TY - GEN A1 - Abbas, Ioana M. A1 - Vranic, Marija A1 - Hoffmann, Holger A1 - El-Khatib, Ahmed H. A1 - Montes-Bayón, María A1 - Möller, Heiko Michael A1 - Weller, Michael G. T1 - Investigations of the Copper Peptide Hepcidin-25 by LC-MS/MS and NMR⁺ T2 - Postprints der Universität Potsdam Mathematisch-Naturwissenschaftliche Reihe N2 - Hepcidin-25 was identified as themain iron regulator in the human body, and it by binds to the sole iron-exporter ferroportin. Studies showed that the N-terminus of hepcidin is responsible for this interaction, the same N-terminus that encompasses a small copper(II) binding site known as the ATCUN (amino-terminal Cu(II)- and Ni(II)-binding) motif. Interestingly, this copper-binding property is largely ignored in most papers dealing with hepcidin-25. In this context, detailed investigations of the complex formed between hepcidin-25 and copper could reveal insight into its biological role. The present work focuses on metal-bound hepcidin-25 that can be considered the biologically active form. The first part is devoted to the reversed-phase chromatographic separation of copper-bound and copper-free hepcidin-25 achieved by applying basic mobile phases containing 0.1% ammonia. Further, mass spectrometry (tandemmass spectrometry (MS/MS), high-resolutionmass spectrometry (HRMS)) and nuclear magnetic resonance (NMR) spectroscopy were employed to characterize the copper-peptide. Lastly, a three-dimensional (3D)model of hepcidin-25with bound copper(II) is presented. The identification of metal complexes and potential isoforms and isomers, from which the latter usually are left undetected by mass spectrometry, led to the conclusion that complementary analytical methods are needed to characterize a peptide calibrant or referencematerial comprehensively. Quantitative nuclear magnetic resonance (qNMR), inductively-coupled plasma mass spectrometry (ICP-MS), ion-mobility spectrometry (IMS) and chiral amino acid analysis (AAA) should be considered among others. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 701 KW - hepcidin-25 KW - copper KW - nickel KW - copper complex KW - ATCUN motif KW - metal complex KW - MS KW - NMR structure KW - metal peptide KW - metalloprotein KW - metallopeptide KW - isomerization KW - racemization KW - purity KW - reference material Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-427926 SN - 1866-8372 IS - 701 ER - TY - THES A1 - Bauch, Marcel T1 - Untersuchungen an neuartigen sauerstoffsubstituierten Donoren und Akzeptoren für Singulettsauerstoff T1 - Investigations of novel oxygen substituted donors and acceptors of singlet oxygen N2 - Im Verlauf dieser Arbeit wurden Aromaten wie Naphthaline und Anthracene mit Singulettsauerstoff, einer reaktiven Form des gewöhnlichen Sauerstoffs, zu sogenannten Endoperoxiden umgesetzt. Die hier eingesetzten Systeme wurden mit funktionellen Gruppen modifiziert, die über eine Sauerstoffbrücke mit dem Aromaten verknüpft sind. Die daraus entstandenen Endoperoxide sind meist besonders labil und konnten in dieser Arbeit isoliert und umfassend untersucht werden. Hierbei wurde zum einen das Reaktionsverhalten untersucht. Es konnte gezeigt werden, dass die Aromaten in Abhängigkeit ihrer funktionellen Gruppen unterschiedlich schnell mit Singulettsauerstoff reagieren. Die so ermittelten Reaktivitäten wurden zusätzlich durch theoretische Berechnungen gestützt. Die resultierenden Endoperoxide wurden unter verschiedenen Bedingungen wie erhöhter Temperatur oder einem sauren bzw. basischen Milieu auf ihre Stabilität hin untersucht. Dabei konnte gezeigt werden, dass die auf Naphthalinen basierenden Endoperoxiden den gebundenen Singulettsauerstoff in guten Ausbeuten oft schon bei sehr niedrigen Temperaturen (−40 bis 0 °C) freisetzen. Diese Verbindungen können daher als milde Quellen dieser reaktiven Sauerstoffspezies eingesetzt werden. Weiterhin konnten bei den Anthracenendoperoxiden Zerfallsmechanismen aufgeklärt und andere reaktive Sauerstoffspezies wie Wasserstoffperoxid oder Persäuren nachgewiesen werden. Zu den Modifikationen der Aromaten gehören auch Glucosereste. Dadurch könnten sich die hier hergestellten Endoperoxide als vielversprechende Verbindungen in der Krebstherapie herausstellen, da Krebszellen deutlich stärker als gesunde Zellen kohlenhydratreiche Verbindungen für ihren Stoffwechsel benötigen. Bei der Spaltung von Endoperoxiden mit Glucosesubstituenten werden ebenfalls reaktive Sauerstoffspezies frei, die so zum Zelltod führen könnten. N2 - During the course of this work aromatic compounds like naphthalenes and anthracenes have been converted to so-called endoperoxides which are products of the reaction with a highly reactive form of oxygen: singlet oxygen. Beforehand the applied systems have been modified with several substituents that are linked via an oxygen-bridge to the aromatic core. The resulting endoperoxides are usually quite labile. In this work those labile compounds could be isolated and thoroughly investigated. At first, the manner of reaction was studied. The aromats showed different reactions rates with singlet oxygen, depending on their functional groups. Furthermore, the determined rate constants as well as certain trends could be supported and verified by theoretical calculations. The resulting endoperoxides have been examined for their stability under certain conditions like acids, bases and elevated temperature. Here it could be shown that naphthalene endoperoxides are able to release the bound endoperoxide in good yields at very low temperatures to -40 to 0 °C). Hence, those compounds can be used as very mild sources of the reactive oxygen species. Moreover, the mechanisms referring to the decomposition of the anthracene endoperoxides could be clarified while other reactive oxygen species like hydrogen peroxide or peracids could be identified. A special modification of the aromats have been glucose substituents. The resulting aryl glycosides have been converted to promising endoperoxides. Such compounds could be used in cancer therapy, because cancer cells tend to need carbohydrate-based energy in a higher degree than healthy cells. During the cleavage of those glycoside endoperoxides reactive oxygen species are released, which might lead to cell death. KW - Singulettsauerstoff KW - Endoperoxide KW - Aromaten KW - singlet oxygen KW - endoperoxides KW - aromats Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-425140 ER - TY - GEN A1 - Breternitz, Joachim A1 - Lehmann, Frederike A1 - Barnett, Sarah A. A1 - Nowell, Harriott A1 - Schorr, Susan T1 - Zur Rolle der Iodid-Methylammonium-Interaktion in der Ferroelektrizität in CH3NH3PbI3 T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Ihre außergewöhnlich hohen Konversionseffizienzen von über 20 % und die einfache Zellherstellung machen Hybridperowskite zu heißen Kandidaten für alternative Solarzellenmaterialien. CH3NH3PbI3 als Archetyp dieser Materialklasse besitzt außergewöhnliche Eigenschaften wie eine sehr effiziente Umwandlung von Solarenergie, wobei besonders Ferroelektrizität als mögliche Erklärung in den Fokus gerückt ist. Diese erfordert allerdings eine nicht-zentrosymmetrische Kristallstruktur als notwendige Voraussetzung. Wir stellen hier eine Erklärung des Symmetriebruchs in diesem Material auf kristallographischem, d. h. fernordnungs-basiertem, Wege vor. Während das Molekülkation CH3NH3+ intrinsisch polar ist, ist es extrem fehlgeordnet und kann deshalb nicht die einzige Erklärung darstellen. Es verzerrt allerdings das umgebende Kristallgitter und ruft dadurch eine Verschiebung der Iod-Atome von den zentrosymmetrischen Positionen hervor. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1199 KW - ferroelectricity KW - hybrid perovskites KW - inorganic chemistry KW - photovoltaic materials KW - structure elucidation Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-525674 SN - 1866-8372 IS - 1 ER - TY - GEN A1 - Breternitz, Joachim A1 - Lehmann, Frederike A1 - Barnett, Sarah A. A1 - Nowell, Harriott A1 - Schorr, Susan T1 - Role of the Iodide-methylammonium interaction in the ferroelectricity of CH3NH3PbI3 T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Excellent conversion efficiencies of over 20% and facile cell production have placed hybrid perovskites at the forefront of novel solar cell materials, with CH3NH3PbI3 being an archetypal compound. The question why CH3NH3PbI3 has such extraordinary characteristics, particularly a very efficient power conversion from absorbed light to electrical power, is hotly debated, with ferroelectricity being a promising candidate. This does, however, require the crystal structure to be non-centrosymmetric and we herein present crystallographic evidence as to how the symmetry breaking occurs on a crystallographic and, therefore, long-range level. Although the molecular cation CH3NH3+ is intrinsically polar, it is heavily disordered and this cannot be the sole reason for the ferroelectricity. We show that it, nonetheless, plays an important role, as it distorts the neighboring iodide positions from their centrosymmetric positions. