TY - JOUR A1 - Farkas Csamangó, Erika ED - Badó, Attila ED - Belling, Detlev W. T1 - Hungarian Legislation on Climate Protection JF - Rechtsentwicklungen aus europäischer Perspektive im 21. Jahrhundert Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-74583 IS - 2 SP - 153 EP - 162 ER - TY - GEN A1 - Farhy, Yael A1 - Veríssimo, Joao Marques A1 - Clahsen, Harald T1 - Universal and particular in morphological processing BT - evidence from Hebrew T2 - Postprints der Universität Potsdam : Humanwissenschaftliche Reihe N2 - Do properties of individual languages shape the mechanisms by which they are processed? By virtue of their non-concatenative morphological structure, the recognition of complex words in Semitic languages has been argued to rely strongly on morphological information and on decomposition into root and pattern constituents. Here, we report results from a masked priming experiment in Hebrew in which we contrasted verb forms belonging to two morphological classes, Paal and Piel, which display similar properties, but crucially differ on whether they are extended to novel verbs. Verbs from the open-class Piel elicited familiar root priming effects, but verbs from the closed-class Paal did not. Our findings indicate that, similarly to other (e.g., Indo-European) languages, down-to-the-root decomposition in Hebrew does not apply to stems of non-productive verbal classes. We conclude that the Semitic word processor is less unique than previously thought: Although it operates on morphological units that are combined in a non-linear way, it engages the same universal mechanisms of storage and computation as those seen in other languages. T3 - Zweitveröffentlichungen der Universität Potsdam : Humanwissenschaftliche Reihe - 468 KW - language universals KW - morphology KW - priming KW - Semitic Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-412541 EP - 468 ER - TY - THES A1 - Farhy, Yael T1 - Universals and particulars in morphology T1 - Universalien und Einzelheiten in der Morphologie BT - processing and generalization in native and non-native speakers of Hebrew BT - Verarbeitung und Generalisierung bei hebräischen Muttersprachlern und Nicht-Muttersprachlern N2 - For many years, psycholinguistic evidence has been predominantly based on findings from native speakers of Indo-European languages, primarily English, thus providing a rather limited perspective into the human language system. In recent years a growing body of experimental research has been devoted to broadening this picture, testing a wide range of speakers and languages, aiming to understanding the factors that lead to variability in linguistic performance. The present dissertation investigates sources of variability within the morphological domain, examining how and to what extent morphological processes and representations are shaped by specific properties of languages and speakers. Firstly, the present work focuses on a less explored language, Hebrew, to investigate how the unique non-concatenative morphological structure of Hebrew, namely a non-linear combination of consonantal roots and vowel patterns to form lexical entries (L-M-D + CiCeC = limed ‘teach’), affects morphological processes and representations in the Hebrew lexicon. Secondly, a less investigated population was tested: late learners of a second language. We directly compare native (L1) and non-native (L2) speakers, specifically highly proficient and immersed late learners of Hebrew. Throughout all publications, we have focused on a morphological phenomenon of inflectional classes (called binyanim; singular: binyan), comparing productive (class Piel, e.g., limed ‘teach’) and unproductive (class Paal, e.g., lamad ‘learn’) verbal inflectional classes. By using this test case, two psycholinguistic aspects of morphology were examined: (i) how morphological structure affects online recognition of complex words, using masked priming (Publications I and II) and cross-modal priming (Publication III) techniques, and (ii) what type of cues are used when extending morpho-phonological patterns to novel complex forms, a process referred to as morphological generalization, using an elicited production task (Publication IV). The findings obtained in the four manuscripts, either published or under review, provide significant insights into the role of productivity in Hebrew morphological processing and generalization in L1 and L2 speakers. Firstly, the present L1 data revealed a close relationship between productivity of Hebrew verbal classes and recognition process, as revealed in both priming techniques. The consonantal root was accessed only in the productive class (Piel) but not the unproductive class (Paal). Another dissociation between the two classes was revealed in the cross-modal priming, yielding a semantic relatedness effect only for Paal but not Piel primes. These findings are taken to reflect that the Hebrew mental representations display a balance between stored undecomposable unstructured stems (Paal) and decomposed structured stems (Piel), in a similar manner to a typical dual-route architecture, showing that the Hebrew mental lexicon is less unique than previously claimed in psycholinguistic research. The results of the generalization study, however, indicate that there are still substantial differences between inflectional classes of Hebrew and other Indo-European classes, particularly in the type of information they rely on in generalization to novel forms. Hebrew binyan generalization relies more on cues of argument structure and less on phonological cues. Secondly, clear L1/L2 differences were observed in the sensitivity to abstract morphological and morpho-syntactic information during complex word recognition and generalization. While L1 Hebrew speakers were sensitive to the binyan information during recognition, expressed by the contrast in root priming, L2 speakers showed similar root priming effects for both classes, but only when the primes were presented in an infinitive form. A root priming effect was not obtained for primes in a finite form. These patterns are interpreted as evidence for a reduced sensitivity of L2 speakers to morphological information, such as information about inflectional classes, and evidence for processing costs in recognition of forms carrying complex morpho-syntactic information. Reduced reliance on structural information cues was found in production of novel verbal forms, when the L2 group displayed a weaker effect of argument structure for Piel responses, in comparison to the L1 group. Given the L2 results, we suggest that morphological and morphosyntactic information remains challenging for late bilinguals, even at high proficiency levels. N2 - Diese Dissertation untersucht, wie die morphologische Verarbeitung und Generalisierung von der Sprache und den Sprechern beeinflusst werden. Die Arbeit