TY - THES A1 - Schimpf, Stefan T1 - Herkunft und Ablagerungsmilieu quartärer Sedimente im Einzugsgebiet des Heihe, NW China N2 - Der zentralasiatische Naturraum, wie er sich uns heute präsentiert, ist das Ergebnis eines Zusammenwirkens vieler verschiedener Faktoren über Jahrmillionen hinweg. Im aktuellen Kontext des Klimawandels zeigt sich jedoch, wie stark sich Stoffflüsse auch kurzfristig ändern und dabei das Gesicht der Landschaft verwandeln können. Die Gobi-Wüste in der Inneren Mongolei (China), als Teil der gleichnamigen Trockenregionen Nordwestchinas, ist aufgrund der Ausgestaltung ihrer landschaftsprägenden Elemente sowie ihrer Landschaftsdynamik, im Zusammenhang mit der Lage zum Tibet-Plateau, in den Fokus der klimageschichtlichen Grundlagenforschung gerückt. Als großes Langzeitarchiv unterschiedlichster fluvialer, lakustriner und äolischer Sedimente stellt sie eine bedeutende Lokalität zur Rekonstruktion von lokalen und regionalen Stoffflüssen dar.. Andererseits ist die Gobi-Wüste zugleich auch eine bedeutende Quelle für den überregionalen Staubtransport, da sie aufgrund der klimatischen Bedingungen insbesondere der Erosion durch Ausblasung preisgegeben wird. Vor diesem Hintergrund erfolgten zwischen 2011 und 2014, im Rahmen des BMBF-Verbundprogramms WTZ Zentralasien – Monsundynamik & Geoökosysteme (Förderkennzeichen 03G0814), mehrere deutsch-chinesische Expeditionen in das Ejina-Becken (Innere Mongolei) und das Qilian Shan-Vorland. Im Zuge dieser Expeditionen wurden für eine Bestimmung potenzieller Sedimentquellen erstmals zahlreiche Oberflächenproben aus dem gesamten Einzugsgebiet des Heihe (schwarzer Fluss) gesammelt. Zudem wurden mit zwei Bohrungen im inneren des Ejina-Beckens, ergänzende Sedimentbohrkerne zum bestehenden Bohrkern D100 (siehe Wünnemann (2005)) abgeteuft, um weit reichende, ergänzende Informationen zur Landschaftsgeschichte und zum überregionalen Sedimenttransfer zu erhalten. Gegenstand und Ziel der vorliegenden Doktorarbeit ist die sedimentologisch-mineralogische Charakterisierung des Untersuchungsgebietes in Bezug auf potenzielle Sedimentquellen und Stoffflüsse des Ejina-Beckens sowie die Rekonstruktion der Ablagerungsgeschichte eines dort erbohrten, 19m langen Sedimentbohrkerns (GN100). Schwerpunkt ist hierbei die Klärung der Sedimentherkunft innerhalb des Bohrkerns sowie die Ausweisung von Herkunftssignalen und möglichen Sedimentquellen bzw. Sedimenttransportpfaden. Die methodische Herangehensweise basiert auf einem Multi-Proxy-Ansatz zur Charakterisierung der klastischen Sedimentfazies anhand von Geländebeobachtungen, lithologisch-granulometrischen und mineralogisch-geochemischen Analysen sowie statistischen Verfahren. Für die mineralogischen Untersuchungen der Sedimente wurde eine neue, rasterelektronenmikroskopische Methode zur automatisierten Partikelanalyse genutzt und den traditionellen Methoden gegenübergestellt. Die synoptische Betrachtung der granulometrischen, geochemischen und mineralogischen Befunde der Oberflächensedimente ergibt für das Untersuchungsgebiet ein logisches Kaskadenmodell mit immer wiederkehrenden Prozessbereichen und ähnlichen Prozesssignalen. Die umfangreichen granulometrischen Analysen deuten dabei auf abnehmende Korngrößen mit zunehmender Entfernung vom Qilian Shan hin und ermöglichen die Identifizierung von vier texturellen Signalen: den fluvialen Sanden, den Dünensanden, den Stillwassersedimenten und Stäuben. Diese Ergebnisse können als Interpretationsgrundlage für die Korngrößenanalysen des Bohrkerns genutzt werden. Somit ist es möglich, die Ablagerungsgeschichte der Bohrkernsedimente zu rekonstruieren und in Verbindung mit eigenen und literaturbasierten Datierungen in einen Gesamtkontext einzuhängen. Für das Untersuchungsgebiet werden somit vier Ablagerungsphasen ausgewiesen, die bis in die Zeit des letzten glazialen Maximums (LGM) zurückreichen. Während dieser Ablagerungsphasen kam es im Zuge unterschiedlicher Aktivitäts- und Stabilitätsphasen zu einer kontinuierlichen Progradation und Überprägung des Schwemmfächers. Eine besonders aktive Phase kann zwischen 8 ka und 4 ka BP festgestellt werden, während der es aufgrund zunehmender fluvialer Aktivitäten zu einer deutlich verstärkten Schwemmfächerdynamik gekommen zu sein scheint. In den Abschnitten davor und danach waren es vor allem äolische Prozesse, die zu einer Überprägung des Schwemmfächers geführt haben. Hinsichtlich der mineralogischen Herkunftssignale gibt es eine große Variabilität. Dies spiegelt die enorme Heterogenität der Geologie des Untersuchungsgebietes wider, wodurch die räumlichen Signale nicht sehr stark ausgeprägt sind. Dennoch, können für das Einzugsgebiet drei größere Bereiche deklariert werden, die als Herkunftsgebiet in Frage kommen. Das östliche Qilian Shan Vorland zeichnet sich dabei durch deutlich höhere Chloritgehalte als primäre Quelle für die Sedimente im Ejina-Becken aus. Sie unterscheiden sich insbesondere durch stark divergierende Chloritgehalte in der Tonmineral- und Gesamtmineralfraktion, was das östliche Qilian Shan Vorland als primäre Quelle für die Sedimente im Ejina-Becken auszeichnet. Dies steht in Zusammenhang mit den Grünschiefern, Ophioliten und Serpentiniten in diesem Bereich. Geochemisch deutet vor allem das Cr/Rb-Verhältnis eine große Variabilität innerhalb des Einzugsgebietes an. Auch hier ist es das östliche Vorland, welches aufgrund seines hohen Anteils an mafischen Gesteinen reich an Chromiten und Spinellen ist und sich somit vom restlichen Untersuchungsgebiet abhebt. Die zeitliche aber auch die generelle Variabilität der Sedimentherkunft lässt sich in den Bohrkernsedimenten nicht so deutlich nachzeichnen. Die mineralogisch-sedimentologischen Eigenschaften der erbohrten klastischen Sedimente zeugen zwar von zwischenzeitlichen Änderungen bei der Sedimentherkunft, diese sind jedoch nicht so deutlich ausgeprägt, wie es die Quellsignale in den Oberflächensedimenten vermuten lassen. Ein Grund dafür scheint die starke Vermischung unterschiedlichster Sedimente während des Transportes zu sein. Die Kombination der Korngrößenergebnisse mit den Befunden der Gesamt- und Schwermineralogie deuten darauf hin, dass es zwischenzeitlich eine Phase mit überwiegend äolischen Prozessen gegeben hat, die mit einem Sedimenteintrag aus dem westlichen Bei Shan in Verbindung stehen. Neben der Zunahme ultrastabiler Schwerminerale wie Zirkon und Granat und der Abnahme opaker Schwerminerale, weisen vor allem die heutigen Verhältnisse darauf hin. Der Vergleich der traditionellen Schwermineralanalyse mit der Computer-Controlled-Scanning-Electron-Microscopy (kurz: CCSEM), die eine automatisierte Partikelauswertung der Proben ermöglicht, zeigt den deutlichen Vorteil der modernen Analysemethode. Neben einem zeitlichen Vorteil, den man durch die automatisierte Abarbeitung der vorbereiteten Proben erlangen kann, steht vor allem die deutlich größere statistische Signifikanz des Ergebnisses im Vordergrund. Zudem können mit dieser Methode auch chemische Varietäten einiger Schwerminerale bestimmt werden, die eine noch feinere Klassifizierung und sicherere Aussagen zu einer möglichen Sedimentherkunft ermöglichen. Damit ergeben sich außerdem verbesserte Aussagen zu Zusammensetzungen und Entstehungsprozessen der abgelagerten Sedimente. Die Studie verdeutlicht, dass die Sedimentherkunft innerhalb des Untersuchungsgebietes sowie die ablaufenden Prozesse zum Teil stark von lokalen Gegebenheiten abhängen. Die Heterogenität der Geologie und die Größe des Einzugsgebietes sowie die daraus resultierende Komplexität der Sedimentgenese, machen exakte Zuordnungen zu klar definierten Sedimentquellen sehr schwer. Dennoch zeigen die Ergebnisse, dass die Sedimentzufuhr in das Ejina-Becken in erster Linie durch fluviale klastische Sedimente des Heihe aus dem Qilian Shan erfolgt sein muss. Die Untersuchungsergebnisse zeigen jedoch ebenso die Notwendigkeit einer ergänzenden Bearbeitung angrenzender Untersuchungsgebiete, wie beispielsweise den Gobi-Altai im Norden oder den Beishan im Westen, sowie die Verdichtung der Oberflächenbeprobung zur feineren Auflösung von lokalen Sedimentquellen. N2 - The Central Asian natural space, as it presents itself today, is the result of a combination of many different factors over millions of years. However, in the current context of climate change it becoming obvious how strongly material fluxes can change in the short-term and thereby transform the face of the landscape. As a large long-term archive of different fluvial, lacustrine and aeolian sediments, the Gobi Desert in Inner Mongolia (China) represents a significant locality for the reconstruction of local and regional material flows as well as an important source for supra-regional dust transport due to erosion by aeolian processes. This, in connection with its location to the Tibetan Plateau, has moved the Gobi Desert into the focus of climate-historical basic research. Against this background, several German-Chinese expeditions to Ejina Basin (Inner Mongolia) and the Qilian Shan foreland were accomplished between 2011 and 2014. They were part of the BMBF joint program WTZ Central Asia - Monsoon Dynamics & Geo-Ecosystems (Grant No. 03G0814). In the course of these expeditions numerous surface samples from the entire catchment area of the Heihe (Black River) were collected for the determination of potential sediment sources. Additionally, two drillings in the interior of the Ejina Basin were conducted as a continuation of the existing drill-core D100 (see Wünnemann (2005)) and for gathering complementary information on landscape history and supra-regional sediment transfer. The goals of this doctoral thesis are a sedimentological-mineralogical characterization of the study area with regard to potential sediment sources and material fluxes of the Ejina Basin as well as the reconstruction of the sedimentation history of a 19 m sediment drill-core (GN100) drilled in the northern part of the basin. The main focus is on the clarification of the sediment provenance within the drill core as well as the designation of provenance signals and possible sediment sources or sediment transport paths. The methodological approach is based on a multi-proxy approach to characterize the clastic sedimentary facies using field observations, lithological-granulometric and mineralogical-geochemical analyses as well as statistical methods. For the mineralogical investigations of the sediments, a new scanning electron microscopic method for automated particle analysis was used and compared with traditional methods. The synoptic analysis of the granulometric, geochemical and mineralogical findings of the surface sediments result in a logical cascade model with recurring process areas and similar process signals. The results of the extensive granulometric analyses indicate decreasing grain sizes as the distance from the Qilian Shan increases and allow the identification of four textural signals: fluvial sands, dune sands, still water sediments and dusts. They can be used as the basis of interpretation for the grain size analyses of the drill core. This makes it possible to reconstruct the depositional history of the core sediments and to put them in an overall context in conjunction with own and literature-based datings. For the study area four depositional phases can be identified which date back until the time of the Last Glacial Maximum (LGM). During these depositional phases, various phases of activity and stability led to a continuous progradation and overprinting of the alluvial fan. A particularly active phase can be observed between 8 ka and 4 ka BP. During this period there seems to have been a significant increase in alluvial fan dynamics due to increasing fluvial activity. In the periods before and after mainly aeolian processes have led to an overprinting of the alluvial fan. Regarding the mineralogical provenance signals there is a great variability. This reflects the enormous geological heterogeneity of the study area, by which the spatial signals are not very pronounced. Nonetheless, within the catchment three larger areas can be declared which can be considered as possible sediment sources. These are the eastern and western foreland of the Qilian Shan mountains as wells as the Bei Shan in the west of the Ejina basin. They differ, in particular, from strongly diverging chlorite contents in the clay mineral and total mineral fraction. The eastern Qilian Shan foreland is characterized by significantly higher chlorite contents as the primary source for the sediments in the Ejina Basin. This is related to the greenschists, ophiolites and serpentinites in this area. Geochemically, the Cr/Rb-ratio in particular indicates a large variability within the catchment area. In this case its again the eastern Qilian Shan foreland which stands out from the rest of the study area with high values due to its high proportion of mafic rocks which are rich in chromites and spinels. Within the drill core sediments of GN100 the temporal but also the general variability of the sediment provenance according to the surface sediment results cannot be clearly traced. The mineralogical-sedimentological characteristics of the drilled clastic sediments exhibit meantime changes in sediment provenance. However, they are not as pronounced as the source signals within the surface sediments suggest. One reason seems to be the strong mixing of different sediments during transport. The combination of the particle size results with the results of the total and heavy mineralogy indicate that there must have been a phase in the meantime with predominantly aeolian processes.. These processes were connected with a sediment input from the Bei Shan mountains in the west. In addition to the increase in ultrastable heavy minerals such as zirconium and garnet and the decline of opaque heavy minerals, mainly present conditions point to this. The comparison of the traditional heavy mineral analysis (polarized light microscopy) with computer-controlled scanning electron microscopy (short: CCSEM) shows the clear advantage of the modern analysis method. Above all is the significant greater statistical significance of the counting results. In addition, this method can also be used to determine chemical varieties of some heavy minerals, which allows an even finer classification and more reliable conclusions about a possible sediment provenance. Furthermore, better statements can be made about the composition and the development process of the deposited sediments. This thesis shows that the sediment provenance within the study area as well as the ongoing processes partly depend strongly on local conditions. Therefore, the heterogeneity of the geology and the size of the catchment as well as the resulting complexity of the sediment genesis makes it very difficult to make exact assignments to clearly defined sediment sources. Nevertheless, the results indicate a primary input of fluvial clastic sediments of the Heihe coming from the Qilian Shan mountains. However, the findings also indicate the need to complement the study with adjacent study areas such as the Gobi Altai in the north or the Beishan in the west as well as a densification of the surface sampling for a better resolution of possible local sediment sources. KW - Heihe KW - Ejina Becken KW - Gaxun Nur KW - Schwerminerale KW - China KW - CCSEM KW - Herkunftsanalyse KW - Tonminerale KW - Heihe