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1196 KW - ferroelectricity KW - hybrid perovskites KW - inorganic chemistry KW - photovoltaic materials KW - structure elucidation Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-518227 SN - 1866-8372 IS - 1 ER - TY - GEN A1 - Burek, Katja A1 - Dengler, Joachim A1 - Emmerling, Franziska A1 - Feldmann, Ines A1 - Kumke, Michael Uwe A1 - Stroh, Julia T1 - Lanthanide Luminescence Revealing the Phase Composition in Hydrating Cementitious Systems T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - The hydration process of Portland cement in a cementitious system is crucial for development of the high‐quality cement‐based construction material. Complementary experiments of X‐ray diffraction analysis (XRD), scanning electron microscopy (SEM) and time‐resolved laser fluorescence spectroscopy (TRLFS) using europium (Eu(III)) as an optical probe are used to analyse the hydration process of two cement systems in the absence and presence of different organic admixtures. We show that different analysed admixtures and the used sulphate carriers in each cement system have a significant influence on the hydration process, namely on the time‐dependence in the formation of different hydrate phases of cement. Moreover, the effect of a particular admixture is related to the type of sulphate carrier used. The quantitative information on the amounts of the crystalline cement paste components is accessible via XRD analysis. Distinctly different morphologies of ettringite and calcium−silicate−hydrates (C−S−H) determined by SEM allow visual conclusions about formation of these phases at particular ageing times. The TRLFS data provides information about the admixture influence on the course of the silicate reaction. The dip in the dependence of the luminescence decay times on the hydration time indicates the change in the structure of C−S−H in the early hydration period. Complementary information from XRD, SEM and TRLFS provides detailed information on distinct periods of the cement hydration process. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 808 KW - cement admixtures KW - cement hydration KW - Europium KW - luminescence KW - SEM KW - X-ray diffraction Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-442433 SN - 1866-8372 IS - 808 ER - TY - GEN A1 - Büchele, Dominique A1 - Chao, Madlen A1 - Ostermann, Markus A1 - Leenen, Matthias A1 - Bald, Ilko T1 - Multivariate chemometrics as a key tool for prediction of K and Fe in a diverse German agricultural soil-set using EDXRF T2 - Postprints der Universität Potsdam Mathematisch-Naturwissenschaftliche Reihe N2 - Within the framework of precision agriculture, the determination of various soil properties is moving into focus, especially the demand for sensors suitable for in-situ measurements. Energy-dispersive X-ray fluorescence (EDXRF) can be a powerful tool for this purpose. In this study a huge diverse soil set (n = 598) from 12 different study sites in Germany was analysed with EDXRF. First, a principal component analysis (PCA) was performed to identify possible similarities among the sample set. Clustering was observed within the four texture classes clay, loam, silt and sand, as clay samples contain high and sandy soils low iron mass fractions. Furthermore, the potential of uni- and multivariate data evaluation with partial least squares regression (PLSR) was assessed for accurate determination of nutrients in German agricultural samples using two calibration sample sets. Potassium and iron were chosen for testing the performance of both models. Prediction of these nutrients in 598 German soil samples with EDXRF was more accurate using PLSR which is confirmed by a better overall averaged deviation and PLSR should therefore be preferred. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 784 Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-439988 SN - 1866-8372 IS - 784 ER - TY - THES A1 - Debsharma, Tapas T1 - Cellulose derived polymers T1 - Polymere aus Cellulose BT - synthesis of functional and degradable polymers from cellulose N2 - Plastics, such as polyethylene, polypropylene, and polyethylene terephthalate are part of our everyday lives in the form of packaging, household goods, electrical insulation, etc. These polymers are non-degradable and create many environmental problems and public health concerns. Additionally, these polymers are produced from finite fossils resources. With the continuous utilization of these limited resources, it is important to look towards renewable sources along with biodegradation of the produced polymers, ideally. Although many bio-based polymers are known, such as polylactic acid, polybutylene succinate adipate or polybutylene succinate, none have yet shown the promise of replacing conventional polymers like polyethylene, polypropylene and polyethylene terephthalate. Cellulose is one of the most abundant renewable resources produced in nature. It can be transformed into various small molecules, such as sugars, furans, and levoglucosenone. The aim of this research is to use the cellulose derived molecules for the synthesis of polymers. Acid-treated cellulose was subjected to thermal pyrolysis to obtain levoglucosenone, which was reduced to levoglucosenol. Levoglucosenol was polymerized, for the first time, by ring-opening metathesis polymerization (ROMP) yielding high molar mass polymers of up to ~150 kg/mol. The poly(levoglucosenol) is thermally stable up to ~220 ℃, amorphous, and is exhibiting a relatively high glass transition temperature of ~100 ℃. The poly(levoglucosenol) can be converted to a transparent film, resembling common plastic, and was found to degrade in a moist acidic environment. This means that poly(levoglucosenol) may find its use as an alternative to conventional plastic, for instance, polystyrene. Levoglucosenol was also converted into levoglucosenyl methyl ether, which was polymerized by cationic ring-opening metathesis polymerization (CROP). Polymers were obtained with molar masses up to ~36 kg/mol. These polymers are thermally stable up to ~220 ℃ and are semi-crystalline thermoplastics, having a glass transition temperature of ~35 ℃ and melting transition of 70-100 ℃. Additionally, the polymers underwent cross-linking, hydrogenation and thiol-ene click chemistry. N2 - Kunststoffe wie Polyethylen, Polypropylen und Polyethylenterephthalat sind ein großer Bestandteil unseres Alltags und finden Verwendung unter anderem als Verpackungsmaterialien, Haushaltswaren und Elektroisolierungen. Diese Polymere werden aus fossilen Ressourcen hergestellt, sind nicht abbaubar und verursachen nicht nur viele Umweltprobleme sondern können auch zu Gesundheitsschäden führen. Aufgrund dessen muss die Verwendung von erneuerbaren Ressourcen geachtet werden, wobei die hergestellten Polymere im Idealfall komplett biologisch abbaubar sind. Obwohl viele biobasierte Polymere, wie Polymilchsäure, Polybutylensuccinatadipat oder Polybutylensuccinat, bekannt sind, hat noch keines das Potential gezeigt, herkömmliche Polymere zu ersetzen. Cellulose ist einer der am häufigsten in der Natur produzierten nachwachsenden Rohstoffe und kann in verschiedene kleine organische Moleküle wie Zucker (Saccharide), Furan und auch Levoglucosenon umgewandelt werden. Ziel dieser Arbeit ist die Verwendung von Levoglucosenon als Monomer für die Synthese von Polymeren. Säurebehandelte Cellulose wurde einer thermischen Pyrolyse unterzogen, um Levoglucosenon zu erhalten, das dann weiter zu Levoglucosenol reduziert wurde. Das Levoglucosenol wurde zum ersten Mal erfolgreich über eine Ringöffnungsmetathese-Polymerisation (ROMP) polymerisiert. Die Molmassen der hergestellten Polymere erreichten Werte von bis zu ~150 kg/mol. Die thermische Analyse von Poly(levoglucosenol) zeigt, dass es bis zu einer Temperatur von ~220 ℃ stabil ist, eine Glasübergangstemperatur bei ~100 ℃ hat und ein amorphes Polymer ist. Weiterhin kann das Poly(levoglucosenol) in feuchter saurer Umgebung in kurzer Zeit abgebaut werden. Aufgrund dieser Eigenschaften kann Poly(levoglucosenol) als Alternative zu konventionellem Kunststoff, wie z.B. Polystyrol, eingesetzt werden kann. Levoglucosenol wurde weiter in Levoglucosenylmethylether umgewandelt. Levoglucosenylmethylether kann mit kationischer Ringöffnungs-Polymerisation (CROP) polymerisiert werden. Es wurden Polymere mit Molmassen von bis zu ~36 kg/mol hergestellt. Die Polymere weisen eine thermische Stabilität bis zu einer Temperatur von ~220 °C auf. Es handelt sich bei den hergestellten Poly(levoglucosenylmethylethern) um teilkristalline Thermoplaste, deren Glasüberganstemperatur bei ~35 °C und der Schmelzbereich bei 70-100 °C liegt. Die Doppelbindungen des Levoglucosenylmethylethers wurden genutzt um das Polymer zu vernetzen und zu funktionalisieren. KW - biomass valorization KW - levoglucosenol KW - ring-opening polymerization KW - degradable polymer KW - sustainable chemistry KW - Biomasseverwertung KW - Levoglucosenol KW - ringöffnende Polymerisation KW - abbaubares Polymer KW - nachhaltige Chemie Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-441312 ER - TY - GEN A1 - Erler, Alexander A1 - Riebe, Daniel A1 - Beitz, Toralf A1 - Löhmannsröben, Hans-Gerd A1 - Gebbers, Robin T1 - Soil Nutrient Detection for Precision Agriculture Using Handheld Laser-Induced Breakdown Spectroscopy (LIBS) and Multivariate Regression Methods (PLSR, Lasso and GPR) T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Precision agriculture (PA) strongly relies on spatially differentiated sensor information. Handheld instruments based on laser-induced breakdown spectroscopy (LIBS) are a promising sensor technique for the in-field determination of various soil parameters. In this work, the potential of handheld LIBS for the determination of the total mass fractions of the major nutrients Ca, K, Mg, N, P and the trace nutrients Mn, Fe was evaluated. Additionally, other soil parameters, such as humus content, soil pH value and plant available P content, were determined. Since the quantification of nutrients by LIBS depends strongly on the soil matrix, various multivariate regression methods were used for calibration and prediction. These include partial least squares regression (PLSR), least absolute shrinkage and selection operator regression (Lasso), and Gaussian process regression (GPR). The best prediction results were obtained for Ca, K, Mg and Fe. The coefficients of determination obtained for other nutrients were smaller. This is due to much lower concentrations in the case of Mn, while the low number of lines and very weak intensities are the reason for the deviation of N and P. Soil parameters that are not directly related to one element, such as pH, could also be predicted. Lasso and GPR yielded slightly better results than PLSR. Additionally, several methods of data pretreatment were investigated. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 815 KW - LIBS KW - lasso KW - PLS regression KW - gaussian processes KW - soil KW - precision agriculture KW - nutrients Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-444183 SN - 1866-8372 IS - 815 ER - TY - THES A1 - Gabriel, Christina T1 - Entwicklung neuer Stärkederivate für die Anwendung als wasserbasierte Filmbildner in Farben und Lacken T1 - Development of new starch derivatives for application as water-based film formers in paints and varnishes N2 - In den letzten Jahrzehnten fand auch in der Beschichtungsindustrie ein Umdenken hin zu umweltfreundlicheren Farben und Lacken statt. Allerdings basieren auch neue Lösungen meist nicht auf Biopolymeren und in einem noch geringeren Anteil auf wasserbasierten Beschichtungssystemen aus nachwachsenden Rohstoffen. Dies stellt den Anknüpfungspunkt dieser Arbeit dar, in der untersucht wurde, ob das Biopolymer Stärke das Potenzial zum wasserbasierten Filmbildner für Farben und Lacke besitzt. Dabei müssen angelehnt an etablierte synthetische Marktprodukte die folgenden Kriterien erfüllt werden: Die wässrige Dispersion muss mindestens einen 30%igen Feststoffgehalt haben, bei Raumtemperatur verarbeitet werden können und Viskositäten zwischen 10^2-10^3 mPa·s aufweisen. Die finale Beschichtung muss einen geschlossenen Film bilden und sehr gute Haftfestigkeiten zu einer spezifischen Oberfläche, in dieser Arbeit Glas, besitzen. Als Grundlage für die Modifizierung der Stärke wurde eine Kombination von molekularem Abbau und chemischer Funktionalisierung ausgewählt. Da nicht bekannt war, welchen Einfluss die Stärkeart, die gewählte Abbaureaktion als auch verschiedene Substituenten auf die Dispersionsherstellung und deren Eigenschaften sowie die Beschichtungseigenschaften ausüben könnten, wurden die strukturellen Parameter getrennt voneinander untersucht. Das erste Themengebiet beinhaltete den oxidativen Abbau von Kartoffel- und Palerbsenstärke mittels des Hypochlorit-Abbaus (OCl-) und des ManOx-Abbaus (H2O2, KMnO4). Mit beiden Abbaureaktionen konnten vergleichbare gewichtsmittlere Molmassen (Mw) von 2·10^5-10^6 g/mol (GPC-MALS) hergestellt werden. Allerdings führten die gewählten Reaktionsbedingungen beim ManOx-Abbau zur Bildung von Gelpartikeln. Diese lagen im µm-Bereich (DLS und Kryo-REM-Messungen) und hatten zur Folge, dass die ManOx-Proben deutlich erhöhte Viskositäten (c: 7,5 %; 9-260 mPa·s) im Vergleich zu den OCl--Proben (4-10 mPa·s) bei scherverdünnendem Verhalten besaßen und die Eigenschaften von viskoelastischen Gelen (G‘ > G‘‘) zeigten. Des Weiteren wiesen sie reduzierte Heißwasserlöslichkeiten (95 °C, vorrangig: 70-99 %) auf. Der OCl--Abbau führte zu hydrophileren (Carboxylgruppengehalt bis zu 6,1 %; ManOx: bis zu 3,1 %), nach 95 °C-Behandlung vollständig wasserlöslichen abgebauten Stärken, die ein Newtonsches Fließverhalten mit Eigenschaften einer viskoelastischen Flüssigkeit (G‘‘ > G‘) hatten. Die OCl--Proben konnten im Vergleich zu den ManOx-Produkten (10-20 %) zu konzentrierteren Dispersionen (20-40 %) verarbeitet werden, die gleichzeitig die Einschränkung von anwendungsrelevanten Mw auf < 7·10^5 g/mol zuließen (Konzentration sollte > 30 % sein). Außerdem führten nur die OCl--Proben der Kartoffelstärke zu transparenten (alle anderen waren opak) geschlossenen Beschichtungsfilmen. Somit hebt sich die Kombination von OCl--Abbau und Kartoffelstärke mit Hinblick auf die Endanwendung ab. Das zweite Themengebiet umfasste Untersuchungen zum Einfluss von Ester- und Hydroxyalkylether-Substituenten auf Basis einer industriell abgebauten Kartoffelstärke (Mw: 1,2·10^5 g/mol) vor allem auf die Dispersionsherstellung, die rheologischen Eigenschaften der Dispersionen und die Beschichtungseigenschaften in Kombination mit Glassubstraten. Dazu wurden Ester und Ether mit DS/MS-Werten von 0,07-0,91 synthetisiert. Die Derivate konnten zu wasserbasierten Dispersionen mit Konzentrationen von 30-45 % verarbeitet werden, wobei bei hydrophoberen Modifikaten ein Co-Lösemittel, Diethylenglycolmonobutylether (DEGBE), eingesetzt werden musste. Die Feststoffgehalte sanken dabei für beide Derivatklassen vor allem mit zunehmender Alkylkettenlänge. Die anwendungsrelevanten Viskositäten (323-1240 mPa·s) stiegen auf Grund von Wechselwirkungen tendenziell mit DS/MS und Alkylkettenlänge an. Hinsichtlich der Beschichtungseigenschaften erwiesen sich die Ester vergleichend zu den Ethern als die bevorzugte Substituentenklasse, da nur die Ester geschlossene, defektfreie und mehrheitlich transparente Beschichtungsfilme bildeten, die exzellente bis sehr gute Haftfestigkeiten (ISO Klasse: 0 und 1) auf Glas besaßen. Die Ether bildeten mehrheitlich brüchige Filme. Basierend auf der Kombination der Ergebnisse aus Lösemittelaustausch, den rheologischen Untersuchungen und zusätzlichen Oberflächenspannungsmessungen (30-61 mN/m) konnte geschlossen werden, dass wahrscheinlich fehlende oder schlechte Haftfestigkeiten vorrangig akkumuliertem Wasser in den Beschichtungsfilmen (visuell: trüb oder weiß) geschuldet sind, während die Brüchigkeit vermutlich auf Wechselwirkungen (H-Brücken Wechselwirkungen, hydrophobe Wechselwirkungen) zwischen den Polymeren zurückgeführt werden kann. Insgesamt scheint die Kombination aus Kartoffelstärke basierend auf dem OCl--Abbau mit Mw < 7·10^5 g/mol und einem Estersubstituenten eine gute Wahl für wasserbasierte Dispersionen mit hohen Feststoffkonzentrationen (> 30 %), guter Filmbildung und exzellenten Haftungen auf Glas zu sein. N2 - In the last few decades, the coating industry, like many other industries, has changed its thinking towards more environmentally friendly paints and varnishes. However, even new solutions are usually not based on biopolymers and, to an even lesser extent, on water-based coating systems made from renewable raw materials. This is the starting point of this work, which aimed to investigate whether the biopolymer starch has the potential to be a water-based film former for paints and varnishes. Based on established synthetic market products, the following criteria must be fulfilled: The aqueous dispersion must have a solid content of at least 30%, be processable at room temperature and have viscosities of 10^2-10^3 mPa·s. The final coating must form a continuous film and have very good adhesion to a specific substrate, in this thesis glass. A combination of molecular degradation and chemical functionalisation was selected as the basis for the modification of the starch. Since it was not known what influence the type of starch, the chosen degradation reaction as well as different substituents could have on the dispersion production and its properties as well as on the coating properties, the structural parameters were investigated separately. The first part dealt with the oxidative degradation of potato and smooth pea starch by hypochlorite degradation (OCl-) and ManOx degradation (H2O2, KMnO4). With both degradation reactions comparable weight average molar masses (Mw) of 2·10^5-10^6 g/mol (SEC-MALS) could be synthesized. However, the selected reaction conditions led to the formation of gel particles during ManOx degradation. These were in the µm-range (DLS and cryo-REM measurements) and resulted in ManOx samples having significantly higher viscosities (c: 7.5%; 9-260 mPa·s) compared to OCl- samples (4-10 mPa·s) with shear-thinning behaviour and showing the properties of viscoelastic gels (G' > G''). Furthermore, they exhibited reduced hot water solubilities (95 °C, primarily: 70-99%). OCl- degradation led to more hydrophilic (carboxyl group content up to 6.1%; ManOx: up to 3.1%), after 95 °C treatment completely water-soluble degraded starches, which had Newtonian flow behaviour with properties of a viscoelastic liquid (G'' > G'). Compared to the ManOx products (10-20%), the OCl- samples could be processed to more concentrated dispersions (20-40%), which at the same time allowed the restriction of application-relevant Mw to < 7·10^5 g/mol (concentration should be > 30%). In addition, only the OCl- samples of the potato starch led to transparent (all others were opaque) continuous coating films. Thus, the combination of OCl- degradation and potato starch stands out with regard to the final application. The second part included investigations on the influence of ester and hydroxyalkyl ether substituents on the