TY - JOUR A1 - Abbas, Ioana M. A1 - Vranic, Marija A1 - Hoffmann, Holger A1 - El-Khatib, Ahmed H. A1 - Montes-Bayón, María A1 - Möller, Heiko Michael A1 - Weller, Michael G. T1 - Investigations of the Copper Peptide Hepcidin-25 by LC-MS/MS and NMR⁺ JF - International Journal of Molecular Sciences N2 - Hepcidin-25 was identified as themain iron regulator in the human body, and it by binds to the sole iron-exporter ferroportin. Studies showed that the N-terminus of hepcidin is responsible for this interaction, the same N-terminus that encompasses a small copper(II) binding site known as the ATCUN (amino-terminal Cu(II)- and Ni(II)-binding) motif. Interestingly, this copper-binding property is largely ignored in most papers dealing with hepcidin-25. In this context, detailed investigations of the complex formed between hepcidin-25 and copper could reveal insight into its biological role. The present work focuses on metal-bound hepcidin-25 that can be considered the biologically active form. The first part is devoted to the reversed-phase chromatographic separation of copper-bound and copper-free hepcidin-25 achieved by applying basic mobile phases containing 0.1% ammonia. Further, mass spectrometry (tandemmass spectrometry (MS/MS), high-resolutionmass spectrometry (HRMS)) and nuclear magnetic resonance (NMR) spectroscopy were employed to characterize the copper-peptide. Lastly, a three-dimensional (3D)model of hepcidin-25with bound copper(II) is presented. The identification of metal complexes and potential isoforms and isomers, from which the latter usually are left undetected by mass spectrometry, led to the conclusion that complementary analytical methods are needed to characterize a peptide calibrant or referencematerial comprehensively. Quantitative nuclear magnetic resonance (qNMR), inductively-coupled plasma mass spectrometry (ICP-MS), ion-mobility spectrometry (IMS) and chiral amino acid analysis (AAA) should be considered among others. KW - hepcidin-25 KW - copper KW - nickel KW - copper complex KW - ATCUN motif KW - metal complex KW - MS KW - NMR structure KW - metal peptide KW - metalloprotein KW - metallopeptide KW - isomerization KW - racemization KW - purity KW - reference material Y1 - 2018 U6 - https://doi.org/10.3390/ijms19082271 SN - 1422-0067 SN - 1661-6596 VL - 19 IS - 8 PB - Molecular Diversity Preservation International CY - Basel ER - TY - GEN A1 - Abbas, Ioana M. A1 - Vranic, Marija A1 - Hoffmann, Holger A1 - El-Khatib, Ahmed H. A1 - Montes-Bayón, María A1 - Möller, Heiko Michael A1 - Weller, Michael G. T1 - Investigations of the Copper Peptide Hepcidin-25 by LC-MS/MS and NMR⁺ T2 - Postprints der Universität Potsdam Mathematisch-Naturwissenschaftliche Reihe N2 - Hepcidin-25 was identified as themain iron regulator in the human body, and it by binds to the sole iron-exporter ferroportin. Studies showed that the N-terminus of hepcidin is responsible for this interaction, the same N-terminus that encompasses a small copper(II) binding site known as the ATCUN (amino-terminal Cu(II)- and Ni(II)-binding) motif. Interestingly, this copper-binding property is largely ignored in most papers dealing with hepcidin-25. In this context, detailed investigations of the complex formed between hepcidin-25 and copper could reveal insight into its biological role. The present work focuses on metal-bound hepcidin-25 that can be considered the biologically active form. The first part is devoted to the reversed-phase chromatographic separation of copper-bound and copper-free hepcidin-25 achieved by applying basic mobile phases containing 0.1% ammonia. Further, mass spectrometry (tandemmass spectrometry (MS/MS), high-resolutionmass spectrometry (HRMS)) and nuclear magnetic resonance (NMR) spectroscopy were employed to characterize the copper-peptide. Lastly, a three-dimensional (3D)model of hepcidin-25with bound copper(II) is presented. The identification of metal complexes and potential isoforms and isomers, from which the latter usually are left undetected by mass spectrometry, led to the conclusion that complementary analytical methods are needed to characterize a peptide calibrant or referencematerial comprehensively. Quantitative nuclear magnetic resonance (qNMR), inductively-coupled plasma mass spectrometry (ICP-MS), ion-mobility spectrometry (IMS) and chiral amino acid analysis (AAA) should be considered among others. