TY - THES A1 - Justynska, Justyna T1 - Towards a library of functional block copolymers : synthesis and colloidal properties T1 - Hin zu einer Bibliothek von funktionalen Blockcopolymeren : Synthese und kolloidale Eigenschaften N2 - Understanding the principles of self-organisation exhibited by block copolymers requires the combination of synthetic and physicochemical knowledge. The ability to synthesise block copolymers with desired architecture facilitates the ability to manipulate their aggregation behaviour, thus providing the key to nanotechnology. Apart from relative block volumes, the size and morphology of the produced nanostructures is controlled by the effective incompatibility between the different blocks. Since polymerisation techniques allowing for the synthesis of well-defined block copolymers are restricted to a limited number of monomers, the ability to tune the incompatibility is very limited. Nevertheless, Polymer Analogue Reactions can offer another possibility for the production of functional block copolymers by chemical modifications of well-defined polymer precursors. Therefore, by applying appropriate modification methods both volume fractions and incompatibility, can be adjusted. Moreover, copolymers with introduced functional units allow utilization of the concept of molecular recognition in the world of synthetic polymers. The present work describes a modular synthetic approach towards functional block copolymers. Radical addition of functional mercaptanes was employed for the introduction of diverse functional groups to polybutadiene-containing block copolymers. Various modifications of 1,2-polybutadiene-poly(ethylene oxide) block copolymer precursors are described in detail. Furthermore, extension of the concept to 1,2-polybutadiene-polystyrene block copolymers is demonstrated. Further investigations involved the self-organisation of the modified block copolymers. Formed aggregates in aqueous solutions of block copolymers with introduced carboxylic acid, amine and hydroxyl groups as well as fluorinated chains were characterised. Study of the aggregation behaviour allowed general conclusions to be drawn regarding the influence of the introduced groups on the self-organisation of the modified copolymers. Finally, possibilities for the formation of complexes, based on electrostatic or hydrogen-bonding interactions in mixtures of block copolymers bearing mutually interacting functional groups, were investigated. N2 - Um die Prinzipien der Selbstorganisation von Blockcopolymeren zu verstehen, ist es notwendig das Wissen auf den Gebieten der Synthese und der Physikochemie zu kombinieren. Die Fähigkeit, Blockcopolymere mit gewünschter Architektur zu synthetisieren, gibt einem auch die Möglichkeit das Aggregationsverhalten zu steuern, was wiederum der Schlüssel zur Nanotechnologie ist. Abgesehen von den relativen Blockvolumina, wird die Größe und Morphologie der gebildeten Nanostrukturen durch die effektive Inkompartibilität zwischen den unterschiedlichen Blöcken bestimmt. Da die Polymerisationstechniken, mit denen man gut definierte Blockcopolymere synthetisieren kann, auf bestimmte Monomere beschränkt sind, läßt sich diese Inkompatibilität nur eingeschränkt abstimmen. Polymeranaloge Reaktionen können dagegen eine Möglichkeit bieten, funktionale Blockcopolymere durch die chemische Modifizierung von gut definierten Copolymeren zu erhalten. Somit können, bei Verwendung von geeigneten Modifikationsmethoden, die Volumenanteile sowie die Inkompatibilität der Blöcke angepasst werden. Außerdem können Copolymere, die funktionelle Gruppe enthalten, es ermöglichen das Prinzip der molekularen Erkennung (Schloss-Schlüssel) auf dem Gebiet der synthetischen Polymere anzuwenden. Die vorleigende Arbeit beschreibt einen Ansatz zur modularen Synthese von funktionalen Blockcopolymeren. Durch radikalische Addition von funktionellen Mercaptanen wurden in Copolymere mit einem Polybutadien-Block verschiedenen funktionelle Gruppen eingebracht. Von 1,2-Polybutadien-Polyethylenoxid Blockcopolymeren werden dabei mehrere Modifikationen im Detail beschrieben. Zudem wird die Erweiterung des Konzepts auf 1,2-Polybutadien-Polystyrol Blockcopolymere gezeigt. Die weiteren Untersuchungen betrafen die Selbstorganisation der modifizierten Blockcopolymere in Lösung. Hierbei wurden die Aggregate, die in wässriger Lösung von Blockcopolymeren mit Carbonsäure-, Amin- und Hydroxylgruppen sowie fluorierte Ketten gebildet werden, charakterisiert. Die Untersuchung des Aggregationsverhaltens erlaubt es, generelle Aussagen über den Einfluss der eingebrachten Gruppen auf die Selbstorganisation der modifizierten Copolymere zu treffen. Abschließend wurde die Bildung von Komplexen auf der Basis von elektrostatischer Wechselwirkung oder Wasserstoffbrückenbindung in Mischungen aus Copolymeren, die untereinander Wechselwirkende funktionale Gruppe besitzen, untersucht. T2 - Towards a library of functional block copolymers : synthesis and colloidal properties KW - Blockcopolymere KW - Funktionalisierung KW - Selbstorganisation KW - Kolloid KW - Komplexe KW - Thiole KW - block copolymers KW - functionalization KW - self-organisation KW - colloids KW - complexes Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-5907 ER - TY - THES A1 - Garnweitner, Georg T1 - Nichtwässrige Synthese und Bildungsmechanismus von Übergangsmetalloxid-Nanopartikeln = Nonaqueous synthesis of transition-metal oxide nanoparticles and their formation mechanism T1 - Nichtwässrige Synthese und Bildungsmechanismus von Übergangsmetalloxid-Nanopartikeln N2 - In this work, the nonaqueous synthesis of binary and ternary metal oxide nanoparticles is investigated for a number of