basis of an industrially degraded potato starch (Mw: 1.2·10^5 g/mol), particularly on dispersion preparation, rheological properties of the dispersions and the coating properties in combination with glass substrates. For this purpose, esters and ethers with DS/MS values of 0.07-0.91 were synthesized. The derivatives could be prepared to water-based dispersions with concentrations of 30-45%, whereby a co-solvent, diethylene glycol monobutyl ether (DEGBE), had to be used for more hydrophobic derivatives. The solid content of both derivative classes decreased most of all with increasing alkyl chain length. The application-relevant viscosities (323-1240 mPa·s) tended to increase due to interactions with DS/MS and alkyl chain length. With regard to the coating properties, esters proved to be the preferred substituent class compared to ethers, since only the esters formed continuous, defect free and mostly transparent coating films which had excellent to very good adhesion (ISO class: 0 and 1) on glass. The majority of ethers formed brittle films. Based on the combination of the results from solvent exchange, rheological investigations and additional surface tension measurements (30-61 mN/m), it could be concluded that probably missing or poor adhesion was primarily due to accumulated water in the coating films (visually: turbid or white), while the brittleness can probably be attributed to interactions (H-bridge interactions, hydrophobic interactions) between the polymers. Overall, the combination of potato starch based on OCl- degradation with Mw < 7·10^5 g/mol and an ester substituent seems to be a good choice for water-based dispersions with high solid concentrations (> 30%), good film formation and excellent adhesion to glass. KW - Stärke KW - starch KW - Filmbildner KW - film former KW - Beschichtung KW - coating Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-432942 ER - TY - GEN A1 - Heck, Christian A1 - Kanehira, Yuya A1 - Kneipp, Janina A1 - Bald, Ilko T1 - Amorphous Carbon Generation as a Photocatalytic Reaction on DNA-Assembled Gold and Silver Nanostructures T2 - Mathematisch-Naturwissenschaftliche Reihe N2 - Background signals from in situ-formed amorphous carbon, despite not being fully understood, are known to be a common issue in few-molecule surface-enhanced Raman scattering (SERS). Here, discrete gold and silver nanoparticle aggregates assembled by DNA origami were used to study the conditions for the formation of amorphous carbon during SERS measurements. Gold and silver dimers were exposed to laser light of varied power densities and wavelengths. Amorphous carbon prevalently formed on silver aggregates and at high power densities. Time-resolved measurements enabled us to follow the formation of amorphous carbon. Silver nanolenses consisting of three differently-sized silver nanoparticles were used to follow the generation of amorphous carbon at the single-nanostructure level. This allowed observation of the many sharp peaks that constitute the broad amorphous carbon signal found in ensemble measurements. In conclusion, we highlight strategies to prevent amorphous carbon formation, especially for DNA-assembled SERS substrates. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 732 KW - amorphous carbon KW - DNA origami KW - SERS KW - nanoparticle dimers KW - nanolenses Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-430812 SN - 1866-8372 IS - 732 ER - TY - GEN A1 - Jiang, Yi A1 - Mansfeld, Ulrich A1 - Kratz, Karl A1 - Lendlein, Andreas T1 - Programmable microscale stiffness pattern of flat polymeric substrates by temperature-memory technology T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Temperature-memory technology was utilized to generate flat substrates with a programmable stiffness pattern from cross-linked poly(ethylene-co-vinyl acetate) substrates with cylindrical microstructures. Programmed substrates were obtained by vertical compression at temperatures in the range from 60 to 100 degrees C and subsequent cooling, whereby a flat substrate was achieved by compression at 72 degrees C, as documented by scanning electron microscopy and atomic force microscopy (AFM). AFM nanoindentation experiments revealed that all programmed substrates exhibited the targeted stiffness pattern. The presented technology for generating polymeric substrates with programmable stiffness pattern should be attractive for applications such as touchpads. optical storage, or cell instructive substrates. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1102 KW - shape KW - surfaces KW - modulus Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-469745 SN - 1866-8372 VL - 9 IS - 1 SP - 181 EP - 188 ER - TY - GEN A1 - Kirste, Matthias A1 - Brietzke, Thomas Martin A1 - Holdt, Hans-Jürgen A1 - Schilde, Uwe T1 - The crystal structure of 1,12-diazaperylene, C₁₈H₁₀N₂ T2 - Postprints der Universität Potsdam Mathematisch-Naturwissenschaftliche Reihe N2 - C₁₈H₁₀N₂, monoclinic, P2₁/c (no. 14), a=7.9297(9) Å, b=11.4021(14) Å, c=13.3572(15) Å, β=105.363(8)°, V =1164.5(2) ų, Z =4, Rgt(F)=0.0325, wRref(F²)=0.0774, T =210(2) K. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 752 Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-436501 SN - 1866-8372 IS - 752 ER - TY - GEN A1 - Krueger, Tobias A1 - Kelling, Alexandra A1 - Linker, Torsten A1 - Schilde, Uwe T1 - Crystal structures of three cyclohexane‑based γ‑spirolactams BT - determination of configurations and conformations T2 - Postprints der Universität Potsdam Mathematisch-Naturwissenschaftliche Reihe N2 - The title compounds, 2-azaspiro[4.5]deca-1-one, C₉H₁₅NO, (1a), cis-8-methyl-2-azaspiro[4.5]deca-1-one, C₁₀H₁₇NO, (1b), and trans-8-methyl-2-azaspiro[4.5]deca-1-one, C₁₀H₁₇NO, (1c), were synthesized from benzoic acids 2 in only 3 steps in high yields. Crystallization from n-hexane afforded single crystals, suitable for X-ray diffraction. Thus, the configurations, conformations, and interesting crystal packing effects have been determined unequivocally. The bicyclic skeleton consists of a lactam ring, attached by a spiro junction to a cyclohexane ring. The lactam ring adopts an envelope conformation and the cyclohexane ring has a chair conformation. The main difference between compound 1b and compound 1c is the position of the carbonyl group on the 2-pyrrolidine ring with respect to the methyl group on the 8-position of the cyclohexane ring, which is cis (1b) or trans (1c). A remarkable feature of all three compounds is the existence of a mirror plane within the molecule. Given that all compounds crystallize in centrosymmetric space groups, the packing always contains interesting enantiomer-like pairs. Finally, the structures are stabilized by intermolecular N–H···O hydrogen bonds. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 738 KW - 2-Azaspiro[4.5]deca-1-ones KW - Cis- and trans-form KW - Configuration KW - Conformation KW - Lactams Y1 - 1019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-434911 IS - 738 ER - TY - GEN A1 - Liebig, Ferenc A1 - Henning, Ricky A1 - Sarhan, Radwan Mohamed A1 - Prietzel, Claudia Christina A1 - Schmitt, Clemens Nikolaus Zeno A1 - Bargheer, Matias A1 - Koetz, Joachim T1 - A simple one-step procedure to synthesise gold nanostars in concentrated aqueous surfactant solutions T2 - Postprints der Universität Potsdam Mathematisch-Naturwissenschaftliche Reihe N2 - Due to the enhanced electromagnetic field at the tips of metal nanoparticles, the spiked structure of gold nanostars (AuNSs) is promising for surface-enhanced Raman scattering (SERS). Therefore, the challenge is the synthesis of well designed particles with sharp tips. The influence of different surfactants, i.e., dioctyl sodium sulfosuccinate (AOT), sodium dodecyl sulfate (SDS), and benzylhexadecyldimethylammonium chloride (BDAC), as well as the combination of surfactant mixtures on the formation of nanostars in the presence of Ag⁺ ions and ascorbic acid was investigated. By varying the amount of BDAC in mixed micelles the core/spike-shell morphology of the resulting AuNSs can be tuned from small cores to large ones with sharp and large spikes. The concomitant red-shift in the absorption toward the NIR region without losing the SERS enhancement enables their use for biological applications and for time-resolved spectroscopic studies of chemical reactions, which require a permanent supply with a fresh and homogeneous solution. HRTEM micrographs and energy-dispersive X-ray (EDX) experiments allow us to verify the mechanism of nanostar formation according to the silver underpotential deposition on the spike surface in combination with micelle adsorption. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 769 KW - optical-properties KW - nanoparticles KW - sers KW - ultrafast KW - size KW - nanotriangles KW - nanoflowers KW - wavelength Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-438743 SN - 1866-8372 IS - 769 SP - 23633 EP - 23641 ER - TY - GEN A1 - Machatschek, Rainhard Gabriel A1 - Schöne, Anne-Christin A1 - Raschdorf, Elisa A1 - Ihlenburg, Ramona A1 - Schulz, Burkhard A1 - Lendlein, Andreas T1 - Interfacial properties of morpholine-2,5-dione-based oligodepsipeptides and multiblock copolymers T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Oligodepsipeptides (ODPs) with alternating amide and ester bonds prepared by ring-opening polymerization of morpholine-2,5-dione derivatives are promising matrices for drug delivery systems and building blocks for multifunctional biomaterials. Here, we elucidate the behavior of three telechelic ODPs and one multiblock copolymer containing ODP blocks at the air-water interface. Surprisingly, whereas the oligomers and multiblock copolymers crystallize in bulk, no crystallization is observed at the air-water interface. Furthermore, polarization modulation infrared reflection absorption spectroscopy is used to elucidate hydrogen bonding and secondary structures in ODP monolayers. The results will direct the development of the next ODP-based biomaterial generation with tailored properties for highly sophisticated applications. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1106 KW - block-copolymer KW - enzymatic degradation KW - poly(ester amide)s KW - controlled-release KW - films KW - nanocarriers Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-469755 SN - 1866-8372 IS - 1106 SP - 170 EP - 180 ER - TY - THES A1 - Melani, Giacomo T1 - From structural fluctuations to vibrational spectroscopy of adsorbates on surfaces T1 - Von Strukturfluktuationen bis zur Schwingungsspektroskopie von Adsorbaten auf Oberflächen BT - a theoretical study of H2O on α-Al2O3(0001) BT - eine theoretische Untersuchung von H2O auf α-Al2O3 (0001) N2 - Aluminum oxide is an Earth-abundant geological material, and its interaction with water is of crucial importance for geochemical and environmental processes. Some aluminum oxide surfaces are also known to be useful in heterogeneous catalysis, while the surface chemistry of aqueous oxide interfaces determines the corrosion, growth and dissolution of such materials. In this doctoral work, we looked mainly at the (0001) surface of α-Al 2 O 3 and its reactivity towards water. In particular, a great focus of this work is dedicated to simulate and address the vibrational spectra of water adsorbed on the α-alumina(0001) surface in various conditions and at different coverages. In fact, the main source of comparison and inspiration for this work comes from the collaboration with the “Interfacial Molecular Spectroscopy” group led by Dr. R. Kramer Campen at the Fritz-Haber Institute of the MPG in Berlin. The expertise of our project partners in surface-sensitive Vibrational Sum Frequency (VSF) generation spectroscopy was crucial to develop and adapt specific simulation schemes used in this work. Methodologically, the main approach employed in this thesis is Ab Initio Molecular Dynamics (AIMD) based on periodic Density Functional Theory (DFT) using the PBE functional with D2 dispersion correction. The analysis of vibrational frequencies from both a static and a dynamic, finite-temperature perspective offers the ability to investigate the water / aluminum oxide interface in close connection to experiment. The first project presented in this work considers the characterization of dissociatively adsorbed deuterated water on the Al-terminated (0001) surface. This particular structure is known from both experiment and theory to be the thermodynamically most stable surface termination of α-alumina in Ultra-High Vacuum (UHV) conditions. Based on experiments performed by our colleagues at FHI, different adsorption sites and products have been proposed and identified for D 2 O. While previous theoretical investigations only looked at vibrational frequencies of dissociated OD groups by staticNormal Modes Analysis (NMA), we rather employed a more sophisticated approach to directly assess vibrational spectra (like IR and VSF) at finite temperature from AIMD. In this work, we have employed a recent implementation which makes use of velocity-velocity autocorrelation functions to simulate such spectral responses of O-H(D) bonds. This approach allows for an efficient and qualitatively accurate estimation of Vibrational Densities of States (VDOS) as well as IR and VSF spectra, which are then tested against experimental spectra from our collaborators. In order to extend previous work on unimolecularly dissociated water on α-Al 2 O 3 , we then considered a different system, namely, a fully hydroxylated (0001) surface, which results from the reconstruction of the UHV-stable Al-terminated surface at high water contents. This model is then further extended by considering a hydroxylated surface with additional water molecules, forming a two-dimensional layer which serves as a potential template to simulate an aqueous interface in environmental conditions. Again, employing finite-temperature AIMD trajectories at the PBE+D2 level, we investigated the behaviour of both hydroxylated surface (HS) and the water-covered structure derived from it (known as HS+2ML). A full range of spectra, from VDOS to IR and VSF, is then calculated using the same methodology, as described above. This is the main focus of the second project, reported in Chapter 5. In this case, comparison between theoretical spectra and experimental data is definitely good. In particular, we underline the nature of high-frequency resonances observed above 3700 cm −1 in VSF experiments to be associated with surface OH-groups, known as “aluminols” which are a key fingerprint of the fully hydroxylated surface. In the third and last project, which is presented in Chapter 6, the extension of VSF spectroscopy experiments to the time-resolved regime offered us the opportunity to investigate vibrational energy relaxation at the α-alumina / water interface. Specifically, using again DFT-based AIMD simulations, we simulated vibrational lifetimes for surface aluminols as experimentally detected via pump-probe VSF. We considered the water-covered HS model as a potential candidate to address this problem. The vibrational (IR) excitation and subsequent relaxation is performed by means of a non-equilibrium molecular dynamics scheme. In such a scheme, we specifically looked at the O-H stretching mode of surface aluminols. Afterwards, the analysis of non-equilibrium trajectories allows for an estimation of relaxation times in the order of 2-4 ps which are in overall agreement with measured ones. The aim of this work has been to provide, within a consistent theoretical framework, a better understanding of vibrational spectroscopy and dynamics for water on the α-alumina(0001) surface,ranging from very low water coverage (similar to the UHV case) up to medium-high coverages, resembling the hydroxylated oxide in environmental moist conditions. N2 - Das Hauptziel dieser Doktorarbeit war die Untersuchung der Wechselwirkung zwischen Aluminiumoxid (α-Al2O3) und Wasser, wobei die (0001)-Oberfläche von α-Al2O3 im Fokus der Betrachtungen stand. Infolge der Entwicklung moderner oberflächensensitiver spektroskopischer Methoden, insbesondere in der Schwingungsspektroskopie, ist es inzwischen experimentell möglich, die Oberflächenchemie dieser Oxidmaterialien zu untersuchen und atomistische Informationen über ihre wässrigen Grenzflächen zu erhalten. Unsere Gruppe hat mit der Interfacial Molecular Spectroscopy Gruppe des Fritz-Haber-Instituts der MPG in Berlin zusammengearbeitet, deren Expertise in der oberflächensensitiven Vibrational Sum Frequency (VSF) Generation liegt. Diese Technik gestattet den spezifischen Nachweis von Adsorbatvibrationen, beispielsweise des Produkts der Wasserdissoziation und -adsorption. Zur theoretischen Untersuchung dieses Systems wurden verschiedene Berechnungsmethoden genutzt, wobei bevorzugt die Ab-initio-Molekulardynamik (AIMD) zum Einsatz kam. Darüber hinaus konzentrierten wir uns auf die Simulation von Schwingungsfrequenzen und -spektren für verschiedene Systeme unter Verwendung eines neuen, effizienten Algorithmus, der auf Grundlage klassischer Zeitkorrelationsfunktionen entwickelt wurde. Das erste Projekt untersuchte die einfachsten Adsorptionsprodukte von Wasserreaktionen auf der Al-terminierten α-Al2O3(0001)-Oberfläche, die unter Ultrahochvakuumbedingungen (UHV) als stabilste Struktur bekannt ist. Mit AIMD-basierten Methoden haben wir verschiedene Spezies simuliert, die aus unimolekular adsorbiertem Wasser stammen, und ihre Schwingungsfrequenzen im Vergleich zum Experiment bestimmt. In einem zweiten Projekt widmeten wir uns einer Situation, in der eine vollständig hydroxylierte α-Aluminiumoxid-Oberfläche mit einer ebenfalls vollständig hydroxylierten, aber um eine zusätzliche Wasserschicht erweiterten α-Aluminiumoxid-Oberfläche wechselwirkt. Diese beiden Strukturen dienen als Grundlage zur weitergehenden Untersuchung von Aluminiumoxid-Oberflächen mit größeren Wasser-Bedeckungsgraden unter Umgebungsbedingungen. Wiederum simulierten wir vollständige Schwingunsspektren (einschließlich IR und VSF). Hierzu wurden etablierte Methoden genutzt, die auf der Verwendung von Zeitkorrelationsfunktionen basieren, jedoch von uns im Rahmen dieser Doktorarbeit weiterentwickelt wurden. Schließlich haben wir in einem dritten Projekt in Zusammenarbeit mit Experimentatoren die Schwingungsrelaxation an der Wasser / α-Al2O3-Grenzfläche beschrieben. Motiviert durch Pump-Probe-VSF-Experimente zur Bestimmung der Schwingungslebensdauer adsorbierter OH-Spezies entwickelten und verwendeten wir einen AIMD-Ansatz zur Simulation der Anregungs- und Relaxationsprozesse. Auf Grundlage von Nichtgleichgewichtstrajektorien konnten wir auch eine Relaxationszeitskala für OH-Gruppen ermitteln, die zwischen 2 und 4 Pikosekunden beträgt und gut mit experimentellen Werten übereinstimmt. KW - theoretical chemistry KW - molecular dynamics KW - DFT KW - vibrational