KW - Ejina Basin KW - Gaxun Nur KW - Heavy Minerals KW - China KW - CCSEM KW - Provenance Analysis KW - Clay Minerals Y1 - 2020 ER - TY - THES A1 - Caesar, Levke T1 - The evolution of the Atlantic Meridional Overturning Circulation and its implications for surface warming N2 - The Atlantic Meridional Overturning Circulation (AMOC) is likely the most well-known system of ocean currents on Earth, redistributing heat, nutrients and carbon over a large part of the Earth’s surface and affecting global climate as a result. Due to enhanced freshwater fluxes into the subpolar North Atlantic as a response to global warming, the AMOC is expected, and may have already started, to weaken and these changes will likely have global impacts. It is therefore of considerable relevance to improve our understanding of past and future AMOC changes. My thesis tries to answer some of the open questions in this field by giving strong evidence that the AMOC has already weakened over the last century, by narrowing future projections of this slowdown and by studying the impacts on global surface warming. While there have been various studies trying to reconstruct the strength of the overturning circulation in the past, often based on model simulations in combination with observations (Jackson et al., 2016, Kanzow et al., 2010) or proxies (Frajka-Williams, 2015, Latif et al., 2006), the results so far, due to lack of direct measurements, have been inconclusive. In the first paper I build on previous work that links the anomalously low sea surface temperatures (SSTs) in the North Atlantic with the reduced meridional heat transport due to a weaker AMOC. Using the output of a high-resolution global climate model, I derive a characteristic spatial and seasonal SST fingerprint of an AMOC slowdown and an improved SST-based AMOC index. The same fingerprint is seen in the observational SSTs since the late 19th Century, giving strong evidence that since then the AMOC has slowed down. In addition, the reconstruction of the historical overturning strength with the new AMOC index agrees well with and extends the results of earlier studies as well as the direct measurements from the RAPID project and shows a strong decline of the AMOC by about 15% (3±1 Sv) since the mid-20th Century (Caesar et al., 2018). The reconstruction of the historical overturning strength with the AMOC index enables us to weight future AMOC projections based on their skill in modeling the historical AMOC as described in the second paper of this thesis (Olson et al., 2018). Using Bayesian model averaging we considerably narrow the projections of the CMIP5 ensemble to a decrease of -4.0 Sv and -6.8 Sv between the years 1960-1999 and 2060-2099 for the RCP4.5 and RCP8.5 emission scenarios, respectively. These values fit to, yet are at the lower end of, previously published estimates. In the third paper I examine how the AMOC slowdown affects the global mean surface temperature (GMST) with a focus on how it will change the ocean heat uptake (OHC). Accounting for the effect of changes in the radiative forcing on the GMST, I test how AMOC variations correlate with the residual part of surface temperature changes in the past. I find that the correlation is positive which fits the understanding that the deep-water formation that is important in driving the AMOC cools the deep ocean and therefore warms the surface (Caesar et al., 2019). The future weakening of the overturning circulation could therefore delay global surface warming. Due to nonlinear behavior and scale specific changes it can be difficult to study the dominant processes and modes that drive climate variability. In the fourth paper we develop and test a new technique based on the wavelet multiscale correlation (WMC) similarity measure to study climate variability on different temporal and spatial scales (Agarwal et al., 2018). In a fifth contribution to my thesis this method is applied to the observed sea surface temperatures. The results reconfirm well-known relations between SST anomalies such as the El Niño-Southern Oscillation (ENSO) and the Pacific Decadal Oscillation (PDO) on inter-annual and decadal timescales, respectively. They furthermore give new insights into the characteristics and origins of long-range teleconnections, for example, that the teleconnection between ENSO and Indian Ocean dipole exist mainly between the northern part of the ENSO tongue and the equatorial Indian Ocean, and provides therefore valuable knowledge about the regions that are necessary to include when modeling regional climate variability at a certain scale (Agarwal et al., 2019). In summary, my PhD thesis investigates past and future AMOC variability and its effects on global mean surface temperature by utilizing a combination of observational sea surface data and the output of historical and future climate model simulations from both the high-resolution CM2.6 model as well as the CMIP5 ensemble. It further includes the development and validation of a new method to study climate variability, that, applied to the observed sea surface temperatures, gives new insight about teleconnections in the Earth System. My findings provide evidence that the AMOC has already slowed down, will continue to do so in the future, and will impact the global mean temperature. Further impacts of an AMOC slowdown may include increased sea-level rise at the U.S. east coast (Ezer, 2015), heat extremes in Europe (Duchez et al., 2016) and increased storm activity in the North Atlantic region (Jackson et al., 2015), all of which have significant socio-economic implications. KW - Climate Change KW - Ocean Circulation KW - AMOC Y1 - 2019 CY - Potsdam ER - TY - THES A1 - Maerz, Sven T1 - Analyzing pore systems through comprehensive digital image analysis (DIA) T1 - Analyse von Porensystemen durch umfassende digitale Bildanalyse (DIA) BT - quantifying pore type geometry, detecting effective porosity and reconstructing pore system evolution BT - Quantifizierung der Geometrie von Porentypen, Erfassung der effektiven Porosität und Rekonstruktion der Porenraumentwicklung N2 - Carbonates tend to have complex pore systems which are often composed of distinct assemblages of genetically and geometrically different pore types at various scales (e.g., Melim et al., 2001; Lee et al., 2009; He et al., 2014; Dernaika & Sinclair, 2017; Zhang et al., 2017). Such carbonate-typical multimodal pore systems are the result of both primary depositional processes and multiple stages of postdepositional modifications, causing small-scale heterogeneities in pore system properties and leading to the co-occurrence of both effective and ineffective pore types. These intrinsic variations in pore type effectiveness are the main reason for the often low correlation between porosity and permeability in carbonate pore systems (e.g., Mazzullo 2004; Ehrenberg & Nadeau, 2005; Hollis et al., 2010; He et al., 2014; Rashid et al., 2015; Dernaika & Sinclair, 2017), as it is also true for the marginal lacustrine carbonates studied in this thesis. However, by extracting interconnected and thus effective pore types, and simultaneously excluding isolated and ineffective pores, the understanding and prediction of permeability for given porosity can be highly enhanced (e.g., Melim et al., 2001; Zhang et al., 2017). In this thesis, a step-by-step workflow based on digital image analysis (DIA) is presented and performed on 32 facies-representative samples of marginal lacustrine carbonates from the Middle Miocene Nördlinger Ries crater lake (Southern Germany), resulting in 77 mean values of pore type effectiveness which are based on 23,508 individual pore geometry data. By using pore shape factor γ (sensu Anselmetti et al., 1998) as a parameter to quantitatively describe pore shape complexity and therefore pore interconnectivity, the potential contribution (Kcontr.) of each pore type to total permeability (Ktotal) is calculated, and the most effective pore types are then identified. As a result, primary interpeloidal pores and secondary vugs are the most effective pore types in the studied marginal lacustrine succession, mainly due to their generally big size and complex shape, leading to an excellent interconnection between both pore types and consequently to the establishment of a highly effective pore network. Both pore types together compose the pore system of the peloidal grainstone facies. Therefore, this lithofacies type has been identified as the sedimentary facies with highest porosity-permeability properties in this marginal lacustrine succession. By applying the DIA-based method to 23 additional samples from the studied outcrop which all show extensive partial to complete cementation of preexisting pores, the impact of cementation on pore geometry and therefore on porosity and permeability is quantified. This results in a cementation reduction value for each relevant parameter which can then be used to enhance precision of predicting porosity and permeability within the studied succession. Furthermore, the concept of using pore shape complexity as a proxy parameter for pore system effectiveness is tested by applying an independent method (i.e., fluid flow simulation) to the dataset. DIA is then used once again to evaluate the outcome of fluid flow simulation. The results confirm the previous findings that interpeloidal pores and vugs together build up the most effective pore system in the Ries lake carbonates. Finally, the extraction of the interconnected (i.e., effective) pore network leads to an improved correlation between porosity and permeability within the studied carbonates. The step-by-step workflow described in this thesis provides a quantitative petrographic method to identify and extract effective porosity from the pore system, which is crucial for understanding how carbonate pore systems generate permeability. This thesis also demonstrates that pore shape complexity is the most important geometrical parameter controlling pore interconnection and consequently the formation of effective porosity. It further emphasizes that pore shape factor γ (sensu Anselmetti et al. 1998) is a very robust and scale-independent proxy parameter to quantify pore type effectiveness. Additionally, DIA proves to be an ideal tool to directly link porosity and permeability to their mutual origin: the rock fabric and associated pore structure. N2 - Der Porenraum eines Karbonatgesteins ist zumeist aus einer spezifischen Vergesellschaftung verschiedenster Porentypen aufgebaut, die eine unterschiedliche Herkunft aufweisen und zusätzlich in ihrer Form und Größe stark variieren können (e.g., Melim et al., 2001; Lee et al., 2009; He et al., 2014; Dernaika & Sinclair, 2017; Zhang et al., 2017). Diese für Karbonate typischen multimodalen Porensysteme entstehen sowohl durch primäre Ablagerungsprozesse, als auch durch mehrmalige Modifikation des Porenraumes nach Ablagerung des Sediments. Dies führt zu einer ungleichen Verteilung der Porenraumeigenschaften auf engstem Raum und das zeitgleiche Auftreten von effektiven und ineffektiven Poren. Diese immanenten Unterschiede in der Effektivität einzelner Porentypen sind der Hauptgrund für die häufig sehr niedrige Korellation zwischen Porosität und Permeabilität in Karbonaten (e.g., Mazzullo 2004; Ehrenberg & Nadeau, 2005; Hollis et al., 2010; He et al., 2014; Rashid et al., 2015; Dernaika & Sinclair, 2017). Durch die Extraktion von miteinander verbundenen und somit effektiven Porentypen jedoch kann das Verständnis und die Vorhersage der Permeabilität für einen gegeben Porositätswert stark verbessert werden (e.g., Melim et al., 2001; Zhang et al., 2017). Dazu wird in dieser Arbeit eine auf der digitalen Bildanalyse (DIA) beruhende Methode vorgestellt, mit der schrittweise die Effektivität von Poren aus den analysierten mittelmiozänen lakustrinen Karbonaten des Nördlinger Ries Kratersees (Süddeutschland) berechnet werden kann. Mithilfe des Porenformfaktors  (sensu Anselmetti et al., 1998), der als Parameter zur Quantifizierung der Interkonnektivität zwischen Poren dient, wird der potentiellen Beitrag an Permeabilität jedes Porentyps zur Gesamtpermeabilität bestimmt. Somit können die effektivsten Porentypen innerhalb der analysierten Karbonate identifiziert werden. Desweiteren wird die digitale Bildanalyse dazu benutzt, zementierte Porenräume zu extrahieren, um den Einfluss der Zementation auf die Porenraumeigenschaften zu quantifizieren. Durch eine unabhängige Methode (Fluid-Flow-Simulation), deren Ergebnisse wiederum mit der digitalen Bildanalyse ausgewertet werden, können die vorherigen Erkentnisse bestätigt werden: Interpeloidale Poren und Lösungsporen sind die beiden effektivsten Porentypen im Porenraum der Riesseekarbonate. Die Extraktion des miteinander verbundenen (d.h. effektiven) Porennetzwerkes führt schließlich zu einer erheblich verbesserten Korrelation zwischen Porosität und Permeabilität in den analysierten Karbonaten. Die in dieser Arbeit beschriebene Methode bietet ein quantitatives petrographisches Werkzeug, mit dessen Hilfe die effektive Porosität eines Porenraumes extrahiert werden kann. Dies führt zu einem besseren Verständnis darüber, wie Porensysteme von Karbonaten Permeabilität erzeugen. Diese Dissertation zeigt auch, dass die Formkomplexität von Poren einer der wichtigsten Parameter ist, der die Interkonnektivität zwischen einzelnen Poren und somit die Entstehung von effektiver Porosität steuert. Außerdem erweist sich die digitale Bildanalyse als ausgezeichnetes Werkzeug um die Porosität und Permeabilität direkt an ihren gemeinsamen Ursprung zu knüpfen: die Gesteinstextur und die damit assoziierte Porenstruktur. KW - digital image analysis KW - digitale Bildanalyse KW - effective porosity KW - effektive Porosität KW - carbonate pore types KW - Porentypen in Karbonate Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-445880 ER - TY - THES A1 - Besendörfer, Christian René T1 - Innovationen im nachhaltigen Landmanagement BT - Sichtweisen, Prozesse und Unterstützungsmöglichkeiten Y1 - 2018 ER - TY - THES A1 - Ramage, Justine Lucille T1 - Impact of Hillslope Thermokarst on the Nearshore Carbon Budget Along the Yukon Coast, Canada N2 - In ice-rich permafrost regions, changes in the permafrost thermal regime cause surface disturbances. These changes are amplified by the increase in air temperatures recorded in the Arctic in the past decades. Thermokarst is a process that leads to surface subsidence and formation of characteristic landforms following thawing of ice-rich permafrost or melting of massive ice. Thermokarst is widespread on hillslopes and the number of associated landforms is increasing in the Arctic. Through this process large amounts of material are eroded and transported to the sea or accumulate along hillslopes. While hillslope thermokarst modifies terrestrial and aquatic ecosystems, there is limited understanding of its environmental impact at a regional scale. In this thesis we quantify the environmental impacts of hillslope thermokarst on the valley and nearshore ecosystems along the Yukon Coast, Canada. Using supervised machine learning, we identified geomorphic factors that favour the development of coastal retrogressive thaw slump (RTS), one of the most dynamic hillslope thermokarst landform. Coastal geomorphology and ground ice type and content play a major role in RTS occurrence. Using aerial photographs and