TY - JOUR A1 - Söll, Änne A1 - Köstler, Andreas A1 - Krause, Regina A1 - Ludwig, Joachim A1 - Pohlenz, Philipp A1 - Rößler, Dirk A1 - Kirf, Marcel A1 - Klein, Armin A1 - Wagner, Nelli A1 - Angelow, Jürgen T1 - Portal = Pläne vorgelegt: Maßnahmen zur Studienreform BT - Das Potsdamer Universitätsmagazin N2 - Aus dem Inhalt: - Pläne vorgelegt: Maßnahmen zur Studienreform - Fische lügen beim Sex - Käfersammlerin des 21. Jahrhunderts T3 - Portal: Das Potsdamer Universitätsmagazin - 10-12/2008 Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-440162 SN - 1618-6893 IS - 10-12/2008 ER - TY - JOUR A1 - Rößler, Dirk A1 - Rumpker, Georg A1 - Krüger, Frank T1 - Ambiguous moment tensors and radiation patterns in anisotropic media with applications to the modeling of earthquake mechanisms in W-Bohemia N2 - Anisotropic material properties are usually neglected during inversions for source parameters of earthquakes. In general anisotropic media, however, moment tensors for pure-shear sources can exhibit significant non-double-couple components. Such effects may be erroneously interpreted as an indication for volumetric changes at the source. Here we investigate effects of anisotropy on seismic moment tensors and radiation patterns for pure-shear and tensile-type sources. Anisotropy can significantly influence the interpretation of the source mechanisms. For example, the orientation of the slip within the fault plane may affect the total seismic moment. Also, moment tensors due to pure- shear and tensile faulting can have similar characteristics depending on the orientation of the elastic tensor. Furthermore, the tensile nature of an earthquake can be obscured by near-source anisotropic properties. As an application, we consider effects of inhomogeneous anisotropic properties on the seismic moment tensor and the radiation patterns of a selected type of micro-earthquakes observed in W-Bohemia. The combined effects of near-source and along- path anisotropy cause characteristic amplitude distortions of the P, S1 and S2 waves. However, the modeling suggests that neither homogeneous nor inhomogeneous anisotropic properties alone can explain the observed large non-double-couple components. The results also indicate that a correct analysis of the source mechanism, in principle, is achievable by application of anisotropic moment tensor inversion Y1 - 2004 SN - 0039-3169 ER - TY - THES A1 - Rößler, Dirk T1 - Retrieval of earthquake source parameters in inhomogeneous anisotropic mediawith application to swarm events in West Bohemia in 2000 T1 - Bestimmung von Erdbebenparametern in inhomogenen anisotropen Medien mit Anwendung auf Schwarmbeben im Vogtland im Jahr 2000 N2 - Earthquakes form by sudden brittle failure of rock mostly as shear ruptures along a rupture plane. Beside this, mechanisms other than pure shearing have been observed for some earthquakes mainly in volcanic areas. Possible explanations include complex rupture geometries and tensile earthquakes. Tensile earthquakes occur by opening or closure of cracks during rupturing. They are likely to be often connected with fluids that cause pressure changes in the pore space of rocks leading to earthquake triggering. Tensile components have been reported for swarm earthquakes in West Bohemia in 2000. The aim and subject of this work is an assessment and the accurate determination of such tensile components for earthquakes in anisotropic media. Currently used standard techniques for the retrieval of earthquake source mechanisms assume isotropic rock properties. By means of moment tensors, equivalent forces acting at the source are used to explain the radiated wavefield. Conversely, seismic anisotropy, i.e. directional dependence of elastic properties, has been observed in the earth's crust and mantle such as in West Bohemia. In comparison to isotropy, anisotropy causes modifications in wave amplitudes and shear-wave splitting. In this work, effects of seismic anisotropy on true or apparent tensile source components of earthquakes are investigated. In addition, earthquake source parameters are determined considering anisotropy. It is shown that moment tensors and radiation patterns due to shear sources in anisotropic media may be similar to those of tensile sources in isotropic media. In contrast, similarities