TY - GEN A1 - Taubert, Andreas A1 - Balischewski, Christian A1 - Hentrich, Doreen A1 - Elschner, Thomas A1 - Eidner, Sascha A1 - Günter, Christina A1 - Behrens, Karsten A1 - Heinze, Thomas T1 - Water-soluble cellulose derivatives are sustainable additives for biomimetic calcium phosphate mineralization N2 - The effect of cellulose-based polyelectrolytes on biomimetic calcium phosphate mineralization is described. Three cellulose derivatives, a polyanion, a polycation, and a polyzwitterion were used as additives. Scanning electron microscopy, X-ray diffraction, IR and Raman spectroscopy show that, depending on the composition of the starting solution, hydroxyapatite or brushite precipitates form. Infrared and Raman spectroscopy also show that significant amounts of nitrate ions are incorporated in the precipitates. Energy dispersive X-ray spectroscopy shows that the Ca/P ratio varies throughout the samples and resembles that of other bioinspired calcium phosphate hybrid materials. Elemental analysis shows that the carbon (i.e., polymer) contents reach 10% in some samples, clearly illustrating the formation of a true hybrid material. Overall, the data indicate that a higher polymer concentration in the reaction mixture favors the formation of polymer-enriched materials, while lower polymer concentrations or high precursor concentrations favor the formation of products that are closely related to the control samples precipitated in the absence of polymer. The results thus highlight the potential of (water-soluble) cellulose derivatives for the synthesis and design of bioinspired and bio-based hybrid materials. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 354 KW - cellulose KW - polyamine KW - polyammonium salt KW - polycarboxylate KW - polyzwitterion KW - calcium phosphate KW - biomineralization KW - brushite KW - hydroyxapatite KW - biomaterial Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-400453 ER - TY - THES A1 - Muzdalo, Anja T1 - Thermal cis-trans isomerization of azobenzene studied by path sampling and QM/MM stochastic dynamics T1 - Untersuchung der thermisch aktivierten cis-trans Isomerisierung ausgewählter Azobenzole mit Hilfe von Transition Path Sampling und QM/MM-Molekulardynamik N2 - Azobenzene-based molecular photoswitches have extensively been applied to biological systems, involving photo-control of peptides, lipids and nucleic acids. The isomerization between the stable trans and the metastable cis state of the azo moieties leads to pronounced changes in shape and other physico-chemical properties of the molecules into which they are incorporated. Fast switching can be induced via transitions to excited electronic states and fine-tuned by a large number of different substituents at the phenyl rings. But a rational design of tailor-made azo groups also requires control of their stability in the dark, the half-lifetime of the cis isomer. In computational chemistry, thermally activated barrier crossing on the ground state Born-Oppenheimer surface can efficiently be estimated with Eyring’s transition state theory (TST) approach; the growing complexity of the azo moiety and a rather heterogeneous environment, however, may render some of the underlying simplifying assumptions problematic. In this dissertation, a computational approach is established to remove two restrictions at once: the environment is modeled explicitly by employing a quantum mechanical/molecular mechanics (QM/MM) description; and the isomerization process is tracked by analyzing complete dynamical pathways between stable states. The suitability of this description is validated by using two test systems, pure azo benzene and a derivative with electron donating and electron withdrawing substituents (“push-pull” azobenzene). Each system is studied in the gas phase, in toluene and in polar DMSO solvent. The azo molecules are treated at the QM level using a very recent, semi-empirical approximation to density functional theory (density functional tight binding approximation). Reactive pathways are sampled by implementing a version of the so-called transition path sampling method (TPS), without introducing any bias into the system dynamics. By analyzing ensembles of reactive trajectories, the change in isomerization pathway from linear inversion to rotation in going from apolar to polar solvent, predicted by the TST approach, could be verified for the push-pull derivative. At the same time, the mere presence of explicit solvation is seen to broaden the distribution of isomerization pathways, an effect TST cannot account for. Using likelihood maximization based on the TPS shooting history, an improved reaction coordinate was identified as a sine-cosine combination of the central bend angles and the rotation dihedral, r (ω,α,α′). The computational van’t Hoff analysis for the activation entropies was performed to gain further insight into the differential role of solvent for the case of the unsubstituted and the push-pull azobenzene. In agreement with the experiment, it yielded positive activation entropies for azobenzene in the DMSO solvent while negative for the push-pull derivative, reflecting the induced ordering of solvent around the more dipolar transition state associated to the latter compound. Also, the dynamically corrected rate constants were evaluated using the reactive flux approach where an increase comparable to the experimental one was observed for a high polarity medium for both azobenzene derivatives. N2 - Azobenzol-basierte molekulare Photoswitches wurden weitgehend auf biologische Systeme angewendet, die eine Photo-Kontrolle von Peptiden, Lipiden und Nukleinsäuren beinhalten. Die Isomerisierung zwischen dem stabilen trans und dem metastabilen cis-Zustand der Azogruppen führt zu ausgeprägten Form- und anderen physikalisch-chemischen Eigenschaften der Moleküle, in die sie eingebaut sind. Die schnelle Umschaltung kann über Übergänge in angeregte elektronische Zustände induziert und durch eine Vielzahl unterschiedlicher Substituenten an den Phenylringen fein abgestimmt werden. Aber ein rationales Design von maßgeschneiderten Azo-Gruppen erfordert auch die Kontrolle über ihre Stabilität im Dunkeln, die Halbwertszeit des cis-Isomers. In der Rechenchemie kann die thermisch aktivierte Barriereüberquerung auf dem Grundzustand Born-Oppenheimer-Oberfläche mit dem EST-Übergangstheorie-Theorie (TST) effizient geschätzt werden; Die zunehmende Komplexität der Azo-Einheit und eine ziemlich heterogene Umgebung kann jedoch einige der zugrunde liegenden vereinfachenden Annahmen problematisch machen. In dieser Dissertation wird ein rechnerischer Ansatz etabliert, um zwei Einschränkungen gleichzeitig zu beseitigen: Die Umgebung wird explizit modelliert, indem man eine quantenmechanische / molekulare Mechanik (QM / MM) Beschreibung verwendet; Und der Isomerisierungsprozess wird durch die Analyse vollständiger dynamischer Wege zwischen stabilen Zuständen verfolgt. Die Eignung dieser Beschreibung wird durch die Verwendung von zwei Testsystemen, reinem Azolbenzol und einem Derivat mit elektronenabgebenden und elektronenziehenden Substituenten ("Push-Pull" -Azobenzol) validiert. Jedes System wird in der Gasphase, in Toluol und im polaren DMSO-Lösungsmittel untersucht. Die Azomoleküle werden auf QM-Ebene unter Verwendung einer sehr jüngsten, halb-empirischen Approximation zur Dichtefunktionaltheorie (Dichtefunktionelle enge Bindungsnäherung) behandelt. Die reaktiven Wege werden durch die Implementierung einer Version des sogenannten Übergangsweg-Abtastverfahrens (TPS) abgetastet, ohne dass eine Vorspannung in die Systemdynamik eingeführt wird. Durch die Analyse von Ensembles von reaktiven Trajektorien konnte die Änderung des Isomerisierungsweges von der linearen Inversion zur Rotation, die von einem polaren zu einem polaren Lösungsmittel, das durch den TST-Ansatz vorhergesagt wurde, für das Push-Pull-Derivat verifiziert werden. Gleichzeitig wird die bloße Anwesenheit der expliziten Solvatisierung gesehen, um die Verteilung der Isomerisierungswege zu erweitern, ein Effekt, den TST nicht berücksichtigen kann. Unter Verwendung der Wahrscheinlichkeitsmaximierung auf der Grundlage der TPS-Schießhistorie wurde eine verbesserte Reaktionskoordinate als eine Sinus-Kosinus-Kombination der zentralen Biegewinkel und der Rotationsdichte identifiziert. Die rechnerische van't Hoff-Analyse für die Aktivierungsentropien wurde durchgeführt, um einen weiteren Einblick in die differentielle Rolle des Lösungsmittels für den Fall des unsubstituierten und des Push-Pull-Azobenzols zu erhalten. In Übereinstimmung mit dem Experiment lieferte es positive Aktivierungsentropien für Azobenzol in dem DMSO-Lösungsmittel, während es für das Push-Pull-Derivat negativ war, was die induzierte Anordnung des Lösungsmittels um den mehr dipolaren Übergangszustand, der mit der letzteren Verbindung assoziiert ist, widerspiegelt. Außerdem wurden die dynamisch korrigierten Geschwindigkeitskonstanten unter Verwendung des reaktiven Flussansatzes ausgewertet, bei dem ein für das Experimentiermittel vergleichbarer Anstieg für ein hochpolares Medium für beide Azobenzolderivate beobachtet wurde. KW - transition path sampling KW - thermal isomerization of azobenzene KW - QM/MM stochastic dynamics KW - reactive flux rate constants KW - activation entropy KW - solvent effect KW - thermisch angeregte Isomerisierung von Azobenzolen KW - QM/MM Molekulardynamik KW - DFTB3 KW - Aktivierungsentropie KW - "Reactive Flux" Ratenkonstanten KW - Reaktionsmechanismen KW - Lösungsmitteleffekte Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-405814 ER - TY - GEN A1 - Grunwald, Nicolas A1 - Kelling, Alexandra A1 - Holdt, Hans-Jürgen A1 - Schilde, Uwe T1 - The crystal structure of 1,1′-bisisoquinoline, C18H12N2 N2 - C18H12N2, tetragonal, I41/a (no. 88), a=13.8885(6) Å, c=13.6718(6) Å, V =2637.2(3) Å3, Z =8, Rgt(F)=0.0295, wRref(F2)=0.0854, T =210 K. CCDC no.: 631823 T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 380 Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-401952 ER - TY - THES A1 - Lorente Sánchez, Alejandro Jose T1 - Synthesis of side-chain polystyrenes for all organic solution processed OLEDs T1 - Synthese von Seitenketten-Polystyrolen für lösungsgefertigte OLEDs N2 - In the present work side-chain polystyrenes were synthesized and characterized, in order to be applied in multilayer OLEDs fabricated by solution process techniques. Manufacture of optoelectronic devices by solution process techniques is meant to decrease significantly fabrication cost and allow large scale production of such devices. This dissertation focusses in three series, enveloped in two material classes. The two classes differ to each other in the type of charge transport exhibited, either ambipolar transport or electron transport. All materials were applied in all-organic solution processed green Ir-based devices. In the first part, a series of ambipolar host materials were developed to transport both charge types, holes and electrons, and be applied especially as matrix for green Ir-based emitters. It was possible to increase devices efficacy by modulating the predominant charge transport type. This was achieved by modification of molecules electron transport part with more electron-deficient heterocycles or by extending the delocalization of the LUMO. Efficiencies up to 28.9 cd/A were observed for all-organic solution-process three layer devices. In the second part, suitability of triarylboranes and tetraphenylsilanes as electron transport materials was studied. High triplet energies were obtained, up to 2.95 eV, by rational combination of both molecular structures. Although the combination of both elements had a low effect in materials electron transport properties, high efficiencies around 24 cd/A were obtained for the series in all-organic solution-processed two layer devices. In the last part, benzene and pyridine were chosen as the series electron-transport motif. By controlling the relative pyridine content (RPC) solubility into methanol was induced for polystyrenes with bulky side-chains. Materials with RPC ≥ 0.5 could be deposited orthogonally from solution without harming underlying layers. From the best of our knowledge, this is the first time such materials are applied in this architecture showing moderate efficiencies around 10 cd/A in all-organic solution processed OLEDs. Overall, the outcome of these studies will actively contribute to the current research on materials for all-solution processed OLEDs. N2 - Organische Licht emittierende Dioden (OLEDs) gelten als die nächste Technologie für Beleuchtungsanwendungen. In letzter Zeit wurden immer mehr kommerzielle Produkte herausgebracht, für die Anwendung in Displays und Beleuchtungssystemen. Doch diese Produkte werden hauptsächlich durch Vakuumabscheidung der organischen Moleküle hergestellt, was hohe Fertigungskosten zur Folge hat. Um die Kosten zu senken, sollten die Geräte über Lösungsverfahren hergestellt werden, was die Produktion durch Drucktechniken ermöglicht. Allerdings gibt es noch einige Herausforderungen bei den Lösungsprozessen, auch bei der Verarbeitung bekannter Materialien, die überwunden werden müssen, wie Rekristallisation oder schlechte