TY - THES A1 - Grochowska, Marta T1 - Ökonomische, soziale und räumliche Folgen der saisonalen Arbeitsmigration im Herkunftsgebiet : am Beispiel der Region Konin (Polen) T1 - Economic, social and spatial consequences of seasonal migration in the place of origin – case study : Konin (Poland) N2 - Die vorliegende Arbeit basiert auf Forschungen in den Jahren 2007-2009. Sie betrachtet die saisonale Arbeitsmigration aus der polnischen Region Konin, wo die Arbeitsmigration aus ökonomischen Gründen, wie auch in ähnlich strukturierten Gebieten Polens, eine lange Tradition hat, die bis ins 19. Jahrhundert zurückgeht. Sie wird die saisonale Migration ins Ausland mit den ökonomischen, sozialen und räumlichen Auswirkungen aus der Perspektive des Einzelnen und seiner unmittelbaren Umgebung, aber auch der Gesellschaft und Herkunftsgebiet der Migranten betrachtet. N2 - Mobility for economic reasons is treated in science primarily from the perspective of permanent resettlement. However, other varieties of migration are more and more often studied. This paper deals with the seasonal migration for economic reasons, which is an important area of migration undertaken for economic reasons. Seasonal migration, which leads to crossing the country borders, in the literature is called the Transnational Migration. Unlike international migration, which is usually connected with a permanent settling in the target area, the concept of Transnational migration describes the situation, in which migrants return to their place of origin and do not give it up as their main residence, but every time they travel to another country to get employed. As a research area of this work, the Konin region was chosen, because - in comparison with other regions in Poland - the phenomenon of a very high level of seasonal migration was observed there. Seasonal labor migration is a long tradition that goes back to 19. century here and in other Polish regions with similar structure. From the results of conducted in 2007−2009 research, some general facts can be drawn. Due to the seasonal work abroad, a seasonal migrant can increase their and their family’s standard of living. If the cost of living in the place of seasonal work is higher than in the place of origin, the profit of such visits is obviously higher if the family of a seasonal worker remains in the place of origin. This leads to the geographic division bet389 ween the place of working and place of permanent residence. Higher wages can be determined at the level of benefits to both personal and societal level. On the other hand, both forprofit workers and society in dealing with this phenomenon, costs cannot be ignored. This paper considers the pros and cons of seasonal paid work, both from the perspective of individuals and their surroundings, and the consequences for society and region of origin of the employee. This paper is considering economic, social and spatial consequences, each time at the macro and micro levels. The study was based primarily on interviews with several respondents and experts in the subject of Polish and German migrations for profit. T3 - Potsdamer Geographische Forschungen - 29 KW - saisonale Arbeitsmigration KW - transnationale Migration KW - Transnationalismus KW - Polen KW - Region Konin KW - Sachsengängerei KW - seasonal labor migration KW - transnational migration KW - transnationalism KW - Poland KW - Konin region KW - Sachsengängerei Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-49649 SN - 978-3-86956-137-0 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - THES A1 - Ehrke, Jürgen T1 - Zur Stabilisierung fragmentierter Staaten T1 - On the stabilization of fragmented states BT - Dezentralisierung, Entwicklungszusammenarbeit und das Gespenst des Separatismus BT - decentralization, development cooperation and the spectre of secession N2 - Die internationale Staatengemeinschaft steht Sezessionsbestrebungen zur Aufspaltung bestehender Staaten gewöhnlich ablehnend gegenüber. Gleichzeitig wendet sie in vielen Ländern Instrumente der Entwicklungspolitik an und greift so auch in den dortigen politischen Prozess ein. Untersucht wird, inwiefern Entwicklungspolitik so gestaltet werden kann, dass sie nicht, quasi als Nebenwirkung, einer Sezessionsbewegung zum Durchbruch verhilft. Betrachtet wird dabei neben der gezielten Förderung wirtschaftlichen Wachstums auch das Instrument der Dezentralisierung, das oft als Mittel zur „Beruhigung“ separatistischer Bestrebungen vorgeschlagen wird. Zuvor jedoch wird aufgewiesen, dass eine Politik, die Sezessionen verhindern will, zumindest in vielen Fällen auch moralphilosophisch schlüssig begründet werden kann. Den Abschluss der Arbeit bilden drei Fallstudien zu Sezessionen auf dem Gebiet der ehemaligen Sowjetunion. N2 - The international community is usually set against secessionist movements that aim at the splitting up of existing states. At the same time, in many countries instruments of development policy are applied, that automatically influence the political process there. The investigation here seeks to answer the question whether development policies can be designed in a way that they don’t unwillingly trigger secession as a side effect. In doing so, the focus is not only on growth-enhancing policies, but also on the instrument of decentralization, which is often presented as a tool suited to appease separatist movements. Prior to that, though, it is demonstrated that a policy aiming at the prevention of secessions can – in many cases at least – be justified with sound arguments of moral philosophy. The concluding chapter looks at three case studies of secessions that have been attempted on the territory of the former Soviet Union. KW - Separatismus KW - Sezession KW - fragmentierte Staaten KW - Dezentralisierung KW - Entwicklungszusammenarbeit KW - Georgien KW - Transnistrien KW - Tschetschenien KW - separatism KW - secession KW - fragmented states KW - decentralization KW - development aid KW - Georgia KW - Transnistria KW - Chechnya Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-53975 SN - 978-3-86956-155-4 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - THES A1 - Krey, Olaf T1 - Zur Rolle der Mathematik in der Physik : Wissenschaftstheoretische Aspekte und Vorstellungen Physiklernender T1 - The role of mathematics in physics : considerations from the philosophy of science and learners' conceptions N2 - Mathematik spielt im Physikunterricht eine nicht unerhebliche Rolle - wenn auch eine zwiespältige. Oft wird sie sogar zum Hindernis beim Lernen von Physik und kann ihr emanzipatorisches Potenzial nicht entfalten. Die vorliegende Arbeit stellt zwei Bausteine für eine begründete Konzeption zum Umgang mit Mathematik beim Lernen von Physik zur Verfügung. Im Theorieteil der Arbeit werden zum Einen wissenschaftstheoretische Aspekte der Rolle der Mathematik in der Physik aufgearbeitet und der physikdidaktischen Forschungsgemeinschaft im Zusammenhang zugänglich gemacht. Zum anderen werden Forschungsergebnisse zu Vorstellungen Lernender über Physik und Mathematik sowie im Bereich der Epistemologie zusammengestellt. Im empirischen Teil der Arbeit werden Vorstellungen zur Rolle der Mathematik in der Physik von Schülerinnen und Schülern der Klassenstufen 10 und 12 sowie Physik-Lehramtstudierenden im Grundstudium mit Hilfe eines Fragebogens erhoben und unter Verwendung inhaltsanalytischer bzw. statistischer Methoden ausgewertet. Die Ergebnisse zeigen unter Anderem, dass Mathematik im Physikunterricht entgegen gängiger Meinungen bei den Lernenden nicht negativ, aber zumindest bei jüngeren Lernenden formal und algorithmisch konnotiert ist. N2 - Mathematics plays an important, but ambivalent role in the physics classroom. Often mathematics becomes an obstacle in learning physics and cannot reveal its emancipatory potential. This thesis provides two components of a well-grounded conception for handling mathematics in the learning of physics. In the theoretical part of the thesis epistemological aspects of the role of mathematics in physics are being processed and made accessible to the community of physics education researchers. At the same time, research data on learners’ epistemological beliefs about physics and mathematics are compiled. In the empirical part of the thesis a questionnaire was designed to collect data on beliefs about the role of mathematics in physics from pupils of grade 10 and 12 as well as undergraduate physics teacher students. Content-analytical and statistical methods have been applied in the processing of the questionnaires. The results revealed, among others, that mathematics in the physics classroom is not, against common belief, evaluated negatively by learners. Yet, at least younger learners perceive the use of mathematics in physics to be mainly formal and algorithmic. KW - Physik KW - Wissenschaftstheorie KW - Vorstellungen KW - Mathematikdidaktik KW - Physikdidaktik KW - physics KW - philosophy of science KW - conceptions KW - mathematics education KW - science education Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-59412 ER - TY - THES A1 - Wang, Long T1 - X-tracking the usage interest on web sites T1 - X-tracking des Nutzungsinteresses für Webseiten N2 - The exponential expanding of the numbers of web sites and Internet users makes WWW the most important global information resource. From information publishing and electronic commerce to entertainment and social networking, the Web allows an inexpensive and efficient access to the services provided by individuals and institutions. The basic units for distributing these services are the web sites scattered throughout the world. However, the extreme fragility of web services and content, the high competence between similar services supplied by different sites, and the wide geographic distributions of the web users drive the urgent requirement from the web managers to track and understand the usage interest of their web customers. This thesis, "X-tracking the Usage Interest on Web Sites", aims to fulfill this requirement. "X" stands two meanings: one is that the usage interest differs from various web sites, and the other is that usage interest is depicted from multi aspects: internal and external, structural and conceptual, objective and subjective. "Tracking" shows that our concentration is on locating and measuring the differences and changes among usage patterns. This thesis presents the methodologies on discovering usage interest on three kinds of web sites: the public information portal site, e-learning site that provides kinds of streaming lectures and social site that supplies the public discussions on IT issues. On different sites, we concentrate on different issues related with mining usage interest. The educational information portal sites were the first implementation scenarios on discovering usage patterns and optimizing the organization of web services. In such cases, the usage patterns are modeled as frequent page sets, navigation paths, navigation structures or graphs. However, a necessary requirement is to rebuild the individual behaviors from usage history. We give a systematic study on how to rebuild individual behaviors. Besides, this thesis shows a new strategy on building content clusters based on pair browsing retrieved from usage logs. The difference between such clusters and the original web structure displays the distance between the destinations from usage side and the expectations from design side. Moreover, we study the problem on tracking the changes of usage patterns in their life cycles. The changes are described from internal side integrating conceptual and structure features, and from external side for the physical features; and described from local side measuring the difference between two time spans, and global side showing the change tendency along the life cycle. A platform, Web-Cares, is developed to discover the usage interest, to measure the difference between usage interest and site expectation and to track the changes of usage patterns. E-learning site provides the teaching materials such as slides, recorded lecture videos and exercise sheets. We focus on discovering the learning interest on streaming lectures, such as real medias, mp4 and flash clips. Compared to the information portal site, the usage on streaming lectures encapsulates the variables such as viewing time and actions during learning processes. The learning interest is discovered in the form of answering 6 questions, which covers finding the relations between pieces of lectures and the preference among different forms of lectures. We prefer on detecting the changes of learning interest on the same course from different semesters. The differences on the content and structure between two courses leverage the changes on the learning interest. We give an algorithm on measuring the difference on learning interest integrated with similarity comparison between courses. A search engine, TASK-Moniminer, is created to help the teacher query the learning interest on their streaming lectures on tele-TASK site. Social site acts as an online community attracting web users to discuss the common topics and share their interesting information. Compared to the public information portal site and e-learning web site, the rich interactions among users and web content bring the wider range of content quality, on the other hand, provide more possibilities to express and model usage interest. We propose a framework on finding and recommending high reputation articles in a social site. We observed that the reputation is classified into global and local categories; the quality of the articles having high reputation is related with the content features. Based on these observations, our framework is implemented firstly by finding the articles having global or local reputation, and secondly clustering articles based on their content relations, and then the articles are selected and recommended from each cluster based on their reputation ranks. N2 - Wegen des exponentiellen Ansteigens der Anzahl an Internet-Nutzern und Websites ist das WWW (World Wide Web) die wichtigste globale Informationsressource geworden. Das Web bietet verschiedene Dienste (z. B. Informationsveröffentlichung, Electronic Commerce, Entertainment oder Social Networking) zum kostengünstigen und effizienten erlaubten Zugriff an, die von Einzelpersonen und Institutionen zur Verfügung gestellt werden. Um solche Dienste anzubieten, werden weltweite, vereinzelte Websites als Basiseinheiten definiert. Aber die extreme Fragilität der Web-Services und -inhalte, die hohe Kompetenz zwischen ähnlichen Diensten für verschiedene Sites bzw. die breite geographische Verteilung der Web-Nutzer treiben einen dringenden Bedarf für Web-Manager und das Verfolgen und Verstehen der Nutzungsinteresse ihrer Web-Kunden. Die Arbeit zielt darauf ab, dass die Anforderung "X-tracking the Usage Interest on Web Sites" erfüllt wird. "X" hat zwei Bedeutungen. Die erste Bedeutung ist, dass das Nutzungsinteresse von verschiedenen Websites sich unterscheidet. Außerdem stellt die zweite Bedeutung dar, dass das Nutzungsinteresse durch verschiedene Aspekte (interne und externe, strukturelle und konzeptionelle) beschrieben wird. Tracking zeigt, dass die Änderungen zwischen Nutzungsmustern festgelegt und gemessen werden. Die Arbeit eine Methodologie dar, um das Nutzungsinteresse gekoppelt an drei Arten von Websites (Public Informationsportal-Website, E-Learning-Website und Social-Website) zu finden. Wir konzentrieren uns auf unterschiedliche Themen im Bezug auf verschieden Sites, die mit Usage-Interest-Mining eng verbunden werden. Education Informationsportal-Website ist das erste Implementierungsscenario für Web-Usage-Mining. Durch das Scenario können Nutzungsmuster gefunden und die Organisation von Web-Services optimiert werden. In solchen Fällen wird das Nutzungsmuster als häufige Pagemenge, Navigation-Wege, -Strukturen oder -Graphen modelliert. Eine notwendige Voraussetzung ist jedoch, dass man individuelle Verhaltensmuster aus dem Verlauf der Nutzung (Usage