TY - JOUR A1 - Silverii, Francesca A1 - Maccaferri, Francesco A1 - Richter, Gudrun A1 - Gonzalez Cansado, Borja A1 - Wang, Rongjiang A1 - Hainzl, Sebastian A1 - Dahm, Torsten T1 - Poroelastic model in a vertically sealed gas storage BT - a case study from cyclic injection/production in a carbonate aquifer JF - Geophysical journal international / the Royal Astronomical Society, the Deutsche Geophysikalische Gesellschaft and the European Geophysical Society N2 - Natural gas can be temporarily stored in a variety of underground facilities, such as depleted gas and oil fields, natural aquifers and caverns in salt rocks. Being extensively monitored during operations, these systems provide a favourable opportunity to investigate how pressure varies in time and space and possibly induces/triggers earthquakes on nearby faults. Elaborate and detailed numerical modelling techniques are often applied to study gas reservoirs. Here we show the possibilities and discuss the limitations of a flexible and easily formulated tool that can be straightforwardly applied to simulate temporal pore-pressure variations and study the relation with recorded microseismic events. We use the software POEL (POroELastic diffusion and deformation) which computes the poroelastic response to fluid injection/extraction in a horizontally layered poroelastic structure. We further develop its application to address the presence of vertical impermeable faults bounding the reservoir and of multiple injection/extraction sources. Exploiting available information on the reservoir geometry and physical parameters, and records of injection/extraction rates for a gas reservoir in southern Europe, we perform an extensive parametric study considering different model configurations. Comparing modelled spatiotemporal pore-pressure variations with in situ measurements, we show that the inclusion of vertical impermeable faults provides an improvement in reproducing the observations and results in pore-pressure accumulation near the faults and in a variation of the temporal pore-pressure diffusion pattern. To study the relation between gas storage activity and recorded local microseismicity, we applied different seismicity models based on the estimated porepressure distribution. This analysis helps to understand the spatial distribution of seismicity and its temporal modulation. The results show that the observed microseismicity could be partly linked to the storage activity, but the contribution of tectonic background seismicity cannot be excluded. KW - Permeability and porosity KW - Gas and hydrate systems KW - Europe KW - Induced KW - seismicity Y1 - 2021 U6 - https://doi.org/10.1093/gji/ggab268 SN - 0956-540X SN - 1365-246X VL - 227 IS - 2 SP - 1322 EP - 1338 PB - Oxford Univ. Press CY - Oxford ER - TY - JOUR A1 - Richter, Gudrun A1 - Wassermann, Jürgen A1 - Zimmer, Martin A1 - Ohrnberger, Matthias T1 - Correlation of seismic activity and fumarole temperature at the Mt. Merapi volcano (Indonesia) in 2000 N2 - In this paper we present densely sampled fumarole temperature data, recorded continuously at a high-temperature fumarole of Mt. Merapi volcano (Indonesia). These temperature time series are correlated with continuous records of rainfall and seismic waveform data collected at the Indonesian - German multi-parameter monitoring network. The correlation analysis of fumarole temperature and precipitation data shows a clear influence of tropical rain events on fumarole temperature. In addition, there is some evidence that rainfall may influence seismicity rates, indicating interaction of meteoric water with the volcanic system. Knowledge about such interactions is important, as lava dome instabilities caused by heavy-precipitation events may result in pyroclastic flows. Apart from the strong external influences on fumarole temperature and seismicity rate, which may conceal smaller signals caused by volcanic degassing processes, the analysis of fumarole temperature and seismic data indicates a statistically significant correlation between a certain type of seismic activity and an increase in fumarole temperature. This certain type of seismic activity consists of a seismic cluster of several high-frequency transients and an ultra-long-period signal (< 0.002 Hz), which are best observed using a broadband seismometer deployed at a distance of 600 m from the active