TY - JOUR A1 - Xu, Pengbo A1 - Zhou, Tian A1 - Metzler, Ralf A1 - Deng, Weihua T1 - Stochastic harmonic trapping of a Lévy walk BT - transport and first-passage dynamics under soft resetting strategies JF - New journal of physics : the open-access journal for physics / Deutsche Physikalische Gesellschaft ; IOP, Institute of Physics N2 - We introduce and study a Lévy walk (LW) model of particle spreading with a finite propagation speed combined with soft resets, stochastically occurring periods in which an harmonic external potential is switched on and forces the particle towards a specific position. Soft resets avoid instantaneous relocation of particles that in certain physical settings may be considered unphysical. Moreover, soft resets do not have a specific resetting point but lead the particle towards a resetting point by a restoring Hookean force. Depending on the exact choice for the LW waiting time density and the probability density of the periods when the harmonic potential is switched on, we demonstrate a rich emerging response behaviour including ballistic motion and superdiffusion. When the confinement periods of the soft-reset events are dominant, we observe a particle localisation with an associated non-equilibrium steady state. In this case the stationary particle probability density function turns out to acquire multimodal states. Our derivations are based on Markov chain ideas and LWs with multiple internal states, an approach that may be useful and flexible for the investigation of other generalised random walks with soft and hard resets. The spreading efficiency of soft-rest LWs is characterised by the first-passage time statistic. KW - diffusion KW - anomalous diffusion KW - stochastic resetting KW - Levy walks Y1 - 2022 U6 - https://doi.org/10.1088/1367-2630/ac5282 SN - 1367-2630 VL - 24 IS - 3 SP - 1 EP - 28 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - JOUR A1 - Poltz, Nadine A1 - Quandte, Sabine A1 - Kohn, Juliane A1 - Kucian, Karin A1 - Wyschkon, Anne A1 - von Aster, Michael A1 - Esser, Günter T1 - Does It Count? Pre-School Children’s Spontaneous Focusing on Numerosity and Their Development of Arithmetical Skills at School JF - Brain Sciences N2 - Background: Children’s spontaneous focusing on numerosity (SFON) is related to numerical skills. This study aimed to examine (1) the developmental trajectory of SFON and (2) the interrelations between SFON and early numerical skills at pre-school as well as their influence on arithmetical skills at school. Method: Overall, 1868 German pre-school children were repeatedly assessed until second grade. Nonverbal intelligence, visual attention, visuospatial working memory, SFON and numerical skills were assessed at age five (M = 63 months, Time 1) and age six (M = 72 months, Time 2), and arithmetic was assessed at second grade (M = 95 months, Time 3). Results: SFON increased significantly during pre-school. Path analyses revealed interrelations between SFON and several numerical skills, except number knowledge. Magnitude estimation and basic calculation skills (Time 1 and Time 2), and to a small degree number knowledge (Time 2), contributed directly to arithmetic in second grade. The connection between SFON and arithmetic was fully mediated by magnitude estimation and calculation skills at pre-school. Conclusion: Our results indicate that SFON first and foremost influences deeper understanding of numerical concepts at pre-school and—in contrast to previous findings –affects only indirectly children’s arithmetical development at school. KW - SFON KW - school mathematics KW - mathematical precursor KW - counting KW - number knowledge KW - magnitude estimation KW - transformation KW - pre-school KW - longitudinal KW - development Y1 - 2022 U6 - https://doi.org/10.3390/brainsci12030313 SN - 2076-3425 VL - 12 SP - 1 EP - 18 PB - MDPI CY - Basel, Schweiz ET - 3 ER - TY - JOUR A1 - Stuchtey, Fidelis Christin A1 - Block, Andrea A1 - Osei, Francis A1 - Wippert, Pia-Maria T1 - Lipid Biomarkers in Depression: Does Antidepressant Therapy Have an Impact? JF - Healthcare : open access journal N2 - Studies have revealed mixed results on how antidepressant drugs affect lipid profiles of patients with major depression disorder (MDD). Even less is known about how patients respond to a switch of antidepressant medication with respect to their metabolic profile. For this, effects of a switch in antidepressants medication on lipid markers were studied in MDD patients. 15 participants (females = 86.67%; males = 13.33%; age: 49.45 ± 7.45 years) with MDD and a prescribed switch in their antidepressant medication were recruited at a psychosomatic rehabilitation clinic. Participants were characterized (with questionnaires and blood samples) at admission to the rehabilitation clinic (baseline, T0) and followed up with a blood sample two weeks (T1) later. HDL, LDL, total cholesterol, and triglycerides were determined (T0), and their change analyzed (Wilcoxon test) at follow up (T1). Decrements in HDL (p = 0.041), LDL (p < 0.001), and total cholesterol (p < 0.001) were observed two weeks after a switch in antidepressant medication. Triglycerides showed no difference (p = 0.699). Overall, LDL, HDL, and total cholesterol are affected by a change in antidepressant drugs in patients with MDD. These observations are of clinical relevance for medical practitioners in the planning and management of treatment strategies for MDD patients. KW - major depressive disorder KW - antidepressants KW - high density lipoprotein cholesterol KW - HDL KW - low density lipoprotein cholesterol KW - LDL KW - cholesterol KW - triglycerides KW - lipids Y1 - 2022 U6 - https://doi.org/10.3390/healthcare10020333 SN - 2227-9032 VL - 10 SP - 1 EP - 11 PB - MDPI CY - Basel, Schweiz ET - 2 ER - TY - JOUR A1 - Sagu Tchewonpi, Sorel A1 - Huschek, Gerd A1 - Waldbach Braga, Tess A1 - Rackiewicz, Michal A1 - Homann, Thomas A1 - Rawel, Harshadrai Manilal T1 - Design of Experiment (DoE) for Optimization of HPLC Conditions for the Simultaneous Fractionation of Seven α-Amylase/Trypsin Inhibitors from Wheat (Triticum aestivum L.) JF - Processes : open access journal N2 - Wheat alpha-amylase/trypsin inhibitors remain a subject of interest considering the latest findings showing their implication in wheat-related non-celiac sensitivity (NCWS). Understanding their functions in such a disorder is still unclear and for further study, the need for pure ATI molecules is one of the limiting problems. In this work, a simplified approach based on the successive fractionation of ATI extracts by reverse phase and ion exchange chromatography was developed. ATIs were first extracted from wheat flour using a combination of Tris buffer and chloroform/methanol methods. The separation of the extracts on a C18 column generated two main fractions of interest F1 and F2. The response surface methodology with the Doehlert design allowed optimizing the operating parameters of the strong anion exchange chromatography. Finally, the seven major wheat ATIs namely P01083, P17314, P16850, P01085, P16851, P16159, and P83207 were recovered with purity levels (according to the targeted LC-MS/MS analysis) of 98.2 ± 0.7; 98.1 ± 0.8; 97.9 ± 0.5; 95.1 ± 0.8; 98.3 ± 0.4; 96.9 ± 0.5, and 96.2 ± 0.4%, respectively. MALDI-TOF-MS analysis revealed single peaks in each of the pure fractions and the mass analysis yielded deviations of 0.4, 1.9, 0.1, 0.2, 0.2, 0.9, and 0.1% between the theoretical and the determined masses of P01083, P17314, P16850, P01085, P16851, P16159, and P83207, respectively. Overall, the study allowed establishing an efficient purification process of the most important wheat ATIs. This paves the way for further in-depth investigation of the ATIs to gain more knowledge related to their involvement in NCWS disease and to allow the absolute quantification in wheat samples. KW - wheat KW - α-amylase/trypsin inhibitors KW - fractionation KW - purification KW - reversed-phase chromatography KW - ion-exchange chromatography KW - design of experiment KW - LC–MS/MS KW - MALDI-TOF-MS Y1 - 2022 U6 - https://doi.org/10.3390/pr10020259 SN - 2227-9717 VL - 10 SP - 1 EP - 18 PB - MDPI CY - Basel, Schweiz ET - 2 ER - TY - JOUR A1 - Herold, Fabian A1 - Labott, Berit K. A1 - Grässler, Bernhard A1 - Halfpaap, Nicole A1 - Langhans, Corinna A1 - Müller, Patrick A1 - Ammar, Achraf A1 - Dordevic, Milos A1 - Hökelmann, Anita A1 - Müller, Notger Germar T1 - A Link between Handgrip Strength and Executive Functioning: A Cross-Sectional Study in Older Adults with Mild Cognitive Impairment and Healthy Controls JF - Healthcare : open access journal N2 - Older adults with amnestic mild cognitive impairment (aMCI) who in addition to their memory deficits also suffer from frontal-executive dysfunctions have a higher risk of developing dementia later in their lives than older adults with aMCI without executive deficits and older adults with non-amnestic MCI (naMCI). Handgrip strength (HGS) is also correlated with the risk of cognitive decline in the elderly. Hence, the current study aimed to investigate the associations between HGS and executive functioning in individuals with aMCI, naMCI and healthy controls. Older, right-handed adults with amnestic MCI (aMCI), non-amnestic MCI (naMCI), and healthy controls (HC) conducted a handgrip strength measurement via a handheld dynamometer. Executive functions were assessed with the Trail Making Test (TMT A&B). Normalized handgrip strength (nHGS, normalized to Body Mass Index (BMI)) was calculated and its associations with executive functions (operationalized through z-scores of TMT B/A ratio) were investigated through partial correlation analyses (i.e., accounting for age, sex, and severity of depressive symptoms). A positive and low-to-moderate correlation between right nHGS (rp (22) = 0.364; p = 0.063) and left nHGS (rp (22) = 0.420; p = 0.037) and executive functioning in older adults with aMCI but not in naMCI or HC was observed. Our results suggest that higher levels of nHGS are linked to better executive functioning in aMCI but not naMCI and HC. This relationship is perhaps driven by alterations in the integrity of the hippocampal-prefrontal network occurring in older adults with aMCI. Further research is needed to provide empirical evidence for this assumption. KW - MCI KW - hippocampal-prefrontal network KW - handgrip strength KW - exercise cognition KW - aging KW - brain health Y1 - 2022 U6 - https://doi.org/10.3390/healthcare10020230 SN - 2227-9032 VL - 10 SP - 1 EP - 14 PB - MDPI CY - Basel, Schweiz ET - 2 ER - TY - THES A1 - Michalik-Onichimowska, Aleksandra T1 - Real-time monitoring of (photo)chemical reactions in micro flow reactors and levitated droplets by IR-MALDI ion mobility and mass spectrometry N2 - Eine nachhaltigere chemische Industrie erfordert eine Minimierung der Lösungsmittel und Chemikalien. Daher werden Optimierung und Entwicklung chemischer Prozesse vor einer Produktion in großem Maßstab in kleinen Chargen durchgeführt. Der entscheidende Schritt bei diesem Ansatz ist die Skalierbarkeit von kleinen Reaktionssystemen auf große, kosteneffiziente Reaktoren. Die Vergrößerung des Volumens des Reaktionsmediums geht immer mit der Vergrößerung der Oberfläche einher, die mit dem begrenzenden Gefäß in Kontakt steht. Da das Volumen kubisch, während die Oberfläche quadratisch mit zunehmendem Radius skaliert, nimmt ihr Verhältnis nicht linear zu. Viele an der Grenzfläche zwischen Oberfläche und Flüssigkeit auftretende Phänomene können die Reaktionsgeschwindigkeiten und Ausbeuten beeinflussen, was zu falschen Prognosen aufgrund der kleinskaligen Optimierung führt. Die Anwendung von schwebenden Tropfen als behälterlose Reaktionsgefäße bietet eine vielversprechende Möglichkeit, die oben genannten Probleme zu vermeiden. In der vorgestellten Arbeit wurde eine effiziente Kopplung von akustisch schwebenden Tropfen und IM Spektrometer für die Echtzeitüberwachung chemischer Reaktionen entwickelt, bei denen akustisch schwebende Tropfen als Reaktionsgefäße fungieren. Das Design des Systems umfasst die berührungslose Probenahme und Ionisierung, die durch Laserdesorption und -ionisation bei 2,94 µm realisiert wird. Der Umfang der Arbeit umfasst grundlegende Studien zum Verständnis der Laserbestrahlung von Tropfen im akustischen Feld. Das Verständnis dieses Phänomens ist entscheidend, um den Effekt der zeitlichen und räumlichen Auflösung der erzeugten Ionenwolke zu verstehen, die die Auflösung des Systems beeinflusst. Der Aufbau umfasst eine akustische Falle, Laserbestrahlung und elektrostatische Linsen, die bei hoher Spannung unter Umgebungsdruck arbeiten. Ein effektiver Ionentransfer im Grenzflächenbereich zwischen dem schwebenden Tropfen und dem IMS muss daher elektrostatische und akustische Felder vollständig berücksichtigen. Für die Probenahme und Ionisation wurden zwei unterschiedliche Laserpulslängen untersucht, nämlich im ns- und µs-Bereich. Die Bestrahlung über µs-Laserpulse bietet gegenüber ns-Pulse mehrere Vorteile: i) das Tropfenvolumen wird nicht stark beeinflusst, was es ermöglichet, nur ein kleines Volumen des Tropfens abzutasten; ii) die geringere Fluenz führt zu weniger ausgeprägten Schwingungen des im akustischen Feld eingeschlossenen Tropfens und der Tropfen wird nicht aus dem akustischen Feld rückgeschlagen, was zum Verlust der Probe führen würde; iii) die milde Laserbestrahlung führt zu einer besseren räumlichen und zeitlichen Begrenzung der Ionenwolken, was zu einer besseren Auflösung der detektierten Ionenpakete führt. Schließlich ermöglicht dieses Wissen die Anwendung der Ionenoptik, die erforderlich ist, um den Ionenfluss zwischen dem im akustischen Feld suspendierten Tropfen und dem IM Spektrometer zu induzieren. Die Ionenoptik aus 2 elektrostatischen Linsen in der Nähe des Tropfens ermöglicht es, die Ionenwolke effektiv zu fokussieren und direkt zum IM Spektrometer-Eingang zu führen. Diese neuartige Kopplung hat sich beim Nachweis einiger basischer Moleküle als erfolgreich erwiesen. Um die Anwendbarkeit des Systems zu belegen, wurde die Reaktion zwischen N-Boc Cysteine Methylester und Allylalkohol in einem Chargenreaktor durchgeführt und online überwacht. Für eine Kalibrierung wurde der Reaktionsfortschritt parallel mittels 1H-NMR verfolgt. Der beobachtete Reaktionsumsatz von mehr als 50% innerhalb der ersten 20 Minuten demonstrierte die Eignung der Reaktion, um die Einsatzpotentiale des entwickelten Systems zu bewerten. N2 - One aspect of achieving a more sustainable chemical industry is the minimization of the usage of solvents and chemicals. Thus, optimization and development of chemical processes for large-scale production is favourably performed in small batches. The critical step in this approach is upscaling the batches from the small reaction systems to the large reactors mandatory for cost efficient production in an industrial environment. Scaling up the bulk volume always goes along with increasing the surface where the reaction medium is in contact with the confining vessel. Since volume scales proportional with the cubic dimension while the surface scales quadratic, their ratio is size-dependent. The influence of reaction vessel walls can change the reaction performance. A number of phenomena occurring at the surface-liquid interface can affect reaction rates and yields, resulting in possible difficulties in predicting and extrapolating from small size production scale to large industrial processes. The application of levitated droplets as a containerless reaction vessels provides a promising possibility to avoid the above-mentioned issues. In the presented work, an efficient coupling of acoustically levitated droplets to an ion mobility (IM) spectrometer, operating at ambient conditions, was designed for real-time monitoring of chemical reactions. The design of the system comprises noncontact sampling and ionization