History) wieder aufbauen muss. Deshalb geben wir in dieser Arbeit eine systematische Studie zum Nachempfinden der individuellen Verhaltensweisen. Außerdem zeigt die Arbeit eine neue Strategie, dass auf Page-Paaren basierten Content-Clustering aus Nutzungssite aufgebaut werden. Der Unterschied zwischen solchen Clustern und der originalen Webstruktur ist der Abstand zwischen Zielen der Nutzungssite und Erwartungen der Designsite. Darüber hinaus erforschen wir Probleme beim Tracking der Änderungen von Nutzungsmustern in ihrem Lebenszyklus. Die Änderungen werden durch mehrere Aspekte beschrieben. Für internen Aspekt werden konzeptionelle Strukturen und Funktionen integriert. Der externe Aspekt beschreibt physische Eigenschaften. Für lokalen Aspekt wird die Differenz zwischen zwei Zeitspannen gemessen. Der globale Aspekt zeigt Tendenzen der Änderung entlang des Lebenszyklus. Eine Plattform "Web-Cares" wird entwickelt, die die Nutzungsinteressen findet, Unterschiede zwischen Nutzungsinteresse und Website messen bzw. die Änderungen von Nutzungsmustern verfolgen kann. E-Learning-Websites bieten Lernmaterialien wie z.B. Folien, erfaßte Video-Vorlesungen und Übungsblätter an. Wir konzentrieren uns auf die Erfoschung des Lerninteresses auf Streaming-Vorlesungen z.B. Real-Media, mp4 und Flash-Clips. Im Vergleich zum Informationsportal Website kapselt die Nutzung auf Streaming-Vorlesungen die Variablen wie Schauzeit und Schautätigkeiten während der Lernprozesse. Das Lerninteresse wird erfasst, wenn wir Antworten zu sechs Fragen gehandelt haben. Diese Fragen umfassen verschiedene Themen, wie Erforschung der Relation zwischen Teilen von Lehrveranstaltungen oder die Präferenz zwischen den verschiedenen Formen der Lehrveranstaltungen. Wir bevorzugen die Aufdeckung der Veränderungen des Lerninteresses anhand der gleichen Kurse aus verschiedenen Semestern. Der Differenz auf den Inhalt und die Struktur zwischen zwei Kurse beeinflusst die Änderungen auf das Lerninteresse. Ein Algorithmus misst die Differenz des Lerninteresses im Bezug auf einen Ähnlichkeitsvergleich zwischen den Kursen. Die Suchmaschine „Task-Moniminer“ wird entwickelt, dass die Lehrkräfte das Lerninteresse für ihre Streaming-Vorlesungen über das Videoportal tele-TASK abrufen können. Social Websites dienen als eine Online-Community, in den teilnehmenden Web-Benutzern die gemeinsamen Themen diskutieren und ihre interessanten Informationen miteinander teilen. Im Vergleich zur Public Informationsportal-Website und E-Learning Website bietet diese Art von Website reichhaltige Interaktionen zwischen Benutzern und Inhalten an, die die breitere Auswahl der inhaltlichen Qualität bringen. Allerdings bietet eine Social-Website mehr Möglichkeiten zur Modellierung des Nutzungsinteresses an. Wir schlagen ein Rahmensystem vor, die hohe Reputation für Artikel in eine Social-Website empfiehlt. Unsere Beobachtungen sind, dass die Reputation in globalen und lokalen Kategorien klassifiziert wird. Außerdem wird die Qualität von Artikeln mit hoher Reputation mit den Content-Funktionen in Zusammenhang stehen. Durch die folgenden Schritte wird das Rahmensystem im Bezug auf die Überwachungen implementiert. Der erste Schritt ist, dass man die Artikel mit globalen oder lokalen Reputation findet. Danach werden Artikel im Bezug auf ihre Content-Relationen in jeder Kategorie gesammelt. Zum Schluß werden die ausgewählten Artikel aus jedem basierend auf ihren Reputation-Ranking Cluster empfohlen. KW - Tracking KW - Nutzungsinteresse KW - Webseite KW - Tracking KW - Usage Interest KW - Web Sites Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-51077 ER - TY - THES A1 - Nada, Wael Mohamed Abdel-Rahman T1 - Wood compost process engineering, properties and its impact on extreme soil characteristics N2 - The landfilling of biodegradable waste is proven to contribute to environmental degradation. Much wood and lumber is discharged as waste from the cleared fields. These woody wastes are subsequently disposed of by burning. However, it would be preferable to dispose of them without combustion to avoid the release of carbon dioxide, one of the critical greenhouse gases. Instead of burning these woody wastes, we should recycle them as future resources. One solution to this problem is to make compost from the waste. Compost use in agriculture is increasing as both an alternative to landfilling for the management of biodegradable waste, as well as means of increasing or preserving soil organic matter. This research aimed to contribute to the identification of a system for managing the production and utilization of wood waste (Quercus rubra and Pinus sylvestris) compost for sustainable agriculture, with particular regards to carbon dioxide produced from both compost and combustion of wood. Compost of wood was implemented in two consecutive trials. The first was carried out in greenhouse experiment in 4 liter pot of Quercus rubra and Pinus sylvestris (QR and PS) moisted by compost and tap water and infected by tiger worm (Eisenia fetida, EF) and European night crawlers (Dendrobaena veneta, DV) at different mixed ratios with lake mud (LM). The second was conducted in greenhouse experiment in 40 liter pot of the successful wood and worm from the first compost trial (QR and EF respectively). The tested wood (QR) was mixed separately by lake mud and horse manure and irrigated by compost and tap water. The final product, successful wood compost (QR) produced from the first trial (4 liter pot) was utilized in different mixed ratios with coal mine tailings (tertiary sand) in greenhouse pot trial to study his effects on improving soil physical and chemical properties and some plant growth parameters of RSM 7.2.1 grass. The wood compost produced from the second compost experiment (40 liter pot) and other artificial component named Arkadolith® were used as soil amelioration in field experiments of different selected sites with extremely unsuitable characteristics (tertiary and quaternary sand in Lusatia lignite region, Germany). The soil in each site was sowed by RSM 7.2.1 and autochthonous grasses. Also, some vermicompost samples were selected to study its thermal stability which compared with a soil sample (Niedermoorgleys) by using thermogravimetric analysis technique. Further investigation was achieved to evaluate the effect of charcoal as a source of carbon on vermicompost stability. Moreover some selected vermicompost samples were used to examine its microstructure under scanning electron microscope which compared also with the same soil used in thermal analysis. The obtained results under all studied experiments can be arranged as follow: First compost trial, Cumulative amount of carbon dioxide produced during composting period was lower than that evolved by combustion of wood. The results showed composting of wood can reduce the emitted CO2 up to 50 % when compared with the amount of CO2 produced from combustion of wood. The effect of different studied factors on different studied parameters show that, QR wood compost have more responsive to decomposition processes and humification rate in comparison with PS wood compost. Under different infection worms, Eisenia fetida (EF) was better than Dendrobaena veneta (DV) in biodegradation rate. Compost water has had a better impact of tap water in all studied decomposition parameters. For example, The compost content of OM and total OC was decreased with the increase of the decomposition period in the treatments of compost water and EF worm, where this decrease was higher at mixed ratio of 1:3 (wood: mud, w/w). The total content of N in the final products takes reversible trend regarding to OM and C content. The high content of N was found in QR wood compost moisted by compost water and infected by EF worm. The content of both macro-and micro-nutrients was clearly positive affected by the studied factors. The content of these nutrients in QR wood compost was higher than that found in the compost of PS wood. Second compost trial, The observed data show that, the amount of CO2 produced by composting was lower than that evolved by combustion of wood. Composting of wood reduced CO2 emission up to 40 % of the combustion wood CO2. Cumulative amount of CO2 produced from wood compost treated by horse manure was higher than that fount in the other treated by LM. The compost of wood treated by horse manure has had a high decomposition rate in comparison with that treated by lake mud. The treatments left without worms during all composting period and moisted by compost water have a responsive effects but it was lower than that infected by worms. Total and available contents of N, P, K, Mg, Zn, and Cu in the compost treated by HM were higher than that found in compost treated by LM. The other nutrients (Ca, Fe, Cu, and Mn) take reversible trend, which it was higher in LM than HM treatments. Thermal and microstructure analysis, The selected vermicompost samples from both first and second compost experiments showed, up to 200° C temperature the mass loss was due to free water and bound water (It was in vermicompost samples higher than soil sample). Mass loss from 200 to 550° C is due to easily oxidizable organic forms and it was higher in vermicompost than soil. In this stage the soil OM seems to be more stable than vermicompost which can be explained by a more intensive bond between the organic and inorganic components. At higher temperatures (T> 550° C) no significant detectable was appeared of soil organic matter. In contrast, the vermicompost treatments showed a high proportion of stable groups, especially aromatic compounds. These statements seem to be importance particularly for the practical application of the wood compost in terms of their long-term effect in the soil. The application of charcoal, showed no additional stabilizing effect of vermicompost. Also, the data show that, vermicompost structure characterized with high homogeneity and ratio of surface area to volume compared to those in soil structure. First plant trials (greenhouse), Different compost mixed ratios had positive impact on different extreme soil physiochemical properties. At the end of experiment (42 days) compost increased soil water holding capacity, decreased soil bulk and particle density and increased total porosity. The used wood compost modified soil buffering capacity and soil acidity. The availability of soil macro and micro nutrients were increased after adding wood compost. The wood compost had a positive effect in some growth parameters like fresh and dry matter yield of the selected grass. High dry matter yield and nutrients uptake was achieved with higher rates of compost application (25.0% > 12.5% > 3.0% > 0.0 %, w/w). Second plant trials (field experiment), Regarding to the effect of wood compost (QR) and Arkadolith® component on tertiary and quaternary sand, at the end of grown season (6 month) most soil and plant characteristics of tertiary sand were improved and it was better than that in quaternary sand. This trend reveals to, physical and chemical properties of tertiary sand was better than that in quaternary sand, like organic matter content, CEC, WHC, TOC, available nutrients. In the both sites, the effects of different type of soil conditioners arranged as follow: the treatments treated with wood compost is the better followed by the other treated with both wood compost and Arkadolith. Wood compost increased soil pH, CEC, soil buffering capacity, OM content, and soil WHC in comparison with Arkadolith which make a small improvement of these properties in both sites. Finally, Different growth parameters (height, covering, fresh and dry matter yield) of the used grasses were clearly positive affected by wood compost, with the highest production inherent to the treatments treated by the high amount of wood compost. N2 - Entsprechend der Zielstellung wurden zunächst verschiedene Varianten der Kompostierung von Holzsubstanz getestet, um eine optimale Technologie, die auch für Entwicklungsländer realisierbar ist, herauszufinden. Hierzu sind in Pflanztöpfe Holzspäne (Woodchips) von zwei verschieden Holzarten (Laub- und Nadelholz) gefüllt und mit verschiedenen natürlichen Stickstoffquellen gemischt worden. Diese Ansätze wurden regelmäßig mit Kompostwasser appliziert. Nach vier Wochen sind zwei verschiedene Wurmarten (Dendrobaena veneta und Eisenia fetida) hinzugegeben worden. Die Feuchthaltung erfolgte ab diesem Zeitpunkt durch Frischwasser. Die qualitativ beste Versuchsvariante ist im nächsten Schritt mit weiteren natürlichen Stickstoffquellen, die in Entwicklungsländern zur Verfügung gestellt werden könnten, getestet worden. Von allen Kompostvarianten sind im Labor eine Vielzahl von bodenphysikalischen (z.B. Dichte, Wasserhaltekapazität) und bodenchemischen Zustandsgrößen (z.B. Elektrische Leitfähigkeit, Totalgehalte biophiler Elemente, Bodenreaktion, organische Substanzgehalte, Kationenaustauschkapazität) bestimmt worden. Die Wiederum qualitativ beste Mischung ist in einer weiteren Versuchsreihe in verschiedenen Mengenverhältnissen mit tertiärerem Abraumsand des Braunkohlebergbaus gemischt worden. In diese Versuchsmischungen wurde die Grasmischung RSM 7.2.1 eingesät und regelmäßig bewässert sowie die Wuchshöhe gemessen. Nach 42 Tagen wurden das Gras geerntet und die biometrischen Parameter, die Nährstoffgehalte (pflanzenverfügbare Fraktionen), die Bodenreaktion, die effektive bzw. potentielle Kationenaustauschkapazität sowie die Pufferkapazitäten der Mischsubstrate bestimmt. Die nächsten Versuchsvarianten sind als Feldversuche in der Niederlausitz durchgeführt worden. Für ihre Realisierung wurde als weiterer Zuschlagsstoff Arkadolith® zugemischt. Die Plotflächen sind sowohl auf Abraumsanden des Tertiärs als auch Quartärs angelegt worden. In jeweils eine Subvariante ist RSM 7.2.1, in die andere eine autochthone Grasmischung eingesät worden. Diese Experimente wurden nach 6 Monaten beendet, die Bestimmung aller Parameter erfolgte in gleicher Weise wie bei den Gewächshausversuchen. Auf Basis aller Versuchsreihen konnten die besten Kompostqualitäten und ihre optimalen Herstellungsvarianten ermittelt werden. Eine weitere Aufgabe war es zu untersuchen, wie im Vergleich zur Verbrennung von Holzmasse die CO2-Emission in die Atmosphäre durch Holzkompostierung verringert werden kann. Hierzu wurde während der verschiedenen Kompostierungsvarianten die CO2-Freisetzung gemessen. Im Vergleich dazu ist jeweils die gleiche Masse an Holzsubstanz verbrannt worden. Die Ergebnisse zeigten, dass im Vergleich zu der thermischen Verwertung von Holsubstanz die CO2-Emission bis zu 50 % verringert werden kann. Dem Boden kann darüber hinaus energiereiche organische Substanz zugeführt werden, die eine Entwicklung der Bodenorganismen ermöglicht. Ein weiteres Experiment zielte darauf ab, die Stabilität der Holzkomposte zu bestimmen. Darüber hinaus sollte untersucht werden, ob durch die Zufuhr von pyrogenem Kohlenstoff eine Vergrößerung der Stabilität zu erreichen ist. Diese Untersuchungen wurden mit Hilfe der Thermogravimetrie vorgenommen. Alle wichtigen Kompostierungsvarianten sind sowohl mit verschiedenen Zusatzmengen als auch ohne Zusatz von pyrogenem Kohlenstoff vermessen worden. Als Vergleichssubstanz diente der Oberboden eines Niedermoorgleys, der naturgemäß einen relativ hohen Anteil an organischer Substanz aufweist. Die Ergebnisse zeigten, dass im Bereich niedriger Temperaturen die Wasserbindung im Naturboden fester ist. In der Fraktion der oxidierbaren organischen Substanz, im mittleren Temperaturbereich gemessen, ist die natürliche Bodensubstanz ebenfalls stabiler, was auf eine intensivere Bindung zwischen den organischen und anorganischen Bestandteilen, also auf stabilere organisch-mineralische Komplexe, schlussfolgern lässt. Im Bereich höherer Temperaturen (T> 550° C) waren im Naturboden keine nennenswerten organischen Bestandteile mehr nachweisbar. Hingegen wiesen die Kompostvarianten einen hohen Anteil stabiler Fraktionen, vor allem aromatische Verbindungen, auf. Diese Aussagen erscheinen vor allem für die praktische Anwendung der