TY - JOUR A1 - Prüfert, Chris A1 - Urban, Raphael David A1 - Fischer, Tillmann Georg A1 - Villatoro, José Andrés A1 - Riebe, Daniel A1 - Beitz, Toralf A1 - Belder, Detlev A1 - Zeitler, Kirsten A1 - Löhmannsröben, Hans-Gerd T1 - In situ monitoring of photocatalyzed isomerization reactions on a microchip flow reactor by IR-MALDI ion mobility spectrometry JF - Analytical and bioanalytical chemistry : a merger of Fresenius' journal of analytical chemistry, Analusis and Quimica analitica N2 - The visible-light photocatalyticE/Zisomerization of olefins can be mediated by a wide spectrum of triplet sensitizers (photocatalysts). However, the search for the most efficient photocatalysts through screenings in photo batch reactors is material and time consuming. Capillary and microchip flow reactors can accelerate this screening process. Combined with a fast analytical technique for isomer differentiation, these reactors can enable high-throughput analyses. Ion mobility (IM) spectrometry is a cost-effective technique that allows simple isomer separation and detection on the millisecond timescale. This work introduces a hyphenation method consisting of a microchip reactor and an infrared matrix-assisted laser desorption ionization (IR-MALDI) ion mobility spectrometer that has the potential for high-throughput analysis. The photocatalyzedE/Zisomerization of ethyl-3-(pyridine-3-yl)but-2-enoate (E-1) as a model substrate was chosen to demonstrate the capability of this device. Classic organic triplet sensitizers as well as Ru-, Ir-, and Cu-based complexes were tested as catalysts. The ionization efficiency of theZ-isomer is much higher at atmospheric pressure which is due to a higher proton affinity. In order to suppress proton transfer reactions by limiting the number of collisions, an IM spectrometer working at reduced pressure (max. 100 mbar) was employed. This design reduced charge transfer reactions and allowed the quantitative determination of the reaction yield in real time. Among 14 catalysts tested, four catalysts could be determined as efficient sensitizers for theE/Zisomerization of ethyl cinnamate derivativeE-1. Conversion rates of up to 80% were achieved in irradiation time sequences of 10 up to 180 s. With respect to current studies found in the literature, this reduces the acquisition times from several hours to only a few minutes per scan. KW - microchip KW - reaction monitoring KW - IR-MALDI KW - ion mobility spectrometry KW - photochemistry KW - photocatalysis KW - Olefin isomerization Y1 - 2020 U6 - https://doi.org/10.1007/s00216-020-02923-y SN - 1618-2642 SN - 1618-2650 VL - 412 IS - 28 SP - 7899 EP - 7911 PB - Springer CY - Heidelberg ER - TY - JOUR A1 - Wolf, Thomas J. A. A1 - Holzmeier, Fabian A1 - Wagner, Isabella A1 - Berrah, Nora A1 - Bostedt, Christoph A1 - Bozek, John A1 - Bucksbaum, Phil A1 - Coffee, Ryan A1 - Cryan, James A1 - Farrell, Joe A1 - Feifel, Raimund A1 - Martinez, Todd J. A1 - McFarland, Brian A1 - Mucke, Melanie A1 - Nandi, Saikat A1 - Tarantelli, Francesco A1 - Fischer, Ingo A1 - Gühr, Markus T1 - Observing Femtosecond Fragmentation Using Ultrafast X-ray-Induced Auger Spectra JF - Applied sciences N2 - Molecules often fragment after photoionization in the gas phase. Usually, this process can only be investigated spectroscopically as long as there exists electron correlation between the photofragments. Important parameters, like their kinetic energy after separation, cannot be investigated. We are reporting on a femtosecond time-resolved Auger electron spectroscopy study concerning the photofragmentation dynamics of thymine. We observe the appearance of clearly distinguishable signatures from thymines neutral photofragment isocyanic acid. Furthermore, we observe a time-dependent shift of its spectrum, which we can attribute to the influence of the charged fragment on the Auger electron. This allows us to map our time-dependent dataset onto the fragmentation coordinate. The time dependence of the shift supports efficient transformation of the excess energy gained from photoionization into kinetic energy of the fragments. Our method is broadly applicable to the investigation of photofragmentation processes. KW - ultrafast dynamics KW - Auger electron spectroscopy KW - photofragmentation KW - photochemistry Y1 - 2017 U6 - https://doi.org/10.3390/app7070681 SN - 2076-3417 VL - 7 IS - 7 PB - MDPI CY - Basel ER - TY - JOUR A1 - Matic, Aleksandar A1 - Schlaad, Helmut T1 - Thiol-ene photofunctionalization of 1,4-polymyrcene JF - Polymer international N2 - 1,4-Polymyrcene was synthesized by anionic polymerization of -myrcene and was subjected