satellite imagery, we traced the evolution of RTSs between 1952 and 2011. During this time, the number and areal coverage of RTSs increased by 73%. RTSs eroded and partly released to the nearshore zone organic carbon contained in millions of cubic meters of material. Our results show that 56% of the RTSs identified along the coast in 2011 have eroded 16.6 × 10^6 m3 of material; a large part (45%) was transported alongshore due to coastal processes. Moreover, we show that RTSs are a major contributor to the carbon budget in the nearshore ecosystem: 17% of the coastal RTSs identified in 2011 contributed annually up to 0.6% of the organic carbon released by coastal retreat along the Yukon Coast. To assess the impact of hillslope thermokarst on the terrestrial ecosystem, we measured the spatial distribution of soil organic carbon (SOC) and total nitrogen (TN) along hillslopes in three Arctic valleys. We highlight the high spatial variability in the distribution of SOC and TN in the valleys. This distribution is caused by complex soil processes occurring along the hillslopes. Hillslope thermokarst impacts the degradation of organic matter and affects the storage of SOC and TN. N2 - Veränderungen im thermalen Regime des Permafrosts verursachen Störungen der Erdoberfläche. Diese Veränderungen werden durch die in der Arktis seit Jahrzehnten ansteigenden Temperaturen verstärkt. Thermokarst ist ein Prozess, welcher die Erdoberfläche durch Schmelzen von Grundeis, oder Auftauen von Permafrost absacken lässt, wodurch charakteristische Landformen entstehen. Thermokarst ist vor allem entlang von Hängen weit verbreitet und die Anzahl der damit verbundenen Landformen in der Arktis steigt stetig an. Dieser Prozess mobilisiert große Mengen an Material, welche in Richtung Meer transportiert oder entlang von Hängen akkumuliert werden. Während entlang von Hängen auftretender Thermokarst terrestrische sowie aquatische Ökosysteme stark verändert, ist dessen Einfluss auf regionaler Skala zurzeit noch Gegenstand der Forschung. In dieser Arbeit quantifizieren wir die Auswirkungen von Thermokarstprozessen entlang von Hängen auf die umliegenden Ökosysteme der küstennahen Täler und Nahküstenbereiche entlang der Yukon Küste in Kanada. Mittels überwachtem maschinellen Lernen haben wir geomorphische Faktoren identifiziert, welche die Entwicklung von retrogressiven Auftaurutschungen (RTS) begünstigen. RTS sind eine Erscheinungsform von Thermokarst entlang von Hängen. Die Küstengeomorphologie, sowie der Grundeistyp und -inhalt sind die wesentlichen bestimmenden Faktoren für das Auftreten von RTS. Wir haben Luftbildaufnahmen und Satellitenbilder genutzt, um die Evolution von RTS im Zeitraum von 1952 bis 2011 zu verfolgen. Während dieser Zeit ist die Anzahl und Ausdehnung von RTS linear angestiegen. Wir zeigen, dass 56% der RTS welche entlang der Küste in 2011 identifiziert wurden, 16.6 × 106 m3 an Material erodiert haben. Hiervon wurden 45% durch Küstenprozesse entlang der Küste transportiert. RTS tragen wesentlich zu dem Kohlenstoff-Budget des Nahküstenbereiches bei: 17% der in 2011 identifizierten RTS, haben 0.6% des organischen Kohlenstoffes transportiert, welcher durch Küstenerosion entlang der Yukon Küste jährlich freigesetzt wird. Um den Einfluss von Thermokarst entlang von Hängen auf das terrestrische Ökosystem zu beurteilen, haben wir die räumliche Verteilung von organischem Bodenkohlenstoff und Stickstoff (SOC, TN) entlang von Hangprofilen in drei arktischen Tälern analysiert.Wir weisen auf eine hohe räumliche Variabilität in der Verteilung von SOC und TN hin, welche auf komplexe Bodenprozesse zurückzuführen ist, welche entlang von Hängen auftreten. Thermokarst entlang von Hängen hat einen großen Einfluss auf die Degradierung von organischem Material und die Speicherung von SOC und TN. N2 - Le changement climatique est la cause de la dégradation rapide du pergélisol à travers les régions arctiques et subarctiques. Cette dégradation s’exprime par des changements dans la taille, l’abondance et la structure des glissements rétrogressifs dus au dégel (GRD) et autres processus de pente thermokarstiques. Ces processus d’érosion des pentes contribuent au transport de sédiments vers l’Océan Arctique. Bien que l’impact des processus thermokarstiques sur les écosystèmes terrestres et aquatiques soit reconnu, il n’y a toujours pas d’étude qui quantifie leurs impacts sur les écosystèmes côtiers de l’Arctique. Dans cette thèse, nous quantifions les impacts des thermokarstes de pente dans les vallées et le long de la côte du Yukon, Canada. Nous avons utilisé des méthodes statistiques telles que les arbres de classification et les régressions logistiques pour identifier les facteurs qui favorisent le développement des GRD, un des modelés de dégradation du pergélisol le plus actif. La géomorphologie côtière ainsi que la nature et la quantité de glace dans le sol jouent un rôle prépondérant dans le développement des GRD. En utilisant des images satellite et des photos aériennes, nous avons suivi l’évolution des glissements rétrogressifs dus au dégel entre 1952 et 2011. Sur cette période, le nombre et l’étendue des GRD ont augmenté de 73% le long de la côte du Yukon. Les GRD ont érodé et partiellement relâché dans l’océan du carbon organic contenu dans des millions de mètres cubes de sédiments. Nos résultats montrent que 56% des GRD identifiés le long de la côte en 2011 ont érodé 16.6 × 106 m3 de sédiments; 45% a été transporté dans l’océan. De plus, notre étude montre que les GRD ont un rôle majeur sur le budget du carbone dans les milieux côtiers : 17% des GRD identifiés en 2011 ont relâché 0.6% du carbone érodé annuellement du fait de l’érosion côtière. Nous avons aussi étudié la dégradation du pergélisol le long des pentes des vallées périglaciaires, dans l’objectif de comprendre leurs impacts sur les sols et sur les stocks de carbone et d’azote. Nos résultats montrent qu’il y a une grande variabilité dans la distribution du carbone et de l’azote dans les vallées. Ces disparités sont causées par de complexes processus thermiques au niveau des sols. Les processus de pente thermokarstiques ont un impact important sur la dégradation de la matière organique dans les sols et affectent le stockage du carbone et de l’azote dans les régions Arctiques de pergélisol. KW - permafrost KW - thermokarst KW - soil organic carbon KW - retrogressive thaw slump KW - thermoerosion KW - carbon budget KW - Permafrost KW - thermokarst KW - Bodenkohlenstoff KW - retrogressiven Auftaurutschungen KW - thermoerosion KW - Kohlenstoff-Budget Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-421867 ER - TY - THES A1 - Wolf, Julia T1 - Schadenserkennung in Beton durch Überwachung mit eingebetteten Ultraschallprüfköpfen T1 - Monitoring with embedded ultrasound sensors to detect damage in concrete N2 - Die zerstörungsfreien Prüfungen von Bauwerken mit Hilfe von Ultraschallmessverfahren haben in den letzten Jahren an Bedeutung gewonnen. Durch Ultraschallmessungen können die Geometrien von Bauteilen bestimmt sowie von außen nicht sichtbare Fehler wie Delaminationen und Kiesnester erkannt werden. Mit neuartigen, in das Betonbauteil eingebetteten Ultraschallprüfköpfen sollen nun Bauwerke dauerhaft auf Veränderungen überprüft werden. Dazu werden Ultraschallsignale direkt im Inneren eines Bauteils erzeugt, was die Möglichkeiten der herkömmlichen Methoden der Bauwerksüberwachung wesentlich erweitert. Ein Ultraschallverfahren könnte mit eingebetteten Prüfköpfen ein Betonbauteil kontinuierlich integral überwachen und damit auch stetig fortschreitende Gefügeänderungen, wie beispielsweise Mikrorisse, registrieren. Sicherheitsrelevante Bauteile, die nach dem Einbau für Messungen unzugänglich oder mittels Ultraschall, beispielsweise durch zusätzliche Beschichtungen der Oberfläche, nicht prüfbar sind, lassen sich mit eingebetteten Prüfköpfen überwachen. An bereits vorhandenen Bauwerken können die Ultraschallprüfköpfe mithilfe von Bohrlöchern und speziellem Verpressmörtel auch nachträglich in das Bauteil integriert werden. Für Fertigbauteile bieten sich eingebettete Prüfköpfe zur Herstellungskontrolle sowie zur Überwachung der Baudurchführung als Werkzeug der Qualitätssicherung an. Auch die schnelle Schadensanalyse eines Bauwerks nach Naturkatastrophen, wie beispielsweise einem Erdbeben oder einer Flut, ist denkbar. Durch die gute Ankopplung ermöglichen diese neuartigen Prüfköpfe den Einsatz von empfindlichen Auswertungsmethoden, wie die Kreuzkorrelation, die Coda-Wellen-Interferometrie oder die Amplitudenauswertung, für die Signalanalyse. Bei regelmäßigen Messungen können somit sich anbahnende Schäden eines Bauwerks frühzeitig erkannt werden. Da die Schädigung eines Bauwerks keine direkt messbare Größe darstellt, erfordert eine eindeutige Schadenserkennung in der Regel die Messung mehrerer physikalischer Größen die geeignet verknüpft werden. Physikalische Größen können sein: Ultraschalllaufzeit, Amplitude des Ultraschallsignals und Umgebungstemperatur. Dazu müssen Korrelationen zwischen dem Zustand des Bauwerks, den Umgebungsbedingungen und den Parametern des gemessenen Ultraschallsignals untersucht werden. In dieser Arbeit werden die neuartigen Prüfköpfe vorgestellt. Es wird beschrieben, dass sie sich, sowohl in bereits errichtete Betonbauwerke als auch in der Konstruktion befindliche, einbauen lassen. Experimentell wird gezeigt, dass die Prüfköpfe in mehreren Ebenen eingebettet sein können da ihre Abstrahlcharakteristik im Beton nahezu ungerichtet ist. Die Mittenfrequenz von rund 62 kHz ermöglicht Abstände, je nach Betonart und SRV, von mindestens 3 m zwischen Prüfköpfen die als Sender und Empfänger arbeiten. Die Empfindlichkeit der eingebetteten Prüfköpfe gegenüber Veränderungen im Beton wird an Hand von zwei Laborexperimenten gezeigt, einem Drei-Punkt-Biegeversuch und einem Versuch zur Erzeugung von Frost-Tau-Wechsel Schäden. Die Ergebnisse werden mit anderen zerstörungsfreien Prüfverfahren verglichen. Es zeigt sich, dass die Prüfköpfe durch die Anwendung empfindlicher Auswertemethoden, auftretende Risse im Beton detektieren, bevor diese eine Gefahr für das Bauwerk darstellen. Abschließend werden Beispiele von Installation der neuartigen Ultraschallprüfköpfe in realen Bauteilen, zwei Brücken und einem Fundament, gezeigt und basierend auf dort gewonnenen ersten Erfahrungen ein Konzept für die Umsetzung einer Langzeitüberwachung aufgestellt. N2 - The non-destructive testing of concrete structures with the ultrasound method has become increasingly important in recent years. With the ultrasound technique the geometry of concrete elements can be determined and defects can be detected which are not visible on the surface, such as delaminations and honeycombs. New ultrasound sensors were developed to monitor changes in concrete structures continuously and permanently. Those ultrasound sensors will be embedded into the concrete to transmit and receive ultrasound waves within the structure. This allows a new interpretation of the condition of a structure. The use of the embedded sensors expands the options of the traditional monitoring methods. The ultrasonic technique could monitor a voluminous part of a concrete structure continuously and integral with just a few strategically placed embedded ultrasound sensors and thus register small changes in the concretes texture. Vital parts of concrete structures which are inaccessible for the ultrasonic method after construction can be monitored with embedded sensors. Inaccessibility could be caused by a surface layered with a medium reflecting or absorbing the ultrasonic wave or by to much steel obstruct"-ing the waves path. The sensors can be embedded into existing structures using boreholes and grouting mortar or installed during construction and can thus serve as a tool for quality control. The quick damage evaluation of a construction after a natural disaster such as an earthquake or a flood, is conceivable as well. As the contact between the embedded sensors and the surrounding concrete is assumed as constant over a long time, highly sensitive signal evaluation tools, such as the cross correlation between signals, the Coda Wave Interferometry and the amplitude evaluation, can be used. Therefore, with regular measurements, damage in a construction can be detected at an early stage. But, the damage of a structure can not be measured directly. A distinct damage detection needs a quantity of measured parameters, such as time of flight and amplitude of the ultrasonic wave as well as temperature, which need to be linked to each other. To achieve this, correlations between the state of the concrete construction and those parameters of the measured ultrasonic signal must be investigated. In this work the newly developed ultrasound sensors are introduced. Their installation into a concrete structure is described. The sensors sensitivity to small changes in the concrete is investigated and compared to other Non Destructive Testing (NDT) methods. The highly sensitive signal evaluation tools proof to be particularly advantageous when using embedded sensors. Installations of embedded ultrasound sensors for long time monitoring of real constructions are presented. Based on the gained experience with those installations a concept is presented for the set up of a long time monitoring system. KW - Ultraschall KW - Beton KW - Überwachung KW - Prüfköpfe KW - Temperatur KW - Frost-Tau-Wechsel KW - Schaden KW - Riss KW - ultrasound KW - concrete KW - monitoring KW - sensors KW - temperature KW - Freeze-Thaw-Cycles KW - damage KW - crack Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-397363 ER - TY - THES A1 - Simon, Sebastian T1 - Der Einfluss der Koordination von Spurenelementen in silikatischen und aluminosilikatischen Schmelzen auf Elementverteilungsprozesse in magmatischen Systemen T1 - The influence of trace element coordination in silicate and aluminosilicate melts on the element distribution processes in magmatic systems N2 - Das Wissen um die lokale Struktur von Seltenen Erden Elementen (SEE) in silikatischen und aluminosilikatischen Schmelzen ist von fundamentalem Interesse für die Geochemie der magmatischen Prozesse, speziell wenn es um ein umfassendes Verständnis der Verteilungsprozesse von SEE in magmatischen Systemen geht. Es ist allgemein akzeptiert, dass die SEE-Verteilungsprozesse von Temperatur, Druck, Sauerstofffugazität (im Fall von polyvalenten Kationen) und der Kristallchemie kontrolliert werden. Allerdings ist wenig über den Einfluss der Schmelzzusammensetzung selbst bekannt. Ziel dieser Arbeit ist, eine Beziehung zwischen der Variation der SEE-Verteilung mit der Schmelzzusammensetzung und der Koordinationschemie dieser SEE in der Schmelze zu schaffen. Dazu wurden Schmelzzusammensetzungen von Prowatke und Klemme (2005), welche eine deutliche Änderung der Verteilungskoeffizienten zwischen Titanit und Schmelze ausschließlich als Funktion der Schmelzzusammensetzung zeigen, sowie haplogranitische bzw. haplobasaltische Schmelzzusammensetzungen als Vertreter magmatischer Systeme mit La, Gd, Yb und Y dotiert und als Glas synthetisiert. Die Schmelzen variierten systematisch im Aluminiumsättigungsindex (ASI), welcher bei den Prowatke und Klemme (2005) Zusammensetzungen einen Bereich von 0.115 bis 0.768, bei den haplogranitischen Zusammensetzungen einen Bereich von 0.935 bis 1.785 und bei den haplobasaltischen Zusammensetzungen