of the droplet realised by laser desorption/ionization at 2,94 µm. The scope of the work includes fundamental studies covering understanding of laser irradiation of droplets enclosed in an acoustical field. Understanding of this phenomenon is crucial to comprehending the effects of temporal and spatial resolution of the generated ion plume that influence the resolution of the system. The set-up includes an acoustic trap, laser irradiation and ion manipulation electrostatic lenses operating at high voltage at ambient pressure. The complexity of the design needs to fully be considered for an effective ion transfer at the interface region between the levitated droplet and IM spectrometer. For sampling and ionization, two distinct laser pulse lengths were evaluated, ns and µs. Irradiation via µs laser pulses provides several advantages: i) the droplet volume is not extensively impinged, as in case of ns laser pulses, allowing the sampling of only the small volume of the droplet; ii) the lower fluence results in less pronounced oscillations of the droplet confined in the acoustic field. The droplet will not be dissipated out of the acoustic field leading to loss of the sample; iii) the mild laser irradiation results in better spatial and temporal ion plume confinement, leading to better resolution of the detected ion packets. Finally, this knowledge allows the application of ion optics necessary to induce ion flow between the droplet suspended in the acoustic field and the IM spectrometer. The ion optics, composed of 2 electrostatic lenses placed in the near vicinity of the droplet, allow effective focusing of the ion plume and its redirection directly to the IM spectrometer entrance. This novel coupling has proved to be successful for detection of some simple molecules ionizable at the 2.94 µm wavelength. To further demonstrate the applicability of the system, a proof-of-principle reaction was selected, fulfilling the requirements of the system, and was subjected to comprehensive investigation of its performance. Herein, the reaction between N-Boc cysteine methyl ester and allyl alcohol has been performed in a batch reactor and on-line monitored via 1H NMR to establish reaction propagation. With the additional assessment, it was confirmed that the thiol-ene coupling can be performed within first 20 minutes of the irradiation with a reaction yield above 50%, proving that the reaction can be applied as a study case to assess the possibilities of the developed system. T2 - Echtzeit-Überwachung von (Photo)chemischen Reaktionen in Mikroströmungsreaktoren und schwebenden Tropfen durch IR-MALDI Ionenmoblität- und Massenspektrometrie KW - ion mobility spectrometry KW - mass spectrometry KW - acoustically levitated droplets KW - photochemical reactions KW - akustisch schwebende Tropfen KW - Ionenmobilitätspektrometrie KW - Massenspektrometrie KW - Photochemische Reaktionen Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-557298 ER - TY - JOUR A1 - Orland, Andreas A1 - Padubrin, Max T1 - Is there a gender hiring gap in academic economics? Evidence from a network analysis JF - Royal Society Open Science N2 - We collect a network dataset of tenured economics faculty in Austria, Germany and Switzerland. We rank the 100 institutions included with a minimum violation ranking. This ranking is positively and significantly correlated with the Times Higher Education ranking of economics institutions. According to the network ranking, individuals on average go down about 23 ranks from their doctoral institution to their employing institution. While the share of females in our dataset is only 15%, we do not observe a significant gender hiring gap (a difference in rank changes between male and female faculty). We conduct a robustness check with the Handelsblatt and the Times Higher Education ranking. According to these rankings, individuals on average go down only about two ranks. We do not observe a significant gender hiring gap using these two rankings (although the dataset underlying this analysis is small and these estimates are likely to be noisy). Finally, we discuss the limitations of the network ranking in our context. Y1 - 2022 U6 - https://doi.org/10.1098/rsos.210717 SN - 2054-5703 VL - 9 SP - 1 EP - 9 PB - Royal Society of London CY - London ET - 2 ER - TY - JOUR A1 - Eccard, Jana A1 - Herde, Antje A1 - Schuster, Andrea C. A1 - Liesenjohann, Thilo A1 - Knopp, Tatjana A1 - Heckel, Gerald A1 - Dammhahn, Melanie T1 - Fitness, risk taking, and spatial behavior covary with boldness in experimental vole populations JF - Ecology And Evolution N2 - Individuals of a population may vary along a pace-of-life syndrome from highly fecund, short-lived, bold, dispersive “fast” types at one end of the spectrum to less fecund, long-lived, shy, plastic “slow” types at the other end. Risk-taking behavior might mediate the underlying life history trade-off, but empirical evidence supporting this hypothesis is still ambiguous. Using experimentally created populations of common voles (Microtus arvalis)—a species with distinct seasonal life history trajectories—we aimed to test whether individual differences in boldness behavior covary with risk taking, space use, and fitness. We quantified risk taking, space use (via automated tracking), survival, and reproductive success (via genetic parentage analysis) in 8 to 14 experimental, mixed-sex populations of 113 common voles of known boldness type in large grassland enclosures over a significant part of their adult life span and two reproductive events. Populations were assorted to contain extreme boldness types (bold or shy) of both sexes. Bolder individuals took more risks than shyer ones, which did not affect survival. Bolder males but not females produced more offspring than shy conspecifics. Daily home range and core area sizes, based on 95% and 50% Kernel density estimates (20 ± 10 per individual, n = 54 individuals), were highly repeatable over time. Individual space use unfolded differently for sex-boldness type combinations over the course of the experiment. While day ranges decreased for shy females, they increased for bold females and all males. Space use trajectories may, hence, indicate differences in coping styles when confronted with a novel social and physical environment. Thus, interindividual differences in boldness predict risk taking under near-natural conditions and have consequences for fitness in males, which have a higher reproductive potential than females. Given extreme inter- and intra-annual fluctuations in population density in the study species and its short life span, density-dependent fluctuating selection operating differently on the sexes might maintain (co)variation in boldness, risk taking, and pace-of-life. KW - animal personality KW - automated radio telemetry KW - behavioral type KW - fitness KW - home range KW - Microtus arvalis KW - parentage KW - reproductive success Y1 - 2022 U6 - https://doi.org/10.1002/ece3.8521 SN - 2045-7758 SP - 1 EP - 15 PB - John Wiley & Sons, Inc. CY - Vereinigte Staaten ER - TY - THES A1 - Tattarini, Giulia T1 - A job is good, but is a good job healthier? BT - Longitudinal analyses on the health consequences of unemployment and precarious employment in Europe N2 - What are the consequences of unemployment and precarious employment for individuals' health in Europe? What are the moderating factors that may offset (or increase) the health consequences of labor-market risks? How do the effects of these risks vary across different contexts, which differ in their institutional and cultural settings? Does gender, regarded as a social structure, play a role, and how? To answer these questions is the aim of my cumulative thesis. This study aims to advance our knowledge about the health consequences that unemployment and precariousness cause over the life course. In particular, I investigate how several moderating factors, such as gender, the family, and the broader cultural and institutional context, may offset or increase the impact of employment instability and insecurity on individual health. In my first paper, 'The buffering role of the family in the relationship between job loss and self-perceived health: Longitudinal results from Europe, 2004-2011', I and my co-authors measure the causal effect of job loss on health and the role of the family and welfare states (regimes) as moderating factors. Using EU-SILC longitudinal data (2004-2011), we estimate the probability of experiencing 'bad health' following a transition to unemployment by applying linear probability models and undertake separate analyses for men and women. Firstly, we measure whether changes in the independent variable 'job loss' lead to changes in the dependent variable 'self-rated health' for men and women separately. Then, by adding into the model different interaction terms, we measure the moderating effect of the family, both in terms of emotional and economic support, and how much it varies across different welfare regimes. As an identification strategy, we first implement static fixed-effect panel models, which control for time-varying observables and indirect health selection—i.e., constant unobserved heterogeneity. Secondly, to control for reverse causality and path dependency, we implement dynamic fixed-effect panel models, adding a lagged dependent variable to the model. We explore the role of the family by focusing on close ties within households: we consider the presence of a stable partner and his/her working status as a source of social and economic support. According to previous literature, having a partner should reduce the stress from adverse events, thanks to the symbolic and emotional dimensions that such a relationship entails, regardless of any economic benefits. Our results, however, suggest that benefits linked to the presence of a (female) partner also come from the financial stability that (s)he can provide in terms of a second income. Furthermore, we find partners' employment to be at least as important as the mere presence of the partner in reducing the negative effect of job loss on the individual's health by maintaining the household's standard of living and decreasing economic strain on the family. Our results are in line with previous research, which has highlighted that some people cope better than others with adverse life circumstances, and the support provided by the family is a crucial resource in that regard. We also reported an important interaction between the family and the welfare state in moderating the health consequences of unemployment, showing how the compensation effect of the family varies across welfare regimes. The family plays a decisive role in cushioning the adverse consequences of labor market risks in Southern and Eastern welfare states, characterized by less developed social protection systems and –especially the Southern – high level of familialism. The first paper also found important gender differences concerning job loss, family and welfare effects. Of particular interest is the evidence suggesting that health selection works differently for men and women, playing a more prominent role for women than for men in explaining the relationship between job loss and self-perceived health. The second paper, 'Gender roles and selection mechanisms across contexts: A comparative analysis of the relationship between unemployment, self-perceived health, and gender.' investigates more in-depth the gender differential in health driven by unemployment. Being a highly contested issue in literature, we aim to study whether men are more penalized than women or the other way around and the mechanisms that may explain the gender difference. To do that, we rely on two theoretical arguments: the availability of alternative roles and social selection. The first argument builds on the idea that men and women may compensate for the detrimental health consequences of unemployment through the commitment to 'alternative roles,' which can provide for the resources needed to fulfill people's socially constructed needs. Notably, the availability of alternative options depends on the different positions that men and women have in society. Further, we merge the availability of the 'alternative roles' argument with the health selection argument. We assume that health selection could be contingent on people's social position as defined by gender and, thus, explain the gender differential in the relationship between unemployment and health. Ill people might be less reluctant to fall or remain (i.e., self-select) in unemployment if they have alternative roles. In Western societies, women generally have more alternative roles than men and thus more discretion in their labor market attachment. Therefore, health selection should be stronger for them, explaining why unemployment is less menace for women than for their male counterparts. Finally, relying on the idea of different gender regimes, we extended these arguments to comparison across contexts. For example, in contexts where being a caregiver is assumed to be women's traditional and primary roles and the primary breadwinner role is reserved to men, unemployment is less stigmatized, and taking up alternative roles is more socially accepted for women than for men (Hp.1). Accordingly, social (self)selection should be stronger for women than for men in traditional contexts, where, in the case of ill-health, the separation from work is eased by the availability of alternative roles (Hp.2). By focusing on contexts that are representative of different gender regimes, we implement a multiple-step comparative approach. Firstly, by using EU-SILC longitudinal data (2004-2015), our analysis tests gender roles and selection mechanisms for Sweden and Italy, representing radically different gender regimes, thus providing institutional and cultural variation. Then, we limit institutional heterogeneity by focusing on Germany and comparing East- and West-Germany and older and younger cohorts—for West-Germany (SOEP data 1995-2017). Next, to assess the differential impact of unemployment for men and women, we compared (unemployed and employed) men with (unemployed and employed) women. To do so, we calculate predicted probabilities and average marginal effect from two distinct random-effects probit models. Our first step is estimating random-effects models that assess the association between unemployment and self-perceived health, controlling for observable characteristics. In the second step, our fully adjusted model controls for both direct and indirect selection. We do this using dynamic correlated random-effects (CRE) models. Further, based on the fully adjusted model, we test our hypotheses on alternative roles (Hp.1) by comparing several contexts – models are estimated separately for each context. For this hypothesis, we pool men and women and include an interaction term between unemployment and gender, which has the advantage to allow for directly testing whether gender differences in the effect of unemployment exist and are statistically significant. Finally, we test the role of selection mechanisms (Hp.2), using the KHB method to compare coefficients across nested nonlinear models. Specifically, we test the role of selection for the relationship between unemployment and health by comparing the partially-adjusted and fully-adjusted models. To allow selection mechanisms to operate differently between genders, we estimate separate models for men and women. We found support to our first hypotheses—the context where people are embedded structures the relationship between unemployment, health, and gender. We found no gendered effect of unemployment on health in the egalitarian context of Sweden. Conversely, in the traditional context of Italy, we observed substantive and statistically significant gender differences in the effect of unemployment on bad