TY - THES A1 - Knoop, Mats Timothy T1 - Neue Polyacrylnitril-basierte, schmelzspinnbare Präkursoren für Carbonfasern N2 - Diese Arbeit zu Grunde liegenden Forschung zielte darauf ab, neue schmelzbare Acrylnitril-Copolymere zu entwickeln. Diese sollten im Anschluss über ein Schmelzspinnverfahren zur Chemiefaser geformt und im letzten Schritt zur Carbonfaser konvertiert werden. Zu diesem Zweck wurden zunächst orientierende Untersuchungen an unterschiedlichen Copolymeren des Acrylnitril aus Lösungspolymerisation durchgeführt. Die Untersuchungen zeigten, dass elektrostatische Wechselwirkungen besser als sterische Abschirmung dazu geeignet sind, Schmelzbarkeit unterhalb der Zersetzungstemperatur von Polyacrylnitril zu bewirken. Aus der Vielzahl untersuchter Copolymere stellten sich jene mit Methoxyethylacrylat (MEA) als am effektivsten heraus. Für diese Copolymere wurden sowohl die Copolymerisationsparameter bestimmt als auch die grundlegende Kinetik der Lösungspolymerisation untersucht. Die Copolymere mit MEA wurden über Schmelzspinnen zur Faser umgeformt und diese dann untersucht. Hierbei wurden auch Einflüsse verschiedener Parameter, wie z.B. die der Molmasse, auf die Fasereigenschaften und -herstellung untersucht. Zuletzt wurde ein Heterophasenpolymerisationsverfahren zur Herstellung von Copolymeren aus AN/MEA entwickelt; dadurch konnten die Materialeigenschaften weiter verbessert werden. Zur Unterdrückung der thermoplastischen Eigenschaften der Fasern wurde ein geeignetes Verfahren entwickelt und anschließend die Konversion zu Carbonfasern durchgeführt. N2 - The aim of this work was to develop new meltable acrylonitrile co-polymers. Those should be processed into a fiber via melt-spinning, and finally be converted into carbon fibers. Various co-polymers of acrylonitrile were synthesized by solution polymerization. The investigations showed that electrostatic interactions are more effective than steric shielding for achieving meltability of co-polymers of acrylonitrile. Out of the wide range of co-polymers prepared, those with the co-monomer methoxyethylacrylate were the most effective ones. For these co-polymers copolymerization parameters and basic kinetics were investigated. The co-polymers were processed into fibers via melt-spinning. The influence of various parameters such as molar mass on the process and the mechanical properties of the fibers was studied. Subsequently, a new emulsion polymerization process for the synthesis of the co-polymers was developed, resulting in further improved material properties. Finally a process for deactivation of thermoplasticity by chemical treatment was developed. T2 - Novel meltable polyacrylonitrile precursor for carbon fibres KW - schmelzbares PAN KW - PAN Emulsionspolymerisation KW - meltable PAN KW - Carbonfaserprecursor KW - carbon fibre KW - precursor Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-103972 ER - TY - THES A1 - Trautmann, Michael T1 - Neue Polystyrolharze mit Sulfoxid-Ankergruppen für die Festphasenextraktion von Platin und Ruthenium aus salzsauren Lösungen Y1 - 2016 ER - TY - THES A1 - Friese, Viviane A. T1 - Solvato-, vapo, mechanochromic and luminescent behavior of Rhodium, Platinum and Gold complexes and their coordination polymers Y1 - 2016 ER - TY - THES A1 - Frieß, Fabian T1 - Shape-memory polymer micronetworks Y1 - 2016 ER - TY - THES A1 - Hildebrand, Viet T1 - Twofold switchable block copolymers based on new polyzwitterions T1 - Neue Polyzwitterionbasierte Blockcopolymere mit „Schizophrenem Verhalten“ N2 - In complement to the well-established zwitterionic monomers 3-((2-(methacryloyloxy)ethyl)dimethylammonio)propane-1-sulfonate (“SPE”) and 3-((3-methacrylamidopropyl)dimethylammonio)propane-1-sulfonate (“SPP”), the closely related sulfobetaine monomers were synthesized and polymerized by reversible addition-fragmentation chain transfer (RAFT) polymerization, using a fluorophore labeled RAFT agent. The polyzwitterions of systematically varied molar mass were characterized with respect to their solubility in water, deuterated water, and aqueous salt solutions. These poly(sulfobetaine)s show thermoresponsive behavior in water, exhibiting upper critical solution temperatures (UCST). Phase transition temperatures depend notably on the molar mass and polymer concentration, and are much higher in D2O than in H2O. Also, the phase transition temperatures are effectively modulated by the addition of salts. The individual effects can be in parts correlated to the Hofmeister series for the anions studied. Still, they depend in a complex way on the concentration and the nature of the added electrolytes, on the one hand, and on the detailed structure of the zwitterionic side chain, on the other hand. For the polymers with the same zwitterionic side chain, it is found that methacrylamide-based poly(sulfobetaine)s exhibit higher UCST-type transition temperatures than their methacrylate analogs. The extension of the distance between polymerizable unit and zwitterionic groups from 2 to 3 methylene units decreases the UCST-type transition temperatures. Poly(sulfobetaine)s derived from aliphatic esters show higher UCST-type transition temperatures than their analogs featuring cyclic ammonium cations. The UCST-type transition temperatures increase markedly with spacer length separating the cationic and anionic moieties from 3 to 4 methylene units. Thus, apparently small variations of their chemical structure strongly affect the phase behavior of the polyzwitterions in specific aqueous environments. Water-soluble block copolymers were prepared from the zwitterionic monomers and the non-ionic monomer N-isopropylmethacrylamide (“NIPMAM”) by the RAFT polymerization. Such block copolymers with two hydrophilic blocks exhibit twofold thermoresponsive behavior in water. The poly(sulfobetaine) block shows an UCST, whereas the poly(NIPMAM) block exhibits a lower critical solution temperature (LCST). This constellation induces a structure inversion of the solvophobic aggregate, called “schizophrenic micelle”. Depending on the relative positions of the two different phase transitions, the block copolymer passes through a molecularly dissolved or an insoluble intermediate regime, which can be modulated by the polymer concentration or by the addition of salt. Whereas, at low temperature, the poly(sulfobetaine) block forms polar aggregates that are kept in solution by the poly(NIPMAM) block, at high temperature, the poly(NIPMAM) block forms hydrophobic aggregates that are kept in solution