TY - JOUR A1 - Wang, Yongbo A1 - Bekeschus, Benjamin A1 - Handorf, Doerthe A1 - Liu, Xingqi A1 - Dallmeyer, Anne A1 - Herzschuh, Ulrike T1 - Coherent tropical-subtropical Holocene see-saw moisture patterns in the Eastern Hemisphere monsoon systems JF - Quaternary science reviews : the international multidisciplinary research and review journal N2 - The concept of a Global Monsoon (GM) has been proposed based on modern precipitation observations, but its application over a wide range of temporal scales is still under debate. Here, we present a synthesis of 268 continental paleo-moisture records collected from monsoonal systems in the Eastern Hemisphere, including the East Asian Monsoon (EAsM), the Indian Monsoon (IM), the East African Monsoon (EAfM), and the Australian Monsoon (AuM) covering the last 18,000 years. The overall pattern of late Glacial to Holocene moisture change is consistent with those inferred from ice cores and marine records. With respect to the last 10,000 years (10 ka), i.e. a period that has high spatial coverage, a Fuzzy c-Means clustering analysis of the moisture index records together with "Xie-Beni" index reveals four clusters of our data set. The paleoclimatic meaning of each cluster is interpreted considering the temporal evolution and spatial distribution patterns. The major trend in the tropical AuM, EAfM, and IM regions is a gradual decrease in moisture conditions since the early Holocene. Moisture changes in the EAsM regions show maximum index values between 8 and 6 ka. However, records located in nearby subtropical areas, i.e. in regions not influenced by the intertropical convergence zone, show an opposite trend compared to the tropical monsoon regions (AuM, EAfM and IM), i.e. a gradual increase. Analyses of modern meteorological data reveal the same spatial patterns as in the paleoclimate records such that, in times of overall monsoon strengthening, lower precipitation rates are observed in the nearby subtropical areas. We explain this pattern as the effect of a strong monsoon circulation suppressing air uplift in nearby subtropical areas, and hence hindering precipitation. By analogy to the modern system, this would mean that during the early Holocene strong monsoon period, the intensified ascending airflows within the monsoon domains led to relatively weaker ascending or even descending airflows in the adjacent subtropical regions, resulting in a precipitation deficit compared to the late Holocene. Our conceptual model therefore integrates regionally contrasting moisture changes into the Global Monsoon hypothesis. (C) 2017 Elsevier Ltd. All rights reserved. KW - Global monsoon KW - Holocene KW - Eastern hemisphere KW - Moisture evolution Y1 - 2017 U6 - https://doi.org/10.1016/j.quascirev.2017.06.006 SN - 0277-3791 VL - 169 SP - 231 EP - 242 PB - Elsevier CY - Oxford ER - TY - GEN A1 - Wang, Yongbo A1 - Herzschuh, Ulrike A1 - Liu, Xingqi A1 - Korup, Oliver A1 - Diekmann, Bernhard T1 - Reply to Chong Xu’s comment on: Wang, Yongbo; Herzschuh, Ulrike; Liu, Xingqi; Korup, Oliver; Diekmann, Bernhard: A high-resolution sedimentary archive from landslide-dammed Lake Mengda, north-eastern Tibetan Plateau. - Journal of Paleolimnology. - 51 (2014), S. 303 - 312 T2 - Journal of paleolimnolog Y1 - 2016 U6 - https://doi.org/10.1007/s10933-016-9937-8 SN - 0921-2728 SN - 1573-0417 VL - 57 SP - 163 EP - 164 PB - Springer CY - Dordrecht ER - TY - THES A1 - Weege, Stefanie T1 - Climatic drivers of retrogressive thaw slump activity and resulting sediment and carbon release to the nearshore zone of Herschel Island, Yukon Territory, Canada T1 - Einfluss des Klimas auf das Auftauen einer rückschreitenden Erosionsfront und die daraus resultierende Sediment- und Kohlenstofffreigabe in den Küstenbereich von Herschel Island, Kanada N2 - The Yukon Coast in Canada is an ice-rich permafrost coast and highly sensitive to changing environmental conditions. Retrogressive thaw slumps are a common thermoerosion feature along this coast, and develop through the thawing of exposed ice-rich permafrost on slopes and removal of accumulating debris. They contribute large amounts of sediment, including organic carbon and nitrogen, to the nearshore zone. The objective of this study was to 1) identify the climatic and geomorphological drivers of sediment-meltwater release, 2) quantify the amount of released meltwater, sediment, organic carbon and nitrogen, and 3) project the evolution of sediment-meltwater release of retrogressive thaw slumps in a changing future climate. The analysis is based on data collected over 18 days in July 2013 and 18 days in August 2012. A cut-throat flume was set up in the main sediment-meltwater channel of the largest retrogressive thaw slump on Herschel Island. In addition, two weather stations, one on top of the undisturbed tundra and one on the slump floor, measured incoming solar radiation, air temperature, wind speed and precipitation. The discharge volume eroding from the ice-rich permafrost and retreating snowbanks was measured and compared to the meteorological data collected in real time with a resolution of one minute. The results show that the release of sediment-meltwater from thawing of the ice-rich permafrost headwall is strongly related to snowmelt, incoming solar radiation and air temperature. Snowmelt led to seasonal differences, especially due to the additional contribution of water to the eroding sediment-meltwater from headwall ablation, lead to dilution of the sediment-meltwater composition. Incoming solar radiation and air temperature were the main drivers for diurnal and inter-diurnal fluctuations. In July (2013), the retrogressive thaw slump released about 25 000 m³ of sediment-meltwater, containing 225 kg dissolved organic carbon and 2050 t of sediment, which in turn included 33 t organic carbon, and 4 t total nitrogen. In August (2012), just 15 600 m³ of sediment-meltwater was released, since there was no additional contribution from snowmelt. However, even without the additional dilution, 281 kg dissolved organic carbon was released. The sediment concentration was twice as high as in July, with sediment contents of up to 457 g l-1 and 3058 t of sediment, including 53 t organic carbon and 5 t nitrogen, being released. In addition, the data from the 36 days of observations from Slump D were upscaled to cover the main summer season of 1 July to 31 August (62 days) and to include all 229 active retrogressive thaw slumps along the Yukon Coast. In total, all retrogressive thaw slumps along