einen Bereich von 0.368 bis 1.010 abdeckt. Zusätzlich wurden die haplogranitischen Zusammensetzungen mit 4 % H2O synthetisiert, um den Einfluss von Wasser auf die lokale Umgebung von SEE zu studieren. Um Informationen über die lokalen Struktur von Gd, Yb und Y zu erhalten wurde die Röntgenabsorptionsspektroskopie angewendet. Dabei liefert die Untersuchung der Feinstruktur mittels der EXAFS-Spektroskopie (engl. Extended X-Ray Absorption Fine Structure) quantitative Informationen über die lokale Umgebung, während RIXS (engl. resonant inelastic X-ray scattering), sowie die daraus extrahierte hoch aufgelöste Nahkantenstruktur, XANES (engl. X-ray absorption near edge structure) qualitative Informationen über mögliche Koordinationsänderungen von La, Gd und Yb in den Gläsern liefert. Um mögliche Unterschiede der lokalen Struktur oberhalb der Glastransformationstemperatur (TG) zur Raumtemperatur zu untersuchen, wurden exemplarisch Hochtemperatur Y-EXAFS Untersuchungen durchgeführt. Für die Auswertung der EXAFS-Messungen wurde ein neu eingeführter Histogramm-Fit verwendet, der auch nicht-symmetrische bzw. nichtgaußförmige Paarverteilungsfunktionen beschreiben kann, wie sie bei einem hohen Grad der Polymerisierung bzw. bei hohen Temperaturen auftreten können. Die Y-EXAFS-Spektren für die Prowatke und Klemme (2005) Zusammensetzungen zeigen mit Zunahme des ASI, eine Zunahme der Asymmetrie und Breite der Y-O Paarverteilungsfunktion, welche sich in sich in der Änderung der Koordinationszahl von 6 nach 8 und einer Zunahme des Y-O Abstand um 0.13Å manifestiert. Ein ähnlicher Trend lässt sich auch für die Gd- und Yb-EXAFS-Spektren beobachten. Die hoch aufgelösten XANESSpektren für La, Gd und Yb zeigen, dass sich die strukturellen Unterschiede zumindest halb-quantitativ bestimmen lassen. Dies gilt insbesondere für Änderungen im mittleren Abstand zu den Sauerstoffatomen. Im Vergleich zur EXAFS-Spektroskopie liefert XANES jedoch keine Informationen über die Form und Breite von Paarverteilungsfunktionen. Die Hochtemperatur EXAFS-Untersuchungen von Y zeigen Änderungen der lokalen Struktur oberhalb der Glasübergangstemperatur an, welche sich vordergründig auf eine thermisch induzierte Erhöhung des mittleren Y-O Abstandes zurückführen lassen. Allerdings zeigt ein Vergleich der Y-O Abstände für Zusammensetzungen mit einem ASI von 0.115 bzw. 0.755, ermittelt bei Raumtemperatur und TG, dass der im Glas beobachtete strukturelle Unterschied entlang der Zusammensetzungsserie in der Schmelze noch stärker ausfallen kann, als bisher für die Gläser angenommen wurde. Die direkte Korrelation der Verteilungsdaten von Prowatke und Klemme (2005) mit den strukturellen Änderungen der Schmelzen offenbart für Y eine lineare Korrelation, wohingegen Yb und Gd eine nicht lineare Beziehung zeigen. Aufgrund seines Ionenradius und seiner Ladung wird das 6-fach koordinierte SEE in den niedriger polymerisierten Schmelzen bevorzugt durch nicht-brückenbildende Sauerstoffatome koordiniert, um stabile Konfigurationen zu bilden. In den höher polymerisierten Schmelzen mit ASI-Werten in der Nähe von 1 ist 6-fache Koordination nicht möglich, da fast nur noch brückenbildende Sauerstoffatome zur Verfügung stehen. Die Überbindung von brückenbildenden Sauerstoffatomen um das SEE wird durch Erhöhung der Koordinationszahl und des mittleren SEE-O Abstandes ausgeglichen. Dies bedeutet eine energetisch günstigere Konfiguration in den stärker depolymerisierten Zusammensetzungen, aus welcher die beobachtete Variation des Verteilungskoeffizienten resultiert, welcher sich jedoch für jedes Element stark unterscheidet. Für die haplogranitischen und haplobasaltischen Zusammensetzungen wurde mit Zunahme der Polymerisierung auch eine Zunahme der Koordinationszahl und des durchschnittlichen Bindungsabstands, einhergehend mit der Zunahme der Schiefe und der Asymmetrie der Paarverteilungsfunktion, beobachtet. Dies impliziert, dass das jeweilige SEE mit Zunahme der Polymerisierung auch inkompatibler in diesen Zusammensetzungen wird. Weiterhin zeigt die Zugabe von Wasser, dass die Schmelzen depolymerisieren, was in einer symmetrischeren Paarverteilungsfunktion resultiert, wodurch die Kompatibilität wieder zunimmt. Zusammenfassend zeigt sich, dass die Veränderungen der Schmelzzusammensetzungen in einer Änderung der Polymerisierung der Schmelzen resultieren, die dann einen signifikanten Einfluss auf die lokale Umgebung der SEE hat. Die strukturellen Änderungen lassen sich direkt mit Verteilungsdaten korrelieren, die Trends unterscheiden sich aber stark zwischen leichten, mittleren und schweren SEE. Allerdings konnte diese Studie zeigen, in welcher Größenordnung die Änderungen liegen müssen, um einen signifikanten Einfluss auf den Verteilungskoeffizenten zu haben. Weiterhin zeigt sich, dass der Einfluss der Schmelzzusammensetzung auf die Verteilung der Spurenelemente mit Zunahme der Polymerisierung steigt und daher nicht vernachlässigt werden darf. N2 - Knowledge of the local structure around rare earth elements (REE) in silicate and aluminosilicate melts is of fundamental interest for the geochemistry of magmatic processes, particularly for comprehensive understanding of the partitioning processes of REE in magmatic systems. It is generally accepted that mineral-melt partitioning of REE’s is controlled by temperature, pressure, oxygen fugacity (in case of polyvalent cations) and crystal chemistry but less is known about the influence of the melt composition. The aim of this thesis is to establish a relationship between the variation of the REE distribution with the melt composition and the coordination chemistry of this REE in the melt. For this purpose, melt compositions used by Prowatke und Klemme (2005) which show a significant change in the partitioning coefficients between titanite and melt exclusively as a function of melt composition as well as haplogranitic and haplobasaltic melt compositions as a representative of the magmatic systems were doped with La , Gd , Yb and Y and synthesized as glass. The melt compositions systematically vary in aluminum saturationindex ( ASI ), from 0.115 to 0.768 for the Prowatke und Klemme (2005) compositions, from 0.935 to 1.785 for the the haplogranitic composition and from 0.368 to 1.010 for the haplobasaltic composition. Moreover, haplogranitic compositions were synthesized with 4 wt% H2O to study the influence of water on the local structure of REE. To gather information about the local structure of Gd, Yb and Y x-ray absorption spectroscopy was used. While extended x-ray absorption fine structure spectroscopy was used to gather quantitative information of the locale structure around the REE, resonate inelastic x-ray scattering (RIXS) and the extracted high resolution x-ray absorption near edge structure (XANES) was used to gather additional qualitative information on the local environment of La, Gd and Yb in the glasses. Additional high temperature in situ Y-EXAFS was performed to prove, if the local structure of Y above transition region (TG) corresponds to the local structure in the quenched melts. For the analysis of the EXAFS data a new histogram fit was used, which could describe a non-symmetric respectively non-Gauss-shape pair distribution function, as they may occur with a high degree of polymerization or at high temperatures. The results for Y in the Prowatke und Klemme (2005) compositions show an increase of the width and skewness of the Y-O pair distribution function with increasing polymerization, which goes along with an increase of the coordination number from 6 to 8 while average bond length increases by 0.13 Å. A similar trend is also observed for Gd- and Yb-EXAFS spectra. Furthermore, the high resolution XANES for La, Gd and Yb show that structural difference could be revealed, at least half qualitative, in particular for changes of the average bond length to the oxygen atoms. However, compared to the EXAFS method, this method does not provide information about the shape and width of pair distribution functions. The high temperature EXAFS investigation of Y reveal no significant changes in the local structure above TG except for the thermally induced increase in the average Y-O distance. A comparison of the Y-O distances for compositions with an ASI of 0.115 and 0.755 determined at room temperature and TG indicated that the structural changes in the glass along one composition series could be even stronger in the melts. The direct correlation of the partitioning coefficient from Prowatke und Klemme (2005) with the structural changes in the glass reveals for Y a linear correlation, whereas Yb and Gd show a nonlinear relationship. Because of its ionic radius and charge, the REE is preferably 6-fold coordinated by nonbridging oxygen in low polymerized melts to form stable configurations. In highly polymerized melts with an ASI close to 1, 6-fold coordination is not possible because almost only bridging oxygens are available. The over bonding of bridging oxygen atoms around the REE will be compensated via increasing coordination number and the average REE-O distance. This means that the configuration in the more depolymerized compositions is energetically more favorable, so that the observed variation of the partitioning coefficient results from these differences, which is eventually different for each element. For the haplogranitic and haplobasaltic compositions an increase of the skewness and the asymmetry of the pair distribution function with increase of polymerization of the melt was observed which result in an increase of the coordination number and average distance. This implies, that the respective REE is also getting more incompatible with the increase of the asymmetry in this compositions. Furthermore, the addition of water shows that the melts depolymerize, which resulted in a more symmetrical pair distribution function by which the compatibility increases again. Finally, the changes in melt composition result in a change of the polymerization of the melt, which has a significant impact on the local environment of the REE. The structural changes can be directly correlated with distribution data, but the trends differ significantly between light, medium and heavy REE. However, this study was able to show what structural change is required to have a significant impact on the partition coefficient. Furthermore, the influence of melt composition on the distribution of trace elements increase with increase of polymerization and should therefore not be neglected. KW - Geochemie KW - Spurenelementverteilung KW - lokale Struktur KW - Röntgenabsorptionspektroskopie KW - trace elements KW - local structure KW - x-ray absorption spectroscopy KW - asymmetric pair distribution function Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-100932 ER - TY - THES A1 - Roers, Michael T1 - Methoden zur Dynamisierung von Klimafolgenanalysen im Elbegebiet T1 - Methods for a dynamisation of climate impact studies in the Elbe River basin BT - Aktualisierung von Szenarienstudien zu den Auswirkungen des Klimawandels und fortlaufende Überprüfung ökohydrologischer Modellergebnisse BT - actualisation of scenario studies on impacts of climate change and continuous verification of ecohydrological model results N2 - Die Elbe und ihr Einzugsgebiet sind vom Klimawandel betroffen. Um die Wirkkette von projizierten Klimaveränderungen auf den Wasserhaushalt und die daraus resultierenden Nährstoffeinträge und -frachten für große Einzugsgebiete wie das der Elbe zu analysieren, können integrierte Umweltmodellsysteme eingesetzt werden. Fallstudien, die mit diesen Modellsystemen ad hoc durchgeführt werden, repräsentieren den Istzustand von Modellentwicklungen und -unsicherheiten und sind damit statisch. Diese Arbeit beschreibt den Einstieg in die Dynamisierung von Klimafolgenanalysen im Elbegebiet. Dies umfasst zum einen eine Plausibilitätsprüfung von Auswirkungsrechnungen, die mit Szenarien des statistischen Szenariengenerators STARS durchgeführt wurden, durch den Vergleich mit den Auswirkungen neuerer Klimaszenarien aus dem ISI-MIP Projekt, die dem letzten Stand der Klimamodellierung entsprechen. Hierfür wird ein integriertes Modellsystem mit "eingefrorenem Entwicklungsstand" verwendet. Die Klimawirkungsmodelle bleiben dabei unverändert. Zum anderen wird ein Bestandteil des integrierten Modellsystems – das ökohydrologische Modell SWIM – zu einer "live"-Version weiterentwickelt. Diese wird durch punktuelle Testung an langjährigen Versuchsreihen eines Lysimeterstandorts sowie an aktuellen Abflussreihen validiert und verbessert. Folgende Forschungsfragen werden bearbeitet: (i) Welche Effekte haben unterschiedliche Klimaszenarien auf den Wasserhaushalt im Elbegebiet und ist eine Neubewertung der Auswirkung des Klimawandels auf den Wasserhaushalt notwendig?, (ii) Was sind die Auswirkungen des Klimawandels auf die Nährstoffeinträge und -frachten im Elbegebiet sowie die Wirksamkeit von Maßnahmen zur Reduktion der Nährstoffeinträge?, (iii) Ist unter der Nutzung (selbst einer sehr geringen Anzahl) verfügbarer tagesaktueller Witterungsdaten in einem stark heterogenen Einzugsgebiet eine valide Ansprache der aktuellen ökohydrologischen Situation des Elbeeinzugsgebiets möglich? Die aktuellen Szenarien bestätigen die Richtung, jedoch nicht das Ausmaß der Klimafolgen: Die Rückgänge des mittleren jährlichen Gesamtabflusses und der monatlichen Abflüsse an den Pegeln bis Mitte des Jahrhunderts betragen für das STARS-Szenario ca. 30 %. Die Rückgänge bei den auf dem ISI-MIP-Szenario basierenden Modellstudien liegen hingegen nur bei ca. 10 %. Hauptursachen für diese Divergenz sind die Unterschiede in den Niederschlagsprojektionen sowie die Unterschiede in der jahreszeitlichen Verteilung der Erwärmung. Im STARS-Szenario gehen methodisch bedingt die Niederschläge zurück und der Winter erwärmt sich stärker als der Sommer. In dem ISI-MIP-Szenario bleiben die Niederschläge nahezu stabil und die Erwärmung im Sommer und Winter unterscheidet sich nur geringfügig. Generell nehmen die Nährstoffeinträge und -frachten mit den Abflüssen in beiden Szenarien unterproportional ab, wobei die Frachten jeweils stärker als die Einträge zurückgehen. Die konkreten Effekte der Abflussänderungen sind gering und liegen im einstelligen Prozentbereich. Gleiches gilt für die Unterschiede zwischen den Szenarien. Der Effekt von zwei ausgewählten Maßnahmen zur Reduktion der Nährstoffeinträge und -frachten unterscheidet sich bei verschiedenen Abflussverhältnissen, repräsentiert durch unterschiedliche Klimaszenarien in unterschiedlich feuchter Ausprägung, ebenfalls nur geringfügig. Die Beantwortung der ersten beiden Forschungsfragen zeigt, dass die Aktualisierung von Klimaszenarien in einem ansonsten "eingefrorenen" Verbund von ökohydrologischen Daten und Modellen eine wichtige Prüfoption für die Plausibilisierung von Klimafolgenanalysen darstellt. Sie bildet die methodische Grundlage für die Schlussfolgerung, dass bei der Wassermenge eine Neubewertung der Klimafolgen notwendig ist, während dies bei den Nährstoffeinträgen und -frachten nicht der Fall ist. Die zur Beantwortung der dritten Forschungsfrage mit SWIM-live durchgeführten Validierungsstudien ergeben Diskrepanzen am Lysimeterstandort und bei den Abflüssen aus den Teilgebieten Saale und Spree. Sie lassen sich zum Teil mit der notwendigen Interpolationsweite der Witterungsdaten und dem Einfluss von Wasserbewirtschaftungsmaßnahmen