TY - THES A1 - Rinne, Theresa Charlotte T1 - The effects of nutrients on bone stem cell function and regeneration N2 - Aging is associated with bone loss, which can lead to osteoporosis and high fracture risk. This coincides with the enhanced formation of bone marrow adipose tissue (BMAT), suggesting a negative effect of bone marrow adipocytes on skeletal health. Increased BMAT formation is also observed in pathologies such as obesity, type 2 diabetes and osteoporosis. However, a subset of bone marrow adipocytes forming the constitutive BMAT (cBMAT), arise early in life in the distal skeleton, contain high levels of unsaturated fatty acids and are thought to provide a physiological function. Regulated BMAT (rBMAT) forms during aging and obesity in proximal regions of the bone and contain a large proportion of saturated fatty acids. Paradoxically, BMAT accumulation is also enhanced during caloric restriction (CR), a life-span extending dietary intervention. This indicates, that different types of BMAT can form in response to opposing nutritional stimuli with potentially different functions. To this end, two types of nutritional interventions, CR and high fat diet (HFD), that are both described to induce BMAT accumulation were carried out. CR markedly increased BMAT formation in the proximal tibia and led to a higher proportion of unsaturated fatty acids, making it similar to the physiological cBMAT. Additionally, proximal and diaphyseal tibia regions displayed higher adiponectin expression. In aged mice, CR was associated with an improved trabecular bone structure. Taken together, these findings demonstrate, that the type of BMAT that forms during CR might provide beneficial effects for local bone stem/progenitor cells and metabolic health. The HFD intervention performed in this thesis showed no effect on BMAT accumulation and bone microstructure. RNA Seq analysis revealed alterations in the composition of the collagen-containing extracellular matrix (ECM). In order to investigate the effects of glucose homeostasis on osteogenesis, differentiation capacity of immortalized multipotent mesenchymal stromal cells (MSCs) and osteochondrogenic progenitor cells (OPCs) was analyzed. Insulin improved differentiation in both cell types, however, combination of with a high glucose concentration led to an impaired mineralization of the ECM. In the MSCs, this was accompanied by the formation of adipocytes, indicating negative effects of the adipocytes formed during hyperglycemic conditions on mineralization processes. However, the altered mineralization pattern and structure of the ECM was also observed in OPCs, which did not form any adipocytes, suggesting further negative effects of a hyperglycemic environment on osteogenic differentiation. In summary, the work provided in this thesis demonstrated that differentiation commitment of bone-resident stem cells can be altered through nutrient availability, specifically glucose. Surprisingly, both high nutrient supply, e.g. the hyperglycemic cell culture conditions, and low nutrient supply, e.g. CR, can induce adipogenic differentiation. However, while CR-induced adipocyte formation was associated with improved trabecular bone structure, adipocyte formation in a hyperglycemic cell-culture environment hampered mineralization. This thesis provides further evidence for the existence of different types of BMAT with specific functions. Y1 - 2024 ER - TY - THES A1 - Kiss, Andrea T1 - Moss-associated bacterial and archaeal communities of northern peatlands: key taxa, environmental drivers and potential functions T1 - Moos-assoziierte bakterielle und archaelle Gemeinschaften nördlicher Moore: Schlüsselspezies, beeinflussende Umweltfaktoren und potentielle Funktionen N2 - Moss-microbe associations are often characterised by syntrophic interactions between the microorganisms and their hosts, but the structure of the microbial consortia and their role in peatland development remain unknown. In order to study microbial communities of dominant peatland mosses, Sphagnum and brown mosses, and the respective environmental drivers, four study sites representing different successional stages of natural northern peatlands were chosen on a large geographical scale: two brown moss-dominated, circumneutral peatlands from the Arctic and two Sphagnum-dominated, acidic peat bogs from subarctic and temperate zones. The family Acetobacteraceae represented the dominant bacterial taxon of Sphagnum mosses from various geographical origins and displayed an integral part of the moss core community. This core community was shared among all investigated bryophytes and consisted of few but highly abundant prokaryotes, of which many appear as endophytes of Sphagnum mosses. Moreover, brown mosses and Sphagnum mosses represent habitats for archaea which were not studied in association with peatland mosses so far. Euryarchaeota that are capable of methane production (methanogens) displayed the majority of the moss-associated archaeal communities. Moss-associated methanogenesis was detected for the first time, but it was mostly negligible under laboratory conditions. Contrarily, substantial moss-associated methane oxidation was measured on both, brown mosses and Sphagnum mosses, supporting that methanotrophic bacteria as part of the moss microbiome may contribute to the reduction of methane emissions from pristine and rewetted peatlands of the northern hemisphere. Among the investigated abiotic and biotic environmental parameters, the peatland type and the host moss taxon were identified to have a major impact on the structure of moss-associated bacterial communities, contrarily to archaeal communities whose structures were similar among the investigated bryophytes. For the first time it was shown that different bog development stages harbour distinct bacterial communities, while at the same time a small core community is shared among all investigated bryophytes independent of geography and peatland type. The present thesis displays the first large-scale, systematic assessment of bacterial and archaeal communities associated both with brown mosses and Sphagnum mosses. It suggests that some host-specific moss taxa have the potential to play a key role in host moss establishment and peatland development. N2 - Während die Beziehungen zwischen Moosen und den mit ihnen assoziierten Mikroorganismen oft durch syntrophische Wechselwirkungen charakterisiert sind, ist die Struktur der Moos-assoziierten mikrobiellen Gemeinschaften sowie deren Rolle bei der Entstehung von Mooren weitgehend unbekannt. Die vorliegende Arbeit befasst sich mit mikrobiellen Gemeinschaften, die mit Moosen nördlicher, naturnaher Moore assoziiert sind, sowie mit den Umweltfaktoren, die sie beeinflussen. Entlang eines groß angelegten geographischen Gradienten, der von der Hocharktis bis zur gemäßigten Klimazone reicht, wurden vier naturbelassene Moore als Probenstandorte ausgesucht, die stellvertretend für verschiedene Stadien der Moorentwicklung stehen: zwei Braunmoos-dominierte Niedermoore mit nahezu neutralem pH-Wert sowie zwei Sphagnum-dominierte Torfmoore mit saurem pH-Wert. Die Ergebnisse der vorliegenden Arbeit machen deutlich, dass die zu den Bakterien zählenden Acetobacteraceae das vorherrschende mikrobielle Taxon der Sphagnum-Moose gleich welchen geographischen Ursprungs darstellen und insbesondere innerhalb des Wirtsmoosgewebes dominieren. Gleichzeitig gehörten die Acetobacteraceae zum wesentlichen Bestandteil der mikrobiellen Kerngemeinschaft aller untersuchten Moose, die sich aus einigen wenigen Arten, dafür zahlreich vorkommenden Prokaryoten zusammensetzt. Die vorliegende Arbeit zeigt zudem erstmals, dass sowohl Braunmoose als auch Torfmoose ein Habitat für Archaeen darstellen. Die Mehrheit der Moos-assoziierten Archaeen gehörte dabei zu den methanbildenden Gruppen, wenngleich die metabolischen Aktivitätsraten unter Laborbedingungen meistens kaum messbar waren. Im Gegensatz hierzu konnte die Bakterien-vermittelte Methanoxidation sowohl an Braunmoosen als auch an Sphagnum-Moosen gemessen werden. Dies zeigt eindrucksvoll, dass Moos-assoziierte Bakterien potenziell zur Minderung von Methanemissionen aus nördlichen, aber auch wiedervernässten Mooren beitragen können. Ein weiteres wichtiges Resultat der vorliegenden Arbeit ist die Bedeutung des Moortyps (Niedermoor oder Torfmoor), aber auch der Wirtsmoosart selbst für die Struktur der Moos-assoziierten Bakteriengemeinschaften, während die archaeellen Gemeinschaftsstrukturen weder vom Moortyp noch von der Wirtsmoosart beeinflusst wurden und sich insgesamt deutlich ähnlicher waren als die der Bakterien. Darüber hinaus konnte erstmalig gezeigt werden, dass sich die bakteriellen Gemeinschaften innerhalb der unterschiedlichen Moorsukzessionsstadien zwar ganz erheblich voneinander unterscheiden, ein kleiner Teil der Bakterien dennoch Kerngemeinschaften bilden, die mit allen untersuchten Moosarten assoziiert waren. Bei der hier präsentierten Arbeit handelt es sich um die erste systematische Studie, die sich auf einer großen geographischen Skala mit den bakteriellen und archaeellen Gemeinschaften von Braunmoosen und Torfmoosen aus naturbelassenen nördlichen Mooren befasst. Die vorliegenden Ergebnisse machen deutlich, dass die untersuchten Moose ein ganz spezifisches mikrobielles Konsortium beherbergen, welches mutmaßlich eine Schlüsselrolle bei der Etablierung der Wirtspflanzen am Anfang der Moorentwicklung spielt und darüber hinaus das Potential hat, die charakteristischen Eigenschaften von Mooren sowie deren weitere Entwicklung zu prägen. KW - moss-microbe-interactions KW - moss-associated bacteria KW - moss-associated archaea KW - northern peatlands KW - peatland core microbiome KW - Acetobacteraceae KW - moss-associated methanotrophy KW - moss-associated methanogenesis KW - Sphagnum KW - Amblystegiaceae KW - endophytes KW - brown mosses KW - epiphytes KW - peatland development KW - bryophytes KW - host-specificity KW - large-scale study KW - methanotrophic bacteria KW - methanogenic archaea KW - Essigsäurebakterien KW - Amblystegiaceae KW - Torfmoose KW - Braunmoose KW - Bryophyten KW - Endophyten KW - Epiphyten KW - Wirtsspezifität KW - geographische Großstudie KW - methanproduzierende Archaeen KW - methanoxidierende Bakterien KW - Moos-assoziierte Methanproduktion KW - Moos-assoziierte Methanoxidation KW - Moos-Mikroben-Interaktion KW - nördliche Moore KW - mikrobielle Moor-Kerngemeinschaft KW - Moorsukzession Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-630641 ER - TY - THES A1 - Ketzer, Laura T1 - The impact of stellar activity evolution on atmospheric mass loss of young exoplanets T1 - Der Einfluss der stellaren Aktivitätsentwicklung auf den atmosphärischen Massenverlust von jungen Exoplaneten N2 - The increasing number of known exoplanets raises questions about their demographics and the mechanisms that shape planets into how we observe them today. Young planets in close-in orbits are exposed to harsh environments due to the host star being magnetically highly active, which results in high X-ray and extreme UV fluxes impinging on the planet. Prolonged exposure to this intense photoionizing radiation can cause planetary atmospheres to heat up, expand and escape into space via a hydrodynamic escape process known as photoevaporation. For super-Earth and sub-Neptune-type planets, this can even lead to the complete erosion of their primordial gaseous atmospheres. A factor of interest for this particular mass-loss process is the activity evolution of the host star. Stellar rotation, which drives the dynamo and with it the magnetic activity of a star, changes significantly over the stellar lifetime. This strongly affects the amount of high-energy radiation received by a planet as stars age. At a young age, planets still host warm and extended envelopes, making them particularly susceptible to atmospheric evaporation. Especially in the first gigayear, when X-ray and UV levels can be 100 - 10,000 times higher than for the present-day sun, the characteristics of the host star and the detailed evolution of its high-energy emission are of importance. In this thesis, I study the impact of stellar activity evolution on the high-energy-induced atmospheric mass loss of young exoplanets. The PLATYPOS code was developed as part of this thesis to calculate photoevaporative mass-loss rates over time. The code, which couples parameterized planetary mass-radius relations with an analytical hydrodynamic escape model, was used, together with Chandra and eROSITA X-ray observations, to investigate the future mass loss of the two young multiplanet systems V1298 Tau and K2-198. Further, in a numerical ensemble study, the effect of a realistic spread of activity tracks on the small-planet radius gap was investigated for the