TY - THES A1 - Baczyński, Krzysztof Konrad T1 - Buckling instabilities of semiflexible filaments in biological systems T1 - Knickinstabilitäten semiflexibler Filamente in biologischen Systemen N2 - In dieser Arbeit werden Knickinstabilitäten von Filamenten in biologischen Systemen untersucht. Das Zytoskelett von Zellen ist aus solchen Filamenten aufgebaut. Sie sind für die mechanische Stabilität der Zelle verantwortlich und spielen eine große Rolle bei intrazellulären Transportprozessen durch molekulare Motoren, die verschiedene Lasten wie beispielsweise Organellen entlang der Filamente des Zytoskeletts transportieren. Filamente sind semiflexible Polymere, deren Biegeenergie ähnlich groß ist wie die thermische Energie, so dass sie auch als elastische Balken auf der Nanoskala gesehen werden können, die signifikante thermische Fluktuationen zeigen. Wie ein makroskopischer elastischer Balken können auch Filamente eine mechanische Knickinstabilität unter Kompression zeigen. Im ersten Teil dieser Arbeit wird untersucht, wie diese Instabilität durch thermische Fluktuationen der Filamente beeinflusst wird. In Zellen können Kompressionskräfte durch molekulare Motoren erzeugt werden. Das geschieht zum Beispiel während der Zellteilung in der mitotischen Spindel. Im zweiten Teil der Arbeit untersuchen wir, wie die stochastische Natur einer von Motoren generierten Kraft die Knickinstabilität von Filamenten beeinflusst. Zunächst stellen wir kurz das Problem von Knickinstabilitäten auf der makroskopischen Skala dar und führen ein Modell für das Knicken von Filamenten oder elastischen Stäben in zwei Raumdimensionen und in Anwesenheit thermischer Fluktuationen ein. Wir präsentieren eine analytische Lösung für Knickinstabilitäten in Anwesenheit thermischer Fluktuationen, die auf einer Renormierungsgruppenrechnung im Rahmen des nichtlinearen Sigma-Models basiert. Wir integrieren die kurzwelligen Fluktuationen aus, um eine effektive Theorie für die langwelligen Moden zu erhalten, die die Knickinstabilität bestimmen. Wir berechnen die Änderung der kritischen Kraft für die Knickinstabilität und zeigen, dass die thermischen Fluktuationen in zwei Raumdimensionen zu einer Zunahme der kritischen Kraft führen. Außerdem zeigen wir, dass thermische Fluktuationen im geknickten Zustand zu einer Zunahme der mittleren projizierten Länge des Filaments in Richtung der wirkenden Kraft führen. Als Funktion der Konturlänge des Filaments besitzt die mittlere projizierte Länge eine Spitze an der Knickinstabilität, die durch thermische Fluktuationen abgerundet wird. Unser Hauptresultat ist die Beobachtung, dass ein geknicktes Filament unter dem Einfluss thermischer Fluktuationen gestreckt wird, d.h. dass seine mittlere projizierte Länge in Richtung der Kompressionskraft auf Grund der thermischen Fluktuationen zunimmt. Unsere analytischen Resultate werden durch Monte-Carlo Simulationen der Knickinstabilität semiflexibler Filamente in zwei Raumdimensionen bestätigt. Wir führen auch Monte-Carlo Simulationen in höheren Raumdimensionen durch und zeigen, dass die Zunahme der projizierten Länge unter dem Einfluss thermischer Fluktuationen weniger ausgeprägt ist und stark von der Wahl der Randbedingungen abhängt. Im zweiten Teil der Arbeit formulieren wir ein Modell für die Knickinstabilität semiflexibler Filamente unter dem Einfluss molekularer Motoren. Wir untersuchen ein System, in dem sich eine Gruppe von Motoren entlang eines fixierten Filaments bewegt, und dabei ein zweites Filament als Last trägt. Das Last-Filament wird gegen eine Wand gedrückt und knickt. Während des Knickvorgangs können die Motoren, die die Kraft auf das Filament generieren, stochastisch von dem Filament ab- und an das Filament anbinden. Wir formulieren ein stochastisches Model für dieses System und berechnen die “mean first passage time“, d.h. die mittlere Zeit für den Übergang von einem Zustand, in dem alle Motoren gebundenen sind zu einem Zustand, in dem alle Motoren abgebunden sind. Dieser Übergang entspricht auch einem Übergang aus dem gebogenen zurück in einen ungebogenen Zustand des Last-Filaments. Unser Resultat zeigt, dass für genügend kurze Mikrotubuli die Bewegung der Motoren von der durch das Last-Filament generierten Kraft beeinflusst