TY - GEN A1 - Banerjee, Shiladitya A1 - Stüker, Tony A1 - Saalfrank, Peter T1 - Vibrationally resolved optical spectra of modified diamondoids obtained from time-dependent correlation function methods N2 - Optical properties of modified diamondoids have been studied theoretically using vibrationally resolved electronic absorption, emission and resonance Raman spectra. A time-dependent correlation function approach has been used for electronic two-state models, comprising a ground state (g) and a bright, excited state (e), the latter determined from linear-response, time-dependent density functional theory (TD-DFT). The harmonic and Condon approximations were adopted. In most cases origin shifts, frequency alteration and Duschinsky rotation in excited states were considered. For other cases where no excited state geometry optimization and normal mode analysis were possible or desired, a short-time approximation was used. The optical properties and spectra have been computed for (i) a set of recently synthesized sp2/sp3 hybrid species with C[double bond, length as m-dash]C double-bond connected saturated diamondoid subunits, (ii) functionalized (mostly by thiol or thione groups) diamondoids and (iii) urotropine and other C-substituted diamondoids. The ultimate goal is to tailor optical and electronic features of diamondoids by electronic blending, functionalization and substitution, based on a molecular-level understanding of the ongoing photophysics. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 211 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-86826 ER - TY - GEN A1 - Mondal, Suvendu Sekhar A1 - Marquardt, Dorothea A1 - Janiak, Christoph A1 - Holdt, Hans-Jürgen T1 - Use of a 4,5-dicyanoimidazolate anion based ionic liquid for the synthesis of iron and silver nanoparticles N2 - Sixteen new ionic liquids (ILs) with tetraethylammonium, 1-butyl-3-methylimidazolium, 3-methyl-1-octylimidazolium and tetrabutylphosphonium cations paired with 2-substituted 4,5-dicyanoimidazolate anions (substituent at C2 = methyl, trifluoromethyl, pentafluoroethyl, N,N′-dimethyl amino and nitro) have been synthesized and characterized by using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA). The effects of cation and anion type and structure of the resulting ILs, including several room temperature ionic liquids (RTILs), are reflected in the crystallization, melting points and thermal decomposition of the ILs. ILs exhibited large liquid and crystallization ranges and formed glasses on cooling with glass transition temperatures in the range of −22 to −71 °C. We selected one of the newly designed ILs due to its bigger size, compared to the common conventional IL anion and high electron-withdrawing nitrile group leads to an overall stabilization anion that may stabilize the metal nanoparticles. Stable and better separated iron and silver nanoparticles are obtained by the decomposition of corresponding Fe2(CO)9 and AgPF6, respectively, under N2-atmosphere in newly designed nitrile functionalized 4,5-dicyanoimidazolate anion based IL. Very small and uniform size for Fe-nanoparticles of about 1.8 ± 0.6 nm were achieved without any additional stabilizers or capping molecules. Comparatively bigger size of Ag-nanoparticles was obtained through the reduction of AgPF6 by hydrogen gas. Additionally, the AgPF6 precursor was decomposed under microwave irradiation (MWI), fabricating nut-in-shell-like, that is, core-separated-from-shell Ag-nano-structures. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 220 Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-89696 SP - 5476 EP - 5483 ER - TY - GEN A1 - Kumke, Michael Uwe A1 - Klier, Dennis Tobias T1 - Upconversion NaYF4:Yb:Er nanoparticles co-doped with Gd3+ and Nd3+ for thermometry on the nanoscale N2 - In the present work, the upconversion luminescence properties of oleic acid capped NaYF4:Gd3+:Yb3+:Er3+ upconversion nanoparticles (UCNP) with pure β crystal phase and Nd3+ ions as an additional sensitizer were studied in the temperature range of 288 K < T < 328 K. The results of this study showed that the complex interplay of different mechanisms and effects, causing the special temperature behavior of the UCNP can be developed into thermometry on the nanoscale, e.g. to be applied in biological systems on a cellular level. The performance was improved by the use of Nd3+ as an additional dopant utilizing the cascade sensitization mechanism in tri-doped UCNP. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 304 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-102677 SP - 67149 EP - 67156 ER - TY - GEN A1 - Klier, Dennis Tobias A1 - Kumke, Michael Uwe T1 - Upconversion NaYF4:Yb:Er nanoparticles co-doped with Gd3+ and Nd3+ for thermometry on the nanoscale N2 - In the present work, the upconversion luminescence properties of oleic acid capped NaYF4:Gd3+:Yb3+:Er3+ upconversion nanoparticles (UCNP) with pure β crystal phase and Nd3+ ions as an additional sensitizer were studied in the temperature range of 288 K < T < 328 K. The results of this study showed that the complex interplay of different mechanisms and effects, causing the special temperature behavior of the UCNP can be developed into thermometry on the nanoscale, e.g. to be applied in biological systems on a cellular level. The performance was improved by the use of Nd3+ as an additional dopant utilizing the cascade sensitization mechanism in tri-doped UCNP. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 216 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-89618 SP - 67149 EP - 67156 ER - TY - GEN A1 - Lohren, Hanna A1 - Bornhorst, Julia A1 - Galla, Hans-Joachim A1 - Schwerdtle, Tanja T1 - The blood–cerebrospinal fluid barrier BT - First evidence for an active transport of organic mercury compounds out of the brain N2 - Exposure to organic mercury compounds promotes primarily neurological effects. Although methylmercury is recognized as a potent neurotoxicant, its transfer into the central nervous system (CNS) is not fully evaluated. While methylmercury and thiomersal pass the blood–brain barrier, limited data are available regarding the second brain regulating interface, the blood–cerebrospinal fluid (CSF) barrier. This novel study was designed to investigate the effects of organic as well as inorganic mercury compounds on, and their transfer across, a porcine in vitro model of the blood–CSF barrier for the first time. The barrier system is significantly more sensitive towards organic Hg compounds as compared to inorganic compounds regarding the endpoints cytotoxicity and barrier integrity. Whereas there are low transfer rates from the blood side to the CSF side, our results strongly indicate an active transfer of the organic mercury compounds out of the CSF. These results are the first to demonstrate an efflux of organic mercury compounds regarding the CNS and provide a completely new approach in the understanding of mercury compounds specific transport. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 200 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-82089 ER - TY - GEN A1 - Prestel, Andreas A1 - Möller, Heiko Michael T1 - Spatio-temporal control of cellular uptake achieved by photoswitchable cell-penetrating peptides N2 - The selective uptake of compounds into specific cells of interest is a major objective in cell biology and drug delivery. By incorporation of a novel, thermostable azobenzene moiety we generated peptides that can be switched optically between an inactive state and an active, cell-penetrating state with excellent spatio-temporal control. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 218 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-89658 SP - 701 EP - 704 ER - TY - GEN A1 - Megow, Jörg A1 - Röhr, Merle I. S. A1 - Schmidt am Busch, Marcel A1 - Renger, Thomas A1 - Mitrić, Roland A1 - Kirstein, Stefan A1 - Rabe, Jürgen P. A1 - May, Volkhard T1 - Site-dependence of van der Waals interaction explains exciton spectra of double-walled tubular J-aggregates N2 - The simulation of the optical properties of supramolecular aggregates requires the development of methods, which are able to treat a large number of coupled chromophores interacting with the environment. Since it is currently not possible to treat large systems by quantum chemistry, the Frenkel exciton model is a valuable alternative. In this work we show how the Frenkel exciton model can be extended in order to explain the excitonic spectra of a specific double-walled tubular dye aggregate explicitly taking into account dispersive energy shifts of ground and excited states due to van der Waals interaction with all surrounding molecules. The experimentally observed splitting is well explained by the site-dependent energy shift of molecules placed at the inner or outer side of the double-walled tube, respectively. Therefore we can conclude that inclusion of the site-dependent dispersive effect in the theoretical description of optical properties of nanoscaled dye aggregates is mandatory. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 191 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-79978 SP - 6741 EP - 6747 ER - TY - GEN A1 - Jahn, Karolina A1 - Buschmann, Volker A1 - Hille, Carsten T1 - Simultaneous Fluorescence and Phosphorescence Lifetime Imaging Microscopy in Living Cells N2 - In living cells, there are always a plethora of processes taking place at the same time. Their precise regulation is the basis of cellular functions, since small failures can lead to severe dysfunctions. For a comprehensive understanding of intracellular homeostasis, simultaneous multiparameter detection is a versatile tool for revealing the spatial and temporal interactions of intracellular parameters. Here, a recently developed time-correlated single-photon counting (TCSPC) board was evaluated for simultaneous fluorescence and phosphorescence lifetime imaging microscopy (FLIM/PLIM). Therefore, the metabolic activity in insect salivary glands was investigated by recording ns-decaying intrinsic cellular fluorescence, mainly related to oxidized flavin adenine dinucleotide (FAD) and the μs-decaying phosphorescence of the oxygen-sensitive ruthenium-complex Kr341. Due to dopamine stimulation, the metabolic activity of salivary glands increased, causing a higher pericellular oxygen consumption and a resulting increase in Kr341 phosphorescence decay time. Furthermore, FAD fluorescence decay time decreased, presumably due to protein binding, thus inducing a quenching of FAD fluorescence decay time. Through application of the metabolic drugs antimycin and FCCP, the recorded signals could be assigned to a mitochondrial origin. The dopamine-induced changes could be observed in sequential FLIM and PLIM recordings, as well as in simultaneous FLIM/PLIM recordings using an intermediate TCSPC timing resolution. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 202 KW - Confocal microscopy KW - Fluorescence imaging KW - Fluorescence spectroscopy KW - Fluorescent probes Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-82156 ER - TY - THES A1 - Soulié, Virginie T1 - Sessile droplets of salt solutions on inert and metallic surfaces T1 - Gouttes sessiles de solutions salines sur des surfaces inertes et métalliques BT - influence of salt concentration gradients on evaporation and corrosion behaviour BT - influence des gradients de concentration en sel sur la dynamique d’Evaporation et le processus de corrosion N2 - In this thesis we investigate the evaporation behaviour of sessile droplets of aqueous saline solutions on planar inert and metallic surfaces and characterise the corrosion phenomenon for iron surfaces. First we study the evaporation behaviour of sessile salty droplets on inert surfaces for a wide range of salt concentrations, relative humidities, droplet sizes and contact angles. Our study reveals the range of validity of the well-accepted diffusion-controlled evaporation model and highlights the impact of salt concentration (surface tension) gradients driven Marangoni flows on the evaporation behaviour and the subsequent salty deposit patterns. Furthermore we study the spatial-temporal evolution of sessile droplets