erklären. Insgesamt zeigen die Validierungsergebnisse, dass schon die Pilotversion von SWIM-live für eine ökohydrologische Ansprache des Gebietswasserhaushaltes im Elbeeinzugsgebiet genutzt werden kann. SWIM-live ermöglicht eine unmittelbare Betrachtung und Beurteilung simulierter Daten. Dadurch werden Unsicherheiten bei der Modellierung direkt offengelegt und können infolge dessen reduziert werden. Zum einen führte die Verdichtung der meteorologischen Eingangsdaten durch die Verwendung von nun ca. 700 anstatt 19 Klima- bzw. Niederschlagstationen zu einer Verbesserung der Ergebnisse. Zum anderen wurde SWIM-live beispielhaft für einen Zyklus aus punktueller Modellverbesserung und flächiger Überprüfung der Simulationsergebnisse genutzt. Die einzelnen Teilarbeiten tragen jeweils zur Dynamisierung von Klimafolgenanalysen im Elbegebiet bei. Der Anlass hierfür war durch die fehlerhaften methodischen Grundlagen von STARS gegeben. Die Sinnfälligkeit der Dynamisierung ist jedoch nicht an diesen konkreten Anlass gebunden, sondern beruht auf der grundlegenden Einsicht, dass Ad-hoc-Szenarienanalysen immer auch pragmatische Vereinfachungen zugrunde liegen, die fortlaufend überprüft werden müssen. N2 - The Elbe River basin is affected by climate change. To analyse the chain of effects of projected climate change on the water balance and the resulting nutrient emissions and loads in large river basins such as the Elbe, integrated environmental model systems can be applied. Case studies that are conducted ad hoc with these model systems represent the current state of model developments and uncertainties - therefore, they are static. This thesis describes access to a dynamisation of climate impact studies in the Elbe River basin. On the one hand, this comprises a verification of impact simulations that are conducted with scenarios from the statistical scenario generator STARS, with the impacts of newer climate scenarios from the ISI-MIP project, that represent state-of-the-art climate modelling. For this purpose, an integrated model system with a "frozen" development status is used. At the same time, the climate impact models remain unchanged. On the other hand, one component of the integrated model system - the ecohydrological model SWIM - is enhanced as a "live"-system. This is validated and improved by punctual testing with experimental long time series from a lysimeter site and with recent runoff time series. The following research questions are addressed: (i) What are the effects of different climate scenarios on the water balance in the Elbe River basin, and is a reassessment of the impacts of climate change on the water balance necessary?, (ii) What are the impacts of climate change on the nutrient emissions and loads in the Elbe River basin as well as the effectiveness of measures for reducing nutrient emissions?, (iii) Is a valid assessment of the actual ecohydrological situation in the Elbe River basin possible, using (only a small amount of) available day-to-day weather data in a highly heterogeneous river basin? The recent scenarios confirm the direction, but not the magnitude, of climate impacts: In the STARS scenario, the decrease in mean annual discharge and mean monthly stream ow until the middle of the century is approx. 30 %. However, the model studies based on the ISI-MIP scenarios show only a decrease of approx. 10 %. The main reason for this divergence can be attributed to differences in the precipitation projections and differences in the seasonal distribution of the warming. In the STARS scenario, the precipitation decreases due to the methodological principles applied and the warming in winter is stronger than in summer. In the ISI-MIP scenario, the precipitation is almost stable and the warming differs only slightly between summer and winter. In general, the nutrient emissions and loads decrease underproportionally with the river basin discharge in both scenarios, with loads declining more sharply than the emissions. The concrete effects of the change in river basin discharge are small, reaching only single-digit percentages. The same holds true for the difference between the scenarios. The effect of selected measures for the reduction of nutrient emissions and loads also differs only slightly between varying runoff conditions, represented by different climate scenarios with dry, mean and wet specifications. Answering the first two research questions shows that the actualisation of climate scenarios in an otherwise "frozen" combination of ecohydrological data and models represents an important testing option for the plausibilisation of climate impact studies. It forms the methodological basis for the conclusion that a reassessment of climate impact is necessary in terms of water quantity, whereas this is not the case for the nutrient emissions and loads. The validation studies that were conducted to answer the third research question show discrepancies at the lysimeter site and in the flows from the sub-catchments of the Saale and Spree Rivers. They can be explained in part by the low spatial density of the climate data and the influences from water-management practices. However, the validation results show that the pilot version of SWIM-live can already be used for an eco-hydrological assessment of the water balance in the Elbe River basin. SWIM-live provides an immediate visualisation and assessment of the simulated data. By this means, uncertainties in the simulations are directly revealed and can be reduced. On the one hand, a concentration of the meteorological input data using approx. 700 instead of 19 climate and precipitation stations leads to an improvement of the results. On the other hand, SWIM-live is used exemplarily for a cycle of punctual model improvement and spatial verification of the simulations. The individual parts of this thesis contribute to the dynamisation of climate impact studies in the Elbe River basin. The motivation for the study was the flawed methodological basis of STARS. Dynamisation is relevant not only for this reason, but is also based on the underlying understanding that ad hoc scenario analyses involve pragmatic simplifications that must be verified continuously. KW - Klimawandel KW - Wasserhaushalt KW - Nährstoffeinträge KW - tagesaktuelle Simulation KW - Elbe KW - climate change KW - water balance KW - nutrient emissions KW - simulation on a day-to-day-basis KW - Elbe Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-98844 ER - TY - THES A1 - Muksin, Umar T1 - A fault-controlled geothermal system in Tarutung (North Sumatra, Indonesia)investigated by seismological analysis N2 - The seismic structure (Vp, Vp/Vs, and Qp anomalies) contributes to the physical properties and the lithology of rocks and possible fluid distribution in the region. The Vp model images the geometry of the Tarutung and the Sarulla basins. Both basins have a depth of around 2.0 km. High Vp/Vs and high attenuation (low Qp) anomalies are observed along the Sarulla graben associated with a weak zone caused by volcanic activities along the graben. Low Vp/Vs and low conductivity anomalies are found in the west of the Tarutung basin. This anomaly is interpreted as dry, compact, and rigid granitic rock in the region as also found by geological observations. Low Vp, high Vp/Vs and low Qp anomalies are found at the east of the Tarutung basin which appear to be associated with the three big geothermal manifestations in Sipoholon, Hutabarat, and Panabungan area. These anomalies are connected with high Vp/Vs and low Qp anomalies below the Tarutung basin at depth of around 3 - 10 km. This suggests that these geothermal manifestations are fed by the same source of the hot fluid below the Tarutung basin. The hot fluids from below the Tarutung basin propagate to the more dilatational and more permeable zone in the northeast. Granite found in the west of the Tarutung basin could also be abundant underneath the basin at a certain depth so that it prevents the hot fluid to be transported directly to the Tarutung basin. High seismic attenuation and low Vp/Vs anomalies are found in the southwest of the Tarutung basin below the Martimbang volcano. These anomalies are associated with hot rock below the volcano without or with less amount of partial melting. There is no indication that the volcano controls the geothermal system around the Tarutung basin. The geothermal resources around the Tarutung basin is a fault-controlled system as a result of deep circulation of fluids. Outside of the basin, the seismicity delineation and the focal mechanism correlate with the shape and the characteristics of the strike-slip Sumatran fault. Within the Tarutung basin, the seismicity is distributed more broadly which coincides with the margin of the basin. An extensional duplex system in the Tarutung basin is derived from the seismicity and focal mechanism analysis which is also consistent with the geological observations. The vertical distribution of the seismicity suggests the presence of a negative flower structure within the Tarutung basin. N2 - Indonesien zählt zu den weltweit führenden Ländern bei der Nutzung von geothermischer Energie. Die geothermischen Energiequellen sind im Wesentlichen an den aktiven Vulkanismus gebunden, der durch die Prozesse an der indonesischen Subduktionszone verursacht wird. Darüber hinaus sind geotektonische Strukturen wie beispielsweise die Sumatra-Störung als verstärkende Faktoren für das geothermische Potenzial von Bedeutung. Bei der geophysikalischen Erkundung der indonesischen Geothermie-Ressourcen konzentrierte man sich bisher vor allem auf die Magnetotellurik. Passive Seismologie wurde dahingegen ausschließlich für die Überwachung von im Betrieb befindlichen Geothermie-Anlagen verwendet. Jüngste Untersuchungungen z.B. in Island und in den USA haben jedoch gezeigt, dass seismologische Verfahren bereits in der Erkundungsphase wichtige Informationen zu den physikalischen Eigenschaften, zum Spannungsfeld und zu möglichen Fluid- und Wärmetransportwegen liefern können. In der vorgelegten Doktorarbeit werden verschiedene moderne Methoden der passiven Seismologie verwendet, um beispielhaft ein neues, von der indonesischen Regierung für zukünftige geothermische Energiegewinnung ausgewiesenes Gebiet im nördlichen Teil Sumatras (Indonesien) zu erkunden. Die konkreten Ziele der Untersuchungen umfassten (1) die Ableitung von 3D Strukturmodellen der P- und S-Wellen Geschwindigkeiten (Parameter Vp und Vs), (2) die Bestimmung der Absorptionseigenschaften (Parameter Qp), und (3) die Kartierung und Charakterisierung von Störungssystemen auf der Grundlage der Seismizitätsverteilung und der Herdflächenlösungen. Für diese Zwecke habe ich zusammen mit Kollegen ein seismologisches Netzwerk in Tarutung (Sumatra) aufgebaut und über einen Zeitraum von 10 Monaten (Mai 2011 – Februar 2012) betrieben. Insgesamt wurden hierbei 42 Stationen (jeweils ausgestattet mit EDL-Datenlogger, 3-Komponenten, 1 Hz Seismometer) über eine Fläche von etwa 35 x 35 km verteilt. Mit dem Netzwerk wurden im gesamten Zeitraum 2568 lokale Erdbeben registriert. Die integrierte Betrachtung der Ergebnisse aus den verschiedenen Teilstudien (Tomographie, Erdbebenverteilung) erlaubt neue Einblicke in die generelle geologische Stukturierung sowie eine Eingrenzung von Bereichen mit einem erhöhten geothermischen Potenzial. Das tomographische Vp-Modell ermöglicht eine Bestimmung der Geometrie von Sedimentbecken entlang der Sumatra-Störung. Für die Geothermie besonders interessant ist der Bereich nordwestlich des Tarutung-Beckens. Die dort abgebildeten Anomalien (erhöhtes Vp/Vs, geringes Qp) habe ich als mögliche Aufstiegswege von warmen Fluiden interpretiert. Die scheinbar asymetrische Verteilung der Anomalien wird hierbei im Zusammenhang mit der Seismizitätsverteilung, der Geometrie der Beben-Bruchflächen, sowie struktur-geologischen Modellvorstellungen diskutiert. Damit werden wesentliche Informationen für die Planung einer zukünftigen geothermischen Anlage bereitgestellt. T2 - Seismologische Untersuchungen eines Störungs-kontrollierten geothermischen Systems in Tarutung (Nord-Sumatra, Indonesien) KW - Tarutung KW - Sumatra Störung KW - Absorptionseigenschaften KW - seismische Geschwindigkeiten KW - Tarutung KW - Sumatra fault KW - attenuation tomography KW - velocity structure Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-72065 ER - TY - THES A1 - Liebs, Göran T1 - Ground penetration radar wave velocities and their uncertainties T1 - Georadar-Wellengeschwindigkeiten mit Fehlerrechnung BT - global inversion of GPR traveltimes to assess uncertainties in CMP velocity models N2 - We develop three new approaches for ground penetration wave velocity calcultaions. The first is based on linear moveout spectra to find the optimum ground wave velocity including uncertainties from multi-offset data gathers. We used synthetic data to illustrate the principles of the method and to investigate uncertainties in ground wave velocity estimates. To demonstrate the applicability of the approach to real data, we analyzed GPR data sets recorded at field sites in Canada over an annual cycle from Steelman & Endres [2010]. The results obtained by this efficient and largely automated procedure agree well with the manual achieved results of Steelman & Endres [2010], derived by a more laborious largely manual analysis strategy. Then we develop a second methodology to global invert reflection traveltimes with a particle swarm optimization approach more precise then conventional spectral NMO-based velocity analysis (e.g., Greaves et al. [1996]). For global optimization, we use particle swarm optimization (PSO; Kennedy & Eberhart [1995]) in the combination with a fast eikonal solver as forward solver (Sethian [1996]; Fomel [1997a]; Sethian & Popovici [1999]). This methodology allows us to generate reliability CMP derived models of subsurface velocities and water content including uncertainties. We test this method with synthetic data to study the behavior of the PSO algorithm. Afterward, We use this method to analyze our field data from a well constrained test site in Horstwalde, Germany. The achieved velocity models from field data showed good agreement to borehole logging and direct-push data (Schmelzbach et al. [2011]) at the same site position. For the third method we implement a global optimization approach also based on PSO to invert direct-arrival traveltimes of VRP data to obtain high resolution 1D velocity models including quantitative estimates of uncertainty. Our intensive tests with several traveltime data sets helped to understand the behavior of PSO algorithm for inversion. Integration of the velocity model to VRP reflection imaging and attenuation model improved the potential of VRP surveying. Using field data, we examine this novel analysis strategy for the development of petrophysical models and the linking between GPR borehole and other logging data to surface GPR reflection data. N2 - Unterschiedliche Verfahren zur Ermittlung von Georadar-Wellengeschwindigkeiten wurden entwickelt und erfolgreich angewendet. Für die Verfahren wurden statistische Methoden und Schwarmintelligenz-Algorithmen benutzt. Es wurde gezeigt, dass die neuen Verfahren schneller, präziser und besser reproduzierbare Ergebnisse für Georadar-Wellengeschwindigkeit erzielen als herkömmliche Verfahren. Mit verbesserten Werten der