wird. Diese Ergebnisse können in zukünftigen Experimenten überprüft werden. N2 - We study buckling instabilities of filaments in biological systems. Filaments in a cell are the building blocks of the cytoskeleton. They are responsible for the mechanical stability of cells and play an important role in intracellular transport by molecular motors, which transport cargo such as organelles along cytoskeletal filaments. Filaments of the cytoskeleton are semiflexible polymers, i.e., their bending energy is comparable to the thermal energy such that they can be viewed as elastic rods on the nanometer scale, which exhibit pronounced thermal fluctuations. Like macroscopic elastic rods, filaments can undergo a mechanical buckling instability under a compressive load. In the first part of the thesis, we study how this buckling instability is affected by the pronounced thermal fluctuations of the filaments. In cells, compressive loads on filaments can be generated by molecular motors. This happens, for example, during cell division in the mitotic spindle. In the second part of the thesis, we investigate how the stochastic nature of such motor-generated forces influences the buckling behavior of filaments. In chapter 2 we review briefly the buckling instability problem of rods on the macroscopic scale and introduce an analytical model for buckling of filaments or elastic rods in two spatial dimensions in the presence of thermal fluctuations. We present an analytical treatment of the buckling instability in the presence of thermal fluctuations based on a renormalization-like procedure in terms of the non-linear sigma model where we integrate out short-wavelength fluctuations in order to obtain an effective theory for the mode of the longest wavelength governing the buckling instability. We calculate the resulting shift of the critical force by fluctuation effects and find that, in two spatial dimensions, thermal fluctuations increase this force. Furthermore, in the buckled state, thermal fluctuations lead to an increase in the mean projected length of the filament in the force direction. As a function of the contour length, the mean projected length exhibits a cusp at the buckling instability, which becomes rounded by thermal fluctuations. Our main result is the observation that a buckled filament is stretched by thermal fluctuations, i.e., its mean projected length in the direction of the applied force increases by thermal fluctuations. Our analytical results are confirmed by Monte Carlo simulations for buckling of semiflexible filaments in two spatial dimensions. We also perform Monte Carlo simulations in higher spatial dimensions and show that the increase in projected length by thermal fluctuations is less pronounced than in two dimensions and strongly depends on the choice of the boundary conditions. In the second part of this work, we present a model for buckling of semiflexible filaments under the action of molecular motors. We investigate a system in which a group of motors moves along a clamped filament carrying a second filament as a cargo. The cargo-filament is pushed against the wall and eventually buckles. The force-generating motors can stochastically unbind and rebind to the filament during the buckling process. We formulate a stochastic model of this system and calculate the mean first passage time for the unbinding of all linking motors which corresponds to the transition back to the unbuckled state of the cargo filament in a mean-field model. Our results show that for sufficiently short microtubules the movement of kinesin-I-motors is affected by the load force generated by the cargo filament. Our predictions could be tested in future experiments. KW - Polymere KW - Filament KW - Elastizität KW - Knickinstabilität KW - molekulare Motoren KW - Polymers KW - filaments KW - elasticity KW - buckling KW - molecular motors Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-37927 ER - TY - JOUR A1 - Ghobadi, Ehsan A1 - Heuchel, Matthias A1 - Kratz, Karl A1 - Lendlein, Andreas T1 - Influence of different heating regimes on the shape-recovery behavior of poly(L-lactide) in simulated thermomechanical tests JF - Journal of applied biomaterials & functional materials N2 - Aim: Multifunctional