by the poly(sulfobetaine) block. Thus, aggregates can be prepared in water, which switch reversibly their “inside” to the “outside”, and vice versa. N2 - Diese Arbeit befasst sich mit der Synthese und Charakterisierung von doppelt thermisch-responsiven Blockcopolymeren mit einem polaren nicht-ionischen Block (der einen LCST-Übergang in wässriger Lösung induziert) und einem zwitterionischen Block (der einen UCST-Übergang aufweisen soll), der durch Salzzusatz über einen weiten Temperaturbereich modulierbar ist. Dafür wurden geeignete zwitterionische Polymer¬blöcke identifiziert und hergestellt, die ein derartiges Löslichkeitsprofil aufweisen. Da bislang nur relativ wenige Poly-sulfobetaine beschrieben sind und entsprechend das wässrige Phasenverhalten nur für einzelne ausgewählte Polymere bekannt ist, wurde ein Grundverständnis von chemischer Struktur und Phasen¬übergangs¬verhalten durch eine systematische Variation des Substitutionsmusters angestrebt. Die als geeignet erkannten Sulfobetain-Monomere wurden mit dem nicht-ionischen Monomer N-Isopropyl-methacrylamid („NIPMAM“) zu Blockcopolymeren von unterschiedlicher Größe und Blocklängen zusammengefügt. Die neuen Blockcopolymere wurden anschließend bezüglich der Lage der Phasenübergänge mit Trübheitsmessungen untersucht. Es wurden 2 Serien neuer zwitterionischer Monomere synthetisiert, deren Struktur den sehr gut untersuchten 3-((2-(methacryloyloxy)ethyl)dimethylammonio)propane-1-sulfonate („SPE“) und 3-((3-methacrylamidopropyl)dimethylammonio)propane-1-sulfonate („SPP“) ähnlich ist. Aus den Monomeren wurden fluoreszenz-markierte Homopolymere mit unterschiedlichen Molmassen mittels der Reversiblen Additions-Fragmentierungs Kettenübertragungs (RAFT) – Polymerisation unter Verwendung eines geeigneten RAFT Reagenzes synthetisiert. Die Poly¬sulfobetaine wurden bezüglich ihrer Löslichkeit in Wasser, in deuteriertem Wasser und in Salzlösungen untersucht. Ihr wässriges Phasenverhalten mit einem UCST-Übergang ist stark abhängig von ihrer Molmasse und von der Polymerkonzentration der untersuchten Lösung. Auffällig ist, dass die Phasenübergangstemperatur in D2O deutlich höher liegt als in H2O. Des Weiteren konnten die Löslichkeit und Phasen-übergangstemperatur durch Salzzusatz effektiv moduliert werden. Prinzipiell stellte sich bei den untersuchten Anionen heraus, dass das Einsalzen bzw. das Aussalzen der empirischen Hofmeister Serie folgt. Dabei hängen die individuellen Effekte sehr stark von der Konzentration und von der Art des Salzes, aber auch in nicht-trivialer Weise von der detaillierten zwitterionischen Struktur stark ab. Durch die systematische Variation der Monomerstruktur wurden interessante Tendenzen offenbar. Die Methacrylamid-basierte Polysulfobetaine besitzen eine höhere Phasenübergangstemperatur als ihre Methacrylat-basierten Analoga. Die Vergrößerung der Distanz zwischen Polymerrückrat und der zwitterionischen Gruppe von 2 auf 3 Methylengruppen führt zu einer Erniedrigung der Phasenübergangstemperatur. Polysulfobetaine mit aliphatischen Resten (Methyl-gruppen) am Ammonium-Ion haben eine höhere Phasenübergangstemperatur als ihre Analoga, in denen der Ammonium-Stickstoff Teil eines Heterozyklus ist. Als letzte Strukturvariable wurde die Distanz zwischen Kation und Anion von 3 auf 4 Methylengruppen vergrößert; diese Änderung führt zu einer massiven Erhöhung der Phasenübergangstemperatur. Die Polysulfobetaine wurden verwendet, um mit dem nicht-ionischen Monomer NIPMAM wasserlösliche Blockcopolymere mittels der RAFT Polymerisation herzustellen. Diese Blockcopolymere besitzen doppelt thermisch-responsives Verhalten (mit einem UCST- und einem LCST-Übergang). Die Besonderheit einer solchen Konstellation ist, dass eine Strukturinversion der solvophoben Aggregate induziert werden kann. Daher werden solche Blockcopolymer-Assoziate auch als „schizophrene Mizellen“ bezeichnet. Je nach der relativen Lage der beiden Phasenübergänge, die sich durch Polymerkonzentration oder durch Salzzusatz einstellen lässt, läuft die Strukturinversion über ein molekular gelöstes oder über ein unlösliches Zwischenstadium ab. Der Polysulfobetain-Block bildet bei niedriger Temperatur Aggregate, die durch den gelösten poly(NIPMAM)-Block in Lösung gehalten werden. Dahingegen bildet der poly(NIPMAM)-Block bei hoher Temperatur Aggregate, welche ihrerseits durch den gelösten Polysulfobetain-Block in Lösung gehalten werden. Somit werden „schizophrene“ Aggregate in Wasser erzeugt, die fähig sind, reversibel ihr „Inneres“ nach „Außen“ und umgekehrt zu schalten durch Nutzen eines einfachen thermischen Impulses. KW - switchable block copolymer KW - polyzwitterion KW - polysulfobetaine KW - thermoresponsive polymers KW - schizophrenic behavior KW - LCST and UCST KW - electrolyte sensitivity KW - zweifach schaltbare Blockcopolymere KW - Polyzwitterion KW - Polysulfobetaine KW - thermoresponsive Polymere KW - schizophrenes Verhalten KW - LCST und UCST KW - Elektrolytempfindlichkeit Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-101372 ER - TY - THES A1 - Steeples, Elliot T1 - Amino acid-derived imidazolium salts: platform molecules for N-Heterocyclic carbene metal complexes and organosilica materials T1 - Imidazolium-Salze aus Aminosäure: Bausteine für N-Heterozyklische-Carben Metallkomplexe und Organosilicamaterialien N2 - In the interest of producing functional catalysts from sustainable building-blocks, 1, 3-dicarboxylate imidazolium salts derived from amino acids were successfully modified to be suitable as N-Heterocyclic carbene (NHC) ligands within metal complexes. Complexes of Ag(I), Pd(II), and Ir(I) were successfully produced using known procedures using ligands derived from glycine, alanine, β-alanine and phenylalanine. The complexes were characterized in solid state using X-Ray crystallography, which allowed for the steric and electronic comparison of these ligands to well-known NHC ligands within analogous metal complexes. The palladium complexes were tested as catalysts for aqueous-phase Suzuki-Miyaura cross-coupling. Water-solubility could be induced via ester hydrolysis of the N-bound groups in the presence of base. The mono-NHC–Pd complexes were seen to be highly active in the coupling of aryl bromides with phenylboronic acid; the active catalyst of which was determined to be mostly Pd(0) nanoparticles. Kinetic studies determined that reaction proceeds quickly in the coupling of bromoacetophenone, for both pre-hydrolyzed and in-situ hydrolysis catalyst dissolution. The catalyst could also be