TY - JOUR A1 - Schürings, Marco-Philipp A1 - Nevskyi, Oleksii A1 - Eliasch, Kamill A1 - Michel, Ann-Katrin A1 - Liu, Bing A1 - Pich, Andrij A1 - Böker, Alexander A1 - von Plessen, Gero A1 - Wöll, Dominik T1 - Diffusive Motion of Linear Microgel Assemblies in Solution JF - Polymers N2 - Due to the ability of microgels to rapidly contract and expand in response to external stimuli, assemblies of interconnected microgels are promising for actuation applications, e.g., as contracting fibers for artificial muscles. Among the properties determining the suitability of microgel assemblies for actuation are mechanical parameters such as bending stiffness and mobility. Here, we study the properties of linear, one-dimensional chains of poly(N-vinylcaprolactam) microgels dispersed in water. They were fabricated by utilizing wrinkled surfaces as templates and UV-cross-linking the microgels. We image the shapes of the chains on surfaces and in solution using atomic force microscopy (AFM) and fluorescence microscopy, respectively. In solution, the chains are observed to execute translational and rotational diffusive motions. Evaluation of the motions yields translational and rotational diffusion coefficients and, from the translational diffusion coefficient, the chain mobility. The microgel chains show no perceptible bending, which yields a lower limit on their bending stiffness. KW - microgels KW - linear assemblies KW - in situ fluorescence microscopy KW - shape analysis KW - rotational diffusion KW - translational diffusion KW - bending stiffness KW - actuation Y1 - 2016 U6 - https://doi.org/10.3390/polym8120413 SN - 2073-4360 VL - 8 PB - MDPI CY - Basel ER - TY - GEN A1 - Raju, Rajarshi Roy A1 - Liebig, Ferenc A1 - Hess, Andreas A1 - Schlaad, Helmut A1 - Koetz, Joachim T1 - Temperature-triggered reversible breakdown of polymer-stabilized olive BT - silicone oil Janus emulsions T2 - Postprints der Universität Potsdam Mathematisch-Naturwissenschaftliche Reihe N2 - A one-step moderate energy vibrational emulsification method was successfully employed to produce thermo-responsive olive/silicone-based Janus emulsions stabilized by poly(N,N-diethylacrylamide) carrying 0.7 mol% oleoyl side chains. Completely engulfed emulsion droplets remained stable at room temperature and could be destabilized on demand upon heating to the transition temperature of the polymeric stabilizer. Time-dependent light micrographs demonstrate the temperature-induced breakdown of the Janus droplets, which opens new aspects of application, for instance in biocatalysis. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 751 KW - microgels KW - step Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-436461 SN - 1866-8372 IS - 751 SP - 19271 EP - 19277 ER - TY - JOUR A1 - Raju, Rajarshi Roy A1 - Liebig, Ferenc A1 - Hess, Andreas A1 - Schlaad, Helmut A1 - Koetz, Joachim T1 - Temperature-triggered reversible breakdown of polymer-stabilized olive BT - silicone oil Janus emulsions JF - RSC Advances N2 - A one-step moderate energy vibrational emulsification method was successfully employed to produce thermo-responsive olive/silicone-based Janus emulsions stabilized by poly(N,N-diethylacrylamide) carrying 0.7 mol% oleoyl side chains. Completely engulfed emulsion droplets remained stable at room temperature and could be destabilized on demand upon heating to the transition temperature of the polymeric stabilizer. Time-dependent light micrographs demonstrate the temperature-induced breakdown of the Janus droplets, which opens new aspects of application, for instance in biocatalysis. KW - microgels KW - step Y1 - 2019 U6 - https://doi.org/10.1039/c9ra03463c SN - 2046-2069 VL - 9 IS - 35 SP - 19271 EP - 19277 PB - RSC Publishing CY - London ER - TY - JOUR A1 - Vukicevic, Radovan A1 - Neffe, Axel T. A1 - Luetzow, Karola A1 - Pierce, Benjamin F. A1 - Lendlein, Andreas T1 - Conditional Ultrasound Sensitivity of Poly[(N-isopropylacrylamide)-co-(vinyl imidazole)] Microgels for Controlled Lipase Release JF - Macromolecular rapid communications N2 - Triggering the release of cargo from a polymer network by ultrasonication as an external, non-invasive stimulus can be an interesting concept for on-demand