the Yukon Coast contribute a minimum of 1.4 Mio. m³ sediment-meltwater each thawing season, containing a minimum of 172 000 t sediment with 3119 t organic carbon, 327 t nitrogen and 17 t dissolved organic carbon. Therefore, in addition to the coastal erosion input to the Beaufort Sea, retrogressive thaw slumps additionally release 3 % of sediment and 8 % of organic carbon into the ocean. Finally, the future evolution of retrogressive thaw slumps under a warming scenario with summer air temperatures increasing by 2-3 °C by 2081-2100, would lead to an increase of 109-114% in release of sediment-meltwater. It can be concluded that retrogressive thaw slumps are sensitive to climatic conditions and under projected future Arctic warming will contribute larger amounts of thawed permafrost material (including organic carbon and nitrogen) into the environment. N2 - Die Yukon Küste in Kanada ist eine eisreiche Permafrost Küste und reagiert hoch sensibel auf verändernde Umweltbedingungen. Rückschreitende auftaubedingte Rutschungen sind vielzählig entlang der Küste und entstehen, wenn exponierter eisreicher Permafrost an Hängen auftaut und der daraus resultierende Schlamm abtransportiert wird. Diese Rutschungen tragen große Mengen von Sediment, inklusive organischen Kohlenstoff und Stickstoff, in den küstennahen Bereich. Das Ziel dieser Studie war 1) die klimatischen und geomorphologischen Antriebskräfte für die Freisetzung von Sediment-Schmelzwasser zu identifizieren 2) die Mengen an Schmelzwasser, Sediment, organischen Kohlenstoff und Stickstoff zu quantifizieren und 3) die Entwicklung der Sediment-Schmelzwasser-Freigabe von rückschreitenden Rutschungen unter zukünftigen klimatischen Veränderungen abzuschätzen. Die größte rückschreitende Rutschung auf Herschel Island wird als „Slump D“ bezeichnet und steht im Fokus dieser Arbeit. Die Analysen basierten auf den Daten, die über 18 Tage im Juli (2013) und 18 Tage im August (2012) erhoben wurden. Eine Abfluss-Messrinne wurde in den Haupt-Sediment-Schmelzwasser-Kanal eingebaut, um die Sediment-Schmelzwassermassen zu erfassen. Zusätzlich wurden zwei Wetterstationen aufgebaut (auf der unberührten Tundra und innerhalb der Erosionsfläche), die Sonneneinstrahlung, Lufttemperatur, Windgeschwindigkeit und Niederschlagsmenge aufzeichneten. Das Abflussvolumen, das vom auftauenden, eisreichen Permafrost und den schmelzenden Schneebänken ablief, wurde gemessen und mit den meteorologischen Daten in Echtzeit mit einer Auflösung von einer Minute verglichen. Die Ergebnisse zeigen, dass eine Freigabe von Sediment-Schmelzwasser beim Auftauen der eisreichen Permafrost-Steilklippe stark von Schneeschmelze, Sonneneinstrahlung und Lufttemperatur abhängen. Die Schneeschmelze führt zu saisonalen Unterschieden, besonders durch den zusätzlichen Betrag von Wasser zu dem erodierenden Sediment-Schmelzwasser der auftauenden Steilklippe. Dies führt zu einer Verdünnung des Sediment-Schmelzwassers. Sonneneinstrahlung und Lufttemperaturen waren die Hauptantriebskräfte für die Schwankungen im Tagesverlauf und die Unterschiede zwischen den Tagen. Die rückschreitende Rutschung gab im Juli (2013) ungefähr 25 000 m³ Sediment-Schmelzwasser frei, welches 225 kg gelösten organischen Kohlenstoff, 2050 t Sediment, inklusive 33 t organischen Kohlenstoff und 4 t Stickstoff enthielt. Im August (2012) fehlte der zusätzliche Eintrag der Schneeschmelze und das Sediment-Schmelzwasser-Volumen war geringer mit 15 600 m³. Dennoch, ohne die zusätzliche Verdünnung, wurden 281 kg gelöster organischer Kohlenstoff freigesetzt. Die Sedimentkonzentration war doppelt so hoch und führte zu einem Sedimentgehalt mit bis zu 457 g l-1 zu 3058 t Sediment, inklusive 53 t organischen Kohlenstoff und 5 t Stickstoff. Zusätzlich wurden die Daten der 36-tägigen Abflussmessung der rückschreitenden Rutschung auf 62 Tage, von 1. Juli bis 31. August auf alle 229 aktiven Rutschungen entlang der Yukon Küste hochgerechnet. Es wurde diskutiert, dass alle rückschreitenden Rutschungen entlang der Yukon Küste zusammen mindestens 1,4 Mio. m³ Sediment-Schmelzwasser während jeder Auftausaison freigeben. Diese enthalten ein Minimum von 172 000 t Sediment, 3119 t organischen Kohlenstoff, 327 t Stickstoff und 17 t gelösten organischen Kohlenstoff. Daher kann zusammengefasst werden, dass zusätzlich zur Küstenerosion von allen Rutschungen noch ein zusätzlicher Beitrag von 3 % Sediment und 8 % organischen Kohlenstoff in die Beaufort See eingetragen wird. Schließlich wurde die zukünftige Entwicklung dieser rückschreitenden Rutschungen bei einem Temperaturanstieg von 2-3 °C bis 2081-2100 diskutiert. Dies könnte zu einem Anstieg der Sediment-Schmelzwasser-Freigabe von 109-114 % führen. Es kann daraus geschlossen werden, dass rückschreitende Rutschungen sensibel auf Klimabedingungen reagieren und mit der Arktischen Erwärmung größere Mengen an auftauenden Permafrost (inklusive organischen Kohlenstoff und Stickstoff) in die Umwelt freigeben werden. KW - permafrost KW - arctic KW - Canada KW - coast KW - erosion KW - Permafrost KW - Arktik KW - Kanada KW - Küste KW - Erosion Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-397947 ER - TY - JOUR A1 - Weis, Christopher A1 - Sternemann, Christian A1 - Cerantola, Valerio A1 - Sahle, Christoph J. A1 - Spiekermann, Georg A1 - Harder, Manuel A1 - Forov, Yury A1 - Kononov, Alexander A1 - Sakrowski, Robin A1 - Yavas, Hasan A1 - Tolan, Metin A1 - Wilke, Max T1 - Pressure driven spin transition in siderite and magnesiosiderite single crystals JF - Scientific reports Y1 - 2017 U6 - https://doi.org/10.1038/s41598-017-16733-3 SN - 2045-2322 VL - 7 PB - Nature Publ. Group CY - London ER - TY - JOUR A1 - Weisshuhn, Peter A1 - Reckling, Moritz A1 - Stachow, Ulrich A1 - Wiggering, Hubert T1 - Supporting Agricultural Ecosystem Services through the Integration of Perennial Polycultures into Crop Rotations JF - Sustainability N2 - This review analyzes the potential role and long-term effects of field perennial polycultures (mixtures) in agricultural systems, with the aim of reducing the trade-offs between provisioning and regulating ecosystem services. First, crop rotations are identified as a suitable tool for the assessment of the long-term effects of perennial polycultures on ecosystem services, which are not visible at the single-crop level. Second, the ability of perennial polycultures to support ecosystem services when used in crop rotations is quantified through eight agricultural ecosystem services. Legume-grass mixtures and wildflower mixtures are used