health, with women suffering less than men. We found the same pattern for comparing East and West Germany and younger and older cohorts in West Germany. On the contrary, our results did not support our theoretical argument on social selection. We found that in Sweden, women are more selected out of employment than men. In contrast, in Italy, health selection does not seem to be the primary mechanism behind the gender differential—Italian men and women seem to be selected out of employment to the same extent. Namely, we do not find any evidence that health selection is stronger for women in more traditional countries (Hp2), despite the fact that the institutional and the cultural context would offer them a more comprehensive range of 'alternative roles' relative to men. Moreover, our second hypothesis is also rejected in the second and third comparisons, where the cross-country heterogeneity is reduced to maximize cultural differences within the same institutional context. Further research that addresses selection into inactivity is needed to evaluate the interplay between selection and social roles across gender regimes. While the health consequences of unemployment have been on the research agenda for a pretty long time, the interest in precarious employment—defined as the linking of the vulnerable worker to work that is characterized by uncertainty and insecurity concerning pay, the stability of the work arrangement, limited access to social benefits, and statutory protections—has emerged only later. Since the 80s, scholars from different disciplines have raised concerns about the social consequences of de-standardization of employment relationships. However, while work has become undoubtedly more precarious, very little is known about its causal effect on individual health and the role of gender as a moderator. These questions are at the core of my third paper : 'Bad job, bad health? A longitudinal analysis of the interaction between precariousness, gender and self-perceived health in Germany'. Herein, I investigate the multidimensional nature of precarious employment and its causal effect on health, particularly focusing on gender differences. With this paper, I aim at overcoming three major shortcomings of earlier studies: The first one regards the cross-sectional nature of data that prevents the authors from ruling out unobserved heterogeneity as a mechanism for the association between precarious employment and health. Indeed, several unmeasured individual characteristics—such as cognitive abilities—may confound the relationship between precarious work and health, leading to biased results. Secondly, only a few studies have directly addressed the role of gender in shaping the relationship. Moreover, available results on the gender differential are mixed and inconsistent: some found precarious employment being more detrimental for women's health, while others found no gender differences or stronger negative association for men. Finally, previous attempts to an empirical translation of the employment precariousness (EP) concept have not always been coherent with their theoretical framework. EP is usually assumed to be a multidimensional and continuous phenomenon; it is characterized by different dimensions of insecurity that may overlap in the same job and lead to different "degrees of precariousness." However, researchers have predominantly focused on one-dimensional indicators—e.g., temporary employment, subjective job insecurity—to measure EP and study the association with health. Besides the fact that this approach partially grasps the phenomenon's complexity, the major problem is the inconsistency of evidence that it has produced. Indeed, this line of inquiry generally reveals an ambiguous picture, with some studies finding substantial adverse effects of temporary over permanent employment, while others report only minor differences. To measure the (causal) effect of precarious work on self-rated health and its variation by gender, I focus on Germany and use four waves from SOEP data (2003, 2007, 2011, and 2015). Germany is a suitable context for my study. Indeed, since the 1980s, the labor market and welfare system have been restructured in many ways to increase the German economy's competitiveness in the global market. As a result, the (standard) employment relationship has been de-standardized: non-standard and atypical employment arrangements—i.e., part-time work, fixed-term contracts, mini-jobs, and work agencies—have increased over time while wages have lowered, even among workers with standard work. In addition, the power of unions has also fallen over the last three decades, leaving a large share of workers without collective protection. Because of this process of de-standardization, the link between wage employment and strong social rights has eroded, making workers more powerless and more vulnerable to labor market risks than in the past. EP refers to this uneven distribution of power in the employment relationship, which can be detrimental to workers' health. Indeed, by affecting individuals' access to power and other resources, EP puts precarious workers at risk of experiencing health shocks and influences their ability to gain and accumulate health advantages (Hp.1). Further, the focus on Germany allows me to investigate my second research question on the gender differential. Germany is usually regarded as a traditionalist gender regime: a context characterized by a configuration of roles. Here, being a caregiver is assumed to be women's primary role, whereas the primary breadwinner role is reserved for men. Although many signs of progress have been made over the last decades towards a greater equalization of opportunities and more egalitarianism, the breadwinner model has barely changed towards a modified version. Thus, women usually take on the double role of workers (the so-called secondary earner) and caregivers, and men still devote most of their time to paid work activities. Moreover, the overall upward trend towards more egalitarian gender ideologies has leveled off over the last decades, moving notably towards more traditional gender ideologies. In this setting, two alternative hypotheses are possible. Firstly, I assume that the negative relationship between EP and health is stronger for women than for men. This is because women are systematically more disadvantaged than men in the public and private spheres of life, having less access to formal and informal sources of power. These gender-related power asymmetries may interact with EP-related power asymmetries resulting in a stronger effect of EP on women's health than on men's health (Hp.2). An alternative way of looking at the gender differential is to consider the interaction that precariousness might have with men's and women's gender identities. According to this view, the negative relationship between EP and health is weaker for women than for men (Hp.2a). In a society with a gendered division of labor and a strong link between masculine identities and stable and well-rewarded job—i.e., a job that confers the role of primary family provider—a male worker with precarious employment might violate the traditional male gender role. Men in precarious jobs may perceive themselves (and by others) as possessing a socially undesirable characteristic, which conflicts with the stereotypical idea of themselves as the male breadwinner. Engaging in behaviors that contradict stereotypical gender identity may decrease self-esteem and foster feelings of inferiority, helplessness, and jealousy, leading to poor health. I develop a new indicator of EP that empirically translates a definition of EP as a multidimensional and continuous phenomenon. I assume that EP is a latent construct composed of seven dimensions of insecurity chosen according to the theory and previous empirical research: Income insecurity, social insecurity, legal insecurity, employment insecurity, working-time insecurity, representation insecurity, worker's vulnerability. The seven dimensions are proxied by eight indicators available in the four waves of the SOEP dataset. The EP composite indicator is obtained by performing a multiple correspondence analysis (MCA) on the eight indicators. This approach aims to construct a summary scale in which all dimensions contribute jointly to the measured experience of precariousness and its health impact. Further, the relationship between EP and 'general self-perceived health' is estimated by applying ordered probit random-effects estimators and calculating average marginal effect (further AME). Then, to control for unobserved heterogeneity, I implement correlated random-effects models that add to the model the within-individual means of the time-varying independent variables. To test the significance of the gender differential, I add an interaction term between EP and gender in the fully adjusted model in the pooled sample. My correlated random-effects models showed EP's negative and substantial 'effect' on self-perceived health for both men and women. Although nonsignificant, the evidence seems in line with previous cross-sectional literature. It supports the hypothesis that employment precariousness could be detrimental to workers' health. Further, my results showed the crucial role of unobserved heterogeneity in shaping the health consequences of precarious employment. This is particularly important as evidence accumulates, yet it is still mostly descriptive. Moreover, my results revealed a substantial difference among men and women in the relationship between EP and health: when EP increases, the risk of experiencing poor health increases much more for men than for women. This evidence falsifies previous theory according to whom the gender differential is contingent on the structurally disadvantaged position of women in western societies. In contrast, they seem to confirm the idea that men in precarious work could experience role conflict to a larger extent than women, as their self-standard is supposed to be the stereotypical breadwinner worker with a good and well-rewarded job. Finally, results from the multiple correspondence analysis contribute to the methodological debate on precariousness, showing that a multidimensional and continuous indicator can express a latent variable of EP. All in all, complementarities are revealed in the results of unemployment and employment precariousness, which have two implications: Policy-makers need to be aware that the total costs of unemployment and precariousness go far beyond the economic and material realm penetrating other fundamental life domains such as individual health. Moreover, they need to balance the trade-off between protecting adequately unemployed people and fostering high-quality employment in reaction to the highlighted market pressures. In this sense, the further development of a (universalistic) welfare state certainly helps mitigate the adverse health effects of unemployment and, therefore, the future costs of both individuals' health and welfare spending. In addition, the presence of a working partner is crucial for reducing the health consequences of employment instability. Therefore, policies aiming to increase female labor market participation should be promoted, especially in those contexts where the welfare state is less developed. Moreover, my results support the significance of taking account of a gender perspective in health research. The findings of the three articles show that job loss, unemployment, and precarious employment, in general, have adverse effects on men's health but less or absent consequences for women's health. Indeed, this suggests the importance of labor and health policies that consider and further distinguish the specific needs of the male and female labor force in Europe. Nevertheless, a further implication emerges: the health consequences of employment instability and de-standardization need to be investigated in light of the gender arrangements and the transforming gender relationships in specific cultural and institutional contexts. My results indeed seem to suggest that women's health advantage may be a transitory phenomenon, contingent on the predominant gendered institutional and cultural context. As the structural difference between men's and women's position in society is eroded, egalitarianism becomes the dominant normative status, so will probably be the gender difference in the health consequences of job loss and precariousness. Therefore, while gender equality in opportunities and roles is a desirable aspect for contemporary societies and a political goal that cannot be postponed further, this thesis raises a further and maybe more crucial question: What kind of equality should be pursued to provide men and women with both good life quality and equal chances in the public and private spheres? In this sense, I believe that social and labor policies aiming to reduce gender inequality in society should focus on improving women's integration into the labor market, implementing policies targeting men, and facilitating their involvement in the private sphere of life. Equal redistribution of social roles could activate a crucial transformation of gender roles and the cultural models that sustain and still legitimate gender inequality in Western societies. KW - unemployment KW - employment precariousness KW - self-rated health KW - gender KW - family KW - welfare and gender regimes Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-536723 ER - TY - THES A1 - Brill, Fabio Alexander T1 - Applications of machine learning and open geospatial data in flood risk modelling N2 - Der technologische Fortschritt erlaubt es, zunehmend komplexe Vorhersagemodelle auf Basis immer größerer Datensätze zu produzieren. Für das Risikomanagement von Naturgefahren sind eine Vielzahl von Modellen als Entscheidungsgrundlage notwendig, z.B. in der Auswertung von Beobachtungsdaten, für die Vorhersage von Gefahrenszenarien, oder zur statistischen Abschätzung der zu erwartenden Schäden. Es stellt sich also die Frage, inwiefern moderne Modellierungsansätze wie das maschinelle Lernen oder Data-Mining in diesem Themenbereich sinnvoll eingesetzt werden können. Zusätzlich ist im Hinblick auf die Datenverfügbarkeit und -zugänglichkeit ein Trend zur Öffnung (open data) zu beobachten. Thema dieser Arbeit ist daher, die Möglichkeiten und Grenzen des maschinellen Lernens und frei verfügbarer Geodaten auf dem Gebiet der Hochwasserrisikomodellierung im weiteren Sinne zu untersuchen. Da dieses übergeordnete Thema sehr breit ist, werden einzelne relevante Aspekte herausgearbeitet und detailliert betrachtet. Eine prominente Datenquelle im Bereich Hochwasser ist die satellitenbasierte Kartierung von Überflutungsflächen, die z.B. über den Copernicus Service der Europäischen Union frei zur Verfügung gestellt werden. Große Hoffnungen werden in der wissenschaftlichen Literatur in diese Produkte gesetzt, sowohl für die akute Unterstützung der Einsatzkräfte im Katastrophenfall, als auch in der Modellierung mittels hydrodynamischer Modelle oder zur Schadensabschätzung. Daher wurde ein Fokus in dieser Arbeit auf die Untersuchung dieser Flutmasken gelegt. Aus der Beobachtung, dass die Qualität dieser Produkte in bewaldeten und urbanen Gebieten unzureichend ist, wurde ein Verfahren zur nachträglichenVerbesserung mittels maschinellem Lernen entwickelt. Das Verfahren basiert auf einem Klassifikationsalgorithmus der nur Trainingsdaten von einer vorherzusagenden Klasse benötigt, im konkreten Fall also Daten von Überflutungsflächen, nicht jedoch von der negativen Klasse (trockene Gebiete). Die Anwendung für Hurricane Harvey in Houston zeigt großes Potenzial der Methode, abhängig von der Qualität der ursprünglichen Flutmaske. Anschließend wird anhand einer prozessbasierten Modellkette untersucht, welchen Einfluss implementierte