recycled for an extra run by simply re-using the aqueous layer. The imidazolium salts were also used to produce organosilica hybrid materials. This was attempted via two methods: by post-grafting onto a commercial organosilica, and co-condensation of the corresponding organosilane. The co-condensation technique harbours potential for the production of solid-support catalysts. N2 - Um Katalysatoren aus nachhaltigen Chemikalien herzustellen, wurden 1,3-Dicarbonsäure-Imidazolium-Salze, welche aus Aminosäuren synthetisiert wurden als N-heterozyklische-Carben-Liganden (NHC) in Metallkomplexen modifiziert. Liganden aus Glycin, Alanin, β-Alanin und Phenylalanin wurden wiederum genutzt, um Metallkomplexe aus Silber(I), Palladium(II) und Iridium(I) darzustellen. Alle Komplexverbindungen wurden mit Röntgenkristallographie charakterisiert. Die Palladiumkomplexe wurden als Katalysatoren in der Suzuki-Miyaura Reaktion eingesetzt. Durch zusätzliche Hydrolyse der Ester-Gruppen konnte eine gute Wasserlöslichkeit erreicht werden. Die hohe Aktivität der Mono-NHC–Palladium-Komplexe konnte bei der Kupplung von Arylbromiden mit Phenylboronsäuren aufgezeigt werden. Die aktive Spezies wurde hauptsächlich Pd(0) Nanopartikeln zugeschrieben. Nach erfolgreichem Recycling konnte der Katalysator noch einmal wiederverwendet werden. Die Imidazolium-Salze wurden ebenfalls herangezogen, um Organosilicamaterialien zu synthetisieren. Die Herstellung wurde durch zwei Methoden erreicht. Zum einen durch nachträgliches Aufbringen auf kommerzielle Siliziummaterialien, sowie durch Co-Kondensation auf das entsprechende Organosilan. Diese Co-Kondensation birgt Potential zur Herstellung von festen Trägerkatalysatoren. KW - synthesis KW - Synthese KW - sustainable chemistry KW - nachhaltige Chemie KW - organometallics KW - Metallorganischen KW - water KW - Wasser Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-101861 ER - TY - THES A1 - Bressel, Lena T1 - Bedeutung der abhängigen Streuung für die optischen Eigenschaften hochkonzentrierter Dispersionen Y1 - 2016 ER - TY - THES A1 - Pampel, Jonas T1 - Ionothermal carbon materials T1 - Ionothermale Kohlenstoffmaterialien BT - advanced synthesis and electrochemical applications BT - erweiterte Synthese und elektrochemische Anwendungen N2 - Alternative concepts for energy storage and conversion have to be developed, optimized and employed to fulfill the dream of a fossil-independent energy economy. Porous carbon materials play a major role in many energy-related devices. Among different characteristics, distinct porosity features, e.g., specific surface area (SSA), total pore volume (TPV), and the pore size distribution (PSD), are important to maximize the performance in the final device. In order to approach the aim to synthesize carbon materials with tailor-made porosity in a sustainable fashion, the present thesis focused on biomass-derived precursors employing and developing the ionothermal carbonization. During the ionothermal carbonization, a salt melt simultaneously serves as solvent and porogen. Typically, eutectic mixtures containing zinc chloride are employed as salt phase. The first topic of the present thesis addressed the possibility to precisely tailor the porosity of ionothermal carbon materials by an experimentally simple variation of the molar composition of the binary salt mixture. The developed pore tuning tool allowed the synthesis of glucose derived carbon materials with predictable SSAs in the range of ~ 900 to ~ 2100 m2 g-1. Moreover, the nucleobase adenine was employed as precursor introducing nitrogen functionalities in the final material. Thereby, the chemical properties of the carbon materials are varied leading to new application fields. Nitrogen doped carbons (NDCs) are able to catalyze the oxygen reduction reaction (ORR) which takes place on the cathodic site of a fuel cell. The herein developed porosity tailoring allowed the synthesis of adenine derived NDCs with outstanding SSAs of up to 2900 m2 g-1 and very large TPV of 5.19 cm3 g-1. Furthermore, the influence of the porosity on the ORR could be directly investigated enabling the precise optimization of the porosity characteristics of NDCs for this application. The second topic addressed the development of a new method to investigate the not-yet unraveled mechanism of the oxygen reduction reaction using a rotating disc electrode setup. The focus was put on noble-metal free catalysts. The results showed that the reaction pathway of the investigated catalysts is pH-dependent indicating different active species at different pH-values. The third topic addressed the expansion of the used salts for the ionothermal approach towards hydrated calcium and magnesium chloride. It was shown that hydrated salt phases allowed the introduction of a secondary templating effect which was connected to the coexistence of liquid and solid salt phases. The method enabled the synthesis of fibrous NDCs with SSAs of up to 2780 m2 g-1 and very large TPV of 3.86 cm3 g-1. Moreover, the concept of active site implementation by a facile low-temperature metalation employing the obtained NDCs as solid ligands could be shown for the first time in the context of ORR. Overall, the thesis may pave the way towards highly porous carbon with tailor-made porosity materials prepared by an inexpensive and sustainable pathway, which can be applied in energy related field thereby supporting the needed expansion of the renewable energy sector. N2 - Alternative Konzepte für Energiespeicherung und –umwandlung müssen entwickelt, optimiert und praktisch angewendet werden, um den Traum einer erdölunabhängigen Energiewirtschaft zu realisieren. Poröse Kohlenstoffmaterialien spielen eine bedeutende Rolle in vielen energierelevanten Anwendungen. Speziell die porösen Eigenschaften des Kohlenstoffs, wie die spezifische Oberfläche (engl. specific surface area: SSA), das totale Porenvolumen (engl. total pore volume: TPV) und die Porengrößenverteilung, sind von großer Bedeutung für eine Maximierung der Leistung in der Endanwendung. Die vorliegende Arbeit konzentrierte sich auf den Einsatz und die Weiterentwicklung der ionothermalen Karbonisierung ausgehend von biomassebasierten Präkursoren, um eine nachhaltige Synthese hochporöser Kohlenstoffe mit einstellbarer Porosität zu ermöglichen. In der ionothermalen Synthese fungieren Salzschmelzen simultan als Lösungsmittel und Porogen während der Karbonisierung. Als Salzphase werden hierbei häufig eutektische Zinkchloridhaltige binäre Salzmischungen