to photochemical functionalization with various thiols (i.e. methyl thioglycolate, methyl 3-mercaptopropionate, butyl 3-mercaptopropionate, ethyl 2-mercaptopropionate and 2-methyl-2-propanethiol) using benzophenone/UV light as the radical source. The yield of thiol addition to the trisubstituted double bonds of 1,4-polymyrcene decreased in the order 1 degrees thiol (ca 95%) > 2 degrees thiol (ca 80%) > 3 degrees thiol (<5%), due to the reversibility of the thiol-ene reaction. Remarkably, thiol addition to the side-chain double bonds was 8 - 10 times (1 degrees thiol) or 24 times (2 degrees thiol) faster than to the main-chain double bonds, which can be explained by the different accessibility of the double bonds and steric hindrance. Despite the use of a 10-fold excess of thiol with respect to myrcene units, the thiol-ene addition was accompanied by chain coupling reactions, which in the extreme case of 3 degrees thiol (or in the absence of thiol) resulted in the formation of insoluble crosslinked material. As an example, a methyl-thioglycolate-functionalized 1,4-polymyrcene was saponified/crosslinked to give submicron polyelectrolyte particles in dilute alkaline solution. (c) 2018 Society of Chemical Industry KW - polymyrcene KW - thiol-ene KW - photochemistry KW - regioselectivity Y1 - 2018 U6 - https://doi.org/10.1002/pi.5534 SN - 0959-8103 SN - 1097-0126 VL - 67 IS - 5 SP - 500 EP - 505 PB - Wiley CY - Hoboken ER - TY - JOUR A1 - Hardy, John G. A1 - Bertin, Annabelle A1 - Torres-Rendon, Jose Guillermo A1 - Leal-Egana, Aldo A1 - Humenik, Martin A1 - Bauer, Felix A1 - Walther, Andreas A1 - Cölfen, Helmut A1 - Schlaad, Helmut A1 - Scheibel, Thomas R. T1 - Facile photochemical modification of silk protein-based biomaterials JF - Macromolecular bioscience N2 - Silk protein-based materials show promise for application as biomaterials for tissue engineering. The simple and rapid photochemical modification of silk protein-based materials composed of either Bombyx mori silkworm silk or engineered spider silk proteins (eADF4(C16)) is reported. Radicals formed on the silk-based materials initiate the polymerization of monomers (acrylic acid, methacrylic acid, or allylamine) which functionalize the surface of the silk materials with poly(acrylic acid) (PAA), poly(methacrylic acid) (PMAA), or poly(allylamine) (PAAm). To demonstrate potential applications of this type of modification, the polymer-modified silks are mineralized. The PAA- and PMAA-functionalized silks are mineralized with calcium carbonate, whereas the PAAm-functionalized silks are mineralized with silica, both of which provide a coating on the materials that may be useful for bone tissue engineering, which will be the subject of future investigations. KW - biomaterials KW - chemical modification KW - photochemistry KW - silkworm silk KW - spider silk Y1 - 2018 U6 - https://doi.org/10.1002/mabi.201800216 SN - 1616-5187 SN - 1616-5195 VL - 18 IS - 11 PB - Wiley-VCH CY - Weinheim ER - TY - THES A1 - Czarnecki, Maciej T1 - Untersuchungen zur Synthese von (1,7)-Naphthalenophanen über eine Dehydro-DIELS-ALDER-Reaktion als Schlüsselschritt T1 - Investigations towards the synthesis of (1,7)-Naphthalenophanes via a Dehydro-DIELS-ALDER reaction as key step BT - synthetisch-technische Aspekte, Eigenschaften und Anwendungen BT - synthetic-technical aspects, properties and applications N2 - Die vorliegende Dissertation behandelt drei thematische Schwerpunkte. Im Ergebnisteil steht die chemische Synthese von sogenannten (1,7)-Naphthalenophanen im Vordergrund, die zur Substanzklasse von Cyclophanen gehören. Während zahlreiche Synthesemethoden Strategien zum Aufbau von Ringsystemen (wie z. B. von Naphthalenophanen) verfolgen, die Teil einer bereits existierenden aromatischen Struktur der Ausgangsverbindung sind, nutzen nur wenige Ansätze Reaktionen, die einen Ringschluss zum gewünschten Produkt erst im Zuge der Synthese etablieren. Eine Benzanellierung, die eine besondere Aufmerksamkeit im Arbeitskreis erfahren hat, ist die Dehydro-DIELS-ALDER-Reaktion (DDA-Reaktion). Im Rahmen dieser Arbeit konnte gezeigt werden, dass zwölf ausgewählte (1,7)-Naphthalenophane, die teilweise ringgespannt und makrozyklisch aufgebaut waren, mithilfe einer photochemischen Variante der DDA-Reaktion (PDDA-Reaktion) zugänglich gemacht werden können. Die Versuche, auf thermischem Wege (TDDA-Reaktion) (1,7)-Naphthalenophane herzustellen, misslangen. Die außergewöhnliche Reaktivität der Photoreaktanten konnte mithilfe quantenchemischer Berechnungen durch eine gefaltete Grundzustandsgeometrie erklärt werden. Darüber hinaus wurden Ringspannungen und