Filmbildung. Deshalb sind weitere Materialmodifikationen erforderlich. Ein sehr verbreiteter Ansatz ist die Einarbeitung von Materialien, die im Vakuum verarbeitet werden können, wie Seitenkettenpolymer-Rückgräte. Wir haben in dieser Arbeit drei Reihen von Seitenketten-Polystyrolen synthetisiert und charakterisiert. Die Polymere der ersten Reihe sollten als Hostmaterialien für phosphoreszierende Emitter in der Emissionsschicht dienen. Die Polymere der zweiten und dritten Reihe fungierten als Elektron-Transport-Materialien. Die Polymereigenschaften wurden durch Änderungen der molekularen Struktur der Seitenketten modifiziert. Von allen Materialien wurden dünne Schichten aus Lösung abgeschieden und diese on grünen Ir-basierten OLEDs untersucht. Für alle organischen, aus Lösung gefertigten OLEDs wurden Effizienzen von bis zu 28,9 cd/A erreicht. KW - OLED KW - solution process KW - charge transport KW - polymers KW - OLED KW - Lösungsprozess KW - Ladung Transport KW - Polymere Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-398006 ER - TY - THES A1 - Pavashe, Prashant T1 - Synthesis and transformations of 2-thiocarbohydrates T1 - Synthese und Transformationen von 2-Thiokohlenhydraten BT - a practical approach for functionalization of thiosugars BT - ein Praktischer Zugang zur Funktionalisierung von Thiozuckern N2 - I. Ceric ammonium nitrate (CAN) mediated thiocyanate radical additions to glycals In this dissertation, a facile entry was developed for the synthesis of 2-thiocarbohydrates and their transformations. Initially, CAN mediated thiocyanation of carbohydrates was carried out to obtain the basic building blocks (2-thiocyanates) for the entire studies. Subsequently, 2-thiocyanates were reduced to the corresponding thiols using appropriate reagents and reaction conditions. The screening of substrates, stereochemical outcome and the reaction mechanism are discussed briefly (Scheme I). Scheme I. Synthesis of the 2-thiocyanates II and reductions to 2-thiols III & IV. An interesting mechanism was proposed for the reduction of 2-thiocyanates II to 2-thiols III via formation of a disulfide intermediate. The water soluble free thiols IV were obtained by cleaving the thiocyanate and benzyl groups in a single step. In the subsequent part of studies, the synthetic potential of the 2-thiols was successfully expanded by simple synthetic transformations. II. Transformations of the 2-thiocarbohydrates The 2-thiols were utilized for convenient transformations including sulfa-Michael additions, nucleophilic substitutions, oxidation to disulfides and functionalization at the anomeric position. The diverse functionalizations of the carbohydrates at the C-2 position by means of the sulfur linkage are the highlighting feature of these studies. Thus, it creates an opportunity to expand the utility of 2-thiocarbohydrates for biological studies. Reagents and conditions: a) I2, pyridine, THF, rt, 15 min; b) K2CO3, MeCN, rt, 1 h; c) MeI, K2CO3, DMF, 0 °C, 5 min; d) Ac2O, H2SO4 (1 drop), rt, 10 min; e) CAN, MeCN/H2O, NH4SCN, rt, 1 h; f) NaN3, ZnBr2, iPrOH/H2O, reflux, 15 h; g) NaOH (1 M), TBAI, benzene, rt, 2 h; h) ZnCl2, CHCl3, reflux, 3 h. Scheme II. Functionalization of 2-thiocarbohydrates. These transformations have enhanced the synthetic value of 2-thiocarbohydrates for the preparative scale. Worth to mention is the Lewis acid catalyzed replacement of the methoxy group by other nucleophiles and the synthesis of the (2→1) thiodisaccharides, which were obtained with complete β-selectivity. Additionally, for the first time, the carbohydrate linked thiotetrazole was synthesized by a (3 + 2) cycloaddition approach at the C-2 position. III. Synthesis of thiodisaccharides by thiol-ene coupling. In the final part of studies, the synthesis of thiodisaccharides by a classical photoinduced thiol-ene coupling was successfully achieved. Reagents and conditions: 2,2-Dimethoxy-2-phenylacetophenone (DPAP), CH2Cl2/EtOH, hv, rt. Scheme III. Thiol-ene coupling between 2-thiols and exo-glycals. During the course of investigations, it was found that the steric hindrance plays an important role in the addition of bulky thiols to endo-glycals. Thus, we successfully screened the suitable substrates for addition of various thiols to sterically less hindered alkenes (Scheme III). The photochemical addition of 2-thiols to three different exo-glycals delivered excellent regio- and diastereoselectivities as well as yields, which underlines the synthetic potential of this convenient methodology. N2 - I. Cerammoniumnitrat (CAN) vermittelte Thiocyanat Radikaladditionen an Glycale In dieser Dissertation wurde ein einfacher synthetischer Zugang zu 2-Thiokohlenhydraten und dessen Transformationsprodukten entwickelt. Zu Beginn wurden CAN vermittelte Funktionalisierungen von Kohlenhydraten mit Thiocyanat durchgeführt, um die notwendigen Ausgangsverbindungen (2-Thiocyanate) für die weiteren Studien zu erhalten. Im Folgenden wurden diese 2-Thiocyanate mit entsprechenden Reagenzien unter geeigneten Reduktionsbedingungen zu den Thiolen reduziert. Das Screening der Substrate, der stereochemische Verlauf und der Reaktionsmechanismus wird kurz diskutiert (Schema I). Schema I. Synthese der 2-Thiocyanate II und Reduktionen zu den 2-Thiolen III & IV. Es wurde ein interessanter Mechanismus für die Reduktion der 2-Thiocyanate II zu den 2-Thiolen III via Bildung von Disulfid-Zwischenstufen vorgeschlagen. Die wasserlöslichen freien Thiole IV wurden durch Spaltung der Thiocyanat- und Benzylgruppen in einem Einzelschritt freigesetzt. Im darauf folgenden Teil der Arbeit wurde das synthetische Potenzial der 2-Tiole erfolgreich durch einfache synthetische Transformationen erweitert. II. Transformationen der 2-Thiokohlenhydrate Die 2-Thiole wurden für die Ausführung praktischer Transformationen eingesetzt, die Sulfa-Michael Additionen, nukleophile Substitutionen, Oxidationen zu Disulfiden und Funktionalisierungen an der anomeren Position beinhalten. Die mannigfaltigen Funktionalisierungen der Kohlenhydrate an den C-2 Positionen mittels der Schwefel Gruppe ist das hervortretende Merkmal dieser Arbeit. Reagenzien und Reaktionsbedingungen: a) I2, Pyridin, THF, rt, 15 min; b) K2CO3, MeCN, rt, 1 h; c) MeI, K2CO3, DMF, 0 °C, 5 min; d) Ac2O, H2SO4 (1 Tropfen), rt, 10 min; e) CAN, MeCN/H2O, NH4SCN, rt, 1 h; f) NaN3; ZnBr2; iPrOH/H2O, Rückfluss 15 h; g) NaOH (1 M), TBAI, Benzol, rt 2 h; h) ZnCl2, CHCl3, Rückfluss, 3 h. Schema II. Funktionalisierungen von 2-Thiokohlenhydraten Daraus eröffnet sich die Möglichkeit, den Nutzwert von 2-Thiokohlenhydraten auf biologische Studien auszuweiten. Diese Transformationen haben den synthetischen Wert von 2-Thiokohlenhydraten für den präparativen Maßstab gesteigert. Hervorzuheben ist hier der Lewis Säure katalysierte Austausch der Methoxygruppe durch weitere Nukleophile und die Synthese von (2→1) Thiodisacchariden, die mit quantitativer β-Selektivität erhalten wurden. Zusätzlich wurde zum ersten Mal ein Zucker gebundenes Thiotetrazol über eine (3+2) Cycloaddition an der C-2 Position synthetisiert. III. Synthese von Thiodisacchariden durch Thiol-En-Kopplungen Im letzten Teil der Arbeit gelang die Synthese von Thiodisacchariden durch eine klassische Thiol-En-Kopplung. Reagenzien und Reaktionsbedingungen: 2,2-Dimethoxy-2-phenylacetophenone (DPAP), CH2Cl2/EtOH, hv, rt. Schema III. Thiol-En-Kopplungen zwischen 2-Thiolen und exo-Glycalen. Im Verlauf der Untersuchungen wurde aufgezeigt, dass die räumlische Hinderung bei der Addition von sterisch anspruchsvollen 2-Thiolen an endo-Glycale eine wichtige Rolle spielt. Dazu erprobten wir geeignete Substrate zur Addition von 2-Thiolen an sterisch wenig anspruchsvolle Alkene (Schema III). Die photochemische Addition der 2-Thiole an drei verschiedene exo-Glycale lieferte exzellente Regio- und Diastereoselektivitäten und Ausbeuten, was das synthetische Potenzial dieser bequem durchführbaren Methodik unterstreicht. KW - carbohydrates KW - 2-Thiodisaccharides KW - radical reactions KW - Ceric Ammonium Nitrate (CAN) KW - photochemistry KW - Kohlenhydrate KW - 2-Thiodisaccharide KW - Radikalreaktionen KW - Cer Ammonium Nitrat (CAN) KW - Photochemie Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-397739 ER - TY - GEN A1 - Adamovich, Sergey N. A1 - Mirskova, Anna N. A1 - Mirskov, Rudolf G. A1 - Schilde, Uwe T1 - Synthesis and crystal structure of 1,4,10,13-tetraoxa-7,16-diazoniumcyclo-octadecane bis(4-chloro-2-methyl-phenoxyacetate) N2 - The title compound was prepared by the reaction of 1,4,10,13-tetraoxa-7,16-diazacyclo-octadecane with 4-chloro-2-methyl-phenoxyacetic acid in a ratio of 1:2. The structure has been proved by the data of elemental analysis, IR spectroscopy, NMR ( 1 H, 13 C) technique and by X-ray diffraction analysis. Intermolecular hydrogen bonds between the azonium protons and oxygen atoms of the carboxylate groups were found. Immunoactive properties of the title compound have been screened. The compound has the ability to suppress spontaneous and Con A-stimulated cell proliferation in vitro and therefore can be considered as immunodepressant. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 369 KW - salts Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-400905 ER - TY - THES A1 - Doriti, Afroditi T1 - Sustainable bio-based poly-N-glycines and polyesters T1 - Nachhaltige biobasierte Poly-N-Glycine und Polyester N2 - Nowadays, the need to protect the environment becomes more urgent than ever. In the field of chemistry, this translates to practices such as waste prevention, use of renewable feedstocks, and catalysis; concepts based on the principles of green chemistry. Polymers are an important product in the chemical industry and are also in the focus of these changes. In this thesis, more sustainable approaches to make two classes of polymers, polypeptoids and polyesters, are described. Polypeptoids or poly(alkyl-N-glycines) are isomers of polypeptides and are biocompatible, as well as degradable under biologically relevant conditions. In addition to that, they can have interesting properties such as lower critical solution temperature (LCST) behavior. They are usually synthesized by the ring opening polymerization (ROP) of N-carboxy anhydrides (NCAs), which are produced with the use of toxic compounds (e.g. phosgene) and which are highly sensitive to humidity. In order to avoid the direct synthesis and isolation of the NCAs, N-phenoxycarbonyl-protected N-substituted glycines are prepared, which can yield the NCAs in situ. The conditions for the NCA synthesis and its direct polymerization are investigated and optimized for the simplest N-substituted glycine, sarcosine. The use of a tertiary amine in less than stoichiometric amounts compared to the N-phenoxycarbonyl--sarcosine seems to accelerate drastically the NCA formation and does not affect the efficiency of the polymerization. In fact, well defined polysarcosines that comply to the monomer to initiator ratio can be produced by this method. This approach was also applied to other N-substituted glycines. Dihydroxyacetone is a sustainable diol produced from glycerol, and has already been used for the synthesis of polycarbonates. Here, it was used as a comonomer for the synthesis of polyesters. However, the polymerization of dihydroxyacetone presented difficulties, probably due to the insolubility of the macromolecular chains. To circumvent the problem, the dimethyl acetal protected dihydroxyacetone was polymerized with terephthaloyl chloride to yield a soluble polymer. When the carbonyl was recovered after deprotection, the product was insoluble in all solvents, showing that the carbonyl in the main chain hinders the dissolution of the polymers. The solubility issue can be avoided, when a 1:1 mixture of dihydroxyacetone/ ethylene glycol is used to yield a soluble copolyester. N2 - Heutzutage wird die Notwendigkeit, die Umwelt zu schützen, dringender denn je. Auf dem Gebiet der Chemie bedeutet dies Praktiken wie Abfallvermeidung, Verwendung nachwachsender Rohstoffe und Katalyse, Konzepte, die auf den Prinzipien der grünen Chemie basierend sind. Polymere sind ein wichtiges Produkt in der chemischen Industrie und stehen auch im Fokus dieser Veränderungen. In dieser Arbeit werden nachhaltigere Ansätze zur Herstellung von zwei Klassen von Polymeren, Polypeptoiden und Polyestern beschrieben. Polypeptoide oder Poly (alkyl-N-glycine) sind Isomere von Polypeptiden und sind biokompatibel sowie unter biologisch relevanten Bedingungen abbaubar. Darüber hinaus können sie interessante Eigenschaften wie das LCST-Verhalten (Lower Critical Solution Temperature) aufweisen. Sie werden üblicherweise durch die Ringöffnungspolymerisation (ROP) von N-Carboxyanhydriden (NCAs) synthetisiert, die unter Verwendung von toxischen Verbindungen (z. B. Phosgen) hergestellt werden und die gegenüber Feuchtigkeit sehr empfindlich sind. Um die direkte Synthese und Isolierung der NCAs zu vermeiden, werden N-Phenoxycarbonyl-geschützte N-substituierte Glycine hergestellt, die die NCAs in situ liefern können. Die Bedingungen für die NCA-Synthese und ihre direkte Polymerisation wurden für das einfachste N-substituierte Glycin, Sarcosin, untersucht und optimiert. Die Verwendung eines tertiären Amins in