verwendet. In der vorliegenden Arbeit wurde im ersten Schritt die Variation der molaren Zusammensetzung der binären Salzphase als neue Methode eingeführt, um eine kontinuierliche Veränderung der Porosität des synthetisierten Kohlenstoffs zu bewirken. Diese Methode erlaubte die Synthese von Glukose-basierten Kohlenstoffen mit einstellbarer SSA zwischen ~ 900 und ~ 2100 m2 g-1. Des Weiteren wurde die Nukleinbase Adenin als Präkursor verwendet, wodurch eine Stickstoffdotierung des finalen Kohlenstoffmaterials erreicht wurde. Die damit einhergehende Veränderung der chemischen Eigenschaften des Materials führt zu neuen Anwendungsbereichen. Stickstoffdotierte Kohlen (engl. nitrogen doped carbons: NDCs) können beispielsweise die Sauerstoffreduktion katalysieren, welche auf der Kathodenseite der Brennstoffzelle abläuft. Das entwickelte Verfahren zur Einstellung der Porosität erlaubte einerseits die Synthese von Adenin-basierten NDCs mit beeindruckenden SSAs von bis zu 2900 m2 g-1 und extrem hohen TPVs von bis zu 5,19 cm3 g-1. Andererseits konnte der Einfluss der Porosität auf die Sauerstoffreduktion direkt untersucht und infolge dessen die Porosität der NDCs für diese Anwendung optimiert werden. Im zweiten Schritt wurde ein neues Verfahren entwickelt, um mittels der rotierenden Scheibenelektrode den noch nicht geklärten Mechanismus der Sauerstoffreduktion zu untersuchen, vor allem in Bezug auf edelmetallfreie Katalysatoren. Die Ergebnisse zeigten, dass der Reaktionsverlauf der Sauerstoffreduktion pH-Wert abhängig ist. Diese deutet auf verschiedene aktive Spezies in Abhängigkeit des pH-Werts hin. Im dritten Schritt wurde der gezielte Einsatz von hydrierten Salzen (Magnesium- und Calciumchlorid) als Salzphase für die ionothermale Synthese untersucht. Es konnte gezeigt werden, dass Hydrate einen sekundären Templatierungseffekt erlauben, was anhand der Koexistenz von flüssigen und festen Salzphasen erklärt werden konnte. Hierdurch konnten faserartige NDC-Materialien mit SSAs von bis zu 2780 m2 g-1 und TPVs von bis zu 3,86 cm3 g-1 synthetisiert werden. Des Weiteren wurde anhand dieser NDC-Materialien erfolgreich gezeigt, dass es möglich ist sauerstoffreduktionsaktive Spezies durch einfache Metallierung mit Eisenionen bei niedrigen Temperaturen einzuführen. Zusammenfassend konnte die vorliegende Arbeit die kostengünstige und nachhaltige Synthese hochporöser Materialien mit einstellbarer Porosität zeigen, welche in energierelevanten Bereichen eingesetzt werden können. Hierdurch kann die notwendige Erweiterung des Sektors der erneuerbaren Energien unterstützt werden. KW - porous materials KW - nitrogen doped carbons KW - ORR KW - oxygen reduction reaction KW - electrocatalysis KW - poröse Materialien KW - stickstoffdotierte Kohlenstoffe KW - ORR KW - Sauerstoff Reduktion KW - Elektrokatalyse KW - ionothermal synthesis KW - ionothermale Synthese Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-101323 ER - TY - GEN A1 - Hildebrand, Viet A1 - Laschewsky, André A1 - Päch, Michael A1 - Müller-Buschbaum, Peter A1 - Papadakis, Christine M. T1 - Effect of the zwitterion structure on the thermo-responsive behaviour of poly(sulfobetaine methacrylates) N2 - A series of new sulfobetaine methacrylates, including nitrogen-containing saturated heterocycles, was synthesised by systematically varying the substituents of the zwitterionic group. Radical polymerisation via the RAFT (reversible addition–fragmentation chain transfer) method in trifluoroethanol proceeded smoothly and was well controlled, yielding polymers with predictable molar masses. Molar mass analysis and control of the end-group fidelity were facilitated by end-group labeling with a fluorescent dye. The polymers showed distinct thermo-responsive behaviour of the UCST (upper critical solution temperature) type in an aqueous solution, which could not be simply correlated to their molecular structure via an incremental analysis of the hydrophilic and hydrophobic elements incorporated within them. Increasing the spacer length separating the ammonium and the sulfonate groups of the zwitterion moiety from three to four carbons increased the phase transition temperatures markedly, whereas increasing the length of the spacer separating the ammonium group and the carboxylate ester group on the backbone from two to three carbons provoked the opposite effect. Moreover, the phase transition temperatures of the analogous polyzwitterions decreased in the order dimethylammonio > morpholinio > piperidinio alkanesulfonates. In addition to the basic effect of the polymers’ precise molecular structure, the concentration and the molar mass dependence of the phase transition temperatures were studied. Furthermore, we investigated the influence of added low molar mass salts on the aqueous-phase behaviour for sodium chloride and sodium bromide as well as sodium and ammonium sulfate. The strong effects evolved in a complex way with the salt concentration. The strength of these effects depended on the nature of the anion added, increasing in the order sulfate < chloride < bromide, thus following the empirical Hofmeister series. In contrast, no significant differences were observed when changing the cation, i.e. when adding sodium or ammonium sulfate. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 298 Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-102028 ER - TY - THES A1 - Draffehn, Sören T1 - Optical Spectroscopy-Based Characterization of Micellar and Liposomal Systems with Possible Applications in Drug Delivery Y1 - 2016 ER - TY - JOUR A1 - Schilde, Uwe A1 - Kelling, Alexandra A1 - Umbreen, Sumaira A1 - Linker, Torsten T1 - Crystal structures of three bicyclic carbohydrate derivatives JF - Acta crystallographica Section E ; Crystallographic communications N2 - The title compounds, [(1R,3R,4R,5R,6S)-4,5-bis(acetyloxy)-7-oxo-2-oxabicyclo- [4.2.0]octan-3-yl]methyl acetate, C14H18O8, (I), [(1S,4R,5S,6R)-5-acetyloxy-7- hydroxyimino-2-oxobicyclo[4.2.0]octan-4-yl acetate, C11H15NO6, (II), and [(3aR,5R,6R,7R,7aS)-6,7-bis(acetyloxy)-2-oxooctahydropyrano[3,2-b]pyrrol-5- yl]methyl acetate, C14H19NO8, (III), are stable bicyclic carbohydrate derivatives. They can easily be synthesized in a few steps from commercially available glycals. As a result of the ring strain from the four-membered rings in (I) and (II), the conformations of the carbohydrates deviate strongly from the ideal chair form. Compound (II) occurs in the boat form. In the five-membered lactam (III), on the other hand, the carbohydrate adopts an almost