strukturelle Spannungsindikatoren der relevanten Photoprodukte ermittelt und Trends in Abhängigkeit der Linkerlänge in den NMR-Spektren der Zielverbindungen ermittelt sowie diskutiert. Zudem zeigte eine Variation am Chromophor (Acyl-, Carbonsäure- und Carbonsäureester) der Photoreaktanten bei der Bestrahlung in Dichlormethan eine vergleichbare Photokinetik und -reaktivität. Der zweite Abschnitt dieser Dissertation ist dem Design und der Entwicklung zweier Photoreaktoren für UV-Anwendungen im kontinuierlichen Durchfluss gewidmet, da photochemische Transformationen bekanntermaßen in ihrer Skalierbarkeit limitiert sind. Im ersten Prototyp konnten mittels effizienter Parallelschaltung mit bis zu drei UV-Lampen (𝜆𝜆 = 254, 310 und 355 nm) Produktmaterialmengen von bis zu n = 188 mmol anhand eines ausgewählten Fallbeispiels erreicht werden. Im konstruktionstechnisch stark vereinfachten zweiten Photoreaktor wurden alle quarzhaltigen Elemente gegen günstigeres PLEXIGLAS® ersetzt. Das Resultat waren identische Raum-Zeit-Ausbeuten in Bezug auf das zuvor gewählte Synthesebeispiel. Demnach bietet die UV-Photochemie im kontinuierlichen Durchfluss Vorteile gegenüber der traditionellen Bestrahlung im Tauchreaktor. Hinsichtlich Reaktionszeit, Produktausbeuten und Lösemittelverbrauch ist sie synthetisch weit überlegen. Im letzten Abschnitt der Arbeit wurden diese Erkenntnisse genutzt, um biomedizinisch und pharmakologisch vielversprechende 1-Arylnaphthalen-Lignane mittels einer intramolekularen PDDA-Reaktion (IMPDDA-Reaktion) als Schlüsselschritt herzustellen. Hierzu wurden drei Konzepte erarbeitet und in der Totalsynthese von drei ausgewählten Zielstrukturen auf Basis des 1-Arylnaphthalengrundgerüsts realisiert. N2 - The content of this doctoral thesis focusses on three major thematic aspects. The first half of this work is devoted to the chemical synthesis of so-called (1,7)-naphthalenophanes, which are classified in the group of cyclophanes. Several synthetic methods consist of strategies, which are often part of an already existing aromatic unit (e.g. as in naphthalenophanes). Basic approaches where the aromatic moiety is formed during the reaction in terms of a ring-closing reaction can be rarely found. A powerful benzoanellation method which has proven suitability in the working group is the Dehydro-DIELS-ALDER reaction (DDA reaction). As part of this work twelve selected examples of partially strained and macrocyclic (1,7)-naphthalenophanes could be obtained via a photochemical variant of the DDA reaction (PDDA reaction). In contrast the thermal version (TDDA reaction) for the preparation of (1,7)-naphthalenophanes failed. The extraordinary reactivity of photo reactants originated from a folded ground-state geometry is caused by π-stacking as calculated by quantum chemical methods. In addition, ring strains and structural strain indicators of relevant photo products were calculated as well. Besides that, trends inside the corresponding product NMR spectra in dependence of the linker length were identified and discussed. Moreover, a variation of the chromophoric group (acyl, carboxylic acid and carboxylic acid ester) in the photo reactants showed comparable photokinetics and -reactivities after being irradiated in dichloromethane. The second part dealt with the design and development of two continuous-flow reactors for applications in the UV-range, since photochemical transformations are limited by their scalability. The first prototype reactor could generate via an internal numbering-up approach consisting of three lamps (𝜆𝜆 = 254, 310 und 355 nm) product material with up to n = 188.0 mmol as a selected test system showed. The second flow UV-reactor was constructionally simplified by exchanging all quarz containing elements by PLEXIGLAS®. As a result, identical space-time-yields could be obtained with the same chosen test substrate. Continuous-flow UV-photochemistry can therefore be regarded as advantageous over traditional batch photochemistry regarding reaction times, product yields and solvent waste. As a result, the last section provided insights into the synthesis of biomedically and pharmacologically relevant 1-arylnaphthalene lignanes based on an intramolecular PDDA reaction (IMPDDA reaction) as key step. For this purpose, three synthesis concepts were elaborated and applied in the total synthesis of three selected natural products consisting of an 1-arylnaphthalene skeleton. KW - Photochemie KW - Durchflusschemie KW - 1-Arylnaphthalen-Lignane KW - photochemistry KW - flow chemistry KW - 1-arylnaphthalene lignanes Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-508670 