TY - JOUR A1 - Mondal, Suvendu Sekhar A1 - Mueller, Holger A1 - Junginger, Matthias A1 - Kelling, Alexandra A1 - Schilde, Uwe A1 - Strehmel, Veronika A1 - Holdt, Hans-Jürgen T1 - Imidazolium 2-substituted 4,5-dicyanoimidazolate ionic liquids: synthesis, crystal structures and structure-thermal property relationships JF - Chemistry - a European journal N2 - Thirty six novel ionic liquids (ILs) with 1-butyl-3-methylimidazolium and 3-methyl-1-octylimidazolium cations paired with 2-substitited 4,5-dicyanoimidazolate anions (substituent at C2=chloro, bromo, methoxy, vinyl, amino, methyl, ethyl, propyl, isopropyl, butyl, pentyl, hexyl, heptyl, octyl, nonyl, decyl, undecyl and phenyl) have been synthesized and characterized by using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and single-crystal X-ray crystallography. The effects of cation and anion type and structure on the thermal properties of the resulting ionic liquids, including several room temperature ionic liquids (RTILs) are examined and discussed. ILs exhibited large liquid and crystallization ranges and formed glasses on cooling with glass transition temperatures in the range of -22 to -68 degrees C. The effects of alkyl substituents of the imidazolate anion reflected the crystallization, melting points and thermal decomposition of the ILs. The Coulombic packing force, van der Waals forces and size of the anions can be considered for altering the thermal transitions. Three crystal structures of the ILs were determined and the effects of changes to the cations and anions on the packing of the structure were investigated. KW - crystal structures KW - imidazole KW - ion exchange KW - ionic liquids KW - pi-pi stacking Y1 - 2014 U6 - https://doi.org/10.1002/chem.201304934 SN - 0947-6539 SN - 1521-3765 VL - 20 IS - 26 SP - 8170 EP - 8181 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Fischer, Sabrina A1 - Schmidt, Johannes A1 - Strauch, Peter A1 - Thomas, Arne T1 - An anionic microporous polymer network prepared by the polymerization of weakly coordinating anions JF - Angewandte Chemie : a journal of the Gesellschaft Deutscher Chemiker ; International edition KW - borates KW - conjugated microporous polymers KW - covalent organic frameworks KW - ion exchange KW - weakly coordinating ions Y1 - 2013 U6 - https://doi.org/10.1002/anie.201303045 SN - 1433-7851 SN - 1521-3773 VL - 52 IS - 46 SP - 12174 EP - 12178 PB - Wiley-VCH CY - Weinheim ER - TY - THES A1 - Niehus, Christina T1 - Untersuchungen zur Selektivität unterschiedlich substituierter Iminodiessigsäure-Ionenaustauscher gegenüber zweiwertigen Metallionen T1 - Research into the selectivity of iminodiacetat-ion-exchangers compared to bivalent metals N2 - Zur selektiven Entfernung von Schwermetallen aus industriellen Abwässern und Prozesslösungen der metallverarbeitenden Industrie werden synthetische metallkomplexierende funktionelle Polymere – mit Iminodiessigsäure (IDE) als aktive Spezies – seit Jahren erfolgreich zur Eliminierung störender Kationen eingesetzt. Ständig steigende Anforderungen an die Qualität der aufzubereitenden Wässer verlangen nach leistungsfähigen Selektivaustauschern, die den Erhalt der Eigenschaften von Prozesslösungen (z. B. pH-Wert, Salzgehalt) ermöglichen. Ziel der Untersuchungen war es, die strukturellen Matrixeinflüsse auf Beladung, Kapazität, Selektivität und Kinetik durch Variation der Matrix und der experimentellen Bedingungen näher zu untersuchen. Auf Basis einer monodispersen Erstsubstitution eines Styren-Divinylbenzen-Copolymerisates wurde durch gezielten Einbau funktioneller Gruppen – Synthese mit differenziertem Substitutionsgrad (TK/N 1-2) – versucht, systematisch den Einfluss des Substitutionsgrades der Matrix auf die Eigenschaften der Ionenaustauscher zu analysieren. Methodisch geordnet wurden zunächst die Versuche nach dem Batch- und anschließend nach dem Säulenverfahren durchgeführt und parallel dazu die Matrix charakterisiert. Das Verhalten der funktionellen Ankergruppen in Abhängigkeit vom pH-Wert der Lösung (pH-Bereich 2 - 5) wurde untersucht, der optimale Anreicherungs-pH-Wert, die maximale Beladung (Kapazität) und Selektivität der unterschiedlich substituierten Proben für die Schwermetall-Ionen Cu, Zn, Ni, Cd, Pb und Co ermittelt. Den statischen Versuchen folgten dynamische Untersuchungen im Säulenverfahren. Ziel war die Ermittlung des Durchbruchverhaltens und der Durchbruchkapazität bei optimalem pH-Wert in Abhängigkeit vom Substitutionsgrad gegenüber den Einzelmetallionen (Cu, Ni, Zn) und ausgewählten Paaren (Cu/Ni, Cu/Zn, Ni/Zn). Alle Ionenaustauscher wurden ausschließlich in der Ca-Form eingesetzt. N2 - Selective ion exchange offers a good solution for cleaning many waste streams. The aim of this study was to develop selective ion exchange materials for effective and economical applications in waste water treatment. The investigation of chelate resins is based on iminodiacetate with different secondary substitution (degree of substitution TK/N 1 - 2, from aminoacetic acid to iminodiacetate as functional group). As comparison the weak acid resin Lewatit TP 207 was used. The research focused on the application of selective ion exchange resins for waste effluents to ascertain the feasibility of a selective ion exchange process employing chelating cation exchangers for heavy metal removal. The metals of interest were copper (Cu), zinc (Zn), nickel (Ni), cobalt (Co), lead (Pb) and cadmium (Cd) and the resins appointed in the Ca-form. The batch operation was conducted to determine the equilibrium data and the operating resin capacity, one of the most important properties. The main equilibrium parameter affecting the ion exchange was the pH value (array 2-5). The best accumulation pH value was obtained using pH 5 for all metals. The only exception was lead with pH 3. After determining the viability of the different resins with batch systems, this study has focused on the column mode experiments. They were generated for the selected resins in the continuous ion exchange process which are essentially reserved for industrial applications. A practical application of the breakthrough curves is the determination of the breakthrough time which helps to find the best operating conditions. KW - Schwermetallentfernung KW - Ionenaustauscher KW - schwach saure Chelataustauscher KW - Lewatit TP 207 KW - heavy metal removal KW - ion exchange KW - chelating cation exchanger KW - weak acid resin KW - Lewatit TP 207 Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-13190 ER -