first time. The works in this thesis show that for individual systems, in particular if planetary masses are unconstrained, the difference between a young host star following a low-activity track vs. a high-activity one can have major implications: the exact shape of the activity evolution can determine whether a planet can hold on to some of its atmosphere, or completely loses its envelope, leaving only the bare rocky core behind. For an ensemble of simulated planets, an observationally-motivated distribution of activity tracks does not substantially change the final radius distribution at ages of several gigayears. My simulations indicate that the overall shape and slope of the resulting small-planet radius gap is not significantly affected by the spread in stellar activity tracks. However, it can account for a certain scattering or fuzziness observed in and around the radius gap of the observed exoplanet population. N2 - Die steigende Anzahl bekannter Exoplaneten wirft Fragen zu ihrer Demografie und den Mechanismen auf, die Planeten in ihre heutige beobachtete Form bringen. Junge Planeten, die sehr nah um ihren Wirtsstern kreisen, sind extremen Umgebungen ausgesetzt, da der Stern eine hohe magnetische Aktivität aufweist. Das führt wiederum dazu, dass der Planet einer enormen Röntgen- und Extrem-UV-Strahlung ausgesetzt ist. Ist der Planet über einen längeren Zeitraum dieser intensiven photoionisierenden Strahlung ausgesetzt, kann dies dazu führen, dass Planetenatmosphären sich aufheizen, ausdehnen und durch einen hydrodynamischen Entweichungsprozess namens Photoevaporation ins All entweichen, sozusagen verdampfen. Bei Planeten, in der Größenordnung von Super-Erden und Sub-Neptunen, kann dies sogar zur vollständigen Erosion ihrer Ur-Atmosphären führen. Ein interessanter Faktor, der für diesen Massenverlustprozess eine Rolle spielt, ist die Aktivitätsentwicklung des Wirtssterns. Die Rotation eines Sterns, die den Dynamo und damit die magnetische Aktivität antreibt, ändert sich im Laufe der Lebensdauer eines Sterns erheblich. Dies hat einen starken Einfluss auf die Menge der hochenergetischen Strahlung, den ein Planet mit zunehmendem Alter des Sterns empfängt. In jungen Jahren besitzen Planeten noch warme und ausgedehnte Hüllen, was sie besonders anfällig für atmosphärische Verdunstung macht. Insbesondere in den ersten Gigajahren, wenn die Röntgen- und UV-Strahlung 100 - 10,000 Mal höher sein kann als bei der heutigen Sonne, sind die Eigenschaften des Wirtssterns und die detaillierte Entwicklung seiner hochenergetischen Emission von Bedeutung. In dieser Arbeit untersuche ich die Auswirkungen der Entwicklung der stellaren Aktivität auf den durch hochenergetische Strahlung verursachten atmosphärischen Massenverlust junger Exoplaneten. Der PLATYPOS-Code wurde im Rahmen dieser Arbeit entwickelt, um die photoevaporativen Massenverlustraten für verschiedene stellare Alter zu berechnen. Der Code verknüpft parametrisierte Planetenmasse-Radius-Beziehungen mit einem analytischen Modell für den hydrodynamischen Massenverlust. Er wurde zusammen mit Chandra- und eROSITA-Röntgenbeobachtungen dazu verwendet, den zukünftigen Massenverlust der beiden jungen Mehrplanetensysteme V1298 Tau und K2-198 zu untersuchen. Darüber hinaus wurde in einer numerischen Ensemblestudie erstmals der Effekt einer realistischen Verteilung von stellaren Aktivitäts-Tracks auf das sogenannte Radius-Tal bei kleinen Planeten untersucht. Die Arbeiten in dieser Dissertation zeigen, dass für einzelne Systeme, insbesondere wenn die Planetenmassen unbestimmt sind, der Unterschied zwischen einem jungen Wirtsstern, der einem Track mit niedriger Aktivität gegenüber einem solchen mit hoher Aktivität folgt, gravierende Auswirkungen haben kann: Die genaue Form der Aktivitätsentwicklung kann darüber entscheiden, ob ein Planet einen Teil seiner Atmosphäre behält oder seine Hülle vollständig verliert und nur den nackten Gesteinskern behält. Für ein Ensemble von simulierten Planeten ändert eine durch Beobachtungen motivierte Verteilung von Aktivitäts-Tracks die endgültige Radiusverteilung der Planeten nach mehreren Gigajahren nicht wesentlich. Meine Simulationen deuten darauf hin, dass die Form und Steigung des sich ergebenden Radius-Tals bei Kleinplaneten nicht wesentlich von der Streuung der stellaren Aktivitäts-Tracks beeinflusst wird. Eine gewisse Streuung oder Unschärfe im Radius-Tal der beobachteten Exoplanetenpopulation kann damit allerdings durchaus erklärt werden. KW - Exoplaneten KW - star-planet interaction KW - stellar physics KW - exoplanets KW - exoplanet atmospheres KW - Sternphysik KW - Stern-Planeten-Wechselwirkung KW - Exoplanetenatmosphären Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-626819 ER - TY - THES A1 - Littmann, Daniela-Christin T1 - Large eddy simulations of the Arctic boundary layer around the MOSAiC drift track T1 - Large-Eddy-Simulationen der arktischen Grenzschicht um die MOSAiC-Driftroute N2 - The icosahedral non-hydrostatic large eddy model (ICON-LEM) was applied around the drift track of the Multidisciplinary Observatory Study of the Arctic (MOSAiC) in 2019 and 2020. The model was set up with horizontal grid-scales between 100m and 800m on areas with radii of 17.5km and 140 km. At its lateral boundaries, the model was driven by analysis data from the German Weather Service (DWD), downscaled by ICON in limited area mode (ICON-LAM) with horizontal grid-scale of 3 km. The aim of this thesis was the investigation of the atmospheric boundary layer near the surface in the central Arctic during polar winter with a high-resolution mesoscale model. The default settings in ICON-LEM prevent the model from representing the exchange processes in the Arctic boundary layer in accordance to the MOSAiC observations. The implemented sea-ice scheme in ICON does not include a snow layer on sea-ice, which causes a too slow response of the sea-ice surface temperature to atmospheric changes. To allow the sea-ice surface to respond faster to changes in the atmosphere, the implemented sea-ice parameterization in ICON was extended with an adapted heat capacity term. The adapted sea-ice parameterization resulted in better agreement with the MOSAiC observations. However, the sea-ice surface temperature in the model is generally lower than observed due to biases in the downwelling long-wave radiation and the lack of complex surface structures, like leads. The large eddy resolving turbulence closure yielded a better representation of the lower boundary layer under strongly stable stratification than the non-eddy-resolving turbulence closure. Furthermore, the integration of leads into the sea-ice surface reduced the overestimation of the sensible heat flux for different weather conditions. The results of this work help to better understand boundary layer processes in the central Arctic during the polar night. High-resolving mesoscale simulations are able to represent temporally and spatially small interactions and help to further develop parameterizations also for the application in regional and global models. N2 - Das icosahedral non-hydrostatische large eddy model (ICON-LEM) wurde entlang des Driftweges des Multidisciplinary Observatory Study of the Arctic (MOSAiC) in 2019 und 20 angewendet. Das Modell nutzte horizontale Gitterauflösungen zwischen 100m und 800m auf Gebieten mit Durchmessern von 17.5km und 140 km. An den seitlichen Rändern wurde das Modell mit Analysedaten des Deutschen Wetterdienstes (DWD) angetrieben, welche mit ICON im limited area mode (ICON-LAM) mit einer horizontalen Auflösung von 3km herunterskaliert wurden. Ziel dieser Arbeit war es, die flache atmosphärische Grenzschicht in der zentralen Arktis während des polaren Winters mit einem hochauflösenden mesoskaligen Modell zu untersuchen. Die standardmäßigen Einstellungen in ICON-LEM machen es dem Modell unmöglich, die wechselwirkenden Austauschprozesse in der arktischen Grenzschicht gemäß der MOSAiC Beobachtungen abzubilden. Das implementierte Meereis-Schema in ICON beinhaltet keine Schneeschicht auf dem Meereis, was eine zu große Verzögerung der Meereisoberflächentemperatur auf atmosphärische Veränderungen bewirkt. Um die Meereisfläche schneller auf Änderungen in der Atmosphäre reagieren lassen zu können, wurde die bestehende Meereisparameterisierung in ICON um einen angepasstenWärmekapazitätsterm erweitert. Die angepasste Meereis-Parameterisierung stimmte besser mit den MOSAiC Beobachtungen überein. Allerdings ist die Meereisoberflächentemperatur im Modell aufgrund der fehlerbehafteten einfallenden, langwelligen Strahlung und dem Fehlen komplexer Oberflächenstrukturen im Meereis generell niedriger als beobachtet. Die groß-wirbellige Turbulenz-Schliessung wird der Darstellung der unteren Grenschicht während starker stabiler Schichtung besser gerecht als die Nicht-Wirbel-auflösende Turbulenz-Schließung. Desweiteren reduzierte die Integration der Risse in der Meereisoberfläche die Abweichung der sensiblen Wärme für verschiedene Wetterzustände. Die Ergebnisse dieser Arbeit helfen die Grenzschicht-Prozesse in der zentralen Arktis während der polaren Nacht besser zu verstehen. Hochauflösende mesoskalige Simulationen ermöglichen die Repräsentation zeitlicher und räumlicher klein-skaliger Wechselwirkungen und bestehende Parametrisierungen auch für regionale und globale Modelle weiterzuentwickeln. KW - Arctic KW - atmosphere KW - atmospheric science KW - high resolution KW - boundary layer KW - stable stratification KW - heat flux KW - heat capacity KW - Arktis KW - Atmosphäre KW - Atmosphärenforschung KW - hohe Auflösung KW - Grenzschicht KW - stabile Schichtung KW - Wärmefluss KW - Wärmekapazität Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-624374 ER - TY - THES A1 - Windirsch-Woiwode, Torben T1 - Permafrost carbon stabilisation by recreating a herbivore-driven ecosystem T1 - Stabilisierung von Permafrostkohlenstoff durch die Wiedereinführung eines Herbivor-geprägten Ökosystems N2 - With Arctic ground as a huge and temperature-sensitive carbon reservoir, maintaining low ground temperatures and frozen conditions to prevent further carbon emissions that contrib-ute to global climate warming is a key element in humankind’s fight to maintain habitable con-ditions on earth. Former studies showed that during the late Pleistocene, Arctic ground condi-tions were generally colder and more stable as the result of an ecosystem dominated by large herbivorous mammals and vast extents of graminoid vegetation – the mammoth steppe. Characterised by high plant productivity (grassland) and low ground insulation due to animal-caused compression and removal of snow, this ecosystem enabled deep permafrost aggrad-ation. Now, with tundra and shrub vegetation common in the terrestrial Arctic, these effects are not in place anymore. However, it appears to be possible to recreate this ecosystem local-ly by artificially increasing animal numbers, and hence keep Arctic ground cold to reduce or-ganic matter decomposition and carbon release into the atmosphere. By measuring thaw depth, total organic carbon and total nitrogen content, stable carbon iso-tope ratio, radiocarbon age, n-alkane and alcohol characteristics and assessing dominant vegetation types along grazing intensity transects in two contrasting Arctic areas, it was found that recreating conditions locally, similar to the mammoth steppe, seems to be possible. For permafrost-affected soil, it was shown that intensive grazing in direct comparison to non-grazed areas reduces active layer depth and leads to higher TOC contents in the active layer soil. For soil only frozen on top in winter, an increase of TOC with grazing intensity could not be found, most likely because of confounding factors such as vertical water and carbon movement, which is not possible with an impermeable layer in permafrost. In both areas, high animal activity led to a vegetation transformation towards species-poor graminoid-dominated landscapes with less shrubs. Lipid biomarker analysis revealed that, even though the available organic material is different between the study areas, in both permafrost-affected and sea-sonally frozen soils the organic material in sites affected by high animal activity was less de-composed than under less intensive grazing pressure. In conclusion, high animal activity af-fects decomposition processes in Arctic soils and the ground thermal regime, visible from reduced active layer depth in permafrost areas. Therefore, grazing management might be utilised to locally stabilise permafrost and reduce Arctic carbon emissions in the future, but is likely not scalable to the entire permafrost region. N2 - Mit dem arktischen Boden als riesigem und temperatursensiblen Kohlenstoffspeicher ist die Aufrechterhaltung niedriger Bodentemperaturen und gefrorener Bedingungen