Holzkomposte in Hinblick auf ihre Langzeitwirkung bedeutsam. Der Zusatz von pyrogenem Kohlenstoff zeigte keine zusätzliche Stabilisierungswirkung. T2 - Holzkompostverfahrenstechnik, Eigenschaften und ihre Auswirkungen auf die extremen Bodeneigenschaften KW - Holzkompost KW - Kohlendioxid KW - Eisenia fetida KW - Dendrobaena veneta KW - Kohlengrubenabraum KW - wood compost KW - carbon dioxide KW - Eisenia fetida KW - Dendrobaena veneta KW - coal mine waste Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-51046 ER - TY - THES A1 - Hanisch, Florian T1 - Variational problems on supermanifolds T1 - Variationsprobleme auf Supermannigfaltigkeiten N2 - In this thesis, we discuss the formulation of variational problems on supermanifolds. Supermanifolds incorporate bosonic as well as fermionic degrees of freedom. Fermionic fields take values in the odd part of an appropriate Grassmann algebra and are thus showing an anticommutative behaviour. However, a systematic treatment of these Grassmann parameters requires a description of spaces as functors, e.g. from the category of Grassmann algberas into the category of sets (or topological spaces, manifolds). After an introduction to the general ideas of this approach, we use it to give a description of the resulting supermanifolds of fields/maps. We show that each map is uniquely characterized by a family of differential operators of appropriate order. Moreover, we demonstrate that each of this maps is uniquely characterized by its component fields, i.e. by the coefficients in a Taylor expansion w.r.t. the odd coordinates. In general, the component fields are only locally defined. We present a way how to circumvent this limitation. In fact, by enlarging the supermanifold in question, we show that it is possible to work with globally defined components. We eventually use this formalism to study variational problems. More precisely, we study a super version of the geodesic and a generalization of harmonic maps to supermanifolds. Equations of motion are derived from an energy functional and we show how to decompose them into components. Finally, in special cases, we can prove the existence of critical points by reducing the problem to equations from ordinary geometric analysis. After solving these component equations, it is possible to show that their solutions give rise to critical points in the functor spaces of fields. N2 - In dieser Dissertation wird die Formulierung von Variationsproblemen auf Supermannigfaltigkeiten diskutiert. Supermannigfaltigkeiten enthalten sowohl bosonische als auch fermionische Freiheitsgrade. Fermionische Felder nehmen Werte im ungeraden Teil einer Grassmannalgebra an, sie antikommutieren deshalb untereinander. Eine systematische Behandlung dieser Grassmann-Parameter erfordert jedoch die Beschreibung von Räumen durch Funktoren, z.B. von der Kategorie der Grassmannalgebren in diejenige der Mengen (der topologischen Räume, Mannigfaltigkeiten, ...). Nach einer Einführung in das allgemeine Konzept dieses Zugangs verwenden wir es um eine Beschreibung der resultierenden Supermannigfaltigkeit der Felder bzw. Abbildungen anzugeben. Wir zeigen, dass jede Abbildung eindeutig durch eine Familie von Differentialoperatoren geeigneter Ordnung charakterisiert wird. Darüber hinaus beweisen wir, dass jede solche Abbildung eineindeutig durch ihre Komponentenfelder, d.h. durch die Koeffizienten einer Taylorentwickelung bzgl. von ungeraden Koordinaten bestimmt ist. Im Allgemeinen sind Komponentenfelder nur lokal definiert. Wir stellen einen Weg vor, der diese Einschränkung umgeht: Durch das Vergrößern der betreffenden Supermannigfaltigkeit ist es immer möglich, mit globalen Koordinaten zu arbeiten. Schließlich wenden wir diesen Formalismus an, um Variationsprobleme zu untersuchen, genauer betrachten wir eine super-Version der Geodäte und eine Verallgemeinerung von harmonischen Abbildungen auf Supermannigfaltigkeiten. Bewegungsgleichungen werden von Energiefunktionalen abgeleitet und wir zeigen, wie sie sich in Komponenten zerlegen lassen. Schließlich kann in Spezialfällen die Existenz von kritischen Punkten gezeigt werden, indem das Problem auf Gleichungen der gewöhnlichen geometrischen Analysis reduziert wird. Es kann dann gezeigt werden, dass die Lösungen dieser Gleichungen sich zu kritischen Punkten im betreffenden Funktor-Raum der Felder zusammensetzt. KW - Supergeometrie KW - Variationsrechnung KW - Differentialoperatoren KW - Funktorgeometrie KW - supergeometry KW - variational calculus KW - differential operators KW - functor geometry Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-59757 ER - TY - THES A1 - Heine, Moreen T1 - Transfer von E-Government-Lösungen : Wirkungen und Strategien T1 - Transfer of e-Government solutions : effects and strategies N2 - Der E-Government-Fortschritt wird nach wie vor durch redundante Entwicklungsaktivitäten und isolierte, wenig interoperable Lösungen gehemmt. Die Herausforderung liegt weniger in der Entwicklung und Einführung leistungsstarker Informationssysteme, sondern in der Verbreitung bestehender Lösungen. Die Arbeit identifiziert mögliche Strategien für den Transfer von E-Government-Lösungen zwischen Verwaltungen gleicher wie auch verschiedener föderaler Ebene. Es werden Konzepte zur Diffusion von Innovationen, zum Technologie- wie auch Politiktransfer herangezogen. Weiter werden drei umfangreiche Fallstudien vorgestellt. Sie führen zu transferhemmenden wie auch fördernden Faktoren und somit zu Gestaltungsoptionen für erfolgreiche Transferprozesse unter den vielfältigen Rahmenbedingungen im öffentlichen Sektor. N2 - The research work on transfer strategies explores ways to spread e-government solutions among public administrations. Studies about diffusion of innovations, technology transfer and policy transfer are used. The work is based on outcomes of three case studies, which lead to obstacles and promoters of transfer processes and hence to design options for successful transfers at diverse conditions within public sector in Germany. KW - Transfer KW - E-Government KW - Mobile Bürgerdienste KW - CIO KW - Einheitlicher Ansprechpartner KW - Transfer KW - E-Government KW - Mobile Services KW - CIO KW - Point of Single Contact Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-54155 ER - TY - THES A1 - Tan, Irene T1 - Towards greener stationary phases : thermoresponsive and carbonaceous chromatographic supports T1 - Zu grüner Separation : thermoresponsive und kohlenstoffhaltige chromatographische Trägermaterialien N2 - Polymers which are sensitive towards external physical, chemical and electrical stimuli are termed as ‘intelligent materials’ and are widely used in medical and engineering applications. Presently, polymers which can undergo a physical change when heat is applied at a certain temperature (cloud point) in water are well-studied for this property in areas of separation chemistry, gene and drug delivery and as surface modifiers. One example of such a polymer is the poly (N-isopropylacrylamide) PNIPAAM, where it is dissolved well in water below 32 oC, while by increasing the temperature further leads to its precipitation. In this work, an alternative polymer poly (2-(2-methoxy ethoxy)ethyl methacrylate-co- oligo(ethylene glycol) methacrylate) (P(MEO2MA-co-OEGMA)) is studied due to its biocompatibility and the ability to vary its cloud points in water. When a layer of temperature responsive polymer was attached to a single continuous porous piece of silica-based material known as a monolith, the thermoresponsive characteristic was transferred to the column surfaces. The hybrid material was demonstrated to act as a simple temperature ‘switch’ in the separation of a mixture of five steroids under water. Different analytes were observed to be separated under varying column temperatures. Furthermore, more complex biochemical compounds such as proteins were also tested for separation. The importance of this work is attributed to separation processes utilizing environmentally friendly conditions, since harsh chemical environments conventionally used to resolve biocompounds could cause their biological activities to be rendered inactive. N2 - Polymere, welche empfindlich gegenüber externen physikalischen, chemischen und elektrischen Einflüssen sind, werden „intelligente Materialien“ genannt. Diese werden weitverbreitet in medizinischen und technischen Anwendungen eingesetzt. Auf diesem Gebiet ausführlich erforschte Materialien sind Polymere, welche durch Hitze bei einer bestimmten Temperatur (Trübungspunkt) eine physikalische Veränderung eingehen können, genannt thermoresponsive Polymere. Eingesetzt werden diese z.B. in chromatographischen Trennverfahren, in Gen- und Wirkstofftransport Vorgängen und zur Oberflächenmodifikation. Ein Beispiel für so ein Polymer ist das poly(N-isopropylacrylamide) PNIPAAM, welches unter 32 °C in Wasser gelöst vorliegt und mit Erhöhung der Temperatur als Niederschlag ausfällt. In dieser Arbeit wurde ein alternatives Polymer, das poly(2-(2-methoxyethoxy)ethylmethacrylate-co-oligo(ethyleneglycol) methacrylate) (P(MEO2MA-co-OEGMA)), untersucht, in Bezug auf Biokompatibilität und der Änderung des Trübungspunktes in Wasser. Wenn eine Schicht eines temperaturempfindlichen Polymers auf einen Monolithen (einteiliger, poröser und auf Silika-basierendes Material) aufgebracht wird, werden die thermoresponsiven Eigenschaften auf die Oberfläche dieses Monolithen übertragen. Der Monolith dient hier als Säule in einer HPLC-Anlage. Es wurde gezeigt, dass das Hybrid-Material als einfacher „Temperaturschalter“ in der Trennung von fünf verschiedenen Steroiden in Wasser agieren kann. Untersucht wurde die Separation verschiedener Analyten mit dem Variieren der Säulentemperatur. Zusätzlich wurden mehr komplexe biochemische Stoffe, wie Proteine, getestet. Die Bedeutung dieser Arbeit ist zurückzuführen auf Separationsprozesse, welche umweltfreundlichen Bedingungen nutzen, da die rauen chemischen Bedingungen in konventionellen Separationsprozessen die biologische Inaktivität der Verbindungen zur Folge haben können. Der zweite Teil der Arbeit beschäftigte sich mit der Entwicklung eines alternativen Trägermaterials als Ersatz zu den Silika-basierende Trennungssäulen. Kohlenstoffmaterialien sind aufgrund ihrer ausgezeichneten mechanischen Härte und chemischen Stabilität eine vielversprechend Alternative. Die Synthese von Kohlenstoffkugeln als Trägermaterial kann als „grüner“ Prozess in meiner Arbeit angesehen werden, da milde Synthesebedingungen in purem Wasser verwendet wurden. Die Leistungsfähigkeit des Materials wurde mit einer Serie von Separationsreaktionen gezeigt. KW - thermoresponsive KW - poly(N-isopropylacrylamide) KW - oligo(ethyleneglycol) KW - Monolith KW - Chromatographie KW - thermoresponsive KW - poly(N-isopropyl acrylamide) KW - oligo(ethylene glycol) KW - monolith KW - chromatography Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-53130 ER - TY - THES A1 - Wichura, Henry T1 - Topographic evolution of the East African Plateau : a combined study on lava-flow modeling and paleo-topography T1 - Die topographische Entwicklung des Ostafrikanischen Plateaus : eine kombinierte Studie über Lavastrommodellierung und Paläotopographie N2 - The East African Plateau provides a spectacular example of geodynamic plateau uplift, active continental rifting, and associated climatic forcing. It is an integral part of the East African Rift System and has an average elevation of approximately 1,000 m. Its location coincides with a negative Bouguer gravity anomaly with a semi-circular shape, closely related to a mantle plume, which influences the Cenozoic crustal development since its impingement in Eocene-Oligocene time. The uplift of the East African Plateau, preceding volcanism, and rifting formed an important orographic barrier and tectonically controlled environment, which is profoundly influenced by climate driven processes. Its location within the equatorial realm supports recently proposed hypotheses, that topographic changes in this region must be considered as the dominant forcing factor influencing atmospheric circulation patterns and rainfall distribution. The uplift of this region has therefore often been associated with fundamental climatic and environmental changes in East Africa and adjacent regions. While the far-reaching influence of the plateau uplift is widely accepted, the timing and the magnitude of the uplift are ambiguous and are still subject to ongoing discussion. This dilemma stems from the lack of datable, geomorphically meaningful reference horizons that could record surface uplift. In order to quantify the amount of plateau uplift and to find evidence for the existence of significant relief along the East African Plateau prior to rifting, I analyzed and modeled one of the longest terrestrial lava flows; the 300-km-long Yatta phonolite flow in Kenya. This lava flow is 13.5 Ma old and originated in the region that now corresponds to the eastern rift shoulders. The phonolitic flow utilized an old riverbed that once drained the eastern flank of the plateau. Due to differential erosion this lava flow now forms a positive relief above the parallel-flowing Athi River, which is mimicking the course of the paleo-river. My approach is a lava-flow modeling, based on an improved composition and temperature dependent method to parameterize the flow of an arbitrary lava in a rectangular-shaped channel. The essential growth pattern is described by a one-dimensional model, in which Newtonian rheological flow advance is governed by the development of viscosity and/or velocity in the internal parts of the lava-flow front. Comparing assessments of different magma compositions reveal that length-dominated, channelized lava flows are characterized by high effusion rates, rapid emplacement under approximately isothermal conditions, and laminar flow. By integrating the Yatta lava flow dimensions and the covered paleo-topography (slope angle) into the model, I was able to determine the pre-rift topography of the East African Plateau. The modeling results yield a pre-rift slope of at least 0.2°, suggesting that the lava flow must have originated at a minimum elevation of 1,400 m. Hence, high topography in the region of the present-day Kenya Rift must have existed by at least 13.5 Ma. This inferred mid-Miocene uplift coincides with the two-step expansion of grasslands, as well as important radiation and speciation events in tropical Africa. Accordingly, the combination of my results regarding the Yatta lava flow emplacement history, its location, and its morphologic character, validates it as a suitable “paleo-tiltmeter” and has thus to be considered as an important topographic and volcanic feature for the topographic evolution in East Africa. N2 - Das Ostafrikanische Plateau ist ein eindrucksvolles Beispiel für aktive, kontinentale Grabenbildung, aber auch für geodynamische Hochebenenbildung mit weitreichendem klimatischen Einfluss auf die gesamte Region. Als integraler Bestandteil des Ostafrikanischen Grabensystems beläuft sich die mittlere Höhe des Plateaus auf durchschnittlich 1000 m ü.NN. Seine Lage korreliert gut mit der Präsenz einer halbkreisförmigen negativen Bouguer-Schwereanomalie, die an den Aufstieg eines Manteldiapirs im Untergrund gekoppelt ist. Dieser prägte die känozoische Krustenentwicklung seit seinem Aufstieg im Eozän-Oligozän. Die Hebungsgeschichte und topographische Entwicklung des Hochlandes steht seither in enger Beziehung zum einsetzenden Vulkanismus, der Bildung erster Abschiebungssysteme und führte schließlich zur Entwicklung des heutigen Vollgrabensystems. Neueste Hypothesen lassen den Schluss zu, dass topographische Veränderungen als dominierende Einflussgrößen atmosphärischer Zirkulationsmuster sowie der regionalen Niederschlagsverbreitung anzusehen sind. Zusätzlich werden diese Prozesse durch die äquatoriale Lage des Ostafrikanischen Plateaus verstärkt und die Hebung dieser Region oft mit wichtigen Klima- und Umweltveränderungen in Ostafrika und angrenzende Gebiete in Verbindung gebracht. Während der