fokussiert sich auf die hebräische Sprache und analysiert, wie ihre ungewöhnliche, nicht-verkettende morphologische Struktur, die die Kombination von Wurzelkonsonanten und Vokalmustern umfasst (z. B. L-M-D + CiCeC = limed ‚beibringen‘), die Organisation von komplexen Repräsentationen im mentalen Lexikon beeinflusst. Dieser Aspekt wird im Hinblick auf zwei Sprechergruppen betrachtet: hebräische Muttersprachler und Nicht-Muttersprachler, die aber ein hohes Sprachniveau erworben haben. Alle vier Publikationen der Dissertation behandeln das morphologische Phänomen von Flexionsklassen in Verben (auf Hebräisch: binyanim) und vergleichen eine produktive Klasse und eine unproduktive Klasse mithilfe von empirischen Methoden wie Worterkennung mit Priming und Produktion von neuartigen Wörtern. Die Ergebnisse zeigten erstens eine enge Verbindung zwischen der Produktivität einer Klasse und Worterkennungsprozessen, wie dies auch in anderen indoeuropäischen Sprachen der Fall ist, in denen die Erkennung von produktiven morphologischen Schemata (z. B. gefragt) durch eine Dekomposition von Wortbestandteilen ausgeführt wird. Die Erkennung von unproduktiven morphologischen Schemata (z. B., geschlafen) wird jedoch nicht durch eine Dekomposition ausgeführt. In Bezug darauf ergaben die Ergebnisse der Produktionsstudie jedoch, dass es einen Unterschied zwischen dem hebräischen und indoeuropäischen Sprachen gibt, besonders in der Art der Information, auf die die Sprecher sich verlassen, wenn sie neue Wörter formulieren. In einem zweiten Ergebnis wurden bedeutende Unterschiede zwischen Muttersprachlern und Nicht-Muttersprachlern hinsichtlich Worterkennung und Produktion beobachtet. Beide Experimente wiesen eine eingeschränkte Sensitivität der Nicht-Muttersprachler für abstrakte morphologische und morpho-syntaktische Informationen nach. KW - psycholinguistics KW - morphology KW - Hebrew KW - second language KW - Psycholinguistik KW - Morphologie KW - Hebräisch KW - Nicht-Muttersprachler Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-470033 ER - TY - GEN A1 - Farhan, Muhammad A1 - Chaudhary, Deeptangshu A1 - Nöchel, Ulrich A1 - Behl, Marc A1 - Kratz, Karl A1 - Lendlein, Andreas T1 - Electrical actuation of coated and composite fibers based on poly[ethylene-co-(vinyl acetate)] T2 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Robots are typically controlled by electrical signals. Resistive heating is an option to electrically trigger actuation in thermosensitive polymer systems. In this study electrically triggerable poly[ethylene-co-(vinyl acetate)] (PEVA)-based fiber actuators are realized as composite fibers as well as polymer fibers with conductive coatings. In the coated fibers, the core consists of crosslinked PEVA (cPEVA), while the conductive coating shell is achieved via a dip coating procedure with a coating thickness between 10 and 140 mu m. The conductivity of coated fibers sigma = 300-550 S m(-1) is much higher than that of the composite fibers sigma = 5.5 S m(-1). A voltage (U) of 110 V is required to heat 30 cm of coated fiber to a targeted temperature of approximate to 65 degrees C for switching in less than a minute. Cyclic electrical actuation investigations reveal epsilon '(rev) = 5 +/- 1% reversible change in length for coated fibers. The fabrication of such electro-conductive polymeric actuators is suitable for upscaling so that their application potential as artificial muscles can be explored in future studies. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1375 KW - artificial muscles KW - fiber actuators KW - resistive heating KW - shape‐memory polymer actuators KW - soft robotics Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-571679 SN - 1866-8372 IS - 2 ER - TY - GEN A1 - Fanselow, Gisbert A1 - Schlesewsky, Matthias A1 - Cavar, Damir A1 - Kliegl, Reinhold T1 - Optimal parsing: syntactic parsing preferences and optimality theory T3 - Zweitveröffentlichungen der Universität Potsdam : Humanwissenschaftliche Reihe - paper 255 Y1 - 1999 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-57164 ER - TY - GEN A1 - Fanselow, Gisbert A1 - Lenertová, Denisa T1 - Left peripheral focus BT - mismatches between syntax and information structure T2 - Humanwissenschaftliche Reihe N2 - In Czech, German, and many other languages, part of the semantic focus of the utterance can be moved to the left periphery of the clause. The main generalization is that only the leftmost accented part of the semantic focus can be moved. We propose that movement to the left periphery is generally triggered by an unspecific edge feature of C (Chomsky 2008) and its restrictions can be attributed to requirements of cyclic linearization, modifying the theory of cyclic linearization developed by Fox and Pesetsky (2005). The crucial assumption is that structural accent is a direct consequence of being linearized at merge, thus it is indirectly relevant for (locality restrictions on) movement. The absence of structural accent correlates with given-ness. Given elements may later receive (topic or contrastive) accents, which accounts for fronting in multiple focus/contrastive topic constructions. Without any additional assumptions, the model can account for movement of pragmatically unmarked elements to the left periphery (‘formal fronting’, Frey 2005). Crucially, the analysis makes no reference at all to concepts of information structure in the syntax, in line with the claim of Chomsky (2008) that UG specifies no direct link between syntax and information structure. T3 - Zweitveröffentlichungen der Universität Potsdam : Humanwissenschaftliche Reihe - 596 KW - Czech KW - German KW - Focus KW - Topic KW - Information structure KW - Intervention effects KW - Cyclic linearization KW - A-bar-movement KW - Prosody-syntax interface KW - Accentuation Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-428198 SN - 1866-8364 IS - 596 ER - TY - JOUR A1 - Fanselow, Gisbert T1 - Cyclic phonology-syntax-interaction BT - movement to first position in German JF - Interdisciplinary studies on information structure : ISIS ; working papers of the SFB 632 N2 - This paper investigates the nature of the attraction of XPs to clauseinitial position in German (and other languages). It argues that there are two different types of preposing. First, an XP can move when it is attracted by an EPP-like feature of Comp. Comp can, however, also attract elements that bear the formal marker of some semantic or pragmatic (information theoretic) function. This second type of movement is driven by the attraction of a formal property of the moved element. It has often been misanalysed as “operator” movement in the past. Japanese wh-questions always exhibit focus intonation (FI). Furthermore, the domain of FI exhibits a correspondence to the wh-scope. I propose that this phonology-semantics correspondence is a result of the cyclic computation of FI, which is explained under the notion of Multiple Spell-Out in the recent Minimalist framework. The proposed analysis makes two predictions: (1) embedding of an FI into another is possible; (2) (overt) movement of a wh-phrase to a phase edge position causes a mismatch between FI and wh-scope. Both predictions are tested experimentally, and shown to be borne out. KW - topicalization KW - focus movement KW - operator movement KW - A-bar-movement Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-8264 SN - 1866-4725 SN - 1614-4708 IS - 1 SP - 1 EP - 42 ER - TY - JOUR A1 - Fanselow, Gisbert T1 - The restricted access of information structure to syntax BT - a minority report N2 - This paper sketches the view that syntax does not directly interact with information structure. Therefore, syntactic data are of little help when one wants to narrow down the interpretation of terms such as “focus”, “topic”, etc. Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-19713 ER - TY - JOUR A1 - Fanselow, Gisbert T1 - Münchhausen-style head movement and the analysis of verb second JF - Linguistics in Potsdam N2 - Content: 1 Introduction 2 A restrictive theory of head movement 2.1 Preliminary Remarks 2.2 Theoretical Problems of Head Movement 2.3 Remnant Phrasal Movement 2.4 Münchhausen Style Head Movement 3 Verb Second Movement 3.1 Introductory Remarks 3.2 Problems of V/2 constructions: Does V really move to Comp? 3.3 The preverbal position 3.4 The Second Position 4 References Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-32497 SN - 1864-1857 SN - 1616-7392 VL - 22 SP - 9 EP - 49 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - THES A1 - Fang, Peng T1 - Preparation and investigation of polymer-foam films and polymer-layer systems for ferroelectrets T1 - Präparation und Untersuchung von Polymerschaumfolien und Polymerschichtsystemen für Ferroelektrete N2 - Piezoelectric materials are very useful for applications in sensors and actuators. In addition to traditional ferroelectric ceramics and ferroelectric polymers, ferroelectrets have recently become a new group of piezoelectrics. Ferroelectrets are functional polymer systems for electromechanical transduction, with elastically heterogeneous cellular structures and internal quasi-permanent dipole moments. The piezoelectricity of ferroelectrets stems from linear changes of the dipole moments in response to external mechanical or electrical stress. Over the past two decades, polypropylene (PP) foams have been investigated with the aim of ferroelectret applications, and some products are already on the market. PP-foam ferroelectrets may exhibit piezoelectric d33 coefficients of 600 pC/N and more. Their operating temperature can, however, not be much higher than 60 °C. Recently developed polyethylene-terephthalate (PET) and cyclo-olefin copolymer (COC) foam ferroelectrets show slightly better d33 thermal stabilities, but usually at the price of smaller d33 values. Therefore, the main aim of this work is the development of new thermally stable ferroelectrets with appreciable piezoelectricity. Physical foaming is a promising technique for generating polymer foams from solid films without any pollution or impurity. Supercritical carbon dioxide (CO2) or nitrogen (N2) are usually employed as foaming agents due to their good solubility in several polymers. Polyethylene propylene (PEN) is a polyester with slightly better properties than PET. A “voiding + inflation + stretching” process has been specifically developed to prepare PEN foams. Solid PEN films are saturated with supercritical CO2 at high pressure and then thermally voided at high temperatures. Controlled inflation (Gas-Diffusion Expansion or GDE) is applied in order to adjust the void dimensions. Additional biaxial stretching decreases the void heights, since it is known lens-shaped voids lead to lower elastic moduli and therefore also to stronger piezoelectricity. Both, contact and corona charging are suitable for the electric charging of PEN foams. The light emission from the dielectric-barrier discharges (DBDs) can be clearly observed. Corona charging in a gas of high dielectric strength such as sulfur hexafluoride (SF6) results in higher gas-breakdown strength in the voids and therefore increases the piezoelectricity. PEN foams can exhibit piezoelectric d33 coefficients as high as 500 pC/N. Dielectric-resonance spectra show elastic moduli c33 of 1 − 12 MPa, anti-resonance frequencies of 0.2 − 0.8 MHz, and electromechanical coupling factors of 0.016 − 0.069. As expected, it is found that PEN foams show better thermal stability than PP and PET. Samples charged at room temperature can be utilized up to 80 − 100 °C. Annealing after charging or charging at elevated temperatures may improve thermal stabilities. Samples charged at suitable elevated temperatures show working temperatures as high as 110 − 120 °C. Acoustic measurements at frequencies of 2 Hz − 20 kHz show that PEN foams can be well applied in this frequency range. Fluorinated ethylene-propylene (FEP) copolymers are fluoropolymers with very good physical, chemical and electrical properties. The charge-storage ability of solid FEP films can be significantly improved by adding boron nitride (BN) filler particles. FEP foams are prepared by means of a one-step procedure consisting of CO2 saturation and subsequent in-situ high-temperature voiding. Piezoelectric d33 coefficients up to 40 pC/N are measured on such FEP foams. Mechanical fatigue tests show that the as-prepared PEN and FEP foams are mechanically stable for long periods of time. Although polymer-foam ferroelectrets have a high application potential, their piezoelectric properties strongly depend on the cellular morphology, i.e. on size, shape, and distribution of the voids. On the other hand, controlled preparation of optimized cellular structures is still a technical challenge. Consequently, new ferroelectrets based on polymer-layer system (sandwiches) have been prepared from FEP. By sandwiching an FEP mesh between two solid FEP films and fusing the polymer system with a laser beam, a well-designed uniform macroscopic cellular structure can be formed. Dielectric resonance spectroscopy reveals piezoelectric d33 coefficients as high as 350 pC/N, elastic moduli of about 0.3 MPa, anti-resonance frequencies of about 30 kHz, and electromechanical coupling factors of about 0.05. Samples charged at elevated temperatures show better thermal stabilities than those charged at room temperature, and the higher the charging temperature, the better is the stability. After proper charging at 140 °C, the working temperatures can be as high as 110 − 120 °C. Acoustic measurements at frequencies of 200 Hz − 20 kHz indicate that the FEP layer systems are suitable for applications at least in this range. N2 - Piezoelektrische Materialien haben große technische und wirtschaftliche