polymer-based biomaterials, which combine degradability with a shape-memory capability and in this way enable the design of actively moving implants such as self-anchoring implants or controlled release systems, have been recently introduced. Of particular interest are approved degradable polymers such as poly(L-lactide) (PLLA), which can be easily functionalized with a shape-memory effect. In the case of semicrystalline PLLA, the glass transition can be utilized as shape-memory switching domain. Methods: In this work we applied a fully atomistic molecular dynamics simulation to study the shape-memory behavior of PLLA. A heating-deformation-cooling programming procedure was applied to atomistic PLLA packing models followed by a recovery module under stress-free conditions allowing the shape recovery. The recovery was simulated by heating the samples from T-low = 250 K to T-high = 500 K with different heating rates beta of 125, 40 and 4 K.ns(-1). Results: We could demonstrate that the obtained strain recovery rate (R-r) was strongly influenced by the applied simulation time and heating rate, whereby R-r values in the range from 46% to 63% were achieved. On its own the application of a heating rate of 4 K.ns(-1) enabled us to determine a characteristic switching temperature of T-sw = 473 K for the modeled samples. Conclusions: We anticipate that the atomistic modeling approach presented should be capable of enabling further study of T-sw with respect to the molecular structure of the investigated SMP and therefore could be applied in the context of design and development of new shape-memory (bio) materials. KW - Molecular modeling KW - Polymers KW - Shape-memory effect Y1 - 2012 U6 - https://doi.org/10.5301/JABFM.2012.10440 SN - 2280-8000 VL - 10 IS - 3 SP - 259 EP - 264 PB - Wichtig CY - Milano ER - TY - JOUR A1 - Bleek, Katrin A1 - Taubert, Andreas T1 - New developments in polymer-controlled, bioinspired calcium phosphate mineralization from aqueous solution JF - Acta biomaterialia N2 - The polymer-controlled and bioinspired precipitation of inorganic minerals from aqueous solution at near-ambient or physiological conditions avoiding high temperatures or organic solvents is a key research area in materials science. Polymer-controlled mineralization has been studied as a model for biomineralization and for the synthesis of (bioinspired and biocompatible) hybrid materials for a virtually unlimited number of applications. Calcium phosphate mineralization is of particular interest for bone and dental repair. Numerous studies have therefore addressed the mineralization of calcium phosphate using a wide variety of low- and high-molecular-weight additives. In spite of the growing interest and increasing number of experimental and theoretical data, the mechanisms of polymer-controlled calcium phosphate mineralization are not entirely clear to date, although the field has made significant progress in the last years. A set of elegant experiments and calculations has shed light on some details of mineral formation, but it is currently not possible to preprogram a mineralization reaction to yield a desired product for a specific application. The current article therefore summarizes and discusses the influence of (macro)molecular entities such as polymers, peptides, proteins and gels on biomimetic calcium phosphate mineralization from aqueous solution. It focuses on strategies to tune the kinetics, morphologies, final dimensions and crystal phases of calcium phosphate, as well as on mechanistic considerations. KW - Calcium phosphate KW - Biomimetics KW - Mineralization KW - Polymers KW - Bioinspired Y1 - 2013 U6 - https://doi.org/10.1016/j.actbio.2012.12.027 SN - 1742-7061 SN - 1878-7568 VL - 9 IS - 5 SP - 6283 EP - 6321 PB - Elsevier CY - Oxford ER - TY - JOUR A1 - Zhang, Nan A1 - Said, Andre A1 - Wischke, Christian A1 - Kral, Vivian A1 - Brodwolf, Robert A1 - Volz, Pierre A1 - Boreham, Alexander A1 - Gerecke, Christian A1 - Li, Wenzhong A1 - Neffe, Axel T. A1 - Kleuser, Burkhard A1 - Alexiev, Ulrike A1 - Lendlein, Andreas A1 - Schäfer-Korting, Monika T1 - Poly[acrylonitrile-co-(N-vinyl pyrrolidone)] nanoparticles - Composition-dependent skin penetration enhancement of a dye probe and