weniger als stöchiometrischen Mengen im Vergleich zum N-Phenoxycarbonyl-Sarkosin scheint die NCA-Bildung drastisch zu beschleunigen und beeinflusst die Effizienz der Polymerisation nicht. In der Tat können mit diesem Verfahren gut definierte Polysarkosine hergestellt werden, die dem Verhältnis von Monomer zu Initiator entsprechen. Dieser Ansatz wurde auch auf andere N-substituierte Glycine angewendet. Dihydroxyaceton ist ein aus Glycerin hergestelltes, nachhaltiges Diol, das bereits für die Synthese von Polycarbonaten verwendet wurde. Hier wurde es als Comonomer für die Synthese von Polyestern verwendet. Die Polymerisation von Dihydroxyaceton zeigte jedoch Schwierigkeiten, wahrscheinlich aufgrund der Unlöslichkeit der makromolekularen Ketten. Um das Problem zu umgehen, wurde das Dimethylacetal-geschützte Dihydroxyaceton mit Terephthaloylchlorid polymerisiert, um ein lösliches Polymer zu ergeben. Wenn das Carbonyl nach der Entschützung zurückgewonnen wurde, war das Produkt in allen Lösungsmitteln unlöslich, was zeigt, dass das Carbonyl in der Hauptkette das Lösen der Polymere behindert. Das Löslichkeitsproblem kann vermieden werden, wenn eine 1: 1-Mischung von Dihydroxyaceton / Ethylenglycol verwendet wird, um einen löslichen Copolyester zu ergeben. KW - ROP KW - N-alkyl-glycine KW - polypeptoids KW - activated urethane KW - dihydroxyacetone KW - polycondensation KW - polyesters KW - Ringöffnungspolymerisation KW - N-Alkylglycin KW - Polypeptoide KW - aktiviertes Urethan KW - Dihydroxyaceton KW - Polykondensation KW - Polyester Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-411286 ER - TY - THES A1 - Willersinn, Jochen T1 - Self-Assembly of double hydrophilic block copolymers T1 - Selbstorganisation Doppelt Hydrophiler Blockcopolymere BT - organized particles and vesicles beyond amphiphiles BT - organisierte Partikel und Vesikel jenseits von Amphiphilen N2 - The motivation of this work was to investigate the self-assembly of a block copolymer species that attended little attraction before, double hydrophilic block copolymers (DHBCs). DHBCs consist of two linear hydrophilic polymer blocks. The self-assembly of DHBCs towards suprastructures such as particles and vesicles is determined via a strong difference in hydrophilicity between the corresponding blocks leading to a microphase separation due to immiscibility. The benefits of DHBCs and the corresponding particles and vesicles, such as biocompatibility, high permeability towards water and hydrophilic compounds as well as the large amount of possible functionalizations that can be addressed to the block copolymers make the application of DHBC based structures a viable choice in biomedicine. In order to assess a route towards self-assembled structures from DHBCs that display the potential to act as cargos for future applications, several block copolymers containing two hydrophilic polymer blocks were synthesized. Poly(ethylene oxide)-b-poly(N-vinylpyrrolidone) (PEO-b-PVP) and Poly(ethylene oxide)-b-poly(N-vinylpyrrolidone-co-N-vinylimidazole) (PEO-b-P(VP-co-VIm) block copolymers were synthesized via reversible deactivation radical polymerization (RDRP) techniques starting from a PEO-macro chain transfer agent. The block copolymers displayed a concentration dependent self-assembly behavior in water which was determined via dynamic light scattering (DLS). It was possible to observe spherical particles via laser scanning confocal microscopy (LSCM) and cryogenic scanning electron microscopy (cryo SEM) at highly concentrated solutions of PEO-b-PVP. Furthermore, a crosslinking strategy with (PEO-b-P(VP-co-VIm) was developed applying a diiodo derived crosslinker diethylene glycol bis(2-iodoethyl) ether to form quaternary amines at the VIm units. The formed crosslinked structures proved stability upon dilution and transfer into organic solvents. Moreover, self-assembly and crosslinking in DMF proved to be more advantageous and the crosslinked structures could be successfully transferred to aqueous solution. The afforded spherical submicron particles could be visualized via LSCM, cryo SEM and Cryo TEM. Double hydrophilic pullulan-b-poly(acrylamide) block copolymers were synthesized via copper catalyzed alkyne azide cycloaddition (CuAAC) starting from suitable pullulan alkyne and azide functionalized poly(N,N-dimethylacrylamide) (PDMA) and poly(N-ethylacrylamide) (PEA) homopolymers. The conjugation reaction was confirmed via SEC and 1H-NMR measurements. The self-assembly of the block copolymers was monitored with DLS and static light scattering (SLS) measurements indicating the presence of hollow spherical structures. Cryo SEM measurements could confirm the presence of vesicular structures for Pull-b-PEA block copolymers. Solutions of Pull-b-PDMA displayed particles in cryo SEM. Moreover, an end group functionalization of Pull-b-PDMA with Rhodamine B allowed assessing the structure via LSCM and hollow spherical structures were observed indicating the presence of vesicles, too. An exemplified pathway towards a DHBC based drug delivery vehicle was demonstrated with the block copolymer Pull-b-PVP. The block copolymer was synthesized via RAFT/MADIX techniques starting from a pullulan chain transfer agent. Pull-b-PVP displayed a concentration dependent self-assembly in water with an efficiency superior to the PEO-b-PVP system, which could be observed via DLS. Cryo SEM and LSCM microscopy displayed the presence of spherical structures. In order to apply a reversible crosslinking strategy on the synthesized block copolymer, the pullulan block was selectively oxidized to dialdehydes with NaIO4. The oxidation of the block copolymer was confirmed via SEC and 1H-NMR measurements. The self-assembled and oxidized structures were subsequently crosslinked with cystamine dihiydrochloride, a pH and redox responsive crosslinker resulting in crosslinked vesicles which were observed via cryo SEM. The vesicular structures of crosslinked Pull-b-PVP could be disassembled by acid treatment or the application of the redox agent tris(2-carboxyethyl)-phosphin-hydrochloride. The successful disassembly was monitored with DLS measurements. To conclude, self-assembled structures from DHBCs such as particles and vesicles display a strong potential to generate an impact on biomedicine and nanotechnologies. The variety of DHBC compositions and functionalities are very promising features for future applications. N2 - Die Selbstanordnung von amphiphilen Blockcopolymeren in Wasser zu Strukturen höherer Ordnung, wie Partikel oder Vesikel, ist seit vielen Jahren bekannt und findet Anwendung in vielen Aspekten der Medizin und Materialwissenschaft. Allerdings ist die treibende Kraft dieser Selbstanordnung zu Vesikeln, die Hydrophobie des wasserunlöslichen Polmyerblocks, auch ein Hindernis für den gezielten Transport von neuen Medikamenten und Wirkstoffen, da die Membran dieser Vesikel aufgrund des hydrophoben Anteils sehr dicht gepackt ist und eine Diffusion der Wirkstoffe durch diese Membran häufig nur durch hohen synthetischen Aufwand gewährleistet werden kann. Einen möglichen Ausweg bietet die Anwendung von doppelt hydrophilen Blockcopolymeren (DHBCs), respektive Blockcopolymere die aus zwei Polymerblöcken mit unterschiedlicher Hydrophilie bestehen. Ist dieser Unterschied groß genug, können DHBCs Partikel- und Vesikelstrukturen ausbilden, die denen der amphiphilen Blockcopolymere ähnlich sind. Um das Potential von DHBC Strukturen zu untersuchen und einen tieferen Einblick in die fundamentalen Prinzipien dieser Selbstanordnung zu erhalten, wurden in dieser Arbeit fünf verschiedene Blockcopolymere hergestellt. Poly(Ethylenoxid)-b-Poly(N-Vinylpyrrolidon) und Poly(Ethylenoxid)-b-Poly(N-Vinylpyrrolidon-co-N-Vinylimidazol) Blockcopolymere wurden über eine kontrollierte radikalische Polymerisation hergestellt und zeigten eine konzentrationsabhängige Selbstanordnung zu Partikeln mit Größen unter einem Mikrometer. Diese Partikel konnten vernetzt werden, sodass sie auch bei starker Verdünnung nicht zerfallen. Zwei Pullulan-b-Poly(Acrylamid) Blockcopolymere wurden über eine Konjugationsreaktion hergestellt, die die beiden separaten Polymerblöcke miteinander verbindet. Diese Blockcopolymere ordneten sich in Wasser zu Vesikulären Strukturen mit Größen zwischen 250 nm und 500 nm. Des Weiteren war es möglich, einen Farbstoff an ein Blockcopolymer anzubringen und den vesikulären Charakter mit konfokaler Mikroskopie zu untersuchen. Ein Ausblick auf mögliche medizinische Anwendung von DHBCs wurde mit dem letzten Blockcopolymer Pullulan-b-Poly(N-Vinylpyrrolidon) gegeben. Vesikel aus diesem Blockcopolymer wurden mit einem pH- und Redox-responsivem Vernetzer vernetzt und es wurde gezeigt, dass sich die vesikulären Strukturen durch Säurebehandlung zersetzen lassen. Dieses System veranschaulicht die theoretische Anwendungsmöglichkeit von DHBCs im gezielten Medikamententransport. KW - self-assembly KW - double hydrophilic block copolymers KW - polymer chemistry KW - RAFT/MADIX polymerization KW - block copolymer vesicles KW - Selbstorganisation KW - Doppelt hydrophile Blockcopolymere KW - Polymerchemie KW - RAFT/MADIX Polymerisation KW - Blockcopolymervesikel Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-408578 ER - TY - THES A1 - Charan, Himanshu T1 - Self assembled transmembrane protein polymer conjugates for the generation of nano thin membranes and micro compartments T1 - Selbstassemblierte Transmembranprotein-Polymer Konjugate für die Herstellung von nanodünnen Membranen und Mikrokompartimenten N2 - This project was focused on generating ultra thin stimuli responsive membranes with an embedded transmembrane protein to act as the pore. The membranes were formed by crosslinking of transmembrane protein polymer conjugates. The conjugates were self assembled on air water interface and the polymer chains crosslinked using a UV crosslinkable comonomer to engender the membrane. The protein used for the studies reported herein was one of the largest transmembrane channel proteins, ferric hydroxamate uptake protein component A (FhuA), found in the outer membrane of Escherichia coli (E. coli). The wild type protein and three genetic variants of FhuA were provided by the group of Prof. Schwaneberg in Aachen. The well known thermo responsive poly(N isopropylacrylamide) (PNIPAAm) and the pH and thermo responsive polymer poly((2-dimethylamino)ethyl methacrylate) (PDMAEMA) were conjugated to FhuA and the genetic variants via controlled radical polymerization (CRP) using grafting from technique. These polymers were chosen because they would provide stimuli handles in the resulting membranes. The reported polymerization was the first ever attempt to attach polymer chains onto a membrane protein using site specific modification. The conjugate synthesis was carried out in two steps – a) FhuA was first converted into a macroinitiator by covalently linking a water soluble functional CRP initiator to the lysine residues. b) Copper mediated CRP was then carried out in pure buffer conditions with and without sacrificial initiator to generate the conjugates. The challenge was carrying out the modifications on FhuA without denaturing it. FhuA, being a transmembrane protein, requires amphiphilic species to stabilize its highly hydrophobic transmembrane region. For the experiments reported in this thesis, the stabilizing agent was 2 methyl 2,4-pentanediol (MPD). Since the buffer containing MPD cannot be considered a purely aqueous system, and also because MPD might interfere with the polymerization procedure, the reaction conditions were first optimized using a model globular protein, bovine serum albumin (BSA). The optimum conditions were then used for the generation of conjugates with FhuA. The generated conjugates were shown to be highly interfacially active and this property was exploited to let them self assemble onto polar apolar interfaces. The emulsions stabilized by particles or conjugates are referred to as Pickering emulsions. Crosslinking conjugates with a UV crosslinkable co monomer afforded nano thin micro compartments. Interfacial self assembly at the air water interface and subsequent UV crosslinking also yielded nano thin, stimuli responsive membranes which were shown to be mechanically robust. Initial characterization of the flux and permeation of water through these membranes is also reported herein. The generated nano thin membranes with PNIPAAm showed reduced permeation at elevated temperatures owing to the resistance by the hydrophobic and thus water-impermeable polymer matrix, hence confirming the stimulus responsivity. Additionally, as a part of collaborative work with Dr. Changzhu Wu, TU Dresden, conjugates of three enzymes with current/potential industrial relevance (candida antarctica lipase B, benzaldehyde lyase and glucose oxidase) with stimuli responsive polymers were synthesized. This work aims at carrying out cascade reactions in the Pickering emulsions generated by self assembled enzyme polymer conjugate. N2 - Im Rahmen dieses Projekts wurden ultradünne Stimuli responsive Membranen hergestellt, in die ein Transmembranprotein als Pore eingebettet ist. Die Membranen wurden durch das Verlinken von Transmembranprotein-Polymer