Bedeutung für Anwendungen in Sensoren und Aktuatoren. Neben den traditionellen ferroelektrischen Keramiken und Polymeren bilden Ferroelektrete eine neue Gruppe der Piezoelektrika. Ferroelektrete sind reversible funktionelle Polymersysteme zur Umwandlung von elektrischer in mechanische Energie und umgekehrt. Sie zeichnen sich aus durch eine elastische zelluläre Struktur mit internen quasi-permanenten Dipolen. Der Mechanismus der Piezoelektrizität in Ferroelektreten wird dominiert von der Änderung der einzelnen Dipolmomente bei Einwirkung einer äußeren mechanischen Kraft. Insbesondere zelluläres Polypropylene (PP) war in den vergangenen zwei Jahrzehnten Gegenstand intensiver Forschung und Entwicklung im Hinblick auf die grundlegenden Eigenschaften und Anwendungen von Ferroelektreten. Einige bereits erhältliche kommerzielle Produkte nutzen die in geladenem zellulären PP erreichbaren hohen piezoelektrischen d33-Koeffizienten von 600 pC/N und mehr, sind aber durch eine relativ geringe maximale Betriebstemperatur von ungefähr 60 °C eingeschränkt. Die kürzlich entwickelten Ferroelektrete aus zellulärem Polyethylenterephthalat (PET) und zellulären Cyclo-Olefin-Copolymeren (COC) zeigen eine bessere Temperaturbeständigkeit (vor allem COC), allerdings gewöhlich auf Kosten von geringeren d33-Koeffizienten. Das Ziel der vorliegenden Arbeit ist es, temperaturbeständige Ferroelektrete mit für den Markt geeigneten piezoelektrischen Eigenschaften zu entwickeln. Physikalisches Schäumen ist eine beliebte Methode, um besonders reine Polymerschäume herzustellen. Häufig werden, wegen ihrer guten Löslichkeit in vielen Polymeren, Kohlenstoffdioxid (CO2) und Stickstoff (N2) im superkritischen Zustand als Treibmittel eingesetzt. Der Polyester Polyethylennaphtalat (PEN) hat ähnliche Eigenschaften wie PET, ist jedoch temperaturbeständiger. Ein Dreistufenprozess (Schäumen, Aufblähen und Strecken) wurde entwickelt, um PEN-Schäume für hochwertige Ferroelektrete herzustellen. Ungeschäumte PEN-Folien werden mit superkritischem CO2 unter hohem Druck gesättigt und anschließend unter geringem Druck bei Temperaturen nahe der Glastemperatur geschäumt. Um die Hohlräume zu vergrößern, wird der Schaum anschließend mittels Gasdiffusionsexpansion (GDE) aufgebläht. Nach zusätzlichem biaxialen Verstrecken erhält man die optimalen linsenförmigen Zellen, welche zu einer minimalen mechanischen Steifigkeit und einem maximalen piezoelektrischen d33-Koeffizienten des Ferroelektrets führen. Sowohl Korona- als auch Kontaktaufladung werden an zellulärem PEN erfolgreich eingesetzt. Die Lichtemission der dielektrisch behinderten Entladungen (DBDs) kann klar beobachtet werden. Korona-Aufladung in Gasen mit hohen dielektrischen Durchbruchsfestigkeiten, wie z.B. Schwefelhexafluorid (SF6), ermöglicht es, das Paschen-Durchbruchsfeld in den Hohlräumen und damit die erzielbare interne Ladungsdichte zu erhöhen. Dadurch können für zelluläres PEN piezoelektrische d33-Koeffizienten bis zu 500 pC/N erzielt werden. Piezoelektrischen Resonanzmessungen der Ferroelektrete liefern Steifigkeiten c33 im Bereich von 1 – 12 MPa, Antiresonanzfrequenzen von 0.2 – 0.8 MHz und elektromechanische Kopplungsfaktoren zwischen 0.016 und 0.069. PEN-Ferroelektrete zeigen eine bessere Temperaturstabilität als solche aus PP und PET. Der Anwendungsbereich von unbehandeltem PEN reicht bis etwa 80 – 100°C, jener von getemperten oder bei 120°C geladenen Proben bis etwa 110 – 120 °C. Akustische Messungen im Frequenzbereich von 2 Hz – 20 kHz zeigen die Eignung von PEN-Ferroelektretwandlern für Luftschallanwendungen. Fluoriertes Ethylen-Propylen (FEP) ist ein Fluorpolymer mit sehr guten physikalischen, chemischen und elektrischen Eigenschaften. Die Ladungsspeichereigenschaften von ungeschäumtem FEP können durch die Beimengung von Bornitrid deutlich verbessert werden. In dieser Arbeit wird zelluläres FEP mittels eines einstufigen Prozesses, dem schon erwähnten Schäumen mit überkritischem CO2, hergestellt. Die geladenen FEP-Proben weisen d33-Koeffizienten von bis zu 40 pC/N auf. Ermüdungstests zeigen eine sehr gute mechanische Stabilität von PEN- und FEP-Ferroelektreten. Zelluläre Polymerferroelektrete haben großes Potenzial für Anwendungen, und die Suche nach geeigneten zellulären Morphologien ist eng verknüpft mit dem technischen Aufwand ihrer Herstellung. Alternativ wurden Ferroelektrete mit Sandwich-Strukturen aus FEP-Folien entwickelt. Durch Laserverschmelzen eines FEP-Foliengitters mit zwei umgebenden FEP-Folien wird eine definierte, einheitliche zelluläre Struktur gebildet. Aus dielektrischen Resonanzspektren können effektive piezoelektrische d33-Koeffizienten bis zu 350 pC/N, effektive mechanische Steifigkeiten um 0.3 MPa, Antiresonanzfrequenzen um 30 kHz und elektromechanische Kopplungsfaktoren von etwa 0.05 abgeleitet werden. Proben, welche bei erhöhter Temperatur geladen werden, zeigen höhere Ladungsstabilitäten. Nach geeigneter Aufladung bei 140 °C kann die Arbeitstemperatur bis auf 110 – 120 °C gesteigert werden. Akustische Messungen im Frequenzbereich von 2 Hz – 20 kHz zeigen die Eignung von FEP-Sandwich-Strukturen für Luftschallanwendungen. KW - Elektroaktive Materialien KW - Ferroelektret KW - Piezoelektrizität KW - Polymerschaum KW - Polymerfilm KW - Electroactive material KW - ferroelectret KW - piezoelectricity KW - polymer foam KW - polymer film Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-48412 ER - TY - INPR A1 - Fang, Daoyuan A1 - Xu, Jiang T1 - Asymptotic behavior of solutions to multidimensional nonisentropic hydrodynamic model for semiconductors N2 - In this paper, a global existence result of smooth solutions to the multidimen- sional nonisentropic hydrodynamic model for semiconductors is proved, under the assumption that the initial data is a perturbation of the stationary solutions for the thermal equilibrium state. The resulting evolutionary solutions converge to the stationary solutions in time asymptotically exponentially fast. T3 - Preprint - (2005) 02 KW - Multidimensional nonisentropic hydrodynamic model KW - semiconductors KW - asymptotic behavior KW - global solutions Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-29767 ER - TY - THES A1 - Fandrich, Artur T1 - Untersuchung des Verhaltens von thermoresponsiven Polymeren auf Elektroden in Interaktion mit biomolekularen Systemen T1 - Investigation of the behavior of thermoresponsive polymers on electrodes in interaction with biomolecular systems N2 - Diese Arbeit befasst sich mit der Herstellung und Charakterisierung von thermoresponsiven Filmen auf Goldelektroden durch Fixierung eines bereits synthetisierten thermoresponsiven Polymers. Als Basis für die Entwicklung der responsiven Grenzfläche dienten drei unterschiedliche Copolymere (Polymere I, II und III) aus der Gruppe der thermisch schaltbaren Poly(oligo(ethylenglykol)methacrylate). Die turbidimetrischen Messungen der