zur Verhinde-rung weiterer Kohlenstoffemissionen, die zum globalen Klimawandel beitragen, ein Schlüs-selelement im Kampf der Menschheit, die Erde weiterhin bewohnbar zu halten. Vorangehen-de Studien ergaben, dass die Bodenbedingungen in der Arktis während des späten Pleisto-zäns im Allgemeinen kälter und dadurch stabiler waren, als Ergebnis eines Ökosystems, das von großen pflanzenfressenden Säugetieren und weiten Flächen grasartiger Vegetation do-miniert wurde - der Mammutsteppe. Gekennzeichnet durch hohe Pflanzenproduktivität (Gras-land) und geringe Bodenisolierung aufgrund von Kompression und Schneeräumung durch Tiere, ermöglichte dieses Ökosystem eine tiefreichende Entwicklung des Permafrosts. Heut-zutage, mit der vorherrschenden Tundra- und Strauchvegetation in der Arktis, sind diese Ef-fekte nicht mehr präsent. Es scheint aber möglich, dieses Ökosystem lokal durch künstliche Erhöhung der Tierbestände nachzubilden und somit den arktischen Boden kühl zu halten, um den Abbau von organischem Material und die Freisetzung von Kohlenstoff in die Atmosphäre zu verringern. Durch Messungen der Auftautiefe, des Gesamtgehalts des organischen Kohlenstoffs und Stickstoffs, des stabilen Kohlenstoff-Isotopenverhältnisses, des Radiocarbonalters, der n-Alkan- und Alkoholcharakteristika sowie durch Bestimmung der vorherrschenden Vegetati-onstypen entlang von Beweidungsgradienten in zwei unterschiedlichen arktischen Gebieten habe ich festgestellt, dass die Schaffung ähnlicher Bedingungen wie in der Mammutsteppe möglich sein könnte. Für durch Permafrost beeinflusste Böden konnte ich zeigen, dass eine intensive Beweidung im direkten Vergleich mit unbeweideten Gebieten die Tiefe der Auftau-schicht verringert und zu höheren Gehalten an organischem Kohlenstoff im oberen Bodenbe-reich führt. Für im Winter nur oberflächlich gefrorene Böden konnte kein Anstieg des organi-schen Kohlenstoffgehalts mit zunehmender Beweidungsintensität festgestellt werden, höchstwahrscheinlich aufgrund von Störfaktoren wie vertikalen Wasser- und Kohlenstoffbe-wegungen, die nicht durch eine undurchlässige Schicht wie beim Permafrost begrenzt sind. In beiden Gebieten führte eine hohe Tieraktivität zu einer Umwandlung der Vegetation hin zu artenarmen, von Gräsern dominierten Landschaften mit weniger Sträuchern. Die Analyse von Lipid-Biomarkern ergab, dass das verfügbare organische Material zwar zwischen den Unter-suchungsgebieten unterschiedlich war, aber sowohl in Permafrostgebieten als auch in saiso-nal gefrorenen Böden in Bereichen mit hoher Tieraktivität weniger stark zersetzt war als unter geringerer Beweidungsintensität. Zusammenfassend beeinflusst eine hohe Tieraktivität die Zersetzungsvorgänge in arktischen Böden und das thermische Regime des Bodens, was sich in einer reduzierten Tiefe der Auftauschicht in Permafrostgebieten widerspiegelt. Daher könn-te das Beweidungsmanagement in Zukunft aktiv eingesetzt werden, um den Permafrost lokal zu stabilisieren und gefroren zu halten sowie die Kohlenstoffemissionen in der Arktis zu ver-ringern. Aufgrund der Größe der Fläche, die in der terrestrischen Arktis von Permafrost be-einflusst ist, wird ein solches Beweidungsmanagement aber nicht als Maßnahme auf die ge-samte Permafrostregion ausgedehnt werden können. KW - permafrost KW - carbon KW - climate change KW - grazing KW - Arctic KW - Arktis KW - Kohlenstoff KW - Klimawandel KW - Beweidung KW - Permafrost Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-624240 ER - TY - THES A1 - Gostkowska-Lekner, Natalia Katarzyna T1 - Organic-inorganic hybrids based on P3HT and mesoporous silicon for thermoelectric applications T1 - Organisch-anorganische Hybride basierend auf P3HT und porösem Silizium für thermoelektrische Anwendungen N2 - This thesis presents a comprehensive study on synthesis, structure and thermoelectric transport properties of organic-inorganic hybrids based on P3HT and porous silicon. The effect of embedding polymer in silicon pores on the electrical and thermal transport is studied. Morphological studies confirm successful polymer infiltration and diffusion doping with roughly 50% of the pore space occupied by conjugated polymer. Synchrotron diffraction experiments reveal no specific ordering of the polymer inside the pores. P3HT-pSi hybrids show improved electrical transport by five orders of magnitude compared to porous silicon and power factor values comparable or exceeding other P3HT-inorganic hybrids. The analysis suggests different transport mechanisms in both materials. In pSi, the transport mechanism relates to a Meyer-Neldel compansation rule. The analysis of hybrids' data using the power law in Kang-Snyder model suggests that a doped polymer mainly provides charge carriers to the pSi matrix, similar to the behavior of a doped semiconductor. Heavily suppressed thermal transport in porous silicon is treated with a modified Landauer/Lundstrom model and effective medium theories, which reveal that pSi agrees well with the Kirkpatrick model with a 68% percolation threshold. Thermal conductivities of hybrids show an increase compared to the empty pSi but the overall thermoelectric figure of merit ZT of P3HT-pSi hybrid exceeds both pSi and P3HT as well as bulk Si. N2 - Diese Arbeit präsentiert eine umfassende Studie über Synthese, Struktur und thermoelektrische Transporteigenschaften von organisch-anorganischen Hybriden basierend auf P3HT und porösem Silizium. Es wird die Auswirkung der Einbettung von Polymerin Siliziumporen auf den elektrischen und thermischen Transport untersucht. Morphologische Studien bestätigen eine erfolgreiche Polymerinfiltration und Diffusionsdotierung, wobei etwa 50% des Porenraums mit konjugiertem Polymer gefüllt sind. Synchrotronexperimente zeigen keine spezifische Ordnung des Polymers innerhalb der Poren. P3HT-pSi-Hybride zeigen einen um fünf Größenordnungen verbesserten elektrischen Transport im Vergleich zu porösem Silizium und sogenannte Powerfaktoren, die mit anderen P3HT-anorganischen Hybriden vergleichbar sind oder diese übertreffen. Die Analyse lässt auf unterschiedliche Transportmechanismen in beiden Materialien schließen. In pSi bezieht sich der Transportmechanismus auf eine Meyer-Neldel-{Kompensa\-tionsregel}. Die Analyse der Hybriddaten unter Verwendung des Potenzgesetzes im Kang-Snyder-Modell legt nahe, dass ein dotiertes Polymer hauptsächlich Ladungsträger für die pSi-Matrix bereitstellt, ähnlich dem Verhalten eines {dotier\-ten} Halbleiters. Der stark unterdrückte Wärmetransport in porösem Silizium wird mit einem modifizierten Landauer/Lundstrom-Modell und Effektivmediumtheorien behandelt, die zeigen, dass pSi mit einem Perkolationsschwellenwert von 68% gut mit dem Kirkpatrick-Modell übereinstimmt. Die {Wärmeleitfähigkei\-ten} von Hybriden zeigen einen Anstieg im Vergleich zum leeren pSi, aber der gesamte thermoelektrische Gütefaktor ZT des P3HT-pSi-Hybrids übertrifft sowohl pSi und P3HT als auch den von Bulk-Si. KW - physics KW - energy KW - thermoelectricity KW - organic-inorganic hybrids KW - Energie KW - organisch-anorganische Hybride KW - Physik KW - Thermoelektrizität Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-620475 ER - TY - THES A1 - Schifferle, Lukas T1 - Optical properties of (Mg,Fe)O at high pressure T1 - Optische Eigenschaften von (Mg,Fe)O unter Hochdruck N2 - Large parts of the Earth’s interior are inaccessible to direct observation, yet global geodynamic processes are governed by the physical material properties under extreme pressure and temperature conditions. It is therefore essential to investigate the deep Earth’s physical properties through in-situ laboratory experiments. With this goal in mind, the optical properties of mantle minerals at high pressure offer a unique way to determine a variety of physical properties, in a straight-forward, reproducible, and time-effective manner, thus providing valuable insights into the physical processes of the deep Earth. This thesis focusses on the system Mg-Fe-O, specifically on the optical properties of periclase (MgO) and its iron-bearing variant ferropericlase ((Mg,Fe)O), forming a major planetary building block. The primary objective is to establish links between physical material properties and optical properties. In particular the spin transition in ferropericlase, the second-most abundant phase of the lower mantle, is known to change the physical material properties. Although the spin transition region likely extends down to the core-mantle boundary, the ef-fects of the mixed-spin state, where both high- and low-spin state are present, remains poorly constrained. In the studies presented herein, we show how optical properties are linked to physical properties such as electrical conductivity, radiative thermal conductivity and viscosity. We also show how the optical properties reveal changes in the chemical bonding. Furthermore, we unveil how the chemical bonding, the optical and other physical properties are affected by the iron spin transition. We find opposing trends in the pres-sure dependence of the refractive index of MgO and (Mg,Fe)O. From 1 atm to ~140 GPa, the refractive index of MgO decreases by ~2.4% from 1.737 to 1.696 (±0.017). In contrast, the refractive index of (Mg0.87Fe0.13)O (Fp13) and (Mg0.76Fe0.24)O (Fp24) ferropericlase increases with pressure, likely because Fe Fe interactions between adjacent iron sites hinder a strong decrease of polarizability, as it is observed with increasing density in the case of pure MgO. An analysis of the index dispersion in MgO (decreasing by ~23% from 1 atm to ~103 GPa) reflects a widening of the band gap from ~7.4 eV at 1 atm to ~8.5 (±0.6) eV at ~103 GPa. The index dispersion (between 550 and 870 nm) of Fp13 reveals a decrease by a factor of ~3 over the spin transition range (~44–100 GPa). We show that the electrical band gap of ferropericlase significantly widens up to ~4.7 eV in the mixed spin region, equivalent to an increase by a factor of ~1.7. We propose that this is due to a lower electron mobility between adjacent Fe2+ sites of opposite spin, explaining the previously observed low electrical conductivity in the mixed spin region. From the study of absorbance spectra in Fp13, we show an increasing covalency of the Fe-O bond with pressure for high-spin ferropericlase, whereas in the low-spin state a trend to a more ionic nature of the Fe-O bond is observed, indicating a bond weakening effect of the spin transition. We found that the spin transition is ultimately caused by both an increase of the ligand field-splitting energy and a decreasing spin-pairing energy of high-spin Fe2+. N2 - Geodynamische Prozesse werden von den physikalischen Materialeigenschaften unter den extremen Druck- und Temperaturbedingungen des Erdinneren gesteuert, gerade diese Areale sind aber faktisch nicht für direkte Beobachtungen zugänglich. Umso wichtiger ist es, die physikalischen Eigenschaften unter Bedingungen des Erdinneren zu untersuchen. Mit diesem Ziel vor Augen erlaubt das Studium der optischen Eigenschaften von Mineralen des Erdmantels, eine große Bandbreite an physikalischen Materialeigenschaften, in einer einfachen, reproduzierbaren und effizienten Art und Weise zu bestimmen. Dadurch bieten sich wichtige Einblicke in die physikalischen Prozessen des Erdinneren. Die vorliegende Arbeit konzentriert sich auf das System Mg-Fe-O, im Speziellen auf Periklas (MgO) und seine Eisen-haltige Variante Ferroperiklas ((Mg,Fe)O), ein wichtiger Baustein planetarer Körper. Das Hauptziel der Arbeit besteht darin Verbindungen zwischen optischen Eigenschaften und physikalischen Materialeigenschaften zu finden. Gerade der Spin-Übergang in Ferroperiklas, der zweithäufigsten Phase des unteren Erdmantels, ist dabei von Bedeutung, da damit Veränderungen in den physikalischen Materialeigenschaften einhergehen. Obwohl sich der Spinübergangsbereich vermutlich bis zur Kern-Mantel-Grenze erstreckt, sind die Auswirkungen des gemischten Spin-Zustandes, bei dem sowohl Hoch- als auch Tief-Spin präsent sind, nur unzureichend untersucht. Die hier vorgestellten Studien zeigen, wie optische Eigenschaften mit anderen wichtigen physikalischen Eigenschaften wie elektrischer und thermischer Leitfähigkeit, Viskosität oder auch mit der chemischen Bindung verbunden sind. Daraus lässt sich auch ableiten wie der Spin-Übergang in Ferroperiklas diese Eigenschaften beeinflusst. Von Raumbedingungen bis zu ~140 GPa sinkt der Brechungsindex von MgO um ~2.4 % von 1.737 auf 1.696 (±0.017). Im Gegensatz dazu steigt der Brechungsindex von (Mg0.87Fe0.13)O (Fp13) und (Mg0.76Fe0.24)O (Fp24) Ferroperiklas mit dem Druck an. Dies ist auf Fe-Fe Wechselwirkungen zwischen benachbarten Eisenpositionen zurückzuführen, die eine starke Verringerung der Polarisierbarkeit, wie im Falle von reinem MgO mit zunehmender Dichte, behindern. Eine Analyse der