from saline solutions on metallic surfaces. In contrast to the simple, generally accepted Evans droplet model, we show that the corrosion spreads ahead of the macroscopic contact line with a peripheral film. The three-phase contact line is destabilized by surface tension gradients induced by ionic composition changes during the course of the corrosion process and migration of cations towards the droplet perimeter. Finally we investigate the corrosion behaviour under drying salty sessile droplets on metallic surfaces. The corrosion process, in particular the location of anodic and cathodic activities over the footprint droplet area is correlated to the spatial distribution of the salt inside the drying droplet. N2 - Dans cette thèse, la dynamique d’évaporation de gouttes sessiles de solutions salines sur des surfaces planes inertes et métalliques a été étudiée et le phénomène de corrosion pour les surfaces ferriques caractérisé. En premier lieu, nous nous sommes intéressés à la dynamique d’évaporation de gouttes sessiles salées sur des surfaces inertes pour une large gamme de concentrations en sel, d’humidité relatives, de tailles de goutte et d’angles de contact. Notre étude révèle les domaines de validité du modèle classique d’évaporation, processus contrôlé par la diffusion de la vapeur dans l’air et met en évidence l’impact de flux (de Marangoni) induits par des gradients de concentration (tension de surface) en sel sur la dynamique d’évaporation et les dépôts salins obtenus après évaporation de la goutte. De plus, nous nous sommes consacrés à l’évolution spatio-temporelle de gouttes sessiles de solutions salines sur des surfaces métalliques. Contrairement au modèle simplifié de la goutte d’Evans, nous avons montré que le processus de corrosion s’étend aux abords de la ligne de contact, avec la formation d’un film périphérique. La ligne triple est déstabilisée par des gradients de tension de surface induits par des variations de composition ionique au cours du processus de corrosion et la migration des cations vers la périphérie de la goutte. Enfin nous avons étudié le phénomène de corrosion du métal induit par l’évaporation de gouttes sessiles salées. Le processus de corrosion, en particulier la localisation des réactions anodiques et cathodiques sur la surface métallique en contact avec la goutte est corrélée à la distribution spatiale du sel au sein de la goutte s’évaporant. KW - sessile droplet KW - salt KW - evaporation KW - corrosion KW - liegende Tropfen KW - Salz KW - Verdunstung KW - Korrosion KW - gouttes sessiles KW - sel KW - evaporation KW - corrosion Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-90329 ER - TY - GEN A1 - Kirchhecker, Sarah A1 - Tröger-Müller, Steffen A1 - Bake, Sebastian A1 - Antonietti, Markus A1 - Taubert, Andreas A1 - Esposito, Davido T1 - Renewable pyridinium ionic liquids from the continuous hydrothermal decarboxylation of furfural-amino acid derived pyridinium zwitterions N2 - Fully renewable pyridinium ionic liquids were synthesised via the hydrothermal decarboxylation of pyridinium zwitterions derived from furfural and amino acids in flow. The functionality of the resulting ionic liquid (IL) can be tuned by choice of different amino acids as well as different natural carboxylic acids as the counterions. A representative member of this new class of ionic liquids was successfully used for the synthesis of ionogels and as a solvent for the Heck coupling. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 198 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-81390 ER - TY - GEN A1 - Bodrova, Anna A1 - Chechkin, Aleksei V. A1 - Cherstvy, Andrey G. A1 - Metzler, Ralf T1 - Quantifying non-ergodic dynamics of force-free granular gases N2 - Brownianmotion is ergodic in the Boltzmann–Khinchin sense that long time averages of physical observables such as the mean squared displacement provide the same information as the corresponding ensemble average, even at out-of-equilibrium conditions. This property is the fundamental prerequisite for single particle tracking and its analysis in simple liquids. We study analytically and by event-driven molecular dynamics simulations the dynamics of force-free cooling granular gases and reveal a violation of ergodicity in this Boltzmann-Khinchin sense as well as distinct ageing of the system. Such granular gases comprise materials such as dilute gases of stones, sand, various types of powders, or large molecules, and their mixtures are ubiquitous in Nature and technology, in particular in Space. We treat—depending on the physical-chemical properties of the inter-particle interaction upon their pair collisions—both a constant and a velocity-dependent (viscoelastic) restitution coefficient e. Moreover we compare the granular gas dynamics with an effective single particle stochastic model based on an underdamped Langevin equation with time dependent diffusivity. We find that both models share the same behaviour of the ensemble mean squared displacement (MSD) and the velocity correlations in the limit of weak dissipation. Qualitatively, the reported non-ergodic behaviour is generic for granular gases with any realistic dependence of e on the impact velocity of particles. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 206 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-85200 ER - TY - GEN A1 - Vacogne, Charlotte D. A1 - Schlaad, Helmut T1 - Primary ammonium/tertiary amine-mediated controlled ring opening polymerisation of amino acid N-carboxyanhydrides N2 - Stable commercial primary ammonium chlorides were combined with tertiary amines to initiate the controlled ring opening polymerisation of amino acid N-carboxyanhydrides to yield polypeptides with defined end group structure, predetermined molar mass and narrow molar mass distribution. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 307 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-102718 SP - 15645 EP - 15648 ER - TY - THES A1 - Grygiel, Konrad T1 - Poly(ionic liquid) stabilizers and new synthetic approaches T1 - Polyionische Flüssigkeiten als Stabilisatoren und neue Synthesewege N2 - The main focus of the present thesis was to investigate the stabilization ability of poly(ionic liquid)s (PILs) in several examples as well as develop novel chemical structures and synthetic routes of PILs. The performed research can be specifically divided into three parts that include synthesis and application of hybrid material composed of PIL and cellulose nanofibers (CNFs), thiazolium-containing PILs, and main-chain imidazolium-type PILs. In the first chapter, a vinylimidazolium-type IL was polymerized in water in the presence of CNFs resulting in the in situ electrostatic grafting of polymeric chains onto the surface of CNFs. The synthesized hybrid material merged advantages of its two components, that is, superior mechanical strength of CNFs and anion dependent solution properties of PILs. In contrast to unmodified CNFs, the hybrid could be stabilized and processed in organic solvents enabling its application as reinforcing agent for porous polyelectrolyte membranes. In the second part, PILs and ionic polymers containing two types of thiazolium repeating units were synthesized. Such polymers displayed counterion dependent thermal stability and solubility in organic solvents of various dielectric constants. This new class of PILs was tested as stabilizers and phase transfer agents for carbon nanotubes in aqueous and organic media, and as binder materials to disperse electroactive powders and carbon additives in solid electrode in lithium-ion batteries. The incorporation of S and N atoms into the polymeric structures make such PILs also potential precursors for S, N - co-doped carbons. In the last chapter, reactants originating from biomass were successfully harnessed to synthesize main-chain imidazolium-type PILs. An imidazolium-type diester IL obtained via a modified Debus-Radziszewski reaction underwent transesterification with diol in a polycondensation reaction. This yielded a polyester-type PIL which CO2 sorption properties were investigated. In the next step, the modified Debus-Radziszewski reaction was further applied to synthesize main-chain PILs according to a convenient, one-step protocol, using water as a green solvent and simple organic molecules as reagents. Depending on the structure of the employed diamine, the synthesized PILs after anion exchange showed superior thermal stability with unusually high carbonization yields. Overall, the outcome of these studies will actively contribute to the current research on PILs by introducing novel PIL chemical structures, improved synthetic routes, and new examples of stabilized materials. The synthesis of main-chain imidazolium-type PILs by a modified Debus-Radziszewski reaction is of a special interest for the future work on porous ionic liquid networks as well as colloidal PIL nanoparticles. N2 - Im Mittelpunkt der vorliegenden Arbeit stand die Entwicklung neuer polymerer ionischen Flüssigkeiten (PILs) mittels neuer Synthesewege als auch auf diesen PILs basierenden Kompositmaterialien. Die hergestellten Materialien wurden folgend hinsichtlich ihrer Tauglichkeit als Stabilisatoren, Phasentransferreagenzien, „binder“ oder CO2-Absorber untersucht. Die Untersuchungen lassen sich in drei Teile untergliedern und beinhalten Herstellung und Anwendungsuntersuchungen von Hybridmaterialien basierend auf PILs und Cellulosefasern im Nanometerbereich (CNF), von PILs mit Thiazoliumgruppen und schließlich PILs welche teilweise oder vollständig aus Biomaterialien hergestellt wurden mit Imidazoliumgruppen in der Hauptkette. In Gegenwart von CNF wurde eine vinylimidazoliumbasierte ionische Flüssigkeit (IL) in Wasser polymerisiert. Dies führte in situ zu einem elektrostatischen angraften der Ketten auf der Oberfläche der CNFs. Diese Kompositmaterialien vereinigen die Vorteile beider Komponenten, die außerordentliche mechanische Stabilität der CNFs und die vielseitigen mittels Gegenionen einstellbaren Lösungseigenschaften der PIL. Beispielsweise können diese Hybridmaterialien im Gegensatz zu den unmodifizierten CNFs in organischen Lösungsmitteln und somit zur Verstärkung für poröse Polyelektrolytmembranen eingesetzt werden. Im zweiten Teil wurden PILs und ioniosche Polymere synthetisiert mit Thiazoliumkationen in den Monomerbausteinen. Diese Polymere zeigten eine vom Gegenion abhängige thermische Stabilität und Löslichkeit in Lösungsmitteln verschiedenster Dielektrizitätskonstanten. Diese neue Klasse der PILs bzw. ionischen Polymere wurde hinsichtlich der Nutzbarkeit als Vorläufer für Stickstoff- und Schwefel-codotierte Kohlenstoffsysteme, Stabilisator sowie Phasentransferreagenz für „carbon nanotubes“ in wässrigem und organischen Lösungsmitteln und „binder“ für Elektrodenmaterialien in Lithiumionenbatterien. Im letzten Teil wurden aus Biomaterialien die Ausgangsstoffe für PILs mit imidazoliumbasierter Hauptkette gewonnen. Hierzu wurde der imidazoliumbasierende Diester mittels abgewandelter Debus-Radziszewski-Reaktion gewonnen und eine Umesterung mittels eines ebenfalls aus Biomaterialien stammenden Diols vorgenommen. Die erhaltene polyesterbasierte PIL wurde folgend hinsichtlich ihres CO2 – Absorbtionspotentials untersucht. Die geänderte Debus-Radziszewski-Reaktion wurde folgend für eine PIL-Einstufensynthese mit Wasser als grünem Lösungsmittel und einfachen hauptsächlich aus Biomasse gewonnen Reagenzien herangezogen. Abhängig von den eingesetzten Diaminen und Gegenionen konnten für die hergestellten PILs hervorragende thermische Stabilitäten oder beträchtliche Karbonisierungsausbeuten erreicht werden, welche für PILs zu den höchsten publizierten Werten in der Literatur zählen. Die vorgelegten Studien stellen einen wichtigen Beitrag auf dem Gebiet der PIL-Forschung dar mit neuen PIL-Strukturen, verbesserten Synthesewegen und neuen Stabilisierungsmöglichkeiten. Die Synthese der Hauptkettenimidazolium-PIL mittels angepasster Debus-Radziszewski-Reaktion ist eine vielversprechende Methode sowohl für die Herstellung poröser IL-Netzwerke als auch kolloidaler PIL-Nanopartikel. KW - ionic polymers KW - polymerised ionic liquids KW - ionic