ideal chair conformation. As a result of the distortion of the sugar rings, the configurations of the three bicyclic carbohydrate derivatives could not be determined from their NMR coupling constants. From our three crystal structure determinations, we were able to establish for the first time the absolute configurations of all new stereocenters of the carbohydrate rings. KW - crystal structure KW - carbohydrate deriv­atives KW - conformation KW - configuration Y1 - 2016 U6 - https://doi.org/10.1107/S2056989016018727 SN - 2056-9890 VL - 72 IS - 12 SP - 1839 EP - 1844 PB - IUCR CY - Chester ER - TY - GEN A1 - Schilde, Uwe A1 - Kelling, Alexandra A1 - Umbreen, Sumaira A1 - Linker, Torsten T1 - Crystal structures of three bicyclic carbohydrate derivatives N2 - The title compounds, [(1R,3R,4R,5R,6S)-4,5-bis­(acet­yloxy)-7-oxo-2-oxabi­cyclo[4.2.0]octan-3-yl]methyl acetate, C14H18O8, (I), [(1S,4R,5S,6R)-5-acet­yloxy-7-hy­droxy­imino-2-oxobi­cyclo­[4.2.0]octan-4-yl acetate, C11H15NO6, (II), and [(3aR,5R,6R,7R,7aS)-6,7-bis­(acet­yloxy)-2-oxo­octa­hydro­pyrano[3,2-b]pyrrol-5-yl]methyl acetate, C14H19NO8, (III), are stable bicyclic carbohydrate derivatives. They can easily be synthesized in a few steps from commercially available glycals. As a result of the ring strain from the four-membered rings in (I) and (II), the conformations of the carbohydrates deviate strongly from the ideal chair form. Compound (II) occurs in the boat form. In the five-membered lactam (III), on the other hand, the carbohydrate adopts an almost ideal chair conformation. As a result of the distortion of the sugar rings, the configurations of the three bicyclic carbohydrate derivatives could not be determined from their NMR coupling constants. From our three crystal structure determinations, we were able to establish for the first time the absolute configurations of all new stereocenters of the carbohydrate rings. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 296 KW - crystal structure KW - carbohydrate deriv­atives KW - conformation KW - configuration Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-100833 ER - TY - THES A1 - Rackwitz, Jenny T1 - A novel approach to study low-energy electron-induced damage to DNA oligonucleotides BT - Influence of DNA sequence, topology and nucleobase modification Y1 - 2016 ER - TY - THES A1 - Limberg, Felix Rolf Paul T1 - Synthese und Entwicklung thermisch vernetzbarer OLED-Materialien Y1 - 2016 ER - TY - THES A1 - Won, Jooyoung T1 - Dynamic and equilibrium adsorption behaviour of ß-lactoglobulin at the solution/tetradecane interface: Effect of solution concentration, pH and ionic strength T1 - Dynamik und Gleichgewicht der Adsorption von ß-Lactoglobulin an der Grenzfläche Lösung / Tetradecan (W/TD) N2 - Proteins are amphiphilic and adsorb at liquid interfaces. Therefore, they can be efficient stabilizers of foams and emulsions. β-lactoglobulin (BLG) is one of the most widely studied proteins due to its major industrial applications, in particular in food technology. In the present work, the influence of different bulk concentration, solution pH and ionic strength on the dynamic and equilibrium pressures of BLG adsorbed layers at the solution/tetradecane (W/TD) interface has been investigated. Dynamic interfacial pressure (Π) and interfacial dilational elastic modulus (E’) of BLG solutions for various concentrations at three different pH values of 3, 5 and 7 at a fixed ionic strength of 10 mM and for a selected fixed concentration at three different ionic strengths of 1 mM, 10 mM and 100 mM are measured by Profile Analysis Tensiometer PAT-1 (SINTERFACE Technologies, Germany). A quantitative data analysis requires additional consideration of depletion due to BLG adsorption at the interface at low protein bulk concentrations. This fact makes experiments more efficient when oil drops are studied in the aqueous protein solutions rather than solution drops formed in oil. On the basis of obtained experimental data, concentration dependencies and the effect of solution pH on the protein surface activity was qualitatively analysed. In the presence of 10 mM buffer, we observed that generally the adsorbed amount is increasing with increasing BLG bulk concentration for all three pH values. The adsorption kinetics at pH 5 result in the highest Π values at any time of adsorption while it exhibits a less active behaviour at pH 3. Since the experimental data have not been in a good agreement with the classical diffusion controlled model due to the conformational changes which occur when the protein molecules get in contact with the hydrophobic oil phase in order to adapt to the interfacial environment, a new theoretical model is proposed here. The adsorption kinetics data were analysed with the newly proposed model, which is the classical diffusion model but modified by assuming an additional change in the surface activity of BLG molecules when adsorbing at the interface. This effect can be expressed through the adsorption activity constant in the corresponding equation of state. The dilational visco-elasticity of the BLG adsorbed interfacial layers is determined from measured dynamic interfacial tensions during sinusoidal drop area variations. The interfacial tension responses to these harmonic drop oscillations are interpreted with the same thermodynamic model which is used for the corresponding adsorption isotherm. At a selected BLG concentration of 2×10-6 mol/l, the influence of the ionic strength using different buffer concentration of 1, 10 and 100 mM on the interfacial pressure was studied. It is affected weakly at pH 5, whereas it has a strong impact by increasing buffer concentration at pH 3 and 7. In conclusion, the structure formation of BLG adsorbed layer in the early stage of adsorption at the W/TD interface is similar to those of the solution/air (W/A) surface. However, the equation of state at the W/TD interface provides an adsorption activity constant which is almost two orders of magnitude higher than that for the solution/air surface. At the end of this work, a new experimental tool called Drop and Bubble Micro Manipulator DBMM (SINTERFACE Technologies, Germany) has been introduced to study the stability of protein covered bubbles against coalescence. Among the available protocols the lifetime between the moment of contact and coalescence of two contacting bubble is determined for different BLG concentrations. The adsorbed amount of BLG is determined as a function of time and concentration and correlates with the