lava dome. The corresponding change in fumarole temperature starts a few minutes after the ultra-long-period signal and simultaneously with the high-frequency seismic cluster. The change in fumarole temperature, an increase of 5 degreesC on average, resembles a smoothed step. Fifty-four occurrences of simultaneous high-frequency seismic cluster, ultra-long period signal and increase of fumarole temperature have been identified in the data set from August 2000 to January 2001. The observed signals appear to correspond to degassing processes in the summit region of Mt. Merapi. (C) 2004 Elsevier B.V. All rights reserved Y1 - 2004 UR - http://www.sciencedirect.com/science/journal/03770273 U6 - https://doi.org/10.1016/j.jvolgeores.2004.03.006 SN - 0377-0273 ER - TY - JOUR A1 - Richter, Gudrun A1 - Hainzl, Sebastian A1 - Dahm, Torsten A1 - Zöller, Gert T1 - Stress-based, statistical modeling of the induced seismicity at the Groningen gas field BT - the Netherlands JF - Environmental earth sciences N2 - Groningen is the largest onshore gas field under production in Europe. The pressure depletion of the gas field started in 1963. In 1991, the first induced micro-earthquakes have been located at reservoir level with increasing rates in the following decades. Most of these events are of magnitude less than 2.0 and cannot be felt. However, maximum observed magnitudes continuously increased over the years until the largest, significant event with ML=3.6 was recorded in 2014, which finally led to the decision to reduce the production. This causal sequence displays the crucial role of understanding and modeling the relation between production and induced seismicity for economic planing and hazard assessment. Here we test whether the induced seismicity related to gas exploration can be modeled by the statistical response of fault networks with rate-and-state-dependent frictional behavior. We use the long and complete local seismic catalog and additionally detailed information on production-induced changes at the reservoir level to test different seismicity models. Both the changes of the fluid pressure and of the reservoir compaction are tested as input to approximate the Coulomb stress changes. We find that the rate-and-state model with a constant tectonic background seismicity rate can reproduce the observed long delay of the seismicity onset. In contrast, so-called Coulomb failure models with instantaneous earthquake nucleation need to assume that all faults are initially far from a critical state of stress to explain the delay. Our rate-and-state model based on the fluid pore pressure fits the spatiotemporal pattern of the seismicity best, where the fit further improves by taking the fault density and orientation into account. Despite its simplicity with only three free parameters, the rate-and-state model can reproduce the main statistical features of the observed activity. KW - induced seismicity KW - modeling KW - statistical seismology KW - forecast Y1 - 2020 U6 - https://doi.org/10.1007/s12665-020-08941-4 SN - 1866-6280 SN - 1866-6299 VL - 79 IS - 11 PB - Springer CY - New York ER - TY - THES A1 - Richter, Gudrun T1 - Temperaturmessungen von Fumarolengasen zur kontinuierlichen Überwachung vulkanischer Aktivität : Analyse und Parametrisierung der Fumarolentemperaturen des Vulkans Merapi Y1 - 2008 CY - Potsdam ER - TY - JOUR A1 - Kühn, Daniela A1 - Hainzl, Sebastian A1 - Dahm, Torsten A1 - Richter, Gudrun A1 - Vera Rodriguez, Ismael T1 - A review of source models to further the understanding of the seismicity of the Groningen field JF - Netherlands journal of geosciences : NJG N2 - The occurrence of felt earthquakes due to gas production in Groningen has initiated numerous studies and model attempts to understand and quantify induced seismicity in this region. The whole bandwidth of available models spans the range from fully deterministic models to purely empirical and stochastic models. In this article, we summarise the most important model approaches, describing their main achievements and limitations. In addition, we discuss remaining open questions and potential future directions of development. KW - deterministic KW - empirical KW - hybrid KW - machine learning KW - seismicity model Y1 - 2022 U6 - https://doi.org/10.1017/njg.2022.7 SN - 0016-7746 SN - 1573-9708 VL - 101 PB - Cambridge Univ. Press CY - Cambridge ER -