liquids KW - Debus-Radziszewski polymerization KW - thiazolium KW - ionische Flüssigkeit KW - Thiazol-Salze KW - ionischen Polymere KW - elektroaktive Polymere Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-80367 ER - TY - GEN A1 - Mai, Tobias A1 - Boye, Susanne A1 - Yuan, Jiayin A1 - Völkel, Antje A1 - Gräwert, Marlies A1 - Günter, Christina A1 - Lederer, Albena A1 - Taubert, Andreas T1 - Poly(ethylene oxide)-based block copolymers with very high molecular weights for biomimetic calcium phosphate mineralization N2 - The present article is among the first reports on the effects of poly(ampholyte)s and poly(betaine)s on the biomimetic formation of calcium phosphate. We have synthesized a series of di- and triblock copolymers based on a non-ionic poly(ethylene oxide) block and several charged methacrylate monomers, 2-(trimethylammonium)ethyl methacrylate chloride, 2-((3-cyanopropyl)-dimethylammonium)ethyl methacrylate chloride, 3-sulfopropyl methacrylate potassium salt, and [2-(methacryloyloxy)ethyl]dimethyl-(3-sulfopropyl)ammonium hydroxide. The resulting copolymers are either positively charged, ampholytic, or betaine block copolymers. All the polymers have very high molecular weights of over 106 g mol−1. All polymers are water-soluble and show a strong effect on the precipitation and dissolution of calcium phosphate. The strongest effects are observed with triblock copolymers based on a large poly(ethylene oxide) middle block (nominal Mn = 100 000 g mol−1). Surprisingly, the data show that there is a need for positive charges in the polymers to exert tight control over mineralization and dissolution, but that the exact position of the charge in the polymer is of minor importance for both calcium phosphate precipitation and dissolution. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 208 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-85299 ER - TY - GEN A1 - Schulze, Michael A1 - Utecht, Manuel Martin A1 - Moldt, Thomas A1 - Przyrembel, Daniel A1 - Gahl, Cornelius A1 - Weinelt, Martin A1 - Saalfrank, Peter A1 - Tegeder, Petra T1 - Nonlinear optical response of photochromic azobenzene-functionalized self-assembled monolayers N2 - The combination of photochromic and nonlinear optical (NLO) properties of azobenzene-functionalized self-assembled monolayers (SAMs) constitutes an intriguing step towards novel photonic and optoelectronic devices. By utilizing the second-order NLO process of second harmonic generation (SHG), supported by density-functional theory and correlated wave function method calculations, we demonstrate that the photochromic interface provides the necessary prerequisites en route towards possible future technical applications: we find a high NLO contrast on the order of 16% between the switching states. These are furthermore accessible reversibly and with high efficiencies in terms of cross sections on the order of 10−18 cm2 for both photoisomerization reactions, i.e., drivable by means of low-power LED light sources. Finally, both photostationary states (PSSs) are thermally stable at ambient conditions. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 196 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-81198 ER - TY - THES A1 - Enzenberg, Anne T1 - Neue fluoreszierende Copolymere für sensitive Detektionssysteme in Wasser T1 - New fluorescent copolymers for sensitive detection systems in water N2 - Ziel dieser Arbeit war die Synthese und Charakterisierung von neuartigen fluoreszierenden Copolymeren zur Analytdetektion in wässrigen Systemen. Das Detektionssystem sollte ein einfaches Schalten der Fluoreszenz bei Analytbindung „Aus“ bzw. Verdrängung „An“ ermöglichen. Dafür wurde die Synthese eines funktionalisierten Monomers so geplant, dass sich Fluorophor und Analyt innerhalb derselben Monomereinheit in direkter Nachbarschaft zueinander befinden. So sollten bei Erkennung des Analyten durch eine mit einem Fluoreszenzlöscher funktionalisierte Erkennungsstruktur Fluorophor und Löscher in einen vorgegebenen Abstand zueinander gezwungen und die Fluoreszenz des Fluorophors effizient gelöscht werden. Bei anschließender Verdrängung der Erkennungseinheit durch einen stärker bindenden Analyten sollte die Fluoreszenz wieder „angeschaltet“ werden. Eine weitere Zielstellung für das Detektionssystem war eine hohe Löslichkeit und Fluoreszenzintensität in Wasser. Da die Anwendung solcher Sensoren besonders in der Medizin und Biologie, z.B. für Schnellerkennungstest von Pathogenen, von Interesse ist, ist die Kompatibilität mit wässrigen Medien essentiell. Die funktionalisierten Monomere wurden frei radikalisch mit N Vinyl-pyrrolidon bzw. N Vinyl¬caprolactam zu wasserlöslichen, fluoreszierenden Copolymeren umgesetzt. In den N-Vinyl¬pyrrolidon-Polymeren (PNVP) wurde RhodaminB, in den thermoresponsiven N Vinyl¬caprolactam-Polymeren (PNVCL) ein Naphthalsäureimid als Fluorophor verwendet. Während Rhodamine eine hohe Fluoreszenzintensität, gute Quantenausbeuten und hohen Extinktionskoeffizienten in Wasser zeigen, sind Naphthalsäure¬imide umgebungssensitive Chromophore, die bei Änderung ihrer Lösungsmittelumgebung, wie z.B. beim Kollaps eines thermoresponsiven Polymers in Wasser, ihre Fluoreszenzintensität und Quantenausbeute drastisch ändern können. Der Vorteil der hier verwendeten Strategie der Monomersynthese liegt darin, dass bei jeder spezifischen Analytdetektion durch eine Erkennungseinheit die Fluoreszenz effizient gelöscht bzw. bei Verdrängung durch einen stärker bindenden Analyten wieder „angeschaltet“ wird. Dieses Prinzip wird bereits vielfach in der Biologie in sogenannten „Molecular Beacons“ ausgenutzt, wobei ein Fluorophor und ein Löscher durch spezifische DNA Basenpaarung in einen vorgegebenen Abstand zueinander gezwungen werden und so ein „Schalten“ der Fluoreszenz ermöglichen. Aufgrund der vorgegebenen Struktur der DNA Basensequenzen ist es jedoch nicht direkt auf andere Erkennungsreaktionen übertragbar. Daher wurde ein Modellsystem entwickelt, welches die Möglichkeit bietet Analyt, Erkennungseinheit und Signalgeber variabel, je nach Anforderungen des Systems, auszutauschen. So