Konjugaten an Grenzflächen hergestellt. Dazu wurden Konjugate an der Luft-Wasser-Grenzfläche selbstassembliert und die Polymerketten unter Verwendung eines UV-vernetzbaren Comonomers vernetzt. Als Protein wurde einer der größten Transmembran-Proteinkanäle, welcher sich in der Natur in der äußeren Membran von Escherichia coli (E. coli) findet, verwendet, nämlich ferric hydroxamate uptake protein component A (FhuA). Das Wildtyp-Protein und drei genetische Varianten von FhuA wurden von der Gruppe von Prof. Schwaneberg in Aachen zur Verfügung gestellt. Das bekannte thermo responsive Poly(N-isopropylacrylamid) (PNIPAAm) und das pH- und thermo responsive Polymer Poly((2-dimethylamino) ethylmethacrylat) (PDMAEMA) wurden über kontrollierte radikalische Polymerisationen (CRP) via der grafting-from Technik an FhuA und die genetischen Varianten konjugiert. Diese responsiven Polymere wurden ausgewählt, weil die Eigenschaften der resultierenden Membranen folglich durch äußere Einflusse verändert werden können. Dabei handelt es sich um das erste Beispiel, Polymerketten von einem Membranprotein ortsspezifisch zu synthetisieren. Die Konjugatsynthese wurde in zwei Schritten durchgeführt - a) zuerst wurde ein FhuA Makroinitiator durch Anbinden funktioneller CRP Initiatoren an die Lysinreste des Proteins dargestellt. B) durch Kupfer-vermittelte CRP wurden dann in Pufferlösung sowohl mit als auch ohne Opferinitiator die Konjugate synthetisiert. Die Herausforderung bestand darin, FhuA zu modifizieren ohne das Protein dabei zu denaturieren. Als Transmembranprotein benötigt FhuA amphiphile Agentien, um seine hydrophobe Transmembran Region zu stabilisieren. Für die im Rahmen dieser Arbeit durchgeführten Experimente war das stabilisierende Agens 2-Methyl-2,4-pentandiol (MPD). Da der MPD-Puffer nicht als rein wässriges Medium betrachtet werden kann, und auch, weil MPD das Polymerisationsverfahren beeinflussen könnte, wurden die Reaktionsbedingungen zunächst unter Verwendung eines globulären Modellproteins, nämlich Rinderserumalbumin (BSA), optimiert. Die optimalen Bedingungen wurden dann für die Erzeugung von Konjugaten mit FhuA verwendet. Die Konjugate zeigten eine hohe Grenzflächenaktivität und diese Eigenschaft wurde für die Selbstassemblierung an polaren/apolaren Grenzflächen ausgenutzt. Wurden Emulsionen durch die Konjugate stabilisiert, so bezeichnet man dies als Pickering-Emulsionen. Das Vernetzen von Konjugaten mit einem UV-vernetzbaren Co-Monomer führt zu nano-dünnen Mikrokompartimenten. Die Selbstassemblierung an der Luft-Wasser-Grenzfläche und anschließende UV-Vernetzung ergaben nano-dünne, Stimuli-responsive Membranen, die sich als mechanisch robust erwiesen. Eine erste Charakterisierung des Flusses und der Permeation von Wasser durch die Membranen wird ebenfalls in dieser Arbeit beschrieben. Die erzeugten nano dünnen Membranen mit PNIPAAm zeigten eine verminderte Permeation bei erhöhten Temperaturen aufgrund der nun hydrophoben und damit wasserundurchlässigen Polymermatrix. Darüber hinaus wurden für eine Kooperation mit Dr. Changzhu Wu, TU Dresden, Konjugate von drei Enzymen mit industrieller Relevanz (Candida antarctica Lipase B, Benzaldehydlyase und Glucose-Oxidase) synthetisiert. Diese Arbeit zielt auf Kaskadenreaktionen in Pickering-Emulsionen, die durch selbstassemblierte Enzym-Polymer Konjugate katalysiert werden. KW - FhuA KW - transmembrane protein KW - protein-polymer conjugate KW - controlled radical polymerization KW - ultra-thin membrane KW - FhuA KW - Transmembranprotein KW - Protein-Polymer Konjugaten KW - kontrollierte radikalische Polymerisationen KW - ultradünne Membranen Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-402060 SP - xii, 138 ER - TY - GEN A1 - Mirskova, Anna N. A1 - Adamovich, Sergey N. A1 - Mirskov, Rudolf G. A1 - Schilde, Uwe T1 - Reaction of pharmacological active tris-(2-hydroxyethyl)ammonium 4-chlorophenylsulfanylacetate with ZnCl2 or NiCl2 BT - first conversion of a protic ionic liquid into metallated ionic liquid N2 - The reaction of pharmacological active protic ionic liquid tris-(2-hydroxyethyl)ammonium 4-chlorophenylsulfanylacetate H + N(CH 2 CH 2 OH) 3 ∙ ( - OOCCH 2 SC 6 H 4 Cl-4) (1) with zinc or nickel chloride in a ratio of 2:1 affords stable at room temperature powder-like adducts [H + N(CH 2 CH 2 OH) 3 ] 2 ∙ [M(OOCCH 2 SC 6 H 4 Cl-4) 2 Cl 2 ] 2- , M = Zn (2), Ni (3). By recrystallization from aqueous alcohol compound 2 unexpectedly gives Zn(OOCCH 2 SC 6 H 4 Cl-4) 2 ∙ 2H 2 O (4). Unlike 2, compound 3 gives crystals [N(CH 2 CH 2 OH) 3 ] 2 Ni 2+ · [ - OOCCH 2 SC 6 H 4 Cl-4] 2 (5), which have a structure of metallated ionic liquid. The structure of 5 has been proved by X-ray diffraction analysis. It is the first example of the conversion of a protic ionic liquid into potentially biological active metallated ionic liquid (1 → 3 → 5). T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 377 KW - Formate KW - Salts KW - Acids Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-401099 ER - TY - THES A1 - Titov, Evgenii T1 - Quantum chemistry and surface hopping dynamics of azobenzenes T1 - Quantenchemie und Surface Hopping Dynamik von Azobenzolen BT - free and constrained models BT - freie und eingeschränkte Modelle N2 - This cumulative doctoral dissertation, based on three publications, is devoted to the investigation of several aspects of azobenzene molecular switches, with the aid of computational chemistry. In the first paper, the isomerization rates of a thermal cis → trans isomerization of azobenzenes for species formed upon an integer electron transfer, i.e., with added or removed electron, are calculated from Eyring’s transition state theory and activation energy barriers, computed by means of density functional theory. The obtained results are discussed in connection with an experimental study of the thermal cis → trans isomerization of azobenzene derivatives in the presence of gold nanoparticles, which is demonstrated to be greatly accelerated in comparison to the same isomerization reaction in the absence of nanoparticles. The second paper is concerned with electronically excited states of (i) dimers, composed of two photoswitchable units placed closely side-by-side, as well as (ii) monomers and dimers adsorbed on a silicon cluster. A variety of quantum chemistry methods, capable of calculating molecular electronic absorption spectra, based on density functional and wave function theories, is employed to quantify changes in optical absorption upon dimerization and covalent grafting to a surface. Specifically, the exciton (Davydov) splitting between states of interest is determined from first-principles calculations with the help of natural transition orbital analysis, allowing for insight into the nature of excited states. In the third paper, nonadiabatic molecular dynamics with trajectory surface hopping is applied to model the photoisomerization of azobenzene dimers, (i) for the isolated case (exhibiting the exciton coupling between two molecules) as well as (ii) for the constrained case (providing the van der Waals interaction with environment in addition to the exciton coupling between two monomers). For the latter, the additional azobenzene molecules, surrounding the dimer, are introduced, mimicking a densely packed self-assembled monolayer. From obtained results it is concluded that the isolated dimer is capable of isomerization likewise the monomer, whereas the steric hindrance considerably suppresses trans → cis photoisomerization. Furthermore, the present dissertation comprises the general introduction describing the main features of the azobenzene photoswitch and objectives of this work, theoretical basis of the employed methods, and discussion of gained findings in the light of existing literature. Also, additional results on (i) activation parameters of the thermal cis → trans isomerization of azobenzenes, (ii) an approximate scheme to account for anharmonicity of molecular vibrations in calculation of the activation entropy, as well as (iii) absorption spectra of photoswitch–silicon composites obtained from time-demanding wave function-based methods are presented. N2 - Die vorliegende kumulative Dissertationsschrift basiert auf drei wissenschaftlichen Publikationen und beschäftigt sich mit der computerchemischen Erforschung von molekularen Azobenzol-Schaltern. Die erste Publikation behandelt die thermische cis → trans Isomerisierung von Azobenzol durch einen Elektronentransfer (ein Elektron wird hinzugefügt oder entnommen). Dabei ist die Berechnung der Isomerisierungsrate des Elektronenübergangs nach der Eyringschen Theorie des Übergangszustands unter Einsatz von Aktivierungsenenergien durchgeführt worden. Die Letzteren sind mittels Dichtefunktionaltheorie berechnet worden. Die daraus erhaltenen Ergebnisse sind in Zusammenhang mit experimentellen Untersuchungen der thermische cis → trans Isomerisierung von Azobenzol-Derivaten in Lösung mit und ohne Goldnanopartikeln diskutiert worden. Die thermische Isomerisierung in Anwesenheit der Goldnanopartikeln läuft stark beschleunigt ab. Die zweite Publikation beschäftigt sich mit elektronisch angeregten Zuständen von (i) Dimeren bestehend aus zwei schaltbaren Einheiten, die dicht nebeneinander platziert sind, sowie (ii) Monomeren und Dimeren, die an einen Siliziumcluster adsorbiert sind. Mehrere quantenchemische Methoden basierend auf Dichtefunktionaltheorie und Wellenfunktionstheorie sind zur Berechnung der molekularen elektronischen Absorptionsspektren verwendet worden. Dadurch sind die Änderungen in der optischen Absorption sowohl bei der Dimerisierung, als auch beim kovalenten Anbinden an die Oberfläche bestimmt worden. Dazu ist die exzitonische Aufspaltung (Davydov splitting) zwischen den angeregten Zuständen aus ersten Prinzipien unter Verwendung von speziellen Orbitalen für Übergangszustände (natural transition orbitals) berechnet worden. Dadurch wird ein Einblick in die Natur der angeregten Zuständen erreicht. In der dritten Publikation ist eine nicht-adiabatische Molekulardynamik-Simulation unter Anwendung von trajectory surface hopping durchgeführt worden, um die Photoisomerisirung von Azobenzol-Dimeren zu modellieren. Dabei sind (i) ein isoliertes sowie (ii) ein Dimer in der Monolage betrachtet worden. Es sind die exzitonische Kopplung zwischen den zwei Molekülen, sowie, im Falle der Monolage, auch Van-der-Waals-Wechselwirkungen berücksicht worden. Die Ergebnisse weisen darauf hin, dass ein isoliertes Dimer gleichermaßen isomerisierungsfähig wie ein Monomer ist, wobei die cis → trans Photoisomerisierung durch die sterische Hinderung erheblich unterdrückt wird. Außerdem beinhaltet die darliegende Dissertationsschrift eine allgemeine Einführung, theoretische Grundlagen der verwendeten Methoden und die Diskussion der erhaltenen Ergebnisse mit Blick auf die vorhandene Literatur. Ferner sind zusätzliche Ergebnisse bezüglich der folgenden Aspekte dargestellt: (i) Aktivierungsparameter der thermischen cis → trans Isomerisierung von Azobenzol; (ii) ein Näherungsverfahren zur Berücksichtigung der Anharmonizität von Molekülschwingungen bei Berechnung der Aktivierungsentropie; (iii) Absorptionspektren von Photoschalter-Silizium-Kompositen berechnet mithilfe von zeitaufwändigen Wellenfunktions-basierten Methoden. KW - quantum chemistry KW - surface hopping dynamics KW - azobenzene KW - Quantenchemie KW - Surface Hopping Dynamik KW - Azobenzol Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-394610 ER - TY - THES A1 - Graglia, Micaela T1 - Lignin valorization T1 - Lignin Valorisierung BT - extraction, characterization and applications BT - Extraktion, Charakterisierung und Anwendungen N2 - The topic of this project is the use of lignin as alternative source of aromatic building blocks and oligomers to fossil feedstocks. Lignin is known as the most abundant aromatic polymer in nature and is isolated from the lignocellulosic component of plants by different possible extraction treatments. Both the biomass source and the extraction method affect the structure of the isolated lignin, therefore influencing its further application. Lignin was extracted from beech wood by two different hydrothermal alkaline treatments, which use NaOH and Ba(OH)2 as base and by an acid-catalyzed organosolv process. Moreover, lignin was isolated from bamboo, beech wood and coconut by soda treatment of the biomasses. A comparison of the structural features of such isolated lignins was performed through the use of a wide range of analytical methods. Alkaline lignins resulted in a better candidate as carbon precursor and macromonomers for the synthesis of polymer than organosolv lignin. In fact, alkaline lignins showed higher residual mass after carbonization and higher content of the reactive hydroxy functionalities. In contrast, the lignin source turned out to slightly affect the lignin hydroxyl content. One of the most common lignin modifications is its deconstruction to obtain aromatic molecules, which can be used as starting materials for the synthesis of fine chemicals. Lignin deconstruction leads to a complex mixture of aromatic molecules. A gas chromatographic analytical method was developed to characterize the mixture of products obtained by lignin