between tensile earthquakes in anisotropic rocks and shear sources in isotropic media may exist. As a consequence, the interpretation of tensile source components is ambiguous. The effects that are due to anisotropy depend on the orientation of the earthquake source and the degree of anisotropy. The moment of an earthquake is also influenced by anisotropy. The orientation of fault planes can be reliably determined even if isotropy instead of anisotropy is assumed and if the spectra of the compressional waves are used. Greater difficulties may arise when the spectra of split shear waves are additionally included. Retrieved moment tensors show systematic artefacts. Observed tensile source components determined for events in West Bohemia in 1997 can only partly be attributed to the effects of moderate anisotropy. Furthermore, moment tensors determined earlier for earthquakes induced at the German Continental Deep Drilling Program (KTB), Bavaria, were reinterpreted under assumptions of anisotropic rock properties near the borehole. The events can be consistently identified as shear sources, although their moment tensors comprise tensile components that are considered to be apparent. These results emphasise the necessity to consider anisotropy to uniquely determine tensile source parameters. Therefore, a new inversion algorithm has been developed, tested, and successfully applied to 112 earthquakes that occurred during the most recent intense swarm episode in West Bohemia in 2000 at the German-Czech border. Their source mechanisms have been retrieved using isotropic and anisotropic velocity models. Determined local magnitudes are in the range between 1.6 and 3.2. Fault-plane solutions are similar to each other and characterised by left-lateral faulting on steeply dipping, roughly North-South oriented rupture planes. Their dip angles decrease above a depth of about 8.4km. Tensile source components indicating positive volume changes are found for more than 60% of the considered earthquakes. Their size depends on source time and location. They are significant at the beginning of the swarm and at depths below 8.4km but they decrease in importance later in the course of the swarm. Determined principle stress axes include P axes striking Northeast and Taxes striking Southeast. They resemble those found earlier in Central Europe. However, depth-dependence in plunge is observed. Plunge angles of the P axes decrease gradually from 50° towards shallow angles with increasing depth. In contrast, the plunge angles of the T axes change rapidly from about 8° above a depth of 8.4km to 21° below this depth. By this thesis, spatial and temporal variations in tensile source components and stress conditions have been reported for the first time for swarm earthquakes in West Bohemia in 2000. They also persist, when anisotropy is assumed and can be explained by intrusion of fluids into the opened cracks during tensile faulting. N2 - Erdbeben entstehen durch plötzlichen Sprödbruch des Gesteins, meist als Scherbruch entlang einer Bruchfläche. Daneben werden für einige Beben v.a. in vulkanischen Gebieten auch Mechanismen beobachtet, die scheinbar vom Modell des Scherbruches abweichen. Ursachen dafür beinhalten komplexe Bruchgeometrien und tensile Erdbeben. Bei tensilen Erdbeben kommt es während des Bruchs zum Öffnen oder Schließen der Bruchfläche und damit zu Volumenänderungen. Erdbeben mit tensilen Anteilen stehen wahrscheinlich oft im Zusammenhang mit Fluiden, welche zur Durckänderung im Porenraum von Gesteinen und damit zum Auslösen des Bebens führen. Sie wurden auch im Vogtland während eines Erdbebenschwarms im Jahr 1997 beobachtet. Die Beurteilung und sichere Bestimmung tensiler Anteile von Erdbeben sind Ziel und Gegenstand dieser Arbeit. Bei Standardverfahren zur Bestimmung von Erdbebenmechanismen werden isotrope Gesteinseigenschaften angenommen. Momententensoren beschreiben dabei Kräfte, die das abgestrahlte Wellenfeld erklären. Allerdings wird seismische Anisotropie, d.h. Richtungsabhängigkeit elastischer Eigenschaften, in der Erdkruste und im Mantel wie z.B. im Vogtland beobachtet. Anisotropie bewirkt im Vergleich zu isotropen Medien Veränderungen der Wellenamplituden und -polariserungen sowie das Aufspalten von Scherwellen. In der vorliegenden Arbeit werden