physikalische Prozessdetails auf das vorhergesagte statistische Risiko haben. Es wird anschaulich gezeigt, was eine Risikostudie basierend auf etablierten Modellen leisten kann. Solche Modellketten sind allerdings bereits für Flusshochwasser sehr komplex, und für zusammengesetzte oder kaskadierende Ereignisse mit Starkregen, Sturzfluten, und weiteren Prozessen, kaum vorhanden. Im vierten Kapitel dieser Arbeit wird daher getestet, ob maschinelles Lernen auf Basis von vollständigen Schadensdaten einen direkteren Weg zur Schadensmodellierung ermöglicht, der die explizite Konzeption einer solchen Modellkette umgeht. Dazu wird ein staatlich erhobener Datensatz der geschädigten Gebäude während des schweren El Niño Ereignisses 2017 in Peru verwendet. In diesem Kontext werden auch die Möglichkeiten des Data-Mining zur Extraktion von Prozessverständnis ausgelotet. Es kann gezeigt werden, dass diverse frei verfügbare Geodaten nützliche Informationen für die Gefahren- und Schadensmodellierung von komplexen Flutereignissen liefern, z.B. satellitenbasierte Regenmessungen, topographische und hydrographische Information, kartierte Siedlungsflächen, sowie Indikatoren aus Spektraldaten. Zudem zeigen sich Erkenntnisse zu den Schädigungsprozessen, die im Wesentlichen mit den vorherigen Erwartungen in Einklang stehen. Die maximale Regenintensität wirkt beispielsweise in Städten und steilen Schluchten stärker schädigend, während die Niederschlagssumme in tiefliegenden Flussgebieten und bewaldeten Regionen als aussagekräftiger befunden wurde. Ländliche Gebiete in Peru weisen in der präsentierten Studie eine höhere Vulnerabilität als die Stadtgebiete auf. Jedoch werden auch die grundsätzlichen Grenzen der Methodik und die Abhängigkeit von spezifischen Datensätzen and Algorithmen offenkundig. In der übergreifenden Diskussion werden schließlich die verschiedenen Methoden – prozessbasierte Modellierung, prädiktives maschinelles Lernen, und Data-Mining – mit Blick auf die Gesamtfragestellungen evaluiert. Im Bereich der Gefahrenbeobachtung scheint eine Fokussierung auf neue Algorithmen sinnvoll. Im Bereich der Gefahrenmodellierung, insbesondere für Flusshochwasser, wird eher die Verbesserung von physikalischen Modellen, oder die Integration von prozessbasierten und statistischen Verfahren angeraten. In der Schadensmodellierung fehlen nach wie vor die großen repräsentativen Datensätze, die für eine breite Anwendung von maschinellem Lernen Voraussetzung ist. Daher ist die Verbesserung der Datengrundlage im Bereich der Schäden derzeit als wichtiger einzustufen als die Auswahl der Algorithmen. N2 - Technological progress allows for producing ever more complex predictive models on the basis of increasingly big datasets. For risk management of natural hazards, a multitude of models is needed as basis for decision-making, e.g. in the evaluation of observational data, for the prediction of hazard scenarios, or for statistical estimates of expected damage. The question arises, how modern modelling approaches like machine learning or data-mining can be meaningfully deployed in this thematic field. In addition, with respect to data availability and accessibility, the trend is towards open data. Topic of this thesis is therefore to investigate the possibilities and limitations of machine learning and open geospatial data in the field of flood risk modelling in the broad sense. As this overarching topic is broad in scope, individual relevant aspects are identified and inspected in detail. A prominent data source in the flood context is satellite-based mapping of inundated areas, for example made openly available by the Copernicus service of the European Union. Great expectations are directed towards these products in scientific literature, both for acute support of relief forces during emergency response action, and for modelling via hydrodynamic models or for damage estimation. Therefore, a focus of this work was set on evaluating these flood masks. From the observation that the quality of these products is insufficient in forested and built-up areas, a procedure for subsequent improvement via machine learning was developed. This procedure is based on a classification algorithm that only requires training data from a particular class to be predicted, in this specific case data of flooded areas, but not of the negative class (dry areas). The application for hurricane Harvey in Houston shows the high potential of this method, which depends on the quality of the initial flood mask. Next, it is investigated how much the predicted statistical risk from a process-based model chain is dependent on implemented physical process details. Thereby it is demonstrated what a risk study based on established models can deliver. Even for fluvial flooding, such model chains are already quite complex, though, and are hardly available for compound or cascading events comprising torrential rainfall, flash floods, and other processes. In the fourth chapter of this thesis it is therefore tested whether machine learning based on comprehensive damage data can offer a more direct path towards damage modelling, that avoids explicit conception of such a model chain. For that purpose, a state-collected dataset of damaged buildings from the severe El Niño event 2017 in Peru is used. In this context, the possibilities of data-mining for extracting process knowledge are explored as well. It can be shown that various openly available geodata sources contain useful information for flood hazard and damage modelling for complex events, e.g. satellite-based rainfall measurements, topographic and hydrographic information, mapped settlement areas, as well as indicators from spectral data. Further, insights on damaging processes are discovered, which mainly are in line with prior expectations. The maximum intensity of rainfall, for example, acts stronger in cities and steep canyons, while the sum of rain was found more informative in low-lying river catchments and forested areas. Rural areas of Peru exhibited higher vulnerability in the presented study compared to urban areas. However, the general limitations of the methods and the dependence on specific datasets and algorithms also become obvious. In the overarching discussion, the different methods – process-based modelling, predictive machine learning, and data-mining – are evaluated with respect to the overall research questions. In the case of hazard observation it seems that a focus on novel algorithms makes sense for future research. In the subtopic of hazard modelling, especially for river floods, the improvement of physical models and the integration of process-based and statistical procedures is suggested. For damage modelling the large and representative datasets necessary for the broad application of machine learning are still lacking. Therefore, the improvement of the data basis in the field of damage is currently regarded as more important than the selection of algorithms. KW - flood risk KW - machine learning KW - open data KW - damage modelling KW - data-mining KW - Schadensmodellierung KW - Data-Mining KW - Hochwasserrisiko KW - maschinelles Lernen KW - offene Daten Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-555943 ER - TY - THES A1 - Niemz, Peter T1 - Imaging and modeling of hydraulic fractures in crystalline rock via induced seismic activity T1 - Charakterisierung und Modellierung hydraulischer Brüche in Kristallingestein mit Hilfe induzierter Seismizität N2 - Enhanced geothermal systems (EGS) are considered a cornerstone of future sustainable energy production. In such systems, high-pressure fluid injections break the rock to provide pathways for water to circulate in and heat up. This approach inherently induces small seismic events that, in rare cases, are felt or can even cause damage. Controlling and reducing the seismic impact of EGS is crucial for a broader public acceptance. To evaluate the applicability of hydraulic fracturing (HF) in EGS and to improve the understanding of fracturing processes and the hydromechanical relation to induced seismicity, six in-situ, meter-scale HF experiments with different injection schemes were performed under controlled conditions in crystalline rock in a depth of 410 m at the Äspö Hard Rock Laboratory (Sweden). I developed a semi-automated, full-waveform-based detection, classification, and location workflow to extract and characterize the acoustic emission (AE) activity from the continuous recordings of 11 piezoelectric AE sensors. Based on the resulting catalog of 20,000 AEs, with rupture sizes of cm to dm, I mapped and characterized the fracture growth in great detail. The injection using a novel cyclic injection scheme (HF3) had a lower seismic impact than the conventional injections. HF3 induced fewer AEs with a reduced maximum magnitude and significantly larger b-values, implying a decreased number of large events relative to the number of small ones. Furthermore, HF3 showed an increased fracture complexity with multiple fractures or a fracture network. In contrast, the conventional injections developed single, planar fracture zones (Publication 1). An independent, complementary approach based on a comparison of modeled and observed tilt exploits transient long-period signals recorded at the horizontal components of two broad-band seismometers a few tens of meters apart from the injections. It validated the efficient creation of hydraulic fractures and verified the AE-based fracture geometries. The innovative joint analysis of AEs and tilt signals revealed different phases of the fracturing process, including the (re-)opening, growth, and aftergrowth of fractures, and provided evidence for the reactivation of a preexisting fault in one of the experiments (Publication 2). A newly developed network-based waveform-similarity analysis applied to the massive AE activity supports the latter finding. To validate whether the reduction of the seismic impact as observed for the cyclic injection schemes during the Äspö mine-scale experiments is transferable to other scales, I additionally calculated energy budgets for injection experiments from previously conducted laboratory tests and from a field application. Across all three scales, the cyclic injections reduce the seismic impact, as depicted by smaller maximum magnitudes, larger b-values, and decreased injection efficiencies (Publication 3). N2 - Hydraulisch-stimulierte tiefengeothermale Systeme (Enhanced Geothermal systems, EGS) gelten als einer der Eckpfeiler für die nachhaltige Energieerzeugung der Zukunft. In diesen geothermalen Systemen wird heißes Tiefengestein durch Fluidinjektionen unter hohem Druck aufgebrochen, um Wegsamkeiten zur Erwärmung von Wasser oder anderen Fluiden zu schaffen. Beim Aufbrechen werden zwangsläufig kleine seismische Ereignisse ausgelöst (induzierte Seismizität), die in sehr seltenen Fällen an der Oberfläche spürbar sind, jedoch in extremen Fällen auch Schäden verursachen können. Die Kontrolle bzw. die Reduzierung der seismischen Aktivität in EGS ist daher ein entscheidender Punkt, damit diese Art der Energiegewinnung eine breite gesellschaftliche Akzeptanz findet. Grundlage dieser Dissertation ist eine Serie von kontrollierten, hydraulischen Bruchexperimenten mit Bruchdimensionen von einigen Metern. Die Experimente wurden in einer Tiefe von 410 m in kristallinem Gestein eines Versuchsbergwerks (Äspö Hard Rock Laboratory, Schweden) mit unterschiedlichen Injektionsstrategien durchgeführt. Die detaillierte Auswertung der Bruch-Experimente in dieser Dissertation zielt darauf ab, die Nutzbarkeit von hydraulischen Stimulationen (hydraulic fracturing, HF) in EGS zu untersuchen und das Verständnis von Bruchprozessen sowie der hydromechanischen Beziehung zur induzierten Seismizität zu verbessern. Um die Schallemissionsaktivität (acoustic emissions, AE), die durch 11 piezoelektrische AE-Sensoren kontinuierlich aufgezeichnet wurde, zu extrahieren und zu charakterisieren, wurde ein halbautomatischer, wellenformbasierter Detektions-, Klassifizierungs- und Lokalisierungsworkflow entwickelt. Mit Hilfe des resultierenden Katalogs von 20000 AEs wurde das Bruchwachstum detailliert kartiert und charakterisiert. Das Experiment mit der neuartigen, zyklischen Injektionsstrategie (HF3) weist einen geringeren seismischen Fußabdruck auf als die Standard-Injektionsstrategie. HF3 induzierte weniger AEs und eine kleinere Maximalmagnitude. Außerdem hatte das Experiment einen signifikant höheren b-Wert, was einer verringerten Anzahl von großen AEs relativ zur Anzahl der kleineren AEs entspricht. Darüber hinaus zeigte HF3 eine erhöhte Komplexität im Bruchmuster mit mehreren Brüchen bzw. einem Netzwerk von Brüchen. Im Gegensatz dazu entwickelten die Standard-Injektionen einzelne, ebene Bruchzonen (Publikation 1). Zusätzlich zu den induzierten AEs wurden transiente, langperiodische Signale auf den horizontalen Komponenten von zwei Breitband-Seismometern, die wenige Meter von den Brüchen installiert waren, ausgewertet. Diese Signale wurden als Neigungssignale interpretiert und mit modellierten Neigungssignalen verglichen. Der Vergleich zeigt unabhängig, dass hydraulische Brüche geöffnet wurden und bestätigt, dass die AE-basierte Analyse die Bruchgeometrie verlässlich kartieren kann. Die gemeinsame Betrachtung von AEs und Neigungssignalen offenbart verschiedene Phasen des Bruchprozesses: das (wiederholte) Öffnen des Bruches, das Bruchwachstum und das weitere Wachsen des Bruches nach dem Ende der Injektion. Außerdem liefert die Analyse Hinweise auf die Reaktivierung einer natürlichen Bruchzone in einem der Experimente (Publikation 2). Eine neuentwickelte und hier präsentierte Wellenform-Ähnlichkeitsanalyse, die Informationen des gesamten Sensornetzwerkes nutzt und zum ersten Mal auf einen umfangreichen AE-Katalog angewendet wurde, unterstützt diese Interpretation. Um zu validieren, ob die verringerte Seismizität während der zyklischen Injektion auf der Meter-Skala (Bergwerk) auf andere Maßstäbe übertragbar ist, wurden Energie-Budgets für Injektionsexperimente aus zuvor durchgeführten Laborversuchen und aus einem Tiefengeothermie-Projekt berechnet. Über alle drei Skalen hinweg zeigen die zyklischen Injektionen einen verringerten seismischen Fußabdruck mit kleineren Maximalmagnituden, größeren b-Werte und einem kleineren Verhältnis von seismisch-abgestrahlter zu injizierter Energie (Publikation 3). KW - induced seismicity KW - hydraulic fracturing KW - enhanced geothermal systems (EGS) KW - injection KW - deformation KW - acoustic emissions KW - fracture growth KW - injection scheme KW - basement rock KW - Schallemissionen KW - Grundgestein KW - Deformation KW - verbesserte geothermische Systeme KW - Bruchausbreitung KW - hydraulisches Aufbrechen KW - Induzierte Seismizität KW - Injektion KW - Injektionsschema Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-556593 ER - TY - THES A1 - Richter, Maximilian Jacob Enzo Amandus T1 - Continental rift dynamics across the scales T1 - Dynamiken kontinentaler Grabenbrüche über die Skalen BT - numerical modelling of localisation processes BT - numerische Modellierung von Lokalisations-Prozessen N2 - Localisation of deformation is a ubiquitous feature in continental rift dynamics and observed across drastically different time and length scales. This thesis comprises one experimental and two numerical modelling studies investigating strain localisation in (1) a ductile shear zone induced by a material heterogeneity and (2) in an active continental rift setting. The studies are related by the fact that the weakening mechanisms on the crystallographic and grain size scale enable bulk rock weakening, which fundamentally enables the formation of shear zones, continental rifts and hence plate tectonics. Aiming to investigate the controlling mechanisms on initiation and evolution of a shear zone, the torsion experiments of the experimental study were conducted in a Patterson type apparatus with strong Carrara marble cylinders with a weak, planar Solnhofen limestone inclusion. Using state-of-the-art numerical modelling software, the torsion experiments were simulated to answer questions regarding localisation procedure like stress distribution or the impact of rheological weakening. 