deconstruction via heterogeneous catalytic hydrogenolysis. The analytical protocol allowed the quantification of three main groups of molecules by means of calibration curves, internal standard and a preliminary silylation step of the sample. The analytical method was used to study the influence of the hydrogenolysis catalyst, temperature and system (flow and batch reactor) on the yield and selectivity of the aromatic compounds. Lignin extracted from beech wood by a hydrothermal process using Ba(OH)2 as base, was functionalized by aromatic nitration in order to add nitrogen functionalities. The final goal was the synthesis of a nitrogen doped carbon. Nitrated lignin was reduced to the amino form in order to compare the influence of different nitrogen functionalities on the porosity of the final carbon. The carbons were obtained by ionothermal treatment of the precursors in the presence of the eutectic salt mixture KCl/ZnCl2 Such synthesized carbons showed micro-, macro- and mesoporosity and were tested for their electrocatalytic activity towards the oxygen reduction reaction. Mesoporous carbon derived from nitro lignin displayed the highest electrocatalytic activity. Lignins isolated from coconut, beech wood and bamboo were used as macromonomers for the synthesis of biobased polyesters. A condensation reaction was performed between lignin and a hyper branched poly(ester-amine), previously obtained by condensation of triethanolamine and adipic acid. The influence of the lignin source and content on the thermochemical and mechanical properties of the final material was investigated. The prepolymer showed adhesive properties towards aluminum and its shear strength was therefore measured. The gluing properties of such synthesized glues turned out to be independent from the lignin source but affected by the amount of lignin in the final material. This work shows that, although still at a laboratory scale, the valorization of lignin can overcome the critical issues of lignin´s structure variability and complexity. N2 - Das Thema dieser Arbeit ist Lignin als alternative Quelle für aromatische Moleküle einzusetzen, welche sonst aus fossilen Rohstoffen hergestellt werden. Lignin ist das am häufigsten vorkommende aromatische Polymer in der Natur. Es wird durch verschiedene Extraktionsmethoden aus pflanzlicher Lignocellulose isoliert. Sowohl der Rohstoff als auch das Extraktionsverfahren beeinflussen die Struktur des isolierten Lignins und bestimmen dadurch die weiteren Anwendungsmöglichkeiten. In der vorliegenden Arbeit die wurde Lignin durch zwei alkalisch hydrothermale Extraktionsmethoden aus Buchenholz extrahiert, wobei entweder NaOH oder Ba(OH)2 verwendet wurde. Eine dritte Methode bedient sich der sogenannten säuerekatalysierten Organosolv-Extraktion. Das Weiteren wurden drei Lignine durch eine Soda Extraktionsmethode aus Bambus, Buchenholz und Kokosnussschalen isoliert. Die Strukturen dieser wurden mit Hilfe verschiedener analytischer Techniken analysiert und verglichen. Während alkalische Lignine sich besser als Ausgangsstoff für poröse Kohlenstoffmaterialien und Makromonomere für die Synthese von Polymeren eignen, zeigen Lignine aus dem Organosolv Prozess weniger gute Eigenschaften hinsichtlich dieser Applikationen. Die bis heute häufigste Modifikation von Lignin beschäftigt sich mit der Aufschließung zu aromatischen Molekülen, welche die Grundlage für die weitere Herstellung von Chemikalien darstellen. Um die Aufschlussprodukte der Hydrogenolyse aus Lignin vergleichen zu können, wurde während dieser Arbeit wurde eine Gaschromatographiemethode entwickelt. In einem weiteren Schritt wurde isoliertes Lignin aus Buchenholzspänen durch Nitrierung mit zusätzlichem Stickstoff funktionalisiert. Das modifizierte Lignin konnte direkt al Präkursor für stickstoffdotierte kohlen dienen, welche mittels ionothermaler Synthese mit Hilfe von KCl/ZnCl2 als eutektischem Salz hergestellt wurden. Diese Materialien wurden erfolgreich in der Sauerstoffreduktion als Katalysator zum Einsatz gebracht. Die gewonnen Lignine aus Kokosnussschalen, Bambus und Buchenholz wurden als Makromonomere für die Herstellung von biobasiertem Polyester verwendet. Sowohl die thermochemischen als auch die mechanischen Eigenschaften wurden durch die unterschiedlichen Lignine der verschiedenen Pflanzen beeinflusst. Das hergestellte Polymer zeigte gute Eigenschaften als Biomass-basierter Kleber. Mit dieser Arbeit konnte gezeigt werden, dass Lignin, obwohl es eine sehr variable und komplexe Struktur aufweis, in verschiedenen Anwendungsbereichen zum Einsatz kommen kann, auch wenn diese bis heute nur im Labormaßstab verwirklicht wurden. KW - Lignin KW - biorefinery KW - biomass KW - Lignin KW - Biomasse KW - Bioraffinerie Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-104863 ER - TY - GEN A1 - Zehbe, Kerstin A1 - Kollosche, Matthias A1 - Lardong, Sebastian A1 - Kelling, Alexandra A1 - Schilde, Uwe A1 - Taubert, Andreas T1 - Ionogels based on poly(methyl methacrylate) and metal-containing ionic liquids BT - correlation between structure and mechanical and electrical properties N2 - Ionogels (IGs) based on poly(methyl methacrylate) (PMMA) and the metal-containing ionic liquids (ILs) bis-1-butyl-3-methlimidazolium tetrachloridocuprate(II), tetrachloride cobaltate(II), and tetrachlorido manganate(II) have been synthesized and their mechanical and electrical properties have been correlated with their microstructure. Unlike many previous examples, the current IGs show a decreasing stability in stress-strain experiments on increasing IL fractions. The conductivities of the current IGs are lower than those observed in similar examples in the literature. Both effects are caused by a two-phase structure with micrometer-sized IL-rich domains homogeneously dispersed an IL-deficient continuous PMMA phase. This study demonstrates that the IL-polymer miscibility and the morphology of the IGs are key parameters to control the (macroscopic) properties of IGs. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 361 KW - microstructure KW - ionogels KW - ionic liquids KW - phase separation KW - mechanical properties KW - ionic conductivity Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-400607 ER - TY - GEN A1 - Enzenberg, Anne A1 - Laschewsky, André A1 - Boeffel, Christine A1 - Wischerhoff, Erik T1 - Influence of the near molecular vicinity on the temperature regulated fluorescence response of poly(N-vinylcaprolactam) N2 - A series of new fluorescent dye bearing monomers, including glycomonomers, based on maleamide and maleic esteramide was synthesized. The dye monomers were incorporated by radical copolymerization into thermo-responsive poly(N-vinyl-caprolactam) that displays a lower critical solution temperature (LCST) in aqueous solution. The effects of the local molecular environment on the polymers' luminescence, in particular on the fluorescence intensity and the extent of solvatochromism, were investigated below as well as above the phase transition. By attaching substituents of varying size and polarity in the close vicinity of the fluorophore, and by varying the spacer groups connecting the dyes to the polymer backbone, we explored the underlying structure-property relationships, in order to establish rules for successful sensor designs, e.g., for molecular thermometers. Most importantly, spacer groups of sufficient length separating the fluorophore from the polymer backbone proved to be crucial for obtaining pronounced temperature regulated fluorescence responses. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 363 KW - thermo-responsive polymers KW - poly(N-vinylcaprolactam) KW - lower critical solution temperature KW - fluorescent dyemonomers KW - naphthalimide KW - solvatochromism KW - polymeric sensors KW - molecular thermometers Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-400634 ER - TY - THES A1 - Braun, Max T1 - Heterogeneous Catalysis for the Conversion of Fructose to Chemicals and Fuel in a Continuous Flow Process T1 - Umsetzung von Fruktose zu Chemikalien und Treibstoff mittels heterogener Katalysatoren in einem kontinuierlichen Prozess N2 - Die Umsetzung von Zucker (Kohlenhydrate) in einem kontinuierlichen Prozess eröffnet Möglichkeiten der Synthese diverser Chemikalien und Treibstoff aus erneuerbaren Ressourcen, welche heute überwiegend aus fossilen Quellen stammen. Passend zum Konzept der Bioraffinerie und der „grünen Chemie“, liegt der Fokus dieser Arbeit auf der Umsetzung von in Ethanol gelöster Fruktose in einem kontinuierlichen Verfahren, mit Hilfe eigens entwickelter heterogener Katalysatoren. Die Dehydratisierung von Fruktose wird mit einem heterogenen Säurekatalysator realisiert, während die Folgeprodukte mittels einer Hydrodesoxygenierung umgesetzt werden. Für den zweiten Schritt kommen Metallkatalysatoren auf Basis von Nickel und Wolframcarbid (WC) zum Einsatz, wodurch der Einsatz teurer Edelmetalle vermieden werden kann. Hauptprodukte des zweistufigen Verfahrens sind 2,5-Dimethylfuran (DMF) und Ethyllevulinat (EL). Beide Moleküle sind vielversprechende alternative Treibstoffe, bzw. können gebräuchlichen Treibstoffen beigemischt werden, um deren Einsatz zu reduzieren und schrittweise zu substituieren. Alternativ können die Zwischenprodukte der Dehydratisierung, sowie DMF und EL weiter zu Chemikalien umgesetzt werden, welche in der Polymersynthese, als Lösungsmittel oder als Grundchemikalien eingesetzt werden können. Die Entwicklung der jeweiligen Katalysatoren für Dehydratisierungs- und Hydrodesoxygenierungsreaktionen erfolgt auf Basis von karbonisierter Biomasse, sowie Wolframcarbid. Die jeweiligen Reaktivitäten werden durch Standardreaktionen getestet, wobei sich Wolframcarbid in Nanopartikelform, in Kombination mit Wasserstoff als sehr aktiv erwiesen hat. Der selbst entwickelte aktivierte Kohlenstoff, das kommerzielle Amberlyst 15, sowie Wolframcarbid mit zusätzlichen Nickel-Nanopartikeln werden für weiterführende Reaktionen in einem kontinuierlichen Prozess herangezogen und kombiniert. Um den Umsatz von Fruktose zu DMF in einer „zwei Reaktoren Anlage“ zu ermöglichen, wird eine Erweiterung eines kommerziellen Reaktorsystems um einen weiteren Reaktor vorgenommen. Die Verweilzeit in der Reaktoranlage beträgt somit ca. 14 Minuten, wobei 11 Minuten auf die erste Säule (Dehydratisierung) und 3 Minuten auf die zweite Säule (Hydrodesoxygenierung) entfallen. In diesem kontinuierlichen und zweistufigen System lassen sich Ausbeuten von 38.5 % DMF und 47 % EL erzielen. Ein kontinuierlicher Lauf von sieben Stunden zeigt die Stabilität der eingesetzten Katalysatoren, auch wenn eine geringe Deaktivierung des Dehydratisierungskatalysators beobachtet werden kann. Der Ni@WC Katalysator zeigte hingegen keine Abnahme der Nickel Konzentration und somit kommt es zu keiner Auswaschung des Metalls. Das gebildete EL wurde hingegen nicht umgesetzt und verbleibt unverändert in Lösung. Das zweistufige System wurde schließlich in einem Mischkatalysatorsystem kombiniert, wobei auf aktivierten und sulfonierten Kohlenstoff zurückgegriffen wurde. Dieser zeigte bereits eine Transferhydrodesoxygenierungsaktivität. Diese Beobachtung ist deshalb bemerkenswert, da erst seit kurzem bekannt ist, dass Graphenstrukturen an sich katalytisch aktiv sein können. Um diese Aktivität weiter zu steigern, wurde der aktivierte Kohlenstoff mit 10 wt% Ni@WC gemischt, sodass beide Katalysatoren in einer Säule vorliegen. Die ursprünglichen 2 % DMF Ausbeute mit reinem aktivierten Kohlenstoff können somit auf 12 % gesteigert werden, da das Folgeprodukt EL hierbei vermieden wird und das Zwischenprodukt „HMF Derivat“ direkt zu DMF weiter reagieren kann. Dieses Ergebnis zeigt das Potential der „ein Reaktor Umsetzung“, weshalb eine kontinuierliche Durchflussreaktoranlage im Litermaßstab als Scale-Up des vorhergehenden Labormaßstabs realisiert wurde. Der 800 mm x 28.5 mm Reaktor bedient eine maximale Flussrate von 50 mL min-1, Drücke von 100 bar und Temperaturen bis zu 500 °C. N2 - The valorization of carbohydrates is one of the most promising fields in green chemistry, as it enables to produce bulk chemicals and fuels out of renewable and abundant resources, instead of further exploiting fossil feedstocks. The focus in this thesis is the conversion of fructose, using dehydration and hydrodeoxygenation reactions. The main goal is to find an easy continuous process, including the solubility of the sugar in a green solvent, the conversion over a solid acid as well as over a metal@tungsten carbide catalyst. At the beginning of this thesis, solid acid catalysts are synthesized by using carbohydrate material like glucose and starch at high temperatures (up to 600 °C). Additionally a third carbon is synthesized, using an activation method based on Ca(OH)2. After carbonization and further sulfonation, using fuming sulfuric acid, the three resulting catalysts are characterized together with sulfonated carbon black and Amberlyst 15 as references. In order to test all solid acid catalysts in reaction, a 250 mm x 4.6 mm stainless steel column is used as a fixed-bed continuous reactor. The temperature (110 °C to 250 °C) and residence time (2 to 30 minutes) is varied, and a direct relationship between contact