as examples of perennial polycultures, and compared with silage maize as a typical crop for biomass production. Perennial polycultures enhance soil fertility, soil protection, climate regulation, pollination, pest and weed control, and landscape aesthetics compared with maize. They also score lower for biomass production compared with maize, which confirms the trade-off between provisioning and regulating ecosystem services. However, the additional positive factors provided by perennial polycultures, such as reduced costs for mineral fertilizer, pesticides, and soil tillage, and a significant preceding crop effect that increases the yields of subsequent crops, should be taken into account. However, a full assessment of agricultural ecosystem services requires a more holistic analysis that is beyond the capabilities of current frameworks. KW - agroecosystem KW - assessment KW - legume-grass mixture KW - wildflower mixture KW - perennial crop KW - mixed cropping Y1 - 2017 U6 - https://doi.org/10.3390/su9122267 SN - 2071-1050 VL - 9 PB - MDPI CY - Basel ER - TY - GEN A1 - Wetzel, Maria A1 - Kempka, Thomas A1 - Kühn, Michael T1 - Predicting macroscopic elastic rock properties requires detailed information on microstructure T2 - Energy procedia N2 - Predicting variations in macroscopic mechanical rock behaviour due to microstructural changes, driven by mineral precipitation and dissolution is necessary to couple chemo-mechanical processes in geological subsurface simulations. We apply 3D numerical homogenization models to estimate Young’s moduli for five synthetic microstructures, and successfully validate our results for comparable geometries with the analytical Mori-Tanaka approach. Further, we demonstrate that considering specific rock microstructures is of paramount importance, since calculated elastic properties may deviate by up to 230 % for the same mineral composition. Moreover, agreement between simulated and experimentally determined Young’s moduli is significantly improved, when detailed spatial information are employed. KW - digital rock physics KW - effective elastic properties KW - numerical Y1 - 2017 U6 - https://doi.org/10.1016/j.egypro.2017.08.195 SN - 1876-6102 VL - 125 SP - 561 EP - 570 PB - Elsevier CY - Amsterdam ER - TY - THES A1 - Wieczorek, Mareike T1 - Stand structure patterns in the Siberian treeline under climate change Y1 - 2017 ER - TY - JOUR A1 - Wieczorek, Mareike A1 - Kolmogorov, Alexei A1 - Kruse, Stefan A1 - Jacobsen, Inga A1 - Nitze, Ingmar A1 - Nikolaev, Anatoly N. A1 - Heinrich, Ingo A1 - Pestryakova, Luidmila Agafyevna A1 - Herzschuh, Ulrike T1 - Disturbance-effects on treeline larch-stands in the lower Kolyma River area (NE Siberia) JF - Silva Fennica : a quarterly journal for forest science N2 - Tree stands in the boreal treeline ecotone are, in addition to climate change, impacted by disturbances such as fire, water-related disturbances and logging. We aim to understand how these disturbances affect growth, age structure, and spatial patterns of larch stands in the north-eastern Siberian treeline ecotone (lower Kolyma River region), an insufficiently researched region. Stand structure of Larix cajanderi Mayr was studied at seven sites impacted by disturbances. Maximum tree age ranged from 44 to 300 years. Young to medium-aged stands had, independent of disturbance type, the highest stand densities with over 4000 larch trees per ha. These sites also had the highest growth rates for tree height and stem diameter. Overall lowest stand densities were found in a polygonal field at the northern end of the study area, with larches growing in distinct " tree islands". At all sites, saplings are significantly clustered. Differences in fire severity led to contrasting stand structures with respect to tree, recruit, and overall stand densities. While a low severity fire resulted in low-density stands with high proportions of small and young larches, high severity fires resulted in high-density stands with high proportions of big trees. At waterdisturbed sites, stand structure varied between waterlogged and drained sites and latitude. These mixed effects of climate and disturbance make it difficult to predict future stand characteristics and the treeline position. KW - treeline KW - Larix cajanderi KW - Siberia KW - fire KW - stand structure Y1 - 2017 U6 - https://doi.org/10.14214/sf.1666 SN - 0037-5330 SN - 2242-4075 VL - 51 IS - 3 PB - The Finnish Society of Forest Science CY - Helsinki ER - TY - JOUR A1 - Wieczorek, Mareike A1 - Kruse, Stefan A1 - Epp, Laura Saskia A1 - Kolmogorov, Alexei A1 - Nikolaev, Anatoly N. A1 - Heinrich, Ingo A1 - Jeltsch, Florian A1 - Pestryakova, Luidmila Agafyevna A1 - Zibulski, Romy A1 - Herzschuh, Ulrike T1 - Dissimilar responses of larch stands in northern Siberia to increasing temperatures-a field and simulation based study JF - Ecology : a publication of the Ecological Society of America N2 - Arctic and alpine treelines worldwide differ in their reactions to climate change. A northward advance of or densification within the treeline ecotone will likely influence climate-vegetation feedback mechanisms. In our study, which was conducted in the Taimyr Depression in the North Siberian Lowlands, w present a combined field-and model-based approach helping us to better understand the population processes involved in the responses of the whole treeline ecotone, spanning from closed forest to single-tree tundra, to climate warming. Using information on stand structure, tree age, and seed quality and quantity from seven sites, we investigate effects of intra-specific competition and seed availability on the specific impact of recent climate warming on larch stands. Field data show that tree density is highest in the forest-tundra, and average tree size decreases from closed forest to single-tree tundra. Age-structure analyses indicate that the trees in the closed forest and forest-tundra have been present for at least similar to 240 yr. At all sites except the most southerly ones, past establishment is positively correlated with regional temperature increase. In the single-tree tundra, however, a change in growth form from krummholz to erect trees, beginning similar to 130 yr ago, rather than establishment date has been recorded. Seed mass decreases from south to north, while seed quantity increases. Simulations with LAVESI (Larix Vegetation Simulator) further suggest that relative density changes strongly in response to a warming signal in the forest-tundra while intra-specific