daher der Einfluss seismischer Anisotropie auf wahre oder scheinbar auftretende tensile Quellanteile untersucht und Erdbebenmechanismen unter Berücksichtigung seismischer Anisotropie bestimmt. Es wird gezeigt, dass Momententensoren und Abstrahlmuster von Scherbrüchen in anisotropen Medien denen von tensilen Brüchen in isotropen Medien ähneln können. Umgekehrt treten Ähnlichkeiten tensiler Beben in anisotropen Gesteinen mit Scherbrüchen in isotropen Medien auf. Damit existieren Mehrdeutigkeiten beobachteter tensiler Quellanteile. Die Effekte von Anisotropie hängen von der Orientierung des Bruches und vom Grad der Anisotropie ab. Außerdem beeinflusst Anisotropie das Moment eines Bebens. Herdflächenorientierungen können auch dann verlässlich bestimmt werden, wenn man Isotropie statt Anisotropie annimmt und die Spektren von Kompressionswellen verwendet. Bei Hinzunahme der Spektren von Scherwellen können Uneindeutigkeiten auftreten. Abgeleitete Momententensoren zeigen systematische Artefakte. Beobachtungen tensiler Quellanteile von Beben im Vogtland im Jahr 1997 können nicht allein durch moderate Anisotropie erklärt werden. Weiterhin wurden früher bestimmte Momententensoren induzierter Beben nahe der Kontinentalen Tiefbohrung, Bayern, unter Annahme anisotroper Parameter reinterpretiert. Die Beben werden einheitlich als Scherbrüche charakterisiert, obwohl deren Momententensoren tensile Bestandteile enthalten, die als scheinbar angesehen werden. Die Resultate unterstreichen die Notwendigkeit, seismische Anisotropie zu berücksichtigen, um tensile Komponenten von Erdbeben eindeutig zu bestimmen. Ein daher neu entwickelter Inversionsalgorithmus wurde getestet und erfolgreich auf 112 Erdbeben der letzten intensiven Schwarmepisode im Jahr 2000 im Vogtland an der deutsch-tschechischen Grenze angewandt. Die Herdparameter wurden unter Verwendung isotroper und anisotroper Geschwindigkeitsmodelle ermittelt. Die Beben zeigen Lokalmagnituden zwischen 1,6 und 3,2. Sie weisen zueinander ähnliche Herdflächenlösungen mit linkslateralem Versatz auf steil einfallenden, etwa Nord-Süd orientierten Bruchflächen auf. Die Fallwinkel nehmen oberhalb 8,4km Tiefe ab. Für über 60% der betrachteten Erdbeben werden tensile Quellanteile mit Volumenvergrößerung beobachtet. Die tensilen Komponenten zeigen Abhängigkeiten von Herdzeit und -ort. Sie sind zu Beginn des Schwarms sowie in Tiefen unterhalb 8,4km besonders signifikant und nehmen später an Bedeutung ab. Abgeleitete Hauptspannungsachsen enthalten P Achsen mit nordwestlicher und T Achsen mit südwestlicher Streichrichtung. Sie ähneln denen in Mitteleuropa. Es werden tiefenabhängige Fallwinkel beobachtet. Die Änderungen erfolgen für die P Achsen graduell von 50° hin zu flacheren Fallwinkeln bei tieferen Beben. Sie erfolgen jedoch abrupt für die T Achsen von etwa 8° oberhalb einer Tiefe von etwa 8,4km zu 21° einfallend unterhalb dessen. Mit dieser Arbeit werden erstmals zeitliche und räumliche Veränderungen tensiler Quellanteile und Spannungszustände im Vogtland für Erdbeben im Jahr 2000 beobachtet. Diese haben auch dann Bestand, wenn seismische Anisotropie berücksichtigt wird. Sie können durch Fluide erklärt werden, die in die Bruchflächen eindringen. KW - Seismologie KW - Momententensor KW - Anisotropie KW - Erdbeben KW - Wellenausbreitung KW - Vogtland KW - Schwarmbeben KW - tensile Anteile KW - Hauptspannungsachse KW - earthquake swarm KW - anisotropy KW - tensile earthquakes KW - moment tensor KW - West Bohemia Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-7758 ER - TY - JOUR A1 - Passarelli, Luigi A1 - Hainzl, Sebastian A1 - Cesca, Simone A1 - Maccaferri, Francesco A1 - Mucciarelli, Marco A1 - Rößler, Dirk A1 - Corbi, Fabio A1 - Dahm, Torsten A1 - Rivalta, Eleonora T1 - Aseismic transient driving the swarm-like seismic sequence in the Pollino range, Southern Italy JF - Geophysical journal international N2 - Tectonic earthquake swarms challenge our understanding of earthquake processes since it is difficult to link observations to the underlying physical mechanisms and to assess the hazard they pose. Transient forcing is thought to initiate and drive the spatio-temporal release of energy during swarms. The nature of the transient forcing may vary across sequences and range from aseismic creeping or transient slip