observed coalescence behaviour of the contacting bubbles. N2 - Die vorliegende Arbeit ist ein Beitrag zum Verständnis des Überganges von der qualitativen zur quantitativen Beschreibung der Adsorption von Proteinen an der Wasser/Öl- Grenzfläche. Dabei wird die Adsorption des Molkeproteins ß-Lactoglobulin (BLG) an der Wasser/Tetradekan (W/TD) Grenzfläche untersucht. Die Proteinadsorption an Grenzflächen zwischen zwei nicht mischbaren Flüssigkeiten ist ein Zeitprozess. Die Tropfenprofil-Analysen-Tensiometrie (PAT) hat sich als optimale Methode erwiesen, um den Prozess der Bildung von Proteinadsorptionsschichten an Flüssig-/flüssig-Grenzflächen quantitativ zu untersuchen. Die gemessenen dynamischen Grenzflächenspannungen können genutzt werden, um die adsorbierte Menge von Protein an Grenzflächen zu bestimmen. Zusätzlich erlaubt die Methode, durch periodische Tropfenoszillationen, die Messung der Dilatations-Viskoelastizität. Die experimentellen Ergebnisse zeigen deutlich, dass die Adsorption von Proteinen mit der Konzentration ansteigt. Der Adsorptionsprozess von Proteinen ist ähnlich dem von Tensiden, allerdings wird seine Beschreibung wesentlich komplizierter, durch die zusätzliche Möglichkeit der Konformationsänderungen der Proteinmoleküle an der Grenzfläche. Ein kürzlich im Rahmen dieser Dissertation entwickeltes Modell zur Adsorptionskinetik von Proteinen wurde genutzt, um experimentelle Daten für BLG zu interpretieren. Dieses kinetische Modell erlaubt es, den Mechanismus der Proteinadsorption an der Wasser/Öl-Grenzfläche zu beschreiben, was durch ältere Modelle bisher nicht möglich war. Im neu entwickelten Modell wurde die klassische Diffusionstheorie so modifiziert, dass eine Änderung der Adsorptionsaktivität der adsorbierenden Proteinmoleküle berücksichtigt wird. Die Änderung der Adsorptionsaktivität geschieht durch den Kontakt adsorbierter BLG-Moleküle an der Wasser/Öl-Grenzfläche. Es wird nach diesem neuen Modell angenommen, dass die Adsorptionsaktivität eine Funktion der Adsorptionszeit ist. Die ansteigende Adsorptionaktivität ist erforderlich, um den Adsorptionsprozess von BLG über den gesamten Zeitbereich quantitativ zu beschrieben. Mit diesem neuen Modell wurde es möglich, die experimentellen Daten zur Adsorptionskinetik sowie zur Dilatationsrheologie von Adsorptionsschichten bei unterschiedlichen BLG-Konzentrationen, pH-Werten und Ionenstärken an der Grenzfläche Lösung/Tetradekan quantitativ zu beschreiben. Die Ergebnisse dienen als Ausgangspunkt für weitere Entwicklungen zur Verbesserung des Verständnisses der Stabilität von Schäumen und Emulsionen, die durch die Dynamik der Adsorption von Molekülen wie BLG signifikant beeinflusst wird. KW - beta-lactoglobulin KW - water/tetradecane interface KW - drop profile analysis tensiometry KW - dynamic interfacial tensions KW - protein adsorption KW - pH effect KW - ionic strength effect KW - protein stabilized foams KW - drop and bubble coalescence KW - interfacial dynamics KW - capillary pressure tensiometry KW - drop-drop interaction KW - bubble-bubble interaction KW - ß-Lactoglobulin KW - Flüssig-/flüssig-Grenzflächen KW - Wasser/Öl-Grenzfläche KW - Grenzfläche Lösung/Tetradecan KW - Dynamik der Adsorption KW - Gleichgewicht der Adsorption KW - Proteinadsorption KW - Tropfenprofil-Analysen-Tensiometrie KW - Tropfenoszillationen KW - Dilatations-Viskoelastizität KW - klassische Diffusionstheorie KW - Konformationsänderungen KW - Adsorptionsaktivität KW - Wirkung des pH-Werten KW - Wirkung des Ionenstärken KW - Stabilität von Schäumen KW - Stabilität von Emulsionen Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-99167 ER - TY - THES A1 - Klier, Dennis Tobias T1 - Upconversion luminescence in Er-codoped NaYF4 nanoparticles T1 - Frequenzaufkonversion in Er-codotierten NaYF4 Nanopartikeln BT - fundamental photophysics and optimization for life science applications BT - fundamentale Photophysik und Optimierung für Anwendungen in den Lebenswissenschaften N2 - In the context of an increasing population of aging people and a shift of medical paradigm towards an individualized medicine in health care, nanostructured lanthanides doped sodium yttrium fluoride (NaYF4) represents an exciting class of upconversion nanomaterials (UCNM) which are suitable to bring forward developments in biomedicine and -biodetection. Despite the fact that among various fluoride based upconversion (UC) phosphors lanthanide doped NaYF4 is one of the most studied upconversion nanomaterial, many open questions are still remaining concerning the interplay of the population routes of sensitizer and activator electronic states involved in different luminescence upconversion photophysics as well as the role of phonon coupling. The collective work aims to explore a detailed understanding of the upconversion mechanism in nanoscaled NaYF4 based materials co-doped with several lanthanides, e.g. Yb3+ and Er3+ as the "standard" type upconversion nanoparticles (UCNP) up to advanced UCNP with Gd3+ and Nd3+. Especially the impact of the crystal lattice structure as well as the resulting lattice phonons on the upconversion luminescence was investigated in detail based on different mixtures of cubic and hexagonal NaYF4 nanoscaled crystals. Three synthesis methods, depending on the attempt of the respective central spectroscopic questions, could be accomplished in the following work. NaYF4 based upconversion nanoparticles doped with several combination of lanthanides (Yb3+, Er3+, Gd3+ and Nd3+) were synthesized successfully using a hydrothermal synthesis method under mild conditions as well as a co-precipitation and a high temperature co-precipitation technique. Structural information were gathered by means of X-ray diffraction (XRD), electron microscopy (TEM), dynamic light scattering (DLS), Raman spectroscopy and inductively coupled plasma atomic emission spectrometry (ICP-OES). The results were discussed in detail with relation to the spectroscopic results. A variable spectroscopic setup was developed for multi parameter upconversion luminescence studies at various temperature 4 K to 328 K. Especially, the study of the thermal behavior of upconversion luminescence as well as time resolved area normalized emission spectra were a prerequisite for the detailed understanding of intramolecular deactivation processes, structural changes upon annealing or Gd3+ concentration, and the role of phonon coupling for the upconversion efficiency. Subsequently it became possible to synthesize UCNP with tailored upconversion