TY - JOUR A1 - Reifarth, Martin A1 - Bekir, Marek A1 - Bapolisi, Alain M. A1 - Titov, Evgenii A1 - Nusshardt, Fabian A1 - Nowaczyk, Julius A1 - Grigoriev, Dmitry A1 - Sharma, Anjali A1 - Saalfrank, Peter A1 - Santer, Svetlana A1 - Hartlieb, Matthias A1 - Böker, Alexander T1 - A dual pH- and light-responsive spiropyrane-based surfactant BT - investigations on Its switching behavior and remote control over emulsion stability JF - Angewandte Chemie : a journal of the Gesellschaft Deutscher Chemiker ; International edition N2 - A cationic surfactant containing a spiropyrane unit is prepared exhibiting a dual-responsive adjustability of its surface-active characteristics. The switching mechanism of the system relies on the reversible conversion of the non-ionic spiropyrane (SP) to a zwitterionic merocyanine (MC) and can be controlled by adjusting the pH value and via light, resulting in a pH-dependent photoactivity: While the compound possesses a pronounced difference in surface activity between both forms under acidic conditions, this behavior is suppressed at a neutral pH level. The underlying switching processes are investigated in detail, and a thermodynamic explanation based on a combination of theoretical and experimental results is provided. This complex stimuli-responsive behavior enables remote-control of colloidal systems. To demonstrate its applicability, the surfactant is utilized for the pH-dependent manipulation of oil-in-water emulsions. KW - Dual-Responsiveness KW - Manipulation of Emulsion Stability KW - Spiropyrane KW - Surfactant KW - Switchable Surfactants KW - pH-Dependent Photoresponsivity Y1 - 2022 U6 - https://doi.org/10.1002/anie.202114687 SN - 1433-7851 SN - 1521-3773 VL - 61 IS - 21 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Laroque, Sophie A1 - Reifarth, Martin A1 - Sperling, Marcel A1 - Kersting, Sebastian A1 - Kloepzig, Stefanie A1 - Budach, Patrick A1 - Hartlieb, Matthias A1 - Storsberg, Joachim T1 - Impact of multivalence and self-assembly in the design of polymeric antimicrobial peptide mimics JF - ACS applied materials & interfaces N2 - Antimicrobial resistance is an increasingly serious challenge for public health and could result in dramatic negative consequences for the health care sector during the next decades. To solve this problem, antibacterial materials that are unsusceptible toward the development of bacterial resistance are a promising branch of research. In this work, a new type of polymeric antimicrobial peptide mimic featuring a bottlebrush architecture is developed, using a combination of reversible addition-fragmentation chain transfer (RAFT) polymerization and ring-opening metathesis polymerization (ROMP). This approach enables multivalent presentation of antimicrobial subunits resulting in improved bioactivity and an increased hemocompatibility, boosting the selectivity of these materials for bacterial cells. Direct probing of membrane integrity of treated bacteria revealed highly potent membrane disruption caused by bottlebrush copolymers. Multivalent bottlebrush copolymers clearly outperformed their linear equivalents regarding bioactivity and selectivity. The effect of segmentation of cationic and hydrophobic subunits within bottle brushes was probed using heterograft copolymers. These materials were found to self-assemble under physiological conditions, which reduced their antibacterial activity, highlighting the importance of precise structural control for such applications. To the best of our knowledge, this is the first example to demonstrate the positive impact of multivalence, generated by a bottlebrush topology in polymeric antimicrobial peptide mimics, making these polymers a highly promising material platform for the design of new bactericidal systems. KW - RAFT polymerization KW - ROMP KW - antimicrobial polymers KW - antimicrobial peptide KW - mimics KW - bottlebrush copolymers Y1 - 2020 U6 - https://doi.org/10.1021/acsami.0c05944 SN - 1944-8244 SN - 1944-8252 VL - 12 IS - 27 SP - 30052 EP - 30065 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Wang, Xuepu A1 - Sperling, Marcel A1 - Reifarth, Martin A1 - Böker, Alexander T1 - Shaping metallic nanolattices BT - Design by microcontact printing from wrinkled stamps JF - Small N2 - A method for the fabrication of well-defined metallic nanostructures is presented here in a simple and straightforward fashion. As an alternative to lithographic techniques, this routine employs microcontact printing utilizing wrinkled stamps, which are prepared from polydimethylsiloxane (PDMS), and includes the formation of hydrophobic stripe patterns on a substrate via the transfer of oligomeric PDMS. Subsequent backfilling of the interspaces between these stripes with a hydroxyl-functional poly(2-vinyl pyridine) then provides the basic pattern for the deposition of citrate-stabilized gold nanoparticles promoted by electrostatic interaction. The resulting metallic nanostripes can be further customized by peeling off particles in a second microcontact printing step, which employs poly(ethylene imine) surface-decorated wrinkled stamps, to form nanolattices. Due to the independent adjustability of the period dimensions of the wrinkled stamps and stamp orientation with respect to the substrate, particle arrays on the (sub)micro-scale with various kinds of geometries are accessible in a straightforward fashion. This work provides an alternative, cost-effective, and scalable surface-patterning technique to fabricate nanolattice structures applicable to multiple types of functional