weitreichende klimatische Einfluss des Hochlandes größtenteils akzeptiert ist, sind Zeitpunkt und Ausmaß seiner Heraushebung nicht eindeutig bestimmt und daher noch immer Grundlage bestehender Diskussionen. Diese Zwangslage hat ihre Ursache im Fehlen aussagekräftiger und datierbarer Referenzhorizonte. Um den Hebungsbetrag zu quantifizieren und Beweise signifikanten Reliefs vor der Entwicklung des Grabensystems entlang des Ostafrikanischen Hochlandes zu erbringen, analysierte und modellierte ich einen der längsten terrestrischen Lavaströme. Dieser vor 13,5 Ma abgelagerte Yatta-Lavastrom hat mit 300 km Länge seinen Ursprung in der Region der heutigen östlichen Grabenschulter des zentralen Kenia-Rifts. Die phonolitische Lava ergoss sich entlang eines Flussbettes, das einst die östliche Flanke des Hochlandes entwässerte. Aufgrund unterschiedlicher Erosionspotentiale bildet der Lavastrom gegenwärtig ein positives Relief und befindet sich oberhalb des Athi Flusses, der parallel zum Paläofluß, und somit versetzt zu seinen früheren Verlauf, strömt. Mein Ansatz der Lavastrom-Modellierung basiert auf einer Methode, die das Fließverhalten einer beliebigen Lava in Abhängigkeit von Temperatur und Magmenzusammensetzung in einem rechtwinkligen Kanal berechnet. Die wesentlichen Wachstumsmuster des Lavastroms sind durch ein eindimensionales Modell beschrieben, wobei Newtonsches Fließverhalten im Innern hinter der Lavastromfront von der zeitlichen Entwicklung der Viskosität und/oder der Fließgeschwindigkeit bestimmt wird. Vergleiche meiner Resultate mit verschiedenen Magmenzusammensetzungen zeigen, dass sich lange, kanalisierte Lavaströme mit hohen Ergussraten und schneller Platznahme bilden können. Dies geschieht unter annähernd isothermalen Bedingungen und erfordert laminares Fließen. Die Integration der Yatta- Lavastrom-Dimensionen und der bedeckten Paläotopographie (Neigungswinkel) in das Modell, erlaubte es mir die Topographie des Ostafrikanischen Hochlandes vor der Grabenbildung zu modellieren. Das Ergebnis der Modellierung ergibt einen Neigungswinkel von mindestens 0,2° und impliziert, dass der Lavastrom seinen Ursprung in einer Höhe von mindestens 1400 m ü.NN gehabt haben muss. Somit existierte bereits vor 13,5 Ma hohe Topographie in der heutigen Region des zentralen Kenia-Rifts. Diese abgeleitete regionale Hebungsgeschichte im mittleren Miozän korreliert mit der zweistufigen Ausbreitung der Graslandschaften, sowie dem Aufkommen neuer Arten im tropischen Afrika. Die Kombination aus Fließverhalten, Entstehungsort und morphologischer Eigenschaften macht den Yatta-Lavastrom zu einem “Paläoneigungsmesser” und wichtigen vulkanischen Untersuchungsobjekt für die topographische Entwicklung in Ostafrika. KW - Ostafrika KW - Plateau KW - Paläotopographie KW - Miozän KW - Yatta KW - East African Plateau KW - paleo-topography KW - Miocene KW - Yatta Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-52363 ER - TY - THES A1 - Flores Suárez, Rosaura T1 - Three-dimensional polarization probing in polymer ferroelectrics, polymer-dispersed liquid crystals, and polymer ferroelectrets T1 - Dreidimensionale Polarisationsmessung in polymeren Ferroelektrika, polymerdispergierten Flüssigkristallen und polymeren Ferroelektreten N2 - A key non-destructive technique for analysis, optimization and developing of new functional materials such as sensors, transducers, electro-optical and memory devices is presented. The Thermal-Pulse Tomography (TPT) provides high-resolution three-dimensional images of electric field and polarization distribution in a material. This thermal technique use a pulsed heating by means of focused laser light which is absorbed by opaque electrodes. The diffusion of the heat causes changes in the sample geometry, generating a short-circuit current or change in surface potential, which contains information about the spatial distribution of electric dipoles or space charges. Afterwards, a reconstruction of the internal electric field and polarization distribution in the material is possible via Scale Transformation or Regularization methods. In this way, the TPT was used for the first time to image the inhomogeneous ferroelectric switching in polymer ferroelectric films (candidates to memory devices). The results shows the typical pinning of electric dipoles in the ferroelectric polymer under study and support the previous hypotheses of a ferroelectric reversal at a grain level via nucleation and growth. In order to obtain more information about the impact of the lateral and depth resolution of the thermal techniques, the TPT and its counterpart called Focused Laser Intensity Modulation Method (FLIMM) were implemented in ferroelectric films with grid-shaped electrodes. The results from both techniques, after the data analysis with different regularization and scale methods, are in total agreement. It was also revealed a possible overestimated lateral resolution of the FLIMM and highlights the TPT method as the most efficient and reliable thermal technique. After an improvement in the optics, the Thermal-Pulse Tomography method was implemented in polymer-dispersed liquid crystals (PDLCs) films, which are used in electro-optical applications. The results indicated a possible electrostatic interaction between the COH group in the liquid crystals and the fluorinate atoms of the used ferroelectric matrix. The geometrical parameters of the LC droplets were partially reproduced as they were compared with Scanning Electron Microscopy (SEM) images. For further applications, it is suggested the use of a non-strong-ferroelectric polymer matrix. In an effort to develop new polymerferroelectrets and for optimizing their properties, new multilayer systems were inspected. The results of the TPT method showed the non-uniformity of the internal electric-field distribution in the shaped-macrodipoles and thus suggested the instability of the sample. Further investigation on multilayers ferroelectrets was suggested and the implementation of less conductive polymers layers too. N2 - In dieser Arbeit wird eine zerstörungsfreie Technik zur Analyse, Optimierung, und Entwicklung neuer funktioneller Materialien für Sensoren, Wandler, Speicher und elektrooptische Anwendungen vorgestellt. Die Wärmepuls-Tomographie (engl. Thermal-Pulse Tomography, TPT) liefert dreidimensionale Abbildungen hoher Auflösung von elektrischen Feldern und Polarisationsverteilungen eines Materials. Bei dieser thermischen Methode wird ein fokussierter, gepulster Laserstrahl durch eine undurchsichtige Oberflächenelektrode absorbiert, welche sich dadurch aufheizt. Die einsetzende Wärmediffusion führt – aufgrund der Wärmeausdehnung des Materials – zu Änderungen der Probengeometrie, welche in pyroelektrischen Materialien einen Kurzschlussstrom oder eine Änderung des Oberflächenpotentials zur Folge hat. Diese wiederum enthalten wichtige Informationen über die räumliche Verteilung elektrischer Dipole und Raumladungen im untersuchten Material. Aus dem gemessenen Kurzsschlussstrom kann anschließend das interne elektrische Feld und die Polarisationsverteilung im Material mittels verschiedener Skalentransformations- und Regularisierungsmethoden rekonstruiert werden. Auf diese Weise ermöglichte die TPT-Methode erstmals die Darstellung inhomogener ferroelektrischer Schaltvorgänge in polymeren ferroelektrischen Filmen, welche mögliche Materialien für die Datenspeicherung sind. Die Ergebnisse zeigen eine typische Haftschicht im ferroelektrischen Polymer und unterstützen die Hypothese einer ferroelektrischen Umpolung auf einer der Korngröße äquivalenten Längenskala über Keimbildung und anschließendes Wachstum. Um die Lateral- und Tiefenauflösung zu untersuchen, wurden sowohl die TPT-Methode als auch die äquivalente Methode in der Zeitdomäne (Focused Laser Intensity Modulation Method, FLIMM) auf ferroelektrischen Filme mit Gitterelektroden angewendet. Die Ergebnisse beider Techniken zeigen nach der Datenauswertung mit unterschiedlichen Regularisierungs- und Scale-Methoden eine vollkommene Übereinstimmung. Des Weiteren stellte sich heraus, dass bisherige Untersuchungen der lateralen Auflösung von FLIMM diese möglicherweise überschätzen. Damit behauptet sich TPT als effiziente und verlässliche thermische Methode. Nach einer Optimierung der Optik wurde die TPT-Methode in polymerdispergierten Flüssigkristallen (polymer-dispersed liquid crystals, PDLC), welche in elektrooptischen Anwendungen von Interesse sind, angewendet. Die Ergebnisse deuten auf eine mögliche elektrostatischeWechselwirkung zwischen den COH-Gruppen des Flüssigkristalls und den Fluoratomen der verwendeten ferroelektrischen Matrix hin. Die durch rasterelektronenmikroskopische Aufnahmen (scanning electron microscopy, SEM) gewonnenen geometrischen Parameter der Flüssigkristalltröpfchen konnten mittels TPT reproduziert werden. Für weitere Anwendungen werden schwach ferroelektrische Polymermatrices vorgeschlagen. Im Bestreben neue polymere Ferroelektrete zu entwickeln und deren Eigenschaften zu optimieren, wurden neuartige Mehrschichtsysteme untersucht. Die Ergebnisse aus der TPT-Methode zeigen eine Abweichung der Uniformität der inneren Verteilung des elektrischen Feldes in den geformten Makrodipolen, was auf eine Instabilität der Probe hindeutet. Ebenfalls wurden weitere Untersuchungen an Mehrschicht-Ferroelektreten und die Anwendung von halbleitenden Polymerschichten vorgeschlagen. KW - Ferroelektrik KW - Ferroelektrete KW - Wärmepuls-Tomographie KW - Polarisationsverteilung KW - Flüssigkristalle KW - Polarization distribution KW - Ferroelectrics KW - PDLC KW - Ferroelectrets KW - Thermal-Pulse Tomography Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-60173 ER - TY - THES A1 - Kartal, Önder T1 - The role of interfacial and 'entropic' enzymes in transitory starch degradation : a mathematical modeling approach T1 - Zur Aufklärung der Rolle grenzflächenaktiver und "entropischer" Enzyme beim Abbau transitorischer Stärke auf Grundlage mathematischer Modelle N2 - Plants and some unicellular algae store carbon in the form of transitory starch on a diurnal basis. The turnover of this glucose polymer is tightly regulated and timely synthesis as well as mobilization is essential to provide energy for heterotrophic growth. Especially for starch degradation, novel enzymes and mechanisms have been proposed recently. However, the catalytic properties of these enzymes and their coordination with metabolic regulation are still to be discovered. This thesis develops theoretical methods in order to interpret and analyze enzymes and their role in starch degradation. In the first part, a novel description of interfacial enzyme catalysis is proposed. Since the initial steps of starch degradation involve reactions at the starch-stroma interface it is necessary to have a framework which allows the derivation of interfacial enzyme rate laws. A cornerstone of the method is the introduction of the available area function - a concept from surface physics - to describe the adsorption step in the catalytic cycle. The method is applied to derive rate laws for two hydrolases, the Beta-amylase (BAM3) and the Isoamylase (DBE/ISA3), as well as to the Glucan, water dikinase (GWD) and a Phosphoglucan phosphatase (DSP/SEX4). The second part uses the interfacial rate laws to formulate a kinetic model of starch degradation. It aims at reproducing the stimulatory effect of reversible phosphorylation by GWD and DSP on the breakdown of the granule. The model can describe the dynamics of interfacial properties during degradation and suggests that interfacial amylopectin side-chains undergo spontaneous helix-coil transitions. Reversible phosphorylation has a synergistic effect on glucan release especially in the early phase dropping off during degradation. Based on the model, the hypothesis is formulated that interfacial phosphorylation is important for the rapid switch from starch synthesis to starch degradation. The third part takes a broader perspective on carbohydrate-active enzymes (CAZymes) but is motivated by the organization of the downstream pathway of starch breakdown. This comprises Alpha-1,4-glucanotransferases (DPE1 and DPE2) and Alpha-glucan-phosphorylases (Pho or PHS) both in the stroma and in the cytosol. CAZymes accept many different substrates and catalyze numerous reactions and therefore cannot be characterized in classical enzymological terms. A concise characterization is provided by conceptually linking statistical thermodynamics and polymer biochemistry. Each reactant is interpreted as an energy level, transitions between which are constrained by the enzymatic mechanisms. Combinations of in vitro assays of polymer-active CAZymes essential for carbon metabolism in plants confirmed the dominance of entropic gradients. The principle of entropy maximization provides a generalization of the equilibrium constant. Stochastic simulations confirm the results and suggest that randomization of metabolites in the cytosolic pool of soluble heteroglycans (SHG) may contribute to a robust integration of fluctuating carbon fluxes coming from chloroplasts. N2 - Stärke hat eine herausragende Bedeutung für die menschliche Ernährung. Sie ist ein komplexes, wasserunlösliches Glucosepolymer und dient - als eine der wichtigsten Speicherformen von Kohlenhydraten in Pflanzen - der Aufrechterhaltung des Energiestoffwechsels. Unterschiedliche Organe enthalten Stärke. In Knollen und Samen wird die sogenannte Speicherstärke über lange Zeiträume auf- und abgebaut. Die im Allgemeinen weniger bekannte transitorische Stärke in Blättern und einigen einzelligen Algen wird in einem täglichen Rhythmus umgesetzt: Sie wird während der Photosynthese aufgebaut und in der Nacht abgebaut. Experimentelle Studien haben nachgewiesen, dass die Fähigkeit der Pflanze, den Abbau transitorischer Stärke zu regeln, essentiell ist, um während der Nacht das Wachstum der Pflanze zu gewährleisten. Da die Geschwindigkeit von biochemischen Reaktionen über Enzyme reguliert wird, ist die Aufklärung ihrer Funktion im Stoffwechsel eine notwendige Voraussetzung, um den komplexen Prozess des Wachstums zu erklären. Die vorliegende Arbeit stellt einen Versuch dar, die Funktion von Enzymen beim Stärkeabbau anhand von mathematischen Modellen und Computersimulationen besser zu verstehen. Dieser Ansatz erlaubt es, Eigenschaften des Systems durch Abstraktion anhand eines idealisierten Abbildes herzuleiten. Die mathematisch notwendigen Folgerungen dienen der Aufstellung von Hypothesen, die wiederum mit experimentellen Resultaten konfrontiert werden können. Stoffwechselsysteme sind komplexe Untersuchungsobjekte, bei denen eine rein qualitative Argumentation schnell an Grenzen gerät, wo mathematische Methoden die Möglichkeit von Aussagen noch zulassen. Der erste Teil der Arbeit entwickelt einen theoretischen Rahmen, um Gleichungen für die Geschwindigkeit oberflächenaktiver Enzyme herzuleiten. Dies ist notwendig, da die ersten Reaktionen, die dem Stärkeabbau zugeordnet werden, an ihrer Oberfläche stattfinden. Die Methode wird auf vier essentielle Enzyme angewandt: zwei abbauende Enzyme (Beta-Amylase und Isoamylase) und zwei den Abbau unterstützende Enzyme (Alpha-Glucan,Wasser-Dikinase und Phosphoglucan Phosphatase). Der zweite Teil entwickelt ein kinetisches Modell des Stärkeabbaus unter Verwendung der hergeleiteten Ratengleichungen. Das Modell bildet die Dynamik des Systems realistisch ab und legt nahe, dass ein spontaner Phasenübergang an der Oberfläche von geordneten zu weniger geordneten Zuständen stattfindet. Ferner wird die Hypothese aufgestellt, dass die reversible Modifikation der Oberfläche durch Enzyme besonders in der Anfangsphase des Abbaus einen synergetischen Effekt hat, d.h. den Abbau enorm beschleunigt. Dies könnte beim schnellen Umschalten von Stärkeaufbau zu Stärkeabbau regulatorisch relevant sein. Im letzten Teil werden kohlenhydrataktive Enzyme betrachtet, die in der löslichen Phase die Produkte des Stärkeabbaus weiterverarbeiten. Da diese sogenannten Transferasen auch in vielen anderen Organismen und Stoffwechselwegen vorkommen, wird