competition limits densification in the closed forest and seed limitation hinders densification in the single-tree tundra. We find striking differences in strength and timing of responses to recent climate warming. While forest-tundra stands recently densified, recruitment is almost non-existent at the southern and northern end of the ecotone due to autecological processes. Palaeo-treelines may therefore be inappropriate to infer past temperature changes at a fine scale. Moreover, a lagged treeline response to past warming will, via feedback mechanisms, influence climate change in the future. KW - climate change KW - closed forest KW - dendroecology KW - forest change KW - latitude KW - recruitment KW - tundra KW - vegetation model Y1 - 2017 U6 - https://doi.org/10.1002/ecy.1887 SN - 0012-9658 SN - 1939-9170 VL - 98 SP - 2343 EP - 2355 PB - Wiley CY - Hoboken ER - TY - THES A1 - Wolf, Julia T1 - Schadenserkennung in Beton durch Überwachung mit eingebetteten Ultraschallprüfköpfen T1 - Monitoring with embedded ultrasound sensors to detect damage in concrete N2 - Die zerstörungsfreien Prüfungen von Bauwerken mit Hilfe von Ultraschallmessverfahren haben in den letzten Jahren an Bedeutung gewonnen. Durch Ultraschallmessungen können die Geometrien von Bauteilen bestimmt sowie von außen nicht sichtbare Fehler wie Delaminationen und Kiesnester erkannt werden. Mit neuartigen, in das Betonbauteil eingebetteten Ultraschallprüfköpfen sollen nun Bauwerke dauerhaft auf Veränderungen überprüft werden. Dazu werden Ultraschallsignale direkt im Inneren eines Bauteils erzeugt, was die Möglichkeiten der herkömmlichen Methoden der Bauwerksüberwachung wesentlich erweitert. Ein Ultraschallverfahren könnte mit eingebetteten Prüfköpfen ein Betonbauteil kontinuierlich integral überwachen und damit auch stetig fortschreitende Gefügeänderungen, wie beispielsweise Mikrorisse, registrieren. Sicherheitsrelevante Bauteile, die nach dem Einbau für Messungen unzugänglich oder mittels Ultraschall, beispielsweise durch zusätzliche Beschichtungen der Oberfläche, nicht prüfbar sind, lassen sich mit eingebetteten Prüfköpfen überwachen. An bereits vorhandenen Bauwerken können die Ultraschallprüfköpfe mithilfe von Bohrlöchern und speziellem Verpressmörtel auch nachträglich in das Bauteil integriert werden. Für Fertigbauteile bieten sich eingebettete Prüfköpfe zur Herstellungskontrolle sowie zur Überwachung der Baudurchführung als Werkzeug der Qualitätssicherung an. Auch die schnelle Schadensanalyse eines Bauwerks nach Naturkatastrophen, wie beispielsweise einem Erdbeben oder einer Flut, ist denkbar. Durch die gute Ankopplung ermöglichen diese neuartigen Prüfköpfe den Einsatz von empfindlichen Auswertungsmethoden, wie die Kreuzkorrelation, die Coda-Wellen-Interferometrie oder die Amplitudenauswertung, für die Signalanalyse. Bei regelmäßigen Messungen können somit sich anbahnende Schäden eines Bauwerks frühzeitig erkannt werden. Da die Schädigung eines Bauwerks keine direkt messbare Größe darstellt, erfordert eine eindeutige Schadenserkennung in der Regel die Messung mehrerer physikalischer Größen die geeignet verknüpft werden. Physikalische Größen können sein: Ultraschalllaufzeit, Amplitude des Ultraschallsignals und Umgebungstemperatur. Dazu müssen Korrelationen zwischen dem Zustand des Bauwerks, den Umgebungsbedingungen und den Parametern des gemessenen Ultraschallsignals untersucht werden. In dieser Arbeit werden die neuartigen Prüfköpfe vorgestellt. Es wird beschrieben, dass sie sich, sowohl in bereits errichtete Betonbauwerke als auch in der Konstruktion befindliche, einbauen lassen. Experimentell wird gezeigt, dass die Prüfköpfe in mehreren Ebenen eingebettet sein können da ihre Abstrahlcharakteristik im Beton nahezu ungerichtet ist. Die Mittenfrequenz von rund 62 kHz ermöglicht Abstände, je nach Betonart und SRV, von mindestens 3 m zwischen Prüfköpfen die als Sender und Empfänger arbeiten. Die Empfindlichkeit der eingebetteten Prüfköpfe gegenüber Veränderungen im Beton wird an Hand von zwei Laborexperimenten gezeigt, einem Drei-Punkt-Biegeversuch und einem Versuch zur Erzeugung von Frost-Tau-Wechsel Schäden. Die Ergebnisse werden mit anderen zerstörungsfreien Prüfverfahren verglichen. Es zeigt sich, dass die Prüfköpfe durch die Anwendung empfindlicher Auswertemethoden, auftretende Risse im Beton detektieren, bevor diese eine Gefahr für das Bauwerk darstellen. Abschließend werden Beispiele von Installation der neuartigen Ultraschallprüfköpfe in realen Bauteilen, zwei Brücken und einem Fundament, gezeigt und basierend auf dort gewonnenen ersten Erfahrungen ein Konzept für die Umsetzung einer Langzeitüberwachung aufgestellt. N2 - The non-destructive testing of concrete structures with the ultrasound method has become increasingly important in recent years. With the ultrasound technique the geometry of concrete elements can be determined and defects can be detected which are not visible on the surface, such as delaminations and honeycombs. New ultrasound sensors were developed to monitor changes in concrete structures continuously and permanently. Those ultrasound sensors will be embedded into the concrete to transmit and receive ultrasound waves within the structure. This allows a new interpretation of the condition of a structure. The use of the embedded sensors expands the options of the traditional monitoring methods. The ultrasonic technique could monitor a voluminous part of a concrete structure continuously and integral with just a few strategically placed embedded ultrasound sensors and thus register small changes in the concretes texture. Vital parts of concrete structures which are inaccessible for the ultrasonic method after construction can be monitored with embedded sensors. Inaccessibility could be caused by a surface layered with a medium reflecting or absorbing the ultrasonic wave or by to much steel obstruct"-ing the waves path. The sensors can be embedded into existing structures using boreholes and grouting mortar or installed during construction and can thus serve as a tool for quality control. The quick damage evaluation of a construction after a natural disaster such as an earthquake or a flood, is conceivable as well. As the contact between the embedded sensors and the surrounding concrete is assumed as constant over a long time, highly sensitive signal evaluation tools, such as the cross correlation between signals, the Coda Wave Interferometry and the amplitude evaluation, can be used. Therefore, with regular measurements, damage in a construction can