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 701 KW - hepcidin-25 KW - copper KW - nickel KW - copper complex KW - ATCUN motif KW - metal complex KW - MS KW - NMR structure KW - metal peptide KW - metalloprotein KW - metallopeptide KW - isomerization KW - racemization KW - purity KW - reference material Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-427926 SN - 1866-8372 IS - 701 ER - TY - THES A1 - Brinkmann, Pia T1 - Laserinduzierte Breakdownspektroskopie zur qualitativen und quantitativen Bestimmung von Elementgehalten in geologischen Proben mittels multivariater Analysemethoden am Beispiel von Kupfer und ausgewählten Seltenen Erden N2 - Ein schonender Umgang mit den Ressourcen und der Umwelt ist wesentlicher Bestandteil des modernen Bergbaus sowie der zukünftigen Versorgung unserer Gesellschaft mit essentiellen Rohstoffen. Die vorliegende Arbeit beschäftigt sich mit der Entwicklung analytischer Strategien, die durch eine exakte und schnelle Vor-Ort-Analyse den technisch-praktischen Anforderungen des Bergbauprozesses gerecht werden und somit zu einer gezielten und nachhaltigen Nutzung von Rohstofflagerstätten beitragen. Die Analysen basieren auf den spektroskopischen Daten, die mittels der laserinduzierten Breakdownspektroskopie (LIBS) erhalten und mittels multivariater Datenanalyse ausgewertet werden. Die LIB-Spektroskopie ist eine vielversprechende Technik für diese Aufgabe. Ihre Attraktivität machen insbesondere die Möglichkeiten aus, Feldproben vor Ort ohne Probennahme oder ‑vorbereitung messen zu können, aber auch die Detektierbarkeit sämtlicher Elemente des Periodensystems und die Unabhängigkeit vom Aggregatzustand. In Kombination mit multivariater Datenanalyse kann eine schnelle Datenverarbeitung erfolgen, die Aussagen zur qualitativen Elementzusammensetzung der untersuchten Proben erlaubt. Mit dem Ziel die Verteilung der Elementgehalte in einer Lagerstätte zu ermitteln, werden in dieser Arbeit Kalibrierungs- und Quantifizierungsstrategien evaluiert. Für die Charakterisierung von Matrixeffekten und zur Klassifizierung von Mineralen werden explorative Datenanalysemethoden angewendet. Die spektroskopischen Untersuchungen erfolgen an Böden und Gesteinen sowie an Mineralen, die Kupfer oder Seltene Erdelemente beinhalten und aus verschiedenen Lagerstätten bzw. von unterschiedlichen Agrarflächen stammen. Für die Entwicklung einer Kalibrierungsstrategie wurden sowohl synthetische als auch Feldproben von zwei verschiedenen Agrarflächen mittels LIBS analysiert. Anhand der Beispielanalyten Calcium, Eisen und Magnesium erfolgte die auf uni- und multivariaten Methoden beruhende Evaluierung verschiedener Kalibrierungsmethoden. Grundlagen der Quantifizierungsstrategien sind die multivariaten Analysemethoden der partiellen Regression der kleinsten Quadrate (PLSR, von engl.: partial least squares regression) und der Intervall PLSR (iPLSR, von engl.: interval PLSR), die das gesamte detektierte Spektrum oder Teilspektren in der Analyse berücksichtigen. Der Untersuchung liegen synthetische sowie Feldproben von Kupfermineralen zugrunde als auch solche die Seltene Erdelemente beinhalten. Die Proben stammen aus verschiedenen Lagerstätten und weisen unterschiedliche Begleitmatrices auf. Mittels der explorativen Datenanalyse erfolgte die Charakterisierung dieser Begleitmatrices. Die dafür angewendete Hauptkomponentenanalyse gruppiert Daten anhand von Unterschieden und Regelmäßigkeiten. Dies erlaubt Aussagen über Gemeinsamkeiten und Unterschiede der untersuchten Proben im Bezug auf ihre Herkunft, chemische Zusammensetzung oder lokal bedingte Ausprägungen. Abschließend erfolgte die Klassifizierung kupferhaltiger Minerale auf Basis der nicht-negativen Tensorfaktorisierung. Diese Methode wurde mit dem Ziel verwendet, unbekannte Proben aufgrund ihrer Eigenschaften in Klassen einzuteilen. Die Verknüpfung von LIBS und multivariater Datenanalyse bietet die Möglichkeit durch eine Analyse vor Ort auf eine Probennahme und die entsprechende Laboranalytik weitestgehend zu verzichten und kann somit zum Umweltschutz sowie einer Schonung der natürlichen Ressourcen bei der Prospektion und Exploration von neuen Erzgängen und Lagerstätten beitragen. Die Verteilung von Elementgehalten der untersuchten Gebiete ermöglicht zudem einen gezielten Abbau und damit eine effiziente Nutzung der mineralischen Rohstoffe. N2 - The sustainable use of resources and the environment is an important part of modern mining and the supply of our society with essential raw materials in the future. The present work focuses on the development of