soll es möglich sein, den Sensor a priori für jede Erkennungs¬reaktion zu verwenden. Als Modell Bindungs¬paare wurden ß Cyclodextrin/Adamantan und Con¬cana¬valinA/Mannose ausgewählt. Adamantan bzw. Mannose wurde als Analyt zusammen mit dem Fluorophor in das Polymer eingebunden. ß Cyclo¬dextrin (ß CD) bzw. ConcanavalinA (ConA) wurde als Erkennungsstruktur an einem Fluoreszenzlöscher immobilisiert. Polymer-basierte Fluoreszenzsensoren sind in der Fachliteratur gut dokumentiert. In der Regel sind Signalgeber und Analyt jedoch statistisch im Polymer verteilt, da sie sich entweder in unterschiedlichen Monomereinheiten befinden oder die Funktionalisierung durch eine polymeranaloge Umsetzung erfolgt. Der gewählte Ansatz Fluorophor und Analyt innerhalb derselben Monomereinheit einzubinden, soll bei jeder Erkennungsreaktion des Analyten zu einer Änderung der Signalintensität des Fluorophors führen. Eine hohe Signalintensität bei Analytdetektion ist wünschenswert, insbesondere für Erkennungsreaktionen, die mit möglichst geringem apparativem Aufwand, am besten mit dem bloßen Auge zu verfolgen sein sollen. Des Weiteren ist es möglich den Fluorophorgehalt im Polymer genau einzustellen und so Selbstlöschung zu vermeiden. Die synthetisierten Polymere haben einen Fluorophorgehalt von 0,01 mol% bis 0,5 mol%. Für die RhodaminB haltigen Polymere zeigte sich, dass ein Fluorophorgehalt unterhalb 0,1 mol% im Polymer die höchsten Ausbeuten, Molmassen und Quantenausbeuten liefert. Für die Naphthalsäureimid haltigen Polymere hingegen wurden auch für einen Fluorophorgehalt von bis zu 1 mol% hohe Ausbeuten und Molmassen erreicht. Die Naphthalsäureimid haltigen Polymere haben jedoch in wässriger Lösungsmittelumgebung nur geringe Quantenausbeuten. Als Fluoreszenzlöscher wurden Goldnanopartikel synthetisiert, die mit den entsprechenden Erkennungsstrukturen (ß-CD oder ConA) für den verwendeten Analyten funktionalisiert wurden. Goldnanopartikel als Löscher bieten den Vorteil, dass ihre Dispergierbarkeit in einem Lösemittel durch Funktionalisierung ihrer Hülle gezielt gesteuert werden kann. Durch die hohe Affinität von Goldnanopartikeln zu Thiolen und Aminen konnten sie mit Hilfe einfacher Syntheseschritte mit Thio ß CD Derivaten bzw. ConA funktionalisiert werden. In der hier vorgelegten Arbeit sollte ein Modellsystem für einen solches fluoreszenz-basiertes Detektionssystem in Wasser entwickelt werden. Nachfolgend werden die zu erfüllenden strukturellen Voraussetzungen für die Synthese eines solchen Sensors nochmals zusammengefasst: 1. Verwendung eines Fluorophors, der eine hohe Signalintensität zeigt. 2. Analyt bzw. Erkennungseinheit soll sich im Abstand von wenigen Nanometern zum Signalgeber befinden, um bei jeder Detektionsreaktion die Signalintensität des Signalgebers beeinflussen zu können. 3. Die Detektionseinheit benötigt eine funktionelle Gruppe zur Immobilisierung. Immobilisierung kann z.B. durch Einbindung in ein Polymer erfolgen. 4. Der Fluorophor soll bei Änderung seiner lokalen Umgebung, durch Binden eines Löschers oder Änderung seiner Lösemittelumgebung seine Fluoreszenzeigenschaften drastisch ändern. 5. Die Reaktion sollte schnell und mit möglichst geringem apparativem Aufwand, am besten mit bloßem Auge zu verfolgen sein. Für das ß-CD/Adamantan Modellsystem wurde ein Fluoreszenz Aus/An Sensor entwickelt, der bei Binden ß CD funktionalisierter Goldnanopartikel an das polymergebundene Adamantan die Fluoreszenz des RhodaminB Fluorophors effizient löscht und bei Verdrängung der Goldnanopartikel wieder zurück gewinnt. Dies konnte auch mit bloßem Auge verfolgt werden. Für die Naphthalsäureimid Monomere, die mit NVCL copolymerisiert wurden, wurde abhängig von der lokalen Umgebung des Fluorophors eine unterschiedliche Verstärkung der Fluoreszenzintensität bei Überschreiten des Trübungspunktes des Polymers gefunden. Dabei zeigte sich, dass die Einführung eines Abstandshalters zwischen Polymerrückgrat und Fluorophor zu einer großen Fluoreszenz¬verstärkung führt, während sich ohne Abstandshalter die Fluoreszenzintensität bei Über¬schreiten des Trübungspunktes kaum ändert. N2 - Novel fluorescent copolymers for analyte detection in aqueous media have been synthesized and characterized. The detection system is designed to switch fluorescence between an “Off” state for analyte binding and an “On” state for analyte displacement. A functional monomer was synthesized in which fluorophore and analyte are placed close to each other within the same monomer unit. If the fluorescence quencher labeled recognition unit detects an analyte, fluorophore and quencher are forced in a very short distance to each other and fluorescence is quenched efficiently. The recognition unit is afterwards replaced through a stronger binding analyte and fluorescence should be “turned on” again. Another requirement for the detection system was high solubility and fluorescence intensity in water. Water compatibility is essential for implementation of such sensor systems especially in medicine and biology, e.g. for fast testing systems of pathogens. The synthesized monomers have been copolymerized in a free radical polymerization with N vinyl¬pyrrolidone or N vinylcaprolactame to give fluorescent, water soluble copolymers. For the N vinyl-pyrrolidone polymers (PNVP) a rhodamineB fluorophore was used whereas for the thermoresponsive N vinyl-caprolactame polymers (PNVCL) a naphthalimide fluorophore was used in the comonomer. While rhodamines are well known for their high fluorescence intensity, quantum yield and extinction coefficient in water, naphthalimides are known to be environment sensitive fluorophores who can change their fluorescence intensity drastically depending on their local solvent vicinity. Such a functional monomer design should give the advantage of efficient fluorescence quenching during analyte binding and fluorescence enhancement when the recognition unit is afterwards displaced. This principle is often used in systems like molecular beacons. Fluorophore and quencher are forced in a given distance through specific DNA base pairing and fluorescence