2D numerical models were also employed to integrate geophysical and geological data to explain characteristic tectonic evolution of the Southern and Central Kenya Rift. Key elements of the numerical tools are a randomized initial strain distribution and the usage of strain softening. During the torsion experiments, deformation begins to localise at the limestone inclusion tips in a process zone, which propagates into the marble matrix with increasing deformation until a ductile shear zone is established. Minor indicators for coexisting brittle deformation are found close to the inclusion tip and presumed to slightly facilitate strain localisation besides the dominant ductile deformation processes. The 2D numerical model of the torsion experiment successfully predicts local stress concentration and strain rate amplification ahead of the inclusion in first order agreement with the experimental results. A simple linear parametrization of strain weaking enables high accuracy reproduction of phenomenological aspects of the observed weakening. The torsion experiments suggest that loading conditions do not affect strain localisation during high temperature deformation of multiphase material with high viscosity contrasts. A numerical simulation can provide a way of analysing the process zone evolution virtually and extend the examinable frame. Furthermore, the nested structure and anastomosing shape of an ultramylonite band was mimicked with an additional second softening step. Rheological weakening is necessary to establish a shear zone in a strong matrix around a weak inclusion and for ultramylonite formation. Such strain weakening laws are also incorporated into the numerical models of the Southern and Central Kenya Rift that capture the characteristic tectonic evolution. A three-stage early rift evolution is suggested that starts with (1) the accommodation of strain by a single border fault and flexure of the hanging-wall crust, after which (2) faulting in the hanging-wall and the basin centre increases before (3) the early-stage asymmetry is lost and basinward localisation of deformation occurs. Along-strike variability of rifts can be produced by modifying the initial random noise distribution. In summary, the three studies address selected aspects of the broad range of mechanisms and processes that fundamentally enable the deformation of rock and govern the localisation patterns across the scales. In addition to the aforementioned results, the first and second manuscripts combined, demonstrate a procedure to find new or improve on existing numerical formulations for specific rheologies and their dynamic weakening. These formulations are essential in addressing rock deformation from the grain to the global scale. As within the third study of this thesis, where geodynamic controls on the evolution of a rift were examined and acquired by the integration of geological and geophysical data into a numerical model. N2 - Die Lokalisierung von Deformation ist ein allgegenwärtiges Merkmal in der Dynamik von Grabenbrüchen bzw. Riftzonen und wird über verschiedene Zeit- und Längenskalen beobachtet. Diese Arbeit umfasst eine experimentelle und zwei numerische Studien zur Untersuchung der Lokalisierung von Deformation in (1) einer durch eine Materialheterogenität induzierten duktilen Scherzone und (2) in einem aktiven Kontinentalgraben. Die Studien verbindet, dass die Schwächungsmechanismen auf der kristallographischen Skala und der Korngrößenskala eine Enthärtung eines Gesteinkörpers ermöglicht, was im Wesentlichen die Bildung von Scherzonen, Grabenbrüchen und damit Plattentektonik ermöglicht. Um die Kontrollmechanismen für die Initiierung und Entwicklung einer Scherzone zu untersuchen, wurden die Torsionsexperimente der experimentellen Studie in einem Patterson-Gerät an starken Carrara-Marmorzylinder mit einer schwachen, planaren Solnhofen-Kalksteineinschluss durchgeführt. Mit modernster numerischer Modellierungssoftware wurden die Torsionsexperimente simuliert, um weitere Fragen zum Lokalisierungsablauf wie die Verteilung der Spannung oder den Einfluss rheologischer Schwächung zu beantworten. Numerische 2D-Modelle wurden auch verwendet, um geophysikalische und geologische Daten zu kombinieren, um die charakteristische tektonische Entwicklung des südlichen und zentralen Kenia-Rifts zu erklären. Schlüsselelemente der verwendeten numerischen Werkzeuge sind eine randomisierte Anfangsverteilung des Strain und der Einsatz von Strain basierter Enthärtung. Während der Torsionsversuche lokalisiert die Deformation zunächst an den Kalksteineinschlussspitzen in einer Prozesszone, die sich mit zunehmender Deformation in die Marmormatrix ausbreitet bis sich eine duktile Scherzone einstellt. Neben den dominierenden duktilen Verformungsprozessen werden geringfügige Indikatoren für eine koexistierende spröde Verformung nahe der Einschlussspitzen gefunden und es wird angenommen, dass diese die Lokalisierung der Deformation geringfügig erleichtern. In erster Ordnung sagt das numerische 2D-Modell des Torsionsexperiments erfolgreich lokale Spannungskonzentration und Strainratenverstärkung vor der Inklusion in Übereinstimmung mit den experimentellen Ergebnissen vorher. Eine einfache lineare Parametrisierung der Enthärtung durch Strain ermöglicht eine genaue Reproduktion phänomenologischer Aspekte der beobachteten Schwächung. Die Torsionsexperimente legen nahe, dass die Randbedingungen die Lokalisierung des Strain während der Hochtemperaturverformung von Mehrphasenmaterial mit hohen Viskositätskontrasten nicht beeinflussen. Die numerische Simulation ermöglicht es, die Entwicklung der Prozesszone virtuell zu analysieren und den Untersuchungsrahmen zu erweitern. Darüber hinaus wurde die verschachtelte Struktur und anastomosierende Form eines Ultramylonitbandes mit einem zusätzlichen zweiten Enthärtungsschritt nachgeahmt. Die rheologische Schwächung ist notwendig, um eine Scherzone in einer starken Matrix um einen schwachen Einschluss herum und für die Ultramylonitbildung zu etablieren. Solche Schwächungsgesetze, die auf Strain basieren, fließen auch in die numerischen Modelle des südlichen und zentralen Kenia-Rifts ein, die die charakteristische tektonische Entwicklung erfassen. Es wird eine dreistufige frühe Riftentwicklung vorgeschlagen, die mit (1) der Anpassung von Spannungen durch eine einzelne Grenzstörung und Biegung der hangenden Kruste beginnt, wonach (2) die Verwerfung im Hangenden und im Beckenzentrum zunimmt, bevor (3) die Asymmetrie des Frühstadiums verloren geht und es zu einer beckenseitigen Deformationslokalisierung kommt. Die Variabilität von Rissen entlang des Rifts kann durch Modifizieren der anfänglichen zufälligen Rauschverteilung erzeugt werden. Zusammenfassend befassen sich die drei Studien mit ausgewählten Aspekten der breiten Palette von Mechanismen und Prozessen, die die Deformation von Gestein grundlegend ermöglichen und die Lokalisierungsmuster über die Skalen bestimmen. Zusätzlich zu den oben genannten Ergebnissen demonstrieren das erste und zweite Manuskript in Kombination ein Verfahren, um neue oder bestehende numerische Formulierungen für spezifische Rheologien und deren dynamische Schwächung zu finden oder zu verbessern. Diese Formulierungen sind essenziell, um Gesteinsverformung von der Korngrößen bis zur globalen Skala zu untersuchen. Wie in der dritten Studie dieser Dissertation, in der geodynamische Kontrollen auf die Entwicklung eines Grabenbruchs durch die Integration geologischer und geophysikalischer Daten in ein numerisches Modell untersucht und erfasst wurden. KW - Strain Localisation KW - Continental Rifts KW - Torsion Experiments KW - Geodynamic Modelling KW - 2D Numerical Modelling KW - Lokalisierung von Deformation KW - Grabenbrüche KW - Geodynamische Modellierung KW - Torsionsexperimente KW - Numerische 2D Modellierung Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-550606 ER - TY - JOUR A1 - Figueroa Campos, Gustavo Adolfo A1 - G. K. T. Kruizenga, Johannes A1 - Sagu Tchewonpi, Sorel A1 - Schwarz, Steffen A1 - Homann, Thomas A1 - Taubert, Andreas A1 - Rawel, Harshadrai Manilal T1 - Effect of the post-harvest processing on protein modification in green coffee beans by phenolic compounds JF - Foods : open access journal N2 - The protein fraction, important for coffee cup quality, is modified during post-harvest treatment prior to roasting. Proteins may interact with phenolic compounds, which constitute the major metabolites of coffee, where the processing affects these interactions. This allows the hypothesis that the proteins are denatured and modified via enzymatic and/or redox activation steps. The present study was initiated to encompass changes in the protein fraction. The investigations were limited to major storage protein of green coffee beans. Fourteen Coffea arabica samples from various processing methods and countries were used. Different extraction protocols were compared to maintain the status quo of the protein modification. The extracts contained about 4–8 µg of chlorogenic acid derivatives per mg of extracted protein. High-resolution chromatography with multiple reaction monitoring was used to detect lysine modifications in the coffee protein. Marker peptides were allocated for the storage protein of the coffee beans. Among these, the modified peptides K.FFLANGPQQGGK.E and R.LGGK.T of the α-chain and R.ITTVNSQK.I and K.VFDDEVK.Q of β-chain were detected. Results showed a significant increase (p < 0.05) of modified peptides from wet processed green beans as compared to the dry ones. The present study contributes to a better understanding of the influence of the different processing methods on protein quality and its role in the scope of coffee cup quality and aroma. View Full-Text KW - Arabica coffee KW - coffee processing KW - protein modification KW - bound phenolic compounds KW - peptide biomarkers KW - LC-MS/MS Y1 - 2022 U6 - https://doi.org/10.3390/foods11020159 SN - 2304-8158 VL - 11 PB - MDPI CY - Basel, Schweiz ET - 2 ER - TY - THES A1 - Brenner, Andri Caspar T1 - Sustainable urban growth T1 - Nachhaltige urbane Wachstumspfade BT - technology supply and agglomeration economies in the city BT - Angebote an Technologie und Agglomerationsexternalitäten in den Städten N2 - This dissertation explores the determinants for sustainable and socially optimalgrowth in a city. Two general equilibrium models establish the base for this evaluation, each adding its puzzle piece to the urban sustainability discourse and examining the role of non-market-based and market-based policies for balanced growth and welfare improvements in different theory settings. Sustainable urban growth either calls for policy actions or a green energy transition. Further, R&D market failures can pose severe challenges to the sustainability of urban growth and the social optimality of decentralized allocation decisions. Still, a careful (holistic) combination of policy instruments can achieve sustainable growth and even be first best. N2 - Diese Dissertation untersucht die Determinanten für ein nachhaltiges und sozial optimales Wachstum in den Städten. Zwei endogene Wachstumsmodelle untersuchen hierzu die Rolle von nichtmarktbasierten und marktbasierten Politikeingriffen. Jedes Modell fügt dabei dem städtischen Nachhaltigkeitsdiskurs sein eigenes Puzzleteil hinzu. Nachhaltiges städtisches Wachstum erfordert entweder politische Maßnahmen oder eine grüne Energiewende. Darüber hinaus können Verzerrungen im Forschungsmarkt ernsthafte Herausforderungen für die Nachhaltigkeit des städtischen Wachstums und für die soziale Optimalität dezentralisierter Allokationsentscheidungen darstellen. Dennoch kann eine sorgfältige (ganzheitliche) Kombination von Politikinstrumenten Erfolg haben und zu einem sozial optimalen Resultat führen. KW - urban growth KW - sustainable development KW - density effects KW - innovations in the city KW - Stadtwachstumsraten KW - nachhaltige Stadtentwicklung KW - Dichteeffekte KW - Innovationen in den Städten Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-555223 ER - TY - THES A1 - Gäbert, Chris T1 - Light-responsive polymer systems aiming towards programmable friction T1 - Lichtschaltbare Polymersysteme mit dem Ziel programmierbarer Reibung BT - the application driven development of 9-anthracene ester-terminated silicone oils and spiropyran graft copolymers as novel functional materials BT - die anwendungsorientierte Entwicklung von 9-Anthracenester-terminierten Silikonölen und Spiropyran-Pfropfcopolymeren als neuartige Funktionsmaterialien N2 - The development of novel programmable materials aiming to control friction in real-time holds potential to facilitate innovative lubrication solutions for reducing wear and energy losses. This work describes the integration of light-responsiveness into two lubricating materials, silicon oils and polymer brush surfaces. The first part focusses on the assessment on 9-anthracene ester-terminated polydimethylsiloxanes (PDMS-A) and, in particular, on the variability of rheological properties and the implications that arise with UV-light as external trigger. The applied rheometer setup contains an UV-transparent quartz-plate, which enables radiation and simultaneous measurement of the dynamic moduli. UV-A radiation (354 nm) triggers the cycloaddition reaction between the terminal functionalities of linear PDMS, resulting in chain extension. The newly-formed anthracene dimers cleave by UV-C radiation (254 nm) or at elevated temperatures (T > 130 °C). The sequential UV-A radiation and thermal reprogramming over three cycles demonstrate high conversions and reproducible programming of rheological properties. In contrast, the photochemical back reaction by UV-C is incomplete and can only partially restore the initial rheological properties. The dynamic moduli increase with each cycle in photochemical programming, presumably resulting from a chain segment re-arrangement as a result of the repeated partial photocleavage and subsequent chain length-dependent dimerization. In addition, long periods of radiation cause photooxidative degradation, which damages photo-responsive functions and consequently reduces the programming range. The absence of oxygen, however, reduces undesired side reactions. Anthracene-functionalized PDMS and native PDMS mix depending on the anthracene ester content and chain length, respectively, and allow fine-tuning of programmable rheological properties. The work shows the influence of mixing conditions during the photoprogramming step on the rheological properties, indicating that material property gradients induced by light attenuation along the beam have to be considered. Accordingly, thin lubricant films are suggested as potential application for light-programmable silicon fluids. The second part compares strategies for the grafting of spiropyran (SP) containing copolymer brushes from Si wafers and evaluates the light-responsiveness of the surfaces. Pre-experiments on the kinetics of the thermally initiated RAFT copolymerization of 2-hydroxyethyl acrylate (HEA) and spiropyran acrylate (SPA) in solution show, first, a strong retardation by SP and, second, the dependence of SPA polymerization on light. Surprisingly, the copolymerization of SPA is inhibited in the dark. These findings contribute to improve the synthesis of polar, spiropyran-containing copolymers. The comparison between initiator systems for the grafting-from approach indicates PET-RAFT superior to thermally initiated RAFT, suggesting a more efficient