to diffusion of pore pressure pulses to fluid redistribution and migration within the seismogenic crust. Distinguishing between such forcing mechanisms may be critical to reduce epistemic uncertainties in the assessment of hazard due to seismic swarms, because it can provide information on the frequency-magnitude distribution of the earthquakes (often deviating from the assumed Gutenberg-Richter relation) and on the expected source parameters influencing the ground motion (for example the stress drop). Here we study the ongoing Pollino range (Southern Italy) seismic swarm, a long-lasting seismic sequence with more than five thousand events recorded and located since October 2010. The two largest shocks (magnitude M-w = 4.2 and M-w = 5.1) are among the largest earthquakes ever recorded in an area which represents a seismic gap in the Italian historical earthquake catalogue. We investigate the geometrical, mechanical and statistical characteristics of the largest earthquakes and of the entire swarm. We calculate the focal mechanisms of the M-l > 3 events in the sequence and the transfer of Coulomb stress on nearby known faults and analyse the statistics of the earthquake catalogue. We find that only 25 per cent of the earthquakes in the sequence can be explained as aftershocks, and the remaining 75 per cent may be attributed to a transient forcing. The b-values change in time throughout the sequence, with low b-values correlated with the period of highest rate of activity and with the occurrence of the largest shock. In the light of recent studies on the palaeoseismic and historical activity in the Pollino area, we identify two scenarios consistent with the observations and our analysis: This and past seismic swarms may have been 'passive' features, with small fault patches failing on largely locked faults, or may have been accompanied by an 'active', largely aseismic, release of a large portion of the accumulated tectonic strain. Those scenarios have very different implications for the seismic hazard of the area. KW - Seismicity and tectonics KW - Statistical seismology KW - Dynamics: seismotectonics Y1 - 2015 U6 - https://doi.org/10.1093/gji/ggv111 SN - 0956-540X SN - 1365-246X VL - 201 IS - 3 SP - 1553 EP - 1567 PB - Oxford Univ. Press CY - Oxford ER - TY - JOUR A1 - Malek, J. A1 - Jansky, J. A1 - Novotny, O. A1 - Rößler, Dirk T1 - Vertically inhomogeneous models of the upper crustal structure in the West-Bohemian seismoactive region inferred from the celebration 2000 refraction data N2 - As part of the international refraction measurements in Central Europe in the year 2000, three profiles traversed the region of earthquake swarms in West-Bohemia/Vogtland. The shots were also recorded at the permanent stations of the local seismic networks. The travel times of P-waves, observed in the West-Bohemian region, are discussed and interpreted in the present paper. In general, significantly lower P-wave velocities were found in the Saxothuringian (northern) part of the studied area than in the adjacent southern parts. The observed travel times are interpreted separately for the individual geological units, in particular for the plutons, crystallinicum, and the Marianske Lazne(Marienbad) Complex. After smoothing the selected data using rational approximations, the Wiechert-Herglotz method was used to compute vertically inhomogeneous velocity models. The characteristic features of the derived models are relatively low P-wave velocities at the surface and prominent velocity increases within the uppermost crust down to a depth of about one kilometer Y1 - 2004 SN - 0039-3169 ER - TY - JOUR A1 - Kieling, Katrin A1 - Rößler, Dirk A1 - Krüger, Frank T1 - Receiver function study in northern Sumatra and the Malaysian peninsula JF - Journal of seismology N2 - In this receiver function study, we investigate the structure of the crust beneath six seismic broadband stations close to the Sunda Arc formed by subduction of the Indo-Australian under the Sunda plate. We apply three different methods to analyse receiver functions at single stations. A recently developed algorithm determines absolute shear-wave velocities from observed frequency-dependent apparent incidence angles of P waves. Using waveform inversion of receiver functions and a modified Zhu and