ER - TY - JOUR A1 - Weis, Philipp A1 - Hess, Andreas A1 - Kircher, Gunnar A1 - Huang, Shilin A1 - Auernhammer, Günter K. A1 - Koynov, Kaloian A1 - Butt, Hans-Jürgen A1 - Wu, Si T1 - Effects of Spacers on Photoinduced Reversible Solid-to-Liquid Transitions of Azobenzene-Containing Polymers JF - Chemistry - a European journal N2 - Photoisomerization in some azobenzene-containing polymers (azopolymers) results in reversible solid-to-liquid transitions because trans- and cis-azopolymers have different glass transition temperatures. This property enables photoinduced healing and processing of azopolymers with high spatiotemporal resolution. However, a general lack of knowledge about the influence of the polymer structure on photoinduced reversible solid-to-liquid transitions hinders the design of such novel polymers. Herein, the synthesis and photoresponsive behavior of new azopolymers with different lengths of spacers between the polymer backbone and the azobenzene group on the side chain are reported. Azopolymers with no and 20 methylene spacers did not show photoinduced solid-to-liquid transitions. Azopolymers with 6 or 12 methylene spacers showed photoinduced solid-to-liquid transitions. This study demonstrates that spacers are essential for azopolymers with photoinduced reversible solid-to-liquid transitions, and thus, gives an insight into how to design azopolymers for photoinduced healing and processing. KW - azobenzenes KW - isomerization KW - photochemistry KW - polymers KW - self-healing Y1 - 2019 U6 - https://doi.org/10.1002/chem.201902273 SN - 0947-6539 SN - 1521-3765 VL - 25 IS - 46 SP - 10946 EP - 10953 PB - Wiley-VCH CY - Weinheim ER - TY - THES A1 - Kumru, Baris T1 - Utilization of graphitic carbon nitride in dispersed media T1 - Anwendung von graphitischem Kohlenstoffnitrid in dispergierten Medien N2 - Utilization of sunlight for energy harvesting has been foreseen as sustainable replacement for fossil fuels, which would also eliminate side effects arising from fossil fuel consumption such as drastic increase of CO2 in Earth atmosphere. Semiconductor materials can be implemented for energy harvesting, and design of ideal energy harvesting devices relies on effective semiconductor with low recombination rate, ease of processing, stability over long period, non-toxicity and synthesis from abundant sources. Aforementioned criteria have attracted broad interest for graphitic carbon nitride (g-CN) materials, metal-free semiconductor which can be synthesized from low cost and abundant precursors. Furthermore, physical properties such as band gap, surface area and absorption can be tuned. g-CN was investigated as heterogeneous catalyst, with diversified applications from water splitting to CO2 reduction and organic coupling reactions. However, low dispersibility of g-CN in water and organic solvents was an obstacle for future improvements. Tissue engineering aims to mimic natural tissues mechanically and biologically, so that synthetic materials can replace natural ones in future. Hydrogels are crosslinked networks with high water content, therefore are prime candidates for tissue engineering. However, the first requirement is synthesis of hydrogels with mechanical properties that are matching to natural tissues. Among different approaches for reinforcement, nanocomposite reinforcement is highly promising. This thesis aims to investigate aqueous and organic dispersions of g-CN materials. Aqueous g-CN dispersions were utilized for visible light induced hydrogel synthesis, where g-CN acts as reinforcer and photoinitiator. Varieties of methodologies were presented for enhancing g-CN dispersibility, from co-solvent method to prepolymer formation, and it was shown that hydrogels with diversified mechanical properties (from skin-like to cartilage-like) are accessible via g-CN utilization. One pot photografting method was introduced for functionalization of g-CN surface which provides functional groups towards enhanced dispersibility in aqueous and organic media. Grafting vinyl thiazole groups yields stable additive-free organodispersions of g-CN which are electrostatically stabilized with increased photophysical properties. Colloidal stability of organic systems provides transparent g-CN coatings and printing g-CN from commercial inkjet printers. Overall, application of g-CN in dispersed media is highly promising, and variety of materials can be accessible via utilization of g-CN and visible light with simple chemicals and synthetic conditions. g-CN in dispersed media will bridge emerging research areas from tissue engineering to energy harvesting in