initiation of surface-bound CTA by light. Surface-initiated polymerization via PET-RAFT with an initiator system of EosinY (EoY) and ascorbic acid (AscA) facilitates copolymer synthesis from HEA and 5-25 mol% SPA. The resulting polymer film with a thickness of a few nanometers was detected by atomic force microscopy (AFM) and ellipsometry. Water contact angle (CA) measurements demonstrate photo-switchable surface polarity, which is attributed to the photoisomerization between non-polar spiropyran and zwitterionic merocyanine isomer. Furthermore, the obtained spiropyran brushes show potential for further studies on light-programmable properties. In this context, it would be interesting to investigate whether swollen spiropyran-containing polymers change their configuration and thus their film thickness under the influence of light. In addition, further experiments using an AFM or microtribometer should evaluate whether light-programmable solvation enables a change in frictional properties between polymer brush surfaces. N2 - Die Entwicklung neuartiger programmierbarer Materialien zur Anpassung von Reibung in Echtzeit birgt Potenzial, innovative Schmierungslösungen zu ermöglichen, um Verschleiß und Energieverluste zu reduzieren. Die vorliegende Arbeit beschreibt die Integration von Lichtlichtschaltbarkeit in zwei schmierende Materialien, Silikonöle und Oberflächen mit Polymerbürsten. Der erste Teil konzentriert sich auf die Bewertung von 9-Anthracenester-terminierten Polydimethylsiloxanen (PDMS-As) und insbesondere auf die Veränderbarkeit der rheologischen Eigenschaften sowie Implikationen, die sich bei der Verwendung von UV-Licht als externe Trigger ergeben. Der verwendete Rheometeraufbau enthält eine UV-transparente Quarzplatte, welche somit die Bestrahlung bei gleichzeitiger Messung der dynamischen Moduli ermöglicht. UV-A-Strahlung (354 nm) löst die Cycloadditionsreaktion zwischen den endständigen Funktionalitäten des linearen PDMS aus und führt so zu einer Kettenverlängerung. Die dabei gebildeten Anthracen-Dimere werden durch UV-C-Strahlung (254 nm) oder bei erhöhten Temperaturen (T > 130 °C) gespalten. Die sequentielle UV-A-Bestrahlung und thermische Reprogrammierung in drei Schaltzyklen führen zu hohen Umsätzen und zeigen reproduzierbar einstellbare Materialeigenschaften. Im Gegensatz dazu ist die photochemische Rückreaktion durch UV-C unvollständig und kann die ursprünglichen rheologischen Eigenschaften nur teilweise wiederherstellen. Die dynamischen Module nehmen mit jedem Zyklus der photochemischen Programmierung zu, was vermutlich auf eine Neuanordnung der Kettensegmente infolge der wiederholten partiellen Photospaltung und der anschließenden kettenlängenabhängigen Dimerisierung zurückzuführen ist. Darüber hinaus kommt es bei langer Bestrahlungsdauer zu einem photooxidativen Abbau, der die photoschaltbaren Funktionen des Silikons beeinträchtigt und folglich den Programmierbereich verringert. Der Ausschluss von Sauerstoff reduziert jedoch unerwünschte Nebenreaktionen. Anthracenfunktionalisiertes PDMS und unfunktionalisiertes PDMS mischen sich in Abhängigkeit vom Anthracenestergehalt beziehungsweise der Kettenlänge und ermöglichen die Feinabstimmung programmierbarer rheologischer Eigenschaften. Die Arbeit zeigt den Einfluss der Mischungsbedingungen während des Photoprogrammierungsschritts auf die rheologischen Eigenschaften, was darauf hindeutet, dass Materialeigenschaftsgradienten, die durch Lichtabschwächung entlang des Lichtstrahls entstehen, berücksichtigt werden müssen. Entsprechend werden dünne Schmiermittelfilme als mögliche Anwendung für lichtprogrammierbare Silikonöle vorgeschlagen. Der zweite Teil vergleicht ‚grafting-from‘-Methoden zur Synthese Spiropyran(SP)-haltiger Copolyme auf Si-Wafern und bewertet die Lichtschaltbarkeit der Oberflächeneigenschaften. Vorversuche zur Kinetik der thermisch initiierten RAFT-Copolymerisation von 2-Hydroxyethylacrylat (HEA) und Spiropyranacrylat (SPA) in Lösung zeigen erstens, eine starke Retardierung durch SP, und zweitens, die Lichtabhängigkeit der SPA-Polymerisation. Überraschenderweise ist die Copolymerisation von SPA im Dunkeln gehemmt. Diese Ergebnisse tragen dazu bei, die Synthese von polaren, spiropyranhaltigen Copolymeren zu verbessern. Der Vergleich zwischen Initiatorsystemen für den ‚grafting-from‘-Ansatz zeigt, dass PET-RAFT der thermisch initiierten RAFT überlegen ist, was auf eine effizientere Initiierung von oberflächengebundenem CTA durch Licht hindeutet. Die oberflächeninitierte Polymerisation via PET-RAFT mit einem Initiatorsystem aus EosinY (EoY) und Ascorbinsäure (AscA) ermöglicht die Copolymersynthese aus HEA und 5-25 mol% SPA. Der entstandene Polymerfilm mit einer Dicke von einigen Nanometern wurde mittels Rasterkraftmikroskopie (AFM) und Ellipsometrie nachgewiesen. Die Messungen des Wasserkontaktwinkels (CA) zeigt eine photoschaltbare Oberflächenpolarität, welche der Photoisomerisierung zwischen unpolaren Spiropyran und zwitterionischen Merocyanin-Isomer zugeschrieben wird. Darüber hinaus zeigen die erhaltenen Spiropyranbürsten Potenzial für weitere Untersuchungen zu lichtprogrammierbaren Eigenschaften. In diesem Zusammenhang wäre es interessant weiterführend zu untersuchen, ob gequollene spiropyranhaltige Polymere unter Lichteinfluss tatsächlich ihre Konfiguration und damit ihre Filmdicke ändern. Darüber hinaus wäre es sinnvoll, mit Hilfe eines AFM oder Mikrotribometers zu evaluieren, ob diese lichtprogrammierbare Solvatisierung eine Veränderung der Reibungseigenschaften zwischen Polymerbürstenoberflächen ermöglicht. KW - programmable friction KW - lubricant KW - light-programmable viscosity KW - spiropyran copolymer KW - grafting-from Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-553380 ER - TY - THES A1 - Fischer, Jens Walter T1 - Random dynamics in collective behavior - consensus, clustering & extinction of populations T1 - Stochastische Dynamiken in kollektivem Verhalten: Konsens, Gruppenbildung, Aussterben von Populationen N2 - The echo chamber model describes the development of groups in heterogeneous social networks. By heterogeneous social network we mean a set of individuals, each of whom represents exactly one opinion. The existing relationships between individuals can then be represented by a graph. The echo chamber model is a time-discrete model which, like a board game, is played in rounds. In each round, an existing relationship is randomly and uniformly selected from the network and the two connected individuals interact. If the opinions of the individuals involved are sufficiently similar, they continue to move closer together in their opinions, whereas in the case of opinions that are too far apart, they break off their relationship and one of the individuals seeks a new relationship. In this paper we examine the building blocks of this model. We start from the observation that changes in the structure of relationships in the network can be described by a system of interacting particles in a more abstract space. These reflections lead to the definition of a new abstract graph that encompasses all possible relational configurations of the social network. This provides us with the geometric understanding necessary to analyse the dynamic components of the echo chamber model in Part III. As a first step, in Part 7, we leave aside the opinions of the inidividuals and assume that the position of the edges changes with each move as described above, in order to obtain a basic understanding of the underlying dynamics. Using Markov chain theory, we find upper bounds on the speed of convergence of an associated Markov chain to its unique stationary distribution and show that there are mutually identifiable networks that are not apparent in the dynamics under analysis, in the sense that the stationary distribution of the associated Markov chain gives equal weight to these networks. In the reversible cases, we focus in particular on the explicit form of the stationary distribution as well as on the lower bounds of the Cheeger constant to describe the convergence speed. The final result of Section 8, based on absorbing Markov chains, shows that in a reduced version of the echo chamber model, a hierarchical structure of the number of conflicting relations can be identified. We can use this structure to determine an upper bound on the expected absorption time, using a quasi-stationary distribution. This hierarchy of structure also provides a bridge to classical theories of pure death processes. We conclude by showing how future research can exploit this link and by discussing the importance of the results as building blocks for a full theoretical understanding of the echo chamber model. Finally, Part IV presents a published paper on the birth-death process with partial catastrophe. The paper is based on the explicit calculation of the first moment of a catastrophe. This first part is entirely based on an analytical approach to second degree recurrences with linear coefficients. The convergence to 0 of the resulting sequence as well as the speed of convergence are proved. On the other hand, the determination of the upper bounds of the expected value of the population size as well as its variance and the difference between the determined upper bound and the actual value of the expected value. For these results we use almost exclusively the theory of ordinary nonlinear differential equations. N2 - Beziehungen und damit Interaktion sowie Diskussion, aber auch Konflikt und Opposition bilden die Grundbausteine einer jeden Gesellschaft. Häufig wird Kommunikation als der übergreigende Begriff zur Beschreibung interner Strukturen einer Gesellschaft identifiziert. Dabei muss es sich aber nicht um eine Gesellschaft im Sinne von Nationen handeln, sondern kann auch schlicht eine Gruppe von Menschen umfassen, die miteinander strukturiert interagieren, beispielsweise, eine Gruppe von Angestellten, die an einem gemeinsamen Projekt arbeiten, oder die Mitglieder eines sozialen Netzwerks. In dieser Arbeit befassen wir uns mit der mathematischen Beschreibung solcher Prozesse innerhalb von Gruppen und Gesellschaften und legen dabei unseren Fokus auf die Bildung eines Konsens durch Interaktion aber auch die Konsequenzen von Konflikt und das potentielle Aussterben einer Population. Dabei werden zwei Modelle im Fokus des Interesses stehen: Das Echokammer Model sowie eine Erweiterung des Geburts-Todes Prozesses, die die Möglichkeit eines radikalen Abfalls der Populationsgr öße miteinschließt. Wir beginnen mit einer Einführung in Part I und teilen die verbleibende Arbeit in drei Teile auf, wobei sich die ersten beiden technischen Abschnitte, Part II und III, mit einer ausführlichen Analyse der Bausteine des Echokammer Models befassen und im dritten Abschnitt, in Part IV, der erweiterte Geburts- Todes Prozess untersucht wird. Dieser wird im Folgenden als Geburts-Todes Prozess mit teilweiser Katastrophe bezeichnet werden. Das Echokammer Model beschreibt die Entwicklung von Gruppen in zunächst heterogenen sozialen Netzwerken. Unter einem heterogenen sozialen Netzwerk verstehen wir dabei eine Menge von Individuen, von denen jedes exakt eine Meinungen vertritt. Meinungen werden vereinfacht durch Werte in [0, 1] modelliert. Bestehende Beziehungen unter den Individuen können dann durch einen Graphen dargestellt werden. Es handelt sich bei dem Echokammer Modell um ein zeit-diskretes Modell, das entsprechend, ähnlich einem Brettspiel, in Zügen abläuft. In jedem Zug wird zufällig gleichverteilt eine bestehende Beziehung aus dem Netzwerk ausgewählt und die beiden verbundenen Individuen interagieren. Dabei kann es zu zwei verschiedenen Interaktionen kommen. Sind die Meinungen der betroffenen Individuen hinreichend ähnlich, so nähern sie sich weiter in ihren Meinungen an, während sie im Fall von Meinungen, die zu weit von einander liegen, ihre Beziehung auflösen und sich eines der Individuen eine neue Beziehung sucht. 8 In dieser Arbeit untersuchen wir theoretisch die Bausteine dieses Modells. Dabei legen wir die Beobachtung zu Grunde, dass die Veränderungen der Beziehungsstruktur im Netzwerk durch einen System von interagierenden Partikeln auf einem abstrakteren Raum beschrieben werden kann. Dies erlaubt es insbesondere graphentheoretische überlegungen in die Analyse einfließen zu lassen. Diese überlegungen werden ausührlich in Part II diskutiert und führen zur Definition eines neuen, abstrahierten Graphens, der alle möglichen Beziehungskonfigurationen des sozialen Netzwerks umfasst. Dies erlaubt es uns einen ähnlichkeitsbegriff für Beziehungskonfigurationen auf Basis der benachbarten Knoten in besagtem Graphen zu definieren. Dies liefert uns das notwendige geometrische Verständnis um in Part III die dynamischen Komponenten des Echokammer models zu analysieren. Insbesondere fokusieren wir uns dabei auf die Dynamik der Kanten, für die bisher in der Literatur noch keine Ergebnisse existieren. Wir lassen zunächst in Abschnitt 7 die Meinungen der Individuen beiseite und nehmen an, dass die Position der Kanten sich in jedem Zug wie zuvor beschrieben ändert, um eine grundlegendes Verständnis der unterliegenden Dynamik zu erhalten. Unter der Verwendung der Theorie von Markovketten finden wir obere Schranken an die Konvergenzgeschwindigkeit einer assoziierten Markovkette gegen ihre eindeutige stationäre Verteilung und zeigen, dass es Netzwerke gibt, die miteinander identifizierbar und unter der analysierten Dynamik daheingehend ununterscheinbar sind, dass die stationäre Verteilung der assozierten Markovkette diesen Netzwerken dasselbe Gewicht zuordnet. Anschließend beweisen wir eine Reihe von quantitativen Resultaten, die sich insbesondere in Fällen, in denen die assozierte Markovkette reversibel ist, als berechenbar herausstellen. Insbesondere die explizite Form der stationären Verteilung sowie untere Schranken an die Cheeger Konstante zur Beschreibung der Konvergenzgeschwindigkeit stehen dabei im Fokus und werden ausführlich diskutiert. Nach dieser vertieften Analyse des reduzierten Modells, fügen wir die Meinungen unserer Betrachtung wieder hinzu. Das abschließende Result in Abschnitt 8, basierend auf absorbierenden Markovketten, liefert dann, dass in einer reduzierte Version des Echokammer Modells, in dem sich Individuen ähnlicher Meinung nicht annähern, eine hierarchische Struktur der Anzahl der konfliktreichen Beziehung identifiziert werden kann. Dies können wir ausnutzen, um eine obere Schranke an die erwartete Absorptionszeit, unter Zuhilfenahme einer quasi-stationären Verteilung, zu bestimmen. Diese hierarchische Struktur bildet außerdem eine Brücke zu klassischen Theorien von Geburts-Todes und, insbesondere, reinen Todes-Prozessen, für die eine reiche Literatur existiert. Wir zeigen abschließend auf, wie künftige Forschung diese Verbindung ausnutzen kann und diskutieren die Wichtigkeit der Ergbenisse als Bausteine eines vollständigen theoretischen Verständnisses des Echokammer Modells. Part IV stellt abschließend einen veröffentlichten Artikel vor, der sich dem Geburts- Todes Prozess mit teilweiser Katastrophe widmet. Besagter Artikel steht dabei auf zwei Säulen. Zum Einen der expliziten Berechnung des ersten Zeitpunkts einer Katastrophe, wenn die Population zu Beginn der Beobachtung von instabiler Größe ist. KW - Markov chains KW - graph theory KW - complex systems KW - interacting particle systems KW - Markovketten KW - komplexe Systeme KW - Graphentheorie KW - Systeme interagierender Partikel Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-553725 ER - TY - THES A1 - Farkas, Marton Pal T1 - Hydraulic fracturing in hard rock – numerical studies from laboratory to reservoir scale T1 - Hydraulische Brüche in Hartgestein - Numerische Studien vom Labor- bis zum Reservoirmaßstab N2 - Hydraulic-driven fractures play a key role in subsurface energy technologies across several scales. By injecting fluid at high