Copolymere in Lösungen haben gezeigt, dass der Trübungspunkt vom pH-Wert, der Gegenwart von Salzen sowie von der Ionenstärke der Lösung abhängig ist. Nach der Charakterisierung der Polymere in Lösung wurden Experimente der kovalenten Kopplung der Polymere I bis III an die Oberfläche der Gold-Elektroden durchgeführt. Während bei Polymeren I und II die Ankopplung auf einer Amidverbrückung basierte, wurde bei Polymer III als alternative Methode zur Immobilisierung eine photoinduzierte Anbindung unter gleichzeitiger Vernetzung gewählt. Der Nachweis der erfolgreichen Ankopplung erfolgte bei allen Polymeren elektrochemisch mittels Cyclovoltammetrie und Impedanzspektroskopie in K3/4[Fe(CN)6]-Lösungen. Wie die Ellipsometrie-Messungen zeigten, waren die erhaltenen Polymer-Filme unterschiedlich dick. Die Ankopplung über Amidverbrückung lieferte dünne Filme (10 – 15 nm), während der photovernetzte Film deutlich dicker war (70-80 nm) und die darunter liegende Oberfläche relativ gut isolierte. Elektrochemische Temperaturexperimente an Polymer-modifizierten Oberflächen in Lösungen in Gegenwart von K3/4[Fe(CN)6] zeigten, dass auch die immobilisierten Polymere I bis III responsives Temperaturverhalten zeigen. Bei Elektroden mit den immobilisierten Polymeren I und II ist der Temperaturverlauf der Parameterwerte diskontinuierlich – ab einem kritischen Punkt (37 °C für Polymer I und 45 °C für Polymer II) wird zunächst langsame Zunahme der Peakströme wird deutlich schneller. Das Temperaturverhalten von Polymer III ist dagegen bis 50 °C kontinuierlich, der Peakstrom sinkt hier durchgehend. Weiterhin wurde mit den auf Polymeren II und III basierten Elektroden deren Anwendung als responsive Matrix für Bioerkennungsreaktionen untersucht. Es wurde die Ankopplung von kleinen Biorezeptoren, TAG-Peptiden, an Polymer II- und Polymer III-modifizierten Elektroden durchgeführt. Das hydrophile FLAG-TAG-Peptid verändert das Temperaturverhalten des Polymer II-Films unwesentlich, da es die Hydrophilie des Netzwerkes nicht beeinflusst. Weiterhin wurde der Effekt der Ankopplung der ANTI-FLAG-TAG-Antikörper an FLAG-TAG-modifizierte Polymer II-Filme untersucht. Es konnte gezeigt werden, dass die Antikörper spezifisch an FLAG-TAG-modifiziertes Polymer II binden. Es wurde keine unspezifische Anbindung von ANTI-FLAG-TAG an Polymer II beobachtet. Die Temperaturexperimente haben gezeigt, dass die thermische Restrukturierung des Polymer II-FLAG-TAG-Filmes auch nach der Antikörper-Ankopplung noch stattfindet. Der Einfluss der ANTI-FLAG-TAG-Ankopplung ist gering, da der Unterschied in der Hydrophilie zwischen Polymer II und FLAG-TAG bzw. ANTI-FLAG-TAG zu gering ist. Für die Untersuchungen mit Polymer III-Elektroden wurde neben dem hydrophilen FLAG-TAG-Peptid das deutlich hydrophobere HA-TAG-Peptid ausgewählt. Wie im Falle der Polymer II Elektrode beeinflusst das gekoppelte FLAG-TAG-Peptid das Temperaturverhalten des Polymer III-Netzwerkes nur geringfügig. Die gemessenen Stromwerte sind geringer als bei der Polymer III-Elektrode. Das Temperaturverhalten der FLAG-TAG-Elektrode ähnelt dem der reinen Polymer III-Elektrode – die Stromwerte sinken kontinuierlich bis die Temperatur von ca. 40 °C erreicht ist, bei der ein Plateau beobachtet wird. Offensichtlich verändert FLAG-TAG auch in diesem Fall nicht wesentlich die Hydrophilie des Polymer III-Netzwerkes. Das an Polymer III-Elektroden gekoppelte hydrophobe HA-TAG-Peptid beeinflusst dagegen im starken Maße den Quellzustand des Netzwerkes. Die Ströme für die HA-TAG-Elektroden sind deutlich geringer als die für die FLAG-TAG-Polymer III-Elektroden, was auf geringeren Wassergehalt und dickeren Film zurückzuführen ist. Bereits ab 30 °C erfolgt der Anstieg von Stromwerten, der bei Polymer III- bzw. bei Polymer III-FLAG-TAG-Elektroden nicht beobachtet werden kann. Das gekoppelte hydrophobe HA-TAG-Peptid verdrängt Wasser aus dem Polymer III-Netzwerk, was in der Stauchung des Films bereits bei Raumtemperatur resultiert. Dies führt dazu, dass der Film im Laufe des Temperaturanstieges kaum noch komprimiert. Die Stromwerte steigen in diesem Fall entsprechend des Anstiegs der temperaturabhängigen Diffusion des Redoxpaares. Diese Untersuchungen zeigen, dass das HA-TAG-Peptid als Ankermolekül deutlich besser für eine potentielle Verwendung der Polymer III-Filme für sensorische Zwecke geeignet ist, da es sich deutlich in der Hydrophilie von Polymer III unterscheidet. N2 - This work describes the immobilization and characterization of thermoresponsive polymer films on gold electrodes. The immobilized films were thermoresponsive copolymers (polymers I, II and III) from the group of poly(oligo(ethylene glycol)methacrylates). After the synthesis, the aqueous solutions of copolymers in presence of (buffering) salts were investigated. The turbidimetry measurements revealed that the responsive behaviour of the polymers strongly depends on the pH and the ionic strength of the solution. After the studies in the solution, experiments on the covalent immobilization of the polymers on gold electrodes were performed. The fixation strategy for the polymers I and II was based on the amide coupling. The polymer III was immobilized by irradiation with UV-light. The successful immobilization was proved by cyclic voltammetry and electrochemical impedance spectroscopy measurements in solutions containing K3/4[Fe(CN)6]. The ellipsometry measurements showed that the obtained films were of different thickness. Polymer I and II films obtained from the amide coupling were thinner (10 – 15 nm) compared to photolytically immobilized polymer III films (70-80 nm). Electrochemical temperature experiments on polymer modified electrodes in K3/4[Fe(CN)6] solutions showed that the polymer I, II and III retain the responsivity after the fixation on the electrode surface. The thermoresponsive behaviour of the thin polymer I and II films is discontinuous – after the achieving of the critical temperature point (37 °C for polymer I and 45 °C for polymer II) the increase of the peak currents changes significantly and becomes faster hinting at the restructuration process. In contrast to this the temperature behaviour of the polymer III films is continuous in the temperature range between 25 and 50 °C. The peak currents for the polymer III electrodes decrease with increasing temperature. Furthermore, the application of polymer II and polymer III surfaces as a responsive platform for bio-recognition reactions was investigated. For this purpose, the coupling of small bioreceptors (tag peptides) on polymer films was performed. It was found that the hydrophilic FLAG-TAG peptide does not significantly alter the temperature behaviour of the polymer II film because it does not affect the hydrophilicity of the network. Additionally, the effect of coupling the ANTI-FLAG-TAG antibodies to FLAG-TAG-modified polymer II films was investigated. It was shown that the antibodies specifically bind to FLAG-TAG-modified polymer II. No nonspecific binding of ANTI-FLAG-TAG to polymer II was observed. The temperature experiments have shown that the thermal restructuring of the polymer II-FLAG-TAG film still takes place after antibody coupling. The influence of ANTI-FLAG-TAG coupling is low, since the difference in the hydrophilicity between polymer II and FLAG-TAG or ANTI-FLAG-TAG is too low. In addition to the hydrophilic FLAG-TAG peptide, the significantly more hydrophobic HA-TAG peptide was selected for the investigations with polymer III electrodes. As in the case of the polymer II electrode, the coupled FLAG-TAG peptide only slightly affects the temperature behaviour of the polymer III network. The measured current values are lower than for the polymer III electrode. The temperature behaviour of the FLAG-TAG electrode resembles that of the pure polymer III electrode - the current values sink continuously until the temperature of approx. 