technologically important materials. A strong focus was put on studying the reaction mechanisms leading to particle formation upon solvothermal treatment of the precursors, as an understanding of the formation processes is expected to be crucial for a better control of the systems, offering the potential to tailor particle size and morphology. The synthesis of BaTiO3 was achieved by solvothermal reaction of metallic barium and titanium isopropoxide in organic solvents. Phase-pure, highly crystalline particles about 6 nm in size resulted in benzyl alcohol, whereas larger particles could be obtained in ketones such as acetone or acetophenone. In benzyl alcohol, a novel mechanism was found to lead to BaTiO3, involving a C–C coupling step between the isopropoxide ligand and the benzylic carbon of the solvent. The resulting coupling product, 4-phenyl-2-butanol, is found in almost stoichiometric yield. The particle formation in ketones proceeds via a Ti-mediated aldol condensation of the solvent, involving formal elimination of water which induces formation of the oxide. These processes also occurred when reacting solely the titanium alkoxide with ketones or aldehydes, leading to highly crystalline anatase nanoparticles for all tested solvents. In ketones, also the synthesis of nanopowders of lead zirconate titanate (PZT) was achieved, which were initially amorphous but could be crystallized by calcination at moderate temperatures. Additionally, PZT films were prepared by simply casting a suspension of the powder onto Si substrates followed by calcination.Solvothermal synthesis however is not restricted to alkoxides as precursors but is also achieved from metal acetylacetonates. The use of benzylamine as solvent proved particularly versatile, making possible the synthesis of nanocrystalline In2O3, Ga2O3, ZnO and iron oxide from the respective acetylacetonates. During the synthesis, the acetylacetonate ligand undergoes a solvolysis under C–C cleavage, resulting in metal-bound enolate ligands which, in analogy to the synthesis in ketones, induce ketimine and aldol condensation reactions. In the last section of this work, surface functionalization of anatase nanoparticles is explored. The particles were first capped with various organic ligands via a facile in situ route, which resulted in altered properties such as enhanced dispersibility in various solvents. In a second step, short functional oligopeptide segments were attached to the particles by means of a catechol linker to achieve advanced self-assembly properties. N2 - Die vorliegende Arbeit befasst sich mit der nichtwässrigen Synthese binärer und ternärer Metalloxid-Nanopartikel durch solvothermale Behandlung von Metalloxid-Vorstufen in organischen Lösungsmitteln. Dabei wurde besonderes Augenmerk auf die Reaktionsmechanismen gelegt, da eine genaue Kenntnis des Bildungsmechanismus eine bessere Kontrolle über das Partikelwachstum erwarten lässt, woraus sich die Möglichkeit der genauen Steuerung von Partikelgröße und –form ableitet. Bariumtitanat (BaTiO3) konnte durch solvothermale Reaktion von metallischem Barium und Titanisopropoxid in organischen Lösungsmitteln hergestellt werden. Hochkristalline, phasenreine Partikel von etwa 6 nm Durchmesser wurden in Benzylalkohol erhalten, während in Ketonen wie Aceton oder Acetophenon größere Partikel entstanden. In Benzylalkohol läuft ein neuartiger Reaktionsmechanismus ab, der eine C–C-Kupplungsreaktion zwischen dem Isopropoxid und dem benzylischen Kohlenstoffatom des Lösungsmittels umfasst. Das Kupplungsprodukt 4-Phenyl-2-butanol wird in praktisch stöchiometrischer Ausbeute erhalten. In Ketonen verläuft die Partikelbildung über eine titankatalysierte Aldolkondensation des Lösungsmittels, die formell die Eliminierung von Wasser einschließt, was zur Bildung des Oxids führt. Diese Prozesse liefen auch bei Umsetzung von reinem Titanisopropoxid in Ketonen oder Aldehyden ab, wobei hier hochkristalline Anatas-Nanopartikel entstanden. Auch die Synthese von Bleizirkonat-titanat-Nanopulvern war in Ketonen möglich; die zunächst amorphen Pulver konnten durch Kalzinierung bei relativ geringen Temperaturen in kristalline Nanopartikel überführt werden. Zusätzlich wurden Filme durch Auftragen einer Suspension der Pulver auf Siliziumwafer und anschließende Kalzinierung hergestellt.Die solvothermale Synthese kann allerdings auch ausgehend von Metallacetylacetonaten durchgeführt werden. Benzylamin erwies sich hier als ein sehr vielseitiges Lösungsmittel und ermöglichte die Synthese von nanokristallinem In2O3, Ga2O3, ZnO und Eisenoxid ausgehend von den jeweiligen Acetylacetonaten. Im Verlauf der Synthese wird der Acetylacetonatligand unter C–C-Bindungsspaltung solvolysiert. Die entstehenden Enolatliganden reagieren dann unter Ketimin- und Aldolkondensation analog der Solvothermalsynthese in Ketonen weiter. Der letzte Teil dieser Arbeit beschäftigt sich mit der Funktionalisierung der Partikel. Zunächst wurden TiO2-Partikel durch verschiedene organische Liganden „in situ“ funktionalisiert, wodurch Eigenschaften wie etwa die Dispergierbarkeit in unterschiedlichen Lösungsmitteln beeinflusst werden konnten. In einem zweiten Schritt wurden kurze Oligopeptidketten über eine Katecholbrücke an die Partikel geknüpft, um anspruchsvolle Selbstanordnungseigenschaften zu erzielen. KW - Nanopartikel KW - Oxidkeramik KW - Bariumtitanat KW - PZT KW - Reaktionsmechanismus KW - Funktionalisierung KW - Selbstorganisation KW - nichtwässrige Synthese KW - Solvothermalsynthese KW - C-C Bindungsknüpfung KW - Sol-Gel KW - nonaqueous synthesis KW - solvothermal synthesis KW - C-C bond formation KW - sol-gel Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-5892 ER -