biocompatibility JF - European Journal of Pharmaceutics and Biopharmaceutics N2 - Nanoparticles can improve topical drug delivery: size, surface properties and flexibility of polymer nanoparticles are defining its interaction with the skin. Only few studies have explored skin penetration for one series of structurally related polymer particles with systematic alteration of material composition. Here, a series of rigid poly[acrylonitrile-co-(N-vinyl pyrrolidone)] model nanoparticles stably loaded with Nile Red or Rhodamin B, respectively, was comprehensively studied for biocompatibility and functionality. Surface properties were altered by varying the molar content of hydrophilic NVP from 0 to 24.1% and particle size ranged from 35 to 244 nm. Whereas irritancy and genotoxicity were not revealed, lipophilic and hydrophilic nanoparticles taken up by keratinocytes affected cell viability. Skin absorption of the particles into viable skin ex vivo was studied using Nile Red as fluorescent probe. Whilst an intact stratum corneum efficiently prevented penetration, almost complete removal of the horny layer allowed nanoparticles of smaller size and hydrophilic particles to penetrate into viable epidermis and dermis. Hence, systematic variations of nanoparticle properties allows gaining insights into critical criteria for biocompatibility and functionality of novel nanocarriers for topical drug delivery and risks associated with environmental exposure. KW - Biocompatibility testing KW - Drug delivery systems KW - Nanoparticle KW - Poly[acrylonitrile-co-(N-vinyl pyrrolidone)] KW - Polymers KW - Skin absorption Y1 - 2017 U6 - https://doi.org/10.1016/j.ejpb.2016.10.019 SN - 0939-6411 SN - 1873-3441 VL - 116 SP - 66 EP - 75 PB - Elsevier CY - Amsterdam ER - TY - THES A1 - Cao, Qian T1 - Graphitic carbon nitride and polymer hybrid materials BT - a promising combination for advanced properties N2 - Advanced hybrid materials are recognized as one of the most significant enablers for new technologies, which holds true especially on the quest for sustainable energy sources and energy production schemes (e.g., semiconductor based photocatalytic materials). Usually, a single component is far from meeting all the demands needed for these advanced applications. Hybrid materials are composed of at least two components commonly an inorganic and an organic material on the molecular level, which feature novel properties exceeding the sum of the individual parts and might be the milestones of next-generation applications. This dissertation aims to provide novel combinations of the metal-free semiconductor graphitic carbon nitride (g-C3N4) with polymers to obtain materials with advanced properties and applications. Visible light constitutes the core of the present work as it is the only energy source utilized either in synthesis or in the application process. In the area of applications by combination of g-C3N4 and polymers, two different hybrids were thoroughly elucidated, i.e.. their design and construction as well as potential application in photocatalysis. Novel soft 3D liquid objects were formed via charge-interaction driven interfacial jamming between polyelectrolytes in aqueous environment and colloidal dispersions of g-C3N4 in edible sunflower oil. As such, stable liquid objects could be molded into specific shapes and utilized for photodegradation of organic dyes in water. Furthermore, the grafting of polymers onto g-C3N4 was investigated. Allyl-end functionalized polymers were grafted onto g-C3N4 by a photoinitiated process to yield g-C3N4 with versatile and improved properties, e.g. advanced dispersibility enabling processing via spin coating. As g-C3N4 produces radicals under visible light irradiation, which is of significant interest for polymer science, g-C3N4 containing polymer latex and macrogel beads (MGB) were synthesized by emulsion photopolymerization and inverse suspension photopolymerization, respectively. A well-controlled emulsion photopolymerization process via g-C3N4 initiation was designed, which features synthesis of well-defined and cross-linked polymer particles. Furthermore, the polymerization process was investigated thoroughly, indicating an ad-layer polymerization in early stages of