40 ° C is reached, at which a plateau is observed. Obviously, FLAG-TAG does not significantly alter the hydrophilicity of the polymer III network even in this case. The hydrophobic HA-TAG peptide coupled to polymer III electrodes, on the other hand, strongly influences the swelling state of the network. The currents for the HA-TAG electrodes are significantly lower than those for the FLAG-TAG polymer III electrodes, which is due to lower water content and thicker film. The increase in current values occurs at temperatures as low as 30 ° C, which cannot be observed with polymer III or with polymer III FLAG TAG electrodes. The coupled hydrophobic HA-TAG peptide displaces water from the polymer III network, resulting in the compression of the film even at room temperature. As a result, the film hardly compresses during the temperature rise. The current values increase in this case according to the increase in the temperature-dependent diffusion of the redox pair. These studies show that the HA-TAG peptide as an anchoring molecule is much better suited for a potential use of the polymer III films for sensory purposes since it is clearly different in the hydrophilicity of polymer III. KW - thermoresponsiv KW - Polymer KW - Biosensor KW - Cyclovoltammetrie KW - Elektrochemie KW - thermoresponsive KW - polymer KW - biosensor KW - cyclic voltammetry KW - electrochemistry Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-396551 ER - TY - GEN A1 - Fandiño, Jorge T1 - Founded (auto)epistemic equilibrium logic satisfies epistemic splitting T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - In a recent line of research, two familiar concepts from logic programming semantics (unfounded sets and splitting) were extrapolated to the case of epistemic logic programs. The property of epistemic splitting provides a natural and modular way to understand programs without epistemic cycles but, surprisingly, was only fulfilled by Gelfond's original semantics (G91), among the many proposals in the literature. On the other hand, G91 may suffer from a kind of self-supported, unfounded derivations when epistemic cycles come into play. Recently, the absence of these derivations was also formalised as a property of epistemic semantics called foundedness. Moreover, a first semantics proved to satisfy foundedness was also proposed, the so-called Founded Autoepistemic Equilibrium Logic (FAEEL). In this paper, we prove that FAEEL also satisfies the epistemic splitting property something that, together with foundedness, was not fulfilled by any other approach up to date. To prove this result, we provide an alternative characterisation of FAEEL as a combination of G91 with a simpler logic we called Founded Epistemic Equilibrium Logic (FEEL), which is somehow an extrapolation of the stable model semantics to the modal logic S5. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1060 KW - answer set programming KW - epistemic specifications KW - epistemic logic programs Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-469685 SN - 1866-8372 IS - 1060 SP - 671 EP - 687 ER - TY - CHAP A1 - Fan, Yang A1 - Masuhara, Hidehiko A1 - Aotani, Tomoyuki A1 - Nielson, Flemming A1 - Nielson, Hanne Riis T1 - AspectKE*: Security aspects with program analysis for distributed systems N2 - Enforcing security policies to distributed systems is difficult, in particular, when a system contains untrusted components. We designed AspectKE*, a distributed AOP language based on a tuple space, to tackle this issue. In AspectKE*, aspects can enforce access control policies that depend on future behavior of running processes. One of the key language features is the predicates and functions that extract results of static program analysis, which are useful for defining security aspects that have to know about future behavior of a program. AspectKE* also provides a novel variable binding mechanism for pointcuts, so that pointcuts can uniformly specify join points based on both static and dynamic information about the program. Our implementation strategy performs fundamental static analysis at load-time, so as to retain runtime overheads minimal. We implemented a compiler for AspectKE*, and demonstrate usefulness of AspectKE* through a security aspect for a distributed chat system. KW - aspect oriented programming KW - program analysis KW - security policies KW - distributed systems KW - tuple spaces Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-41369 ER - TY - JOUR A1 - Faltermeier, Rudolf T1 - The German Banking System BT - Types of Banks and Experience in the Crisis JF - Protokollband 2013 N2 - 1. The German banking system 1.1 Three pillar structure 1.2 Business aims 2. The German economy 2.1 A land of small and medium-sized companies 2.2 Banking system and economy fit together 3. Experience in the crisis 3.1 Customer behaviour 3.2 Risk situation 3.3 Profitability 4. Conclusion Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-68657 SP - 13 EP - 25 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - THES A1 - Falter, Daniela T1 - A novel approach for large-scale flood risk assessments T1 - Ein neuartiger Ansatz für großskalige Hochwasserrisikoanalysen BT - continuous and long-term simulation of the full flood risk chain BT - kontinuierliche Langzeitsimulation der gesamten Hochwasserrisikokette N2 - In the past, floods were basically managed by flood control mechanisms. The focus was set on the reduction of flood hazard. The potential consequences were of minor interest. Nowadays river flooding is increasingly seen from the risk perspective, including possible consequences. Moreover, the large-scale picture of flood risk became increasingly important for disaster management planning, national risk developments and the (re-) insurance industry. Therefore, it is widely accepted that risk-orientated flood management ap-proaches at