spectroscopy KW - theoretische Chemie KW - Molekulardynamik KW - DFT KW - Schwingungsspektroskopie Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-441826 ER - TY - THES A1 - Menski, Antonia Isabell T1 - Europium als strukturelle Sonde zur Analyse neuartiger Materialien T1 - Europium as a structural probe for the analysis of novel materials N2 - Im Rahmen dieser Arbeit wird anhand von neuartigen Materialien das Potential der Europium-Lumineszenz für die strukturelle Analyse dargestellt. Bei diesen Materialien handelt es sich zum einen um Nanopartikel mit Matrizes aus mehreren Metall-Mischoxiden und Dotierungen durch die Sonde Europium und zum anderen um Metallorganische Netzwerke (MOFs), die mit Neodym , Samarium- und Europium-Ionen beladen sind. Die Synthese der aus der Kombination von Metalloxiden enthaltenen Nanopartikel ist unter milden Bedingungen mithilfe von speziell dafür hergestellten Reagenzien erfolgt und hat zu sehr kleinen, amorphen Nanopartikeln geführt. Durch eine nachfolgende Temperaturbehandlung hat sich die Kristallinität erhöht. Damit verbunden haben sich auch die Kristallstruktur sowie die Position des Dotanden Europium verändert. Während die etablierte Methode der Röntgendiffraktometrie einen Blick auf das Kristallgitter als Gesamtes ermöglicht, so trifft die Lumineszenz des Europiums durch die Sichtbarkeit einzelner Stark-Aufspaltungen Aussagen über dessen lokale Symmetrien. Die Symmetrie wird durch Sauerstofffehlstellen verändert, welche die Sauerstoffleitfähigkeit der Nanopartikel beeinflussen. Diese ist für die Anwendung als Katalysatoren in industriellen Prozessen und ebenso als Sensoren und Therapeutika in biologischen Systemen von Bedeutung. Zur ersten katalytischen Charakterisierung werden die Proben mittels Temperatur-programmierter Reduktion untersucht. Des Weiteren werden die Mischoxid-Nanopartikel auch hinsichtlich ihrer Verwendbarkeit als Matrix in Aufkonversionsprozessen untersucht. Die Metallorganischen Netzwerke eignen sich aufgrund ihrer mikroporösen Struktur für Anwendungen in der Speicherung gleichermaßen von Nutzgasen wie auch von Schadstoffen. Ebenfalls ist eine biologische Anwendung denkbar, die insbesondere den Bereich der drug delivery-Reagenzien betrifft. Erfolgt in die mikroporösen Strukturen der Metallorganischen Netzwerke die Einlagerung von Lanthanoid-Ionen, so können diese bei der entsprechenden Kombination als Weißlicht-Emittierer fungieren. Dabei ist neben den Verhältnissen zwischen den Lanthanoid-Ionen auch die genaue Position innerhalb des Netzwerks sowie die Distanz zu anderen Ionen von Interesse. Zur Untersuchung dieser Fragestellungen wird die Umgebungssensitivität der Europium-Lumineszenz ausgenutzt. Die auf diese Weise festgestellte Formiat-Bildung hängt von zahlreichen Parametern ab. Insgesamt stellt sich die im Rahmen dieser Arbeit verwendete Methodik des Einsatzes von Europium als strukturelle Sonde in höchstem Maße vielseitig dar und zeigt seine größte Stärke in der Kombination mit weiteren Methoden der Strukturanalytik. Die auf diese Weise genauestens charakterisierten neuartigen Materialien können nun gezielt und anwendungsfokussiert weiterentwickelt werden. N2 - In this work the potential of the luminescence of europium for structural analysis using novel materials is presented. These materials are on the one hand side nanoparticles made of various metal mixed oxide and doped by europium as a structural probe and on the other hand side the so-called metal organic frameworks (MOFs) loaded with neodymium, samarium and europium ions. The synthesis of the metal mixed oxide nanoparticles is done under mild conditions using reagents that have been specifically produced for this application. It leads to very small and amorphous nanoparticles. The crystallinity is increased by downstreamed temperature treatment. Related to that, the crystal structure and the position of the europium dopant have changed. While the well-established method of X-ray-diffraction offers an insight to the whole crystal lattice, the luminescence of europium gives information about the local symmetry of single europium ions using the visibility of single Stark-splittings. The symmetry is changed by oxygen vacancies which have an influence on the oxygen conductivity of the nanoparticles. This property is important for the application in industrial catalysts as well as in sensors and therapeutic agents in biological systems. For basic catalytical characterisation the samples are examined using the method of temperature-programmed reduction. Furthermore, the metal mixed oxide nanoparticles are also evaluated concerning the usability of the matrix in upconversion-processes. The metal organic frameworks are suitable for the storage of technical gases and pollutants due to their microporous structure. An application in the biological context can be seen especially in the field of drug delivery agents. By intercalation of certain combinations of lanthanide ions in the microporous structure of the metal organic frameworks, white light emitters can be developed. In this application the ratio between the lanthanide ions as well as their exact position within the framework and the distance between the single ions are of interest. For unravelling the regarding open questions, the environment-sensitive luminescence of the europium is used. The determined formate formation depends on several parameters. To sum up, the method of using europium as a structural probe as shown in this work is highly versatile and proves its worth in combination with further methods of structural analysis. Furthermore, an advanced development of the novel materials with focus on specific applications is now well prepared due to precise characterisation. KW - Spektroskopie KW - Nanomaterialien KW - Ceroxid KW - metallorganische Netzwerke KW - spectroscopy KW - nanomaterials KW - cerium oxide KW - metal organic frameworks Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-427141 ER - TY - THES A1 - Noack, Sebastian T1 - Poly(lactide)-based amphiphilic block copolymers T1 - Polylactid-basierte amphiphile Blockcopolymere BT - self-assembly and stereocomplexation in aqueous media BT - Selbstorganisation und Stereokomplexierung in wässrigem Medium N2 - Due to its bioavailability and (bio)degradability, poly(lactide) (PLA) is an interesting polymer that is already being used as packaging material, surgical seam, and drug delivery system. Dependent on various parameters such as polymer composition, amphiphilicity, sample preparation, and the enantiomeric purity of lactide, PLA in an amphiphilic block copolymer can affect the self-assembly behavior dramatically. However, sizes and shapes of aggregates have a critical effect on the interactions between biological and drug delivery systems, where the general understanding of these polymers and their ability to influence self-assembly is of significant interest in science. The first part of this thesis describes the synthesis and study of a series of linear poly(L-lactide) (PLLA) and poly(D-lactide) (PDLA)-based amphiphilic block copolymers with varying PLA (hydrophobic), and poly(ethylene glycol) (PEG) (hydrophilic) chain lengths and different block copolymer sequences (PEG-PLA and PLA-PEG). The PEG-PLA block copolymers were synthesized by ring-opening polymerization of lactide initiated by a PEG-OH macroinitiator. In contrast, the PLA-PEG block copolymers were produced by a Steglich-esterification of modified PLA with PEG-OH. The aqueous self-assembly at room temperature of the enantiomerically pure PLLA-based block copolymers and their stereocomplexed mixtures was investigated by dynamic light scattering (DLS), transmission electron microscopy (TEM), wide-angle X-ray diffraction (WAXD), and differential scanning calorimetry (DSC). Spherical micelles and worm-like structures were produced, whereby the obtained self-assembled morphologies were affected by the lactide weight fraction in the block copolymer and self-assembly time. The formation of worm-like structures increases with decreasing PLA-chain length and arises from spherical micelles, which become colloidally unstable and undergo an epitaxial fusion with other micelles. As shown by DSC experiments, the crystallinity of the corresponding PLA blocks increases within the self-assembly time. However, the stereocomplexed self-assembled structures behave differently from the parent polymers and result in irregular-shaped clusters of spherical micelles. Additionally, time-dependent self-assembly experiments showed a transformation, from already self-assembled morphologies of different shapes to more compact micelles upon stereocomplexation. In the second part of this thesis, with the objective to influence the self-assembly of PLA-based block copolymers and its stereocomplexes, poly(methyl phosphonate) (PMeP) and poly(isopropyl phosphonate) (PiPrP) were produced by ring-opening polymerization to implement an alternative to the hydrophilic block PEG. Although, the 1,8 diazabicyclo[5.4.0]unde 7 ene (DBU) or 1,5,7 triazabicyclo[4.4.0]dec-5-ene (TBD) mediated synthesis of the corresponding poly(alkyl phosphonate)s was successful, however, not so the polymerization of copolymers with PLA-based precursors (PLA-homo polymers, and PEG-PLA block copolymers). Transesterification, obtained by 1H-NMR spectroscopy, between the poly(phosphonate)- and PLA block caused a high-field shifted peak split of the methine proton