Dispersion des Brechungsindexes von MgO (Abnahme um ~23 % von 1 Atm zu ~103 GPa) offenbart eine Verbreiterung der Bandlücke von ~7.4 eV bei 1 Atm zu ~8.5 (±0.6) eV bei ~103 GPa. Die Messung der Dispersion (zwischen 550 und 870 nm) in Fp13 zeigt eine starke Abnahme über den Bereich des Spin-Überganges (~44–100 GPa) bis zu einem Faktor von ~3. Die Bandlücke nimmt in der Region des gemischten Spin-Zustandes signifikant auf bis zu ~4.7 eV zu (entspricht einer Zunahme um den Faktor ~1.7). Dies deutet auf eine Verringerung der Elektronen-Mobilität zwischen benachbarten Fe2+-Positionen mit unterschiedlichem Spin-Zustand hin, was die bereits in früheren Arbeiten beobachtete Abnahme der elektrischen Leitfähigkeit im Bereich des gemischten Spin-Zustandes erklärt. Absorptionsspektren an Fp13 zeigen eine Druck-bedingte Zunahme der Kovalenz der Fe-O Bindung für Ferroperiklas im Hoch-Spin Zustand, wohingegen Tief-Spin Ferroperiklas einen Trend zu einer mehr ionischen Fe-O Bindung auf-weist, was auf einen Bindungs-schwächenden Effekt des Spin-Wechsels hinweist. Der Übergang von Hoch- zu Tiefspin ist letztlich auf eine Zunahme der Ligandenfeldaufspaltungsenergie sowie eine abnehmende Spinpaarungsenergie von Hoch-Spin Fe2+ zurückzuführen. KW - optical properties KW - optische Eigenschaften KW - high pressure KW - Hochdruck KW - earth mantle KW - Erdmantel KW - diamond anvil cell KW - Diamantstempelzelle KW - ferropericlase KW - Ferroperiklas KW - spectroscopy KW - Spektroskopie Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-622166 ER - TY - RPRT A1 - Bruttel, Lisa Verena A1 - Eisenkopf, Gerald A1 - Nithammer, Juri T1 - Pre-election communication in public good games with endogenous leaders T2 - CEPA Discussion Papers N2 - Leadership plays an important role for the efficient and fair solution of social dilemmas but the effectiveness of a leader can vary substantially. Two main factors of leadership impact are the ability to induce high contributions by all group members and the (expected) fair use of power. Participants in our experiment decide about contributions to a public good. After all contributions are made, the leader can choose how much of the joint earnings to assign to herself; the remainder is distributed equally among the followers. Using machine learning techniques, we study whether the content of initial open statements by the group members predicts their behavior as a leader and whether groups are able to identify such clues and endogenously appoint a “good” leader to solve the dilemma. We find that leaders who promise fairness are more likely to behave fairly, and that followers appoint as leaders those who write more explicitly about fairness and efficiency. However, in their contribution decision, followers focus on the leader’s first-move contribution and place less importance on the content of the leader’s statements. T3 - CEPA Discussion Papers - 73 KW - leadership KW - public good KW - voting KW - experiment KW - promises Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-623952 SN - 2628-653X IS - 73 ER - TY - RPRT A1 - Estrin, Saul A1 - Khavul, Susanna A1 - Kritikos, Alexander A1 - Löher, Jonas T1 - Access to digital finance BT - equity crowdfunding across countries and platforms T2 - CEPA Discussion Papers N2 - Financing entrepreneurship spurs innovation and economic growth. Digital financial platforms that crowdfund equity for entrepreneurs have emerged globally, yet they remain poorly understood. We model equity crowdfunding in terms of the relationship between the number of investors and the amount of money raised per pitch. We examine heterogeneity in the average amount raised per pitch that is associated with differences across three countries and seven platforms. Using a novel dataset of successful fundraising on the most prominent platforms in the UK, Germany, and the USA, we find the underlying relationship between the number of investors and the amount of money raised for entrepreneurs is loglinear, with a coefficient less than one and concave to the origin. We identify significant variation in the average amount invested in each pitch across countries and platforms. Our findings have implications for market actors as well as regulators who set competitive frameworks. T3 - CEPA Discussion Papers - 72 KW - equity crowdfunding KW - soft information KW - entrepreneurship KW - finance KW - financial access and inclusion Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-623261 SN - 2628-653X IS - 72 ER - TY - THES A1 - Shaw, Vasundhara T1 - Cosmic-ray transport and signatures in their local environment N2 - The origin and structure of magnetic fields in the Galaxy are largely unknown. What is known is that they are essential for several astrophysical processes, in particular the propagation of cosmic rays. Our ability to describe the propagation of cosmic rays through the Galaxy is severely limited by the lack of observational data needed to probe the structure of the Galactic magnetic field on many different length scales. This is particularly true for modelling the propagation of cosmic rays into the Galactic halo, where our knowledge of the magnetic field is particularly poor. In the last decade, observations of the Galactic halo in different frequency regimes have revealed the existence of out-of-plane bubble emission in the Galactic halo. In gamma rays these bubbles have been termed Fermi bubbles with a radial extent of ≈ 3 kpc and an azimuthal height of ≈ 6 kpc. The radio counterparts of the Fermi bubbles were seen by both the S-PASS telescopes and the Planck satellite, and showed a clear spatial overlap. The X-ray counterparts of the Fermi bubbles were named eROSITA bubbles after the eROSITA satellite, with a radial width of ≈ 7 kpc and an azimuthal height of ≈ 14 kpc. Taken together, these observations suggest the presence of large extended Galactic Halo Bubbles (GHB) and have stimulated interest in exploring the less explored Galactic halo. In this thesis, a new toy model (GHB model) for the magnetic field and non-thermal electron distribution in the Galactic halo has been proposed. The new toy model has been used to produce polarised synchrotron emission sky maps. Chi-square analysis was used to compare the synthetic skymaps with the Planck 30 GHz polarised skymaps. The obtained constraints on the strength and azimuthal height were found to be in agreement with the S-PASS radio observations. The upper, lower and best-fit values obtained from the above chi-squared analysis were used to generate three separate toy models. These three models were used to propagate ultra-high energy cosmic rays. This study was carried out for two potential sources, Centaurus A and NGC 253, to produce magnification maps and arrival direction skymaps. The simulated arrival direction skymaps were found to be consistent with the hotspots of Centaurus A and NGC 253 as seen in the observed arrival direction skymaps provided by the Pierre Auger Observatory (PAO). The turbulent magnetic field component of the GHB model was also used to investigate the extragalactic dipole suppression seen by PAO. UHECRs with an extragalactic dipole were forward-tracked through the turbulent GHB model at different field strengths. The suppression in the dipole due to the varying diffusion coefficient from the simulations was noted. The results could also be compared with an analytical analogy of electrostatics. The simulations of the extragalactic dipole suppression were in agreement with similar studies carried out for galactic cosmic rays. N2 - Unsere Galaxie wird ständig von hochenergetischen geladenen Teilchen unterschiedlicher Energie bombardiert, die als kosmische Strahlung bezeichnet werden und deren Ursprung nicht bekannt ist. Satelliten- und erdgestützte Messungen haben bisher ergeben, dass es in unserer Galaxie Beschleuniger für kosmische Strahlung gibt, z. B. die Überreste explodierender Sterne (Supernova-Überreste), aber bei den höchsten kosmischen Strahlungsenergien bleiben die Quellen ein Rätsel. Fortschritte zu erzielen ist eine Herausforderung, auch weil die kosmische Strahlung durch Magnetfelder abgelenkt wird, was bedeutet, dass die beobachtete Richtung mit der Richtung der Quelle übereinstimmen kann oder auch nicht. Unsere Galaxie weist starke Magnetfelder auf, deren Beschaffenheit noch nicht gut verstanden ist, insbesondere in der Komponente außerhalb der Scheibe (dem galaktischen Halo). Darüber hinaus haben Beobachtungen in den letzten zehn Jahren blasenartige Strukturen im galaktischen Halo mit enormen Gesamtenergien aufgedeckt, die auch als galaktische Halo-Blasen bezeichnet werden. All dies motiviert uns, den galaktischen Halo zu untersuchen. In meiner Doktorarbeit schlagen wir ein neues, vereinfachtes Magnetfeldmodell für galaktische Halo-Blasen vor. Das Modell umfasst sowohl strukturierte als auch turbulente Komponenten des Magnetfelds. Das vereinfachte Modell wurde mit Beobachtungsdaten verglichen, um den am besten passenden Parametersatz zusammen mit den Unsicherheiten zu erhalten. Ich untersuchte die Propagation der ultrahochenergetischen kosmischen Strahlung durch das vereinfachte Modell und untersuchte dessen Auswirkungen auf die Ankunftsrichtungen der ultrahochenergetischen kosmischen Strahlung für zwei potenzielle Quellen, Centaurus~A und NGC~253. Außerdem habe ich sowohl numerisch als auch analytisch abgeschätzt, wie stark ein Dipol der extragalaktischen kosmischen Strahlung durch verschiedene Konfigurationen der turbulenten Magnetfelder des vereinfachten Modells unterdrückt wird. Die Ergebnisse all dieser Arbeiten werden in dieser Arbeit im Detail vorgestellt. KW - galactic magnetic fields KW - synchrotron radiation KW - non-thermal radiation KW - ultra-high energy cosmic rays KW - cosmic ray propagation KW - Ausbreitung der kosmischen Strahlung KW - galaktische Magnetfelder KW - nicht-thermische Strahlung KW - Synchrotronstrahlung KW - ultrahochenergetische kosmische Strahlung Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-620198 ER - TY - THES A1 - Metz, Malte T1 - Finite fault earthquake source inversions T1 - Ausgedehnte Erdbebenquellinversion BT - implementation and testing of a novel physics-based rupture model BT - Implementierung und Validierung eines neuen selbst-ähnlichen Bruchmodels N2 - Earthquake modeling is the key to a profound understanding of a rupture. Its kinematics or dynamics are derived from advanced rupture models that allow, for example, to reconstruct the direction and velocity of the rupture front or the evolving slip distribution behind the rupture front. Such models are often parameterized by a lattice of interacting sub-faults with many degrees of freedom, where, for example, the time history of the slip and rake on each sub-fault are inverted. To avoid overfitting or other numerical instabilities during a finite-fault estimation, most models are stabilized by geometric rather than physical constraints such as smoothing. As a basis for the inversion approach of this study, we build on a new pseudo-dynamic rupture model (PDR) with only a few free parameters and a simple geometry as a physics-based solution of an earthquake rupture. The PDR derives the instantaneous slip from a given stress drop on the fault plane, with boundary conditions on the developing crack surface guaranteed at all times via a boundary element approach. As a side product, the source time function on each point on the rupture plane is not constraint and develops by itself without additional parametrization. The code was made publicly available as part of the Pyrocko and Grond Python packages. The approach was compared with conventional modeling for different earthquakes. For example, for the Mw 7.1 2016 Kumamoto, Japan, earthquake, the effects of geometric changes in the rupture surface on the slip and slip rate distributions could be reproduced by simply projecting stress vectors. For the Mw 7.5 2018 Palu, Indonesia, strike-slip earthquake, we also modelled rupture propagation using the 2D Eikonal equation and assuming a linear relationship between rupture and shear wave velocity. This allowed us to give a deeper and faster propagating rupture front and the resulting upward refraction as a new possible explanation for the apparent supershear observed at the Earth's surface. The thesis investigates three aspects of earthquake inversion using PDR: (1) to test whether implementing a simplified rupture model with few parameters into a probabilistic Bayesian scheme without constraining geometric parameters is feasible, and whether this leads to fast and robust results that can be used for subsequent fast information systems (e.g., ground motion predictions). (2) To investigate whether combining broadband and strong-motion seismic records together with near-field ground deformation data improves the