time and selectivity is determined. The reaction mechanism, as well as the product distribution is showing a dehydration step of fructose towards 5-hydroxymethylfurfural (HMF). These furan-ring molecules are considered as “sleeping giants”, due to the possibility of using them as fuel, but also for upgrading them to chemicals like terephthalic acid or p-xylene. Consecutive reactions are producing levulinic acid, as well as condensation products with ethanol and formic acid. The activated carbon is additionally showing a 2 % yield of 2,5-Dimethylfuran (DMF) production, pointing towards the extraordinary properties of this catalyst. Without a metal catalyst present, what is normally necessary for hydrogenation reactions, a transferhydrogenation (with formic acid) is observed. The active catalyst was therefore carbon itself, what activated the hydrogen on its surface. This phenomenon was just very rarely observed so far. Expensive noble metals are the material of choice, when it comes to hydrogenation reactions nowadays and cheaper alternatives are necessary. By postulating a similar electronic structure of tungsten carbide (WC) to platinum by Lewy and Boudart, research is focusing on the replacement of Pt. The production of nano-sized tungsten carbide particles (7.5 ± 2.5 nm, 70 m2 g-1) is enabled by the so called “urea glass route” and its catalytic performances are compared to commercial material. It is shown, that the activity is strongly dependent on the size of the particles as well as the surface area. Nano-sized tungsten carbide is showing activity for hydrogenation reactions under mild conditions (maximum 150 °C, 30 bar). This material therefore opens up new possibilities for replacing the rare and expensive platinum with tungsten carbide based catalysts. Additionally different metal nanoparticles of palladium, copper and nickel are deposited on top of WC to further promote its reactivity. The nickel nanoparticles are strongly connected to WC and showed the best activity as well as selectivity for upgrading HMF with hydrodeoxygenation. The Ni@WC is not leaching and is showing very good hydrodeoxygenation properties with DMF yields up to 90 percent. Copper@WC is not showing good activity and palladium@WC enables undesired consecutive reactions, hydrogenating the furan ring system. In order to enable the upgrade of fructose to DMF directly in a continuous system, the current H CUBE Pro TM hydrogenation system is customized with a second reaction column. A 250 mm x 4.6 mm stainless steel reactor column is connected ahead of the hydrogen insertion, enabling the dehydration of fructose to HMF derivatives, before pumping these products into the second column for hydrogenation. The overall residence time in the two column reactor system is 14 minutes. The overall results are an almost full conversion with a yield of 38.5 % DMF and 47 % yield of EL. The main disadvantage is the formation of higher mass products, so called humins, which start depositing on top of the catalysts, blocking their active sites. In general it can be stated, that a two column system goes along with a higher investment as well as more maintenance costs, compared to a one column catalytic approach. To develop a catalyst, which is on the one hand able to dehydrate as well as hydrodeoxygenate the reactants, is aimed for at the last part of the thesis. The activated carbon however shows already activity for hydrodeoxygenation without any metal present and offers itself therefore as an alternative to overcome the temperature instability of Amberlyst 15 (max. 120 °C) for a combined DMF production directly from fructose. The activity for the upgrade to DMF is increased from 2 % to 12 % DMF yield in one mixed continuous column. In order to scale up the entire one column approach, an 800 mm x 28.5 mm inner diameter column was planned and manufactured. The system is scaled up and assembled, whereas this flow reactor system is able to be run with 50 mL min-1 maximum flow rate, to stand a pressure of maximum 100 bar and be heated to around 500 °C. The tubing and connections, as well as the used devices are planned according to be safe and easy in use. The scaled-up approach offers a reaction column 120 times bigger (510 ml) then the first extension of the commercial system. This further extension offers the possibility of ranging between 1 and 1000 mL min-1, making it possible to use the approach in pilot plant applications. KW - Biorefinery KW - Catalysis KW - Hydroxymethylfurfural KW - Upgrade of Fructose KW - Bioraffinerie KW - Katalyse KW - Hydroxymethylfurfural KW - Aufarbeitung von Fruktose Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-410370 ER - TY - THES A1 - Heck, Christian T1 - Gold and silver nanolenses self-assembled by DNA origami T1 - Gold- und Silbernanolinsen, selbstassembliert durch DNA-Origami N2 - Nanolenses are linear chains of differently-sized metal nanoparticles, which can theoretically provide extremely high field enhancements. The complex structure renders their synthesis challenging and has hampered closer analyses so far. Here, the technique of DNA origami was used to self-assemble DNA-coated 10 nm, 20 nm, and 60 nm gold or silver nanoparticles into gold or silver nanolenses. Three different geometrical arrangements of gold nanolenses were assembled, and for each of the three, sets of single gold nanolenses were investigated in detail by atomic force microscopy, scanning electron microscopy, dark-field scattering and Raman spectroscopy. The surface-enhanced Raman scattering (SERS) capabilities of the single nanolenses were assessed by labelling the 10 nm gold nanoparticle selectively with dye molecules. The experimental data was complemented by finite-difference time-domain simulations. For those gold nanolenses which showed the strongest field enhancement, SERS signals from the two different internal gaps were compared by selectively placing probe dyes on the 20 nm or 60 nm gold particles. The highest enhancement was found for the gap between the 20 nm and 10 nm nanoparticle, which is indicative of a cascaded field enhancement. The protein streptavidin was labelled with alkyne groups and served as a biological model analyte, bound between the 20 nm and 10 nm particle of silver nanolenses. Thereby, a SERS signal from a single streptavidin could be detected. Background peaks observed in SERS measurements on single silver nanolenses could be attributed to amorphous carbon. It was shown that the amorphous carbon is generated in situ. N2 - Nanolinsen sind Strukturen aus linear angeordneten, unterschiedlich großen metallischen Nanopartikeln. Elektromagnetische Felder können durch sie theoretisch extrem verstärkt werden, aufgrund ihres komplexen Aufbaus sind sie bislang aber wenig erforscht. Im Rahmen dieser Dissertation wurden Nanolinsen mit Hilfe der DNA-Origami-Technik aus DNA-beschichteten 10 nm-, 20 nm- und 60 nm-Gold- oder Silbernanopartikeln hergestellt. Für Goldnanolinsen sind die Partikel dabei in drei unterschiedlichen Geometrien angeordnet worden. Einzelne Goldnanolinsen wurden mittels Rasterkraftmikroskopie, Rasterelektronenmikroskopie, Dunkelfeld- und Ramanspektroskopie untersucht. Um die Raman-Verstärkung quantifizieren zu können, trugen dabei jeweils die 10 nm-Goldpartikel Farbstoffmoleküle in ihrer Beschichtung. Die Interpretation der Messdaten wurde durch numerische Simulationen unterstützt. Nanolinsen zeichnen sich durch eine stufenweise Feldverstärkung aus. Dieser Effekt konnte experimentell bestätigt werden, indem selektiv die 20 nm- oder 60 nm-Partikel von Goldnanolinsen mit Farbstoffen markiert und die resultierenden Raman-Signale verglichen wurden. Ein mit Alkingruppen markiertes Protein ist ortsselektiv in Silbernanolinsen integriert worden. Es war möglich, das für das Alkin charakteristische oberflächenverstärkte Raman-Signal im Spektrum einer einzelnen Nanolinse und damit eines einzelnen Proteins zu beobachten. Bei den Messungen mit Silbernanolinsen sind für amorphe Kohlenstoffspezies charakterstische Hintergrundsignale beobachtet worden. Durch zeitabhängige Messungen konnte gezeigt werden, dass diese Spezies erst in situ gebildet werden. KW - DNA origami KW - gold nanoparticles KW - silver nanoparticles KW - SERS KW - self-assembly KW - plasmonics KW - nanolenses KW - DNA-Origami KW - Goldnanopartikel KW - Silbernanopartikel KW - SERS KW - Selbstassemblierung KW - Plasmonik KW - Nanolinsen Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-409002 ER - TY - THES A1 - Olejko, Lydia T1 - Förster resonance energy transfer (FRET)-based nanophotonics using DNA origami structures T1 - Förster-Resonanzenergietransfer (FRET) basierende Nanophotonik auf DNA Origami Strukturen N2 - The field of nanophotonics focuses on the interaction between electromagnetic radiation and matter on the nanometer scale. The elements of nanoscale photonic devices can transfer excitation energy non-radiatively from an excited donor molecule to an acceptor molecule by Förster resonance energy transfer (FRET). The efficiency of this energy transfer is highly dependent on the donor-acceptor distance. Hence, in these nanoscale photonic devices it is of high importance to have a good control over the spatial assembly of used fluorophores. Based on molecular self-assembly processes, various nanostructures can be produced. Here, DNA nanotechnology and especially the DNA origami technique are auspicious self-assembling methods. By using DNA origami nanostructures different fluorophores can be introduced with a high local control to create a variety of nanoscale photonic objects. The applications of such nanostructures range from photonic wires and logic gates for molecular computing to artificial light harvesting systems for artificial photosynthesis. In the present cumulative doctoral thesis, different FRET systems on DNA origami structures have been designed and thoroughly analyzed. Firstly, the formation of guanine (G) quadruplex structures from G rich DNA sequences has been studied based on a two-color FRET system (Fluorescein (FAM)/Cyanine3 (Cy3)). Here, the influences of different cations (Na+ and K+), of the DNA origami structure and of the DNA sequence on the G-quadruplex formation have been analyzed. In this study, an ion-selective K+ sensing scheme based on the G-quadruplex formation on DNA origami structures has been developed. Subsequently, the reversibility of the G-quadruplex formation on DNA origami structures has been evaluated. This has been done for the simple two-color FRET system which has then been advanced to a switchable photonic wire by introducing additional fluorophores (FAM/Cy3/Cyanine5 (Cy5)/IRDye®700). In the last part, the emission intensity of the acceptor molecule (Cy5) in a three-color FRET cascade has been tuned by arranging multiple donor (FAM) and transmitter (Cy3) molecules around the central acceptor molecule. In such artificial light harvesting systems, the excitation energy is absorbed by several donor and transmitter molecules followed by an energy transfer to the acceptor leading to a brighter Cy5 emission. Furthermore, the range of possible excitation wavelengths is extended by using several different fluorophores (FAM/Cy3/Cy5). In this part of the thesis, the light harvesting efficiency (antenna effect) and the FRET efficiency of different donor/transmitter/acceptor assemblies have been analyzed and the artificial light harvesting complex has been optimized in this respect. N2 - Nanotechnologie hat in den letzten Jahrzehnten durch die Herstellung von Materialien mit außergewöhnlichen Eigenschaften für Anwendungen im Bereich der Medizin und Materialwissenschaften immer mehr an Popularität gewonnen. Die Herstellungsmethoden von Nanostrukturen sind weit gefächert. Auch Desoxyribonukleinsäure (DNS bzw. engl. DNA, deoxyribonucleic acid) kann für die Herstellung von Strukturen im Nanometerbereich genutzt werden. Diese sogenannte DNA-Nanotechnologie wurde in den frühen 1980er Jahren von Nadrian C. Seeman begründet. Ungefähr 30 Jahre später wurde eine neue Methodik für die Herstellung von DNA-Nanostrukturen von Paul W. K. Rothemund entwickelt, die er „scaffold DNA origami“ (Gerüst-DNA-Origami) nannte. DNA-Origami-Nanostrukturen können relativ einfach hergestellt werden und eignen sich perfekt für die Anordnung unterschiedlicher Moleküle (zum Beispiel Fluorophore) mit hoher räumlicher Kontrolle und Präzision. Daher können sie als Substrate genutzt werden, um verschiedene Förster-Resonanzenergietransfer (FRET) Systeme zu entwerfen und zu untersuchen. FRET ist ein strahlungsloser Energietransfer, bei dem die Anregungsenergie von einem Donor- auf ein Akzeptor-Molekül übertragen wird. In dieser kumulativen Doktorarbeit wurden verschiedene FRET-Systeme auf DNA-Origami-Nanostrukturen entwickelt und mithilfe der Fluoreszenzspektroskopie untersucht. Hierbei wurde zuerst die durch einwertige Kationen (Kalium oder Natrium) induzierte Guanin-Quadruplex-Faltung von freier Telomer-DNA und Telomer-DNA auf DNA-Origami-Strukturen mittels FRET analysiert. Diese Untersuchungen haben gezeigt, dass die freie umgedrehte menschliche Telomer-Sequenz (RevHumTel, 5'-(GGG ATT)4) generell sensitiver auf K+ als auf Na+ reagiert. Durch die