luminescence properties. In the end, the potential of UCNP for life science application should be enunciated in context of current needs and improvements of a nanomaterial based optical sensors, whereas the "standard" UCNP design was attuned according to the special conditions in the biological matrix. In terms of a better biocompatibility due to a lower impact on biological tissue and higher penetrability for the excitation light. The first step into this direction was to use Nd3+ ions as a new sensitizer in tridoped NaYF4 based UCNP, whereas the achieved absolute and relative temperature sensitivity is comparable to other types of local temperature sensors in the literature. N2 - Ziel der Arbeit war es ein erweitertes Verständnis des Mechanismus der Lichtaufkonversion, sowie dessen gezielte Manipulation in verschiedenen Nanomaterialien auf Natriumyttrium-fluoridbasis zu erlangen. Die optischen Eigenschaften werden dabei durch eine gezielte Zusammenstellung verschiedener Lanthanoidionen hervorgerufen, welche während der Synthese in die Materialien eingebracht werden. Der Fokus lag hierbei in der Aufklärung des Zusammenspiels zwischen der Struktur der Materialien und deren Lichtaufkonver-sionsvermögen sowie dem Erlangen eines generellen Verständnisses der einzelnen Teilschritte des Lichtaufkonversionsmechanismus. Dabei wird das Licht, welches nach Anregung der Lanthanoidionen durch einen Laser von diesen emittiert wird, hinsichtlich der Farbzusammensetzung und des Abklingverhaltens der Lumineszenz untersucht. Diese Erkenntnisse geben sowohl einen Einblick in die verschiedenen Teilschritte des Lichtaufkonversionsmechanismus, als auch deren Korrelation zur Struktur der Nanomaterialien. Während der Arbeit wurde ein variabler Messplatz mit einer wellenlängendurchstimmbaren Anregungslichtquelle, einer Detektionseinheit mit hervorragender spektraler und zeitlicher Auflösung für die Messung des emittierten Lichtes sowie einer Temperiereinheit, mit der die Proben in einem Temperaturbereich von 4 Kelvin (-269,15 °C) bis 328 Kelvin (50 °C) temperiert werden können, aufgebaut. Die Proben wurden mithilfe der modernen Kopräzipitations- und Hydrothermalsynthese in verschiedenen Zusammensetzungen und Oberflächenmodifizierungen hergestellt, um sowohl Partikel für fundamentale Untersuchungen der Lichtaufkonversion verfügbar zu haben, als auch den hohen Anforderungen für Anwendungen in den Lebenswissenschaften gerecht zu werden. Die Reaktion fand bei hohen Temperaturen (160 °C bis 320 °C) unter Schutzgasatmosphäre statt und gewährleistete so die Bildung von hochkristallinen Partikeln, deren Größe stark mit der Synthesetemperatur korreliert. Mithilfe von zeitaufgelösten Lumineszenzuntersuchungen gelang ein sehr detaillierter Einblick in strukturelle Veränderungen der Nanopartikeln, welche durch klassische strukturanalytische Methoden, wie der Röntgenpulverdiffraktometrie, nicht in dem Maße möglich sind. Zudem konnte ein erheblicher Teil dazu beigetragen werden, das komplexe Zusammenspiel von Energietransportmechanismen, Gitterschwingungen und thermisch induzierten Prozessen zu verstehen. Zuletzt wurden, basierend auf der Vielzahl an gewonnenen Erkenntnissen, speziell designte Nanopartikel hergestellt. Die Farbe des Emissionslichts dieser Partikel wies dabei eine hohe Abhängigkeit von der Umgebungstemperatur auf. Auftretende Herausforderungen induziert durch das verwendete Anregungslicht im Nahinfrarotenbereich, wie das Aufheizen oder die zu hohe Absorption der Probe, wurden durch die Erweiterung des Aufkonversionssystems gelöst. Damit konnten beste Voraussetzungen für potentielle Anwendungen, wie zum Beispiel als Nanothermometer geschaffen werden. KW - Nanopartikel KW - nanoparticle KW - Frequenzaufkonversion KW - upconversion KW - Lanthanoide KW - lanthanides Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-98486 ER - TY - THES A1 - Couturier, Jean-Philippe T1 - New inverse opal hydrogels as platform for detecting macromolecules T1 - Neue inverse Opal-Hydrogele als Plattform für die Detektion von Makromolekülen N2 - In this thesis, a route to temperature-, pH-, solvent-, 1,2-diol-, and protein-responsive sensors made of biocompatible and low-fouling materials is established. These sensor devices are based on the sensitivemodulation of the visual band gap of a photonic crystal (PhC), which is induced by the selective binding of analytes, triggering a volume phase transition. The PhCs introduced by this work show a high sensitivity not only for small biomolecules, but also for large analytes, such as glycopolymers or proteins. This enables the PhC to act as a sensor that detects analytes without the need of complex equipment. Due to their periodical dielectric structure, PhCs prevent the propagation of specific wavelengths. A change of the periodicity parameters is thus indicated by a change in the reflected wavelengths. In the case explored, the PhC sensors are implemented as periodically structured responsive hydrogels in formof an inverse opal. The stimuli-sensitive inverse opal hydrogels (IOHs) were prepared using a sacrificial opal template of monodispersed silica particles. First, monodisperse silica particles were assembled with a hexagonally packed structure via vertical deposition onto glass slides. The obtained silica crystals, also named colloidal crystals (CCs), exhibit structural color. Subsequently, the CCs templates were embedded in polymer matrix with low-fouling properties. The polymer matrices were composed of oligo(ethylene glycol) methacrylate derivatives (OEGMAs) that render the hydrogels thermoresponsive. Finally, the silica particles were etched, to produce highly porous hydrogel replicas of the CC. Importantly, the inner structure and thus the ability for light diffraction of the IOHs formed was maintained. The IOH membrane was shown to have interconnected pores with a diameter as well as interconnections between the pores of several hundred nanometers. This enables not only the detection of small analytes, but also, the detection of even large analytes that can diffuse into the nanostructured IOH membrane. Various recognition unit – analyte model systems, such as benzoboroxole – 1,2-diols, biotin – avidin and mannose – concanavalin A, were studied by incorporating functional comonomers of benzoboroxole, biotin and mannose into the copolymers. The incorporated recognition units specifically bind to certain low and highmolar mass biomolecules, namely to certain saccharides, catechols, glycopolymers or proteins. Their specific