nanoparticles. Being a top-down method, this process could be readily implemented into, e.g., the fabrication of optical and sensing devices on a large scale. KW - gold nanoparticle assembly KW - hydroxyl-functional poly(2-vinyl pyridine) KW - metallic nanolattices KW - microcontact printing KW - oligomeric KW - polydimethylsiloxane KW - polydimethylsiloxane wrinkles KW - wrinkled stamps Y1 - 2020 U6 - https://doi.org/10.1002/smll.201906721 SN - 1613-6810 SN - 1613-6829 VL - 16 IS - 11 SP - 1 EP - 8 PB - Wiley-VCH CY - Weinheim ER - TY - GEN A1 - Wang, Xuepu A1 - Sperling, Marcel A1 - Reifarth, Martin A1 - Böker, Alexander T1 - Shaping metallic nanolattices BT - Design by microcontact printing from wrinkled stamps T2 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - A method for the fabrication of well-defined metallic nanostructures is presented here in a simple and straightforward fashion. As an alternative to lithographic techniques, this routine employs microcontact printing utilizing wrinkled stamps, which are prepared from polydimethylsiloxane (PDMS), and includes the formation of hydrophobic stripe patterns on a substrate via the transfer of oligomeric PDMS. Subsequent backfilling of the interspaces between these stripes with a hydroxyl-functional poly(2-vinyl pyridine) then provides the basic pattern for the deposition of citrate-stabilized gold nanoparticles promoted by electrostatic interaction. The resulting metallic nanostripes can be further customized by peeling off particles in a second microcontact printing step, which employs poly(ethylene imine) surface-decorated wrinkled stamps, to form nanolattices. Due to the independent adjustability of the period dimensions of the wrinkled stamps and stamp orientation with respect to the substrate, particle arrays on the (sub)micro-scale with various kinds of geometries are accessible in a straightforward fashion. This work provides an alternative, cost-effective, and scalable surface-patterning technique to fabricate nanolattice structures applicable to multiple types of functional nanoparticles. Being a top-down method, this process could be readily implemented into, e.g., the fabrication of optical and sensing devices on a large scale. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1391 KW - gold nanoparticle assembly KW - hydroxyl-functional poly(2-vinyl pyridine) KW - metallic nanolattices KW - microcontact printing KW - oligomeric polydimethylsiloxane KW - polydimethylsiloxane wrinkles KW - wrinkled stamps Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-514341 SN - 1866-8372 IS - 11 ER - TY - JOUR A1 - Akarsu, Pinar A1 - Grobe, Richard A1 - Nowaczyk, Julius A1 - Hartlieb, Matthias A1 - Reinicke, Stefan A1 - Böker, Alexander A1 - Sperling, Marcel A1 - Reifarth, Martin T1 - Solid-phase microcontact printing for precise patterning of rough surfaces BT - using polymer-tethered elastomeric stamps for the transfer of reactive silanes JF - ACS applied polymer materials N2 - We present a microcontact printing (mu CP) routine suitable to introduce defined (sub-) microscale patterns on surface substrates exhibiting a high capillary activity and receptive to a silane-based chemistry. This is achieved by transferring functional trivalent alkoxysilanes, such as (3-aminopropyl)-triethoxysilane (APTES) as a low-molecular weight ink via reversible covalent attachment to polymer brushes grafted from elastomeric polydimethylsiloxane (PDMS) stamps. The brushes consist of poly{N-[tris(hydroxymethyl)-methyl]acrylamide} (PTrisAAm) synthesized by reversible addition-fragmentation chain-transfer (RAFT)-polymerization and used for immobilization of the alkoxysilane-based ink by substituting the alkoxy moieties with polymer-bound hydroxyl groups. Upon physical contact of the silane-carrying polymers with surfaces, the conjugated silane transfers to the substrate, thus completely suppressing ink-flow and, in turn, maximizing printing accuracy even for otherwise not addressable substrate topographies. We provide a concisely conducted investigation on polymer brush formation using atomic force microscopy (AFM) and ellipsometry as well as ink immobilization utilizing two-dimensional proton nuclear Overhauser enhancement spectroscopy (H-1-H-1-NOESY-NMR). We analyze the mu CP process by printing onto Si-wafers and show how even distinctively rough surfaces can be addressed, which otherwise represent particularly challenging substrates. KW - microcontact printing KW - capillary-active substrates KW - silane chemistry KW - PDMS surface grafting KW - surface patterning KW - shuttled RAFT-polymerization Y1 - 2021 U6 - https://doi.org/10.1021/acsapm.1c00024 SN - 2637-6105 VL - 3 IS - 5 SP - 2420 EP - 2431 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Sperling, Marcel A1 - Reifarth, Martin A1 - Grobe, Richard A1 - Böker, Alexander T1 - Tailoring patches on particles: a modified microcontact printing routine using polymer-functionalised stamps JF - Chemical communications N2 - Herein, we report a modified microcontact printing (mu CP) routine suitable to introduce particle patches of a low molecular weight ink (LMWI) on porous SiO2 microparticles. Thereby, patch precision could be significantly improved by utilising stamps which have been surface-functionalised with grafted polymers. This improvement was evaluated by a profound software-assisted statistical analysis. Y1 - 2019 U6 - https://doi.org/10.1039/c9cc03903a SN - 1359-7345 SN - 1364-548X VL - 55 IS - 68 SP - 10104 EP - 10107 PB - Royal Society of Chemistry CY - Cambridge ER -