near future. N2 - Sonnenlicht kann fossile Brennstoffe in der Energieerzeugung ersetzen und ermöglicht neben der Nutzung einer nachhaltigen Ressource dabei auch die deutliche Reduktion der Umweltbelastung in der Energieerzeugung. Die Verfügbarkeit geeigneter Energiegewinnungstechnologien hängt entscheidend von der Verfügbarkeit geeigneter Superkondensatoren (SC) ab. Ideale SC sollten sich in diesem Zusammenhang durch eine geringe Rekombinationsrate, gute Verarbeitbarkeit, Langzeitstabilität, Ungiftigkeit und die Verfügbarkeit aus nachhaltigen Ressourcen auszeichnen. Graphitisches Kohlenstoffnitrid (graphitic carbon nitride – g-CN), ein metall-freier Halbleiter, der aus nachhaltigen und in großer Menge verfügbaren Ausgangsstoffen hergestellt werden kann, ist als Material für dieses Eigenschaftsprofil hervorragend geeignet. Darüber hinaus können die Eigenschaften dieses Materials (innere Oberfläche, Bandlücke, Lichtabsorption) eingestellt werden. Daraus ergibt sich ein großes Forschungsinteresse z.B. im Bereich heterogener Katalyse, wie in der Kohlenstoffdioxidreduktion, elektrolytischen Wasserspaltung und verschiedener organischer Kupplungsreaktionen. Unglücklicherweise ist die schlechte Dispergierbarkeit von g-CN in organischen Lösungsmitteln und Wasser ein wesentlicher Hinderungsgrund für die erfolgreiche Nutzbarmachung dieser hervorragenden Eigenschaften. Das Design von Materialien, die biologisches Gewebe in seinen mechanischen und biologischen Eigenschaften nachahmen und ersetzen können, ist das Ziel der Gewebekonstruktion (Tissue Engineering – TE). Hydrogele, also Netzwerke mit hohem Wassergehalt, gelten als die vielversprechendsten Materialen in diesem Forschungsfeld. Die Herstellung von Hydrogelen, die biologischem Gewebe in seinen mechanischen Eigenschaften ähnelt gilt allerdings als äußerst schwierig und erfordert die Stabilisierung der Netzwerke. Besonders der Einsatz von Nanoverbundstrukturen (nanocomposites) erscheint in diesem Zusammenhang vielversprechend. Die vorliegende Arbeit beschäftigt sich mit der Untersuchung von g-CN in sowohl wässrigen, als auch organischen Dispersionen. Im Zuge dessen werden wässrige Dispersionen für die Synthese von Hydrogelen, bei der g-CN sowohl als Photoinitiator für die durch sichtbares Licht ausgelöste Vernetzung, als auch als Strukturverstärker fungiert. Zur Verbesserung der Dispergierbarkeit des g CN werden vielseitige Ansätze präsentiert, welche von der Verwendung von Co-Lösungsmitteln bis zur Präpolymerbildung reichen. Durch die aufgezeigten Ansätze können Hydrogele mit unterschiedlichen mechanischen Eigenschaften hergestellt werden (hautartig bis knorpelig). Darüber hinaus wird eine Ein-Topf Synthese für die Oberflächenfunktionalisierung vorgestellt, durch die die Dispergierbarkeit von g-CN in organischen und wässrigen Medien verbessert werden kann. Beispielsweise erlaubt die Oberflächenfunktionalisierung mit Vinylthiazol die Herstellung von kolloidal dispergiertem g-CN mit verbesserten photophysikalischen Eigenschaften ohne zusätzliche Additive und eröffnet damit die Möglichkeit transparenter g-CN Beschichtungen und ermöglicht die Druckbarkeit von g-CN aus handelsüblichen Tintenstrahldruckern. Die Anwendung von g-CN in dispergierten Medien ist vielversprechend, da eine große Zahl sehr vielfältiger Materialien durch die Kombination von g-CN mit sichtbarem Licht aus günstigen, nachhaltigen Ressourcen verfügbar ist. Daher ist zu erwarten, dass g-CN in dispergierten Medien verschiedene im Entstehen begriffene Forschungsfelder von TE bis zur Energiegewinnung überspannen wird. KW - polymer chemistry KW - Polymerchemie KW - photochemistry KW - Photochemie KW - colloid chemistry KW - kolloidchemie KW - hydrogels KW - Hydrogelen Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-427339 ER - TY - THES A1 - Pavashe, Prashant T1 - Synthesis and transformations of 2-thiocarbohydrates T1 - Synthese und Transformationen von 2-Thiokohlenhydraten BT - a practical approach for functionalization of thiosugars BT - ein Praktischer Zugang zur Funktionalisierung von Thiozuckern N2 - I. Ceric ammonium nitrate (CAN) mediated thiocyanate radical additions to glycals In this dissertation, a facile entry was developed for the synthesis of 2-thiocarbohydrates and their transformations. Initially, CAN mediated thiocyanation of carbohydrates was carried out to obtain the basic building blocks (2-thiocyanates) for the entire studies. Subsequently, 2-thiocyanates were reduced to the corresponding thiols using appropriate reagents and reaction conditions. The screening of substrates, stereochemical outcome and the reaction mechanism are