binding strongly changes the overall hydrophilicity, thus modulating the swelling of the IOH matrices, and in consequence, drastically changes their internal periodicity. This swelling is amplified by the thermoresponsive properties of the polymer matrix. The shift of the interference band gap due to the specific molecular recognition is easily visible by the naked eye (up to 150 nm shifts). Moreover, preliminary trial were attempted to detect even larger entities. Therefore anti-bodies were immobilized on hydrogel platforms via polymer-analogous esterification. These platforms incorporate comonomers made of tri(ethylene glycol) methacrylate end-functionalized with a carboxylic acid. In these model systems, the bacteria analytes are too big to penetrate into the IOH membranes, but can only interact with their surfaces. The selected model bacteria, as Escherichia coli, show a specific affinity to anti-body-functionalized hydrogels. Surprisingly in the case functionalized IOHs, this study produced weak color shifts, possibly opening a path to detect directly living organism, which will need further investigations. N2 - Periodisch strukturierte, funktionelle responsive Hydrogele wurden in Form von inversen Opalen (IOH) aufgebaut und als Basiselement für Temperatur-, pH-, lösungsmittel-, 1,2-diol- oder protein-sensitive Sensorsysteme entwickelt. Dazu wurden aus biokompatiblen Bausteinen funktionelle photonische Kristalle aufgebaut, deren optische Bandlücke durch selektive Bindung eines Analyten moduliert wird, indem dieser einen Volumen-Phasenübergang induziert.Mittels solcher responsiver photonische Kristalle ist es möglich, Analyte ohne aufwendige Geräte durch Farbänderung einfach zu detektieren. Die entwickelten Systeme zeigen nicht nur eine hohe Empfindlichkeit gegenüber kleinen Biomolekülen, sondern auch gegenüber größeren Analyten wie z.B. Glycopolymeren und Proteinen, was bisher nicht bekannt war. Die stimuli-sensitiven inversen Opal Hydrogele (IOHs) wurden in mehreren Stufen hergestellt. Als erstes wurden dafür kolloidale Kristalle mit hexagonal gepackten Strukturen aus monodispersen SiO2-Partikeln auf Glasträgern auf ebaut (“Opal”). Die Opale mit charakteristischen Strukturfarben wurden anschließend in eine polymere Hydrogelmatrix eingebettet. Diese wurde aus Oligo(ethylenglycol)methacrylaten (OEGMAs) hergestellt, so dass die Hydrogele sowohl thermosensitives als auch “lowfouling” Verhalten zeigen. Im letzten Schritt wurden die SiO2-Partikel entfernt und so eine hochporöse Hydrogel-Replika der Opale erhalten unter Erhalt deren innerer Struktur und Strukturfarbe. Die miteinander verbunden Poren der IOHMembran besitzen einen Durchmesser von einigen hundert Nanometern. Dies ermöglichte nicht nur die Detektion von kleinen Analyten, sondern auch die Detektion von deutlich größeren, makromolekularen Analyten, die ebenfalls in die Nanostrukturen der IOH Membran diffundieren können. Modellsysteme bestanden immer aus einer Erkennungsgruppe und einem Analyten, beispielsweise aus Benzoboroxol – 1,2-Diol, Biotin – Avidin und Mannose – Lectin (Concanavalin A). Für dieseModellsysteme wurden OEGMAs mitMonomeren copolymerisiert, die mit Benzoboroxol, Biotin bzw.Mannose funktionalisiert waren. Die so im Polymer eingebauten Erkennungsgruppen binden spezifisch an bestimmte Biomoleküle unterschiedlicherMolmassen, wie z.B. niedermolekulare Saccharide oder Catechin, als auch hochmolekulare Glycopolymere oder Proteine. Der spezifische Bindungsvorgang moduliert die Gesamthydrophilie, so dass sich der Quellgrad der IOH-Matrix ändert. Dies wiederrumverändert die innere Periodizität und damit die Strukturfarbe. Dabei wird der Quelleffekt durch die Thermosensitivität der Hydrogele massiv verstärkt. Eine spezifischeMolekülanbindung lässt sich so optisch, z.T. sogar mit dem Auge, erkennen aufgrund der deutlichen Verschiebung der Strukturfarbe um bis zu 150 nm. Des Weiteren wurden auch erste Versuche zur Detektion von noch größeren Analyten unternommen. Dafür wurden Antiköper durch nachträgliche Modifizierung der Polymerseitenketten auf den Hydrogeloberflächen immobilisiert. Mit diesem Modellsystem konnten unterschiedliche Bakterienarten durch Antikörper spezifisch gebunden werden. Die verwendeten Bakterienarten sind zwar zu groß, um in die Membran des IOH Systems einzudringen, können jedoch mit der IOH-Oberfläche wechselwirken. Insbesondere dasModellsystem mit Escherichia coli zeigte eine starke, spezifische Affinität zu dem Antikörper-funktionalisierten IOH. Überraschenderweise zeigte sich bei den Versuchen in Gegenwart des Analyten eine kleine Farbänderung der funktionalisierten IOH. Damit eröffnet sich u.U. dieMöglichkeit, mit solchen responsiven photonischen Kristallen auch lebende Organismen spezifisch und einfach zu detektieren, was in weiterführenden Arbeiten zu klären sein wird. KW - inverse opal KW - hydrogel KW - responsive polymer KW - inverse Opale KW - Hydrogel KW - schaltbare Polymere Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-98412 ER - TY - GEN A1 - Schulze, Nicole A1 - Koetz, Joachim T1 - Kinetically Controlled Growth of Gold Nanotriangles in a Vesicular Template Phase by Adding a Strongly Alternating Polyampholyte N2 - This paper is focused on the temperature dependent synthesis of gold nanotriangles in a vesicular template phase, containing phosphatidylcholin and AOT, by adding the strongly alternating polyampholyte PalPhBisCarb. UV-vis absorption spectra in combination with TEM micrographs show that flat gold nanoplatelets are formed predominantly in presence of the polyampholyte at 45 °C. The formation of triangular and hexagonal nanoplatelets can be directly influenced by the kinetic approach, i.e., by varying the polyampholyte dosage rate at 45 °C. Corresponding zeta potential measurements indicate that a temperature dependent adsorption of the polyampholyte on the {111} faces will induce the symmetry breaking effect, which is responsible for the kinetically controlled hindered vertical and preferred lateral growth of the nanoplatelets. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 271 KW - Polyampholytes KW - Nanotriangles KW - Kinetically controlled nanocrystal growth Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-98380 ER - TY - THES A1 - Zabel, Andre T1 - Halidometallate - Struktur und Eigenschaften Y1 - 2016 ER - TY - THES A1 - Oliveira, Joana Santos Lapa T1 - Role of different ceramides on the nanostructure of Stratum Corneum models and the influence of selected penetration enhancers Y1 - 2016 ER -