analytical strategies that address the technical-practical requirements of the mining process through accurate and rapid on-site analysis, thus contributing to the targeted and sustainable use of raw material deposits. The analyses are based on spectroscopic data obtained by laser-induced breakdown spectroscopy (LIBS) and evaluated by multivariate data analysis. LIB spectroscopy is a promising technique for this task. Its advantages are in particular the possibility to measure field samples on site without sample collection or preparation, but also the detectability of all elements of the periodic table and the independence of the state of matter. In combination with multivariate data analysis, rapid data processing can be performed, allowing statements to be made on the qualitative elemental composition of the samples investigated. With the goal of determining the distribution of elemental contents in a deposit, calibration and quantification strategies are evaluated in this work. Exploratory data analysis methods are used to characterize matrix effects and to classify minerals. Spectroscopic studies are performed on soils and rocks as well as on minerals containing copper or rare earth elements originating from different deposits or from different agricultural sites. To develop a calibration strategy, both synthetic and field samples from two different agricultural sites were analyzed using LIBS. Using calcium, iron and magnesium as example analytes, the evaluation of different calibration methods based on univariate and multivariate methods was performed. Basics of the quantification strategies are the multivariate analysis methods of partial least squares regression (PLSR) and interval PLSR (iPLSR), which consider the whole detected spectrum or partial spectra in the analysis. The investigation is based on synthetic and field samples of copper minerals as well as those containing rare earth elements. The samples are from different deposits and have varying accompanying matrices. Exploratory data analysis was used to characterize these accompanying matrices. The principal component analysis used for this purpose groups data on the basis of differences and regularities. This allows conclusions to be drawn about similarities and differences between the samples examined in terms of their origin, chemical composition or locally determined characteristics. Finally, the classification of copper-bearing minerals was based on non-negative tensor factorization. This method was used with the aim of classifying unknown samples based on their properties. The combination method of LIBS and multivariate data analysis offers the possibility to avoid sampling and the corresponding laboratory analysis as far as possible by an on-site analysis and can thus contribute to environmental protection as well as to a conservation of natural resources during the prospection and exploration of new ore veins and deposits. The distribution of element contents of the investigated areas also enables a precise mining and thus an efficient utilization of the mineral raw materials. KW - LIBS KW - laserinduzierte Breakdownspektroskopie KW - Seltene Erdelemente KW - Kupfer KW - PCA KW - PLSR KW - NTF KW - copper KW - LIBS KW - NTF KW - PCA KW - PLSR KW - rare earth elements KW - laser induced breakdown spectroscopy Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-572128 ER - TY - JOUR A1 - Hossain, Mohammad Delwar A1 - Chakraborty, Chanchal A1 - Rana, Utpal A1 - Mondal, Sanjoy A1 - Holdt, Hans-Jürgen A1 - Higuchi, Masayoshi T1 - Green-to-black electrochromic copper(I)-based metallo-supramolecular polymer with a perpendicularly twisted structure JF - ACS applied polymer materials N2 - A Cu(I)-based metallo-supramolecular polymer with a perpendicularly twisted structure was synthesized by a 1:1 complexation of tetrakis(acetonitrile)copper(I) triflate with the pi-conjugated dibenzoeilatin ligand. Stepwise complexation behavior of Cu(I) with the ligand was revealed by titrimetric ultraviolet- visible (UV-vis) spectroscopic analysis. Formation of a high-molecular-weight polymer (M-w = 1.21 x 10(5) Da) was confirmed by a size-exclusion chromatography-viscometry-right-angle laser light scattering study. A bundle structure of the polymer chains was observed by scanning electron microscopy. A cyclic voltammogram of the polymer film showed reversible redox waves at a negative potential. A device consisting of indium tin oxide (ITO) glass coated with a