discussed briefly (Scheme I). Scheme I. Synthesis of the 2-thiocyanates II and reductions to 2-thiols III & IV. An interesting mechanism was proposed for the reduction of 2-thiocyanates II to 2-thiols III via formation of a disulfide intermediate. The water soluble free thiols IV were obtained by cleaving the thiocyanate and benzyl groups in a single step. In the subsequent part of studies, the synthetic potential of the 2-thiols was successfully expanded by simple synthetic transformations. II. Transformations of the 2-thiocarbohydrates The 2-thiols were utilized for convenient transformations including sulfa-Michael additions, nucleophilic substitutions, oxidation to disulfides and functionalization at the anomeric position. The diverse functionalizations of the carbohydrates at the C-2 position by means of the sulfur linkage are the highlighting feature of these studies. Thus, it creates an opportunity to expand the utility of 2-thiocarbohydrates for biological studies. Reagents and conditions: a) I2, pyridine, THF, rt, 15 min; b) K2CO3, MeCN, rt, 1 h; c) MeI, K2CO3, DMF, 0 °C, 5 min; d) Ac2O, H2SO4 (1 drop), rt, 10 min; e) CAN, MeCN/H2O, NH4SCN, rt, 1 h; f) NaN3, ZnBr2, iPrOH/H2O, reflux, 15 h; g) NaOH (1 M), TBAI, benzene, rt, 2 h; h) ZnCl2, CHCl3, reflux, 3 h. Scheme II. Functionalization of 2-thiocarbohydrates. These transformations have enhanced the synthetic value of 2-thiocarbohydrates for the preparative scale. Worth to mention is the Lewis acid catalyzed replacement of the methoxy group by other nucleophiles and the synthesis of the (2→1) thiodisaccharides, which were obtained with complete β-selectivity. Additionally, for the first time, the carbohydrate linked thiotetrazole was synthesized by a (3 + 2) cycloaddition approach at the C-2 position. III. Synthesis of thiodisaccharides by thiol-ene coupling. In the final part of studies, the synthesis of thiodisaccharides by a classical photoinduced thiol-ene coupling was successfully achieved. Reagents and conditions: 2,2-Dimethoxy-2-phenylacetophenone (DPAP), CH2Cl2/EtOH, hv, rt. Scheme III. Thiol-ene coupling between 2-thiols and exo-glycals. During the course of investigations, it was found that the steric hindrance plays an important role in the addition of bulky thiols to endo-glycals. Thus, we successfully screened the suitable substrates for addition of various thiols to sterically less hindered alkenes (Scheme III). The photochemical addition of 2-thiols to three different exo-glycals delivered excellent regio- and diastereoselectivities as well as yields, which underlines the synthetic potential of this convenient methodology. N2 - I. Cerammoniumnitrat (CAN) vermittelte Thiocyanat Radikaladditionen an Glycale In dieser Dissertation wurde ein einfacher synthetischer Zugang zu 2-Thiokohlenhydraten und dessen Transformationsprodukten entwickelt. Zu Beginn wurden CAN vermittelte Funktionalisierungen von Kohlenhydraten mit Thiocyanat durchgeführt, um die notwendigen Ausgangsverbindungen (2-Thiocyanate) für die weiteren Studien zu erhalten. Im Folgenden wurden diese 2-Thiocyanate mit entsprechenden Reagenzien unter geeigneten Reduktionsbedingungen zu den Thiolen reduziert. Das Screening der Substrate, der stereochemische Verlauf und der Reaktionsmechanismus wird kurz diskutiert (Schema I). Schema I. Synthese der 2-Thiocyanate II und Reduktionen zu den 2-Thiolen III & IV. Es wurde ein interessanter Mechanismus für die Reduktion der 2-Thiocyanate II zu den 2-Thiolen III via Bildung von Disulfid-Zwischenstufen vorgeschlagen. Die wasserlöslichen freien Thiole IV wurden durch Spaltung der Thiocyanat- und Benzylgruppen in einem Einzelschritt freigesetzt. Im darauf folgenden Teil der Arbeit wurde das synthetische Potenzial der 2-Tiole erfolgreich durch einfache synthetische Transformationen erweitert. II. Transformationen der 2-Thiokohlenhydrate Die 2-Thiole wurden für die Ausführung praktischer Transformationen eingesetzt, die Sulfa-Michael Additionen, nukleophile Substitutionen, Oxidationen zu Disulfiden und Funktionalisierungen an der anomeren Position beinhalten. Die mannigfaltigen Funktionalisierungen der Kohlenhydrate an den C-2 Positionen mittels der Schwefel Gruppe ist das hervortretende Merkmal dieser Arbeit. Reagenzien und Reaktionsbedingungen: a) I2, Pyridin, THF, rt, 15 min; b) K2CO3, MeCN, rt, 1 h; c) MeI, K2CO3, DMF, 0 °C, 5 min; d) Ac2O, H2SO4 (1 Tropfen), rt, 10 min; e) CAN, MeCN/H2O, NH4SCN, rt, 1 h; f) NaN3; ZnBr2; iPrOH/H2O, Rückfluss 15 h; g) NaOH (1 M), TBAI, Benzol, rt 2 h; h) ZnCl2, CHCl3, Rückfluss, 3 h. Schema II. Funktionalisierungen von 2-Thiokohlenhydraten Daraus eröffnet sich die