Georadar-Wellengeschwindigkeit lassen sich die verzerrten dreidimensionalen Abbilder der obersten zehn Meter des Untergrundes, welche sich mit Georadar-Daten erzeugen lassen, korrigieren. In diesen korrigierten Abbildern sind dann realistische Tiefen von Schichten oder Objekten im Untergrund besser messbar. Außerdem verbessern präzisere Wellengeschwindigkeiten die Bestimmung von Bodenparametern, wie Wassergehalt oder Tonanteil. Die präsentierten Verfahren erlauben eine quantitative Angabe von Fehlern der bestimmten Wellengeschwindigkeit und der daraus folgenden Tiefen und Bodenparametern im Untergrund. Die Vorteile dieser neu entwickelten Verfahren zur Charakterisierung des Untergrundes der oberen Meter wurde an Feldbeispielen demonstriert. KW - ground-penetration radar KW - wave velocities KW - global inversion KW - particle swarm optimisation KW - soil water content KW - subsurface KW - geophyics KW - Georadar KW - Wellengeschwindigkeit KW - globale Inversion KW - Partikel Swarm Optimierung KW - Bodenwassergehalt KW - Untergrund KW - Geophysik Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-436807 ER - TY - THES A1 - Abdelfadil, Khaled Mohamed T1 - Geochemistry of Variscan lamprophyre magmatism in the Saxo-Thuringian Zone N2 - Lamprophyres are mantle-derived magmatic rocks, commonly occurring as dikes. They are readily identified from their field setting, petrography, chemical and mineralogical composition. These rocks not only provide important information on melting processes in the mantle, but also on geodynamic processes modifying the mantle. There are numerous occurrences of lamprophyres in the Saxo-Thuringian Zone of Variscan Central Europe, which are useful to track the variable effects of the Variscan orogeny on local mantle evolution. This work presents and evaluates the mineralogical, geochemical, and Sr-Nd-Pb isotopic data of late-Variscan calc-alkaline lamprophyres, post-Variscan ultramafic lamprophyres, of alkaline basalt from Lusatia, and, for comparison, of pre-Variscan gabbros. In addition, lithium isotopic signatures combined with Sr-Nd-Pb isotopic data of late-Variscan calc-alkaline lamprophyres from three different Variscan Domains (i.e., Erzgebirge, Lusatia, and Sudetes) are used to assess compositional changes of the mantle during Variscan orogeny. N2 - Lamprophyre sind porphyrische, aus Mantelschmelzen gebildete Gesteine, die meist in Form von Gängen auftreten. Sie zeichnen sich durch auffällige und charakteristische texturelle, chemische und mineralogische Eigenschaften aus. Als ehemalige Mantelschmelzen liefern sie Information sowohl über Bedingungen der Schmelzbildung im Mantel als auch über geodynamische Prozesse, die zu metasomatischer Veränderung des Mantels geführt haben. Im Saxothuringikum Mitteleuropas, am Nordrand des Böhmischen Massivs, gibt es zahlreiche Lamprophyrvorkommen, die hier zur Charakterisierung der Mantelentwicklung während der variszischen Orogenese dienen. Die vorliegende Arbeit befaßt sich mit den mineralogischen, geochemischen und isotopischen (Sr-Nd-Pb) Signaturen von spätvariszischen kalkalkalischen Lamprophyren, von postvariszischen ultramafischen Lamprophyren, von Alkalibasalten der Lausitz und, zum Vergleich, von prävariszischen Gabbros. Darüberhinaus nutzt die Arbeit Lithium-Isotopensignaturen kombiniert mit Sr-Nd-Pb–Isotopendaten spätvariszischer kalkalkalischer Lamprophyre aus drei variszischen Domänen (Erzgebirge, Lausitz, Sudeten) zur Erkundung der lokalen Mantelüberprägungen während der variszischen Orogenese. T2 - Geochemie der variszischen Lamprophyre in der saxothüringischen Zone KW - lamprophyre KW - Lusatia KW - Erzgebirge KW - Saxo-Thuringia Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-68854 ER - TY - THES A1 - Arnold, Gabriele T1 - Spektrale Fernerkundung der terristrischen Planetoberflächen von Merkur, Venus und Mars vom visuellen bis in den infraroten Wellenlängenbereich Y1 - 2013 CY - Potsdam ER - TY - THES A1 - Münzel, Sandra T1 - Aspekte der Evolution von aufgespühltem Abraummaterial des Platinerzbergbaus Y1 - 2013 CY - Potsdam ER - TY - THES A1 - Cherubini, Yvonne T1 - Influence of faults on the 3D coupled fluid and heat transport N2 - Da geologische Störungen können als Grundwasserleiter, -Barrieren oder als gemischte leitende /stauende Fluidsysteme wirken. Aufgrund dessen können Störungen maßgeblich den Grundwasserfluss im Untergrund beeinflussen, welcher deutliche Veränderungen des tiefen thermischen Feldes bewirken kann. Grundwasserdynamik und Temperaturveränderungen sind wiederum entscheidende Faktoren für die Exploration geothermischer Energie. Diese Studie untersuchte den Einfluss von Störungen auf das Fluidsystem und das thermische Feld im Untergrund. Sie erforschte die physikalischen Prozesse, welche das Fluidverhalten und die Temperaturverteilung in Störungen und in den umgebenden Gesteinen. Dazu wurden 3D Finite Elemente Simulationen des gekoppelten Fluid und Wärmetransports für synthetische sowie reale Modelszenarien auf unterschiedlichen Skalen durchgeführt. Um den Einfluss einer schräg einfallenden Störung systematisch durch die schrittweise Veränderung der hydraulischen Öffnungsweite und der Permeabilität, zu untersuchen, wurde ein klein-skaliges synthetisches Modell entwickelt. Ein inverser linearer Zusammenhang wurde festgestellt, welcher zeigt, dass sich die Fluidgeschwindigkeit in der Störung jeweils um ~1e-01 m/s verringert, wenn die Öffnungsweite der Störung um jeweils eine Magnitude vergrößert wird. Ein hoher Permeabilitätskontrast zwischen Störung und umgebender Matrix begünstigt die Fluidadvektion hin zur Störung und führt zu ausgeprägten Druck- und Temperaturveränderungen innerhalb und um die Störung herum. Bei geringem Permeabilitätskontrast zwischen Störung und umgebendem Gestein findet hingegen kein Fluidfluss in der Störung statt, wobei das hydrostatische Druck- sowie das Temperaturfeld unverändert bleiben. Auf Grundlage der synthetischen Modellierungsergebnisse wurde der Einfluss von Störungen auf einer größeren Skala anhand eines komplexeren (realen) geologischen Systems analysiert. Dabei handelt es sich um ein 3D Modell des Geothermiestandortes Groß Schönebeck, der ca. 40 km nördlich von Berlin liegt. Die Integration von einer permeablen und drei impermeablen Hauptstörungen, zeigte unterschiedlich starke Einflüsse auf Fluidzirkulation, Temperatur – und Druckfeld. Die modellierte konvektive Zirkulation in der permeablen Störung verändert das thermische Feld stark (bis zu 15 K). In den gering durchlässigen Störungen wird die Wärme ausschließlich durch Diffusion geleitet. Der konduktive Wärmetransport beeinflusst das thermische Feld nicht, bewirkt jedoch lokale Veränderungen des hydrostatischen Druckfeldes. Um den Einfluss großer Störungszonen mit kilometerweitem vertikalen Versatz auf das geothermische Feld der Beckenskala zu untersuchen, wurden gekoppelte Fluid- und Wärmetransportsimulationen für ein 3D Strukturmodell des Gebietes Brandenburg durchgeführt (Noack et al. 2010; 2013). Bezüglich der Störungspermeabilität wurden verschiedene geologische Szenarien modelliert, von denen zwei Endgliedermodelle ausgewertet wurden. Die Ergebnisse zeigten, dass die undurchlässigen Störungen den Fluidfluss nur lokal beeinflussen. Da sie als hydraulische Barrieren wirken, wird der Fluidfluss mir sehr geringen Geschwindigkeiten entlang der Störungen innerhalb eines Bereichs von ~ 1 km auf jeder Seite umgelenkt. Die modellierten lokalen Veränderungen des Grundwasserzirkulationssystems haben keinen beobachtbaren Effekt auf das Temperaturfeld. Hingegen erzeugen permeable Störungszonen eine ausgeprägte thermische Signatur innerhalb eines Einflussbereichs von ~ 2.4-8.8 km in -1000 m Tiefe und ~6-12 km in -3000 m Tiefe. Diese thermische Signatur, in der sich kältere und wärmere Temperaturbereiche abwechseln, wird durch auf- und abwärts gerichteten Fluidfluss innerhalb der Störung verursacht, der grundsätzlich durch existierende Gradienten in der hydraulischen Druckhöhe angetrieben wird. Alle Studien haben gezeigt, dass Störungen einen beachtlichen Einfluss auf den Fluid-, und Wärmefluss haben. Es stellte sich heraus, dass die Permeabilität in der Störung und in den umgebenden geologischen Schichten so wie der spezifische geologische Rahmen entscheidende Faktoren in der Ausbildung verschiedener Wärmetransportmechanismen sind, die sich in Störungen entwickeln können. Die von permeablen Störungen verursachten Temperaturveränderungen können lokal, jedoch groß sein, genauso wie die durch hydraulisch leitende und nichtleitende Störungen hervorgerufenen Veränderungen des Fluidystems. Letztlich haben die Simulationen für die unterschiedlich skalierten Modelle gezeigt, dass die Ergebnisse sich nicht aufeinander übertragen lassen und dass es notwendig ist, jeden geologischen Rahmen hinsichtlich Konfiguration und Größenskala gesondert zu betrachten. Abschließend hat diese Studie demonstriert, dass die Betrachtung von Störungen in 3D Finiten Elementen Modellen für die Simulation von gekoppeltem Fluid- und Wärmetransport auf unterschiedlichen Skalen möglich ist. Da diese Art von numerischen Simulationen sowohl die geologische Struktur des Untergrunds sowie die im Erdinnern ablaufenden physikalischen Prozesse integriert, können sie einen wertvollen Beitrag leisten, indem sie Feld- und Laborgestützte Untersuchungen vervollständigen. N2 - Faults can act as conduits, barriers or mixed conduit/barrier systems to fluid flow. Therefore, faults may significantly influence fluid flow regimes operating in the subsurface, possibly resulting in distinct variations of the deep thermal field. Both, flow dynamics and temperature changes are in turn crucial factors that need to be taken into account for geothermal energy exploration. This study investigated the influence of faults on the subsurface fluid system and thermal field and explored the processes controlling fluid behavior and thermal distribution both within host rocks and faults. For this purpose, 3D finite element simulations of coupled fluid and heat transport have been carried out, both for synthetic and real-case model scenarios on different scales. A small-scale synthetic model was developed to systematically assess the impact of an inclined fault by changing gradually its hydraulic width and its permeability within the simulations. An observed linear inverse relationship revealed that changing the fault width by one order of magnitude results in a fluid velocity decrease (~1e-01 m/s) within the fault. A high permeability contrast between fault and matrix favors fluid advection into the fault and leads to pronounced pressure and temperature changes in and around the same domain. When the permeability contrast between fault domain and host rock is low, however, no fluid flow is observed in the fault, thus resulting in undisturbed hydrostatic pressure and temperature fields. On the basis of these synthetic fault modelling results, the influence of faults on a larger scale have been analyzed within a more complex (real-case) geological setting,- a 3D model of the geothermal site Groß Schönebeck , located ~40 km north of Berlin. The integration of one permeable and three impermeable major faults, resulted in distinct changes observed in the local fluid circulation, thermal and pressure field. Modelled convective circulation within the permeable fault decisively modifies the thermal field (up to 15 K). Within the low permeable faults, heat is transferred only by conduction, inducing no thermal imprint but local deviations of the hydrostatic pressure field. To investigate the impact of major fault zones on the basin-scale geothermal field, coupled fluid and heat transport simulations have been conducted for a 3D structural model for Brandenburg region (Noack et al. 2010; 2013). Different geological scenarios in terms of modelled fault permeability have been carried out of which two end member models are analyzed. The results showed that tight fault zones affect the flow field locally. Acting as hydraulic barriers, fluid flow is deviated with very low velocities along them within a range of ~ 1 km on either sides. The modelled local changes in the groundwater circulation system have no considerable effect on the temperature field. By contrast, permeable fault zones induce a pronounced signature on the thermal field extending over a distance of ~ 2.4-8.8 km at -1000 m depth and ~6-12 km at -3000 m depth. This thermal signature, characterized by alternating cooler and hotter temperature domains, is controlled by up- and downward directed flow within the fault domain, principally driven by existing hydraulic head gradients. All studies demonstrated that faults have a considerable impact on the fluid and heat flow. The permeability in faults and surrounding geological layers as well as the specific geological setting turned out to be crucial factors in controlling the different kinds of heat transfer mechanisms that may evolve in faults. Temperature variations caused by permeable faults may be local but significant as well as changes in fluid dynamics by both conduits and barriers. Thus, the results demonstrated the importance to consider faults in geothermal energy exploration. In the final analysis, the simulations for the small-, regional- and basin-scale models showed that the outcomes cannot be transferred by upscaling and that it is necessary to consider each geological setting separately with respect to its configuration and scale dimension. In summary, this study demonstrated that the consideration of faults in 3D finite element models for coupled fluid and heat transport simulations on different scales is feasible. As these type of numerical simulations integrate both, the structural setting of the subsurface and the physical processes controlling subsurface transport, the outcomes of this thesis may provide positive contributions in that they valuably complement field- and laboratory-based investigations. T2 - Der Einfluss von Störungen auf den 3D gekoppelten Fluid- und Wärmetransport KW - geologische Störungen KW - 3D numerische Modelle KW - gekoppelter Fluid-und Wärmetransport KW - Geothermie KW - Brandenburg KW - faults KW - 3D numerical models KW - coupled fluid and heat transport KW - geothermics KW - Brandenburg Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-69755 ER - TY - THES A1 - Sauer, Patrick T1 - Liberation of low molecular weight organic acids from sedimentary organic matter and their role on microbial activity N2 - Low molecular weight organic acids (LMWOAs) are important nutrients for microbes. However, most LMWOAs do not exist freely in the environment but are bound to macromolecular organic matter, e.g. kerogen, lignite and coal. During burial and geological maturation of sedimentary macromolecular organic matter biological and abiological processes promote the liberation of LMWOAs into the surrounding sediment. Through this process, microbes in sedimentary subsurface environments are supplied with essential nutrients. To estimate the feedstock potential of buried macromolecular organic matter to many environments it is important to determine the amount of LMWOAs that are bound to such a matrix. However, high-pressure and high temperature are a key feature of deep subsurface environments, and these physical parameters have a profound influence on chemical reaction kinetics. Therefore it is essential for the estimation of the feedstock