ein allgemeiner Standpunkt eingenommen. Anhand von Methoden aus der statistischen Physik wird theoretisch wie experimentell nachgewiesen, dass diese Enzyme spontan die Entropie innerhalb des Stoffwechselsystems erhöhen. Diese Neigung, "Unordnung" zu schaffen, wird vom Organismus aber paradoxerweise ausgenutzt, um die Weiterverarbeitung von Kohlenhydraten im Stärkestoffwechsel zu stabilisieren. Dieser Mechanismus eröffnet einen neuen Blick auf energie- und entropiegetriebene Prozesse in Zellen. KW - Enzymkinetik KW - Enzymadsorption KW - Disproportionierungsenzym KW - Polysaccharide KW - Statistische Physik KW - Enzyme kinetics KW - Enzyme adsorption KW - Disproportionating Enzyme KW - Polysaccharides KW - Statistical Physics Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-53947 ER - TY - THES A1 - Husemann, Bernd T1 - The AGN-host galaxy connection : new insights from the extended ionised gas T1 - Die AGN-Galaxien Verbindung : neue Erkenntnisse durch das ausgedehnte ionisierte Gas N2 - Active Galactic Nuclei (AGN) are powered by gas accretion onto supermassive Black Holes (BH). The luminosity of AGN can exceed the integrated luminosity of their host galaxies by orders of magnitude, which are then classified as Quasi-Stellar Objects (QSOs). Some mechanisms are needed to trigger the nuclear activity in galaxies and to feed the nuclei with gas. Among several possibilities, such as gravitational interactions, bar instabilities, and smooth gas accretion from the environment, the dominant process has yet to be identified. Feedback from AGN may be important an important ingredient of the evolution of galaxies. However, the details of this coupling between AGN and their host galaxies remain unclear. In this work we aim to investigate the connection between the AGN and their host galaxies by studying the properties of the extendend ionised gas around AGN. Our study is based on observations of ~50 luminous, low-redshift (z<0.3) QSOs using the novel technique of integral field spectroscopy that combines imaging and spectroscopy. After spatially separating the emission of AGN-ionised gas from HII regions, ionised solely by recently formed massive stars, we demonstrate that the specific star formation rates in several disc-dominated AGN hosts are consistent with those of normal star forming galaxies, while others display no detectable star formation activity. Whether the star formation has been actively suppressed in those particular host galaxies by the AGN, or their gas content is intrinsically low, remains an open question. By studying the kinematics of the ionised gas, we find evidence for non-gravitational motions and outflows on kpc scales only in a few objects. The gas kinematics in the majority of objects however indicate a gravitational origin. It suggests that the importance of AGN feedback may have been overrated in theoretical works, at least at low redshifts. The [OIII] line is the strongest optical emission line for AGN-ionised gas, which can be extended over several kpc scales, usually called the Narrow-Line Region (NLR). We perform a systematic investigation of the NLR size and determine a NLR size-luminosity relation that is consistent with the scenario of a constant ionisation parameter throughout the NLR. We show that previous narrow-band imaging with the Hubble Space Telescope underestimated the NLR size by a factor of >2 and that the continuum AGN luminosity is better correlated with the NLR size than the [OIII] luminosity. These affects may account for the different NLR size-luminosity relations reported in previous studies. On the other hand, we do not detect extended NLRs around all QSOs, and demonstrate that the detection of extended NLRs goes along with radio emission. We employ emission line ratios as a diagnostic for the abundance of heavy elements in the gas, i.e. its metallicity, and find that the radial metallicity gradients are always flatter than in inactive disc-dominated galaxies. This can be interpreted as evidence for radial gas flows from the outskirts of these galaxies to the nucleus. Recent or ongoing galaxy interactions are likely responsible for this effect and may turn out to be a common prerequisite for QSO activity. The metallicity of bulge-dominated hosts are systematically lower than their disc-dominated counterparts, which we interpret as evidence for minor mergers, supported by our detailed study of the bulge-dominated host of the luminous QSO HE 1029-1401, or smooth gas accretion from the environment. In this line another new discovery is that HE 2158-0107 at z=0.218 is the most metal poor luminous QSO ever observed. Together with a large (30kpc) extended structure of low metallicity ionised gas, we propose smooth cold gas accretion as the most likely scenario. Theoretical studies suggested that this process is much more important at earlier epochs of the universe, so that HE 2158-0107 might be an ideal laboratory to study this mechanism of galaxy and BH growth at low redshift more detailed in the furture. N2 - Aktive Galaxienkerne (AGN) entstehen durch die Akkretion von Gas auf massive Schwarze Löcher, welche im Zentrum jeder Galaxie mit einer spherodialen Komponente vermutet werden. Die Leuchtkraft eines AGN kann die seiner gesamten Muttergalaxie um Größenordnungen übersteigen. In diesem Fall werden AGN oft als Quasi-Stellare Objekte (Quasare) bezeichnet. Spezielle Mechanismen müssen für das Auslösen dieser Kernaktivität in Galaxien verantwortlich sein. Verschiedene Prozesse wurden bereits identifiziert, aber der entscheidende Mechanismus wurde bisher noch nicht entdeckt. Die Wechselwirkung mit einem AGN könnte außerdem einen entscheidenden Einfluss auf die Entwicklung von Galaxien haben. Es ist noch unklar wie diese Wechselwirkung genau abläuft und ob es die Sternentstehung in Galaxien beeinflusst. In dieser Arbeit studieren wir die Eigenschaften des ausgedehnten ionisierten Gases in AGN-Muttergalaxien, um mögliche Wechselwirkungen zu untersuchen. Wir benutzen dazu eine Stichprobe von ~50 Quasaren bei geringer Rotverschiebung (z<0.3), die mit der neuartigen Technik der Integralfeld-Spektroskopie beobachtet wurden. Diese Technik kombiniert bildgebende und spektroskopische Verfahren. Wir können mit unserer Analyse zeigen, dass die spezifische Sternentstehungsrate in einigen Scheiben-dominierten AGN-Muttergalaxien vergleichbar mit denen von normalen Galaxien ohne Kernaktivität ist. Allerdings können wir in einigen AGN-Muttergalaxien keine Anzeichen von Sternentstehung feststellen. Ob Sternentstehung in diesen Galaxien momentan durch die Wechselwirkung mit dem AGN unterdrückt wird, ist daher nicht eindeutig. Hinweise auf Gasausflüsse liefert die Kinematik des ionisierten Gases für einige wenige Objekte, doch die Kinematik für die meisten AGN-Muttergalaxien kann allein durch das Wirken der Gravitation erklärt werden. Daraus schließen wir, dass der Einfluss von AGN auf ihre Muttergalaxien geringer sein könnte als theoretisch angenommen wird. Die [OIII] Emissionslinie ist die stärkste optische Linie für AGN-ionisiertes Gas und kann sich über eine Region von mehreren kpc vom Kern erstrecken, die als "Narrow-Line Region" (NLR) bezeichnet wird. Durch eine systematische Untersuchung der NLR-Ausdehnung können wir eine Beziehung zwischen NLR-Radius und AGN-Leuchtkraft bestimmen. Diese Relation ist konsistent mit einem konstanten Ionisationsparameter über die gesamte Ausdehnung der NLR. Frühere Studien mit dem Hubble Weltraumteleskop unterschätzten die Größe der NLR um mehr als einen Faktor 2. Andererseits können wir nicht für alle Quasare eine ausgedehnte NLR nachweisen, wobei eine NLR-Detektion bei einer höheren Radioleuchtkraft des Quasars wahrscheinlicher ist. Dies deutet auf eine Wechselwirkung eines Radio-Jets mit dem kernumgebenden Gas hin. Wir benutzen Emissionslinien des ionisierten Gases, um den Anteil von schweren Elementen im Gas, die so genannte Metallizität, zu bestimmen. Dabei finden wir, dass die radialen Metallizitätsgradienten in Scheiben-dominierten AGN-Muttergalaxien deutlich flacher sind als in vergleichbaren Galaxien ohne Kernaktivität, was wir als Anzeichen für radialen Gastransport vom Rand der Galaxien zum Kern interpretieren. Dies könnte durch kürzliche oder immer noch andauernde gravitative Wechselwirkungen zwischen Nachbargalaxien entstanden sein und stellt eventuell eine Voraussetzung für Kernaktivität dar. Sehr interessant ist unser Ergebnis, dass die ellptischen AGN-Muttergalaxien eine geringere Metallizität aufweisen als die Spiralgalaxien. Dies könnte z.B. durch das Verschmelzen mit kleinen Nachbargalaxien induziert werden, welche eine intrinsisch geringe Metallizität aufweisen. Am Beispiel der elliptischen Muttergalaxie des Quasars HE 1029-1401 können wir durch eine detaillierte Analyse des ionisierten Gases verschiedene Indizien für einen solchen Prozess nachweisen. Eine weiteres Resultat dieser Arbeit ist die Entdeckung eines leuchtkräftigen Quasars mit der geringsten Metallizität, die bisher für solche Objekte nachgewiesen werden konnte. Wir interpretieren die geringe Metallizität und die Ausdehnung des ionisierten Gases über 30kpc als deutliche Indizien für die Akkretion von intergalaktischem Gas. Dieser Prozess findet viel häufiger im frühen Universum statt. HE 2158-0107 könnte daher ein ideales Objekt sein, um diesen Prozess im nahen Universum detaillierter studieren zu können. KW - Quasare KW - Integralfeld-Spectroskopie KW - Galaxien KW - Interstellares Medium KW - Quasars KW - Integral field spectroscopy KW - Galaxies KW - Interstellar medium Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-55556 ER - TY - THES A1 - Lorenz, Haik T1 - Texturierung und Visualisierung virtueller 3D-Stadtmodelle T1 - Texturing and Visualization of Virtual 3D City Models N2 - Im Mittelpunkt dieser Arbeit stehen virtuelle 3D-Stadtmodelle, die Objekte, Phänomene und Prozesse in urbanen Räumen in digitaler Form repräsentieren. Sie haben sich zu einem Kernthema von Geoinformationssystemen entwickelt und bilden einen zentralen Bestandteil geovirtueller 3D-Welten. Virtuelle 3D-Stadtmodelle finden nicht nur Verwendung als Mittel für Experten in Bereichen wie Stadtplanung, Funknetzplanung, oder Lärmanalyse, sondern auch für allgemeine Nutzer, die realitätsnah dargestellte virtuelle Städte in Bereichen wie Bürgerbeteiligung, Tourismus oder Unterhaltung nutzen und z. B. in Anwendungen wie GoogleEarth eine räumliche Umgebung intuitiv erkunden und durch eigene 3D-Modelle oder zusätzliche Informationen erweitern. Die Erzeugung und Darstellung virtueller 3D-Stadtmodelle besteht aus einer Vielzahl von Prozessschritten, von denen in der vorliegenden Arbeit zwei näher betrachtet werden: Texturierung und Visualisierung. Im Bereich der Texturierung werden Konzepte und Verfahren zur automatischen Ableitung von Fototexturen aus georeferenzierten Schrägluftbildern sowie zur Speicherung oberflächengebundener Daten in virtuellen 3D-Stadtmodellen entwickelt. Im Bereich der Visualisierung werden Konzepte und Verfahren für die multiperspektivische Darstellung sowie für die hochqualitative Darstellung nichtlinearer Projektionen virtueller 3D-Stadtmodelle in interaktiven Systemen vorgestellt. Die automatische Ableitung von Fototexturen aus georeferenzierten Schrägluftbildern ermöglicht die Veredelung vorliegender virtueller 3D-Stadtmodelle. Schrägluftbilder bieten sich zur Texturierung an, da sie einen Großteil der Oberflächen einer Stadt, insbesondere Gebäudefassaden, mit hoher Redundanz erfassen. Das Verfahren extrahiert aus dem verfügbaren Bildmaterial alle Ansichten einer Oberfläche und fügt diese pixelpräzise zu einer Textur zusammen. Durch Anwendung auf alle Oberflächen wird das virtuelle 3D-Stadtmodell flächendeckend texturiert. Der beschriebene Ansatz wurde am Beispiel des offiziellen Berliner 3D-Stadtmodells sowie der in GoogleEarth integrierten Innenstadt von München erprobt. Die Speicherung oberflächengebundener Daten, zu denen auch Texturen zählen, wurde im Kontext von CityGML, einem international standardisierten Datenmodell und Austauschformat für virtuelle 3D-Stadtmodelle, untersucht. Es wird ein Datenmodell auf Basis computergrafischer Konzepte entworfen und in den CityGML-Standard integriert. Dieses Datenmodell richtet sich dabei an praktischen Anwendungsfällen aus und lässt sich domänenübergreifend verwenden. Die interaktive multiperspektivische Darstellung virtueller 3D-Stadtmodelle ergänzt die gewohnte perspektivische Darstellung nahtlos um eine zweite Perspektive mit dem Ziel, den Informationsgehalt der Darstellung zu erhöhen. Diese Art der Darstellung ist durch die Panoramakarten von H. C. Berann inspiriert; Hauptproblem ist die Übertragung des multiperspektivischen Prinzips auf ein interaktives System. Die Arbeit stellt eine technische Umsetzung dieser Darstellung für 3D-Grafikhardware vor und demonstriert die Erweiterung von Vogel- und Fußgängerperspektive. Die hochqualitative Darstellung nichtlinearer Projektionen beschreibt deren Umsetzung auf 3D-Grafikhardware, wobei neben der Bildwiederholrate die Bildqualität das wesentliche Entwicklungskriterium ist. Insbesondere erlauben die beiden vorgestellten Verfahren, dynamische Geometrieverfeinerung und stückweise perspektivische Projektionen, die uneingeschränkte Nutzung aller hardwareseitig verfügbaren, qualitätssteigernden Funktionen wie z.~B. Bildraumgradienten oder anisotroper Texturfilterung. Beide Verfahren sind generisch und unterstützen verschiedene Projektionstypen. Sie ermöglichen die anpassungsfreie Verwendung gängiger computergrafischer Effekte wie Stilisierungsverfahren oder prozeduraler Texturen für nichtlineare Projektionen bei optimaler Bildqualität. Die vorliegende Arbeit beschreibt wesentliche Technologien für die Verarbeitung virtueller 3D-Stadtmodelle: Zum einen lassen sich mit den Ergebnissen der Arbeit Texturen für virtuelle 3D-Stadtmodelle automatisiert herstellen und als eigenständige Attribute in das virtuelle 3D-Stadtmodell einfügen. Somit trägt diese Arbeit dazu bei, die Herstellung und Fortführung texturierter virtueller 3D-Stadtmodelle zu verbessern. Zum anderen zeigt die Arbeit Varianten und technische Lösungen für neuartige Projektionstypen für virtueller 3D-Stadtmodelle in interaktiven Visualisierungen. Solche nichtlinearen Projektionen stellen Schlüsselbausteine dar, um neuartige Benutzungsschnittstellen für und Interaktionsformen mit virtuellen 3D-Stadtmodellen zu ermöglichen, insbesondere für mobile Geräte und immersive Umgebungen. N2 - This thesis concentrates on virtual 3D city models that digitally encode objects, phenomena, and processes in urban environments. Such models have become core elements of geographic information systems and constitute a major component of geovirtual 3D worlds. Expert users make use of virtual 3D city models in various application domains, such as urban planning, radio-network planning, and noise immision simulation. Regular users utilize virtual 3D city models in domains, such as tourism, and entertainment. They intuitively explore photorealistic virtual 3D city models through mainstream applications such as GoogleEarth, which additionally enable users to extend virtual 3D city models by custom 3D models and supplemental information. Creation and rendering of virtual 3D city models comprise a large number of processes, from which texturing and visualization are in the focus of this thesis. In the area of texturing, this thesis presents concepts and techniques for automatic derivation of photo textures from georeferenced oblique aerial imagery and a concept for the integration of surface-bound data into virtual 3D city model datasets. In the area of visualization, this thesis presents concepts and techniques for multiperspective views and for high-quality rendering of nonlinearly projected virtual 3D city models in interactive systems. The automatic derivation of photo textures from georeferenced oblique aerial imagery is a refinement process for a given virtual 3D city model. Our approach uses oblique aerial imagery, since it provides a citywide highly redundant coverage of