Möglichkeit, den Nutzwert von 2-Thiokohlenhydraten auf biologische Studien auszuweiten. Diese Transformationen haben den synthetischen Wert von 2-Thiokohlenhydraten für den präparativen Maßstab gesteigert. Hervorzuheben ist hier der Lewis Säure katalysierte Austausch der Methoxygruppe durch weitere Nukleophile und die Synthese von (2→1) Thiodisacchariden, die mit quantitativer β-Selektivität erhalten wurden. Zusätzlich wurde zum ersten Mal ein Zucker gebundenes Thiotetrazol über eine (3+2) Cycloaddition an der C-2 Position synthetisiert. III. Synthese von Thiodisacchariden durch Thiol-En-Kopplungen Im letzten Teil der Arbeit gelang die Synthese von Thiodisacchariden durch eine klassische Thiol-En-Kopplung. Reagenzien und Reaktionsbedingungen: 2,2-Dimethoxy-2-phenylacetophenone (DPAP), CH2Cl2/EtOH, hv, rt. Schema III. Thiol-En-Kopplungen zwischen 2-Thiolen und exo-Glycalen. Im Verlauf der Untersuchungen wurde aufgezeigt, dass die räumlische Hinderung bei der Addition von sterisch anspruchsvollen 2-Thiolen an endo-Glycale eine wichtige Rolle spielt. Dazu erprobten wir geeignete Substrate zur Addition von 2-Thiolen an sterisch wenig anspruchsvolle Alkene (Schema III). Die photochemische Addition der 2-Thiole an drei verschiedene exo-Glycale lieferte exzellente Regio- und Diastereoselektivitäten und Ausbeuten, was das synthetische Potenzial dieser bequem durchführbaren Methodik unterstreicht. KW - carbohydrates KW - 2-Thiodisaccharides KW - radical reactions KW - Ceric Ammonium Nitrate (CAN) KW - photochemistry KW - Kohlenhydrate KW - 2-Thiodisaccharide KW - Radikalreaktionen KW - Cer Ammonium Nitrat (CAN) KW - Photochemie Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-397739 ER - TY - JOUR A1 - Goebel, Ronald A1 - Hesemann, Peter A1 - Friedrich, Alwin A1 - Rothe, Regina A1 - Schlaad, Helmut A1 - Taubert, Andreas T1 - Modular thiol-ene chemistry approach towards mesoporous silica monoliths with organically modified pore walls JF - Chemistry - a European journal N2 - The surface modification of mesoporous silica monoliths through thiol-ene chemistry is reported. First, mesoporous silica monoliths with vinyl, allyl, and thiol groups were synthesized through a sol-gel hydrolysis-poly-condensation reaction from tetramethyl orthosilicate (TMOS) and vinyltriethoxysilane, allyltriethoxysilane, and (3-mercaptopropyl) trimethoxysilane, respectively. By variation of the molar ratio of the comonomers TMOS and functional silane, mesoporous silica objects containing different amounts of vinyl, allyl, and thiol groups were obtained. These intermediates can subsequently be derivatized through radical photoaddition reactions either with a thiol or an olefin, depending on the initial pore wall functionality, to yield silica monoliths with different pore-wall chemistries. Nitrogen sorption, small-angle X-ray scattering, solid-state NMR spectroscopy, elemental analysis, thermogravimetric analysis, and redox titration demonstrate that the synthetic pathway influences the morphology and pore characteristics of the resulting monoliths and also plays a significant role in the efficiency of functionalization. Moreover, the different reactivity of the vinyl and allyl groups on the pore wall affects the addition reaction, and hence, the degree of the pore-wall functionalization. This report demonstrates that thiol-ene photoaddition reactions are a versatile platform for the generation of a large variety of organically modified silica monoliths with different pore surfaces. KW - mesoporous materials KW - photochemistry KW - sol-gel processes KW - surface chemistry Y1 - 2014 U6 - https://doi.org/10.1002/chem.201403982 SN - 0947-6539 SN - 1521-3765 VL - 20 IS - 52 SP - 17579 EP - 17589 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Luo, Ying A1 - Utecht, Manuel Martin A1 - Dokic, Jadranka A1 - Korchak, Sergey A1 - Vieth, Hans-Martin A1 - Haag, Rainer A1 - Saalfrank, Peter T1 - Cis-trans isomerisation of substituted aromatic imines a comparative experimental and theoretical study JF - ChemPhysChem : a European journal of chemical physics and physical chemistry N2 - The cis-trans isomerisation of N-benzylideneaniline (NBA) and derivatives containing a central C=N bond has been investigated experimentally and theoretically. Eight different NBA molecules in three different solvents were irradiated to enforce a photochemical trans (hv) -> cis isomerisation and the kinetics of the thermal backreaction cis (Delta)-> trans were determined by NMR spectroscopy measurements in the temperature range between 193 and 288 K. Theoretical calculations using density functional theory and Eyring