Kanamori algorithm, properties of discontinuities such as depth, velocity contrast, and sharpness are determined. The combination of the methods leads to robust results. The approach is validated by synthetic tests. Stations located on Malaysia show high-shear-wave velocities (V (S)) near the surface in the range of 3.4-3.6 km s (-aEuro parts per thousand 1) attributed to crystalline rocks and 3.6-4.0 km s (-aEuro parts per thousand 1) in the lower crust. Upper and lower crust are clearly separated, the Moho is found at normal depths of 30-34 km where it forms a sharp discontinuity at station KUM or a gradient at stations IPM and KOM. For stations close to the subduction zone (BSI, GSI and PSI) complexity within the crust is high. Near the surface low V (S) of 2.6-2.9 km s (-aEuro parts per thousand 1) indicate sediment layers. High V (S) of 4.2 km s (-aEuro parts per thousand 1) are found at depth greater than 6 and 2 km at BSI and PSI, respectively. There, the Moho is located at 37 and 40 km depth. At station GSI, situated closest to the trench, the subducting slab is imaged as a north-east dipping structure separated from the sediment layer by a 10 km wide gradient in V (S) between 10 and 20 km depth. Within the subducting slab V (S) a parts per thousand aEuro parts per thousand 4.7 km s (-aEuro parts per thousand 1). At station BSI, the subducting slab is found at depth between 90 and 110 km dipping 20A degrees +/- 8A degrees in approximately N 60A degrees E. A velocity increase in similar depth is indicated at station PSI, however no evidence for a dipping layer is found. KW - Receiver functions KW - Absolute shear-wave velocity KW - Sumatra KW - Subduction zone structure Y1 - 2011 U6 - https://doi.org/10.1007/s10950-010-9222-7 SN - 1383-4649 VL - 15 IS - 2 SP - 235 EP - 259 PB - Springer CY - Dordrecht ER - TY - JOUR A1 - Hiemer, Stefan A1 - Scherbaum, Frank A1 - Rößler, Dirk A1 - Kühn, Nicolas T1 - Determination of tau(0) and Rock Site kappa from Records of the 2008/2009 Earthquake Swarm in Western Bohemia JF - Seismological research letters Y1 - 2011 U6 - https://doi.org/10.1785/gssrl.82.3.387 SN - 0895-0695 VL - 82 IS - 3 SP - 387 EP - 393 PB - Seismological Society of America CY - El Cerrito ER - TY - JOUR A1 - Hiemer, Stefan A1 - Rößler, Dirk A1 - Scherbaum, Frank T1 - Monitoring the West Bohemian earthquake swarm in 2008/2009 by a temporary small-aperture seismic array JF - Journal of seismology N2 - The most recent intense earthquake swarm in West Bohemia lasted from 6 October 2008 to January 2009. Starting 12 days after the onset, the University of Potsdam monitored the swarm by a temporary small-aperture seismic array at 10 km epicentral distance. The purpose of the installation was a complete monitoring of the swarm including micro-earthquakes (M (L) < 0). We identify earthquakes using a conventional short-term average/long-term average trigger combined with sliding-window frequency-wavenumber and polarisation analyses. The resulting earthquake catalogue consists of 14,530 earthquakes between 19 October 2008 and 18 March 2009 with magnitudes in the range of -aEuro parts per thousand 1.2 a parts per thousand currency signaEuro parts per thousand M (L) a parts per thousand currency signaEuro parts per thousand 2.7. The small-aperture seismic array substantially lowers the detection threshold to about M (c) = -aEuro parts per thousand 0.4, when compared to the regional networks operating in West Bohemia (M (c) > 0.0). In the course of this work, the main temporal features (frequency-magnitude distribution, propagation of back azimuth and horizontal slowness, occurrence rate of aftershock sequences and interevent-time distribution) of the recent 2008/2009 earthquake swarm are presented and discussed. Temporal changes of the coefficient of variation (based on interevent times) suggest that the swarm earthquake activity of the 2008/2009 swarm terminates by 12 January 2009. During the main phase in our studied swarm period after 19 October, the b value of the Gutenberg-Richter relation decreases from 1.2 to 0.8. This trend is also reflected in the power-law behavior of the seismic moment release. The corresponding total seismic moment release of 1.02x10(17) Nm is equivalent to M (L,max) = 5.4. KW - Swarm earthquakes KW - West Bohemia