can be switched. Because of the given DNA base sequence this detection system cannot be directly implemented to other recognition reactions. Here a model system was developed which gives the possibility to vary analyte, recognition unit and fluorophore. This way it should be possible to adopt the sensor a priori to every recognition reaction. ß-cyclodextrin/adamantane and concana¬valinA/mannose were chosen as model binding pairs. Adamantane or mannose and the fluorophore are attached to the polymer backbone. The ß cyclodextrin (ß-CD) or concanavalinA (ConA) recognition unit is immobilized on a fluorescence quencher. Polymer based fluorescence sensors are well known in literature. Usually fluorophore and analyte are statistically spread in the polymer because they are independently incorporated via different monomer units or functionalization is done polymer analog. To place fluorophore and analyte in the same monomer unit should have the benefit that every recognition event also leads to a change of signal intensity of the fluorophore. High signal intensity is crucial especially for recog¬nition reactions which should be tracked with only simple equipment or even with the naked eye. Even more it is possible to adjust the fluorophore content in the polymer. The synthesized polymers have a fluorophore content between 0.01 mol% and 0.5 mol%. For the rhodamineB containing polymers a fluorophore content below 0.1 mol% gives the highest yields, molecular weight and quantum yields. The polymers which contain naphthalimide as fluorophore give high yields and molecular weight up to 1 mol% of fluorophore content in the polymer but the quantum yields are in general low in aqueous media. Gold nano¬particles (Au NP) are synthesized as fluorescence quencher and functionalized with the recognition units (ß-CD or ConA) for analyte detection. Gold nanoparticles as fluorescence quencher have the advantage that their dispersibility in a solvent can be controlled by the choice of ligand used for the stabilization of the particles. Because of their high affinity to thiols and amines it was possible to synthesize thio-ß-CD and ConA functionalized gold nanoparticles in only a few synthetic steps.   Here a model system for fluorescent detection in water is presented. The structural requirements that have to be fulfilled for the synthesis of such a detection system are summarized: 1. The fluorophore needs to have high signal intensity. 2. Analyte or recognition unit have to be only a few nanometer apart from the signaling unit so every recognition reaction leads to a change of signal intensity. 3. The detection unit needs a functional group for immobilization. Immobilization can be done for example in a polymer matrix. 4. The fluorophore should change its fluorescence properties drastically through change of its local environment for example when binding a fluorescence quencher. 5. Reaction should be fast and detection should be possible with only little equipment or even with the naked eye It was possible to synthesis a fluorescence Off/On sensor for a ß-CD/adamantane model system. Fluorescence of the rhodamineB fluorophore is quenched during binding of ß-CD-Au-NPs and efficiently enhanced when the ß-CD-Au-NPs are displaced through a better binding analyte which can be even followed by the naked eye (Scheme 1). For the naphthalimide containing thermoresponsive N-vinylcaprolactame polymers a dependence of the fluorescence enhancement at polymer collapse is found depending on the local vicinity of the fluorophore. Introducing a spacer between fluorophore and polymer backbone leads to a high fluorescence enhancement while polymers without a spacer show almost no fluorescence enhancement during the collapse. KW - Fluoreszenzsensor KW - fluorescence sensor KW - thermoresponsiv KW - thermoresponsive KW - ß-Cyclodextrin KW - ß-cyclodextrine KW - Rhodamin B KW - rhodamine b KW - Naphthalimid KW - naphthalimide KW - Solvatochromie KW - solvatochrome KW - N-Vinylpyrrolidon KW - N-vinylpyrrolidone KW - N-Vinylcaprolactam KW - N-vinylcaprolactame Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-82325 ER - TY - GEN A1 - Nöchel, Ulrich A1 - Reddy, Chaganti Srinivasa A1 - Wang, Ke A1 - Cui, Jing A1 - Zizak, Ivo A1 - Behl, Marc A1 - Kratz, Karl A1 - Lendlein, Andreas T1 - Nanostructural changes in crystallizable controlling units determine the temperature-memory of polymers N2 - Temperature-memory polymers remember the temperature, where they were deformed recently, enabled by broad thermal transitions. In this study, we explored a series of crosslinked poly[ethylene-co-(vinyl acetate)] networks (cPEVAs) comprising crystallizable polyethylene (PE) controlling units exhibiting a pronounced temperature-memory effect (TME) between 16 and 99 °C related to a broad melting transition (∼100 °C). The nanostructural changes in such cPEVAs during programming and activation of the TME were analyzed via in situ X-ray scattering and specific annealing experiments. Different contributions to the mechanism of memorizing high or low deformation temperatures (Tdeform) were observed in cPEVA, which can be associated to the average PE crystal sizes. At high deformation temperatures (>50 °C), newly formed PE crystals, which are established during cooling when fixing the temporary shape, dominated the TME mechanism. In contrast, at low Tdeform (<50 °C), corresponding to a cold drawing scenario, the deformation led preferably to a disruption of existing large crystals into smaller ones, which then fix the temporary shape upon cooling. The observed mechanism of memorizing a deformation temperature might enable the prediction of the TME behavior and the knowledge based design of other TMPs with crystallizable controlling units. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 194 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-81124 SP - 8284 EP - 8293 ER - TY - GEN A1 - Hildebrand, Viet A1 - Laschewsky, André A1 - Wischerhoff, Erik T1 - Modulating the solubility of zwitterionic poly((3- methacrylamidopropyl)ammonioalkane sulfonate)s in water and aqueous salt solutions via the spacer group separating the cationic and the anionic moieties N2 - Complementary to the well-established zwitterionic monomer 3-((3-methacrylamidopropyl)dimethylammonio) propane-1-sulfonate (SPP), the closely related monomers 2-hydroxy-3-((3-methacrylamidopropyl) dimethylammonio)propane-1-sulfonate (SHPP) and 4-((3-methacrylamidopropyl)dimethylammonio)-butane-1-sulfonate (SBP) were synthesised and polymerised by reversible addition–fragmentation chain transfer (RAFT) polymerisation, using a fluorophore labeled RAFT agent. The polyzwitterions of systematically varied molar masses were characterised with respect to their solubility in water and aqueous salt solutions. Both poly(sulfobetaine)s show thermoresponsive behaviour in water, exhibiting phase separation at low temperatures and upper critical solution temperatures (UCST). For both polySHPP and polySBP, cloud points depend notably on the molar mass, and are much higher in D2O than in H2O. Also, the cloud points are effectively modulated by the addition of salts. The individual effects can be in parts correlated to the Hofmeister series for the anions studied. Still, they depend in a complex way on the concentration and the nature of the added electrolytes, on the one hand, and on the detailed nature of the spacer group separating the anionic and the cationic charges of the betaine moiety, on the other hand. As anticipated, the cloud points of polySBP are much higher than the ones of the analogous polySPP of identical molar mass. Surprisingly, the cloud points of polySHPP are also somewhat higher than the ones of their polySPP analogues, despite the additional hydrophilic hydroxyl group present in the spacer separating the ammonium and the sulfonate moieties. These findings point to a complicated interplay of the various hydrophilic components in polyzwitterions with respect to their overall hydrophilicity. Thus, the spacer group in the betaine moiety proves to be an effective additional molecular design parameter, apparently small variations of which strongly influence the phase behaviour of the polyzwitterions in specific aqueous environments. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 309 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-103040 SP - 731 EP - 740 ER - TY - GEN A1 - Kröner, Dominik T1 - Laser-driven electron dynamics for circular dichroism in mass spectrometry BT - from one-photon excitations to multiphoton ionization N2 - The distinction of enantiomers is a key aspect of chemical analysis. In mass spectrometry the distinction of enantiomers has been achieved by ionizing the sample with circularly polarized laser pulses and comparing the ion yields for light of opposite handedness. While resonant excitation conditions are expected to be most efficient, they are not required for the detection of a circular dichroism (CD) in the ion yield. However, the prediction of the size and sign of the circular dichroism becomes challenging if non-resonant multiphoton excitations are used to ionize the sample. Employing femtosecond laser pulses to drive electron wavepacket dynamics based on ab initio calculations, we attempt to reveal underlying mechanisms that determine the CD under non-resonant excitation conditions. Simulations were done for (R)-1,2-propylene oxide, using time-dependent configuration interaction singles with perturbative doubles (TD-CIS(D)) and the aug-cc-pVTZ basis set. Interactions between the electric field and the electric dipole and quadrupole as well as between the magnetic field and the magnetic dipole were explicitly accounted for. The ion yield was determined by treating states above the ionization potential as either stationary or non-stationary with energy-dependent lifetimes based on an approved heuristic approach. The observed population dynamics do not allow for a simple interpretation, because of highly non-linear interactions. Still, the various transition pathways are governed by resonant enantiospecific n-photon excitation, with preferably high transition dipole moments, which eventually dominate the CD in the ionized population. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 201 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-82109 ER - TY - GEN A1 - Guha, S. A1 - Warsinke, A. A1 - Tientcheu, Ch. M. A1 - Schmalz, K. A1 - Meliani, C. A1 - Wenger, Ch. T1 - Label free sensing of creatinine using a 6 GHz CMOS near-field dielectric immunosensor N2 - In this work we present a CMOS high frequency direct immunosensor operating at 6 GHz (C-band) for label free determination of creatinine. The sensor is fabricated in standard 0.13 μm SiGe:C BiCMOS process. The report also demonstrates the ability to immobilize creatinine molecules on a Si3N4 passivation layer of the standard BiCMOS/CMOS process, therefore, evading any further need of cumbersome post processing of the fabricated sensor chip. The sensor is based on capacitive detection of the amount of non-creatinine bound antibodies binding to an immobilized creatinine layer on the passivated sensor. The chip bound antibody amount in turn corresponds indirectly to the creatinine concentration used in the incubation phase. The determination of creatinine in the concentration range of 0.88–880 μM is successfully demonstrated in this work. A sensitivity of 35 MHz/10 fold increase in creatinine concentration (during incubation) at the centre frequency of 6 GHz is gained by the immunosensor. The results are compared with a standard optical measurement technique and the dynamic range and sensitivity is of the order of the established optical indication technique. The C-band immunosensor chip comprising an area of 0.3 mm2 reduces the sensing area considerably, therefore, requiring a sample volume as low as 2 μl. The small analyte sample volume and label free approach also reduce the experimental costs in addition to the low fabrication costs offered by the batch fabrication technique of CMOS/BiCMOS process. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 195 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-81177 ER -