Immobilisierung der Telomer-DNA auf DNA-Origami-Strukturen kann eine vollständige Selektivität für K+ erreicht werden. Interessanterweise wird die Ionenselektivität aufgehoben, wenn die menschliche Telomer-Sequenz (HumTel, 5'-(TTA GGG)4) verwendet wird. Basierend auf der G-Quadruplex-Faltung konnten schaltbare FRET-Systeme entwickelt werden, da sich die G-Quadruplexe wieder entfalten, wenn die Kationen mithilfe von zum Beispiel Kryptanden entfernt werden. In den hier untersuchten FRET-Systemen konnte zwischen hoher FRET-Effizienz (gefalteter G-Quadruplex) und niedriger FRET-Effizienz (entfalteter DNA Einzelstrang) durch Zugabe KCl bzw. cryptand gewechselt werden. Da sich DNA-Origami-Strukturen recht einfach modifizieren lassen, wurde das ursprüngliche zwei-Farben-FRET-System durch Hinzufügen eines weiteren etwas rotverschobenen Farbstoffes erweitert (drei-Farben-FRET-Kaskade). Schließlich konnte ein schaltbarer photonischer Draht durch Einfügen eines vierten Farbstoffes entwickelt werden. Die Emissionsintensität des finalen Akzeptors ist in einer einfachen drei-Farben-FRET-Kaskade (ein Donor, ein Transmitter und ein Akzeptor) verhältnismäßig gering und kann durch das Anordnen von mehreren Donor- und Transmitter-Molekülen um ein zentrales Akzeptor-Molekül herum stark erhöht werden. In diesen sogenannten künstlichen Lichtsammelkomplexen absorbieren die Donor-Moleküle das Anregungslicht und übertragen dieses über mehrere FRET-Stufen zum Akzeptor-Molekül. Dadurch wird der Wellenlängenbereich der elektromagnetischen Strahlung, welcher vom Akzeptor absorbiert werden kann, vergrößert und die Emissionsintensität des Akzeptors verstärkt. In diesem Teil der Arbeit wurde die Anzahl der Farbstoffe und die Anordnung dieser unterschiedlichen Farbstoffe variiert und die Lichtsammeleffizienz und FRET-Effizienz bestimmt. Hierbei wurden diese Parameter optimiert und aufgrund der gefundenen Ergebnisse konnten Design-Regeln für solche künstlichen Lichtsammelkomplexe aufgestellt werden. KW - DNA origami KW - FRET KW - Förster resonance energy transfer KW - DNA Origami KW - FRET KW - Förster-Resonanzenergietransfer Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-396747 ER - TY - THES A1 - Mbaya Mani, Christian T1 - Functional nanoporous carbon-based materials derived from oxocarbon-metal coordination complexes T1 - Funktionale nanoporöse Kohlenstoffmaterialien auf Basis von Oxokohlenstoff-Metal Koordinationskomplexe N2 - Nanoporous carbon based materials are of particular interest for both science and industry due to their exceptional properties such as a large surface area, high pore volume, high electroconductivity as well as high chemical and thermal stability. Benefiting from these advantageous properties, nanoporous carbons proved to be useful in various energy and environment related applications including energy storage and conversion, catalysis, gas sorption and separation technologies. The synthesis of nanoporous carbons classically involves thermal carbonization of the carbon precursors (e.g. phenolic resins, polyacrylonitrile, poly(vinyl alcohol) etc.) followed by an activation step and/or it makes use of classical hard or soft templates to obtain well-defined porous structures. However, these synthesis strategies are complicated and costly; and make use of hazardous chemicals, hindering their application for large-scale production. Furthermore, control over the carbon materials properties is challenging owing to the relatively unpredictable processes at the high carbonization temperatures. In the present thesis, nanoporous carbon based materials are prepared by the direct heat treatment of crystalline precursor materials with pre-defined properties. This synthesis strategy does not require any additional carbon sources or classical hard- or soft templates. The highly stable and porous crystalline precursors are based on coordination compounds of the squarate and croconate ions with various divalent metal ions including Zn2+, Cu2+, Ni2+, and Co2+, respectively. Here, the structural properties of the crystals can be controlled by the choice of appropriate synthesis conditions such as the crystal aging temperature, the ligand/metal molar ratio, the metal ion, and the organic ligand system. In this context, the coordination of the squarate ions to Zn2+ yields porous 3D cube crystalline particles. The morphology of the cubes can be tuned from densely packed cubes with a smooth surface to cubes with intriguing micrometer-sized openings and voids which evolve on the centers of the low index faces as the crystal aging temperature is raised. By varying the molar ratio, the particle shape can be changed from truncated cubes to perfect cubes with right-angled edges. These crystalline precursors can be easily transformed into the respective carbon based materials by heat treatment at elevated temperatures in a nitrogen atmosphere followed by a facile washing step. The resulting carbons are obtained in good yields and possess a hierarchical pore structure with well-organized and interconnected micro-, meso- and macropores. Moreover, high surface areas and large pore volumes of up to 1957 m2 g-1 and 2.31 cm3 g-1 are achieved, respectively, whereby the macroscopic structure of the precursors is preserved throughout the whole synthesis procedure. Owing to these advantageous properties, the resulting carbon based materials represent promising supercapacitor electrode materials for energy storage applications. This is exemplarily demonstrated by employing the 3D hierarchical porous carbon cubes derived from squarate-zinc coordination compounds as electrode material showing a specific capacitance of 133 F g-1 in H2SO4 at a scan rate of 5 mV s-1 and retaining 67% of this specific capacitance when the scan rate is increased to 200 mV s-1. In a further application, the porous carbon cubes derived from squarate-zinc coordination compounds are used as high surface area support material and decorated with nickel nanoparticles via an incipient wetness impregnation. The resulting composite material combines a high surface area, a hierarchical pore structure with high functionality and well-accessible pores. Moreover, owing to their regular micro-cube shape, they allow for a good packing of a fixed-bed flow reactor along with high column efficiency and a minimized pressure drop throughout the packed reactor. Therefore, the composite is employed as heterogeneous catalyst in the selective hydrogenation of 5-hydroxymethylfurfural to 2,5-dimethylfuran showing good catalytic performance and overcoming the conventional problem of column blocking. Thinking about the rational design of 3D carbon geometries, the functions and properties of the resulting carbon-based materials can be further expanded by the rational introduction of heteroatoms (e.g. N, B, S, P, etc.) into the carbon structures in order to alter properties such as wettability, surface polarity as well as the electrochemical landscape. In this context, the use of crystalline materials based on oxocarbon-metal ion complexes can open a platform of highly functional materials for all processes that involve surface processes. N2 - Nanoporöse Kohlenstoffmaterialien zeichnen sich u. a. durch ihre außergewöhnlichen Eigenschaften aus wie z. B. hohe Oberfläche, hohes Porenvolumen, hohe elektrische Leitfähigkeit und auch hohe chemische und thermische Stabilität. Aufgrund dessen finden sie Anwendung in den unterschiedlichsten Bereichen von der Speicherung elektrischer Energie bis hin zur Katalyse und Gasspeicherung. Die klassische Synthese von porösen Kohlenstoffmaterialien basiert u. a. auf der Nutzung von sogenannten anorganischen bzw. organischen Templaten und/oder chemischen Aktivierungsagenzien. Allerdings gelten diese Methoden eher als kompliziert, kostspielig und umweltschädlich. Außerdem wird eine gezielte Kontrolle der Produkteigenschaften durch die zahlreichen Prozesse erschwert, die sich bei den hohen Karbonisierungstemperaturen abspielen und folglich die Materialeigenschaften unvorhersehbar verändern können. In der vorliegenden Arbeit wird ein alternatives Konzept für die Synthese von nanoporösen Kohlenstoffmaterialien mit gezielt einstellbaren Eigenschaften vorgestellt. Diese basiert auf der Nutzung von kristallinen Vorläufermaterialien, die aus der Koordination von den Anionen der Quadratsäure bzw. der Krokonsäure mit verschiedenen Metallionen (Zn2+, Cu2+, Ni2+ und Co2+) resultieren. Diese haben den Vorteil, dass Eigenschaften wie z. B. die Partikelmorphologie und Porosität gezielt durch die Wahl geeigneter Syntheseparameter (z. B. Temperatur, molares Verhältnis, Metallion und Ligand) eingestellt werden können. Beispielsweise führen Koordinationskomplexe von der Quadratsäure mit Zn2+ in Wasser zu porösen 3D würfelförmigen Mikrokristallen, die durch einfache thermische Behandlung unter Schutzgasatmosphäre zu den entsprechenden Kompositen umgewandelt werden. Ein anschließender Waschschritt führt zu den entsprechenden Kohlenstoffmaterialien unter Erhalt der makroskopischen Struktur der kristallinen Vorläufermaterialien. In diesem Zusammenhang weisen die resultierenden Kohlenstoffe ebenfalls eine 3D Würfelform mit einer hierarchischen Porenstruktur bestehend aus vernetzten Mikro-, Meso- und Makroporen auf. Ferner besitzen die Kohlenstoffe hohe Oberflächen und Porenvolumen von bis zu 1.957 m2 g-1 bzw. 2,31 cm3 g-1. Um die Vorteile dieser Eigenschaften zu demonstrieren, werden sie als Elektrodenmaterial für Superkondensatoren getestet und zeigen dabei vielversprechende Kapazitäten. Außerdem, werden sie auch als Trägermaterial für die Immobilisierung von Nickel-Nanopartikel verwendet und als heterogene Katalysatoren in der selektiven Hydrierung von 5-hydroxymethylfurfural zu 2,5-dimethylfuran in einem Festbettreaktor eingesetzt. Dabei wird eine gute Katalysatorleistung (Produktivität) bei minimalem Druckabfall in der Reaktorsäule erreicht. KW - squaric acid KW - Quadratsäure KW - mesocrystals KW - Mesokristalle KW - nanoporöser Kohlenstoffpartikel KW - nanoporous carbon particles KW - Nanopartikel KW - nanoparticles KW - Koordinationskomplexe KW - coordination complexes KW - oxocarbon KW - Oxo-Kohlenstoff Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-407866 ER - TY - THES A1 - Dippel, Sandor T1 - Development of functional hydrogels for sensor applications T1 - Entwicklung funktionalisierter Hydrogele für Sensor Anwendungen N2 - In this work, a sensor system based on thermoresponsive materials is developed by utilizing a modular approach. By synthesizing three different key monomers containing either a carboxyl, alkene or alkyne end group connected with a spacer to the methacrylic polymerizable unit, a flexible copolymerization strategy has been set up with oligo ethylene glycol methacrylates. This allows to tune the lower critical solution temperature (LCST) of the polymers in aqueous media. The molar masses are variable thanks to the excurse taken in polymerization in ionic liquids thus stretching molar masses from 25 to over 1000 kDa. The systems that were shown shown to be effective in aqueous solution could be immobilized on surfaces by copolymerizing photo crosslinkable units. The immobilized systems were formulated to give different layer thicknesses, swelling ratios and mesh sizes depending on the demand of the coupling reaction. The coupling of detector units or model molecules is approached via reactions of the click chemistry pool, and the reactions are evaluated on their efficiency under those aspects, too. These coupling reactions are followed by surface plasmon resonance spectroscopy (SPR) to judge efficiency. With these tools at hand, Salmonella saccharides could be selectively detected by SPR. Influenza viruses were detected in solution by turbidimetry in solution as well as by a copolymerized solvatochromic dye to track binding via the changes of the polymers’ fluorescence by said binding event. This effect could also be achieved by utilizing the thermoresponsive behavior. Another demonstrator consists of the detection system bound to a quartz surface, thus allowing the virus detection on a solid carrier. The experiments show the great potential of combining the concepts of thermoresponsive materials and click chemistry to develop technically simple sensors for large biomolecules and viruses. N2 - Diese Arbeit befasst sich mit der Entwicklung von Sensorsystemen für biologische Analyten wie Bakterien und Viren. Die Sensoren beruhen auf thermoresponsiven Polymeren und die Entwicklung wird Schritt für Schritt ausgehend von der Monomersynthese dargelegt. Die Grundidee ist es alle Einzelschritte so modular wie möglich zu halten. Die Kopplungseinheiten für die späteren Erkennungsgruppen bestehen aus Carboxyl, Alken und Alkinfunktionalitäten, die zuerst mit einem Ethylenglycolspacer mit variabler Länge verknüpft werden und dann mit der polymerisierbaren Methylmethacrylatgruppe versehen werden. Diese koppelbaren Monomere werden mit Di- oder (Oligoethylenglycol)methacrylaten copolymerisiert. Je nach Verhältnis ist so auch die untere kritische Entmischungstemperatur (LCST) einstellbar. Mit der Erweiterung der Polymerisationstechnik um ionische Flüssigkeiten als Lösemittel lassen sich Molmassen von 25 