hydraulic pressure into rock with intrinsic low permeability, in-situ stress field and fracture development pattern can be characterised as well as rock permeability can be enhanced. Hydraulic fracturing is a commercial standard procedure for enhanced oil and gas production of rock reservoirs with low permeability in petroleum industry. However, in EGS utilization, a major geological concern is the unsolicited generation of earthquakes due to fault reactivation, referred to as induced seismicity, with a magnitude large enough to be felt on the surface or to damage facilities and buildings. Furthermore, reliable interpretation of hydraulic fracturing tests for stress measurement is a great challenge for the energy technologies. Therefore, in this cumulative doctoral thesis the following research questions are investigated. (1): How do hydraulic fractures grow in hard rock at various scales?; (2): Which parameters control hydraulic fracturing and hydro-mechanical coupling?; and (3): How can hydraulic fracturing in hard rock be modelled? In the laboratory scale study, several laboratory hydraulic fracturing experiments are investigated numerically using Irazu2D that were performed on intact cubic Pocheon granite samples from South Korea applying different injection protocols. The goal of the laboratory experiments is to test the concept of cyclic soft stimulation which may enable sustainable permeability enhancement (Publication 1). In the borehole scale study, hydraulic fracturing tests are reported that were performed in boreholes located in central Hungary to determine the in-situ stress for a geological site investigation. At depth of about 540 m, the recorded pressure versus time curves in mica schist with low dip angle foliation show atypical evolution. In order to provide explanation for this observation, a series of discrete element computations using Particle Flow Code 2D are performed (Publication 2). In the reservoir scale study, the hydro-mechanical behaviour of fractured crystalline rock due to one of the five hydraulic stimulations at the Pohang Enhanced Geothermal site in South Korea is studied. Fluid pressure perturbation at faults of several hundred-meter lengths during hydraulic stimulation is simulated using FracMan (Publication 3). The doctoral research shows that the resulting hydraulic fracturing geometry will depend “locally”, i.e. at the length scale of representative elementary volume (REV) and below that (sub-REV), on the geometry and strength of natural fractures, and “globally”, i.e. at super-REV domain volume, on far-field stresses. Regarding hydro-mechanical coupling, it is suggested to define separate coupling relationship for intact rock mass and natural fractures. Furthermore, the relative importance of parameters affecting the magnitude of formation breakdown pressure, a parameter characterising hydro-mechanical coupling, is defined. It can be also concluded that there is a clear gap between the capacity of the simulation software and the complexity of the studied problems. Therefore, the computational time of the simulation of complex hydraulic fracture geometries must be reduced while maintaining high fidelity simulation results. This can be achieved either by extending the computational resources via parallelization techniques or using time scaling techniques. The ongoing development of used numerical models focuses on tackling these methodological challenges. N2 - Hydraulische Risserzeugung (aus dem Englischen „Hydraulic Fracturing“; auch hydraulische Stimulation genannt) spielt eine Schlüsselrolle in unterirdischen Energietechnologien auf verschiedenen Skalen. Durch Injektion von Flüssigkeit mit hohem hydraulischem Druck im Gestein mit geringer Permeabilität können das Spannungsfeld und das Bruchentwicklungsmuster in-situ charakterisiert sowie die Gesteinspermeabilität erhöht werden. Hydraulic Fracturing ist ein kommerzielles Standardverfahren zur verbesserten Öl- und Gasförderung aus geringpermeablen Gesteinsformationen in der Erdölindustrie. Ein großes geologisches Problem bei der geothermischen Nutzung ist die ungewollte Erzeugung von Erdbeben aufgrund einer Verwerfungsreaktivierung, die als induzierte Seismizität bezeichnet wird und eine Größenordnung hat, die groß genug ist, dass sie an der Oberfläche zu spüren ist und sogar Gebäude beschädigen kann. Darüber hinaus ist die zuverlässige Interpretation von Hydraulic-Fracturing-Tests zur Spannungsmessung eine große Herausforderung für die Energietechnologien. Daher werden in dieser kumulativen Dissertation folgende Forschungsfragen untersucht: (1): Wie wachsen hydraulische Risse in Hartgestein in verschiedenen Skalen? (2): Welche Parameter steuern das hydraulische Versagen und die hydromechanische Kopplung? und (3): Wie kann hydraulische Risserzeugung in Hartgestein modelliert werden? In der Studie im Labormaßstab werden mehrere Hydrofracturing-Laborexperimente numerisch mit Irazu2D untersucht, die an intakten kubischen Pocheon-Granitproben aus Südkorea unter Anwendung verschiedener Injektionsprotokolle durchgeführt wurden. Das Ziel der Laborexperimente ist es, das Konzept der zyklischen sanften Stimulation zu testen, die eine nachhaltige Permeabilitätserhöhung ermöglichen kann (Veröffentlichung 1). Die Studie im Bohrlochmaßstab untersucht Hydraulic Fracturing Tests, die in Bohrlöchern in Mittel-Ungarn durchgeführt wurden, um das in-situ Spannungsfeld für eine geologische Standortuntersuchung zu bestimmen. In einer Tiefe von etwa 540 m zeigen die aufgezeichneten Druck-Zeit-Kurven im Glimmerschiefer mit einer Schieferung mit geringem Neigungswinkel eine atypische Entwicklung. Um diese Beobachtung zu erklären, wird eine Reihe von diskreten Elementberechnungen unter Verwendung von Particle Flow Code 2D durchgeführt (Veröffentlichung 2). In der Studie im Reservoirmaßstab wird das hydromechanische Verhalten des aufgebrochenen kristallinen Gesteins an einer der fünf hydraulischen Stimulationen am Pohang Enhanced Geothermal System (EGS) Standort in Südkorea untersucht. Mit FracMan wird die Fluiddruckstörung an Verwerfungen von mehreren hundert Metern Länge während der hydraulischen Stimulation simuliert (Veröffentlichung 3). Die Ergebnisse dieser Dissertation zeigen, dass die resultierende hydraulische Bruchgeometrie „lokal“, d. h. auf der Längenskala des repräsentativen Elementarvolumens (REV) und darunter (sub-REV) von der Geometrie und Stärke natürlicher Risse und „global“, d.h. bei Super-REV-Domänenvolumen, vom Spannungsfeld abhängt. In Bezug auf die hydromechanische Kopplung wird vorgeschlagen, separate Kopplungsbeziehungen für intakte Gesteinsmassen und natürliche Risse zu definieren. Darüber hinaus wird die relative Bedeutung von Parametern definiert, die die Größe des Formationsbruchdrucks beeinflussen, ein Parameter, der die hydromechanische Kopplung charakterisiert. Es kann auch festgestellt werden, dass es eine klare Lücke zwischen der Leistungsfähigkeit der Simulationssoftware und der Komplexität der untersuchten Probleme gibt. Daher muss die Rechenzeit der Simulation komplexer hydraulischer Rissgeometrien reduziert werden, währenddessen die Simulationsergebnisse mit hoher Genauigkeit beibehalten werden. Dies kann entweder durch Erweiterung der Rechenressourcen über Parallelisierungstechniken oder durch Verwendung von Zeitskalierungstechniken erreicht werden. Die Weiterentwicklung der verwendeten numerischen Modelle konzentriert sich auf die Bewältigung dieser methodischen Herausforderungen. KW - hydraulic fracturing KW - enhanced geothermal system KW - stress measurement KW - numerical modelling KW - hydraulische Risserzeugung KW - petrothermales System (EGS) KW - Spannungsmessung KW - numerische Modellierung Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-549343 ER - TY - JOUR A1 - Zurell, Damaris A1 - König, Christian A1 - Malchow, Anne-Kathleen A1 - Kapitza, Simon A1 - Bocedi, Greta A1 - Travis, Justin M. J. A1 - Fandos, Guillermo T1 - Spatially explicit models for decision-making in animal conservation and restoration JF - Ecography : pattern and diversity in ecology / Nordic Ecologic Society Oikos N2 - Models are useful tools for understanding and predicting ecological patterns and processes. Under ongoing climate and biodiversity change, they can greatly facilitate decision-making in conservation and restoration and help designing adequate management strategies for an uncertain future. Here, we review the use of spatially explicit models for decision support and to identify key gaps in current modelling in conservation and restoration. Of 650 reviewed publications, 217 publications had a clear management application and were included in our quantitative analyses. Overall, modelling studies were biased towards static models (79%), towards the species and population level (80%) and towards conservation (rather than restoration) applications (71%). Correlative niche models were the most widely used model type. Dynamic models as well as the gene-to-individual level and the community-to-ecosystem level were underrepresented, and explicit cost optimisation approaches were only used in 10% of the studies. We present a new model typology for selecting models for animal conservation and restoration, characterising model types according to organisational levels, biological processes of interest and desired management applications. This typology will help to more closely link models to management goals. Additionally, future efforts need to overcome important challenges related to data integration, model integration and decision-making. We conclude with five key recommendations, suggesting that wider usage of spatially explicit models for decision support can be achieved by 1) developing a toolbox with multiple, easier-to-use methods, 2) improving calibration and validation of dynamic modelling approaches and 3) developing best-practise guidelines for applying these models. Further, more robust decision-making can be achieved by 4) combining multiple modelling approaches to assess uncertainty, and 5) placing models at the core of adaptive management. These efforts must be accompanied by long-term funding for modelling and monitoring, and improved communication between research and practise to ensure optimal conservation and restoration outcomes. KW - adaptive management KW - biodiversity conservation KW - cost optimisation KW - ecosystem restoration KW - global change KW - predictive models Y1 - 2021 U6 - https://doi.org/10.1111/ecog.05787 SN - 1600-0587 IS - 4 SP - 1 EP - 16 PB - Wiley-Blackwell CY - Oxford ER - TY - THES A1 - Neuharth, Derek T1 - Evolution of divergent and strike-slip boundaries in response to surface processes T1 - Die Entwicklung divergenter und transversaler Plattengrenzen unter dem Einfluss von Erdoberflächenprozessen N2 - Plate tectonics describes the movement of rigid plates at the surface of the Earth as well as their complex deformation at three types of plate boundaries: 1) divergent boundaries such as rift zones and mid-ocean ridges, 2) strike-slip boundaries where plates grind past each other, such as the San Andreas Fault, and 3) convergent boundaries that form large mountain ranges like the Andes. The generally narrow deformation zones that bound the plates exhibit complex strain patterns that evolve through time. During this evolution, plate boundary deformation is driven by tectonic forces arising from Earth’s deep interior and from within the lithosphere, but also by surface processes, which erode topographic highs and deposit the resulting sediment into regions of low elevation. Through the combination of these factors, the surface of the Earth evolves in a highly dynamic way with several feedback mechanisms. At divergent boundaries, for example, tensional stresses thin the lithosphere, forcing uplift and subsequent erosion of rift flanks, which creates a sediment source. Meanwhile, the rift center subsides and becomes a topographic low where sediments accumulate. This mass transfer from foot- to hanging wall plays an important role during rifting, as it prolongs the activity of individual normal faults. When rifting continues, continents are eventually split apart, exhuming Earth’s mantle and creating new oceanic crust. Because of the complex interplay between deep tectonic forces that shape plate boundaries and mass redistribution at the Earth’s surface, it is vital to understand feedbacks between the two domains and how they shape our planet. In this study I aim to provide insight on two primary questions: 1) How do divergent and strike-slip plate boundaries evolve? 2) How is this evolution, on a large temporal scale and a smaller structural scale, affected by the alteration of the surface through erosion and deposition? This is done in three chapters that examine the evolution of divergent and strike-slip plate boundaries using numerical models. Chapter 2 takes a detailed look at the evolution of rift systems using two-dimensional models. Specifically, I extract faults from a range of rift models and correlate them through time to examine how fault networks evolve in space and time. By implementing a two-way coupling between the geodynamic code ASPECT and landscape evolution code FastScape, I investigate how the fault network and rift evolution are influenced by the system’s erosional efficiency, which represents many factors like lithology or climate. In Chapter 3, I examine rift evolution from a three-dimensional perspective. In this chapter I study linkage modes for offset rifts to determine when fast-rotating plate-boundary structures known as continental microplates form. Chapter 4 uses the two-way numerical coupling between tectonics and landscape evolution to investigate how a strike-slip boundary responds to large sediment loads, and whether this is sufficient to form an entirely new type of flexural strike-slip basin. N2 - Plattentektonik beschreibt die Bewegung starrer tektonischer Platten an der Erdoberfläche sowie deren komplexe Deformation an drei Arten von Plattengrenzen: 1) divergenten Grenzen wie Grabenbrüchen und mittelozeanische Rücken, 2) transversalen Grenzen, an denen Platten gegeneinander verschoben werden, wie die San-Andreas-Verwerfung, und 3) konvergenten Grenzen, die große Gebirgszüge wie die Anden bilden. Diese schmalen Deformationszonen, die Platten begrenzen, weisen meist komplexe Dehnungsmuster auf, die sich im Laufe der Zeit entwickeln. Während dieser Entwicklung wird die Verformung der Plattengrenzen durch tektonische Kräfte aus dem tiefen Erdinneren und der Lithosphäre, aber auch durch Oberflächenprozesse, welche topografische Erhebungen erodieren und die daraus resultierenden Sedimente in tiefer gelegenen Gebieten ablagern, angetrieben. Durch das Zusammenwirken und die Rückkopplung dieser Faktoren entwickelt sich die Erdoberfläche in einer extrem dynamischen Art und Weise. An divergenten Grenzen beispielsweise dünnen Zugspannungen die Lithosphäre aus, was zu einer Hebung und anschließenden Erosion der Flanken eines Grabenbruchs führt, wobei wiederum Sedimente freigesetzt werden. Währenddessen sinkt das Zentrum des Grabens ab und wird zu einer topografischen Senke, in der sich Sedimente ablagern. Diese Massenumverteilung vom Fuß zum Hang einer Verwerfung spielt eine wichtige Rolle, da er die Aktivität einzelner Verwerfungen verlängert. Durch anhaltende Divergenz werden Kontinente schließlich auseinandergerissen, wodurch der Erdmantel an die Erdoberfläche gefördert und neue ozeanische Kruste gebildet wird. Aufgrund des komplexen Zusammenspiels zwischen tektonischen Kräften aus dem tiefen Erdinneren und der Massenumverteilung an der Erdoberfläche ist es von entscheidender Bedeutung, die Rückkopplungen zwischen diesen beiden Bereichen zu verstehen. In dieser Studie möchte ich Einblicke zu zwei Hauptfragen geben: 1) Wie entwickeln sich divergierende Plattengrenzen? 