reliability of estimated rupture models in a Bayesian inversion. (3) To investigate whether a complex rupture can be represented by the inversion of multiple PDR sources and for what type of earthquakes this is recommended. I developed the PDR inversion approach and applied the joint data inversions to two seismic sequences in different tectonic settings. Using multiple frequency bands and a multiple source inversion approach, I captured the multi-modal behaviour of the Mw 8.2 2021 South Sandwich subduction earthquake with a large, curved and slow rupturing shallow earthquake bounded by two faster and deeper smaller events. I could cross-validate the results with other methods, i.e., P-wave energy back-projection, a clustering analysis of aftershocks and a simple tsunami forward model. The joint analysis of ground deformation and seismic data within a multiple source inversion also shed light on an earthquake triplet, which occurred in July 2022 in SE Iran. From the inversion and aftershock relocalization, I found indications for a vertical separation between the shallower mainshocks within the sedimentary cover and deeper aftershocks at the sediment-basement interface. The vertical offset could be caused by the ductile response of the evident salt layer to stress perturbations from the mainshocks. The applications highlight the versatility of the simple PDR in probabilistic seismic source inversion capturing features of rather different, complex earthquakes. Limitations, as the evident focus on the major slip patches of the rupture are discussed as well as differences to other finite fault modeling methods. N2 - Erdbebenmodelle sind der Schlüssel zu einem detaillierten Verständnis der zugrunde liegenden Bruchprozesse. Die kinematischen oder dynamischen Brucheigenschaften werden mit Hilfe von ausgedehnten Bruchmodellen bestimmt. Dadurch können Details, wie z.B. die Bruchrichtung und -geschwindigkeit oder die Verschiebungsverteilung, aufgelöst werden. Häufig sind ausgedehnte Bruchmodelle durch sehr viele freie Parameter definiert, etwa individuelle Verschiebungen und Verschiebungsrichtungen auf den diskretisierten Bruchflächenelementen. Die große Anzahl an Parametern sorgt dafür, dass Inversionsprobleme hochgradig unterbestimmt sind. Um daraus resultierende numerische Instabilitäten zu verhinden, werden diese Modelle häufig mit zusätzlichen eher geometrischen als physikalischen Annahmen stabilisiert, z.B. im Bezug auf die Rauigkeit der Verschiebung auf der Bruchfläche. Die Basis für die Inversionsmethode in dieser Dissertaton bildet das von uns entwickelete pseudo-dynamische Bruchmodel (PDR). Die PDR basiert auf wenigen freien Parametern und einer simplen, planaren Geometrie und ergibt eine physik-gestützte Lösung für Erdbebenbrüche. Die PDR bestimmt die instantane Verschiebung basierend auf gegebenen Spannungsänderungen auf der Bruchfläche. Die Randbedingung der Spannungsänderung wird dabei zu jedem Zeitpunkt der Bruchentwicklung über eine Randelementmethode eingehalten. Als Nebenprodukt dessen kann die Herdzeitfunktion an jedem Punkt der Bruchfläche als Ergebnis des Models bestimmt werden, und muss daher nicht vorher definiert werden. Der PDR-Modellierungsansatz wurde mit anderen Modellen anhand verschiedener Erdbeben verglichen. Am Beispiel des Mw 7,1 2016 Kumamoto, Japan, Bebens konnte der Effekt einer gekrümmten Bruchfläche auf die daraus resultierenden Verschiebungsverteilung und Verschiebungsraten durch eine Projezierung der Spannungsvektoren reproduziert werden. Für das Mw 7,5 2018 Palu, Indonesien, Beben haben wir die Bruchausbreitung auf Grundlage der 2D-Eikonalgleichung und basierend auf einem angenommenen linearen Zusammenhang zwischen Bruch- und Scherwellengeschwindigkeit modelliert. Dadurch konnten wir die beobachtete Supershear-Bruchausbreitung als Ergebnis einer möglichen tiefen und daher schnelleren Bruchfront mit einer Abstrahlung an die Erdoberfläche erklären. Der PDR-Vorwärtsmodellierungs-Code wurde in den Open-Source Python Paketen Pyrocko und Grond veröffentlicht. Meine Dissertation beleuchtet drei Aspekte der Erdbebeninversion unter Zuhilfenahme der PDR: (1) Ist eine Implementation eines simplen Bruchmodels mit wenigen Parametern in ein probabalistisches Bayesisches Inversionsprogramm möglich? Kann dies schnelle und robuste Ergebnisse für weitere Folgeanwendungen, wie Bodenbeschleunigungsvorhersagen, liefern? (2) Wie hilft die Kombination aus seismischen Breitband- und Accelerometerdaten mit Nahfelddeformationsdaten, Inversionsergebnisse mit der PDR zu verbessern? (3) Können komplexe Brüche über einen multiplen PDR-Quellinversionsansatz aufgelöst werden und wenn ja, wann ist dies möglich? Ich habe den PDR-Inversionsansatz entwickelt und auf zwei Erdbeben-Sequenzen in verschiedenen tektonischen Umgebungen angewandt. Mit Hilfe von verschiedenen Datensätzen in mehreren Frequenzbändern innerhalb von einfachen und multiplen Bruchflächeninversionen konnte ich das multi-modale Mw 8,2 2021 South Sandwich Erdbeben characterisieren. Dieses bestand aus einem langen, flachen, langsam brechenden Beben entlang der gekrümmten Subduktionszone, welches durch zwei kleinere, tiefere Brüche mit schnelleren Bruchgeschwindigkeiten begrenzt wurde. Die Validierung mit Ergebnissen aus einer P-Wellen Back-Projection, der Clusteranalyse von Nachbeben und einer Tsunami-Modelierung zeigten eine hohe Konsistenz mit den PDR-Resultaten. Die Kombination von seismischen Daten und Oberflächendeformationen in einer multiplen PDR-Inversion habe ich auch zur Analyse eines Beben-Triplets vom Juni 2022 im Südosten des Irans genutzt. Die Inversionen konnten im Zusammenspiel mit relokalisierten Nachbeben einen neuen Fall von vertikaler Haupt-/Nachbebenseparation auflösen. Während die großen Hauptbeben im flachen Sediment stattfanden, sind die Nachbeben hauptsächlich entlang der tieferen Grenzfläche zwischen Sediment und kristallinem Grundgebirge aufgetreten. Eine Erklärung dafür ist das duktile Fließen einer vorhandenen Salzschicht auf der Grenzfläche, ausgelöst durch Spannungsänderungen im Zuge der Hauptbeben. Die Anwendungen konnten die Vielseitigkeit der PDR als simples Quellmodel innerhalb von seismischen Quellinversionen zeigen. Limitierungen der Inversion, wie der augenscheinliche Fokus auf den Hauptverschiebungsbereich eines Bebens, werden in dieser Arbeit genauso diskutiert wie die Einordnung der PDR im Vergleich zu anderen ausgedehnten Quellmodellen. KW - seismology KW - inversion KW - source model KW - Seismologie KW - Inversion KW - Bruchmodel Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-619745 ER - TY - THES A1 - Eggers, Nele T1 - Properties of Arctic aerosol in the transition between Arctic haze to summer season derived by lidar N2 - During the Arctic haze period, the Arctic troposphere consists of larger, yet fewer, aerosol particles than during the summer (Tunved et al., 2013; Quinn et al., 2007). Interannual variability (Graßl and Ritter, 2019; Rinke et al., 2004), as well as unknown origins (Stock et al., 2014) and properties of aerosol complicate modeling these annual aerosol cycles. This thesis investigates the modification of the microphysical properties of Arctic aerosols in the transition from Arctic haze to the summer season. Therefore, lidar measurements of Ny-Ålesund from April 2021 to the end of July 2021 are evaluated based on the aerosols’ optical properties. An overview of those properties will be provided. Furthermore, parallel radiosonde data is considered for indication of hygroscopic growth. The annual aerosol cycle in 2021 differs from expectations based on previous studies from Tunved et al. (2013) and Quinn et al. (2007). Developments of backscatter, extinction, aerosol depolarisation, lidar ratio and color ratio show a return of the Arctic haze in May. The haze had already reduced in April, but regrew afterwards. The average Arctic aerosol displays hygroscopic behaviour, meaning growth due to water uptake. To determine such a behaviour is generally laborious because various meteorological circumstances need to be considered. Two case studies provide further information on these possible events. In particular, a day with a rare ice cloud and with highly variable water cloud layers is observed. N2 - Während der Arctic haze Periode sind größere, jedoch auch weniger, Aerosole in der arktischen Troposphäre vorhanden als im Sommer (Tunved et al., 2013; Quinn et al., 2007). Interannuale Variabilität (Graßl and Ritter, 2019; Rinke et al., 2004), sowie unbekannte Herkunft (Stock et al., 2014) und Eigenschaften der Aerosole erschweren die Modellierung der Aerosol-Jahresgänge. Diese Arbeit untersucht, wie sich die mikrophysikalischen Eigenschaften der Aerosole beim Übergang vom Arctic haze zur Sommerzeit ändern. Dafür werden Lidar Messungen aus Ny-Ålesund von April 2021 bis Ende Juli 2021 hinsichtlich der optischen Eigenschaften der Aerosole untersucht. Ein Überblick über diese Eigenschaften wird gegeben. Zusätzlich werden parallele Radiosondendaten mit einbezogen, um Hinweise auf hygroskopisches Wachstum zu erhalten. Der Jahresgang der Aerosole in 2021 unterscheidet sich von Erwartungen, gebildet aus früheren Studien von Tunved et al. (2013) und Quinn et al. (2007). Die zeitliche Entwicklung des Rückstreuungskoeffizienten, Extinktionskoeffizienten, der Aerosol Depolarisation, des Lidarverhältnisses und des Farbverhältnisses zeigen, dass der Arctic haze im Mai zurückkehrt. Im April hatte der haze bereits abgenommen, stieg in Mai jedoch wieder an. In der Arktis zeigt ein Aerosol typischerweise hygroskopisches Verhalten - mit anderen Worten, es wächst durch Aufnahme von Wasser. Ein solches alleine aus Fernerkundungsdaten zu bestimmen ist jedoch in der Regel aufwendig, weil unterschiedliche meteorologische Bedingungen zu berücksichtigen sind. Zwei Fallstudien geben mehr Informationen über die möglichen hygroskopischen Verhaltensweisen der Aerosole. Insbesondere wird auch ein Tag mit einer Eiswolke und stark fluktuierenden Wasserwolken beobachtet. KW - remote sensing KW - Lidar KW - Arctic aerosol KW - aerosol: optical properties KW - aerosol: hygroscopic growth KW - Arctic haze KW - arktischer Dunst KW - aerosol: hygroskopisches Wachstum KW - aerosol: optische Eigenschaften KW - arktisches Aerosol KW - Fernerkundung KW - Lidar Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-619438 ER - TY - JOUR A1 - Klempin, Christiane A1 - Rehfeldt, Daniel T1 - How to Promote and Measure Reflective Skills in Depth and Breadth of English and Physics Teacher Trainees JF - Reflexion in der Lehrkräftebildung: Empirisch – Phasenübergreifend – Interdisziplinär (Potsdamer Beiträge zur Lehrerbildung und Bildungsforschung ; 4) N2 - Supporting reflection in preservice during university-based training is, without doubt, a crucial aspect in attaining teacher professionalism. Therefore, an on-campus seminar designed to relate theory to practice and vice versa – the so-called ‘Lehr-Lern-Labor-Seminar (LLLS)’ – was implemented over the course of five terms to stimulate reflective skills of English and Physics teacher trainees. Investigations on the effectiveness of three types of the LLLS (no video and two types of video-supported reflections) compared to a parallel group (PG) and a control group (CG) occurred in a mixed methods quasi-experimental study. Reflective skills were elicited with vignettes, relevant covariates with questionnaires. Reflective development was then traced in the dimensions depth and breadth employing a qualitative content analysis. MANCOVA (Multivariate Analysis of Covariance) and regression analyses revealed a substantive increase of reflective depth for English and Physics teacher trainees and breadth development for English LLLS-participants in contrast to both, a PG and a CG, even when controlling for the subjects’ individual prerequisites. KW - reflective skills KW - mixed methods KW - reflective depth KW - reflective breadth KW - English and Physics teacher trainees Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-619381 SN - 978-3-86956-566-8 SN - 2626-3556 SN - 2626-4722 IS - 4 SP - 115 EP - 121 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - THES A1 - Stanke, Sandra T1 - AC electrokinetic immobilization of influenza viruses and antibodies on nanoelectrode arrays for on-chip immunoassays T1 - AC elektrokinetische Immobilisierung von Influenzaviren und Antikörpern auf Nanoelektrodenarrays für on-Chip Immunoassays N2 - In the present thesis, AC electrokinetic forces, like dielectrophoresis and AC electroosmosis, were demonstrated as a simple and fast method to functionalize the surface of nanoelectrodes with submicrometer sized biological objects. These nanoelectrodes have a cylindrical shape with a diameter of 500 nm arranged in an array of 6256 electrodes. Due to its medical relevance influenza