KW - Array seismology KW - Frequency-magnitude distribution Y1 - 2012 U6 - https://doi.org/10.1007/s10950-011-9256-5 SN - 1383-4649 VL - 16 IS - 2 SP - 169 EP - 182 PB - Springer CY - Dordrecht ER - TY - JOUR A1 - Donner, Stefanie A1 - Rößler, Dirk A1 - Krüger, Frank A1 - Ghods, Abdolreza A1 - Strecker, Manfred T1 - Segmented seismicity of the M (w) 6.2 Baladeh earthquake sequence (Alborz Mountains, Iran) revealed from regional moment tensors JF - Journal of seismology N2 - The M (w) 6.2 Baladeh earthquake occurred on 28 May 2004 in the Alborz Mountains, northern Iran. This earthquake was the first strong shock in this intracontinental orogen for which digital regional broadband data are available. The Baladeh event provides a rare opportunity to study fault geometry and ongoing deformation processes using modern seismological methods. A joint inversion for hypocentres and a velocity model plus a surface-wave group dispersion curve analysis were used to obtain an adapted velocity model, customised for mid- and long-period waveform modelling. Based on the new velocity model, regional waveform data of the mainshock and larger aftershocks (M (w) a parts per thousand yen3.3) were inverted for moment tensors. For the Baladeh mainshock, this included inversion for kinematic parameters. All analysed earthquakes show dominant thrust mechanisms at depths between 14 and 26 km, with NW-SE striking fault planes. The mainshock ruptured a 28A degrees south-dipping area of 24 x 21 km along a north-easterly direction. The rupture plane of the mainshock does not coincide with the aftershock distribution, neither in map view nor with respect to depth. The considered aftershocks form two main clusters. The eastern cluster is associated with the mainshock. The western cluster does not appear to be connected with the rupture plane of the mainshock but, instead, indicates a second activated fault plane dipping at 85A degrees towards the north. KW - Alborz Mountains KW - Iran KW - Baladeh earthquake KW - Inversion for moment tensors KW - Seismotectonics Y1 - 2013 U6 - https://doi.org/10.1007/s10950-013-9362-7 SN - 1383-4649 VL - 17 IS - 3 SP - 925 EP - 959 PB - Springer CY - Dordrecht ER - TY - JOUR A1 - Donner, Stefanie A1 - Ghods, Abdolreza A1 - Krüer, Frank A1 - Rößler, Dirk A1 - Landgraf, Angela A1 - Ballato, Paolo T1 - The Ahar-Varzeghan Earthquake Doublet (M-w 6.4 and 6.2) of 11 August 2012: Regional Seismic Moment Tensors JF - Bulletin of the Seismological Society of America N2 - On 11 August 2012 an earthquake doublet (M-w 6.4 and 6.2) occurred near the city of Ahar, northwest Iran. Both events were only 6 km and 11 minutes apart, producing a surface rupture of about 12 km in length. Historical and modern seismicity has so far been sparse in this area. Spatially, the region represents a transitional zone between different tectonic domains, including compression in Iran, westward extrusion of the Anatolian plate, and thrusting beneath the Caucasus. In this study, we inverted the surface waveforms of the two mainshocks and 11 aftershocks (M-w >= 4.3) to obtain regional seismic moment tensors. The earthquakes analyzed can be grouped into pure strike slip (including the first mainshock) and oblique reverse mechanisms (including the second mainshock). The sequence provides information about faulting mechanisms at the spatial scale of the entire rock volume affected by the earthquake doublet, including coinciding deformation on minor faults (sub) parallel to the main fault and Riedel shears. It occurred on a so far unknown fault structure, which we call the Ahar fault. Alongside the seismological data, we used geological maps, satellite images, and digital elevation data to analyze the geomorphology of the region. Our analysis suggests that the adjacent North Tabriz fault, which accomodates up to 7 mm/yr of right-lateral strike-slip faulting, does not compensate the entire lateral shear strain, and that part of it is compensated farther north. Combined, our results suggest a temporally and spatially complex style of deformation (reverse and strike slip) overprinting older reverse deformation. Y1 - 2015 U6 - https://doi.org/10.1785/0120140042 SN - 0037-1106 SN - 1943-3573 VL - 105 IS - 2A SP - 791 EP - 807 PB - Seismological Society of America CY - Albany ER -