surfaces, particularly building facades. From this imagery, our approach extracts all views of a given surface and creates a photo texture by selecting the best view on a pixel level. By processing all surfaces, the virtual 3D city model becomes completely textured. This approach has been tested for the official 3D city model of Berlin and the model of the inner city of Munich accessible in GoogleEarth. The integration of surface-bound data, which include textures, into virtual 3D city model datasets has been performed in the context of CityGML, an international standard for the exchange and storage of virtual 3D city models. We derive a data model from a set of use cases and integrate it into the CityGML standard. The data model uses well-known concepts from computer graphics for data representation. Interactive multiperspective views of virtual 3D city models seamlessly supplement a regular perspective view with a second perspective. Such a construction is inspired by panorama maps by H. C. Berann and aims at increasing the amount of information in the image. Key aspect is the construction's use in an interactive system. This thesis presents an approach to create multiperspective views on 3D graphics hardware and exemplifies the extension of bird's eye and pedestrian views. High-quality rendering of nonlinearly projected virtual 3D city models focuses on the implementation of nonlinear projections on 3D graphics hardware. The developed concepts and techniques focus on high image quality. This thesis presents two such concepts, namely dynamic mesh refinement and piecewise perspective projections, which both enable the use of all graphics hardware features, such as screen space gradients and anisotropic texture filtering under nonlinear projections. Both concepts are generic and customizable towards specific projections. They enable the use of common computer graphics effects, such as stylization effects or procedural textures, for nonlinear projections at optimal image quality and interactive frame rates. This thesis comprises essential techniques for virtual 3D city model processing. First, the results of this thesis enable automated creation of textures for and their integration as individual attributes into virtual 3D city models. Hence, this thesis contributes to an improved creation and continuation of textured virtual 3D city models. Furthermore, the results provide novel approaches to and technical solutions for projecting virtual 3D city models in interactive visualizations. Such nonlinear projections are key components of novel user interfaces and interaction techniques for virtual 3D city models, particularly on mobile devices and in immersive environments. KW - Computergrafik KW - virtuelle 3D-Stadtmodelle KW - CityGML KW - nichtlineare Projektionen KW - Texturen KW - computer graphics KW - virtual 3D city models KW - CityGML KW - nonlinear projections KW - textures Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-53879 ER - TY - THES A1 - Federico, Stefania T1 - Synthetic peptides derived from decorin as building blocks for biomaterials based on supramolecular interactions T1 - Synthetische Peptide Basierend auf Decorin als Bausteine für Supramolekulare Biomaterialien N2 - In this work, the development of a new molecular building block, based on synthetic peptides derived from decorin, is presented. These peptides represent a promising basis for the design of polymer-based biomaterials that mimic the ECM on a molecular level and exploit specific biological recognition for technical applications. Multiple sequence alignments of the internal repeats of decorin that formed the inner and outer surface of the arch-shaped protein were used to develop consensus sequences. These sequences contained conserved sequence motifs that are likely to be related to structural and functional features of the protein. Peptides representative for the consensus sequences were synthesized by microwave-assisted solid phase peptide synthesis and purified by RP-HPLC, with purities higher than 95 mol%. After confirming the desired masses by MALDI-TOF-MS, the primary structure of each peptide was investigated by 1H and 2D NMR, from which a full assignment of the chemical shifts was obtained. The characterization of the peptides conformation in solution was performed by CD spectroscopy, which demonstrated that using TFE, the peptides from the outer surface of decorin show a high propensity to fold into helical structures as observed in the original protein. To the contrary, the peptides from the inner surface did not show propensity to form stable secondary structure. The investigation of the binding capability of the peptides to Collagen I was performed by surface plasmon resonance analyses, from which all but one of the peptides representing the inner surface of decorin showed binding affinity to collagen with values of dissociation constant between 2•10-7 M and 2.3•10-4 M. On the other hand, the peptides representative for the outer surface of decorin did not show any significant interaction to collagen. This information was then used to develop experimental demonstration for the binding capabilities of the peptides from the inner surface of decorin to collagen even when used in more complicated situations close to possible appications. With this purpose, the peptide (LRELHLNNN) which showed the highest binding affinity to collagen (2•10-7 M) was functionalized with an N-terminal triple bond in order to obtain a peptide dimer via copper(I)-catalyzed cycloaddition reaction with 4,4'-diazidostilbene-2,2'-disulfonic acid. Rheological measurements showed that the presence of the peptide dimer was able to enhance the elastic modulus (G') of a collagen gel from ~ 600 Pa (collagen alone) to ~ 2700 Pa (collagen and peptide dimer). Moreover, it was shown that the mechanical properties of a collagen gel can be tailored by using different molar ratios of peptide dimer respect to collagen. The same peptide, functionalized with the triple bond, was used to obtain a peptide-dye conjugate by coupling it with N-(5'-azidopentanoyl)-5-aminofluorescein. An aqueous solution (5 vol% methanol) of the peptide dye conjugate was injected into a collagen and a hyaluronic acid (HA) gel and images of fluorescence detection showed that the diffusion of the peptide was slower in the collagen gel compared to the HA gel. The third experimental demonstration was gained using the peptide (LSELRLHNN) which showed the lower binding affinity (2.3•10-4 M) to collagen. This peptide was grafted to hyaluronic acid via EDC-chemistry, with a degree of functionalization of 7 ± 2 mol% as calculated by 1H-NMR. The grafting was further confirmed by FTIR and TGA measurements, which showed that the onset of decomposition for the HA-g-peptide decreased by 10 °C compared to the native HA. Rheological measurements showed that the elastic modulus of a system based on collagen and HA-g-peptide increased by almost two order of magnitude (G' = 200 Pa) compared to a system based on collagen and HA (G' = 0.9 Pa). Overall, this study showed that the synthetic peptides, which were identified from decorin, can be applied as potential building blocks for biomimetic materials that function via biological recognition. N2 - In dieser Arbeit wird das Design, die Synthese und Analyse neuer molekularer Bausteine für Biomaterialien basierend auf synthetischen, von Decorin abgeleiteten Peptiden beschrieben. Diese Peptide sind deshalb als Baustein für polymer-basierte Biomaterialien von besonderem Interesse, da sie die extrazelluläre Matrix (ECM) auf molekularer Ebene nachempfinden und spezifische, biologische wichtige Interaktionen für technische Anwendungen nutzbar machen. Das Alignment multipler Sequenzen der internen Repeats von Decorin, die jeweils die innere bzw. äußere Seite des sichelförmigen Decorins bilden, wurde genutzt, um Konsensus-Sequenzen zu definieren. Diese Sequenzen beinhalten stark konservierte Sequenzmotive, die wahrscheinlich wichtig für Struktur und Funktion des Proteins sind. Ausgewählte Peptide, die repräsentativ für die Konsensus-Sequenzen sind, wurden dann mittels Mikrowellen unterstützter Festphasensynthese synthetisiert und mit RP-HPLC aufgereinigt, so dass Peptide mit Reinheiten ≥ 95 mol% erhalten wurden. Die Peptide wurden per MALDI-TOF-MS sowie 1D und 2D NMR Spektroskopie charakterisiert, wobei die Zuordnung der chemischen Verschiebungen zu einzelnen Protonen und Kohlenstoffen aus den 2D NMR Experimenten erfolgte. In Lösung wurden die Peptide zudem mit CD Spektroskopie untersucht, wobei gezeigt werden konnte, dass nur Peptide, die von der äußeren Seite des Decorins abgeleitet wurden, sich durch Zugabe von 2,2,2-Trifluorethanol zu α-Helices falten. Diese Faltung ist auch in der Röntgenstruktur bei den korrespondierenden Abschnitten zu finden. Im Gegensatz dazu zeigten Peptide, die von der inneren Seite des Decorins abgeleitet wurden, keine stabilen Sekundärstrukturen in Lösung (β-Faltblattstruktur in der Röntgenstruktur). Bindungsstudien der Peptide zu Kollagen I wurden mit Oberflächenplasmonenresonanz durchgeführt, wobei gezeigt werden konnte, dass alle bis auf ein Peptid, die von der innneren Seite abgeleitet wurden, an Kollagen mit Dissoziationskonstanten von 2•10-7 M bis 2.3•10-4 M binden, während Peptide, die für die äußere Seite von Decorin repräsentativ sind, keine Bindung an Kollagen I zeigten. Diese Information wurde genutzt, um experimentelle Demonstrationsobjekte dieser Interaktion in komplexeren, einer späteren Anwendung näheren Situation, zu entwickeln. Dazu wurde das Peptide LRELHLNNN, welches die stärkste Bindung zu Kollagen I zeigte (KD = 2•10-7 M), N-terminal mit einer Alkinbindung funktionalisiert, so dass durch Kupfer (I) katalysierte Reaktion mit 4,4'-Diazidostilben-2,2'-disulfonsäure ein Peptid-Dimer erhalten werden konnte. Rheologische Untersuchungen zeigten, dass durch Zugabe des Peptid-Dimers der Elastizitätsmodul G' von Kollagen-Gelen von ~ 600 Pa (nur Kollagen) auf ~ 2700 Pa (Kollagen und Peptide-Dimer) gesteigert werden konnte. Darüber hinaus konnte gezeigt werden, dass die Veränderung der mechanischen Eigenschaften der Gele durch Veränderung des Kollagen:Peptid-Dimer Verhältnisses angepasst werden konnten. Das gleiche, mit einer Alkin-Bindung funktionaliserte Peptid wurde dann zur Darstellung eines Peptid-Fluorescein Konjugats genutzt, indem es mit N-(5'-azidopentanoyl)-5-aminofluorescein umgesetzt wurde. Eine wässrige Lösung des Peptid-Farbstoff-Konjugats wurde dann in Kollagen- bzw. Hyaluronsäuregele injiziert. Die Diffusion des Peptid-Farbstoff-Konjugats war in Kollagengelen im Vergleich zu Hyaluronsäuregelen deutlich verlangsamt. Das dritte Demonstrationsobjekt wurde erhalten, indem das Peptid LSELRLHNN, welches die geringste Bindung an Kollagen zeigte (KD = 2.3•10-4 M), auf Hyaluronsäure (HA) gegrafted wurde. Die Reaktion wurde durch Carbodiimid-mediierte Kupplung erreicht, und ein Funktionalisierungsgrad von 7 ± 2 mol% wurde durch Integration der 1H-NMR Spektren bestimmt. Das erfolgreiche Grafting wurde durch FTIR- und TGA-Untersuchungen bestätigt. In letzteren wurde gezeigt, dass der thermische Abbau durch das Grafting bei etwas niedrigeren Temperaturen beginnt als der Abbau reiner Hyaluronsäure (ΔT = 10 °C). Rheologische Untersuchungen zeigten, dass ein System aus Kollagen und HA-g-Peptid ein um zwei Größenordnungen höheren Elastizitätsmodul G' hat (G' = 200 Pa) als Systeme, die aus einer physikalischen Mischung von Kollagen und HA bestehen (G' = 0.9 Pa). Zusammenfassend konnte gezeigt werden, dass die Peptide, die von Decorin abgeleitet wurden, als Kollagen-bindende Bausteine für biomimetische Materialien genutzt werden können. KW - Decorin KW - Peptide KW - Supramolekularen Wechselwirkungen KW - Kollagen KW - Physikalische Vernetzung KW - Decorin KW - Peptides KW - Supramolecular Interactions KW - Collagen KW - Physical Crosslinking Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-59661 ER - TY - THES A1 - Weiß, Jan T1 - Synthesis and self-assembly of multiple thermoresponsive amphiphilic block copolymers T1 - Synthese und Selbstorganisation von mehrfach thermisch schaltbaren amphiphilen Blockcopolymeren N2 - In the present thesis, the self-assembly of multi thermoresponsive block copolymers in dilute aqueous solution was investigated by a combination of turbidimetry, dynamic light scattering, TEM measurements, NMR as well as fluorescence spectroscopy. The successive conversion of such block copolymers from a hydrophilic into a hydrophobic state includes intermediate amphiphilic states with a variable hydrophilic-to-lipophilic balance. As a result, the self-organization is not following an all-or-none principle but a multistep aggregation in dilute solution was observed. The synthesis of double thermoresponsive diblock copolymers as well as triple thermoresponsive triblock copolymers was realized using twofold-TMS labeled RAFT agents which provide direct information about the average molar mass as well as residual end group functionality from a routine proton NMR spectrum. First a set of double thermosensitive diblock copolymers poly(N-n-propylacrylamide)-b-poly(N-ethylacrylamide) was synthesized which differed only in the relative size of the two blocks. Depending on the relative block lengths, different aggregation pathways were found. Furthermore, the complementary TMS-labeled end groups served as NMR-probes for the self-assembly of these diblock copolymers in dilute solution. Reversible, temperature sensitive peak splitting of the TMS-signals in NMR spectroscopy was indicative for the formation of mixed star-/flower-like micelles in some cases. Moreover, triple thermoresponsive triblock copolymers from poly(N-n-propylacrylamide) (A), poly(methoxydiethylene glycol acrylate) (B) and poly(N-ethylacrylamide) (C) were obtained from sequential RAFT polymerization in all possible block sequences (ABC, BAC, ACB). Their self-organization behavior in dilute aqueous solution was found to be rather complex and dependent on the positioning of the different blocks within the terpolymers. Especially the localization of the low-LCST block (A) had a large influence on the aggregation behavior. Above the first cloud point, aggregates were only observed when the A block was located at one terminus. Once placed in the middle, unimolecular micelles were observed which showed aggregation only above the second phase transition temperature of the B block. Carrier abilities of such triple thermosensitive triblock copolymers tested in fluorescence spectroscopy, using the solvatochromic dye Nile Red, suggested that the hydrophobic probe is less efficiently incorporated by the polymer with the BAC sequence as compared to ABC or ACB polymers above the first phase transition temperature. In addition, due to the problem of increasing loss of end group functionality during the subsequent polymerization steps, a novel concept for the one-step synthesis of multi thermoresponsive block copolymers was developed. This allowed to synthesize double thermoresponsive di- and triblock copolymers in a single polymerization step. The copolymerization of different N-substituted maleimides with a thermosensitive styrene derivative (4-vinylbenzyl methoxytetrakis(oxyethylene) ether) led to alternating copolymers with variable LCST. Consequently, an excess of this styrene-based monomer allowed the synthesis of double thermoresponsive tapered block copolymers in a single polymerization step. N2 - Die Selbstorganisation von mehrfach thermisch schaltbaren Blockcopolymeren in verdünnter wässriger Lösung wurde mittels Trübungsphotometer, dynamischer Lichtstreuung, TEM Messungen, NMR sowie Fluoreszenzspektroskopie untersucht. Die schrittweise Überführung eines hydrophilen in ein hydrophobes Blockcopolymer beinhaltet ein oder mehr amphiphile Zwischenstufen mit einstellbarem hydrophilen zu lipophilen Anteil (HLB). Dies führt dazu, dass die Selbstorganisation solcher Polymere in Lösung nicht nur einem Alles-oder-nichts-Prinzip folgt sondern ein mehrstufiges Aggregationsverhalten beobachtet wird. Die