in the PLA polymer chain, with split intensities depending on the used catalyst (DBU for PMeP, and TBD for PiPrP polymerization). An additional prepared block copolymer PiPrP-PLLA that wasn’t affected in its polymer sequence was finally used for self-assembly experiments with PLA-PEG and PEG-PLA mixing. This work provides a comprehensive study of the self-assembly behavior of PLA-based block copolymers influenced by various parameters such as polymer block lengths, self-assembly time, and stereocomplexation of block copolymer mixtures. N2 - Aufgrund seiner Bioverfügbarkeit und (biologischen) Abbaubarkeit stellt Polylactid (PLA) ein interessantes Polymer dar, welches bereits in Verpackungsmaterialien, chirurgische Fäden und in selbst organisierten Wirkstofftransportsystemen eingesetzt wird. Als ein Teil von amphiphilen Blockcopolymeren kann PLA die molekulare Selbstorganisation in wässrigen Lösungen wesentlich beeinflussen. Die gebildeten Strukturen sind dabei essenziell von Faktoren wie der Blockcopolymer Zusammensetzung, Amphiphilie, Proben Vorbereitung und der Enantiomerenreinheit des Monomers abhängig. Die Kenntnis über die beschriebenen Faktoren und das allgemeine Verständnis für die dazugehörigen Polymere sowie die Möglichkeit ihre Selbstorganisation zu beeinflussen, ist von entscheidender Bedeutung in biomedizinischen Anwendungen. Unterschiedliche Größen oder Formen der selbst organisierten Wirkstoffträgern haben einen erheblichen Effekt auf die Wechselwirkung mit dem entsprechenden biologischen System und somit einen essenziellen Einfluss auf den Ausgang der medikamentösen Therapie. Der erste Teil dieser Doktorarbeit beschreibt die Synthese und Untersuchung einer Serie von Poly(L-Lactid) (PLLA) und Poly(D-Lactid) (PDLA)-basierten amphiphilen Blockcopolymeren mit variierenden PLA (hydrophob) und Polyethylenglycol (PEG) (hydrophil) Kettenlägen, sowie unterschiedlichen Polymersequenzen (PEG-PLA und PLA-PEG). Die genannten PEG-PLA Blockcopolymere wurden mittels organokatalysierter ringöffnender Polymerisation (ROP) hergestellt, wobei das entsprechende PEG-OH als Makroinitiator diente. Im Gegensatz dazu mussten die entsprechenden PLA-PEG Blockcopolymere mittels Steglich Veresterung von modifizierten PLA mit PEG-OH hergestellt werden. Die Selbstorganisation der PLLA-basierten Blockcopolymeren und deren stereokomplexierten Mischungen in wässriger Lösung erfolgte unter Raumtemperatur und wurde mittels Dynamischer Lichtstreuung (DLS), Transmissionselektronenmikroskopie (TEM), Röntgenstrukturanalyse und Dynamische Differenzkalorimetrie (DSC) untersucht. Dabei wurden kugel- und wurmförmige Strukturen beobachtet, wobei die gebildeten Strukturen vom Lactid Gewichtsanteil im Polymer, sowie der Selbstorganisationszeit abhängig waren. Mit andauernder Selbstorganisation und zunehmender Kristallinität wurden die zuerst gebildeten kugelförmigen Strukturen kolloidal unstabil und es erfolgte ein epitaktisches Wachstum zu wurmförmigen Strukturen in Abhängigkeit der Lactid Kettenlänge. Die stereokomplexierten Blockcopolymer Mischungen hingegen bildeten, unabhängig von der Copolymersequenz der entsprechenden Polymer Partner, hauptsächlich unregelmäßige Ansammlungen kugelförmiger Strukturen welche den Eindruck einer Perlenkette erweckten. Mit dem Einsetzen der Stereokomplexierung zeigten zeitlich aufgelöste Selbstorganisationsexperimente eine Transformation von bereits gebildeten Strukturen verschiedenster Formen und Größen (Polymer abhängig) zu kompakten Mizellen. Im zweiten Teil dieser Doktorarbeit wurden, mit dem Ziel die Selbstorganisation von PLA-basierten Blockcopolymeren und deren Stereokomplexmischung vermehrt zu beeinflussen, zwei alternative Polymere zu PEG untersucht. Ähnlich wie PLA, konnten mittels organokatalysierter ROP Polymethylphosphonat (PMeP) und Polyisopropylphosphonat (PiPrP) erfolgreich hergestellt werden. Die Blockcopolymer Synthese mit PLA-basierten Polymervorgängern erwies sich jedoch als schwierig. Aufgrund einer Protonenpeakspaltung der Methingruppe in der PLA-Wiederholeinheit konnten mittels 1H-NMR Spektroskopie Umersterungsprozesse zwischen dem Polyalkylphosphonat- und PLA block nachgewiesen werden, welche in Abhängigkeit des verwendeten Katalysators (DBU oder TBD) unterschiedlich stark ausfielen. Das ebenfalls hergestellte PiPrP-PLLA Blockcopolymer wies keine Unregelmäßigkeiten in der Polymersequenz auf und wurde anschließend für Selbstorganisationsexperimente mit PLA-PEG und PEG-PLA genutzt. Diese Arbeit liefert eine umfangreiche Studie zur Selbstorganisation PLA-basierter Blockcopolymere und untersucht verschiedenste Einflussparameter wie Blocklängen, Selbstorganisationszeit und Stereokomplexierung in Polymermischungen. KW - polylactide KW - polymer KW - self-assembly KW - stereocomplexation KW - block copolymer KW - Polylactid KW - Polymer KW - Selbstorganisation KW - Stereokomplexierung KW - Block Copolymer Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-436168 ER - TY - THES A1 - Otte, Fabian T1 - C-Arylglykoside und Chalkone T1 - Aryl C-glycosides and chalcones BT - neue Wege zu heterozyklischen Wirkstoffen durch Ru- und Pd-katalysierte Reaktionen BT - new pathways to heterocyclic drugs by Ru- and Pd-catalyzed reactions N2 - Im bis heute andauernden Zeitalter der wissenschaftlichen Medizin, konnte ein breites Spektrum von Wirkstoffen zur Behandlung diverser Krankheiten zusammengetragen werden. Dennoch hat es sich die organische Synthesechemie zur Aufgabe gemacht, dieses Spektrum auf neuen oder bekannten Wegen und aus verschiedenen Gründen zu erweitern. Zum einen ist das Vorkommen bestimmter Verbindungen in der Natur häufig limitiert, sodass synthetische Methoden immer öfter an Stelle eines weniger nachhaltigen Abbaus treten. Zum anderen kann durch Derivatisierung und Wirkstoffanpassung die physiologische Wirkung oder die Bioverfügbarkeit eines Wirkstoffes erhöht werden. In dieser Arbeit konnten einige Vertreter der bekannten Wirkstoffklassen C-Arylglykoside und Chalkone durch den Schlüsselschritt der Palladium-katalysierten MATSUDA-HECK-Reaktion synthetisiert werden. Dazu wurden im Fall der C-Arylglykoside zunächst ungesättigte Kohlenhydrate (Glykale) über eine Ruthenium-katalysierte Zyklisierungsreaktion dargestellt. Diese wurden im Anschluss mit unterschiedlich substituierten Diazoniumsalzen in der oben erwähnten Palladium-katalysierten Kupplungsreaktion zur Reaktion gebracht. Bei der Auswertung der analytischen Daten konnte festgestellt werden, dass stets die trans-Diastereomere gebildet wurden. Im Anschluss konnte gezeigt werden, dass die Doppelbindungen dieser Verbindungen durch Hydrierung, Dihydroxylierung oder Epoxidierung funktionalisiert werden können. Auf diesem Wege konnte u. a. eine dem Diabetesmedikament Dapagliflozin ähnliche Verbindung hergestellt werden. Im zweiten Teil der Arbeit wurden Arylallylchromanone durch die MATSUDA-HECK-Reaktion von verschiedenen 8-Allylchromanonen mit Diazoniumsalzen dargestellt. Dabei konnte beobachtet werden, dass eine MOM-Schutzgruppe in 7-Position der Moleküle die Darstellung von Produktgemischen unterdrückt und jeweils nur eine der möglichen Verbindungen gebildet wird. Die Lage der Doppelbindung konnte mittels 2D-NMR-Untersuchungen lokalisiert werden. In Kooperation mit der theoretischen Chemie sollte durch Berechnungen untersucht werden, wie die beobachteten Verbindungen entstehen. Durch eine auftretende Wechselwirkung innerhalb des Moleküls konnte allerdings keine explizite Aussage getroffen werden. Im Anschluss sollten die erhaltenen Verbindungen in einer allylischen Oxidation zu Chalkonen umgesetzt werden. Die Ruthenium-katalysierten Methoden zeigten u. a. keine Eignung. Es konnte allerdings eine metallfreie, Mikrowellen-unterstützte Methode erfolgreich erprobt werden, sodass die Darstellung einiger Vertreter dieser physiologisch aktiven Stoffklasse gelang. N2 - The ongoing age of scientific medicine spawned a broad spectrum of drugs for the treatment of various diseases. Nonetheless, it is the task of synthetic organic chemistry to expand this spectrum in new or known pathways and for various reasons. On the one hand, the availability of certain compounds in nature is often limited, so that synthetic methods increasingly take the place of less sustainable extraction. On the other hand, the physiological effect or the bioavailability of a drug can be increased through derivatization and drug adaptation. In this work, several representatives of the known drug classes aryl C-glycosides and chalcones were synthesized by the key step of palladium-catalyzed MATSUDA-HECK reaction. In the case of aryl C-glycosides, unsaturated carbohydrates (glycals) were first prepared by a ruthenium-catalyzed cyclization reaction. These were subsequiently reacted with differently substituted diazonium salts in the above-mentioned palladium-catalyzed coupling reaction. When evaluating the analytical data, it was found that the trans-diastereomers were solitarily formed. Subsequiently, it was shown that the double bonds of these compounds can be functionalized by hydrogenation, dihydroxylation and epoxidation. By applying these methods an aryl C-glycoside similar to the diabetes drug Dapagliflozin was synthesized. The second part of this work, depicts the synthesis of aryl allyl chromanones by the Matsuda-Heck reaction of various 8-allyl chromanones and diazonium salts. It could be observed that a MOM-protection group in the 7-position of