2) Wie wird diese Entwicklung auf einer großen zeitlichen und einer kleinen strukturellen Skala durch die Veränderung der Oberfläche durch Erosion und Sedimentation beeinflusst? In drei Kapiteln untersuche ich die Entwicklung von divergenten und streichenden Plattengrenzen anhand numerischer Modelle. In Kapitel 2 wird die Entwicklung von Grabenbrüchen anhand zweidimensionaler Modelle im Detail erforscht. Dabei extrahiere ich Verwerfungen aus einer Reihe von Modellen und korreliere sie über die Zeit, um zu untersuchen, wie sich Verwerfungsnetzwerke räumlich und zeitlich entwickeln. Durch die bidirektionale Kopplung des Geodynamik-Codes ASPECT und des Erdoberflächen-Codes FastScape untersuche ich, wie diese Verwerfungsnetzwerk und der Grabenbruch im Allgemeinen durch die Erosionseffizienz des Systems, welche viele Faktoren wie Lithologie oder Klima abbildet, beeinflusst werden. In Kapitel 3 untersuche ich die Entwicklung eines Grabenbruchs aus einer dreidimensionalen Perspektive. In diesem Kapitel analysiere ich wie sich gegeneinander versetzte Grabenbrüche verbinden und wann sich dabei schnell rotierende kontinentale Mikroplatten bilden. In Kapitel 4 nutze ich die entwickelte bidirektionale Kopplung zwischen Geodynamik und Erdoberflächenprozessen, um zu verstehen, wie transversale Plattengrenzen auf Sedimentlasten reagieren und ob die ausreicht, um einen völlig neue Art von Sedimentbecken in dieser Umgebung zu formen. KW - geodynamics KW - numerical modelling KW - rift KW - strike-slip KW - surface processes KW - microplate KW - FastScape KW - ASPECT KW - ASPECT KW - FastScape KW - Geodynamik KW - Mikroplatte KW - numerische Modellierung KW - Rift KW - Blattverschiebung KW - Oberflächenprozesse Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-549403 ER - TY - THES A1 - Rodriguez Piceda, Constanza T1 - Thermomechanical state of the southern Central Andes T1 - Thermomechanischer Zustand der südlichen Zentral Anden BT - implications for active deformation patterns in the transition from flat to steep subduction BT - Implikationen für aktive Deformationsmuster beim Übergang von flacher zu steiler Subduktion N2 - The Andes are a ~7000 km long N-S trending mountain range developed along the South American western continental margin. Driven by the subduction of the oceanic Nazca plate beneath the continental South American plate, the formation of the northern and central parts of the orogen is a type case for a non-collisional orogeny. In the southern Central Andes (SCA, 29°S-39°S), the oceanic plate changes the subduction angle between 33°S and 35°S from almost horizontal (< 5° dip) in the north to a steeper angle (~30° dip) in the south. This sector of the Andes also displays remarkable along- and across- strike variations of the tectonic deformation patterns. These include a systematic decrease of topographic elevation, of crustal shortening and foreland and orogenic width, as well as an alternation of the foreland deformation style between thick-skinned and thin-skinned recorded along- and across the strike of the subduction zone. Moreover, the SCA are a very seismically active region. The continental plate is characterized by a relatively shallow seismicity (< 30 km depth) which is mainly focussed at the transition from the orogen to the lowland areas of the foreland and the forearc; in contrast, deeper seismicity occurs below the interiors of the northern foreland. Additionally, frequent seismicity is also recorded in the shallow parts of the oceanic plate and in a sector of the flat slab segment between 31°S and 33°S. The observed spatial heterogeneity in tectonic and seismic deformation in the SCA has been attributed to multiple causes, including variations in sediment thickness, the presence of inherited structures and changes in the subduction angle of the oceanic slab. However, there is no study that inquired the relationship between the long-term rheological configuration of the SCA and the spatial deformation patterns. Moreover, the effects of the density and thickness configuration of the continental plate and of variations in the slab dip angle in the rheological state of the lithosphere have been not thoroughly investigated yet. Since rheology depends on composition, pressure and temperature, a detailed characterization of the compositional, structural and thermal fields of the lithosphere is needed. Therefore, by using multiple geophysical approaches and data sources, I constructed the following 3D models of the SCA lithosphere: (i) a seismically-constrained structural and density model that was tested against the gravity field; (ii) a thermal model integrating the conversion of mantle shear-wave velocities to temperature with steady-state conductive calculations in the uppermost lithosphere (< 50 km depth), validated by temperature and heat-flow measurements; and (iii) a rheological model of the long-term lithospheric strength using as input the previously-generated models. The results of this dissertation indicate that the present-day thermal and rheological fields of the SCA are controlled by different mechanisms at different depths. At shallow depths (< 50 km), the thermomechanical field is modulated by the heterogeneous composition of the continental lithosphere. The overprint of the oceanic slab is detectable where the oceanic plate is shallow (< 85 km depth) and the radiogenic crust is thin, resulting in overall lower temperatures and higher strength compared to regions where the slab is steep and the radiogenic crust is thick. At depths > 50 km, largest temperatures variations occur where the descending slab is detected, which implies that the deep thermal field is mainly affected by the slab dip geometry. The outcomes of this thesis suggests that long-term thermomechanical state of the lithosphere influences the spatial distribution of seismic deformation. Most of the seismicity within the continental plate occurs above the modelled transition from brittle to ductile conditions. Additionally, there is a spatial correlation between the location of these events and the transition from the mechanically strong domains of the forearc and foreland to the weak domain of the orogen. In contrast, seismicity within the oceanic plate is also detected where long-term ductile conditions are expected. I therefore analysed the possible influence of additional mechanisms triggering these earthquakes, including the compaction of sediments in the subduction interface and dehydration reactions in the slab. To that aim, I carried out a qualitative analysis of the state of hydration in the mantle using the ratio between compressional- and shear-wave velocity (vp/vs ratio) from a previous seismic tomography. The results from this analysis indicate that the majority of the seismicity spatially correlates with hydrated areas of the slab and overlying continental mantle, with the exception of the cluster within the flat slab segment. In this region, earthquakes are likely triggered by flexural processes where the slab changes from a flat to a steep subduction angle. First-order variations in the observed tectonic patterns also seem to be influenced by the thermomechanical configuration of the lithosphere. The mechanically strong domains of the forearc and foreland, due to their resistance to deformation, display smaller amounts of shortening than the relatively weak orogenic domain. In addition, the structural and thermomechanical characteristics modelled in this dissertation confirm previous analyses from geodynamic models pointing to the control of the observed heterogeneities in the orogen and foreland deformation style. These characteristics include the lithospheric and crustal thickness, the presence of weak sediments and the variations in gravitational potential energy. Specific conditions occur in the cold and strong northern foreland, which is characterized by active seismicity and thick-skinned structures, although the modelled crustal strength exceeds the typical values of externally-applied tectonic stresses. The additional mechanisms that could explain the strain localization in a region that should resist deformation are: (i) increased tectonic forces coming from the steepening of the slab and (ii) enhanced weakening along inherited structures from pre-Andean deformation events. Finally, the thermomechanical conditions of this sector of the foreland could be a key factor influencing the preservation of the flat subduction angle at these latitudes of the SCA. N2 - Die Anden sind eine ~7000 km lange N-S-verlaufende Hochgebirgskette, die entlang des westlichen südamerikanischen Kontinentalrandes entstanden ist. Aufgrund der Subduktion der ozeanischen Nazca-Platte unter die kontinentale südamerikanische Platte ist die Bildung des nördlichen und zentralen Teils des Gebirges typisch für eine nicht-kollisionale Orogenese. In den südlichen Zentralanden (SZA, 29-39° S) verändert sich der Subduktionswinkel der ozeanischen Platte zwischen 33 ° S und 35 ° S von fast horizontal (< 5° Einfallen) im Norden zu einem steileren Winkel (~ 30 ° Einfallen) im Süden. Begleitet wird dieser Trend von systematischen, Süd-gerichteten Abnahmen der topographischen Erhebung, der Krusteneinengung und der Vorland- und Orogenbreite, sowie von Variationen im Deformationsstil des Vorlandes, wo die Einengung des Deckgebirges in unterschiedlichem Maße von einer entsprechenden Deformation des Grundgebirges begleitet wird. . Darüber hinaus sind die SZA eine seismisch sehr aktive Region. Die Kontinentalplatte zeichnet sich durch eine relativ flache Seismizität (< 30 km Tiefe) aus, die sich hauptsächlich auf die Übergänge vom Orogen zu den Vorlandbereichen konzentriert; im Gegensatz dazu tritt tiefere Seismizität in den zentralen Bereichen des nördlichen Vorlandes auf. Darüber hinaus ist häufig auftretende Seismizität auch in den flachen Teilen der ozeanischen Platte und im Plattensegment mit flach einfallender Subduktion zwischen 31 ° S und 33 ° S festzustellen. Die beobachtete räumliche Heterogenität der tektonischen und seismischen Deformation in den SZA wurde auf mehrere Ursachen zurückgeführt, darunter Schwankungen der Sedimentmächtigkeit, das Vorhandensein vererbter Strukturen und Veränderungen des Subduktionswinkels der ozeanischen Platte. Es gibt jedoch bislang keine Studie, die den Zusammenhang zwischen der langfristigen rheologischen Konfiguration der SZA und den räumlichen Deformationsmustern untersucht hat. Darüber hinaus wurden die Auswirkungen der Dichte- und Mächtigkeitsvariationen in der kontinentalen Oberplatte und der verschiedenen Subduktionswinkel auf den rheologischen Zustand der Lithosphäre noch nicht grundlegend untersucht. Da die Rheologie von der Gesteinsart, dem Druck und der Temperatur abhängt, ist eine detaillierte Charakterisierung der Zusammensetzung, Struktur und des thermischen Feldes der Lithosphäre erforderlich. Daher habe ich unter Verwendung kombinierter Modellierungsansätze und geophysikalischer Daten die folgenden 3D Modelle für die Lithosphäre der SZA konstruiert: (i) ein auf seismischen Daten basierendes Struktur- und Dichtemodell, das anhand des beobachteten Schwerefeldes validiert wurde; (ii) ein thermisches Modell, das die Umwandlung von Mantelscherwellengeschwindigkeiten in Temperaturen mit Berechnungen des konduktiven Wärmetransports für stationäre Bedingungen in der obersten Lithosphäre (<50 km Tiefe) integriert und durch Temperatur- und Wärmeflussmessungen validiert wurde; und (iii) ein rheologisches Modell der langfristig bedingten Lithosphärenfestigkeit, das auf den zuvor erzeugten Modellen gründet. Die Ergebnisse dieser Dissertation zeigen, dass die thermischen und rheologischen Bedingungen in den heutigen SZA durch verschiedene Mechanismen in unterschiedlichen Tiefen gesteuert werden. In flachen Tiefen (< 50 km) wird das thermomechanische Feld durch die heterogene Zusammensetzung der kontinentalen Lithosphäre differenziert. Eine Überprägung durch die ozeanische Platte ist dort nachweisbar, wo die ozeanische Platte flach (< 85 km tief) und die radiogene Kruste dünn ist, was insgesamt zu niedrigeren Temperaturen und einer höheren Festigkeit im Vergleich zu Bereichen führt, in denen die Platte steil einfällt und die radiogene Kruste dick ist. In Tiefen > 50 km treten die größten Temperaturschwankungen dort auf, wo die subduzierten Platte nachgewiesen wurde, was bedeutet, dass das tiefe thermische Feld den Subduktionswinkel gesteuert wird. Die Ergebnisse dieser Doktorarbeit legen nahe, dass der langfristige thermomechanische Zustand der Lithosphäre die räumliche Verteilung rezenter Seismizität beeinflusst. Der größte Anteil innerhalb der Kontinentalplatte registrierter Erdbebentätigkeit tritt oberhalb des modellierten Übergangs von spröden zu duktilen Bedingungen auf. Außerdem besteht eine räumliche Korrelation zwischen Erdbebenclustern und den Übergängen von den mechanisch rigideren Vorlandbereichen (Forearc und Foreland) zum mechanisch schwächeren Orogen. Demgegenüber wird vermehrte Seismizität innerhalb der ozeanischen Platte auch dort nachgewiesen, wo entsprechend der Modellierung langfristig duktile Bedingungen erwartet werden. Ich habe daher den möglichen Einfluss zusätzlicher Mechanismen untersucht, die ein Auslösen dieser Erdbeben begünstigen könnten, darunter die Kompaktion von Sedimenten an der Subduktionsgrenzfläche und Dehydrationsreaktionen innerhalb der Platte. Dazu habe ich eine qualitative Analyse des Hydratationszustandes des Mantels unter Verwendung des Verhältnisses zwischen Kompressions- und Scherwellengeschwindigkeit (Vp/Vs-Verhältnis aus einemseismischen Tomographiemodell) durchgeführt. Die Ergebnisse dieser Analyse zeigen, dass der Großteil der Seismizität räumlich mit hydratisierten Bereichen in der subduzierten Platte und im darüber liegenden kontinentalen Mantel korreliert, mit Ausnahme eines Erdbebenclusters, das innerhalb des flachen Plattensegments auftritt. In diesem Bereich wechselt die subduzierte Platte von einem flachen in einen steilen Subduktionswinkel und Erdbeben werden wahrscheinlich durch Biegevorgänge in der Platte ausgelöst. Auch die wichtigsten Variationen in den beobachteten tektonischen Mustern scheinen durch die thermomechanische Konfiguration der Lithosphäre beeinflusst zu sein. Die mechanisch starken Bereiche von Forearc und Foreland zeigen aufgrund ihrer Verformungsbeständigkeit geringere Verkürzungsraten als der relativ schwache Bereich des Orogens. Darüber hinaus bestätigen die in dieser Dissertation modellierten strukturellen und thermomechanischen Eigenschaften der Lithosphäre auch frühere Analysen geodynamischer Simulationen, denen zufolge der Deformationsstil im Orogen- und Vorlandbereich jeweils von Variationen in der Lithosphären- und Krustendicke, im Vorhandensein schwacher Sedimente und in der gravitativen potentiellen Energie kontrolliert wird. Eine Sonderstellung nimmt der nordöstliche Vorlandbereich der SZA ein, wo eine verstärkte Seismizität und eine das Deck-und Grundgebirge erfassende Deformation zu beobachten sind, obwohl die modellierte Krustenfestigkeit dort Werte übersteigt, die für die in diesem Gebiet anzunehmenden tektonischen Spannungen typisch wären. . Mechanismen zur Lokalisierung verstärkter Deformation in einem Gebiet beitragen können, das nach den vorliegenden Modellen einer tektonischen Verformung widerstehen sollte, sind: (i) erhöhte tektonische Kräfte durch ein steileres Abtauchen der Platte und (ii) Schwächezonen in der Kruste, die auf prä-andine Deformationsereignisse zurückgehen. Schließlich könnten die thermomechanischen Bedingungen in diesem Teil des Vorlands einchlüsselfaktor für die Erhaltung des flachen Subduktionswinkels in diesen Breiten der SZA sein. KW - Andes KW - Anden KW - subduction KW - Subduktion KW - lithosphere KW - Lithosphäre KW - earthquakes KW - Erdbeben KW - modelling KW - Modellierung Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-549275 ER -