the process. The utilization of functionalized g-C3N4 allowed the polymerization of various monomer types. Moreover, g-C3N4 was utilized as photoinitiator in hydrogel MGB formation. The formed MGB properties could be tailored via process design, e.g. stirring rate, cross-linker content and g-C3N4 content. Finally, MGBs were introduced as photocatalyst for waste water remediation, i.e. the degradation of Rhodamine B in aqueous solution was studied. The present thesis therefore builds a bridge between g-C3N4 and polymers and provides strategies for hybrid material formation. Furthermore, several potential applications are revealed with significant implications for photocatalysis, polymerization processes and polymer materials. KW - Graphitic carbon nitride KW - Hybrid materials synthesis KW - Polymers KW - Photopolymerization Y1 - 2020 ER - TY - THES A1 - Kaestner, Pia Isabel T1 - Neue Polymermaterialien auf der Basis von funktionalisierten ionischen Flüssigkeiten zur potentiellen Anwendung in Membranen T1 - New polymer materials based on functionalized ionic liquids for potential application in membranes N2 - Die vorliegende Arbeit thematisiert die Synthese und Charakterisierung von neuen funktionalisierten ionischen Flüssigkeiten und deren Polymerisation. Die ionischen Flüssigkeiten wurden dabei sowohl mit polymerisierbaren Kationen als auch Anionen hergestellt. Zum einen wurden bei thermisch initiierten Polymerisationen Azobis(isobutyronitril) (AIBN) verwendet und zum anderen dienten bei photochemisch initiierten Polymerisationen Bis-4-(methoxybenzoyl)diethylgermanium (Ivocerin®) als Radikalstarter. Mittels Gelpermeationschromatographie konnte das Homopolymer Polydimethylaminoethylmethacrylat untersucht werden, welches erst im Anschluss an die GPC-Messungen polymeranalog modifiziert wurde. Dabei wurden nach einer Quaternisierung und anschließender Anionenmetathese bei diesen Polymeren die Grenzviskositäten bestimmt und mit den Grenzviskositäten der direkt polymerisierten ionischen Flüssigkeiten verglichen. Bei der direkten Polymerisation von Poly(N-[2-(Methacryloyloxy)ethyl]-N-butyl-N,N-dimethyl-ammoniumbis(trifluormethylsulfonyl)imid) lag [η_Huggins] bei 100 mL/g und bei dem polymeranalog hergestellten Polymer betrug [η_Huggins] = 40 mL/g. Die ionischen Flüssigkeiten mit polymerisierbaren funktionellen Gruppen wurden mittels Photo-DSC hinsichtlich der maximalen Polymerisationsgeschwindigkeit (Rpmax), der Zeit, in der dieses Maximum erreicht wurde, tmax, ihrer Glasüberganstemperatur (Tg) und des Umsatzes an Vinylprotonen untersucht. Bei diesen Messungen wurde zum einen der Einfluss der unterschiedlichen Alkylkettenlänge am Ammoniumion und der Einfluss von verschiedenen Anionen bei gleichbleibender Kationenstruktur analysiert. So polymerisierte das ethylsubstituierte Kation mit einer tmax von 21 Sekunden am langsamsten. Die maximale Polymerisationsgeschwindigkeit (Rpmax) betrug 3.3∙10-2 s-1. Die tmax Werte der übrigen alkylsubstituierten ionischen Flüssigkeiten mit einer polymerisierbaren funktionellen Gruppe hingegen lagen zwischen 10 und 15 Sekunden. Die Glasübergangstemperaturen der mittels photoinduzierter Polymerisation hergestellten Polymere lagen mit 44 bis 55 °C nahe beieinander. Alle Monomere zeigten einen hohen Umsatz der Vinylprotonen; er betrug zwischen 93 und 100%. Mithilfe einer Bandanlage, ausgerüstet mit einer LED (λ = 395 nm), konnten Polymerfilme hergestellt werden. Der Umsatz an Doppelbindungsäquivalenten dieser Filme wurde anhand der 1H-NMR Spektroskopie bestimmt. Bei der dynamisch-mechanischen Analyse wurden die Polymerfilme mit einer konstanten Heizrate und Frequenz periodisch wechselnden Beanspruchungen ausgesetzt, um die Glasübergangstemperaturen zu bestimmen. Die niedrigste Tg mit 26 °C besaß das butylsubstituierte N-[2-(Methacryloyloxy)ethyl]-N-butyl-N,N-dimethyl-ammoniumbis(trifluormethylsulfonyl)imid, welches als Polymerfilm mit Ivocerin® als Initiator hergestellt wurde, wohingegen die höchste Tg bei dem gleichen Polymer, welches direkt durch freie radikalische Polymerisation der ionischen Flüssigkeit in Masse mit AIBN hergestellt wurde, 51 °C betrug. Zusätzlich wurden die Filme unter dem Aspekt der Topographie mit einem Rasterkraftmikroskop untersucht, welches eine Domänenstruktur des Polymers N-[2-(methacryloyloxy)ethyl]-N-butyl-N,N-dimethyl-ammonium tris(pentafluorethyl)trifluorphosphat offenbarte. N2 - This work focuses on the synthesis and characterization of novel functionalized ionic liquids and their polymerization. The structural differences were caused by both polymerizable cations and anions. Initiation of free radical polymerization was carried out either thermally or photoinduced. 