Synthese von doppelt thermisch schaltbaren Diblockcopolymeren und dreifach thermisch schaltbaren Triblockcopolymeren wurde durch sequenzielle RAFT Polymerisation realisiert. Dazu wurden zweifach TMS-markierte RAFT Agentien verwendet, welche die Bestimmung der molaren Masse sowie der verbliebenen Endgruppenfunktionalität direkt aus einem Protonen NMR Spektrum erlauben. Mit diesen RAFT Agentien wurde zunächst eine Serie von doppelt thermisch schaltbaren Diblockcopolymeren aus Poly(N-n-propylacrylamid)-b-Poly(N-ethylacrylamid), welche sich lediglich durch die relativen Blocklängen unterscheiden, hergestellt. In Abhängigkeit von der relativen Blocklänge wurde ein unterschiedliches Aggregationsverhalten der Diblockcopolymere in verdünnter wässriger Lösung beobachtet. Des Weiteren wirken die komplementär TMS-markierten Endgruppen als NMR-Sonden während der schrittweisen Aggregation dieser Polymere. Reversible, temperaturabhängige Peakaufspaltung der TMS-Signale in der NMR Spektroskopie spricht für eine Aggregation in gemischte stern-/blumenartige Mizellen, in denen ein Teil der hydrophoben Endgruppen in den hyrophoben Kern zurückfaltet. Obendrein wurden dreifach thermisch schaltbare Triblockcopolymere aus Poly(N-n-propylacrylamid) (A), Poly(methoxydiethylen glycol acrylat) (B) und Poly(N-ethylacrylamid) (C) in allen möglichen Blocksequenzen (ABC, BAC, ACB) durch schrittweisen Aufbau mittels RAFT Polymerisation erhalten. Das Aggregationsverhalten dieser Polymere in verdünnter wässriger Lösung war relativ komplex und hing stark von der Position der einzelnen Blöcke in den Triblockcopolymeren ab. Besonders die Position des Blocks mit der niedrigsten LCST (A) war ausschlaggebend für die resultierenden Aggregate. So wurde oberhalb der ersten Phasenübergangstemperatur nur Aggregation der Triblockcopolymere beobachtet, wenn der A Block an einem der beiden Enden der Polymere lokalisiert war. Wurde der A Block hingegen in der Mitte der Polymere positioniert, entstanden unimere Mizellen zwischen der ersten und zweiten Phasenübergangstemperatur, welche erst aggregierten, nachdem der zweite Block (B) seinen Phasenübergang durchlief. Die Transportereigenschaften dieser Triblockcopolymere wurden mittels Fluoreszenzspektroskopie getestet. Dazu wurde die Einlagerung eines hydrophoben, solvatochromen Fluoreszenzfarbstoffes, Nilrot, in Abhängigkeit der Temperatur untersucht. Im Gegensatz zu den Polymeren mit der Blocksequenz ABC oder ACB, zeigten die Polymere mit der Sequenz BAC eine verminderte Aufnahmefähigkeit des hydrophoben Farbstoffes oberhalb des ersten Phasenübergangs, was auf die fehlende Aggregation und die damit verbundenen relativ kleinen hydrophoben Domänen der unimolekularen Mizellen zwischen der ersten und zweiten Phasenübergangstemperatur zurückzuführen ist. Aufgrund des zunehmenden Verlustes von funktionellen Endgruppen während der RAFT Synthese von Triblockcopolymeren wurde ein neuartiges Konzept zur Einschrittsynthese von mehrfach schaltbaren Blockcopolymeren entwickelt. Dieses erlaubt die Synthese von mehrfach schaltbaren Diblock- und Triblockcopoylmeren in einem einzelnen Reaktionsschritt. Die Copolymeriation von verschiedenen N-substituierten Maleimiden mit einem thermisch schaltbaren Styrolderivat (4-Vinylbenzylmethoxytetrakis(oxyethylene) ether) ergab alternierende Copolymere mit variabler LCST. Die Verwendung eines Überschusses dieses styrolbasierten Monomers erlaubt ferner die Synthese von Gradientenblockcopolymeren in einem einzelnen Polymerisationsschritt. KW - Selbstorganisation KW - Blockcopolymer KW - RAFT KW - temperaturschaltbar KW - Mizelle KW - self-assembly KW - block copolymer KW - RAFT KW - thermoresponsive KW - micelle Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-53360 ER - TY - THES A1 - Schaal, Janina T1 - Synthese und Photochemie von photoaktivierbaren Biomolekülen T1 - Synthesis and photochemistry of photoactivate biomolecules N2 - Mechanistische und kinetische Untersuchungen von komplexen zellulären Prozessen in situ sind in den vergangenen Jahren durch den Einsatz photoaktivierbarer Biomoleküle, sogenannter caged Verbindungen, möglich geworden. Bei den caged Verbindungen handelt es sich um photolabile inaktive Derivate von biologisch aktiven Molekülen, aus denen durch ultraviolettes Licht mit Hilfe einer photochemischen Reaktion die natürliche, biologisch aktive Substanz schnell freigesetzt werden kann. Im Rahmen der vorliegenden Arbeit wurden caged Verbindungen von den Neurotransmittern Octopamin und Dopamin, dem Octopamin-Antagonist Epinastin, den Proteinsyntheseinhibitoren Emetin und Anisomycin, dem Protonophor CCCP und dem Riechstoff Bourgeonal hergestellt. Zur Synthese dieser caged Verbindungen wurden sowohl bekannte als auch verschiedene im Rahmen dieser Arbeit neu entwickelte photolabile Schutzgruppen mit einem (Cumarin-4-yl)methyl- bzw. einem 2-Nitrobenzyl-Gerüst eingesetzt. Entsprechende Syntheseverfahren wurden erarbeitet. Anschließend erfolgte eine umfassende physikalisch-chemische sowie photochemische Charakterisierung der erhaltenen caged Verbindungen. Dabei wurde besonders auf gute Löslichkeit in Wasser bei physiologischer Ionenstärke, schnelle und effiziente Photoreaktivität, hohe Extinktion bei Wellenlängen von 350-430 nm und gute solvolytische Stabilität bei geringer Toxizität der freigesetzten Schutzgruppe geachtet. Ein Schwerpunkt bei der photochemischen Charakterisierung bildeten die Untersuchungen zur Quantifizierung der 2-Photonen-Anregung, uncaging action cross-sections, der Cumarinylmethyl-caged Verbindungen, aufgrund ihrer Bedeutung für die Photofreisetzung von Biomolekülen, da die gleichzeitige Absorption von 2 IR-Photonen eine höhere dreidimensionale Auflösung und eine wesentlich tiefere Gewebepenetration erlaubt. Mit Hilfe von Kooperationspartnern wurden zeitaufgelösten Fluoreszenz- und IR-Messungen an verschiedenen (Cumarin-4-yl)methoxycarbonyl-caged Modellverbindungen durchgeführt, mit denen die Geschwindigkeitskonstanten k1 und kdecarb des Photolysemechanismus ermittelt wurde. Am Ende folgten die Anwendungserprobungen ausgewählter caged Verbindungen in einem Translationsassay bzw. in Zelluntersuchungen. N2 - In the last years mechanistic and kinetic in situ studies of complex cellular processes become possible by employing photoactivate Biomolecules, also called caged compounds, as a tool for these studies. Caged compounds are photolabile inactive derivates of biologic active molecules which are fast laid off the nature biologic active molecule by a photochemical reaction which was triggered by UV-light. In the present dissertation caged compounds of the neurotransmitters octopamine and dopamine, of the octopamine antagonist epinastine, of the proteine synthesis inhibitors emetine and anisomycine, of the ionophore CCCP and of the odorus substance Bourgeonal are synthesized. As precursors for the synthesis of that caged compounds some reported and several in these work newly developed photolabile protecting groups with (coumarin-4-yl)methyl- or 2-nitrobenzyl-scaffold were used. Corresponding Synthesis were designed. Afterwards the received caged compounds were global physical-chemical and photochemical characterised. In favour it was specifically valued for highly water solubility at pH 7,2, fast and efficient photo reactivity, high extinctions at wavelength 350-430 nm, well solvolytic stability and less toxicity of the redundant protecting groups. One key aspect of photochemical characterisation were the studies of uncaging action cross-sections of the coumarinylmethyl-caged molecules, because of their relevance for the photorelease of biomolecules in tissues. The simultaneous absorption of 2 IR-photons allowed highly three-dimensional release and a essentially deeper penetration in tissues. With the aid of co-operation partners were time-released fluorescence- and IR- measurements with several (coumarin-4-yl)methoxycarbonyl-caged molecules realised and therefore the rate constant k1 und kdecarb of the photolyse mechanismus were determined. At the end of the dissertation the achieved caged compounds were testet in translation assays and several cell cultures. KW - organische Chemie KW - caged Verbindungen KW - Cumarin KW - Nitrobenzyl KW - Neurotransmitter KW - organic chemistry KW - caged compounds KW - coumarine KW - nitrobenzyl KW - neurotransmitter Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-57929 ER - TY - THES A1 - Bergner, André T1 - Synchronization in complex systems with multiple time scales T1 - Synchronisation in komplexen Systemen mit mehreren Zeitskalen N2 - In the present work synchronization phenomena in complex dynamical systems exhibiting multiple time scales have been analyzed. Multiple time scales can be active in different manners. Three different systems have been analyzed with different methods from data analysis. The first system studied is a large heterogenous network of bursting neurons, that is a system with two predominant time scales, the fast firing of action potentials (spikes) and the burst of repetitive spikes followed by a quiescent phase. This system has been integrated numerically and analyzed with methods based on recurrence in phase space. An interesting result are the different transitions to synchrony found in the two distinct time scales. Moreover, an anomalous synchronization effect can be observed in the fast time scale, i.e. there is range of the coupling strength where desynchronization occurs. The second system analyzed, numerically as well as experimentally, is a pair of coupled CO₂ lasers in a chaotic bursting regime. This system is interesting due to its similarity with epidemic models. We explain the bursts by different time scales generated from unstable periodic orbits embedded in the chaotic attractor and perform a synchronization analysis of these different orbits utilizing the continuous wavelet transform. We find a diverse route to synchrony of these different observed time scales. The last system studied is a small network motif of limit cycle oscillators. Precisely, we have studied a hub motif, which serves as elementary building block for scale-free networks, a type of network found in many real world applications. These hubs are of special importance for communication and information transfer in complex networks. Here, a detailed study on the mechanism of synchronization in oscillatory networks with a broad frequency distribution has been carried out. In particular, we find a remote synchronization of nodes in the network which are not directly coupled. We also explain the responsible mechanism and its limitations and constraints. Further we derive an analytic expression for it and show that information transmission in pure phase oscillators, such as the Kuramoto type, is limited. In addition to the numerical and analytic analysis an experiment consisting of electrical circuits has been designed. The obtained results confirm the former findings. N2 - In der vorliegenden Arbeit wurden Synchronisationsphänomene in komplexen Systemen mit mehreren Zeitskalen untersucht. Es gibt mehrere Möglichkeiten wie diese verschiedenen Zeitskalen vorkommen können. Drei verschiedene Systeme, jedes mit einer anderen Art von zeitlicher Multiskalität, wurden mit unterschiedlichen Methoden der Datenanalyse untersucht. Das erste untersuchte System ist ein ausgedehntes heterogenes Netzwerk von Neuronen mit zwei dominanten Zeitskalen, zum einen die schnelle Folge von Aktionspotenzialen und zum anderen einer abwechselnden Folge von einer Phase von Aktionspotenzialen und einer Ruhephase. Dieses System wurde numerisch integriert und mit Methoden der Phasenraumrekurrenz untersucht. Ein interessantes Ergebnis ist der unterschiedliche Übergang zur Synchronisation der Neuronen auf den beiden verschiedenen Zeitskalen. Des weiteren kann auf der schnellen Zeitskala eine anomale Synchronisation beobachtet werden, d.h. es gibt einen Bereich der Kopplungsstärke in dem es zu einer Desynchronisation kommt. Als zweites wurde, sowohl numerisch als auch experimentell, ein System von gekoppelten CO₂ Lasern untersucht, welche in einem chaotischen bursting Modus arbeiten. Dieses System ist auch durch seine Äquivalenz zu Epidemiemodellen interessant. Wir erklären die Bursts durch unterschiedliche Zeitskalen, welche durch in den chaotischen Attraktor eingebettete instabile periodische Orbits generiert werden. Wir führen eine Synchronisationsanalyse mit Hilfe der kontinuierlichen Wavelettransformation durch und finden einen unterschiedlichen Übergang zur Synchronisation auf den unterschiedlichen Zeitskalen. Das dritte analysierte System ist ein Netzwerkmotiv von Grenzzyklusoszillatoren. Genauer handelt es sich um ein Nabenmotiv, welches einen elementaren Grundbaustein von skalenfreien Netzwerken darstellt, das sind Netzwerke die eine bedeutende Rolle in vielen realen Anwendungen spielen. Diese Naben sind von besonderer Bedeutung für die Kommunikation und den Informationstransport in komplexen Netzwerken. Hierbei wurde eine detaillierte Untersuchung des Synchronisationsmechanismus in oszillatorischen Netzwerken mit einer breiten Frequenzverteilung durchgeführt. Insbesondere beobachten wir eine Fernsynchronisation von Netzwerkknoten, die nur indirekt über andere Oszillatoren miteinander gekoppelt sind. Wir erklären den zu Grunde liegenden Mechanismus und zeigen dessen Grenzen und Bedingungen auf. Des weiteren leiten wir einen analytischen Ausdruck für den Mechanismus her und zeigen, dass eine Informationsübertragung in reinen Phasenoszillatoren, wie beispielsweise vom Kuramototyp, eingeschränkt ist. Diese Ergebnisse konnten wir durch Experimente mit elektrischen Schaltkreisen bestätigen. KW - Komplexe Systeme KW - Synchronisation KW - Nichtlineare Dynamik KW - Datenanalyse KW - complex systems KW - synchronization KW - nonlinear dynamics KW - data analysis Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-53407 ER - TY - THES A1 - Vosloh, Daniel T1 - Subcellular compartmentation of primary carbon metabolism in mesophyll cells of Arabidopsis thaliana T1 - Subzelluläre Kompartimentierung des primären Kohlenstoffmetabolismus in Mesophyllzellen von Arabidopsis thaliana N2 - Metabolismus in Pflanzenzellen ist stark kompartimentiert. Viele Stoffwechselwege haben Reaktionen in mehr als einem Kompartiment. Zum Beispiel wird während der Photosynthese in pflanzlichen Mesophyllzellen Kohlenstoff in Form von Stärke in den Chloroplasten synthetisiert, während es im Zytosol in Form von Sacharose gebildet und in der Vakuole gespeichert wird. Diese Reaktionen sind strikt reguliert um ein Gleichgewicht der Kohlenstoffpools der verschiedenen Kompartimente aufrecht zu erhalten und die Energieversorgung aller Teile der Zelle für anabolische Reaktionen sicher zu stellen. Ich wende eine Methode an, bei der die Zellen unter nicht-wässrigen Bedingungen fraktioniert werden und daher der metabolische Status der während der Ernte herrschte über den ganzen Zeitraum der Auftrennung beibehalten wird. Durch die Kombination von nichtwässriger Fraktionierung und verschiedener Massenspektrometrietechniken (Flüssigchromotagraphie- und Gaschromotagraphie basierende Massenspekrometrie) ist es möglich die intrazelluläre Verteilung der meisten Intermediate des photosynthetischen Kohlenstoffstoffwechsels und der Produkte der nachgelagerten metabolischen Reaktionen zu bestimmen. Das Wissen über die in vivo Konzentrationen dieser Metabolite wurde genutzt um die Änderung der freien Gibbs Energie in vivo zu bestimmen. Mit Hilfe dessen kann bestimmt werden, welche Reaktion sich in einem Gleichgewichtszustand befinden und welche davon entfernt sind. Die Konzentration der Enzyme und der Km Werte wurden mit den Konzentrationen der Metabolite in vivo verglichen, um festzustellen, welche Enzyme substratlimitiert sind und somit sensitiv gegenüber Änderungen der Substratkonzentration sind. Verschiedene Intermediate des Calvin-Benson Zyklus sind gleichzeitig Substrate für andere Stoffwechselwege, als da wären Dihyroxyaceton-phosphat (DHAP, Saccharosesynthese), Fructose 6-phosphat (Fru6P, Stärkesynthese), Erythrose 