potential to generate high-pressure and high temperature for the liberation of LMWOAs to recreate true in-situ conditions. This work presents a newly developed, inexpensive incubation system for biological and geological samples. It allows the application of high-pressure and high temperature as well as a subsampling of the liquid phase without loss of pressure, thereby not disturbing the on-going processes. When simulating the liberation of LMWOAs from sedimentary organic matter, the newly developed incubation system produces more realistic results than other extraction systems like Soxhlet. The extraction products remain in the extraction medium throughout the extraction, influencing the chemical conditions of the extraction medium. Sub-bituminous coal samples from New Zealand as well as lignite samples from Germany were extracted at elevated temperature (90˚C) and pressure (5 MPa). The main LMWOAs released from these low rank coals were formate, acetate and oxalate. Extraction efficiency was increased by two to four times for formate, acetate and oxalate in comparison to existing extraction methods without pressurisation and with demineralised water. This shows the importance of pressure for the simulation of true in-situ conditions and suggests that the amount of bioavailable LMWOAs is higher than previously thought. With the increase in carbon capture and storage (CCS) and the enhanced recovery of oil and gas (EOR/EGR), more and more CO2 becomes injected into the underground. However, the effects of elevated concentrations of carbon dioxide on sedimentary organic matter are rarely investigated. As the incuabtion system allows the manipulation of the composition and partial pressure of dissolved gasses, the effect of highly gas-enriched (CO2, CO2/SO2, CO2/NO2; to simulate flue gas conditions) waters on the extraction yield of LMWOAs from macromolecular organic matter was evaluated. For sub-bituminous coal the concentrations of all LMWAOs decreased upon the addition of gas, irrespective of its composition, whereas for lignite formate always and acetate mostly increased, while oxalate decreased. This suggests an positive effect on the nutrient supply for the subsurface microbiota of lignite layers, as formate and acetate are the most common LMWOAs used for microbial metabolism. In terrestrial mud volcanoes (TMVs), sedimentary material is rapidly ascending from great depth to the surface. Therefore LMWOAs that were produced from buried macromolecular organic matter at depth are also brought up to the surface, and fuel heterotrophic microbial ecosystems at the surface. TMVs represent geochemically and microbiologically diverse habitats, which are supplied with organic substrates and electron acceptors from deep-seated hydrocarbon-generating systems and intersected shallow aquifers, respectively. The main electron donor in TMVs in Azerbaijan is sulphate, and microbial sulphate reduction leads to the production of a wide range of reduced sulphur species that are key players in several biological processes. In our study we estimated the effect of LMWOAs on the sulphur metabolising activity of microorganims in TMVs from Azerbaijan. The addition of a mixture of volatile fatty acids containing acetate and other LMWOAs showed significant positive response to the sulphate reduction rate (SRR) of samples of several mud volcanoes. Further investigations on the temperature dependency of the SRR and the characterisation of thermophilic sulphate-reducing bacteria (SRB) showed a connection between the deep hot subsurface and the surface. N2 - Niedermolekulare organische Säuren (nachfolgend als LMWOAs - low molecular weight organic acids - bezeichnet) stellen wichtige mikrobielle Substrate dar. Jedoch liegen die meisten LMWOAs nicht in freier, bioverfügbarer Form vor, sondern sind vielmehr an hochmolekulare organische Substanzen gebunden, z.B. Kerogen, Lignit und Kohle. Während der geologischen Verbringung in tiefe Erdschichten und der geologischen Reifung von sedimentären hochmolekularen organischen Substanzen, führen biologische und abiologische Prozesse zu einer Freisetzung von LMWOAs in die umgebenden Sedimente. Durch diesen Prozess werden Mikroorganismen in unterirdischen sedimentären Ökosystemen mit essentiellen Nährstoffen versorgt. Um das Nährstoffpotential tief liegender hochmolekularer organischer Substanzen für diverse Ökosystemen abschätzen zu können, ist es notwendig, die Menge an LMWOAs, die an solch eine hochmolekulare Matrix gebunden ist, zu bestimmen. Dabei stellen hoher Druck sowie hohe Temperatur entscheidende Faktoren in tiefen unterirdischen Ökosystemen dar, welche einen signifikanten Einfluss auf chemische Reaktionen haben. Daher ist es für die Abschätzung des Nährstoffpotentials entscheidend, hohen Druck und hohe Temperatur bei der Freisetzung von LMWOAs zu erzeugen, um wahre in situ Bedingungen zu schaffen. In der vorliegenden Arbeit wird ein neu entwickeltes, preiswertes Inkubationssystem für biologische und geologische Proben präsentiert. Es erlaubt die Verwendung von hohem Druck als auch hoher Temperatur sowie eine Unterprobennahme der flüssigen Phase ohne Druckverlust, um den fortlaufende Prozess nicht zu unterbrechen. Bei der Simulierung der Freisetzung von LMWOAs aus sedimentären organischen Substanzen erhält man mit dem neu entwickelten Inkubationssystem realistischere Resultate als mit anderen Extraktionssystemen, wie z.B. eine Soxhlet-Apparatur. Die Extraktionsprodukte verbleiben während der Extraktion im Extraktionsmedium, wodurch die chemischen Bedingungen verändert werden. Kohleproben aus Neuseeland sowie aus Deutschland wurden mittels erhöhter Temperatur (90°C) und Druck (5 MPa) extrahiert. Die wichtigsten LMWOAs, die aus diesen Kohlen freigesetzt wurden, waren Formiat, Acetat und Oxalat. Die Extraktionseffizienz für diese LMWOAs konnte im Vergleich zu existierenden Extraktionsmethoden ohne Druck um den Faktor 2 bis 4 gesteigert werden. Dies zeigt die Bedeutung von Druck bei der Simulation von in situ Bedingungen und legt nahe, dass die Menge an bioverfügbaren LMWOAs größer ist als bisher angenommen. Durch die Zunahme der CO2-Speicherung im Untergrund (carbon capture and storage, CCS) sowie der erweiterten Förderung von Öl und Gas (enhanced recovery of oil and gas, EOR/EGR) wird immer mehr CO2 in den Untergrund gepresst. Jedoch sind die Auswirkungen von erhöhten CO2-Konzentrationen auf sedimentäre organische Materie noch unerforscht. Da mit dem Inkubationssystem die Veränderung der Zusammensetzung und des Partialdruckes von gelösten Gasen möglich ist, wurde der Effekt von hoch mit Gasen (CO2, CO2/SO2, CO2/NO2; um Kraftwerksabgase zu simulieren) angereicherten Wässern auf die Extraktionsausbeute von LMWOAs untersucht. Bei der subbituminösen Kohle zeigte sich eine Abnahme aller LMWOAs-Konzentrationen durch die Lösung von Gas im Extraktionsmedium, wobei die Art des Gases keine Rolle spielte. Bei Lignit konnte hingegen festgestellt werden, dass die Extraktionsausbeute an Formiat immer und an Acetat meistens erhöht wurde, während sie sich bei Oxalat verringerte. Dies deutet auf einen positiven Effekt für die Nährstoffversorgung von Mikroorganismen um Lignit-Lagerstätten an, da Formiat und Acetat die am häufigsten verwendeten LMWOAs im mikrobiellen Stoffwechsel darstellen. In terrestrischen Schlammvulkanen (terrestrial mud volcanoes, TMVs) steigt sedimentäres Material aus großen Tiefen an die Erdoberfläche. Somit werden auch LMWOAs, welche aus hochmolekularen organischen Substanzen freigesetzt werden, an die Oberfläche verbracht, und ermöglichen dort heterotrophe Ökosysteme. TMVs stellen dabei geochemisch und mikrobiell unterschiedliche Habitate dar, welche mit organischen Substraten und Elektronenakzeptoren aus tief liegenden, Kohlenwasserstoffe erzeugenden Systemen versorgt werden. In TMVs in Aserbaidschan stellt Sulfat den Hauptelektronenakzeptor dar, wobei mikrobielle Sulfatreduktion zu einer Vielzahl an reduzierten Schwefelspezies führt. In der vorliegenden Arbeit wurde der Effekt von LMWOAs auf die Aktivität von Mikroorganismen bei der Umsetzung von Schwefel in TMVs in Aserbaidschan untersucht. Die Zugabe einer Mischung verschiedener kurzkettiger Fettsäuren zu Schlammproben verschiedener TMVs erzeugte eine signifikant positive Reaktion in Bezug auf die Sulfat-Reduktionsraten. Weiterführende Untersuchungen zur Temperaturabhängigkeit der Sulfat-Reduktionsraten und die Charakterisierung thermophiler, Sulfat-Reduzierender Bakterien zeigte eine Verbindung zwischen der tiefen, heißen Biosphäre und der Erdoberfläche auf. T2 - Freisetzung niedermolekularer organischer Säuren aus sedimentärer organischer Materie und ihre Rolle auf die mikrobielle Aktivität KW - low molecular weight organic acids KW - sedimentary organic matter KW - carbon dioxide KW - high-pressure incubation system KW - microbial activity Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-68830 ER - TY - THES A1 - Wittig, Karen T1 - Untersuchungen zum Time - Term - Verfahren und seiner Anwendung in der Pn-Tomographie am Beispiel seismischer Feldmessungen in Südafrika Y1 - 2012 CY - Potsdam ER - TY - THES A1 - Grochowska, Marta T1 - Ökonomische, soziale und räumliche Folgen der saisonalen Arbeitsmigration im Herkunftsgebiet : am Beispiel der Region Konin (Polen) T1 - Economic, social and spatial consequences of seasonal migration in the place of origin – case study : Konin (Poland) N2 - Die vorliegende Arbeit basiert auf Forschungen in den Jahren 2007-2009. Sie betrachtet die saisonale Arbeitsmigration aus der polnischen Region Konin, wo die Arbeitsmigration aus ökonomischen Gründen, wie auch in ähnlich strukturierten Gebieten Polens, eine lange Tradition hat, die bis ins 19. Jahrhundert zurückgeht. Sie wird die saisonale Migration ins Ausland mit den ökonomischen, sozialen und räumlichen Auswirkungen aus der Perspektive des Einzelnen und seiner unmittelbaren Umgebung, aber auch der Gesellschaft und Herkunftsgebiet der Migranten betrachtet. N2 - Mobility for economic reasons is treated in science primarily from the perspective of permanent resettlement. However, other varieties of migration are more and more often studied. This paper deals with the seasonal migration for economic reasons, which is an important area of migration undertaken for economic reasons. Seasonal migration, which leads to crossing the country borders, in the literature is called the Transnational Migration. Unlike international migration, which is usually connected with a permanent settling in the target area, the concept of Transnational migration describes the situation, in which migrants return to their place of origin and do not give it up as their main residence, but every time they travel to another country to get employed. As a research area of this work, the Konin region was chosen, because - in comparison with other regions in Poland - the phenomenon of a very high level of seasonal migration was observed there. Seasonal labor migration is a long tradition that goes back to 19. century here and in other Polish regions with similar structure. From the results of conducted in 2007−2009 research, some general facts can be drawn. Due to the seasonal work abroad, a seasonal migrant can increase their and their family’s standard of living. If the cost of living in the place of seasonal work is higher than in the place of origin, the profit of such visits is obviously higher if the family of a seasonal worker remains in the place of origin. This leads to the geographic division bet389 ween the place of working and place of permanent residence. Higher wages can be determined at the level of benefits to both personal and societal level. On the other hand, both forprofit workers and society in dealing with this phenomenon, costs cannot be ignored. This paper considers the pros and cons of seasonal paid work, both from the perspective of individuals and their surroundings, and the consequences for society and region of origin of the employee. This paper is considering economic, social and spatial consequences, each time at the macro and micro levels. The study was based primarily on interviews with several respondents and experts in the subject of Polish and German migrations for profit. T3 - Potsdamer Geographische Forschungen - 29 KW - saisonale Arbeitsmigration KW - transnationale Migration KW - Transnationalismus KW - Polen KW - Region Konin KW - Sachsengängerei KW - seasonal labor migration KW - transnational migration KW - transnationalism KW - Poland KW - Konin region KW - Sachsengängerei Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-49649 SN - 978-3-86956-137-0 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - THES A1 - Polanski, Stefan T1 - Simulation der indischen Monsunzirkulation mit dem Regionalen Klimamodell HIRHAM T1 - Simulation of the Indian Monsoon Circulation with the regional climate model HIRHAM N2 - In dieser Arbeit wird das regionale Klimamodell HIRHAM mit einer horizontalen Auflösung von 50 km und 19 vertikalen Schichten erstmals auf den asiatischen Kontinent angewendet, um die indische Monsunzirkulation unter rezenten und paläoklimatischen Bedingungen zu simulieren. Das Integrationsgebiet des Modells erstreckt sich von etwa 0ºN - 50ºN und 42ºE - 110ºE und bedeckt dabei sowohl die hohe Topographie des Himalajas und Tibet Plateaus als auch den nördlichen Indischen Ozean. Das Ziel besteht in der Beschreibung der regionalen Kopplung zwischen der Monsunzirkulation und den orographischen sowie diabatischen Antriebsmechanismen. Eine 44-jährige Modellsimulation von 1958-2001, die am seitlichen und unteren Rand von ECMWF Reanalysen (ERA40) angetrieben wird, bildet die Grundlage für die Validierung der Modellergebnisse mit Beobachtungen auf der Basis von Stations- und Gitterdatensätzen. Der Fokus liegt dabei auf der atmosphärischen Zirkulation, der Temperatur und dem Niederschlag im Sommer- und Wintermonsun, wobei die Qualität des Modells sowohl in Bezug zur langfristigen und dekadischen Klimatologie als auch zur interannuellen Variabilität evaluiert wird. Im Zusammenhang mit einer realistischen Reproduktion der Modelltopographie kann für die Muster der Zirkulation und Temperatur eine gute Übereinstimmung zwischen Modell und Daten nachgewiesen werden. Der simulierte Niederschlag zeigt eine bessere Übereinstimmung mit einem hoch aufgelösten Gitterdatensatz über der Landoberfläche Zentralindiens und in den Hochgebirgsregionen, der den Vorteil des Regionalmodells gegenüber der antreibenden Reanalyse hervorhebt. In verschiedenen Fall- und Sensitivitätsstudien werden die wesentlichen Antriebsfaktoren des indischen Monsuns (Meeresoberflächentemperaturen, Stärke des winterlichen Sibirischen Hochs und Anomalien der Bodenfeuchte) untersucht. Die Ergebnisse machen deutlich, dass die Simulation dieser Mechanismen auch mit einem Regionalmodell sehr schwierig ist, da die Komplexität des Monsunsystems hochgradig nichtlinear ist und die vor allem subgridskalig wirkenden Prozesse im Modell noch nicht ausreichend parametrisiert und verstanden sind. Ein paläoklimatisches Experiment für eine 44-jährige Zeitscheibe im mittleren Holozän (etwa 6000 Jahre vor heute), die am Rand von einer globalen ECHAM5 Simulation angetrieben wird, zeigt markante Veränderungen in der Intensität des Monsuns durch die unterschiedliche solare Einstrahlung, die wiederum Einflüsse auf die SST, die Zirkulation und damit auf die Niederschlagsmuster