transition-state theory were carried out for 12 different NBA species in the gas phase and three different solvents to compute thermal isomerisation rates of the thermal back reaction. While the computed absolute rates are too large, they reveal and explain experimental trends. Time-dependent density functional theory provides optical spectra for vertical transitions and excitation energy differences between trans and cis forms. Together with isomerisation rates, the latter can be used to identify "optimal switches" with good photochromicity and reasonable thermal stability. KW - density functional calculations KW - imines KW - isomerization KW - photochemistry KW - thermochemistry Y1 - 2011 U6 - https://doi.org/10.1002/cphc.201100179 SN - 1439-4235 VL - 12 IS - 12 SP - 2311 EP - 2321 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Füchsel, Gernot A1 - Tremblay, Jean Christophe A1 - Klamroth, Tillmann A1 - Saalfrank, Peter T1 - Selective excitation of molecule-surface vibrations in H2 and D2 dissociatively adsorbed on Ru(0001) JF - Israel journal of chemistry N2 - In this contribution we report about the selective vibrational excitation of H2 and D2 on Ru(0001) as an example for nonadiabatic coupling of an open quantum system to a dissipative environment. We investigate the possibility of achieving state-selective vibrational excitations of H2 and D2 adsorbed on a Ru(0001) surface using picosecond infrared laser pulses. The systems behavior is explored using pulses that are rationally designed and others that are optimized using a time-local variant of Optimal Control Theory. The effects of dissipation on the laser-driven dynamics are studied using the reduced-density matrix formalism. The non-adiabatic couplings between adsorbate and surface are computed perturbatively, for which our recently introduced state-resolved anharmonic rate model is used. It is shown that mode- and state-selective excitation can be achieved in the absence of dissipation when using optimized laser pulses. The inclusion of dissipation in the model reduces the state selectivity and the population transfer yield to highly excited states. In this case, mode activation is most effectively realized by a rational pulse of carefully chosen duration rather than by a locally optimized pulse. KW - dissipative dynamics KW - photochemistry KW - quantum control KW - surface chemistry Y1 - 2012 U6 - https://doi.org/10.1002/ijch.201100097 SN - 0021-2148 VL - 52 IS - 5 SP - 438 EP - 451 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Floss, Gereon A1 - Granucci, Giovanni A1 - Saalfrank, Peter T1 - Surface hopping dynamics of direct trans -> cis photoswitching of an azobenzene derivative in constrained adsorbate geometries JF - The journal of chemical physics : bridges a gap between journals of physics and journals of chemistr N2 - With ongoing miniaturization of electronic devices, the need for individually addressable, switchable molecules arises. An example are azobenzenes on surfaces which have been shown to be switchable between trans and cis forms. Here, we examine the "direct" (rather than substrate-mediated) channel of the trans -> cis photoisomerization after pi pi* excitation of tetra-tert-butyl-azobenzene physisorbed on surfaces mimicking Au(111) and Bi(111), respectively. In spirit of the direct channel, the electronic structure of the surface is neglected, the latter merely acting as a rigid platform which weakly interacts with the molecule via Van-der-Waals forces. Starting from thermal ensembles which represent the trans-form, sudden excitations promote the molecules to pi pi*-excited states which are non-adiabatically coupled among themselves and to a n pi*-excited and the ground state, respectively. After excitation, relaxation to the ground state by internal conversion takes place, possibly accompanied by isomerization. The process is described here by "on the fly" semiclassical surface hopping dynamics in conjunction with a semiempirical Hamiltonian (AM1) and configuration-interaction type methods. It is found that steric constraints imposed by the substrate lead to reduced but non-vanishing, trans -> cis reaction yields and longer internal conversion times than for the isolated molecule. Implications for recent experiments for azobenzenes on surfaces are discussed. KW - AM1 calculations KW - bismuth KW - configuration interactions KW - excited states KW - gold KW - isomerisation KW - organic compounds KW - photochemistry KW - van der Waals forces Y1 - 2012 U6 - https://doi.org/10.1063/1.4769087 SN - 0021-9606 VL - 137 IS - 23 PB - American Institute of Physics CY - Melville ER -