be detected at an early stage. But, the damage of a structure can not be measured directly. A distinct damage detection needs a quantity of measured parameters, such as time of flight and amplitude of the ultrasonic wave as well as temperature, which need to be linked to each other. To achieve this, correlations between the state of the concrete construction and those parameters of the measured ultrasonic signal must be investigated. In this work the newly developed ultrasound sensors are introduced. Their installation into a concrete structure is described. The sensors sensitivity to small changes in the concrete is investigated and compared to other Non Destructive Testing (NDT) methods. The highly sensitive signal evaluation tools proof to be particularly advantageous when using embedded sensors. Installations of embedded ultrasound sensors for long time monitoring of real constructions are presented. Based on the gained experience with those installations a concept is presented for the set up of a long time monitoring system. KW - Ultraschall KW - Beton KW - Überwachung KW - Prüfköpfe KW - Temperatur KW - Frost-Tau-Wechsel KW - Schaden KW - Riss KW - ultrasound KW - concrete KW - monitoring KW - sensors KW - temperature KW - Freeze-Thaw-Cycles KW - damage KW - crack Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-397363 ER - TY - JOUR A1 - Wolter, Juliane A1 - Lantuit, Hugues A1 - Herzschuh, Ulrike A1 - Stettner, Samuel A1 - Fritz, Michael T1 - Tundra vegetation stability versus lake-basin variability on the Yukon Coastal Plain (NW Canada) during the past three centuries JF - The Holocene : an interdisciplinary journal focusing on recent environmental change KW - pollen Y1 - 2017 U6 - https://doi.org/10.1177/0959683617708441 SN - 0959-6836 SN - 1477-0911 VL - 27 SP - 1846 EP - 1858 PB - Sage Publ. CY - London ER - TY - JOUR A1 - Zhilich, Snezhana A1 - Rudaya, Natalia A1 - Krivonogov, Sergei A1 - Nazarova, Larisa B. A1 - Pozdnyakov, Dmitry T1 - Environmental dynamics of the Baraba forest-steppe (Siberia) over the last 8000 years and their impact on the types of economic life of the population JF - Quaternary science reviews : the international multidisciplinary research and review journal N2 - This article offers a reconstruction of the vegetation and climate of the south-western Siberian Baraba forest-steppe area during the last ca. 8000 years. The analysis of palynological data from the sediment core of Lake Bolshie Toroki using quantitative methods has made it possible to reconstruct changes of the dominant types of vegetation and mean July air temperatures. Coniferous forests grew in the vicinity of the lake, and mean July air temperatures were similar to present-day ones between 7.9 and 7.0 kyr BP. The warmest and driest climate occurred at 7.0-5.0 kyr BP. At that time, the region had open steppe landscapes; birch groves began to spread. A cooling trend is seen after 5.5 kyr BP, when forest-steppe began to emerge. Steppe communities started to dominate again after 1.5 kyr BP. Mean July air temperatures lower than now are reconstructed for the period of 1.9-1 kyr BP, and then the temperatures became similar to present-day ones. Comparing the archaeological data on the types of economy of the population which inhabited the Baraba forest-steppe with the data on changes in the natural environment revealed a connection between the gradual transition from hunting and fishing to livestock breeding and the development of forest-steppe landscapes with a decrease in the area covered by forests. The development of the forest-steppe as an ecotonic landscape starting around 5 kyr BP might have contributed to the coexistence of several archaeological cultures with different types of economy on the same territory. (C) 2017 Elsevier Ltd. All rights reserved. KW - Holocene KW - Climate dynamics KW - Russia KW - Vegetation dynamics KW - Baraba forest-steppe KW - Archaeology KW - Transfer function Y1 - 2017 U6 - https://doi.org/10.1016/j.quascirev.2017.03.022 SN - 0277-3791 VL - 163 SP - 152 EP - 161 PB - Elsevier CY - Oxford ER - TY - THES A1 - Zhou, Bin T1 - On the assessment of surface urban heat island T1 - Bewertung des urbanen Hitzeinseleffekts BT - size, urban form, and seasonality BT - Stadtgröße, Stadtform, und Seasonalität N2 - Inwiefern Städte unter den Megatrends der Urbanisierung und des Klimawandels nachhaltig gestaltet werden können, bleibt umstritten. Dies ist zum Teil auf unzureichende Kenntnisse der Mensch-Umwelt-Interaktionen zurückzuführen. Als die am vollständigsten dokumentierte anthropogene Klimamodifikation ruft der Urbane Hitzeinsel (UHI) Effekt weltweit Sorgen hinsichtlich der Gesundheit der Bevölkerung hervor. Dazu kommt noch ein immer häufigeres und intensiveres Auftreten von Hitzewellen, wodurch das Wohlbefinden der Stadtbewohner weiter beeinträchtigt wird. Trotz eines deutlichen Anstiegs der Zahl der UHI-bezogenen Veröffentlichungen in den letzten Jahrzehnten haben die unterschiedlichen Definitionen von städtischen und ländlichen Gebieten in bisherigen Studien die allgemeine Vergleichbarkeit der Resultate stark erschwert. Darüber hinaus haben nur wenige Studien den UHI-Effekt und seine Einflussfaktoren anhand einer Kombination der Landnutzungsdaten und der thermischen Fernerkundung systematisch untersucht. Diese Arbeit stellt einen allgemeinen Rahmen zur Quantifizierung von UHI-Intensitäten mittels eines automatisierten Algorithmus vor, wobei Städte als Agglomerationen maximal räumlicher Kontinuität basierend auf Landnutzungsdaten identifiziert, sowie deren ländliche Umfelder analog definiert werden. Durch Verknüpfung der Landnutzungsdaten mit Landoberflächentemperaturen von Satelliten kann die UHI-Intensität robust und konsistent berechnet werden. Anhand dieser Innovation wurde nicht nur der Zusammenhang zwischen Stadtgröße und UHI-Intensität erneut untersucht, sondern auch die Auswirkungen der Stadtform auf die UHI-Intensität quantifiziert. Diese Arbeit leistet vielfältige Beiträge zum tieferen Verständnis des UHI-Phänomens. Erstens wurde eine log-lineare Beziehung zwischen UHI-Intensität und Stadtgröße unter Berücksichtigung der 5,000 europäischen Städte bestätigt. Werden kleinere Städte auch berücksichtigt, ergibt sich eine log-logistische Beziehung. Zweitens besteht ein komplexes Zusammenspiel zwischen der Stadtform und der UHI-Intensität: die Stadtgröße stellt den stärksten Einfluss auf die UHI-Intensität dar, gefolgt von der fraktalen Dimension und der Anisometrie. Allerdings zeigen ihre relativen