bis über 1000 kDa einstellen. Um die Polymere funktionell zu erweitern, lassen sich auch benzophenonhaltige Monomere zur Vernetzung oder Immobilisierung copolymerisieren. Naphthalsäureimidhaltige Monomere wiederum dienen als Signaleinheit, da sie durch Verändern der Polarität ihrer Umgebung solvatochrom reagieren. Durch Aufschleudern und UV-Vernetzen lassen sich Gelschichten mit guter Schichtdickenkontrolle herstellen. Dabei sind die Substrate nur auf den jeweiligen Zweck beschränkt. Dank des Baukastenprinzips kann auch die Maschenweite oder der Quellgrad der Gele eingestellt werden. Die Polymere oder Hydrogele werden mit Hilfe von effizienten Reaktionen swe sogenannten „Click Chemie“ umgesetzt und die Reaktionen werden durchleuchtet, ob sie diesen Ansprüchen gerecht werden. Je nach Möglichkeit wird das Anknüpfen mittels Oberflächenplasmonenresonanzspektroskopie(SPR) verfolgt, so wie zum Beispiel die Kopplung eines Phagen-Oberflächenproteins und das selektive Binden eines Membransaccharids des Salmonellen Bakteriums. Influenza Viren werden selektiv mit Hilfe eines Erkennungspeptids gebunden und mit Hilfe von Trübungsspektroskopie bzw. dem thermoresponsiven Verhalten des Trägerpolymers nachgewiesen. Ein weiterer dargelegter Ansatz ist das Nachweisen von geringen Virenkonzentrationen mit Hilfe eines Hydrogels oder von Polymeren in Lösung, die jeweils mit einem solvatochromen Farbstoff ausgestattet sind, der auf die Umgebungsänderung durch den Virus reagiert. Die Experimente zeigen das große Potential von geschickt kombinierten thermoresponsiven Materialien, die mittels Funktionalisierung durch Click-Chemie zu technisch einfachen Nachweissystemen für Biomoleküle und sogar ganze Zellen entwickelt werden können. KW - biosensors KW - polymer synthesis KW - lower critical solution temperature KW - surface modification KW - smart materials KW - Biosensoren KW - Polymersynthese KW - untere kritische Entmischungstemperatur KW - schaltbare Materialien Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-398252 ER - TY - THES A1 - Meiling, Till Thomas T1 - Development of a reliable and environmentally friendly synthesis for fluorescence carbon nanodots T1 - Entwicklung einer zuverlässigen und umweltfreundlichen Synthese für fluoreszierende Kohlenstoff-Nanopunkte BT - preparation and characterisation of excellent and well-defined carbon nanodots by a fast, simple and cost-efficient synthesis method; with special focus on future exploration and large scale applications BT - Herstellung und Charakterisierung von hochwertigen und klar definierten Kohlenstoff-Nanopunkten mit Hilfe einer schnellen, einfachen, und kosteneffizienten Synthesemethode; mit speziellem Fokus auf ihre zukünftige Erforschung und breite Anwendung N2 - Carbon nanodots (CNDs) have generated considerable attention due to their promising properties, e.g. high water solubility, chemical inertness, resistance to photobleaching, high biocompatibility and ease of functionalization. These properties render them ideal for a wide range of functions, e.g. electrochemical applications, waste water treatment, (photo)catalysis, bio-imaging and bio-technology, as well as chemical sensing, and optoelectronic devices like LEDs. In particular, the ability to prepare CNDs from a wide range of accessible organic materials makes them a potential alternative for conventional organic dyes and semiconductor quantum dots (QDs) in various applications. However, current synthesis methods are typically expensive and depend on complex and time-consuming processes or severe synthesis conditions and toxic chemicals. One way to reduce overall preparation costs is the use of biological waste as starting material. Hence, natural carbon sources such as pomelo peal, egg white and egg yolk, orange juice, and even eggshells, to name a few; have been used for the preparation of CNDs. While the use of waste is desirable, especially to avoid competition with essential food production, most starting-materials lack the essential purity and structural homogeneity to obtain homogeneous carbon dots. Furthermore, most synthesis approaches reported to date require extensive purification steps and have resulted in carbon dots with heterogeneous photoluminescent properties and indefinite composition. For this reason, among others, the relationship between CND structure (e.g. size, edge shape, functional groups and overall composition) and photophysical properties is yet not fully understood. This is particularly true for carbon dots displaying selective luminescence (one of their most intriguing properties), i.e. their PL emission wavelength can be tuned by varying the excitation wavelength. In this work, a new reliable, economic, and environmentally-friendly one-step synthesis is established to obtain CNDs with well-defined and reproducible photoluminescence (PL) properties via the microwave-assisted hydrothermal treatment of starch, carboxylic acids and Tris-EDTA (TE) buffer as carbon- and nitrogen source, respectively. The presented microwave-assisted hydrothermal precursor carbonization (MW-hPC) is characterized by its cost-efficiency, simplicity, short reaction times, low environmental footprint, and high yields of approx. 80% (w/w). Furthermore, only a single synthesis step is necessary to obtain homogeneous water-soluble CNDs with no need for further purification. Depending on starting materials and reaction conditions different types of CNDs have been prepared. The as-prepared CNDs exhibit reproducible, highly homogeneous and favourable PL properties with narrow emission bands (approx. 70nm FWHM), are non-blinking, and are ready to use without need for further purification, modification or surface passivation agents. Furthermore, the CNDs are comparatively small (approx. 2.0nm to 2.4nm) with narrow size distributions; are stable over a long period of time (at least one year), either in solution or as a dried solid; and maintain their PL properties when re-dispersed in solution. Depending on CND type, the PL quantum yield (PLQY) can be adjusted from as low as 1% to as high as 90%; one of the highest reported PLQY values (for CNDs) so far. An essential part of this work was the utilization of a microwave synthesis reactor, allowing various batch sizes and precise control over reaction temperature and -time, pressure, and heating- and cooling rate, while also being safe to operate at elevated reaction conditions (e.g. 230 ±C and 30 bar). The hereby-achieved high sample throughput allowed, for the first time, the thorough investigation of a wide range of synthesis parameters, providing valuable insight into the CND formation. The influence of carbon- and nitrogen source, precursor concentration and -combination, reaction time and -temperature, batch size, and post-synthesis purification steps were carefully investigated regarding their influence on the optical properties of as-synthesized CNDs. In addition, the change in photophysical properties resulting from the conversion of CND solution into solid and back into the solution was investigated. Remarkably, upon freeze-drying the initial brown CND-solution turns into a non-fluorescent white/slightly yellow to brown solid which recovers PL in aqueous solution. Selected CND samples were also subject to EDX, FTIR, NMR, PL lifetime (TCSPC), particle size (TEM), TGA and XRD analysis. Besides structural characterization, the pH- and excitation dependent PL characteristics (i.e. selective luminescence) were examined; giving inside into the origin of photophysical properties and excitation dependent behaviour of CNDs. The obtained results support the notion that for CNDs the nature of the surface states determines the PL properties and that excitation dependent behaviour is caused by the “Giant Red-Edge Excitation Shift” (GREES). N2 - Kohlenstoff-Nanopunkte (CNDs, engl. carbon nanodots) haben im letzten Jahrzehnt insbesondere durch ihre vielversprechenden Eigenschaften immer mehr an Popularität gewonnen. CNDs zeichnen sich insbesondere durch ihre Wasserlöslichkeit, hohe chemische Stabilität, Biokompatibilität, hohe Resistenz gegen Photobleichen, und die Möglichkeit zur Oberflächenfunktionalisierung aus. Diese Eigenschaften machen sie somit ideal für eine breite Palette von Anwendungen: z.B. Abwasserbehandlung, (Foto-) Katalyse, Bioimaging und Biotechnologie, chemische Sensorik, sowie elektrochemische- und optoelektronische Anwendungen (z.B. LEDs). Insbesondere die Möglichkeit, CNDs aus einer Vielzahl organischer Materialien herzustellen, machen sie zu einer möglichen Alternative für herkömmliche organische Farbstoffe und Halbleiter-Quantenpunkte (QDs). Derzeitigen Synthesestrategien erweisen sich jedoch häufig als teuer, komplex und zeitaufwändig; bzw. benötigen toxischen Chemikalien und/oder drastische Reaktionsbedingungen. Eine Möglichkeit, die Herstellungskosten von CNDs zu reduzieren, ist die Verwendung von biologischem Abfall als Ausgangsmaterial. So wurden bereits eine Vielzahl an natürlichen Kohlenstoffquellen, z.B. Pomelo-Schale, Eiweiß und Eigelb, Orangensaft und sogar Eierschalen, für die Darstellung von CNDs verwendet. Während die Verwendung von biologischem Abfall wünschenswert ist, insbesondere um Wettbewerb mit der Nahrungsmittelproduktion zu vermeiden, fehlt den meisten Ausgangsmaterialien jedoch die notwendige Reinheit und strukturelle Homogenität um einheitliche CNDs zu erhalten. So führen bisherige Syntheseansätze oft zu CNDs mit heterogenen photophysikalischen Eigenschaften und unbestimmter Zusammensetzung. Für die Untersuchung des Zusammenhangs zwischen CND Struktur und photophysikalischen Eigenschaften werden aber möglichst homogene und vergleichbare Proben benötigt. In dieser Arbeit wird daher eine neue, zuverlässige, ökonomische und umweltfreundliche Einstufen-Synthese zur Darstellung von CNDs mit klar definierten und reproduzierbaren Photolumineszenz- (PL) -Eigenschaften vorgestellt. Die vorgestellte Methode basiert auf der mikrowellenunterstützten, hydrothermischen Behandlung (MW-hPC, engl. microwaveassisted hydrothermal precursor carbonization) wässriger Lösungen aus Stärke, Carbonsäuren (als Kohlenstoffquelle) und Tris-EDTA (TE) -Puffer (als Stickstoffquelle). Die MW-hPC zeichnet sich insbesondere durch die hohe Reproduzierbarkeit, einfache Handhabung, geringen Reaktionszeiten, geringe Umweltbelastung, Kosteneffizienz und die hohen Ausbeuten von ca. 80% (w/w) aus. Darüber hinaus wird nur ein einziger Syntheseschritt (ohne weitere Aufreinigung) benötigt um homogene, wasserlösliche CNDs zu erhalten. In Abhängig der gewählten Ausgangsmaterialen und Reaktionsbedingungen können verschiedene Typen an CNDs gewonnen werden. Die so gewonnen CNDs sind verhältnismäßig klein (ca. 2.0nm- 2.4nm); besitzen eine geringe Größenverteilung, hochgradig homogenen PL-Eigenschaften, und geringen Halbwertsbreiten (FWHM) von ca. 70nm. Darüber hinaus erwiesen sie sich als nicht blinkend; sind langzeitstabil (min. ein Jahr) sowohl in Lösung als auch als Feststoff; und sind direkt gebrauchsfertig, d.h. benötigen keine weitere Aufreinigung oder Oberflächenpassivierung. In Abhängigkeit vom CND-Typ kann die PL-Quantenausbeute zwischen 1% bis 90% betragen; einer der höchsten Werte der je (für CNDs) erreicht wurde. Ein wesentlicher Bestandteil dieser Arbeit war die Verwendung eines Mikrowellensynthese- Reaktors (MiWR) und die damit einhergehende präzise Kontrolle über die Reaktionstemperatur und -zeit, den Druck, und die Heiz- und Abkühlgeschwindigkeit. Des Weiteren ermöglichte der MiWR unterschiedliche Ansatzgrößen und das sichere Arbeiten bei erhöhten Reaktionsbedingungen (z.B. 230 ±C und 30 bar). Der hierdurch erreichte hohe Probendurchsatz ermöglichte somit erstmals die sorgfältige Untersuchung einer Vielzahl an Syntheseparametern hinsichtlich ihres Einflusses auf die photophysikalischen Eigenschaften der dargestellten CNDs. Die untersuchten Parameter reichen hierbei von der Reaktionstemperatur und -zeit über die Edukt-Konzentration und -Kombination (Kohlenstoff- und Stickstoffquelle) bis hin zur Ansatzgröße. Bemerkenswerterweise, und unabhängig vom CND-Typ, transformieren die ursprünglich braunen CND-Lösungen während der Trocknung zu einem nicht fluoreszierenden, weißen/leicht gelblich bis bräunlichen Feststoff; und regenerieren ihre photophysikalischen Eigenschaften verlustfrei in wässriger Lösung. Im Rahmen dieser Arbeit wurden ausgewählte CND-Proben der EDX-, FTIR-, NMR-, TCSPC-, Partikelgrößen (TEM)-, TGA- und XRD-Analyse unterzogen. Die hierbei gewonnenen Erkenntnisse stützen die Theorie, dass die photophysikalischen Eigenschaften der CNDs durch ihre Oberflächenzustände bestimmt werden und dass die s.g. ”Riesen-Rotkanten-Anregungsverschiebung” (GREES, engl. Giant Red Edge Excitation Shift) eine mögliche Ursache für die häufig beobachtete Anregungswellenlängenabhängigkeit der Emissionswellenlänge (bzw. selektive Lumineszenz) in CNDs ist. KW - carbon dots KW - carbon nanodots KW - fluorescence KW - high quantum yield KW - microwave synthesis KW - white carbon KW - Kohlenstoff-Punkte KW - Kohlenstoff-Nanopunkte KW - Fluoreszenz KW - hohe Quantenausbeute KW - mikrowellengestützte Synthese KW - weißer Kohlenstoff Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-410160 ER -