the chromanone ring suppresses the expression of product mixtures. In each case only one of the possible compounds is formed. The position of the double bond was localized by 2D NMR studies. In cooperation with theoretical chemistry, calculations were carried out to investigate how the observed compounds were formed. However, an explicit statement could not be made, due to an interaction within the molecule. Finally, the compounds obtained were converted into chalcones in an allylic oxidation reaction. Ru-catalyzed methods showed no suitability. However, a metal-free, microwave-assisted method could be successfully applied so that the synthesis of certain examples of this physiologically active substance class could be shown. KW - C-Arlyglykosid KW - Chalkon KW - Matsuda-Heck-Reaktion KW - Ringschlussmetathese KW - aryl C-glycoside KW - chalcon KW - Matsuda-Heck reaction KW - ring closing metathesis Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-434305 ER - TY - THES A1 - Qin, Qing T1 - Chemical functionalization of porous carbon-based materials to enable novel modes for efficient electrochemical N2 fixation T1 - Chemische Funktionalisierung von porösen Materialien auf Kohlenstoffbasis zur Ermöglichung neuartiger Verfahren für eine effiziente elektrochemische N2-Fixierung N2 - The central motivation of the thesis was to provide possible solutions and concepts to improve the performance (e.g. activity and selectivity) of electrochemical N2 reduction reaction (NRR). Given that porous carbon-based materials usually exhibit a broad range of structural properties, they could be promising NRR catalysts. Therefore, the advanced design of novel porous carbon-based materials and the investigation of their application in electrocatalytic NRR including the particular reaction mechanisms are the most crucial points to be addressed. In this regard, three main topics were investigated. All of them are related to the functionalization of porous carbon for electrochemical NRR or other electrocatalytic reactions. In chapter 3, a novel C-TixOy/C nanocomposite has been described that has been obtained via simple pyrolysis of MIL-125(Ti). A novel mode for N2 activation is achieved by doping carbon atoms from nearby porous carbon into the anion lattice of TixOy. By comparing the NRR performance of M-Ts and by carrying out DFT calculations, it is found that the existence of (O-)Ti-C bonds in C-doped TixOy can largely improve the ability to activate and reduce N2 as compared to unoccupied OVs in TiO2. The strategy of rationally doping heteroatoms into the anion lattice of transition metal oxides to create active centers may open many new opportunities beyond the use of noble metal-based catalysts also for other reactions that require the activation of small molecules as well. In chapter 4, a novel catalyst construction composed of Au single atoms decorated on the surface of NDPCs was reported. The introduction of Au single atoms leads to active reaction sites, which are stabilized by the N species present in NDPCs. Thus, the interaction within as-prepared AuSAs-NDPCs catalysts enabled promising performance for electrochemical NRR. For the reaction mechanism, Au single sites and N or C species can act as Frustrated Lewis pairs (FLPs) to enhance the electron donation and back-donation process to activate N2 molecules. This work provides new opportunities for catalyst design in order to achieve efficient N2 fixation at ambient conditions by utilizing recycled electric energy. The last topic described in chapter 5 mainly focused on the synthesis of dual heteroatom-doped porous carbon from simple precursors. The introduction of N and B heteroatoms leads to the construction of N-B motives and Frustrated Lewis pairs in a microporous architecture which is also rich in point defects. This can improve the strength of adsorption of different reactants (N2 and HMF) and thus their activation. As a result, BNC-2 exhibits a desirable electrochemical NRR and HMF oxidation performance. Gas adsorption experiments have been used as a simple tool to elucidate the relationship between the structure and catalytic activity. This work provides novel and deep insights into the rational design and the origin of activity in metal-free electrocatalysts and enables a physically viable discussion of the active motives, as well as the search for their further applications. Throughout this thesis, the ubiquitous problems of low selectivity and activity of electrochemical NRR are tackled by designing porous carbon-based catalysts with high efficiency and exploring their catalytic mechanisms. The structure-performance relationships and mechanisms of activation of the relatively inert N2 molecules are revealed by either experimental results or DFT calculations. These fundamental understandings pave way for a future optimal design and targeted promotion of NRR catalysts with porous carbon-based structure, as well as study of new N2 activation modes. N2 - Die zentrale Motivation der Arbeit war es, mögliche Lösungen und Konzepte zur Verbesserung der Leistung (z.B. Aktivität und Selektivität) der elektrochemischen N2-Reduktionsreaktion (NRR) anzubieten. Da poröse Materialien auf Kohlenstoffbasis in der Regel ein breites Spektrum an strukturellen Eigenschaften aufweisen, könnten sie vielversprechende NRR-Katalysatoren sein. Daher sind das fortgeschrittene Design neuartiger poröser Materialien auf Kohlenstoffbasis und die Untersuchung ihrer Anwendung in der elektrokatalytischen NRR einschließlich der besonderen Reaktionsmechanismen die wichtigsten Punkte, die angegangen werden müssen. In diesem Zusammenhang wurden drei Hauptthemen untersucht. Alle von ihnen stehen im Zusammenhang mit der Funktionalisierung von porösem Kohlenstoff für elektrochemische NRR oder andere elektrokatalytische Reaktionen. In Kapitel 3 wurde ein neuartiger C-TixOy/C-Nanokomposit beschrieben, der durch einfache Pyrolyse von MIL-125(Ti) gewonnen wurde. Ein neuartiger Modus für die N2-Aktivierung wird durch Dotierung von Kohlenstoffatomen aus nahegelegenem porösem Kohlenstoff in das Aniongitter von TixOy erreicht. Durch den Vergleich der NRR-Leistung von M-Ts und die Durchführung von DFT-Berechnungen wird festgestellt, dass die Existenz von (O-)Ti-C-Bindungen in C-dotiertem TixOy die Fähigkeit zur Aktivierung und Reduktion von N2 im Vergleich zu unbesetzten OVs in TiO2 erheblich verbessern kann. Die Strategie, Heteroatome rational in das Aniongitter von Übergangsmetalloxiden zu dotieren, um aktive Zentren zu schaffen, kann viele neue Möglichkeiten eröffnen, die über den Einsatz von edelmetallbasierten Katalysatoren hinausgehen, auch für andere Reaktionen, die ebenfalls die Aktivierung von kleinen Molekülen erfordern. In Kapitel 4 wurde über eine neuartige Katalysatorkonstruktion aus Au-Einzelatomen berichtet, die auf der Oberfläche von NDPCs dekoriert sind. Die Einführung von Au-Einzelatomen führt zu aktiven Reaktionsstellen, die durch die in NDPCs vorhandenen N-Spezies stabilisiert werden. So ermöglichte die Interaktion innerhalb von hergestellten AuSAs-NDPCs-Katalysatoren eine vielversprechende Leistung für die elektrochemische NRR. Für den Reaktionsmechanismus können Au-Einzelstandorte und N- oder C-Spezies als frustrierte Lewis-Paare (FLPs) fungieren, um den Elektronenabgabe- und Rückgabeprozess zur Aktivierung von N2-Molekülen zu verbessern. Diese Arbeit bietet neue Möglichkeiten für das Design von Katalysatoren, um eine effiziente N2-Fixierung unter Umgebungsbedingungen durch die Nutzung recycelter elektrischer Energie zu erreichen. Das letzte in Kapitel 5 beschriebene Thema konzentrierte sich hauptsächlich auf die Synthese von dualem heteroatomdotiertem porösem Kohlenstoff aus einfachen Vorläufern. Die Einführung von N- und B-Heteroatomen führt zur Konstruktion von N-B-Motiven und frustrierten Lewis-Paaren in einer mikroporösen Architektur, die ebenfalls reich an Punktdefekten ist. Dies kann die Adsorptionskraft verschiedener Reaktanden (N2 und HMF) und damit deren Aktivierung verbessern. Infolgedessen weist BNC-2 eine wünschenswerte elektrochemische NRR- und HMF-Oxidationsleistung auf. Gasadsorptionsexperimente wurden als einfaches Werkzeug zur Aufklärung des Zusammenhangs zwischen Struktur und katalytischer Aktivität eingesetzt. Diese Arbeit liefert neue und tiefe Einblicke in das rationale Design und den Ursprung der Aktivität bei metallfreien Elektrokatalysatoren und ermöglicht eine physikalisch tragfähige Diskussion der aktiven Motive, sowie die Suche nach deren weiteren Anwendungen. Während dieser Arbeit, die allgegenwärtigen Probleme der niedrigen Selektivität und Aktivität der elektrochemischen NRR werden durch die Gestaltung poröser Katalysatoren auf Kohlenstoffbasis mit hoher Effizienz und die Erforschung ihrer katalytischen Mechanismen. Die Struktur-Leistungsbeziehungen und Aktivierungsmechanismen der relativ inerten N2-Moleküle werden entweder durch experimentelle Ergebnisse oder DFT-Berechnungen aufgezeigt. Diese grundlegenden Erkenntnisse ebnen den Weg für ein zukünftiges optimales Design und eine gezielte Förderung von NRR-Katalysatoren mit poröser Kohlenstoffstruktur, sowie für die Untersuchung neuer N2-Aktivierungsmodi. KW - N2 fixation KW - porous carbon-based materials KW - ammonia KW - selectivity KW - N2-Fixierung KW - porösen Materialien auf Kohlenstoffbasis KW - Ammoniak KW - Selektivität Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-443397 ER -