the basin-scale are needed. However, large-scale flood risk assessment methods for areas of several 10,000 km² are still in early stages. Traditional flood risk assessments are performed reach wise, assuming constant probabilities for the entire reach or basin. This might be helpful on a local basis, but where large-scale patterns are important this approach is of limited use. Assuming a T-year flood (e.g. 100 years) for the entire river network is unrealistic and would lead to an overestimation of flood risk at the large scale. Due to the lack of damage data, additionally, the probability of peak discharge or rainfall is usually used as proxy for damage probability to derive flood risk. With a continuous and long term simulation of the entire flood risk chain, the spatial variability of probabilities could be consider and flood risk could be directly derived from damage data in a consistent way. The objective of this study is the development and application of a full flood risk chain, appropriate for the large scale and based on long term and continuous simulation. The novel approach of ‘derived flood risk based on continuous simulations’ is introduced, where the synthetic discharge time series is used as input into flood impact models and flood risk is directly derived from the resulting synthetic damage time series. The bottleneck at this scale is the hydrodynamic simu-lation. To find suitable hydrodynamic approaches for the large-scale a benchmark study with simplified 2D hydrodynamic models was performed. A raster-based approach with inertia formulation and a relatively high resolution of 100 m in combination with a fast 1D channel routing model was chosen. To investigate the suitability of the continuous simulation of a full flood risk chain for the large scale, all model parts were integrated into a new framework, the Regional Flood Model (RFM). RFM consists of the hydrological model SWIM, a 1D hydrodynamic river network model, a 2D raster based inundation model and the flood loss model FELMOps+r. Subsequently, the model chain was applied to the Elbe catchment, one of the largest catchments in Germany. For the proof-of-concept, a continuous simulation was per-formed for the period of 1990-2003. Results were evaluated / validated as far as possible with available observed data in this period. Although each model part introduced its own uncertainties, results and runtime were generally found to be adequate for the purpose of continuous simulation at the large catchment scale. Finally, RFM was applied to a meso-scale catchment in the east of Germany to firstly perform a flood risk assessment with the novel approach of ‘derived flood risk assessment based on continuous simulations’. Therefore, RFM was driven by long term synthetic meteorological input data generated by a weather generator. Thereby, a virtual time series of climate data of 100 x 100 years was generated and served as input to RFM providing subsequent 100 x 100 years of spatially consistent river discharge series, inundation patterns and damage values. On this basis, flood risk curves and expected annual damage could be derived directly from damage data, providing a large-scale picture of flood risk. In contrast to traditional flood risk analysis, where homogenous return periods are assumed for the entire basin, the presented approach provides a coherent large-scale picture of flood risk. The spatial variability of occurrence probability is respected. Additionally, data and methods are consistent. Catchment and floodplain processes are repre-sented in a holistic way. Antecedent catchment conditions are implicitly taken into account, as well as physical processes like storage effects, flood attenuation or channel–floodplain interactions and related damage influencing effects. Finally, the simulation of a virtual period of 100 x 100 years and consequently large data set on flood loss events enabled the calculation of flood risk directly from damage distributions. Problems associated with the transfer of probabilities in rainfall or peak runoff to probabilities in damage, as often used in traditional approaches, are bypassed. RFM and the ‘derived flood risk approach based on continuous simulations’ has the potential to provide flood risk statements for national planning, re-insurance aspects or other questions where spatially consistent, large-scale assessments are required. N2 - In der Vergangenheit standen bei der Betrachtung von Hochwasser insbesondere technische Schutzmaßnahmen und die Reduzierung der Hochwassergefahr im Mittelpunkt. Inzwischen wird Hochwasser zunehmend aus der Risikoperspektive betrachtet, d.h. neben der Gefährdung werden auch die Auswirkungen berücksichtigt. In diesem Zuge wurde auch die Notwendigkeit von großräumigen Hochwasserrisikoanalysen für das Management von Naturgefahren und als Planungsgrundlage auf nationaler Ebene sowie für die Rückversicherungsindustrie erkannt. Insbesondere durch die Einführung der Europäischen Hochwasserrisikomanagement Richtlinie sind risikoorientierte Managementpläne auf Einzugsgebietsebene obligatorisch. Allerdings befinden sich großräumige Hochwasserrisikoanalysen von mehreren 10.000 km², noch in den Anfängen. Traditionell werden Hochwasserrisikoanalysen für Gewässerabschnitte durchgeführt, wobei homogene Wiederkehrintervalle für das ganze Untersuchungsgebiet angenommen werden. Für lokale Fragestellungen ist diese Vorgehensweise sinnvoll, dies gilt allerdings nicht für die großräumige Analyse des Hochwasserrisikos. Die Annahme eines beispielsweise 100-jährigen Hochwassers im gesamten Gebiet ist unrealistisch und das Hochwasserrisiko würde dabei stark überschätzt werden. Aufgrund unzureichender Schadensdaten werden bei der Berechnung des Risikos oftmals die Wahrscheinlichkeiten des Niederschlags oder der Hochwasserscheitelabflüsse als Annäherung für die Wahrscheinlichkeit des Schadens angenommen. Durch eine kontinuierliche Langzeit-Simulation der gesamten Hochwasserrisikokette könnte sowohl die räumliche Verteilung der Wiederkehrintervalle berücksichtig werden, als auch das Hochwasserrisiko direkt aus Schadenszeitreihen abgeleitet werden. Die Zielsetzung dieser Arbeit ist die Entwicklung und Anwendung einer, für großräumige Gebiete geeigneten, kontinuierlichen Hochwasserrisikomodellkette. Damit wird ein neuartiger Ansatz des ‚abgeleiteten Hochwasserrisikos basierend auf kontinuierlichen Simulationen‘ eingeführt, der das Hochwasserrisiko direkt aus den simulierten Abflusszeitreichen und den daraus resultierenden Schadenzeitreihen ableitet. Die größte Herausforderung der Hochwasserrisikokette liegt bei den sehr rechenintensiven, detaillierten hydraulischen Simulationen. Um geeignete hydraulische Modelle für die großräumige Anwendung zu identifizieren, wurde eine Benchmark-Studie mit 2D Modellen unterschiedlicher Komplexität durchgeführt. Auf dieser Grundlage