release. Here, it is shown that, in pH-and thermosensitive microgels, the ultrasound sensitivity of the polymer network depends on the external conditions. Crosslinked poly[(N-isopropylacrylamide)-co-(vinyl imidazole)] microgels showed a volume phase transition temperature (VPTT) of 25-50 degrees C, which increases with decreasing pH. Above the VPTT the polymer chains are collapsed, while below VPTT they are extended. Only in the case of maximum observed swelling, where the polymer chains are expanded, the microgels are mechanically fragmented through ultrasonication. In contrast, when the polymer chains are partially collapsed it is not possible to manipulate the microgels by ultrasound. Additionally, the ultrasound-induced on-demand release of wheat germ lipase from the microgels could be demonstrated successfully. The principle of conditional ultrasound sensitivity is likely to be general and can be used for selection of matrix-cargo combinations. KW - ultrasound KW - polymers KW - microgels KW - lipase release KW - controlled release KW - thermoresponsive polymers KW - biomaterials Y1 - 2015 U6 - https://doi.org/10.1002/marc.201500311 SN - 1022-1336 SN - 1521-3927 VL - 36 IS - 21 SP - 1891 EP - 1896 PB - Wiley-VCH CY - Weinheim ER - TY - THES A1 - Leiendecker, Mai-Thi T1 - Physikalische Hydrogele auf Polyurethan-Basis T1 - Physical hydrogels based on polyurethanes N2 - Physical hydrogels have gained recent attention as cell substrates, since viscoelasticity or stress relaxation is a powerful parameter in mechanotransduction, which has long been neglected. We designed multi-functional polyurethanes to form physical hydrogels via a unique tunable gelation mechanism. The anionic polyurethanes spontaneously form aggregates in water that are kept in a soluble state through electrostatic repulsion. Fast subsequent gelation can be triggered by charge shielding which allows the aggregation and network building to proceed. This can be induced by adding either acids or salts, resulting in acidic (pH 4-5) or pH-neutral hydrogels, respectively. Whereas conventional polyurethane-based hydrogels are commonly prepared from toxic isocyanate precursors, the physical hydrogelation mechanism described here does not involve chemically reactive species which is ideal for in situ applications in sensitive environments. Both stiffness and stress relaxation can be tuned independently over a broad range and the gels exhibit excellent stress recovery behavior. N2 - Physikalische Hydrogele gewinnen derzeit als Zellsubstrate zunehmend an Interesse, da Viskoelastizität oder Stressrelaxation ein bedeutender Parameter in der Mechanotransduktion ist, der bisher vernachlässigt wurde. In dieser Arbeit wurden multi-funktionelle Polyurethane entworfen, die über einen neuartigen Gelierungsmechanismus physikalische Hydrogele bilden. In Wasser bilden die anionischen Polyurethane spontan Aggregate, welche durch elektrostatische Abstoßung in Lösung gehalten werden. Eine schnelle Gelierung kann von hier aus durch Ladungsabschirmung erreicht werden, wodurch die Aggregation voranschreitet und ein Netzwerk ausgebildet wird. Dies kann durch die Zugabe von verschiedenen Säuren oder Salzen geschehen, sodass sowohl saure (pH 4 - 5) als auch pH-neutrale Hydrogele erhalten werden können. Während konventionelle Hydrogele auf Polyurethan-Basis in der Regel durch toxische isocyanat-haltige Präpolymere hergestellt werden, eignet sich der hier beschriebene physikalische Gelierungsmechanismus für in situ Anwendungen in sensitiven Umgebungen. Sowohl Härte als auch Stressrelaxation der Hydrogele können unabhängig voneinander über einen breiten Bereich eingestellt werden. Darüberhinaus zeichnen sich die Hydrogele durch exzellente Stressregeneration aus. KW - Polyurethane KW - Hydrogele KW - physikalische Hydrogele KW - Kolloidchemie KW - Viskoelastizität KW - Stressrelaxation KW - Stressrelaxierung KW - Bulkgele KW - Mikrogele KW - Mechanotransduktion KW - polyurethanes KW - hydrogels KW - physical hydrogels KW - colloidal chemistry KW - viscoelasticity KW - stress-relaxation KW - stress relaxation KW - bulk gels KW - microgels KW - mechanotransduction Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-103917 ER -