4-phosphat (E4P, Shikimat Stoffwechselweg) und Ribose 5-phosphat (R5P, Nukleotidbiosynthese). Die Enzyme, die diese Intermediate verstoffwechseln, liegen an den Abzweigungspunkten zu diesen Stoffwechselwegen. Diese sind Trisose phosphat isomerase (DHAP), Transketolase (E4P), Sedoheptulose-1,7 biphosphat aldolase (E4P) und Ribose-5-phosphat isomerase (R5P), welche nicht mit ihren Substraten gesättigt sind, da die jeweilige Substratkonzentration geringer als der zugehörige Km Wert ist. Für metabolische Kontrolle bedeutet dies, dass diese Schritte am sensitivsten gegenüber Änderungen der Substratkonzentrationen sind. Im Gegensatz dazu sind die regulierten irreversiblen Schritte von Fructose-1,6.biphosphatase und Sedoheptulose-1,7-biphosphatase relativ insensitiv gegenüber Änderungen der Substratkonzentration. Für den Stoffwechselweg der Saccharosesynthese konnte gezeigt werden, dass die zytosolische Aldolase eine geringer Bindeseitenkonzentration als Substratkonzentration (DHAP) aufweist, und dass die Konzentration von Saccharose-6-phosphat geringer als der Km Wert des synthetisierenden Enzyms Saccharose-phosphatase ist. Sowohl die Saccharose-phosphat-synthase, also auch die Saccharose-phosphatase sind in vivo weit von einem Gleichgewichtszustand entfernt. In Wildtyp Arabidopsis thaliana Columbia-0 Blättern wurde der gesamte Pool von ADPGlc im Chloroplasten gefunden. Das Enzyme ADPGlc pyrophosphorylase ist im Chloroplasten lokalisiert und synthetisiert ADPGlc aus ATP und Glc1P. Dieses Verteilungsmuster spricht eindeutig gegen die Hypothese von Pozueta-Romero und Kollegen, dass ADPGlc im Zytosol durch ADP vermittelte Spaltung von Saccharose durch die Saccharose Synthase erzeugt wird. Basierend auf dieser Beobachtung und anderen veröffentlichten Ergebnissen wurde geschlußfolgert, dass der generell akzeptierte Stoffwechselweg der Stärkesynthese durch ADPGlc Produktion via ADPGlc pyrophosphorylase in den Chloroplasten korrekt ist, und die Hypothese des alternativen Stoffwechselweges unhaltbar ist. Innerhalb des Stoffwechselweges der Saccharosesynthsese wurde festgestellt, dass die Konzentration von ADPGlc geringer als der Km Wert des Stärkesynthase ist, was darauf hindeutet, dass das Enzym substratlimitiert ist. Eine generelle Beobachtung ist, dass viele Enzmye des Calvin-Benson Zyklus ähnliche Bindeseitenkonzentrationen wie Metabolitkonzentrationen aufweisen, wohingegen in den Synthesewegen von Saccharose und Stärke die Bindeseitenkonzentrationen der Enzyme viel geringer als die Metabolitkonzentrationen sind. N2 - Metabolism in plant cells is highly compartmented, with many pathways involving reactions in more than one compartment. For example, during photosynthesis in leaf mesophyll cells, primary carbon fixation and starch synthesis take place in the chloroplast, whereas sucrose is synthesized in the cytosol and stored in the vacuole. These reactions are tightly regulated to keep a fine balance between the carbon pools of the different compartments and to fulfil the energy needs of the organelles. I applied a technique which fractionates the cells under non-aqueous conditions, whereby the metabolic state is frozen at the time of harvest and held in stasis throughout the fractionation procedure. With the combination of non-aqueous fractionation and mass spectrometry based metabolite measurements (LC-MS/MS, GC-MS) it was possible to investigate the intracellular distributions of the intermediates of photosynthetic carbon metabolism and its products in subsequent metabolic reactions. With the knowledge about the in vivo concentrations of these metabolites under steady state photosynthesis conditions it was possible to calculate the mass action ratio and change in Gibbs free energy in vivo for each reaction in the pathway, to determine which reactions are near equilibrium and which are far removed from equilibrium. The Km value and concentration of each enzyme were compared with the concentrations of its substrates in vivo to assess which reactions are substrate limited and so sensitive to changes in substrate concentration. Several intermediates of the Calvin-Benson cycle are substrates for other pathways, including dihydroxyacetone-phosphate (DHAP,sucrose synthesis), fructose 6-phosphate (Fru6P, starch synthesis), erythrose 4-phosphate (E4P,shikimate pathway) and ribose 5-phosphate (R5P, nucleotide synthesis). Several of the enzymes that metabolise these intermediates, and so lie at branch points in the pathway, are triose-phosphate isomerase (DHAP), transketolase (E4P, Fru6P), sedoheptulose-1,7-bisphosphate aldolase (E4P) and ribose-5-phosphate isomerase (R5P) are not saturated with their respective substrate as the metabolite concentration is lower than the respective Km value. In terms of metabolic control these are the steps that are most sensitive to changes in substrate availability, while the regulated irreversible reactions of fructose-1,6-bisphosphatase and sedoheptulose-1,7-bisphosphatase are relatively insensitive to changes in the concentrations of their substrates. In the pathway of sucrose synthesis it was shown that the concentration of the catalytic binding site of the cytosolic aldolase is lower than the substrate concentration of DHAP, and that the concentration of Suc6P is lower than the Km of sucrose-phosphatase for this substrate. Both the sucrose-phosphate synthase and sucrose-phosphatase reactions are far removed from equilibrium in vivo. In wild type A. thaliana Columbia-0 leaves, all of the ADPGlc was found to be localised in the chloroplasts. ADPglucose pyrophosphorylase is localised to the chloroplast and synthesises ADPGlc from ATP and Glc1P. This distribution argues strongly against the hypothesis proposed by Pozueta-Romero and colleagues that ADPGlc for starch synthesis is produced in the cytosol via ADP-mediated cleavage of sucrose by sucrose synthase. Based on this observation and other published data it was concluded that the generally accepted pathway of starch synthesis from ADPGlc produced by ADPglucose pyrophosphorylase in the chloroplasts is correct, and that the alternative pathway is untenable. Within the pathway of starch synthesis the concentration of ADPGlc was found to be well below the Km value of starch synthase for ADPGlc, indicating that the enzyme is substrate limited. A general finding in the comparison of the Calvin-Benson cycle with the synthesis pathways of sucrose and starch is that many enzymes in the Calvin Benson cycle have active binding site concentrations that are close to the metabolite concentrations, while for nearly all enzymes in the synthesis pathways the active binding site concentrations are much lower than the metabolite concentrations. KW - Pflanze KW - Kohlenstoffmetabolismus KW - Mesophyll KW - Zelle KW - plant KW - carbon metabolism KW - mesophyll KW - cell Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-55534 ER - TY - THES A1 - Ruge, Marcus T1 - Stimmungen und Erwartungen im System der Märkte : eine Analyse mit DPLS-Modellen T1 - Sentiments and expectations in the system of markets : an analysis with DPLS models N2 - Diese Forschungsarbeit widmet sich der Analyse von Stimmungen und Erwartungen im System der Märkte mit Dynamic Partial Least Squares (DPLS) Modellen. Die Analyse komplexer Systeme mit umfangreichen Datensätzen und die Erkennung relevanter Muster erfordern die Verwendung moderner statistischer Verfahren. DPLS-Modelle, eine Variante der Strukturgleichungs-modelle mit Latenten Variablen, werden methodisch erweitert, um mehrere zeitliche Verzögerungsstufen gleichzeitig modellieren zu können. Die ökonometrischen Modelle versuchen, zahlreiche latente Einflussfaktoren und ihre verdeckten Beziehungen zu identifizieren. Als Daten werden rund 80 Indikatoren verwendet von Januar 1991 bis Juni 2010, um Stimmungen, Erwartungen und wirtschaftlich relevanten Größen zu operationalisieren und die Zusammenhänge detailliert zu untersuchen. Die Modellergebnisse zeigen, dass Stimmungen, also die Einschätzung der aktuellen wirtschaftlichen Lage, deutlich mit wirtschaftlichen Größen zusammenhängen, unter anderem mit Investitionen, Auftragseingängen oder Aktienmarktentwicklungen. Die Erwartungen, also die Einschätzung der zukünftigen Entwicklung, bieten eine mittlere bis schwache Prognosekraft für sechs bis maximal achtzehn Monate in die Zukunft. Für kürzere Zeiträume von sechs Monaten sind Stimmungen und Erwartungen die besten verfügbaren Prognosevariablen. Die Analyse der Modellabweichungen erlaubt Rückschlüsse auf wirtschaftstheoretische Konzepte, wie Rationalität der Erwartungen. Auffällig sind scheinbare Phasen der systematischen Über- und Unterbewertungen der aktuellen Situation oder zukünftigen Entwicklung, insbesondere vor und nach Krisensituationen. Die Ergebnisse dieser Arbeit geben somit einen erweiterten Einblick in die empirischen Zusammenhänge subjektiver Einschätzungen mit realen wirtschaftlichen Größen. N2 - This research thesis is devoted to the analysis of sentiments and expectations in the system of economic markets with Dynamic Partial Least Squares (DPLS) models with time-series. The analysis of complex systems with large data sets and discovering relevant patterns require the use of modern statistical methods. The DPLS models, a variant of structural equation models with latent variables, are methodically extended to include multiple lags simultaneously. The econometric models try to identify a large number of latent factors and their unobservable relations. The data consists of about 80 indicators from January 1991 to June 2010 to quantify sentiments, expectations and economically relevant variables and examine the relations in detail. The results show, that the sentiments, the assessment of the current economic situation, are clearly linked with economic variables like investments, incoming orders and stock market developments. The expectations, the assessment of future development, provide a weak to moderate predictive power for up to 18 months in the future. For shorter periods of six months sentiments and expectations are the best available forecast variables. The analysis of model deviations allows to draw conclusions about theoretical concepts such as rationality of expectations. There seem to be phases of systematic over- and undervaluation of the current situation and future development, especially before and after economic crisis. The results should provide a deeper insight into the empirical relationships between subjective assessments and real economic variables. T3 - Potsdamer Schriften zu Statistik und Wirtschaft - 1 KW - Stimmungen KW - Erwartungen KW - Wirtschaft KW - PLS KW - DPLS KW - sentiments KW - expectations KW - economy KW - PLS KW - DPLS Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-52900 SN - 978-3-86956-142-4 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - THES A1 - Kalbitz, René T1 - Stability of polarization in organic ferroelectric metal-insulator-semiconductor structures T1 - Stabilität der Ferroelektrischen Polarisation in Organischen Metall-Isolator-Halbleiter Strukturen N2 - Organic thin film transistors (TFT) are an attractive option for low cost electronic applications and may be used for active matrix displays and for RFID applications. To extend the range of applications there is a need to develop and optimise the performance of non-volatile memory devices that are compatible with the solution-processing fabrication procedures used in plastic electronics. A possible candidate is an organic TFT incorporating the ferroelectric co-polymer poly(vinylidenefluoride-trifluoroethylene)(P(VDF-TrFE)) as the gate insulator. Dielectric measurements have been carried out on all-organic metal-insulator-semiconductor structures with the ferroelectric polymer poly(vinylidenefluoride-trifluoroethylene) (P(VDF-TrFE)) as the gate insu-lator. The capacitance spectra of MIS devices, were measured under different biases, showing the effect of charge accumulation and depletion on the Maxwell-Wagner peak. The position and height of this peak clearly indicates the lack of stable depletion behavior and the decrease of mobility when increasing the depletion zone width, i.e. upon moving into the P3HT bulk. The lack of stable depletion was further investigated with capacitance-voltage (C-V) measurements. When the structure was driven into depletion, C-V plots showed a positive flat-band voltage shift, arising from the change in polarization state of the ferroelectric insulator. When biased into accumulation, the polarization was reversed. It is shown that the two polarization states are stable i.e. no depolarization occurs below the coercive field. However, negative charge trapped at the semiconductor-insulator interface during the depletion cycle masks the negative shift in flat-band voltage expected during the sweep to accumulation voltages. The measured output characteristics of the studied ferroelectric-field-effect transistors confirmed the results of the C-V plots. Furthermore, the results indicated a trapping of electrons at the positively charged surfaces of the ferroelectrically polarized P(VDF-TrFE) crystallites near the insulator/semiconductor in-terface during the first poling cycles. The study of the MIS structure by means of thermally stimulated current (TSC) revealed further evidence for the stability of the polarization under depletion voltages. It was shown, that the lack of stable depletion behavior is caused by the compensation of the orientational polarization by fixed electrons at the interface and not by the depolarization of the insulator, as proposed in several publications. The above results suggest a performance improvement of non-volatile memory devices by the optimization of the interface. N2 - Organische Transistoren sind besonders geeignet für die Herstellung verschiedener preisgünstiger, elektronischer Anwendungen, wie zum Beispiel Radio-Frequenz-Identifikations-Anhänger (RFID). Für die Erweiterung dieser Anwendung ist es notwendig die Funktion von organischen Speicherelementen weiter zu verbessern. Das ferroelektrische Polymer Poly(vinylidene-Fluoride-Trifluoroethylene) (P(VDF-TrFE)) eignet sich besonders gut als remanent polarisierbarer Isolator in Dünnschich-Speicherelementen. Um Schalt- und Polarisationsverhalten solcher Speicherelemente zu untersuchen, wurden P(VDF-TrFE)-Kondensatoren und Metall-Halbleiter-Isolator-Proben sowie ferroelektrische Feld-Effekt-Transistoren (Fe-FET) aus dem Halbleiter Poly(3-Hexylthiophene) (P3HT) und P(VDF-TrFE) hergestellt und dielektrisch untersucht. Die Charakterisierung der MIS-Strukturen mittels spannungsabhängiger Kapazitätsspektren machte deutlich, dass es nicht möglich ist, einen stabilen Verarmungzustand (Aus-Zustand) zu realisieren. Kapazität-Spannungs-Messungen (C-V) an MIS-Proben mit uni/bi-polaren Spannungszyklen zeigten eine stabile ferroelektrische Polarisation des P(VDF-TrFE)-Films. Eine Depolarisation des Isolators durch den Mangel an Minoritäts-Ladungsträgern konnte als Grund für die Instabilität des Verarmungs-Zustandes ausgeschlossen werden. Die C-V-Kurven wiesen vielmehr auf die Existenz fixierter, negativer Ladungsträger an der Grenzfläche hin. Zusammenfassend kann festgestellt werden: die Ursache der Ladungsträgerinstabilitäten in organischen ferroelektrischen Speicherelementen ist auf die Kompensation der ferroelektrischen Orientierungspolarisation durch "getrappte"(fixierte) negative Ladungsträger zurückzuführen. Dieses Ergebnis liefert nun eine Grundlage für die Optimierung der Isolator/Halbleiter-Grenzfläche mit dem Ziel, die Zahl der Fallenzustände zu minimieren. Auf diesem Wege könnte die Stabilität des Speicherzustandes in organischen Dünnschichtspeicherelementen deutlich verbessert werden. KW - ferroelektrische Polarisation KW - Metall-Isolator-Halbleiter KW - organische Elektronik KW - Dielektrische Spektroskopie KW - Feld-Effekt-Transistoren KW - organic electronic KW - dielectric spectroskopie KW - non-volatile memory KW - organic electronic KW - ferroelectric polarization Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-57276 ER -