Beiträge zur UHI-Intensität eine regionale Heterogenität, welche die Bedeutung räumlicher Muster während der Umsetzung von UHI-Anpassungsmaßnahmen hervorhebt. Des Weiteren ergibt sich eine neue Saisonalität der UHI-Intensität für individuelle Städte in Form von Hysteresekurven, die eine Phasenverschiebung zwischen den Zeitreihen der UHI-Intensität und der Hintergrundtemperatur andeutet. Diese Saisonalität wurde anhand von Luft- und Landoberflächentemperaturen untersucht, indem die Satellitenbeobachtung und die Modellierung der urbanen Grenzschicht mittels des UrbClim-Modells kombiniert wurden. Am Beispiel von London ist die Diskrepanz der Saisonalitäten zwischen den beiden Temperaturen vor allem auf die mit der einfallenden Sonnenstrahlung verbundene Besonderheit der Landoberflächentemperatur zurückzuführen. Darüber hinaus spielt das regionale Klima eine wichtige Rolle bei der Entwicklung der UHI. Diese Arbeit ist eine der ersten Studien dieser Art, die eine systematische und statistische Untersuchung des UHI-Effektes ermöglicht. Die Ergebnisse sind von besonderer Bedeutung für die allgemeine räumliche Planung und Regulierung auf Meso- und Makroebenen, damit sich Vorteile der rapiden Urbanisierung nutzbar machen und zeitgleich die folgende Hitzebelastung proaktiv vermindern lassen. N2 - To what extent cities can be made sustainable under the mega-trends of urbanization and climate change remains a matter of unresolved scientific debate. Our inability in answering this question lies partly in the deficient knowledge regarding pivotal humanenvironment interactions. Regarded as the most well documented anthropogenic climate modification, the urban heat island (UHI) effect – the warmth of urban areas relative to the rural hinterland – has raised great public health concerns globally. Worse still, heat waves are being observed and are projected to increase in both frequency and intensity, which further impairs the well-being of urban dwellers. Albeit with a substantial increase in the number of publications on UHI in the recent decades, the diverse urban-rural definitions applied in previous studies have remarkably hampered the general comparability of results achieved. In addition, few studies have attempted to synergize the land use data and thermal remote sensing to systematically assess UHI and its contributing factors. Given these research gaps, this work presents a general framework to systematically quantify the UHI effect based on an automated algorithm, whereby cities are defined as clusters of maximum spatial continuity on the basis of land use data, with their rural hinterland being defined analogously. By combining land use data with spatially explicit surface skin temperatures from satellites, the surface UHI intensity can be calculated in a consistent and robust manner. This facilitates monitoring, benchmarking, and categorizing UHI intensities for cities across scales. In light of this innovation, the relationship between city size and UHI intensity has been investigated, as well as the contributions of urban form indicators to the UHI intensity. This work delivers manifold contributions to the understanding of the UHI, which have complemented and advanced a number of previous studies. Firstly, a log-linear relationship between surface UHI intensity and city size has been confirmed among the 5,000 European cities. The relationship can be extended to a log-logistic one, when taking a wider range of small-sized cities into account. Secondly, this work reveals a complex interplay between UHI intensity and urban form. City size is found to have the strongest influence on the UHI intensity, followed by the fractality and the anisometry. However, their relative contributions to the surface UHI intensity depict a pronounced regional heterogeneity, indicating the importance of considering spatial patterns of UHI while implementing UHI adaptation measures. Lastly, this work presents a novel seasonality of the UHI intensity for individual clusters in the form of hysteresis-like curves, implying a phase shift between the time series of UHI intensity and background temperatures. Combining satellite observation and urban boundary layer simulation, the seasonal variations of UHI are assessed from both screen and skin levels. Taking London as an example, this work ascribes the discrepancies between the seasonality observed at different levels mainly to the peculiarities of surface skin temperatures associated with the incoming solar radiation. In addition, the efforts in classifying cities according to their UHI characteristics highlight the important role of regional climates in determining the UHI. This work serves as one of the first studies conducted to systematically and statistically scrutinize the UHI. The outcomes of this work are of particular relevance for the overall spatial planning and regulation at meso- and macro levels in order to harness the benefits of rapid urbanization, while proactively minimizing its ensuing thermal stress. KW - urban heat island effect KW - surface urban heat island effect KW - UHI KW - urban form KW - der Urbane Hitzeinsel Effekt KW - der Städtische Wärmeinseleffekt KW - der Urbane Hitzeinsel Effekt basierend auf Landoberflächentemperatur KW - UHI KW - die Stadtform Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-404383 ER - TY - JOUR A1 - Zhou, Bin A1 - Rybski, Diego A1 - Kropp, Jürgen T1 - The role of city size and urban form in the surface urban heat island JF - Scientific reports N2 - Urban climate is determined by a variety of factors, whose knowledge can help to attenuate heat stress in the context of ongoing urbanization and climate change. We study the influence of city size and urban form on the Urban Heat Island (UHI) phenomenon in Europe and find a complex interplay between UHI intensity and city size, fractality, and anisometry. Due to correlations among these urban factors, interactions in the multi-linear regression need to be taken into account. We find that among the largest 5,000 cities, the UHI intensity increases with the logarithm of the city size and with the fractal dimension, but decreases with the logarithm of the anisometry. Typically, the size has the strongest influence, followed by the compactness, and the smallest is the influence of the degree to which the cities stretch. Accordingly, from the point of view of UHI alleviation, small, disperse, and stretched cities are preferable. However, such recommendations need to be balanced against e.g. positive agglomeration