hat. N2 - In this study the regional climate model HIRHAM with a horizontal resolution of 50 km and 19 vertical levels is applied over the Asian continent to simulate the Indian monsoon circulation under present-day and past conditions. The integration domain extends from 0ºN - 50ºN and 42ºE - 110ºE and covers the high topography of Himalayas and Tibetan Plateau as well as the northern Indian Ocean. The main objective is the description of the regional coupling between monsoon circulation and orographic as well as thermal driving mechanisms of monsoon. A 44-years long simulation from 1958-2001, driven at the lateral and lower boundaries by European reanalysis (ERA40), is the basis for the validation of model results with observations based on station and gridded data sets. The focus is on the the long-term and decadal summer and winter monsoon climatology and its variability concerning atmospheric circulation, temperature and precipitation. The results successfully reproduce the observations due to a realistic simulation of topographic features. The simulated precipitation shows a better agreement with a high-resolution gridded data set over the central land areas of India and in the higher elevated Tibetan and Himalayan regions than ERA40. In different case and sensitivity studies the main driving mechanisms of the Indian monsoon (Sea Surface Temperatures, strength of the Siberian High in winter and soil moisture anomalies) are investigated. The results show, that the simulation of these mechanisms with a regional climate model is also difficult related to the complex non linear monsoon system and the small-scale processes, which are not just sufficiently parameterized and understood in the model. A paleoclimatic experiment for a 44-years long time slice in mid-holocene (6000 years before present), which is driven by a global ECHAM5 simulation, shows significant changes in the monsoon intensity due to the different solar forcing, which influences the SST, the circulation and the precipitation. KW - Indische Monsunzirkulation KW - regionales Klimamodell KW - Indian Monsoon Circulation KW - Regional Climate Model Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-52508 ER - TY - THES A1 - Meyer, Sven Walter Heinrich T1 - Entwicklung und Erprobung von methodischen Grundlagen zur Konzipierung eines Entscheidungshilfesystems für die Begründung von Extremstandorten Y1 - 2011 CY - Potsdam ER - TY - THES A1 - Nada, Wael Mohamed Abdel-Rahman T1 - Wood compost process engineering, properties and its impact on extreme soil characteristics N2 - The landfilling of biodegradable waste is proven to contribute to environmental degradation. Much wood and lumber is discharged as waste from the cleared fields. These woody wastes are subsequently disposed of by burning. However, it would be preferable to dispose of them without combustion to avoid the release of carbon dioxide, one of the critical greenhouse gases. Instead of burning these woody wastes, we should recycle them as future resources. One solution to this problem is to make compost from the waste. Compost use in agriculture is increasing as both an alternative to landfilling for the management of biodegradable waste, as well as means of increasing or preserving soil organic matter. This research aimed to contribute to the identification of a system for managing the production and utilization of wood waste (Quercus rubra and Pinus sylvestris) compost for sustainable agriculture, with particular regards to carbon dioxide produced from both compost and combustion of wood. Compost of wood was implemented in two consecutive trials. The first was carried out in greenhouse experiment in 4 liter pot of Quercus rubra and Pinus sylvestris (QR and PS) moisted by compost and tap water and infected by tiger worm (Eisenia fetida, EF) and European night crawlers (Dendrobaena veneta, DV) at different mixed ratios with lake mud (LM). The second was conducted in greenhouse experiment in 40 liter pot of the successful wood and worm from the first compost trial (QR and EF respectively). The tested wood (QR) was mixed separately by lake mud and horse manure and irrigated by compost and tap water. The final product, successful wood compost (QR) produced from the first trial (4 liter pot) was utilized in different mixed ratios with coal mine tailings (tertiary sand) in greenhouse pot trial to study his effects on improving soil physical and chemical properties and some plant growth parameters of RSM 7.2.1 grass. The wood compost produced from the second compost experiment (40 liter pot) and other artificial component named Arkadolith® were used as soil amelioration in field experiments of different selected sites with extremely unsuitable characteristics (tertiary and quaternary sand in Lusatia lignite region, Germany). The soil in each site was sowed by RSM 7.2.1 and autochthonous grasses. Also, some vermicompost samples were selected to study its thermal stability which compared with a soil sample (Niedermoorgleys) by using thermogravimetric analysis technique. Further investigation was achieved to evaluate the effect of charcoal as a source of carbon on vermicompost stability. Moreover some selected vermicompost samples were used to examine its microstructure under scanning electron microscope which compared also with the same soil used in thermal analysis. The obtained results under all studied experiments can be arranged as follow: First compost trial, Cumulative amount of carbon dioxide produced during composting period was lower than that evolved by combustion of wood. The results showed composting of wood can reduce the emitted CO2 up to 50 % when compared with the amount of CO2 produced from combustion of wood. The effect of different studied factors on different studied parameters show that, QR wood compost have more responsive to decomposition processes and humification rate in comparison with PS wood compost. Under different infection worms, Eisenia fetida (EF) was better than Dendrobaena veneta (DV) in biodegradation rate. Compost water has had a better impact of tap water in all studied decomposition parameters. For example, The compost content of OM and total OC was decreased with the increase of the decomposition period in the treatments of compost water and EF worm, where this decrease was higher at mixed ratio of 1:3 (wood: mud, w/w). The total content of N in the final products takes reversible trend regarding to OM and C content. The high content of N was found in QR wood compost moisted by compost water and infected by EF worm. The content of both macro-and micro-nutrients was clearly positive affected by the studied factors. The content of these nutrients in QR wood compost was higher than that found in the compost of PS wood. Second compost trial, The observed data show that, the amount of CO2 produced by composting was lower than that evolved by combustion of wood. Composting of wood reduced CO2 emission up to 40 % of the combustion wood CO2. Cumulative amount of CO2 produced from wood compost treated by horse manure was higher than that fount in the other treated by LM. The compost of wood treated by horse manure has had a high decomposition rate in comparison with that treated by lake mud. The treatments left without worms during all composting period and moisted by compost water have a responsive effects but it was lower than that infected by worms. Total and available contents of N, P, K, Mg, Zn, and Cu in the compost treated by HM were higher than that found in compost treated by LM. The other nutrients (Ca, Fe, Cu, and Mn) take reversible trend, which it was higher in LM than HM treatments. Thermal and microstructure analysis, The selected vermicompost samples from both first and second compost experiments showed, up to 200° C temperature the mass loss was due to free water and bound water (It was in vermicompost samples higher than soil sample). Mass loss from 200 to 550° C is due to easily oxidizable organic forms and it was higher in vermicompost than soil. In this stage the soil OM seems to be more stable than vermicompost which can be explained by a more intensive bond between the organic and inorganic components. At higher temperatures (T> 550° C) no significant detectable was appeared of soil organic matter. In contrast, the vermicompost treatments showed a high proportion of stable groups, especially aromatic compounds. These statements seem to be importance particularly for the practical application of the wood compost in terms of their long-term effect in the soil. The application of charcoal, showed no additional stabilizing effect of vermicompost. Also, the data show that, vermicompost structure characterized with high homogeneity and ratio of surface area to volume compared to those in soil structure. First plant trials (greenhouse), Different compost mixed ratios had positive impact on different extreme soil physiochemical properties. At the end of experiment (42 days) compost increased soil water holding capacity, decreased soil bulk and particle density and increased total porosity. The used wood compost modified soil buffering capacity and soil acidity. The availability of soil macro and micro nutrients were increased after adding wood compost. The wood compost had a positive effect in some growth parameters like fresh and dry matter yield of the selected grass. High dry matter yield and nutrients uptake was achieved with higher rates of compost application (25.0% > 12.5% > 3.0% > 0.0 %, w/w). Second plant trials (field experiment), Regarding to the effect of wood compost (QR) and Arkadolith® component on tertiary and quaternary sand, at the end of grown season (6 month) most soil and plant characteristics of tertiary sand were improved and it was better than that in quaternary sand. This trend reveals to, physical and chemical properties of tertiary sand was better than that in quaternary sand, like organic matter content, CEC, WHC, TOC, available nutrients. In the both sites, the effects of different type of soil conditioners arranged as follow: the treatments treated with wood compost is the better followed by the other treated with both wood compost and Arkadolith. Wood compost increased soil pH, CEC, soil buffering capacity, OM content, and soil WHC in comparison with Arkadolith which make a small improvement of these properties in both sites. Finally, Different growth parameters (height, covering, fresh and dry matter yield) of the used grasses were clearly positive affected by wood compost, with the highest production inherent to the treatments treated by the high amount of wood compost. N2 - Entsprechend der Zielstellung wurden zunächst verschiedene Varianten der Kompostierung von Holzsubstanz getestet, um eine optimale Technologie, die auch für Entwicklungsländer realisierbar ist, herauszufinden. Hierzu sind in Pflanztöpfe Holzspäne (Woodchips) von zwei verschieden Holzarten (Laub- und Nadelholz) gefüllt und mit verschiedenen natürlichen Stickstoffquellen gemischt worden. Diese Ansätze wurden regelmäßig mit Kompostwasser appliziert. Nach vier Wochen sind zwei verschiedene Wurmarten (Dendrobaena veneta und Eisenia fetida) hinzugegeben worden. Die Feuchthaltung erfolgte ab diesem Zeitpunkt durch Frischwasser. Die qualitativ beste Versuchsvariante ist im nächsten Schritt mit weiteren natürlichen Stickstoffquellen, die in Entwicklungsländern zur Verfügung gestellt werden könnten, getestet worden. Von allen Kompostvarianten sind im Labor eine Vielzahl von bodenphysikalischen (z.B. Dichte, Wasserhaltekapazität) und bodenchemischen Zustandsgrößen (z.B. Elektrische Leitfähigkeit, Totalgehalte biophiler Elemente, Bodenreaktion, organische Substanzgehalte, Kationenaustauschkapazität) bestimmt worden. Die Wiederum qualitativ beste Mischung ist in einer weiteren Versuchsreihe in verschiedenen Mengenverhältnissen mit tertiärerem Abraumsand des Braunkohlebergbaus gemischt worden. In diese Versuchsmischungen wurde die Grasmischung RSM 7.2.1 eingesät und regelmäßig bewässert sowie die Wuchshöhe gemessen. Nach 42 Tagen wurden das Gras geerntet und die biometrischen Parameter, die Nährstoffgehalte (pflanzenverfügbare Fraktionen), die Bodenreaktion, die effektive bzw. potentielle Kationenaustauschkapazität sowie die Pufferkapazitäten der Mischsubstrate bestimmt. Die nächsten Versuchsvarianten sind als Feldversuche in der Niederlausitz durchgeführt worden. Für ihre Realisierung wurde als weiterer Zuschlagsstoff Arkadolith® zugemischt. Die Plotflächen sind sowohl auf Abraumsanden des Tertiärs als auch Quartärs angelegt worden. In jeweils eine Subvariante ist RSM 7.2.1, in die andere eine autochthone Grasmischung eingesät worden. Diese Experimente wurden nach 6 Monaten beendet, die Bestimmung aller Parameter erfolgte in gleicher Weise wie bei den Gewächshausversuchen. Auf Basis aller Versuchsreihen konnten die besten Kompostqualitäten und ihre optimalen Herstellungsvarianten ermittelt werden. Eine weitere Aufgabe war es zu untersuchen, wie im Vergleich zur Verbrennung von Holzmasse die CO2-Emission in die Atmosphäre durch Holzkompostierung verringert werden kann. Hierzu wurde während der verschiedenen Kompostierungsvarianten die CO2-Freisetzung gemessen. Im Vergleich dazu ist jeweils die gleiche Masse an Holzsubstanz verbrannt worden. Die Ergebnisse zeigten, dass im Vergleich zu der thermischen Verwertung von Holsubstanz die CO2-Emission bis zu 50 % verringert werden kann. Dem Boden kann darüber hinaus energiereiche organische Substanz zugeführt werden, die eine Entwicklung der Bodenorganismen ermöglicht. Ein weiteres Experiment zielte darauf ab, die Stabilität der Holzkomposte zu bestimmen. Darüber hinaus sollte untersucht werden, ob durch die Zufuhr von pyrogenem Kohlenstoff eine Vergrößerung der Stabilität zu erreichen ist. Diese Untersuchungen wurden mit Hilfe der Thermogravimetrie vorgenommen. Alle wichtigen Kompostierungsvarianten sind sowohl mit verschiedenen Zusatzmengen als auch ohne Zusatz von pyrogenem Kohlenstoff vermessen worden. Als Vergleichssubstanz diente der Oberboden eines Niedermoorgleys, der naturgemäß einen relativ hohen Anteil an organischer Substanz aufweist. Die Ergebnisse zeigten, dass im Bereich niedriger Temperaturen die Wasserbindung im Naturboden fester ist. In der Fraktion der oxidierbaren organischen Substanz, im mittleren Temperaturbereich gemessen, ist die natürliche Bodensubstanz ebenfalls stabiler, was auf eine intensivere Bindung zwischen den organischen und anorganischen Bestandteilen, also auf stabilere organisch-mineralische Komplexe, schlussfolgern lässt. Im Bereich höherer Temperaturen (T> 550° C) waren im Naturboden keine nennenswerten organischen Bestandteile mehr nachweisbar. Hingegen wiesen die Kompostvarianten einen hohen Anteil stabiler Fraktionen, vor allem aromatische Verbindungen, auf. Diese Aussagen erscheinen vor allem für die praktische Anwendung der Holzkomposte in Hinblick auf ihre Langzeitwirkung bedeutsam. Der Zusatz von pyrogenem Kohlenstoff zeigte keine zusätzliche Stabilisierungswirkung. T2 - Holzkompostverfahrenstechnik, Eigenschaften und ihre Auswirkungen auf die extremen Bodeneigenschaften KW - Holzkompost KW - Kohlendioxid KW - Eisenia fetida KW - Dendrobaena veneta KW - Kohlengrubenabraum KW - wood compost KW - carbon dioxide KW - Eisenia fetida KW - Dendrobaena veneta KW - coal mine waste Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-51046 ER -