film of the polymer exhibited reversible green-to-black electrochromism upon alternate application of -3 and +1 V. KW - electrochromism KW - metallo-supramolecular polymers KW - stepwise complexation KW - metal-to-ligand charge transfer KW - copper KW - dibenzoeilatin Y1 - 2020 U6 - https://doi.org/10.1021/acsapm.0c00559 SN - 2637-6105 VL - 2 IS - 11 SP - 4449 EP - 4454 PB - American Chemical Society CY - Washington, DC ER - TY - JOUR A1 - Kozlevcar, Bojan A1 - Golobic, Amalija A1 - Strauch, Peter T1 - Dynamic pseudo Jahn-Teller distortion in a compressed octahedral CuO6 complex JF - Polyhedron : the international journal of inorganic and organometallic chemistry N2 - The crystal structure of cis-[Cu(C8H7O3)(2)(H2O)(2)] (115 K data) reveals bidentate vanillinate ions coordinated via methoxy and deprotonated hydroxy oxygen atoms and water molecules in a distorted octahedral CuO6 chromophore. A cis orientation of the ligands enables two non-identical O(methoxy)-Cu-O(water) coordination axes (2.354(l) + 2.163(1); 2.151(1) + 2.020(1) angstrom), and the third shortest O(hydroxy)-Cu-O(hydroxy) axis (1.919(1) + 1.914(1) angstrom). This 115 K coordination sphere differs importantly to the one obtained from the 293 K data of the same compound, where two long 0(methoxy)-Cu-O(water) axes are of the same length, and only minor changes at the short 0(hydroxy)-Cu-O(hydroxy) axis are noticed. An axial symmetry of the complex with an inverse g(1.2)(g(perpendicular to)) > g(3)(g(parallel to)) pattern is observed in the temperature range from 298 to 180 K. A further decrease of temperature reveals gradual changes from axial to rhombic symmetry (g(1) > g(2) > g(3)) that is reversible. A mean-square displacement amplitude (MDSA) analysis reveals a disorder in the Cu-O(methoxy) bonds, but not in the other metal-ligand Cu-O(hydroxy) and Cu-O(water) bonds at 293 and 115 K. The disorder is significantly weaker in the 115 K structure. The MSDA analysis and the structural-EPR agreement show vibrational disorder in two coordination axes, due to the cis conformation of the complex with two 0(methoxy)-Cu-O(water) axes. KW - copper KW - vanillin KW - Jahn-Teller distortion KW - MSDA KW - cis KW - EPR Y1 - 2006 U6 - https://doi.org/10.1016/j.poly.2006.04.009 SN - 0277-5387 VL - 25 IS - 15 SP - 2824 EP - 2828 PB - Elsevier CY - Oxford ER - TY - JOUR A1 - Schwarze, Thomas A1 - Kelling, Alexandra A1 - Müller, Holger A1 - Trautmann, Michael A1 - Klamroth, Tillmann A1 - Baumann, Otto A1 - Strauch, Peter A1 - Holdt, Hans-Jürgen T1 - N-2-Pyridinylmethyl-N '-arylmethyl-diaminomaleonitriles: New Highly Selective Chromogenic Chemodosimeters for Copper(II) JF - Chemistry - a European journal KW - amides KW - chemodosimeter KW - colorimetric detection KW - copper KW - sensors KW - UV KW - Vis spectroscopy Y1 - 2012 U6 - https://doi.org/10.1002/chem.201201731 SN - 0947-6539 VL - 18 IS - 34 SP - 10506 EP - 10510 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Schwarze, Thomas A1 - Sperlich, Eric A1 - Müller, Thomas A1 - Kelling, Alexandra A1 - Holdt, Hans-Jürgen T1 - Synthesis efforts of acyclic bis(monoalkylamino)maleonitriles and macrocyclic bis(dialkylamino)maleonitriles as fluorescent probes for cations and a new colorimetric copper(II) chemodosimeter JF - Helvetica chimica acta N2 - In this article, we report on the synthesis of acyclic bis(monoalkylamino)maleonitriles and on the intended synthesis of macrocyclic bis(dialkylamino)maleonitriles to get fluorescent probes for cations. During our efforts to synthesize macrocyclic bis(dialkylamino)maleonitriles, we were only able to isolate macrocyclic bis(dialkylamino)-fumaronitriles. The synthesis of macrocyclic bis(dialkylamino)maleonitriles is challenging, due to the fact that bis-(dialkylamino)fumaronitriles are thermodynamically more stable than the corresponding bis(dialkylamino)-maleonitriles. Further, it turned out that the acyclic bis(monoalkylamino)maleonitriles and macrocyclic bis-(dialkylamino)fumaronitriles are no suitable tools to detect cations by a strong fluorescence enhancement. Further, only the bis(monoalkylamino)maleonitriles, which are bearing a 2-pyridyl unit as an additional complexing unit, are able to selectively recognize copper(II) by a color change from yellow to red. KW - copper KW - fumaronitrile KW - ligands KW - macrocycles KW - maleonitrile Y1 - 2021 U6 - https://doi.org/10.1002/hlca.202100028 SN - 1522-2675 VL - 104 IS - 6 SP - e2100028 PB - Wiley-VCH CY - Weinheim ER -