effects of large cities. Therefore, trade-offs must be made regarding local and global aims. Y1 - 2017 U6 - https://doi.org/10.1038/s41598-017-04242-2 SN - 2045-2322 VL - 7 PB - Nature Publ. Group CY - London ER - TY - THES A1 - Ziegler, Moritz O. T1 - The 3D in-situ stress field and its changes in geothermal reservoirs T1 - Das 3D in-situ Spannungsfeld und seine Änderungen in Geothermiereservoiren N2 - Information on the contemporary in-situ stress state of the earth’s crust is essential for geotechnical applications and physics-based seismic hazard assessment. Yet, stress data records for a data point are incomplete and their availability is usually not dense enough to allow conclusive statements. This demands a thorough examination of the in-situ stress field which is achieved by 3D geomechanicalnumerical models. However, the models spatial resolution is limited and the resulting local stress state is subject to large uncertainties that confine the significance of the findings. In addition, temporal variations of the in-situ stress field are naturally or anthropogenically induced. In my thesis I address these challenges in three manuscripts that investigate (1) the current crustal stress field orientation, (2) the 3D geomechanical-numerical modelling of the in-situ stress state, and (3) the phenomenon of injection induced temporal stress tensor rotations. In the first manuscript I present the first comprehensive stress data compilation of Iceland with 495 data records. Therefore, I analysed image logs from 57 boreholes in Iceland for indicators of the orientation of the maximum horizontal stress component. The study is the first stress survey from different kinds of stress indicators in a geologically very young and tectonically active area of an onshore spreading ridge. It reveals a distinct stress field with a depth independent stress orientation even very close to the spreading centre. In the second manuscript I present a calibrated 3D geomechanical-numerical modelling approach of the in-situ stress state of the Bavarian Molasse Basin that investigates the regional (70x70x10km³) and local (10x10x10km³) stress state. To link these two models I develop a multi-stage modelling approach that provides a reliable and efficient method to derive from the larger scale model initial and boundary conditions for the smaller scale model. Furthermore, I quantify the uncertainties in the models results which are inherent to geomechanical-numerical modelling in general and the multi-stage approach in particular. I show that the significance of the models results is mainly reduced due to the uncertainties in the material properties and the low number of available stress magnitude data records for calibration. In the third manuscript I investigate the phenomenon of injection induced temporal stress tensor rotation and its controlling factors. I conduct a sensitivity study with a 3D generic thermo-hydro-mechanical model. I show that the key control factors for the stress tensor rotation are the permeability as the decisive factor, the injection rate, and the initial differential stress. In particular for enhanced geothermal systems with a low permeability large rotations of the stress tensor are indicated. According to these findings the estimation of the initial differential stress in a reservoir is possible provided the permeability is known and the angle of stress rotation is observed. I propose that the stress tensor rotations can be a key factor in terms of the potential for induced seismicity on pre-existing faults due to the reorientation of the stress field that changes the optimal orientation of faults. N2 - Kenntnis des derzeitigen in-situ Spannungszustandes der Erdkruste ist essenziell für geotechnische Anwendungen und seismische Gefährdungsabschätzungen, welche auf physikalischen Beobachtungen basieren. Jedoch sind die Spannungsinformationen jedes Datenpunktes unvollständig und die Menge an vorhandenen Datenpunkten ist normalerweise nicht groß genug, um schlüssige Ergebnisse zu erzielen. Daher ist eine eingehende Untersuchung des in-situ Spannungsfeldes, welche durch 3D geomechanisch-numerische Modellierung geleistet wird, erforderlich. Jedoch ist die räumliche Auflösung der Modelle begrenzt und der resultierende Spannungszustand ist großen Unsicherheiten unterworfen, welche die Aussagekraft der Ergebnisse beschränken. Zusätzlich gibt es zeitliche Änderungen des Spannungsfeldes, welche durch natürliche Prozesse bedingt oder menschengemacht sind. In meiner Dissertation behandle ich diese Herausforderungen in drei Manuskripten, welche (1) die Orientierung des derzeitigen Spannungszustandes, (2) die 3D geomechanisch-numerische Modellierung des in-situ Spannungszustandes und (3) das Phänomen injektionsinduzierter zeitlicher Rotationen des Spannungstensors zum Thema haben. In dem ersten Manuskript präsentiere ich die erste umfassende Spannungsdatensammlung von Island mit insgesamt 495 Einträgen. Dafür habe ich Bilddatenlogs aus 57 Bohrlöchern in Island auf Indikatoren der maximalen horizontalen Spannungsorientierung hin untersucht. Diese Studie ist die erste ganzheitliche Spannungsuntersuchung, welche sich auf verschiedene Indikatoren der Spannungsorientierung stützt und in einem geologisch sehr jungen und tektonisch aktiven Gebiet auf einem Mittelozeanischen Rücken an Land liegt. Es zeigt sich, dass selbst sehr nahe an der Plattengrenze eine tiefenunabhängige, eindeutige Spannungsorientierung existiert. In dem zweiten Manuskript präsentiere ich einen kalibrierten 3D geomechanisch-numerischen Modellierungsansatz des in-situ Spannungszustandes des bayrischen Molassebeckens welches den regionalen (70x70x10km³) und den lokalen (10x10x10km³) Spannungszustand untersucht. Um diese zwei Modelle zu verbinden, habe ich ein mehrstufigen Modellansatz entworfen, welcher eine zuverlässige und effiziente Methode darstellt um Randbedingungen und Initialbedingungen für das kleinere Modell aus dem größeren Modell abzuleiten. Des Weiteren quantifiziere ich die Unsicherheiten in den Modellergebnissen, welche im Allgemeinen durch geomechanisch-numerische Modellierung und im Speziellen durch den Mehrstufenansatz entstehen. Ich zeige, dass die Signifikanz der Modellergebnisse hauptsächlich durch die Unsicherheiten in den Materialeigenschaften sowie der geringen Anzahl vorhandener Spannungsmagnitudendaten zur Kalibrierung reduziert wird. In dem dritten Manuskript untersuche ich das Phänomen injektionsinduzierter zeitlicher Rotationen des Spannungstensors und