virus as well as anti-influenza antibodies were chosen as a model organism. Common methods to bring antibodies or proteins to biosensor surfaces are complex and time-consuming. In the present work, it was demonstrated that by applying AC electric fields influenza viruses and antibodies can be immobilized onto the nanoelectrodes within seconds without any prior chemical modification of neither the surface nor the immobilized biological object. The distribution of these immobilized objects is not uniform over the entire array, it exhibits a decreasing gradient from the outer row to the inner ones. Different causes for this gradient have been discussed, such as the vortex-shaped fluid motion above the nanoelectrodes generated by, among others, electrothermal fluid flow. It was demonstrated that parts of the accumulated material are permanently immobilized to the electrodes. This is a unique characteristic of the presented system since in the literature the AC electrokinetic immobilization is almost entirely presented as a method just for temporary immobilization. The spatial distribution of the immobilized viral material or the anti-influenza antibodies at the electrodes was observed by either the combination of fluorescence microscopy and deconvolution or by super-resolution microscopy (STED). On-chip immunoassays were performed to examine the suitability of the functionalized electrodes as a potential affinity-based biosensor. Two approaches were pursued: A) the influenza virus as the bio-receptor or B) the influenza virus as the analyte. Different sources of error were eliminated by ELISA and passivation experiments. Hence, the activity of the immobilized object was inspected by incubation with the analyte. This resulted in the successful detection of anti-influenza antibodies by the immobilized viral material. On the other hand, a detection of influenza virus particles by the immobilized anti-influenza antibodies was not possible. The latter might be due to lost activity or wrong orientation of the antibodies. Thus, further examinations on the activity of by AC electric fields immobilized antibodies should follow. When combined with microfluidics and an electrical read-out system, the functionalized chips possess the potential to serve as a rapid, portable, and cost-effective point-of-care (POC) device. This device can be utilized as a basis for diverse applications in diagnosing and treating influenza, as well as various other pathogens. N2 - In der vorliegenden Arbeit wurden AC elektrokinetische Kräfte, wie die Dielektrophorese und die AC Elektroosmose, als einfache und schnelle Methode zur Funktionalisierung der Oberfläche von Nanoelektroden mit biologischen Objekten in Submikrometergröße demonstriert. Diese Nanoelektroden haben eine zylindrische Form mit einem Durchmesser von 500 nm und sind in einem Array aus 6256 Elektroden angeordnet. Aufgrund ihrer medizinischen Relevanz wurden Influenzaviren sowie anti-Influenza Antikörper als Modellorganismus ausgewählt. Gängige Methoden, um Antikörper oder Proteine auf Biosensoroberflächen zu bringen, sind komplex und zeitaufwändig. In der vorliegenden Arbeit wurde gezeigt, dass durch die Anwendung elektrischer Wechselfelder Influenzaviren und Antikörper innerhalb von Sekunden auf den Nanoelektroden immobilisiert werden können, ohne dass zuvor eine chemische Modifikation der Oberfläche noch des immobilisierten biologischen Objekts erforderlich ist. Die Verteilung dieser immobilisierten Objekte ist über das gesamte Array ungleichmäßig. Es kommt zur Ausbildung eines Gradienten, welcher von der äußeren zur den inneren Reihen hin abnimmt. Verschiedene Ursachen für diesen Gradienten wurden diskutiert, beispielsweise der Vortex-förmige Flüssigkeitsstrom über den Nanoelektroden, der unter anderem durch elektrothermische Flüssigkeitsbewegung erzeugt wird. Es wurde gezeigt, dass Teile des akkumulierten Materials dauerhaft an den Elektroden immobilisiert sind. Dies ist ein Alleinstellungsmerkmal des vorgestellten Systems, da in der Literatur die AC elektrokinetische Immobilisierung fast ausschließlich als Methode nur zur temporären Immobilisierung dargestellt wird. Die räumliche Verteilung des immobilisierten Virusmaterials bzw. der anti-Influenza Antikörper an den Elektroden wurde entweder durch die Kombination aus Fluoreszenzmikroskopie und Dekonvolution oder durch super-resolution Mikroskopie (STED) betrachtet. Es wurden On-Chip-Immunoassays durchgeführt, um die Eignung der funktionalisierten Elektroden für einen potenziellen affinitätsbasierten Biosensor zu untersuchen. Dabei wurden zwei Ansätze verfolgt: A) Influenzaviren als Biorezeptor oder B) Influenzavirus als Analyt. Verschiedene Fehlerquellen wurden mittels ELISA und Passivierungsexperimente eliminiert. Infolgedessen wurde die Aktivität der immobilisierten Objekte durch Inkubation mit dem Analyten überprüft. Dies führte zum erfolgreichen Nachweis von anti-Influenza Antikörpern mittels immobilisiertem Virusmaterial. Andererseits war ein Nachweis von Influenzaviruspartikeln durch die immobilisierten anti-Influenza Antikörper nicht möglich. Letzteres könnte auf einen Aktivitätsverlust oder eine falsche Ausrichtung der Antikörper zurückzuführen sein. Daher sollten weitere Untersuchungen zur Aktivität von durch elektrische Wechselfelder immobilisierte Antikörper folgen. In Kombination mit Mikrofluidik und einem elektrischen Auslesesystem besitzen die funktionalisierten Chips das Potenzial, als schnelle, tragbare und kostengünstige Point-of-Care-Einheit (POC) zu dienen. Dieses Einheit kann als Grundlage für vielfältige Anwendungen bei der Diagnose und Behandlung von Influenza und verschiedenen anderen Krankheitserregern genutzt werden. KW - AC electrokinetics KW - AC Elektrokinetik KW - AC electroosmosis KW - AC Elektroosmosis KW - dielectrophoresis KW - Dielektrophorese KW - virus KW - Virus KW - influenza KW - Influenza KW - antibody KW - Antikörper KW - nanoelectrodes KW - Nanoelektroden KW - lab-on-chip KW - lab-on-chip KW - LOC KW - LOC KW - point-of-care KW - point-of-care KW - POC KW - POC KW - immunoassay KW - Immunoassay Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-617165 ER - TY - THES A1 - Ilić Petković, Nikoleta T1 - Stars under influence: evidence of tidal interactions between stars and substellar companions T1 - Sterne unter Einfluss: Beweise für Gezeitenwechselwirkungen zwischen Sternen und substellaren Begleitern N2 - Tidal interactions occur between gravitationally bound astrophysical bodies. If their spatial separation is sufficiently small, the bodies can induce tides on each other, leading to angular momentum transfer and altering of evolutionary path the bodies would have followed if they were single objects. The tidal processes are well established in the Solar planet-moon systems and close stellar binary systems. However, how do stars behave if they are orbited by a substellar companion (e.g. a planet or a brown dwarf) on a tight orbit? Typically, a substellar companion inside the corotation radius of a star will migrate toward the star as it loses orbital angular momentum. On the other hand, the star will gain angular momentum which has the potential to increase its rotation rate. The effect should be more pronounced if the substellar companion is more massive. As the stellar rotation rate and the magnetic activity level are coupled, the star should appear more magnetically active under the tidal influence of the orbiting substellar companion. However, the difficulty in proving that a star has a higher magnetic activity level due to tidal interactions lies in the fact that (I) substellar companions around active stars are easier to detect if they are more massive, leading to a bias toward massive companions around active stars and mimicking the tidal interaction effect, and that (II) the age of a main-sequence star cannot be easily determined, leaving the possibility that a star is more active due to its young age. In our work, we overcome these issues by employing wide stellar binary systems where one star hosts a substellar companion, and where the other star provides the magnetic activity baseline for the host star, assuming they have coevolved, and thereby provides the host's activity level if tidal interactions have no effect on it. Firstly, we find that extrasolar planets can noticeably increase the host star's X-ray luminosity and that the effect is more pronounced if the exoplanet is at least Jupiter-like in mass and close to the star. Further, we find that a brown dwarf will have an even stronger effect, as expected, and that the X-ray surface flux difference between the host star and the wide stellar companion is a significant outlier when compared to a large sample of similar wide binary systems without any known substellar companions. This result proves that substellar hosting wide binary systems can be good tools to reveal the tidal effect on host stars, and also show that the typical stellar age indicators as activity or rotation cannot be used for these stars. Finally, knowing that the activity difference is a good tracer of the substellar companion's tidal impact, we develop an analytical method to calculate the modified tidal quality factor Q' of individual host stars, which defines the tidal dissipation efficiency in the convective envelope of a given main-sequence star. N2 - Gezeitenwechselwirkungen treten zwischen gravitativ gebundenen astrophysikalischen Körpern auf. Wenn ihr räumlicher Abstand hinreichend gering ist, können die Körper gegenseitig Gezeiten hervorrufen, die eine Drehimpulsübertragung bewirken und den Entwicklungsweg der Körper verändern, den sie als Einzelobjekte einschlagen würden. Die Gezeitenprozesse sind in den Planet-Mond-Systemen des Sonnensystems und in engen Doppelsternsystemen gut bekannt. Wie verhalten sich jedoch Sterne, die von einem substellaren Begleiter (z. B. einem Planeten oder einem Braunen Zwerg) auf einer engen Bahn umkreist werden? In der Regel wandert ein substellarer Begleiter innerhalb des Korotationsradius eines Sterns in Richtung des Sterns, da er an Bahndrehimpuls verliert. Auf der anderen Seite gewinnt der Stern an Drehimpuls, was seine Rotationsrate erhöhen kann. Dieser Effekt dürfte umso ausgeprägter sein, je massereicher der substellare Begleiter ist. Da die Rotationsrate des Sterns und das Niveau der magnetischen Aktivität gekoppelt sind, sollte der Stern unter dem Gezeiteneinfluss des ihn umkreisenden substellaren Begleiters magnetisch aktiver erscheinen. Die Schwierigkeit beim Nachweis, dass ein Stern aufgrund von Gezeitenwechselwirkungen eine höhere magnetische Aktivität aufweist, liegt jedoch darin, dass (I) substellare Begleiter um aktive Sterne leichter aufzuspüren sind, wenn sie massereicher sind, wodurch eine Tendenz zu massereichen Begleitern um aktive Sterne entsteht und der Effekt der Gezeitenwechselwirkung nachgeahmt wird, und dass (II) das Alter eines Hauptreihensterns nicht leicht bestimmt werden kann, so dass die Möglichkeit besteht, dass ein Stern aufgrund seines jungen Alters aktiver ist. In unserer Arbeit überwinden wir diese Hindernisse, indem wir weiträumige Doppelsternsysteme verwenden, in denen ein Stern einen substellaren Begleiter beherbergt und in denen der andere Stern den Referenzwert für die magnetische Aktivität des Wirtssterns liefert im Fall das Gezeitenwechselwirkungen keinen Einfluss auf ihn haben, wobei wir davon ausgehen, dass die Sterne sich gemeinsam entwickelt haben. Erstens stellen wir fest, dass extrasolare Planeten die Röntgenleuchtkraft des Wirtssterns merklich erhöhen können und dass der Effekt ausgeprägter ist, wenn der Exoplanet mindestens eine jupiterähnliche Masse hat und sich nahe am Stern befindet. Darüber hinaus stellen wir fest, dass ein Brauner Zwerg erwartungsgemäß einen noch stärkeren Einfluss hat und dass der Unterschied im Röntgenflächenfluss zwischen dem Wirtsstern und dem weiträumigen stellaren Begleiter ein signifikanter Ausreißer im Vergleich zu einer großen Stichprobe ähnlicher weiträumiger Doppelsternsysteme ohne bekannte substellare Begleiter ist. Dieses Ergebnis beweist, dass weiträumige Doppelsternsysteme mit substellaren Begleitern ein gutes Werkzeug sein können, um den Gezeiteneffekt auf Wirtssterne aufzudecken, und zeigt auch, dass die typischen stellaren Altersindikatoren wie Aktivität oder Rotation für diese Sterne nicht verwendet werden können. Mit dem Wissen, dass der Aktivitätsunterschied ein guter Indikator für den Gezeiteneinfluss des substellaren Begleiters ist, entwickeln wir schließlich eine analytische Methode zur Berechnung des modifizierten Gezeitenqualitätsfaktors Q' für einzelne Wirtssterne, der die Effizienz der Gezeitendissipation in der konvektiven Hülle eines gegebenen Hauptreihensterns definiert. KW - stellar evolution KW - tidal interactions KW - star-planet systems KW - star-brown dwarf systems KW - Stern-Brauner Zwerg Systeme KW - Stern-Planet Systeme KW - Sternentwicklung KW - Gezeitenwechselwirkungen Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-615972 ER - TY - JOUR A1 - Pandey, Yogesh T1 - Enriched cell-free and cell-based native membrane derived vesicles (nMV) enabling rapid in-vitro electrophysiological analysis of the voltage-gated sodium channel 1.5. JF - Biochimica et Biophysica Acta (BBA) - Biomembranes N2 - Here, we demonstrate the utility of native membrane derived vesicles (nMVs) as tools for expeditious electrophysiological analysis of membrane proteins. We used a cell-free (CF) and a cell-based (CB) approach for preparing protein-enriched nMVs. We utilized the Chinese Hamster Ovary (CHO) lysate-based cell-free protein synthesis (CFPS) system to enrich ER-derived microsomes in the lysate with the primary human cardiac voltage-gated sodium channel 1.5 (hNaV1.5; SCN5A) in 3 h. Subsequently, CB-nMVs were isolated from fractions of nitrogen-cavitated CHO cells overexpressing the hNaV1.5. In an integrative approach, nMVs were micro-transplanted into Xenopus laevis oocytes. CB-nMVs expressed native lidocaine-sensitive hNaV1.5 currents within 24 h; CF-nMVs did not elicit any response. Both the CB- and CF-nMV preparations evoked single-channel activity on the planar lipid bilayer while retaining sensitivity to lidocaine application. Our findings suggest a high usability of the quick-synthesis CF-nMVs and maintenance-free CB-nMVs as ready-to-use tools for in-vitro analysis of electrogenic membrane proteins and large, voltage-gated ion channels. KW - Cell-free protein synthesis KW - Electrophysiology KW - Membrane proteins KW - Micro-translantation KW - Protein expression Y1 - 2023 U6 - https://doi.org/10.1016/j.bbamem.2023.184144 SN - 1879-2642 SN - 0005-2736 VL - 1865 IS - 5 PB - Elsevier CY - Amsterdam ER - TY - THES A1 - Kunkel, Stefanie T1 - Green industry through industry 4.0? Expected and observed effects of digitalisation in industry for environmental sustainability T1 - Grüne Industrie durch Industrie 4.0? Erwartete und beobachtete Auswirkungen der Digitalisierung in der Industrie auf ökologische Nachhaltigkeit N2 - Digitalisation in industry – also called “Industry 4.0” – is seen by numerous actors as an opportunity to reduce the environmental impact of the industrial sector. The scientific assessments of the effects of digitalisation in industry on environmental sustainability, however, are ambivalent. This cumulative dissertation uses three empirical studies to examine the expected and observed effects of digitalisation in industry on environmental sustainability. The aim of this dissertation is to identify opportunities and risks of digitalisation at different system levels and to derive options for action in politics and industry for a more sustainable design of digitalisation in industry. I use an interdisciplinary, socio-technical approach and look at selected countries of the Global South (Study 1) and the example of China (all studies). In the first study (section 2, joint work with Marcel Matthess), I use qualitative content analysis to examine digital and industrial policies from seven different countries in Africa and Asia for expectations regarding the impact of digitalisation on sustainability and compare these with the potentials of digitalisation for sustainability in the respective country contexts. The analysis reveals that the documents express a wide range of vague expectations that relate more to positive indirect impacts of information and communication technology (ICT) use, such as improved energy efficiency and resource management, and less to negative direct impacts of ICT, such as electricity consumption through ICT. In the second study (section 3, joint work with Marcel Matthess, Grischa Beier and Bing Xue), I conduct and analyse interviews with 18 industry representatives of the electronics industry from Europe, Japan and China on digitalisation measures in supply chains using qualitative content analysis. I find that while there are positive expectations regarding the effects of digital technologies on supply chain sustainability, their actual use and observable effects are still limited. Interview partners can only provide few examples from their own companies which show that sustainability goals have already been pursued through digitalisation of the supply chain or where sustainability effects, such as resource savings, have been demonstrably achieved. In the third study (section 4, joint work with Peter Neuhäusler, Melissa Dachrodt and Marcel Matthess), I conduct an econometric panel data analysis. I examine the relationship between the degree of Industry 4.0, energy consumption and energy intensity in ten manufacturing sectors in China between 2006 and 2019. The results suggest that overall, there is no significant relationship between the degree of Industry 4.0 and energy consumption or energy intensity in manufacturing sectors in China. However, differences can be found in subgroups of sectors. I find a negative correlation of Industry 4.0 and energy intensity in highly digitalised sectors, indicating an efficiency-enhancing effect of Industry 4.0 in these sectors. On the other hand, there is a positive correlation of Industry 4.0 and energy consumption for sectors with low energy consumption, which could be explained by the fact that digitalisation, such as the automation of previously mainly labour-intensive sectors, requires energy and also induces growth effects. In the discussion section (section 6) of this dissertation, I use the classification scheme of the three levels macro, meso and micro, as well as of direct and indirect environmental effects to classify the empirical observations into opportunities and risks, for example, with regard to the probability of rebound effects of digitalisation at the three levels. I link the investigated actor perspectives (policy makers, industry representatives), statistical data and additional literature across the system levels and consider political economy aspects to suggest fields of action for more sustainable (digitalised) industries. The dissertation thus makes two overarching contributions to the academic and societal discourse. First, my three empirical studies expand the limited state of research at the interface between digitalisation in industry and sustainability, especially by considering selected countries in the Global South and the example of China. Secondly, exploring the topic through data and methods from different disciplinary contexts and taking a socio-technical point of view, enables an analysis of (path) dependencies, uncertainties, and interactions in the socio-technical system across different system levels, which have often not been sufficiently considered in previous studies. The dissertation thus aims to create a scientifically and practically relevant knowledge basis for a value-guided, sustainability-oriented design of digitalisation in industry. N2 - Die Digitalisierung der Industrie, auch „Industrie 4.0“ genannt, wird von zahlreichen Akteuren als Chance zur Reduktion der Umweltauswirkungen des industriellen Sektors betrachtet. Die wissenschaftlichen Bewertungen der Effekte der Digitalisierung der Industrie auf ökologische Nachhaltigkeit sind hingegen ambivalent. Diese kumulative Dissertation untersucht anhand von drei empirischen Studien die erwarteten und beobachteten Auswirkungen der Digitalisierung der Industrie auf ökologische Nachhaltigkeit. Ziel der Dissertation ist es, Chancen und Risiken der Digitalisierung auf verschiedenen System-Ebenen zu identifizieren und Handlungsoptionen in Politik und Industrie für eine nachhaltigere Gestaltung der Digitalisierung der Industrie abzuleiten. Ich nutze einen interdisziplinären, soziotechnischen Zugang und betrachte ausgewählte Länder des Globalen Südens (Studie 1) und das Beispiel Chinas (alle Studien). In der ersten Studie (Kapitel 2, gemeinsame Arbeit mit Marcel Matthess) untersuche ich mittels qualitativer Inhaltsanalyse Digital- und Industriestrategien aus sieben verschiedenen Ländern in Afrika und Asien auf politische Erwartungen hinsichtlich der Auswirkungen von Digitalisierung auf Nachhaltigkeit und vergleiche diese mit den erwartbaren Potenzialen der Digitalisierung für Nachhaltigkeit in den jeweiligen Länderkontexten. Die Analyse ergibt, dass die Dokumente ein breites Spektrum vager Erwartungen zum Ausdruck bringen, die sich eher auf positive indirekte Auswirkungen der Nutzung von Informations- und Kommunikationstechnologie (IKT), wie etwa auf höhere Energieeffizienz und ein verbessertes Ressourcenmanagement, und weniger auf negative direkte Auswirkungen der IKT, wie etwa auf den Stromverbrauch durch IKT, beziehen. In der zweiten Studie (Kapitel 3, gemeinsame Arbeit mit Marcel Matthess, Grischa Beier und Bing Xue) führe und analysiere ich mittels qualitativer Inhaltsanalyse Interviews mit 18 Industrie-Vertreter*innen der Elektronikindustrie aus Europa, Japan und China zu Maßnahmen der Digitalisierung in Lieferketten. Wir stellen fest, dass zwar positive Erwartungen hinsichtlich der Effekte digitaler Technologien für Nachhaltigkeit der Lieferkette bestehen, deren tatsächlicher Einsatz und beobachtete Effekte jedoch noch begrenzt sind. Interviewpartner*innen können nur wenige Beispiele aus den eigenen Unternehmen nennen, die zeigen, dass durch die Digitalisierung der Lieferkette bereits Nachhaltigkeitsziele verfolgt oder Nachhaltigkeits-Effekte, wie Ressourceneinsparungen, nachweisbar erzielt wurden. In der dritten Studie (Kapitel 4, gemeinsame Arbeit mit Peter Neuhäusler, Marcel Matthess und Melissa Dachrodt) führe ich eine ökonometrische Panel-Daten-Analyse durch. Ich untersuche den Zusammenhang zwischen dem Grad von Industrie 4.0 und dem Energieverbrauch sowie der Energieintensität in zehn Fertigungssektoren in China im Zeitraum zwischen 2006 und 2019. Die Ergebnisse deuten darauf hin, dass es insgesamt keinen signifikanten Zusammenhang zwischen dem Grad von Industrie 4.0 und dem Energieverbrauch bzw. der Energieintensität in Fertigungs-Sektoren in China gibt. Es können jedoch Unterschiede in Sub-Gruppen von Sektoren festgestellt werden. Ich stelle eine negative Korrelation von Industrie 4.0 und Energieintensität in hoch digitalisierten Sektoren fest, was auf einen Effizienz-steigernden Effekt von Industrie 4.0 hindeutet. Andererseits besteht eine positive Korrelation von Industrie 4.0 und Energieverbrauch für Sektoren mit niedrigem Energieverbrauch, was dadurch erklärt werden könnte, dass Digitalisierung, etwa die Automatisierung zuvor hauptsächlich arbeitsintensiver Sektoren, Energie erfordert und außerdem Wachstumseffekte hervorruft. Im Diskussionsteil (Kapitel 6) dieser Dissertation nutze ich das Ordnungsschema der drei Ebenen Makro, Meso und Mikro, sowie von direkten und indirekten Umwelteffekten für die Einordnung der empirischen Beobachtungen in Chancen und Risiken, etwa hinsichtlich der Wahrscheinlichkeit von Rebound-Effekten der Digitalisierung auf Mikro-, Meso- und Makro-Ebene. Ich verknüpfe die untersuchten Akteurs-Perspektiven (Politiker*innen, Industrievertreter*innen), statistischen Daten und zusätzliche Literatur über die System-Ebenen hinweg und berücksichtige dabei auch Gedanken der politischen Ökonomik, um Handlungsfelder für nachhaltige(re) digitalisierte Industrien abzuleiten. Die Dissertation leistet damit zwei übergeordnete Beiträge zum wissenschaftlichen und gesellschaftlichen Diskurs. Erstens erweitern meine drei empirischen Studien den begrenzten Forschungsstand an der Schnittstelle zwischen Digitalisierung in der Industrie und Nachhaltigkeit, insbesondere durch Berücksichtigung ausgewählter Länder im Globalen Süden und des Beispiels Chinas. Zweitens ermöglicht die Erforschung des Themas durch Daten und Methoden aus unterschiedlichen disziplinären Kontexten und unter Einnahme eines soziotechnischen Standpunkts, eine Analyse von (Pfad-)Abhängigkeiten und Unsicherheiten im soziotechnischen System über verschiedene System-Ebenen hinweg, die in bisherigen Studien häufig nicht ausreichend berücksichtigt wurden. Die Dissertation soll so eine wissenschaftlich und praktisch relevante Wissensbasis für eine werte-gleitete, auf Nachhaltigkeit ausgerichtete Gestaltung der Digitalisierung der Industrie schaffen. KW - digitalization KW - sustainable industrial development KW - Industry 4.0 KW - information and communication technologies KW - sustainable supply chain management KW - Global Value Chains KW - environmental upgrading KW - Artificial Intelligence KW - Big Data Analytics KW - Digital Rebound KW - China KW - patent KW - robot KW - sustainability KW - Künstliche Intelligenz KW - Big Data Analytics KW - China KW - Digital Rebound KW - Globale