2,2′-Azobis(2-methylpropionitrile) (AIBN) was used for thermal initiation of polymerization and bis-4-(methoxybenzoyl)diethylgermane (Ivocerin®) was used as photoinitiator for photopolymerization. Intrinsic viscosity was determined from ionic polymers, which were synthesized by bulk polymerization of ionic liquid monomers. Size exclusion chromatography was employed to determine the polydispersity of poly dimethylaminoethylmethacrylate, which was subsequently modified by quaternization and anion metathesis. After alkylation and metathesis of this polymer, intrinsic viscosity was also determined for the modified polymer. In the direct polymerization of poly(N-[2-(methacryloyloxy)ethyl]-N-butyl-N,N-dimethyl-ammonium bis(trifluoromethylsulfonyl)imide), [η_Huggins] was 100 mL/g and in the analogously produced polymer [η_Huggins] was 40 mL/g. The investigation of ionic liquid monomers regarding the exposure to UV-light (λ = 395 nm) resulted in Photo-DSC measurements. These were employed to investigate the polymerization rate (Rpmax) and the corresponding time (tmax); these parameters describe the reactivity of the compounds. The influence of the different alkyl chain length was also examined. Conversion of double bonds was determined using NMR spectroscopy, and glass transition temperatures (Tg) were identified by DSC measurements. The same sample, which was used for Photo-DSC measurements, was also used for DSC measurements. The ionic liquid monomer with an ethyl group at the quaternized nitrogen polymerized slowest with a tmax value of 21 seconds. The corresponding polymerization rate (Rpmax) was 3.3∙10-2 s-1. The tmax values of the other alkyl-substituted ionic liquid monomers were between 10 and 15 seconds. The glass transition temperatures of those photochemically obtained polymers were close together: 44 – 55 °C. With 93 to 100% they all had a high conversion of double bonds in common. Polymer films were produced using a lab-sized conveyor system equipped with an LED (λ = 395 nm). The conversion of double bond equivalents of these films was determined by NMR spectroscopy. In dynamic mechanical analysis, the polymer films were subjected to periodically changing stresses at a constant heating rate and frequency to determine the glass transition temperatures. The lowest Tg of 26 °C was obtained with the butyl-substituted N-[2-(methacryloyloxy)ethyl]-N-butyl-N,N-dimethyl-ammonium bis-(trifluoromethylsulfonyl)imide prepared as a polymer film with Ivocerin® as initiator, whereas the highest Tg was 51 °C for the same polymer prepared directly by free radical polymerization of the ionic liquid in bulk with AIBN. In addition, the films were examined under the aspect of topography with an atomic force microscope, which revealed a domain structure of the polymer N-[2-(methacryloyloxy)ethyl]-N-butyl-N,N-dimethyl-ammonium tris(pentafluoroethyl)trifluorophosphate. KW - Polymere KW - Polymers KW - Polymerisierbare ionische Flüssigkeiten KW - Ionic liquid monomers KW - Gasselektive Membranen KW - Gas selective membranes KW - Photoinduzierte Polymerisation KW - photo induced polymerization KW - Polymerfilme KW - Polymer films Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-509403 ER - TY - JOUR A1 - Lendlein, Andreas A1 - Heuchel, Matthias T1 - Shape-memory polymers designed in view of thermomechanical energy storage and conversion systems BT - Effective temporary shape fixation by strain-induced formation of supramolecular nanostructures enables high energy density one-way shape-memory polymers JF - ACS central science KW - Actuators KW - Deformation KW - Energy KW - Energy storage KW - Polymers Y1 - 2021 U6 - https://doi.org/10.1021/acscentsci.1c01032 SN - 2374-7951 VL - 7 IS - 10 SP - 1599 EP - 1601 PB - American Chemical Society CY - Washington ER -