deren kontrollierende Parameter. Ich führe eine Sensitivitätsanalyse mit einem generischen 3D thermo-hydro-mechanischen Modell durch. Darin zeige ich, dass die Schlüsselparameter, welche die Rotationen des Spannungstensors kontrollieren, die Permeabilität des Reservoirgesteins als der entscheidende Faktor, die Injektionsrate und die initiale Differenzspannung sind. Insbesondere für geothermische Systeme nach dem Hot-Dry-Rock-Verfahren mit einer geringen Permeabilität weisen die Ergebnisse auf große Rotationen des Spannungstensors hin. Gemäß diesen Ergebnissen kann die initiale Differenzspannung in einem Reservoir abgeschätzt werden, sollte die Permeabilität bekannt sein und der Winkel der Spannungsrotation beobachtet werden. Ich schlage vor, dass Spannungsrotationen ein Schlüsselfaktor in Bezug auf das Potenzial für induzierte Seismizität sind, welche auf prä-existierenden Störungen entsteht, die durch die Reorientierung des Spannungsfeldes optimal orientiert werden. KW - stress KW - stress changes KW - induced seismicity KW - geothermal KW - geomechanical modelling KW - Spannung KW - Spannungsänderungen KW - induzierte Seismizität KW - Geothermie KW - geomechanische Modellierung Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-403838 ER - TY - JOUR A1 - Ziegler, Moritz O. A1 - Heidbach, Oliver A1 - Zang, Arno A1 - Martinez-Garzon, Patricia A1 - Bohnhoff, Marco T1 - Estimation of the differential stress from the stress rotation angle in low permeable rock JF - Geophysical research letters N2 - Rotations of the principal stress axes are observed as a result of fluid injection into reservoirs. We use a generic, fully coupled 3-D thermo-hydro-mechanical model to investigate systematically the dependence of this stress rotation on different reservoir properties and injection scenarios. We find that permeability, injection rate, and initial differential stress are the key factors, while other reservoir properties only play a negligible role. In particular, we find that thermal effects do not significantly contribute to stress rotations. For reservoir types with usual differential stress and reservoir treatment the occurrence of significant stress rotations is limited to reservoirs with a permeability of less than approximately 10(-12)m(2). Higher permeability effectively prevents stress rotations to occur. Thus, according to these general findings, the observed principal stress axes rotation can be used as a proxy of the initial differential stress provided that rock permeability and fluid injection rate are known a priori. Y1 - 2017 U6 - https://doi.org/10.1002/2017GL073598 SN - 0094-8276 SN - 1944-8007 VL - 44 SP - 6761 EP - 6770 PB - American Geophysical Union CY - Washington ER - TY - JOUR A1 - Zimmermann, Heike Hildegard A1 - Raschke, Elena A1 - Epp, Laura Saskia A1 - Stoof-Leichsenring, Kathleen Rosemarie A1 - Schwamborn, Georg A1 - Schirrmeister, Lutz A1 - Overduin, Pier Paul A1 - Herzschuh, Ulrike T1 - Sedimentary ancient DNA and pollen reveal the composition of plant organic matter in Late Quaternary permafrost sediments of the Buor Khaya Peninsula (north-eastern Siberia) JF - Biogeosciences N2 - Organic matter deposited in ancient, ice-rich permafrost sediments is vulnerable to climate change and may contribute to the future release of greenhouse gases; it is thus important to get a better characterization of the plant organic matter within such sediments. From a Late Quaternary permafrost sediment core from the Buor Khaya Peninsula, we analysed plant-derived sedimentary ancient DNA (sedaDNA) to identify the taxonomic composition of plant organic matter, and undertook palynological analysis to assess the environmental conditions during deposition. Using sedaDNA, we identified 154 taxa and from pollen and non-pollen palynomorphs we identified 83 taxa. In the deposits dated between 54 and 51 kyr BP, sedaDNA records a diverse low-centred polygon plant community including recurring aquatic pond vegetation while from the pollen record we infer terrestrial open-land vegetation with relatively dry environmental conditions at a regional scale. A fluctuating dominance of either terrestrial or swamp and aquatic taxa in both proxies allowed the local hydrological development of the polygon to be traced. In deposits dated between 11.4 and 9.7 kyr BP (13.4-11.1 cal kyr BP), sedaDNA shows a taxonomic turnover to moist shrub tundra and a lower taxonomic richness compared to the older samples. Pollen also records a shrub tundra community, mostly seen as changes in relative proportions of the most dominant taxa, while a decrease in taxonomic richness was less pronounced compared to sedaDNA. Our results show the advantages of using sedaDNA in combination with palynological analyses when macrofossils are rarely preserved. The high resolution of the sedaDNA record provides a detailed picture of the taxonomic composition of plant-derived organic matter throughout the core, and palynological analyses prove valuable by allowing for inferences of regional environmental conditions. Y1 - 2017 U6 - https://doi.org/10.5194/bg-14-575-2017 SN - 1726-4170 SN - 1726-4189 VL - 14 IS - 3 SP - 575 EP - 596 PB - Copernicus CY - Göttingen ER - TY - GEN A1 - Zöller, Gert T1 - Comment on "Estimation of Earthquake Hazard Parameters from Incomplete Data Files. Part III. Incorporation of Uncertainty of Earthquake-Occurrence Model" by Andrzej Kijko, Ansie Smit, and Markvard A. Sellevoll T2 - Bulletin of the Seismological Society of America N2 - Kijko et al. (2016) present various methods to estimate parameters that are relevant for probabilistic seismic-hazard assessment. One of these parameters, although not the most influential, is the maximum possible earthquake magnitude m(max). I show that the proposed estimation of m(max) is based on an erroneous equation related to a misuse of the estimator in Cooke (1979) and leads to unstable results. So far, reported finite estimations of m(max) arise from data selection, because the estimator in Kijko et al. (2016) diverges with finite probability. This finding is independent of the assumed distribution of earthquake magnitudes. For the specific choice of the doubly truncated Gutenberg-Richter distribution, I illustrate the problems by deriving explicit equations. Finally, I conclude that point estimators are generally not a suitable approach to constrain m(max). Y1 - 2017 U6 - https://doi.org/10.1785/0120160193 SN - 0037-1106 SN - 1943-3573 VL - 107 SP - 1975 EP - 1978 PB - Seismological Society of America CY - Albany ER -