Wertschöpfungsketten KW - Industrie 4.0 KW - Digitalisierung KW - ökologisches Upgrading KW - Informations- und Kommunikationstechnologien KW - Patent KW - Roboter KW - Nachhaltigkeit KW - nachhaltige industrielle Entwicklung KW - nachhaltiges Lieferkettenmanagement KW - Industrial Internet of Things KW - Industrielles Internet der Dinge Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-613954 ER - TY - THES A1 - Gruner, David T1 - New frontiers in gyrochronology T1 - Neue Horizonte in Gyrochronologie BT - exploring the evolution of stellar rotation in open clusters and wide binaries BT - eine Untersuchung der Entwicklung von Sternrotation in offenen Sternhaufen und weiten Doppelsternsystemen N2 - Late-type stars are by far the most frequent stars in the universe and of fundamental interest to various fields of astronomy – most notably to Galactic archaeology and exoplanet research. However, such stars barely change during their main sequence lifetime; their temperature, luminosity, or chemical composition evolve only very slowly over the course of billions of years. As such, it is difficult to obtain the age of such a star, especially when it is isolated and no other indications (like cluster association) can be used. Gyrochronology offers a way to overcome this problem. Stars, just like all other objects in the universe, rotate and the rate at which stars rotate impacts many aspects of their appearance and evolution. Gyrochronology leverages the observed rotation rate of a late-type main sequence star and its systematic evolution to estimate their ages. Unlike the above-mentioned parameters, the rotation rate of a main sequence star changes drastically throughout its main sequence lifetime; stars spin down. The youngest stars rotate every few hours, whereas much older stars rotate only about once a month, or – in the case of some late M-stars – once in a hundred days. Given that this spindown is systematic (with an additional mass dependence), it gave rise to the idea of using the observed rotation rate of a star (and its mass or a suitable proxy thereof) to estimate a star’s age. This has been explored widely in young stellar open clusters but remains essentially unconstrained for stars older than the sun, and K and M stars older than 1 Gyr. This thesis focuses on the continued exploration of the spindown behavior to assess, whether gyrochronology remains applicable for stars of old ages, whether it is universal for late-type main sequence stars (including field stars), and to provide calibration mileposts for spindown models. To accomplish this, I have analyzed data from Kepler space telescope for the open clusters Ruprecht 147 (2.7 Gyr old) and M 67 (4 Gyr). Time series photometry data (light curves) were obtained for both clusters during Kepler’s K2 mission. However, due to technical limitations and telescope malfunctions, extracting usable data from the K2 mission to identify (especially long) rotation periods requires extensive data preparation. For Ruprecht 147, I have compiled a list of about 300 cluster members from the literature and adopted preprocessed light curves from the Kepler archive where available. They have been cleaned of the gravest of data artifacts but still contained systematics. After correcting them for said artifacts, I was able to identify rotation periods in 31 of them. For M 67 more effort was taken. My work on Ruprecht 147 has shown the limitations imposed by the preselection of Kepler targets. Therefore, I adopted the time series full frame image directly and performed photometry on a much higher spatial resolution to be able to obtain data for as many stars as possible. This also means that I had to deal with the ubiquitous artifacts in Kepler data. For that, I devised a method that correlates the artificial flux variations with the ongoing drift of the telescope pointing in order to remove it. This process was a large success and I was able to create light curves whose quality match and even exceede those that were created by the Kepler mission – all while operating on higher spatial resolution and processing fainter stars. Ultimately, I was able to identify signs of periodic variability in the (created) light curves for 31 and 47 stars in Ruprecht 147 and M 67, respectively. My data connect well to bluer stars of cluster of the same age and extend for the first time to stars redder than early-K and older than 1 Gyr. The cluster data show a clear flattening in the distribution of Ruprecht 147 and even a downturn for M 67, resulting in a somewhat sinusoidal shape. With that, I have shown that the systematic spindown of stars continues at least until 4 Gyr and stars continue to live on a single surface in age-rotation periods-mass space which allows gyrochronology to be used at least up to that age. However, the shape of the spindown – as exemplified by the newly discovered sinusoidal shape of the cluster sequence – deviates strongly from the expectations. I then compiled an extensive sample of rotation data in open clusters – very much including my own work – and used the resulting cluster skeleton (with each cluster forming a rip in color-rotation period-mass space) to investigate if field stars follow the same spindown as cluster stars. For the field stars, I used wide binaries, which – with their shared origin and coevality – are in a sense the smallest possible open clusters. I devised an empirical method to evaluate the consistency between the rotation rates of the wide binary components and found that the vast majority of them are in fact consistent with what is observed in open clusters. This leads me to conclude that gyrochronology – calibrated on open clusters – can be applied to determine the ages of field stars. N2 - Sterne mit späten Spektraltypen sind mit Abstand die Häufigsten im Universum und von großem Interesse für verschiedene Bereiche der Astronomie. Dabei sind insbesondere galaktische Archäologie und die Erforschung von Exoplanten zu nennen. Das Problem ist jedoch, dass sich diese Sterne nur sehr langsam entwickeln; ihre Temperatur, Helligkeit und chemische Zusammensetzung ändern kaum während ihrer langen Hauptreihenphase. Daher ist es schwierig für solche Sterne ein Alter zu bestimmen – vorallem wenn sie isoliert sind und es keine anderne Indikatoren (z.B. die Zugehörigkeit zu einem Sternhaufen) gibt. Eine Möglichkeit dieses Problem zu umgehen ist Gyrochronologie. Sterne, wie alle anderen Objekte im Universum, rotieren und die Rate, mit der sie rotieren, beeinflusst viele Aspekte ihrer Evolution. Gyrochronologie nutzt die beobachtete Rotation und ihre Änderung mit der Zeit als ein Mittel zur Altersbestimmung. Anders als zuvor genannte Parameter ändert sich die Rate, mit der Sterne rotieren, deutlich im Laufe ihrer Hauptreihenentwicklung. Sie verlangsamt sich. Junge Sterne rotieren in wenigen Stunden einmal um sich selbst – ältere brauchen dafür schon einen Monat oder gar bis zu über hundert Tage. Die Tatsache, dass das Abbremsen systematischen Gesetzmäßigkeiten unterliegt, gebar die Idee dies zu nutzen um das Alter eines Sternes zu bestimmen. Das Verhalten junger Sterne wurde ausführlich erfoscht, jedoch für die meisten Sterne älter als 1 Gyr nicht bekannt, wie sich die Rotationsraten entwickeln. Diese Arbeit fokussiert sich auf die fortgesetzte Erforschung des Abbremsens; insbesondere ob Gyrochronologie auch für ältere Sterne nutzbar ist, ob es universell für alle Sterne (inklusive Feldsterne) ist und darauf weitere Kalibrationspunkte für Abbrems-Modelle bereitzustellen. Dafür habe ich, basierend auf photometrischen Zeitserien (Lichtkurven) von Keplers K2 Programm, die offenen Sternhaufen Ruprecht 147 (2.7 Gyr alt) and M 67 (4 Gyr) untersucht. Es sind jedoch umfangreiche Schritte in der Datenverarbeitung notwendig um Fehlfunktionen und technischen Limitationen des Teleskops zu begegnen. Für Ruprecht 147 habe ich aus Literaturdaten eine Liste von 300 Haufen-zugehörigen Sternen erstellt und mit fertigreduzierte Lichtkurven aus dem Kepler Archiv kombiniert. Die gröbsten Datensystematiken wurden in diesen bereinigt, denoch sind problematische Artefakte weiterhin vorhanden. Die Arbeit an Ruprecht 147 hat die Limitationen von archivierten Kepler Daten gezeigt. Daher wurde für M 67 mehr Aufwand betrieben. Direkt basierend auf den photometrischen Auffnahmen habe ich eigene Lichtkurven erzeugt, was eine deutlich höhere räumliche Auflösung erlaubt hat. Das hieß jedoch auch, dass ich mich mit all Systematiken in Kepler Daten befassen musste. Dafür habe ich eine Methodik konzipiert, die die künstlichen Variation im aufgezeichneten Fluss mit der Position eines Sterns auf dem Detektor korreliert und daraus eine Korrektur bestimmt. Dieser Prozess war so erfolgreich, dass ich Lichtkurven kreiert habe, die in ihrer Qualität an die archivierten Daten heran kommen oder sie gar übersteigen. Nach entsprechender Korrektur der Artefakte konnte ich Rotationsperioden für 31 (in Ruprecht 147) und 47 (in M 67) Sterne identifizieren. Genau wie zuvor in jüngeren Sternhaufen gesehen, folgen auch die äelteren Sternhaufen einer klaren Sequenz im Farb-Rotations-Raum. Meine Daten schließen direkt an Ergebnisse gleichaltriger Haufen an und erweitern diese zum ersten Mal zu Sternen älter als 1 Gyr und röter als frühe K-Sterne. Meine Ergebnisse zeigen eine deutliche Abweichung von der erwarteten Entwicklung, verkörpert durch eine klare Abflachung der Sequenz für Ruprecht 147, die für M 67 eine sinusförmige Struktur annimmt. Dennoch konnte ich damit zeigen, dass sich das systematische Abbremsen der Rotation von Sterne auch bis 4 Gyr fortsetzt und Sterne sich weiterhin auf eine wohldefinierten Ebene im Farb-Rotations-Alters-Raum befinden. Das heißt auch, Gyrochronologie kann mindestens für bis zu 4 Gyr alte Sterne genutzt werden. Basierend auf meinen eigenen Ergebnissen und Literaturdaten für jüngere Sternhaufen habe ich einen Vergleich mit Feldsternen durchgeführt. Die Feldsterne für diesen Vergleich entstammen weiten Doppelsternsystemen. Deren gemeinsamer Ursprung erlaubt eine Evaluierung der inneren Konsistenz beider Sterne. Mein Vergleich hat gezeigt, dass Doppelsternsysteme mit sich selbst aber auch mit den Sternhaufen konsistent sind. Ich habe damit erstmalig gezeigt, dass sich die Rotation von Feldsternen und Haufensternen gleich entwickelt. In Konsequenz bedeutet dies auch, dass Gyrochronologie angewandt werden kann, um das Alter von Feldsternen zu bestimmen. KW - Gyrochronologie KW - gyrochronology KW - spindown KW - rotation KW - Rotation Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-615268 ER - TY - JOUR A1 - Große-Bölting, Gregor A1 - Scheppach, Lukas A1 - Mühling, Andreas T1 - The Place of Ethics in Computer Science Education JF - Hochschuldidaktik Informatik HDI 2021 (Commentarii informaticae didacticae) N2 - Ethical issues surrounding modern computing technologies play an increasingly important role in the public debate. Yet, ethics still either doesn’t appear at all or only to a very small extent in computer science degree programs. This paper provides an argument for the value of ethics beyond a pure responsibility perspective and describes the positive value of ethical debate for future computer scientists. It also provides a systematic analysis of the module handbooks of 67 German universities and shows that there is indeed a lack of ethics in computer science education. Finally, we present a principled design of a compulsory course for undergraduate students. KW - Ethics KW - Diversity KW - Social impact KW - Bachelor KW - Curriculum analysis KW - Course development Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-615982 SN - 978-3-86956-548-4 SN - 1868-0844 SN - 2191-1940 IS - 13 SP - 173 EP - 187 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - JOUR A1 - Siegeris, Juliane T1 - Attracting a new clientele for computer science with a women-only IT degree course JF - Hochschuldidaktik Informatik HDI 2021 (Commentarii informaticae didacticae) N2 - A degree course in IT and business administration solely for women (FIW) has been offered since 2009 at the HTW Berlin – University of Applied Sciences. This contribution discusses student motivations for enrolling in such a women only degree course and gives details of our experience over recent years. In particular, the approach to attracting new female students is described and the composition of the intake is discussed. It is shown that the women-only setting together with other factors can attract a new clientele for computer science. KW - Women and IT KW - STEM KW - Course marketing KW - Courses for female students KW - Curricula Development Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-615712 SN - 978-3-86956-548-4 SN - 1868-0844 SN - 2191-1940 IS - 13 SP - 157 EP - 170 PB - Universitätsverlag Potsdam CY - Potsdam ER -