY - THES A1 - Stocco, Antonio T1 - Amphiphilic block copolymers at the liquid-fluid interface, invesrigated by evanescent light scattering and ellipsometry Y1 - 2007 CY - Potsdam ER -