wurde für die Hochwasserrisikomodellkette ein rasterbasierter Ansatz mit einer relativ hohen Auflösung von 100 m in Kombination mit einem schnellen 1D Fließgewässermodell ausgewählt. Um die Eignung einer kontinuierlichen Simulation der gesamten Hochwasserrisikokette für großräumige Anwendungen zu prüfen, wurden zunächst alle Komponenten der Modellkette im ‚Regional Flood Model‘ (RFM) zusammengeführt. RFM besteht aus dem hydrologischen Modell SWIM, 1D und 2D hydraulischen Modellen, sowie dem Schadensmodell FELMOps+r. Nachfolgend wurde die Modellkette für das Elbe-Einzugsgebiet (>60.000 km²) angewendet. Es wurde eine kontinuierliche Simulation für den Zeitraum 1990-2003 durchgeführt. Die Ergebnisse wurden nach Möglichkeit mit vorhandenen Messdaten validiert/evaluiert. Auch wenn jede Komponente zu Unsicherheiten in den Ergebnissen der Modellkette beiträgt, sind die Ergebnisse und Rechenzeiten für die Anwendung auf großskaliger Einzugsgebietsebene als adäquat anzusehen. Schließlich wurde RFM in einem mesoskaligen Einzugsgebiet (6.000 km²) im Osten von Deutschland angewendet, um erstmals eine Hochwasserrisikoanalyse mit dem neuartigen Ansatz des ‚abgeleiteten Hochwasserrisikos basierend auf kontinuierlichen Simulationen‘ durchzuführen. Als Input wurde eine 100 x 100-jährige Zeitreihe meteorologischer Daten von einem Wettergenerator erzeugt. Die somit erzeugte 100 x 100-jährige konsistente Abflusszeitreihe, Überschwemmungsmuster und Schadenswerte dienten als Basis für die nachfolgende Erstellung von Hochwasserrisikokurven und Schadenserwartungswerten für das Untersuchungsgebiet. Diese ermöglichen eine großräumige Analyse des Hochwasserrisikos. Dabei wurde die räumliche Variation der Wahrscheinlichkeiten berücksichtigt. Die verwendeten Daten und Methoden waren außerdem im gesamten Untersuchungsgebiet einheitlich. Einzugsgebietsprozesse und Prozesse der Überschwemmungsflächen werden holistisch dargestellt. Die Vorbedingungen im Einzugsgebiet sowie physikalische Prozesse, wie Rückhalteeffekte, Überlagerungseffekte im Gewässernetz oder Interaktionen zwischen Fluss und Überschwemmungsflächen, werden implizit berücksichtigt. Die Simulation von 100 x 100 Jahren und die daraus resultierende große Anzahl an Schadensdaten ermöglichen die direkte Berechnung des Hochwasserrisikos aus Schadenswahrscheinlichkeiten. Die Probleme, die durch die Übertragung von Wahrscheinlichkeiten von Niederschlag oder Scheitelabfluss auf die Wahrscheinlichkeiten im Schaden resultieren, werden umgangen. RFM und der Ansatz des ‚abgeleiteten Hochwasserrisikos basierend auf kontinuierlichen Simulationen‘ haben das Potential Hochwasserrisikoaussagen für nationale Planungen, Rückversicherungsaspekte oder andere Fragestellungen, bei denen räumlich konsistente und großräumige Analysen nötig sind, zu treffen. KW - flood risk KW - hydraulic simulation KW - flood risk analysis KW - risk model chain KW - floodplain inundation KW - Hochwasserrisikoanalysen KW - Hochwasserrisikokette KW - Überschwemmungsflächen KW - kontinuierlicher Simulationsansatz Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-90239 ER - TY - JOUR A1 - Falky, Paulina T1 - Fachübergreifender Musikunterricht - Terminologie und Konzepte JF - Perspektiven eines fachübergreifenden Musikunterrichts (Potsdamer Schriftenreihe zur Musikpädagogik ; 9) Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-570495 SN - 978-3-86956-535-4 SN - 1861-8529 SN - 2196-5080 IS - 9 SP - 27 EP - 45 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - JOUR A1 - Falkenburg, Brigitte T1 - Hermann Cohens Bedeutung für die Philosophie JF - Schriften aus dem Nachlass von Dieter Adelmann Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-477308 SN - 978-3-86956-487-6 VL - 2020 IS - 4 SP - 115 EP - 136 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - JOUR A1 - Falken, Christiane T1 - Demografischer Wandel und der Bereich Finanzen JF - KWI-Schriften N2 - I. Problemstellung/Ziel/Gliederung II. Demografie und Finanzen II. 1 Demografische Trends II. 2. Auswirkungen der demografischen Entwicklung Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-51901 SN - 1867-951X SN - 1867-9528 IS - 2 SP - 71 EP - 81 ER - TY - BOOK A1 - Falileyev, Alexandre I. ED - Tristram, Hildegard L. C. T1 - Le Vieux-Gallois N2 - Alexander I. Falilejevs Edition altwalisischer/altkymrischer Texte bietet eine erstmalige Zu-sammenstellung sämtlicher erhaltener Textzeugnisse dieser inselkeltischen Sprache. Sie datieren in die Zeit vor dem Jahr 1000 n.Chr. zurück. Jeder Text ist mit einem Glossar und einem ausführlichen linguistischen Kommentar versehen. Dieser Kommentar sowie die Einleitung liefern einen kompletten Überblick über den gegenwärtigen Wissensstand auf dem Gebiet des Altwalisischen. Der systematische Teil des Buches ordnet die linguistischen Formen (Phono-logie, Morphologie, Syntax) zu einem Abriß der altwalisischen Grammatik. Yves Le Berres Übersetzung der russischen Vorlage (Древневаллийский язык (Drevnevalliskiy yazyk), Moskau 2002) ins Französische ermöglicht der Forschung erstmalig einen Zugang zum Alt-walisischen in einer westeuropäischen Sprache. Das Altwalisische ist nicht nur für das Verständnis der anderen älteren inselkeltischen Spra-chen wichtig (Irisch, Bretonisch und Kornisch), sondern auch für die Entstehungsgeschichte des Englischen. Das Altwalisische war die erste Kontaktsprache der Sprecher des sich heraus-bildenden mittelalterlichen Englischen. N2 - This book offers, for the first time, a complete collection of the textual documents known so far in the Old Welsh language. Dr. Alexander I. Falileyev’s edition of these documents is ac-companied by a running linguistic commentary as well as a glossary. The grammatical section of the book orders all the linguistic evidence found in these texts in a systematic form. Both, the textual evidence and the linguistic analysis allow a complete picture of the present state of the research on the Old Welsh language. Dr. Falileyev’s book originally appeared in Moscow in 2002 (Древневаллийский язык (Drevnevalliskiy yazyk)). It was updated by the author in 2007 and translated by Prof. Yves Le Berre (Brest) into French, so as to make this important work accessible to scholars not versed in the Russian language. The Old Welsh language is not only important for a wider understanding of the evidence of the other medieval Insular Celtic languages (Irish, Breton and Cornish), but also for the his-tory of English, as Old Welsh was the first language that speakers of nascent English were in contact with. KW - Altwalisisch / Altkymrisch KW - inselkeltische Sprachen KW - Kambristik KW - Grammatik KW - Phonologie KW - Old Welsh / Old Cymraeg KW - Insular Celtic languages KW - Welsh Studies KW - grammar book KW - phonology Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-19760 SN - 978-3-940793-44-7 PB - Universitätsverlag Potsdam CY - Potsdam ER -